WHEELS AND RIMS • HUB COVERS
Team up with Hayes . . . Hayes Wheel has the most complete line of wheels available-for import or domestic cars; compact or full size; front or rear drive; light truck PASSENGER & LIGHT TRUCK WHEELS and trailer applications. Safety and performance inspection- Whenever you replace a tire, check for wheel damage that might require replacement.
Snow wheel convenience- Mount snow tire on a set of their own “snow wheels” . . .save time and effort and changeover time.
Compact spare replacement- For the motorist who rolls in on a compact spare and wants the security of a full-size tire and wheel.
Plus- Wheels for all types of trailers . . utility and cargo trailers, boat trailers, horse trailers and travel trailers. R. H. SCALES CO., 73 YEARS OF WHEEL EXPERIENCE!
HUB COVERS All Weather Wheel Covers Top quality durable wheel covers for use with snow tires and wheels, or to dress up your passenger car or light truck. Heavy Duty ABS Construction Specially formulated ABS to endure extreme temperatures. High quality brushed silver finish.
Sold individually Styles may vary
850713S - 13” Directional Silver 85414S - 14” 8 Spoke Silver 85415S - 15” 9 Spoke Silver 32116SHD - 16” 10 Spoke Silver 32117SHD - 17” 10 Spoke Silver
238 WHEELS AND RIMS
STEEL TRUCK WHEELS & RIMS
RIMS
The rim supported the tire. There are two types of rims: a single piece rim (tubeless-some16 inch single piece rims are either tubeless or tube-type) and a multi-piece rim (tube type). A SINGLE PIECE RIM is a continuous one-piece assembly. A MULTI-PIECE RIM is an assembly consisting of a base and either a side ring or a side and lock ring depending on the type. A DEMOUNTABLE RIM does not have a center disc and is clamped onto a cast spoke wheel.
TUBELESS DEMOUNTABLE RIM (SINGLE PIECE)
TUBE TYPE DEMOUNTABLE RIM ASSEMBLY ((MULTI-PIECE)
SPACER BAND Used on rear cast spoke wheels, the spacer band holds the two rims apart and provides proper dual spacing for the tires.
DISC WHEELS
A combination of a rim and a disc permanently attached to the rim and attached to the hub by studs and nuts.
TUBE TYPE DISC WHEEL ASSEMBLY
TUBELESS DISC WHEEL (2 mounting systems - see below)
Tubeless Disc Wheels Can Have a:
Inner dual CHARACTERISTICS Outer dual Hub pilots Hub-piloted wheels use two-piece flange nuts
Non-chamfered bolt holes identify Studs a hub-piloted wheel. Hub Or Two-piece finger Outboard brake nuts drum Cross section of typical dual assembly with hub-piloted wheels (Both right hand and left hand threads) Inner dual Outboard brake drum CHARACTERISTICS Outer dual Stud-piloted wheels use nuts with ball seat.
Inner cap nuts are used to locate Hub Studs inner dual in dual wheel assembly Cross section of Chamfered bolt Inner cap nuts typical dual assembly holes identify a Outer cap nuts with stud-piloted stud-piloted wheels (Both right wheel hand and left hand threads)
239 WHEELS AND RIMS
TRUCK WHEEL ATTACHING PARTS STUDS AND NUTS FOR DISC WHEELS
Typical examples of studs, nuts and clamping plates used with disc wheels are illustrated in this section. A typical stud (Fig.1) used with in-board brake drums has a thread on both ends, a shoulder with two flats, and is longer from the shoulder on the one end with an unthreaded section. The flat surfaces of the shoulder fit into the recessed outer surface of the hub to keep the stud from turning. The smooth portion is long enough to fit through the brake drum, and is then held in place by a back or jam nut (Fig.2). For outboard brake drums a serrated stud with threads on one side is typically used (Fig. 3).
On front stud mount wheels, an outer cap nut (Fig.4) or (Fig.6) is used. On stud mount rear dual wheel applications, the inner wheel is held in place by an inner cap nut (Fig.5) and the outer wheel by an outer cap nut (Fig.6).
For hub mount wheels which pilot from the center hole, flange nuts are used on both the front and rear wheels. One-piece flanged cap nuts (Fig.7) are used on light truck and medium truck applications. Heavy trucks and buses and some light trucks use a two-piece flange nut or swiveling lug nut (Fig.8) when hub mount wheels are used. Some light trucks use a clamping plate (Fig.9) and 90 degree cone nuts (Fig.10) for both the front and rear wheel. Light trucks which use single wheels on the front and rear axle require 90 degree cone nuts or 60 degree cone nuts (Fig.11), depending on the truck manufacturer.
RIM CLAMPS, STUDS AND NUTS FOR DEMOUNTABLE RIMS
The stud for cast spoke wheels (Fig.12), threaded on both ends, is installed in a threaded hole at the end of a spoke. The front clamp (Fig.13) and a rear clamp(Fig.14) hold the demountable rim in posi- tion with studs and nuts (Fig.15). A clamp for a three-spoke wheel with two stud holes is shown in (Fig.16).
240 WHEELS AND RIMS
ALUMINUM WHEELS LIGHT TRUCK WHEELS
Alcoa is America’s largest manufacturer of forged alu- minum wheels. Aluminum wheels are manufactured either in a “casing” or “forging” process. Alcoa produces forged aluminum wheels. Forged aluminum wheels are stronger than cast or steel wheels.
The forging process of an Alcoa wheel starts with an hot aluminum ingot, shaped under pressure, then machined and polished to perfection.
Alcoa wheels are not just for 18 wheelers. Alcoa now offers a full-line of forged aluminum wheels for light trucks, sport vehicles, RV’s and vans.
Light truck owners know the quality of Alcoa wheels and want Alcoa wheels and accessories on their truck.
15”, 16”, & 19.5” light truck wheels available.
HEAVY TRUCK WHEELS
The right wheel for your mounting needs. Whether your fleet runs on ball seat or hub-piloted wheels... or you’re considering super weight saving wide base wheels... you can get the Alcoa wheels you need right now. That’s because only Alcoa makes aluminum wheels for every major mounting type.
Stud or hub pilot 22.5” & 24.5” truck wheels available.
Stud or hub pilot 22.5” wide base wheels available.
NO-MAR RIM GUARD Fits 10 Hole 22.5, 24.5 Disc Wheels Prevents impact wrenches from leaving damaging grooves in aluminum, chrome or painted truck wheels. Made of flexible high impact nylon. MFR. NO. DESCRIPTION NMRG NO-MAR Rim Guard
Wheel caps, lug nuts, & nut covers in stock now - see pg. 242
241 LIGHT & HEAVY TRUCK WHEEL ACCESSORIES
FRONT HUB CAPS, SNAP IN (for stud & hub pilot, steel and aluminum 22.5” & 24.5” duals)
PART # DESCRIPTION 4-4 fits 8 23/32”pilot diameter, 4 notches on back rim of cap 4-4H same as above, has cutout in center of cap for hubodometer 4-5 fits 8 23/32” pilot diameter, 5 notches on back rim of cap 4-5H same as above, has cutout in center of cap for hubodometer 4-6 fits 8 23/32” pilot diameter, 6 “evenly spaced” notches on back rim of cap 4-6N same as above, 6 notches on back rim of cap unevenly spaced
FRONT HUB CAPS, LUG MOUNTED (for light, medium, & HD trucks, steel & aluminum duals)
PART # DESCRIPTION 2S 22.5” & 24.5”, 10 on 11.25” or 10 on 285.75mm bolt patterns USE KA4-4 2SH same as above, has cutout in center of cap for hubodometer 44US 17.5”, 19.5”, 20”, 22.5”, 6 on 8.75” bolt pattern 94 19.5”, 20”, 22.5”, 10 on 7.25” bolt pattern 64UE 16” & 16.5”, 8 on 6.5” bolt pattern (simulated lug nut covers) 64UEOE same as above, with cutout for 4WD axle (simulated lug nut covers)
REAR AXLE COVERS (derby style for lt., medium, & HD trucks, steel & aluminum duals)
PART # DESCRIPTION 5US 22.5” & 24.5”, 10 on 11.25” or 10 on 285.75mm bolt patterns 5USH same as above, has cutout in center of cap for hubodometer 5U8 19.5”, 22.5”, & 24.5”, 8 on 275mm bolt pattern 45US 17.5”, 19.5”, 20”, 22.5”, 6 on 8.75”, bolt pattern 95 19.5”, 10 on 7.25” bolt pattern 65UE 16” & 16.5”, 8 on 6.5” bolt pattern (simulated lug nut covers) LUG NUT COVERS
PART # DESCRIPTION NC1000 1” hex stainless steel- older GMC light trucks NC1000T 1” hex stainless- later model GMC light trucks (taller for longer stud) NC1012D 1 1/2” hex stainless- “Budd” wheels w/ double cap nuts (stud pilot) NC1014 1 1/4” hex chromed stainless- “Dayton” style rim clamp nuts NC1016F 1 1/16” hex flanged stainless- 84+ Ford light trucks NC1018F 1 1/8” hex flanged stainless- GMC, Ford, Dodge 1 pc. flanged nut PART #600 NC1030F 30mm hex flanged stainless- GMC medium duty (19.5”) Installation Tool for Hub Cover NC1033F 33mm hex flanged stainless- 10h unimount (hub pilot) wheels NC1041 41mm hex stainless- medium duty import trucks w/ double cap nuts (stud pilot) Systems 076185, 076188 and NC1078F 7/8” hex flanged stainless- older GMC, late model Ford light trucks 077188 H150 (=L004) 1 1/2” hex Alcoa “Hug-A-Lug” spring loaded cover- “Budd” wheels (stud pilot) H180 (=L005) 35mm hex Alcoa “Hug-A-Lug” spring loaded cover- Unimount wheels (hub pilot) H181 33mm hex • 31mm High Cover Chrome H188 33mm threaded with inner threaded clamp ring (for 076188, 077188 kits) COMPLETE ALCOA HUB COVER SYSTEMS
PART # DESCRIPTION 076188 1 steer axle cap & 10-L005 nut covers for unimount front wheel 077188 1 drive axle cap & 10-L005 nut covers for unimount rear wheel 076155 1 steer axle cap & 10-L004 nut covers for “Budd” front wheel 077155 1 drive axle cap & 10-Loo4 nut covers for “Budd” rear wheel
REAR AXLE END HUB COVERS (for stud and hub pilot, steel and aluminum 22.5” & 24.5” duals)
PART # DESCRIPTION 9 universal 8 1/2” axle end cover, use with 5/8” drive flange studs 9H same as above, has cutout in center of cap for hubodometer 11 universal 8 1/2” axle end cover, use with 3/4” drive flange studs 11H same as above, has cutout in center of cap for hubodometer
242 WHEEL SIMULATORS & COVERS
DUALLY WHEEL SIMULATORS
These wheel simulators for dual wheels are manufactured by Kaper II, Inc., one of the original pioneers in the industry, and are made of “bright” polished no. 304 stainless steel. Limited Lifetime Warranty
PART # WHEEL SIZE/BOLT PATTERN STYLE** APPLICATION 1602F-UE 16”/16.5”, 8 on 6.5” 2WD lug mt. front or tag axle, F, Ch, Dg. (2 covers) 1604-C35 16” 8° on 6.5” lug mounted fits Accu-Ride ‘01+ Chevy NBS 29588, 29361 (x45477) 1604-EZN 16”, 8 on 6.5” 2WD, 4WD OTL Universal, Fits most applications 1604-4F92 16”/16.5”, 8 on 6.5” 4WD, OTL Ford (92+), custom fit 1604-6P 16”, 6° on 222mm lug mounted fit medium duty import trucks (FS28860) 1610-EZN 16”, 10° on 7.25” over the lug Ford (88+), custom fit, Super Duty 29223ULT 16” 8° on 170mm lug mounted fits Accu-Ride ‘02 & earlier Ford Super Duty 29579-ULT 16”, 8° on 6.5” over the lug Ford E-350 w/ 8 rd. cutouts on wheel 29583ULT 16” 8° on 170mm lug mounted fits Accu-Ride ‘03 plus Ford Super Duty
29837ULT 17” Dual 8 on 170 mm 2WD, 4WD OTL 05+ Ford F350
1954I 19.5 6° on 222mm lug mounted fits Accu-Ride #29506 1954-10N-1 19.5”, 5/10 on 7.25” lug mounted P-30 & Class A motorhomes 1958-4ULTG 19.5”, 8 on 275mm over the lug GM/Ford w/ 30mm hex lugs 1958-4ULTI 19.5”, 8 on 275mm over the lug IH, Freightliner, Ford w/ 32mm hex lugs 29186ULT 19.5 x 6 8 on 225mm lug mounted fits Accu-Ride #29186 ‘99-02 29584ULT 19.5 x 6 8 on 225mm lug mounted fits Accu-Ride ‘03+ Ford Super Duty 29736ULT 19.5 x 6.75”, 8 on 225mm over the lug ‘99 Ford SuperDuty 29839ULT 19.5 x 6 10 on 225mm 2WD, 4WD OTL 05+ Ford SuperDuty
2252FC-82 22.5x8.25”, 10 on 11.25” lug mounted fits Accu-Ride #27404, fronts 2252RC-82 22.5x8.25”, 10 on 11.25” lug mounted fits Accu-Ride #27404, rears 2254C-7510 22.5x7.50”, 10 on 11.25” lug mounted fits Accu-Ride #27403
2452FC-82 24.5x8.25”, 10 on 11.25” lug mounted fits Accu-Ride #27406, fronts 2452RC-82 24.5x8.25”, 10 on 11.25” lug mounted fits Accu-Ride #27406, rears
** the “Style” Column refers to how the simulator is mounted on the wheel; “lug mount” simulators are actually held on by the lug nuts of the vehicle, while “over the lug” (OTL) simulators are held on by a series of lock nuts thread- ed on to the end of the vehicle’s studs
RING MOUNT SIMULATORS
Kaper’s unique and patented ring mount system, can be used on both dual wheels & rims, and is installed using an expanding and locking ring inside the wheel’s rim contour. Front styles have a highly positive off- set (like a front “Budd” type) and the rear style has a less positive offset to imitate a rear drive or trailer application. Security screws hold the cover in place. PART # DESCRIPTION 175F 17.5” rims/wheels, front style, mod style 175R 17.5” rims/wheels, rear style, mod style 195F 19.5” wheels, front style, mod style 195R 19.5” wheels, rear style, mod style 225F 22.5” rims/wheels (including wide base), front style, 2HH 225R 22.5” rims/wheels (including wide base), rear style, 2HH
16” “EAZZY ON” WHEEL COVERS
“Eazzy On” covers are for single wheel applications and are made of highly polished stainless steel. They attach using a 360 degree retention ring, that is sure to hold on all applications. PART # DESCRIPTION 16EZN 16” wheels, universal for trucks/trailers (except Ford F-350)
243
WHEEL ADAPTERS
REAR DUAL WHEEL ADAPTER (CONVERSION) KITS
DUAL WHEEL ADAPTER INSTALLATION Typical 2 or 4 wheel drive Please Note: Use only Hayes, & Accu-Ride steel or Alcoa Aluminum wheels. The use of any other wheel will void manufacterer’s warranty!!
