1. What are the factors that affect the nature of human activities? A. anthropogenic* B. abiotic C. isothermal D. biotic E. physiological
2. What is the state system of monitoring the quality of the environment and the health of the population? A. socialhygienic monitoring* B. it is a system of sanitaryepidemiological norms C. hygienic diagnosis D. the federal hydro meteorological monitoring system E. methodological risk assessment
3. What is meant by the term "xenobiotic"? A. alien chemicals* B. the product containing food additives C. pesticides D. carcinogens E. vitamins
4. List of the physiological responses of the human body to cold exposure: A. vasoconstriction, changes in metabolism* B. extension of vessels, behavioral responses C. decreasing of the appetite D. deterioration of the mood E. insomnia
5. Specify which physiological responses of the human body occur during thermal exposure? A. vasodilatation, increased heart rate, breath frequency* B. extension of vessels C. the restriction of blood vessels, respiratory rate D. decrease in appetite E. deterioration of the mood
6. Identifying the factors that influence the amount of heat given off by the radiation: A. temperature enclosing surfaces* B. air temperature C. air humidity D. the velocity of air movement E. noise level
7. The definition of what kind of moisture is most important from the hygienic point of view? A. relatively* B. absolute C. maximum D. general char E. partsial
8. What instrument measures humidity? A. psychrometer* B. sound level meter C. catathermometer D. actinometer E. aspirator
9. What part of the solar spectrum has antirachitic and bactericidal action? A. ultraviolet rays* B. laser rays C. visible light D. X rays E. shortrays
10. List the types of artificial lighting: A. general, local, joint* B. general and local C. is the upper, lower, combined D. upper and lateral E. fixedcombination, lateral and local
11. In which age groups the adult workingage population is divided? A. 18-29; 30-39; 40-59* B. 18-25; 26-35; 36-55 C. 18-29; 30-49; 50-69 D. 18-50; 50-100 E. not existing group differences
12. Specify the stages of hygienic standardization and consistency: A. justification of approximate safe level of substance (ASLS), study the maximum concentration limit (MCL), the MCL adjustment* B. justification of ASLS, correction of the MCL, the MCL study C. development and approval of MCL D. justification of MCL and harmonization E. development ASLS and statement
13. What is silicosis? A. occupational disease of the lungs caused by silica dust* B. occupational disease skin disease C. occupational disease blood disease caused by metal dust D. disease caused by noise E. disease caused by vibration
14. What anthracosis? A. lung’s occupational disease caused by coal dust* B. occupational disease skin disease Hand C. disease caused by noise D. occupational disease lungs caused by silica dust E. disease caused by vibration
15. How to normalized noise level in the production? A. on sound pressure levels in 8 octave bands* B. by overall sound level in dB(A) C. by volume D. by sound pressure levels in 6 octave bands E. by meanlargest volume in dB(A)
16. For the spectrum, some have lower noise remote control? A. to high* B. for midrange C. for ultrashort D. for bass E. irrelevant
17. What are the companies organizing the health unit? A. on enterprises with fewer and more 4000* B. on all industrial enterprises C. on private enterprises D. on plants where adverse working conditions E. only in state enterprises
18. The operating principle of the device is described: two parameters are determined by the thermometers, the vessel of one of them moistened. Moisture evaporates at a different rate, depending on humidity and air velocity, takes the heat from the bulb, so wet bulb readings to be lower A. psychrometer* B. cathathermometer C. anemometer D. reometr E. thermometer
19. In order to determine the velocity of the air at the outlet of ventilation used: A. anemometer* B. reometr C. psychrometer D. sound level meter E. actinometer
20. Humidity of the workplace can be measured by: A. psychrometer* B. anemometer C. cathathermometer D. actinometer E. sound level meter
21. The hygienic standard of air velocity in a room: A. 0,10,2 m/s* B. 0,2–0,4 m/s C. 0,4–0,8 m/s D. any range E. only with the windows open
22. The hygienic standard of relative humidity in the room: A. 40-60%* B. 50-70% C. 20-30% D. any range E. only with the windows open
23. For human thermal comfort in the room is essential: A. air temperature, the magnitude of temperature differences in the vertical and horizontal temperature of the internal wall surfaces* B. air temperature C. is the temperature of air, the amount of temperature changes vertically and horizontally D. does not matter E. noise level
24. When the lighting working surfaces for a long time can develop the following diseases: A. false shortsightedness* B. cataract C. nystagmus D. nictitating spasm E. blindness
25. Indicators used to assess natural light: A. the coefficients of natural light, the depth of the index, the light factor* B. coefficient of uniformity of illumination C. lighting in the workplace, the specific wattage D. illumination level at nighttime E. does not exist
26. Indicators used to assess artificial light: A. workplace lighting (lux), lighting uniformity coefficient, specific power lamps* B. the coefficient of natural light, the light factor C. level only illumination in the aisles D. level illumination in% E. does not exist
27. Hygienic characteristics of the noise: A. all sorts of unpleasant or unwanted sound or set of sounds that have a harmful effect on the human body, reducing its performance* B. mechanical vibrations of an elastic medium in the range of audible frequencies only C. state medium in the sound field due to the presence of electromagnetic waves and the field strength D. feeling, audible to human ears only in the morning E. generators only when exposed to EMF
28. Body human ear perceives sound vibrations frequency: A. 16 to 20000 Hz* B. from 2 to 2000 Hz C. up to 1200 Hz D. up to 160 Hz E. from 5 to 100 Hz
29. More irritable organ human hearing are the sounds: A. the highfrequency (HF)* B. low frequency C. irrelevant D. sounds workplace E. sounds only work at night
30. To combat the noise the most efficient is to reduce it: A. at source* B. as pathways C. by the use of personal protective equipment D. carrying out of honey. Inspections E. fortification workers
31. In some cases, employees enjoy special breaks for warming and rest, which are included in the working hours? A. for the performance of work in the cold season outdoors or in enclosed unheated rooms* B. at work outside normal working hours C. with the division of the day into parts D. only wage workers E. on request workers
32. Who provided the acquisition, storage and maintenance of personal protective equipment? A. provides the employer* B. provides employees C. on request workers D. provides trade union committee organization E. the engineers and the personnel department
33. Local exhaust ventilation system includes: A. hoods, fume hoods* B. air scenting C. air curtains D. deflectors E. ductwork
34. What kind of openlocal suction do you know? A. hoods* B. conditioner C. vents D. transoms E. fan
35. Who is responsible for the organization and timeliness of training but labor protection and examination requirements of the protection of employees of the organization? A. employer* B. service of labor protection C. human resources department D. therapist E. paint doctor
36. Who is subject to safety training and testing of knowledge of labor protection requirements? A. mark all employees of the organization, including head* B. only workers employed in hazardous work C. only guard services D. the engineers and the personnel department E. therapist
37. By what means workers employed in jobs related to traffic, pass obligatory preliminary and periodic medical examinations? A. for the employer's expense* B. this your account C. preliminary medical examination workers are at their own expense, periodic at the expense of the employer D. on request of the employee E. on request of the employer
38. What is the normal hours of work per week? A. 40 hours* B. 36 hours C. 42 hours D. on request of the employee E. on request of the employer
39. What is the definition of "occupational safety and health" is true? A. security work the system the preservation of life and health in the workplace, including the legal, social and economic, organizational and technical, sanitary and hygienic, medical and preventive, rehabilitation measures* B. occupational safety and health a set of factors of production environment and labor C. process affecting the performance and health of the people D. occupational safety and health a safety and health E. occupational safety and health is the theory of occupational health
40. Sanitary norms and rules established that the area per one working place with a PC should be: A. is not less than 6 square meters* B. not less than 4 square meters C. not less than 5 square meters D. irrelevant E. with taking into account the time of year
41. Ergonomic workplace with a personal computer should provide the distance from the monitor to the user's eye: A. is not less than 50 sm, normally 60-70 sm* B. is any, it is convenient to the user C. to depending on the brand of computer D. to depending on the position E. to depending on the duration of breaks
42. Which categories of users of personal computers are mandatory periodic medical examinations? A. works with personal computers for more than 50% of the time workers connected only with the repair of personal computers* B. population personal computers users C. hackers D. to depending on the position E. only engineers and technicians of personal computers
43. What is that noise? A. is a chaotic mix of sounds* B. is the sounds following one after the other and having different intensities C. harmonius combination of sounds D. disharmonius sounds more common in manufacturing E. rock music
44. How to normalized noise level in the production? A. on sound pressure levels in 8 octave bands* B. by the overall level of sound C. by volume D. by the sound pressure level at 6octave bands E. not normalized
45. As a means of individual protection against noise using: A. antiphons* B. earplugs C. respiratory D. through microphone E. masks
46. Occupational poisonings are called: A. diseases arising production upon contact with industrial poisons* B. are any intoxication occurs in industrial workers of enterprises C. poisoning at nighttime working hours D. newly arrived workers E. with poor personal hygiene
47. How to interpret the concept of ASLS? A. of approximate safe level of substance * B. total safe level of substance C. it is a relatively safe level of exposure D. general safety device vibrometer E. total safe level of vibration
48. Define the concept of MPL: A. maximum permissible limit of exposure to physical factors* B. limit the permissible level of chemical exposure factor C. refractive proper level of exposure to environmental factors D. limit traffic street E. the refractive action of ultrasound
49. Define the concept of occupational hazards: A. factors is a production environment, having a negative impacton the performance of the professional or cause disease in working* B. is the factors of the working environment exclusively biological nature, causing occupational diseases among workers C. is the factors of the working environment extremely physical nature, causing occupational diseases among workers D. is the factors of the working environment caused by exceptional gravity labor E. is the factors of the working environment caused by extremely intense work
50. List the types of cumulation: A. material and functional* B. general or local accumulation C. functional D. exclusivity E. material exclusivity
51. What determines the biological effect of the noise? A. the amplitude and frequency* B. from sound pressure level C. only frequency D. only the wavelength E. from the post
52. The units of measure the level of intensity of the sound? A. bells and decibels* B. to Hertz C. to backgrounds D. to joules per square meter E. to A/m or V/m
53. The units of measure the volume? A. fon* B. decibel C. pendant on a square meters D. antiphons E. bells
54. The units of measure the frequency of sound vibrations? A. hertz and kilohertz* B. bells and decibels C. backgrounds D. W/m2 E. antiphons
55. What are called impulse noise? A. noise, consisting of one or more sound signals, each lasting less than 1 second* B. noise, the sound pressure level which is constantly changing in time C. noise, the sound level of which varies in steps of 5 dB (A), and more D. noise, the sound level of which 8hour workday varies in time by more than 5 dB (A) E. noise, the sound level of which does not change
56. What kind of noise is called constant? A. noise, the sound level of which 8hour working day is changed during time no more than 5 dB (A)* B. noise, the sound pressure level of which varies continuously during time C. noise, consisting of one or more audio signals, each shorter than 1 sec D. noise, the sound level of which varies only in steps of 5 dB (A) E. noise, the sound level of which does not change
57. How to normalized noise level in the production? A. on the overall sound level in dB(A)* B. by the overall level of sound C. by volume D. by sound pressure levels in eight octave bands E. by sound pressure levels in the five octave bands
58. What is the effect of noise on hearing organ is the most unfavorable? A. pulse* B. constant C. broadband D. narrowband E. intermittent
59. The means of individual prevention of pneumoconiosis are: A. respirators* B. indoor ointments and pastes C. inhalers D. protective glasses E. specialist clothes
60. Permanent employment is? A. the place where they work is a large part of the working hours (more than 50%, or more than 2 hours continuously) * B. place where working is a smaller part of the working time C. place where work is most of the working time (over 25%) D. is any place of work in production E. official place
61. Which group of dangerous and harmful factors are driving machinery, unprotected moving parts of the production equipment? A. physical* B. biological C. chemical D. psychoemotional E. external production
62. Which group of dangerous and harmful factors are microorganisms? A. biological* B. chemical C. physical D. psychoemotional E. external production
63. Is it necessary to acquaint the worker with the order for a job? A. the desired* B. not necessary C. on discretion D. on request of the employee E. on demand sanitary doctor
64. List the skin protection: A. *overalls, gowns, capes* B. cottongauze bandage C. respirator, masks D. earplugs E. antiphons
65. The exhaustion is: A. the time decrease in working capacity caused by performance work* B. infringement of an industrial dynamic stereotype C. functional changes in bodies and organism systems D. occurrence of stagnant braking in the brain centres E. subjective sensation
66. Endurance indicator: A. time during which work set effort can be carried out* B. weight of cargo which the worker for an interval of time can lift C. ability of an organism to resist to stressful situations D. operating time in adverse conditions E. the work experience in adverse conditions
67. Dust loading on respiratory organs of the working is defined as: A. total quantity of particles of the dust arriving in respiratory organs for a certain interval of time (change, month, year, the experience) * B. total weight of the dust arriving in respiratory organs during the seniority C. the maximum concentration of a dust in air of a working zone D. maximum concentration limit excess in 10 times E. the minimum concentration of a dust in air of a working zone
68. Industrial noise with prevailing frequency more than 1000 Hz belongs to the class: A. highfrequency* B. the lowfrequency C. the midfrequency D. the mechanical E. the voicefrequency
69. At noise level change for a labour shift no more, than on 5 decibel, it is called: A. constant * B. the broadband C. fluctuating in time D. the voicefrequency E. the mechanical
70. At noise level change for a labour shift more, than on 5 decibel, it is called: A. not constant* B. the broadband C. to constants D. the voice frequency E. the mechanical
71. Levels of sound pressure in octava strips of frequencies and in decibel are normalised on workplaces for noise: A. constant* B. the faltering C. the pulse D. the changeable E. the mechanical
72. The industrial ultrasound represents mechanical fluctuations of the elastic environment in a range of frequencies: A. 16 Hz and less* B. 16 к Hz and more C. 31,5 8000 Hz D. there is no exact border E. there is no right answer
73. Professional defeats of eyes arise at influence electric magnetic field of a range: A. over high frequency (OHF)* B. ultra high frequency (UHF) C. high frequencies D. low frequencies E. there is no right answer
74. At work with electromagnetic sources of microwave radiation following defeats of eyes can develop: A. cataracta* B. nystagmus C. false shortsightedness D. farsightedness E. conjunctivitis
75. The kumulyation coefficient (КК) is defined as: A. relation LD50 at repeated introduction – to LD50 at unitary* B. relation lethal dose, LD 100 to LD50 C. relation LD84 to LD16 D. relation Limас to Limch E. relation LD50 ch – to LD100
76. The zone of chronic action (Zch) is defined as: A. relation Limас to Limch* B. relation LD50 to Limас C. relation Limас to LD50 D. relation Limch to Limас E. relation Limch to LC50
77. It is necessarywhether left with carcinogen manufactures annually to pass medical inspection: A. yes* B. no C. at will D. only workers of pension age E. only women of genital age
78. At receipt possibility in air of a working zone of harmful substances with keenly directional the mechanism of action sampling should be carried out: A. not less often than 1 time a month (1 and 2 classes) * B. not less often than 1 time a quarter C. constantly with application of systems of automatic control D. at will of administration of the enterprises E. there is no right answer
79. As the zone of sharp action is defined: A. relation LD50 to Limас * B. relation Limас to LD50 C. relation Limас to LC50 D. relation КК to Limch E. relation Limас to Limch
80. Primary medical institution at the enterprise is: A. medical sanitary part* B. factory sanatoriumdispensary C. laboratory D. corner of sanitary educational work E. the advisory medical centre
81. Who bears legal responsibility for registration for work without passage and reception of the conclusion of preliminary medical survey: A. employer * B. the head physician of a MSP of the enterprise C. the doctor on factory hygiene D. the doctor of the medical commission E. the shop therapist
82. Investigation of a case of a chronic occupational disease (poisoning) by the doctor on factory hygiene from the moment of reception of the notice on an establishment of the final diagnosis should be spent during: A. 7 days* B. 1 days C. 10 days D. taking into account free time of the doctor on factory hygiene E. at will of enterprise administration
83. Specify structural divisions of a medical sanitary part of industrial objects: A. shop health centres and factory polyclinic* B. hospital and drugstore C. hospital and dispensary D. sanatoriumdispensary and optics E. corner of sanitary educational work and medical assistant's point
84. The sharp occupational disease (poisoning) arises after: A. unitary (during one labour shift) influences harmful factor* B. repeated (during one labour shift) influences of harmful factors C. repeated and long (more than one labour shift) influences of harmful factors D. at nonobservance of safety precautions regulations E. there is no right answer
85. More the aeration complete definition sounds as: A. unorganized natural ventilation through windows and transom * B. the organised natural ventilation with application deflector C. operated mechanical ventilation with prevalence of inflow D. the natural, organised, operated ventilation E. airing (draught)
86. What minimum distance from eyes to the monitor screen: A. 40 sm* B. 20 sm C. 60 sm D. 80 sm E. has no value
87. What device can have harmful influence on health of the person: A. monitor* B. the system block C. the printer D. the modem E. mouse
88. As it is necessary to look at the monitor: A. from above down* B. at the leftto the right C. from below upwards D. on the righton the left E. without a difference
89. In what direction from the monitor harmful radiations are maximum: A. from the screen back* B. from the screen downwards C. from the screen forward D. from the screen upwards E. there is no right answer
90. As often it is necessary to do breaks in work at a hard work behind the computer: A. everyone 3 hours* B. not to do at all C. each hour D. each 5 hours E. at occurrence of unpleasant sensations in eyes
91. Specify the minimum duration of breaks at work behind the computer: A. 5-10 minute* B. 20-25 minutes C. 25-30 minutes D. 35-40 minutes E. there is no right answer
92. That it is necessary to do in breaks at work behind the computer: A. gymnastics for eye* B. to esteem the book C. to look at television D. gymnastics for feet E. to carry out a physical activity
93. What vitamins are necessary for using with food during a hard work behind the computer: A. A, B2, С * B. А, В6, F C. A, B12, D D. A, B, C, D E. С, D
94. What of methods of struggle against noise is the most radical: A. decrease in a source education * B. decrease by the way of distribution C. decrease by application antiphonary D. regular control over noise level E. periodic and preliminary medical surveys
95. Basic legislative documents concern: A. the constitution, the code of laws on work, legislation * B. sanitary code and rules C. instructions, reports and orders D. methodical letters, decisions, recommendations E. GOST (State standards of system of safety of work), Construction norms and rules (CNandR), instructions
96. Standard legislative documents concern: A. SanRan (Sanitary rules and norms), Construction norms and rules (CNandR) * B. safety rules, to health protection C. methodical letters, recommendations, orders D. rules on personal hygiene, the order E. recommendations about a healthy way of life, the decision
97. Instructivemethodological documents concern: A. methodical instructions, recommendations, instruction B. orders, orders, letters C. GOST, decisions, the order D. Sanitary rules, instructions, a quality monitoring E. Construction norms and rules (CNandR), forms of the account of sanctions
98. The doctor on factory hygiene should use what legislative document, if different normalised sizes of harmful factors are resulted: A. Sanitary rules and regulations * B. occupational safety standards systems C. Construction norms and rules (CNandR) D. ergonomic norms E. recommendations about the scientific organisation of work (SOW)
99. What from adopted legislative documents concern the basic: A. the code of laws on work, constitution * B. Sanitary code, instructions C. Building norms and rules, orders D. State standard, methodical letters E. methodical instructions, sanitary rules
100. As states of doctors of the CSSES on factory hygiene are estimated: A. 1 doctor on 10 thousand working* B. 1 doctor on 14 thousand working C. depending on category CSSES D. 1 doctor on 60 thousand working E. depending on quantity of the enterprises
101. As states of assistants to doctors on factory hygiene in CSSES are estimated: A. 1 assistant on 6 thousand working* B. 2 assistants on one doctor C. taking into account category CSSES D. 1 assistant on 30 thousand population E. depending on quantity of the enterprises
102. What document regulates registrationaccounting documentation CSSES: A. order Ministry of health of the Republic of Uzbekistan number 287* B. the instruction of static management C. order Ministry of health of the Republic of Uzbekistan number 200 D. decisions hakimyath E. decisions of city office of health care
103. Basic and standard legislative documents on hygiene and a labour safety have character: A. state character* B. departmental character C. recommendatory character D. administrative character E. medical character
104. Who is responsible for working conditions and a labour safety working: A. administration industrial object * B. the engineer under safety precautions C. doctor CSSES on factory hygiene D. the head physician of a medical sanitary part E. head physician CSSES
105. Who carries out the higher supervision of execution of laws on work according to the constitution: A. the general public prosecutor and bodies of office of public prosecutor* B. Ministry of health, regional department public health C. the Ministry of social welfare D. CSSES, the Ministry of labour E. trade unions, enterprise administration
106. Sanitary inspections are subdivided into what kinds on under control objects: A. planned, deepened, verifying and thematic observation * B. control, not planned and collective inspections C. single, general and periodic inspections D. stagebystage, precautionary and target inspections E. reusable and disposable inspections
107. As it is frequent doctors on factory hygiene profound sanitary inspections are carried out: A. 1 time in 4 year* B. quarterly C. 2 times a year D. as required E. on the instructions of higher bodies
108. What data is necessary for the doctor on factory hygiene for "plantask" drawing up: A. results profound sanitary observation * B. technological card of production C. the general layout, separate shops and sites D. results of verifying sanitary inspections E. materials of preliminary medical inspections
109. Who plans points of gaugings of production factors on the sketch: A. doctor CSSES on occupational hygiene* B. the engineer under safety precautions C. managing sanitaryandhygienic laboratory D. the foreman E. managing sanitary department
110. The primary goals of factory hygiene: A. creation of optimum working conditions, disease decrease, labour productivity increase* B. hygienic estimation of modernisation of the industry and in rural economy C. liquidation of occupational diseases, professional poisonings D. struggle against noise, vibration and ultraviolet radiation (UVR) E. hygienic estimation of new substances of a chemical and biological origin
111. The basic methods of factory hygiene: A. sanitary and hygienic, physiological, experimental* B. mathematical, chemical, polling methods C. technological, physical, clinical methods D. supervision method, toxicological, statistical methods E. immunological, radio isotope methods, questioning
112. On what groups industrial sanitary factors share: A. physical, chemical, biological, psycho-physiological methods* B. technological, variable, constant C. individual, collective, natural factors D. social, household, chemical methods E. pulse, faltering, constant methods
113. As legislative documents in the field of hygiene and a labour safety are subdivided: A. basic, fundamental, standard, instructive methodological documents* B. the recommended, instructive, confirmed documents C. decisions, orders, orders D. departmental, general purpose, branch documents E. personal, office, legal documents
114. Name the legislative document defining the rights and duties of health officers CSSES: A. law of the Republic of Uzbekistan «About the State sanitary inspection»* B. order Ministry of health of the Republic of Uzbekistan number 200 C. position about State san. inspection number 361 D. order Ministry of health of the Republic of Uzbekistan number 1075 E. instructions about imposing of sanctions
115. Indemnification for harmful working conditions is carried out by a way: A. reductions of the working day, additional leave * B. sanitary education, surcharges to the salary C. recommendations of increase of working capacity D. individual defence means (IDM), drawing up of recommendations about a labour safety E. medical inspections, the decision of tradeunion bodies
116. The plan of work of branch of factory hygiene CSSES consists of what basic sections: A. organizational methodical work, precautionary sanitary inspection (PSI), current sanitary inspection (CSI)* B. sanitary educational work, current sanitary inspection C. scientifically practical, organizational methodical work, precautionary sanitary inspection (PSI) D. ISP, laboratory tool work E. Scientifically methodical work, scientific researches
117. What kinds of works concern organizational methodical work: A. drawing up of plans (reports), preparation of inquiries, carrying out of meetings, workshop * B. preparation of materials for imposing of penalties, check of performance of decisions C. conduct Sanitary educational work, complex sanitary inspection D. carrying out of check of medical surveys by order of order Ministry of health of the Republic of Uzbekistan number 200 E. carrying out of investigation of cases of occupational diseases and working out of improving actions
118. The certificate of profound sanitary inspection consists of what parts: A. the passport part ascertaining, the conclusions, offer* B. passport part, the conclusion, use terms C. the descriptive part ascertaining, offers, reports of measurements D. ascertaining part, the conclusion, legal, the plan task E. descriptive part, graphic, finishing, dates of performance
119. In area total number of 60 thousand working equally. How many doctors on factory hygiene should be on the staff CSSES: A. 6* B. 10 C. 8 D. 4 E. 5
120. What number of assistants to the doctor in CSSES if the quantity working in the given administrative territory is equal 42 thousand persons should be: A. 7* B. 5 C. 10 D. 8 E. 4
121. Specify sequence of actions at imposing of sanctions: A. the inspection certificate, the report on sanitary infringement, the decision* B. the disease analysis, economic damage C. the final certificate, the plan task, the decision D. the sanitary description, results of laboratory analyses, the conclusion E. orders on CSSES and on under control object
122. That should undertake first of all doctor CSSES on factory hygiene at investigations of complaints of the population on a dust content from cotton factory: A. to find out size SPZ and presence clearing building* B. presence of others harmfulness in a sanitary protective zone (SPZ) C. gardening SPZ D. presence of sources of water supply at the enterprise E. to survey ventilation at factory
123. What measure of influence should be applied, if at the enterprise the offered improving measures on decrease in disease with time disability (TD) do not take root: A. stay * B. preparation of materials in office of public prosecutor C. quality check of carrying out of preliminary medical survey D. drawing up of the report on sanitary infringement E. quality check of carrying out of periodic medical survey
124. In what of the specified situations materials are represented to Office of public prosecutor: A. failure of a seal and renewal of work closed object* B. at default of sanitary instructions C. at nonpayment in time the penalty D. at complaints working on insufficient light exposure E. under the order
125. It is established that the plant makes emission in the atmosphere of ventilating air without cleaning at night. As the doctor on occupational health has to arrive: A. to present materials to prosecutor's office* B. to fine the plant manager C. to fine the safety engineer D. to suspend operation of object E. to give term for elimination of noted violations
126. Treat the major factors influencing health: A. natural, socioeconomic factors* B. condition of medical care, budget C. geographical features of the district, season of year D. population density in the territory of accommodation, a floor E. age and sex
127. What of the specified reasons most of all influence incidence of the working: A. working conditions, professional accessory * B. dietary and preventive foods C. providing with sanitary and household rooms, light climate D. existence of medical and sanitary part it is also sensible. points E. security of MIP, sanitary and educational work
128. The analysis of incidence on negotiability is carried most often out: A. with temporary disability* B. without disability C. for causes of death D. on the hospitalized incidence E. on material of periodic medical surveys
129. That is the main official document for the reporting on incidence under its negotiability: A. report on the reasons of temporary disability on a form of 16temporary disability (TD)* B. outpatient card 025/f C. report on causes of death D. incidence according to medical examinations E. the final act on periodic medical surveys
130. On the basis of what data on incidence are brought in a form 16TD: A. sicklist* B. registration of complaints C. periodic medical surveys D. report of the stationary help E. given to medical examination
131. For what terms the doctor on occupational health analyzes incidence: A. in a quarter, halfyear, 9 months, year * B. for the last 3 years C. for the current year D. in a halfyear in comparison with previous year E. over the last 5 years
132. That most often apply to determination of reliability in dynamics incidences with the temporary disability (TD): A. calculation of average and its mistake* B. calculation of shifts as a percentage C. average data quarterly D. dispensary analysis E. average data in a year
133. According to what data it is best of all to carry out the profound analysis of incidence: A. a leaf of the deep study accounting of incidence with TD* B. sicklist C. magazine of registration of negotiability, complaints D. final act of periodic medical surveys E. the report on the hospitalized incidence
134. In the profound analysis of incidence carry most often out: A. the analysis on shops, a profession and an experience* B. profound studying of working conditions C. drawing up leaf of the deep study account D. identification is long and often ill persons E. establishment of structure of incidence
135. Whose incidence is influenced more by family living conditions: A. women* B. teenagers C. engineering and administrative employees D. ancillary workers E. men
136. What of the specified diseases of eyes develop at influence of infrared radiation (radiant heat): A. cataract* B. glaucoma C. elektro phtalmia D. iridotsiklit E. miopiya
137. Whether body temperature at a sunstroke changes: A. changes* B. doesn't change C. decreases D. changes wavy E. shifts insignificant
138. What effect will be the leader at effect of vegetable dust: A. allergic effect* B. fibrogenny effect C. toxic effect D. embriotropny effect E. the irritating effect
139. At what effect of mineral dust the effect will be the leader: A. fibrogenny effect* B. the sensibilizing effect C. toxic effect D. the irritating effect E. local effect
140. Than, danger of influence of aerosols of mainly fibrogenny action generally is defined: A. content of crystal dioxide of silicon* B. big solubility in water C. small solubility in water D. electric charged E. weak phagocytosis
141. What most serious occupational disease causes dust: A. pneumoconiosis * B. laryngotracheitis C. glossit D. rhinitis E. gastritis
142. What of the listed bodies it is most of all sensitive to influence of fibrogenny dust: A. lungs * B. liver C. organs of vision D. organs of hearing E. digestive tract
143. What sharp the prof. disease arises from influence of ultraviolet radiation: A. elektroophtalmia * B. gripes C. cataract D. nictitating spasm E. iridotsyclitis
144. That generally influences the frequency of incidence of the persons working at a factory: A. production and professional conditions* B. age of workers C. general length of service D. condition of medical care E. family living conditions
145. The Incidence with TD is estimated: A. on Notkin's scale * B. on the level of growth of the general incidence C. on decrease in number of cases of disability D. on increase in number of days of disability E. by determination of reliability of shifts of incidences
146. Who has to have preliminary medical examination: A. all going to work with harmful and dangerous working conditions* B. all going to work on this production C. persons under 18 D. persons are more senior than 55 years E. the III groups having disability
147. Who has to have periodic medical examination: A. the same workers for whom are provided preliminary honey surveys* B. with length of service more than 5 years C. the workers consisting on the dispensary account D. it is long also often ill persons E. teenagers
148. Whom the right to make the diagnosis of the chronic prof. of a disease is granted: A. to the center of professional pathology, chair of professional diseases* B. to the doctor of fast and emergency aid C. to the doctor to the specialist of the central regional hospital D. to the doctor of medical and sanitary part E. to the shop therapist, district doctor
149. In what terms investigation of cases sharp and chronic is made A. *within 24 hours and 7 days* B. within 48 hours and 3 days C. within 48 hours and 10 days D. within 72 hours and 5 days E. on obtaining the notice on the prof. diseases
150. For final establishment of the diagnosis of the prof. of diseases it is necessary to consider: A. hygienic characteristic of working conditions* B. results preliminary med. Survey C. results periodic med. Survey D. carrying out introduction and repeated instructing E. existence of MIP and overalls
151. Investigation of cases of chronic prof. of poisonings and the prof. of diseases are carried out to what terms: A. within 7 days* B. within 2 days C. within 4 days D. within 3 days E. within one month
152. That such chemical thermal control: A. regulation by heat generation in an organism* B. redistribution of ways of return of heat organism C. heat exchange of an organism with environment D. change of nature of heat feeling E. change of size of a thermolysis
153. That such physical thermal control: A. regulation of heat exchange between an organism and environment* B. regulation of a microclimate on production C. use by working MIP D. change is warm feelings workers E. regulation of heat production in an organism
154. What disease can arise at long influence of low temperatures: A. bronchitis* B. keratitis C. neurasthenia D. cataract E. gastritis
155. What disease arises at insufficiency of UVR: A. light starvation* B. hyperthermia C. asthenic vegetative syndrome D. hypothermia E. dermatitis
156. As vibration sensitivity under the influence of local vibration changes: A. decreases* B. increases C. doesn't change D. decreases only at intensive vibration E. changes only with contributing factors
157. Microangioscopy allows: A. to find the first signs of influence of local vibration* B. to judge severity of labor process C. to judge an orientation of labor process D. to find influence of production noise E. to find signs of influence of an infrasound
158. The Infrasound has considerable impact: A. on a hearing and vestibular mechanism* B. on cardiovascular system C. on motor function of a stomach D. on a functional condition of a liver E. on secretory system
159. In what of the given cases it is necessary to define the content of chemicals in air of a working zone: A. at investigation of cases of professional poisonings* B. at the description of technological process C. at sanitary examination of construction projects D. at control of the course of construction E. according to the indication of administration of plant
160. What actions belong to the remote actions: A. mutagen, blastomogenic* B. skin, resorptive C. allergic, irritating D. sharp, chronic E. fibrogenic, local
161. What irritating gases can cause an instant deadly outcome: A. chlorine, hydrogen sulfide* B. nitrogen oxide, nitrous oxide C. ammonia, chlorine oxide D. nitrogen oxide, sulphurous gas E. sulfuric and sulphurous gases
162. What disease can arise at long influence of lead: A. saturnizm* B. hyperthermia C. mercurialism D. siderosis E. collagenases
163. What disease can cause mercury at its long receipt in an organism: A. mercurialism* B. saturnizm C. byssinosis D. scoliosis E. pneumoconiosis
164. That is the cornerstone of toxic influence of carbon monoxide: A. education in blood of a carboxyhemoglobin* B. denaturation of proteins C. education in methemoglobin blood D. oppression of activity of a cholinesterase of blood E. redused contents sulfhydryls of blood types
165. What effect the majority of organic solvents at sharp intoxication has: A. narcotic action* B. allergic action C. cardiotoxic action D. bronchospasmatic action E. theratogenic action
166. What chemical possesses the expressed material kumulyation: A. mercury* B. organic solvents C. nitrogen oxides D. polymeric substances E. sulphurous gas
167. The analysis of incidence with TD in a form 16TD didn't establish the reason of its growth for the last 2 years. As the doctor of CSSES has to arrive: A. to carry out the profound analysis of incidence of method of the politsevy account* B. to carry out the analysis of incidence quarterly C. to analyse dynamics of professional incidence D. to reveal it is long and often ill persons E. to define structure of incidence
168. What indicators are brought in a form 16TD and that thus is carried out: A. relative indicators, an encryption of diagnoses on classes of diseases* B. absolute measures, number year around of persons C. duration of a disease and floor D. transfer to disability, age E. transfer to other work, length of service
169. The diagnosis of the sharp lead prof. of poisoning is made by the emergency doctor, without clarification of circumstances of poisoning, the notice is sent to CSSES in a day. Give assessment of the situation: A. within 12 hours, the doctor arrived correctly* B. it is necessary to find out a profession and a place of work, to inform CSSES C. the doctor had no right to make the diagnosis professional. Poisonings D. for statement of the diagnosis consultation professional is necessary. Pathologist E. the notice is sent to CSSES in due time
170. Work of the doctor of CSSES on occupational health at the organization periodic medical surveys (PMS) generally includes: A. holding methodical seminars, coordination of the plan of PMS definition contingent* B. studying of hygienic working conditions C. drawing up test acts D. preparation of the order on a regional public health department E. carrying out the current supervision
171. What documentation is made out at investigation of cases of the prof. of poisonings and incidence, and in compliance with what document: A. act of investigation, order No. 200* B. the act of investigation by order of No. 700 C. the protocol on sanitary violation in a form No. 309/at D. the resolution on imposing of a penalty in a form No. 310/at E. the offer on discharge from work, the direction on TD
172. The worker of thermal shop addressed in a medical health center with complaints to fatigue, thirst, spasms in feet, feeling of a heat: A. hyperthermia* B. hypothermia C. hypodynamic frustration D. exhaustion E. acute respiratory viral disease
173. At periodic medical examination at a number of cutters of the wood are revealed the phenomenon of an angiospasm of the lower extremities, acrocyanosis, decrease in temperature of skin of feet and brushes. As it is possible to characterize this state: A. overcooling* B. hypodynamia C. exhaustion D. hyperthermia E. asthenic syndrome
174. What of the listed factors most of all influence developing of "dust pathology": A. concentration of dust, chemical composition, dispersion* B. form of dust particles and their consistence, specific weight C. ability to a phagocytosis in airways, solubility D. the irritating effect, degree of a phagocytosis, a form E. age, sex and individual sensitivity of the working
175. At periodic medical survey at a row working the radioelectronic industry are noted: sleep disorder, hypotonia, bradycardia, decrease in sight. On what it specifies, and that it is necessary to undertake: A. development of an illness from radio waves to direct on hospitalization* B. treatment of an asthenic vegetative syndrome to change a profession C. developed overfatigue to give extraordinary labor holiday D. before establishment of the diagnosis to investigate working conditions E. defeats of a hypothalamus to discharge of work
176. At periodic medical survey at a row working the radioelectronic industry are noted: sleep disorder, hypotonia, bradycardia, decrease in sight. On what it specifies, and that it is necessary to undertake: F. development of an illness from radio waves to direct on hospitalization* G. treatment of an asthenic vegetative syndrome to change a profession H. developed overfatigue to give extraordinary labor holiday I. before establishment of the diagnosis to investigate working conditions J. defeats of a hypothalamus to discharge of work
177. At what situations development of light starvation and that is the reason is possible: A. work underground, in bases of natural lighting* B. work in a night shift, insufficient illumination C. hot climate, surplus of infrared radiation D. work in refrigerators, the cooling microclimate E. rotational operating mode, overfatigue.
178. Principles of rationing of production noise: A. influences type of work, characteristic and noise level, time* B. thresholds of acoustical sensitivity, influence time, action on the person C. condition of the central nervous system, organs of hearing, influence time D. changes in the acoustic analyzer, nature of noise, contributing factors E. impulsive impact on an organ of hearing, influence time
179. What of methods, against noise is the most radical: A. decrease in an education source* B. decrease on the way of distribution C. decrease by application of antiphons D. systematic control over noise level E. periodic and preliminary medical surveys
180. Specify quantity of stages PSI during construction: A. four* B. rub C. five D. two E. one
181. What document is formed the doctor on occupational health at a choice of the land plot and examination of construction projects: A. conclusion* B. act C. plan task D. resolution E. protocol
182. What document is formed the doctor on occupational health at supervision of the course of construction and at reception in operation: A. act * B. resolution C. protocol D. conclusion E. coordination
183. What types of legislative documents are generally used when carrying out PSI behind design and construction: A. Construction Norms and Regulations, Sanitary rules and regulations * B. instructions, orders C. methodical instructions D. law on protection of a subsoil, atmospheric air E. State standard specifications
184. What types of legislative documents are used when carrying out PSI behind new equipment, technology, etc.: A. resolution No. 361 B. Sanitary rules and regulations, state standard specifications* C. order No. 1075 and 231 D. instructions and resolutions of higher bodies E. code of laws on work, Construction Norms and Regulations
185. How many stages PSI behind new equipment, technology: A. three* B. one C. four D. two E. five
186. PSI Terms behind building of production objects: A. 1 quarterly* B. once a year C. 2 times a year D. during the prestarting period E. monthly
187. PSI terms behind objects under construction during the prestarting period: A. monthly* B. once a year C. 2 times a year D. in 2 weeks prior to the working commission E. quarterly
188. How many classes of the sanitary protection zone (SPZ): A. five* B. rub C. two D. one E. four
189. Than the production microclimate is characterized: A. temperature, humidity, mobility of air and thermal radiation* B. relative humidity, radiation, thermal capacity C. temperature, atmospheric pressure, heat conductivity D. temperature, air movement speed, heat production, radiation E. temperature, absolute humidity, barometric pressure, sunniness of climate
190. On what of the provided documents the assessment of a production microclimate is carried out: A. Sanitary rules and norms No. 020306* B. Sanitary rules and norms No. 012001 C. Sanitary rules and norms No. 012201 D. Construction norms and rules 2.01.0598 E. GOST 12.1.00588
191. That is considered by sanitary standards at an assessment of infrared radiation: A. the size of the irradiated surface of the body working* B. intensity of thermal radiation C. existence of contributing factors D. existence of filters E. construction and climatic zone
192. What temperature of external air belongs to the warm period of year: A. it is higher than *100C * B. 100C and below C. 50C and below D. from *200C and above E. it is higher than *200C
193. What temperature of external air belongs to the cold period of year: A. 100C and below* B. it is higher than *100C C. it is lower than *150C D. from 00C to 150C E. it is lower than 100C
194. The doctor by consideration of construction projects compares the designed meteoconditions: A. with optimum sanitary standards* B. with the upper admissible bounds C. with the lower admissible bounds D. with average values E. with norms on constant workplaces
195. That is the screen for electromagnetic fields of radio frequencies (EMRF): A. metal (except tin)* B. glass C. brick D. concrete E. tree
196. What there are screens from EMRF: A. metal* B. the cardboard C. the transparent D. the wooden E. the mobile
197. As protection of the population against EMRF is carried out: A. protection in distance* B. use of filters in dwellings C. prohibition of application of EMRF in settlements D. sanitary and educational work E. determination of the operating EMRF levels in a residential zone
198. What length electromagnetic oscillations belong to an ultraviolet range: A. 400200 nanometers* B. 1 cm1 of mm C. 310 mm D. 180 nanometers130 of nanometer E. 760 nanometers1 of mm
199. What admissible level of intensity of noise of dBA on production: A. 80* B. 100 C. 85 D. 110 E. 95
200. The infrasound – mechanical oscillations of the air environment frequency: A. it is lower than 20 Hz* B. more than 20 kHz C. it is lower than 35 Hz D. 300500 Hz E. more than 109 Hz
201. Than the infrasound is characterized: A. amplitude, intensity, wavelength, frequency* B. power, amplitude, speed C. oscillatory speed, frequency, pressure D. acceleration, pressure E. electric charged, ionization, frequency
202. At what introduction of actions possibility of impact of chemical on the working is excluded: A. remote control* B. mechanization C. allexchange ventilation D. providing MIP E. continuity of technological process
203. That such aeration: A. the natural organized and operated air exchange* B. natural airing through windows and doors C. thermal air veils D. supply of external air to the room E. use of remote air for the purpose of economy
204. That such ventilation productivity: A. the volume of the air given or deleted from the room in m3/hour* B. speed of the movement of air in an air duct C. compliance of a physical condition of air to hygienic requirements D. physical a condition of the given air E. extent of purification of air before emission in the atmosphere
205. How to estimate efficiency of the designed local exhaust mechanical ventilation: A. on speed in the soakingup opening of exhaust ventilation* B. according to sanitary standards C. in the settlement way on a formula D. having calculated air balance E. according to the analysis of the air environment
206. What type of shelter of local exhaust ventilation is most effective: A. hood* B. onboard suctions C. exhaust umbrella D. exhaust panels E. casing
207. That such air balance: A. amount of stitched air equally to quantity deleted* B. the amount of stitched air is less than deleted C. the amount of stitched air is more than deleted D. temperature of the deleted air is equal to temperature of the given air E. the stitched and deleted air moisture content is identical
208. For what the general forced ventilation is projected: A. for dilution of the remained desutility in shop and compensation of remote air* B. for creation of optimum air temperature C. for fight against excess moisture D. for the technological purposes E. for heating of rooms
209. Kinds of production lighting: A. artificial, natural, combined* B. side, top, combined C. luminescent, incandescence D. emergency, on duty, working E. the general, combined, top
210. That such illumination: A. area density of a light stream* B. the light stream reflected from a surface C. density of a light stream in space D. the part of radiant energy causing light feelings in an eye E. the light stream reflected from a surface towards an eye
211. What normative documents the health officer at an illumination assessment on production uses: A. Construction norms and rules 2.04.0598* B. Sanitary rules 275 71 C. GOST 12.1.00588 D. Sanitary rules 408886 E. Sanitary rules 322385
212. In what indicators the combined lighting is normalized: A. coefficient of natural lighting (CNL)* B. Luxury C. Lumen D. bit/sec. E. candela
213. That such local lighting: A. the lighting concentrating a light stream directly on workplaces* B. lighting for further work at an emergency shutdown C. lighting in a time off D. lighting of the room natural and artificial light E. lighting for evacuation of people
214. That such combined lighting: A. lighting at which light gets through svetoproyoma in external walls* B. combination of the top and side lighting C. combination of natural and artificial lighting D. lighting at which the local is added to the general lighting E. emergency and emergency lighting
215. As classify lamps by distribution of a light stream: A. the direct, scattered and reflected light* B. the closed, open, direct lamps C. moistureproof, dustproof lamps D. from hostile environment, the general lamps E. the local, combined lamps
216. In what document standards of illumination are stated: A. Construction norms and rules 2.04.0598* B. GOST 12.1.00588 C. GOST 12.1.00883 D. order No. 200 E. GOST 12.1.08884
217. What of calculation methods it is most often applied at examination of projects of production lighting to determination of illumination: A. dot method* B. illuminometer method C. efficiency method D. on comparison scales E. Watt method
218. By what method count illumination from emergency lighting: A. dot or Watt method* B. by method of linear isoluxury C. by a tool method D. by an efficiency method E. by calculation of total power
219. What share illumination from lamps of the general lighting at the combined lighting has to make: A. 10% of norm for the combined lighting* B. 5% of norm of the general lighting C. 0,5% of norm D. 12% of norm E. no more than 300 lx on a working surface
220. That such master plan: A. the plan of placement of buildings and constructions in the territory of the enterprise* B. site plan where building of this object is planned C. plan of improvement of a sanitary protection zone D. the plan of an arrangement of the enterprise in a selitebny zone E. scheme of an arrangement of water supply and treatment facilities
221. That such situational plan: A. the plan of an arrangement of a construction object on the district, its features and the relation of object to residential quarters* B. the plan of object with the indication of production and household rooms C. the plan of mutual placement of shops and office buildings taking into account a wind rose D. the scheme of placement of production buildings and treatment facilities in the territory E. graphic representation of thoroughfares of the movement of people and materials
222. What doctors carry out work on branch of the land plot for production objects: A. department of occupational health and municipal hygiene* B. epidemiologist, shop therapist C. department of hygiene of food and hygiene of children and teenagers D. .infectious diseases doctor, epidemiologist E. hygienists of all specialties
223. As production objects in relation to inhabited massifs have to settle down taking into account a wind rose: A. alee* B. from a windward side C. at distance of 500 m D. at distance of 1000 m E. without the direction of a wind
224. What types of water consumption can be on production object: A. household water use consumption, technological water consumption* B. for the technical purposes and an irrigation C. for dining rooms and household rooms D. for fire extinguishing, fight against dust E. for watering of the territory and green plantings
225. What household room is created for prevention of light starvation: A. fotary* B. inhalation C. solar bathtubs D. manual and foot bathtubs E. psychological unloading
226. Than the quantity of shower grids and washing cranes is defined: A. number of the working persons in the most numerous change* B. number working in two adjacent changes C. all number of the working persons D. 1 grid of 10 workers pays off E. pays off depending on number of the working women
227. What lighting has to be provided surely in household rooms irrespective of number of changes: A. artificial lighting* B. natural lighting C. the combined lighting D. local lighting E. natural, side lighting
228. What problem is solved by the doctor of CSSES, participating in structure of the commission on branch of the land plot under production construction: A. possibility of placement of object on this district from a hygienic position* B. estimates sufficiency of an output of a source of water supply C. possibility of placement of SPZ D. possibility of construction of treatment facilities and a sewage disposal in a reservoir E. protection from pollution of underground waters production waste.
