DOCSLIB.ORG

Centerfire Firearms

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Centerfire Firearms CENTERFIRE FIREARMS AR10(T) 260 REMINGTON SLR-107F This is ArmaLite’s legendary “T” to a “tee”. Its 22” Import, 7.62x39 caliber, stamped receiver, C stainless steel Match barrel and National Match trig- chrome lined hammer forged barrel, bayonet lug, 24mm muzzle ger perfectly complement the flat shooting, ultra-accu- brake, cleaning rod, accessory lug, black polymer furniture, Left-side E rate .260 Remington cartridge. Dead on accuracy. Especially suited folding polymer stock, stainless steel heat shield. Comes with one 5- N for younger or novice shooters because of its low recoil. round magazine, sling, oil bottle, and cleaning kit. T E R F SCOPE NOT INCLUDED I Order No. Mfg.# Description Retail $ R 4 2436-0036 10TBNF2 RIFLE W/FORWARD ASSIST 22" SS 1829.99 E *2436-00434 10TBNF 7.62/308 20" BLK TGT FORWARD AS 1829.99 Order No. Mfg.# Description Retail $ *4724-00014 SLR107-21 FOLDING BUTTSTOCK 5RD MAGAZINE 1149.99 M-15 SPR MOD 1™ LE SGL21 SERIES Special Purpose Rifle (SPR). The SPR Mod 1 is forged, one-piece upper receiver/rail system with Russian made stamped receiver, 7.62x39 caliber, exclusive detachable side and bottom rails. In true 16" hammer forged chrome lined barrel, front sight block with bayo- ArmaLite fashion, the SPR Mod 1 is like no other on the market. net lug and 24x1.5 right-hand threads, accessory lug, muzzle brake, With other one-piece systems, you're stuck forever with the rails you standard mil-spec. handguards with stainless steel heat shield, poly- get at purchase, and stuck with their limits. But ArmaLite knows you mer furniture with Warsaw Pact or NATO length buttstock, U.S. made and your firearm often have more than one mission, and you want double stage fire control group, 1000 meter rear sight leaf, scope rail, options. ArmaLite gives you just that. The SPR Mod 1's three and comes with a 5-rd magazine. o'clock, six o'clock, and nine o'clock rails are detachable. That's right, you can change your 1913 rails to fit your changing needs for sights... lights...lasers...grips...or swivels. ArmaLite takes that versa- tility even further. Each SPR Mod 1 comes with three extra rails standard, at no extra cost. We give you a 1913 rail with quick detach sling swivel hole. Each rifle comes with a low insert for when you need a bare rail with a low profile. There's also a plain insert with a Order No. Mfg.# Description Retail $ quick detach sling swivel hole. Changing your rails...your add- 4 ons...and your SPR Mod 1... is as easy as turning a torque wrench. *4724-0002 SGL21- WARSAW BUTTSTOCK 5RD MAGAZINE 969.99 *4724-00034 SGL21- WARSAW BUTTSTCK RAIL 5RD MAGAZI 1089.99 *4724-00044 SGL21- NATO BUTTSTOCK 5RD MAGAZINE 969.99 SGL23-61 SERIES CA COMPLIANT Russian made stamped receiver, 7.62x39 caliber, 16" hammer forged chrome lined barrel, front sight block with bayo- Order No. Mfg.# Description Retail $ net lug and 24x1.5 right-hand threads, accessory lug, muzzle brake, 4 2436-0038 15SPR1L SPR MOD 1 MONOLITHIC 6" LEC 16" 1519.99 standard mil-spec. handguards with stainless steel heat shield, poly- mer furniture with Warsaw Pact or NATO length buttstock, U.S. made M-15A4 223 CARBINE double stage fire control group, 1000 meter rear sight leaf, scope rail, The ArmaLite M-15A4 SPR line is an efficient plat- and comes with a 5-rd magazine. California legal. form on which to build mulitiple sighting options. The M15A4 offers the flexibility of the Picatinny rail applied to the time-honored service rifle model. Light recoiling and dead on accurate, the M15A4 Special Purpose Rifle line accepts ArmaLite's removable iron front sight, carry handle or scope mounts as well as other devices conforming to the MIL STD 1913(Picatinny) rail. Order No. Mfg.# Description Retail $ *4724-00054 SGL23-61 WARSAW BUTTSTOCK 10RD MAG 969.99 SGL31-61 Order No. Mfg.