Engineering Specification Signalling

CRN SE 003 SIGNS, NOTICE BOARDS & INSTRUCTION PLATES

Version 2.0 Issued July 2021

Owner: Principal Signal Engineer Approved by: Jason Leonard Authorised by: James Zeaiter

Disclaimer. This document was prepared for use on the CRN Network only. John Holland Rail Pty Ltd makes no warranties, express or implied, that compliance with the contents of this document shall be sufficient to ensure safe systems or work or operation. It is the document user’s sole responsibility to ensure that the copy of the document it is viewing is the current version of the document as in use by JHR. JHR accepts no liability whatsoever in relation to the use of this document by any party, and JHR excludes any liability which arises in any manner by the use of this document. Copyright. The information in this document is protected by Copyright and no part of this document may be reproduced, altered, stored or transmitted by any person without the prior consent of JHR.

UNCONTROLLED WHEN PRINTED Page 1 of 36

CRN Engineering Specification - Signalling CRN SE 003 Signs, Notice Boards & Instruction Plates

Document control

Revision Date of Approval Summary of change 2.2 July 2005 RIC Standard SC 00 24 00 00 Version 2.2 July 2005. 1.0 May 2011 Conversion to CRN Standard CRN SE 024. 1.1 March 2015 Merge and combine with CRN SC 024 – same title and content and update as required 1.2 June 2017 Update Shunt Limit sign examples 2.0 July 2021 Add level crossing and TOW signage

Summary of changes from previous version

Section Summary of change 7.0 Added Train Order Working signage 8.0 Added general level crossing location signage

Contents 1 General ...... 5 1.1 Introduction ...... 5 1.2 Referenced Documents ...... 5 1.3 Form of Lettering ...... 5 2 Materials ...... 6 2.1 Dimensional Tolerances ...... 6 2.2 Reflectivity ...... 6 2.3 Mounting ...... 6 3 List of Current Signs and Plates ...... 7 4 Mandatory or Hazard Signs and Notice Plates ...... 9 4.1 STOP Sign ...... 9 4.2 Electric Trainstop Boards ...... 9 4.3 Pantograph Down Board ...... 10 4.4 Electric Trains Point Clearance Sign ...... 10 4.5 Electric Trains Prohibition Boards ...... 11 4.6 Derail Sign ...... 11 4.7 Catch Point Sign ...... 12 4.8 Block Joint Sign...... 12 4.9 Limit of Shunt Sign ...... 13 5 Safeworking Instruction Boards ...... 14 5.1 Prohibitive Boards ...... 14 5.2 Semi-Automatic Signal Board ...... 14 5.3 Automatic Signal Board ...... 15 5.4 Slip Boards ...... 16 5.5 Distant Signal Boards ...... 16 5.6 Begin and End Single Light Indication Boards ...... 17 5.7 Tonnage Instruction Boards ...... 17 6 Miscellaneous Notice Boards ...... 18 6.1 Advisory Speed Boards ...... 18 6.2 Special Speed Board Metropolitan Area ...... 19 6.3 Yard Limit Signs ...... 20 6.4 Repeat Signal Plate ...... 20 6.5 Distant Signal Plate ...... 21 6.6 Co-Acting Signal Board ...... 21 6.7 Indicator Signal Board ...... 22 6.8 Signal Identification Plates Identified by Line and Distance ...... 22 6.9 Signal Identification Plates Identified by Controlling Lever Number ...... 23 6.10 Shunt Signal Identification Plates Identified by Line and Distance ...... 23 6.11 Signal Building, Cabinet & Location ID Plate ...... 24 6.12 Gantry Cage Signal Identification Plate ...... 24 6.13 Automatic Signal Board ...... 24 6.14 Warning Light Nameplate ...... 25 6.15 Trackside: Track Circuit Equipment Label ...... 25 6.16 Guards Indicator Plate ...... 26 7 Train Order Working Signs ...... 26 7.1 Location Sign ...... 26 7.2 Landmark Sign ...... 27 7.3 Train Order Working Yard Limit ...... 28 7.4 Train Order Working Catchpoint ...... 28 7.5 Train Order Working Shunt Limit ...... 29 7.6 Train Order Working Location Name Board ...... 29