229. What problem is solved by the doctor on occupational health at sanitary examination of the master plan of production object: A. estimates correctness of placement of shops and constructions on territories, sufficiency of water supply, the sewerage* B. draws the conclusion about correctness of placement of object on the district C. estimates sufficiency of SPZ D. defines sufficiency of an output of a source of water supply for the technical purposes E. draws the conclusion about correctness of placement only of producing departments
230. Objects of the precautionary sanitary inspection (PSI) on occupational health: A. building of production objects, new equipment and technology, new chemicals* B. reconstruction of objects of education, equipment, lighting C. expansion of medical object, building of ventilation D. construction of constructions for sewage treatment E. building of improving objects
231. The second stage PSI behind construction: A. examination of projects* B. supervision in the course of construction C. examination of data on water supply of the sewerage D. an assessment of an arrangement of the enterprise on the district in a selitebny zone E. participation in the working commission
232. The third stage PSI behind construction: A. in the course of construction* B. at a choice of the land plot C. by consideration of treatment facilities D. at examination of the master plan E. at design of constructions on protection of atmospheric air
233. The fourth stage PSI behind construction: A. reception in operation of the constructed objects* B. consideration of construction projects C. consideration of measures for protection of atmospheric air D. examination of the situational plan and water supply E. consideration of specifications on sewage treatment
234. What problems are solved by the doctor on occupational health at a choice of the land plot under construction: A. possibility of placement on a platform of this production* B. sufficiency of the sizes of a platform C. quantity working and SOW D. sufficiency of financing E. implementation of requirements of the customer
235. What main objectives are solved by the doctor on occupational health at supervision of the construction course: A. compliance of the course of construction to the project, control over working conditions of builders* B. an assessment of correctness of placement of object in the territory C. compliance of the course of construction to the approved schedule D. hygienic assessment of extent of mechanization of works E. compliance of household rooms under construction to the project and extent of gardening
236. What parts of the working draft on construction are considered by the doctor on occupational health: A. master plan, lighting, ventilation, household rooms* B. situational plan, sanitary construction C. budget documentation, NOW D. staging of design, schedule of financing E. requirements to improvement of a platform, cleaning of constructions
237. What main objective of the doctor on occupational health participating in the working commission at delivery of object in operation: A. assessment of efficiency of improving actions and sufficiency of illumination* B. drawing up the conclusion about compliance of the constructed object to the project C. verification of actions for fight against harmful factors D. check of compliance of processing equipment to projects E. check of compliance of the equipment of household rooms to hygienic requirements
238. What problems are solved during the work of the state inspection: A. the conclusion about possibility of object in operation* B. improvement of the territory of the enterprise C. condition of SPZ D. existence of sanitary devices E. environmental conservation
239. The first stage PSI behind new equipment, technology it: A. consideration of the specifications and technical documentation* B. existence of measures for safety measures C. measurement of harmful production factors D. consideration of drawings of the new equipment E. consideration of techniques of definition of harmful factors.
240. The second stage PSI behind new equipment, technology it: A. participation in production tests* B. examination of design decisions C. passport data of modernization D. approbation of new methods of definition E. test of the new means of individual protection (MIP) and overalls
241. The third stage PSI behind new equipment, technology it: A. conclusion about possibility of acceptance for operation of new equipment, technology* B. consideration of standard documentation C. examination of passport data of new chemicals D. assessment of efficiency, NOW E. existence of sanitary devices
242. Size SPZ depends: A. from character and quantity of the allocated vrednost, branch and the power of production object* B. from a wind rose and existence of reservoirs C. from a land relief and percent of gardening D. from aero climatic features of the district E. from existence of superficial reservoirs and treatment facilities
243. When rationing a production microclimate are considered: A. the period of year, weight of the performed work, climatic features of the district* B. season of year, time of day C. weight of the performed work, nature of technological process D. the accompanying production factors E. professions of the working persons, intensity of their work
244. That it is necessary to make first of all at a hygienic assessment of a microclimate on production: A. studying of technological process and clarification of sources of this factor* B. measurement of air temperature and surfaces of sources of heat C. drawing up scheme sketch of the room and indication of time of measurement D. carrying out necessary calculations and comparison to norms E. registration of results of measurement by the protocol and recommendation of MIP
245. That is considered at hygienic rationing of production dust: A. content of dioxide of silicon, toxic properties* B. maintenance of mineral part, dispersion C. degree of dispersion and wettability D. electric charged and firmness of substance E. form of dust particles, specific surface
246. What purpose of production ventilation from a hygienic position: A. for fight against surpluses of heat and moisture, with harmful couples, gases and dust* B. catching and utilization of valuable production wastes C. providing the optimum course of technological process D. for prevention of emergencies and their elimination E. construction of air flourishes
247. How to estimate ventilation productivity at sanitary examination of projects of ventilation: A. correctness of a relative positioning of places of a fence and emission of air* B. by test calculations and comparison to the data specified in the project C. comparison of data of productivity with hygienic norms D. determination of efficiency of ventilation E. comparison to the speed of the movement of air in and out of the room
248. What task of the doctor of occupational health at sanitary examination of the project of ventilation: A. to establish possibility of providing with ventilation of a condition of the air environment meeting hygienic requirements* B. whether to check ventilating devices from all harmful sites of work are designed C. to examine a technical characteristics вент. Units D. to calculate frequency rate of air exchange in shop and existence of balance of air exchange E. to check correctness of an arrangement of air ducts in shop and air intake places.
249. What ventilation on fight against harmful couples and gases is recommended: A. mechanical local exhaust and general forced ventilation* B. allexchange, air veils C. local forced and general exhaust ventilation D. air choking, air veils E. aeration, air veils
250. Than the choice of a light source and type of lamps is defined: A. kind of work, conditions of the air environment, sizes of the room and level of rated illumination* B. special requirements to determination of color, in reflection coefficient C. features of work and coloring of the room and equipment D. profitability of a light source, spectral structure E. technological process and orientation of a light stream
251. What purpose of lighting fixtures: A. redistribution of a light stream, protection of eyes against brightness* B. protection of eyes against gases and vapors C. increase in light return of lamps, reduction of brightness D. protection of workers against electric traumas E. increase in profitability of lamps, validity period
252. For what purposes at calculation of the projected illumination the stock coefficient is entered: A. for compensation of decrease in illumination at air pollution and operation of lamps* B. for obtaining size of the minimum illumination C. taking into account aging of lamps in process of operation and their burnout D. for determination of specific power of lamps E. for determination of relative illumination from all types of lighting
253. What requires obligatory design of natural production lighting: A. redistribution of a light stream, protection of eyes against brightness* B. that carrying out work only at this spectrum of the light is possible C. reduction of the prof. of poisonings on production D. creation of constant level of illumination on workplaces E. reduction of number of persons of the lighting installations occupied in operation
254. Size SPZ at placement of production objects depends: A. from branch and enterprise capacity, the allocated harmful* B. from placement on a platform of places on purification of ventilating air C. from the amount of improvement and gardening of the territory of the enterprise D. from number of storeys of shops, household rooms and places of storage of waste E. from a relative positioning of the enterprise with other production objects
255. The structure of household rooms depends: A. from features of technological process and harmful production factors* B. from number working and number of changes C. from adverse weather conditions D. intensity of radiative and thermal effects E. intensity of influence of dust, vibration and EMF
256. The quantity of lockers of storage of clothes in the wardrobe depends: A. from total number working in all changes* B. from number working in two most numerous changes C. from number of the working persons in the most numerous change D. from number of the working persons in a day shift E. from features of technological process and production vrednost
257. What main measures for environment protection have to be provided in the construction project the ginning of plants: A. sufficiency of SPZ, purification of ventilating air* B. constructions on purification of air of gases C. a cleaning construction for chemical water purification D. actions for reduction of the content of dust in air of production rooms E. special rooms for dust removal of overalls
258. Whether it is possible to build the industrial enterprises in a residential zone: A. it is possible, but only the enterprises belonging to 4 and to the 5th class, which aren't marking out harm* B. yes, if they aren't noise sources C. no, under no circumstances D. yes, if only 1 harmful production factor is marked out E. yes, if SPZ is planted trees and shrubs
259. The working commission established inefficient work of ventilation and insufficient illumination. What decision the chief physician of CSSES has to make during the work in State commission at a stage of reception of production object in operation: A. won't sign the act of a state quality control of object* B. will sign the act of transfer of the letter of guarantee by builders C. will coordinate, but when making the letter of guarantee by builders D. will sign, but will specify the term of elimination of shortcomings E. will sign on condition of khokimiyat's consent
260. The working commission noted excess of the maximumpermissible concentration (MPC) of dust and air temperature 50C higher than norm. Whether the doctor has to sign the act of the working commission if all other members signed it: A. isn't present* B. yes C. yes, on condition of elimination of shortcomings D. will write own opinion E. will demand retesting
261. At sanitary examination of the master plan of construction of engineering plant lack of emergency lighting in places of storage of waste and evacuation lighting in producing departments is revealed. Whether there can be it the basis for a project nonagreement: A. can* B. can't C. can, but only at coordination with the customer D. can, but only when making obligations for elimination of shortcomings E. the project is subject to return to the customer
262. In the prestarting period of building of production object deviations from the project and violation of the schedule of construction of sanitary devices were found. As the doctor on occupational health and as often has to control object has to arrive: A. to suspend construction, control once a month* B. to establish term for elimination of violations, control quarterly C. to impose a penalty on the site manager, control 2 times a quarter D. to make the protocol on sanitary violation, control of 1 times a halfyear E. to develop offers on violation elimination, control once a year
263. Whether the doctor of CSSES can refuse the signature in the act of acceptance of object in operation: A. can, in the presence of the act of the working commission, but with motivation of refusal* B. can, without any explanations C. can't as the act was signed by other members of the commission D. can if the act wasn't signed by some members of the commission E. can't if there is no letter of guarantee of builders.
264. In the construction project the ventilation providing admissible norms of a microclimate in shop is designed. Whether it is correct and why: A. isn't present as parameters of a microclimate have to correspond to optimum levels* B. no, as the microclimate has to meet среднесменные smean standards C. yes, designed in the project, meets sanitary standards D. no, as features of climate aren't considered E. no, as weight of work isn't considered
265. Point to sequence of stages of hygienic rationing of chemicals in air of a working zone: A. development of the approximate and safe level of substance, maximum concentration limit, correction of maximum concentration limit* B. establishment of a zone of chronic action, threshold of specific and sharp action C. establishment of SPZ, waiting time, correction of the maximumpermissible concentration (MPC) D. having put on justification, coefficient of a stock and maximum concentration limit E. justification of maximum concentration limit, establishment of SPZ and conditions of use of chemical
266. What of the specified parameters are most important for determination of danger of a chemical compound: A. zones of an akuta and zone chronicle* B. top parameter of toxicity C. size of threshold concentration D. degree of the irritating effect, allergic action E. expressiveness of local action and resorptive of substance
267. How many classes of chemicals on degrees of danger and their name: A. 4 classes – are extraordinary, high, moderate also lowdangerous substances* B. 3 classes – organic substances, inorganic, element organic C. 3 classes – the substances operating through skin, respiratory organs and the digestive tract (DT) D. 4 classes – the alltoxic, irritating, sensibilizing, dangerous substances E. 3 classes – mutagen, embryotropic and cardiotoxic substances
268. The main measures for environmental protection from a biological factor: A. existence of SPZ, disinfecting of ventilating air and sewage* B. cleaning of technological emissions, zoning of the territory C. prohibition of cleaning of overalls in house conditions, existence of SPZ D. control over working conditions, tightness E. work on hygienic education of workers, MIP, organization of household rooms
269. Specify sequence of work of the doctor of CSSES when carrying out PSI behind production ventilation: A. sanitary examination of projects, control over the construction course, an efficiency assessment at reception in operation* B. assessment of the correct organization of system of ventilation and its efficiency C. control over timeliness of construction of all parts of ventilating system D. an assessment of productivity and efficiency of ventilation after installation E. hygienic assessment of a physical and chemical composition of air
270. Specify the correct sequence of value of ventilation among the listed actions for improvement of a physical state and chemical composition of air of production rooms: A. automation, isolation, sealing, ventilation* B. ventilation, sealing, automation, isolation C. sealing, isolation, ventilation, automation D. isolation, ventilation, sealing, automation E. automation, ventilation, isolation, sealing
271. At hygienic rationing of artificial lighting consider: A. accuracy of visual work, contrast, background, system of lighting* B. degree of tension of an organ of vision, danger of receiving injuries C. sunniness coefficient, duration of the working day, contrast D. coefficient of light climate, stock coefficient, background E. lamp type, system of lighting, brightness of surrounding surfaces
272. What conclusion is drawn by the doctor according to the construction project if there are separate shortcomings according to general and situational plans: A. the project won't be agreed* B. the project will be agreed C. the project will be agreed on condition of elimination of shortcomings D. the project is sent to completion E. ventilation and lighting will be coordinated
273. Who carries out preliminary and periodic medical examination: A. medical and sanitary part, territorial treatmentandprophylactic office* B. shop therapist C. doctor of a health center, doctor of occupational health D. doctor obstetriciangynecologist, dermatologist E. doctors of clinical chairs
274. Who for establishment of the prof. of diseases makes the hygienic characteristic of working conditions: A. the doctor of CSSES on occupational health* B. safety engineer C. chief physician of MSCh D. pathologist E. shop therapist
275. What device take temperature and relative humidity of air in the presence of a source of infrared radiation: A. Assman's psychrometer* B. Augustus's psychrometer C. hygrometer D. actinometer E. thermoanemometer
276. What type of not ionizing radiation is measured by the actinometer: A. infrared radiation* B. radio wave radiation C. ultraviolet radiation D. superhighfrequency radiation E. laser radiation
277. On what quantity of the working the number of cases of occupational diseases pays off: A. on 1000 working persons* B. on all working C. on the working persons with this harm D. on the all year working workers E. on 500 working persons, but only men or women
278. What device use for record of relative humidity in production rooms within a day: A. hygrograph* B. oscillograph C. kimograf D. barograph E. vibrocount
279. In what units air temperature is taken: A. in degrees Celsius (°C)* B. in kal/cm2, min C. in to /kal D. in Watts E. in %
280. What device measures small speeds of the movement of air: A. electrothermoanemometer, cathathermometer* B. cup anemometer C. actinometer D. barotermohygrometer E. radiometer
281. What device measures big speeds of the movement of air: A. cup anemometer* B. cathathermometer C. Assman's psychrometer D. actinometer E. potentiometer
282. By what device the total thermolysis is defined: A. bioheat meter* B. actinometer C. thermoanemometer D. electrothermoanemometer E. medical thermometer
283. What device measures return of heat by an organism by radiation: A. radiometer* B. heat meter C. actinometer D. anemometer E. psychrometer
284. The simplest method of definition of a thermolysis of an organism by a potoispareniye under production conditions: A. potoispareniye indicator* B. hronorefleksometry C. hygrometer, radiometer D. bioheat meter E. by method of filtering notebooks.
285. What device takes skin temperature: A. medical electrothermometer* B. spirit thermometer C. mercury thermometer D. bioheat meter E. radiometer
286. What device time of reflex reaction to thermal influence is defined: A. chronoreflecsometery* B. electrothermoanemometer C. differential radiometer actinometer D. actinometer E. heat meter
287. What main ways of return of heat in comfortable meteoconditions: A. by a conduction and convection* B. only with the exhaled air C. by radiation and with the exhaled air D. by a conduction and a sweat evaporation E. by a sweat evaporation and radiation
288. What main ways of return of heat an organism in environment at high temperature of air: A. evaporation of moisture from a surface of skin and lungs* B. conduction, convection C. radiation, carrying out D. conduction, radiation E. conduction, convection, radiation
289. What way there is a thermolysis at low air temperature: A. radiation, convection* B. evaporation, radiation C. a conduction with the exhaled air D. conduction, sweat evoporation E. evaporation of moisture from a surface of skin and lungs
290. That influences strengthening of a thermolysis of an organism by radiation: A. temperature of surrounding surfaces* B. temperature and humidity of air C. humidity and speed of the movement of air D. thermal insulation of surrounding subjects E. temperature and speed of the movement of air
291. Whether lighting ability of a body depends on air temperature: A. isn't present* B. yes C. sometimes D. partially E. depends depending on coloring of surrounding surfaces
292. As dust by origin is classified: A. the organic, inorganic, mixed dust* B. natural, vegetable dust C. disintegration aerosol, soil dust D. condensation aerosol, mineral dust E. chemical, synthetic dust
293. In what cases it is necessary to define an air dust content: A. at an assessment of solubility and dispersion of dust* B. at planned inspection, investigation of occupational diseases, at acceptance of object in operation C. at an assessment of weight and intensity of work, at reception of new equipment D. at determination of dispersion, solubility and a volatility of dust E. by drawing up the characteristic of working conditions, efficiency of MIP
294. What method is used in practice for a quantitative assessment of a dust content of air of a working zone: A. weight method* B. spectrophotometric method C. sedimentation method D. chromatographic method E. chemical method
295. On what groups the biological factor shares: A. natural, industrial* B. constant, changeable C. industrial and industrial D. uniform, nonuniform E. widespread and single
296. Call the most effective actions for influence of infrared radiation: A. shielding, air choking* B. aeration and ventilation C. correct arrangement of employment and medical surveys D. use of MIP, health education E. periodic medical survey
297. Negative sides of application of microbiological means of protection of plants: A. increase in an semination of environment, allergic and toxic effects* B. need of restriction of application near settlements C. weak mechanization of receiving biological products D. weak mechanization of application of biological products E. allergic and toxic effects
298. For what purpose on production production ventilation will be organized: A. for fight there is a lot of heat, for fight against couples, gases and dust* B. catching and utilization of valuable production wastes C. for prevention of emergencies and their elimination D. a construction of air veils at an entrance to shop E. for reduction of a thermolysis F. air veils
299. The terms used for names of occupational diseases from lead: A. saturnizm, mikrosaturnizm* B. byssinosis, allergy C. pneumoconiosis, bronchitis D. bronchial asthma, pneumonia E. dermatitis
300. Call the document making for the reporting on incidence working on negotiability: A. report on the reasons of temporary disability on a form 16DT* B. outpatient card 025/f C. report on causes of death D. incidence according to medical examinations E. the final act on periodic medical surveys
301. That is primary document when filling a form 16DT: A. sicklist* B. registration of complaints C. results of periodic medical survey D. report of the stationary help E. these medical examinations
302. Specify terms for which the health officer on occupational health of CSSES carries out the comparative analysis of incidence with the temporary disability (TD): A. quarter, halfyear, 9 months, year* B. for the last 3 years C. current year D. halfyear in comparison with previous year E. over the last 5 years
303. What indicators are most often applied in case of determination of reliability of indicators of incidence: A. calculation of average and its mistake* B. calculation of shifts as a percentage C. average data quarterly D. dispensary analysis E. average data in a year
304. What data of the document allow to carry out the profound analysis of incidence with temporary disability: A. a leaf of the deep study accounting of incidence with DT* B. sicklist C. magazine of registration of negotiability, complaints D. final act of periodic medical surveys E. report on hospitalization incidence
305. The incidence deepened the analysis carry out on the basis: A. the analysis on shops, a profession and an experience* B. profound studying of working conditions C. drawing up leaf of the deep study account D. identification is long and often ill persons E. establishment of structure of incidence
306. Family living conditions affect on health of the working women more: A. women* B. men C. teenagers D. engineering and administrative employees E. ancillary workers
307. At influence of infrared radiation development is possible: A. cataracta* B. glaucoma C. elektrophtalmia D. iridotsiklitis E. miopia
308. As body temperature at a sunstroke changes: A. increases* B. changes C. decreases D. changes wavy E. shifts insignificant
309. At influence of dust of a phytogenesis the following effect is more often possible: A. allergic* B. fibrogenic C. the toxic D. embriotropic E. the irritating
310. The following effect can be the leader conducting at influence of dust of a mineral origin: A. fibrogenic* B. the sensibilizing C. the toxic D. the irritating E. the local
311. Danger of influence of aerosols of mainly fibrogenic action speaks: A. content of crystal dioxide of silicon* B. big solubility in water C. small solubility in water D. electric charged E. weak phagocytosis
312. What the heaviest the prof. the disease causes dust: A. pneumoconiosis* B. laryngotracheitis C. glossit D. rhinitis E. gastritis
313. What of the listed bodies it is most of all sensitive to fibrogenny dust: A. lungs* B. liver C. organs of vision D. organs of hearing E. digestive tract
314. What sharp the prof. the disease arises from influence of UFradiation: A. elektroophtalmia* B. gripes C. cataract D. nictitating spasm E. iridotsyclitis
315. That generally influences the frequency of incidence of the working: A. production and professional conditions* B. age of the working C. general length of service D. condition of medical care E. family living conditions
316. On the basis of what the incidence with temporary disability is estimated: A. Notkin's scales* B. level of growth of the general incidence C. decrease in number of cases of disability D. increases in number of days of disability E. method of determination of reliability of shifts of an incidence
317. List persons who have to have preliminary medical examination at revenues to work: A. all going to work with harmful and dangerous working conditions* B. all going to work on this production C. persons under 18 D. persons are more senior than 55 years E. the III groups having disability
318. Workers have to have periodic medical examination: A. the same workers for whom preliminary medical surveys are provided* B. with length of service more than 5 years C. consisting on the dispensary account D. it is long and often ill E. teenagers
319. MIP for protection of respiratory organs at influence of toxic vapors and gases: A. the industrial filtering and isolating gas masks* B. respirators "Petal" C. respirators "Aster2", wadded and gauze bandage D. cottongauze bandage E. pneumohelmets
320. For fight against what harm gas masks are used: A. gases, vapors* B. dust, fog C. fog, disintegration aerosol D. smoke, disintegration aerosol E. EMF
321. Types of gas masks: A. filtering, isolating* B. internal, external C. the opened, closed type D. valvate, artificial E. mechanical, hermetic
322. MIP from impact of production noise: A. earphones, antiphons, earplugs* B. helmets, cap comforters, pneumohelmets C. guards and masks with light filters D. gauze and wadded tampons E. audionoise meters, helmets, berets
323. For fight against what harm it is used respirators: A. dust* B. gases C. fog D. smoke E. steam
324. Points for protection of eyes against EMPR: A. mesh, metalized* B. with small coefficient of a transmission of light, closed C. closed, reflecting D. opened, absorbing E. scaly, driver's
325. Whether is use of MIP the most radical measure in system of improving actions on production: A. isn't present* B. yes C. partially D. sometimes E. depends on conditions on production
326. The method for definition of energy consumption during the work: A. indirect calorimetric* B. spectra photometric C. ergo metric D. gas chromatography E. direct calorimetric
327. Work classification is: A. physical, intellectual* B. automated, manual C. monotonous, uninteresting D. manual, mechanized E. conveyor, simple
328. That is considered in production classification of pesticides: A. object of appointment* B. firmness C. method of application D. aggregate state E. solubility
329. The term (advanced in years) at which pesticide belongs to very resistant substances: A. more than 2 years* B. 7 years C. 1 year D. 0,51 year E. 10 years
330. At what stages of works with pesticides MIP have to be used: A. on all* B. at 1 stage C. at the 2nd stage D. at the 3rd stage E. at use of pesticides 1 and 2 of a class of danger
331. Entomophages are: A. the useful insects destroying wreckers* B. bloodsicking insects C. natural, biological, active agents D. insects in a stage of larvae E. any insects who are made multiple copies in artificial conditions
332. Who responsible for implementation of all requirements and regulations of use of pesticides: A. producer of agricultural production* B. producer of pesticides C. CSSES D. nature protection bodies E. the person which gave a dignity conclusion
333. Who provides the working MIP: A. administration of the enterprise* B. sanitary and epidemic service C. tradeunion organization D. foreman E. gets
334. Where MIP and special clothes have to be stored and be neutralized: A. in special household rooms in a work place* B. in shop, in a special locker C. in wardrobe and places of smoking D. in the room for smoking, washing E. in rooms for dust removal at shops
335. Methods of diagnostics of exhaustion: A. objective and subjective* B. qualitative and quantitative C. tool and not tool D. the statistical E. clinical, production
336. Kinds of ventilation on the activator: A. mechanical, natural* B. the general, local C. the stitched exhaust D. air chipping E. the exchange is general
337. Systems of ventilation in a scene of action: A. the general, local* B. mechanical, natural, combined C. stitched, exhaust, through D. air veils, air souls E. aeration, onboard suctions, casing
338. What main objective of the doctor on occupational health at a hygienic assessment of production ventilation: A. efficiency assessment* B. determination of productivity C. determination of frequency rate of air exchange D. assessment of efficiency of treatment facilities E. assessment of correctness of placements of air ducts
339. Efficiency of ventilation is: A. providing with ventilation gigabyte. parameters of the air environment* B. the volume of the air given or deleted from the room C. tightness of air ducts in shop and their arrangement speed D. speed of the movement of air in an air duct E. a physical condition of the given and deleted air
340. It is possible to apply recirculation of air in shop where the leading factor is chemical, presented by substances 2 and 3 of classes of danger: A. it is impossible* B. it is possible C. only during the cold period of year D. it is possible, no more than 50% of time E. only at the beginning of change
341. With whom the collective agreement will be agreed: A. administration of the enterprise* B. heads doctor of CSSES C. heads doctor of medical and sanitary part D. safety engineer E. workers
342. Problems of exhaustion include: A. clarification of the reasons which caused exhaustion, its diagnostics and development of measures of prevention* B. studying of pathogenesis of exhaustion C. development of measures for correction of exhaustion D. training working to the advanced working methods E. promotion of a healthy lifestyle
343. That is regulated at a rational workrest schedule: A. duration of work, breaks, their quantity and contents* B. working conditions, weight and intensity of works C. duration of work and venue of rest D. time for meal and micro breaks E. duration of working hours at the rotational organization of work
344. That treats household rooms: A. wardrobe, shower, washrooms, bathrooms, special household rooms* B. health center, dining room, room of psychological unloading C. restroom and meal D. health center, dignity. knot E. dining room, room of hygiene of women, inhalator
345. Point to correctness sequence of stages of work on a hygienic assessment of a chemical factor in air of a working zone: A. sampling, delivery and analysis, ventilation assessment* B. drawing up sketch of the room, analysis and assessment of results C. studying of technological process, the analysis of tests during change D. studying of technological process, drawing up sketch, selection and analysis of tests E. drawing up the sketch, sampling at ventilation inclusion
346. What questions are taken up at introduction and repeated instructing: A. harmful factors, symptoms of poisonings, measures of first aid, preventive actions* B. acquisition of knowledge of ecology C. preparation public dignity. instructors D. expansion of an outlook, acquisition of hygienic skills E. explanation of value of periodic medical surveys
347. Purpose of carrying out course hygienic training of workers: A. giving working the corresponding knowledge of the prevention of an adverse effect of production factors* B. explanation of value of periodic medical surveys C. acquaintance with system of medical service D. preparation public dignity. inspectors E. acquaintance with administration of the enterprise
348. What main indicators are characterized intensity of work: A. the supervision concentration duration, number of objects of simultaneous supervision, density of the arriving signals, an emotional pressure* B. degree of expressiveness of tension of acoustical and visual analyzers, emotional loadings C. frequency rate of the arriving signals, hard work of an eye, time D. specific weight of tension central nervous and the second alarm systems E. duration of working hours, time spent for the main work
349. The SPZ’s size depends from: A. character and quantity of the allocated harmful, branch, its power* B. wind roses, existence of reservoirs C. relief, gardening D. aero climatic features of the district E. existence of superficial reservoirs and treatment facilities
350. Definition of the term "constant workplace": A. a working zone where working there are more than 50% of working hours or 2 h it is continuous* B. a permanent residence of the working not less than 1 h in change C. a working zone where the working is more than 30% of working hours D. a working zone where the working is more than 80% of working hours or not less than 4 h E. a place where are working during all change
351. The device for definition of time of reflex reaction to thermal influence: A. chronoreflexometer* B. electrothermoanemometer C. differential radiometer D. actinometer E. heat meter
352. The most radical measures of fight against the heating microclimate: A. automation, mechanization, shielding, aeration* B. workrest schedule C. drinking mode D. use of MIP E. rational ventilation, preliminary and precautionary medical surveys
353. The sanitary protection zone (SPZ) is a distance: A. from a place of emission of pollution by the enterprise in environment to premises (quarters)* B. from a fencing of the enterprise to school and preschool institutions C. from a fencing of the enterprise to a water intake place D. between various next enterprises E. from office buildings to production shops
354. On what the structure of household rooms depends: A. features of technological process and harmful factors* B. numbers working and number of changes C. adverse meteoconditions D. intensity of radiative and thermal effects E. intensity of influence of dust, vibration and EMPR
355. The quantity of individual lockers for storage of clothes in the wardrobe depends: A. from number working in the most numerous change* B. from number working in 2 most numerous changes C. from total number working in all changes D. from number working in a day shift E. from features of technological process and harmful
356. At action of local vibration, what rooms have to be provided at construction: A. hydroprocedures and itself massage* B. psychological unloading C. fotary D. prof. of food E. neutralizations of MIP
357. The device for measurement of temperature of skin: A. medical electrothermometer* B. spirit thermometer C. mercury thermometer D. bioheat meter E. radiometer
358. What of the given works on occupational hygiene treat the organizational and methodical: A. drawing up plans (reports), preparation of references, carrying out meetings, seminars* B. preparation of materials for imposing of penalties, check of implementation of resolutions C. carrying out dignity. a gleam. works, complex dignity. inspections D. carrying out check of medical surveys by order of No. 300 E. carrying out investigation of cases of the prof. of diseases and development of improving actions
359. Terms of control of allexchange ventilation: A. 1 time in 3 years* B. once a year C. 2 times a year D. quarterly E. at planned inspection
360. The minimum time for carrying out health education: A. 4 h* B. 10 h C. 6 h D. 1 day a quarter E. 3 times a quarter
361. Main objective of physiological researches it: A. assessment of weight and intensity of work, prevention of exhaustion* B. establishment of nature of influence of production factors C. definition of the main directions of improving actions D. rationalization of system of lighting E. development of the plan of carrying out medical surveys
362. What equipment is necessary for determination of productivity of ventilation: A. TsAGI micromanometer, pneumometric tubes, anemometer* B. reometer, barometer C. electric aspirator, reometer D. aspirator of "Aer", barometer E. vacuum cleaner, anemometer
363. Ventilation belongs to what measures of prevention: A. the sanitary technical* B. the technical and technological C. the medical preventive D. the medical biological E. the organizational and methodical
364. When emergency lighting is provided: A. if at a deviation of a working light there is a danger of explosions, fires, poisonings, violations of processing equipment* B. if only natural lighting is provided C. for evacuation of people from the room D. at insufficient illumination of a working light E. for protection of object at night
365. That such working surface: A. the surface on which work is performed, is normalized or measured illumination* B. the surface located at the height of 1,8 m from a floor C. surface of the equipment or machine D. the horizontal surface located at the height of 1 m from a floor E. surface of all workplaces
366. Definition of concept of coefficient of stability of clear vision: A. the relation of time of clear vision to all time of experience expressed in %* B. time of clear vision in seconds C. time of not clear vision in seconds D. ability of an eye to steady vision of a subject E. time of adaptation to illumination level
367. That such capacity of the visual analyzer, unit: A. the maximum speed with which the visual analyzer transfers information for a unit of time, bit/sec.* B. speed of visual and motor reaction, sec. C. ability of an eye to distinguish subjects, sec. D. adaptation to various levels of illumination E. minimum period necessary for work distinction, sec.
368. What of the listed shortcomings are characteristic for glow lamps: A. low efficiency, difference of a range from natural light* B. at operation often there is a pulsation C. the light stream depends on surrounding temperature D. at change of composition of air luminous intensity changes E. it is impossible to use as heat source
369. Point to advantages of gasdischarge lamps: A. the spectral structure is close to natural light, big light return, is economic* B. ambient temperature has no impact on work of lamps C. operation in any conditions without lighting equipment is possible D. any change of a light stream without lighting equipment is possible E. undervoltage in a network has no impact on luminous intensity