# Description Retail $ Russian made stamped receiver, 5.45x39.5 cali- 4 2436-0039 15SPR1C SPR MOD 1 MONOLITHIC 8" LEC 16" 1549.99 ber, hammer forged chrome lined barrel, front sight block with bayo- net lug and 24x1.5 right-hand threads, muzzle brake, US made mil- AR-10(T)™ CARBINE spec black polymer stock set, standard mil-spec. handguards with Combines the light weight and compact size of the stainless steel heat shield, US made double stage trigger group, carbine with the accuracy of the target model to give 1000 meter rear sight leaf, scope rail, accessory lug. 10rd. Russian you a rifle that outperform all other carbines. You will magazine included. be ready on your next hog hunt with the light weight configuration and match stainless steel barrel chambered in 7.62 NATO. SCOPE NOT INCLUDED Order No. Mfg.# Description Retail $ Order No. Mfg.# Description Retail $ 4 2436-00404 10TCBNF CARBINE BLACK WITH FORWARD 1829.99 *4724-0006 SGL31-6 WARSAW BUTTSTOCK 10RD MAGAZINE 1049.99 Call your Sales Representative for current gun prices. BRS West ’12 - ’13 3 * Denotes New Products.
Load more

Recommended publications
  • The AK47: Full Auto Conversion for Dummies by Royi “Uncle Ro” Eltink Author of “Uncle Ro’ Extreme Survival” and “The Paramilitary Commando” Series
    The AK47: Full Auto Conversion for Dummies By Royi “Uncle Ro” Eltink Author of “Uncle Ro’ Extreme Survival” and “The Paramilitary Commando” series. Disclaimer: This is for educational purposes only! The author fully disclaims anything the reader does with this information. In some countries and places this information can be prohibited by law, you act on your own responsibility now. An AK47 and his happy owner Preamble The AK47 has an long and infamous history, as the world’s bestseller on the gun market, it has seen every conflict since its introduction in 1947. It is cheap, easy to manufacture and maintain and anyone who can hold a rifle and pull a trigger can be an expert on this weapon in an half hour. Of course, every respectable nation on this planet has build one or two versions of the Russian rifle, famous are the Chinese, German, Finnish (Valmet), Israeli (Galil), South-African and the Dutch…..and many more I did not mention. Let’s begin with an wishlist Of course, you cant just read this thing and finish reading and ending up with an full auto AK.. You have to get you’re hands on a couple of things first. You need the normal civil, sports, version of the AK47 or an AKM. Further you might want to have: - Proper license for all these things, and the thing you are going to build - Full auto parts set, I will point out how to make an template to fit these in. - Full auto bolt carrier in those models who don’t have one.
    [Show full text]
  • Rings & Bases 249-269
    ALLCHIN S&W REVOLVER MINI STS HIGH STANDARD TARGET PISTOLS RINGS & BASES INDEX SCOPE MOUNT UNIVERSAL SCOPE MOUNT Fitting & Custom Components ...268-269 Rifle ..........................251-268 Mount A Mini Red Dot On Any Factory Part Ensures A RINGS & BASES Handgun ...................... 249-250 Shotgun ........................250-251 Pre-Drilled S&W Revolver Perfect Fit Easy-to-install mount lets you Lightweight alumi- upgrade any pre-drilled S&W revolver num mount with multiple WEIGAND COMBAT with a small red dot sight. Machined cross-slots for Weaver-style rings allows proper scope eye relief. aluminum construction offers durability Weighs only 2 oz., won’t affect balance. TORX screws resist strip- ® recoil pins to prevent “scope flyoff," and and weight savings. Mount body align- ping. Requires no gunsmithing. ab HANDGUN SCOPEMOUNTS 1 accepts Weaver-style rings or mount ment holes accept C-More STS, Burris SPECS: Aluminum, Hard Anodized Finish. 6" (15.2cm) x /2" (12.7mm). Wt TAURUS TRACKER SCOPE MOUNT systems such as used on Tasco 40mm Fastfire, JPoint, Optima 2000, Leupold Delta Point, Sig and most = 2 oz, Black. Fits: Olympic OM, M Grip, .22 Short; Supermatic Citation - Precision-machined, aluminum red dot optics. Super Redhawk .44 other small red dot sights. Positions red dot over the rear sight and SC-M, M Grip, .22; Supermatic Tournament SK-M, M Grip, .22; Supermatic scope mount accepts Weaver-style Mag fits only the .44 Magnum and can as close to the bore as possible for fast target acquisition. ab Trophy STR-M, M Grip, .22; Victor VCT-M, M Grip, .22 rings to let you mount a scope on your be installed without removing the front and rear sights.