8 Level Crossing Location Warning and General Signs ...... 30 8.1 CRN Cerberus level crossing warning sign...... 30 8.2 CRN Level crossing general location sign ...... 30 9 Road User Signs ...... 30 9.2 Train Drivers Signs ...... 32 9.3 Road Sign Combinations ...... 33 9.4 Pedestrian Crossings ...... 35

1 General 1.1 Introduction This specification contains the requirements for the wording, size, colour, and materials for notice plates, instruction plates and signs used with the railway safeworking systems and at level crossings in New South Wales.

Railway notice plates are divided into three categories:

- Signs or notice plates with an unconditional mandatory message, e.g., 'STOP' or signs which denote a hazard, e.g., 'CATCHPOINT'. These signs are normally white lettering on a red background.

- Signs or notice plates with an instruction to the driver which supplements the Safeworking Rules, e.g. 'Drivers must not pass this signal etc'. These signs are normally white lettering on a black background.

- Signs or notice plates of a specialised nature, e.g., advisory speed boards, pilot staff box labels. These signs may be in a variety of colours depending on application

Level Crossing signs comply with the materials, colours and sizes specified in Australian Standard 1742 Part 7 - 'Manual of Uniform Traffic Control Devices - Railway Crossings' and Australian Standard 1743 “Road Signs Specifications”. Methods of mounting may, however, differ.

Where a drawing number is referenced on the following pages, the sign shall be manufactured against that drawing.

Dimensions of constructed infrastructure may vary to the dimensions specified in this standard. In these cases the constructed infrastructure will be accepted.

1.2 Referenced Documents The following documents are referenced within this specification:

AS 1734 Aluminium Flat Sheet AS 1742 Part 7 Manual of Uniform Traffic Control Devices - Railway Crossings AS 1743 Road Signs Specifications AS 1744 Forms of Letters and Numerals for Road Signs AS1906 Retro-reflective Materials

1.3 Form of Lettering Except where otherwise shown, lettering and numerals and letter and numeral spacing shall be in accordance with AS 1744.

Letter or numeral sizes are quoted as, for example, “80DM” or “100CN” where;

- “80” and “100” are the letter heights in mm - “D” and “C” (series) are letter and numeral forms and “M” (medium) and “N” (narrow) are letter and numeral spacings specified in AS 1744.

Where letter or numerals which are not included in AS 1744 are specified, the form and proportion shall be similar to that shown in AS 1744.

2 Materials Signs and notice plates shall be made from aluminium alloy sheet or extrusion, Alloy shall be 5052 H38 :-

For 2 mm thick sheet 5052 H36 or H38 5086 H34 5251 H36 or H38 For 1.6 mm thick sheet 5052 H36 or H38 5251 H36 or H38 For extrusions 6063 T5 or T6 6061 T6 All sign and notice plate dimensions in the following sections are quoted in millimetres.

Where reflective lettering, numerals or backgrounds are specified, the reflective material as well as any process inks or pastes shall be to AS 1906 Part 1, with the class of material as specified for each sign.

Non reflective finishes such as paints, films or other coating materials shall be compatible with the reflective materials, adhere securely to the aluminium plate or extrusion and have an equivalent or better service life than the reflective materials.

Square corners shall be rounded to 5mm minimum radius.

Signs shall be securely fixed to aluminium channels by broad head aluminium rivets. The heads to be coloured to match the colour of the sign.

2.1 Dimensional Tolerances Overall dimensions of sign or plate ± 5 mm Vertical spacing between lines of letters or numerals ± 5 mm Mounting hole centres ± 2mm

2.2 Reflectivity Where reflective letters on a reflective background are specified, the same class of reflective material shall not be used for both letters and background.

Class 1 and class 2 materials to AS 1906.1 shall be used as specified herein, eg, class 1 letters on a class 2 background.

2.3 Mounting Some drawings referenced in Section 2 of this document detail ‘U’ bolt and similar direct mounting methods. However, with signs required to be fixed to circular posts, wherever possible they shall be manufactured and mounted using Signfix RTA style aluminium channel to suit M10 ‘T bolt’ together with anti-rotational clips, typically as shown on drawing M05-066.

