Test Equipment Solutions Datasheet
Test Equipment Solutions Ltd specialise in the second user sale, rental and distribution of quality test & measurement (T&M) equipment. We stock all major equipment types such as spectrum analyzers, signal generators, oscilloscopes, power meters, logic analysers etc from all the major suppliers such as Agilent, Tektronix, Anritsu and Rohde & Schwarz.
We are focused at the professional end of the marketplace, primarily working with customers for whom high performance, quality and service are key, whilst realising the cost savings that second user equipment offers. As such, we fully test & refurbish equipment in our in-house, traceable Lab. Items are supplied with manuals, accessories and typically a full no-quibble 2 year warranty. Our staff have extensive backgrounds in T&M, totalling over 150 years of combined experience, which enables us to deliver industry-leading service and support. We endeavour to be customer focused in every way right down to the detail, such as offering free delivery on sales, covering the cost of warranty returns BOTH ways (plus supplying a loan unit, if available) and supplying a free business tool with every order.
As well as the headline benefit of cost saving, second user offers shorter lead times, higher reliability and multivendor solutions. Rental, of course, is ideal for shorter term needs and offers fast delivery, flexibility, try-before-you-buy, zero capital expenditure, lower risk and off balance sheet accounting. Both second user and rental improve the key business measure of Return On Capital Employed.
We are based near Heathrow Airport in the UK from where we supply test equipment worldwide. Our facility incorporates Sales, Support, Admin, Logistics and our own in-house Lab.
All products supplied by Test Equipment Solutions include:
- No-quibble parts & labour warranty (we provide transport for UK mainland addresses). - Free loan equipment during warranty repair, if available. - Full electrical, mechanical and safety refurbishment in our in-house Lab. - Certificate of Conformance (calibration available on request). - Manuals and accessories required for normal operation. - Free insured delivery to your UK mainland address (sales). - Support from our team of seasoned Test & Measurement engineers. - ISO9001 quality assurance.
Test equipment Solutions Ltd Unit 8 Elder Way Waterside Drive Langley Berkshire SL3 6EP
T: +44 (0)1753 596000 F: +44 (0)1753 596001
Email: [email protected] Web: www.TestEquipmentHQ.com ®
Fluke 54100 Video Signal Generator Fluke 54200 TV Signal Generator
The purest signals, the widest choice ®
It’s all you need for accurate multi- standard video and TV signal testing
M eet th e 5 4 0 0 0 S eries from F lu k e, a rang e of easy to u se instru ments to test TV s, V CR s, set top b ox es and oth er video eq u ip ment. A c c ording to any video standard. A nd with today ’s widest c h oic e of h ig h ly ac c u rate sig nals.
Two models A ll ap p lic ations Covers all video standards There are two compact models in the The dig itally g enerated test sig nals of the series. The F lu k e 5 4 1 0 0 V ideo S ig nal F lu k e 5 4 0 0 0 S eries comply with the G enerator is the ob v iou s choice for recommendations of the C C IR , E B U , F C C , • M eets CCIR , E BU , F CC, ITU and E IA testing v ideo circu itry . The F lu k e 5 4 2 0 0 ITU and E IA standards for analog tele- TV S ig nal G enerator offers additional v ision. This v ersatility , comb ined with analog television standards sou nd test sig nals and a hig hly stab le the hig h sig nal q u ality (stab ility and • M ore th an 5 0 0 dig itally g enerated R F ou tpu t, mak ing it ideal for complete pu rity ) mak es them ideal for testing TV test p atterns for P A L , N TS C and testing of TV sets, V C R s or other related receiv ers, V C R s, camcorders, ob serv ation eq u ipment. B oth models offer selectab le sy stems and set-top decoder b ox es, and S E CA M , inc lu ding 1 6 :9 and 4 :3 TV standards (P A L , N TS C , S E C A M ), tex t also for check ing the performance of asp ec t ratios fu nctions and a choice of sig nal ou tpu ts. indiv idu al su b -assemb lies or components Y ou can choose from a nu mb er of readily u sed in these produ cts. • H ig h p rec ision setting and indic ation av ailab le pre-config u rations, or select an for video, c h rominanc e and R F instru ment that precisely matches y ou r E asy to U se testing req u irements, specify ing options These g enerators are ex cellent ex amples amp litu des from a rang e of stereo sou nd, data of F lu k e’s repu tation for easy -to-u se • V ery stab le R F terrestrial ou tp u t with serv ices and interface fu nctions. Y ou ’ll instru ments: find all details on the separate option • S elect the main fu nctions directly on internal/ ex ternal modu lation, g rou p and ordering information inserts. the front-panel k ey b oard. M ore delay p re-c orrec tion and a level u p to adv anced fu nctions can b e accessed 1 0 0 mV u sing soft k ey s and the larg e L C D (L iq u id C ry stal D isplay ) with its familiar g raphical interface. • A ccu rately set lu minance and chromi- nance amplitu des with the u p and down k ey s or the nu merical k ey b oard. • S tore u p to 9 9 different test situ ation setting s for later instantaneou s recall. • F inally , to mak e it ev en more con- v enient, a nu mb er of cou ntry specific setting s hav e b een pre-prog rammed. Ju st think of the time this will sav e y ou .
