Hx50 and Huox Space

QUICK USER GUIDE

HX50 AND HUOX

SPACE

Space platform.

HUMANOX SOCCER S.A., 11500 Pagador, 40 local 3,

El Puerto de Santa María, Cádiz, SPAIN.

Tel.: 954051428 / 655092196

Web Site: www.humanox.com

Unless expressly stated herein, no part of this manual may be reproduced, copied, transmitted, broadcast, downloaded, or stored in any storage medium for any purpose without the express written permission of HUMANOX.

HUMANOX is a registered trademark of HUMANOX SOCCER S.A.

HUMANOX informs that the HX50 is not a diagnostic medical device. For any medical problem it is important that you have seen or visited your physician and initiated or completed treatment.

Nothing in this guide is intended to be medical advice, nor should it be construed as such. Consumers should consult with their own health care professionals for their individual medical recommendations. The information on this website relates to smart shin guards for sports performance monitoring, an over-the-counter product that is not a medical device. Our products are not intended to be used as a means to cure, treat, prevent, diagnose or mitigate any disease or other medical or abnormal condition.

You just acquired the HX50 smart

shin guards from HUMANOX

You are about to enter HUOX Space, the

platform that integrates the HX50

In these pages, we will guide you step by step through the HX50 and we will teach you how to use HUOX Space

GENERAL DESCRIPTION OF THE HX50 5, 6

HOME QUICK USER GUIDE HX50 7

CONTENT OF YOUR HX50 8

KNOW YOUR HX50 8

HX50 INTERNAL PART 9 TURNING ON YOUR SHIN GUARDS 10, 11

IDENTIFIER/IMEI/MAC NUMBER 11

TURNING OFF YOUR SHIN GUARDS 11

CHARGING BASE FOR YOUR HX50 12 CHARGE YOUR HX50 13,14

HOME 15

QUICK USER GUIDE HX50 16

THROUGH THE WEB 16,17

MAIN SCREEN 19,20

ADD YOUR SHIN GUARDS 20 22 START A MATCH 23 CHECK YOUR METRICS CHANGE THE DEVICE 23

HOW TO LOG OUT 24

ACCESS THE PLATFORM THROUGH THE APP 24,25

START A MATCH 27

CHECK YOUR METRICS 27

SWITCH THE DEVICE 28 HOW TO LOG OUT

ENERAL DESCRIPTION OF THE HX50

The HX50 are the world's first smart and connected carbon shin guards, capable of collecting 50,000 raw data, and translating them in real time in the form of metrics on the HUOX Space platform. Manufactured with aerospace technology using carbon fiber, which makes them very resistant and lightweight, HUMANOX shin guards become an aid for the player's sports performance and health status.

This highly technological device is equipped with an electronic board inside with sensors and advanced elements such as gyroscopes, accelerometers, GPS, heart rate sensor, etc. All the data collected will be available on the HUOX Space ecosystem through the web or the App on both Android and iOS.

The metrics that can be obtained using the HX50 are the following:

Time spent walking and standing Calories Time spent running Number of Steps Time spent sprinting Time played Average speed Temperature Maximum speed Total Distance Maximum Heart Rate. Average Heart Rate Ball kicks with the Left Leg Impacts Ball kicks with the Right Leg Activity Percentage Graph

Heart Rate Frequency Graph Speed Graph

*Day by day we are incorporating new metrics. Visit our website for the most updated version of the guide: https://humanox.com/

NFORMATION COVID-19

The HUOX Space APP offers a Covid alert. During the first 5 minutes of use, an alarm message is triggered if the player's temperature exceeds 38° Celsius. This warning is possible thanks to the body temperature sensor built into the HX50.

Before going into the guide of the HX50 smart device and the HUOX Space platform, we must inform you that it is important to have an active subscription to the platform (to check plans and prices visit our website https://humanox.com/) once the user has received the smart shin guards.