Where mounting holes positions and sizes are quoted in this document, these are for direct mounting the plate to a signal post or rail post with U-bolts. If the signs are to be mounted using “Bandit” clamps or similar with proprietary brackets, hole centres should be varied to suit the bracket used.

Where a drawing number is referenced against a sign shown on the following pages, the sign shall be manufactured according to that drawing.

3 List of Current Signs and Plates Description Drawing No. Style Signal Identification Plates M01-143 Sign 8 Cars Clear Air Gap M05-001 Clearance Board Enginemen must ensure points are set and M05-002 Notice Plate Begin Single Light Indication M05-003 Notice Plate Post Mtg. Detail for Signs & Plates etc M05-004 Old details Post Mtg. Detail for Signs & Plates etc to fence M05-005 Old details Advisory Speed Signs M05-006 Assembly Limit of Shunt Board M05-007 Vertical Automatic Signalling Instruction M05-008 Notice Plate Stowing Limit M05-009 Notice Board Stop End of Staff Section & End of Staff Section M05-010 Notice Boards Catch Points M05-011 Notice Board Train crew Instruction for Level crossing M05-013 Instruction Plate Stop train not to pass until warning lights M05-014 Instruction Plate # Engine Road Not Wired M05-015 Sign Emergency Working remote Cont. Interlocking M05-016 Notice Plate Stop M05-017 Notice Plate Outer Home (OH) M05-018 Distinguishing Plate Outer Home (OH) M05-019 Vertical Plate Don’t Move when crossing barriers lowered M05-020 Warning Sign Block Joint M05-021 Vertical Notice Plate Identification Plates for huts M05-022 Identification Plate Train Staff Box Locations M05-023 Name Plate ID Plate mounting bracket M05-024 - ID Plate siding number M05-025 Plate Trains Must Not Increase Speed Before M05-026 Notice Plate Timing Track Marker M05-027 Plate Distinguishing plate accept signal M05-028 Plate Distinguishing plate accept signal, remote controlled M05-029 Plate Non Interlocked Area M05-030 Plate

Description Drawing No. Style This Signal is to be passed at Stop M05-035 Drivers Instruction Plate Tonnage Signal M05-045 Instruction Board Important Wind Both Ends M05-048 Warning Notice Begin and End, Yard Limit M05-052 Notice Plate Begin and End, Yard Limit M05-053 Vertical Notice Plate Begin and End, Yard Limit with location names M05-054 Vertical Notice Plate Begin and End, Yard Limit with location names M05-055 Notice Plate Worksite protection location Sign M05-056 Sign, post Mtg. Points Cleared, 8 cars M05-057 Sign, post Mtg. Points requiring clipping sign M05-059 Sign Pantograph Down sign M05-060 Sign When Authorised to Pass Signal M05-064/ Notice Plate 1 & 2 This Signal Must Not Be Passed at Stop M05-064/3 Notice Plate Sign post mounting hardware assembly detail M05-066 - Location Triangle M05-070 Sign Train Order Working with location track names M05-074/1 Sign Train Order Working Kilometerage marker M05-074/2 Sign Slip Site M05-076 Slip Board Worksite, Do Not pass at Stop M05-142/7 Sign Railway Level Crossing – Open Crossbuck M06-204 Sign Level Crossing signs - various M06-212 Sign Level Crossing - Train drivers Approach M06-213 Sign Pedestrian Level Crossing - Do Not cross M06-215 Sign Pedestrian Level Crossing – General signage layout M06-244 Sign Pedestrian Level Crossing – Emergency Exit M06-247 Sign Level Crossing - Train drivers Approach, Predictor M06-250 Sign Pedestrian Level Crossing – Cyclists Dismount M06-262 Sign Railway Level Crossing M06-263 Sign Level Crossing – Report all faults M06-265 Sign Axle Counter Sign Not Available Sign

4 Mandatory or Hazard Signs and Notice Plates Where horizontal and vertical signs are shown, the horizontal sign shall be used except where there is insufficient space available to locate the sign.

