Release Notes for Vocollect Voiceclient 1.1 for Psion Teklogix WORKABOUT PRO 7527

11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 Release Notes for Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527

Release Highlights

Printing and Scanning

General Considerations and Limitations

Installation Procedures

Third Party Software

Warning: This version of VoiceClient is not compatible with the Psion Teklogix WORKABOUT PRO 7525 device. Release Highlights

Version number associated with this release:

WAP417_V1.1

This release supports the use of VoiceClient on Psion Teklogix WORKABOUT PRO 7527 handheld devices running either Microsoft® Windows® CE 5.0 (OS version G047, boot code version G187) or Microsoft Windows Mobile® 6 (version F097 for both OS and boot code). Windows Mobile 6 supports both English and French operating systems. VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO is supported on Vocollect VoiceConsole 2.2 or newer.

SR-Series Vocollect headsets are the only headsets approved for use with the WORKABOUT PRO 7527 device. Templates trained on Talkman wearable computers can be used with this version of Vocollect Voice on the WORKABOUT PRO.

Key Features

Device Firmware Update (DFU) allows the audio card firmware to be updated and verifies audio card compatibility with Vocollect Voice. DFU runs automatically during Vocollect Voice installation. It can also be initiated through its stand-alone application, VocollectAudioCardUpdater, accessed through Vocollect Voice.

Warning: Do not reboot a device while DFU is taking place. Doing so will corrupt the firmware.

Bluetooth printing is supported on Windows Mobile and Windows CE devices. Supported Bluetooth printers include: Zebra QL 220 Zebra QL 320 Zebra QL 420 Bluetooth scanning is supported on Windows CE devices. Supported Bluetooth scanners include: Metrologic Voyager BT 9535 Bluetooth Scanner file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rele… 1/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 Supported internal scanners and imagers include:

SE1223HP Scanner (WA9000-G1) SE955 (pod) (WA9002-G1) HHP 5180 (pod) Imager (WA9012-G1) EV15 (pod) Imager (WA9003-G1)

Note: See Printing and Scanning for details on setting up printers and scanners.

During enrollment training, words with fewer than 11 characters appear onscreen in a larger font size than words with 11 or more characters.

Configurable Parameters

Battery Parameters

The following configurable parameters allow you to adjust low battery level warning messages. By default, low battery warnings for the 7527 device begin when its battery's remaining capacity reaches 30 percent.

Note: The registry location [HKEY_LOCAL_MACHINE\Software\Vocollect\Vocollect Voice Client\DeviceSpecific] must be placed above the following parameters in order to function. Placing other parameters below this area may cause them to not function. Be sure that any modifications to your configuration file take into account the location of previously used registry parameters and the registry locations under which they must reside.

BatteryLowWarningPct This parameter controls the battery level reading that triggers the first battery warnings spoken to an operator. Default = 30

BatteryCriticalLowPct This parameter controls the battery level reading that triggers the final battery warning spoken to an operator. Default = 8

BatteryPollingIntervalMSecs This parameter controls how often Vocollect Voice polls the power level of the battery attached to a device. It is recommended to use default values for this parameter. Default = 58000 (58 seconds)

Printer and Scanner Parameters

By default, Metrologic scanners add a carriage return and line feed () to the end of all scanned barcodes. This can cause some barcodes to be read incorrectly.

WapScanRemoveCrLf Adding this parameter to the device's configuration file prohibits the Metrologic scanner from adding a carriage return and line feed to the end of all scanned barcodes. After adding the parameter, tap Tools | Exit, and then restart Vocollect Voice to activate the new setting.

Accepted values:

file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rele… 2/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 0 (default) 1 ( is removed from scans)

PrinterPort This parameter identifies to VoiceConsole the port on your device to which your printer's messages are sent. When setting up a Bluetooth printer, you must match the COM setting identified in VoiceConsole with the device's printer COM port. X represents the number of the COM port identified on your device's screen, so be sure to enter the correct number when applying this setting.

Accepted values:

Red (used for T-Series wearable computers or handheld devices that support serial printers) Blue (used for T-Series wearable computers or handheld devices that support serial printers) COMx (used for 7527 devices with Bluetooth printers) BSPx (used for 7527 devices with Bluetooth printers)

Language Support

This version of VoiceClient supports 18 languages

Note: You must have a license for each language in use at your site.

