SNAP-TITE HOSE MUNICIPAL HOSE GUIDE SNAP-TITE HOSE MUNICIPAL HOSE MUNICIPAL
100% MADE IN USA HOSE GUIDE
ATTACK HOSE AT SNAP-TITE HOSE, we’re dedicated to embodying the heritage and tradition of the fire service along with all the markets we serve by offering SUPPLY LINE HOSE a complete line of products coupled with an unparalleled commitment to safety, reliability and value. Snap-tite Hose is proud to manufacture the LOW PRESSURE HOSE following industry-leading brands: Snap-tite Hose, National Fire Hose, PONN, and Firequip … all engineered, manufactured and tested with SOFT SUCTION HOSE integrity and our customers in mind. It's just how we do business.
HARD SUCTION HOSE From large diameter supply hose to firefighting attack lines, and from fluid transfer hose to irrigation hose, Snap-tite Hose manufactures a hose for HIGH-RISE HOSE every application using a variety of jackets and liners in a wide range of diameters. We design and manufacture hoses to meet or exceed industry BOOSTER HOSE standards under ISO 9001:2015-controlled processes with our customers'
COMPRESSED AIR FOAM needs for performance and safety in our minds everyday. SYSTEM HOSE (CAFS)
POTABLE WATER HOSE UL/ULC LISTED
FORESTRY HOSE
KLEAN HOSE CONTENTS
SNAP-TITE HOSE FIREQUIP
SNAP-TITE DJ600 LDH...... 24 TPX (TPX) ...... 2 FIREQUIP
SNAP-TITE WILDLAND ULTRA FORESTRY...... 25 HFX (HFX)...... 4 FIREQUIP
SNAP-TITE FIRE ENGINE BOOSTER ...... 26 ATX (ATX)...... 6 FIREQUIP REEL LITE BOOSTER...... 27 SNAP-TITE LD (LD)...... 7 FIREQUIP MAXI-FLEX...... 28 SNAP-TITE UTX (UTX)...... 8 FIREQUIP TANK-FLEX ...... 28
FIREQUIP PONN HOSE RACK & REEL...... 29
PONN CONQUEST (FC) ...... 10
PONN OTHER SUPREME (FS)...... 12
PONN OUR VISION...... 30 GLADIATOR (FG)...... 14 ™ HOSE RECORD VAULT ...... 31 PONN ™ PONN GLADIATOR NF (FGN)...... 16 DURA-COTE ...... 31
HOSE CROSS REFERENCES...... 31 NATIONAL FIRE HOSE INNOVATION AT SNAP-TITE HOSE...... 32 NATIONAL FIRE HOSE ™ N-DURA (NP)...... 17 KLEAN HOSE ...... 32
NATIONAL FIRE HOSE DEMO TRUCK ...... 33 TRIPLE DUTY (TD)...... 18 NATIONAL FIRE HOSE COUPLINGS ...... 34 DURA-PAK (DP) ...... 19 NFPA PRESSURE RATING DETAILS...... 35
FIREQUIP 10 YEAR WARRANTY...... 35 FIREQUIP LIFETIME DELAMINATION WARRANTY...... 35 COMBAT MASTER FLOW...... 20 ...... FIREQUIP CHOOSING THE RIGHT HOSE 36 VICTORY SUPREME...... 21 FIRE HOSE CARE & HANDLING...... 36 FIREQUIP DJ800...... 22 ATTACK HOSE COMPARATIVE GUIDE...... 37
FIREQUIP ATTACK LITE POLY...... 23
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 1 SNAP-TITE TPX ATTACK UNIQUE 3-PLY CONSTRUCTION Traditionally, manufactured extruded hose can vary in thickness, becoming bulky and heavy. TPX utilizes a 3-ply design where the ribbed
SUPPLY cover and smooth nitrile liner are extruded independently. The cover is inserted inside the tight-weave reinforcement, vulcanized, and then turned inside out. The liner is then inserted and the hose is vulcanized for a second time to form a bond of all three plies, guaranteeing a consistent, LOW PSI compact hose wall. The Snap-tite TPX is highly resistant to both conductive and radiant heat. FEATURES: • 3-ply rubber municipal fire hose • Remains flexible to temperatures SOFT with both the cover and liner made as low as -20ºF (-29ºC) and is CONSTRUCTION SUCTION of heavy duty nitrile rubber, high resistant to ozone, oxidation 3-Ply Nitrile Cover/Liner tensile strength tightly woven and most chemicals and Polyester Reinforcement polyester reinforcement for petrochemicals. TEMPERATURE RANGE maximum durability and flexibility. • Tighter weave allows more USA MADE -20ºF to 200ºF (-29ºC to 93ºC) • Smooth liner keeps friction loss to resistance to puncture while also a minimum. being easier to pack and store. COUPLINGS Aluminum or Brass NH/NST or IPT • Nitrile rubber cover greatly • Lays flat and needs less hose bed Threaded & Aluminum Storz increases abrasion resistance, space than typical extruded hose. COLORS KLEAN provides long service life and the • Manufactured in accordance with HOSE Yellow Red Orange tightly woven reinforcement resists NFPA 1961 Standard, latest edition puncture. within our ISO-9001:2015 certified • Suitable for attack, supply and soft quality assurance system. sleeve suction applications.
2 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 HOSE SIZING AND SPECIFICATIONS
SIZE SERVICE TEST PROOF TEST BURST WEIGHT FLAT WIDTH BOWL SIZE CERTIFICATION (FOR 50' COUPLED) AVAILABLE
IN PSI (kPa) PSI (kPa) PSI (kPa) LBS (KG) IN IN
1 ³⁄⁴" 400 (2760) 800 (5515) 1200 (8275) 19 (9) 3.25" 2 - 1/16"
2" 400 (2760) 800 (5515) 1200 (8275) 24 (10.9) 3.60" 2 - 5/16"
2 ¹⁄²" 330 (2275) 660 (4550) 1000 (6900) 33 (15) 4.30" 2 - 13/16"
3" 300 (2070) 600 (4140) 900 (6200) 37 (16.8) 5.10" 3 - 3/8"
50': 48 (20.9) 4" 250 (1725) 500 (3450) 750 (5170) 100': 90 (40.8) 6.60" 4 - 5/16" UL, ULC 50': 62 (27.2) 5" 225 (1550) 450 (3100) 675 (4650) 100': 116 (52.6) 8.20" 5 - 5/16" UL, ULC
6" 200 (1380) 400 (2760) 600 (4140) 72 (32.7)* 9.90" 6 - 5/16"
*6" Weight uncoupled Coupled weights As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. HOW TO ORDER
TYPE HOSE ID BY HOSE LENGTH COLOR COUPLING SIZE THREAD TYPE COUPLING MATERIAL OPTIONS
17 = 1 ¾" 15 = 1 ½" 20 = 2" 25 = 2 ¹⁄²" 25 = 2 ¹⁄ " Y = Yellow 30 = 3" N = NH Blank = (Aluminum) ² 50 = 50' UL = UL Labeled TPX 30 = 3" X R = Red 35 = 3 ¹⁄ " I = IPT BR = Brass Rocker Lug 100 = 100' ² ULC = UL Canada Labeled 40 = 4" O = Orange 40 = 4" S = Storz BP = Brass Pin Lug 50 = 5" 50 = 5" 60 = 6" 60 = 6" Part No. Example: TPX40X50Y40S = TPX Hose, 4" ID by 50' Length, Yellow, 4" Storz Aluminum Coupling
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 3 ATTACK SNAP-TITE HFX EXTRUDED NITRILE RUBBER ATTACK/SUPPLY HOSE HFX is a nitrile thru-the-weave, rubber covered fire hose that utilizes SUPPLY polyester and nylon 6.6 yarn in the reinforcing jacket. Under pressure, the polyester keeps the hose from “snaking” where the nylon allows for controlled dilation, reducing friction loss and generating higher flow rates. LOW PSI Our special rubber compound provides a tough cover that resists heat, abrasion, snags and hot embers. The interlocking matrix also means no adhesives are used and there is a permanent bond to all the warp and SOFT weft yarns. The Snap-tite HFX is highly resistant to both conductive and SUCTION radiant heat. FEATURES: USA MADE • Extruded thru-the-weave, • Highly resistant to both contact nitrile rubber fire hose. The and radiant heat. CONSTRUCTION reinforcement is made with a • Suitable for attack, supply, Extruded Nitrile Cover/Liner blend of circular woven, twill soft sleeve suction and relay Polyester/Nylon Reinforcement weave, polyester and nylon fibers. applications. KLEAN • The ribs on the cover surface TEMPERATURE RANGE HOSE • Unique extruded thru-the-weave greatly increase abrasion construction provides a flexible, -20ºF to 200ºF (-29ºC to 93ºC) resistance and help provide a long easy to maneuver hose that is easy COUPLINGS service life. to pack. Aluminum or Brass NH/NST or IPT • Remains flexible to temperatures • Manufactured in accordance with Threaded & Aluminum Storz as low as -20ºF (-29ºC) and is NFPA 1961 Standard, latest edition APPROVALS resistant to ozone, oxidation UL/ULC within our ISO-9001:2015 certified Most sizes UL & ULC (UL Canada) Listed LISTED and most chemicals and quality assurance system. petrochemicals. COLORS Yellow Red
4 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 HOSE SIZING AND SPECIFICATIONS
SIZE SERVICE TEST PROOF TEST BURST WEIGHT FLAT WIDTH BOWL SIZE CERTIFICATION (FOR 50' COUPLED) AVAILABLE
IN PSI (kPa) PSI (kPa) PSI (kPa) LBS (KG) IN IN
1" 300 (2070) 600 (4140) 900 (6200) 7 (3.2) 1.75" 1 - 3/16"
1 ¹⁄²" 300 (2070) 600 (4140) 900 (6200) 16 (7.3) 2.75" 1 - 13/16" UL, ULC
1 ³⁄⁴" 300 (2070) 600 (4140) 900 (6200) 19 (8.6) 3.20" 2 - 1/16" UL, ULC 2" 300 (2070) 600 (4140) 900 (6200) 21 (9.5) 3.50" 2 - 5/16" UL, ULC
2 ¹⁄²" 300 (2070) 600 (4140) 900 (6200) 28 (12.7) 4.25" 2 - 13/16" UL, ULC 3" 300 (2070) 600 (4140) 900 (6200) 34 (15.4) 5.00" 3 - 3/8"
50': 48 (21.8) 4" 230 (1585) 460 (3171) 700 (4825) 6.50" 4 - 5/16 UL, ULC 100': 90.2 (40.9)
50': 60 (27.2) 5" 225 (1550) 450 (3102) 675 (4650) 8.20" 5 - 5/16" UL, ULC 100': 112 (50.8)
Coupled weights As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. HOW TO ORDER
COUPLING TYPE HOSE ID BY HOSE LENGTH COLOR SIZE THREAD TYPE COUPLING MATERIAL OPTIONS
10 = 1" 10 = 1" 15 = 1 ¹⁄²" 15 = 1 ¹⁄²" 17 = 1 ³⁄ " 20 = 2" ⁴ N = NH Blank = (Aluminum) 20 = 2" 50 = 50' Y = Yellow 25 = 2 ¹⁄ " UL = UL Labeled HFX X ² I = IPT BR = Brass Rocker Lug 25 = 2 ¹⁄ " 100 = 100' R = Red 30 = 3" ULC = UL Canada Labeled ² S = Storz BP = Brass Pin Lug 30 = 3" 40 = 4" 40 = 4" 45 = 4 ¹⁄²" 50 = 5" 50 = 5"
Part No. Example: HFX40X50Y40S = HFX Hose, 4" ID by 50' Length, Yellow, 4" Storz Aluminum Coupling
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 5 SNAP-TITE ATX HIGH PRESSURE NITRILE RUBBER ATTACK/SUPPLY HOSE ATTACK Manufactured in a similar process as TPX, ATX utilizes a 3-ply design where the cover and liner are extruded independently and double vulcanized to guarantee a consistent, compact hose wall. The polyester reinforcement can then be woven tighter, making this hose more resistant to puncture while also being easier to pack SUPPLY and store. ATX has a stronger jacket which increases the service test pressure of the LDH sizes to 300 psi (2070 kPa). The Snap-tite ATX is highly resistant to both conductive and radiant heat. FEATURES: SOFT • 3-ply rubber municipal fire hose with both the cover and liner made of heavy SUCTION duty nitrile rubber, high tensile strength tightly woven polyester reinforcement for maximum durability and flexibility. • Smooth liner keeps friction loss to a minimum. CONSTRUCTION USA MADE • Nitrile rubber cover greatly increases abrasion resistance, provides long 3-Ply Nitrile Rubber Cover/Liner service life and the tightly woven reinforcement resists puncture. Polyester Reinforcement • Remains flexible to temperatures as low as -20ºF (-29ºC) and is resistant to TEMPERATURE RANGE ozone, oxidation and most chemicals and petrochemicals. -20ºF to 200ºF (-29ºC to 93ºC) • Suitable for high pressure attack, supply and relay applications. KLEAN COUPLINGS HOSE • Suitable for pumping to sprinklers and standpipes, industrial firefighting and Aluminum NH/NST or IPT Threaded & supplying aerial devices. Aluminum Storz • Manufactured in accordance with NFPA 1961 Standard, latest edition within COLORS our ISO-9001:2015 certified quality assurance system. Yellow Red Orange