NEW!
EXISTING AXLE
HUB 4.12” FRONT
TIRE & WHEEL
EXISTING AXLE HUB
REAR 3.00”
TIRES & WHEELS
Now, you can convert your 2WD or 4WD 3/4 or 1 ton truck with single wheels to a factory style dual wheel truck. This adapter kit will add stability to any former single wheel truck to aid in plowing, load carrying, towing, etc. However, it will not increase the vehicle’s load carrying capacity (total GVW), DO NOT OVER- LOAD!!!!
Kits include two aircraft aluminum spacers and sixteen grade 8 heat treated 9/16” studs & nuts. All kits are custom machined for specific applications, so every kit fits safely and precisely. PART # DESCRIPTION 3000D 94’ - up Dodge 3001 86-98 Ford 3001A Pre 86 Ford - pre 88 Chevy 3002 88-00 Chevy 3003 01 + Chevy NBS 3099 99 + Ford SD 8-170mm REMA Tool to bore out hooks on 7529186 Note: Stock rear kits only, all front kits special order, approximately one week lead time.
244 RUBBER/ POLYMER PRODUCTS
THERMO FLEX FENDER GUARD - SINGLE WHEELS
Buyers thermo-flex fender guards are produced with a high - density poly- mer developed specifically for strength and stability. These splash guards are designed with a flare to confirm to the truck or trailer body.
Polymer Fender Splash Guards PART NO. COLOR SIZE B1018PPB Black - Small 18L x 10W B1237PPB Black 37L x 12W
HEAVY DUTY RUBBER SPLASH GUARD - DUAL WHEELS
Buyers heavy duty rubber splash guards are produced with all rubber for greater strength and longer wear. These splash guards are available in a variety of sizes to fit most trucks and trailers. Heavy Duty Rubber Splash Guards 1/4" Thick PART NO. STYLE SIZE B2018LSP Plain 20" L x 18" W
HEAVY DUTY RUBBER WHEEL CHOCK
Designed for unusually heavy loads. Built to OSHA standards. Convenient molded handhold & chain eye. PART NO. DESCRIPTION SIZE WC2556A Heavy duty rubber wheel chock 7” W x 8” L
RUBBER WHEEL CHOCK
Wheel chocks are made of tough, reinforced rubber. Resistant to sun, salt, oil and acid. Practically indestructible . PART NO. DESCRIPTION SIZE WC1468 Rubber wheel chock 8” W x 5” x 6” WC1468 WC1467 Rubber wheel chock 5” W x 5” x 6” WC1086 Rubber wheel chock 9” W x 8” x6” with metal eye bolt
WC1467 WC1086
245 TIRE REPAIR MATERIAL
PATCHES, PLUGS & ACCESSORIES RAD100 SERIES RADIAL REPAIR UNITS
Rema Tip Top’s famous RAD100 Series Radial Repair Units, another member of Rema’s Blue Bonding SystemTM, revolutionized radial tire repair. With far better adhesion power than most other repair systems and an extensive range of sizes, Rema RAD100 Series Radial Repair Units can be cold or hot vulcanized, making them an ideal choice for tire dealers, retreaders or fleets. RAD100 Series repair units are specially constructed to absorb and disperse high flex forces. When used with Special Cement BL, the center-over-injury repair units become a dynamic part of any radial tire. STOCK NO. SIZE PLIES UNITS/BOX CAR TRUCK RAD-110 2x2 3/4” 1 20 • RAD-112 2 3/8x4 1/8” 1 10 • RAD-114 3x4 3/4” 1 10 • RAD-120 4 7/8x3” 2 10 • RAD-122 6 7/8x3” 2 10 • RAD-124 8 1/2x3” 2 10 • RAD-125 4 1/2x4 7/8” 3 10 • RAD-126 2 7/8x10 1/2” 3 10 • RAD-128 2 7/8x13 1/8” 3 10 • RAD-135 5 1/4x7 1/4” 4 10 • RAD-140 7 7/8x3 15/16” 3 10 • REMA MINICOMBI REPAIR UNITS & ACCESSORIES
Rema Tip Top’s most popular repair unit, Minicombi sets a new standard in one-piece repair units, making complete permanent nail hole repairs on passenger, performance, light truck and truck tires simple and easy. Part of Rema’s renowned Blue Bonding SystemTM, Minicombi features a metal pilot guide for easy installation and seating. Specially developed for tread area punctures on both radial and bias ply tires, Minicombi should be used with Special Cement BL. STOCK NO. OLD STOCK NO. DESCRIPTION UNITS/BOX A3 670 1/8” Minicombi A3 50 A6 673 1/4” Minicombi A6 40 A6-R 673RP 1/4” Minicombi A6 8 A-36 KIT 676 Minicombi Combo Kit (25 A3s & 20 A6s) 1 B8-MC 680 5/16” Minicombi B8 20 B10 684 3/8” Minicombi B10 18 CC-3 6456 1/8” Carbide Cutter 1 CC-6 6451 1/4” Carbide Cutter 1 CC-8 6459 5/16” Carbide Cutter 1 CC-10 6450 3/8” Carbide Cutter 1 BL-5 Special Cement BL, 50gm Tube 1 BL-8 Special Cement BL, 8 oz. Brush Top Can 24 See Cutters, Buffing Tools, Rasps & Finishing Stones sections for specially designed Combi Cutters. PN BIAS PLY TIRE REPAIR UNITS
Designed specifically for everything from nail hole to section repairs of bias ply tires, Rema’s PN Bias Ply Tire Repair Units, another member of Rema’s exclusive Blue Bonding SystemTM, can be used with either a cold or hot vulcanizing process and will deliver reliable and durable adhesion, regardless how they’re applied. Because they have a high temperature resistance, PN Repair Units are ideal for retreading systems. With high tensile nylon cords for maximum patch strength and exceptional flexibili- ty, easy-to-install unidirectional PN Repair Units allow users to perform even the largest section repairs with complete confidence. PN Repair Units are available in a variety of sizes (passenger through giant earthmover tires) and larger PN units (agricultural, logger, skidder, flotation and OTR applications) are pre-contoured to provide a better, more reliable fit in the tire. PN Units For Tread & Shoulder Injuries/Passenger, Light Truck & Truck Tires STOCK NO. SIZE PLIES UNITS/BOX PN-0 1 1/4” 1 50 PN-1 2 1/2” 1 30 PN-2 3 1/4” 2 20 PN-3 4” 2 10 PN-4 5 3/4” 2 10 PN-5 6 1/2” 4 10 PN-6 9 1/4” 6 10 PN-7 11 3/4” 6 10 PN-8 13 1/2” 6 5
246 TIRE REPAIR MATERIAL
PATCHES, PLUGS & ACCESSORIES PN UNITS FOR TREAD & SHOULDER INJURIES/OTR TIRES
STOCK NO. SIZE PLIES UNITS/BOX PN-30 10” 6 3 PN-31 14” 6 3 PN-32 18” 8 2 PN-33 22” 8 2 PN-34 26” 10 1 PN-35 30” 12 1 PN-36 34” 14 1
PN UNITS FOR SIDEWALL INJURIES/OTR TIRES
STOCK NO. SIZE PLIES UNITS/BOX PN-30S 10” 6 3 PN-31S 14” 6 3 PN-32S 18” 8 2 PN-33S 22” 8 2 PN-34S 26” 10 1 PN-35S 30” 12 1 PN-36S 34” 14 1
PN UNITS FOR TREAD, SHOULDER & SIDEWALL INJURIES/INDUSTRIAL TIRES
STOCK NO. SIZE PLIES UNITS/BOX PN-40 7” 4 2 PN-41 8 3/4” 6 2 PN-42 10 1/4” 8 2
PN 50 SERIES BIAS PLY REPAIR UNITS
Designed specifically for agricultural and OTR tire repairs, Rema’s new PN 50 Series Bias Ply Repair Units are ideal for tread area and sidewall section repairs. PN 50 Series Repair Units feature a 900 cord angle for greater compatibility with the flexing action of tires under load. And the highly flexible PN 50 Series units are much easier to install. In addition, PN 50 Series Repair Units feature a ply-end cover strip to eliminate cord breakout. Each size is available in two ply levels, providing outstanding coverage and allowing the repair technical to select the right unit for the job. “S” units are designed for sidewall injuries only.