In said digital ecosystem, you can synchronize / add your shin guards to get the data collected from the HX50 in real time.

You can also subscribe as a follower without having to purchase the device, so your friends and family can follow you in real time, both you and your favorite players.

HX50

ONTENT OF YOUR HX50

Your HX50 set includes a bag to store your shin guards, a charging base, and a USB cable for charging.

Carrying bag

Charging base

HX50

USB Cable for charging

NOW YOUR HX50

The HX50 smart shin guards are a sensorized device with real-time connection, equipped with high technology made available to the user. These shin guards are made of carbon fiber, which makes them very light. Its mechanical properties allow that the strength of any received impact is distributed over the entire surface, thus reducing the power of the impact that the player receives.

LEFT RIGHT

X50 INTERNAL PART

Both shin guards, left and right, are different both in their internal design and in their functionalities. To differentiate between the left and right shin guards, note that the left HX50 has a built-in sensor with three LEDs, while the right HX50 has a single LED. In addition, on the outside, the HX50 is labeled "Left" (left shin guard) and "Right" (right shin guard).

LEFT SHIN GUARD

•

RIGHT SHIN GUARD

It gives us information regarding connectivity with the mobile network and TURN ON LED/ STATUS GPS connectivity

Your HX50 will automatically shut down after 2 minutes of inactivity. The complete shutdown process is described on page 11.

URNING ON YOUR SHIN

GUARDS They must first be charged (page 13 of this guide). Turning on the HX50 is very simple, you just have to hold the shin guard with one hand and, with two fingers of the other hand, tap twice on the inner central part to turn it on. This process must be done with each shin guard. There is not a preference to turn the left or right first. Turn them on outdoors before starting your match or training (Pay attention to the Satellite/GPA acquisition process described on this page).

RIGHT SHIN GUARD

When turning on the right shin guard, you should be aware of its 3 power-on states:

FIXED LED (Steady Green Light): means that the right HX50 is powered on correctly.

SLOW FLASHING LED: Green light with one single flash per second): Means correct connectivity of the shin guard to the mobile network, i.e. shin guard correctly connected to the HUOX Space platform. .

FAST BLINKING LED (Green light with two blinks per second: means GPS signal activated. To get a GPS signal, it is important to hold the right shin guard in your hand for about 40 seconds before putting it in place.

LEFT SHIN GUARD

The HX50 remains fixed from the

start and will not change its status

until it is turned off again.

UMBER IMEI OR MIC

AA 15 15-digit-digit identification identification numbernumber isis printedprinted on the inside.inside. ThisThis numbernumber is is unique unique and and is is the the one one that isthat entered is into entered the HUOX into the Space HUOX platform Space so platformthat the shin so that guards the are shin correctly guards synchronized. are correctly If you addsynchronized. your shin guards If you through add your the HUOX shin guardsSpace website, through the the identification HUOX Space number website, appears the under theidentification name IMEI. number If you appearsare adding under the theHX50 name from IMEI. the APP,If you this are numberadding theappears HX50 as from MIC. the The ID numberAPP, this can number be found appears on bothas MIC. the The left andID number right shin can guards.be found The on both synchronization the left and processright is described on page 26. shin guards. The synchronization process is described on page 26.

NUMBER IMEI OR MIC

TURNING OFF YOUR SHIN GUARDS

Your shin guards will automatically turn off after two minutes of inactivity.

They will also turn off when inserted into the main charging base, as described in the "Charging your shin guards" section on page 13 of this guide.

HARGING BASE FOR YOUR HX50

YourYour HX50 HX50 comes comes with with a a charging charging base base and and USB USB cable. cable. For For a afull full charge, charge, the the approximate approximate charging time is 4 hours. The first time you charge them you will need to leave them for 6 hours. charging time is 4 hours. The first time you charge them you will need to leave them for 6

hours.