Ju st wh at y ou need W hether y ou work in dev elopment, produ ction, q u ality assu rance, instal- lation, maintenance or repair, there’s alway s a model to su it y ou r needs, thank s to the standard capab ilities of these instru ments, tog ether with the rang e of options. Their ease of u se and compact size mak es them ideal, b oth for personal u se on the b ench and for u se b y a g rou p of eng ineers. N eed to mak e au tomated measu rements? It’s simple with the F lu k e 5 4 0 0 0 S eries, as y ou can remotely control all fu nctions v ia the optional comb ined IE E E -4 8 8 (G P IB ) and R S -2 3 2 interface. Multi or single standard Stable RF output (Fluke 542 00 only) The Fluke 54100 Video Signal Generator You need to do tuner and IF tests? The and the Fluke 54200 TV Signal terrestrial output on the Fluke 54200 TV Generator are available with PAL, NTSC Signal Generator is just what you need. and/or SECAM video standard options. Its highly stable signal covers the entire You can select any combination of these RF frequency range from 32 to 900 MH z. standards to create a single, double or And you can set the frequency directly triple standard unit. The appropriate sub with 50 kH z resolution. For fast and standards (system B, D, G, I, K , K 1, L, M or precise reference, you can enter the N) are enabled automatically. amplitude either in mV or dBµ V and the maximum output level is as high as W ide range of patterns 100 mV for the entire bandwidth. The Fluke 54000 Series are today’s most Group delay pre-correction, also known versatile generators. O n all models you as group delay filtering, allows you to will find the test patterns and capabilities test applications that need accurate you’ll need to test and align the total luminance and chrominance timing. video signal path. There are over 500 test patterns – for calibrating geometry (in 4:3 and 16 :9 aspect ratios), synchro- nization, focusing, static and dynamic convergence. You’ll find signals for checking bandwidth, interference (such as cross-color), amplitude response, tracking and clipping. As well as for color reproduction, cut-off setting, high-voltage stability, analog-to-digital conversion, and much more. And your test results will always be reliable, as all test patterns are digitally generated to ensure high stability and precise timing. ®
Technical Specifications
Fluke 54100 Video Signal Generator
Fluke 54200 TV Signal Generator
OUTPUTS V ID E O CVBS VIDEO SY NCHRONISATION Voltage (Vpp in 7 5Ω): 1V (nominal setting) Reference: CCIR Rep. 624-4, 1990 Setting range: 0 to 1.5V ANSI/ SMPTE 17 0M-1994 Tolerance: 5%, 2% for nominal setting at System: 625 lines (50 Hz) reference temperature 525 lines (59.94 Hz) Resolution: 10 mV Line frequency: 15.625 kHz for 625 line system Impedance: 7 5Ω 15.7 34265 kHz for 525 line system Polarity: Positive, negative Tolerance: 3 ppm for +5 to + 45 °C Coupling: DC 1 ppm at reference temperature Aging: ≤ 2 ppm per year CVBS SY NC, LINE SY NC and Level: -43% for 625 line system FIELD SY NCHRONISATION -40 IRE for 525 line system Voltage (Vpp in 7 5Ω): 2V Tolerance: 3% for 625 line system Tolerance: 0.3V 3 IRE for 525 line system Impedance: 7 5Ω Polarity: Negative LUMINANCE Coupling: DC Reference: CCIR Rep. 624-4, 1990 ANSI/ SMPTE 17 0M-1994 EURO AV CONTROL VOLTAG ES Blanking level: 0% (0 IRE) Aspect Ratio: Automatically or off Black level: 0% for 625 line system Fast Blanking: Automatically or off +7 .5 IRE for 525 line system White level: 100% (100 IRE) TERRESTRIAL RF CARRIER (54200 only) Tolerance: 2% for 625 line system Frequency: 32 to 900 MHz 2 IRE for 525 line system Tolerance: 10 kHz Resolution: 50 kHz CHROMINANCE Spectral purity: ≤ -60 dBc inside actual Reference: CCIR Rep. 624-4, 1990 TV channel ANSI/SMPTE 17 0M-1994 ≤ -30 dBc outside actual System: PAL B, D, G, I, K, M, N TV channel NTSC M Voltage (Vrms in 7 5Ω): 100 mV for high range NTSC with 4.433619 MHz 10 mV for low range SECAM B, D, G, K, K1, L Attenuation: 0 to 80 dB for high range Carrier frequency: 4.433619 MHz for PAL B, D, 0 to 60 dB for low range G, I, K and NTSC 4.43 Readout: mV, dBµV 3.57 5611 MHz for PAL M Resolution: 0.01 mV for voltage ≤ 10 mV 3.582056 MHz for PAL N 0.1 mV for voltage > 10 mV 3.57 9545 MHz for NTSC M 1 dB for dBµV indication 4.406250 and Tolerance: 3 dB 4.250000 MHz for SECAM Flatness: ≤ 2 dB for 32 to 900 MHz Tolerance: 3 ppm for +5 to +45 °C Impedance: 7 5Ω 1 ppm at reference Modulation: Double sideband AM temperature Internal, external Aging: ≤ 2 ppm per year Group delay: 2 different types (or off) Phase tolerance (PAL/NTSC): 2°, 1° at reference temperature IN PUTS Level: 100% (nominal setting) VIDEO IN (54200 only) Setting range: 0% to 150% Voltage (Vpp): 1V (nominal) Resolution: 1% Impedance: 7 5Ω Polarity: Positive Coupling: DC Values stated without tolerances are typical values ®