STOCK NO. SIZE PLIES UNITS/BOX PN-50 9 1/2” 4 3 PN-50+ 9 1/2” 6 3 PN-52 14” 6 3 PN-52+ 14” 8 2 PN-54 19” 8 2 PN-54+ 19” 10 2 PN-56 26” 10 2 PN-56+ 26” 12 2 PN-56S 26” 10 2 PN-56S+ 26” 12 2 PN-58 32” 12 1 PN-58+ 32” 14 1 PN-58S 32” 12 1 PN-58S+ 32” 14 1 PN-60 39 3/4” 14 1 PN-60+ 39 3/4” 16 1
247 TIRE REPAIR MATERIAL
PATCHES, PLUGS & ACCESSORIES UNIVERSAL PATCH
The only patch you’ll ever need for most nail hole repairs on radial on radial or bias passenger, per- formance, light truck or truck tires. Part of Rema’s exclusive Blue Bonding SystemTM, Universal Patch is specially reinforced for outstanding durability and reliability, and formulated to provided maximum flexibility. The non-directional, center-over-injury Universal Patch is available in boxes or convenient and cost effective pails. STOCK NO. DESCRIPTION UNITS/BOX UP-3 1/8” Universal Patch 100 UP-6 1/4” Universal Patch 50 UP-8 5/16” Universal Patch 50 UP-6P 200 UP-6 Patches in Pail 200/Pail UP-8P 150 UP-8 Patches in a Pail 150/Pail BL-8 Special Cement BL 8oz. Brush Top Can 24
RX RADIAL REINFORCED PATCHES
Specially designed for small nail hole repair on radial passenger, performance, light truck and truck tires, Rema’s RX Radial Reinforced Patches are perfect for tread area and sidewall repair. STOCK NO. DESCRIPTION UNITS/BOX RAD-00 1 3/16” Round RX Radial Reinforced Tread Area Repair 10 RAD-0 1 9/16” Round RX Radial Reinforced Tread Area Repair 10 RAD-1 2 3/4”x1 5/8” Non-Reinforced Radial Tread & Sidewall Repair 10
TUBE PATCHES REMA RED EDGE TUBE PATCHES
Rema Tip Top’s extensive line of high quality tire tube patches are renowned for their easy application and extraordinary effectiveness. With sizes for motorcycle, passenger, light truck, medium/heavy truck, agricultural and small off-the-road tire tube repairs, Rema Tip Top Tube Patches feature Rema’s famil- iar double-scalloped feathered edge to ensure perfect bonding and complete vulcanization, and a unique rubber compound that allows the patch to stretch evenly and equally in all directions upon inflation, assuring a reliable bond and minimal bulging in any service condition. All in convenient dis- penser packs.
Refer to size chart on pages 3 & 4 for actual patch sizes. STOCK NO. SIZE UNITS/BOX ATV CAR TRUCK TRACTOR OFF ROAD 0 1 1/4” Round 100 • • 1 1 1/2” Round 30 • • 2 1 3/4” Round 30 • • 3 2” Round 30 • • • 4 3” Round 30 • • • • 5 3 3/4” Round 10 • • • 6 4” Round 10 • • • 7 3x1 1/2” Oval 30 • • 7A 4x1” Oval 30 • • • • 7B 6x2” Oval 10 • • • 7C 7 1/4”x3 1/2” Oval 10 • • • 7D 9x4 3/4” Oval 10 • • • 8 9x2 1/4” Oval 10 • • •
248 TIRE REPAIR MATERIAL
VULCANIZING FLUIDS, CEMENTS & LIQUID PRODUCTS
TIRE REPAIR SEALANT & MOUNTING PASTE
Repair Sealant is designed for use around the edges of reair units, overbuff areas and on porous innerliners. Rema Repair sealant creates an airtight seal, improving the integrity and reliability of repairs. Rema’s Tire mounting paste applies with a brish, and will not discolor or corrode aluminum or alloy wheels, won’t freeze or harden, reduces wear and tear on mounting equipment, and dries quickly so the tire won’t spin on the wheel. STOCK NO. DESCRIPTION 76G 76 75 76 Repair Sealant, 16 oz. Brush Top Can 76G Repair Sealant, 1 Gallon Can 73 75 Universal Mounting Paste, 7.7 lb. Container 73 Brush for Mounting Paste
REMA RIM/BEAD SEALER
Rema’s non-flammable Rim/Bead Sealer stops minor seal leaks between the tire bead and rim, partic- ularly on truck, agricultural and OTR tires. STOCK NO. DESCRIPTION 960 Rim/Bead Sealer, 32 oz. Brush Top Can
REMA TIRE TALC
Tire Talc makes tube and liner installation a breeze, helps eliminate tube and liner damage caused by pinching, folding, friction and sticking, and also eliminates chaffing of tubes on repair units. STOCK NO. DESCRIPTION 63 Tire Talc, 1lb. Shaker Top Canister
REMA MOISTURE GUARD PNEUMATIC TOOL OIL
Developed especially for tire and retreader shop air tools, Rema Moisture Guard Pneumatic Tool Oil keeps them running smoothly and helps eliminate damaging moisture. STOCK NO. DESCRIPTION 77 Moisture Guard Oil, 16 oz. Can
249 TIRE REPAIR MATERIAL
VULCANIZING FLUIDS, CEMENTS & LIQUID PRODUCTS REMA PRE-BUFF CLEANER
Possibly the most important step in any tire repair is cleaning the innerliner around the injury. Rema Tip Top’s Pre-Buff Cleaner dissolves mold-release lubricant and loosens other contaminants so that they can be removed using Rema’s Rubber Scraper, creating a clean, solid surface for any repair unit. And Rema’s Pre-Buff Cleaner is the perfect solution for crayon marks, grease and oil smears, and rub- ber skid marks on equipment. Available in easy-to-use aerosol cans or bulk containers. STOCK NO. DESCRIPTION 70 Pre-Buff Cleaner, 16 oz. Spray Can 71 Pre-Buff Cleaner, 32 oz. Spout Top 69 Pre-Buff Cleaner, 1 Gallon Can 28 Rubber Scraper 27 Replacement blades for Rubber Scraper 6020 16 oz. Aluminum Cement Dispenser With Brush Top
REMA SPECIAL CEMENT BL
The lynch pin of Rema’s exclusive Blue Bonding System,TM Special Cement BL creates a nearly inde- structible bond between tire and repair unit. Specially formulated for use in all types of tire repair, spe- cial accelerator solution that can be used equally well in both cold and hot vulcanizing. STOCK NO. DESCRIPTION BL-5 Special Cement BL, 50gm Tube BL-8 Special Cement BL, 8 oz. Brush Top Can BL-32 Special Cement BL, 32 oz. Can BL-G Special Cement BL, 1 Gallon Can 6020 16 oz. Aluminum Cement Dispenser With Brush Top
REMA COLD VULCANIZING FLUID
Rema Tip Top’s Cold Vulcanizing Fluid, designed for use with our line of tube patches as well as valve patches and rubber-based valves, is available in a wide-range of sizes, from 25gm tubes up to one gallon containers. STOCK NO. DESCRIPTION 203 Cold Vulcanizing Fluid, 8 oz. Brush Top Can 204 Cold Vulcanizing Fluid, 32 oz. Can 205 Cold Vulcanizing Fluid, 1 Gallon Can
TIRE REPAIR HAND TOOLS REMA SKIVING KNIVES & STITCHERS
Proper skiving and stitching are important elements of any section repair. Rema Tip Top’s line of high quality knives and durable ball bearing stitchers are built to last. STOCK NO. DESCRIPTION UNITS/BOX 6007 Skiving Knife, Flexible Round Point Blade 1 6008 Skiving Knife, Tapered Point 1 6017 Skiving Knife, Narrow 6” Blade 1 6018 Skiving Knife, Standard 6” Blade 1 6019 Rubber Scissors, 8” 1 6004 Ball Bearing Stitcher, 1x1/8” 1 6005 Ball Bearing Stitcher, 2x1/4” 1 6006 Ball Bearing Stitcher, 2x2” 1 250 TIRE REPAIR MATERIAL
TIRE REPAIR HAND TOOLS REMA RADIAL HAND RASPS & AWLS
Designed to roughen nail holes for reliable repairs, Rema’s line of Radial Hand Rasps are made of high quality, tempered carbide steel and are mill cut for exacting sharpness and diameter. Rema’s Awl is designed for probing the probing the injury to determine the extent of damage. STOCK NO. DESCRIPTION UNITS/BOX 190 Awl 1 6003 Radial Hand Rasp, 1/4” for Super Radial Anchor Seal Kit 1 6003T Radial Hand Rasp, 1/4”, for Truck Tires 1
REMA BIAS HAND RASPS
Rema Tip Top’s line of mill cut Bias Stickleback Hand Rasps are available in a wide range of sizes, and are made of high quality, tempered steel. Handles made of durable, high impact plastic. STOCK NO. DESCRIPTION UNITS/BOX 199 Bias Stickleback Rasp 1 0-R 4 1/2” Stickleback Rasp 1 1-R 6 3/4” Stickleback Rasp 1 2-R 9” Stickleback Rasp 1 3-R 13” Stickleback Rasp 1
REMA HAND BUFFERS
Sometimes a buffing wheel just won’t do. Rema’s quality Hand Buffers keep their edge repair-after- repair. Easy to clean blades are available in replacement packs. STOCK NO. DESCRIPTION 31 Hand Buffer, Straight Steel With Replacement Blade 32 Replacement Pack, 10 Straight Steel Blades
CUTTERS, BUFFING TOOLS, RASPS & FINISHING STONES WIRE BRUSHES/WHEELS
Encapsulated Wire Brushes- run at 5,000 rpm maximum- are perfect for removing rubber from around steel cords, while the Rotary Wire Brush helps remove scorched rubber from buzzouts. STOCK NO. DESCRIPTION 6055 2” Encapsulated Wire Brush (5,000 rpm max.) 6056 3” Encapsulated Wire Brush (5,000 rpm max.) 6057 3” Rotary Wire Brush (5,000 rpm max.) 6053 1/4” Drive Arbor for 6057 Rotary Wire Brush
MISCELLANEOUS BUFFING & CUTTING TOOLS
STOCK NO. DESCRIPTION 6425 2” Rotary OTR Tire Gouge, 1/2” Arbor 33 1/4” Drill Arbor For Mounting Buffing Wheels 34 2 1/2” Diameter Tungsten Carbide Round Nose Buffing Wheel, Fine Grit 788 Two 2 1/2” Diameter Tungsten Carbide Round Nose Buffing Wheels, Fine Grit, Mounted Back-to-Back on Arbor 6333 2” Diameter Tungsten Carbide Round Nose Buffing Wheel
251 TIRE VALVES AND HARDWARE
SNAP-IN TUBELESS PASSENGER/LIGHT TRUCK TIRE VALVES