VoiceClient - TTS Languages Available

TTS Voice Language Language Indicator Options American English (en_US) female, male Belgian Dutch (nl_BE) female Brazilian Portuguese (pt_BR) female, male British English (en_GB) female Canadian French (fr_CA) female, male Danish (da_DK) female Finnish (fi_FI) female, male French (fr_FR) female German (de_DE) female Greek* (el_GR) male Italian (it_IT) female, male Netherlands Dutch (nl_NL) female Latin-American (es_MX) female, male Spanish Norwegian (no_NO) female Polish* (pl_PL) female Portuguese (pt_PT) female Spanish (es_ES) female file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rele… 3/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 TTS Voice Language Language Indicator Options Swedish (sv_SE) female

*Polish and Greek are not supported on WORKABOUT PRO devices running Windows CE 5.0.

Polish and Greek are not support on WORKABOUT PRO devices running Windows CE 5.0.

When another application running on the device takes focus away from Vocollect Voice, or when Vocollect Voice is minimized, Vocollect Voice enters sleep mode.

The 7527 device contains a backup battery that protects your data in case the device’s primary battery fails. To get the best performance from your backup battery, before using your device for the first time, 1. Activate the backup battery. To do so, remove the main battery from the compartment and slide the switch under it to the On position. 2. Charge the device for 12 straight hours in order to fully charge the backup battery.

When performing enrollment training, you may find it useful to use the configurable parameter, TrainEnrollmentAudibleOnly. Setting this value to =1 allows the operator to train templates by speaking prompts that they hear spoken through their headset rather than by reading prompts from the device's screen.

[11005] A device may speak the task number when it should speak the task name. Workaround: Say, “Say again.”

[11075] Upon starting up Vocollect Voice for the first time after it was installed, the LED indicator on the device's display may not appear to be lit properly. The next time you perform an action that changes the device's status, the LED updates to the proper setting.

[11043] If a device is removed from maintenance mode or a charger while a task is loading, the device's LED flashes green, but no beep is heard until the task is fully loaded to the device. This may mislead the operator into thinking both a task and operator have been loaded. Workaround: Wait until you hear the "Task load complete" message, the status LED flashes red, and the device beeps. If an operator was already loaded prior to task load, it automatically reloads to the device. If no operator was loaded prior to task load, you must load one manually.

[11169] Do not reboot a device while DFU is taking place. If you do, the firmware will become corrupt, rendering the device unusable.

[11198] When replacing the battery in a device, it is possible that some of your task data could be lost if you do not change the battery in the correct manner. To change your battery during your shift without losing data from your task, perform the following steps: 1. Power off your WORKABOUT PRO. 2. Slide the two clips on the back of the WORKABOUT PRO to the unlock position. 3. Open the battery cover and remove the battery. 4. Place a charged battery into the battery compartment. 5. Replace the cover and slide the clips back to the locked position.

file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rele… 4/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 Note: When you are working, do not allow the device to remain without a battery for an extended period of time.

[11208] When pairing a new Bluetooth printer with a device that is already paired with another printer, you must exit and restart Vocollect Voice before pairing the new printer. If you do not, the original printer remains paired with the device. Workaround: Always tap Tools | Exit, and then restart Vocollect Voice before pairing a new Bluetooth printer.

[11209] When a device running Windows Mobile 6 has internal logging enabled, the device may take up to one minute and 30 seconds to fully shut down properly. This is due to the concurrent closure of several actions running on the device.

[11213] When installing VoiceClient on a device running Windows CE, the .cab file is not deleted during installation. The .cab file is small and can be left on the device.

[11220] When using a device running Windows CE with a paired Bluetooth scanner, the scanner might not automatically reconnect after the device has been inactive for a period of time. Workaround: Perform a warm boot of the device by pressing and holding the blue FN button and red ENTER button on the device for ten seconds.

[11240] If a scanner and printer are mistakenly assigned to the same COM port on a device, the scanner may scan barcodes incorrectly. Workaround: Before assigning a printer COM port in VoiceConsole, check the COM port assigned to the scanner so you do not assign the same one to the printer.

[11242] When removing a device from standby mode, it may take about 20 seconds for the device to become fully active.

[11246] If your task is supposed to print to a printer and the printer is powered off, pending print jobs queue but do not automatically print when you power the printer on. Workaround: You must restart Vocollect Voice in order for the pending print jobs to print. To do so, tap Tools | Exit, and then restart Vocollect Voice.