HOSE SIZING AND SPECIFICATIONS
WEIGHT SIZE SERVICE TEST PROOF TEST BURST (FOR 50' COUPLED) FLAT WIDTH BOWL SIZE
IN PSI (kPa) PSI (kPa) PSI (kPa) LBS (KG) IN IN 50': 60 (27.2) 4" 300 (2070) 600 (4140) 900 (6200) 7.00" 4 - 7/16" 100': 114 (51.7) 50': 81 (36.7) 5" 300 (2070) 600 (4140) 900 (6200) 8.75" 5 - 5/16" 100': 154 (69.8) 6" 300 (2070) 600 (4140) 900 (6200) 102 (46.4)** 10.25" 6 - 1/2" Coupled weights **Weight uncoupled for 50' length. As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. HOW TO ORDER
TYPE HOSE ID BY HOSE LENGTH COLOR COUPLING SIZE THREAD TYPE COUPLING MATERIAL
40 = 4" Y = Yellow 40 = 4" N = NH 50 = 50' ATX 50 = 5" X R = Red 50 = 5" I = IPT Aluminum 100 = 100' 60 = 6" O = Orange 60 = 6" S = Storz Part No. Example: ATX40X50YM40S = ATX Hose, 4" ID by 50' Length, Yellow, 4" Storz Aluminum Coupling 6 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 SNAP-TITE LD LIGHTWEIGHT EXTRUDED RUBBER HOSE
ATTACK LD is a premium quality, nitrile rubber covered fire hose that is manufactured using a unique process which permanently bonds the nylon reinforcement to the nitrile rubber cover/liner. LD is an easily coiled, non- kinking, high flow, lightweight hose that also resists abrasion, chemicals, HIGH-RISE and weathering by ozone. CONSTRUCTION FEATURES: Nitrile Rubber Cover • Extruded thru-the-weave, nitrile rubber fire hose. The reinforcement USA MADE Liner with Nylon is made with circular woven, twill weave, nylon fibers. Reinforcements • Highly resistant to both conductive and radiant heat. TEMPERATURE RANGE • Designed using an external elastomeric coating that provides very low -20 degress to 200 degrees F (-29C to 95C) absorption of liquids. KLEAN COUPLINGS HOSE • Hose remains flexible to temperatures as low as -5F (-20C) and is Aluminum or brass NH/NST or IPT resistant to ozone, oxidation, and most chemicals and petrochemicals. Threaded, • Maintenance free, no drying required, and is easily cleaned. Aluminum Storz • Manufactured in accordance with NFPA 1961 Standard, latest edition COLORS Yellow Red Blue within our ISO-9001:2015 certified quality assurance system. HOSE SIZING AND SPECIFICATIONS
SIZE SERVICE TEST PROOF TEST BURST WEIGHT BOWL SIZE CERTIFICATION (FOR 50' COUPLED) AVAILABLE
IN PSI (kPa) PSI (kPa) PSI (kPa) LBS (KG) IN 1" 300 (2070) 600 (4140) 900 (6200) 7 (3.2) 1 - 3/16" UL/ULC LISTED 1 ½" 300 (2070) 600 (4140) 900 (6200) 10 (4.5) 1 - 13/16" 1 ¾" 300 (2070) 600 (4140) 900 (6200) 13 (5.9) 2 - 1/16" 2" 300 (2070) 600 (4140) 900 (6200) 15 (6.8) 2 - 5/16" 2 ½" 300 (2070) 600 (4140) 900 (6200) 19 (8.6) 2 - 13/16" UL, ULC 2 ¾" 250 (1725) 500 (3450) 770 (5310) 21 (9.5) N/A 3 ½" 200 (1379) 400 (2758) 600 (4137) 24 (10.9) N/A As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. HOW TO ORDER
TYPE HOSE ID BY HOSE LENGTH COLOR COUPLING SIZE THREAD TYPE COUPLING MATERIAL
10 = 1" 10 = 1" N = NH Blank = Aluminum 15 = 1 - 1/2" 50 = 50' Y = Yellow BR = Brass Rocker Lug 15 = 1 1/2" I = IPT LD 17 = 1 - 3/4" X 75 = 75' R = Red BP = Brass Pin Lug 20 = 2" BW = British 20 = 2" 100 = 100' B = Blue G = Gunmetal (BW 25 = 2 1/2" Instantaneous Thread ONY) 25 = 2 1/2"
Part No. Example: LD17X50R15NBR = LD Hose, 1-3/4" ID by 50' Length, Red, 1-1/2" NS/NST Brass Rocker Lug Coupling
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 7 SUPPLY SNAP-TITE UTX KRYPTONITE (UTX) LDH gives fire departments that extra edge, in flow and support — all in a high-visibility lightweight supply line. A tough polyurethane outer cover combines with an exclusive thru-the-weave SOFT liner to offer greater resistance to punctures and abrasion. But it doesn’t SUCTION stop there. Kryptonite is compact, taking up less room in the hose bed, and durable — with higher resistance to oils, chemicals and ozone. Snag proof and kink resistant, Kryptonite will not mildew or rot and is guaranteed for life to never delaminate. POTABLE WATER FEATURES Typical rubber extruded fire hose can vary in thickness, becoming bulky and heavy. Kryptonite™ LDH incorporates a circular woven polyester jacket that is completely encapsulated by a special urethane polymer that provides superior abrasion and USA MADE puncture resistance while remaining extremely light and service worthy. • Kryptonite™ weighs 20% less than • Remains flexible to -50ºF (-46ºC). conventional rubber supply hose. • Resists ozone, oxidation and most CONSTRUCTION • Reinforced woven polyester chemical/petroleum products. Extruded Thru-the-Weave Polyurethane KLEAN jacket provides increased puncture • Manufactured in accordance with TEMPERATURE RANGE HOSE resistance. NFPA 1961 Standard, latest edition. -50ºF to 160ºF (-46ºC to 71ºC) • Extruded thru-the-weave • Made in USA to ISO-9001:2015 COUPLINGS polyurethane construction and certified quality management Aluminum NH/NST or IPT Threaded & ultra smooth liner minimizes system. Aluminum Storz friction loss. COLORS • Engineered to deliver more flow Hi-Viz Green Blaze Orange and more efficient packability.
8 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 HOSE SIZING AND SPECIFICATIONS
SIZE SERVICE TEST PROOF TEST BURST WEIGHT FLAT WIDTH BOWL SIZE (FOR 50' & 100' COUPLED)
IN PSI (kPa) PSI (kPa) PSI (kPa) LBS (KG) IN IN 50': 40 (18.1) 4" 200 (1380) 400 (2760) 600 (4140) 6 - 1/4" 4 ⁵⁄ " 100': 73 ( 33.1) ¹⁶
50': 52 (23.6) 5" 200 (1380) 400 (2760) 600 (4140) 7 - 3/4" 5 ⁵⁄ " 100': 95 (43.1) ¹⁶
Coupled weights As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. HOW TO ORDER
TYPE HOSE ID BY HOSE LENGTH COLOR COUPLING SIZE THREAD TYPE COUPLING MATERIAL
N = NH 40 = 4" 50 = 50' G = Hi-Viz Green 40 = 4" UTX X I = IPT Aluminum 50 = 5" 100 = 100' O = Blaze Orange 50 = 5" S = Storz
Part No. Example: UTX50X100G50S = Kryptonite Hose, 5" ID by 100' Length, Hi-Viz Green, 5" Storz Aluminum Coupling
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 9 ATTACK PONN CONQUEST ™ LOW PSI POLYESTER DOUBLE JACKET ATTACK/SUPPLY HOSE Looking for a hose to flow a tremendous amount of water? You’ve found it with CONQUEST! Today’s fires are hotter and more water is needed at the nozzle to knock them down fast. Conquest meets that challenge every SUPPLY day. Our patented thru-the-weave extruded polyurethane liner has an incredibly smooth surface that enhances water flow. Typical friction loss reductions of over 50% compared to other hose designs — deliver more SOFT water at standard operating pressure. SUCTION FEATURES
• 100% high tenacity ring-spun polyester outer jacket covering an extruded thru-the-weave polyurethane inner hose. NO ADHESIVE IS USED and the HIGH-RISE lining will never delaminate. • Exclusive Dura-Cote™ treatment (see page 31 for more information). • Hose remains flexible to temperatures as low as -40ºF (-40ºC) and meets all CAFS NFPA requirements for ozone resistance. HOSE COLORS Yellow Red Blue Orange • Passes 34" doorway kink test at 50 psi (345 kPa) nozzle pressure. • Suitable for CAFS and foam concentrates. Green Tan White POTABLE • Optional color-coded stripe of one contrasting color can be woven into the (coated) WATER outer jacket running the full length of the hose for identification purposes. • Manufactured in accordance with NFPA 1961 Standard, latest edition within STRIPE COLORS our ISO-9001:2015 certified quality assurance system. Yellow Red Blue Black USA MADE CONSTRUCTION TEMPERATURE RANGE Green Polyester Double Jacket -40ºF to 150ºF (-40ºC to 65ºC) Extruded Polyurethane Inner Liner COUPLINGS (Thru-the-Weave) Aluminum NH/NST or IPT Threaded & UL/ULC Aluminum Storz LISTED
10 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 HOSE SIZING AND SPECIFICATIONS
SIZE SERVICE TEST PROOF TEST BURST WEIGHT FLAT WIDTH BOWL SIZE CERTIFICATION (FOR 50' COUPLED) AVAILABLE
IN PSI (kPa) PSI (kPa) PSI (kPa) LBS (KG) IN IN
1 ³⁄⁴" 400 (2760) 800 (5515) 1200 (8275) 19 (8.6) 3.20" 2 - 3/16" UL, ULC
2" 400 (2760) 800 (5515) 1200 (8275) 21 (9.5) 3.40" 2 - 5/16"
2 ¹⁄²" 400 (2760) 800 (5515) 1200 (8275) 30 (13.6) 4.30" 2 - 7/8" UL, ULC
3" 300 (2070) 600 (4140) 900 (6200) 35 (15.9) 5.40" 3 - 9/16"
50': 58 (26.3) 4" 300 (2070) 600 (4140) 900 (6200) 6.90" 4 - 17/32" 100': 108 (49.0)
50': 69 (31.3) 5" 300 (2070) 600 (4140) 900 (6200) 8.10" 5 - 3/8" 100': 127 (57.6)
Coupled weights As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. HOW TO ORDER
HOSE COUPLING COUPLING TYPE HOSE ID BY LENGTH COLOR STRIPE COLOR* SIZE THREAD TYPE MATERIAL OPTIONS
Y = Yellow 17 = 1 ³⁄ " Y = Yellow 15 = 1 ¹⁄ " ⁴ R = Red ² 20 = 2" R = Red 20 = 2" B = Blue N = NH UL = UL Labeled 25 = 2 ¹⁄²" 50 = 50' B = Blue 25 = 2 ¹⁄²" FC X O = Orange I = IPT Aluminum ULC = UL Canada 30 = 3" 100 = 100' K = Black 30 = 3” G = Green S = Storz Labeled 40 = 4" G = Green 40 = 4" T = Tan 50 = 5" Blank = No Stripe 50 = 5" C = White (coated)
Part No. Example: FC17X50YR15N = FC Conquest Hose, 1 ³⁄⁴" ID by 50' Length, Yellow with Red Stripe, 1 ¹⁄²" NH/NST Aluminum Coupling *Choose high contrast stripe color as compared to the selected hose color. Choice may not be available, please verify before ordering.