Industry standard all-rubber snap-in valves for tubeless bias or radial passenger and light truck tires. Comes complete with plastic dome-type valve cap and valve core. STOCK NO. DESCRIPTION TR NO. T13R* 1 1/4” Long Snap-In Valve, .453” rim hole 413 T14R 1 1/2” Long Snap-In Valve, .453” rim hole 414 T18R* 2” Long Snap-In Valve, .453” rim hole 418 T23R 2 1/2” Long Snap-In Valve, .453” rim hole 423 T15R 1 1/4” Long Snap-In Valve, .625” rim hole 415 T25R 2” Long Snap-In Valve, .625” rim hole 425 437 Motorcycle Valve, .327” rim hole 430 VS911R Tornado/Eldorado Clamp-in Valve 417 VS902VL Oval Base Clamp-in 416VL LE600R 1 1/4” rubber/brass snap-in, .453” rim hole 600hp LE602R 2” rubber/brass snap-in, .453” rim hole 602hp •available with chrome sleeve also
CUSTOM WHEEL CLAMP-IN TUBELESS TIRE VALVES
Today’s high performance custom wheels need special valves. Quality Custom Wheel Clamp-In Tubeless Tire Valves fit both .453” and .625” rim holes, and are recommended for all air pressure lev- els above 30 psi. Comes complete with dome-type valve cap and valve core. STOCK NO. DESCRIPTION TR NO. VS944/5 1 7/16” Long Custom Wheel Clamp-In Valve 416
TUBELESS TIRE VALVE EXTENSIONS
Rema’s Tubeless Tire Valve Extensions are perfect for those hard-to-reach passenger and light truck tire valves. Both plastic and metal valve extensions are available. STOCK NO. DESCRIPTION UNITS/BOX 686P 3/4” Plastic Valve Extension 50 688P 1 1/4” Plastic Valve Extension 50 689P 1 1/2” Plastic Valve Extension 50 6241M 3/4” Metal Valve Extension 10 6241G 1 1/4” Metal Valve Extension 10
CLAMP-IN BRASS TRUCK VALVES
High quality straight brass Clamp-In Valves for tubeless truck and bus tires. All with standard 5/8” side hole mount. Complete with fork-type valve cap and valve core. STOCK NO. DESCRIPTION TR NO. T501R 1 21/32” Long Clamp-In Brass Valve 501 T500R 2 5/32” Long Clamp-In Brass Valve 500 T570R 3 9/32” Long Clamp-In Brass Valve 570 T571R 3 17/32” Long Clamp-In Brass Valve 571 T572R 3 29/32” Long Clamp-In Brass Valve 572 T573R 4 17/32” Long Clamp-In Brass Valve 573 T574R 5” Long Clamp-Brass Valve 574 462 Replacement Rubber Grommets RG-15
252 TIRE VALVES AND HARDWARE
METRIC CLAMP-IN TRUCK VALVES
Designed for tubeless truck and bus tires mounted on aluminum wheels with 9.7mm (.389”) valve holes, these high quality Clamp-In Valves come in a wide range of metric sizes. STOCK NO. DESCRIPTION TR NO. VS902VL Oval Base Clamp-In Valve 416 VS543 59mm Clamp-In Valve 543 VS543D 60mm Clamp-In Valve, with 600 bend 543D VS544D 73mm Clamp-In Valve, with 600 bend 544D VS545D 91mm Clamp-In Valve, with 600 bend 545D
ALUMINUM WHEEL TRUCK VALVES
Specially designed for use on drop-center aluminum truck wheels, these high quality single-bend steel valves have a 5/8” bottom hole, and come complete with dome-type valve cap and valve core. Replacement rubber grommets also available. STOCK NO. DESCRIPTION TR NO. VS946R 4 3/4” Long Aluminum Wheel Valve 509 VS879R 5 1/2” Long Aluminum Wheel Valve 510 523 Replacement Rubber Grommets RG-46
TRUCK/BUS TIRE VALVE EXTENSIONS
Solid brass Valve Extensions are ideal for those hard-to-reach tubeless truck and bus tire valves. Extensions come complete with fork-type valve cap and hex-nut base. STOCK NO. DESCRIPTION 402 2 1/4” Long Truck/Bus Valve Extension 403 3 1/8” Long Truck/Bus Valve Extension 404 4 1/8” Long Truck/Bus Valve Extension 405 5 1/4” Long Truck/Bus Valve Extension
AGRICULTURAL/OTR CLAMP-IN VALVES
Brass clamp-in valve allows rapid filling of air or liquids used to add weight and improve the capabili- ties of agricultural and OTR tires. Both units feature fast flow valve cores, and come complete with fork-type valve caps. STOCK NO. DESCRIPTION TR NO. VS714AR Agricultural/OTR Clamp-In Valve, large bore, fast flow valve core 618-A VS921AR Agricultural/OTR Clamp-In Valve,2 31/32” long with 650 bend, 621-A fits .625” rim hole, fast flow valve core
LARGE BORE OTR SPUDS
Top quality Large Bore OTR Spuds, tubeless and tube-type, come in the most popular configurations. STOCK NO. DESCRIPTION TR NO. UNITS/BOX VS977 Large Bore Spud, tubeless SP2 5 3022 Large Bore Spud, tube-type, SP4000 5 with bridge washer and hex nut 3024 Large Bore Spud, tubeless, for rims SP3 5 with 1/2” female NPT valve holes
253 TIRE VALVES AND HARDWARE
LARGE BORE AGRICULTURAL/OTR SINGLE BEND SWIVEL VALVES
Developed especially for front wheels and outside duals, and usable with 3020, 3022 and 3024 spuds, each unit comes complete with all necessary fittings, large bore valve core and fork-type valve cap. STOCK NO. DESCRIPTION TR NO. UNITS/BOX 3025 3 1/8” Long Large Bore Single Bend J650 1 Swivel Valve, 800 bend, 1 5/64” vertical height 3026 4 11/16” Long Bore Single Bend J651 1 Swivel Valve, 900 bend, 1 17/64” vertical height 3027 3 1/8” Long Large Bore Single Bend J654 1 Swivel Valve, 600 bend, 1 5/64” vertical height 3028 3 1/8” Long Large Bore Single Bend J655 1 Swivel Valve, 740 bend, 1 5/64” vertical height 3029 8 3/4” Long Large Bore Single Bend J660 1 Swivel Valve, 900 bend, 1 57/64” vertical height 3030 7 1/2” Long Large Bore Single Bend J4000-7 1/2 1 Swivel Valve, 900 bend, 1 5/64” vertical height 3031 9” Long Large Bore Single Bend J4000-9 1 Swivel Valve, 900 bend, 1 5/64” vertical height 3032 29 1/2” Long Large Bore Single Bend J4000-29 1/2 1 Swivel Valve, 900 bend, 1 5/64” vertical height 3033 2 1/2” Long Large Bore Single Bend J4000-2 1/2 1 Swivel Valve, 900 bend, 1 5/64” vertical height 3034 4 1/2” Long Large Bore Single Bend Swivel Valve, 900 bend, 1 5/64” vertical height J4000-4 1/2 1
VALVE CORES
High quality Valve Cores include standard Short Cores, Heat-Resistant Cores, Long Cores and Large Bore Cores. STOCK NO. DESCRIPTION TR NO. UNITS/BOX 100AA Short Valve Core C1 100 100HA Short Heat-Resistant Valve Core C1 100 3001 0.302” Large Bore Valve Core, 32-T C2 10
VALVE CAPS
An often overlooked way to keep tires properly inflated, we offer a wide-range of standard and large bore valve caps. STOCK NO. DESCRIPTION TR NO. UNITS/BOX 643 Fork-Type Standard Metal Cap VC2 100 655 Dome-Type Standard Metal Cap VC3 100 39 Dome-Type Standard Plastic Cap VC8 1000 658 Skirted Dome-Type Metal Cap VC3 100 632 Skirted Dome-Type Heat-Resistant Metal Cap VC3 100 8971 Fork-Type Large Bore Valve Cap VC6 10 8971H Hex Head Large Bore Valve Cap VC7 10
VALVE PULLERS
Specially-designed Valve Pullers for passenger and light truck applications. STOCK NO. DESCRIPTION 5407 Solid-Bar Pull-Through Valve Puller 5409 Big Yank Slip-On Valve Puller
254 TIRE SERVICE TOOLS AND GAUGES
VALVE SERVICING TOOLS
STOCK NO. DESCRIPTION 5209 4-in-1 Valve Repair Tool 8909 Cable-Type Valve Fishing Tool 449 Valve Spinner Wrench (screwdriver type)
VALVE CORE SERVICING TOOLS
STOCK NO. DESCRIPTION 3042 Standard & Large Bore Screwdriver-Style Valve Core Removal Tool 47-068 Quick Deflator Core Removal Tool 5406 Pencil-Type Core Removal Tool 188 Large Grip Cap/Core Removal Tool
PRESSURE GAUGES & INFLATORS AIR PRESSURE & TREAD DEPTH GAUGES
STOCK NO. DESCRIPTION 7213 Passenger/Light Truck Pressure Gauge: 10-50 psi low pressure, durable nylon indicator bar reads in one pound increments, high impact chrome body, complete with pocket clip and deflator pin 7215 Truck Pressure Gauge: 20-120 psi high pressure, durable nylon indicator bar reads in two pound increments, high impact chrome body, complete with pocket clip and deflator pin 7275/7285 Dual Head Truck Pressure Gauge: 10-120 psi high pressure, 6” extension on all- chrome body, durable nylon indicator bar reads in two pound increments, complete with metal ring 7230 Agricultural Pressure Gauge:5-45 psi for air/liquid ballast filled tires, durable nylon indicator bar reads in one pound increments, high impact chrome body, gauge specially designed to allow pumping out and oiling to prevent corrosion, complete with pocket clip 7278 Dual Head RV Pressure Gauge: 20-120 psi high pressure, durable nylon indicator bar reads in two pound increments, high impact chrome body, complete with pocket clip 5123 Tread Depth Gauge: durable all-chrome construction, wide base, reads 0” to 1” in 1/32” increments, complete with pocket clip IN-LINE TIRE INFLATORS
STOCK NO. DESCRIPTION 1504 In-Line Tire Inflator: easy-to-read three-sided brass indicator bar calibrated from 0 to 120 psi in two pound increments, convenient chuck and inflator valve for easy bleeding of over-inflated tires, complete with 36” safety hose with clip-on valve chuck
255
AIR LINE ACCESSORIES TRU-FLATE PRESSURE GAUGES & INFLATORS AIR CHUCKS
STOCK NO. DESCRIPTION UNITS/BOX 764 Ball Chuck: barb type, 1/4” fitting 10 6044 Ball Chuck: 1/4” female fitting 10 6293 Ball Chuck: clip-on type, not flow through (for direct air lines) 5 6293A Screw-in Air Chuck Clip 5 103753 Ball Chuck: clip-on type, flow through 5 (for tire changers & inflator gauges) 6999L Lock-on Dual Head Chuck 5 6999 Press-on Dual Head Chuck 5 7150 Grip-on Lock Type Chuck, not flow through (for direct air lines) 5
AIR TANKS, AIR HOSE & ACCESSORIES AIR LINE COUPLERS & NIPPLES
Cadmium-plated hardened steel air line couplers and nipples are designed for long service life. All couplers feature a positive locking, sliding sleeve to prevent accidental uncoupling. Tru-Flate, ARO, Lincoln and Milton types available.