370. In what units the combined lighting is normalized: A. %* B. luxury C. lumen D. candela E. bit/sec
371. In what units artificial lighting is normalized: A. *Luxury B. % C. lumen D. candela E. bit/sec
372. In what units natural lighting is normalized: A. %* B. luxury C. lumen D. candela E. bit/sec.
373. That such brightness: A. the spatial density of the light stream reflected from a surface on the direction to an eye, cd/m2* B. power of the radiant energy causing in an eye light, lx C. area density of a light stream, cd D. the relation of the reflected light stream from a surface to falling on it, reflection coefficient E. spatial danger of a light stream, cd
374. That such CNI: A. the relation of illumination of a working surface to lighting outside of the building in %* B. relation of the area of a floor and area of windows C. relation of the area of windows to the area of windows D. the relation of illumination of a working surface to illumination in passes E. the illumination in luxury created by a natural light source on working surfaces
375. What value of CNI is normalized at unilateral side natural lighting: A. maximum on a working surface* B. minimum on a working surface C. an average on a working surface D. value of CNI in the middle of the room E. value of CNI in passes
376. What value of CNI is normalized at unilateral side natural lighting: A. minimum on distance of 1 m from walls* B. an average in points on a working surface at distance of 1 m from a surface of walls and partitions C. maximum at distance of 2 m from walls D. an average in the middle of the room E. value of CNI in the most remote point of the room
377. What background of lightness is considered when rationing illumination from a working light: A. light, average, dark* B. big, small C. average, light, small D. small, dark, light E. light, big, small
378. The background is considered light at reflection coefficient: A. more than 40%* B. to 60% C. to 100% D. less than 20% E. more than 30%
379. Contrast of object of distinction with a background in norms differs: A. big, average, small* B. light, big, small C. small, light, big D. bright, dark, light E. big, average, bright
380. Contrast of object of distinction with a background is considered big at: A. value more than 50%* B. value more than 20% C. value less than 20% D. value of equal 40% E. value of equal 50%
381. Contrast of object of distinction with a background is considered an average at: A. value from 20 to 50%* B. value to 20% C. value to 10% D. value to 15% E. value of equal 15%
382. Contrast of object of distinction with a background is considered small at: A. value less than 20%* B. value more than 20% C. value from 40% to 50% D. value to 50% E. value to 40%
383. Than the choice of light sources and type of lamps is defined: A. kind of work, conditions of the environment and level of rated illumination* B. special requirements and coloring of the room and equipment C. profitability of a light source D. technological process E. special requirements to determination of color, in reflection coefficient
384. In what situation the doctor issues the decree on closing of production object: A. emergence of the chronic prof. of a disease, failure of a seal* B. lack of MIP C. low ventilation productivity D. at the complaints working E. at complaints of the population
385. Whether microclimate parameters are correctly estimated, comparing them on norms of the warm period of year if temperature of external air is equal *60C and why: A. it is wrong, the norm of the warm period is higher *100C* B. correctly, the warm period is considered with *50C C. correctly, but only for a temperate climate D. correctly, but only for climate of northern areas E. it is wrong as it corresponds to the cold period of year
386. Whether microclimate parameters at their measurement are correctly estimated at the cold period of year, if temperature of external air *140C and why: A. it is wrong, the cold period is considered at a temperature *100C and below* B. correctly, the cold period is considered at a temperature *150C and below C. it is correct if the climate is considered moderate D. it is correct if the climate is roast E. it is wrong as it corresponds to the warm period of year
387. What most radical measures of fight against adverse meteoconditions: A. automation, shielding, aeration* B. workrest schedule, mechanization C. drinking mode, MIP, instructing D. use of MIP, ventilation E. rational ventilation, medical examinations
388. On how many and what groups share a physical activity: A. the 3general, regional and local* B. 3manual, dynamic, static C. 2mekhanizarovanny, nonmechanized D. 5taking into account monotony degree E. 5taking into account the ergo metric of features
389. What method is used in practice for a quantitative assessment of a dust content of air: A. Weight* B. spectra photometric C. sedimentation D. chromatographic E. the chemical
390. Who bears responsibility on production for correctness of operation of lighting system: A. chief power engineer* B. chief engineer C. safety engineer D. process engineer E. the doctor on occupational health
391. At sanitary inspection work is referred to high precision, connected with consideration of color shades. What light source and systems of lighting are most rational: A. luminescent lamps, the combined system* B. glow lamps, the localized system C. natural lighting, unilateral D. glow lamps, general system E. emergency and evacuation lighting
392. Point to correctness of sequence of stages of technological process on a cotton breeding: A. introduction of herbicides and mineral fertilizers, plowed land, sowing, care of plants, preparation for cleaning, harvesting* B. sowing, care of plants, preparation and harvesting C. preparation of the soil, sowing, watering of plants, preparation and harvesting D. preparation of seeds, introduction of pesticides, sowing, harvesting E. plowed land, sowing, thinning, harvesting
393. What complex of factors can make impact on an organism of machine operators at a plowed land: A. noise, vibration, dust, subnormal air temperature, exhaust gases* B. pesticides, mineral fertilizers, the compelled position of a body C. infrared radiation, noise, high temperature of air D. the compelled position of a body, the heating microclimate, noise E. vibration, exhaust gases, dust
394. What of the listed works in a cotton breeding can be carried out with application of manual skills: A. thinning, watering, stamping* B. plowed land, crops of seeds, defoliation C. introduction of mineral fertilizers, pesticides, prograss of seeds D. preparation of fields for the mechanized harvesting E. preparation of seeds, introduction of organic fertilizers
395. What hygienic feature of use of pesticides in a cotton breeding: A. application of a large number and the range of pesticides, is consecutive on big squares* B. use of pesticides of one appointment on small squares at special indications C. obligatory use of pesticides at all stages in various the preparation forms D. absence of sequence in application, existence of various forms and ways of introduction E. use of granules and capsules
396. What of the listed actions are the most effective on decrease in a dust content of air of a working zone of machine operators: A. sealing of cabins, ventilation* B. airing of cabins C. respirator D. decrease in air temperature E. increase in speed of the movement of air
397. In what working pose manual stamping of a cotton is carried out: A. standing with a trunk inclination* B. squating C. in halfbent situation D. standing and sitting E. in the bent
398. At what way of processing of a cotton pesticides more considerably pollute environment: A. aviation* B. rantsevy C. the tractor D. on horse draft E. to manual processing
399. Stages of technological process at ginning plant, where the leading factor dust: A. purification of cotton of a raw of impurity, office of fibers and down of seeds* B. division of cotton fiber from cotton down and its cleaning C. sorting of cotton fiber and its pressing D. neutralization of cotton seeds and their cleaning E. division of cotton fiber according to grades, pressing
400. Point to priority improving actions in producing departments of ginning plant: A. fight against dust* B. fight against vibration C. fight against a chemical factor D. decrease in danger of traumatism E. providing an optimum microclimate
401. What of the listed actions are the most effective for fight against dust in cleaning shops of ginning plant: A. sealing, local exhaust and general forced ventilation* B. increase of productivity of ventilation C. providing the working SIZ D. device of special household rooms E. observance of regulations of technological process
402. What action of production factors on an organism of the working is observed in drying shop of ginning plant: A. dust, excess heat* B. variable microclimate, low illumination C. vibration, the increased humidity D. physical tension E. EMF, chemicals
403. What priority improving actions need to be held in drying shops the hlopkoochistitelnykh of plants: A. fight against an excess thermal emission and dust* B. prevention of intoxication pesticides C. fight against electromagnetic fields D. fight against noise and vibration E. fight against traumatism
404. What reason of development of pustulous diseases of skin in the plants working the ginning: A. microtraumatism, their untimely processing, dust content* B. effect of pesticides and mineral fertilizers as a part of dust C. work without protection of integuments D. discrepancy of household rooms E. absence inhalators, health centers
405. What main measures for environment protection have to be provided in the construction project the ginning of plants: A. sufficiency of SPZ, a complex of cleaning constructions on purification of ventilating air* B. constructions on purification of air of gases C. cleaning constructions for chemical water purification D. actions for reduction of the content of dust in air of production rooms E. special rooms for dust removal of special clothes
406. What devices are necessary for determination of dispersion of dust: A. a microscope, an eyepiece, a ruler in an eyepiece in micrometers* B. analytical scales C. photoelectrocalorimeter D. gas chromatograph E. sedimentary camera
407. That it is best of all to use as the filtering material: A. AFA filter* B. a tampon from a gauze C. hygroscopic cotton wool D. absorbent carbon E. silica gel
408. In what couples of substance the filter for research of dispersion of dust is clarified: A. acetone* B. phenol C. sulphurous anhydride D. nitric acids E. ethyl alcohol
409. That such normal conditions: A. air temperature 20oC, atmospheric pressure is 760 mm hg* B. warm period of year C. cold period of year D. air temperature *10oC above E. air temperature *15oC at relative humidity of 75%
410. How many tests of dust it is necessary to select in each point: A. not less than 5* B. there is enough 1 C. 3 tests D. 2 tests E. 4 tests
411. The main control method of the EMF level is: A. tool measurements of the EMF levels* B. subjective feeling of influence of EMF C. clinical and laboratory data D. calculation method of the EMP levels E. data of periodic medical surveys
412. What devices measure intensity of electric field of high frequency: A. measuring instrument of a near field (NFM1)* B. vibrotester (VT2) C. noise measuring instrument D. ISHV1 E. SHVK1
413. Specify the most rational sequence of actions for fight against harmful effects of EMF: A. organizational, MLL at ISS stage, technical, medicopreventive* B. workrest schedule, use of MIP C. control of the EMF level, passing of PME D. block shielding, hygienic training of the personnel E. passing of PME in full accordance with the order No. 200, use of MIP
414. That such lasers: A. the quantum generators of radiation working in the optical range* B. the devices working in the range of long radio waves C. the generators working in the range of currents of industrial frequency D. the generators working in the range of ionizing radiation E. the devices working in the range of average waves
415. As production objects in relation to inhabited massifs have to settle down taking into account a wind rose: A. alee* B. from a windward side C. at distance of 500 m D. at distance of 1000 m E. at distance of 100 m
416. What types of water consumption can be on production object: A. economic and drinking, technological* B. for the technical purposes and an irrigation C. for dining rooms and household rooms D. for fire extinguishing, fight against dust E. for washing linen
417. What purpose of carrying out periodic medical surveys: A. prevention of the prof. of diseases, their timely identification, decrease in the general incidence* B. data acquisition about incidence working at each factory C. improvement of delivery of health care at the enterprises D. decrease in weight and intensity of work E. studying of working conditions
418. What purpose of preliminary medical examinations; A. not the admission to work with harmful working conditions of the persons having contraindications* B. traumatism prevention C. labor productivity increase D. improvement of medical care of the working E. for firstaid treatment
419. Specify stages of works on use of pesticides; A. preparatory, the main, final* B. drawing up passport of pesticides C. instructing of the working D. storage E. the main, final
420. On what productions lead can be the leading harmful production factor; A. receiving pure metal and printing house* B. use of watersoluble paints C. at assembly of bearings and vacuum devices D. during the gaswelding works and etching of metal E. mechanical engineering
421. What indicators characterize a state of health; A. demographic, physical development, disability, incidence* B. reproduction of the population, mortality, sex, age C. clinical picture, weight of an illness and its outcome D. life conditions, organization of work, environment E. social conditions
422. Than the choice of the category of visual work is defined; A. extent of object of distinction, contrast, lightness of a background* B. features of technological process, profession C. danger of traumatism, intensity of work D. system of lighting, duration of visual work E. weight and intensity of work
423. What of the listed improving actions are most radical for elimination of a chemical factor: A. improvement of technological process, sealing* B. device of rational ventilation C. carrying out medical examinations by order of 200 D. organization of inhalotories, fotories E. sanitary educational work
424. As the doctor needs to arrive a floor to occupational health, at failure to pay a penalty: A. to make the offer on deduction of an unpaid penalty in accounts department of the enterprise* B. to inform of it administration of the enterprise C. to receive an explanation and to give new term D. to discharge of work before payment of a penalty and representation an explanation E. the letter in is khokimiat
425. In what situation the doctor issues the decree on closing of production object A. at emergence of the chronic prof. of a disease, failure of a seal* B. lack of MIP C. with a low productivity of ventilation D. at the complaints working E. at incidence studying
426. For what purposes ventilation on production is used: A. for reduction of a physical state and a chemical composition of air according to hygienic and technical requirements* B. for reduction of an adverse effect of physical factors on workplaces C. for decrease in degree of intensity of works D. for optimization of a working pose and decrease in weight of work E. for labor productivity studying
427. On what categories work on intensity shares: A. not intense, moderately intense, intense, very intense* B. mechanized, in a complex mechanized, manual C. automated, monotonous, regional, the general D. heavy, intense, the general, long E. heavy, average weight
428. That is regulated at a rational workrest schedule: A. duration of work, breaks, their quantity* B. working conditions, weight and intensity of works C. duration of work and venue of rest D. time for meal and microreroars E. increase in a salary
429. The minimum of the periods for carrying out physiological researches and when: A. 3before work, in time and after work* B. 2 the first and last weeks of month C. 2 before work and at the end of change D. 1 in the middle of change E. before work, after work
430. Main objective of physiological researches it: A. assessment of weight and intensity of work, prevention of exhaustion* B. establishment of nature of influence of production factors C. determination of efficiency of the main improving actions D. rationalization of system of lighting and mechanical ventilation E. general and local mechanical exhaust ventilation
431. What of the transferred systems of ventilation it is most effective for fight against excess heat: A. aeration, allexchange ventilation* B. air choking, local exhaust ventilation C. airing, general forced ventilation D. general and local mechanical exhaust ventilation E. air panels
432. What devices are used for measurement of indicators of a microclimate on production: A. actinometer, psychrometer, anemometer, thermometer* B. aspirator, barometer, thermometer C. chronoreflexometer, medical electrothermometer, hygrometer D. radiometer, bioheat meter, Mishchuk's device, actinometer E. chronoreflexometer, surfactant, thremometer
433. On what productions on working perhaps influence of the heating microclimate: A. forge and press, metallurgical, thermal* B. spinning, weaver's, sewing C. when performing subsidiary works in construction, molding D. when performing highrise works, works in caissons E. in mechanical engineering
434. In what bodies and systems it is noted more considerable shifts at mental work: A. CNS* B. to respiratory system C. blood D. system of thermal control, watersalt exchange E. gastrointestinal tract, endocrine
435. Where MIP and special clothes have to be stored and be neutralized: A. in special household rooms in a work place* B. in shop, in a speciallocker C. in wardrobe and places of smoking D. to the room for smoking, washing E. in wardrobe, fotariya
436. As settles dust under the law of Newton? A. size 100 mkm and more* B. size 90 mkm and more C. size 80 mkm and more D. size 70 mkm and more E. size 60 mkm and more
437. As settles dust the size under Stokes's law? A. from 0,1100 mkm* B. from 0,290 mkm C. from 0,380 mkm D. from 0,470 mkm E. from 0,560 mkm
438. As settles dust on Brownian motion? A. less 0,1 mkm* B. less 0,2 mkm C. less 0,3 mkm D. less 0,4 mkm E. less 0,5 mkm
439. What content of silicon makes on our planet? A. 27,6% of mass of crust* B. 37% of mass of crust C. 35% of mass of crust D. 30% of mass of crust E. 20% of mass of crust
440. Through how many years develops silicosis at dust influence? A. of 310 years* B. of 28 years C. in 35 years D. till 46 years E. in 14 years
441. Through how many years develops silicatosis at dust influence? A. in 1520 years* B. after 1318 years C. till 1216 years D. of 1014 years E. of 812 years
442. When there is a pneumoconiosis from mixed dust? A. at 1820 18 years length of service* B. in 1618 years length of service C. of 1517 years length of service D. till 1416 years length of service E. of 1215 years length of service
443. From what dust develops diseases of eyes – conjunctivitis, keratitis, a cataract A. from trinitrotoluene dust* B. from trinitrotoluene talc C. from trinitrotoluene lime D. from trinitrotoluene chrome E. from trinitrotoluene plastic
444. Since what years the biological factor became is happy with widespread production harm? A. since 1940* B. since 1950 C. since 1955 D. since 1960 E. since 1965
445. The biological factor as the leader, is constantly noted generally in two types of productions it …. : A. the microbiological industry, use of biological pesticides in agriculture* B. metallurgy, mechanical engineering C. refrigerating production, construction D. chemical industry, chemical laboratory E. the mining coal
446. That such optimum indicators? A. optimum indicators a microclimate provide such condition of an organism at which a certain ratio between heat production of an organism and a thermolysis creates feelings of thermal wellbeing during all shift, i.e. thermal comfort* B. this thermal radiation in an organism this subjective expression of reaction from a surface of a body is transferred to less heated air layers inflowing to it regulation of heat generation in an organism C. it is heat exchange by convection D. this comfortable condition of an organism E. this radiation of heat by radiation
447. That such admissible indicators? A. admissible indicators of a microclimate provide possibility tension of thermal control of the person who isn't going beyond physiological changes* B. this representing invisible electromagnetic radiation C. direct return is warm from a surface of a human body D. return of heat happens in the direction of surfaces to lower temperature E. return of heat happens by evaporation of moisture from a surface of a body of the person
448. Call essence of the law of Prevo – Kirchhoff: A. emission is caused only by a condition of the radiating body and doesn't depend on environment* B. the thermal radiation representing invisible electromagnetic radiation C. biological opportunities of the person in preservation of a temperature homeostasis D. promotes increase in a thermolysis by sweating E. increases a thermolysis by convection
449. Call essence of the law StephaneBoltzmann: A. with temperature increase of the radiating body, the power of radiation increases in proportion to the fourth degree of its absolute temperature* B. it observes at contact of a surface of the body working C. return of heat happens by moisture evaporation D. transfers of heat from deep the mangling fabrics to skin E. heat of production of an organism of the working
450. That such law Vienna? A. work of absolute temperature of the radiating body on radiation wavelength with the maximum energy is a constant* B. heat from a surface of heat is transferred to less heated air layers inflowing to them C. heat from a surface of a body is given when sweating D. heat from a surface of heat evaporates in the direction of a surface with lower temperature E. heat from a surface of a body is given at breath
451. As it is measured microclimate parameters? A. at height 1m from a floor or a working platform during the works performed sitting, and 1,5 m – during the works standing on height* B. at height 2 m from a floor C. at distance 2,5 m from a working platform D. 3 m standing on height 1,5 m during the works sitting E. 1,8 m during the works standing on distance
452. Call indicators at a water source choice: A. depth of a superficial water source, type of a source and output, qualities of water* B. direction of a reservoir C. an amount of water applied for technological and hozyaystvenno drinking needs D. SPZ volume E. микрокоимат rooms
453. That such absolute humidity? A. the amount of water vapor in grams, contains in 1 cubic meter of air at the time of research* B. this quantity which is warmly available to an air molecule C. the movements of air of temperature connected in a difference between air layers D. to the nevidiyena electromagnetic radiation E. this quantity humidity available as a part of air
454. That such maximum humidity? A. 1 weight of water vapor which can sate 1 cubic air meter at this temperature* B. providing an organism by creation of an optimum microclimate C. a mutually combination of the processes of heat generation and heat of return regulated nervously – an endocrine way D. ability of an organism to give heat to environment by radiation E. creation of favorable health of workers by individual protection
455. Call relative humidity of air: A. the relations of absolute humidity to maximum, expressed in %* B. ability of an organism to increase warmly production depending on microclimatic conditions C. speed a vizheniye of air of temperature connected in a difference between air layers D. amount of water vapor in grams E. in total water vapor which can sate 1 cubic air meter
456. As settles dust under the law of Newton? A. size 100 mkm and more* B. size 90 mkm and more C. size 80 mkm and more D. size 70 mkm and more E. size 60 mkm and more
457. As settles dust the size under Stokes's law? A. from 0,1100 mkm* B. from 0,290 mkm C. from 0,380 mkm D. from 0,470 mkm E. from 0,560 mkm
458. As settles dust on Brownian motion? A. less 0,1 mkm* B. less 0,2 mkm C. less 0,3 mkm D. less 0,4 mkm E. less 0,5 mkm
459. That such adaptation of the acoustic analyzer: A. decrease in acoustical sensitivity no more than on 15 dB which is restored within 3 min after the termination of impact of noise* B. decrease of acoustical sensitivity more than on 15 dB which isn't restored within 3 min C. a feather adaptation of the acoustic analyzer as a result of intensive noise D. loss of acoustical sensitivity on averages and high frequencies E. decrease in acoustical sensitivity under the influence of intensity of noise is sharp
460. That such exhaustion of hearing: A. decrease in acoustical sensitivity as a result of noise more than on 15 dB which isn't restored in 3 min. after the termination of impact of noise* B. decrease of acoustical sensitivity under the influence of sound irritations which is restored in 3 min. after the end of influence C. feather adaptation of the acoustic analyzer D. adaptation of the acoustic analyzer E. decrease in hearing, on the speech range of frequencies
461. In what dependence there is a gain of intensity of a sound and acoustical perception: A. logarithmic* B. the arithmetic C. the geometrical D. simple summation E. the return
462. In shop where 12 various machines work, the general noise level in the first change is measured. Estimate correctness of measurements: A. it is wrong; the total characteristic on each workplace is necessary* B. incorrectly; necessary noise level to a half of workplaces C. incorrectly; it is necessary to define it and in the second change in the same place D. all researches are conducted correctly E. it is necessary to measure microclimate parameters at the same time
463. In weaver's shop where from 50 installed machines worked 20 measurements of noise level are taken. Estimate correctness of carrying out measurement: A. it is wrong, at measurement not less than 2/3 equipments have to work* B. correctly, as more than 10% of the equipment work C. correctly, as nearly a half of the equipment works D. incorrectly, as at the same time it is necessary to measure also the general vibration E. it is necessary to measure microclimate parameter
464. Taking into account what features of work noise is normalized and to what MLL is compared: A. degree of intensity and weight of work, optimum* B. lasting changes; the optimum C. at very hard work; the admissible D. at very intense work; the admissible E. during the work in a night shift; the admissible
465. What leading factor will be in weaver's shop and that treats contributing factors A. noise, vibration, the increased humidity* B. vibration, the lowered air temperature C. noise, the compelled working pose D. considerable walking, tension of organs of vision E. weight and intensity of work
466. At workers of mechanical shop decrease in acoustical and vibration sensitivity is revealed. What devices thus were used: A. vibrotestor* B. audionoise meter, actinometer C. tuning fork, vibrocount D. anemometer, sound analyzer E. NV1, the thermometer
467. That such relative deafness? A. permanent decrease in thresholds of acoustical sensitivity* B. sharp decrease in acoustical sensitivity at high frequencies C. loss of acoustical sensitivity at low frequencies D. total loss of air conductivity E. decrease in acoustical sensitivity not 15 dB restored after rest
468. That such deafness? A. total loss of acoustical sensitivity on all frequencies* B. permanent decrease in thresholds of acoustical sensitivity C. decrease in acoustical sensitivity by 20 dB D. loss of acoustical sensitivity at speech frequencies E. sharp decrease in acoustical sensitivity as a result of strong noise
469. What sequence of change in an organism of the intensive noise working at influence: A. adaptation, exhaustion, relative deafness, deafness* B. exhaustion, relative deafness, change in CNS C. change in CNS and CVS D. exhaustion, relative deafness, decrease in the general working capacity E. decrease in acoustical sensitivity, sleep disorder
470. By what ways it will be warmly given, if air temperature *36 oC, humidity of 55%, temperature of walls *30 oC: A. potoispareniye, thermal radiation* B. with the exhaled air C. convection, conduction D. convection, radiation E. radiation, carrying out
471. What main ways of return of heat an organism in environment at high temperature of air: A. evaporation of moisture from a surface of skin and lungs* B. conduction, potoispareniye C. radiation, carrying out D. conduction, radiation E. conduction, convection. radiation
472. In what way there is a thermolysis at low air temperature: A. radiation, convection* B. evaporation, radiation C. a conduction, with the exhaled air D. conduction, potoispareniye E. evaporation of moisture and from a poverkhost of skin and lungs
473. What main ways of return of heat an organism at high relative humidity and normal temperature: A. carrying out, convection* B. with the exhaled air C. conduction D. radiation E. potoispareniye
474. How to change heat production at a temperature of *15 *20oC: A. doesn't change* B. increases C. decreases D. change the insignificant E. can or will increase or will decrease
475. As heat production of an organism changes at a temperature from *10 to *15 oC: A. raises* B. goes down sharply C. goes down slightly D. changes wavy E. doesn't change
476. As heat production of an organism at air temperature in sidealtars from *30 changes to *35 oC: A. goes down* B. raises C. doesn't change D. will change slightly E. can or raise or go down
477. What changes of heat production of an organism at a temperature of *40 …. *45 oC: A. raises* B. goes down slightly C. it is lowered considerably D. wavy changes E. doesn't change
478. That influences strengthening of a thermolysis of an organism by radiation: A. temperature of surrounding surfaces* B. temperature and humidity of air C. humidity and speed of the movement of air D. thermal insulation of surrounding subjects E. temperature and speed of the movement of air
479. In what dependence to be the wavelength of infrared radiation and its temperature: A. in inversely proportional* B. in the directly proportional C. doesn't depend from each other D. not always depends E. depending on paint of walls, a ceiling and a floor
480. As radiation power with temperature increase of the radiating body changes: A. increases in proportion to 4 degrees of its absolute temperature* B. decreases in proportion to 4 degrees of its absolute temperature C. increases in direct ratio to temperature of the radiating body D. decreases in proportion to temperature of the radiated body E. increases by 50% of a gain to temperature
481. Whether lucheispuskayushchy ability of a body depends on air temperature: A. isn't present* B. yes C. sometimes D. partially E. depends on coloring of surrounding surfaces
482. As the spectral structure of the radiation (wavelength) with temperature increase of a source changes: A. towards short waves* B. towards long waves C. doesn't change D. changes wavy E. part towards short, part towards the long
483. What changes happen in an organism at influence of the heating climate: A. temperature increase of skin, body, sweating, tachycardia, increase systolic and decrease diastolic arterial pressure* B. body temperature doesn't change, the arterial pressure doesn't change, amplifies sweating C. sweating amplifies, body temperature decreases, skin, the arterial pressure falls, bradycardia D. decrease in temperature of skin and temperature increase of a body, tachycardia, decrease systolic and increase in diastolic pressure E. temperature of skin increases, bodies doesn't change, increase of breath and pulse, the arterial pressure doesn't change
484. What changes happen in an organism at cold influence: A. narrowing of peripheral vessels, bradycardia, increase arterial pressure, warmth strengthening* B. narrowing of superficial and deep vessels, tachycardia, decrease arterial pressure, decrease in a metabolism C. the tone of vessels doesn't change, tachycardia, breath increase, D. raises diastolic and systolic pressure decreases E. viscosity of blood, bloodgroove speed, adrenaline secretion decreases,
485. That cooling of an organism is one of the first signs: A. decrease in temperature of skin* B. violation of reflex activity C. pulse urezheniye D. increase arterial pressure E. urezheniye breath
486. What diseases can arise at cold influence: A. radiculitis, rheumatism, bronchitis, arthritis, frostbite* B. proximal tachycardia, keratit, a miolgiya C. neurasthenia, stomach ulcer, arthrosis D. cataract, hypertension, eczema, convulsive illness E. astenovegetative syndrome, gastritis lucheispuskayushchy ability of a body
487. The diagnosis of sharp lead professional poisoning is made by the emergency doctor, without clarification of circumstances of poisoning, the notice is sent to CSSES in a day. Whether the doctor correctly arrived? A. the doctor arrived correctly, but the notice had to be sent to CSSES no later than within 12 hours* B. the doctor had no right to make the diagnosis to the prof. of poisoning C. for statement of the diagnosis consultation of prof. pathologist is necessary D. the notice is sent to CSSES in due time E. the notice has to be sent in 24 hours
488. In what terms investigation of cases sharp professional poisoning is made? A. within 24 hours* B. within 48 hours C. within 3 days D. within 12 hours E. on obtaining the notice on the prof. a disease;
489. For final establishment of the diagnosis of the prof. of poisoning what it is necessary to consider? A. hygienic characteristic of working conditions* B. results of preliminary medical survey C. results of periodic medical survey D. carrying out introduction and repeated instructing E. existence of MIP and overalls
490. The worker of thermal shop addressed in a medical health center with complaints to fatigue, thirst, spasms in feet, feeling of a heat. What preliminary diagnosis can be assumed? A. Hyperthermia* B. hypothermia C. hypodynamic frustration D. exhaustion E. sars
491. What type of local forced ventilation is most effective? A. air dushirovaniye* B. onboard suctions C. exhaust umbrella D. hood E. casing
492. At periodic medical examination at a number of rubilshchik of the wood are revealed the phenomenon of an angiospasm of the lower extremities, акроцианоз, decrease in temperature of skin of feet and brushes. How it is possible to characterize this state? A. Overcooling* B. hypodynamia C. exhaustion D. hyperthermia E. asthenic syndrome
493. What disease can arise at holodovy influence? A. Bronchitis* B. keratit C. neurasthenia D. cataract E. gastritis
494. At the enterprise the leading harmful factor is mineral dust. What effect of dust will be the leader? A. fibrogenny* B. the sensibilizing C. the toxic D. the irritating E. the local
495. Than danger of influence of aerosols of fibrogenny action is defined? A. content of crystal dioxide of silicon* B. big solubility in water C. small solubility in water D. elektrozaryazhennost E. weak fagotsitoz
496. What of the listed bodies it is most of all sensitive to fibrogenny dust? A. lungs* B. liver C. organs of vision D. organs of hearing E. digestive tract
497. In laboratory there was a spill of metal mercury, a timber floor, walls are whitewashed by lime. What it is necessary to undertake? A. to collect mercury, to fill in the remains with chloric iron, to carry out a room demerkurialization* B. to clear under sexual space, to provide the working MIP C. to include exhaust and to switch off forced ventilation D. to collect mercury, and all personnel to direct on medical examination E. to report administrations and on a health center
498. What requirements are imposed to rooms if in it apply metal mercury? A. 1 floors, tsyokalny covering of a floor* B. top floor, local exhaust mechanical ventilation C. work only during the cold period of year D. work only at natural lighting E. device of aeration, air veils
499. In what cases it is possible to allow use of metal mercury? A. technological need, full compliance of working rooms and equipment* B. economic feasibility, 1 floor C. implementation of the order No. 200, providing MIP D. highquality briefing, preliminary medical survey E. at the shortened working hours
500. On a workplace of the clincher production noise exceeds MLL on 5 dBA? As the doctor of CSSES has to arrive: A. to draw up the statement with the indication of measures for decrease in noise level and to specify terms* B. to make the protocol C. to close the enterprise before elimination of shortcomings D. to instruct E. to oblige administration to replace processing equipment
501. Taking into account what features of work noise is normalized? A. to a stpenye of intensity and weight of work* B. lasting changes C. at very hard work D. at very intense work E. during the work in a night shift
502. The level of production noise is compared to what MLL? A. with optimum* B. with the admissible C. with the minimum sizes D. with the maximum sizes E. doesn't matter
503. Addressed to heads the doctor of CSSES complaints to a dust content from the population living about cement works arrived. What it is necessary to find out first of all at investigation? A. sufficiency of SPZ to measure concentration of dust in an accommodation zone* B. an ozelenennost, SPZ to find out concentration of dust in the territory of plant; C. existence water of sources and cleaning constructions D. negotiability of the population to medical institutions E. wind rose and enterprise capacity
504. Point to the correct sequence of action of the doctor on occupational health, when closing object (site): A. delivery of the resolution CSSES of administration, imposing of the press, drawing up act* B. drawing up act of closing C. the translation working for other work D. disconnection from the power supply network of processing equipment E. imposing of the press on processing equipment with the notification of administration
505. What factors have continuous effect on a workplace of machine operators? A. noise, vibration, meteofactor, exhaust gases* B. century noise, insektofungitsid, meteofactor C. page meteofactor, mineral, fertilizers, noise D. electromagnetic field, air movement speed, gases E. biological factor, emotional pressure
506. In CSSES of the Hamza area was carried out expertize of the project of production lighting. What of calculation methods is most often applied at examination of projects of production lighting to determination of illumination? A. dot method* B. lyuksmetriya method C. efficiency method D. on comparison scales E. Watt method
559. That such adaptation of the acoustic analyzer A. decrease in acoustical sensitivity no more than on 15 dB which is restored within 3 min after the termination of impact of noise* B. decrease of acoustical sensitivity more than on 15 dB which isn't restored within 3 min C. a feather adaptation of the acoustic analyzer as a result of intensive noise D. loss of acoustical sensitivity on averages and high frequencies E. decrease in acoustical sensitivity under the influence of intensity of noise is sharp
560. That such exhaustion of hearing: A. decrease in acoustical sensitivity as a result of noise more than on 15 dB which isn't restored in 3 min. after the termination of impact of noise* B. decrease of acoustical sensitivity under the influence of sound irritations which is restored in 3 min. after the end of influence C. feather adaptation of the acoustic analyzer D. adaptation of the acoustic analyzer E. decrease in hearing, on the speech range of frequencies
561. In what dependence there is a gain of intensity of a sound and acoustical perception: A. logarithmic* B. the arithmetic C. the geometrical D. simple summation E. the return
562. In shop where 12 various machines work, the general noise level in the first change is measured. Estimate correctness of measurements: A. it is wrong; the total characteristic on each workplace is necessary* B. incorrectly; necessary noise level to a half of workplaces C. incorrectly; it is necessary to define it and in the second change in the same place D. all researches are conducted correctly E. it is necessary to measure microclimate parameters at the same time
563. In weaver's shop where from 50 installed machines worked 20 measurements of noise level are taken. Estimate correctness of carrying out measurement: A. it is wrong, at measurement not less than 2/3 equipments have to work* B. correctly, as more than 10% of the equipment work C. correctly, as nearly a half of the equipment works D. incorrectly, as at the same time it is necessary to measure also the general vibration E. it is necessary to measure microclimate parameter
564. Taking into account what features of work noise is normalized and to what MLL is compared: A. degree of intensity and weight of work, optimum* B. lasting changes; the optimum C. at very hard work; the admissible D. at very intense work; the admissible E. during the work in a night shift; the admissible
565. What leading factor will be in weaver's shop and that treats contributing factors A. noise, vibration, the increased humidity* B. vibration, the lowered air temperature C. noise, the compelled working pose D. considerable walking, tension of organs of vision E. weight and intensity of work
566. At workers of mechanical shop decrease in acoustical and vibration sensitivity is revealed. What devices thus were used: A. vibrotestor* B. audionoise meter, actinometer C. tuning fork, vibrocount D. anemometer, sound analyzer E. NV – 1, the thermometer
515. Since when's biological factor has become a fairly common industrial harmfulness? A. from 1940* B. from 1950 C. from 1955 D. from 1960 E. from 1965
516. Biological factors as the leading, constantly observed mainly in two types of production is ... ..: A. microbiological industry, the use of biological pesticides in agriculture* B. metallurgy, engineering C. refrigerators manufacturing, construction D. chemical industry, chemical laboratory E. mining coal
517. What is considered acceptable? A. acceptable microclimate indicators include the possibility of tension thermoregulation person without departing the physiological changes* B. is a representing the invisible electeragnetic radiation C. direct heat loss the surface of the human body D. return heat occurs in the surface direction at a lower temperature E. return heat is by evaporation of moisture the surface of the human body
520. Name the essence of the law Prevost-Kirchhoff: A. radiation is caused only by the state of the radiating body and does not depend on the environment* B. thermal radiation, which is the invisible electeragnetic radiation C. biological human capabilities in maintaining temperature homeostasis D. contributes increase the heat by sweating E. heat trans by convectionenlarges
521. Name the essence of the law Stefan-Boltzmann: A. increase in temperature of the radiating body, the radiation power increases in proportion to the fourth power of its absolute temperature* B. is observed in contact surface of the body working C. return heat is by evaporation of moisture D. trans heat the depths placed of the skin tissue E. heat production body works
522. What is the law of Vienna? A. the product of the absolute temperature of the emitting body to the wavelength of the radiation with a maximum energy is constant* B. heat surface heat flow is transmitted less heated layers of air to them C. heat the surface of the body is given when sweating D. heat heat evaporates the surface towards the surface at a lower temperature E. heat the surface of the body is given by breathing
523. How to measure the parameters of the microclimate? A. on the height of 1m the floor or the working platform when the work is done sitting down, and at a height of 1,5 m at work standing* B. the height of 2 m floor C. on 2,5 m distance the work area D. the height of 3m 1,5 m standing at work sitting E. on a distance of 1,8 m in standing work
524. What is the absolute humidity? A. amount in grams of water vapor contained in one cubic meter of air at the time of the study* B. amount of heat available air molecules C. motions air related to the temperature difence between the air layers D. invisible electeragnetic radiation E. amount of moisture present in the air composition
525. What are the relative humidity of the air: A. relationship absolute humidity to the maximum, expressed in%* B. ability body's heat production to increase, depending on the microclimatic conditions C. fast moving air related to the temperature difence between the air layers D. number of water vapor in grams E. all of water vapor that can satisfy one of cubic meter of air
526. As the dust settles on Newton's law? A. the size of 100 mkm and more* B. the size of 90 mkm and more C. the size of 80 mkm and more D. the size of 70 mkm and more E. the size of 60 mkm and more
527. As the dust settles on the esp of Stokes' law? A. 0,1-100 mkm* B. 0,2-90 mkm C. 0,3-80 mkm D. 0,4-70 mkm E. 0,5-60 mkm
528. As the dust settles on the Brownian motion? A. less than 0,1 mkm* B. less 0,2 mkm C. less 0,3 mkm D. less 0,4 mkm E. less 0,5 mkm
529. What is the silicon content on the planet? A. 27,6% of the mass of the crust* B. 37% by weight of the earth's crust C. 35% by weight of the earth's crust D. 30% by weight of the earth's crust E. 20% by weight of the earth's crust
567. How many years of developing silicosis when exposed to dust? A. 3-10 years* B. 2-8 years C. 3-5 years D. up to 4-6 years E. 1-4 years
568. How many years of developing asbestosis when exposed to dust? A. 15-20 years* B. after 13-18 C. up to 12-16 years D. 10-14 years E. 8-12 years
569. On what productions on working perhaps influence of the heating microclimate: A. forge and press, metallurgical, thermal* B. spinning, weaver's, sewing C. when performing subsidiary works in construction, molding D. when performing highrise works, works in caissons E. in mechanical engineering
570. In what bodies and systems it is noted more considerable shifts at mental work: A. CNS* B. to respiratory system C. blood D. system of thermal control, watersalt exchange E. gastrointestinal tract, endocrine
571. Where MIP and special clothes have to be stored and be neutralized: A. in special household rooms in a work place* B. in shop, in a speciallocker C. in wardrobe and places of smoking D. to the room for smoking, washing E. in wardrobe, fotariya
572. The exhaustion is: A. the time decrease in working capacity caused by performance work* B. infringement of an industrial dynamic stereotype C. functional changes in bodies and organism systems D. occurrence of stagnant braking in the brain centers E. subjective sensation
573. Endurance indicator: A. time during which work set effort can be carried out* B. weight of cargo which the worker for an interval of time can lift C. ability of an organism to resist to stressful situations D. operating time in adverse conditions E. the work experience in adverse conditions
574. Dust loading on respiratory organs of the working is defined as: A. total quantity of particles of the dust arriving in respiratory organs for a certain interval of time (change, month, year, the experience)* B. total weight of the dust arriving in respiratory organs during the seniority C. the maximum concentration of a dust in air of a working zone D. maximum concentration limit excess in 10 times E. the minimum concentration of a dust in air of a working zone
575. Industrial noise with prevailing frequency more than 1000 Hz belongs to the class: A. Highfrequency* B. the lowfrequency C. the midfrequency D. the mechanical E. the voicefrequency
576. At noise level change for a labour shift no more, than on 5 decibel, it is called: A. the broadband B. constant* C. fluctuating in time D. the voicefrequency E. the mechanical
577. At noise level change for a labour shift more, than on 5 decibel, it is called: A. not constant* B. the broadband C. to constants D. the voicefrequency E. the mechanical
578. Levels of sound pressure in octava strips of frequencies and in decibel are normalised on workplaces for noise: A. constant* B. the faltering C. the pulse D. the changeable E. the mechanical
579. The industrial ultrasound represents mechanical fluctuations of the elastic environment in a range of frequencies: A. 16 Hz and less* B. 16 к Hz and more C. 31,5 8000 Hz D. there is no exact border E. there is no right answer
580. Professional defeats of eyes arise at influence electric magnetic field of a range: A. SHF* B. UHF C. high frequencies D. low frequencies E. there is no right answer
581. At work with electromagnetic sources of microwave radiation following defeats of eyes can develop: A. cataracta* B. nystagmus C. false shortsightedness D. farsightedness E. conjunctivitis
582. The factor cumulation (КК) is defined as: A. relation LD50 at repeated introduction – to LD50 at unitary* B. relation lethal dose, LD 100 to LD50 C. relation LD84 to LD16 D. relation Limас to Limch E. relation LD50 ch – to LD100
583. The zone of chronic action (Zch) is defined as: A. relation Limас to Limch* B. relation LD50 to Limас C. relation Limас to LD50 D. relation Limch to Limас E. relation Limch to LK50
584. It is necessarywhether left with carcinogen manufactures annually to pass medical inspection: A. yes* B. no C. at will D. only workers of pension age E. only women of genital age
585. At receipt possibility in air of a working zone of harmful substances with keenly directional the mechanism of action sampling should be carried out: A. not less often than 1 time a month (1 and 2 classes)* B. not less often than 1 time a quarter C. constantly with application of systems of automatic control D. at will of administration of the enterprises E. there is no right answer
586. As the zone of sharp action is defined: A. relation LD50 to Limас* B. relation Limас to LD50 C. relation Limас to ЛК50 D. relation КК to Limch E. relation Limас to Limch
587. Primary medical institution at the enterprise is: A. medical sanitary part* B. factory sanatoriumdispensary C. laboratory D. corner a san.gleam. works E. the advisory medical centre
588. Who bears legal responsibility for registration for work without passage and reception of the conclusion of preliminary medical survey: A. employer* B. the head physician of a medical medical unit of the enterprise C. the doctor on factory hygiene D. the doctor of the medical commission E. the shop therapist
589. Investigation of a case of a chronic occupational disease (poisoning) by the doctor on factory hygiene from the moment of reception of the notice on an establishment of the final diagnosis should be spent during: A. 7 days* B. 1 days C. 10 days D. taking into account free time of the doctor on factory hygiene E. at will of enterprise administration
590. Specify structural divisions of a medical sanitary part of industrial objects: A. shop health centres and factory polyclinic* B. hospital and drugstore C. hospital and dispensary D. sanatoriumdispensary and optics E. corner of sanitaryeducational work and medical assistant's point
591. The sharp occupational disease (poisoning) arises after: A. unitary (during one labour shift) influences harmful factor* B. repeated (during one labour shift) influences of harmful factors C. repeated and long (more than one labour shift) influences of harmful factors D. at nonobservance of safety precautions regulations E. there is no right answer
592. More the aeration complete definition sounds as: A. unorganized natural ventilation through windows and transom* B. the organised natural ventilation with application deflector C. operated mechanical ventilation with prevalence of inflow D. the natural, organised, operated ventilation E. airing (draught)
593. What minimum distance from eyes to the monitor screen: A. 40 sm* B. 20 sm C. 60 sm D. 80 sm E. has no value
594. What device can have harmful influence on health of the person: A. monitor* B. the system block C. the printer D. the modem E. mouse
595. As it is necessary to look at the monitor: A. from abovedown* B. at the leftto the right C. from belowupwards D. on the righton the left E. without a difference
596. In what direction from the monitor harmful radiations are maximum: A. from the screen back* B. from the screen downwards C. from the screen forward D. from the screen upwards E. there is no right answer
597. As often it is necessary to do breaks in work at a hard work behind the computer: A. everyone 3 hours* B. not to do at all C. each hour D. each 5 hours E. at occurrence of unpleasant sensations in eyes
598. Specify the minimum duration of breaks at work behind the computer: A. 510 minute* B. 2025 minutes C. 3540 minutes D. there is no right answer E. to carry out a physical activity
599. That it is necessary to do in breaks at work behind the computer: A. gymnastics for eye* B. to esteem the book C. to look at television D. gymnastics for feet E. to carry out a physical activity
600. What vitamins are necessary for using with food during a hard work behind the computer: A. A, В6, F B. A, B12, C* C. A, B12, D D. A, B, C, D E. C, D
601. What of methods of struggle against noise is the most radical: A. decrease in a source education* B. decrease by the way of distribution C. decrease by application antiphonary D. regular control over noise level E. periodic and preliminary medical surveys
602. Basic legislative documents concern: A. the constitution, the code of laws on work, legislation* B. sanitary code and rules C. instructions, reports and orders D. methodical letters, decisions, recommendations E. GOST (State standards of system of safety of work), Construction norms and rules (CNandR), instructions
603. Standard legislative documents concern: A. SanRaN (Sanitary rules and norms), Construction norms and rules (CNandR)* B. safety rules, to health protection C. methodical letters, recommendations, orders D. rules on personal hygiene, the order E. recommendations about a healthy way of life, the decision
604. Instructivemethodological documents concern: A. methodical instructions, recommendations, instruction* B. orders, orders, letters C. GOST, decisions, the order D. Sanitary rules, instructions, a quality monitoring E. Construction norms and rules (CNandR), forms of the account of sanctions
605. The doctor on factory hygiene should use what legislative document, if different normalised sizes of harmful factors are resulted: A. Sanitary rules and regulations* B. occupational safety standards systems C. Construction norms and rules (CNandR) D. ergonomic norms E. recommendations about the scientific organisation of work (NOTES)
606. What from adopted legislative documents concern the basic: A. the code of laws on work, constitution* B. Sanitary code, instructions C. Building norms and rules, orders D. State standard, methodical letters E. methodical instructions, sanitary rules
607. 608. As states of doctors of the CSSES on factory hygiene are estimated: A. 1 doctor on 10 thousand working* B. 1 doctor on 14 thousand working C. depending on category CSSES D. 1 doctor on 60 thousand working E. depending on quantity of the enterprises
609. As states of assistants to doctors on factory hygiene in CSSES are estimated: A. 1 assistant on 6 thousand working* B. 2 assistants on one doctor C. taking into account category CSSES D. 1 assistant on 30 thousand population E. depending on quantity of the enterprises
610. What document regulates registrationaccounting documentation CGSES: A. order Ministry of health of the Republic of Uzbekistan number 287* B. the instruction of static management C. order Ministry of health of the Republic of Uzbekistan number 200 D. decisions of khakimiyat E. decisions of city health
611. Basic and standard legislative documents on hygiene and a labour safety have character: A. state character* B. departmental character C. recommendatory character D. administrative character E. medical character
612. Who is responsible for working conditions and a labour safety working: A. administration industrial object* B. the engineer under safety precautions C. doctor CSSES on factory hygiene D. the head physician of a medical sanitary part E. head physician CSSES
613. Who carries out the higher supervision of execution of laws on work according to the constitution: A. Ministry of health, regional department public health* B. the general public prosecutor and bodies of office of public prosecutor C. the Ministry of social welfare D. CSSES, the Ministry of labour E. trade unions, enterprise administration
614. Sanitary inspections are subdivided into what kinds on under control objects: A. planned, deepened, verifying and thematic observation* B. control, not planned and collective inspections C. single, general and periodic inspections D. stagebystage, precautionary and target inspections E. reusable and disposable inspections
615. As it is frequent doctors on factory hygiene profound sanitary inspections are carried out: A. 1 time in 4 year* B. quarterly C. 2 times a year D. as required E. on the instructions of higher bodies
616. What data is necessary for the doctor on factory hygiene for "plantask" drawing up: A. results profound sanitary observation* B. technological card of production C. the general layout, separate shops and sites D. results of verifying sanitary inspections E. materials of preliminary medical inspections
617. Who plans points of gaugings of production factors on the sketch: A. doctor CSES on hygiene work* B. the engineer under safety precautions C. managing sanitaryandhygienic laboratory D. the foreman E. managing sanitary department
618. The primary goals of factory hygiene: A. hygienic estimation of modernisation of the industry and in rural economy* B. liquidation of occupational diseases, professional poisonings C. struggle against noise, vibration and ultraviolet radiation (UFA) D. creation of optimum working conditions, disease decrease, labour productivity increase E. hygienic estimation of new substances of a chemical and biological origin
619. The basic methods of factory hygiene: A. sanitaryandhygienic, physiological, experimental* B. mathematical, chemical, polling methods C. technological, physical, clinical methods D. supervision method, toxicological, statistical methods E. immunological, radio isotope methods, questioning
620. On what groups industrialsanitary factors share: A. physical, chemical, biological, psychophysiological methods* B. technological, variable, constant C. individual, collective, natural factors D. social, household, chemical methods E. pulse, faltering, constant methods