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 11 ™ ATTACK PONN SUPREME PREMIUM HOSE. OUTSTANDING VALUE. Supreme is a durable, rugged, traditional double jacket fire hose and one of the best values on the market today. Originally designed over 40 years LOW PSI ago, Supreme has become the hose to which all others are compared. With hose sizes up to 3" and manufactured to exacting standards, our use of ring-spun polyester yarn with a flexible rubber liner and calendered rubber backing, keeps this hose supple when empty and tough when necessary. CAFS FEATURES • Premium quality, double jacket, EPDM (Ethylene Propylene Diene Monomer) rubber lined fire hose made from 100% high tensile strength ring-spun USA MADE polyester yarn. The liner is attached to the inner jacket using a vulcanized calendered rubber backing that mechanically and chemically bonds the EPDM rubber lining to the inside jacket without the use of glues, and provides the assurance that the lining will not delaminate. Calendered backed hoses are more flexible and have a higher heat resistance than other hoses using a COUPLINGS Thermoplastic (TPU) adhesive. Aluminum NH/NST or IPT Threaded • Optional Dura-Cote™ treatment (see page 31 for more information). HOSE COLORS Yellow Red Blue Orange • Remains flexible to temperatures as low as -40ºF (-40ºC) and is resistant to ozone and oxidation. Green Tan White White • Optional color-coded stripe of one contrasting color can be woven into the outer jacket running the full length of the hose for identification purposes. (coated) (uncoated) • Kink resistance exceeds that of lightweight jacketed hose. STRIPE COLORS • Suitable for use with CAFS and foam solutions. Yellow Red Blue Black • Manufactured in accordance with NFPA 1961 Standard, latest edition within our ISO-9001:2015 certified quality assurance system. Green CONSTRUCTION TEMPERATURE RANGE Polyester Double Jacket EPDM Rubber -40ºF to 150ºF (-40ºC to 65ºC) Inner Liner with Rubber Backing
12 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 HOSE SIZING AND SPECIFICATIONS
WEIGHT SIZE SERVICE TEST PROOF TEST BURST (FOR 50' COUPLED) FLAT WIDTH BOWL SIZE
IN PSI (kPa) PSI (kPa) PSI (kPa) LBS (KG) IN IN
1 ¹⁄²" 400 (2760) 800 (5515) 1200 (8275) 21 (9.5) 2.80" 1 -15/16"
1 ³⁄⁴" 400 (2760) 800 (5515) 1200 (8275) 24 (10.8) 3.20" 2 - 1/8"
2" 400 (2760) 800 (5515) 1200 (8275) 28 (12.7) 3.68" 2 - 7/16"
2 ¹⁄²" 400 (2760) 800 (5515) 1200 (8275) 32 (14.5) 4.50" 3"
3" 400 (2760) 800 (5515) 1200 (8275) 43 (19.5) 5.40" 3 - 9/16"
As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. HOW TO ORDER
COUPLING TYPE HOSE ID BY HOSE LENGTH COLOR STRIPE COLOR* COUPLING SIZE THREAD TYPE MATERIAL
Y = Yellow R = Red Y = Yellow 15 = 1 ¹⁄ " ² B = Blue R = Red 15 = 1 ¹⁄ " 17 = 1 ³⁄ " ² ⁴ 50 = 50' O = Orange B = Blue 20 = 2" N = NH FS 20 = 2" X Aluminum 100 = 100' G = Green K = Black 25 = 2 ¹⁄ " I = IPT 25 = 2 ¹⁄ " ² ² T = Tan G = Green 30 = 3" 30 = 3" C = White (coated) Blank = No Stripe W = White (uncoated)
Part No. Example: FS17X50YR15N = FS Supreme Hose, 1 ³⁄⁴" ID by 50' Length, Yellow with Red Stripe, 1 ¹⁄²" NH/NST Aluminum Coupling *Choose high contrast stripe color as compared to the selected hose color. Choice may not be available, please verify before ordering.
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 13 ™ ATTACK PONN GLADIATOR PREMIUM HOSE. EXCELLENT FLOW, EVEN AT LOW PRESSURE. Another great addition to the Ponn family, the Gladiator is a premier hose which has a polyester outside jacket that encompasses a very LOW PSI durable nitrile-thru-the-weave inside liner. Built to last, the rugged hose is constructed with incredible strength and long-lasting performance in mind. The Gladiator performs well at high or low pressures, has a smooth and CAFS enhanced waterway for better flows and less kinking than other products Nitrile Rubber on the market. FEATURES USA MADE • Premium quality, outside jacket with a nitrile thru-the-weave inner tube construction. • Optional Dura-Cote™ treatment (see page 31 for more information). • Remains flexible to temperatures as low as -20ºF (-29ºC) and is resistant to ozone and oxidation. COUPLINGS • Kink resistance exceeds that of lightweight jacketed hose. Aluminum NH/NST or IPT Threaded • Suitable for use with CAFS and foam solutions. HOSE COLORS • Manufactured in accordance with NFPA 1961 Standard, latest edition within our Yellow Red Blue Orange ISO-9001:2015 certified quality assurance system.
CONSTRUCTION TEMPERATURE RANGE Green Tan White Polyester Outside Jacket -20ºF to 200ºF (-29ºC to 95ºC) (coated) Extruded Nitrile Inner Liner (Thru-the-Weave)
14 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 HOSE SIZING AND SPECIFICATIONS
WEIGHT SIZE SERVICE TEST PROOF TEST BURST (FOR 50' COUPLED) FLAT WIDTH BOWL SIZE
IN PSI (kPa) PSI (kPa) PSI (kPa) LBS (KG) IN IN
1 ³⁄⁴" 500 (3447) 1000 (6895) 1500 (10342) 23 (10.4) 3.38" 2 - 3/16”
2" 500 (3447) 1000 (6895) 1500 (10342) 26 (11.8) 3.50" 2 - 5/16”
2 ¹⁄²" 500 (3447) 1000 (6895) 1500 (10342) 35 (15.9) 4.30" 2 - 7/8"
As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. HOW TO ORDER
TYPE HOSE ID BY HOSE LENGTH COLOR COUPLING SIZE THREAD TYPE COUPLING MATERIAL
Y = Yellow R = Red B = Blue 15 = 1 ¹⁄ " 17 = 1 ³⁄ " ² ⁴ 50 = 50' O = Orange 20 = 2 " N = NH FG 20= 2 " X Aluminum 100 = 100' G = Green 25 = 2 ¹⁄ " I = IPT 25 = 2 ¹⁄ " ² ² T = Tan C = White (coated)
Part No. Example: FG17X50Y15N = FG Gladiator Hose, 1 ³⁄⁴" ID by 50' Length, Yellow, 1 ¹⁄²" NH/NST Aluminum Coupling
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 15 PONN GLADIATOR NF® JACKETED THRU-THE-WEAVE NITRILE RUBBER ATTACK Ponn Gladiator NF is our family of exact-ID attack hoses built for low- pressure, high-flow firefighting environments. Built upon the success of our industry leading Gladiator attack hose product, you can count on the Gladiator NF family to deliver the highest water flows, industry-leading kink CAFS resistance, and exceptional durability.
Built to last, this rugged hose is constructed with an extruded thru- LOW PSI the-weave nitrile rubber liner with a durable outer polyester jacket providing incredible strength and long-lasting performance. Gladiator NF products are 100% manufactured, assembled, & tested in Erie County, Pennsylvania, USA – ask our competition where their components are USA MADE made!