[11247] When using continuous sockets, a transaction with 514 bytes causes Vocollect Voice to enter an unresponsive state. Workaround: Insert or at the end as socket terminators so the transaction has more than 514 bytes.

[11248] Numeric fields in a LUT do not support more than 18 digits. Any digits beyond the eighteenth are disregarded and some data is lost.

[11254] By default, a new device in VoiceConsole is listed under the Unassigned category. Loading a new device profile does not update the device's site location and the device remains in the Unassigned category. Workaround : In VoiceConsole, manually change the site in the device's profile. See VoiceConsole Online Help for details.

[11268] When serial debug logging is enabled, debug output is stopped if the device enters standby mode. Workaround: Remove the device from standby mode, exit Vocollect Voice by tapping Tools | Exit, restart Vocollect Voice, and then restart serial debug logging.

back to top file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rele… 5/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 Printing and Scanning

Bluetooth printing and scanning

Internal scanners and imagers Bluetooth Printing and Scanning

Bluetooth printers supported on Windows Mobile and Windows CE devices

Zebra QL 220 Zebra QL 320 Zebra QL 420

Bluetooth scanner supported on Windows CE devices

Metrologic Voyager BT 9535

To enable Bluetooth scanning or printing on a device running Windows CE,

1. On a device running Windows CE, tap Start | Settings | Control Panel | Power. 2. Navigate to the Devices tab and ensure the Enable Bluetooth checkbox is checked. 3. Tap OK. When Bluetooth is enabled, the Bluetooth icon displays in the taskbar. 4. In the Control Panel, open Bluetooth Devices. 5. In the Devices tab of the Bluetooth Manager window, tap Scan. Wait while the device scans for Bluetooth peripherals within range. 6. When the device finishes scanning, find your peripheral by locating its Bluetooth address in the Address list. 7. Tap the name of your peripheral and then tap Services. 8. If you are pairing a printer, double-click Printer and select Outgoing from the popup box. If you are pairing a scanner, double-click Scanner and select Active from the popup box. The corresponding COM port appears under the Port column.

If you are pairing a printer,

9. Navigate to the Outgoing tab and ensure the Outgoing Port checkbox is checked. 10. Ensure the printer's COM port number matches the COM port number of the task package in VoiceConsole. After pairing a printer, the device's screen displays the paired printer's COM port number. Apply the configurable parameter PrinterPort to your task. Depending on what appears on your screen, use either PrinterPort="COMx" or PrinterPort="BSPx" with x as the number of your printer's COM port. See VoiceConsole Online Help for more information. 11. Load the updated task on your device.

To enable Bluetooth printing on a device running Windows Mobile,

1. On a device running Windows Mobile, tap Start | Settings | Connections | Bluetooth. 2. Navigate to the Mode tab and ensure the Turn on Bluetooth checkbox is checked. 3. On the Devices tab, tap Add new device and follow the onscreen prompts while it searches for your Bluetooth device.

file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rele… 6/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 4. Ensure the printer's COM port number matches the COM port number of the task package in VoiceConsole. After pairing a printer, the device's screen displays the paired printer's COM port number. Apply the configurable parameter PrinterPort to your task. Depending on what appears on your screen, use either PrinterPort="COMx" or PrinterPort="BSPx" with x as the number of your printer's COM port. See VoiceConsole Online Help for more information. 5. Load the updated task on your device.

Bluetooth Notes

At the end of your shift, disconnect any active Bluetooth pairing so that peripheral is free to pair with another device. To do so, deactivate the Enable Bluetooth or Turn on Bluetooth checkbox. If the peripheral with which you are trying to pair does not show up on the list of devices within range, that peripheral may already be paired with another device. Workaround: Disconnect the pairing and scan for the desired peripheral again. A Bluetooth scanner should beep when it pairs with a device. If you do not hear a tone, restart the WORKABOUT PRO.

Internal Scanners and Imagers

Internal Scanners

SE1223HP (pod)-(WA9000-G1) Displays on 7527 configuration screen as Symbol 1223 HP SE955 (pod)-(WA9002-G1) Displays on 7527 configuration screen as Symbol 955

Internal Imagers

EV15 (pod)-(WA9003-G1) Displays on 7527 configuration screen as Intermec EV15 HHP 5180 (pod)-(WA9012-G1) Displays on 7527 configuration screen as HHP IT4080

To enable internal printers or imagers,

1. Determine the manufacturer and model number of your device's internal scanner. This information is printed on the label on the back of your device. 2. Simultaneously press and hold the red Enter button, blue FN button, and large scan button on the main keypad for seven seconds. The device displays a text menu. 3. Press the large scan button to select the Configure internal scanner option. 4. Press the S button.