    [Show full text]
  • Weaver Mounts Chart
    WEAVER MOUNTS CHART WEAVER Top Mount Ring Height Guide Dovetail Ring Height Guide Ring Size Saddle Height Fits Objective Ring Size Saddle Height Fits Objective 1" Low 0.089 Thru 38mm 1" Low 0.150 Up to 40mm 1" Medium 0.169 Thru 40mm 1" Medium 0.270 Thru 50mm 1" High 0.332 Thru 44mm 1" High 0.400 Thru 56mm 1" X-High 0.560 Thru 50mm 1" X-High 0.520 Over 56mm 1" See-Thru 0.750 Thru 50mm 30mm Medium 0.320 Thru 56mm 30mm Low 0.288 Thru 33mm 30mm High 0.490 Over 56mm 30mm High 0.500 Thru 44mm 1" Medium .22 Rings 0.262 Thru 40mm 1" Tip-Off 0.250 Thru 36mm 1" High .22 Rings 0.392 Thru 44mm 1" Tip-Off See-Thru 0.750 Thru 50mm 1" X-High .22 Rings 0.512 Thru 50mm Note: Chart applies to Grand Slam, Sure Grip, Detachable, Quad Lock and Lever Lok 1" Medium Mod 77/22 & No 1 0.453 Thru 50mm Rings. 1" Medium Mod 77 Stepped Thru 50mm 1' High Mod 77 Stepped Thru 56mm Note: Chart applies to Dovetail Rings. Tactical Style Ring Height Guide Ring Size Saddle Height Fits Objective Ring Size Saddle Height Fits Objective 1" Med .280" Thru 40mm 30MM High .490" Thru 44mm 1" High .400" Thru 44mm 30MM X-High .610" Thru 56mm 1" X-High .520" Thru 50mm 34MM Low 0.327 Thru 24mm 1" XX-High .640" Thru 56mm 34MM High .0.577" Thru 44mm 30MM Low .250" Thru 38mm 34MM XX-High 0.827" Thru 56mm 30MM Med .370" Thru 40mm ® SIDE GRAND SLAM® GRAND SLAM® WEAVER® ALUMINUM TOP MOUNT BASES MULTI-SLOT BASES STEEL LOCK COMPLETE WEAVER MOUNT SEE-THRU MOUNT MOUNT STEEL TOP MOUNT BASES DOVETAIL BASES APPLICATIONS CHART RINGS SYSTEMS NOTES STANDARD 2-PC BASES EXTENSION BASES 1-PC 1-PC 1-PC USE
    [Show full text]
  • (12) United States Patent (10) Patent N0.: US 6,594,938 B2 Horton (45) Date of Patent: Jul
    US006594938B2 (12) United States Patent (10) Patent N0.: US 6,594,938 B2 Horton (45) Date of Patent: Jul. 22, 2003 (54) FRONT INTERFACING DETACHABLE 5,941,006 A * 8/1999 Horton ...................... .. 42/124 SCOPE MOUNT 6,250,008 B1 * 6/2001 Silver ...................... .. 42/70.01 6,269,577 B1 * 8/2001 Hardy . .. 42/127 (76) Inventor: JohnMonnceno’ ' Wiley FL(US)Horton, 32344430 Satsuma Ave., 6,427,374 B1 Z:* 8/2002 giwonskiVaianiaumann ......................... e a ~. ~ ~ ~ ~ ~~ .. 42/85 ( * ) Notice: Subject to any disclaimer, the term of this FOREIGN PATENT DOCUMENTS patent is extended or adjusted under 35 U_S_C_ 154(k)) by 0 days' W0 WO 99/63295 * 12/1999 * . (21) Appl. N0.: 09/963,852 cued by exammer (22) Filed: Sep_ 26’ 2001 Primary Examiner—Michael~ J. Carone Assistant Examiner—John Richardson (65) Prior Publication Data (74) Attorney, Agent, or Firm—J. Wiley Horton US 2003/0056417 A1 Mar. 27, 2003 (57) ABSTRACT (52) US. Cl. ................................ ... 42/127;. .. 42/72; 42/90; AOperated using only one alatching mechanism_ The mount 42/124; 42/125; 42/126; 42/141; 42/111; uses a front base attached to the ring of a ri?e receiver and 89/3704; 89/3709; 89/3713; 89/3716 a rear base attached to the bridge of a ri?e receiver. The of Search ............................ .. 90, upper surfaces of both the front and rear bases Open into a ‘12/125, 126, 127, 111, 141; 89/3704, 3709, pair of slots. A separate scope mount is attached to a scope 37-13, 37-16 sight by conventional means. TWo sets of lugs descend from the loWer surfaces of this scope mount.