Technical Specifications (cont.) VCR patterns
PATTERNS Reference: ITU Rec. 471-1/1994 and SMPTE EG27- 1994 for color bar SMPTE EG1-1990 for SMPTE color bar CCIR Rec. 473-5, 1990 and CCIR Rec. R26-1981 for IRS 17 CCIR Rec. 473-5, 1990 for multi burst CCIR Rep. 1221 for PLUGE Aspect ratio: 4:3, 16:9 Circle: 4 additional circles in 16:9 mode Center cross: With border castellations (overscan in- dication selectable between 2% or 3%) White: 0, 5, 15 to 100% (5% steps) for 625 line system 7.5, 15 to 100 IRE (5 IRE steps) for 525 line system Purity: Red, green, blue, cyan, magenta, yellow, Digital scan patterns white, black (100/0/75/0 for 625 line system and 100/7.5/75/7.5 for 525 line system) Dots: 17x13 dots in 4:3 mode, 23x13 dots in 16:9 mode Color bar patterns With center indication Crosshatch: 18x14 lines in 4:3 mode, 24x14 lines in 16:9 mode With center and top/left indication (selectable) Checkerboard: 12x9 squares in 4:3 mode, 16x9 squares in 16:9 mode PLUGE: -1.6, 0, 1.6, 100% for 625 line system 4.8, 7.5, 10.7, 100 IRE for 525 line system Grey scale: 10 steps linear staircase VCR: VCR test (2 types) Resolution test (2 types) Writing current Multi burst: 0.5, 1.0, 2.0, 4.0, 4.8, 5.8 MHz for 625 line system 0.5, 1.0, 2.0, 3.0, 3.58, 4.2 MHz for 525 line system With time intervals Digital scan: ADC check (2 types) Demodulator patterns Moving block Progressive scan check (3 types) Color bar: 75/0/75/0, 100/0/75/0, 75/0/100/25, 100/0/100/25 for 625 line system IRS 17 pattern 75/7.5/75/7.5, 100/7.5/75/7.5 for 525 line system SMPTE color bar Horizontal color bar (75/0/75/0 for 625 line system and 75/7.5/75/7.5 for 525 line system) DEM: Demodulator test (2 types) Color temperature: 3 different sizes with adjustable levels for center and border Diverse: EHT test (Reference rectangle with switching white/black window) IRS 17 (Available as full field test pattern as well as reference line 17, only for 625 line system) Pattern combinations Pattern combination: Circle with every other pattern (except progressive scan) or combination Center cross / crosshatch / dots / purity Grey scale / white / multi burst / color bar ®
That sounds just right....
Push-button mono sound test signals To h e lp y ou te st th e m on o sou n d c a p a b ilitie s of TV re c e iv e rs a n d V C R s, sta n d a rd a u d io te st sig n a ls a re a v a ila b le w ith e v e ry se le c te d ste re o sou n d op tion on th e F lu k e 5 4 2 0 0 TV S ig n a l G e n e ra tor. S e v e ra l ton e fre q u e n c ie s a llow y ou to te st th e c om p le te p a th for a u d io sou n d . O p e ra tion is sim p le , a s y ou c a n se le c t th e m a in sou n d te st fu n c tion s d ire c tly on th e fron t p a n e l. M ore sp e c ific se ttin g s, su c h a s sou n d c a rrie r le v e l, fre q u e n c y a n d p re - e m p h a sis, c a n b e m od ifie d v ia soft k e y s . M ulti-sy stem analog stereo Th e a n a log ste re o op tion su p p orts v a riou s tw o-c a rrie r a n a log ste re o sy ste m s, in c lu d in g B G , A 2 a n d M k ste re o. Th e B a n d G ste re o sy ste m s a re ofte n re fe rre d to a s G e rm a n or General sound settings 'Z w e iton ' ste re o. A 2 ste re o is u se d in c om b in a tion w ith b oth S E C A M a n d P A L te le v ision sta n d a rd s . It is tra n sm itte d in se v e ra l e a ste rn E u rop e a n c ou n trie s a n d is a lso k n ow n a s P A L /S E C A M sy ste m D K ste re o. M k is a tw o-c a rrie r NTS C ste re o sou n d sy ste m a n d is u se d in K ore a . F or a ll th e se tw o-c a rrie r ste re o sy ste m s, th e a n a log ste re o op tion g e n e ra te s th e a p p rop ria te p ilots a n d d e liv e rs ton e fre q u e n c ie s in m on o, ste re o or d u a l m od e . Ton e fre q u e n c ie s of 0 .5 , 1 .0 a n d 3 .0 k H z a re in c lu d e d a n d for sy ste m M a n d N th e low e st fre q u e n c y is 0 .3 k H z . U sin g th e se a n a log sou n d fu n c tion s, y ou c a n te st a v a rie ty of a u d io p a ra m e te rs, su c h a s c h a n n e l se p a ra tion , sig n a l to n oise a n d h a rm on ic d istortion . A ll sig n a ls a re g e n e ra te d d ig ita lly , S ound system selec tion to e n su re h ig h sig n a l sta b ility a n d p u rity .