4.1 STOP Sign

Horizontal Sign Vertical Sign

STOP

Drawing No. M05-017 M05-007 Width 600 200 Height 400 800 Plate thickness 2 2 Letter size, type and 140EM 140EM spacing Letter material Retro-reflective White Retro-reflective White Class Class 1 1 Background material Retro-reflective Red Class Retro-reflective Red Class 2 2 Mounting To drawing M05-017 To drawing M05-017

4.2 Electric Trainstop Boards

Text Sign ELECTRIC TRAINS

STOP

Drawing No. - Width 450 Height 350 Plate thickness 2 Letter size, type and spacing 60DM 100DM Letter material Retro-reflective White Class 1 Background material Retro-reflective Red Class 2 Mounting -

4.3 Pantograph Down Board

Symbolic Sign

Drawing No. M05-060 Width 250 Height 360 Plate thickness 2 Letter size, type and spacing N/A Letter material Symbol - Black non reflective Background material Retro-reflective Yellow Class 1 Mounting To drawing M05-060

4.4 Electric Trains Point Clearance Sign

POINTS CLEARED 8 CARS

Drawing No. M05-057 Width 290 Height 420 Plate thickness 2 Letter size, type and spacing As nominated M05-057 Letter material Retro-reflective White Class 1 Background material Black non reflective Mounting holes centres and diameter As nominated M05-057

4.5 Electric Trains Prohibition Boards

Medium Wide electric rolling stock electric rolling stock must not pass this point must not pass this point

Drawing No. - - Width 600 600 Height 300 300 Plate thickness 2 2 Letter size, type and 120DM 100DM spacing Letter material Retro-reflective White Class 1 Retro-reflective White Class 1 Background material Retro-reflective Red Class 2 Retro-reflective Red Class 2

4.6 Derail Sign

Horizontal Sign Vertical Sign

DERAIL

Drawing No. M05-017 M05-007 Width 600 200 Height 400 800 Plate thickness 2 2 Letter size, type and spacing 120DM 100DM Letter material Retro-reflective White Retro-reflective White Class 1 Class 1 Background material Retro-reflective Red Class Retro-reflective Red 2 Class 2 Mounting To drawing M05-017 To drawing M05-007

4.7 Catch Point Sign

Horizontal Sign Vertical Sign

CATCH POINT

Drawing No. M05-011 - Width 600 200 Height 400 800 Plate thickness 2 2 Letter size, type and spacing 120EM 60EM Letter material Retro-reflective White Retro-reflective White Class 1 Class 1 Background material Retro-reflective Red Class Retro-reflective Red Class 2 2 Mounting To drawing M05-011 -

4.8 Block Joint Sign

Horizontal Sign Vertical Sign

BLOCK JOINT

Drawing No. - M05-021 Width 600 200 Height 400 800 Plate thickness 2 2 Letter size, type and spacing 120EM 60EM Letter material Retro-reflective White Retro-reflective White Class 1 Class 1 Background material Retro-reflective Red Class Retro-reflective Red Class 2 2 Mounting - To drawing M05-021

4.9 Limit of Shunt Sign

Horizontal Sign Vertical Sign

SHUNT LIMIT On DOWN MAIN O N SHUNT LIMIT

Drawing No. - M05-007 Width 600 200 Height 450 800 Plate thickness 2 2 Letter size, type and spacing 80DN 40DN 40DN Letter material Retro-reflective White Retro-reflective White Class 1 Class 1 Background material Retro-reflective Red Retro-reflective Red Class Class 2 2 Mounting - To drawing M05-007

5 Safeworking Instruction Boards 5.1 Prohibitive Boards

END SIGNALLED AUTHORITY DO NOT PROCEED UNLESS AUTHORISED

End of Signalling Authority Drawing No. - Width Height Plate thickness 2 Letter size, type and spacing 80DM Letter material Retro-reflective White Class 1 Background materials Top, Retro-reflective Red Class 2 Bottom, Black non reflective Mounting -