STOCK NO. DESCRIPTION THREAD 13-124 1/4” Tru-Flate Male Coupler 1/4” 13-134 1/4” Tru-Flate Female Coupler 1/4” 13-136 1/4” Tru-Flate Female Ring Sleeve Coupler 1/4” 12-124 1/4” Tru-Flate Male Nipple 1/4” 12-134 1/4” Tru-Flate Female Nipple 1/4” 12-104 1/4” Tru-Flate .302-32 Female Nipple, with standard valve cap thread 1/4” 13-604 3/8” Tru-Flate Male Coupler 3/8” 13-612 3/8” Tru-Flate Female Coupler 3/8” 12-604 3/8” Tru-Flate Male Nipple 3/8” 12-612 3/8” Tru-Flate Female Nipple 3/8” 13-704 1/2” Tru-Flate Male Coupler 1/2” 13-712 1/2” Tru-Flate Female Coupler 1/2” 12-704 1/2” Tru-Flate Male Nipple 1/2” 12-712 1/2” Tru-Flate Female Nipple 1/2” 12-702 1/2” Tru-Flate Male Nipple, with 3/8” NPT 3/8” 13-324 1/4” ARO Male Coupler 1/4” 13-334 1/4” ARO Female Coupler 1/4” 12-324 1/4” ARO Male Nipple 1/4” 12-334 1/4” ARO Female Nipple 1/4” 13-424 1/4” Lincoln Male Coupler 1/4” 13-434 1/4” Lincoln Female Coupler 1/4” 12-424 1/4” Lincoln Male Nipple 1/4” 12-434 1/4” Lincoln Female Nipple 1/4” 13-224 1/4” Milton Male Coupler 1/4” 13-234 1/4” Milton Female Coupler 1/4” 12-224 1/4” Milton Male Nipple 1/4” 12-234 1/4” Milton Female Nipple 1/4”
256 AIR LINE ACCESSORIES
REINFORCED AIR HOSE
Two-ply heavy duty, non-kink Reinforced Air Hose can take the worst punishment: oil, grease, abra- sion and extreme temperatures. Built to handle pressures up to 250 psi. Length come complete with male pipe thread on both ends. STOCK NO. DESCRIPTION HOSE ID 38-25HD 25’ Reinforced Air Hose with 3/8” Male Ends 3/8” 38-50HD 50’ Reinforced Air Hose with 3/8” Male Ends 3/8” 12-25B 25’ Reinforced Air Hose with 1/2” Male Ends 1/2” 12-50B 50’ Reinforced Air Hose with 1/2” Male Ends 1/2”
PERMA COIL® RETRACTING AIR HOSE
Bright yellow coiled retracting air hose is extremely durable and resists damage from oil, chemicals and abrasion. Easy-to-see bright color helps eliminate accidents. All units include a brass 3600 swivel male connector. STOCK NO. DESCRIPTION TF23-403 25’ Perma Coil Air Hose, 1/4” TF23-404 50’ Perma Coil Air Hose, 1/4” TF23-413 25’ Perma Coil Air Hose, 3/8” TF23-414 50’ Perma Coil Air Hose, 3/8” Note: Air line regulators, filters, and water separators also available.
PNEUMATIC BEAD EXPANDERS
257 WHEEL ATTACHING PARTS AND TOOLS
TORQUE LIMITING SOCKETS
RECOMMENDED BY TIRE SERVICE PROFESSIONALS! We Stock #30174 Four Piece Starter Kit Six-Piece and Nine-Piece Starter Sets are available by Special Order. Individual Sockets are also available by Special Order.
WHEEL NUT AND STUD REMOVING KIT
For removing 13/16” Budd wheel inner cap nuts, 3/4” and 5/8” lug studs. Kit includes Drive-On Tool, 13/16” sq. 1 1/8” dia., 3/4”, and 5/8” Rib Nuts, and Drift Pin. PART # DESCRIPTION 5205 Triple Duty Kit
REPLACEMENT RIB NUTS
Order as required. PART # DESCRIPTION 5206 1 1/8” dia. (13/16” square head) Rib Nut 5207 3/4” Rib Nut 5208 5/8” Rib Nut
WHEEL GUARD
• Protect Steel and Aluminum Wheels • Prevent Corrosion
Wheel Guard is a black nylon separator plate approximately 1/32” thick that is placed between the hub and the wheel or between dual wheels. We recommend the wheel guard be used to prevent corrosion and wear between surfaces. Use with both steel and aluminum wheels. MFR. NO. APPLICATION DIAMETER STUD 5901 10 HOLE 11 1/4” bolt circle 1 1/8” and 7/8” 5902 10 HOLE 285.75 mm bolt circle 3/4” 7902 8 HOLE 275 mm bolt circle 20 mm 5/8” AND 3/4” STUD SETTERS
Simply thread STUD SETTER on. Use impact or 4-way wrench to install stud. ORDER NO. DESCRIPTION 5833 5/8” Wheel Stud Setter - uses 1 1/8” hex socket 5834 3/4” Wheel Stud Setter - uses 1 1/4” hex socket
258 TOOLS & EQUIPMENT
TRUCK TIRE HAMMERS
HAMMER WITH FIBERGLASS HANDLE. MFR. NO. OVERALL LENGTH TG-11 35429 32” TG-11EH 35229 32” Rpl. Handle
HAMMER WITH WOOD HANDLE MFR. NO. OVERALL LENGTH T-11E 35329 30” T-11EH 35129 30” Rpl. Handle *Other sizes & replacement handles available DOUBLE END TRUCK WRENCHES
STANDARD MFR. NO. SOCKET SIZES TR1 32501 1 1/8”, 13/16”, sq. TR98 32508 1 1/2”, 13/16” sq. TR2 32502 1”, 1 1/4”, 5/8” sq. TR9 32509 1 1/4”, 1 1/16”
TRUCK WRENCH HANDLE Handle is extra long for increased leverage and heat treated for extra strength MFR. NO. LENGTH HEX TR-5 32318 22” 3/4” 4-WAY WRENCHES
PASSENGER CAR MFR. NO. LENGTH Socket sizes: 3/4”, 13/16”, 7/8”, 15/16” T-57 35657 23”
LIGHT TRUCK MFR. NO. LENGTH Socket sizes: 7/8”, 15/16”, 1”, 1 1/16” T-90 35690 25”
HEAVY DUTY TRUCK FOUR-WAY MFR. NO. LENGTH Socket sizes: 1 1/16”, 1 1/4”, 1 1/2”, 13/16” sq. T-95 35695 27 1/2” *Other sizes available TUBELESS TIRE TOOLS
Designed for mounting and demounting tubeless tires. Hand forged chrome nickel steel. Use in pairs. MFR. NO. LENGTH T-45A 34645 37”
HEAVY DUTY TUBELESS TRUCK IRON Stock is 7/8” for extra strength, length is 41” for extra leverage. Use in pairs. MFR. NO. LENGTH T-45 HD 34647 41”
259 TOOLS & EQUIPMENT
MOUNT/DEMOUNT TIRE SPOONS
STRAIGHT SPOON TIRE IRONS MFR. NO. LENGTH DIA. T-19 32119 24” 11/16” T-19A 33219 30” 11/16” T-38 33238 30” 7/8”
CURVED SPOON TIRE IRONS MFR. NO. LENGTH DIA. T-2X 32102 18” 11/16” T-20A 33220 30” 11/16” T-39 33239 30” 7/8”
TRUCK LOCK RING REMOVERS
Designed especially for Firestone RH and TI rims. MFR. NO. LENGTH DIA. T-23 32123 24” 11/16”
Designed especially for Firestone RH and RI rims T-23A 33223 30” 11/16”
Combination ring tool T-23B with flat tapered end. Ideal for all around ring and rim work. MFR. NO. LENGTH DIA. T-23B 33224 23 1/2” 11/16”
Combination ring remover. Curved end is shaped to remove full circle lock rings. Avoids distorting rings. MFR. NO. LENGTH DIA. T-22 32122 18” 5/8”
For servicing 5o wide base rims. MFR. NO. LENGTH DIA. T-25 32125 18” 5/8”
For removal of continuous side rings on two piece truck rims MFR. NO LENGTH DIA. T-27A 32128 18” 5/8”
Aids in removing and replacing lock rings on all Budd, Ford, Chevrolet, and GMC wheels. MFR. NO. LENGTH DIA. T-48A 34648 37” 3/4”
BUDD NUT WRENCHES
Holds outer cap nut while turning inner nut on Budd and Ford wheels. MFR. NO. SIZE TX-9 30609 1 1/2” and 38mm TX-10 30610 35mm TX-12 30612 41mm
260 GARAGE EQUIPMENT STUDS AND STUDDING EQUIPMENT
TIRE STUDS
Steel Jacket Precision made tire studs with carbide traction pins encased in a wear resistant jack. The hole design of the jacket together with the tapered carbide pin help maintain a consistent pin protrusion for the life of the tire. Sold in boxes of 1,000. ORDER NO DESCRIPTION HOLE DEPTH INCHES 12 #12 Tire Studs 12/32 13 #13 Tire Studs 13/32 15 #15 Tire Studs 15/32 16 #16 Tire Studs 16/32 17 #17 Tire Studs 17/32 MODEL K-5 STAND
Ideal for Busy Shops Includes: shelf for stud package, gun holder and support for tire stud feeder. Welded steel construction and stable T-shape support. Base dimensions: 21”x 27”, 5’2” Height. ORDER NO. DESCRIPTION K5 K-5 Stud Stand
Gun and Stud Feeder Not Included
STUD FEEDER
Fully Automatic Feeding Electric Motor A fully automatic, fast loading feeder that provides positive stud orientation. Fewer moving parts for continuous service, minimum maintenance. Feeds up to 225 studs per minute. Handles (TSMI) sizes #12, #13, #15, #16 and #17. 110 V, 60 cycle. ORDER NO MFR. NO DESCRIPTION KFP2 KFP2-1 Stud Feeder MODEL 10 STUD GUN
For Automatic Feeding Equipped for automatic feeding of studs to gun. Positive center feed eliminates wrong positioning of studs. Handles stud sizes (TSMI) 10 thru 17. Studs installed straight. Easy maintenance- no tools needed. No “push rod” yet fingers are automatically ejected from hole. ORDER NO. DESCRIPTION 10 Model 10 Stud Gun REPAIR KIT FOR #10 STUD GUN AND REBUILD KIT FOR #10 STUD GUN
MFR. NO. DESCRIPTION 0382 Repair Kit for #10 Stud Gun
REBUILD KIT MFR. NO. DESCRIPTION 0385 Rebuild Kit for #10 Stud Gun
FEEDER BOY
Holds Up to 100 Studs Inexpensive and fast method for feeding studs automatically to Model 10 gun. Lift off cap and load with up to 100 studs. Snap onto base and rotate by hand to release studs into gun chamber. Lightweight rugged plastic construction. Gun not included. ORDER NO. DESCRIPTION 4048 Stud Feeder boy
261 GARAGE EQUIPMENT
TIRE AND WHEEL EQUIPMENT
CHROME NUT COVER REMOVER
Removes and installs chrome wheel nut covers without scratching or damage. Adjustable. Formed steel jaws with Non-Mar protective coating. ORDER NO. DESCRIPTION N88-1101 Chrome Nut Remover
BOLT HOLE CHAMFER WEAR GAUGE
Visually detects excessive wear in .875R spherical chamfers of bolt holes in disc wheels. Designed for use with stud piloted dual steel wheels with .875R spherical chamfered bolt holes 3/8” to 1/2” disc thickness. ORDER NO. DESCRIPTION FS5905 Bolt hole Chamfer Wear Gauge
MARKAL® PAINTSTIK®
Permanent Paint Permanent, waterproof and fadeproof. Marks on wet tires or tires covered with mold lubricant. Withstands vulcanizing and retreading temperatures. Also marks on wood, plastic, glass, etc. Nontoxic, contains no lead. Sold 12 per box. MFR. NO. COLOR MHKPS White
EQUAL TIRE BALANCING FORMULA
Continuous Balance... Every Tire, Every Wheel Position, Every Time! No More Vibration & Uneven Treadwear Equal is a revolutionary dry balancing formula that provides a continous balance to the tire and wheel assembly. Fast and easy to install on or off the vehicle. Ideal for all types of truck tire and wheel assemblies, aluminum or steel, disc or spoke, tube and tubeless. Especially effective for difficult to bal- ance aluminum rims. ORDER NO. FOR TIRE SIZE USE PACKAGE SIZE A12 1200 R22.5 A B10 10.00 R20-275/80 R24.5 B C8 900 R20- 245/75 R22.5 C D6 800 R19.5-245/70 R19. D E4 800 R17.5-225/75 R17.5 E F2 215/85 R16-9.50-R16.5 F For best results, use a valve stem filter extension when using Equal. Install Equall through the valve stem. Recommended Accessories DESCRIPTION Portable Applicator Valve Stem Filter- Nickel Plated Valve Stem Filter- Brass
AUTO & LIGHT TRUCK BOLT PATTERN GAUGE
Easily identify rim sizes. Gauge fits over disc or drum studs to accurately measure bolt patterns. Mag wheels are measureed by fitting the gauge into 2 lug holes. To measure wheels with conical holes use the 2 conical adapters. Kit includes 4 and 5 lug hole gauges. PART # DESCRIPTION 2002 Wheel Gauge
262 GARAGE EQUIPMENT
TIRE MOUNTING EQUIPMENT AND LUBRICANTS
THE BEAD SEATER
• Set Tubeless Beads Instantly- Every Time! • Eliminate Personal Injuries Use No Ether Use No Tire Grease Use No Tire Compressor Bands A SAFE AND EASY TIRE INFLATING DEVICE. COULD PAY FOR ITSELF IN 24 HOURS! • Completely Portable- weighs only 25 lbs. • Carry in one hand- Road & Shop use • If your man can turn a key, then he can now seat a Bead Instantly • Set all tires from the smallest car up to 17.5x25 • Golf Cart Tires • Race Car Tires MURPHY’S TIRE & TUBE COMPOUND
For Mounting Tube & Tubeless Tires Rust Inhibitor Economical and long lasting 8 lb. pail makes 5 gallons when mixed with water. Also available premixed as liquid. Can also be used for lubricating rubber mounted spring shackles, bushings, fan belts, and other rubber fittings. PART NO. SIZE PAIL PER CASE 2000 8 Lbs. 4 2005 25 Lbs. 1 2010 40 Lbs. 1 Liquid MURPHY’S 2020 1 Gal. 4 2023 5 Gal. 2 2055 55 Gal. 1 000491 Lube Swab 1
FREYLUBE
Bead Lubricant Rust Inhibitor Prevents corrosion caused by electrolysis as well as conventional rust. Reduces replacement expenses for flaps on conventional tires. PART NO. SIZE PAIL PER CASE FRY5 4 1/2 lb. Can 4 FRY25 25 lb. Can 1
263 GREASE AND GREASE EQUIPMENT
HEAVY DUTY DISC BRAKE WHEEL BEARING GREASE
The highest quality multi-purpose grease due to a lithium complex base providing for greater heat and water resistance. Operating temperature range of -10o to 350oF. Fortified with additives to resist rust, oxidation, extreme pressure and wear. Excellent water resistance. Designed for boat trailers, disc brake wheel bearings and more. NLGI Grade 2. PART NO. DESCRIPTION 30-141 3 oz. cartridge, 3 per display bag 3160 14 oz. cartridge 3161 1 lb. (16 oz.) can
MARINE AND TRAILER WHEEL BEARING GREASE
A high quality lithium based, multi purpose grease that performs well under a temperature range of 0o to 290oF. Highly water insoluble and washout resistant. Fully fortified with additives to protect against rust, oxidation, extreme pressure, and wear. A recommended leader for medium slow to medium high speed bearings and greased chassis points. NLGI Grade 1 1/2. USDA H2. PART NO. DESCRIPTION 3121 1 lb. (16 oz.) can 3184 3 oz. cartridge, 3 per display bag 3120 14 oz. cartridge
MULTI-PURPOSE GREASE
A lithium base grease that performs well under a temperature range of 0o to 265oF. Water insoluble. Use in most automotive, agricultural and industrial applications including chassis and other grease lubricated bearings. A grease for normal temp/speed conditions and job requiring frequent regreasing because of contaminating environment. NLGI Grade 2. PART NO. DESCRIPTION 30-124 14 oz. cartridge
GREASE GUNS
1142 Lisle Brand Professional Lever Action Grease Gun Our heavy-duty grease gun for automotive professionals. Variable/short stroke for easy use in confined areas.