• A n a log ste re o c on ta in in g G e rm a n , K ore a n a n d D K ste re o • NIC A M ste re o • B TS C sou n d te st sig n a ls (M TS S te re o p lu s S A P ) ®
Versatile NICAM digital sound If you need digital sound capabilities, you should specify this option. NICAM, also available in SECAM, is compatible with the ex isting PAL terrestrial TV and cable TV standards, and adds two high-quality digital sound channels. Suitable TV sets can receive two mono channels (this is called dual channel) for simultaneous translation of foreign-language programs, stereo signals or transparent transmission of data. The option provides mono, stereo and dual tone modes to check the digital sound performance. For channel 1, tone frequencies of 0.5, 1.0, 1.5 and 3.0 kHz are available, while you can modulate NICAM modes channel 2 with a signal frequency of 1.0, 1.5, 3.0 and 12 kHz. Both digital sound channels have selectable low- or high-amplitude signals to test the NICAM ex pander of the TV receiver. Y ou can check the operation of the Q PSK demodulator and NICAM decoder with three special test signals. Y ou can also use these to perform a level adjustment or measurement. A high/low selectable RSSF (Reserve Sound Switching Flag) indicates that the analog (mono) and digital sound carriers are transmitting different information, or that there are errors in the digital transmission. B TSC sound (MTS Stereo p lus SAP) In combination with NTSC and PAL TV standards, this sound option generates BTSC sound signals or Multi channel Television Sound (MTS). Apart from mono and stereo sound, a Second Audio Program (SAP) is also available. Y ou can select various test tone frequency (0.3, 1.0 and 3.0 kHz) and mode combinations, as well as special test signals. These special test signals give you an easy functional test for channel separation, signal to SAP modulation enab ling noise ratio, level gaining and harmonic distortion of the stereo and SAP decoders. All sound signals are digitally generated which ensures high stability, and they are available both at the RF output or, via baseband processing, at the precision MPX output. ®
Technical specifications
OUTPUTS MONO SOUND CARRIER SOUND CARRIER Voltage (Vpp in 50Ω ): 142 mV for mono carrier and Frequency: 4.5 MHz for system M, N system B, G 5.5 MHz for system B, G 200 mV for mono carrier and 6 .0 MHz for system I system D, I, K, K1, L, M, N 6 .5 MHz for system D, K, K1, L 6 3.2 mV for stereo and NICAM Tolerance: 3 ppm for + 5 to + 45°C (system B, D, G, I, K) carrier 1 ppm at reference temperature 28 .3 mV for NICAM (system L) Aging: ≤ 2 ppm per year carrier Level: -13 dBc for system B, D, G, K, K1 Setting range: 112.5 to 356 mV for mono carrier -10 dBc for system I, L, M, N 28 .3 mV, 35.6 mV, 6 3.2 mV for Setting range: -5 to -15 dBc stereo and NICAM carrier Tolerance: 2 dB at reference temperature Tolerance: 2 dB Resolution: 1 dB Resolution: 1 dB Impedance: 50Ω MODUL ATION Connector: BNC rear Frequency: 0.5, 1.0, 3.0 kHz for system B, D, G, I, K, K1, L AUDIO and EURO AV 0.3, 1.0, 3.0 kHz for system M, N Voltage (Vrms in Type: FM for system B, D, G, I, K, K1, M, open circuit): 500 mV N Tolerance: 5% AM for system L Impedance: 6 00Ω Deviation: 27 kHz for system B, D, G, I, K, K1 Connector: Cinch rear, EURO AV rear 13.5 kHz for system M, N Tolerance: 5% BTSC MPX and F M STEREO PIL OT Pre-emphasis: 50 µ s for system B, D, G, I, K, K1 Voltage (Vrms in 7 5 µ s for system M, N open circuit): 550 mV Modulation depth: 54% for system L Tolerance: 5% Impedance: 6 00Ω STEREO Connector: BNC rear SOUND CARRIER 1 Data: As Mono NICAM DATA and NICAM CL OCK Frequency: 7 28 kHz SOUND CARRIER 2 Tolerance: 3 ppm for + 5 to + 45°C Frequency: 5.7 4218 7 5 MHz for system B, G 1 ppm at reference temperature 6 .257 8 125 MHz for system D, K Aging: ≤ 2 ppm per year (A2) Voltage (Vpp in 50Ω ): 1V 4.7 24 MHz for system Mk Tolerance: 10% Tolerance: 3 ppm for + 5 to + 45°C Impedance: 50Ω 1 ppm at reference temperature Connector: BNC rear Aging: ≤ 2 ppm per year Level: -20 dBc INPUTS Setting range: -20, -25, -27 dBc AUDIO, EURO AV and MTS Tolerance: 3 dB at reference temperature Voltage (Vrms): 500 mV (nominal) Impedance: 0.1 MΩ MODUL ATION Connector: Cinch rear, EURO AV rear, BNC Frequency: 0.5, 1.0, 3.0 kHz for system B, D, rear G, K 0.3, 1.0, 3.0 kHz for system Mk Type: FM Deviation: 27 kHz for system B, D, G, K 13.5 kHz for system Mk Tolerance: 5% Pre-emphasis: 50 µ s for system B, D, G, K 7 5 µ s for system Mk ®
Technical specifications (cont.)