FEATURES: CONSTRUCTION Nitrile Thru-the-Weave Extrusion with Polyester Outer jacket • Highly resistant to both • Standard Dura-Cote conductive and radiant heat. protective treatment available TEMPERATURE RANGE • The Service Test Pressure in NFPA colors. -20ºF to 180ºF (-29ºC to 82ºC) is 500 PSI, making it a very • Manufactured in accordance durable and reliable hose. COLORS with NFPA 1961 Standard, Yellow Red Blue Orange • Performance rated at -20°F latest edition within our ISO- to 180°F (-29°C to 82°C). 9001:2015 certified quality Green Tan White assurance system. (coated)
HOSE SIZING AND SPECIFICATIONS
COUPLING BOWL WEIGHT PER 50' PART NUMBER SIZE SERVICE TEST PROOF TEST BURST SIZE ID COUPLED
IN PSI PSI PSI IN INCH LBS
FGN17X50_15N 1 ¾" 500 1,000 1,500 2 - 1/8" 1.75 23
FGN25X50_25N 2 ¹⁄²" 500 1,000 1,500 2 - 7/8" 2.50 35
16 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 NATIONAL N-DURA® NYLON DOUBLE JACKET ATTACK HOSE N-Dura® has an outstanding record of durability and value: 30 years of fireground ATTACK experience and millions of feet sold prove that it is one of America’s favorites. FEATURES: • Premium quality, double jacket, EPDM (Ethylene Propylene Diene Monomer) rubber lined fire hose made from 100% high strength nylon 6.6 yarn. The liner CAFS is attached to the inner jacket using a vulcanized calendered rubber backing that mechanically and chemically bonds the EPDM rubber lining to the inside CONSTRUCTION Nylon Double Jacket jacket without the use of glues, and provides the assurance that the lining will EPDM Rubber Inner Liner with Rubber USA MADE not delaminate. Backing • Outer jacket is manufactured with a tight weave with a high “pick” count to virtually eliminate snagging and pulling while on the fireground. TEMPERATURE RANGE • Reverse twill weave of the inner jacket provides a smooth waterway, delivering -40ºF to 150ºF (-40ºC to 65ºC) the lowest friction loss in its class. COUPLINGS • Standard Dura-Cote™ protective treatment (see page 31 for more Aluminum NH/NST or IPT Threaded information). COLORS • Highly resistant to ozone and oxidation. Yellow Red Blue Orange • Manufactured in accordance with NFPA 1961 Standard, latest edition within our ISO-9001:2015 certified quality assurance system. Green Tan White (coated) HOSE SIZING AND SPECIFICATIONS
WEIGHT SIZE SERVICE TEST PROOF TEST BURST (FOR 50' COUPLED) FLAT WIDTH BOWL SIZE
IN PSI (kPa) PSI (kPa) PSI (kPa) LBS (KG) IN IN
1 ¹⁄²" 400 (2760) 800 (5515) 1200 (8275) 20 (9.1) 2.80" 1 ¹⁵⁄¹⁶" 1 ³⁄⁴" 400 (2760) 800 (5515) 1200 (8275) 26 (11.8) 3.20" 2 1/8" 2" 400 (2760) 800 (5515) 1200 (8275) 28 (12.7) 3.70" 2 ¹⁄²" 2 ¹⁄²" 400 (2760) 800 (5515) 1200 (8275) 30 (13.6) 4.50" 3" 3" 400 (2760) 800 (5515) 1200 (8275) 38 (17.2) 5.30" 3 ⁹⁄¹⁶" As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. HOW TO ORDER
TYPE HOSE ID BY HOSE LENGTH COLOR COUPLING SIZE THREAD TYPE COUPLING MATERIAL
Y = Yellow 15 = 1 ¹⁄ " R = Red ² 15 = 1 ¹⁄ " 17 = 1 ³⁄ " B = Blue ² ⁴ 50 = 50' 20 = 2" N = NH NP 20 = 2" X O = Orange Aluminum 100 = 100' 25 = 2 ¹⁄ " I = IPT 25 = 2 ¹⁄ " G = Green ² ² 30 = 3" 30 = 3" T = Tan C = White (coated)
Part No. Example: NP17X50R15N = NP N-Dura Hose, 1 ³⁄⁴" ID by 50' Length, Red, 1 ¹⁄²" NH/NST Aluminum Coupling 814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 17 NATIONAL TRIPLE DUTY ATTACK, SUPPLY, RELAY – ALL-IN-ONE HOSE Not sure you want rubber LDH (Large Diameter Hose)? National Fire Hose Triple Duty gives you a double jacket alternative. The extruded thru-the- ATTACK weave polyurethane liner is lighter than rubber, and the nylon 6.6 outer jacket, treated with our exclusive Dura-Cote™ abrasion resistant treatment, provides the durability you need. The result is a tough, double jacket woven hose weighing a lot less than other LDH hose and packs tighter, requiring less hose bed space. SUPPLY FEATURES: • Large diameter, double jacket municipal fire hose with both jackets made from CONSTRUCTION 100% high-strength, low stretch, filament nylon along with an extruded thru- Nylon Double Jacket the-weave inner hose liner of thermoplastic polyurethane. NO ADHESIVE IS Extruded Polyurethane Inner Liner (Thru- POTABLE USED and the lining will never delaminate. WATER the-Weave) • Reverse twill weave of the inner jacket provides a smoother waterway and superior liner system. TEMPERATURE RANGE • Standard Dura-Cote™ treatment applied (see page 31 for more information). -40ºF to 150ºF (-40ºC to 65ºC) • Hose remains flexible to temperatures as low as -40ºF (-40ºC) and is highly COUPLINGS USA MADE resistant to ozone and oxidation. Aluminum NH/NST or IPT Threaded & • Specifically engineered for attack, supply and relay operations – a truly Aluminum Storz universal fire hose. COLORS • The polyurethane lining material meets NSF/ANSI Standard 61 for drinking Yellow Red Blue Orange water. • Manufactured in accordance with NFPA 1961 Standard, latest edition within Green Tan White our ISO-9001:2015 certified quality assurance system. (coated) HOSE SIZING AND SPECIFICATIONS
SIZE SERVICE TEST PROOF TEST BURST WEIGHT FLAT WIDTH BOWL SIZE (FOR 50' & 100' COUPLED)
IN PSI (kPa) PSI (kPa) PSI (kPa) LBS (KG) IN IN 50': 57 (25.8) 4" 300 (2070) 600 (4140) 900 (6200) 7.2" 4 -17/32" 100': 106 (48.1)
50': 67 (30.4) 5" 300 (2070) 600 (4140) 900 (6200) 8.3" 5 - 15/32" 100': 123 (55.8)
Coupled weights As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. HOW TO ORDER COUPLING TYPE HOSE ID BY HOSE LENGTH COLOR COUPLING SIZE THREAD TYPE MATERIAL
Y = Yellow R = Red B = Blue 40 = 4" N = NH 40 = 4" 50 = 50' TD X O = Orange 45 = 4 ¹⁄ " I = IPT Aluminum 50 = 5" 100 = 100' ² G = Green 50 = 5" S = Storz T = Tan C = White (coated)
Part No. Example: TD40X50Y40S = TD Triple Duty Hose, 4" ID by 50' Length, Yellow, 4" Storz Aluminum Coupling
18 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 NATIONAL DURA-PAK NYLON DOUBLE JACKET ATTACK HOSE ATTACK When introduced, Dura-Pak started an industry-wide trend toward lightweight high-rise hose. Originally designed for back-pack use, Dura-Pak folds tightly for small spaces, hose beds and high-rise packs. Because it is so durable, many departments have selected Dura-Pak for frontline attack duties.
HIGH-RISE FEATURES: • Both jackets made from 100% high strength, low stretch, air-entangled nylon 6.6 along with a lining of thermoplastic polyurethane for reduced weight while remaining kink resistant. • Reverse twill weave of the inner jacket provides a smoother waterway and CAFS superior liner system, surpassed only by Ponn Conquest™. • Standard Dura-Cote™ protective treatment (see page 31 for more information). • Suitable for CAFS and foam concentrate applications. POTABLE • Highly resistant to ozone and oxidation. WATER • Can be used for potable water in an emergency. The polyurethane lining COUPLINGS material meets NSF/ANSI Standard 61 for drinking water. Aluminum NH/NST or IPT Threaded • Manufactured in accordance with NFPA 1961 Standard, latest edition within our ISO-9001:2015 certified quality assurance system. COLORS USA MADE Yellow Red Blue Orange CONSTRUCTION TEMPERATURE RANGE Nylon Double Jacket -40ºF to 150ºF (-40ºC to 65ºC) Green Tan White Polyurethane Inner Liner (coated) HOSE SIZING AND SPECIFICATIONS
SIZE SERVICE TEST PROOF TEST BURST WEIGHT FLAT WIDTH BOWL SIZE (FOR 50' COUPLED)
IN PSI (kPa) PSI (kPa) PSI (kPa) LBS (KG) IN IN
1 ¹⁄²" 400 (2760) 800 (5515) 1200 (8275) 15 (6.8) 3.0" 1 - 15/16" 1 ³⁄⁴" 400 (2760) 800 (5515) 1200 (8275) 17 (7.7) 3.5" 2 - 1/8" 2" 400 (2760) 800 (5515) 1200 (8275) 21 (9.5) 3.7" 2 - 1/2"
2 ¹⁄²" 400 (2760) 800 (5515) 1200 (8275) 26 (11.8) 4.45" 2 - 15/16" 3" 400 (2760) 800 (5515) 1200 (8275) 32 (14.5) 5.3" 3 - 9/16" As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. HOW TO ORDER
TYPE HOSE ID BY HOSE LENGTH COLOR COUPLING SIZE THREAD TYPE COUPLING MATERIAL
Y = Yellow 15 = 1 ¹⁄ " R = Red ² 15 = 1 ¹⁄ " 17 = 1 ³⁄ " B = Blue ² ⁴ 50 = 50' 20 = 2" N = NH DP 20 = 2" X O = Orange Aluminum 100 = 100' 25 = 2 ¹⁄ " I = IPT 25 = 2 ¹⁄ " G = Green ² ² 30 = 3" 30 = 3" T = Tan C = White (coated)
Part No. Example: DP17X50O15N = DP Dura-Pak Hose, 1 ³⁄⁴" ID by 50' Length, Orange, 1 ¹⁄²" NH/NST Aluminum Coupling
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 19 COMBAT MASTER FLOW DOUBLE JACKET ONE-PIECE NITRILE RUBBER LINER The Combat Master Flow is one of the most solid hose products we offer. Combat ATTACK Master Flow is lightweight but still packs a punch. Plus, the hose doesn't use adhesive so there is no delamination of liner. This hose has great anti-kink performance with low pressure nozzles. This hose CAFS flows at low pressures so it's perfect for many different uses, including high rise packs, master stream applications, municipal attack for big water, relay pumping, crash/fire, and CAFS applications. CONSTRUCTION The Combat Master Flow is your premium choice for superb heat resistance, Outer Jackets: 100% High Tenacity an enlarged 1.88” waterway that delivers the highest flows possible, less drag HIGH-RISE Synthetic Poolyester Yarn Single Jacket resistance over tough terrain, and superb abrasion resistance. Lining: Specifically developed nitrile Our Combat Master Flow hose meets and exceeds NFPA Standard 1961, current rubber extruded thru-the-weave one piece edition. liner. HOSE SIZING AND SPECIFICATIONS TEMPERATURE RANGE LOW PSI -40ºF to 150ºF (-40ºC to 65ºC) SIZE BOWL SIZE PROOF PSI SERVICE PSI BURST PSI WEIGHT (FOR 50' UNCOUPLED) COUPLINGS IN PSI PSI PSI LBS Aluminum NH/NST, IPT Threaded USA MADE 1 ¾" 2 - 1/16" 800 400 1200 18 Note: Double expansion rings used when coupling 1 3/4". 2 ½" 3" 800 400 1200 28
As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used. AVAILABLE IN: 50', 100'
COLORS
White Yellow Red Orange (Treated/Untreated) Black
Forest Blue Green Tan
20 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 VICTORY SUPREME HEAVY DUTY DOUBLE JACKET EPDM RUBBER LINED OVERSIZED WATERWAY
The Firequip Victory Supreme is large and in charge. If you need a hose rated all around supreme in all areas of performance, look no further than this hose.
ATTACK This hose has extremely high kink resistance with low pressure nozzles. The 1.75" hose has an enhanced 1.88" waterway for some serious water flow. The Victory Supreme stands in a class of its own and really takes it back to the basics of fire hose. CAFS The Victory Supreme can be used for municipal supply or attack line, relay CONSTRUCTION pumping/rural water supply, industrial firefighting, master stream appliances, Inner and Outer Jacket: 100% High crash/fire rescue, and CAFS applications. Tenacity Spun Polyester The Victory Supreme meets and exceeds NFPA Standard 1961, current edition. Lining: Extruded Synthetic EPDM Rubber LOW PSI HOSE SIZING AND SPECIFICATIONS with .60" Thick Tube WEIGHT TEMPERATURE RANGE SIZE BOWL SIZE PROOF PSI SERVICE PSI BURST PSI (50' UNCOUPLED) -40ºF to 150ºF (-40ºC to 65ºC) USA MADE IN IN PSI PSI PSI LB COUPLINGS 1 ½" 1 - 15/16" 800 400 1200 19 Aluminum NH/NST, IPT Threaded 1 ¾" 2 - 3/16" 800 400 1200 21 Note: Double expansion rings used when 2 ½" 3" 800 400 1200 35 coupling 1 3/4" 3" 3 - 1/16" 800 400 1200 39 AVAILABLE IN: 50', 100' As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used.