Note: If your scanner does not have a full keyboard, to enter S as your response you must press the orange FN button, the 7 button four times, and then the orange FN button again.

5. Enter the number under the Command column that corresponds with your device's scanner and press Enter. 6. When the menu returns to the command prompt, press 1 to reboot the device.

file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rele… 7/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 back to top Installing and Uninstalling Vocollect VoiceClient

Installing Vocollect VoiceClient on Psion Teklogix devices

Uninstalling Vocollect VoiceClient from Psion Teklogix devices Installing Vocollect VoiceClient

You must install files from the VoiceClient CD and load a configuration only device profile on to a device so the device can communicate with management software when the application is running. There are two procedures: initial configuration (the first time you install a VoiceClient file and load a configuration file to a device) and configuration update (changing a device's configuration file).

Installation of the full VoiceClient product requires a minimum of 12 Mb and a maximum of 100 Mb of available disk space. The actual disk space occupied by this product and the amount of temporary disk space required during installation and use will vary depending on how many of the localized versions of the application are installed and used.

Note: Vocollect recommends uninstalling all Vocollect Voice applications before installing this version of VoiceClient.

Note: The following procedures describe how to install VoiceClient on both Windows Mobile and Windows CE devices. Most steps are the same for both devices. Be sure to select the files that are compatible with your operating system.

Initial Configuration: Installing Management Software and Vocollect VoiceClient

IMPORTANT: VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO is only supported on Vocollect VoiceConsole 2.2 or newer.

Note: Make sure that your handheld synchronization software, such as Microsoft® ActiveSync®, is installed. Vocollect recommends that you connect the cradle for the handheld device to the computer that you are using to install these applications with a USB connector and then cradle the device.

Note: You can establish a serial cable or RF connection between your synchronization tool and the device in order to install Vocollect software, if you wish to do so. Vocollect recommends the use of a USB cable for speed and simplicity.

To install VoiceClient 1.1, perform the following steps:

1. Install VoiceConsole 2.2 or newer. 2. Create a folder in a location that is easy to access (for example, the desktop or a folder you have created) and name the folder appropriately. You will copy files from the Vocollect Voice for Handheld Devices CD- ROM to this folder. 3. Place the Vocollect Voice for Handheld Devices CD-ROM into your CD-ROM drive. 4. Open the CD.

A list of .cab files and executables displays.

5. Select all files (executables, .cab, .ddf, and .vrg files) and copy them to the folder you created in step 2. Close the CD-ROM. file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rele… 8/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 6. Determine which languages are to be installed at your site. See Language Indicators for supported languages and their extensions. You must have the appropriate license for each language in use at your site. See VoiceConsole online help for details about licenses.

Note: Steps 7 through 15 are for installations using Microsoft ActiveSync 4.5.0. If you are using a different synchronization tool, see Other Synchronization Tools.

7. Open the folder, and find the .cab file for the language at your site in the list of files that displays. 8. Drag the appropriate .cab file (for example, WAP7527_CE_VVoiceCabInstall_en_US.cab) onto the executable VocollectVoiceInstaller.exe.

The Installing Applications dialog box displays asking whether to install Vocollect Voice using the default application install directory.

9. In the Installing Applications dialog box, click Yes to install Vocollect Voice to the default location.

Note: You must click Yes. You cannot install the voice application to any other directory, nor can you install the voice application to the RAM Disk.

Installation begins, and a status bar tracks progress. When installation is finished, the Application Downloading Completed dialog box displays, and a progress indicator displays on the device screen.

10. Click OK in the Application Downloading Completed dialog box.

Note: If installation fails, check the amount of memory available in the handheld device flash memory. Installation of the full VoiceClient application on a device running Windows CE requires a minimum of 18 Mb flash and 18 Mb RAM. Installation of the full VoiceClient application on a device running Windows Mobile requires a minimum of 36 Mb flash.

11. In VoiceConsole, create a device profile with the VoiceConsole URL. When you have created the device profile, export the profile from VoiceConsole to a location that is easy to remember and easy to access (for example, the desktop or a folder you have created). See VoiceConsole online help for details about creating and exporting a device profile. 12. Open the folder you created in step 2. Find the device profile (profilename.vrg) you created in step 11, and drag it into PTX7527CEConfigFileInstaller.exe for devices running Windows CE, or PTX7527WMConfigFileInstaller.exe for devices running Windows Mobile.