IDENTIFICATION MODULATION Reference: CCIR Rec. 707 Frequency: 0.3, 1.0, 3.0 kHz for channel 1 Frequency: fH / 133 for stereo and system B, 1.0, 3.0 kHz for channel 2 (3.1 D, G, K and 8.0 kHz in Test modes) fH / 105 for stereo and system Mk 5.0 kHz for SAP (0.3 and 1.0 kHz fH / 57 for dual in Test modes) Tolerance: 3 ppm for +5 to +45°C Type: FM with BTSC base band 1 ppm at reference temperature Base band: Main channel Aging: ≤ 2 ppm per year Identification pilot Type: AM Stereo sub channel Modulation depth: 50% SAP sub channel Tolerance: 5% Base band type: FM modulated (BTSC compressed) for stereo sub channel NICAM STEREO AM modulated with suppressed SOUND CARRIER 1 carrier (BTSC compressed) for SAP Data: As Mono subchannel Mode: Mono, stereo, SAP SOUND CARRIER 2 Tolerance: 5% Frequency: 5.85 MHz for system B, D, G, K, L Pre-emphasis: 75 µs 6.875 MHz for system D, K 6.552 MHz for system I IDENTIFICATION Tolerance: 3 ppm for +5 to +45°C Frequency: fH 1 ppm at reference temperature Tolerance: 3 ppm for +5 to +45°C Aging: ≤ 2 ppm per year 1 ppm at reference temperature Level: -20 dBc for system B, D, G, I, K Aging: ≤ 2 ppm per year -27 dBc for system L Setting range: -20, -25, -27 dBc Tolerance: 3 dB at reference temperature MODULATION Reference: NICAM-728 CCITT Rec J17 Frequency: 0.5, 1.0, 1.5, 3.0 kHz for channel 1 1.0, 1.5, 3.0, 12 kHz for channel 2 Demodulator pattern Decoder pattern Unmodulated carrier Type: QPSK Mode: Mono, Dual, Stereo, Test Bit-rate: 728 kbits/s Tolerance: 3 ppm for +5 to +45°C 1 ppm at reference temperature Aging: ≤ 2 ppm per year Level: High, low RSSF: On, off Fluke Corporation P.O. Box 9090, Everett, W A 98206 BTSC STEREO SOUND CARRIER Fluke Europe B .V . Frequency: 4.5 MHz for system M, N P.O. Box 1186, Tolerance: 3 ppm for +5 to +45°C 5602 BD Eindhoven, 1 ppm at reference temperature The Netherlands Aging: ≤ 2 ppm per year Level: -10 dBc For more information call: Setting range -5 to -15 dBc In the U.S.A.: (800) 443-5853 Tolerance: 2 dB at reference temperature or Fax: (425) 356-5116 Resolution: 1 dB In Europe/M-East: +31 (0)40 2 678 200 or Fax: +31 (0)40 2 678 222 In Canada: (905) 890-7600 or Fax: (905) 890-6866 From other countries: +1(425) 356-5500 or Fax: +1 (425) 356-5116 W eb access: http://www.fluke.com
©Copyright 1998 Fluke Corporation. All rights reserved. ®
Making the right connections
Multiple outputs For some measurements, a composite video signal is not enough. So, the Fluke 54000 Series’ RGB, YC and YCrCb option gives you additional separate output signals for red, green and blue (RGB), luminance (Y), chrominance (C) and component outputs Cr and Cb. The RGB and YC signals are available at separated connectors and on the EURO AV RGB signals (SCART) connector. The RGB signal is ideal to control devices such as components or subassemblies directly at color decoded level. You can even include synchronization signals in the individual RGB signals. You’ll need the YC output signals – which are also provided via a special connector and cable – for testing the S-VHS/Hi-8 input of video recorders. These VCRs eliminate cross-color effects by separately processing the Y and C signals, Y CrCb signals Y C signals which gives better color reproduction. The component outputs Cr and Cb (also known as R-Y and B-Y) are phase related to U and V (U = 0.49 x Cb, V = 0.88 x Cr). These component signals are used in the professional video area and in applications where color conversions or pattern processing are tested.
F ully prog ra m m a b le You can include the Fluke 54000 Series generators in an automated test environment with the interface option. Offering a combined IEEE-488 and RS-232 interface, this option makes the instrument fully programmable from a remote location. The IEEE-488 interface often forms the basis of fully automated test environments, while the RS-232 serial interface is mostly used to control the instrument economically from a PC in a stand alone application. All the instrument’s Fully programmable v ia IEEE-4 8 4 and RS-2 3 2 standard, function and mode settings can be changed or retrieved via the IEEE-488 or RS-232 interface.