5.2 Semi-Automatic Signal Board

DRIVERS WHEN Alternate wording DRIVERS WHEN DIRECTED TO PASS THIS DIRECTED TO PASS THIS SIGNAL AT STOP MUST SIGNAL AT STOP MUST PROCEED AT RESTRICTED PROCEED AT RESTRICTED SPEED AND BRING THEIR SPEED AND BRING THEIR TRAIN TO A STOP WELL TRAIN TO A STOP WELL CLEAR OF CLEAR OF (name of crossover) (name of siding)

Drawing No. -

Width 600 Height 600 Plate thickness 1.6 Letter size, type and spacing 30CN Letter material Retro-reflective White Class 1 Background material Black non reflective Mounting -

5.3 Automatic Signal Board

DRIVERS WHEN PASSING THIS SIGNAL AT STOP IN ACCORDANCE WITH THE RULES MUST PROCEED AT RESTRICTED SPEED TO THE NEXT SIGNAL BEING PREPARED TO STOP SHORT OF ANY OBSTRUCTION

Drawing No. - Width 600 Height 450 Plate thickness 1.6 Letter size, type and spacing 30CN Letter material Retro-reflective White Class 1 Background material Black non reflective Mounting -

5.4 Slip Boards

SLIP SITE THIS SIGNAL MUST NOT BE PASSED AT STOP WITHOUT AUTHORITY FROM SIGNALLER AND SLIP SITE UNDER THE THIS SIGNAL MUST AUTHORITY OF A NOT BE PASSED AT SPECIAL PROCEED STOP WITHOUT AUTHORITY

Drawing No. M05-076 M05-076 Width 600 600 Height 400 750 Plate thickness 2 2 Letter size, type and spacing 50DN 50DN 40DN 30DN Letter material Retro-reflective White Retro-reflective White class 1 class 1 Background material Black non-reflective Black non-reflective Mounting - -

5.5 Distant Signal Boards

Horizontal board Vertical Board

WHEN THIS WHEN THIS SIGNAL SIGNAL IS AT STOP WAIT IS AT STOP WAIT ONE ONE MINUTE MINUTE AND THEN AND THEN PROCEED PROCEED CAUTIOUSLY TO NEXT CAUTIOUSLY SIGNAL TO THE NEXT SIGNAL

Drawing No. - - Width 600 400 Height 400 650 Plate thickness 2 2 Letter size, type and spacing 40DN 40DN Letter material Retro-reflective White class Retro-reflective White 1 class 1 Background material Black non-reflective Black non-reflective

5.6 Begin and End Single Light Indication Boards

BEGIN END SINGLE LIGHT SINGLE LIGHT

INDICATION INDICATION

“BEGIN” board “END” board Drawing No. M05-003 - Width 900 900 Height 450 450 Plate thickness 2 2 Letter size, type and spacing 80DM 80DM Letter material Black non reflective Black non reflective Background material Retro-reflective White Class 2 Retro-reflective White Class 2 Mounting To drawing M05-003 -

5.7 Tonnage Instruction Boards

TONNAGE SIGNAL TONNAGE SIGNAL TRAINS OF OVER TRAINS OF OVER PRESCRIBED LOAD PRESCRIBED LOAD TO WAIT UNTIL TO WAIT UNTIL

Drawing No. M05-045 M05-045 Width 450 450 Height 400 400 Plate thickness 2 2 Letter size, type and spacing 30CN 30CN Letter material Retro-reflective White class Retro-reflective White class 1 1 Background material Black non reflective Black non reflective Mounting - -

6 Miscellaneous Notice Boards 6.1 Advisory Speed Boards

A B C D For locomotive For XPT, Xplorer For Freight over Intermediate train hauled passenger and Endeavour 1150 long stop advisory and freight trains Speed Board. Note: Number as per design, Maintenance use Maintenance use Maintenance use Typically 8, 10, only. only. only. 12, 15, 20. Drawing No. M05-006 M05-006 M05-006 M05-006 Diameter 600 600 600 300 Plate thickness 2 2 2 1.6 Letter size, type 300DN 300DN 300DN 150DN and spacing Letter material Red class 1 retro Red class 1 retro Yellow class 1 White class 1 reflective reflective retro reflective retro reflective Background Yellow class 2 Silver class 2 retro Blue class 2 retro Black non material retro reflective reflective reflective reflective Mounting holes Specified by client Specified by client Specified by client Specified by client centres and diameter Mounting To drawing M05- To drawing M05- To drawing M05- To drawing M05- 006 006 006 006