COLORS
White Yellow Red Orange (Treated/Untreated) Black
Forest Blue Green Tan
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 21 DJ800 DOUBLE JACKET EPDM RUBBER LINED FIRE HOSE The DJ800 double jacket EPDM rubber lined fire hose is a lightweight fire hose that ATTACK is ready to do it all. This hose can be used as a municipal attack and supply line, a relay pumping/rural water supply, can be used for industrial fire fighting environments, master stream appliances, and crash/fire rescues.
SUPPLY The tightly woven fabric allows for flat folding while also being resistant to abrasion and kinks.
The DJ800 meets and exceeds NFPA Standard 1961, current edition.
CAFS HOSE SIZING AND SPECIFICATIONS WEIGHT SIZE BOWL SIZE PROOF PSI SERVICE PSI BURST PSI (50' UNCOUPLED) CONSTRUCTION IN IN PSI PSI PSI LB Outer Jacket: Polyester Double Jacket 1" 1 - 3/8" 800 400 1200 9.5 Lining: Extruded Synthetic EPDM Rubber 1 ½" 1 - 15/16" 800 400 1200 17 TEMPERATURE RANGE 1 ¾" 2 - 1/8" 800 400 1200 18 -40ºF to 150ºF (-40ºC to 65ºC) 2" 2 - 7/16" 800 400 1200 25 COUPLINGS 2 ½" 3" 800 400 1200 28 Aluminum NH/NST, IPT Threaded 3" 3 - 1/16" 800 400 1200 38 As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest *Not recommended for low pressure operating pressure” at which the hose is expected to be used. nozzle.
COLORS AVAILABLE IN: 50', 100' White Yellow Red Orange (Treated/Untreated) Black
Forest Blue Green Tan
22 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 ATTACK LITE POLY DOUBLE JACKET POLYESTER ULTRA LIGHTWEIGHT TPU LINED HOSE The Attack Lite Poly is the number one preference for high rise packs for municipalities both small and large. This hose is lightweight and space saving - it ATTACK requires less space than a standard double jacket or rubber hose.The tightly woven fabric and optimized liner thickness ensures this hose folds flat and tight in a hose bed.
This hose can be used for industrial and municipal fire fighting, master stream SUPPLY appliances, municipal potable water transfer, fire/crash rescue, all cold weather applications, and relay pumping for rural water supply.
This lightweight hose is trusted by municipalities everywhere because it's CAFS lightweight which allows for easier handling and less fire fighter fatigue. The Attack Lite Poly meets and exceeds NFPA Standard 1961, current edition. CONSTRUCTION HOSE SIZING AND SPECIFICATIONS Outer Jacket: 100% High Tenacity Spun SIZE BOWL SIZE PROOF PSI SERVICE PSI BURST PSI WEIGHT Polyester POTABLE (50' UNCOUPLED) WATER Lining: Thermo-Polyurethane (TPU) Liner IN IN PSI PSI PSI LB Bond with Inner Woven Jacket 1 ½" 1 - 15/16" 800 400 1200 14 TEMPERATURE RANGE 1 ¾" 2 - 1/8" 800 400 1200 17 5 -40ºF to 150ºF (-40ºC to 65ºC) YEAR 2" 2 - 5/16" 800 400 1200 19 WARRANTY COUPLINGS 2 ½" 3" 800 400 1200 22 Aluminum NH/NST, IPT Threaded 3" 3 - 1/2" 800 400 1200 30 *Not recommended for low pressure As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest nozzle. operating pressure” at which the hose is expected to be used. COLORS White AVAILABLE IN: 50', 100' Yellow Red Orange (Treated/Untreated) Black
Forest Blue Green Tan
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 23 DJ600 LDH DOUBLE JACKET EPDM RUBBER LINED LARGE DIAMETER HOSE DJ600 is the double jacket EPDM rubber lined large diameter hose that is excellent for both attack or supply lines. SUPPLY
This large diameter hose is lightweight and folds compactly for space saving. Since it's lightweight by design, it's easier to handle therefore reducing firefighter fatigue. With this hose you can flow high volumes of water quickly CONSTRUCTION Inner and Outer Jackets: 100% Virgin SOFT while avoiding the fatigue that comes with heavier hoses. SUCTION Spun Polyester Lining: Extruded Synthetic EPDM Rubber The Firequip DJ600 LDH hose is a tough and able fighter - this hose moves water quicker, has high abrasion resistance when treated with WearGuard TEMPERATURE RANGE as well as low friction loss. If you are looking for an LDH to flow water, look -40ºF to 150ºF (-40ºC to 65ºC) no further than the DJ600 LDH. COUPLINGS Extruded Aluminum Storz Threaded Some uses include: Couplings • Municipal attack line hose. • Relay pumping. AVAILABLE IN: 25', 50', 100' • Crash/fire rescue. COLORS • Master stream applications. • Industrial firefighting. Yellow Red • Soft suction in shorter lengths.
HOSE SIZING AND SPECIFICATIONS White Orange (Treated/Untreated) SIZE BOWL SIZE PROOF PSI SERVICE PSI BURST PSI WEIGHT (FOR 50' UNCOUPLED)
IN PSI PSI PSI LBS
4" 4 - 3/8" 600 300 900 42
5" 5 - 3/8" 600 300 900 62
As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used.
24 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 WILDLAND ULTRA FORESTRY SINGLE JACKET THERMO-POLYURETHANE LINED Wildland Ultra Forestry Hose is designed to be carried by back pack or by hand for long distances over steep or rough terrian and forest conditions. This hose is a premium quality and long-lasting hose FORESTRY designed for use in brush, grass, and forestry fires. It was also designed for use with portable pumps, heavy duty pumps and tank trucks. Color impregnation provides greater abrasion resistance, heat resistance, and reduced water absorption. ATTACK FEATURES: • Specification 187, meets USDA FSS 5100-187 Type II • Applications: • Outer Jacket: 100% Polyester Yarn with Filament Polyester • Brush, grass, and forestry fire 1 Filler Yarn YEAR • Designed for use with portable pumps, heavy duty WARRANTY • Lining: Extruded thermo-polyurethane, compounded to pumps. and tank trucks resist ozone. • Wildland Applications • Protective Treated Coating: WearGuard • Untreated White Available - 187 Type I • The Wildland Ultra Forestry is available in 3/4" and 5/8" • Available in 50, 100' with garden hose threads.
HOSE SIZING AND SPECIFICATIONS
SERVICE TEST PROOF TEST BURST TEST WEIGHT SIZE PRESSURE PRESSURE PRESSURE 50' UNCOUPLED COIL DIAMETER
IN PSI PSI PSI LBS PSI
5/8" 200 400 600 1.7 lbs 9.5 in (50')
3/4" 200 400 600 2 lbs 10 in (50')
1" 300 600 900 4 lbs 16.5 in (100')
1 ¹⁄²" 300 600 900 7 lbs 16.5 (100')
COLORS Yellow
White (Treated/Untreated)
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 25 FIRE ENGINE BOOSTER HOSE MULTIPLE TEXTILE SPIRAL REINFORCED EPDM RED REEL BOOSTER HOSE Designed for high-performance reliability from structure fires to forest blazes, the multiple braid FORESTRY reinforced red reel hose features a specially compounded Ethylene Propylene Diene Monomer (EPDM) tough cover that resists abrasion and weathering. Inside, a smooth black synthetic EPDM rubber inner tube adds flexibility and sure, high-power flow. Available with Barway or external crimped steel couplings.
ATTACK FEATURES: • EPDM rubber fire hose is reinforced with multiple textile spiral, • Fully loaded, ready on reel, multi-purpose frontline attack and smooth inner lining for exceptional strength, durability hose, handles structure and vehicle firefighting; grass, and flow. wildland and forestry fires; and industrial applications. • EPDM rubber compound provides a durable, flexible cover • Assembled in accordance with NFPA 1961 Standard, latest BOOSTER that resists abrasion, gouging, ultra-violet and ozone edition within our ISO-9001:2015 certified quality assurance damage, as well as most chemicals. system. • A smooth outer cover lowers drag resistance for sure serviceability. USA MADE HOSE SIZING AND SPECIFICATIONS
SIZE WORKING BURST WEIGHT WEIGHT BOWL SIZE 5 PRESSURE (FOR 50' COUPLED) (FOR 100' COUPLED) YEAR IN PSI (kPa) PSI (kPa) LBS (KG) LBS (KG) IN WARRANTY ³⁄⁴" 800 (5155) 3200 (22060) 21 (9.5) 42 (19) 1 - 1/4"
1" 800 (5155) 3200 (22060) 30 (13.6) 60 (27.2) 1 - 1/2"
1 ¹⁄²" 200 (1380) 600 (4140) 50 (22.7) 100 (45.4) 2"
Note: ¾” & 1” Booster exceeds NFPA 1961 with a 4:1 Safety Factor.
Minimum Bend Radius ³⁄⁴" = 7" and 1" = 8". COLORS Red
26 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 REEL LITE BOOSTER HOSE LIGHTWEIGHT WOVEN TPU FORESTRY REEL HOSE Swift-moving forest fires require quick action — and Reel Lite delivers. It is light in weight and strong in stature, for first arrival frontline attack duties. Fully loaded, ready on the reel, this forestry hose is FORESTRY purpose-built for wildland use: Reinforced with a 100% high tenacity polyester cover for exceptional durability and low drag; and a smooth TPU liner — it goes wherever you need it, with complete confidence. Available in 50′ or 100′ lengths, Reel Lite is available with expansion ring or field repairable couplings.
BOOSTER FEATURES: • Polyester single jacket hose with ultra-durable outer cover, • Fully loaded, ready on reel. circular woven with helical inner reinforcement. • Recommended reel size 12″ minimum. 1 • Built tough for rugged dependability, but at a light weight for • Assembled in accordance with NFPA 1961 Standard, latest YEAR exceptional portability. edition within our ISO-9001:2015 certified quality assurance WARRANTY • Jacket design delivers low drag for exceptional service for system. grass and brush, wildland, and dumpster fires. • One year warranty. • Polyurethane liner is lightweight and flexible. HOSE SIZING AND SPECIFICATIONS
WEIGHT SIZE SERVICE TEST PROOF TEST BURST (FOR 50' COUPLED) BOWL SIZE
IN PSI PSI PSI LBS IN
SINGLE JACKET
1" 300 600 900 7 1 - 3/16"
1½" 800 1600 2400 8 1 - 7/16"
DOUBLE JACKET
1" 800 1600 2400 8 1 - 7/16"
1 ½" 800 1600 2400 10 1 - 15/16" As per NFPA 1961 – The service test pressure is to be 10% greater than the “normal highest operating pressure” at which the hose is expected to be used.