1134 Lisle Brand Professional Pistol Grip Action Grease Gun Our heavy-duty grease gun for automotive professionals. Pistol grip action for one-hand operation.
264 PROFESSIONAL LIGHTING AND CORD PRODUCTS
ROUGH DUTY FLUORESCENT/SPOT WORK LIGHT - PROFESSIONAL SERIES
• The Industry Standard • SL-907 (6Ft cord). • SL-935 (25Ft cord). • SL-936 (50Ft cord).
LAMP HANDLE CORD BULB PLUG/ CS CS OUTLET QTY WT High Impact Yellow Flame Retardant 16/3 Uses 13 Watt Polarized Plug SL-907 6 9lbs. Lamp Protector Polypropylene SJEO 10,000 Hr. Rated with 12 AMP SL-935 6 14 lbs. with High Gloss 6500 Kelvin Grounded SL-936 4 19 lbs. Reflector (included) Receptacle
Pro Mechanics choice. Impact resistant fluorescent work light with chemical and UV resistant lamp protector. Custom high gloss reflector and clear polycarbonate top for spot-lighting. Convenient dou- ble hang hook allows hanging or standing. Unique nylon tips for scratch resistance and extra grip. Polypropylene handle and convenient rocker on/off switch. 6ft, 25ft or 50ft 16/3 SJT cord. 12 AMP grounded receptacle. Cool running 13 wall 10,000 hour rated 6500k fluorescent bulb (included).
UTILITY LIGHT ON 50FT RETRACTABLE REEL - PROFESSIONAL SERIES
• SL-851 (50Ft cord).
LAMP HANDLE CORD BULB CS QTY CS WT Galvanized Heavy Duty Metal 18/3 Up to 75 Watt 4 17 lbs. Metal Lamp Retractable Reel with SVT Incandescent Shield with Black Flame Retardant (not included) Hang Hook Polypropylene Handle
Heavy duty metal retractable reel and utility light with reflective galvanized metal lamp shield, hang hook, black polypropylene handle, and durable push on/off switch. 50ft 18/3 SVT cord. Uses up to 75 watt incandescent bulb (not included).
ROUGH DUTY FLUORESCENT WORK LIGHT ON 40FT METAL REEL - PROFESSIONAL SERIES
• SL-825 (40Ft cord).
LAMP REEL CORD BULB PLUG/ CS CS OUTLET QTY WT High Impact Lamp Heavy Duty 16/3 13 Watt Polarized Plug 4 44 lbs. Protector with Metal Retractable SJT 10,000 Hour with 10 AMP High Gloss Rated 6500 Kelvin Grounded Reflector (included) Receptacle
Heavy duty metal retractable reel and fluorescent work light with clear chemical resistant lamp pro- tector, high gloss reflector, yellow polypropylene handle, and durable push on/off switch. Nylon tipped double hang hook or convenient magnetic clamp. 40ft 16/3 SJT cord with polarized plug and 10 AMP grounded receptacle. Cool running 13 wall 10,000 hour rated 6500k fluorescent bulb (included).
265
LIGHTING AND CORDS • WIPER BLADES
500 WATT HALOGEN PROJECT WORK LIGHT
• SL-1002 UPC# 0 17398 21002 (3Ft cord).
LAMP HANDLE CORD BULB PLUG CS CS QTY WT Tempered Glass Lens Foam Grip 18/3 500 Watt Polarized Plug 6 31 lbs. with Metal Safety “S” Type SJTW Halogen Grill with a spare
Portable 500 watt halogen work light with foam grip “S” type handle. Tempered glass lens with metal safety grill and power coat finish. 3ft 18/3 SJTW all weather cord with molded plug. 500 watt halo- gen bulb with a spare bulb in a protective bulb holder (included).
CONTRACTOR GRADE - SINGLE TAP
MODEL CORD LENGTH CORD RATING CS QTY UPC SL-725 25ft 16/3 SJTWA 13A 18 0 17398 10128 8 SL-750 50ft 16/3 SJTWA 13A 12 0 17398 10129 5 SL-751 100ft 16/3 SJTWA 10A 6 0 17398 10164 6 SL-752 25ft 14/3 SJTWA 15A 12 0 17398 10191 2 SL-753 50ft 14/3 SJTWA 15A 6 0 17398 10192 9 SL-754 100ft 14/3 SJTWA 13A 6 0 17398 10193 6 SL-757 25ft 12/3 SJTWA 15A 4 0 17398 10194 3 SL-758 50ft 12/3 SJTWA 15A 2 0 17398 10195 0 SL-759 100ft 12/3 SJTWA 15A 2 0 17398 10196 7
SAVER WIPER BLADES
VISION SAVER
CALL FOR APPLICATIONS
266 LUBRICANTS, CLEANERS, AND INHIBITORS
LPS® 1 GREASELESS LUBRICANT
• Resists Oil & Dust Buildup • Cleans & Displaces Moisture • Fast-acting Penetrant • Ideal for Electrical/Electronic Components and for • Contains No CFCs Delicate Mechanisms PART NO. DESCRIPTION 00116 11 oz. 01128 1 gal. LPS® 2 INDUSTRIAL-STRENGTH LUBRICANT
• Non-drying Oily Film • Long Lasting Lubrication • Loosens Rusted & Frozen Parts • Multi-purpose Lubricant, Penetrant, Protectant • Nonflammable Propellant • Contains no CFCs PART NO. DESCRIPTION 00216 11 oz. 02128 1 gal. LPS® 3 HEAVY-DUTY RUST INHIBITOR
• Transparent, Soft Waxy Film • Stops Rust & Corrosion • Protects Up to 2 Years • Non-slinging Heavy Duty Lubricant • Contains No CFCs PART NO. DESCRIPTION 00316 11 oz. 03128 1 gal. LPS® PRESOLVE® CLEANER/DEGREASER
• 1,1,1 Replacement Alternative • Natural-based Solvent • Cleans & Degreases on Contact • Controlled Evaporation for Deep Cleaning • No Rinsing, No Residue Penetration • Contains No CFCs PART NO. DESCRIPTION 01420 15 oz. LPS® HEAVY-DUTY SILICONE LUBRICANT
• 5% Silicone • Lubricates and Protects • Water Based • Safe on Most Surfaces • Contains no CFCs or Chlorinated Solvents PART NO. DESCRIPTION 40003 13 oz.
LPS® COLD GALVANIZE
• 95% Pure Zinc • Works as a Primer • Works on Rusted Surfaces and All Metals • Contains No CFCs or 1,1,1 Trichloroethane PART NO. DESCRIPTION 00516 16 oz.
LPS® ELECTRO CONTACT CLEANER
• Cleans, Degreases Delicate Mechanisms • Quick Penetration and Evaporation • No Rinsing, No Residue • Nonconductive, Nonflammable • Safe on Most Surfaces PART NO. DESCRIPTION LPS 00416 16 oz.
267 CLEANERS AND CAR CARE PRODUCTS
CAR CLEANING PRODUCTS MORE SHINE LESS TIME™
More Shine Less Time is not a messy fam or drippy liquid. This long lasting spray-on coating makes dull, faded tires look brand new in seconds. Just spray and walk away. Other brands don’t last because they’re made with water and surfactants (soaps) that evaporate and wash off easily with water. More Shine Less Time contains NO surfactants or water so it lasts longer. Selected “Best Tire Product” by Corvette Fever magazine. • 12 oz. Aerosol, 12 cans per case. • Item No. 91044
“More Shine Less Time for tires makes tires shine without that greasy look. And the goop that spins nto the wheels and inner fenders is thankfully missing. R.B., San Jose, CA
TRIM SHINE®
The protectant professions use. Trim Shine brightens and protects bumpers, running boards, trim, dashboards, vents, hoses, door gaskets, and more. Just spray and walk away. Won’t run, drip, or streak. No rags, dirty hands, or waste. • 12 ox. Aerosol, 12 cans per case. • Item No. 91034
“I was given a can of Stoner Trip Shine by my Ford Dealer. Your product is incredible. Trim Shine blows away Armor All and that 2000 stuff.” D.N., Centerville, VA
SPEED BEAD®
Speed Bead lets you wax in minutes, not hours. Cleans, polishes, and waxes in one easy step. Removes oxidized paint, light scratches, and environmental damage. Contains a proprietary blend of cleaners, waxes, and synthetic micropolymers. Safe for clear coat finishes. • 15 oz aerosol, 12 cans per case • Item No. 91354
“Speed Bead is the best wax n the world. Wow, is that stuff great! Other race team come over to our paddock area to bowwow Stoner products.” Scott Bove, Owner/Driver Team Tech Racing, Porsche GT3 Cup World Challenge
BEAD MAX®
Bead max chemically bonds to your finish giving your maximum surface protection, water beading, and shine. It contains no cleaners or abrasives. • 15 oz. Aerosol, 12 cans per case. • Item No. 91384.