The Installing Applications dialog box displays.

13. Click Yes in the Installing Applications dialog box.

The executable loads the device profile onto the handheld device. When finished, the Application Downloading Complete dialog box displays.

14. Click OK.

To install the voice application on a second device using ActiveSync:

1. Remove the first device from the cradle and cradle the second device. 2. On your desktop, open Microsoft ActiveSync. 3. Select Tools | Add/Remove Programs to open the CE Application Manager window. 4. Check both the Vocollect configvrg and Vocollect Voice checkboxes. Be sure the Install program into default installation folder checkbox is checked. 5. Click OK. The voice application and configuration-only device profile install. file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rele… 9/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 Note: To uninstall these files, follow steps 2 and 3. Uncheck the Vocollect config.vrg and Vocollect Voice checkboxes. Click OK. A message stating some components have not been deleted may display. This is standard and will not affect system operation.

6. Follow steps 1 through 5 to load the application and device profile to additional devices.

Note: This process is required only for initial configuration. Modifications to the device profile can be downloaded using VoiceConsole when a device is connected to the VoiceConsole application. See VoiceConsole Online Help for more information.

Initial Configuration: Other Synchronization Tools

1. Follow steps 1 through 5 in the installation section. 2. Open the folder that contains the .cab files and executables that you created, and find the .cab file for your site (for example, WAP7527_CE_VVoiceCabInstall_en_US.cab). 3. Use the synchronization tool to place the .cab file onto the handheld device in the \System directory on the device. 4. In VoiceConsole, create a device profile with the VoiceConsole URL. 5. Export the profile from VoiceConsole to a location that is easy to access (for example, your desktop or a folder you have created). VoiceConsole automatically assigns a .vrg extension to the exported device profile. See VoiceConsole online help for details about creating and exporting a device profile. 6. Browse to the location to which you exported the Vocollect Voice configuration file and rename the file config.vrg.

Note: The device profile you created in VoiceConsole will be retained in VoiceConsole with its original name.

7. Use the synchronization tool to place the config.vrg file into the \Storage\Vocollect Voice directory on the Windows Mobile device, or the \Flash Disk\Vocollect Voice directory on the Windows CE device.

Note: You must restart the voice application in order for the new device profile to be detected and used.

8. Repeat steps 2 through 7 for each additional handheld device you wish to configure.

Note: This process is required only for initial configuration. Modifications to the device profile can be downloaded using VoiceConsole when a device is connected to the VoiceConsole application.

See Vocollect Hardware Help and VoiceConsole online help for details about updating device profiles on handheld devices.

Configuration Update

Note: The following steps assume a prior installation of a configuration file (config.vrg).

1. For Windows CE, from the Start menu, select Settings | Control Panel. For Windows Mobile, from the Start menu, select Settings | System. 2. Select Remove Programs. 3. Highlight Vocollect configvrg from the list of installed programs. This step assumes that the configuration file on your device has been properly named config.vrg. 4. Select Remove. A Remove Programs dialog box displays. 5. Choose Yes to permanently remove the selected program.

file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rel… 10/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 6. Follow steps 11-14 under Installing Vocollect VoiceClient to install a new configuration file to your device.

Note: A message stating some components have not been deleted may display after uninstalling the VoiceClient configuration file. This is standard and will not affect system operation. Uninstalling Vocollect VoiceClient

VoiceClient can be uninstalled by performing standard Windows Add/Remove Programs procedures:

1. For Windows CE, from the Start menu, select Settings | Control Panel. For Windows Mobile, from the Start menu, select Settings | System. 2. Select Remove Programs. 3. Highlight Vocollect Voice from the list of installed programs. 4. Select Remove. A Remove Programs dialog box displays. 5. Click Yes to confirm you want to remove VoiceClient.

Note: A message stating some components have not been deleted may display after uninstalling VoiceClient. This is standard and will not affect system operation.

The following information applies to the software package included in VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO.