621. As legislative documents in the field of hygiene and a labour safety are subdivided: A. basic, fundamental, standard, instructivemethodological documents* B. the recommended, instructive, confirmed documents C. decisions, orders, orders D. departmental, general purpose, branch documents E. personal, office, legal documents
622. Name the legislative document defining the rights and duties of health officers CSSES: A. law of the Republic of Uzbekistan «About the State sanitary inspection»* B. order Ministry of health of the Republic of Uzbekistan number 200 C. position about Statsaninspection number 361 D. order Ministry of health of the Republic of Uzbekistan number 1075 E. instructions about imposing of sanctions
623. Indemnification for harmful working conditions is carried out by a way: A. reductions of the working day, additional leave* B. sanitary education, surcharges to the salary C. recommendations of increase of working capacity D. individual defence means (BGM), drawing up of recommendations about a labour safety E. medical inspections, the decision of tradeunion bodies
624. The plan of work of branch of factory hygiene CSSES consists of what basic sections: A. sanitaryeducational work, current sanitary inspection* B. scientificallypractical, organizationalmethodical work, precautionary sanitary inspection (PSN) C. ISP, laboratorytool work D. scientificallymethodical work, scientific researches E. organizationalmethodical work
625. What kinds of works concern organizationalmethodical work: A. drawing up of plans (reports), preparation of inquiries, carrying out of meetings, workshop* B. preparation of materials for imposing of penalties, check of performance of decisions C. conduct Sanitaryeducational work, complex sanitary inspection D. carrying out of check of medical surveys by order of order Ministry of health of the Republic of Uzbekistan number 200 E. carrying out of investigation of cases of occupational diseases and working out of improving actions
626. The certificate of profound sanitary inspection consists of what parts: A. the passport part ascertaining, the conclusions, offer* B. passport part, the conclusion, use terms C. the descriptive part ascertaining, offers, reports of measurements D. ascertaining part, the conclusion, legal, the plantask E. descriptive part, graphic, finishing, dates of performance
627. In area total number of 60 thousand working equally. How many doctors on factory hygiene should be on the staff CSSES: A. 6* B. 10 C. 8 D. 4 E. 5
628. What number of assistants to the doctor in CSSES if the quantity working in the given administrative territory is equal 42 thousand persons should be: A. 7* B. 5 C. 10 D. 8 E. 4
629. Specify sequence of actions at imposing of sanctions: A. the disease analysis, economic damage* B. the final certificate, the plantask, the decision C. the sanitary description, results of laboratory analyses, the conclusion D. orders on CSSES and on under control object E. the inspection certificate, the report on sanitary infringement, the decision
630. That should undertake first of all doctor CSSES on factory hygiene at investigations of complaints of the population on a dust content from cottonfactory: A. to find out size SPZ and presence clearing building* B. presence of others harmfulness in a sanitaryprotective zone (SPZ) C. gardening SPZ D. presence of sources of water supply at the enterprise E. to survey ventilation at factory
631. What measure of influence should be applied, if at the enterprise the offered improving measures on decrease in disease with time disability (TD) do not take root: A. stay* B. preparation of materials in office of public prosecutor C. quality check of carrying out of preliminary medical survey D. drawing up of the report on sanitary infringement E. quality check of carrying out of periodic medical survey
632. In what of the specified situations materials are represented to office of public prosecutor: A. failure of a seal and renewal of work closed object* B. at default of sanitary instructions C. at nonpayment in time the penalty D. at complaints working on insufficient light exposure E. under the order statement
633. How to measure the parameters of the microclimate? A. on the height of 1m the floor or the working platform when the work is done sitting down, and at a height of 1,5 m at work standing* B. the height of 2 m floor C. on 2,5 m distance the work area D. the height of 3 m 1,5 m standing at work sitting E. on a distance of 1,8 m in standing work
634.What is the absolute humidity? A. amount in grams of water vapor contained in one cubic meter of air at the time of the study* B. amount of heat available air molecules C. motions air related to the temperature difence between the air layers D. invisible electeragnetic radiation E. amount of moisture present in the air composition
635.What is the maximum humidity? A. 1 by weight of water vapor which may saturate one of cubic meter of air at a given temperature* B. providing the body by creating an optimum microclimate C. cocompatibility processes of heat and warmth return regulated neuroendocrine by D. ability the body release heat to the environment by radiation E. create a favorable state of health of workers using personal protective equipment
636.When there is a mixed dust pneumoconiosis? A. at 18-20 years of work experience* B. after 16-18 years of work experience C. 15-17 years of work experience D. up to 14-16 years of work experience E. 12-15 years of work experience
637.A dust developing eye diseases conjunctivitis, keratitis, cataract: A. dust of trinitrotoluene* B. talc of trinitrotoluene C. lime of trinitrotoluene D. cherium of trinitrotoluene E. plastic of trinitrotoluene
638.What is the umipr respiratory tract? A. hypertrophic inflammatory and then atrophic processes in the mucosa of the nose, pharynx, larynx and trachea, which reduces their protective function* B. inflammation kidney diseases C. inflammation muscular system D. ear infection E. inflammation cardio vascular system
639.A dust develops carbokaniosis? A. carbon dust* B. metal dust C. synthetic dust D. associated silica dust E. animal dust
640.When developing dust bronchitis? A. at 8-10 years of work experience of workers 'dusty' professions* B. with the experience of 7-9 years C. a 6-8 years after operation D. 5-7 years E. 4-6 years
641.What impact electrocharged dust: A. affects the sharpness of subsidence in the air and the depth of penetration into the respiratory system* B. on the endocrine system C. on the digestive tract D. on the central nervous system E. on cardiovascular system
642.A dust arises byssinosis: A. dust cotton* B. metal C. asbestos D. cement E. talc
643.Name of the distance to the restrooms worksheet, housed in the building: A. is not more than 75 m* B. not more than 70 m C. more than 65 m D. more than 60 m E. not more than 55 m
644.Specify the temperature of the air in the sanitary household premises: A. *160 *250C B. *140 *160C C. *120 *140C D. *100 *120C E. *130 *150 C
645.How is the amount of foot baths on the basis of the calculation? A. 50 men and 40 women* B. 40 men and 30 women C. 30 men and 20 women D. 35 men and 25 women E. 25 men and 15 women
646.What ventilation necessary sanitaryhousehold premises? A. natural ventilation* B. artificial ventilation C. general exchanging ventilation D. place ventilation E. local ventilation
647.What is the document? A. documents called business documents with legal significance* B. donating grounds and reasons of the document C. the subject matter relation D. containing paper E. service paper
648. What kind of personal documentsаre exists: A. application and curriculum vitae* B. rule C. protocol D. documents E. workplan
649. Specify the dates when and how many times is drawn indepth health examination: A. is not later than the end of the 3rd quarter, one every four years* B. not later than first quarter C. not later 4th quarter D. 1 once a year E. at the end of the 2nd quarter
650. On the basis of what data on occupational health physician can make documents for administrative sanctions? A. protocol laboratory tests, the result of san survey, the results of the investigation of occupational disease* B. revealing reasons C. representation documents chief physician Center of the state sanitary epidemiological surveillance (CSSES) D. order for investigation occupational disease E. summarizing act
651. Give the definition of "Occupational safety": A. is a system of laws and their corresponding social services. economic, technical, hygienic and organizational measures to ensure the preservation of health and human performance at work* B. system legislation C. economic and technical measures D. hygienic events E. organizational events
652. Call types of hygienic standards of hazards: A. limit admissible concentration limit values* B. departments of f the state sanitary epidemiological surveillance C. nature saving institutions D. ministry of labor E. projective organization
653. Occupational hygiene the science: A. studied the effect of the body working conditions, work organization and work process* B. the defining health status of workers C. conducting impact on dangerous working environment factors D. learning labor protection work E. forming measures to improve the work capacity
654. The main tasks of occupational health: A. creating optimum working conditions, reduce morbidity, increased productivity* B. terminating occupational diseases and occupational poisoning C. the fight with noise, vibration, infultravoice ound D. hygienic assessment of technical reequipment industry E. hygienic assessment of new substances chemical and biological origin
655. What are the main methods of occupational health: A. sanitaryhygienic, physiological, experimental* B. mathematical, chemical, questionnaire C. technological, physical, clinical D. observing, toxicology, laboratory E. immunological, RF, questioning
656. What groups are divided into production and health factors: A. physical, chemical, biological, physiological* B. technological, variables, constants C. individual and collective, natural D. social, household, chemical E. a pulsed, intermittent, continuous
657. How divided legislative documents in the field of occupational health and safety: A. basic, regulatory, methodical instructive* B. recommended and guidance C. law and orders D. departmental, general purpose E. personal service
658. The fundamental legal documents include: A. the Constitution of, orders, labor code* B. Sanitary standards and rules C. instructions protocols D. and methodical letter ruling E. GOST, Construction norms and rules (CNandR)
659. Normative legal documents include: A. Sanitary norms and rules, State standards, Construction norms and rules (CNandR)* B. orders C. letters and methodical recommendations D. sanitary rules, the rules for personal hygiene E. recommendations of healthy lifestyle
660. To instructivemethodical documents include: A. guidelines, recommendations, instructions* B. order order C. GOST, standards, regulations D. sanitary norms and rules, the rules specify methods E. Construction norms and rules (CNandR), forms of accounting control sanctions
661. Name the legal document defining the rights and obligations of health officers: A. law of Uzbekistan "On state sanitary supervision" 2015 year* B. order Ministry of health of the Republic of Uzbekistan number 200 C. position of “Governmental sanitary observation” number 362 D. order Ministry of health of the Republic of Uzbekistan number 1075 E. instructions to impose sanctions
662. What document are determined by the states department of occupational Center of the state sanitary epidemiological surveillance (CSSES): A. order Ministry of health of the Republic of Uzbekistan order number 1075* B. user work CSSES C. order Ministry of health of the Republic of Uzbekistan number 200 D. user about the occupational health department CSSES E. GOST 12.1.005 88
663. What kind of legislative document on occupational health physician should use if given the difent normalized values of harmful factors: A. sanitary rules and regulations* B. GOST System safety standards C. Construction norms and rules (CNandR) D. ergonomic rules E. recommendations of scientific organization of work (SOW)
664. Which of these legal documents are fundamental: A. Code of labor, laws, orders* B. sanitary rules, rules, regulations C. building regulations D. GOST System safety standards, methodical letters E. methodical guidance, health rules
665. How are estimated medical staff department of occupational center of the state sanitary epidemiological surveillance (CSSES) hygienists: A. one doctor per 10,000 employees* B. 1 doctor on 14 thousand employees C. to depending on the category CSSES D. 1 doctor for 60 thousand working population E. to depending on the number of enterprises
666. In the area of the total number of employees is 60 thousand. How many physicians in occupational health should be in the state of CSSES: A. 6* B. 10 C. 8 D. 4 E. 5
667. Is the number of staff units numbered physician assistant in the CSSES, if the number of employees in a given administrative area is 42 thousand people: A. 7* B. 5 C. 10 D. 8 E. 4
668. How are estimated staff of assistants doctors on health in CSSES: A. assistant in 6000 working* B. 2 per physician assistant C. to depending on the number of enterprises D. taking into account the category CSSES E. assistant 30 thousand population
669. What kind of documents is regulated registrationreporting documentation CSSES: A. order Ministry of health of the Republic of Uzbekistan order number 287* B. order Ministry of health of the Republic of Uzbekistan order number 200 C. user stat. management D. governmental edict E. order Ministry of health of the Republic of Uzbekistan order number 231
670. Compensation for harmful working conditions are carried out by: A. reduction of working hours, additional leave, luticpensioning* B. paint education surcharges to the salary C. recommendations of increasing work capacity D. means of individual protection (MIP), make recommendations on labor protection E. medical examinations, making trade union bodies
671. Basic and regulatory legislation on health and safety are of the nature: A. state* B. recommendative C. medical D. departmental E. informative
672. Who is responsible for the safety and working conditions of workers: A. administration of industrial building* B. engineer safety C. CSSESdoctor in occupational health D. a principal doctor of medical sanitary unit E. CSSES is a principal doctor
673. Who performs under the constitution high supervise observance of labor laws: A. attorney general and prosecutor's offices* B. the Ministry of health, regional health care C. the Ministry of social welfare, State committee nature D. CSSES, hydrometeorological service E. labor union, business administration
674. When investigating complaints of adverse working conditions of work, the commission ministry blame it on the doctor in occupational health CSSES. Is it correct? A. does not* B. yes C. it depends on the deviation the norm D. it depends on the type of violations E. it dependent on complaints
675. What are the objects of the precautionary sanitary inspection (PSI) on occupational health: A. construction of production facilities the new techniques and technologies, chemicals* B. reconstruction education facilities, lighting equipment C. extension of the medical facility building ventilation D. construction of facilities for wastewater treatment E. construction recreation centers
676. How preobservation stages of construction: A. four* B. three C. five D. two E. one
677. The first phase of construction of the precautionary sanitary inspection (PSI) are: A. select a plot for building* B. petition customer C. petition contractor for construction of the facility D. conclusion architect E. resolution on financing
678. The second phase is the construction of the precautionary sanitary inspection (PSI): A. overseeing the design, examination of projects* B. observation during construction C. investigation data on water and sanitation D. assessment location on a residential area in the zone E. participation in the work of the commission
679. The third phase is the construction of the precautionary sanitary inspection (PSI) supervision: A. during construction* B. when choosing a land plot C. when considering treatment facilities D. with examination of the master plan E. when designing installations for the protection of atmospheric air
680. The fourth stage is the construction of the precautionary sanitary inspection (PSI): A. reception into operation built objects* B. investigate construction projects C. investigate measures for air protection D. expertise contingency plan and water supply E. investigate technical conditions for wastewater treatment
681. What are the tasks solved by the doctor in occupational health in the selection of land for construction: A. possibility of placement on the site of production* B. sufficiency of the sizes of a platform C. the number of employees and scientific organization of work D. sufficiency of funding E. conclusion hydrometeorological service
682. What are the main problem solved by the doctor in occupational health at oversee construction: A. determine whether the construction progress of the project, the implementation schedule, monitoring of working conditions of builders* B. assessment correct placement of plants on the territory of C. determination compliance progress of construction of the approved plan D. hygienic assessment of the degree of mechanization E. builtdefine matching domestic premises project
683. What part of the detailed design for the construction of the doctor considers occupational health: A. master plan, lighting, ventilation, household premises* B. situational plan C. and accounting documents D. level design E. requirement to the improvement of the site
684. What is the main task of the doctor in occupational health in the work of the commission during commissioning: A. evaluation of the effectiveness of health interventions and adequate lighting* B. drawing up opinions on the conformity of the constructed object project C. checking the availability of measures to combat harmful factors D. checking the conformity of technological equipment projects E. checking the conformity of the equipment household premises hygiene requirements
685. What kind of problems can be solved at the state acceptance commission: A. finally, the possibility of acceptance of object in operation* B. improvement of territory of the enterprise C. state sanitary protective zone D. the presence of sanitarytechnical systems E. protection external environment
686. Is it possible to build a residential area in the company and which: A. can be, but only enterprise class 4 and 5, do not emit pollutant* B. yes, if they are not a source of noise C. no, under any circumstances D. yes, if allocated only factor E. yes, if planted sanitary protective zone
687. What is a document drawn up by a doctor of occupational health, the choice of land and examination of construction projects: A. finally* B. act C. planjob D. decree E. protocol
688. What is a document drawn up by a doctor of occupational health, while overseeing the progress of construction and admission to operation: A. act* B. decree C. protocol D. conclusion E. consistency
689. What are the legal instruments are mainly used during the precautionary sanitary inspection (PSI) for the design and construction of: A. Construction norms and rules (CNandR), Sanitary rules and regulations (SRandR)* B. user C. methodical guidance D. the law on the protection of E. GOST System safety standards
690. What are the legal documents used during the PSI for new equipment, technologies, etc: A. Sanitary rules and regulations, GOST System safety standards* B. decree number 361 C. order Ministry of health of the Republic of Uzbekistan order number 1075 D. user and regulations of higher bodies E. codex labor laws, Construction norms and rules (CNandR)
691. How many steps precautionary sanitary inspection for new equipment, technology: A. three* B. one C. four D. two E. five
692. The first phase of the precautionary sanitary inspection for the new technology, the technology is: A. examination of normative technical documentation, technical specifications* B. availability safety measures C. measurement harmful factors D. checkup drawings of new equipment E. checkup for determining hazards
693. Working committee established inefficient ventilation and lighting is poor. What decision must take CSSES chief doctor at work in the State commission for acceptance into service production facility: A. does not sign the instrument of governmental assumption object* B. signs act when giving a letter of guarantee builders C. agrees, but giving the customer a letter of guarantee D. signs, but indicate the term deficiencies E. agrees with builders
694. Working committee featured the maximum permissible concentration of dust and norms of air temperature at 50C. Should the doctor to sign the act of the working committee, if all the other members have signed it: A. no* B. yes C. yes with provided deficiencies D. write a dissenting opinion E. require retesting
695. What are the hygienic requirements for artificial lighting, projected domestic premises? A. is not less 75 lk* B. not more 50 lk C. not more 40 lk D. not less 70 lk E. not more 30 lk
696. What are the hygienic requirements for natural light? A. at least 0,3%* B. not more than 0,5% C. not less than 0,2% D. not less than 0,1% E. not more than 0,4%
697. When arranged hand and foot baths? A. work related to vibration* B. work in hot shops C. work with noise D. with no daylight E. pollution
698. When the sanitary inspection of the general plan of construction engineering plant revealed no waste and evacuation in the shops. Could this be a reason for the mismatch of the project? A. can* B. can not C. you agree, provided improvements D. it is possible to agree in giving commitments and eliminate defects E. project be returned to the customer
699. If the prestart period found during the construction of deviation the project construction schedule and violations of sanitary technical devices must act as a doctor of occupational health and how often to monitor the object: A. suspend construction, control 1 per month* B. set deadline for the elimination of controls on a quarterly basis C. states fine on the head of construction, control 2 times per quarter D. forms protocol of sanitary abuse E. control 1 semiannually
700. The second phase of the precautionary sanitary inspection for the new technology, the technology is: A. participation in production testing* B. examination of design solutions C. passport data technical upgrade D. approves new equipment E. efficiency mark
701. The third stage of the precautionary sanitary inspection for new technology equipment: A. finally, the possibility of acceptance into service of new techniques and technologies* B. checkup scientific technical documentation C. expertise passport details of new chemicals D. assessment efficiency, SOW E. availability sanitary and technical devices and their effectiveness
702. Precautionary sanitary inspection terms of construction of production facilities: A. one time per quarter* B. once a year C. twice a year D. to prelaunch period E. monthly
703. Precautionary sanitary inspection terms of construction objects in the prelaunch period:
A. monthly* B. one per year C. this two weeks before the working committee D. each square E. twice a year
704. How many classes of shares the value of sanitary protective zone (SPZ): A. five* B. three C. two D. one E. four
705. What companies can build on the borders of residential areas: A. 4 and 5 classes that do not emit pollutant into the environment* B. 1 class C. 2 and 3 classes D. the enterprises and community purpose E. the enterprises for the primary processing of agricultural products
706. What determines the value of sanitary protective zone: A. on the nature and amount of pollutant emissions, industry, power* B. rose winds, the presence of reservoirs C. relief, landscaping D. airclimatic terrain E. the presence of surface water and sewage treatment plants
707. Can member of governmental commission accept into operation of the constructed object to refuse signing the act of acceptance: A. can, if the act of the working committee, but with the motivation of failure* B. maybe without explanation C. don't be, because act signed by other members of the commission D. maybe if the act is not signed by some members of the commission E. not may refuse
708. What are the main sections of the plan is the work of occupational health department CSSES:
A. organisationalmethodical work, precautionary sanitary inspection (PSI), current sanitary inspection (СSI)* B. scientific and practical, health education C. PSI (precautionary sanitary inspection) of construction D. Sanitary and hygiene, laboratory and instrumental work E. methodical work, health education
709. When checking found that the work plan of the department of occupational health CSSES not signed. Who makes and approves: A. head of the department of occupational health, the chief doctor CSSES* B. doctor in occupational health, head by sanitary part C. principle of san. department, deputy chief medical officer D. CSSES is a principal doctor, ministry E. principle department of occupational health, head region health care
710. Which of the work on occupational health relate to the organizational methodical: A. drawing up of plans, meetings, seminars* B. preparation materials for the imposition of fines, checking the execution of orders C. carrying out of sanitary educational work, comprehensive health survey D. carrying out of audit of medical examinations on order Ministry of health of the Republic of Uzbekistan number 200 E. carrying out of investigation of cases of occupational diseases and the development of recreational activities
711. Specify the sequence of steps when imposing sanctions: A. certificate of inspection, sanitary protocol on violation, the decision* B. summary act of compendium job C. paint description, lab results, conclusion D. orders by CSSES E. orders on controlled objects
712. What kind of health survey divided on controlled objects: A. scheduled (depth), thematic* B. conductive, unplanned, collective C. mult, general, periodic D. bystage, crosssectional, on request E. current, warning, target
713. How often is the indepth health examination: A. one time in four years* B. each quarter C. 2 times a year D. as needed E. by instructions of higher bodies
714. What should first take doctor CSSES hygienists when investigating complaints the public in the dust of the cotton plants: A. find out the existence and magnitude of the sanitary protective zone (SPZ) and treatment facilities* B. the presence of other hazards in the SPZ C. greening sanitary protection zone D. the presence of water sources in the enterprise E. investigate ventilation in the factory
715. Is the doctor entered CSSES closed at screening examination thermal plant, if it is determined that the air temperature is 420C, and the dust concentration 52 mg/m3: A. right* B. wrong C. right since there was no air showering D. wrong since this was not preceded by a fine E. preparation materials to the prosecutor
716. What are the sanctions to be applied, the proposed health action to reduce morbidity with temporary disability (TD): A. suspension of the subject* B. preparation materials to the prosecutor C. checking the quality of the preliminary examination D. drawing up a protocol on violation of sanitary E. checking the quality of the periodic medical examination
717. In some situations the physician should provide input to the prosecution: A. failure of the seal and the resumption of a closed object* B. with not complying with sanitary regulations C. with nonpayment of the fine within the period D. with complaints of a lack of working illumination E. with clarifying the reasons occupational disease
718. It was found that the plant at night produces emissions into the atmosphere without cleaning the ventilation air. What should the doctor in occupational health: A. provide input to the prosecution* B. fine plant director C. fine safety engineer D. hesitate operation of the facility E. day period to eliminate marked violations
719. Is the doctor went to the prosecutor giving representation to initiate criminal proceedings if the factory applied new unexplored chemical compounds without the consent of CSSES: A. right* B. wrong C. regular if the substance class 1 D. wrong, as there was an urgent need E. wrong since this was not preceded by a fine
720. What is the impact of the measure should be applied in discharge of untreated sewage pond slaughterhouse: A. provision of materials to the prosecutor* B. development of health measures C. development of environmental protection measures, drawing up the act with the deadline for the elimination of D. drawing up regulations to impose a fine E. drawing up a protocol on violation of sanitary
721. What the components of the act of profound health survey: A. rating, notes, opinions, suggestions* B. conclusion and terms of use C. describing, notes ofings D. constating, detention, legal E. describing, graphics, finishing, deadlines
722. In some cases, the doctor of health conducts quantification of hazards: A. for admission to operation of completed projects, the introduction of new technology, indepth surveys, evaluation of the effectiveness of health measures, consideration of complaints working* B. with health inspection, lighting projects, technological solutions C. with investigating occupational poisoning D. with construction control E. when assessing the severity and intensity of labor
723. What kind of data are needed on occupational health physician for the compilation "compendium jobs": A. the indepth health survey* B. technological card production process C. a general layout of the enterprise, the individual departments and sections D. results health screening examinations E. materials of preliminary medical examinations
724. What documents are issued as a result of indepth survey of health facility: A. certificate of inspection, plantask* B. paint characteristic, offers C. paint characteristic leading trades D. conclusion information E. protocol laboratory studies
725. Who outlines the factors of production in terms of measurements on the sketch: A. doctor CSSES of occupational health* B. engineer safety C. heading sanitaryhygienic laboratory D. foreman E. heading health department
726. Specify the correct sequence of actions of the doctor in occupational health screening at a sanitary inspection of the property: A. notify the administration to verify compliance with the requirements to make the act* B. check the implementation of proposals to find out the cause of his failure C. get acquainted plantask, the order of the factory on the implementation of the audited issue D. find out implementation of proposals the administration, and make the act E. outwit thorough health examination, to evaluate the effectiveness of health measures
727. What should be reflected in the application for laboratory tests in production areas: A. that explore, at what time, where* B. on which to sample analysis methods C. the description of the process and the time of the study D. the presence of ventilation, light level E. is the order of the research, the use of equipment
728. The frequency of check sanitary surveys of production facilities depends on: A. terms of performance requirements, the sanitary condition of objects* B. qualification occupational health physician, the technological process C. the number of working women and adolescents D. availability domestic premises, rooms of hygiene women E. are the numbers of sanitary violations at the facility
729. Specify the correct sequence of important events in the factory canape: A. local exhaust and general ventilation is, providing respirators, medical examinations by order number 200* B. means of individual protection (MIP), medical examinations by order number 200, local, airjet ventilation C. carrying out of medical examinations, provision of personal protective equipment, general ventilation D. mechanical ventilation, utility rooms, medical examinations E. is the natural ventilation, medical checkup
730. Specify the correct sequence of actions of the doctor in occupational health, at the closing of the property: A. award presentation print resolution of the administration, preparation of an act* B. drawing up the act of closing the presentation press for technological equipment C. hesitate process, at the same time working on the translation of other work, overlay printing D. the deviation the supply of technological equipment E. putting printing production equipment and warehouses, notification of administration
731. What should I do if a screening examination installed remote excess noise 10 dBA, and the illumination below the normal 50 lk: A. write a document and report on the sanitary abuse* B. appoint new term performance requirements C. develop health measures to reduce noise D. develop health measures to improve the climate of the light E. compose a letter to the administration
732. What you need to find out first of all in the investigation of complaints about the dust of the population survives near the cement plant: A. sufficiency of the SPZ, to measure the concentration of dust in the area of residence* B. greening SPZ ascertain the concentration of dust in the factory C. the presence of water sources and water treatment facilities D. amipaling population in hospitals E. rose winds and capacity of the company
733. How do you need a doctor of occupational health in the nonpayment of a fine: A. to make a proposal to hold the unpaid fines to the accounting of the enterprise* B. put a notice to the administration of the enterprise C. get an explanation and give a new term D. suspend work to pay a fine and submit explanations CSSES E. rewarn and draw up a report on the sanitary abuse
734. What you need to know the doctor in occupational health for the proper determination of the factors measuring points on the sketch: A. causes leading to the formation factor during exposure sources* B. releasing product, raw materials used, the profession C. organization of work, the efficiency of ventilation, season D. by allocation, availability of comprehensive protection measures E. the raw material, mode of work, health measures
735. CSSES doctor of occupational health at the sanitary inspection domestic premises must determine: A. matches a set of premises, equipment, the state of ventilation and lighting* B. use the premises for other purposes, the use of bathing and delousing establishment C. meet hygiene requirements lighting, ventilation, Sanitary standards and rules D. coordination separate premises, microclimate parameters E. meteocondition, usability,
736. In some situations the doctor makes the decision to close the production facility: A. of chronic occupational poisoning, failure of seals* B. lack of means of individual protection C. low performance ventilation D. with complaints of workers E. with public complaints
737. If the verification of sanitary inspection ginneries found a significant excess of the remote noise and subnormal temperature. What should the doctor CSSES: A. write a document and formalize the decision to suspend the object* B. set the decision to impose a fine C. day indication of the security of MIP D. prescript mismatch safety engineer E. compose act to give a new period of performance requirements
738. Specify the maintenance work of the doctor in occupational health checking the correctness of the report on form 16temporary disability (TD): A. check the correct encryption sick leave, regardless of their journal, and exponential calculation* B. count the total number of cases, days and days of disability C. checking incidence data in the form of 25y D. identification of the causes leading to an increase in the incidence of E. availability occupational intoxication and occupational disease in this production
739. What should be described in the sanitaryhygienic characteristics of work submitted in preventive hospital: A. description of the work performed, quantitative hazards, work organization, efficiency improving measures* B. about changes in the process, the number of workers in hazardous areas C. detailed description of the process, the products D. short description of the process, the effectiveness of health measures E. data on the results of CSSES requirements, quantitative physical factors
740. Specify the contents of methodical work on occupational health physician with the doctors of medical profile before carrying out periodic medical examinations: A. acquainted with the peculiarities of the process, the nature of the influence of factors, the state of general and professional morbidity* B. training techniques periodic medical examination by order number 200 C. o importance of laboratory research in medical examinations D. results of preliminary medical examinations, act indepth survey of health facility E. getting the main directions of health measures in this industry, accounting system disease
741. What are the documents related reporting form 16TD: A. static* B. decree C. medical D. controlling E. information
742. In response to a request by a doctor CSSES working conditions of the patient with suspected occupational disease, working on cotton plants in a cleaning shop, presented data on the parameters of the microclimate and security specialist, clothing. What data is still needed: A. description of the work performed, the concentration of dust, noise* B. parameters seasonal climate and atmospheric pressure C. balance air, waterdrinking regime D. data preliminary and periodic medical examinations E. is the frequency and duration of the patient's temporary disability for conducting 5 years
743. Who compiled the report and data is encrypted in the form of 16TD: A. head of the health center* B. administration enterprise C. engineer safety D. chairman trade union E. doctor in occupational health
744. According to a legal document held periodic and preliminary medical checkup: A. order Ministry of health of the Republic of Uzbekistan number 200.* B. base health legislation C. position of the CSSES D. decree to conduct medical examination of population E. base labor legislation
745. The diagnosis of acute lead occupational intoxication put an emergency room physician, without clarifying the circumstances of poisoning notice in CSSES sent the next day. Assess the situation: A. need to find a profession and place of work, notify the CSSES for 12 hours* B. doctor did the right thing C. doctor had no right to make the diagnosis occupational intoxication D. for diagnosis need advice pathology E. doctor ambulance would take the victim to the hospital occupational poisoning
746. What is the objective of the periodic medical examinations: A. warning occupational diseases, their timely detection, reducing the overall morbidity* B. getting data on the incidence of working at every production C. improved rendering of medical assistance to enterprises D. decrease in severity and intensity of labor E. proilaxy occupational injuries
747. What is the objective of preliminary medical checkup: A. nonadmission to work in hazardous conditions of persons with contraindications* B. injury prevention C. increasing productivity D. improving working medical applications E. identify longterm and frequently ill persons
748. Who should undergo preliminary medical checkup: A. coming to work under harmful and dangerous working conditions* B. all coming to work on this production C. face under 18 D. face over 55 years E. having disability group II
749. Who should undergo periodic medical checkup: A. the same work, which provided preliminary medical checkups* B. experience of more than 3 years C. experience more than 5 years D. containing on dispensary E. duration and often ill
750. What is the frequency medical checkup and what it depends on: A. 1 every 6, 12, 24 months, the degree of danger* B. up to joining, the state of health C. when changing profession, length of service and age D. with release (termination) of the work on the health E. 1 once a quarter, the degree of danger
751. Work on occupational health physician to monitor the conduct of preliminary medical checkup mainly includes: A. personnel department sample of the order on the conclusion of a job, check form number (025/y)* B. carrying out of instrumental studies of harmful factors in the workplace of persons enrolled C. analysis of acts of investigation and occupational disease, occupational intoxication D. immersed study of general morbidity E. development of therapeutic and preventive measures to reduce occupational disease, occupational intoxication
752. Work doctor CSSES occupational health at the organization periodic medical examination (PME) mainly includes: A. conducting methodical seminars, coordination plan periodic medical examination (PME) certain contingent* B. studying of hygienic working conditions C. drawing up of test instruments D. drawing up the final act E. preparation order for department of regional health care
753. It established that the company had made 20 employees that have not been premedical checkup whose work is associated with exposure to heavy metals, such as in this case should do the doctor in occupational health: A. remove the work of these individuals* B. compose plan to carry out these inspections C. inform the clinic D. informirovative administration E. a measurable harmful factors
754. Work on occupational health physician in monitoring the conduct of PME mainly includes: A. drawing up of thematic instruments to monitor the frequency, composition physicians and laboratory tests* B. studying of labor hygienic conditions C. drawing up the final act D. checking contingent subject to the PME E. labor rehabilitation cases
755. The contents of the doctor's work on occupational health at the end of CSI: A. participation in the drafting of the final act, the development of recreational activities* B. evaluation of economic efficiency or damage C. investigation cases occupational disease D. investigation occupational accidents E. development rational regime of work and rest
756. What is regulated by the order number 200: A. type of adverse factors, contraindications, the multiplicity of JI, the composition and analysis of physicians* B. work experience C. age and sex workers D. level of hazardous substances E. occupational belongings
757. In addition to the working conditions and the profession that still affect the level occupational disease i: A. high quality and timely initial and periodic medical checkup* B. mode of work and rest a. exercise and training C. availability departmental transport D. harmful and repeated design on a labor safety
758. Conducted preliminary and periodic medical checkup: A. medical sanitary part (MSP) territorial health facility* B. craft therapists C. med. stationdoctor D. doctor obstetriciangynecologist E. doctor clinical departments
759. Who is responsible for the timely and organized the attendance of working on CSI: A. administration of the enterprise* B. labordoctorhygienist C. shopdoctortherapist D. engineer safety E. head medical prophylactic establishment (MPE)
760. The medical card during periodic medical examination (PME) workers recorded as a therapist, the duration of the examination I once per year. Rate the correctness of periodic medical examination (PME): A. is not all professionals involved and do laboratory tests* B. periodic medical examination (PME) Performed correctly C. when carrying out periodic medical examination (PME) are not considered contraindications D. do not take into account the results of the preliminary medical checkup E. viloated frequency of periodic medical examination (PME)
761. Who is entitled to make the diagnosis of chronic occupational disease: A. professional pathology center, department occupational disease* B. doctor emergency care C. specialistdoctor of the central district hospital D. doctor of medical sanitary part (MSP) E. craft doctor
762. Occupational disease most clearly reveals: A. influence working conditions and the health status of the profession* B. role housing and communal conditions C. influence family living conditions D. role age and sex on the incidence E. influence geographical conditions on health
763. Which of the most common causes of a occupational disease: A. imperfect process, inefficiency sanitary devices* B. no induction of labor protection C. nekachestvenny review of the occupational safety and health D. offgrade periodic medical examination (PME) E. violation work and rest
764. On the basis of what documents addressed the issue of communication occupational disease, profession: A. clinical manifestations, sanitary and hygienic characteristics of working conditions* B. weight of clinical manifestations C. duration days of temporary disability D. ambulatory cards E. data of followup
765. Who occupational diseaseis to establish sanitary and hygienic characteristics of working conditions: A. doctor of occupational health CSSES* B. engineer safety C. head of medical prophylactic establishment (MPE) D. doctor of professional pathology E. craft therapists
766. What is regulated by the order number 200: A. type of adverse factors, contraindications, the multiplicity of ji, the composition and analysis of physicians* B. work experience C. age and sex workers D. level of hazardous substances E. professional belongings
767. In addition to the working conditions and the profession that still affect the level occupational disease: A. high quality and timely initial and periodic medical checkup* B. mode of work and rest C. exercise and training D. availability departmental transport E. harmful and repeated design on a labor safety
768. Conducted preliminary and periodic medical checkup: A. head medical prophylactic establishment (MPE)* B. territorial health facility C. workshop therapists D. medical station doctor E. doctor obstetriciangynecologist F. doctor clinical departments
769. Who is responsible for the timely and organized the attendance of working on periodic medical examination (PME): A. administration of the enterprise* B. labordoctorhygienist C. shopdoctortherapist D. engineer safety E. head medical sanitary part (MSP)
770. The medical card during periodic medical examination (PME) workers recorded as a therapist, the duration of the examination I once per year. Rate the correctness of PME: A. is not all professionals involved and do laboratory tests* B. periodic medical examination (PME) Performed correctly C. when carrying out MIP are not considered contraindications D. do not take into account the results of the preliminary medical checkup E. viloated frequency of periodic medical examination (PME)
771. Who is entitled to make the diagnosis of chronic occupational disease: A. professional pathology center, department occupational disease* B. doctor emergency care C. specialistdoctor of the central district hospital D. doctor of medical prophylactic establishment (MPE) E. craft doctor
772. Occupational disease most clearly reveals: A. influence working conditions and the health status of the profession* B. role housing and communal conditions C. influence family living conditions D. role age and sex on the incidence E. influence geographical conditions on health
773. Which of the most common causes of a occupational disease: A. imperfect process, inefficiency sanitary devices* B. no induction of labor protection C. unquality review of the occupational safety and health D. unquality periodic medical examination (PME) E. violation work and rest
774. On the basis of what documents addressed the issue of communication occupational disease, profession: A. clinical manifestations, sanitary and hygienic characteristics of working conditions* B. heaviness clinical manifestations C. duration days of temporary disability D. ambulatory cards E. data of followup
775. Who occupational disease is to establish sanitary and hygienic characteristics of working conditions: A. doctor of occupational health CSSES* B. engineer safety C. head medical prophylactic establishment (MPE) D. doctor of professional pathology E. craft therapists
776. What type of ionizing radiation is measured actinometer: A. infrared* B. radiowave C. ultravioet D. overhighranged E. laser
777. For a number of employees is calculated incidence occupational disease: A. 1000 working* B. all work C. works with this harmfulness D. on people yearround E. on 500 employees of both sexes
778. What kind of instrument used to record the relative humidity in the premises during the day: A. hygereter* B. ostsillograf C. kimograf D. barograf E. vibrograf
779. The units of measure the temperature: A. Celsius* B. to cal/cm min. C. to k/cal D. to Watts E. in percentages
780. How to measure small appliance air velocity: A. elektrotermoanemometer, catathermometer* B. cup type anemometer C. aktinometer D. barotermogigrometer E. radiometer
781. How long instrument measures air velocity: A. cup anemometer* B. katatermometer C. psychrometer D. aktinometer E. elektrotermoanemometer
782. What kind of instrument can measure the difent air velocity: A. elektrotermoanemometer digital anemometer* B. cup formed anemometer C. psihereter D. katatermometer E. aktinometer
783. What is heat radiation and range: A. electeragnetic waves with wavelengths ranging 760 nm to 10 mm* B. elekteragnitnoe radiation with a wavelength of 0,76 to 70 microns C. the optical zone of the electeragnetic spectrum D. electromagnetic wave causes a feeling of vision E. overhighranged field of radio frequencies
784. What is the receiving part actinometer: A. thermopile* B. galvanometer C. sensor D. corpus E. frame device
785. The units of measure the intensity of the thermal radiation, actinometrical, and evaluated in accordance with public health standards: A. in cal/cm2 min and W/m2* B. to kcal/cm2 min Celsius C. in% and Celsius D. in% and kcal/cm2 min E. to kcal and Celsius
786. In any of the above document assesses the working environment: A. Sanitary standards and rules 020306* B. Sanitary standards 322385 C. Sanitary standards 24571 D. Construction norms and rules (CNandR)11479 E. GOST System safety standards12.100588
787. When evaluating the working environment are taken into account: A. season of the year, the severity of work, climatic features of the area* B. ofseason of the year, time of day C. heaviness of the work, the nature of toxicological D. satellite production factors E. floor, climate, social location
788. What is involved in the evaluation of sanitary standards of infrared radiation: A. value of the irradiated surface of the body working* B. is the intensity of the thermal radiation C. the presence of confounding factors D. availability shields E. buildingclimatic zone
789. At what outdoor temperature during the year relates to the Heat: A. above *10°C* B. 10°C and below* C. 5°C or below* D. 2°C and above E. above *20°C
790. At what outdoor temperature during the year relates to the cold: A. *10°C and below* B. above *10°C C. below *15°C D. 0 to 15°C E. below 0°C
791. What should be done primarily in the hygienic assessment of the microclimate in the production of: A. learning process and clarify the sources of this factor* B. measurement temperature C. drawing up scheme sketchpremises D. carrying out of necessary calculations E. signing the measurement protocol
792. If the sanitary examination found that the shop air temperature is 28°C, humidity 80%, the velocity of 3 m/s. What are the levels to be compared t that still need to take into account the hygienic assessment of microclimate parameters: A. optimal: the season of the year, the severity of the work* B. admissible: climatic features of the terrain C. middledays: intensity of work D. equivalent: the severity of the labor E. middleday: season of the year
793. Is microclimate parameters evaluated by comparing them according to the norms of the heat period of the year, when the outdoor temperature is *6°C, and why: A. wrong: heat period *10°C* B. a regular: the warm period is counted *5°C C. regular, but only for the temperate climate D. regular, but only to the climate of northern areas E. a regular, warm period is considered to *3°C
794. How many times to replace the need to measure climate in the production of: A. 3* B. 2 C. 1 D. 4 E. hourly
795. Doctor when considering construction projects compares with projected weather conditions: A. optimal sanitary standards* B. umipr margins C. lower margins D. means rates E. norms permanent jobs
796. The physician in assessing the working environment measurement values are compared with some rules: A. optimal* B. means rates C. admissible permanent jobs D. admissible on nonpermanent jobs E. norms for warm season
797. Of permanent jobs is: A. space, up to 2 m, which is running over 50% of the change or 2 hours continuously* B. the space of 2 m the floor, where he works is greater than 30% change C. space of up to 3 m, which is the entire working shift D. space of up to 3 m, which is working 3 hours continuously E. the space where the works are 40% change
798. Is evaluated parameters of the microclimate in the measurement of them in the cold season, when the outdoor temperature is *14°C, and why: A. correctly, the cold period is considered to be a temperature of *10°C at or below* B. are regular, the cold period is considered to be a temperature of *15°C at or below C. regular if the climate is considered to be moderate D. regular if the climate is considered to be hot E. are regular, the cold period is considered to be at *20°C
799. The project construction is designed ventilation in the shop provides acceptable norms of microclimate. Is this correct and why: A. does not, because microclimate parameters shall conform to the optimum level* B. no, because microclimate should correspond meanstandards C. yes, the project is designed to correspond to sanitary standards D. no, because it does not take into account particular climate E. no, because it does not take into account the severity of work
800. In the foundry is marked on the permanent workplace thermal radiation of 350 W/m2, the air temperature at 5 degrees higher than permitted. The shop runs total supply air and local exhaust ventilation. What other measures are needed: A. air dushirovanie shielding* B. is the thermal curtains, clothing C. the device of fotariev D. profilaktic food E. repeated coaching, poludushs
801. Working thermal management addressed in the medical health center complaining of fatigue, thirst, cramps in the legs, feeling the heat. What indicates this condition: A. hyperthermia* B. gipotermiyu C. gipodinamicheskie disorders D. fatigue E. insomnia
802. In measuring the intensity of infrared radiation is 2,1 cal/cm2 per minute. In comparison with the sanitary standards required: A. using the coefficient to translate the intensity in W/m2, and know the value of the irradiated surface of the body working* B. transfer radiation intensity in W/m2, and know the time of exposure C. transfer radiation intensity in degrees and know the profession D. transfer actinometer scale of measurement in W/cm2 and to know the severity of the labor E. advanced radiometer to measure the intensity of radiation
803. What are the possible impacts on industries operating heating microclimate: A. forging, metallurgical, thermal* B. spinning, weaving, tailoring shops C. with underground mining of underground resources D. when performing auxiliary works in construction E. when performing work at height
804. In which industries may impact climate cooling: A. refrigeration plant, shipbuilding, work outdoors in the winter* B. textile, shoe C. polygraphic, underground D. furniture, chemical E. metallurgical, engineering
805. What are the possible effects of alternating productions microclimate: A. construction, agricultural* B. furnture, machinebuilding, chemical C. metallurgical, sewing D. polygraphic, glass E. textile, coal mining
806. Which indicators describe the thermal state of the body: A. heatfeeling, T skin and body, while the reflex reaction to the heat, the heat balance* B. O2 consumption, the state CVS C. state CVS and respiratory system, fatigue, productivity D. heatfeeling, the state of the central nervous system, performance, body temperature E. characteristic conditions and work organization, efficiency and productivity
807. Specify the sequence estimation heatfeeling 5 point scale: A. cold, cool, good, warm, hot* B. hot, cold, indifent, warm, good C. cool, warm, good, indifent, well D. good, hot, cold, cool, warm E. hot, cool, cold, hot, warm
808. What thermotaxis: A. in conjunction with each heat generation and heat trans processes, neuroendocrine regulated by* B. providing a favorable state of health of the body by creating an optimum microclimate C. ability the body release heat to the environment by convection, radiation, evaporation D. ability body's heat production to increase, depending on the microclimatic conditions E. create a favorable state of health of workers using personal protective equipment
809. When periodic medical examination of a number of timber cutters phenomenon revealed vasospasm lower extremities, acrocyanosis, reducing the temperature of the skin feet and hands. How would you describe this state: A. hypothermia* B. gipodinamiya C. fatigue D. hyper termiya E. astenic syndere
810. What is the chemical thermoregulation: A. regulation of heat in the body* B. reallocation ways heat dissipation body C. hetexchange organism and the environment D. change heat sense E. changing the quantity of heat
811. What is the physical thermoregulation: A. regulation between the organism and the environment* B. regulation climate in manufacturing C. use working MIP D. change heat sense workers E. regulation heat production in the body
812. How does the body heat loss by convection: A. heat the surface of the body is transfered to flow less heated layers of air to it* B. heat radiated the body surface toward the surface at a lower temperature C. heat transfered the hotter surface of the body to less D. heated surface in contact E. heat the body surface is given in the perspiration and respiration
813. How does the body heat loss by conduction: A. heat transfered the hotter surface to a less heated body surfaces in contact* B. heat the surface of the body is transfered to the less heated flow of air layers it C. heat the surface of the body is given when sweating D. heat radiated the body surface toward the surface at a lower temperature E. heat passed through the legs
814. How does the return of heat by radiation: A. person gives off heat in the direction of the surfaces of lower temperature* B. by reducing the body's heat production C. heat given when sweating D. heat the surface of the body is transfered to flow less heated layers of air to it E. with direct body contact with surrounding objects