    [Show full text]
  • AB 879 Hearing Date: June 25, 2019 Author: Gipson Version: June 17, 2019 Urgency: No Fiscal: Yes Consultant: GC
    SENATE COMMITTEE ON PUBLIC SAFETY Senator Nancy Skinner, Chair 2019 - 2020 Regular Bill No: AB 879 Hearing Date: June 25, 2019 Author: Gipson Version: June 17, 2019 Urgency: No Fiscal: Yes Consultant: GC Subject: Firearms HISTORY Source: Author Prior Legislation: AB 2382 (Gipson), 2018, held in Senate Appropriations AB 857 (Cooper), Ch. 60, Stats. of 2016 AB 1673 (Gipson), 2015, vetoed Support: Brady California United Against Gun Violence; California Department of Justice; Giffords Law Center; Los Angeles County Board of Supervisors; Los Angeles County District Attorney’s Office; Women Against Gun Violence; Youth Alive Opposition: California Rifle and Pistol Association; California Sportsman’s Lobby; National Shooting Sports Foundation; Outdoor Sportsmen’s Coalition of California; Safari Club International; Safari Club International Foundation Assembly Floor Vote: 45 - 21 PURPOSE This purpose of this bill is to require, commencing July 1, 2024, that the sale of firearms precursor parts be conducted through a licensed firearms precursor part vendor. Existing law requires licensed importers and licensed manufacturers to identify each firearm imported or manufactured by using the serial number engraved or cast on the receiver or frame of the weapon, in such manner as prescribed by the Attorney General (AG). (18 U.S.C. § 923, subd. (i).) Existing law specifies that the United States Undetectable Firearms Act of 1988 makes it illegal to manufacture, import, sell, ship, deliver, possess, transfer, or receive any firearm that is not as detectable by walk-through metal detection as a security exemplar containing 3.7 oz. of steel, or any firearm with major components that do not generate an accurate image before standard airport imaging technology.
    [Show full text]
  • Gunsmithing Price List
    Gunsmithing Price List General Labor Rates Inspect and Prepare quote Free Boresight Scope $15.00 Mount and Boresight Scope $25.00 Minimum Shop charge $40.00 Labor by Hour $80.00 General Services Complete Cleaning (DCOA disassemble, clean, oil, assemble) $60.00 Rust Removal / Excessively Dirty +$20.00 Zero Rifle at range (not including ammunition or rage fees) $60.00 Trigger Work starts at $80.00 Stock Services Inlet & Glass Bed semi inlet stock $80.hr Install Aluminum pillars and glass bed $120.00 Glass Bed Finished Stock $100.00 Install Swivel Studs $50.00 Inlet stock for new bolt handle $60.00 Fit & Install Recoil Pad (not including price of pad) $45.00 Muzzle Brakes Remove & Reinstall New Brake or Silencer $40.00 *If very hard to remove, i.e. red Loctite +$20.00 1.16.18 Wood Refinishing by Style Hand rubbed oil finish High gloss leaving grain of wood open $200.00 Hand rubbed oil finish High gloss completely filling the grain $320.00 Sprayed on oil, Satin finish open grain $140.00 Sprayed on oil, Satin finish filled grain $220.00 Sprayed on oil, High Gloss filled grain $300.00 Each of the following is an additional charge of $40.00 and will be assessed at the standard labor charge Oil soaked stocks Removal of Large dents Crack repair Stripping epoxy Staining 1.16.18 --------------------------------------------------------------------------------------------------------------------- Metal Finishing Black Oxide and Parkerizing: (Includes disassembly, abrasive blasting and reassembly) Pistols: $120.00 Rifles/Shotguns: $175.00 Removing scratches and pitting: $80/hour Bluing: (Includes disassembly, abrasive blasting and reassembly) Pistols (Matte Finish): $150.00 (Semi): $180.00 (High Polish): $200.00 Rifles/Shotguns (Matte Finish): $200.00 (Semi): $250.00 (High Polish): $300.00 *Matte Finish is minimal scratch/pitting removal and abrasive blasting before the bluing process.