Expat XML Parsing Library

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Log4CPlus logging engine

Copyright© 1999 The Apache Software Foundation. All rights reserved. file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rele… 11/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The end-user documentation included with the redistribution, if any, must include the following acknowledgment: "This product includes software developed by the Apache Software Foundation (http://www.apache.org/)." Alternately, this acknowledgment may appear in the software itself, if and wherever such third-party acknowledgments normally appear. 4. The names "log4j" and ''Apache Software Foundation'' must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact [email protected]. 5. Products derived from this software may not be called "Apache", nor may "Apache" appear in their name, without prior written permission of the Apache Software Foundation.

THIS SOFTWARE IS PROVIDED "AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes software developed by the Apache Software Foundation (http://www.apache.org/).

Software License Agreement for CSR DFU Engine and Wizard

This Software license Agreement (“Agreement”) is entered into between Cambridge Silicon Radio Limited having a place of business at Unit 400, Cambridge Science Park, Milton Road, Cambridge CB4 0WH (“CSR”) and Vocollect, Inc. having a place of business at 703 Rodi Road, Pittsburgh, Pennsylvania 15235 (“Licensee”) on the 13 day of December 2007 (“Effective Date”).

1. GRANT OF license CSR hereby grants Licensee under the terms of this Agreement a worldwide royalty- free non-exclusive license to use and copy the DFU Engine and Wizard software (“Software”) under the following conditions:

i. The Software shall only be used in conjunction with CSR chips; and ii. The source code of the Software shall be treated as confidential information of CSR and only distributed to third parties after CSR has granted its consent in writing; and iii. Licensee agrees to supply, and grants a non-exclusive license to CSR to use for any purpose whatsoever, any and all bug fixes Licensee makes to the Software; and iv. Licensee accepts that ownership of all intellectual property rights in the Software shall remain with CSR.

Boost Software License - Version 1.0 - August 17th, 2003

Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying documentation covered by this license (the "Software") to use, reproduce, display, distribute, file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rel… 12/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 execute, and transmit the Software, and to prepare derivative works of the Software, and to permit third-parties to whom the Software is furnished to do so, all subject to the following:

The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer, must be included in all copies of the Software, in whole or in part, and all derivative works of the Software, unless such copies or derivative works are solely in the form of machine- executable object code generated by a source language processor.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Vocollect has provided complete product reference information in the online help provided with VoiceConsole. To view the online help, select the Help | Contents and Overview option on the application's navigation bar.

Note: If you purchased Vocollect equipment from a Vocollect reseller, please contact the reseller.

To contact Vocollect Americas:

Customer Service Email: [email protected]

Customer Service Phone (US): 1.866.862.6553

Customer Service Phone (Outside the US): 412.829.8145

To report Vocollect system support incidents or related technical issues, contact the Technical Support Center at:

Technical Support Email: [email protected]

Technical Support Phone (US): 1.866.862.7877

Technical Support Phone (Outside the US): 412.829.8145

To contact Vocollect Europe, Middle East, and Africa:

Customer Service Email: [email protected]

Customer Service Phone: +44(0) 1628.55.2903

Technical Support Email: [email protected]

Technical Support Phone: +44 (0) 1628.55.2902

For sales or any other inquiry, please contact Vocollect at [email protected] or 412.829.8145. file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rel… 13/14 11/16/2018 Vocollect VoiceClient 1.1 for Psion Teklogix WORKABOUT PRO 7527 Vocollect Corporate Headquarters

703 Rodi Road Pittsburgh, PA 15235-4558 USA t) 412.829.8145 f) 412.829.0972 w) www.vocollect.com e) [email protected]

Vocollect Europe

Gemini House Mercury Park Woodburn Green High Wycombe United Kingdom HP10 0HH UK t) +44 (0)870.600.8255

Note: The e-mail links on this page work only if this computer is connected to the Internet and configured to launch e-mail when you click mailto links. If you have questions, please contact your system administrator.

© 2008 Vocollect, Inc. All rights reserved. Vocollect product and company names, including Vocollect®, Vocollect VoiceClient®, Vocollect Voice®, Talkman®, Vocollect VoiceConsole®, and SR-Series Vocollect® Headsets, as well as their respective logos are trademarks or registered trademarks of Vocollect, Inc. Psion Teklogix®, WORKABOUT PRO® are registered trademarks of Psion Teklogix, Inc. All other product names mentioned herein are trademarks or registered trademarks of their respective owners.

file:///C:/techpubs/VoiceSoftwareGuide_Flare/Content/ReleaseNotes/VoiceClientMP/Vocollect_VoiceClient_1_1_for_WORKABOUTPRO_7527_Rel… 14/14