Interface options
• RGB, YC (S-VHS/Hi-8), YCrCb output signals available • Fully programmable via combined IEEE-488 and RS-232 interface ®
Technical specifications
RGB OUTPUTS IE E E -4 8 8 IN TE RFA C E Voltage (Vpp in 75Ω ): 700 mV Allows selection and control of all functions Tolerance: 5% Reference: ANSI/IEEE Std. 488-1987 2% at reference temperature Compatibility: IEEE-488.2-1987 Impedance: 75Ω Interface functions: AH1, SH1, L4, T6, RL1, SR1, DC1 Polarity: Positive Connector: Amphenol rear (RFI/EMI shielded) Coupling: DC Blanking level: 0V RS-2 3 2 IN TE RFA C E Offset: ± 200 mV Allows selection and control of all functions Synchronisation: Selectable in R, G, B or off (only Command set As IEEE-488 interface for BNC outputs) Baud rate: 110 to 19200 Connector: BNC rear, Data bits: 7, 8 EURO AV rear Stop bits: 1, 2 Parity check: Odd, even, no Y C OUTPUTS Handshake: Software, hardware Luminance voltage Connector: 9 pin D-type rear (male) (Vpp in 75Ω ): 1V Tolerance: 5% 2% at reference temperature Coupling: DC Blanking level: 0V Offset: ± 200 mV Chrominance level: 100% Tolerance: 5% 2% at reference temperature Impedance: 75Ω Polarity: Positive Coupling: AC Connector: S-VHS rear, EURO AV rear Y C rC b OUTPUTS Voltage (Vpp in 75Ω ): 700 mV Tolerance: 5% 2% at reference temperature Impedance: 75Ω Polarity: Positive Coupling: DC Blanking level: 0V Offset: ± 200 mV Connector: BNC rear Fluke Corporation P.O. Box 9090, Everett, WA 98206
Fluke Europe B.V. P.O. Box 1186, 5602 BD Eindhoven, The Netherlands
For more information call: In the U.S.A.: (800) 443-5853 or Fax: (425) 356-5116 In Europe/M-East: +31 (0)40 2 678 200 or Fax: +31 (0)40 2 678 222 In Canada: (905) 890-7600 or Fax: (905) 890-6866 From other countries: +1(425) 356-5500 or Fax: +1 (425) 356-5116 Web access: http://www.fluke.com
©Copyright 1998 Fluke Corporation. All rights reserved. ®
Reading between the lines
Powerful teletext capabilities W ith th is d a ta se rv ic e s o p tio n , y o u a d d p o w e rfu l te le te x t te st c a p a b ilitie s to y o u r F lu k e 5 4 0 0 0 S e rie s in stru m e n t to m e e t th e h ig h ly sp e c ia lize d re q u ire m e n ts fo r c h e c k in g a n d a lig n in g te le te x t re c e iv e rs a n d d e c o d e rs . Y o u w ill h a v e a se le c tio n o f o v e r te n te le te x t p a g e s w ith sp e c ia l c o n te n ts fo r d e c o d e r te stin g a t y o u r d isp o sa l, fo r u se w ith th e P A L a n d /o r S E C A M sta n d a rd s . T h is o p tio n a lso su p p o rts W id e S c re e n S ig n a lin g (W S S ) a n d in c lu d e s D id o n A n tio p e te le te x t sig n a ls a s w e ll a s te st fa c ilitie s fo r F L O F (F u ll L e v e l O n e F e a tu re s), T O P (T a b le O f P a g e s) a n d V P T (V id e o P ro g ra m m in g b y T e le te x t).
Variety of teletext modes
W id e Screen Sign alin g support T h e n e e d fo r a d d itio n a l sig n a lin g h a s in c re a se d su b sta n tia lly , b e c a u se o f th e v a rie ty o f b ro a d c a st tra n sm issio n s a n d te le v isio n se t c a p a b ilitie s . T h e W id e S c re e n S ig n a lin g (W S S ) b its a re p re se n t in lin e 2 3 o f th e v id e o sig n a l a n d c o n ta in in fo rm a tio n a b o u t th e a sp e c t ra tio , a u d io a n d d a ta se rv ic e s o f th e tra n sm issio n . W ith W S S , w h ic h is in c lu d e d w ith th e te le te x t o p tio n , y o u r F lu k e 5 4 0 0 0 S e rie s g e n e ra to r a u to m a tic a lly tra n sm its th e a p p ro p ria te sig n a lin g a c c o rd in g to th e g e n e ra to r se ttin g . In m a n u a l m o d e , y o u c a n p ro g ra m th e W S S b its in d e p e n d e n tly to se t th e m to y o u r sp e c ific re q u ire m e n ts .