Micro USB port to insert the cable to charge the shin guards.

| Charge identification LEDs for your HX50. They also inform you when the HX50s are fully charged. (Charging the LEDs blink, when fully charged the LEDs remain fixed).

| Spaces in which to deposit the HX50s to be charged.

HARGE YOUR HX50

To charge the HX50, you need to note that a USB cable is provided with the delivery of the shin guards. A USB adapter or another source such as a computer can be used as a power source which is not included in your pack.

First, place the HX50 on the charging base. When loading the HX50 it is important to place the shin guards correctly in the spaces of the charging base. To do this, you must place the shin guard vertically. Once the shin guard is vertical, you will need to insert the narrowest part of the shin guard into the space allotted for the charging base. Then press the shin pad down until it clicks into the bottom.

Plug the USB cable into the USB port, which is located in one of the laterals of the inferior part of the charging base.

Then, plug the cable into the power source and charge the HX50 for 4 hours.

(6 hours for the first time) The charging base adapts to any power source from a USB adapter to a computer, for example. Please note that for the charging process to last four hours you need to use a 3.5 mA charger plug. If this is lower than recommended, the charging process may take longer.

The LEDs will give you the information if the shin guards are charging correctly or if the HX50 are fully charged. If both LEDs, which are located on each side of the micro-USB port of the charging base (one LED for the left shin guard and one LED for the right shin guard), are flashing, it means that the HX50 are charging correctly. When the LEDs remain fixed, it means that the HX50s are already charged.

HUOX SPACE

ENERAL DESCRIPTION OF HUOX SPACE

HUOX Space is the HUMANOX platform where you can see your metrics for each match or training session. Here you can create a profile and link your HX50 shin guards, as well as follow other users, have them follow you and share your metrics.

Registration to the HUOX Space platform can be done from the web or from the APP, available on both Android and iOS. To enjoy the advantages and benefits of the HUOX Space ecosystem you need to subscribe.

Remember that if you have any doubts or questions regarding the operation of the HX50 device or the HUOX Space platform, you can contact Customer Service:

Phone Numbers: +34954051428 / +34655092190

WhatsApp: +34655092190

15 Email: [email protected]

ccess through the web

In the following pages, you can see the steps you need to follow to enjoy all the functionalities that HUOX Space offers through the web.

EGISTER IN THE HUOX SPACE PLATFORM

Registering on HUOX Space through the website is very easy. Remember that you need to be a subscriber to be able to see your metrics for each training session or match.

Enter the website: https://live.humanox.com.

Then click the button “Sign up"

You will find three profiles: player, technical Fill in your personal data. team (coach or physical trainer), environment

(parents or followers). Choose the one that applies.

After the message "Account successfully Accept the terms and conditions. created" pops up, click "ACCEPT."

Click "CREATE AN ACCOUNT"

AIN SCREEN

From the main screen you will be able to access the 3 HUOX SPACE menu selections

Left menu selection:

Add and remove shin guards,

Start and stop matches,

Superior Right Menu:

Check your metrics

Edit profile

Interact with other users

Log out

Inferior Right Menu: Synchronize your shin guards

Check the GPS signal status

Record the match

DD YOUR SHIN GUARDS

First of all, you need to add your shin guards to your previously registered user. To do this you have to turn them on, wait for the HX50 LED to flash every second and follow the steps described below. Once added, through the APP or web, you will be able to record your matches or training sessions, as long as the HX50 are turned on and they have a GSM and GPS mobile network signal. You will also be able to see in the APP and/or Web all the registered/recorded matches/trainings.

Click in "MY SHIN GUARDS" Click in “ADD SHIN GUARDS”

Fill in the IMEI number of your shin guards.

Click “ADD”

IMEI

The IMEI is the identification number of the HX50 to connect to the HUOX Space platform. It appears on both the left and right shin guards, and is given under the name MIC.

Check that the identification number is correct

TART A MATCH

ATTENTION: Before starting the game, make sure that the HX50s are turned on and connected to GPS (two flashes per second).