6.2 Special Speed Board Metropolitan Area FREIGHT FREIGHT TRAINS TRAINS BEGIN END 80 80 SPEED LIMIT SPEED LIMIT

BEGIN Board END Board Drawing No. N/A N/A Width 800 800 Height 1200 1200 Plate thickness 2 2 Letter size, type and spacing “Freight Trains” 100EM 100EM “Begin” “End” 140EM 140EM “Speed Limit” 80DM 80DM Letter material Black non reflective Black non reflective Numeral 300 DM Yellow class 1 retro- Yellow class 1 retro- reflective reflective Disk 560 dia Blue non-reflective Blue non-reflective Background material Retro-reflective White class Retro-reflective White class 2 2

6.3 Yard Limit Signs

Horizontal Sign Vertical Sign

YL EYL

Drawing No. M05-052/055 M05-053/054 Width As per M05-052/055 As per M05-053/054 Height As per M05-052/055 As per M05-053/054 Plate thickness 2 2 Letter size, type and spacing As per M05-052/055 As per M05-053/054 Letter material Retro-reflective White class Retro-reflective White class 1 1 Background material Black non reflective Black non reflective Mounting To drawing M05-052/055 To drawing M05-053/054

6.4 Repeat Signal Plate

(signal name or number) REPEATER

Drawing No. - Width 600 unless shown otherwise Height 300 unless shown otherwise Plate thickness 2 Letter size, type and spacing 80DM Letter material Retro-reflective White Class 1 Background material Black non reflective Mounting -

6.5 Distant Signal Plate

Normative Maintenance Use Only (signal name or 300 number)

DISTANT 150 DISTANT

Drawing No. - Width 600 Height 300 Plate thickness 2 Letter size, type and spacing 80DM Letter material Retro-reflective White Class 1 Background material Black non reflective Mounting -

6.6 Co-Acting Signal Board

XXX XXX XXX CO-ACT YYY CO-ACTING CO-ACT

Drawing No. - - - Application Outdoor Outdoor Tunnel Width 600 200 160 Height 300 160 200 Plate thickness 2 2 2 Letter size, type and 80DM 50CN 50CN spacing Letter material Retro-reflective White Retro-reflective White Retro-reflective Class 1 Class 1 White Class 1 Background material Black non reflective Black non reflective Black non reflective Mounting - - -

6.7 Indicator Signal Board

XXX XXX INDICATOR IND

Drawing No. - - Width 600 200 Height 300 160 Plate thickness 2 2 Letter size, type and spacing 80DM 50CN Letter material Retro-reflective White Retro-reflective White Class 1 Class 1 Background material Black non reflective Black non reflective Mounting - - Note: Use co-acting plate for new work.

6.8 Signal Identification Plates Identified by Line and Distance

Horizontal Sign Alternative Version

N N 21.7 21.7

Drawing No. M01-143 M01-143 Width - Signal Post 600 - Width - Gantry mount 760 N/A Height 150 - Plate thickness 2 2 Letter size, type and spacing 100DN 100DN Letter material Retro-reflective White class Retro-reflective White class 1 1 Background material Black non reflective Black non reflective Mounting To drawing M06-264 To drawing M06-264

6.9 Signal Identification Plates Identified by Controlling Lever Number

Horizontal Sign Alternate Sign

SY 345 SY 345 L L

Drawing No. M01-143 Refer to M01-143 for general guidance Width 600 - Height 150 - Plate thickness 2 2 Letter size, type and spacing 100DN 100DN Letter material Retro-reflective White class Retro-reflective White class 1 1 Background material Black non reflective Black non reflective Mounting To drawing M06-264 To drawing M06-264