“I have used ZymÔl, and most mass market waxes. I have even used products most people don’t know about. Bead max is the best by far. J.T., Stockton, CA
“Bead max is very fast to use and much more efficient than any other wax. It made he pain look like it came directly off of the showroom floor.” A.G., Strasburg, PA
268 CLEANERS AND CAR CARE PRODUCTS
CAR CLEANING PRODUCTS INVISIBLE GLASS®
Cleans windows and mirrors so well, you’ll think they’re invisible. Other cleaners use water and foamy soaps and surfactants. These low cost ingredients remove basic dirt, but leave streaky residues. Invisible Glass contains NO soaps, surfactants, or foams so you get maximum clarity. Safe for tinted windows. • 19 oz. aerosol, 12 cans per case. • Item No. 91164
“It really works? Many brands claimed to be streak free but none were until I tried Invisible Glass.” M.G. Warren, PA
“I applied Invisible Glass to my award winning Corvette aand the glass almost disappeared. My Corvette went on to win the grand championship, beating out all year Corvettes.” D.H., Woburn, MA
TARMINATOR®
Finally, a tar and sap remover that works! Used by a leading German luxury sedan manufacturer to clean and prep cars after transit from Europe. Cleans painted surfaces in preparation for wax- ing. Clearcoat safe. • 14 oz aerosol, 12 cans per case. • Item No. 91154
“I’ve just thrown away near full cans of your competitors’ sap and tar removers. The difference between Tarminator and the others is simple, their don’t work. “ M.B. Los Angeles, CA
UPHOLSTERY AND CARPET CLEANER
Removes water-soluble dirt and stains such as coffee, food, candy, smudged dirt, and grime. Dries fast and won’t leave surfaces saturated and wet • 18 oz aerosol, 12 cans per case • Item No. 91144
“Stoner Carpet Cleaner is excellent! I tried it first on a chocolate stain on my minivan upholstery and it came out right away.” P.B. Nashua, NH
XENIT® CLEANER/REMOVER
The fastest way to remove greasy dirt and “sticky stuff.” You won’t find a better way to remove adhesives, decals, gum, lipstick, and tar from carpeting, glass, chrome, metals, and moare. • 10 oz. aerosol, 12 cans per case. • Item No. 94213
“XENIT is the only product that will remove a rubber doughnut from the side of our race cars after running speedways like Daytona or Talladega.” Tony Barnes, Shop Foreman, ML Motorosports Jason Jarett crew, ARCA Series
Call for information on additional Stoner Products.
269
PROFESSIONAL LANDSCAPEL TRAILER ACCESSORIES
WE STOCK TARPS TOO! - SEE PAGE 271
LT25 Water Cooler Rack
LT10 Lockable Trimmer Rack LT32 Locking Gas Can Rack
LT15 Multi-Rack
LT12 Trimmer Rack
LT22 Backpack Blower Rack
LT13 Lockable Trimmer Rack
LT30 Gas Can Rack
LT37 Hand Tool Rack
LT20 Backpack Blower Rack
LT35 Hand Tool Rack
270 TRUCK SAFETY • TRUCK TARPS
EMERGENCY TRIANGLE SAFETY WARNING KITS
449 Warning Triangle Kit
1015 James King Kit Warning Triangle Kit W/Flares and Fire Extinguisher
TRUCK TARPS
Part Number Description 3500 6’ x 12’ Black Mesh Tarp 3598 7’ x 12’ Black Mesh Tarp 3599 7’ x 14’ Black Mesh Tarp 3600 7’ x 16’ Black Mesh Tarp 397 7’-6” x 16’ Asphalt Lumite Tarp
TARP SYSTEMS
271 1215200
1430200 1440200 12VDC w/Roller Fairlead 12VDC w/Roller Fairlead
1450200 12VDC w/Roller Fairlead
272
MOTORCYCLE CHOCKS AND ACCESSORIES
MOTORCYCLE PRODUCTS TUBULAR CHOCK
Part# T101-2003 • 1” 304 Stainless Steel Construction • One Man Installation / Top Side • Quick Release • Wood Floor Installation Hardware Included
Experience The Difference... - No Rust Stainless Steel - Thick Wall Heavy Duty - Larger Diameter than Competitors - Shipped On Time / Every Time - Call For Details
Proven Unique Fastener System Part# Z101-0010 (Additional Hardware (4))
RECESSED CHOCK
Available in 24” and 16” Lengths Black Powder Coated
Part # Description T436-1634B 16” Recessed T436-2400B 24” Recessed
• Flush Mount • Heavy Duty Steel Pan & Lid • Tie Down Strap Storage • Installation Hardware Included
HELMET AND ACCESSORY RACK • 1 1/4” 304 Stainless Steel Construction • Easy Flange Mount • Arrives Fully Assembled for Easy Installation • Style Similar to Pit Stop Wheel Chock • Designed to Strap and Restrain Helmets and Accessories • Restraint Bars Hug Riding Apparel Nicely
Part # Length T101-2400 24” T101-3200 32” T101-4800 48”
273 LIFTGATE PARTS
LIFTGATE REPLACEMENT PARTS We Stock These & Much More!
DRAIN PARTS SOLENOIDS SWITCHES
APL 2250 APL 3365 APL 3000 This common dimmer style start switch offers Heavy duty drain solenoid kit comes 3-post, positive to excite, metal ground- quality, reliability and value all in one. complete with solenoid, bracket, cap and ed solenoid with flat base. Use for most stem hardware. all liftgate makes and models.
AMF 3330 APL 3020 BPL 2250 Complete solenoid drain valve with car- Another great replacement option, this Order this canister switch for service and tridge replaces Maxon 250072 and bakelite upright solenoid is built to replacement of many Monarch and Theiman Leyman. Used on most SPX (Fenner) Prestolite standards. 3-post, positive, items. Features screw-type mount. electric power units. grounded with curved base. NEED PARTS FOR THAT OLD LIFTGATE? NOW WE HAVE EM!
MOTORS
BMT 0022 AMT 0077 AMT 0097 A very popular regular duty tang shaft Regular dutyCW replacement motor Built to Prestolite specifications and liftgate motor! This CCW, 12-Volt, DC, with spline shaft. An exact replacement affodably priced. Regular duty motor OEM motor is found on Waltco, MAxon for the Prestolite MDY7039. Also use for replaces Waltco, Maxon, Anthony, Monarch and MTE. Maxon, Waltco and Venco replace- Venco, DelAmerica, Tommy and SPX ments. (Fenner) products.
POWER UNITS APP 0100 Replace that worn out pump with this OEM manual power pack. Features OE punp and motor, 3-qt. reser- voir and regular duty motor.
APP 0250 Drop-in replacement for MAxon 250100 power unit. Pressure set to 2500 psi, adjustable. Prestolite sole- noid with 2 wires for drain solenoid and a 12” L reservoir with breather. Includes extra port for return line.
274
LIFTGATE PARTS
LIFTGATE PEPLACEMENT PARTS - WIRE AND BATTERY PRODUCTS
MASTER DISCONNECT SWITCH APL 9653 6-36 Volt. 180 Amps continuous capacity - 1,000 amps rush. S.P.S.T. (off-on). Two stud terminals 3/8” copper. 4-1/8 long by 2-5/8” diameter. Conforms to UL 558. WIth face plate.
CIRCUIT BREAKERS APL 9005 50 Amp Circuit Breaker APL 9009 90 Amp Circuit Breaker APL 9012 120 Amp Circuit Breaker APL 9015 150 Amp Circuit Breaker
Same mounting holes as APL 8012. SLightly smaller overall. Same trip characteristics.
TRAILER DISCONNECT PLUG BPL 2600 Trailer disconnect plug. BPL 2601 Socket only. BPL 2602 Male Plug only Single pole connector. Up to 1/0 cables. Hot, 2 gauge ground. Brass contracts. Mount through 2” diameter hole. Internal ground return terminal. 300 amps continuous.
TOW CONDUCTOR TRAILER DISCONNECT PLUG Dual pole, rated 200 amps for 6 gauge wire. BPL 2610 Plug and Socket. BPL 2611 Socket only. BPL 2612 Male plug only.
BATTERY CABLES Do that installation right! If you want to add products to what you’ve already bought, check our pricing before you buy the competition.
ELW 5000 1/0 gauge, SGT, black jacket, copper wire, 133 strand.
ELW 5004 4 gauge, SGT, red jacket, copper wire, 63 strand.
ELW 3042 Dual pole change line Bonded 4 gauge copper rated. 200 amps
ELECTRICAL COMPONENTS ACCESSORIES
DELUXE TERMINAL ASSORTMENT Make sure you have the correct teminal for the job 240 pieces. EPR 5099
Keeps those connecotrs watertight and seals connections for longevity. Heat shrinkable polyolefin shrinks to 1/2 of original size
SHRINK TUBING Waterproof polyolefin spool. Shrink ratio 2 to 1. EPR 4008 4’ x 1/8” EPR 4016 4’ x 3/16” EPR 4025 4’ x 1/4” EPR 4038 4’ x 3/8” EPR 4050 4’ x 1/2” EPR 4100 4’ x 1”
Heavy wall with adhesive. Superior strain relief. SHrink ratio 3 to 1. Preshrunk ID EPR 4238 3/8” EPR 4275 3/4” EPR 4210 1” 275 AUTOMOTIVE SERVICE PRODUCTS
# SNOBRUM Telescoping Aluminum Handle # SNOWBRUM -1 Gen II Wooden Handle
PORTABLE BATTERY JUMP PACKS
ALLSTART ALLSTART-SPORT 12Volt Portable Jump Starter 12Volt Portable Jump Starter Ultra-Reflectiver labeling 115 Volts AC - 300 Watts Power 29 foot, 6 gauge cables Deep Cycle 24 Hr Battery Adjustable Emergency Light Adjustable Emergency Light Display Packaged for Resale Display Packaged for Resale
AMPG-108 “MARINA” Marina 12Volt Portable Jump Starter APSOP-106 “PRO-ONE” Heavy Duty High Output Battery Built Tough for Professional Use 4 foot, 4 gauge cables 12Volt Portable Jump Starter Adjustable Emergency Light 4 Foot 4 Gauge Cables 12 Volt DC Power Source Adjustable Emergency Light 115 Volts AC Power Source Display Packaged for Resale DC Charging Cord Included Display Packaged for Resale
AMJ-401 “MINI-JUMPER” ALLSTART-CORD Mini 12Volt Portable Jump Starter 12Volt Charging Cord Hi-Brite 10 Watt Halogen Spotlight User Safe Battery Clamps High Output 12 amp hr. Battery Adapter Storage Great for Cell Phones, 12V Car Vac. ALSO AVAILABLE 12V Spotlights, Air Compressors, 12V Fans, 12V TV’s, Portable Radios. Standard 12 Volt Portable Jump Starter ARJ-104 and Much More! WPG-103 “Winchester” 12 Volt Portable Jump Starter with power inverter Display Packaged for Resale
276 AUTOMOTIVE SERVICE PRODUCTS
R134A FREON CHARGING TOOL FAST, EASY, ACCURATE RECHARGING.
Easy to read color-coded gauge for an accurate system fill
Easy reach with 8-inch of charging hose to reach all low-side ports
Easy one-hand operation. Squeeze trigger to fill, release to measure
Sturdy metal coupler attaches & detaches with ease.