    [Show full text]
  • Fabdefence.Pdf
    2012 2-15 grips 16-29 rail systems 30-33 K-pos 34-45 Buttstocks 46-53 TACTICAL FLASHLIGHT ADAPTORS 54-59 Magazine accessories 60-69 parts & upgrades 70-71 Self-Healing Targets 72 index gripsTarget Accuracy AG-43 AGF-43S AR15/M16 Pistol Grip Tactical Folding Pistol Grip for-M16-M4-AR15 Finger Swelts and a Backstrap Shape Designed to Enhance Transforms a Horizontal Positioned Grip to Vertical Position Grip, Even when Wet Weapon Fits Easier in Gun Case and on Weapon Rack Extended Beavertail for Better Control, Allowing a Higher Firmer Hold Provides Easier Maneuverability, more Convenient for Undercover Readily Accessible Storage Area with Securely Sealed Hinged Door Work and Concealment MIL-SPEC Reinforced Polymer Composite Easier and Faster Vehicular Deployment Available in Black and Two Camouflage Colors: Olive Drab Green and Desert Tan Quick Fold/Unfold Button Made From Reinforced Polymer Composite 04 Grips AG-47 AG-58 SG-1 Ergonomic Pistol Grip for AK-47/74 SA. VZ. 58 Pistol Grip Sniper Pistol Grip Advanced Ergonomic Design Prevents Unique Texture Prevents Slipping Replaces Standard Pistol Grip To Provide Wrist Fatigue and Ensures Secure Grip in When Wet Greater Comfort and Operational Control Wet Conditions Advanced Ergonomic Design Advanced Ergonomic Design Improves Trigger Operation Built-In Storage Compartment Adjustable Palm Swell Style Grip Built-In Storage with Removable Enhances Finger to Trigger Correspondence Adapts Easily To Various Sized Hands Cushioned Battery Holder Tough Material & Design Applies Pressure to the Palm of the Hand Manufactured with MIL-SPEC Reinforced Available in Black and Two Camouflage Allowing Deliberate and Measured Polymer Composite Colors: Olive Drab Green, and Desert Tan Trigger Pull Available in Black and Two Camouflage Tough Material & Design Colors: Olive Drab Green, and Desert Tan Available in Black 05 Grips agr-870 agm-500 wg-1911 Remington 870 Pistol Grip Mossberg 500 Pistol Grip 1911 Mag.