W ide S c reen S ig n alin g b its p rog rammin g
• T e le te x t (T O P , F L O F a n d V P T ) • W id e S c re e n S ig n a lin g (W S S ) b its su p p o rt • E a sy p ro g ra m m a b le P ro g ra m D e liv e ry C o n tro l (P D C ) a n d V id e o P ro g ra m S y ste m (V P S ) te st fu n c tio n s • C lo se d C a p tio n (lin e 2 1 d a ta se rv ic e s) te stin g ®
Easily programmable PDC and VPS PDC and VPS test facilities are available optionally with the teletext option. B oth systems use control information transmitted with the program to start and stop recording of that program on a VCR . For optimum flexibility, you can use any of nine coded PDC or VPS signals and both types of signal can even be transmitted simultaneously. When testing PDC, you can program PIL (date & time), CNI (country & network), PTY, PTL and the program name. You can even test multi labeling. In VPS mode, you can set information on date, transmission time, country indication, TV channel, stereo/dual/mono sound, adult/general program content and the program name. Special PDC and VPS signals such as timer control code, recording inhibit/terminate code, interruption code and continuation code are also available. Programming of the codes for both PDC and VPS is simple, using the instrument's large display and softkeys. PDC programming
Versatile Closed Caption testing Closed Caption is also known as line 21 data services for NTSC. It is a visual representation of the information that is simultaneously transmitted on the audio part of a television signal. In the U SA, TV sets with screen sizes of 13" and up must have a Closed Caption decoder. Closed Caption is not only used in NTSC countries such as the U SA, K orea and Japan, but it can be and is used with the PAL standard as well. The Closed Caption option on the Fluke 54000 Series offers you both caption and text modes in one of four operating channels. It provides eight factory pre-coded Closed Caption memories with a selection of Selecting th e different types of information and modes, such Closed Caption content as roll-up, pop-on and paint-on. All line 21 decoder capabilities can easily be tested, as memory 9 is an automatic Closed Caption sequence of memories 1 to 8 . ®
Technical specifications
WSS TELETEXT DIDON ANTIOPE Reference: ETSI, ETS 300 294, November 1994 (CCIR sy ste m A ) PALplus system description, Revision 3.0, Reference: CCIR Rec. 653-1 January 1994 CCIR Doc. 11/345-E Rec. ITU-R BT.1119 System: 625 line system System: 625 line system Data line: 20, 21, 333, 334 Data line: 23 (field 1) Signalling method: Binary NRZ Signalling method: Bi-phase coding, NRZ -L Clock frequency: 6.203125 MH z Clock frequency: 5 MH z Tolerance: 3 ppm for +5 to +45 °C Tolerance: 3 ppm for +5 to +45 °C 1 ppm at reference temperature 1 ppm at reference temperature Aging: ≤ 2 ppm per year Aging: ≤ 2 ppm per year Level: 7 /3 of sync amplitude for '1' Level: 500 mV for '1' at 7 00 mV maximum video Black level for '0' level Tolerance: 0 to -10% for '1' Black level for '0' 3% of sync amplitude for '0' Tolerance: 5% for '1' 3% of sync amplitude for '0' TELETEXT UK (CCIR system B) Reference: CCIR Rec. 653-1 PDC CCIR Doc. 11/282-E Reference: EBU SPB 459 Revision 2 System: 625 line system Specification of the domestic video Program Data line: 13, 14, 20, 21, 326, 327 , 333, 334 for 8 Delivery Control system line mode February 1992 20, 21, 333, 334 for 4 line mode System: TELETEX T UK (CCIR system B) Signaling method: Binary NRZ Programming: All parameters Clock frequency: 6.937 5 MH z Labeling: Single, multi Tolerance: 3 ppm for +5 to +45 °C 1 ppm at reference temperature VPS Aging: ≤ 2 ppm per year Reference: Technische Richtlinie ARD/Z DF Level: 66% of the difference between black level Nr. 8 R 2 and peak white level Video Program System Black level for '0' EBU SPB 459 Revision 2 Tolerance: 6% for '1' Specification of the domestic video Program 2% of sync amplitude for '0' Delivery Control system February 1992 System: 625 line system Data line: 16 Signalling method: Bi-phase modulation Clock frequency: 5.0 MH z Tolerance: 3 ppm for +5 to +45 °C 1 ppm at reference temperature Aging: ≤ 2 ppm per year Level: 500 mV for '1' at 7 00 mV maximum video level Black level for '0' Fluke Corporation Tolerance: 5% for '1' P.O. Box 9090, Everett, WA 98206 3% of sync amplitude for '0' Programming: All parameters Fluke Europe B .V. P.O. Box 1186, CLOSED CAPTION 5602 BD Eindhoven, Reference: FCC 47 CFR Part 15 The Netherlands Report No: E-7 7 09-C Draft EIA-608 For more information call: System: 525 line system In the U.S.A.: (800) 443-5853 625 line system Data line: 21 (field 1 and field 2) or Fax: (425) 356-5116 Signalling method: Binary NRZ In Europe/M-East: Clock frequency: 503.4965 kH z for 525 line system +31 (0)40 2 67 8 200 500 kH z for 625 line system or Fax: +31 (0)40 2 67 8 222 Tolerance: 3 ppm for +5 to +45 °C In Canada: (905) 890-7 600 1 ppm at reference temperature or Fax: (905) 890-6866 Aging: ≤ 2 ppm per year From other countries: Level: 50 IRE (50% ) for '1' +1(425) 356-5500 0 IRE (0% ) for '0' or Fax: +1 (425) 356-5116 Tolerance: 5 IRE for '1' Web access: http://www.fluke.com 1 IRE for '0' Operation mode: CC1 to CC4 ©Copyright 1998 Fluke Corporation. T1 to T4 All rights reserved. ®
Pre-configuration models
Fluke 54100 Video Signal Generator models (option included): 541 00 541 00 541 00 541 00 M01 /nnn P01 /nnn N01 /nnn S01 /nnn PAL standard • • NTSC standard • • SECAM standard • • Teletext + WSS • • • PDC + VPS • • • Closed Caption • • RGB + YC + YCrCb • • • • IEEE + RS-232 • • • •
Fluke 542 00 T V Signal Generator models (option included): 54200 54200 54200 54200 M01 /nnn P01 /nnn N01 /nnn S01 /nnn PAL standard • • NTSC standard • • SECAM standard • • Teletext + WSS • • • PDC + VPS • • • Closed Caption • • RGB + YC + YCrCb • • • • IEEE + RS-232 • • • • Analog stereo • • • • NICAM stereo • • • BTSC stereo • •
O perating manual languages and line cords (/nnn v ersions): Europa U SA U K Sw iss Australia English /001 /003 /004 /005 /008 French /011 /013 - /015 - German /021 - - /025 -
Example: 54100P01/021 Fluke 54100 Video Signal Generator with PAL standard, Teletext + WSS, PDC + VPS, RGB + YC + YCrCb, IEEE + RS-232, a German language Operating manual and an European line cord.