COLORS Yellow Red
Reattachable Couplings available 814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 27 MAXI-FLEX PVC LIGHT, FLEXIBLE PVC HARD SUCTION HOSE FOR DRAFTING Maxi-Flex is the industry’s original lightweight PVC suction-only hose. Built smarter, its special corrugated PVC exterior provides maximum flexibility and smooth waterway for superior flow. Its design is unique: Clear flexible PVC between the helix ribs allows full view of water, while distinctive black helix ribs deliver maximum UV protection. Lightweight and ultra-flexible, Maxi-Flex Hose affords one person hookup operation with extruded aluminum re-attachable, bolt-on couplings. Designed for suction only, it handles full-vacuum applications, drafting from any rural or municipal non-pressurized water source. FEATURES: • Corrugated PVC exterior provides durability, but with lightweight • Designed for suction only. Suitable for hard suction applications, HARD portability. drafting from rural water sources. SUCTION • Easy to transport and more flexible than traditional hard suction hoses • Available 1.5″, 2", 2.5″ and 3″ expansion ring couplings. 4″, 4.5″, for fast, one person hookup. 5″, and 6″ coupled with re-attachable bolt-on couplings. • Clear flexible PVC in between helix shows water view; black helix ribs • Assembled in accordance with NFPA 1961 Standard, latest edition provide UV protection. Limit exposure to direct sunlight for extended within our ISO-9001:2015 certified quality assurance system. periods of time. USA MADE • One piece extruded aluminum field repairable, re-attachable collars; no plastic parts — and folding handles available. HOSE SIZING AND SPECIFICATIONS 5 SIZE WORKING WORKING WEIGHT YEAR PRESSURE 68°F PRESSURE 104°F (FOR 10' UNCOUPLED) WARRANTY IN PSI (kPa) PSI (kPa) LBS (KG)
1 ¹⁄²" 70 45 5 2" 65 40 7
3" 45 25 12
4" 35 18 20
4 ¹⁄²" 35 18 23 5" 35 18 25
6" 30 15 38 TANK-FLEX CONVENTIONAL HARD RUBBER WIRE REINFORCED SUCTION HOSE For rural fire departments that require pick-up-and-go portability, Tank-Flex is the everyday essential. A durable hard suction hose, it features a tough synthetic Ethylene Propylene Diene Monomer (EPDM) HARD SUCTION rubber cover that resists wear on the fireground while standing up to ozone damages. A special wire helix and nylon fabric reinforced liner boosts hose durability, so it can withstand pressure if required. Tank-Flex is more flexible than most standard hard suction hoses, allowing for better all-around handling with quick and easy hookup. It is engineered for drafting from any rural water source. USA MADE FEATURES: • Wire reinforced liner and smooth ozone-resistant cover. Can • Designed for full vacuum. Suitable for hard suction 5 withstand pressure, if required. applications, drafting from rural water sources.. YEAR • Easy to transport and more flexible than traditional hard • Assembled in accordance with NFPA 1961 Standard, latest WARRANTY suction hoses for fast hookup. edition within our ISO-9001 certified quality assurance system • Constructed with soft cuff ends for greater coupling retention. HOSE SIZING AND SPECIFICATIONS
SIZE WORKING BURST WEIGHT BOWL SIZE PRESSURE (FOR 10' UNCOUPLED)
IN PSI (kPa) PSI (kPa) LBS (KG) IN
2 ¹⁄²" 150 (1035) 450 (3100) 16 (7.3) 3"
3" 150 (1035) 450 (3100) 20 (9.1) 3 - 9/26"
4" 150 (1035) 450 (3100) 28 (12.7) 4 - 5/8"
4 ¹⁄²" 165 (1135) 495 (3410) 39 (17.7) 5 - 3/8"
5" 165 (1135) 495 (3410) 43 (19.5) 5 - 7/8"
6" 165 (1135) 495 (3410) 58 (26.3) 6 - 7/8"
28 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 RACK AND REEL 1 SINGLE JACKET THERMO-POLYURETHANE LINED YEAR WARRANTY The Firequip Rack and Reel hose has multiple uses across multiple industries. This hose can be used in hotels, schools, can be used for indoor fire protection, as a standpipe hose, an occupant use hose, and more. It is an all synthetic standpipe hose that replaces linen hose. Firequip's Rack and Reel hose is manufactured to be extremely light, flexibile and compact. FEATURES: • Outer Jacket: Single Jacket High Tenacity Polyester • One year warranty. Filament Yarn • Applications: • Lining: Thermo-Polyurethane (TPU) bonded to fabric • Occupant use hose jacket • Standpipe Hose • Folded to fit pin racks • Indoor Fire Protection Number of pins: • Hotels, schools, commercial, 50' - 10 pins industrial use • 75' - 18 pins • Available in: 50', 75', 100' • 100' - 25 pins
HOSE SIZING AND SPECIFICATIONS
SIZE BOWL SIZE PROOF PSI SERVICE PSI BURST PSI WEIGHT (50' UNCOUPLED)
IN IN PSI PSI PSI LBS
1 ½" 1 11/16" 500 250 750 5
2 ½" 2 3/4" 500 250 750 11
White COLORS (Untreated)
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 29 EXPANDING OUR HOSE PRODUCTS IN ORDER TO SERVICE OUR CUSTOMERS BETTER A MESSAGE FROM OUR CEO
All-American Hose is entering a new phase in its development by going back to its roots as Snap-tite Hose. The company logo and name changes make it easier to show customers our entire product portfolio and how we truly have a solution for your hose flow issue. We’ve also welcomed a new brand to our family and are excited at the possibility of helping even more customers around the globe.
By combining forces with Firequip, we are able to offer a broader range of high quality, durable lay-flat hoses to more customers. We want to make sure that our customers understand what each brand stands for and why a mix of brands enables us to provide the most complete, tailored hose system solution for nearly any set of customer needs.
We recognize that all customers are not alike – urban departments have different needs than rural stations; private industrial fire suppression poses different challenges than typical residential structures. High-rise structures require different equipment than single-story structures. One hose does not and should not fit every department’s standard operating procedures for pressure and flow. The expansion of hose products offered gives us more choices to offer to customers to more closely meet their needs.
The iconic brands of Ponn, National and Snap-tite have always and will always be made in the USA from the highest quality materials in ISO-2015 certified facilities. Every hose is tested and certified to meet or exceed NFPA standards. We maintain a database of every test to ensure complete traceability from the factory to dealer to end-user through the entire life cycle of the hose. This is what you should expect from the industry leader.
The Firequip brands provides access to high quality hoses that are globally sourced for durability and value. When departments rely on a hose that can offer price, quality and durability the Firequip by Snap-tite brand is there to provide solutions to their hose flow needs. We stand behind every hose that is assembled in our plant in North Carolina and test each hose to ensure that it meets or exceeds NFPA standards. The Firequip history of high quality and exceptional customer service adds to our overall ability to service customers better and we are excited to welcome them to the family.
We stand for honesty and integrity in dealing with customers, employees, suppliers and other stakeholders. That’s why we have invested in test equipment and demo trucks to demonstrate scientifically in the lab and professionally in the field why our products are the best in the business. We know you don’t want to hear excuses if something goes wrong, and we won’t hide behind some technicality in our search for the root cause of whatever happened. We take corrective action when necessary to ensure that our ISO 2015 processes and procedures will deliver quality and value each and every time we ship a hose - after all, our first responders depend on their tools to keep them safe and we take our part in that promise very seriously.
I invite you to take a closer look at the new (old) Snap-tite Hose through our catalogues, our web site and our sales and customer service representatives. Our sales team is ready to help you find the solution to your hose flow issue. If it's price, performance, durability, innovation, or legacy - we've got you covered.
30 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 HOSE RECORD VAULT ™ The Hose Record Vault system was developed with the hope that all fire departments would fully implement fire hose preventative maintenance procedures, with full documentation as required by NFPA 1962. As a firefighter you know what it takes to battle fires and our desire is that you have the confidence and knowledge that your fire hose is up to the job.
• Find location and status of a specific • Hose service testing email reminders length of hose • Barcode capability interface for unique • Hose records stored in one place, with hose identifier database backup • Hose inventory management to assist in • Easy web interface from any computer meeting ISO asset tracking
UNLOCK THE ANSWERS WITH SNAP-TITE HOSE RECORD VAULT! WWW.HOSERECORDVAULT.COM EXPANDING OUR HOSE PRODUCTS IN ORDER TO SERVICE OUR CUSTOMERS BETTER
A MESSAGE FROM OUR CEO Snap-tite Hose's Exclusive Dura-Cote™ hose treatment creates a virtually impenetrable shield that increases hose performance and durability, while extending service life. Dura-Cote™ is an Advanced Acrylic Urethane Hybrid material that contains aramid fiber ( Kevlar ) All-American Hose is entering a new phase in its development by going back to its roots as Snap-tite Hose. The company material that is force applied—not sprayed—and cross-linked via a high temperature curing process. logo and name changes make it easier to show customers our entire product portfolio and how we truly have a solution for your hose flow issue. We’ve also welcomed a new brand to our family and are excited at the possibility of helping even more Protective Dura-Cote™ provides superior abrasion, heat and chemical resistance, far surpassing the minimal standards of MIL-H- customers around the globe. 