VoIP Micro-Analog & Adapter SmartLink™ M-ATA

Quickly and easily converts any phone or fax machine to VoIP for residential and telecommuter applications.

Ultra-miniature he SmartLink Micro Analog Telephone The user friendly web interface offers two lev- Smallest full-function analog telephone adapter Adapter provides connectivity for ana- els of configuration: level one covers basic available today! log phones and to a home, home subscriber-specific parameters, level two T office or corporate LAN. Connecting to any offers advanced settings for the transport net- Supports over 20 voice calling features analog phone, fax or PBX, the SmartLink work. Configuration and firmware can be Call waiting, call conference, caller ID, hotline, product is a cost effective solution for small downloaded from a centralized TFTP or HTTP distinctive ring and more! offices and telecommuters to access server.

Internet-based telephone services and corpo- The M-ATA is SIP standard compliant. DHCP, PPPoE rate intranet systems across established LAN Analog phones attached to the SmartLink Provides maximum connectivity across fire- and connections like DSL and cable walls and transport networks. can use advanced calling features such as modems. call forwarding, caller ID, 3-way calling, call

holding, call retrieval, and call transfer. SIP Signaling The M-ATA provides one (RJ-45)

Deploy into any multimedia, interactive, or port and one FXS (RJ-11) analog phone port softswitch network with the leading call and VoIP-enable your existing for quick and easy interconnection to the session signaling protocols. fax machines local LAN. LEDs show at-a-glance the status Integrated support for T.38 brings fax of the system, LAN, WAN, and phone ports. Toll Quality CODECs & T.38 fax machines into the low-cost world of VoIP.

Uses G.723 or G.729 for low- appli- The M-ATA supports G3 analog fax A full suite of IP features (DHCP) are avail- cations or standard G.711 or G.726 CODECs for machines and converts fax signaling into able to maximize universal connectivity. toll-quality voice.Uses G.723 or G.729 for low- T.38 or G.711 pass through fax for delivery bandwidth applications or standard G.711 or VLAN tagging and prioritization enables over an Intranet or the Internet. Just config- G.726 CODECs for toll-quality voice. voice traffic to be handled before data traf- ure the M-ATA, plug in the fax machine’s fic, ensuring higher quality voice calls. phone line, add a LAN connection, and the Centralized management Support for PPPoE tunneling simplifies M-ATA is ready to go! HTTP/SNMP manageable from any location. extending corporate intranet services to telecommuters. Visit www.patton.com for more information.

Proven Patton design, Patton supported FXS port

10/100Base-T Ethernet LAN port

Yes, they really are this small!

These feature-packed tele- phone adapters are small 100–240 VAC external power supply enough to fit in your pocket!

Typical Application Patton’s Micro-Analog Telephone Adapter provides seamless access to Internet telephony and data services. The M-ATA connects to any broad- band access provider via a cable or xDSL modem.

Connect via network, M-ATA xDSL Modem, or

FXS Phone Corporate Corporate IP-PBX Intranet

Voice Internet xDSL Modem Service Provider M-ATA

FXS Fax Cable Modem Internet

Specifications* Voice Connectivity • Configurable dejitter buffer • DTMF in- on/off • IP URL dialing • Message Operating humidity 2-wire Loopstart, RJ-11/12 • Short haul band & out-of-band • Configurable waiting indication • Self-caller ID block 5–80% (non-condensing) loop 1.1 km @3REN • Caller-ID Type- transmit packet length • RTP/RTCP • Speed dial • Voicemail message 1/2 FSK and ITU V.23/Bell 202 genera- (RFC 1889) • STUN retrieval • Warmline calling Power tion Fax and Modem Support IP Services 100–240 VAC (50/60 Hz) Connectivity G.711 transparent fax • T.38 fax relay DHCP client • PPPoE • Programmable 1 10/100Base-TX Full (9.6 k, 14.4 k) static routes • ICMP redirect (RFC 792); Compliance Duplex/Autosensing Ethernet RJ-45 Packet fragmentation • VLAN sup- EMC compliance: EN55022 and Voice Services/Features port 802.1p/q EN55024 • Safety compliance: EN Anonymous CallerID block • Call block- Voice Processing 50950 • CE compliance • FCC Part 15 ing • Call forward - on busy • Call for- Management (signalling dependent) Class B SIP • Voice CODECS (G.711 A-Law/μ- ward - selective • Call forward - uncon- Browser configuration interface • Law (64 kbps); G.726 (ADPCM 40, 32, ditional • Call hold/retrieve • Call return Multilevel security access • TFTP & Dimensions 24, 16 kbps); G.723.1 (5.3 or 6.3 kbps); • Call transfer - blind • Call transfer - HTTP configuration & firmware loading 3.6L x 2.1W x 0.78H in. (9.0L x 5.3W x and G.729ab (8 kbps) • G.168 echo with consultation • Call waiting/retrieval • SNMP v2 agent (MIB II and private cancellation • 2 parallel voice connec- • Caller-ID • Conference drop • MIB) • Syslog support 1.9H cm) tions • DTMF detection and generation • Conferencing (3-way calling) • Carrier tone detection and generation • Distinctive ring • Do not disturb • Operating Temperature Weight Silence suppression and comfort noise Hotline calling • Incoming CallerID 0–40°C (32–104°F) 0.2 lbs (0.09 kg)

Certified distributor of Patton

Camerastraat 2 1322 BC Almere www.tiptel.nl [email protected] T 31(0)36 5366650