# QC-1CS
R134A FREON REFRIGERANT
R134A REFRIGERANT
30 lb. Containers Bulk Discounts Available Call Us Today for a Quote
INTAKE CLEANING KITS
3M Intake System Cleaner Kit This is the most complete package of intake system cleaning chemicals available. This 3-pack is designed with the professional user in mind, providing the cleaning agents to go through the upper intake and in the tank, while including an aerosol product to clean the throttle plate and air intake on fuel-injected gasoline engines.
# 08962 3M Intake System Aerosol Adaptor Kit
Equipped with an assembled tube attached to a brass quick disconnect fitting (08927) for attachment to the 3M Intake System Cleaner 08958. The kit also includes a can hanger (08837) and a complete set of instructions # 08960 277 AUTOMOTIVE SERVICE PRODUCTS
3M THROTTLE PLATE AND CARB CLEANER #08866 8.5 OZ NET WT
Unique, low VOC aerosol product designed to dissolve the deposits that are normally found on the throttle plate in fuel injected cars. It both cleans and lubricates, while restoring performance
3M SILICONE PASTE #08946 8 OZ NET WT
A non-melting, water resistant, 100% solids, silicone compound designed to protect surfaces from oxidation. Also used as a general purpose lubricant for brakes (metal to rubber applications); great for O rings and weatherstripping.
3M WINDOW-WELD ROUND RIBBON SEALER #08610 1/4 IN X 15 FT KIT
Contains one roll of sealer and setting blocks. Its unique feature of controlled compressability allows easy installation yet will not squeeze out or allow lite to contact pinchweld. Sufficient material to replace one windshield or backlite
SCOTCH-BRITE ROLOC SURFACE CONDITIONING DISC #07480 2 IN, COARSE, 25 DISCS PER BOX
Offers ease of disc centering and is used in conjunction with 3M Roloc Disc Pad Assembly 05539
SCOTCH-BRITE ROLOC SURFACE CONDITIONING DISC #07485 3 IN, COARSE, 25 DISCS PER BOX
Offers ease of disc centering and is used in conjunction with 3M Roloc Disc Pad Assembly 05540
3M HEAT SHRINK TUBING
REFILL PACKS #36618, 3/32 IN X 6 IN, 10 PACKS PER CASE REFILL PACKS #36619, 1/8 IN X 6 IN, 10 PACKS PER CASE REFILL PACKS #36620, 3/16 IN X 6 IN, 10 PACKS PER CASE REFILL PACKS #36621, 1/4 IN X 6 IN, 10 PACKS PER CASE
Flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of applications. Assortment contains 3 each of the 7 colors.
278 278 AUTOMOTIVE SERVICE PRODUCTS
3M AUTOMOTIVE ATTACHMENT TAPE, #06377 GRAY, 1/2 IN X 20 YDS, 30 MIL
Unique, low VOC aerosol product designed to dissolve the deposits that are normally found on the throttle plate in fuel injected cars. It both cleans and lubricates, while restoring performance
SCOTCH FILAMENT TAPE #06894 18 MM X 55 M
Excellent for bundling elongated metal and wood parts and for sealing and reinforcing cartons containing heavy items for shipment. Strong - High performance - Adheres instantly. Tensile strength is 380 lbs./inch
SCOTCH PERFORMANCE MASKING TAPE #26340 GREEN, 8 MM X 55 M
Highly conformable, provides the best adhesive transfer resistance, hugs curves, contours and provides outstanding paint lines. Goes on quickly and easily, sticks at a touch and stays put. Perfectly balanced to give outstanding masking results.
TARTAN VINYL ELECTRICAL TAPE #49656 3/4 IN X 60 FT
General purpose electrical insulating tape. Economical and durable with excellent resistance to a wide range of contaminants and weather conditions.
POST-IT LABELING TAPE #06950 3/4 IN X 36 YDS
General purpose removable marking tape which can be used for labeling bin and shelf marking, package identification and correction and coverup work. Sticks firmly yet removes easily.
SCOTCH PREMIUM HEAVY DUTY PACKAGING TAPE CLEAR #39523, 48 MM X 50 M TAN #39524, 48 MM X 50 M
This reusable dispenser makes it extremely convenient to use in a variety of locations without making an investment in extra dispensers
3M DUCT TAPE SILVER #06969 48 MM X 54.8 M
A general purpose cloth duct tape designed for non-critical applications such as sealing, bundling, holding, and various miscellaneous applications
279 AUTOMOTIVE SERVICE PRODUCTS
PERMATEX FAST CURE EPOXY #21425
Convenient premeasured 10 - 4 g mixer cups in packed can epoxy mixer cups. No mess, no guess, no waste. Ideal for bonding glass, hard plastics, rubber and metal. Bonds in 5-15 minutes. Grey adhesive has excellent chemical resistance. Fills porosities and can be used to build up worn parts.
Suggested Applications: Loose trim, broken grilles, loose door glass channels and casting cracks and holes
21425
PERMATEX SURFACE INSENSITIVE THREADLOCKER BLUE #24027
OEM specified. Medium/high strength thread-locker for general-purpose applications. Especially well-suited for 1/4" to 3/4" (6mm to 20mm) fasteners that have a slight oil film. Prevents vibration loosening. Oil resistant. Removable with hand tools for easy disassembly.
Suggested Applications: Rocker studs, rocker adjustment bolts and bolts on valve and cam covers, oil pans, disc brake calipers, intakes, alternators, and pulley assemblies 6 ML Tube (Carded) 24027
PERMATEX MEDIUM STRENGTH THREADLOCKER BLUE #24200
OEM specified. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.
Suggested Applications: Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs 24200 6 ML Tube (Carded)
PERMATEX HIGH STRENGTH THREADLOCKER RED #27100
OEM specified. High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal.
Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts 6 ML Tube (Carded)
27100
PERMATEX HIGH TEMPERATURE THREADLOCKER RED #27200
OEM specified. High temperature/high strength threadlocker for heavy-duty applications. Prevents bolts and press fits 3/8" to 1" (10mm to 25mm) from loosening due to shock, severe vibration and heat stress. Exclusive formulation for newer engines and high performance applications that require extreme temperature resistance.
Suited for temperatures up to 450 F (232 C). Removable with heat and hand tools. 10 ML. Bottle
27200 280
AUTOMOTIVE SERVICE PRODUCTS
PERMATEX ANTI-SEIZE LUBRICANT #80078
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing and to assure easier disassembly. Temperature range: -60 F to 1600 F (-51 Cto 871 C). Salt, corrosion and moisture resistant ñ ideal for marine use. Non-aerosol version meets Mil Spec #907E. Aerosol - Level 3 8 0z.. Bottle
Suggested Applications: For easy removal of spark plugs, cylinder head and exhaust head bolts. 80078
PERMATEX COPPER ANTI-SEIZE LUBRICANT #31163
A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is fortified with high quality rust and corrosion inhibitors. Temperature range: -30 F to 1800 F (-34 C to 982 C). Provides good electrical conductivity. Meets Mil Spec #907E. 16 Oz. Brush-Top Bottle
Suggested Applications: Spark plug threads installed in aluminum, exhaust manifold bolts, engine bolts, oxygen sensors, knock sensors, thermostat housing bolts, fuel filter fittings, and battery cable connections 31163
PERMATEX HIGH TACK SPRAY-A-GASKET SEALANT #80065
Fast-drying all-purpose sealant dries to a highly tacky, non-brittle film. A reliable general adhesive. Remains effective under temperatures of -65 F to 500 F (-54 C to 260 C). Resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane. Level 3 12 Oz. Aerosol
Suggested Applications: Valve covers, fuel pumps, carburetors, manifold gaskets; seals all felt, cork, metal, paper, rubber and asbestos gaskets 80065
PERMATEX ULTRA BLUE MULTIPURPOSE RTV SILICONE GASKET MAKER #81724
OEM specified. Permatex Ultra silicones were developed to meet todayís technology changes. Sensor-safe, low odor, noncorrosive. Outstanding oil resistance and joint movement values. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. 3.35 Oz. Tube Temperature range -65 F to 500 F (-54 C to 260 C) intermittent; resists auto and shop fluids and vibration.
81724 Suggested Applications: Valve covers, oil pans, timing covers, transmission pans, differential covers
PERMATEX HIGH-TEMP RED RTV SILICONE GASKET #91160
OEM specified. Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket by making reliable ìformed-in-placeî gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -65 F to 650 F (-54C to 343C) intermittent; resists auto and shop fluids. First generation 1970-1980 gasket maker. 8 Oz. Tube
Suggested Applications: Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans
81160 PERMATEX ULTRA BLACK MAXIMUM OIL RESISTANCE #82180 RTV SILICONE GASKET MAKER
OEM specified. For dealership warranty requirements, ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistance properties through use of a patented adhesion system. Temperature range -65 F to 500 F (-54 C to 260 C) intermittent; resists auto and shop fluids and vibration. 3.35 Oz. Tube
Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, transmission pans 82180 281 AUTOMOTIVE SERVICE PRODUCTS
TECHNICAL CHEMICAL COMPANY
4604 2942 4642 2812 2412 4602
4603 PROFESSIONAL AUTO SERVICE CHEMICALS 2420 PART NO. DESCRIPTION CASE QUANTITY
2812 Power Steering Fluid 12 per Case 2942 Windshield Wash Concentrate 12 per Case 2418 12820 Windshield Wash Pre-Mix Gallons 6 per Case 2418 Non-Chlorinated Brake Cleaner 10 oz. 12 per Case 4642 Carb & Choke Cleaner 12 per Case 4602 Rust Penetrant 10 oz. 12 per Case 4603 Silicane Spray 10 oz. 12 per Case 4604 White Lithium Grease 10 oz. 12 per Case 2412 Disc Brake Quiet 8.5 oz. 12 per Case 2420 Brake Cleaner 18 oz. 12 per Case 4684 Fuel Injection Cleaner 8 oz. 12 per Case 2212 DOT3 Brake Fluid 12 oz. 12 per Case 2234 DOT3 Brake Fluid 32 oz. 4 per Case 5000 Diesel Conditioner 12 oz. 12 per Case TAC3913 Air Conditioner Odor Treatment 12 per Case PBBlaster Rust Penetrant 11 oz. 12 per Case
Leave the wrench on the bench.. Get it off faster - with PB Blaster!
REPLACEMENT LUG NUTS
PART NO. DESCRIPTION PART NO. DESCRIPTION
41128 12 x 1.25 Chrome Bulge Acorn - 3/4 Hex 91138 12 x 1.50 Chrome Bulge Acorn - 13/16 Hex 41138 12 x 1.50 Chrome Bulge Acorn - 3/4 Hex 91148 14 x 1.50 Chrome Bulge Acorn - 13/16 Hex 41148 14 x 1.55 Chrome Bulge Acorn - 3/4 Hex 91178 7/16” Chrome Bulge Acorn - 13/16 Hex 41178 7/16 “ Chrome Bulge Acorn - 3/4 Hex 91188 1/2” Chrome Bulge Acorn - 13/16 Hex 41188 1/2 “ Chrome Bulge Acorn - 3/4 Hex 5844 12 x 1.25 OE Lug Nut - 21mm Hex 71128 12 x 1.25 Chrome Acorn - 13/16 Hex 5845 12 x 1.50 OE Lug Nut - 19mm Hex 71138 13 x 1.50 Chrome Acorn - 13/16 Hex 5580R 7/16” OE Lug Nut - 3/4 Hex 71178 7/16” Chrome Acorn - 13/16 Hex 5581R 1/2” OE Lug Nut - 3/4 Hex 71188 1/2” Chrome Acorn - 13/16 Hex 5586R 1/2” OE Lug Nut - 13/16 Hex
282 NOTES
283 NOTES
284 NOTES
285