815. What are the instruments is determined by the total heat output: A. bioheat meer* B. aktinometer C. termoanemometer D. elektrotermoanemometer E. medical thermometer
816. What instrument measures the body heat loss by radiation: A. Radiometer* B. heat meter C. aktinometer D. anemometer E. psychrometer
817. When evaluating the thermal radiation is taken into account: A. the power of the radiation given the magnitude of the irradiated surface of the body* B. heaviness labor season of the year C. yearperiod and emission spectrum D. duration irradiation MIP E. is the temperature of the air inside and outside
818. The simplest method of determining the heat of the body by evaporation of sweat in a production environment: A. evaporation of sweatstatus indicators* B. chronorefleksometer C. gigrometer, radiometer D. bioheat meter E. method filter notebooks
819. Which of the following indicators to evaluate the state of thermoregulation: A. heart rate, skin temperature, blood pressure* B. the frequency of breathing, minute volume of blood (MVB) C. is the temperature of the body, heat sense D. changing body mass, water balance E. shift morphological composition of blood
820. What kind of instrument is measured skin temperature: A. medical electrothermometry* B. spirit thermometer C. mercury thermometer D. bioheat meer E. radiometer
821. In what ways will be given to the heat when the temperature of air *360C, 55% humidity, the temperature of the wall 300C: A. perspiration, means of heat* B. with exhaled air C. convection, conduction D. with convection, radiation E. with sighs
822. What are the main ways the body heat loss to the environment at a high temperature: A. evaporation of moisture the skin and lungs* B. conduction, perspiration C. radiation, conduct D. conduction radiation E. conduction convection, radiation
823. What hamipns by heat at low temperature: A. radiation, convection* B. perspiration radiation C. conduction, exhaled air D. conduction, perspiration E. perspiration moisture the skin and lungs
824. What are the main way of return of heat by the body at high relative humidity and normal temperature: A. holding, convection* B. with exhaled air C. conduction D. radiation E. perspiration
825. How to change the heat production at 150C ...... *200C: A. does not change* B. increases C. decreases D. changes minor E. maybe, or increase or decrease
826. How does the heat production of the body at a temperature between 100C to 150C: A. Increases* B. decreases sharply C. decreases slightly D. changes waves E. not changes
827. How does the body's heat production when the air temperature in the aisles 300C to *350C: A. drops* B. improves C. not changes D. change slightly E. maybe, or increase or decrease
828. What changes the body's heat production at *400 ... .. *450: A. increases* B. decreases slightly C. –significantly D. undulating changes E. not changes
829. What influences the strengthening of the body's heat loss by radiation: A. temperature of the surrounding surfaces* B. is the temperature and humidity C. humidity and air velocity D. thermoisolation surrounding objects E. is the temperature and air velocity
830. In some dependence be wavelength infrared radiation and its temperature: A. inversely* B. to directly proportional C. do not depend on each other D. not always depends E. to depending on the paint the walls, ceiling and floor
831. How does the power of the radiation with increasing temperature of the radiating body: A. 4 increases in proportion to the degree of its absolute temperature* B. decreases proportional to the 4 degree of absolute temperature C. increases directly proportional to the temperature of the radiating body D. reduces proportional to the temperature of the radiating body E. increases 50% increase in temperature
832. Does the ability of radiating the body temperature: A. does not* B. yes C. sometimes D. partially E. it depends on the color of the surrounding surfaces
833. How the spectral composition of the radiation (wavelength) with increasing source temperature: A. to ward shorter wavelengths* B. to longer wavelengths C. not changes D. changes waves E. part toward shorter, the part to longer
834. What changes occur in the body when the impact of climate heating: A. increase in skin temperature, body sweating, tachycardia, increased systolic and diastolic blood pressure lowering* B. the temperature of the body is not changed, BP is not changed, increased sweating C. strenthens sweating, decreased body temperature, skin, blood pressure falls, bradycardia D. decrease in temperature of the skin and fever, tachycardia, decreased systolic and diastolic blood pressure increase E. the temperature of the skin increases, the body does not change, rapid breathing and heart rate, blood pressure does not change
835. What changes occur in the body during cold exposure: A. peripheral vasoconstriction, bradycardia, increased blood pressure, increased heat* B. the restriction of the superficial and deep blood vessels, tachycardia, decreased blood pressure, decreased metabolism C. tonus vessel does not change, tachycardia, shortness of breath, D. improves diastolic and systolic blood pressure decreases E. reduces blood viscosity, blood flow, secretion of adrenaline,
836. What is one of the first signs of cooling of the body: A. reduction in the temperature of the skin* B. violation reflex activity C. assimilitation pulse D. increase blood pressure E. assimilitation breath
837. What diseases can occur when assimilitation in the cold impact: A. sciatica, rheumatism, bronchitis, arthritis, frostbite* B. tachycardia, keratitis, myalgia C. neuroasthenia , peptic ulcer disease, osteoarthritis D. cataract, hypertension, eczema, convulsive disease E. asthenovegetative syndere, gastritis
838. Which of the eye disease develops when exposed to infrared radiation (radiant heat): A. cataracts* B. glaucoma C. elektrooftalmy D. cystitis E. myopia
839. How does the body temperature at a sunstroke: A. does not change* B. increases C. changes waves D. reduces E. shift minor
840. How does the human body temperature in acute hyperthermia: A. rises sharply* B. changes waves C. decreases D. not changes E. small changes
841. What are the most radical measures to combat the adverse (heating) weather conditions; A. automation, mechanization, screening, aeration* B. mode of work and rest C. drinking mode D. use of MIP E. rational ventilation, a warning and a preliminary medical examination
842. Which of the preventive measures identified by the most radical steps to reduce the infrared radiation in the workplace: A. mechanization, screening airshowering* B. rational ventilation C. rational layout D. MIP, drinking regime E. mode of work and rest, and the preliminary warning medical checkup
843. Which of the following is most effective ventilation system to combat excessive heat A. airation and ventilation public* B. airshowering, local exhaust ventilation C. ventilation general ventilation is D. general and local exhaust ventilation E. air oasis, local exhaust ventilation
844. Which of drinking water resources are most effective for the prevention of overheating in hot shops: A. aerated salty water* B. freezing soda C. proteinvitamin drink D. oxygen cocktail E. green tea
845. Use of MIP whether the leading measures of prevention of the effects of microclimate heating: A. does not* B. yes C. sometimes D. partially E. to depending on the mode of work
846. What are the most radical measures to combat climate cooling: A. technology, rational mode of work and apparatus for heating working, MIP* B. rational natural and mechanical ventilation, preventive nutrition C. mechanisation, drinking regime, training D. preliminary periodic medical examination (PME) E. MIP, san. enlightening work
847. As the dust is classified by origin: A. organic, inorganic, mixed* B. the natural, plant C. aerosol disintegration, soil D. aerosol, condensation, mineral E. the chemical, synthetic
848. In some cases, it is necessary to determine the dust content of air: A. for a planned inspection, investigation occupational disease, taking the object* B. estimates severity and intensity of labor C. find dust dispersion D. assessment solubility dust E. with the characterization of working conditions
849. Which of the following works should be carried out under hygienic assessment of particulate air pollution: A. create a sketch, take samples of air* B. identify ventilation C. find out dust sources D. trace time bleed E. finallycompose
850. What method is used in practice to quantify particulate air pollution; A. weight* B. spectrphotometric C. sedimentative D. cherategraphic E. chemical
851. What equipment is necessary to determine the dust content by weight: A. aspirator, allonge, filter, analytical balances* B. sedimentative camera eyepiece micereter C. reometr, allonge, vacuum cleaner D. microscopy, filter objectmicereter E. spektrophotometr, analytical balances
852. How is determined by dispersion of dust: A. microscopy enlightened filters* B. countable C. the weighting D. spectrphotometric E. chemical
853. Evaluate working conditions, if the concentration of dust containing 40% silica is 16 mg/m3: A. unfavorable, because dust exceeds MPC 8 times* B. laborconditions meet the hygiene requirements C. laborconditions favorable, because MP dust concentrations below the maximum possible concentration D. unfavorable laborconditions, because dust above the MPC 16 times E. pollution exceeds 10 times
854. What effect will lead the action of vegetable dust: A. allergic* B. fibrogenic C. toxic D. embriotrophic E. annoying
855. The action of mineral dust, the effect will be the lead: A. fibrogenic* B. sensibilazing C. toxic D. annoying E. hepatotoxic
856. What is basically determined by the risk of the effects of aerosols mainly fibrogenic action: A. content of crystalline silica* B. large water solubility C. small water solubility D. elctrocharged, specific gravity E. weakphagocytosis
857. Essence of air sampling to determine the gravimetric method: A. pulling air through the weighting filter* B. count dust in a special chamber C. precipitation dust in a special chamber D. filling vessels studied air E. transmission air through an absorption bottle
858. Any combination of physicochemical properties of the dust largely determines its effect on the organism chemical composition, dispersion* form and consistency of dust heatpermeability, the proportion of explosiony danger, wettability electrcharged shape
859. Which of these plants dust is a leading factor of production: A. mining* B. chemical enterprise C. textile production D. tanning plants E. polygraph production
860. What to consider while hygienic rationing of industrial dust: A. content dioxide silicon toxic properties* B. mineralcontent of the C. power dispersion and wettability D. electrcharged hardness E. form dust particles, the specific surface area
861. What form depends settling dust in the air: A. dispersion, specific gravity* B. consistency and shape of dust particles C. solutioning dust hardness D. is the temperature and humidity E. mobility air and humidity
862. When no operations aerosol condensation is formed: A. melting metal, electric* B. grinding, polishing C. digging, suction D. drilling, blasting E. traffi powders
863. What is the most serious cause dust occupational diseases: A. pneumoconiosis* B. laringotracheitis C. glossitis D. rhinitis E. gastritis
864. Fibrogenic dust increases with the content: A. silica* B. stone coal C. talka D. –alumina E. iron
865. What are the measures to combat the dust is more radical: A. technical, technological* B. architecturalleveling C. application MIP D. carrying out of periodic medical checkup E. the device of the inhaler fotarys
866. What cees used for respiratory protection against dust: A. respirators* B. pneumohelmets C. bandages D. filter masks E. isolate masks
867. What ventilation is recommended to control dust: A. mechanical local exhaust and general plenum* B. aeration, general exchange C. general exhaust, spotnatural D. place, supply and exhaust E. general exchange, plenum
868. What diseases other than pneumoconiosis, are more common in people working in contact with dust; A. skin* B. nervous system C. heart D. joints E. stomach
869. What is needed to determine the dust content counting method: A. microscope sedimenter, ocularmicereter* B. aspirator, ejector, cotton C. filter, allonge, scales D. electric scales, blower, gauze E. compressor rheometer
870. Condensation aerosol is in the form: A. spherical* B. block C. plastina D. crystal E. wrong
871. If no papers produced aerosol disintegration: A. crushing, grinding* B. by fused, boiling C. tablet ting D. application pellets E. filtration, compression
872. In preparation shop textile mill dust concentration containing 6% silica is 36 mg/m3, and the total noise 90 dBA. Rate the working conditions: A. because it is dysfunctional dust above the MPC 9 times, the noise above RC 10 dBA* B. favourable, because the levels of the factors in the aisles permissible norms C. unfavourableof dust D. unfavourablenoise level E. unfavourable, because the dust above the MPC in 18 times, and the noise above 5 dBA on the remote control
873. Who is schedule periodic medical observing who his consent: A. head medical sanitary part, doctor CSSES* B. engineer safety doctor CSSES C. doctor in occupational health, head medical prophylactic establishment (MPE) D. principal department of health, the chief doctor CSSES E. principal sanitation department CSSES, chief physician clinics
874. Specify the correct definition of "permanent workplace": A. work area where work is more than 50% of the time or 2 hours continuously* B. place permanent stay working at least one hour per shift C. working area where work is more than 30% of the time D. working area where work is more than 80% of the time, or at least 4 hours E. place where the work during the entire shift
875. What kinds of official documents are divided into: A. legislative, administrative, financial, accounting, personal* B. regionalistic, sector, organizational, instructional C. guests, sanitary norms, sanitary regulations, guidelines D. methodical guidance, teaching writing instruction E. core regulating, recommendation, personal
876. What kind of divided legislative documents used in the work of the doctor in occupational health: A. basic, regulations, instructions and methodology* B. legislative, mainly recommendation C. orders, orders, instructions D. major, constituent, reence E. methodical, standards, policy, financial
877. Check preparedness for the autumnwinter period was in november, and the elimination of defects in accord with the shop foreman. Rate action CSSES doctor: A. broken the term verification, it is necessary to negotiate with the administration of the object* B. term and harmonization carried out correctly C. violated review period, matching the right D. term is correct, it is necessary to negotiate with the safety engineer E. term correct coordinate with the guild practitioner
878. The main factor affecting the health concerns: A. in the natural, social and economic* B. state medical care C. geographic terrain D. density of population in the territory of residence E. age and sex
879. One of the major tasks of occupational health is: A. decrease in general and prevention of occupational diseases* B. increase working life C. notice messages injury D. elimination occupational poisoning E. increase productivity
880. Choose the best important natural factors affecting human health A. environment, heredity, biological characteristics of the organism* B. scientific and production microclimate, electeragnetic fields C. the presence of natural lighting D. floor and age, medical software E. professional affiliation
881. Socioeconomic factors affecting human health include: A. familyliving conditions, occupation, working conditions* B. climatic terrain C. social position in society D. political structure, marital status E. floor and age, budget
882. What are the indicators of health status: A. demographic, physical, development, disability, morbidity* B. reproduction population mortality C. clinical picture, the severity of the disease and its outcome D. lifeconditions, work organization, the natural environment E. the presence of specialized medical institutions
883. What are the methods used in the study of disease: A. on uptake, according to medical examinations for reasons of death* B. deepening study of working conditions C. deepening health studies D. by a study of efficiency and productivity E. on the main causes of increased incidence
884. The main objectives of the study of the incidence of work: A. fixed causality effect of working conditions on the incidence and development of measures for its reduction* B. calculation economic efficiency C. calculation economic damage D. labor rehabilitation work E. identification of hazards
885. What should be studied to elucidate the role of working conditions in the formation of the incidence of work: A. depth study of the conditions and organization of work* B. to identify the costeffectiveness of health measures C. to identify the structure of disease D. outwitfacial account of occupational diseases E. outwit briefing
886. What are the causes of the most significant effect on the incidence of work: A. diet and preventive nutrition* B. conditions and work organization, professional affiliation C. providing ablution facilities D. the presence of the health and health centers E. provide MIP, health education
887. Analysis of the incidence of uptake frequently holds: A. c temporary disability* B. without disability C. on causes of death D. by hospitalization disease E. by pictures periodic medical examinations
888. What is the main official document for reporting the incidence of its uptake: A. return on the causes of temporary disability in the form of 16temporary disability (TD)* B. outpatient card C. report on causes of death D. being ill according to medical examinations E. summary act of the periodic medical examination
889. Based on what made data on morbidity in the form of 16temporary disability (TD): A. sick leave* B. registering complaints C. results periodic medical checkup D. report of inpatient care E. this clinical examination
890. Report on form 16TD includes: A. data of all sick leave, and not be payable* B. only these sick leaves payable C. data hospital treatment D. case prof. diseases and poisoning E. case diseases identifying influence clinical examination
891. Analysis of morbidity in the form of temporal loss of ability to workTD 16 has not revealed the cause of its growth over the past 2 years. What should the doctor CSSES: A. enlighten the incidence of indepth analysis by facial account* B. in the base quarterly analysis of morbidity C. analyze dynamics of occupational diseases D. find out long and often ill persons E. to identify the structure of disease
892. What kind of data needed to calculate indicators of temporal loss of ability to work: A. the number of cases of illness and number of employees and the number of them women* B. the average duration of one case C. denomination institutions write out sick leave D. economic losses disease E. characteristic working conditions of the workshops and the main occupations
893. How it is and how to express incidence with temporal loss of ability to work: A. number of cases multiplied by 100 and divided by the total number of employees, expressed per 100 employees* B. the total number of all diseases for the years 1000 morbidity C. the number of cases of prof. diseases identified for the year of 100 employees D. the number of cases detected during the inspection periodic commend the total number of inspected E. the number of prof. diseases
894. How is the structure of morbidity: A. are share (in %) of individual forms of disease among all diseases* B. recruiting share a long and often ill C. compares overall incidence for the year the previous year D. counts in “%” prof. diseases among all diseases E. sets share of morbidity for women
895. Over what time the doctor of hygiene analyzed the incidence of labor: A. on quarterly, half year, 9 month, year* B. this last 3 years C. this year D. halfyear compared with the previous year E. this last 5 years
896. What are the most frequently used for determining the validity of the dynamics of disease with temporal loss of ability to work: A. and its calculation of the average error criterion reliability Student* B. count changes in% C. means quarterly data D. dispers analysis E. annual analysis
897. What are the data of the best indepth analysis of the incidence: A. piece facial accounting incidence with temporal loss of ability to work* B. sick leave C. magazine negotiability registration of complaints D. summary act periodic medical examinations E. Report of hospital disease
898. 16 in the form of TD which indicators are made and that it is carried out: A. with respect, encryption diagnoses of diseases by classes* B. absolute, the number of people yearround C. duration disease and sex D. translation disability age E. translation to another work experience
899. If the indepth analysis of the incidence of the most frequently carried out: A. the analysis of profession and seniority shops* B. an indepth study of the working conditions C. drawing sheet facial account D. identify longterm and frequently ill persons E. the establishment of the structure of disease
900. On whose incidence greater effect of family and living conditions: A. positive women* B. were male C. teenagers D. engineeringmanagerial employees E. assistant workers
901. What mostly affects the frequency of the incidence of work: A. production and trade conditions* B. age working C. total experience D. state medical care E. family and living conditions
902. How are data characterizing morbidity with temporal loss of ability to work A. on a scale of Notkin* B. on the level of growth of general morbidity C. by reducing the number of cases of disability D. by increasing the number of cases of disability E. by determining the validity of changes in the incidence of
903. Specify the most radical measures to reduce the incidence of work A. change process automation mechanization* B. a rational regime of work and rest of MIP C. paint technical measures D. necessary conducting the clinical examination of all workers E. providing MIP health education
904. What kind of device is defined by the time of the reflex response to thermal effects: A. chronorefluxometer* B. elektrotermoanemometr C. difential radiometer D. aktinometer E. heat meer
905. How does the response time of the body to the heat stimulus when the heating microclimate: A. shorter* B. increases C. wave formed D. not changed E. changes weak
906. How does the response time of an organism to thermal radiation in the cooling microclimate: A. lengthens* B. shortens C. not changes D. changes waves E. can or shortened or lengthened
907. What are the main way of heat trans in comfortable weather conditions: A. conduction and convection* B. exhaled air C. radiation D. conduction E. perspiration
908. How is thermoregulation at working dyeing workshop where climate parameters are as follows: 90% humidity, air temperature *30°C and walls: A. heat radiation, reduction of heat in the body* B. rebound evaporation, heat generation increases C. rebound heat exhaled air, heat generation is not changed D. rebound heat conduction and evaporation E. heat bound
909. As a result of public reaction is supported by the heat balance in the body by cooling the microclimate temperature of air *12°C, the surrounding surfaces *16oC, humidity 85%: A. peripheral vasoconstriction, increase of heat generation in the body* B. extension of the peripheral blood vessels, increase of heat C. the restriction of the peripheral blood vessels, reduced heat generation D. increase in blood pressure and the minute volume of blood E. increased pulse
910. What ventilation is recommended to control dust: A. mechanical, local exhaust, general plenum* B. aeration, general exchange C. general exhaust, spot natural D. place supply and exhaust E. only aeration
911. What diseases other than pneumoconiosis, are more common in people working in contact with the dust: A. skin* B. nervous system C. heart D. joint E. stomach
912. What is needed to determine the dust content counting method: A. microscope sedimenter, ocular meter* B. aspirator, ejector, cotton C. filter, allonge, scales D. electric scales, blower, gauze E. compressor rheometer
913. Condensation aerosol is in the form: A. spherical* B. lump C. plates D. crystalls E. wrong
914. If no papers formed aerosoledesintegration: A. crushing, grinding* B. by fused, boiling C. tebletizing D. application pellets E. screening
915. In preparation shop textile mill dust concentration, comprising 6% of silica is 36 mg/m3, and the total noise level of 90 dBA. Rate the working conditions: A. dysfunctional, dust above the MPC 9 times, the noise above RC 10 dBA* B. favourablee since factor levels within acceptable limits C. unfavourablee of dust D. unfavourablee noise level E. unfavourablee since dust above the MPC in 18 times, and the noise above the remote control at 5 dBA
916. When underground mining of ore dust concentration containing 25% silica is 64 mg/m3, the noise above 10 dBA on the remote control, the air temperature *25oC. What is the driving factor and why: A. dust because it exceeds MPC by 32 times* B. noise and temperature C. all factors must be considered equally dangerous D. bullet since it exceeds the maximum permissible concentration 16 times E. microclimate
917. What equipment is still needed to determine the dust counting method if the laboratory has sedimenter microscope: A. ocular micereter* B. allonzh C. aspirator D. reometr E. barotermograf
918. Which of these factors in underground work significantly enhance the adverse effects of the dust factor: A. vibration radioactivity* B. voltage labor C. no daylight D. insufficent illumination, forced working posture E. is the depth of the mine, watery
919. Which of these dusts res to selicate: A. asbestos* B. organic C. plant D. cotton E. artificial
920. The activity increases with the dust: A. particulate* B. filament C. alkaline D. solutability E. is the specific weight
921. Under what processes formed large concentrations aerosoledesintegration: A. drilling and blasting* B. by fused, boiled C. manufacture of furniture D. cultivation metals E. stucco works
922. Specify the correct sequence of steps for hygienic evaluation of the content of dust in the working area: A. learning process, drawing sketch, sampling* B. selection samples, drawing sketch, weighing allonge C. filling protocol, a comparison with the rules D. calculation dust formula, comparison with MPC E. selection trial and evaluation in accordance with GOST 12.1.00588
923. Which group of factors relates to fibrogenic dust: A. physical* B. chemical C. biologic D. are the natural E. psychophyisiologic
924. What methods of assessment, there are dust: A. weight* B. measurements on IJ1 C. photometric D. radiometric E. cheratographic
925. What is the physical properties of the dust: A. solubility, volatility* B. dustform C. chemical composition D. allergenic E. toxicity
926. What is not used to assess the dust gravimetric method: A. microscope* B. weight analytical C. filter D. allonzh E. aspirator
927. What should be carried out for the improvement of working conditions in underground mining in view of their importance: A. wet drilling, ventilation, work and rest* B. mechanisitaion, MIP, lighting C. mode of work and rest, medical checkup D. organization fotariev recreation E. core and repeated instructions, MIP
928. Which of these characteristics are leading the dust to assess its prof.dangerous: A. concentration, dispersion, chemical composition* B. specific weight, physical state, duration C. sorbtive ability, wet ability, shape D. density, wet ability, volatility E. the presence of a specific action, a method of forming
929. What tools are needed to determine the dispersion of the dust: A. microscope eyepiece and obektiv.mikeretry* B. analytic scales C. photoelektrokalorimetr D. gase cheratograph E. sediment camera
930. What is best used as a filter material: A. filter* B. tampon gauze C. gyroscopic wool D. activated carbon E. silikogel
931. Which of the following factors most affect the orign of "dust disease": A. dust concentration, chem. composition, dispersion* B. form dust particles and their consistency C. ability phagocytosed in the airways D. irritating effect E. age, gender and individual sensitivity
932. What size of specks of dust belongs to t ultramicroscopic: A. less than 0.25 microns* B. less 1 micron C. 25 micron D. 510 micron E. 1025 micron
933. What size of specks of microscopic dust particles: A. 0m2510 micron* B. less 0m25 micron C. 0.010.03 micron D. 1020 micron E. 1525 microns
934. What size of specks of the grains res to visible dust: A. more than 10 microns* B. 25 microns C. 13 microns D. less 0.25 micron E. 0.030.05 micron
935. Tuberculosis is concomitant with the disease is more aggressive: A. silicosis* B. allyuminioze C. antrakoze D. bissinoze E. sideroze
936. What kind of pneumoconiosis is the most dangerous: A. silicosis* B. allyuminioz C. bissinoz D. antrakoz E. siderosis
937. What is mainly determined by the degree of delay in the lung tissue of aerosols: A. particulate, electrchargedi* B. form of dust particles, specific gravity C. is the chemical composition grease D. soluability E. allergennostyu, radioactivity
938. Which of them is dust ginneries: A. mixed* B. organic C. mineral D. metal E. artificial
939. Dust normalized according to: A. of free silica chem. composition* B. electrcharged, resistance C. dispersoty, specific gravity D. allergic properties E. solubility
940. What dust containing more than 70% of free silica: A. 1 mg / m3* B. 6 mg / m3 C. 4 mg / m3 D. 3 mg / m3 E. 10 mg / m3
941. What dust containing less than 2% free silicon dioxide: A. 6 mg / m3* B. 1 mg / m3 C. 4 mg / m3 D. 2 mg / m3 E. 10 mg / m3
942. Aspirator "Aera" is used: A. in areas where there is a danger of explosions* B. textile industries C. hot shops D. silky winding factories E. mechanical shops
943. In pairs of substances enlightened filter for dust dispersion studies: A. acetone* B. phenol C. grey anhydride D. ammony acid E. ethyl alcohol
944. What should be measured in order to bring the volume of the test air to normal conditions: A. the air temperature, baeretric pressure* B. is the absolute maximum and humidity C. the velocity of pulling air D. infrared radiation E. time air sampling
945. What is a normal condition: A. temperature *20°C, atmospheric pressure 760 mm Hg* B. warm season C. coldly season D. is the temperature of air *10°C and above E. temperature temperature *15°C, at a relative humidity of 75%
946. How many samples need to take away the dust at every point: A. is not less than 5* B. sufficiently 1 C. 3 trials D. 2 samples E. 4 sample
947. Which of the following organs most sensitive to fibrogenic dust: A. easy* B. liver C. organs view D. organs hearing E. gastrointestinal tract
948. In view of education which relates dust furniture factory: A. aerosol disintegration* B. aerosol condensation C. dust mineral D. liquiddroplet aerosol E. artificial
949. The dust formed when grinding the marble surface of origin relates to: A. mineral* B. mixed C. desintegration D. kondensatsii E. mechanical
950. When electric welding dust released into the air mixed composition. What method is defined as the normalized and the dust: A. gravimetric method, on the most toxic components* B. countable method, the content of manganese C. find dispersion, standardized formula Averyanov D. the weighting method, considering the origin of dust E. calorimeter method
951. What is the electeragnetic field (EMF): A. special form of matter, through which the interaction between charged particles* B. elekteragnetic fluctuations visible and ultraviolet part of the spectrum C. elekteragnetic field of radio frequencies D. an electric field, causing the surface to display an electrical charge E. EFM
952. What kind of electeragnetic fields related to nonionizing portion of the spectrum: A. electrostatic, magnetic constant, lowfrequency power frequency EMF, infrared, visible UV radiation* B. xray and cosmic radiation, microwaves C. inhalation and the emission of highenergy Xrays D. continuous alternating magnetic field of industrial frequency E. infra red and visible light, microwaves
953. How is classified EMF wavelength: A. long, medium, short, ultramicrowave* B. lowranged, highfrequency, microwave C. microwave, ultra rangedlong D. ultultravoice hort E. ultultravoice hort, highfrequency, microwave
954. How is classified EMF frequency: A. high end, ultraranged, overranged (UHF)* B. microwave, Xray and ionizing radiation C. ionizing and nonionizing D. Xray and cosmic rays E. means short
955. What are the physical parameters characterize the power of EMF: A. electric, magnetic fields, energy flux density* B. direction electric field, the velocity of propagation in air C. ability enter the body and cause bioeffect D. ability impact on surrounding objects and bounce off them E. ability propagation in vacuum, exposure to operating on
956. What are the main areas isolated by radiation EMF: nearest induction, far wave* direct radiation reflected radiation zone magnetic radiation zone electric light zone ultraviolet radiation
957. An examination of working conditions on radar to measure the power of the microwave field. What you need to also take into account for comparison with hygiene standards: A. the air temperature and the course of this factor* B. parameters of the microclimate, vibration C. noise and ultultravoice ound D. consider when comparing the time of day E. ilness
958. In which area of highfrequency radiation will often be working: A. induction* B. interentsion C. the wave zone D. zone high radiation E. in low emission zone
959. In which area of UHF radiation EMF will be working most of the time: A. induction* B. interentsion C. the wave zone D. zone high radiation E. in low emission zone
960. In which area of microwave radiation EMF will be working most of the time: A. wave* B. induction C. interentsion D. in the near zone E. in the middle zone
961. The units of measure the electric field UHF: A. B/m* B. A/m C. Vt/m2 D. mkVt/cm2 E. PA
962. The units of measure the energy flux density of microwave EMF: A. W/m2* B. V/m2 C. PA D. A/M E. Kcal
963. To clarify the sources of radiation at work hardening HDTV radiation power is measured only in the workplace have a quenching circuit. Is this correct and why: A. no need to measure more and waveguides and generator* B. yes, this corresponds to instruction C. no, simultaneously necessary to measure the time spent in the shop D. no, to be measured at the antenna E. no, to be measured in the workplace
964. The basic method is to control the level of EMF: A. instrumental level measurement of EMF* B. subjective feeling of exposure to EMF C. clinic and laboratory data D. counting techniques level EMF E. data periodic medical checkup
965. What instrument measures the electric field of high frequency: A. meter nearfield (IMP1)* B. vibrotestor (BT2) C. counter noise D. noise 1 E. counter SHVK 1
966. What instrument measures the magnetic field of high frequency: A. meter nearfield (IMP1)* B. counter static field C. vibrotestor (BT2) D. noisemeter ESHV003 E. KCHZSM
967. What instrument measures the electric field UHF: A. meter nearfield (IMP1)* B. counter constant fields C. chronorefleksometr D. vibrotestor (BT2) E. noisemeter ISHV 1
968. List the given sequence of the main sources of radiation EMPR when used in the industry: A. generator, HF transformer, waveguides, work path* B. line power, wave guides, HF transformer C. working circuit, HF transformer D. condensator, feeder lines, antennas E. antennscapacitor
969. List the given sequence of the main sources of radiation EMF when used for communication: A. generator, a condenser, waveguides, antenna* B. powerline, an antenna, a generator, an indicator C. generator, waveguides, transformer D. videoterminal, antennas, waveguides E. terminals, transformer
970. Adjusters radar equipment file a complaint to the sharp deterioration of vision and dream. What could be the reason? What measures should be taken? A. radiation of the microwave field, directed to treatment* B. find outoperation time and place of the rest C. influence HF and UHF radiation, the use of points D. influence noise sent to the hospital for diagnosis E. direct to another job
971. What instrument measures the magnetic field UHF: A. measuring the near field of the PFM1* B. counter statistical fields C. chronoreflexsometr D. noisemeter ISHV1 E. dynamometer
972. What instrument measures the energy flux density of the microwave field: A. PO1 "Medic"* B. noise1 C. KISAM D. VSHV003 E. spektrometr
973. What are the principles of the hygienic regulation RC EMI (HF and UHF) A. standardized by electric and magnetic component of the load, taking into account the energy and time of exposure* B. with considering the energy flux density C. with taking into account confounding factors and exposure time D. to depending on the nature of exposure (batch and continuous) E. to depending on the mode of exposure (continuous and pulsed)
974. Does the time factor in the normalization of the remote EMPR: A. accounted depending on the oscillation frequency* B. no C. sometimes D. considered the state of the screening E. considered on the state of the environment
975. What are the principles of valuation and microwave remote EMF the units: A. standardized W/m2 or mW/sm2 in view of the nature of the impact, the energy load and time of exposure* B. rates depending on the kind of exposure (intermittent continuous) C. rates given dose received electric component D. rates only depending on the load on the energy working with EMI E. rates in A/m2 for the magnetic component
976. How does EMF on the body: A. EMF has thermal and specific action in the form of radio wave sickness* B. leads cavitation in hollow organs and tissues C. changes the peripheral blood and leads to disruption of metabolic processes D. action on the central nervous system and cardiovascular system, causing encephalopathy and symptoms of tachycardia E. shows selective effects on organs and tissues with low water content
977. When periodic medical checkup a number of radioelectronic industry workers marked: sleep disturbance, hypotension, bradycardia, decreased vision. What it also indicates that we must take: A. development of the disease on the radio, re for medical treatment* B. availability asthenovegetative syndere, change profession C. development of fatigue, give an extraordinary paid leave D. up diagnosis investigate working conditions E. direct to another job
978. Specific action EMF mainly manifested in: A. the development of cataracts, changes in the functional state of the central nervous system and the CVS* B. change the functional state of the peripheral nervous system C. damaging articular and ligamentous apparatus working D. increase skin temperature, hearing loss E. hypertonia, violation of motor activity
979. What is the screen for EMF: A. metal (except Pb)* B. glass C. brick D. concrete E. tree
980. Select the most efficient sequence of measures to combat harmful effects EMF: A. organizational remote control at the stage of the SPE, engineering, medical and preventive* B. mode of work and rest, the use of MIP C. control the level EMF, origin PME D. cloud screening hygienic training E. formation PME in full compliance with the order №400, the use of MIP
981. What are the screens of EMF: A. metal; mesh, solid* B. carton, block C. limpid, translucent D. reflective, removable E. blochnye, mobile
982. What is the protection of the population EMF: A. design solutions, protection distance* B. Application shields in homes C. EMFapplicationforbidden in settlements D. dispanserize, san.clearance. work among the population E. EMFdefine operating levels in a residential area
983. What lasers: A. healing lasers operating in the optical range* B. instrument operating in the wavelength range C. generator operating in a range of industrial frequency currents D. generator operating in a range of ionizing radiation E. instrument, working in the medium wave
984. What are the lasers depending on the mode of radiation: A. pulse, continuous* B. breaking, permanent C. constants, fickle D. dynamical static E. static, electrical
985. The main elements of the laser: A. active environment, resonator, power supply* B. condensator transformer C. feeder line flashbulbs D. the stabilizer, the gaseous medium E. operating agent (solid gas)
986. What are the radiation to the optical range: A. infrared, visible, ultraviolet* B. TVCH, UHF C. visible, microwave D. radiowave currents of industrial frequency E. cosmic, Xray
987. Where are widely used lasers: A. mechanical engineering, electronics, communications, medicine* B. village sector, metallurgy, medicine, C. chem. industry and livestock D. manufacture of building materials, assembly work E. cesson, mining and coal industry
988. What are the factors of production are formed by the laser: A. specific and nonspecific* B. physical and chemical C. biologic, thermal radiation D. increased humidity and air velocity E. increased temperature, physical stress
989. What specific factors related to the application of the laser: A. direct, specular, reflection and diffuse radiation B. voltage eye and ear C. factor is the chemical, ultraviolet radiation D. noise and vibration, microclimate E. microclimate (heating, AC)
990. What is primarily attributable to nonspecific factors in the application of lasers: A. dust, noise, vibration, light intensity, infrared radiation, chemical factor* B. biologicfactor, physical and static electricity C. obligedworking posture, irritant gases D. voltage of organic solvents E. heating microclimate, emotional stress
991. What class of laser is the most dangerous: A. 4* B. 5 C. 3 D. 2 E. 1
992. What occupational disease scan develop when working with the laser: A. vascular dystonia, skin, cornea, retina* B. acute and chronic radiation sickness C. elektro oftalmiya D. hypoand hyperthermia E. koordinational neuroses
993. What groups are divided into preventive measures when working with the laser: A. technical, sanitary, medical and preventive* B. collective C. individual D. brigade, shift E. architecturalplanning
994. Specify the technical prevention measures when working with the laser: A. constructive improvement of lasers, their film adaptation and sealing* B. color in dark colors (art room) C. lightening within the normal range, ventilation D. ESP And overalls E. control of working conditions
995. Can be used in the field of art lasers, where the impact on the body may: A. yes, often on the stage and the circus, the effect on the organs of vision and skin* B. no, because their use is very rare C. yes, often in theaters (rehearsals) D. no, their use is forbidden E. prichanges double at work
996. Specify the sanitary and technical prevention measures when working with the laser: A. lighting, ventilation, separate room, control over working conditions* B. architecturalplanning decisions C. germetization , insulation, the vertical distance D. continuity, process E. san.enlight work, work and rest
997. Specify the medical and preventive measures of prevention when working with the laser: A. preliminary and periodic medical examinations, work and rest* B. germetization and adaptation of equipment C. base and rebriefing D. ventilation and lighting work san.enlight E. the fight with nonspecific factors
998. What are the legal instruments used to monitor the laser: A. Construction norms and rules (CNandR) 230281, GOST "Laser safety"* B. SR 110 479 C. SR "master plan" D. order Ministry of health of the Republic of Uzbekistan "On governmental san. supervision" E. GOST 12.1.00383 "Industrial noise"
999. Critical organs exposed to laser radiation: A. the eye, the retina, the skin* B. cerebral shell labyrinth C. vampire vessels, liver D. mucous of the eye, heart, E. stomach, intestines
1000. Electeramagnetic oscillations which are wavelength UV: A. 400200 nm* B. 1 sm1 mm C. 310 mm D. 180 nm to 130 nm E. 760 nm1mm
1001. What groups are divided into UV wavelength: A. short, medium, long* B. cilometer, meter C. short, ultralong D. deci, centi, mm E. wide, tonal
1002. UV radiation which group has a predominantly local effect on the skin and mucous membranes: A. mediumwave* B. millimetric C. ultultravoice hort D. meter E. santimetrovye
1003. What a sharp prof. disease occurs exposure to UV radiation: A. electroophtalmy* B. sores C. cataract D. blefarospazm E. iridotsiklit
1004. When you perform any of the above work, the highest levels of UV radiation; A. electric welding* B. gaswelding C. photocpying D. contact welding E. electrotype
1005. During conductuing electric welding in the assembly shop, two workers of neighboring workplaces presented complaints of sharp pain in the eyes, tearing, photophobia, redness. What is this disease, reason: A. elektrooftalmiya, electric welding jobs without barriers and a lack of personal protective equipment* B. conuktivit, eye contact condensation aerosol C. conuktivit, due to the high brightness of the Electric D. seasonal conuktivit, influence pollen E. inflammational diseases of heating zaotsutstvie
1006. In what situations may develop lightfast and that is the reason: A. work underground in a room with no natural light, the lack of UV* B. work in night shifts, the lack of brightness C. hot climate, excess infrared radiation D. work in refrigerators, cooling microclimate E. work in the weaving workshops
1007. What disease occurs when UV irradiation is insufficient: A. light fasting* B. hyper insolation C. asthenianeurotic syndrome D. hypothermia E. dermatitis
1008. Specify the medical and preventive measures of prevention when working with the laser: A. preliminary and periodic medical examinations, work and rest* B. germetization and adaptation of equipment C. base and rebriefing D. ventilation and lighting work san.enlighting E. the fight with nonspecific factors
1009. What are the legal instruments used to monitor the laser: A. SR 230281, GOST "Laser safety"* B. Construction norms and rules (CNandR) 110 479 C. Sanitary rules and regulations (SRandR) D. order Ministry of health of the Republic of Uzbekistan "On dirgovernmental san. supervision " E. GOST 12.1.00383 "Industrial noise"
1010. Critical organs exposed to laser radiation: A. the eye, the retina, the skin* B. cerebral shell labyrinth C. krovenosnye vessels, liver D. slizistye of the eye, heart, E. zheludok, intestines
1011. Electeragnetic oscillations which are wavelength UV: A. 400200 nm* B. 1 sm1 mm C. 310 mm D. 180 nm to 130 nm E. 760 nm1mm
1012. What groups are divided into UV wavelength: A. short, medium, long (A.B.S)* B. kilometer, meter C. short, ultralong D. deci, centi, mm E. wide, tonal
1013. UV radiation which group has a predominantly local effect on the skin and mucous membranes: A. mediumwave* B. millimetrovye C. ultultravoice hort D. meter E. santimetric
1014. What a sharp prof. The disease occurs exposure to UV radiation: A. elektrooftalmiya* B. sores C. cataract D. blefarospazm E. iridotsiklit
1015. When you perform any of the above work, the highest levels of UV radiation; A. electric welding* B. gaswelding C. photocopying D. contact welding E. electrotype
1016. During conducting electric welding in the assembly shop, two workers of neighboring workplaces presented complaints of sharp pain in the eyes, tearing, photophobia, redness. What is this disease, reason: A. elektrooftalmiya, electric welding jobs without barriers and a lack of personal protective equipment* B. conuktivit, eye contact condensation aerosol C. conuktivit, due to the high brightness of the electric D. seasonal konyuktivit, lipping pollen E. inflammational diseases of heating zaotsutstvie
1017. In what situations may develop lightfast and that is the reason: A. work underground in a room with no natural light, the lack of UV* B. work in night shifts, the lack of brightness C. hot climate, excess infrared radiation D. work in refrigerators, cooling microclimate E. work in the weaving workshops
1018. What disease occurs when UV irradiation is insufficient: A. light fasting* B. hyper insolation C. astenonevrotic syndrome D. hypothermia E. dermatity
1019. What is a nonpermanent noise and which ones are the most dangerous A. fluctuating, intermittent, pulse; the most dangerous pulse* B. unstable ; the most dangerous fluctuating C. unstable ; the most dangerous intermittent D. fluctuating ; the most dangerous tonal E. unstable ; the most dangerous broadband
1020. How does the range of perception of sounds, depending on the age of employees: A. tapers with increasing age* B. not changes a. the high bound of perception is increased C. decreases lower limit of perception D. with increasing age expands
1021. Which class is the noise at a frequency of 300 Hz A. bass* B. middleranged C. highranged D. powerful E. loud
1022. Which class is the noise with frequency 550Hz A. medium* B. highranged C. lowranged D. powerful E. loud
1023. Which class is the noise with a frequency 1500Hz A. high* B. middleranged C. lowranged D. powerful E. loud
1024. What is the frequency of sound is taken as the standard tone? A. 1000 Hz* B. 15000 Hz C. 10000 Hz D. 150 Hz E. 12000 Hz
1025. As classified by the nature of the noise spectrum A. broadband, dial* B. entire oscillating C. tonal, fickle D. short tone, intermittent E. powerful, intermittent
1026. How classed noise temporal characteristics A. fixed, intermittent* B. bouncing, intermittent C. is a constant, highfrequency D. means and sub wood E. is a constant, pulsed
1027. Unstable noise is divided into: A. fluctuating, intermittent, impulsive* B. lowranged, midrange C. averageranged, loud, D. with breaks, voice range E. highranged, intermittent, loud
1028. What equipment is necessary for the complete characterization of industrial noise A. sound level meter, spectrum analyzer, tape* B. galvanometr, voiceisolator, C. VT2, audiometer, HB 1 D. viberetr, tape, audiometer E. baeretr, galvanometer analyzer
1029. Principles of valuation of industrial noise A. type of work, characteristic of the noise levels in octave bands, the time of exposure* B. threshold hearing sensitivity, time of exposure, effects on human C. state CNS hearing, the exposure time D. change in the auditory analyzer, the nature of the noise contributing factors E. impulsive effects on hearing, the exposure time
1030. What should the production san. doctor if the noise exceeds the remote at 5dbl A. write a document indicating the measures to reduce the noise level and to specify the terms* B. hesitate work at the site C. close the company to address the shortcomings D. advice use of MIP E. oblige administration to replace technological equipment
1031. What should the san. doctor if carried out technical and san. technical measures to reduce the noise turned out to be effective: A. ESP organs recommend the mandatory use of hearing and reduction of working hours at the site* B. advice more frequent medical checkup C. a review conduct D. outwit audiometric study E. close company
1032. What is the acceptable level of noise intensity dB: A. 80* B. 100 C. 85 D. 110 E. 95
1033. What it forms the basis of a valuation of noise in dB relative value: A. increase the intensity of sound 10 times the perceived as an increase in volume by 2 times* B. increased the power of sound 10 times perceived by the ear as an increase in volume 5 times C. singlevalued the increase in noise and its perception D. to depending on associated factors E. to direct auditory perception is directly proportional to the power of sound
1034. Which device is used for detecting auditory perception A. audiometer* B. noisemeter 371 C. voiceanlyzator D. fork E. RFTinstrument
1035. To what purpose is conducted audiometry: A. to determine shifts hearing thresholds* B. with the aim of studying the impact of noise on the central nervous system C. to determine the passage of nerve impulses (excitation) through synapses D. the hearts vessel system is an entire study on the effects of noise E. for setting degree of hearing loss
1036. What is the adaptation of the acoustic analyzer: A. decrease in hearing sensitivity is not more than 15 dB, which is restored within 3 minutes after the cessation of exposure to noise* B. decreasing hearing sensitivity by more than 15 dB, which is not restored within 3 minutes C. pereadaptation acoustic analyzer exposed to intense noise D. loss hearing sensitivity at medium and high frequencies E. prompt decrease in hearing sensitivity under the influence of the noise intensity
1037. What is the fatigue of hearing: A. decrease in hearing sensitivity under the influence of the noise by more than 15 dB, which is not restored within 3 minutes after the cessation of exposure to noise* B. decreasing auditory sensitivity under the influence of sound stimulation, which restored 3 minutes after the end of exposure C. pere adaptation acoustic analyzer D. adaptation acoustic analyzer E. decrease in hearing the voice frequency range
1038. What is the increase depending on the intensity of sound and auditory perception: A. log* B. arithmetic C. geometric D. just summation E. back
1039. In the workshop, which employs 12 difent tools, measuring the overall noise level in the first shift. Rate the correct dimensions: A. wrong; requires complete characterization of each workplace* B. wrong; the required level of noise to half of the jobs C. wrong; you must define it in the same place and in the second shift D. all research conducted properly E. the need to simultaneously measure the parameters of the microclimate
1040. In the weaving workshop where 50 installed machines working 20, measured noise levels. Assess the correctness of the measurement: A. wrong with the measurements should be run for at least 2/3 of the equipment* B. a regular, because running more than 10% of the equipment C. a regular, because nearly half of the equipment D. wrong, because at the same time it is necessary to measure vibration and general E. the need to measure the parameters of the microclimate
1041. In view of what features work normalized noise with which the remote control is compared: A. degree of intensity and the severity of the labor, the best* B. duration change; best C. with very hard work; admissible D. with very intense work; admissible E. when working the night shift; admissible
1042. What will be the leading factor in the weaving shop, and that relates to contextual factors: A. noise, vibration, humidity* B. vibration , low temperature C. noise, forced working posture D. significant walking, power of vision E. heaveiness and intensity of work
1043. Workers machine shop showed a reduction in auditory and vibration sensitivity. What instruments were used in this case: A. audiometer vibrotestr* B. noisemeter, actinometer C. camerton, vibrograph D. anemomether, audio analyzer E. NV1 thermometer
1044. What is a hearing loss? A. sustained reduction in hearing sensitivity thresholds* B. prompt decrease in hearing sensitivity at high frequencies C. loss hearing sensitivity at low frequencies D. the total loss of air conduction E. decrease in hearing sensitivity 15dB not recover after rest
1045. What is deafness? A. full loss of hearing sensitivity at all frequencies* B. resistant decrease in hearing sensitivity thresholds C. decrease in hearing sensitivity by 20 dB D. loss hearing sensitivity at frequencies of speech E. prompt decrease in hearing sensitivity under the influence of strong noise
1046. What is the sequence of changes in the body operating under the impact of intense noise: A. adaptation, fatigue, hearing loss, deafness* B. fatigue, hearing loss, change in the central nervous system C. change in the CNS and CVS D. fatigue, hearing loss, decrease the overall health E. decrease in auditory sensitivity, insomnia
1047. Which methods of noise control is the most radical A. reduction at source* B. decrease in the path of propagation C. reduce by applying the antiphons D. systeamtic control over noise levels E. are periodic and preliminary medical checkup
1048. Select the most efficient sequence of health measures to combat noise A. organizational and technical stage of the SPE, sanitation, health and prevention* B. application MIP, medical and preventive C. voice isolation, the use of MIP D. application MIP limit exposure time E. mediko preventive, sound absorption, connecting rod sinks
1049. What is a vibration like prof. harmness? A. mechanical vibrations of elastic bodies, transmitted on direct contact of the body* B. wave formed oscillatory motion propagating in an elastic medium C. electr vibrations of a certain wavelength D. sotryasenie occurs when traffic E. chaotic vibrations of the air environment of a certain frequency and strength
1050. How is classified as a vibration prof. harmnes by the method of transmission to the worker? A. total, the local* B. transportation, technology C. local, technology D. transportation, general, technological E. vibration hand tools
1051. How is classified overall vibration? A. transport, transport and technology, technological* B. vibration horizontal and vertical axes C. vibration workplace controls D. technological, with the application running on your hands E. transportation with vibration controls
1052. What are the indicators characterized the vibration? A. frequency, velocity, acceleration, amplitude* B. the intensity, speed, offset C. break , speed, altitude D. stability, height, intensity E. gerkost, amplitude, intensity
1053. What is the amplitude of the vibration? A. maximum displacement of the vibrating body the point of stable equilibrium* B. surface vibrations arising in transport C. transporttechnological vibration D. noticeable displacement of vibrating surfaces E. is the oscillation acting on the operators of stationary machines
1054. What is the frequency of the vibration? A. the number of oscillations per unit time* B. the number of oscillations per 1 period C. the number of chaotic oscillations for 1 cycle D. the number of oscillations per hour E. summary vibrations per shift
1055. Assess the conditions of work in the assembly shop, if the noise is 95dB, and the carbon monoxide concentration of 40 mg / m3: A. unnecessarily adverse noise exceeds 15 dBa on the remote control and the concentration of CO above the MPC by 2 times* B. unfavorable unnecessarily noise exceeds 25 dBa on the remote control, the CO concentration within the MPC C. favorable , because noise levels and CO meet sanitary standards D. level of noise exceeds the RC and CO within the MPC E. if reduce the noise level, the working conditions are favorable.