Click in “MY GAMES"

Click the green "+" 20

Optional, "Check the GPS signal" to see the Optional, check the GPS sign clicking GPS connection at the time. on the “CHECK" button.

Click the button "Start match”. Click in "RECORD THE MATCH"

At the start of the game, a running timer appears, indicating that the game is recording successfully.

As the recording of the match takes place, the data collected from the HX50s will be collected as metrics in HUOX Space in real time.

On the image of the field, you can see the position of the player in real time.

Once the match or training is over, click on the "Stop" button.

HECK YOUR METRICS

Once you have recorded your match you can check your metrics by following these steps:

Click on "MY GAMES" Choose the match of your preference

Example of metrics that are shown in HUOX SPACE

HANGE OF DEVICE

If for some reason you need to change your device, you first need to unlink the one you are using, and then add a new one as indicated in the "Add your shin guards" section (p. 19 of this guide).

Click on the green "+" button and select the Click on "MY SHINGUARDS" opcion “Remove”.

Go to section: "Add your shin guards" (p. 19)

LOSE SESSION

Once you have finished using the platform, do not forget to log out.

Click on the superior right menu Click on the button "Log out"

ccess through the APP

If you prefer to access HUOX Space through the APP, it is also possible from both Android and iOS.

OW TO REGISTER

Registering with HUOX Space is very easy. All you have to do is follow the steps below. The first thing you need to do is download the HUMANOX APP. We remind you that in order to access to your metrics you need to have your subscription active.

Download the APP Add the email and Accept the terms and conditions. from Play Store or password that you wish

Apple Store to register yourself with Click on the button "Join HUMANOX" Click the button “Sign up”

Fill out your personal Introduce your name and nickname Choose a profile: data “player” or “follower” Click on the button

"Following”

Finally, a welcome screen pops up. Click on the button "Start"

YNCHRONISE YOUR SHIN GUARDS

By syncing your shin guards, you can record your matches or training sessions, as long as the HX50s are switched on and have a mobile network signal.

Once you are registered, Introduce the IMEI Click the button click the button synchronize number of your shin guards "Next"

Check that the IMEI number is correct The MIC or IMEI is the identification number of the HX50 Click on the icon to connect to the HUOX Space to go to “My platform. It appears on both the profile” left and right shin guards.

TART A MATCH

ATTENTION: Before starting the match, make sure that the HX50 is turned on and connected to the GPS signal (two flashes per second). Make sure you wear your shin guards in such a way that they do not move and in the correct position for the entire match, to obtain accurate metrics. The left shin guard should be in contact with the skin in order to obtain both body temperature and heart rate. The right shin guard does not need to be in contact with the skin.

Then, a screen with a Click on the green button (Optional) Check your GPS confirmation statement will pop up. Click "OK" Click on the button "Start a match"

Once is recording, a running timer will pop up in the screen

Click on the "stop button" once the match or training is over

HECK YOUR METRICS

Once you have finished your match, you can check your metrics by following these steps:

Once the matches have been The metrics screen will appear completed, they will appear on immediately the "My profile" screen. You need to select the desired match.

HANGE YOUR DEVICE

In case you need to change the device, you must first unlink the one you are using, and then add the new one following the steps indicated in the section "Synchronise your shin guards" (page 25).

Click on the Wheel Click on “Humanox Next, a confirmation situated in “my Shin guards” screen will pop up. profile” section Click on the button yes. Then, the device will be removed.

OW TO LOG OUT

Once you are done working with HUOX SPACE, do not forget to log out.

In the screen "My profile", click on the right superior menu Once you are inside the configuration menu, click on "Log out"

If you have any questions regarding the operation of the HX50 shin guards and the HUOX Space platform, please

Telephones: +34 954051428/ +34 655092190

WhatsApp: +34 655092190

Email: [email protected]