    [Show full text]
  • Keymod™ Vs. M-LOK™ Modular Rail System Comparison
    CAPT JT Elder Commanding Officer NSWC Crane KeyMod™ vs. M-LOK™ Modular Rail System Comparison Dr. Brett Seidle, SES Abstract #19427 Technical Director NSWC Crane Presented By: Caleb McGee Date: 4 May 2017 Distribution Statement A – approved for public release; distribution unlimited Background History • The MIL-STD-1913 Accessory Mounting Rail was standardized in 1995. • MIL-STD-1913 Quad-rail Handguards currently in use. – MK18 Mod 1 Carbine. – Upper Receiver Group (URG). • Industry developed, low profile handguards with “as needed” accessory mounting panels. – Rail panels can be positioned using holes machined into the handguard. Distribution Statement A – approved for public release; distribution unlimited Background KeyMod™ • Originated by VLTOR Weapon Systems and released in 2012. • Developed as a standardized accessory mount platform. • Supports direct mounting of accessories and 1913 accessory rail sections. • Current civilian market moving towards direct mounting of accessories. • KeyMod™ accessories interface with KeyMod™ handguards by: – Inserting mounting nuts of accessory through the large portion of the KeyMod™ slot. – Sliding the accessory fully forward in smaller front portion of key shaped slot. – Tightening accessory bolts to secure in place. Distribution Statement A – approved for public release; distribution unlimited Background M-LOK™ • Originated and released by MAGPUL in early 2015. • MAGPUL cites improved performance in polymer accessories using M-LOK™. • Allows for mounting of accessory rails to low-profile handguard designs. • Functions by passing mounting T-nuts on an accessory through the slots in the handguard. • Tightening the accessory bolts rotates the T-nuts to rotate 90° and lock, allowing the bolts to be torqued. Distribution Statement A – approved for public release; distribution unlimited Overview Objectives • Qualitative and quantitative comparisons of both the KeyMod™ and M-LOK™ accessory mounting systems.
    [Show full text]
  • Model 95 Operator’S Manual Model 95 Table of Contents
    MODEL 95 OPERATOR’S MANUAL MODEL 95 TABLE OF CONTENTS 2 MANUFACTURER’S DISCLAIMER 2 USE OF THE MANUAL 3 SAFETY GUIDELINES 5 WARRANTY AND SERVICE 6 DESCRIPTION OF FIREARM 6 BREAK-IN PROCEDURE 6 SPECIFICATIONS 7 MAJOR COMPONENTS 7 SAFETY MECHANISM 8 BIPOD OPERATION 8 LOADING AND FIRING 11 CYCLING THE ACTION 11 UNLOADING AND CLEARING 12 UNLOADING MAGAZINE 12 DISASSEMBLY AND ASSEMBLY 19 CLEANING AND LUBRICATION 20 GENERAL MAINTENANCE 22 TROUBLESHOOTING 24 EXPLODED VIEW 26 PARTS LISTS MODEL 95 MANUFACTURER’S DISCLAIMER BFMI will not be responsible for injury, death, or damage to property resulting from either intentional or accidental discharge of this firearm or from its function when used for purposes or subjected to treatment for which it was not designed. BFMI will not honor claims involving this firearm which result from careless or improper handling, unauthorized adjustment or parts replacement, corrosion, neglect, the use of the wrong caliber ammunition, or the use of other than commercially manufactured ammunition in good condition, or any combination thereof. USE OF THIS MANUAL Read this manual before you use or manipulate your Barrett product. It is important that you understand the principles of safe gun handling in general and the features of this product. This manual is not a substitute for training from a qualified instructor. Important safety topics are discussed in this chapter and throughout this manual. This manual should remain with the product and it should be transferred with the product to subsequent owners. Additional manuals can be ordered from Barrett Firearms Manufacturing or can be downloaded from the company website, barrett.net.
    [Show full text]
  • Rings & Bases 258-278
    WEIGAND COMBAT RINGS & BASES INDEX ® HANDGUN SCOPEMOUNTS RUGER SINGLE SIX - No-drill, no-tap Fitting & Custom Components........ 278 Rifle.......................... 259-278 mount attaches to frame at the rear TAURUS TRACKER SCOPE MOUNT - Precision-machined, alu- sight screw. Contoured recoil lug fits Handgun ...................... 258-259 Shotgun............................ 259 minum scope mount accepts in rear sight slot to prevent movement. Weaver-style rings to let you Accepts Weaver-style rings. Use on .22 mount a scope on your Taurus LR only, not for use on .32 Magnum guns. ab 1 Tracker. Also great for red-dot SPECS: Extruded aluminum, black or silver, anodized, matte finish. 4 /2" 7 optics. Integral recoil lug fits (11cm) long, /8" (22mm) wide, 1.3 oz. (38 g) wt. Includes mounting screws. into rear sight notch for a rock #957-000-043 Silver Single Six Mount, 7E33L29 . $ 36.99 ALLCHIN S & W R E V O LV E R M I N I S T S LSP S&W 41 LONG SCOPE BASE solid hold that prevents scope movement. Requires removing rear #957-000-042 Black Single Six Mount, 7E33F29 . 36.99 sight. No drilling or tapping required. ab RINGS & BASES 1 5 SCOPE MOUNT SPECS: Aluminum, silver, matte finish. 4 /2" (11.4cm) long, /16" (7.8mm) high S&W REVOLVER - Low profile and Extra Long For from bottom to top of mount. 1.3 oz. (36.8g) weight. Includes mounting Precise Eye Relief lightweight. Fits newer, factory drilled Mount A Mini Red Dot On Any screws. Fits .22 LR, .22 Mag, .17 HMR. and tapped K, L and N frame revolvers; Pre-Drilled S&W Revolver Six inch long rail lets #957-000-076 Tracker Scope Mount, 7E32B29 .