1056. .What is velocity: A. offset surface in m/s* B. displacement of the vibrating surface of the point of stable equilibrium C. the time of exposure to vibration D. the speed of the vibrating tool E. changes in vibration acceleration
1057. What is the vibration acceleration: A. offset surface in m/s2* B. displacement of the vibrating surface of the point of stable equilibrium C. the speed of rotation of the elastic tools D. the time of exposure to vibration during shifts E. vibration velocity
1058. The units of measure the frequency of vibrations of elastic bodies: A. Hz* B. m/s C. m/s2 D. pascal E. dB
1059. The units of measure vibration speed: A. m/s dB* B. Hz C. pascal D. m/c2 E. Vt/M2
1060. What are the instruments measure total vibration: A. WIN1* B. dinamografom C. ostsillografom D. noisemeteer E. lucs meter
1061. What you need to know to fully assess the hygienic production of vibration and what the rules are compared: A. Type of vibration, the direction of the axes, the intensity, frequency, time of exposure, permissible* B. the degree of the applied force, the exposure time, the optimal C. direction of the axes, the time of exposure, type of vibration D. action on the body, the ability to trans E. levels associated factors
1062. What organs and systems are affected primarily by the impact of local vibration: A. cardiovascular and peripheral nervous systems* B. central nervous system C. parenchymatic bodies and the vestibular apparatus D. skeletal system E. organs digestive tract
1063. Of these factors, which enhances the effect of vibration on the body: A. low temperature, static force, noise* B. high temperature, static force, ULTRAVOICE C. UV, dynamic forces, noise D. high temperature, noise, UV E. is the chemical factor
1064. What is the range of variation of elastic bodies perceives man as a vibration: A. a fraction of Hz to 8000 Hz* B. 1 to 16,000 Hz C. 120 to 250Hz D. 120 to 250Hz E. 250Hz to 1000Hz
1065. What kind of instrument is determined vibration sensitivity: A. Vibrotester* B. VSHV003 C. ISHV1 D. NOM1 E. MV4M
1066. How to measure vibration sensitivity under the influence of local vibration: A. reduced* B. increases C. not changes D. decreases only under intense vibration E. changes only at presence of confounding factors
1067. Capillaroscopy allows you to: A. detect the first signs of influence to local vibration* B. judge about the direction of the labor process C. judge about the direction of the labor process D. detect impact of industrial noise E. detect evidence of exposure to infultravoice ound
1068. What is the impact on the climate effects of vibration on workers: A. cooling microclimate enhances vibration* B. freezing climate reduces vibration C. heating microclimate enhances vibration D. comfort microclimate enhances vibration E. decreased humidity exacerbates the effects of vibration
1069. Select the most efficient sequence of proposed activities with industrial vibration: A. precautionary sanitary inspection in the design of new equipment, technology tool, sanitation, health and prevention* B. application antiphons, headphones, gloves for vibration damping C. med.preventative work and rest, means of individual protection (MIP), D. vinraisolation, vibromuting E. special nutrition, coaching
1070. In the forest cutters, a vibration effect occurs and what can be done in the first place: A. local, work and rest, the organization of recreational and heating, overalls* B. general, preventive nutrition, massage, heat hydro procedure C. both kinds of shortening the working shift, prof. inspection D. to depending on the type of equipment, special clothing, hot meals E. general, special food, massage
1071. Ultravoiceare mechanical vibrations frequency of air pollution: A. 20 kHz to 109 * B. below 16 Hz C. 100 KHz to 120 KHz D. above 109 Hz E. above 10 13Hz
1072. The units of measure the intensity of the ultultravoice ound: A. dB, w/sm2* B. vol/m C. om D. % E. pascal/sm2
1073. The ultultravoice ound is characterized by: A. intensity, frequency, rate* B. temperature absorbed in the body C. bouncing speed D. is the pressure on contact E. an electric charges in the absorption zone
1074. The units of measure the frequency of the ultultravoice ound: A. Hz* B. Vt/sm2 C. Vt/m2 D. Phaskal E. Th/s2
1075. Ultravoice frequency is divided into: A. highfrequency, low frequency* B. low, medium, high C. ultra high ranged D. low ranged E. over high ranged
1076. How by ultravoice extends a function of frequency: A. airlow frequency, high frequency contact* B. air outdoors C. pin, depending on the distance the source D. to depending on air temperature E. to depending on humidity
1077. What are the effects of the ultultravoice ound used in the application in the production of: A. thermal, mechanical, physical and chemical* B. bordering surfaces C. phagocyting and dissolution D. reflections and reverb E. changes of the physical properties of the object
1078. What is the range of the remote ultultravoice ound propagation by air: A. 80-110 dB* B. 63-74 dB C. above 90 dB D. 80-90 dB E. 110-120 dB
1079. In order to intensify the process used in the SGC: A. ultravoice cleaning, welding, soldering, drilling, cutting* B. with caisson work C. to work at considerable heights D. manufacture of building materials E. for drying products
1080. In order to control and analysis in the production of the ultultravoice ound is applied at: A. ultravoice inspection* B. observing for cooking steel C. control means for transport management D. to air defense forces E. with the automation of the labor process
1081. In medicine, the ultultravoice ound is used to: A. diagnosis and treatment* B. to nontraditional methods of treatment C. with cirrhosis D. with treatment of injuries E. with acute poisoning
1082. Ultravoice in the body harmful effect in the first place has to: A. peripheral and central nervous system* B. parenchyma tic authorities C. tissue breath D. watermineral metabolism E. smelling and flavor analyzer
1083. Radical methods based on their sequence prevention ultravoice is: A. organizational and technical stage of the, sealing, selflocking* B. architectural planning C. medical preventive D. individual, coaching E. san. enlightening work
1084. Which techniques to control ultravoice is most effective: A. reduction at source* B. as pathways C. by use of MIP D. control the intensity E. carrying out of preliminary medical examinations
1085. For medical and preventive measures when working with the ultravoice are? A. introduction microbreaks every 1.5 hours of operation, admission of persons 18 years of age* B. Preliminary medical examinations, massage C. control of the vibration shielding D. favorable microclimate, noise control E. sufficiency of natural light
1086. Infultravoice ound is the mechanical vibrations of air pollution rate: below A. 20 Hz* B. more than 20 kHz C. below 35 Hz D. 300500 Hz E. more than 109 Hz
1087. Sources of infultravoice ound in the production are: A. *services, compressors, reciprocating mechanisms large surface B. sound generator C. generator ultravoice D. stamping machines E. construction works
1088. The units of measure the intensity of the infultravoice ound: A. 1dB* B. Nyuton/m2 C. Hz D. volt E. phones
1089. Infultravoice ound is a side factor, or technological method: A. side factors* B. technological reception C. side and technological method D. to depending on the type of industry E. to depending on the type of work
1090. The infultravoice ound characterized by: A. amplitude, intensity, wavelength, frequency* B. power C. bouncing speed D. acceleration E. electric charged
1091. For a range of air vibrations typical of the highest wavelength: A. infultravoice ound* B. sounds C. ultravoice D. hyper voice E. noise
1092. Infultravoice ound the nature of the spectrum is divided into: A. broadband and harmonious* B. tonal C. temporary and narrowband D. powerful and continuous E. intermittent
1093. By the time characteristics of infultravoice ound is divided into: A. permanent and non* B. admissible and optimal C. tonal D. impulsive E. lowand midrange
1094. Infultravoice ound affects: A. functional state of the auditory vestibular analyzers, CNS and CVS* B. motor function of the stomach C. functional state of the liver D. excreting system E. thermoregulation organism
1095. Can we consider the EHS implications of scientific and technological progress, and why: A. yes, the introduction of equipment with high unit capacity* B. yes implementation of technologybased EPM C. no, technology design flaws D. no, insufficient knowledge of this factor E. yes, the introduction of new databases
1096. Which methods of combating infultravoice ound is effective? A. reduction at source, and the spread* B. application MIP C. systematic control over the level of infultravoice ound D. preliminary and periodic medical examinations E. reduction related factors
1097. Radical measures preventing infultravoice ound with regard to their effectiveness is: A. on the stage of organizational and technical, sealing, protection distance* B. greening, selection of holiday destinations with fencing C. med. preventive D. ESP, work and rest E. sanitary and educational work, measurement of 1 once a quarter
1098. With some of the ranges of mechanical vibrations of the air environment the most difficult to fight: A. infultravoice onic* B. sound C. ultravoice D. noise E. vibration
1099. For a range of air vibrations possible acute effects of lethal and why: A. noise, breaking eardrums* B. UVB, Cavitation effect C. sound, exceeding the threshold of pain D. noise, hearing loss E. рuts gap alveoli
1100. Specify the correct sequence of steps work on the hygienic assessment of chemical factors in the working area: A. learning process, drawing sketch sampling and analysis* B. drawing up a sketch premises, analysis and evaluation of results C. studying of process, analysis of samples during the shift D. selection samples, delivery and analysis, assessment of ventilation E. drawing up a sketch, sampling when the ventilation
1101. Where is the air sampling to determine the chemical: A. on the workplace* B. in three points premises C. source’s selection D. entrance’s to the shop E. about process equipment
1102. What method sampled air at low concentrations of chemicals in the air: A. suction* B. vacuum C. simultaneously D. fillingm air vessels E. photometric
1103. What tools are needed for aspiration sampling method: A. aspirator, sink, absorption instrument* B. vacuum pump, pipette with crane C. capillaries to fill the air, absorber D. swallowing apparatus, filter rheometer E. swallowing medium rider, scales
1104. One shot sampling method is used in the air: A. at high content of substances in the air and the presence of a highly sensitive method for determining* B. necessity analyte concentration in the sample C. small matter content in the air D. with a presence in the air of two substances E. without breaks control of air condition
1105. In any of the above cases it is necessary to determine the content of chemicals in the working area: A. investigation into prof. poisoning* B. the description of the process C. paint examination of construction projects D. with monitoring of construction progress E. by the direction of the administration
1106. How many samples should be selected in each point of the sequence for a reliable sanitary characteristics of chemical factors: A. is not less than 5 samples* B. up to 4 samples C. 1 Sample D. 2 Trial E. 3 Trials
1107. What are counted to determine the frequency of hygienic assessment of chemical factors in the air of industrial premises: A. the degree of danger of chemical substances released into the air* B. features process C. power air pollution D. a character of the work and its duration E. effectively the ventilation
1108. What you need to know the path of isolation of chemical substances the body: A. to diagnosis and the development of preventive measures* B. for pathogenesis therapy C. determination degree of cumulation D. development hygienic regulations E. to determine the volatility
1109. What are the absorption of the medium used for air sampling: A. liquid, solid* B. gasformed and vaporous C. unflying dry D. soluble in water E. soluble in organic substances
1110. To what purpose are used absorption devices: A. to accommodate absorption media* B. for transportirovka trial C. for the storage of air samples D. for analysis of samples E. for cooling samples
1111. Which basic requirement must comply with the methods used in the sanitarychemical analysis of air samples: A. to selectively analytes at 0.5 MAC or less* B. the ability to determine the substances in all environments C. easy reproduced, simplicity D. the ability to identify all substances belonging to the chemical group E. the ability to determine the substances at MPC and higher
1112. The essence of the aspiration method of air sampling: A. *pulling air through the absorption medium capable detain analyte B. filling vessels or units studied air C. precipitation substance on the surface of the absorption devices, slides D. excreting substances the air by drying or volatilization E. concentrating metabolites substances
1113. Specify the main tasks in the industrial toxicology: A. rating and the risk of toxicity of new chemicals, process, development of hygienic regulations and prevention* B. establishing parameters of acute toxicity, hygienic assessment of conditions of use C. development of rational prevention and poisoning antidote therapy D. development and effective use of MIP E. approval the exposure zone
1114. Specify the sequence of steps hygienic regulation of chemicals in the working area: A. development of shoes, MAC, MAC adjustment* B. establishing area of chronic action threshold specific action C. establishing SPZ timeout D. evidence shoes, safety factor and MAC E. evidence MPC SPZ conditions of use
1115. The substances, which have the properties that do not penetrate intact skin and mucous membranes: A. lipid soluble* B. not solubles C. soluble in water D. soluble alkali E. soluble in acids
1116. Which connection it is necessary to give presence to the introduction in the production of: A. toxicity and accumulation moderate or weak* B. toxicity average, cumulation expressed C. solubility weak, persistent substance D. flying weak, persistent substance E. is the mass, dispersion
1117. Which of the following substances are not able to penetrate through the damaged skin A. benzene* B. railway, sodium chloride C. hydrochloric acid D. hydrogen peroxide E. distilled water
1118. MPC is the concentration at which the impact of: A. on throughout the length of service does not occur any changes in the body at the present and future generations* B. on throughout seniority do not develop signs of intoxication C. as for change within 6 hours is not cause specific changes D. develops operating changes integral indicators E. marks pronounced changes sensitive indicators at the end of work
1119. Which of these recreational activities the most radical to eliminate chemical factors: A. improvement process, sealing* B. the device of rational ventilation C. carrying out of medical checkup by order number 200 D. it organizations inhaler fotaries E. providing MIP instruction
1120. When performing any work takes place on the body of the impact of acid employed in electroplating shops: A. removal of oxide etch* B. galvanic floor C. pumper products D. unfatting products E. first products
1121. What are the chemical hazard may be formed in machine shops A. nitrogen oxides, oil mist, carbon monoxide* B. pairs of organic solvents, acids and alkalis pairs C. aerosol condensation irritating gases D. metal silicon containing dust E. pair hydrochloric and sulfuric acids
1122. In the finishing shop before painting of metal products used acid. For what purpose, what is the most dangerous acid and why: A. to remove oxides: nitrogen, the most volatile* B. for degreasing, salt, average volatility C. for priming, sulfuric, little bat D. for hardening, acetic, bat E. to neutralize sulfuric
1123. What are the requirements for the premises, if it is applied metallic mercury: A. first floor, whole flooring, painting walls and ceilings* B. umipr floor, local exhaust mechanical ventilation C. work only in the cold season D. work only in natural light E. work only at artificially illuminated
1124. In some situations, you can enable the use of metallic mercury: A. technological need for full compliance with office space, equipment* B. economic expediency, 1st floor C. completing order number 200, providing MIP D. quantitative briefing E. halfholiday
1125. How often it is necessary to carry out the control, if air enters the substance hazard class 2: A. 1 once a month * B. 2 times in 10 days C. 1 once a quarter D. a continuous control E. when the investigation prof. poisoning
1126. Which MIP should be used when carrying out painting works pulverization method: A. A cartridge respirators, goggles, gloves, uniform* B. glasses, gloves, apron, boots C. antigaze, overalls, gloves D. boots, goggles, overalls E. antibackground, earplugs
1127. What effect has the majority of organic solvents in acute intoxication: A. drug* B. allergic C. cardiotoxic D. bronchospastic E. terathogenic
1128. Which of these chemicals may enhance the toxic effects of carbon monoxide: A. nitrogen oxides* B. pair alkalis C. silica D. pair petrol E. suphurhydrogen
1129. Set of some MIP should be to ensure operating electroplating shops: A. rubber gloves, boots, apron* B. respiratory, overalls, boots C. antigaz, pressurized helmet, apron D. rukavitsy, goggles, helmet E. gloves, helmet, respirator
1130. Which of the following chemical groups. substances are carcinogenic: A. aniline, nickel, asbestos* B. oxide carbon and nitrogen, organophosphorus pesticides C. mercury, silicon, ammonia D. acetone, gasoline, kerosene E. iron, copper, tin
1131. Which of the following groups of substances have pronounced cumulation of material: A. mercury, lead, arsenic* B. organic solvents, organophosphate pesticides C. oxide nitrogen, carbon D. polimer substance and resin E. grey gas hydrogen peroxide
1132. What kind of property associated risk of systemic toxicity of irritating gases and how it manifests itself: A. solubility in water, the smaller it is, the more general toxic effect* B. what greater solubility in water the more dangerous C. what is less dangerous than the local action D. what more local action all the more dangerous E. gen. toxic effect does not depend on the solubility of
1133. What kind of irritant gases can cause instant death: A. hydrogen sulfide, and chlorine* B. nitrous oxide, nitric oxide C. ammonia, chlorine monoxide D. sulfur dioxide, nitrogen oxide E. sulfur and sulfur dioxide
1134. Zone acute effect is determined by the ratio of the value of: A. of the mean concentration of the threshold single exposure* B. minimal of the mean lethal dose and the dose of single exposure C. threshold acute effect of the mean dose to a single exposure D. threshold chronic to the threshold of acute effect E. avaragedangerous the threshold chronic actions
1135. Ratio is the ratio of cumulation: A. mean lethal dose in multiple of the mean dose to a single exposure* B. middlemortal and minimally lethal dose repeated exposure C. values threshold chronic actions of the mean dose to the repeated exposure D. avaragedangerous single exposure dose of the mean for repeated exposure E. values threshold dose single exposure to a dose repeated exposure
1136. In which industries lead can be a leading occupational hazards: A. getting pure metal and printing* B. application of watersoluble paints C. when assembling bearings and vacuum devices D. with gaswelding works and metal etching E. with mining ores and their transportation
1137. When performing any work can take place tetraethyl lead exposure: A. for obtaining and applying TPS ethyl fluid and leaded gasoline* B. with production and use of gasoline C. with test aircraft engines and diesel units D. with lead smelting production of various types of solid fuel E. with production and use of antifreeze and brake fluid
1138. What disease can occur with prolonged exposure to lead: A. Saturnism* B. hyper termiya C. merkurilielizm D. siderosis E. kollagenoz
1139. Which of the solutions used to clean the skin of hands when working with lead: A. 2% acetic acid solution* B. 2% solution of soda C. 0.5% solution of potassium permanganate D. 0.5% solution of sulfuric acid E. warm soap and water
1140. In which state of aggregation of mercury is most dangerous: A. vapor* B. pastoobraznom C. solid D. zhidkom E. zhidkokapelnomaerosole
1141. What disease can cause longterm mercury when it enters the body: A. mercury poisoning* B. saturnism C. bissinoz D. scoliosis E. pneumoconyosis
1142. What are the contributing factors increase toxicity: A. high temperature, CO2* B. low temperature, vibration C. heaviness and intensity of work D. no daylight E. is the chemical factor
1143. In the finishing shop used solvent is not envisaged previously but its known toxicity. Do I have to agree with CSSES its application: A. so sure* B. not necessary C. must do if hazard class 1 D. don't need if it is designed for MAC E. nuzhno if hazard class 2
1144. The laboratory spilled metallic mercury, wooden floor, walls are whitewashed with lime, it is necessary to undertake: A. collect mercury pour remains of ric chloride spend demerkurializatsiyu premises* B. lear underfloor space to provide working MIP C. enable or disable exhaust air extraction D. gather mercury and all the staff spent on medical checkup E. inform the administration and health center
1145. When periodic medical examinations in a number of working eectrowire plant revealed the phenomenon of anemia gray border on the gums constipation perestezii urinescatporfirn. On it also indicates that we must take: A. influence lead to direct for treatment* B. influence mercury re for medical treatment C. influence TES suspended work D. trans for work not related to the hazard E. influence organic solvents provide MIP
1146. How many groups and taking into account that share carcinogens IARC classification: A. three groups according to the degree and probability of carcinogenicity* B. five group localization C. two groups of chemical composition D. two groups of chemical and physical E. or four groups according to the degree of danger
1147. Can you agree with the expression "Every mutagen kantserogen but not everyone is a carcinogen mutagen": A. can be* B. must not C. can only for chemical plants D. can only physical factors E. can but depending on the duration of exposure.
1148. What is the intermittent action of chemicals: A. action intermittently* B. action within 2 weeks C. single exposure with other substances D. ability to provide polytropic impact E. the ability to hit the nervous system
1149. Rate on the basis of what indicators can be judged on the penetration through the intact skin: A. death, the clinic, the content of substances in biological media or excreta* B. dying, skin necrosis, lesions of the mucous, blood C. ding animals, local change D. content of the substance or its metabolites in the skin casts E. violation behavioral response, local inflammation
1150. How should I do if a spill leaded gasoline: A. rinse with pure gasoline, to fill any oxidant* B. redigging ground to protect this place C. provide working MIP, to instruct D. stop work for 3 days E. direct working on medical checkup
1151. What determines the frequency of monitoring of chemical substances in the working area: A. the hazard class* B. related factors C. the type of industrial ventilation D. the concentration of substances in the working area E. the number of emission sources of pollutants
1152. For some of the above symptoms are judged on the availability of local exposure to the chemical: A. change in place of application* B. the presence of metabolites in biological media C. content substances in the blood D. clinics intoxication E. dying animals
1153. Gets whether benzene through the skin and why: A. yes, soluble in lipids and fats* B. yes soluble in water C. yes has electeragnetic properties D. not gets delayed epidermis E. do not penetrate, it has local effect
1154. The dust, which of the above compounds may cause silicosis: A. quartz* B. asbestos C. coal D. tree E. plastic
1155. What is an acute disease of the skin can cause the action of concentrated sulfuric acid: A. chemical burn* B. dystrophy C. atrophy D. dermatitis E. follikulit
1156. How many classes are divided into chemicals by hazard and title: A. 4 extremely, high, moderate and low hazard* B. 3 organic, inorganic, organometallic C. 3 acting through the skin, respiratory and gastrointestinal D. obschetoxic , irritant, sensitizing, dangerous E. 3 mutagenic, and cardiotoxic embryotropic
1157. If any of the above situations may arise chronic poisoning of workers: A. for longterm exposure to substances in concentrations exceeding the MPC* B. in the absence of sanitary engineering recreational activities C. the irregular monitoring of chemicals in the air D. with inefficient treatment plants E. in the absence of MIP and coaching
1158. Teratogenecity this action leads to: A. developmental disorders of body parts and internal organs of offspring* B. a change in the process of maturation of sex cells C. in violation of the cherosome apparatus D. changes in the function of the cardio vascular system E. damage to the nervous system at work
1159. By what indicators will be normalized if the chemical compound of general toxic chronic threshold parameters 12 mg / m3 as the threshold for specificity equal to 20 mg /m3: A. on systemic toxicity* B. by specific C. by skin resorptive D. with taking into account the stability of the substance E. withtaking into account the degree of cumulation
1160. To what class of risk it is necessary to include the substance if one indicator, this one class, two 2 class, even one grade 3, and the third hazard class 4: A. the first class of danger* B. fourth is the class C. second class D. third class E. fifth grade
1161. Specify the main criteria for the risk of developing acute poisoning: A. zone acute, ECC* B. zone chronicle, volatility C. LD50 skin, the degree of cumulation D. the presence of an irritant effect E. the possibility of distant action
1162. Which of these actions should be interpreted as effects on reproductive function: A. embriotronnoe, gonadotroponah* B. carditoxic, hepatotropic C. neyrotropnoe, blastomogenic D. mutagen, allergenic E. fibrogen, carcinogenic
1163. Cumulative properties of the substance is: A. accumulation of substances in the body, or the effect of its impact* B. porazhenie individual organs C. ability substance to metabolize D. ability substances released through the skin E. ability cause longterm effects of the substance
1164. Cumulation is divided into: A. material, functional* B. acute, chronic C. chemical, physical D. hidden, clear E. local, general
1165. What is a material cumulative effect: A. accumulation of the substance and its metabolites in the body* B. the accumulation of substances in the bodies of lipidrich C. cumulative effect of exposure D. the circulation of substances in the blood E. accumulation of the substance in liver
1166. What is the cumulation function: A. accumulation effect of exposure in the body* B. release of a substance in the body C. accumulation of substances in the body D. violation of embryonic development E. the occurrence of aberrations in cells
1167. How indicator assesses the severity of cumulative properties: A. factor accumulation* B. skin and oral factor C. the ESP of the zone of acute exposure D. the degree of liver damage E. the value of the mean lethal dose
1168. How do you calculate the coefficient of cumulation: A. ratio LD50 LD50 acute accent to the chronicle* B. the ratio of LD50 to LD50 C. the ratio LD50 LD50 skin to the mouth D. the availability threshold for acute chronic effect E. the ratio of areas of acute and chronic action
1169. Cumulative properties of the chemical being studied by: A. introduction of small doses of substances in chronic experiments* B. administering a threshold doses C. the study of the content of substances in the internal organs D. determination of the release rate of the substance the body E. determination of threshold chronic actions
1170. Which of the following measures are considered to be the most radical in the prevention of prof. poisoning: A. replacement of toxic substances to less toxic* B. ventilation device C. conducting medical examinations by order №200 D. sealing equipment E. control of the content of the work area substance in he air
1171. Which of the MIP effective when working with organic solvents: A. respirator mark "A" mask* B. antiaerosol C. respirators brand "G" D. antidust E. cottongauze bandage
1172. When implementing any of the above activities exclude the possibility of exposure to chemicals at work: A. remote control* B. integrated mechanization C. ventilation D. provision of mip E. not continuity process
1173. Which coating should have walls and ceiling in the room where the works with metallic mercury: A. oil or enamel paint* B. lime whitewash C. glued wallpaper D. wood E. any cover
1174. Which of the compounds used in the disinfection of the premises of mercury: A. HCl manganese oxide, ric chloride* B. hydrochloric acid, sodium hypo C. caustic soda, sodium chloride D. acetic acid, carbonic soda E. kerosene, industrial oils
1175. How often you need to check that the chemical content of 2 hazard class clean room: A. is not less than 1 time per month* B. 1 time per quarter C. 2 times in two months D. twice a year E. if necessary,
1176. How often is conducted control over the content in the working area of chemical substances class 3 and 4: A. is not less than 1 time per quarter* B. if workers' complaints C. regular monitoring is not carried out D. control is carried out, if necessary, E. a change process
1177. What are the stages includes chemical analysis of chemical substances in the working area: A. air sampling, extraction of the analyte the sample and its quantitative definition* B. the study process, analysis, evaluation results teachings C. analysis of samples, leaving the conclusion, development measures D. abandonment of the sketch, sampling, measurement of the performance of ventilation E. the choice of the selection method, the analysis of the sample preparation protocol
1178. How should the doctor do Hygienists detection of excess hazardous chemical substances on the development of acute poisoning: A. finished material for making the decision closing the object* B. preparation of documents for administrative penalties C. makes recommendations to eliminate the causes D. ascertain the reasons for this situation, E. determines the effectiveness of the ventilation
1179. By foreseeing the sanitary chemical studies on the production facilities: A. sanitary hygienic laboratories CSSES* B. head of the department of occupational health C. head of the medical division D. department of safety E. administration of production
1180. Who is the conclusion of the protocol analysis of chemical substances in the air of industrial premises: A. doctor of occupational health CSSES* B. principal sanitary hygienic laboratories C. chemic analyst D. engineer safety E. principal health department
1181. At the same time the content in the air a few chemicals of difent directions of action, evaluation of chemical composition of air is primarily: A. on the most toxic substances* B. on the substance with the highest content in the sample C. by most persistent substance D. by penetrating through the skin E. by dissolved in the body's biological media
1182. What is the area of skin exposed areas of the body decided to take swabs to determine the chemical: A. 10x10 sm2* B. 10x5 cm2 C. 10x15 sm2 D. 10x20 sm2 E. 5x5 cm2
1183. How many times per shift swabs taken the skin of the hands and with the technological equipment in the sanitarychemical control in the production of: A. 2* B. 1 C. 3 D. 4 E. 5
1184. At what time of the day you need to take swabs the skin of hands working to determine the extent of contamination by chemicals: A. 1 hour after the start and at the end of work shift* B. in the beginning, middle and end of the shift C. in the middle shift D. at a convenient time E. at the end of the shift, after a shower
1185. What liquid should be used for flushing the skin with chemical arms: A. dissolving the desired substance, harmless to the body* B. volatile, well clear C. not penetrate into the body D. evaporates easily E. entering into a chemical reaction with substances in this group
1186. Which of these metals are carcinogenic: A. chere* B. iron C. copper D. gold E. silver
1187. Which of the following compounds are carcinogenic: A. aeratic amines* B. sulfur compounds C. ammonia D. alkalis E. acetic acid
1188. Carbon monoxide entering the body first comes into compounds: A. hemoglobin* B. methemoglobin C. leukocytes D. blood sugar E. protein compounds
1189. What kind of disease occurs when exposed to aerosols of disintegration: A. pneumoconiosis* B. saturnism C. decompression sickness D. comet E. endocarditis
1190. What is the system of the body is affected most significantly when lead poisoning: A. nervous* B. endocrine C. cardio vascular D. gastrointestinal tract
1191. Which of the methods most often used to detect cancercausing factors: A. experimental, epidemiologic* B. hygiene, physiological C. mathematics, engineering D. a biological, natural E. chemical, anamnestic
1192. What is a carcinogen formed by the transport and is contained in the exhaust gases: A. benzopyrene* B. hydrogen sulphide C. nitrogen oxides D. formaldehyde E. PVC
1193. What depends on the severity of the properties of irritating gases: A. degree of solubility in water* B. partial pressure in the lungs C. velocity of discharge the body D. solubility in fats E. distribution in the body
1194. What part of production facilities accumulated gasoline vapors: A. tenderly* B. overhead C. in the middle D. window’s openings E. everywhere
1195. When it is necessary to carry out continuous monitoring of chemical substances in the working area: A. for admission to the air of substances with high gain mode of action* B. with frequent violations of technological regulations C. with the presence in the premises of the difficult process equipment D. with income of air pollutants difently directed action a. at appearances of cases of the sharp poisonings of workings
1196. What comes into the compound and carbon monoxide to form: A. hemoglobin, carboxyhemoglobin* B. hemoglobin, methemoglobin C. protein compounds albuminates D. lipids and phosphates E. carbons sucrose
1197. Give the definition of "biological factor": A. factor affecting the result of reproduction or the production of biologically active substances of natural or artificial conditions* B. influence related pollution clean air C. influence related to water pollution D. is a biologically active substance E. is the combined effect of several factors
1198. What objects are biological factors: A. bacteria microorganisms and their metabolic products* B. chemical pesticides C. aerosoli mixed composition D. efirnye oils, aeratics E. synthetic peritiroidy
1199. What groups are divided into biological factor: A. the natural and industrial* B. homogeneous and complex C. constants D. temporary E. dissemination
1200. What kind of health survey divided on controlled objects: A. control, not planned and collective survey B. single, general and periodic inspection C. plan, indepth, checking and thematic survey* D. incremental, preventive and targeted surveys E. reusable and disposable examination
1201. How often physicians in occupational health survey carried out indepth health: A. 1 every 4 years* B. quarterly C. 2 times per year D. as needed E. on the instructions of the parent bodies
1202. What kind of data are needed on occupational health physician for the compilation "Plantask": A. flow chart of the production process* B. the indepth health survey C. the general plan, individual departments and sections D. results health screening examinations E. materials of preliminary medical examinations
1203. Who outlines the factors of production in terms of measurements on the sketch: A. doctor CSSES hygienists* B. safety engineer C. head of the sanitaryhygienic laboratory D. foreman E. head of the health department
1204. The main tasks of occupational health: A. hygienic assessment of technical reequipment of industry and agriculture* B. elimination of occupational diseases, occupational poisoning C. the fight against noise, vibration and ultraviolet radiation (uvr) D. to create optimal working conditions, reduce morbidity, increased productivity E. hygienic assessment of new substances chemical and biological origin
1205. What the components of the act of profound health survey: A. passport part, conclusion and terms of use B. narrative states proposals measurement protocols C. recital, opinions, legal, plantask D. the descriptive part, the graphics, the final, deadlines E. passport part, notes, opinions, suggestions*
1206. Who is entitled to make the diagnosis of chronic prof. disease: A. center for professional pathology, department of occupational diseases* B. medical emergency and first aid C. specialist doctor of the central district hospital D. doctor medical unit E. guild therapist GP
1207. In what terms is made to investigate cases of acute and chronic A. within 48 hours and 3 days B. to 48 hours and 10 days C. as for 72 hours and 5 days D. receives notice of prof. diseases E. 24 hours and 7 days*
1208. For a definitive diagnosis of occupational diseases should be taken into account: A. hygienic characteristics of working conditions* B. the results of the preliminary medical checkup C. the results of the periodic medical checkup D. conducting introductory and repeated briefings E. the availability of personal protective equipment and clothing
1209. What is the deadline to conduct investigations of cases of chronic prof. poisoning and prof. disease: A. for 7 days* B. within 2 days C. within 4 days D. for 3 days E. within one month
1210. The diagnosis of acute lead prof. poisoning posed an emergency room physician, without clarifying the circumstances of poisoning, in a notice sent by CSSES day. Assess the situation: A. for 12 hours, the doctor did the right thing* B. you need to find a profession and place of work, notify CSSES C. the doctor had no right to make the diagnosis of prof. poisoning D. for diagnosis need advice prof. pathologist E. notice sent in a timely manner CSSES
1211. What documentation is made in the investigation of prof. poisoning and disease, and in accordance with any document: A. act of investigation, MoH of Uzbekistan №200* B. act of investigation in order №700 C. sanitary protocol of violation of the form №309/y D. the decision to impose a fine in the form №310/y E. a proposal for suspension work aimed at VTEK
1212. When periodic medical examination of a number of timber cutters phenomenon revealed vasospasm lower extremities, acrocyanosis, reducing the temperature of the skin feet and hands. How would you describe this state: A. lack of exercise B. fatigue C. hypothermia* D. hyperthermia E. asthenic syndere
1213. What is aeration: A. organized and managed natural ventilation* B. it is the natural ventilation through windows and doors C. the thermal air curtains D. trans outside air into the room E. use remote air in order to save
1214. What is the performance of ventilation: A. volume of air supplied to or removed the room in m3/h* B. the velocity of air flow inside the duct C. meet the physical condition of the air hygiene requirements D. physical condition the supply air E. The degree of purification of air before being discharged into the atmosphere
1215. How to evaluate the effectiveness of the designed local exhaust mechanical ventilation: A. on the speed of the suction port and exhaust ventilation* B. count by the formula C. by sanitary standards D. count air balance E. by analyzing air pollution
1216. What type of cover local exhaust ventilation is most effective: A. hood* B. bort pumps are C. vent umbrella D. vent panel E. leather
1217. What is the balance of the air: A. the number of fresh air equal to the amount removed* B. is the number of fresh air in less than deleted C. is the number of fresh air over the deleted D. is the temperature of exhaust air is an intake air temperature E. moisturecontent in the supply and exhaust air are equally
1218. What is the total projected supply air: A. to dilute the remaining hazards in the shop and compensation venting* B. to create the optimal temperature C. to deal with excess moisture D. for technological purposes E. for central heating
1219. What is the purpose of industrial ventilation hygiene items: A. for controlling excess heat and moisture, noxious vapors, gases and dust* B. capture and recycling of valuable waste products C. ensuring the optimal course of the process D. to prevent accidents and their liquidation E. construction of air showers
1220. How to evaluate the performance of ventilation for health inspection of ventilation projects: A. proper alignment places air inlet and outlet* B. by checking calculations and comparisons with the data specified in the project C. comparing performance data with hygiene standards D. determination effectiveness of the ventilation E. comparing with the speed of the air inside and outside the premises
1221. What is the task of the doctor of occupational health inspection at the project of ventilation: A. to establish the possibility of providing ventilation air condition meets hygiene requirements* B. check designed the ventilation device all hazardous work sites C. get acquinted technical characteristics vent. agregatov D. count air exchange in the workshop and the presence of air balance E. check the correct location of air ducts in the shop and the air intake.
1222. What is the recommended ventilation to combat the harmful vapors and gases: A. mechanical local exhaust and general forced ventilation* B. general exchange, air curtains C. place ventilation and general ventilation D. airshowering, air curtains E. aeration, air curtains
1223. What are the main measures to protect the environment should be provided in the construction of ginneries: A. sufficiency of the SPZ, cleaning ventilation air* B. equipping cleaning air gases C. clearing construction for the chemical treatment of water D. measurement to reduce dust in the air of industrial premises E. special rooms for dedusting overalls
1224. Specify the sequence of the doctor CSSES during PSN for industrial ventilation: A. sanitary examination of projects, control of construction progress, performance evaluation while taking into operation* B. assessment proper organization of the ventilation system and its effectiveness C. control over the timeliness of construction of all parts of the ventilation system D. assessment productivity and efficiency of ventilation after installation E. gigienicheskaya evaluation of physical and chemical composition of the air
1225. Specify the correct sequence of the values of ventilation among the listed measures to improve the physical condition and chemical composition of the air of industrial premises: A. automation, insulation, sealing, ventilation* B. ventilation, sealing, automation, insulation C. germetization , insulation, ventilation, automation D. insulated, ventilation, sealing, automation E. automate, ventilation, insulation, sealing
1226. What a sharp prof. disease arises the effects of UV radiation: A. elektrooftalmiya* B. sores C. cataract D. blefarospazm E. iridotsiklit
1227. What is involved in the production of pesticides classification: A. object destination* B. stability C. mode of application D. state of aggregation E. solubility
1228. Term (years) in which the pesticide is highly resistant to the substances: A. over 2 years* B. 7 years C. 1 year D. 0,51 year E. 10 years old
1229. What are the stages of work with pesticides should be used MIP: A. all* B. on 1 step C. on stage 2 D. on stage 3 E. with the use of pesticides 1 and 2 hazard class
1230. Entomophages is: A. beneficial insects that destroy pests* B. vampire insects C. are the natural, biological active substances D. insects in the larval stage E. are any insects that breed in artificial conditions
1231. Who is responsible for fulfilling all requirements and regulations of the use of pesticides: A. manufacturer of agricultural products* B. manufacturer pesticides C. CSSES D. nature saving authorities E. face that gave san. summary
1232. Who provides the working MIP: A. administration of the enterprise* B. paintepidemiological service C. pofuse organization D. leader E. acquires himself
1233. Types of ventilation driving force: A. mechanical, natural* B. general, spot C. turbine exhaust D. air showering E. GEN exchange
1234. Ventilation at the place of action: A. total, the local* B. mechanical, natural, combined C. turbine, exhaust, penetrating D. aire curtain air showers E. airation, side suction hood
1235. What is the main task of the doctor in occupational health in the hygienic assessment of industrial ventilation: A. rating efficiency* B. determination performance C. determination ventilation rate D. evaluation of the effectiveness of treatment facilities E. assessment correct placement of ducts
1236. Effective ventilation is: A. ventilation gig. air parameters* B. is the volume of air supplied to or removed the premises C. hermetic ducts in the shop and the location of speed D. the velocity of air flow in the duct E. physical condition of supply and exhaust air
1237. Can I use recirculated air in the shop, where the leading factor is a chemical submitted materials 2 and 3 classes of danger: A. may not be* B. can C. only in the cold season D. can not more than 50% of the time E. only in the beginning of the shift
1238. Timing control of general ventilation: A. 1 once every 3 years* B. 1 once a year C. 2 times per year D. each quarter E. with a planned inspection
1239. What equipment is needed to determine the performance of ventilation: A. miceranometer TsAGI pneumometric tube anemometer* B. reometr baereter C. electric aspirator rheometer D. aspirator "Aera" baereter E. pylesos, anemometer
1240. To what preventive measures include ventilation: A. sanitary* B. technology and technology C. medikoprevention D. medikobiological E. organisational methodological
1241. Specify the correct sequence of steps in the process to cotton: A. application of herbicides and tilizers, plowing, sowing, care of plants, preparation for harvest, harvesting* B. care of plants, preparation and harvesting C. preparation of the soil, sowing, watering plants, preparation and harvesting D. preparation seeds, pesticide, sowing, harvesting E. planting, thinning, harvesting
1242. Complex which factors can affect the body mechanics during plowing: A. noise, vibration, dust, subnormal temperature, exhaust fumes* B. pestitsids, tilizers, forced posture C. infre red radiation, noise, high temperature D. forced posture heating microclimate, noise E. vibration exhaust gases, dust
1243. Which of the work in the cotton can be performed with the use of manual labor: A. thinning, watering, chasing* B. seeding, harrowing, defoliation C. tilizers, pesticides, seed treatment D. preparation fields for mechanized harvesting E. preparation seeds, organic tilizers
1244. What is the hygienic feature of the use of pesticides in cotton: A. application of a large number and variety of pesticides, large areas sequentially* B. application pesticides one appointment to the small areas under special indications C. required pesticide at all stages in various formulations D. no consistency of application, the presence of various forms and methods of making E. use granules and capsules
1245. Which of the following are the most effective measures to reduce the dust content of the working area of machine: A. sealed cabins, ventilation* B. ventilation cabins C. respirator "petal" D. decrease in air temperature E. increase the air velocity
1246. In a working position is carried out handchasing cotton: A. standing with trunk bent* B. sitting on squatting C. in halfbent position D. stowe and sitting E. to bent
1247. At what method of treatment of cotton pesticides is much more polluted the external environment: A. aviation* B. rantsevym C. tractor D. on horsedrawn E. manual processing
1248. Process steps in the cotton gin plant, where the leading factor in the dust: A. cleaning raw cotton impurities, the separation of fibers and lint the seed* B. separated cotton fiber cotton linters and cleaning C. collate cotton and compact D. neutralize cottonseed and purification E. separated cotton variety, pressing
1249. Specify to priority health activities in the main shops ginning plant: A. dust control* B. the fight with vibration C. the fight with a chemical factor D. decrease in the risk of accidents E. providing optimal microclimate
1250. Which of these activities are most effective for dust control in cleaning shops ginning plant: A. sealing, local exhaust and general ventilation is* B. increase performance ventilation C. providing working MIP D. the device of specialized domestic premises E. compliance regulation process
1251. Action any production factors on an organism working there in the drying shop ginning plant: A. dust, excessive heat* B. is a variable climate, low light C. vibration, humidity D. physical voltage E. EMF, chemicals
1252. What are the priority recreational activities should be carried out in the drying shops ginneries: A. struggle with excess heat and dust* B. prophylaxy toxic pesticides C. the fight with electeragnetic fields D. the fight with noise and vibration E. the fight injuries
1253. What is the cause of pustular skin diseases in working ginneries: A. mikrotravmatizm, untimely handling, dust* B. action of pesticides and tilizers in the composition of the dust C. work unprotected skin D. unmatching domestic premises E. no inhalers, health centers
1254. What are the main measures to protect the environment should be provided in the construction of ginneries: A. sufficiency of the SPZ, the complex treatment facilities to clean ventilation air* B. equipping cleaning air gases C. clearing facilities for chemical treatment of water D. measurement to reduce dust in the air of industrial premises E. special rooms dedusting the uniform
1255. The diagnosis of acute lead poisoning posed a professional ambulance doctor, without clarifying the circumstances of poisoning, in a notice sent by CSSES day. Is the doctor did? A. doctor did the right thing, but in the CSSES notice had to be submitted not later than within 12 hours* B. the doctor had no right to make the diagnosis of prof. poisoning C. for diagnosis need advice prof. Pathologist D. CSSES sent notice in a timely manner E. notice must be sent within 24 hours
1256. In what terms is made to investigate cases of acute occupational poisoning? A. 24 hours* B. 48 hours C. for 3 days D. 12 hours E. receives notice of prof. disease F. for 2 days
1257. For a definitive diagnosis of prof. poisoning, it is necessary to take into account? A. hygienic characteristics of working conditions* B. the results of the preliminary medical checkup C. the results of the periodic medical checkup D. conducting introductory and repeated briefings E. the availability of personal protective equipment and clothing F. to instruct
1258. Working thermal management addressed in the medical health center complaining of fatigue, thirst, cramps in the legs, feeling the heat. What is the preliminary diagnosis can be assumed? A. hyperthermia* B. hypothermia C. hypodynamic disorder D. fatigue E. SARS F. cyanosis
1259. What type of local ventilation is most effective? A. pumps are on board B. exhaust hood C. pull out drobe D. housing E. air whowering* F. general exchange ventilation
1260. The laboratory spilled metallic mercury, wooden floor, walls are whitewashed with lime. What should be done? A. collect mercury, pour the remains of ric chloride, hold demurcurization premises* B. a clear sex space, to provide working MIP C. enable and disable the exhaust air extraction D. to collect mercury, and the entire staff spent on medical checkup E. report on the administration and health center F. report safety engineer
1261. What are the requirements for the premises, if it will apply the metallic mercury? A. 1 floors, ground floor covering* B. top floor, local exhaust mechanical ventilation C. work only in the cold season D. work only in natural light E. aeration device, air curtains
1262. The mainly determined by exposure to aerosols mainly fibrogenic action: A. content of crystalline silica* B. high solubility in water C. low solubility in water D. electrchargedyu E. weak phagocytosis
1263. What is the most serious occupational disease causes the dust: A. pneumoconiosis* B. laryngotracheitis C. glossitis D. rhinitis E. gastritis
1264. Which of the following organs most sensitive to fibrogenic dust: A. easy* B. liver C. the bodies of D. hearing E. gastrointestinal tract
1265. What a sharp prof. disease arises the effects of UV radiation: A. elektrooftalmiya* B. colic C. cataract D. blepharospasm E. iridotsyklit
1266. What mostly affects the frequency of incidence of people working in manufacturing: A. production and trade conditions* B. age workers C. total experience D. the state of health care E. family living conditions
1267. The incidence is estimated to morbidity with temporary incapacity: A. on a scale Notkina* B. the level of growth in the overall incidence of C. to reduce the incidence of disability D. to increase the number of days of disability E. by determining the reliability of the translations morbidity
1268. Who should undergo preliminary medical checkup: A. mark all coming to work under harmful and dangerous working conditions* B. all coming to work on this production C. persons under 18 years of age D. persons older than 55 years E. group III with disabilities
1269. Who should undergo periodic medical checkup: A. teens* B. with experience of over 5 years C. workers, consisting on the dispensary D. longterm and frequently ill persons E. the same work, which provided preliminary medical checkup
1270. When periodic medical checkupe a number of radioelectronic industry workers marked: sleep disturbance, hypotension, bradycardia, decreased vision. What this indicates, and what you should do: A. development of the disease on the radio, direct patient treatment* B. treatment asthenovegetative syndrome, change profession C. the development of fatigue, give an extraordinary paid leave D. to establish the diagnosis investigate working conditions E. the defeat of the hypothalamus, suspended work
1271. When carrying out electric welding in the assembly shop, two workers of neighboring workplaces presented complaints of sharp pain in the eyes, tearing, photophobia, redness. What is this disease, reason: A. elektroftalmiya, electric fences without jobs and lack of personal protective equipment* B. conyunktivit, eye contact condensation aerosols C. conyunktivit, due to the high brightness of the electric D. seasonal conyunktivit influence pollen E. respiratory diseases due to lack of heating
1272. In what situations may develop lightfast and that is the reason: A. work underground, indoors bases natural light* B. night work, the lack of brightness C. hot climate, excess infrared radiation D. work in refrigeration, cooling microclimate E. operation, fatigue.