Option: 54091 19” rackmount ®
Customer specified configurations
Basic models (tick at least one)
❒ 54100/nnn Video Signal Generator ❒ 54200/nnn TV Signal Generator
T V System options(tick at least one)
❒ 54011 PAL standard ❒ 54012 NTSC standard ❒ 54013 SECAM standard
Data service options Interface options
❒ 54021 Teletext + WSS ❒ 54031 RGB + YC + YCrCb ❒ 54022 PDC + VPC (only in ❒ 54032 IEEE + RS-232 interface combination with option 54021) ❒ 54023 Closed Caption
Sound options (for 54200/nnn only tick at least one) ❒ 54061 Analog stereo ❒ 54062 NICAM stereo ❒ 54063 BTSC stereo
Installation accessories
❒ R emark: options are also service center 54091 19” rackmount retrofittable
Fluke Corporation P.O. Box 9090, Everett, WA 98206
Operating manual languages and line cords (/nnn versions): Fluke Europe B.V. Europa USA UK Swiss Australia P.O. Box 1186, English /001 /003 /004 /005 /008 5602 BD Eindhoven, French /011 /013 - /015 - The Netherlands German /021 - - /025 - For more information call: In the U.S.A.: (800) 443-5853 or Fax: (425) 356-5116 Example: 54100/021 + 54011 + 54021 + 54022 + 54032 + 54091 In Europe/M-East: Fluke 54100 Video Signal Generator with a German language Operating +31 (0)40 2 678 200 manual, an European line cord, PAL standard, Teletext + WSS, PDC + or Fax: +31 (0)40 2 678 222 VPC, IEEE + RS-232 and 19” rackmount. In Canada: (905) 890-7600 or Fax: (905) 890-6866 Please contact your Fluke sales representative to optimize the From other countries: configuration to your personal requirements. +1(425) 356-5500 or Fax: +1 (425) 356-5116 Web access: http://www.fluke.com
©Copyright 1998 Fluke Corporation. All rights reserved. ®
General Specifications
ENVIRONMENTAL CONDITIONS Environment: Laboratory equipment Class 5 (MIL-T-28800D) Warming-up time: 30 min Recalibration interval: 12 months Temperature: +22 to +24 °C for reference temperature 0 to +50 °C for operating -20 to +71 °C for non-operating Reliability: MTBF = 20,000 hours Humidity, altitude, vibration and shock: MIL-T-28800D (Class 5) Safety: EN 61010-1 +/A2, Class I IEC 1010-1 +A1 +A2, Class I CAN/CSA-C22.2 No 1010.1, Class I EMC: EN 55011, Group 1, Class B VDE 0875, Part 11, Group 1, Class B CISPR 11, Group 1, Class B FCC Part 15J, Class A
POWER REQ UIREMENTS Line voltage operating: 90 to 264V Line frequency: 47.5 to 63 Hz Power consumption: 60W
DIMENSIONS and WEIGHT Width: 323 mm (12.72 in) Height: 147 mm (5.79 in) 132.5 mm (5.22 in) without feet (≈3HE) Depth: 417 mm (16.42 in) Weight: Net 9.8 kg (21.6 lb) Shipping 11.4 kg (25.1 lb)
Values stated without tolerances are typical values
Fluke Corporation PO Box 9090, Everett, WA 98206
Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands
For more information call: In the U.S.A.: (800) 443-5853 or Fax: (206) 356-5116 In Europe/M-East: +(3140) 2 678 200 or Fax: +(3140) 2 678 222 In Canada: (905) 890-7600 or Fax: (905) 890-6866 From other countries: +1(206) 356-5500 or Fax: +1(206) 356- 5116 Web access: http://www.fluke.com
©Copyright 1996 Fluke Corporation. All rights reserved. Printed in the Netherlands 11/96. Date subject to alteration without notice. XXXXXXXX Rev xxxxx