6.10 Shunt Signal Identification Plates Identified by Line and Distance

Horizontal Shunt Sign Vertical Shunt Sign

YY YY 123 123

Drawing No. M01-143 M01-143 Width 400 200 Height 90 165 Plate thickness 2 2 Letter size, type and spacing 50DN 50DN Letter material Retro-reflective White class Retro-reflective White class 1 1 Background material Black non reflective Black non reflective Mounting As required As required

6.11 Signal Building, Cabinet & Location ID Plate

N14.6 LOCATION

Drawing No. Refer M05-022 Width Refer M05-022 Height Refer M05-022 Plate thickness Refer M05-022 Letter size, type and spacing Refer M05-022 Letter material Retro-reflective White Class 1 Background material Black non reflective Mounting To suit

6.12 Gantry Cage Signal Identification Plate

N 21.7

Drawing No. M01-143 Width 760 Height 150 Plate thickness 2 Letter size, type and spacing 100DN Letter material Retro-reflective White Class 1 Background material Black non reflective Mounting To suit

6.13 Automatic Signal Board

A Drawing No. N/A Width 200 Height 250 Plate thickness 1.6 or 2 Letter size, type and spacing 180DM Letter material Retro-reflective White Class 1 Background material Black non reflective Mounting holes centres and diameter (clause 1.7) 160 x 160, 11 dia Mounting To suit

6.14 Warning Light Nameplate

Medium width

Narrow width if required

Corners 5mm radius Drawing No. - Width 300 Height 200 Plate thickness 2 Plate Material Aluminium – Marine grade 5005 if in corrosive environment Letter size, type and spacing 25D – Medium & narrow width letters if required to fit Letter material Retro-reflective White Class 1 Background material Black non reflective Mounting - Note: Line text will vary with location.

6.15 Trackside: Track Circuit Equipment Label

Horizontal Sign Vertical Sign

EH 12 . 46 BT

EH 12.46BT 4m TX

Style Case mount version Support post mount

Width 90 30 Height 45 125 Plate thickness 2 2 Letter size, type and spacing 12DN, 5mm spacing 12DN, 5mm spacing Letter material Engraved black paint filled Engraved black paint filled Background material Natural anodised Natural anodised aluminium aluminium Mounting Screw, rivet and/or glue Screw, rivet and/or glue

6.16 Guards Indicator Plate

GUARDS INDICATOR

Drawing No. - Width 250 Height 140 Plate thickness 1.6 Letter size, type and spacing 25D – Medium or narrow width letters if required to fit Letter material Retro-reflective White Class 1 Background material Black non reflective Mounting To suit.

7 Train Order Working Signs 7.1 Location Sign

Drawing No. M05-070 Plate thickness 1.6mm Triangle Background material Retro-reflective Yellow Class 1A Location Sign Retro-reflective Yellow Class 1A Size 980mm x 850mm 40mm radius corners Letter size, type and spacing 125mm CN or DN – Medium & narrow width letters if required to fit. Black Location name plate and TOW type plate. 900mm x 200mm 40mm radius corners. Location name plate Letter size, type and spacing 125mm CN or DN – Medium & narrow width letters if required to fit. Black Rear of Sign Glass White Mounting As per M05-070 Note: Can be used to replace Landmarks, without the name sign.

7.2 Landmark Sign The drawing listed for this sign shows imperial dimensions which should be converted to their nearest metric equivalent during manufacture. The drawing listed for this sign shows “yellow class 2 retro reflective material…”.It shall be as per the table below so that it is consistent with other yellow background signage within the CRN.

Drawing No. D06032 Plate thickness 2mm

Triangle Background material Retro-reflective Yellow Class 1A Rear of Sign Glass White Mounting As per M05-070

7.3 Train Order Working Yard Limit Front

Rear

Plate thickness 1.6mm Yard Limit Background material Retro-reflective White Class 1A reflective white and non reflective graphics on front. Size 1000mm x 700mm, 50mm radius corners. Rear of Sign Back gloss white and black non reflective grahics.