1273. Types of industrial lighting: A. artificial, natural, combined* B. side, top, combined C. lyuminestsent, incandescent D. emergency on duty, working E. general, combined, top
1274. What is the illumination of: A. surface density of luminous flux* B. light flux reflected the surface C. the density of the luminous flux in the space D. part of radiant energy, causing light sensation in the eye E. light flux reflected the surface towards the eye
1275. What are the regulations of the sanitary doctor uses when assessing lighting in the production of: A. Construction norms and rules (CNandR) 2.04.0598* B. SN 275 71 C. GOST12.1.00588 D. Sanitary rules (SN) 408886 E. SN 322385
1276. Which indicators normalized combined lighting: A. the coefficients of natural light (CNL)* B. luxury C. lumen D. bit/sec E. kandela
1277. What is the local coverage: A. illumination, concentrating the light flux in the workplace* B. enlightening to continue with the emergency shutdown C. enlightening after hours D. enlightening premises natural and artificial light E. enlightening for evacuation
1278. What is the combined lighting: A. illumination at which light enters through lightaccepting in exterior walls* B. matching top and side lighting C. matching natural and artificial lighting D. enlightening , wherein the total coverage of the local accrue E. duty and emergency lighting
1279. How to classify the lamps on the distribution of luminous flux: A. direct, diffuse and reflected light* B. close, open, direct lighting C. humidprotected, dustproof fixtures D. aggressive environments, general lighting E. local combined lamps
1280. Which document sets out the norms of illumination: A. Construction norms and rules (CNandR) 2.04.0598* B. GOST 12.1.00588 C. GOST 12.1.00883 D. Order of the Ministry of Health of the Republic of Uzbekistan number 200 E. Sanitary rules and regulations (SRandR) 020306
1281. Which calculation methods most frequently used in the examination of projects for industrial lighting illumination determination: A. point method* B. method of luxmeter C. method of utilization D. on the scale of comparison E. the method of Watt
1282. What method of counting the illumination of emergency lighting: A. point or method of Watt* B. method of linear isolux C. instrumental method D. the method of utilization E. by calculating the total power
1283. What percentage should be illumination lamps in the general lighting combined light: A. 5% of the total lighting standards* B. 0,5% of the norm C. 10% norm for the combined illumination D. 12% of the norm E. not more than 300 lux on the working surface
1284. What types of water use may be on the production site: A. household and drinking water consumption, technological water consumption* B. for technical purposes and irrigation C. dining and living rooms D. firefighting, antidust E. irrigation areas and green spaces
1285. What is the domestic space is created for the prevention of light starvation: A. fotaries* B. inhaler C. sunbathing D. hand and foot baths E. psychological relief
1286. The grid is determined by the number of showers and washrooms cranes: A. number of employed persons in the most numerous change* B. number of employees in two adjacent shifts C. the total number of employed persons D. calculated net 1 for 10 workers E. calculated according to the number of working women
1287. What kind of lighting should necessarily be provided in domestic premises, regardless of the number of shifts: A. artificial lighting* B. natural light C. combined lighting D. local lighting E. natural, side lighting
1288. What determines the choice of a light source and type of fixtures: A. nature of the work, atmospheric conditions, ESP of the room and the level of normalized illumination* B. special requirements definition, color, reflectance C. singularities work and painting facilities and equipment D. get costeffective light source spectral composition E. technological process and light direction
1289. What is the purpose of lighting fixtures: A. redistribution of the luminous flux, to protect the eyes glare* B. protection eyes of gases and vapors C. increase the light output lamps, dimming D. protection of workers electrical shocks E. increase efficiency lamps, validity
1290. For what purposes in the calculation of the projectedlight safety factor is introduced: A. to compensate for the reduction of air pollution in the lighting and operation of fixtures* B. for the value of minimum illumination C. taking into account the aging of the lamps as their operation and burnout D. to determine the specific wattage E. to determine the relative illumination of all types of lighting
1291. Which requires mandatory projecting production of natural lighting: A. taking into account the positive economic, biological, psychological value* B. to may have been carrying out work only with the spectrum of light C. reduction occupational poisoning in manufacturing D. create a constant level of lighting in the workplace E. reduction number of persons employed in the operation of lighting installations
1292. Composition depends on domestic premises: A. on the characteristics of the process and harmful factors* B. the number of employees and number of shifts C. adverse weather conditions D. intense radiation and heat effects E. intense exposure to dust, vibration and EMF
1293. The number of lockers to store clothes closets depends: A. the number of workers in the two most numerous shifts B. the number of employed persons in the most numerous change C. the number of persons employed in the day shift D. the total number of employees in all shifts* E. the technological process and industrial hazards
1294. What is the purpose in the manufacture of organized industrial ventilation: A. *for controlling excess heat, to control vapor, gases and dust B. capture and recycling of valuable waste products C. for prevention of emergency situations and liquidation D. equipping air curtains at the entrance to the shop E. to reduce heat F. to reduce the incidence
1295. The terms used for the titles of occupational lead: A. saturnism, microsaturnizm * B. bissinoz allergy C. pnevmokonioz, bronchitis D. bronchial asthma, pneumonia E. dermatitis, byssinosis
1296. What determines the composition of the domestic premises: A. features and process hazards * B. are the numbers of employees and number of shifts C. infavorable weather conditions D. intense radiation and heat effects E. intense exposure to dust, vibration and EMF
1297. The number of individual lockers for storing clothes in closets depends: A. the number of working in the most numerous change * B. the number of employees in the 2 most numerous shifts C. the total number of employees in all shifts D. the number of working the day shift E. the technological process and the hazards
1298. The action of the local vibration, which facilities must be provided in the construction of: A. gidroprotsedury and self massage * B. psychological unloading C. fotaries D. prof. feeding E. neutralize MIP
1299. When provided emergency lighting: A. if rejecting working lights there is a danger of explosions, fires, poisonings, infringements of technological equipment* B. if there are only natural light C. for evacuate people the premises D. with low light work lights E. for the protection of the object in the night
1300. The definition of stability factor of clear vision: A. time clear vision in seconds B. ratio of the clear vision to the entire experience of time, expressed in %* C. time obscure vision in seconds D. ability eye to a sustainable vision of the subject E. time adaptation to light level
1301. What is the capacity of the visual analyzer, unit: A. the maximum speed with which the optic analyzer transmits information per unit time, bits/sec* B. the velocity of handeye reaction, sec C. ability eye to distinguish objects, s D. adaptation to difent levels of illumination E. a minimal amount of time necessary to distinguish work sec
1302. Which of the following deficiencies characteristic of incandescent lamps: A. low efficiency, unlike the spectrum of natural light* B. with operation often ripple C. lamp flow depends on the ambient temperature D. when you change the composition of air varies intensity E. impossible used as a heat source
1303. Specify the advantages of coefficient of performance lamps: A. spectral composition is close to natural light, large light output, economical * B. is the temperature of the environment does not affect the operation of lamps C. it can operate in any environment without lighting equipment D. perhaps any change in the luminous flux without lighting equipment E. decrease in voltage has no effect on the intensity of light
1304. Which unit normalized combined lighting: A. % * B. luxury C. lumen D. kandella E. bit/sec
1305. Which unit normalized artificial light: A. suite * B. % C. lumen D. kandella E. bit/sec
1306. Which unit normalized natural light: A. % * B. luxury C. lumen D. kandella E. bit/sec
1307. What is the brightness: A. spatial density of light reflected the surface to the direction of flow to the eye, cd/m2* B. cardinality of radiant energy, which causes the eye light feeling, lux C. superficial density of luminous flux, cd D. is the ratio of luminous flux reflected a surface to that incident on a reflection coefficient E. space risk of luminous flux, cd
1308. What is the coefficient of natural illumination (CNI): A. ratio of illumination of the working surface to the lighting outside the building in%* B. the ratio of floor space and the area of the windows C. the ratio of the area of the windows in the area of windows D. the ratio of the illumination of the working surface to the lighting in the aisles E. light suites, created by a natural source of light on the work surfaces
1309. What is the coefficient of natural illumination normalized with unilateral lateral natural lighting: A. the minimum on the working surface* B. average on working surface C. coefficient of natural illumination is the value in the middle of the room D. coefficient of natural illumination is the value in the aisles E. maximal on the work surface
1310. What is the coefficient of natural illumination (CNI) normalized with unilateral lateral natural lighting: A. averaged at points on the working surface at a distance of 1 m the surface of walls and partitions* B. minimal at 1 m the wall C. maximal at a distance of 2 m the walls D. the average middle of the room E. coefficient of natural illumination (CNI) is the value at the most distant point of the room
1311. Background lightness which is included in the standardization of lighting on the working light: A. light, medium, dark* B. large, small C. the mean, light, light D. small, dark, light E. bright, big, small
1312. Background considered in the light reflectance: A. 40%* B. up to 60% C. up to 100% D. less 20% E. over 30%
1313. The contultravoice t with the background of the object of discrimination in the rules dif: A. large, medium, small* B. bright, big, small C. small, light, large D. bright, dark, light E. large, medium, bright
1314. The contultravoice t with the background of the object of discrimination is considered large if: A. value of 50%* B. values of more than 20% C. value of less than 20% D. is the value equal to 40% E. is the value of 50%
1315. The contultravoice t with the background of the object of discrimination is considered to be in the middle: A. values and 20%* B. value of 20 to 50% C. values and 10% D. is the value to 15% E. is the value of 15%
1316. The contultravoice t with the background of the object of discrimination is considered to be small at: A. values of more than 20%* B. values of 40% to 50% C. value of less than *20% D. values and 50% E. is the value to 40%
1317. What determines the choice of light sources and luminaires type: A. nature of the work, environmental conditions and the level of normalized illumination* B. special requirements and painting facilities and equipment C. get costeffective light source D. technological process E. special requirements definition, color, reflectance
1318. When the sanitary inspection work is related to the precision associated with the consideration of colors. What is the source of light and lighting systems the most rational: A. fluorescent lamps combined system* B. lampy incandescent localized system C. it is the natural light, onesided D. lampy bulbs, the total system E. emergency and evacuation lighting
1319. What is the most difficult occupational disease causes dust: A. pneumoconiosis* B. laringotraheit C. glossitis D. rhinitis E. pharyngitis
1320. Which of the following organs most sensitive to fibrogenic dust: A. easy* B. liver C. organs view D. organs hearing E. GIT
1321. Who should undergo preliminary medical checkup: A. coming to work under harmful and dangerous working conditions* B. all coming to work on this production C. face under 18 D. face over 55 years E. works
1322. Who is entitled to make the diagnosis of chronic occupational disease: A. center occupational pathology department occupational diseases* B. doctor medical unit C. craft physician, GP D. doctor emergency care E. for each doctors
1323. What is a document drawn up by a doctor of occupational health in the selection of land and examination of construction projects: A. finally* B. act C. business plan assignment D. decree E. protocol
1324. What characterizes the working environment: A. temperature, relative humidity, air speed and infrared* B. is the relative humidity, perspiration , radiation, heat capacity C. is the temperature, atmospheric pressure, thermal conductivity D. is the temperature, the speed of air flow, heat production, radiation E. noise, vibration, EMF
1325. In any of the above documents are assessed working environment: A. Sanitary rules and regulations (SRandR) №020306* B. Sanitary rules and regulations (SRandR) №012001 C. Sanitary rules and regulations (SRandR) №012201 D. Construction norms and rules (CNandR) 2.01.0598 E. Construction norms and rules (CNandR) 2.04.0598
1326. What is the acceptable level of noise intensity in dBA in manufacturing: A. 88 B. 100 C. 80* D. 110 E. 120
1327. What is the performance of the ventilation: A. volume of air supplied to or removed the room in m3/h* B. the velocity of air flow inside the duct C. meet the physical condition of the air hygiene requirements D. physical condition the supply air E. air humidity
1328. What type of cover local exhaust ventilation is most effective: A. hood* B. side pumps are C. vent umbrella D. vent panel E. air curtains
1329. What is the master plan: A. layout of buildings and structures on the territory of the enterprise* B. business plan of the enterprise location in a residential area C. business plan areas where the planned construction of the facility D. business plan accomplishment sanitary protection zone E. business plan residential premises
1330. What is the situation plan: A. layout object construction in the area, its characteristics and the ratio of the object to the residential areas* B. business plan of the facility including industrial and domestic premises C. business plan of mutual accommodation shops and administrative buildings, taking into account the wind rose D. scheme accommodation industrial buildings and sewage treatment plants on site E. business plan accomplishment sanitary protection zone
1331. How does the device measure temperature and relative humidity in the presence of a source of infrared radiation: A. Assman psychereter* B. psychrometer August C. gigrometer D. aktinometer E. lucsmeter
1332. What instrument measures air velocity: A. anemometer* B. aktinometer C. baereter D. radiometer E. lucsmeter
1333. To what preventive measures include ventilation? A. san specifications* B. technology and technology C. medikalprevention D. medikalbiological E. medikalchemical
1334. What are the glasses used to protect the eyes EMF: A. metallic* B. with low light transmittance C. close, reflecting D. open, absorbing E. reticular
1335. What is the leading factor in the use of harmful pesticides: A. chemical* B. dust C. meteorological D. vibration E. noise
1336. Pesticides – is: A. substances of chemical and biological origin used for the protection of plants* B. chemical substances used to increase yields C. agrotechnical reception D. mineral tilizers E. toxic substances used in households
1337. Give the definition of industrial fatigue: A. temporary decrease in efficiency caused by job performance* B. violation of the production dynamic stereotype C. functional changes in organs and systems of the body D. the occurrence of stagnant deceleration in the centers of the brain E. subjective sensation
1338. What characterizes this as an indicator of endurance: A. time, during which work can be carried out by a predetermined force* B. weight of the load, which workers can raise for the length of time C. the body's ability to resist stress situations D. work time in adverse conditions E. experience of working in adverse conditions
1339. Indicator dust load on the respiratory system work is determined by: A. total amount of dust particles entering the respiratory system within a certain time period (shift, month, year, length) * B. total mass of dust incoming inhaled during work experience C. maximal concentration of dust in the working area D. exceeding the study the maximum concentration limit (MCL) 10 times E. a minimal concentration of dust in the working area
1340. What do you think in which class includes the industrial noise with a frequency response up to 1000 Hz: A. high* B. the lowfrequency C. midrange D. mechanical E. tonal
1341. In which class accepted the industrial noise, if the level of the working shift does not change by more than 5 dBA: A. fixed* B. broadband C. hesitant time D. tonal E. mechanical
1342. In which class accepted the industrial noise, if the level of shift changes by more than 5 dBA: A. fixed* B. broadband C. constant D. tonal E. mechanical
1343. What production noise normalizes in the work place in dB: A. permanent* B. intermittent C. pulse D. nonpermanent E. mechanical
1344. It established that industrial ultrasound range includes: A. 16 Hz or less* B. 16 kHz and more C. 31,58000 Hz D. no exact border E. no correct answer
1345. When studying influence of EMF it was established that this range causes professional damages of eyes: A. over high frequencies (OHF) * B. ultra high frequencies (UHF) C. high frequencies D. low frequencies E. there is no correct answer
1346. In the study of the impact of microwave sources, it was found that this range is a professional eye disease: A. cataracts* B. nistagmus C. false shortsightedness D. hyperopia E. conjunctivitis
1347. In the toxicological science, the coefficient of accumulation is called..? A. the relation of LD50 with repeated administration to the LD50 after a single dose* B. LD100 the relation to LD50 C. LD84 the relation to LD16 D. Limас the relation to Limch E. LD50 ch the relation to LD100
1348. In the toxicological science such indicator as the area of chronic action is: A. Limас the relation to Limch* B. LD50 the relation to Limас C. Limас the relation to LD50 D. Limch the relation to Limас E. Limch the relation to LC50
1349. In the event of withdrawal or dismissal of working with production carcinogenic risks whether they pass periodic medical. Inspection: A. yes* B. no C. optional D. only workers of retirement age E. only women of child bearing age
1350. If the workplace air pollutants come from the shotgun mechanism of action, then the air sampling should be carried out: A. is not less than 1 time per month (1st and 2nd class) * B. not less than 1 time per quarter C. permanent sistem with automatic control D. on request management of enterprises E. no correct answer
1351. The toxicological science such indicator as the area of acute effect (Ac) is equal to: A. LD50 the relation to Limas* B. Limас the relation to LD50 C. Limас to the LC50 D. CC the relation to Limch E. Limas the relation to Limch
1352. On the industrial site primary medical facility is presented in the form of: A. health service* B. factory sanatorium C. laboratory D. area of sanitary educational work E. medical advisory center
1353. If a job working adopted without going through the preliminary medical examination on whom rests with the administrative responsibility: A. on the employer* B. on the head physician of the medical unit of the enterprise C. the doctor hygienists D. the doctor's medical commission E. on the guild practitioner
1354. In the case of chronic occupational disease or poisoning by a doctor of occupational CSSES investigation into the cause should be carried out: A. for 7 days* B. as for the day C. to 10 days D. with regard free time occupational health doctor E. on request administration of the company
1355. List the department of health of the production facilities: A. craft factory health centers and health center* B. hospital and pharmacy C. hospital and dispensary D. sanatorium and optics E. area health education and medical assistant item
1356. In some cases, may develop acute occupational disease or poisoning: A. for single exposures (for one shift) * B. with multiple exposures (for one shift) C. with repeated and prolonged exposure to harmful factors (more than one work shift) D. with noncompliance with safety regulations E. no correct answer
1357. The health aeration defined as: A. unorganized natural ventilation through windows and transom* B. organized natural ventilation using vents C. controlled mechanical ventilation with a predominance of inflows D. natural, organized, controlled ventilation E. ventilation (draft)
1358. During ofusing personal computers minimum distance from the monitor screen to the human eye must comply with: A. 40 sm* B. 20 sm C. 60 sm D. 80 sm E. doesn`t metter
1359. Do you think that using personal computers that can have the most detrimental effect on the person: A. monitor* B. system unit C. printer D. modem E. mouse
1360. Do you think that using personal computers as needed to look at the monitor: A. from the top down* B. left to right C. down up D. from right to left E. no difference
1361. Do you think using a personal computer, which direction harmful radiation is the most harmful: A. on the screen back* B. from the screen down C. from the screen forward D. from the screen up E. no correct answer
1362. Do you think the longterm use of personal computers, by how much time you need to spend breaks: A. every 3 hours* B. do not do at all C. every hour D. every 5:00 E. if you experience any discomfort in the eyes
1363. Name of the smallest length of the duration of the break at work for personal computers: A. 510 minutes* B. 2025 minutes C. 2530 minutes D. 3540 minutes E. no correct answer
1364. If you are using a computer breaks between the work should include: A. exercises for the eyes* B. reading the books C. watching TV D. exercises for the feet and hands E. perform heavy physical work
1365. With longterm use of the computer the user is recommended to use vitamins with food groups: A. A, B2, С* B. А, В6, F C. A, B12, D D. A, B, C, D E. С, D
1366. It is assumed that the most effective method of struggle aimed at the prevention of exposure to occupational noise is: A. reduction at source* B. reduction of the spread of C. reduced by the application of the antiphons D. systematic control of the noise level E. periodic and premed. Inspections
1367. The legislation aimed at health and safety of workers, the basic documents are: A. Constitution, labour code, laws* B. including east Jerusalem regulations C. instructions, protocols and orders D. methodical letters, decisions, recommendations E. GOST (State standards of safety), building codes (Building Regulations), instructions
1368. The legislation aimed at health and safety of workers, regulatory documents are: A. SRN (Sanitary rules and norms), GOST, BRI* B. user safety, health C. methodical letters, recommendations, orders D. rule of personal hygiene, the disposal E. recommendations of healthy lifestyle, a resolution
1369. The legislation aimed at health and safety of workers, methodical documents are: A. guidelines, recommendations, guidelines* B. orders, decrees, orders C. GOST occupational safety standards, regulations, orders D. Sanitary rules, instructions, methods of control E. BRI, accounting forms of sanctions
1370. If the occupational health physician assesses various factors, it must be based on: A. sanitary rules and norms* B. GOST occupational safety standards C. Sanitary rules, Sanitary rules and norms D. ergonomic rules E. recommendations of the scientific labour organization
1371. Fundamental documents of the sanitary inspector of occupational health are* A. labour code, the constitution, laws B. Sanitary standards, regulations C. building regulations, orders D. GOST occupational safety standards, methodical letters E. methodical guidance, healthrules
1372. In order to determine the medical staff in the department of occupational health CSSES consider the following calculation: A. on 10 thousand employees 1 bet doctor* B. on 14 thousand employees 1 bet doctor C. to depending on the category CSSES D. 1 doctor on 60 thousand employees E. to depending on the number of enterprises
1373. In order to determine the states of physician assistants in the department of occupational health CSSES consider the following calculation: A. on the 6000 rate of 1 working physician's assistant* B. 2 per physician assistant C. taking into account the category CSSES D. on 30 thousand population 1 assistant E. to depending on the number of enterprises
1374. Specify document of the governing accounting and reporting documentation of CSSES: A. order Ministry of health of the Republic of Uzbekistan number 287* B. user static control C. order Ministry of health of the Republic of Uzbekistan number 200 D. resolution department E. resolution city health department
1375. Which character are fundamental legal and regulatory documents on health and safety: A. state character* B. departmental character C. recommendatory character D. administrative character E. medical character
1376. Name the person responsible for the creation and maintenance of favorable conditions at work: A. administration of the production facility* B. safety engineer C. hygienist doctors of CSSES D. had doctor of the medical unit E. the chief doctor of CSSES
1377. Specify the person responsible under the constitution supreme supervision over the implementation of laws on labor: A. ministry of health, regional health department* B. the attorney general and the prosecutor's office C. ministry of social affairs, state committee for nature D. CSSES, Ministry of labour E. trade union, enterprise administration
1378. In view of the purpose of the sanitary survey are divided: A. plan, indepth, casechecking and inspection* B. control, not planned and collective survey C. single, general and periodic inspection D. incremental, preventive and targeted surveys E. reusable and disposable examination
1379. Specify the timing of the indepth health survey on controlled objects: A. once in every 4 years* B. quarterly C. 2 times per year D. as needed E. on the instructions of the parent bodies
1380. In drawing up the "plansetting" doctor of occupational health must be considered: A. the indepth health survey* B. technological card production process C. general plan of individual departments and sections D. results health screening examinations E. materials of preliminary medical examinations
1381. For laboratory research who are marked on the sketch point measurement of production factors: A. CSSES hygienist doctors* B. engineer of safety C. chief of sanitary laboratory D. chief of the shop E. chief of sanitation department CSSES
1382. List the main objectives of the subject of occupational health: A. creating optimum working conditions, the development of measures to reduce morbidity and improve productivity* B. elimination of occupational diseases, occupational poisoning C. control of noise, vibration and ultraviolet radiation (UVR) D. hygienic assessment of working conditions in agriculture E. hygienic assessment of new substances chemical and biological origin
1383. Doctor on health in its activities uses the following methods of work: A. hygienic, physiological, experimental methods* B. mathematic, chemical, interrogation methods C. technological, physical, clinical methods D. method surveillance, toxicology, statistical methods E. immunologic, radioisotope techniques, questionnaires
1384. The occupational health factors of production are classified as follows: A. physical, chemical, biological, psychophysiological methods* B. technological, variables, constants C. individual, collective, natural factors D. social, household, chemical methods E. impulsive, intermittent, continuous methods
1385. In the field of occupational health and safety work all the existing documents are classified as: A. basic, regulatory, methodical documents* B. indicative guidance, approved documents C. regulations, directives, orders D. departmental, general purpose, industry documents E. personal, service, legal documents
1386. Define whether the document presents the fundamentals of health surveillance: A. the laws of the Republic of Uzbekistan "On sanitary and epidemiological welfare of the population" (2015) * B. order Ministry of health of the Republic of Uzbekistan number 200 C. position of State Sanitary Inspection №361 D. order Ministry of health of the Republic of Uzbekistan number 1075 E. instructions to impose sanctions
1387. What is the carrying out of compensation for harmful working conditions: A. reduction of working hours, additional holidays* B. health education, additional payments to the salary C. the recommendation to increase performance D. personal protective equipment (PPE), making recommendations on labor protection E. medical examinations, a decision of trade union bodies
1388. One of the key documents the department of occupational health CSSES is a work plan consists of the following sections: A. arrangements, sanitation and antiepidemic measures, health education* B. scientific and practical, organizational and methodical work, preventive sanitary supervision (PSN) C. precautionary sanitary inspection (PSI), laboratoryinstrumental work D. scientific methodical work, research E. organizationalmethodical work, precautionary sanitary inspection (PSI), current sanitary inspection (СSI)
1389. Work plan division of occupational health CSSES includes organizational measures includes: A. drawing up plans (reports), preparing memos, meetings, seminars,* B. preparation of materials for the imposition of fines, checking the execution of orders C. conducting health education, comprehensive health survey D. order Ministry of health of the Republic of Uzbekistan number 200 E. the investigation of cases of occupational diseases and the development of recreational activities
1390. When carrying out indepth health examination certificate of sanitary inspection should include: A. passport part, states, concluded deals* B. passport part, concluded the terms of use C. narrative, notes, suggestions, measurement protocols D. recital, the conclusion, legal, plan E. tasknarrative, graphics, finishing, deadlines
1391. In one of the districts of Tashkent total number of employees is 60 thousand. What should be a regular part of health officers in the department of occupational health: A. 6* B. 10 C. 8 D. 4 E. 5
1392. In one of the districts of Tashkent total number of employees is 42 thousand. What should be a regular part of medical care assistant in the department of occupational health: A. 7* B. 5 C. 10 D. 8 E. 4
1393. Display the steps sanctions such as fines: A. certificate of inspection, a protocol of sanitary infringement ruling* B. conclusive act, plan, task, decision C. paint description, lab results, conclusion D. decree by CSSES and controlled objects E. analysis of disease, economic damage
1394. From the population living near to the ginneries, received complaints, on which the doctor in occupational health CSSES should proceed as follows: A. find out the value of the SPZ and the availability of treatment facilities* B. the presence of other hazards in the sanitary protection zone (SPZ) C. planting of greenery SPZ D. the presence of water sources in the enterprise E. examine ventilation in the factory
1395. If the proposal to reduce the overall morbidity with temporary disability are not implemented, as the doctor has to do in occupational health: A. suspension of production facilities* B. preparation materials to the prosecutor C. checking the quality of premed. inspection D. drawing up a protocol on violation of sanitary E. checking the quality of the periodic medical inspection
1396. In some cases, a doctor of occupational health in a number of cases, the collected materials are submitted for further consideration by the prosecutor's office: A. *at disrupting the seals and the resumption of a private facility B. with noncompliance with sanitary regulations C. with nonpayment of the fine within the period D. with complaints of a lack of working illumination E. by order of public administration
1397. Doctor on CSSES been an infringement consisting in the release into the atmosphere of the night shift in the raw air from the production halls. What actions should produce sanitary doctor: A. submit materials to the prosecutor* B. fine plant director C. fine safety engineer D. suspend operation of the facility E. day period to eliminate marked violations
1398. In the study of the incidence of work is accepted that the key factors that can affect health, may include: A. in the natural, social and economic factors* B. state health care budget C. geographic terrain, season of the year D. the density of population in the territory of residence, gender E. age and sex
1399. Do you think that working on the incidence of the most affected: A. working conditions, professional affiliation* B. dietary and preventive nutrition C. providing ablution facilities, light regime D. the presence of the health and health centers E. provide means of individual protection, health education
1400. When analyzing the incidence of working for the uptake, often estimated incidence: A. temporary disability* B. without disability C. taking into account the causes of death D. by hospital morbidity E. by material of periodic medical inspections
1401. For reporting on the incidence of uptake of honey. It is made using the following accounting document: A. return on the causes of temporary disability in the form of temporary disability 16 (TD) * B. ambulatory map 025/f C. report on causes of death D. morbidity according to medical examinations E. conclusive act on periodic med. inspections
1402. The guild doctor on the basis of the original document makes to the report form 16TD data on the incidence of uptake: A. on the basis of sick leave* B. registering complaints from the public CSSES C. results periodic medical examination D. this report hospitals E. on the basis of clinical examination
1403. Sanitary doctor of occupational health department CSSES analyzes the incidence of working for a certain period of time: A. for the quarter, six months, nine months, year* B. this last 3 years C. this current year D. this half compared with the previous year E. this last 5 years
1404. Specify how many stages precautionary sanitary supervision stages of construction: A. four* B. three C. five D. two E. by the discretion of the physician and the health of the customer
1405. What are the basic document, which is filled by a doctor of occupational health in the selection of land and examination of construction projects: A. conclusion* B. act C. business plan assignment D. resolution E. permission
1406. Specify how many stages divided PSS for new chemical substances, equipment and technology: A. three* B. by the discretion of the physician and the health of the customer C. one D. four E. two
1407. Sanitary protection zone is divided into the following classes: A. five* B. by the discretion of the physician and the health of the customer C. four D. three E. one
1408. What is the II stage of PSS for the construction of industrial facilities: A. examination projects* B. inspection during construction C. expertise data on water supply sewerage D. assessment location on a residential area in the zone E. assessment working conditions at night
1409. What is the III stage of PSS for the construction of industrial facilities: A. during construction* B. when choosing a land plot C. when considering treatment facilities D. with examination of the master plan E. with examination of situational plan
1410. What is the IV stage of PSN for construction of industrial facilities: A. roundup of completed projects* B. consideration of construction projects C. consideration of measures for air protection D. examination of the situational plan and water supply E. when considering treatment facilities
1411. What do you think, why it depends on the magnitude of the sanitary protection zone: A. on the nature and amount of pollutant emissions, industry, power, * B. rose winds, the presence of reservoirs C. relief, landscaping D. aero climatic terrain E. from the number of people
1412. Specify the existing standard document according to which assesses the working environment parameters: A. SanRN №020306* B. SanRN №012001 C. SanRN №012201 D. Construction norms and rules (CNR) 2.01.0598 E. does not exist
1413. Define the master plan: A. layout of buildings and facilities on the premises* B. business plan of the enterprise location in a residential area C. business plan areas where the planned construction of the facility D. business plan accomplishment sanitary protection zone E. business plan residential premises
1414. Define situation plan: A. layout object construction in the area, its characteristics and the ratio of the object to the residential areas* B. business plan of the facility including industrial and domestic premises C. business plan of mutual accommodation shops and administrative buildings, taking into account the wind rose D. scheme accommodation industrial buildings and sewage treatment plants on site E. domestic premises business plan for women
1415. Specify the existing standard document for hygienic assessment of lighting levels in the workplace: A. Construction norms and rules (CNR) 2.04.0598* B. Sanitary standards (SS) 27571 C. GOST 12.1.005 88 D. Sanitary standards and rules (SanSandR) 020306 a. SanSandR 012001
1416. Specify the indicators that are taken into account in the standardization of the working environment parameters: A. season, the severity of the work* B. season of the year, time of day C. the severity of the work, the nature of the process D. associated factors of production E. able to work the night shift
1417. Name the lower limit of the ambient air, which refers to the warm season: A. above *100C* B. 100C or lower C. 50C and below D. from 200C and higher E. taking into account the subjective sensations working
1418. Name the lower limit of the ambient air, which refers to the cold season: A. 100C and below* B. above *100C C. below *150C D. from 00C to 150C E. taking into account the subjective sensations working
1419. Note the permissible level of industrial noise (in dB) in the production of: A. 80* B. 88 C. 100 D. 110 E. does not exist
1420. Define performance of ventilation: A. volume of air supplied to or removed from the room in m3/hour* B. air speed inside the duct C. compliance with the physical condition of the air hygiene requirements D. the physical condition of the supply air E. the amount of money spent on the organization of ventilation in production
1421. Do you think any of these types of local exhaust ventilation is the most effective form: A. hood* B. onboard pumps are C. exhaust hood D. exhaust panel E. fan
1422. List the possible forms of the organization of lighting in the production of: A. artificial, natural, combined* B. fluorescent lighting, incandescent C. emergency, nonalarm D. total, combined, top E. at the request of the administration and working
1423. How can I measure the humidity in the room where there is a source of infrared radiation: A. Assman psychrometer* B. hygrometer C. actinometer D. sound level meter E. thermometer
1424. Air velocity is measured by: A. anemometer* B. actinometer C. barometer D. radiometer E. sound level meter
1425. List the classification of industrial dust by origin: A. organic, inorganic, mixed* B. is the natural, plant C. aerozol disintegration, soil D. aerozol condensation mineral E. the mixed, unmixed
1426. The occupational work is divided into: A. physical, mental* B. automated, simple C. monotone, boring D. conveyor, inline E. intelligent, dynamic
1427. In the production of physiological research conducted: A. to work, during work, after work* B. before and after her work C. before lunch break and before the end of the work D. in any time E. in the beginning and end of the working week
1428. To organize physiological studies on the need to organize the production of the group, taking into account: A. sex, age, occupation, length of service, health status* B. profession, family and financial position C. experience, profession, salary D. paul, heredity, periodic medical data. inspections E. family status, occupation
1429. Science physiology of labor is a science: A. studying changes in the functional state of the organism at work* B. studying the deviations in the health of workers C. the mode of only the labor process D. studying the dynamic stereotype E. studying the working position
1430. Classification of labor subdivides it into the following types: A. mental, physical* B. automated, private C. monotonous, thread D. manual skills, the mechanized work E. intelligent, dynamic
1431. Production level of illumination on the working surface is defined by: A. light meter* B. voltmeter C. KCHSZM 1 D. ball tachometer E. psychrometer
1432. Specify the possible mechanical ventilation at the site of action: A. total, the local* B. mechanical, natural C. plenum, exhaust D. air curtain air E. fan, airconditioning
1433. Organization of ventilation in production is considered as: A. sanitarytechnical actions* B. technicaltechnological actions C. medicalpreventive actions D. medicalbiological actions E. the organizational
1434. Put the steps of hygienic assessment of the content of dust in the air of the working area in the correct order: A. learning process, drawing sketch, sampling* B. selection samples, drawing sketch, weighing allonge C. filling protocol, a comparison with the rules, checking equipment D. calculation dust formula, comparison with MPC E. carrying out of the suction method, the seed of animals in the Pravdin’s inoculating camera
1435. Specify the possible categories of division of labor process in severity: A. mild, moderate, severe, very severe* B. manual, mechanized, automated C. local, regional, general, statistical D. short, long, heavy E. easy, hard
1436. What can be as personal protective equipment for eyes and face: A. protective glasses, plates with a light filter* B. pneumohelmets, pneumomasks, helmets C. earplugs, antiphons D. respirators ''Astra2'', mask E. clothing and footwear
1437. List the necessary instruments for carrying out the method for determining the weight of dust in the working area: A. aspirator, allonge, AFA filter, analytical balances* B. Sedimentation chamber ocular micrometer C. rheometer, allonge, vacuum cleaner D. microscope, the filter object micrometer E. the device’s Polezhaev, absorption medium
1438. Cooling adversely affects the working environment in the following industries: A. refrigeration, shipbuilding, work outdoors in winter* B. textile, shoe C. printing, underground, concentrating D. chemical, paint E. engineering, metallurgy
1439. Do you think the use of means of individual protection (MIP) operating in the production is the most drastic measure of all health measures: A. does not* B. yes C. partially D. sometimes E. if it is a private production
1440. Respirators are used as MIP for the prevention of exposure: A. industrial dust* B. gas C. and production of vibration D. fog E. smoke
1441. Specify which types of points to be used in production: A. metallized* B. with low light transmittance C. close, reflecting D. open, absorbing E. optical, nonoptical
1442. When using pesticides in agriculture leading harmful factor is: A. chemical* B. dust C. meteorological D. vibration E. voltage labor
1443. Give the definition of pesticides: A. substances of chemical and biological origin, applied for plant protection* B. chemical substances used to increase yields C. agrotechnical methods D. fertilizers E. synthetic drugs
1444. Specify the variety of biological factors: A. microand macroorganisms and their metabolic products* B. chemical pesticides C. aerosols mixed composition D. essential oils, aromatic compounds, E. only viruses
1445. When conducting toxicological methods vary cumulation: A. material, functional* B. acute, chronic C. is the chemical, physical D. an open, clear E. individual, group
1446. Industrial vibration taking into account the impact on the working method is divided: A. total, the local* B. transportation, technology C. place, technology D. transportation general, technological E. is the unit, multiple
1447. Subject to the application of vibration total production is divided: A. transport, transport and technology, technological* B. vibration the horizontal and vertical axes C. vibration workplace controls D. technological, with the application running on your hands E. transport with vibration of governing bodies
1448. Specify the units of the oscillation frequency of vibration in the production of: A. Hertz* B. Vt/m2 C. Bel D. Nyuton/m2 E. A/m
1449. What do you think, what types of personal protective equipment used for respiratory protection against particulate air pollution: A. respirators* B. pneumohelmets C. gauze bandages D. filter masks E. special clothing, special footwear
1450. Doctor on occupational health in its activities examines the following projects: A. situational plan, master plan, project lighting, ventilation, domestic premises* B. situational plan, project of a sanitary technical construction C. budget documentation, scientific organization of work (SOW) D. staging design, financing schedule E. business plan and adjacent railway stations
1451. In the case of light starvation is necessary to establish special residential premises: A. photary* B. inhaler C. sun bath D. manual and foot baths E. wardrobe
1452. Exposure to low air temperatures to which the disease may result in: A. bronchitis* B. keratit C. neurasthenia D. cataract E. dermatitis
1453. When analyzing the incidence of a document for reporting the incidence of its negotiability are: A. return on the causes of temporary disability in the form of 16TD* B. ambulatory map 025/f C. report on causes of death D. the incidence according to medical examinations E. the final act of the periodic medical. inspection
1454. What is the primary document for the complete report on morbidity in the form of 16TD: A. sick leave* B. registration of complaints from the public C. the final act of the periodic medical inspection D. report of inpatient care E. an act of sanitary survey
1455. Established that the main factors affecting health, are divided: A. in the natural, social and economic* B. the state health care budget C. geographic features of the area, season of the year D. the density of population in the territory of residence, gender E. marital status and number of children in the family
1456. It is assumed that more than anything in the incidence of working affect: A. working conditions, professional affiliation* B. diet and preventive nutrition C. providing ablution facilities, light regime D. the availability of health and common parts. points E. marital status and number of children in the family
1457. Working temperature of the skin in the dynamics of the working day is defined by: A. medical electrothermometry* B. alcohol thermometer C. mercury thermometer D. biocalorimeter E. psychrometer
1458. To determine the reflex reaction to thermal effects are used: A. chronorefleksometr* B. elektrotermoanemometr C. a differential radiometer D. actinometer E. soundlevelmeter
1459. Specify to whom the responsibility of carrying out both preliminary and periodic medical examinations: A. health service, the territorial health facilities* B. workshop doctor therapist C. health center physician, occupational health doctor D. obstetriciangynecologist, dermatologist E. the chief doctor CSSES
1460. In the case of occupational desease hygienic characteristics of working conditions draws: A. hygienist doctors of CSSES* B. engineer safety C. is a principal doctor at MPI D. pathologistdoctor E. CSSES is a principal doctor
1461. Select what determines the organization and composition of residential premises in the production of: A. features of the process and leading occupational hazards* B. from the number of employees and number of shifts C. from adverse weather conditions D. from the intensity of the radiation and heat effects E. from the number of women on the night shift
1462. What determines the number of lockers for storing clothes in the dressing rooms: A. the total number of employees in all shifts* B. from the number of workers in the two most numerous shifts C. from the number working in the most numerous night shift D. from the number working in the day shift E. from the number of women on the night shift
1463. What do you think, what is the purpose of the organization of industrial ventilation systems, taking into account its assessment of hygiene: A. for controlling excess heat and moisture, noxious vapors, gases and dust* B. for collecting and recycling of valuable waste products C. For optimal course of the process D. for prevention of emergency situations and liquidation E. to improve the working
1464. Define the ratio of natural light: A. is a ratio of the illumination of the working surface to the lighting outside the building in%* B. it is the ratio of floor space and the area of the windows C. it is the ratio of the area of windows to the square windows D. it is the ratio of the illumination of the working surface to the lighting in the aisles
1465. The system of units is estimated level of natural lighting: A. suites* B. at % C. to lumens D. to candela E. to dB
1466. Specify the principle of operation of the instrument lightmeter U116: A. a photocell converting radiant energy into electrical energy* B. to measured fluence C. to measuring luminous flux D. in measuring the supply voltage E. to determine the maximum illumination at night
1467. List all the possible benefits of the organization in the production of natural lighting: A. increase in metabolism, antibacterial and photochemical effects* B. high brightness, uniformity C. stimulation of heat transfer and heat loss by the body D. high illumination during the day and the season E. improving efficiency at night
1468. Specify how you must have the facilities, taking into account the wind rose (in relation to residential areas): A. down wind* B. windward C. on a distance of 500 m D. irrelevant E. on a distance of 1000 m
1469. Show the possible types of water use in the production facility: A. domestic water, process* B. for technical purposes and irrigation C. dining and living rooms D. firefighting, antidust E. for swimming pools, saunas
1470. What is the purpose of the periodic medical examination of workers in manufacturing: A. warning occupational diseases, their timely detection, reducing the overall incidence of* B. getting data on the incidence of working at every production C. improved rendering of honey help enterprises D. decrease in severity and intensity of labor E. increase health workers
1471. What is the purpose of a preliminary medical examination of workers in manufacturing: A. does not permit to work in hazardous conditions of persons with contraindications* B. prophylaxis injury C. increase productivity D. improved honey, service workers E. decrease in severity and intensity of labor
1472. Select the stages of work on the use of pesticides: A. preparatory, basic and final* B. drawing up passports pesticides changes C. instruction working, retraining D. storage specials remedies for their issuance E. carrying out of the preliminary, then periodically inspections
1473. Specify those manufacturing plants where the lead as a harmful factor of production is leading: A. getting pure metal and printing* B. application of watersoluble paints, dry cleaning C. when assembling bearings and vacuum devices D. with gaswelding works and metal etching E. to perfume and clothing industry
1474. Select the main indicators characterizing the health of workers: A. demographic, physical development, disability, morbidity* B. population reproduction, mortality, sex, age C. clinical picture, the severity of the disease and its outcome D. living conditions, work organization, the natural environment E. salaries, family budget
1475. When assessing the discharge of industrial lighting visual work is due to: A. the size of the object of discrimination, by contrast, lightness background* B. features of the process, the profession C. the risk of accidents, labor intensity D. lighting duration of visual work E. professionalism of employees, availability of night shifts
1476. Do you think that among the available health measures aimed at preventing exposure to chemical factors is the most effective: A. improvement process, sealing* B. efficient ventilation device C. conducting medical examinations on orders 200 D. organization inhaler E. the organization of health education
1477. What is the work of sanitary inspector of occupational health in the event of failure to pay the fine: A. to make a proposal to hold the unpaid fine in the company accountant* B. notify the administration about the company C. an explanation and give a new term D. suspended from work until payment of the fine and the presentation of an explanation E. make reprimanded the head of the company
1478. Do you think the cases in which the doctor in occupational health is the decision to close the production facility: A. at the onset of chronic occupational disease, failure of seals* B. with no means of means of individual protection (MIP) C. with poor performance ventilation D. with complaints of workers E. when you feel unwell workes
1479. What is the purpose of the organization and the use of different systems of industrial ventilation: A. to bring the physical state and chemical composition of the air in accordance with the technical requirements of hygiene and* B. to reduce the adverse effects of physical factors in the workplace C. to reduce the degree of hard work D. to optimize the working posture and reduce the severity of labor E. for special storage protection
1480. Mental labor in intensity is classified into the following categories: A. unstrained and moderately strained, tense, very tense* B. mechanized, comprehensively mechanized, manual C. automated, monotone, regional, general D. heavy, intense, total, continuous E. mental labor, physical labor
1481. Organization of rational regime of work and rest means: A. the length of work breaks, the number* B. laborconditions, severity and intensity of work C. duration work and place of rest D. only time eating and micro breaks E. active rest in sanatoriums, spas
1482. For the organization of physiological research necessary how many times to do research in the dynamics of the working day: A. 3; before operation, during and after the operation* B. 2; the first and last week of the month C. 2; before and at the end of work shift D. 1; in the middle of change E. by the desire to work
1483. What is the main essence and purpose of physiological research: A. rating severity and intensity of labor, prevention of fatigue* B. establishing nature of the influence of factors of production C. define the effectiveness of key health measures D. rationalization efficient lighting and mechanical ventilation E. to raise the general wellbeing, mood
1484. In enterprises where the leading factor is excess heat, the most efficient ventilation system: A. aeration, general ventilation* B. air , local exhaust ventilation C. airation total supply air D. general and the local mechanical ventilation E. airation, hood
1485. Laboratories for measurement of parameters of microclimate of production used: A. actinometer, psychrometer, wind gauge, thermometer* B. aspirator, rheometer, barometer, thermometer C. hronorefleksometr, medical electric thermometer, hygrometer D. radiometr, bioteplomer, the device Mishchuk, actinometer E. noise meter, tremometr
1486. The technological process of public facilities related to the impact of climate heating: A. forging, metallurgical, thermal* B. spinning, weaving, sewing C. when performing auxiliary works in construction, molding D. when performing highaltitude work, caissons E. with painting and finishing works
1487. In nonmanual workers are most pronounced changes in the following systems: A. central nervous system (CNS) * B. in the respiratory system C. in blood D. in the system of thermoregulation, watersalt metabolism E. in the musculoskeletal system
1488. Specify where you want to store personal protective equipment and special clothing: A. special domestic premises in the workplace* B. in the shop, in the specials chief cabinet shop C. in wardrobe and smoking areas D. in room for smoking, washing E. athome workers
1489. The physical overload divided into: A. static, dynamic* B. mental C. intelligent D. the workers out of work E. professional, industrial
1490. Dusty it: A. harmful physical production factor* B. harmful chemical production factor C. harmful biological production factor D. harmful physiological factor of production E. so factor does not exist
1491. What dust is the most dangerous? A. microscopic* B. submicroscopic C. visible D. invisible E. irrelevant
1492. What dust refers to visible dust dispersion according to: A. more than 10 microns* B. 0,2510 microns C. less 0.25 microns D. invisible E. irrelevant
1493. What is the dust to microscopic dust according to the dispersion: A. 0,2510 microns* B. more than 10 microns C. less than 0,25 microns D. not visible E. irrelevant
1494. What is the dust to the dust under the ultramicroscopic dispersion: A. less than 0,25 microns* B. 0,2510 microns C. more than 10 microns D. not visible E. irrelevant
1495. What is silicosis: A. professional disease from inhaling dust containing free silica* B. occupational disease dust or metal oxides C. occupational disease of carbonaceous dust D. complication of pneumonia E. complication of bronchitis
1496. What is asbestosis: A. professional disease from associated silica dust silicates* B. complication of bronchitis C. occupational disease dust or metal oxides D. complication of pneumonia E. reduced immunity
1497. What carbocanioz: A. professional disease from carbonaceous dust* B. decrease in immunity C. complicationof bronchitis D. professional disease of dust or oxides of metals E. complication of pneumonia
1498. What is metalloconiosis: A. professional disease dust or metal oxides* B. professional disease by inhalation of dust containing free silica C. professional disease dust associated silicon dioxide silicates D. complication of pneumonia E. complication of bronchitis
1499. Dust bronchitis occur when exposed to: A. dust* B. vibration C. noise D. EMF E. infrared
1500. Dermatosis is: A. skin diseases from exposure to talc, lime, etc. substances* B. illness light C. illness organ of hearing D. complication pneumonia E. complication bronchitis
1501.What documents are fundamental legislative documents: A. The Constitution of the Republic of Uzbekistan* B. Labour Code* C. instructions D. guidelines
1502.What documents are normative legislative documents: A. GOST OSSS* B. SNiPs* C. Guidelines D. Recommendations for a healthy lifestyle
1503.By methodical documents include: A. Recommendations* B. Guidelines* C. Ministry of Health of the Republic of Uzbekistan orders D. Guests OSSS
1504.As estimated staff of doctors and physician assistants CGSEN Hygienists: A. 1 Doctor for 10 thousand workers* B. One physician assistant working on the 6000* C. 1 doctor for 14,000 employees D. Depending on the category CGSEN
1505.Which bodies carried out according to the constitution the supreme supervision over the implementation of labor laws: A. Attorney General* B. Prosecuting authorities* C. Ministry of Health D. Ministry of Social Welfare
1506.What kinds of health surveys on controlled objects you know: A. Screening (control)* B. Planned (indepth)* C. Collective D. Free
1507.The main tasks of occupational health: A. Creating optimal working conditions* B. Reduction in the incidence* C. Elimination of occupational diseases and occupational poisoning D. The fight against noise, vibration and UFOs
1508.The main methods of occupational health: A. Hygienic* B. Physiological laboratory tool* C. chemical D. technological
1509.Group production and health factors: A. Biological, physical,* B. physiological, chemical* C. Technological D. Regulations
1510.Legislative documents in the field of occupational health and safety: A. Basic and regulations* B. Instructional methodology* C. Departmental D. Official
1511.How is the compensation for the harmful working conditions: A. Reduction of working hours* B. Additional holiday* C. Through health education D. Development of recommendations to improve performance
1512.Organizationalmethodical works: A. Making plans* B. Preparation of certificates and letters* C. Preparation of materials for the imposition of fines D. Oversight of honey. Inspections by the order №200
1513.Part of the act of profound health survey: A. Passport and recital* B. Proposals and conclusions* C. Descriptive D. drawing up plans
1514.The main factors affecting health: A. Natural* B. Social and economic* C. Geographic features of the area D. The density of population in the territory of residence
1515.Which of these reasons, the most significant effect on the incidence of work: A. Professional affiliation* B. Working conditions* C. Diet meals D. The presence of the medical unit
1516.What these companies the dust is not the leading factor of production: A. Chemical plants* B. Printing.* C. Mining D. Textile production
1517.What PPE is not used for respiratory protection against dust: A. Earplugs* B. Antiphons* C. Respirators D. Gauze bandages
1518.Under what processes do not form large concentrations of aerosols disintegration: A. For the manufacture of furniture* B. For finishing work.* C. With drilling and blasting work D. Textile production
1519.What is mainly determined by the degree of delay in the lung tissue of aerosols: A. Particulate* B. Elektrozaryazhennosti.* C. Form of dust particles D. Chemical composition
1520.Classification of dust (aerosols) on education: A. Aerosol condensation* B. Aerosol disintegration* C. Plant D. Drilling
1521.The vapor of the substance is not possible illumination filter for the study of dispersion of dust: A. phenol and ethanol* B. sulfur dioxide and nitric acid* C. Acetone D. CO2
1522.The main method of controlling the level of EMF is not: A. Subjective feeling of exposure to EMF* B. Clinical Data* C. Instrumental measurement of EMF D. Biziologicheskie data
1523.What are the factors of production are formed by the laser: A. Specific* B. Nonspecific* C. Increased humidity D. High temperature
1524.What units do not belong to a unit volume: A. Wallpaper* B. Sleep* C. Suite D. Watts.
