Triple Flash Hot Shoe Adapter Manual.Indd

FA-300HS Triple-Flash Hot Shoe Adapter Mount Thank you for choosing Impact. The Impact FA-300HS Triple-Flash Hot Shoe Adapter Mount lets you mount and sync three flashes on a single adapter. You can fire the flashes at full power for greater light output or, for faster recycle times, fire them at half power. This unique adapter features a female 1/4˝-20 thread for universal mounting, and may be combined with an umbrella, light panel, or other lighting accessories (sold separately). The Impact FA-300HS Triple-Flash Hot Shoe Adapter Mount has a 3.5 mm jack, so you can use a sync cord to connect the adapter to your camera or wireless receiver. If you own an Impact PowerSync DC Radio Slave System or a similar wireless unit, you can fire them all with a single receiver attached to the adapter. While not designed for use with high-voltage flashes, you can use the Impact FA-300HS Triple-Flash Hot Shoe Adapter Mount to mix and match flashes from most major digital camera manufacturers. Specifications

• Three hot shoe mounts • 1/8˝ (3.5 mm) jack for sync cord or wireless receiver • Thread size: 1/4˝-20 female • Dimensions: 2.5˝ × 1.12˝ × 1.37˝ (63.5 × 28.57 × 34.9 mm) • Weight : 1.6 oz (44 g) Features

• Mount and sync three flashes on a single bracket • 1/4˝-20 thread for universal mounting • 1/8˝ (3.5 mm) jack for sync cord or wireless receiver • Fire three flashes with one wireless receiver • Mix and match flashes from most major digital camera manufacturers Recommended Accessories

• Impact Powersync16D Radio Slave System • Impact 9101880 Umbrella Bracket with Adjustable Shoe • Impact CA-101 Rapid Adapter with 1/4˝-20 Male Thread

Visit our website at www.impactstudiolighting.com for more Impact accessories. Warnings ⚠⚡ • Keep this unit away from water and any flammable gases or liquids. • Do not attempt to disassemble or repair the equipment – doing so will void the warranty, and Impact will not be responsible for any damage. • Handle the unit with care. • Clean the unit with a soft dry cloth. • Keep this unit away from children. • Make sure everything is secure before proceeding. • Make sure the item is intact and that there are no missing parts. • Do not use this hot shoe adapter mount with high- voltage flashes. One-Year Limited Warranty

This Impact product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Impact Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Impact along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.impactstudiolighting.com or call Customer Service at 212-594-2353.