24606B. Compared to competitive coatings made of nitrile/latex or acrylic, Advanced Acrylic Urethane Hybrid has remarkably better flexibility and ultra-low temperature maneuverability. By combining forces with Firequip, we are able to offer a broader range of high quality, durable lay-flat hoses to more customers. We want to make sure that our customers understand what each brand stands for and why a mix of brands • Abrasion resistance increased 10 times over uncoated hose • Excellent water pick-up resistance enables us to provide the most complete, tailored hose system solution for nearly any set of customer needs. • Flame resistance increased five times • Immune to fungal damage • Resistant to solvents, oils and other hydrocarbons • UV and ozone resistant We recognize that all customers are not alike – urban departments have different needs than rural stations; private industrial fire suppression poses different challenges than typical residential structures. High-rise structures require different equipment than single-story structures. One hose does not and should not fit every department’s standard operating procedures for pressure and flow. The expansion of hose products offered gives us more choices to offer to ATTACK HANDLINES LDH SUPPLY LINES customers to more closely meet their needs. WOVEN POLYESTER DOUBLE JACKET WOVEN POLYESTER DOUBLE JACKET RUBBER NITRILE THRU-THE-WEAVE LOW FRICTION LOSS - HIGH FLOW RUBBER LINED WOVEN POLYESTER DOUBLE SNAP-TITE - HFX The iconic brands of Ponn, National and Snap-tite have always and will always be made in the USA from the highest quality SNAP-TITE - PONN CONQUEST FIREQUIP - DJ800 JACKET *NON-DELAMINATING” Bulldog - Hi Vol materials in ISO-2015 certified facilities. Every hose is tested and certified to meet or exceed NFPA standards. We maintain (FC) Bulldog - Ultima THERMOPLASTIC EXTRUDED THRU- ATI Hose - Jafrib SNAP-TITE - PONN GLADIATOR Ati Hose - Jafline Hd THE-WEAVE LINED North American - Hi Flow a database of every test to ensure complete traceability from the factory to dealer to end-user through the entire life cycle (FG) Key - Eco 10, Key Big 10 SNAP-TITE - PONN CONQUEST (FC) Key - Pro Flow of the hose. This is what you should expect from the industry leader. SNAP-TITE - PONN GLADIATOR Niedner - Rxl 800 Mercedes - Deluge NF (FGN) North American - Poly Tuff 800 NYLON DOUBLE JACKET FIREQUIP - COMBAT MASTER WOVEN “NON-DELAMINATING” RUBBER NITRILE 3PLY DOUBLE The Firequip brands provides access to high quality hoses that are globally sourced for durability and value. When FLOW WOVEN POLYESTER DOUBLE JACKET THERMOPLASTIC EXTRUDED THRU- VULCANIZED Bulldog - Hi Combat & Fire Power THERMOPLASTIC LINED THE-WEAVE LINED SNAP-TITE - TPX departments rely on a hose that can offer price, quality and durability the Firequip by Snap-tite brand is there to provide II FIREQUIP - ATTACK LITE POLY SNAP-TITE - TRIPLE DUTY (TD) SNAP-TITE - ATX (300 solutions to their hose flow needs. We stand behind every hose that is assembled in our plant in North Carolina and Key - Combat Ready Bulldog - Ultima Lite PSI PRESSURE) Key - Combat Sniper Ati Hose - Jaflite WOVEN POLYESTER DOUBLE JACKET test each hose to ensure that it meets or exceeds NFPA standards. The Firequip history of high quality and exceptional Mercedes - Aquaflow Plus & Key - Lite RUBBER LINED NYLON DOUBLE JACKET customer service adds to our overall ability to service customers better and we are excited to welcome them to the family. Kraken Exo Niedner - Xl 800/Ultra 2000 SNAP-TITE - NATIONAL THERMOPLASTIC LINED Niedner - Ultra 2000 North American - Poly Flow 800 ADVANTAGE (NA) FIREQUIP - ATTACK LITE NYLON Mercedes - X Stream Mercedes - MTFS 80DP/ Aquaflow FIREQUIP - DJ800 North American - Tri Flow 600 Mercedes - X Stream II Plus/ MTSS - 800/ Carry Lite Key - Eco-10 Key - Magnum Lite We stand for honesty and integrity in dealing with customers, employees, suppliers and other stakeholders. That’s why we North American - Dura-Built have invested in test equipment and demo trucks to demonstrate scientifically in the lab and professionally in the field why WOVEN NYLON DOUBLE JACKET 600 POLYURETHANE EXTRUDED T our products are the best in the business. We know you don’t want to hear excuses if something goes wrong, and we won’t WOVEN HEAVY WEIGHT POLYESTER RUBBER LINED HRU-THE-WEAVE DOUBLE JACKET THICK RUBBER SNAP-TITE - NATIONAL N-DURA (ND) POLYESTER DOUBLE JACKET SNAP-TITE - KRYPTONITE (UTX) hide behind some technicality in our search for the root cause of whatever happened. We take corrective action when LINED FIREQUIP - DJ800 NYLON THERMOPLASTIC LINED Bulldog - Hi Vol TPU FIREQUIP - ATTACK LITE POLY necessary to ensure that our ISO 2015 processes and procedures will deliver quality and value each and every time we ship SNAP-TITE - PONN SUPREME (FS) Bulldog - Premier FIREQUIP - VICTORY SUPREME ATI- Jaflite HD ATI - Jafline (4” & 5”) a hose - after all, our first responders depend on their tools to keep them safe and we take our part in that promise very FIREQUIP - COMMANDER North American - Dura Built Niedner - Supply Line Mercedes - Megaflo seriously. SUPREME Key - Magnum Key - FDNY Special WOVEN NYLON DOUBLE JAKET WOVEN POLYESTER DOUBLE JACKET THERMOPLATIC LINED I invite you to take a closer look at the new (old) Snap-tite Hose through our catalogues, our web site and our sales and RUBBER LINED TRUE ID SNAP-TITE - NATIONAL N-DURA (DP) customer service representatives. Our sales team is ready to help you find the solution to your hose flow issue. If it's price, SNAP-TITE - GLADIATOR NF FIREQUIP - ATTACK LITE NYLON (FGN) Bulldog - Premier Lite performance, durability, innovation, or legacy - we've got you covered. FIREQUIP - CLASSIC EXACT ATI Hose - Jaflite Key – TRU ID North American - Dura Flow Mercedes - Exo - Metro North American - True Diameter RUBBER NITRILE/HIGH-RISE EXTRUDED 800 THRU-THE-WEAVE SNAP-TITE - LD RUBBER NITRILE THRU-THE-WEAVE Bulldog - High Power SNAP-TITE - HFX Key - Dura Flow RUBBER NITRILE/ 3PLY DOUBLE Bulldog - Red/Yellow Chief VULCANIZED ATI - Jafrib SNAP-TITE - TPX 814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 31 INNOVATIVE. HONEST. MANUFACTURED WITH YOU IN MIND. Innovation is great — but it's more impactful when it helps solve problems.
At Snap-tite Hose, we pride ourselves on being able to really listen to our customers when they say they need something better from fire hose.
Whether it's a hose that packs easier, is lighter weight, or really flows water — we listen and work to create products that solve our customers biggest problems. All while manufacturing our products to the highest standards and certifications.
We learned that hose products, particularly KLEAN HOSE ™ rubber hose products, were returned to a state that was 99% identical to the original INITIATIVE state of the hose if industrial soap and low Recent studies show that there is an increase in pressure water were used to clean the hose instances of diagnosed cancer in firefighters¹. after it was subject to being used.⁴ The exposure to wood smoke is linked to an increase in cancer² and firefighters are the Rubber hose products can be cleaned easier after front line of defense when a fire breaks out. use in fire fighthing, so they've earned the distinction Since firefighters regularly are exposed to wood of "Klean Hose" products in our catalog. fires they are at an increased risk for cancers including leukemia, lymphoma, or myeloma³. This symbol throughout our catalog means this hose is best in We set out in 2019 to answer one question: what makes a fire hose have less "things" on it? a clean hose system. When a hose with this symbol is combined with a We partnered with AirBoss of America, Co. to second hose with this symbol it means a study exactly what could be removed if a hose comprehensive attack and supply flow was cleaned after being exposed to fire. system that can be cleaned easiest after use. We found that cleaning a hose, especially a rubber hose, with a solution of mild soapy water For more on Klean Hose and our study, visit and rinsing with low pressure water made a big www.snaptitehose.com/klean-hose/ difference.
1- https://www.cdc.gov/niosh/firefighters/health.html 4 - Snap-tite-Hose-Clean-Hose-Scientific-Study (available by request - please call or 2- https://fortress.wa.gov/ecy/publications/publications/91br023.pdf email for copy) 3-https://www.lls.org/managing-your-cancer/firefighters-and-cancer-risk 32 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 DEMO TRUCKS BRING THE PROOF TO YOU. The best way to prove our hose outperforms the competition time and time again is to actually show you that it does.
Snap-tite Hose has demo trucks around the country that can mobilize any time a customer wants to see just how great our hose products are. Our Regional Sales Managers drive the truck to the location that works best for you and lets the customer try out our hose products - so you can truly see how our hose are the best in the industry.
We outfit the demo trucks with a variety of hose products and let customers flow water from any hose products they choose. The Regional Sales Manager helps customers decide what hose flow system and hose products work best for their needs.
Snap-tite Hose and our family of products, including Snap-tite Hose, Ponn, National Fire Hose, and Firequip brand products, are manufactured with the best and highest quality materials and are manufactured to the highest standards. We know that your hose system is a tool to help you effectively do your job while keeping you safe.
We've never compromised your safety to manufacture a "cheaper" product and are so confident in our products that we take them out and let customers everywhere flow water. Time and time again it proves our hose products outperform the competition.
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 33 COUPLINGS
3-LUG ALUMINUM LIBERATOR DIRECTIONAL ARROW STYLE S STORZ LDH COUPLING ROCKER LUG COUPLING COUPLING INCREASES SAFETY Lightweight cast aluminum, hard-coated Typical coupling supplied with municipal and The Liberator Directional Arrow Coupling to prevent corrosion and abrasion. Self- industrial hose. Twice as strong as brass and offers very durable directional indicators locking, three-part clamp design ensures only one-third the weight. Hard-coated for extra which are available in the NFPA colors. better coupling retention and reduces wear resistance and helps prevent damage Aluminum rocker lug hard coated hang-up when laying hose in the field. to swivel and threads. Three lugs on both aluminum increases resistance to damage. Available as extruded aluminum. male and female swivel. Expansion ring type.
2L QT BR BP
OPTION STYLE LHF/RLM FORESTRY HOSE - 2-LUG STYLE OPTION STYLE TYPE BRASS SOFT SUCTION LDH COUPLING (2L) & QUARTER TURN (QT) ROCKER (BR) OR BRASS PIN (BP) Suction hose couplings are extruded 6061- ALUMINUM COUPLING OPTIONS LUG COUPLING T6 lightweight, hard-coated, high-strength Choose either Standard threaded or quick Basic two-lug coupling that doesn’t snag aluminum alloy. Long handles are finger- attach forestry hose coupling that meets and rolls easily in use. Cast brass designed gripped and canted for clearance. Available USFS Specification No. 5100-108. Only for heavy duty industrial fire hose in Female Long-Handle, Female Rocker-Lug hard-coated extruded 6061-T6 lightweight, applications where corrosion is a concern. (RLF), Male Rocker-Lug (RLM) and male high-strength aluminum alloy couplings Brushed brass finish. Expansion ring type. configurations. Expansion ring type. are used. Expansion ring type.
Black Blue Gold Green Red ANODIZED COLORED COUPLINGS Snap-tite Hose offers lightweight, color-coded Storz couplings made from extruded, high-strength aluminum alloy with no castings used. Then the entire coupling is anodized to produce a long-lasting, hard coating that resists abrasion, chemicals and corrosion. These anodized, color- coded Storz heads and three-part collars are engineered to exacting standards to insure proper connection and disconnection each and every time. Ideally suited for mutual aid situations. Choose from black, blue, gold, green or red, available in both 4" and 5".