7.4 Train Order Working Catchpoint Front

Plate thickness 1.6mm

Yard Limit Background material Retro-reflective White Class 1A reflective white with fluoride red overlay. Size 600mm x 450mm, 40mm radius corners. Rear of Sign Matt grey

7.5 Train Order Working Shunt Limit Front

Plate thickness 1.6mm Yard Limit Background material Retro-reflective White Class 1A reflective white with fluoride red overlay. Size 600mm x 450mm, 40mm radius corners. Rear of Sign Matt grey

7.6 Train Order Working Location Name Board Front

Plate thickness 1.6mm Yard Limit Background material Retro-reflective White Class 1A reflective white with black non reflective background. Size 600mm x 150mm. Rear of Sign Matt grey

8 Level Crossing Location Warning and General Signs 8.1 CRN Cerberus level crossing warning sign. Front

Plate thickness 1.6mm Cerberus warning sign Background material Yellow Class 2 reflective with black non reflective background with anti-graffiti laminate. 40mm radius corners. Size 600mm x 450mm.

8.2 CRN Level crossing general location sign Front

Plate thickness 1.6mm Cerberus warning sign Background material White non-reflective with black non reflective background with anti-graffiti laminate. 40mm radius corners. Size 800mm x 600mm.

9 Road User Signs

9.1.1 Railway Crossing

Normative R6-25B sign to AS1742.7. Used with RX-1, RX-2 & RX-5 assembly. Refer to drawing M06-263 for details and stock code.

9.1.2 X Tracks

2 TRACKS

W7-2-2A sign to AS1742.7 for use with R6-25B sign. Used with RX-1, RX-2 & RX-5 assembly. Refer to drawing M06-212 for details and stock codes.

9.1.3 Railway Crossing

RAIL

WAY CROSSING

Alternative R6-24A sign to AS1742.7. Used with RX-1, RX-2 & RX-5 assembly. Refer to drawing M06-204 for details and stock code.

9.1.4 X Tracks

2 TRACKS

W7-2-1A sign to AS1742.7. Used with RX-1, RX-2 & RX-5 assembly. Refer to drawing M06-212 for details and stock codes.

9.1.5 Stop on Red Signal

STOP ON RED

SIGNAL

R6-9 sign to AS1742.7. Used with RX-5 assembly. Refer to drawing M06-212 for details and stock code.

9.1.6 Stop Here on Red Signal

STOP HERE ON RED

SIGNAL R6-6A sign to AS1742.7.1Refer to drawing M06-212 for details and stock code.

9.2 Train Drivers Signs

9.2.1 Approach Warning Sign

Sizes and colours as for W7-4B sign to AS1743. Refer to drawing M06-213 for details.

Note: Provision of the advance warning sign (for road users) is normally the responsibility of the road authority. W7-4C sign size may be more appropriate in some country situations.

9.2.2 Approach Warning Sign for Crossings Fitted with Predictors

Refer to drawing M06-250 for details.

Note: Predictor warning signs are similar to W7-4B sign except banded in blue.

9.3 Road Sign Combinations

9.3.1 Actively Protected Crossings (RX-5 Signal Assembly Incorporating Sign R6-25)

G I N S R6-25B S O R C 2 TRACKS W7-2.2A

STOP ON RED R6-9 SIGNAL

Normative RX-5 assembly to AS1742.7.

9.3.2 Actively Protected Crossings (Alternative RX-5 Signal Assembly Incorporating Sign R6-24)

RAIL

R6-24A WAY CROSSING 2 TRACKS W7-2.1A

STOP ON RED R6-9 SIGNAL

Alternative RX-5 assembly to AS1742.7.

9.4 Pedestrian Crossings

9.4.1 Active Protection (Lights And Siren etc.)

W7-14-3 sign to AS1747.7. Refer to drawing M06-215 for details.

9.4.2 Remotely Monitored Sites

XXXXXXXXXXXXXXXXXXXXXX

Level Crossing Warning Equipment

Refer to drawing M06-265 for details.

9.4.3 Cyclists Dismount

G9-58A sign to AS1747.7. Refer to drawing M06-262 for details.

9.4.4 Emergency Exit with Gate Release

Refer to drawing M06-247 for details.

9.4.5 Emergency Exit Arrow

Refer to drawing M06-247 for details.

Note: RH arrow version shown.

9.4.6 No Thoroughfare

Refer to drawing M06-244 for details.