    [Show full text]
  • C39v2 the AMERICAN AK Century Arms Introduced the First 100% American Made AK Rifle to the Market 5 Years Ago
    C39v2 THE AMERICAN AK Century Arms introduced the first 100% American made AK rifle to the market 5 years ago. We are excited to now offer the newest addition to the C39 line of rifles, the new C39v2, the American AK. It is 100% American made with no imported parts, built on a milled receiver machined from a solid 11 lb. block of 4140 ordnance quality steel. Enhancements include a T shaped magazine catch, compatibility with AKM furniture, a bolt hold open safety, an enhanced dust cover and standard AK sights. The C39v2 is coated with black nitrite and uses a new enhanced trigger group. The C39v2 barrel has a concentric left hand 14x1 metric thread and is ready for a variety of muzzle attachments. SPECS Caliber: 7.62x39mm Barrel: 16.5” with a 1:10 twist Barrel Thread: 14x1 LH Overall: 37.25” Weight: 8.2 lbs. Receiver: Milled 4140 steel Mag. Capacity: 30 rounds Comes with: Two 30 round Magpul magazines and a 1 year manufacturer’s warranty Country of Mfr: USA Product Code: RI2245-N RI2245CA-N California Compliant centuryarms.com 800.527.1252 RAS47 Born overseas and perfected in the USA, the all new 100% American made stamped AK, RAS47, is now available. Features a T shaped magazine catch, compatibility with AKM furniture, slant muzzle brake, side scope rail, bolt hold open safety, an enhanced dust cover and has standard AK sights. The RAS47 is coated with black nitrite and uses a new enhanced trigger group. SPECS Caliber: 7.62x39mm Barrel: 16.5” with a 1”10 twist Barrel Thread: 14x1 LH Overall: 37.25” Weight: 7.8 lbs.
    [Show full text]
  • Engineered Capacity
    ENHANCED PRESSURE DEVICE For increased reliability (this is NOT a silencer). MATCH GRADE BARREL Threaded to 1/2-28 for common muzzle devices or silencer attachment. MONOLITHIC UPPER RECEIVER Streamlined top rail featuring M-LOK compatibility. 10/22® MAGAZINE COMPATIBILITY The Rebel .22 accepts the commonly available 10/22® magazine of various Engineered capacity. ENTERTAINMENT INJECTION MOLDED LOWER RECEIVER Featuring familiar AR-15 controls. .22 LR JUST GOT BETTER, AND MORE FUN. Get ready for the most fun you’ve had with a .22LR. Brand new for 2020 we bring you the Rebel. To say that we are extra excited about this one would be an understatement. We have yet to have someone shoot the Rebel and not walk away with a big smile. Our love of shooting, training, and prepping future shooters were the driving factors of development. We had to bring a quality to this platform which hasn’t been seen before. Aside from its light weight, the Rebel is equipped with a Mission First Tactical pistol blade and threaded barrel with thread protector. The receiver accepts AR-15 pattern stock and brace options, and the trigger and selector are also compatible with AR-15 options. The Rebel .22 features a monolithic upper receiver and injection molded lower receiver. To top it off, it accepts the widely available 10/22® magazine. BLACK REBEL CAL. BBL. HANDGUARD WGT. COLOR/PART # Pistol .22LR 8” Monolithic M-LOK 3.3 lbs Black Anodized: #01664 *Specs and furniture are subject to change. Weight is based on empty gun. Patriot Ordnance Factory Patriots to the core.
    [Show full text]