34 MUNICIPAL HOSE GUIDE | snaptitehose.com | 814-438-7616 PRODUCT WARRANTY Snap-tite Hose warrants under the following General Warranty Terms our entire double jacket, nitrile rubber NFPA and polyurethane fire hose products used in the municipal fire industry to be free from defects in materials and workmanship for a period of ten (10) years from the date of shipment. The 8T, Dura-Pak (DP) and Forestry PRESSURE product (8F/7F/2F) lines and all Firequip brand TPU lined hose products have a five (5) year warranty from the date of shipment, and all industrial use fire hose and agricultural hose have a one (1) year warranty from the RATING date of shipment. Products found to be defective in materials or workmanship will be repaired or replaced at the sole discretion of Snap-tite Hose within the first two (2) years of use, and will be replaced via a pro-rata DETAILS credit against new hose basis (age in use versus warranty period) after two years for products still within the SERVICE TEST PRESSURE: Annual warranty period. hydrostatic test to be conducted by OUR GENERAL WARRANTY IS LIMITED AS FOLLOWS: purchaser on all in-service (used) hose All returns must be accompanied by an RMA# (Return Materials Authorization) issued by Snap-tite Hose. to determine suitability for continued Unauthorized returns will be refused. All defective products must be returned freight pre-paid to Snap-tite use. The service test pressure is to be Hose within thirty (30) days of purchaser's claim. Products or parts must be found to be defective in materials 10% greater than the “normal highest and workmanship upon examination and testing by Snap-tite Hose. Total liability is limited to the purchase price of the goods. operating pressure” at which the hose is Products shall not be considered defective or nonconforming if they substantially fulfill performance expected to be used. Unless otherwise requirements and are manufactured in accordance with Snap-tite Hose specifications. This warranty will not instructed, this pressure is stenciled extend to goods which have been subject to misuse, accident, improper application, misapplication under on all hose prior to shipment. conditions not expressly made specifically known to or and approved by Snap-tite Hose in advance of use or which have been repaired or altered by any third party. PROOF/ACCEPTANCE TEST FOR THE FOLLOWING SELECTED PREMIUM MUNICIPAL HOSE PRODUCTS PRODUCED BY US IN OUR PRESSURE: PENNSYLVANIA PLANTS, SNAP-TITE HOSE OFFERS A TWO YEAR ACCIDENTAL DAMAGE WARRANTY: The “one-time” test pressure, performed • Conquest (FC) 1.75” and 2.5” in diameter when coupled with directional arrow couplings by the factory, on every new hose prior • Gladiator (FG, FGN) 1.75” and 2.5” in diameter when coupled with directional arrow couplings to shipment. The proof test pressure • TPX (TPX) 4” and 5” in diameter when coupled with Storz couplings shall not be less than two times (2x) the • ATX (ATX) 4” and 5” in diameter when coupled with Storz couplings • Conquest LDH (FC) 4” and 5” in diameter when coupled with Storz couplings specified service test pressure. • Triple Duty LDH (TD) 4” and 5” in diameter when coupled with Storz couplings BURST PRESSURE: The minimum Snap-tite Hose will repair or replace, at our option, any accidental damage to these specific products within this burst test pressure shall not be less than two-year warranty period. All hazards damage is limited to accidental occurrences due to fire, cuts, abrasion or other accidental destruction that occur during an active fire situation. three times (3x) the specified service test The following conditions apply: pressure. 1. Damaged hose must be returned to the factory freight prepaid for examination upon completion of OPERATING/WORKING PRESSURE: the Returned Material Authorization (RMA) process and according to the RMA process in effect at the time of the Maximum advised operating/working claim. 2. Determination of the applicability of this warranty is at the sole discretion of Snap-tite Hose. pressure that should not exceed 90% 3. Replacement will be like-for-like unless the customer authorizes a change and pays for the price of the service test pressure (which is difference; repairs will re-use undamaged couplings from the original hose. stenciled on the hose) or the maximum operating pressure of the attached LIFETIME WARRANTY AGAINST DELAMINATION coupling. Snap-tite Hose is committed to providing our customers with safe and reliable products. Unlike other manufactures who have glued-in linings, our proprietary manufacturing processes allow us to offer a lifetime warranty against delamination for the following product lines: • Ponn Conquest (FC) • Ponn Supreme (FS) • Ponn Gladiator (FG, FGN) • Ponn TRU-A-TAK (FST) • National N-Dura (NP) • National Triple Duty (TD) • Snap-tite Hose Kryptonite (UTX) • Snap-tite Hose TPX • Snap-tite Hose ATX • Snap-tite Hose HFX • Snap-tite Hose LD
814-438-7616 | snaptitehose.com | MUNICIPAL HOSE GUIDE 35 Product Jacket Lining Warranty Lifetime Delamination Ponn Gladiator - FG Polyester Extruded Thru-the- 10 years YES Weave Nitrile Rubber Firequip Combat Polyester Extruded Thru-the- 10 years YES Master Flow Weave Nitrile Rubber Ponn Conquest - FC Polyester Extruded Thru-the- 10 years YES Weave Polyurethane Snap-tite HFX Nitrile Extruded Thru-the- 10 years YES Weave Nitrile Rubber Snap-tite TPX Nitrile Nitrile Rubber 10 years YES Ponn Supreme - FS Polyester EPDM Rubber 10 years YES Firequip Victory Polyester EPDM Rubber 10 years YES Supreme Ponn Gladiator NF - Polyester Nitrile Thru-the-Weave 10 years YES FGN Extrusion National N-Dura- NP Nylon 6-6 EPDM Rubber 10 years YES National Dura-Pak Nylon 6-6 TPU - Thermoplastic 5 years NO - DP Polyurethane Firequip DJ800 Polyester EPDM Rubber 10 years NO Firequip Attack Lite Polyester TPU - Thermoplastic 5 years NO Poly Polyurethane - : 814-438-7616 | | snaptitehose.com
Take a test drive. Choose a reputable manufacturer. All hose should be kept out of direct sunlight in a well-ventilated location, and should be drained and thoroughly dried before storage. All hose should be kept out of direct sunlight in a well-ventilated location, and should be When rolling coiled hose, be sure male coupling is on the inside to avoid thread damage. edge or fold. Lay the hose across the bed in alternating Any hose stored in a hose bed should be loaded by laying the hose flat—never on its layers, rather than loading one row of hose all the way to the top of the hose bed. to allow for visual inspection. Hose should be removed and reloaded on the hose bed at least once every six months jacket. Avoid dragging hose along its edge or fold, as this causes excessive abrasion of the outer to cross the bridged hose. Never drive over the hose unless it is bridged and the vehicle has sufficient ground clearance pressure, which is stenciled on the hose. Maximum advised operating/working pressure should not exceed 90% of the Service Test Operating pressure Supply or attack rating Friction loss Flow data ID of fire hose Compact/packing of the hose Hose weight Kinking properties Abrasion resistance properties Heat and/or burn-through resistance properties Coating and colors per NFPA 1901 NFPA 1962 Standard for the Care, Use, Inspection, Testing of Fire Hose, latest edition NFPA 1962 Standard for the Care, Use, Inspection, latest edition NFPA 1963 Standard for Fire Hose Connections, NFPA 1961 Standard on Fire Hose, latest edition NFPA 1961 Standard on Insist on a quality guarantee.
Match hose performance ratings to your exact user requirements (see Comparative Guide on next page) Match hose performance ratings to your Insist on quality couplings. Ask about hose service tracking.
Choose certified hose.
MUNICIPAL HOSE GUIDE FIRE HOSE CARE & HANDLING RECOMMENDATIONS & HANDLING CARE FIRE HOSE performance and durability. The following everyday care Snap-titeHose products are built to meet the highest quality specifications for superior and handling recommendations will help to ensure a long service life from your product: • • • • • • • Before purchasing, and before the time of the bid, request whole length samples for evaluation to inspect quality, markings and performance of the fire Before purchasing, and before the time of the bid, request whole length samples for evaluation for a water flow hose evaluation. hose proposed for your department. Contact our Regional Sales Manager in your area ✔ service ratings. Additionally, verify if there is a Lifetime Do your homework. Make sure the hose is backed by a warranty guarantee and check customer Delamination Warranty (see previous page). ✔ • • • • • • • • • • • ✔ ✔ length and provide USA coupling manufacturer. The hose manufacturer should couple and proof test every The hose manufacturer should use a quality, certification. The hose should be 100% made in the Unites States of America and all components should be made in house, starting from quality raw materials all the States of America and all components should be made in house, starting from quality The hose should be 100% made in the Unites way through to final proof test. ✔ test records for hoses to ensure safety in the field. It is critical to maintain tracking and service ✔ • • Certified Quality Management System A certified hose manufacturer i.e. ISO 9001:2015 THE CHECKLIST: ✔ these industry requirements: Fire hose should meet • When it comes to ensuring firefighter safety and optimum performance on the fire ground, choosing the right fire hose is essential. While there are uni on the fire ground, choosing the right firefighter safety and optimum performance When it comes to ensuring and fighting two blazes a month or two a day?) department’s size and workload (are you it’s important to consider your versal industry hose specifications, your exact needs. in order to select the best hose to meet conditions (high rise fires or forest fires?) environmental and working CHOOSINGTHE RIGHT HOSE
36 37 Snap-tite Hose - Attack Hose Comparative Guide
DURABLE WEIGHT COMPACT PRICE
Ponn Conquest - FC Ponn Gladiator NF - FGN Firequip Attack Lite Poly Ponn Gladiator - FG Ponn Gladiator- FG National N-Dura - NP National Dura-Pak - DP Ponn Gladiator NF - FGN Ponn Gladiator NF - FGN Ponn Supreme - FS Firequip DJ800 Firequip Combat Master Flow Ponn Conquest - FC MUNICIPAL HOSE GUIDE Firequip Combat Master Flow Firequip Victory Supreme National N-Dura - NP | Snap-tite TPX National N-Dura - NP Firequip Victory Supreme Ponn Conquest - FC Snap-tite HFX Ponn Supreme - FS Ponn Gladiator - FG Ponn Supreme - FS Snap-tite TPX Ponn Supreme - FS Firequip Victory Supreme Firequip Combat Master Flow Firequip Victory Supreme Snap-tite TPX Snap-tite TPX Snap-tite HFX Ponn Conquest - FC Firequip Commander Supreme Snap-tite HFX Snap-tite HFX Ponn Gladiator NF - FGN Firequip Combat Master Flow
National Dura-Pak - DP | snaptitehose.com Firequip DJ800 Ponn Gladiator NF - FGN National Dura-Pak - DP Firequip DJ800 National Dura Pak - DP Ponn Gladiator - FG National N-Dura - NP Firequip Attack Lite Poly Firequip Attack Lite Poly Firequip Attack Lite Poly Firequip DJ800 814-438-7616
Product Jacket Lining Warranty Lifetime KINK RESISTANCE WARRANTY Delamination Ponn Gladiator - FG Polyester Extruded Thru-the- 10 years YES Weave Nitrile Rubber Ponn Gladiator NF - FGN Ponn Conquest - FC Firequip Combat Polyester Extruded Thru-the- 10 years YES Ponn Gladiator - FG Ponn Gladiator - FG Master Flow Weave Nitrile Rubber Firequp Combat Master Flow Firequip Combat Master Flow Ponn Supreme - FS Ponn Conquest - FC Polyester Extruded Thru-the- 10 years YES Ponn Conquest - FC Weave Polyurethane Snap-tite TPX Firequip Victory Supreme Ponn Gladiator NF- FGN Snap-tite HFX Nitrile Extruded Thru-the- 10 years YES Ponn Supreme - FS Weave Nitrile Rubber Firequip Victory Supreme National N-Dura - NP Nitrile Nitrile Rubber YES National N-Dura - NP Snap-tite TPX Snap-tite TPX 10 years Snap-tite HFX Snap-tite HFX Ponn Supreme - FS Polyester EPDM Rubber 10 years YES Firequip DJ800 Firequip DJ800 Firequip Victory Polyester EPDM Rubber 10 years YES National Dura-Pak - DP National Dura-Pak - DP Supreme Firequip Attack Lite Poly Firequip Attack Lite Poly Ponn Gladiator NF - Polyester Nitrile Thru-the-Weave 10 years YES FGN Extrusion National N-Dura- NP Nylon 6-6 EPDM Rubber 10 years YES National Dura-Pak Nylon 6-6 TPU - Thermoplastic 5 years NO - DP Polyurethane Firequip DJ800 Polyester EPDM Rubber 10 years NO Firequip Attack Lite Polyester TPU - Thermoplastic 5 years NO Poly Polyurethane Snap-tite Hose (for inquires on Snap-tite, National, PONN) Firequip (for inquires on Firequip by Snap-tite) 217 Titusville Road, Union City, PA 16438-8698 USA 127 N. Broad Street, Burlington, NC 27217 USA p 814-438-7616 f 814-438-8163 e [email protected] p 1-800-334-6823 f 336-227-5015 e [email protected] www.snaptitehose.com www.firequip.com
! WARNING ! FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND/OR PROPERTY DAMAGE. This document and other information from Snap-tite Hose, its subsidiaries and authorized distributors, provides product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operation conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described here, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Snap-tite Hose, and its subsidiaries at any time without notice. ISO 9001:2015 Certified Quality Management System Version 20200616