1525.As classified by the nature of the noise spectrum, A. Broadband* B. Tone* C. solid D. tonal
1526.As classified on the temporal characteristics of the noise: A. Fixed* B. Fickle.* C. High D. The lowfrequency
1527.As vibration is classified as an occupational hazard of working in the mode of transmission: A. General* B. Local* C. Technology D. Technical
1528.How common is classified vibration: A. transport and technology* B. transport and technology* C. Vibration on the horizontal and vertical axes D. Vibration workplace.
1529.By measuring vibration units include everything except: A. Hertz * B. Lumens* C. M D. DB
1530.The ultrasound frequency is divided into groups, except: A. Medium* B. UHF* C. High D. Low frequency.
1531.By the time characteristics of infrasound is divided into: A. Fixed* B. Fickle* C. Allowed D. tonal
1532.Cumulation divided into 2 groups, except: A. Acute* B. Functional* C. Material D. Explicit
1533.The objects of the biological factors are all except: A. Chemical pesticides* B. Aerosols mixed composition* C. Micro and macroorganisms D. Waste products of micro and macro
1534.Which companies are most common zooantroponozy: A. Meat plants* B. Livestock* C. Confectionery industry D. Fur production
1535.The final stage of the use of pesticides is: A. Disinfection equipment, packaging* B. Use of PPE* C. The destruction of pesticide residues D. Quality control processing fields
1536.At any stage of working with pesticides should be used PPE: A. On the preparatory* B. On the main* C. The use of pesticides 1 and 2 hazard class D. At the request of employees.
1537.What is used for respiratory protection when exposed to toxic vapors and gases: A. Industrial filter respirators* B. Apparatus* C. Respirator "Petal" D. Respirators "Astra 2"
1538.To combat any harmfulness used masks: A. Gases* B. Couple.* C. fog D. noise
1539.On what types of masks are divided: A. Filter* B. Isolation* C. Outdoor D. Open Type
1540.Specify the PPE from the effects of industrial noise: A. Earbuds* B. Antiphons and ear plugs* C. Gauze bandages D. Plates with filters.
1541.What sunglasses are used to protect the eyes from EMPR: A. Metallized* B. Mesh* C. A low light transmittance D. Closed
1542.The work is divided into: A. Physics * B. Mental* C. Automated D. monotone
1543.Methods of diagnosis of fatigue: A. Objective* B. Subjective.* C. Qualitative D. Quantitative
1544.What are the types of ventilation driving force: A. Mechanical* B. Natural* C. General D. Ventilation
1545.What are the ventilation system at the place of action: A. Total* B. Local* C. Mechanical D. Air curtains
1546.What is the main task of the doctor in occupational health in the hygienic assessment of industrial ventilation: A. rating efficiency* B. rating performance.* C. Determination of the duration of the work D. Determination of the ventilation rate
1547.The frequency of check orders. surveys of production facilities depends on: A. On the timing of orders* B. Sanitary condition of object* C. Qualifications of the doctor in occupational health D. The number of working women and adolescents
1548.For measuring indicators of climate on production include all except: A. Aspirator* B. Hronorefleksometr* C. Actinometer D. Psychrometer
1549.In the following industries may impact climate heating, except: A. Sewing * B. For performing auxiliary works in construction* C. Forging D. Metallurgical
1550.What industries may impact climate cooling: A. Cold* B. Shipbuilding* C. Furniture D. Steel.
1551.Which of the following is most effective ventilation system to combat excessive heat: A. General ventilation* B. Aeration* C. Local exhaust ventilation D. Airing
1552.What instruments are necessary to determine the dust content by weight: A. Aspirator and analytical balances* B. AFA filters allonge* C. Ocular micrometer D. oscilloscope.
1553.What are the measures to combat the dust are the most radical: A. Product* B. Technology* C. Conducting periodic. honey. inspection D. Briefing
1554.What specific factors related to the application of lasers: A. Direct reflection* B. Specular reflection* C. Stress eye and ear D. Noise Vibration
1555.That is mainly attributable to non specific factors in the application of lasers: A. Dust* B. Chemical factor* C. Forced working posture D. Organic solvents
1556.What activities are most effective when exposed to excessive ultraviolet radiation: A. Insulation and shielding jobs* B. PPE for eye and face* C. The use of local exhaust ventilation D. Conducting medical examinations of periodic
1557.To instruments for full characterization of industrial noise include everything except: A. Aspirator* B. Microscope* C. Sound Level Meter D. spectrum analyzer.
1558.Which of these factors do not increase the effect of vibration on the body: A. High temperature* B. Dust* C. low temperature D. noise.
1559.For medical and preventive measures when working with the ultrasound include: A. Introduction mikropereryvov every 1.5 hours of operation* B. Tolerance of persons no younger than 8 years* C. A favorable climate D. Adequate natural lighting.
1560.What are the methods of dealing with infrasound are the most effective: A. Decrease in the spread* B. Reduction at source* C. Preliminary and periodical medical. Inspections D. Reduction of contributing factors.
1561.What changes occur in the body when exposed to heating microclimate: A. Increase in skin temperature and body* B. Sweating and tachycardia* C. The body temperature does not vary D. Bradycardia
1562.For the prevention of prof. pesticide poisoning, which of the recommended actions the most radical: A. Observance of sanitary rules* B. Substitution of less toxic* C. Briefing D. Domestic premises equipment
1563. What are the biological control techniques used in agriculture: A. Plus Application entomophages* B. Microbiological preparations* C. Conditionally pathogenic bacteria D. Dusting, incorporation into the soil
1564.What measures protect the public and environment: A. The presence of the SPZ* B. Warning to the population* C. Sanitary educational work D. Compliance with quarantine prophets enter the cultivated fields
1565.Control over the use of pesticides in agriculture is carried out everything except: A. Doctor rural medical centers* B. Foreman* C. Plant Protection Station D. Environmental authorities.
1566.For the prevention of prof. pesticide poisoning, which of the recommended actions the most radical: A. Compliance with the International Health Regulations* B. Substitution of less toxic* C. Briefing D. Domestic premises equipment
1567.How basic hygiene requirements must comply with PPE: A. Effective* B. no influence on the physiological state employees* C. Ease of use, protection from multiple hazards simultaneously D. Do not require large economic costs
1568.For the prevention of prof. pesticide poisoning, which of the recommended actions the most radical: A. Compliance with the International Health Regulations* B. Substitution of less toxic* C. Domestic premises equipment D. Compliance with quarantine period
1569.Specify the means of eye and face protection: A. Protective goggles* B. Plates with a light filter* C. Pnevmoshlemy, pnevmomaski, helmets D. Earplugs, antiphons
1570.The main objective of physiological studies are: A. rating severity and intensity of labor* B. Prevention of fatigue* C. The establishment of the nature of the influence of factors of production D. Determination of the effectiveness of key health measures
1571.What are the main data is not taken into account in the selection of subjects for physiological research: A. Work and rest* B. Marital status* C. age D. experience
1572.Periods for physiological research: A. Before starting work* B. During and after work* C. In the middle shift D. Every 2 hours of operation.
1573.Which category is divided into work severity: A. Light and medium* B. Heavy and very heavy* C. Hand D. Not heavy
1574.Which category is divided into work intensity: A. Unstrained and moderately strained* B. Tense and very tight* C. Mechanized D. Hand
1575.What is regulated by the rational mode of work and rest: A. The number of interruptions* B. The length of work and breaks* C. The place of rest D. The place where the food
1576.What distinguishes the work and rest: A. DSA* B. Weekly and annual* C. In shifts D. A sevenhour working day.
1577.Specify the process steps in the ginning factories where dust is a major factor: A. Clean cotton raw from impurities* B. Separation of fibers and fluff from the seeds* C. Separating cotton fiber from cotton linters and cleaning D. Sorting of cotton fiber and compact
1578.The main goals of physiological studies include everything except: A. Rationalization of lighting and mechanical ventilation* B. Development plan for medical examinations* C. Assess the severity and intensity of labor D. Prevention of fatigue.
1579.The basic data are taken into account in the selection of subjects for physiological studies include everything except: A. Prof. route* B. Functional state of the central nervous system* C. experience D. profession.
1580.Select PPE that are not related to the means of eye and face protection: A. Earplugs* B. Antiphons* C. Plates with a light filter D. Respirators
1581.How basic hygiene requirements must comply with PPE: A. Effective* B. no influence on the physiological state employees* C. Protection of the entire body at any job D. Ease of use, protection from multiple hazards simultaneously
1582.What changes occur in the body when exposed to heating microclimate: A. Increase in skin temperature and body* B. Sweating and tachycardia* C. Bradycardia D. Lowering the temperature of the skin
1583.For the prevention of prof. pesticide poisoning, which of the recommended actions the most radical: A. Compliance with the International Health Regulations* B. Substitution of less toxic* C. Domestic premises equipment D. Compliance with quarantine period
1584.What techniques do not use biological control in agriculture: A. Integrated method of pest control* B. Opportunistic bacteria* C. The use of entomophagous D. The application of microbiological preparations and pheromones
1585.Voltage, what muscle groups are not observed during the thinning of cotton: A. Lower extremities* B. Foot* C. Back D. Hands.
1586.What PPE should be at work on the water purifier: A. Respirators* B. Antiphons* C. protective glasses D. headphones
1587.Pesticides, a destination most commonly used to protect the cotton plant during its growing season: A. Acaricides* B. Insecticides* C. Nematicides D. Insecticide, rodenticide
1588.Features of working conditions in the cotton industry: A. Lots of work by hand* B. Extensive use of pesticides and fertilizers* C. Not normalized working day D. Mechanization of major works
1589.Factors having a permanent effect on the workplace of machine, except: A. Electromagnetic fields* B. Emotional stress* C. Meteofactors D. traffic fumes
1590.The sequence of actions of the doctor in occupational health screening at a sanitary inspection of the property: A. Notify the administration* B. Verify the prescription and to make the act* C. To carry out the honey. inspection D. Hold san.clearance work
1591.The sequence of actions of the doctor in occupational health at the closing of the property: A. Award decision CGSEN administration* B. Cash Print* C. The imposition of printing warehouses D. Transfer of employees to other work
1592.When investigating complaints about dust from the public find out, except for: A. Availability of treatment facilities* B. Uptake in the public health facilities* C. The sufficiency of the SPZ D. To measure the concentration of dust in the area of residence
1593.In some situations, the doctor makes a decision to close the production facility: A. At the onset of chronic prof. Disease* B. disrupting the seals* C. In the absence of PPE D. Working at complaints
1594.What measures to combat adverse weather conditions are not radical: A. Work and rest* B. Medical examinations* C. heating D. Rational ventilation
1595.Which of the following preventive measures are not the most radical steps to reduce the infrared radiation in the workplace: A. Drinking regime of work and rest* B. Medical examinations* C. mechanization D. Shielding
1596.What measures to combat climate cooling are not radical: A. Instruction* B. San. clearance work* C. Technological D. PPE
1597.Steps for hygienic evaluation of the content of dust in the working area: A. Learning process* B. Drawing sketch* C. Testing of the D. Conducting san.clearance. operation.
1598.The sequence of measures to combat harmful effects EMPR: A. Instruction and technical* B. development at the stage of the SPE and preventive health* C. Hygienic training D. Drawing sketch
1599.What you need to know to fully assess the hygienic production of vibration: A. Type of vibration* B. Intensity and frequency* C. The degree of applied force D. Effects on the body.
1600.The most rational sequence of the proposed measures to combat industrial vibration: A. Predsannadzor in the design of new technology (technology instrument* B. Sanitary* C. The use of antiphons D. Preventive nutrition.
1601.Radical prevention measures infrasound with regard to their effectiveness are not: A. Gardening and health education* B. Selection of holiday destinations with fencing* C. Health preventive D. Organizational and technical
1602.Enter the correct sequence of steps work on the hygienic assessment of chemical factors in the working area: A. Learning process* B. Drawing the sketch, and sampling and analysis* C. Briefing D. Delivery of samples to the CSES.
1603.What are the contributing factors increase toxicity: A. High temperature* B. CO2* C. Low temperature D. The lack of daylight
1604.Which of the following recreational activities for the most radical elimination of chemical factors: A. Sealing* B. Improvement process* C. Conducting medical examinations on orders 200 D. Organization fotariev
1605.What refers to the accompanying factors that increase the negative effects of pesticide use in cotton: A. Hot climate* B. Considerable range and number of treatments* C. Greater wind speeds and humidity D. Large volume of nonmechanized labor
1606.What criteria are not taken into account in the sanitary classification of pesticides: A. Form of the pesticide* B. State of aggregation* C. Hazard Class D. Cumulation 1607.What is the advantage of using a microbial plant protection products: A. Small resistance* B. Does not circulate on circuits biocenosis* C. The use of plants by spraying D. Poorly penetrates the plant and because they do not pollute
1608.Under what professions there is low air pressure: A. Geologists* B. Pilots* C. When operating in remote locations D. When underground work
1609.In some situations, the work must always be carried out with the use of PPE: A. For the application of pesticides* B. For accident* C. During the works related to the monotony D. During the works related to the intensity
1610.What groups are divided into physical work? A. Regional* B. Local* C. Mehanizarovannaya D. Taking into account the degree of monotony
1611.When you perform any of the following works for the occupational physician to evaluate the performance and effectiveness of the ventilation: A. On the 2nd stage of the SPE* B. On the 4th stage in the construction of the SPE* C. In its periodic medical examinations D. When the level of overall morbidity
1612.In what situations have ongoing supervision san (TSN) for the ventilation: A. For the investigation of the PP* B. As planned and screening examinations* C. With complaints from the public D. In preparation for the honey. inspection
1613.From that, basically, the choice depends on the norms of illumination: A. The size of the object of discrimination* B. From the source and lighting systems* C. The height of the suspension lamps D. The coefficient of the light climate
1631. What determines the choice of category of visual work: A. Lightness background* B. Plus the size of the object of discrimination* C. Features of the process, the profession D. The risk of accidents.
1632.What is the source of light and lighting in the most rational work of precision: A. Fluorescent lamps* B. Combined system* C. incandescent lamps D. Natural light
1633.Is hygienic feature the use of pesticides in cotton: A. Use of a large number and variety of pesticides* B. Sequence on large areas* C. The use of pesticides in small areas D. The lack of consistency in the application
1634.What metrics do not represent the state of health: A. Clinical picture, the severity of the disease and its outcome* B. The presence of specialized medical institutions* C. Demographic D. physical development
1635.Because the most common causes of any conditions in the production of toxic substances may enter the body through the intestine: A. For personal hygiene* B. For emergencies* C. With inefficient ventilation D. A change process
1636.Which industries lead can be a leading occupational hazards A. Getting pure metal* B. B Printing* C. The use of watersoluble paints D. When assembling bearings
1637.Which of the compounds are not irritating gases: A. Mercury vapor* B. Hydrocarbons* C. Nitrogen oxides D. Sulfur oxides
1638.What are the requirements for the number of floors and floor covering apply to premises if it will apply the metallic mercury: A. 1 Floor* B. Tsёkalnoe flooring* C. top floor D. Work only in the cold season
1639.In some cases, you can allow the use of metallic mercury: A. Technological necessity* B. Full compliance of premises and equipment* C. The economic feasibility D. Execution of the order №200
1640.ACCIDENTAL leaded gasoline necessary measures: A. Rinse with clean gasoline* B. Fill any oxidant* C. Rinse with water D. To instruct
1641.The main types of biological hazards does not include: A. Dyes in paste and liquid form* B. Dust mixed and inorganic origin* C. Products of microbiological synthesis D. Zooantroponozy
1642.Specify milestones do not belong to the stages on the use of pesticides: A. Drawing passport pesticides* B. Operating instructions * C. preparatory D. main
1643.What is not common classification of pesticides: A. On aggregate state* B. According to the method of application* C. Production D. By origin
1644.When monitoring of working conditions in the application of pesticides, the following measures: A. Maintenance of PPE* B. Determination of pesticides in the working area* C. Availability of rest D. Mealtimes
1645.Specify the most radical group of measures aimed at reducing the incidence of work: A. Technology * B. San. Technical* C. Rational mode of work and rest D. personal care
1646.The objectives of periodic medical. Inspections: A. Warning prof. Diseases* B. Decrease in the overall incidence of* C. Obtaining reliable data on the incidence of working at each site D. Improving the provision of honey. help enterprises
1647.The content of the doctor's work on occupational health at the end of CSI: A. Participation in the drafting of the final act* B. Development of recreational activities* C. Assessment of economic efficiency or damage D. The investigation of occupational accidents
1648.What is not regulated by the order №200: A. Work experience* B. Sex workers* C. View of the harmful factor D. Multiplicity of CSI.
1649.In some situations the doctor is necessary to carry out hygienic assessment of industrial lighting? A. For indepth san. Survey* B. rating of working conditions after the change process* C. Determine the effectiveness of the ventilation D. Evaluation of the performance of ventilation
1650.The choice is determined by the subclass of visual work? A. Contrast* B. Lightness background* C. Intense work D. Duration of visual work.
1651.What determines the choice of lighting norm? A. Plus the size of the object of discrimination* B. Power and Lighting Systems* C. Possibility of using the fluorescent lamps, suspension height D. Lighting fixtures, air condition
1652.Causes elektroftalmii: A. , Electric fences without jobs* B. No PPE* C. Due to the high brightness of the Electric D. The lack of heating
1653.Over what time occupational health doctor does not examine the incidence of: A. For the last 3 years* B. For a month* C. quarter D. Half
1654.Under what circumstances may develop light starvation: A. Work underground* B. Indoor daylight bases* C. Work in refrigerators D. Rotational operation
1655.What measures are not effective in spill metallic mercury: A. Holding san.clearance work* B. Send staff to honey. Inspection* C. Pour the remains of ferric chloride D. To collect mercury
1656.What are the regulations of the sanitary doctor uses when assessing lighting in the production of: A. KMC 2.01.0598 "Natural and artificial illumination"* B. GOST 24940 81 "buildings. Methods for measuring illumination "* C. Order №200 D. Instructions medical laboratory for the measurement of illumination
1657.When hygienic rationing artificial lighting does not take into account: A. The length of the working day* B. Brightness of the surrounding surfaces* C. The accuracy of the visual work D. Contrast with the background of the object of discrimination
1658.What systems are in natural light? A. Side* B. Top* C. Emergency D. Evacuation.
1659.As the lights are classified according to the distribution of the luminous flux? A. Direct light* B. Scattered light* C. Gated D. General type
1660.What systems are not under natural light: A. Alarm* B. Duty* C. Side D. Top
1661.Background lightness which is included in the standardization of lighting on the working light: A. Light and Medium* B. Deep* C. big D. small.
1661.Which of the following deficiencies characteristic of incandescent lamps: A. Low Efficiency* B. Unlike the spectrum of natural light C. In operation is often a ripple D. Light output affected by ambient temperature
1662.Point out the benefits of HID lamps: A. Spectral composition is close to natural light* B. Economy* C. Can be operated under all conditions, without lighting equipment D. Reducing the voltage does not affect the intensity of light
1663.What ventilation systems exist at the place of action? A. Total* B. Local* C. Aeration D. Air baths
1664.From what is a movement of air forces with aeration? A. Thermal head* B. Wind pressure* C. By draft D. Due to the difference in temperature
1665.What equipment is needed to determine the performance of ventilation? A. Micromanometer TSAGI* B. Anemometer* C. barometer D. Rheometer
1666.What are the types of ventilation mode of action? A. Ventilation* B. Exhaust* C. Local D. Broken
1667.When provided for emergency lighting: A. If there is a danger of explosions, fires, poisonings* B. For violations of technological equipment* C. If there are only natural light D. To evacuate people from the premises
1668.How the instrument and measure the production of lighting: A. U117 light meter* B. U117 light meter* C. Actinometer D. Psychrometer
1669.In how many points and how many times it is necessary to carry out measurements of illumination: A. Is not less than 5* B. 3 times* C. At least 3 D. 7 points
1670.What methods is determined by the relative illumination: A. Using graphs spatial isolux* B. Conventional horizontal illuminance* C. On a scale of comparison, taking into account the height of the suspension D. Based on the reflectance of the walls and the ceiling
1671.Types of industrial lighting: A. Artificial and natural* B. Combined* C. Emergency D. Standby
1672.What are the benefits of natural light: A. Increase in metabolism* B. Bactericidal and photochemical effects* C. High brightness D. Stimulation of heat
1673.What determines the choice of light sources and luminaires type: A. Nature of the work* B. Environmental conditions* C. Special requirements and painting facilities and equipment D. Process
1674.What is the purpose of lighting fixtures: A. Redistribution of the luminous flux* B. Protection from the glare of eyes* C. Eye protection from gases and vapors D. An increase in light output lamps
1675.2 Specify the basic direction of measures to ensure the protection and health of workers: A. Hygienic measures* B. Technical measures* C. The system of collective agreements D. Arrangements
1676.Specify the main types of human rights officers assigned by the law "On state sanitary supervision" during the SPE: A. Villa conclusions during PSN* B. Analysis of morbidity with VUT* C. Banning the production of the private sector D. Diagnosis PP & Software
1677.What forms of physician CGSEN Hygienists: A. Routine san supervision (TSN)* B. Warning san supervision (PSN)* C. Preparation of acts of survey
1678.2 Specify the basic groups of legislation, which is conducted on the basis of TSN: A. Act Gossannadzor* B. Sanitary norms, rules and hygienic standards* C. Administrative D. Criminal procedure
1679.What part is not specific to the act san. Survey: A. Data health coaching* B. Prevention of fatigue* C. Finally D. offers
1680.Specify the main groups of research methods used in the indepth san. Survey: A. Statistical* B. Laboratory instrumental* C. functional diagnostics D. US
1681.List the directions predsannadzora (PSN): A. PSN for the design, construction and commissioning of production facilities* B. PSN for new equipment, technology, chemicals* C. The development of the SPE regime of work and rest for various professions D. PSN in prof. Power workers.
1682.Specify the basic information given in the explanatory note to the master plan: A. Brief description of the process* B. Major hazard* C. Working age D. Climatic features
1683.What are the basic parameters that determine the size of the SPZ: A. Nature and quantity of emissions into the environment of hazardous substances* B. Production capacity* C. Number of employees D. The number of the population of the village
1684.List the types of premises belonging to the common domestic premises: A. Shower* B. Wardrobe* C. Smoking D. A room for cooking.
1685.Choose varieties of labor: A. Mental* B. Physics * C. Sedentary D. monotone
1686.What are the main conditions affecting the functional state of the organism in the course of employment: A. Hygienic working conditions* B. Labour Organization* C. Sex workers D. Living conditions Period of the year
1687.What are the conditions which are not important in research of functional state employees A. To measure physical factors* B. To measure the parameters of the microclimate* C. Choose a group working for research D. Evaluate the findings and give an opinion
1688.What are the basic sanitary measures to prevent fatigue: A. Rational ventilation and lighting* B. Elimination or reduction of hazards* C. Preliminary and periodical medical examinations D. Rational and dietetic food.
1689.What are the basic hygiene measures to prevent fatigue: A. Preliminary and periodic medical examinations* B. Rational mode of work and rest* C. Efficient lighting D. The elimination or reduction of hazards
1690.What should be taken when occupations with low air pressure A. PPE* B. Training* C. Medical checkup D. Briefing
1691.List the cases when a doctor spends on occupational health hygienic assessment of meteorological factors: A. Complaints working* B. Scheduled (depth) Health Surveys* C. Reporting of occupational health department for the year D. Report on the meeting of the district health departments
1692.What are the main group of legal documents and regulations to ensure safe working conditions and work organization: A. Standard methodical* B. Nationwide regulations* C. Criminal procedure D. Feasibility
1693.List the steps in the Labour Code, relating to health and safety: A. Creating working conditions that meet safety and hygiene requirements* B. Workweek to 40 hours* C. Allowance to pay for transport D. Allowance for utilities
1694.Specify the controlled objects, which is drawn up indepth san. Survey: A. Company vehicles, communications* B. Industrial Company* C. Financial and economic institutions D. Health care facilities.
1695.Specify the steps PSN for new equipment, technology, chemicals: A. For normative technical documentation* B. For commissioning* C. PSN when tested under conditions of low temperature and subnormal D. PSN when tested under conditions of low atmospheric pressure
1696.List the form of records of the SPE CGSEN: A. 305 / u PSN Card for the object being built* B. 303 / u the conclusion of the project and 301 / y an opinion on the allotment of land* C. 330 / y the study protocol air D. 334 / y noise measurement protocol.
1697.What are the main problems to be solved in the san. Supervision during construction: A. Determine whether the progress of construction project* B. The implementation timetable* C. The degree of mechanization D. Compliance with the regime of work and rest
1698.Specify requirements for the orders. examination of projects domestic premises: A. Matches a set of projected general and special domestic premises* B. Matches lighting, ventilation and heating requirements of the building codes* C. Compliance with a set of domestic premises and equipment, taking into account the number of storeys of the building enterprise D. Compliance with a set of domestic premises and equipment, taking into account the mode of organization and operation of enterprises
1699.What are the stages of physiological research: A. Before starting work and during operation* B. At the end of* C. Every 2 hours of D. Every hour of work
1700.List of production, where the meteorological factor is one of the leading: A. Engineering (hot tseh* B. Refrigeration production* C. Printing D. Auto repair businesses
1701.List the basic medical and preventive measures to deal with adverse weather conditions: A. Rational drinking regime* B. PPE * C. automation D. Rational ventilation
1702. Specify the action in the Labour Code to ensure the rational mode of work and rest: A. Fixed limit working hours* B. Reduction of working hours for a number of professions and jobs* C. Periodic medical. Inspections D. Reduction in the severity and labor.
1703. The main objectives of the Law "On the State Sanitary Inspection": A. Regulation of relations on the sanitary and epidemiological wellbeing and radiation safety of the Republic of Uzbekistan* B. Prevention, detection and suppression of violations of sanitary legislation* C. healthy lifestyle D. Ensuring high efficiency 1704. Types of health surveys conducted by the doctor CGSEN: A. Plan depth* B. Full and thematic* C. At the request of the Administration D. Verification san.prosvet. operation.
1705. List the main tasks performed by a doctor of occupational health during the planned indepth examination of the rank: A. Analysis of the sanitary condition of the supervised object* B. Development on the basis of orders. gig. and antiepidemic rules and regulations related activities and monitoring their implementation* C. Assessment of new chemicals D. Evaluation of new processes that meet hygiene requirements
1706. Call accounting and reporting forms for the measurement of physical factors: A. Protocol measurement of noise and vibration f. 334 / y* B. Measurement protocol meteofactors f. 336 / y* C. Emergency notification f. 058 / y D. The conclusion of the medical commission f. 083 / y
1707. Specify the device efficient lighting in industrial premises: A. Economic hygienic * B. process *; C. To improve subjective feelings D. Public.
1708. Doctors any specialties is working on allotment of land for the production facilities? A. Occupational Health *; B. Communal Hygiene *; C. epidemiologist; D. guild therapist;
1709. The basic documents used during the PSN for new equipment, technology and chemicals: A. GOST OSSS* B. SanPiNs on harmful and hazardous factors* C. instructions D. Orders.
1710. What is the adaptation of the acoustic analyzer? A. recovery time for 3 minutes after the cessation of exposure to noise * B. decrease in hearing sensitivity is not more than 15 dB * C. sharp decline in hearing sensitivity D. decrease in hearing sensitivity by more than 15 dB
1711. Enter the instruments for measuring humidity: A. Psychrometer Assmann * B. psychrometer August * C. anemometer D. light meter
1712. The main goals and objectives of the physiology of labor: A. Study of functional changes in the body in the course of employment* B. Development of measures to increase efficiency* C. The study of working conditions D. Determination of SUN (state of health, activity, mood).
1713. Types of dynamic work on the degree of participation of different groups of muscles: A. Regional (1/3 to 2/3 of the muscles)* B. Local (less than 1/3 of the muscles)* C. The average participation of trunk muscles D. The plight of rotator cuff
1714. Types of mental work: A. Operator activity* B. Intellectual work* C. Monotonous work D. Assembly work 1715. The indicators used for the study of CAS: A. Frequency pulse* B. Blood pressure and stroke and minute volume of blood* C. Venous pressure D. The state of the capillaries.
1716. Devices that are used to study the CAS: A. Heart rate monitor, a surfactant* B. Stara formula* C. Capillaroscope D. Gemoglobinomer.
1717. What form of orders. clearance. Hours: A. Stained glass* B. Booklets and posters* C. Lectures and discussions Sanitary hygienic propaganda and mandatory training of workers in accordance with the profession
1718. The main objectives of physiological research: A. rating severity and intensity of labor* B. Prevention of fatigue* C. The establishment of the nature of the influence of factors of production D. Determination of the main directions of health measures
1719. What refers to the severity of the labor ergometric criteria: A. Working posture* B. The value of the goods* C. Respiratory minute volume D. The number of completed products.
1720. What indicators do not relate to the severity of the labor ergometric criteria: A. The number of completed product* B. Respiratory minute volume* C. Working posture D. The value of the goods
1721.What refers to the labor intensity of ergometric criteria: A. Video visual works* B. Monotony* C. Uncomfortable and forced working posture D. Lack of natural light in the room.
1722. What instruments measure the temperature: A. Thermometer * B. thermographs * C. Light Meter D. radiometer
1723.Which of the works belong to the organizational and methodical? A. Making plans* B. Meetings, seminars* C. Training of trainers D. Conducting medical checks. Inspections by the order №200
1724.What problems are solved in the doctor orders. examination of the gene. Plan production facility? A. Rating is correct placement of plants and facilities in the territory* B. Production rate determines the adequacy of the water supply source for technical purposes* C. Give an opinion on the correctness of the object on the ground D. Evaluates the adequacy of the SPZ
1725. What are the 2 types of moisture: A. Absolute * I. Maximum relative * C. High D. a minimum
1726..Ways to return the body heat to the environment at a high temperature: A. Moisture evaporation from the skin surface* B. Easy* C. convection D. radiation.
1727. What indicators are used to characterize the respiratory system? A. Number of breaths per minute * B. pulmonary ventilation * C. heart rate D. latent reaction time
1728. Specify the parameters for the calculation of the formula Starr LESSON: A. diastolic blood pressure * B. systolic blood pressure, age, working * C. working experience D. profession.
1729. Specify the types of signals, which is determined by the latency of the response: A. Light * B. Sound * C. Ultrasound D. luminescent
1730. Methods san.-clearance. Hours: A. verbal propaganda * B. Print propaganda * C. Identification and study of occupational hazards D. Methods san. instruction
1731. The size of the SPZ at placing production facilities depends on: A. on the industry and power of the enterprise * B. allocated from hazards * C. From landscaping territory of the enterprise D. the number of storeys of shops
1732.Specify the sequence of actions when imposing sanctions: A. Certificate of inspection* B. Protocol of san. Violation and the decision to impose a fine* C. Final Act D. Orders for CGSEN of controlled objects.
1733. What are the challenges in the rank of the doctor decides. examination of the general plan of the production facility? A. estimates correct placement of plants and facilities in the territory * B. determine the adequacy of the water supply flow rate source for technical purposes * C. gives an opinion on the correctness of the object on the ground D. evaluates the sufficiency of the SPZ
1734. What part of the detailed design for the construction of the doctor considers occupational health? A. Situation and master plan * B. Draft lighting and ventilation * C. estimates D. requirements for landscaping the site
1735. The criteria for ergometer work intensity, except for: A. inconvenient and forced working posture * B. lack of natural light in the room * C. category of visual works D. drudgery
1736.By methodical documents include: A. Guidelines* B. Recommendations, instructions* C. Orders D. Guests OSSS
1737. What applies to the labor intensity of ergometric criteria: A. Professional category of the visual work * B. Monotone * C. inconvenient and forced working posture D. Lack of natural light in the room.
1738.The issues described in the opening and rebriefing A. Hazards* B. Signs of poisoning and first aid measures* C. Acquisition of knowledge on ecology D. Expanding horizons
1739.For what purpose is conducted courses of hygienic training of workers: A. In order to prepare public orders. Inspectors* B. For purposes of giving working knowledge relevant for the prevention of adverse effects of production factors* C. To review the orders and regulations to protect the health of workers D. To explain the importance of periodic medical. Inspections
1740. What indicators do not relate to the severity of the labor ergometric criteria: A. respiratory minute volume * B. the number of completed products * C. value of the goods D. Power operation
1741. What relates to the severity of the labor ergometric criteria: A. Arabochaya posture * B. the value of the goods * C. respiratory minute volume; D. the number of completed products.
1742. 2 Specify the period of issue opinions on draft (F-303 / y): A. 2 weeks* B. in some complicated cases - up to a month * C. Do not depend on the period D. when ready
1743.Devices for determination of dust dispersion: A. Special microscope eyepiece* B. Cooked drug dust* C. Gas chromatograph D. Analytical balance
1744.Indicators normal conditions? A. 200C temperature* B. Atmospheric pressure of 760 mm Hg. Art.* C. The warm season D. Air temperature over 250C
1745. What kind of projects should be submitted for approval to the CSES: A. Typical projects that changed * B. Individual projects that are not able to fully take into account all the existing sanitary - hygiene requirements * C. Free D. Private
1746.Classification of noise temporal characteristics: A. Fickle* B. Fixed* C. High D. Fluctuating
1747.What is the adaptation of the acoustic analyzer? A. Time recovery within 3 minutes after the cessation of exposure to noise* B. Decrease in hearing sensitivity is not more than 15 dB* C. A sharp decline in hearing sensitivity D. Decrease in hearing sensitivity by more than 15 dB
1748.Classification of vibration mode of transmission in the works: A. Total* B. Local* C. Vibration hand tools D. Transport
1749.Devices necessary for aspiration sampling method: A. Aspirator* B. Absorber* C. vacuum pump D. Rheometer.
1750.What groups are divided into biological factor? A. Natural * B. Industrial* C. Permanent D. Uniform
1751.Production classification divides pesticides into groups: A. Insecticides* B. Herbicides* C. Contact D. Volatile
1752.The negative side of the use of microbiological plant protection products: A. Increase the contamination of the environment* B. Toxic and allergic effects* C. The need to limit the use of the vicinity of the settlements D. Weak mechanization receiving biologics
1753.Appointment industrial ventilation hygiene items: A. For controlling excess heat* B. For controlling vapors, gases and dust* C. Capture and recycling of valuable waste products D. To prevent accidents and their liquidation
1754.Doctors conducted any special work on the allotment of land for the production facilities? A. Occupational Health * B. Utilities hygiene* C. Epidemiology D. Guild therapist.
1755.Specify the device efficient lighting in industrial premises: A. Hygienic * B. Technological, economic* C. To improve subjective feelings D. State.
1756.Basic lighting units, characterizing lighting: A. Light stream* B. Brightness* C. The power of sound D. power
1757.Sources of artificial lighting in shops: A. Incandescent* B. Fluorescent lamps* C. Halogen bulbs D. Sun rays.
1758.Zakonodatelnye Documents on which the assessment is conducted hygiene in the production of lighting: A. GOST 24940 "Methods of measurement of illumination"* B. KMC 2.01.0598 "Natural and artificial illumination"* C. Guidelines for the control of lighting D. Characteristics of discharge lamps
1759.Types of lighting fixtures used for the protection of light sources: A. Dustproof* B. Hardened* C. Direct light D. Reflected light
1760.The functions of the body, a condition which depends on the light: A. Bandwidth of the visual analyzer* B. Visual acuity and stability of clear vision** C. Injuries D. Glare.
1761.The main methods of evaluating the functional state of the visual analyzer: A. Bandwidth of the visual analyzer* B. The critical fusion frequency of light flashes* C. Latent period for heat D. Tearing
1762.The data for the determination of the coefficient of stability of a clear vision: A. Time vision and the experiment* B. Time not seeing* C. The duration of the working day D. The category of work
1763.Types of devices for measuring the brightness: A. U117 light meter* B. U116 light meter* C. Psychrometer D. aspirator
1764.Harmful to combat that organizes ventilation: A. Excess heat* B. Noxious fumes (gases) and dust* C. radiation D. noise.
1765.For what purpose used ventilation: A. To dust control* B. To the control of harmful vapors and gases* C. To deal with infrasound D. For controlling the laser radiation
1766.For some indicators classified ventilation? A. On stimulus (mechanical, natural)* B. On the principle of action (extraction, airjet)* C. For fan power D. By type of deflectors
1767.Systems technology (technical) measures to prevent exposure to harmful factors: A. Automation* B. Integrated Mechanization* C. PPE D. ventilation.
1768.The indicators characterizing the work of industrial ventilation: A. Productivity ventilation (m3 / h)* B. Efficiency (condition of the air environment)* C. The duration of the work D. Speed of feed air
1769.Indicators for which is determined by the effectiveness of the ventilation: A. The physical condition of the air * B. Chemical composition of air* C. The duration of the work D. Type of ventilation
1770.The indicators needed to define performance and ventilation calculation formula: A. Area duct in m2* B. Speed of movement of air in m / s* C. Type of ventilation D. Relative humidity of the working area.
1771.Conditions required for aeration device: A. Singlestorey building* B. Height of the building is not less than 1012 m* C. Building height does not matter D. Multistorey building.
1772.Benefits of natural ventilation: A. effectiveness against excessive heat* B. Awesome performance* C. Can be used in any room D. Is used to combat a variety of hazard
1773. Advantages of mechanical ventilation: A. Possibility of preparing the air before it enters the shop* B. It is equipped to deal with any harmfulness* C. Did not pollute the environment D. Does not provide related hazards
1774. Lack of mechanical ventilation: A. Considerable material costs* B. Noise and vibration in the shop C. Low efficiency of dust control D. It depends on the period of the year.
1775.Types of air pressure in the duct: A. Static* B. Dynamic* C. Lifting D. Mechanical.
1776.Basic requirements for the orders. examination of projects of ventilation: A. Matches the designed parameters of ambient air hygiene requirements and standards* B. Feasibility of the designed ventilation systems* C. The air supply from top to bottom D. A combination of air heating
1777. What are the officials who can submit projects for approval to the CSES: A. the customer * B. design * C. Representative Raizdrav D. representative of the trade union
1778. What are the main tasks of the doctor in occupational health in the work of the commission at the time of the production facility into operation: A. Assessment of the effectiveness of health measures * B. Sufficient production lighting * C. landscaping D. sufficient magnitude SPZ
1779.Basic conditions for places fresh air intake for the ventilation: A. Location on the windward side* B. On the height of 1.5 2 m from the ground* C. Near the village D. Near the highway
1780.Normative documents for evaluating the effectiveness of the device and the ventilation systems: A. SanPiN № 005896 «microclimate of industrial premises"* B. GOST 12.1.00588 "General hygiene requirements to the working zone"* C. Order number 200 D. Hygiene classification.
1781.Types of structures of local exhaust ventilation: A. Hood* B. Hood* C. Isolation of the workplace D. deflector
1782.The criteria which determine the frequency of monitoring of the ventilation: A. View, ventilation* B. Grade dangerous to remove substances* C. Hazard resistance in the external environment D. Physical state hazard
1783.Criteria for the frequency of monitoring of the ventilation: A. For substances hazard class 1.2 1 time per month* B. Where are local ventilation systems 1 per year* C. If the PP monthly D. At a convenient time.
1784.Types of local ventilation: A. Air dushirovanie* B. Thermal air veils* C. Air swimming pool D. Air "Aquarium"
1785.Specify the steps PSN for new equipment, technology, chemicals: A. When commissioning * B. of normative - technical documentation (NTD) * C. PSN when tested under conditions of low temperature and subnormal D. PSN when tested under conditions of low atmospheric pressure
1786.Organizations conducting certain chemicals in the air at work sites: A. Laboratory centers CGSEN* B. Laboratory industry* C. Private laboratories D. Laboratory joint venture (JV)
1787.Describe the main elements of the control of harmful substances in the working area: A. Chemical analysis of harmful substances* B. The analysis of the results and drawing conclusions* C. Drafting of the collective agreement D. A plan for jobs,
1788.Basic conditions determining the choice of method of air sampling: A. State of matter (steam, gas, dust)* B. Solubility of the test chemical in a variety of sinks* C. specific gravity D. boiling temperature
1789.Equipment for air sampling: A. Filter materials (AFA, FPP and others.)* B. Adsorbents (activated carbon, silica gel)* C. Plastic bags D. Hoses.
1790.The methods most often used for the analysis of air samples in the chemical content: A. Optical (colorimetry, spectrometry, etc.).* B. Electrochemical (polarography, potentiometry, etc.).* C. Settlement D. comparative
1791.Types of chromatography for the analysis of air samples: A. Liquid* B. Gas* C. Does not matter type of chromatography D. Small.
1792.Devices used for rapid method: A. Universal gas analyzer UG1* B. Analyzer AM 5* C. Psychrometer D. Analytical balance
1793.Otrasli Industry, where the chemical is a leading factor of harmful factors: A. Application of chemical compounds (solvents, pesticides, dyes, etc.).* B. Chemical industry* C. Pedagogical activity D. computer work
1794.Situations where a person can influence chemical substances: A. For their production* B. At home* C. When receiving food D. During smoking.
1795.Types of preventive toxicology: A. Production* B. Industrial* C. FOOD D. Municipal
1796.Routes of chemicals at work: A. Via skin and mucous membranes* B. Inhalation* C. Through the mouth (per os) D. If contaminated overalls
1797.The main ways of allocation of chemical substances from the body: A. Leather (sweat and sebaceous glands)* B. Salivary glands* C. hair D. Upon contact.
1798.Types of biological action of chemical factors: A. General toxic effect* B. Specific action* C. Hemolytic D. Chronic poisoning
1799.List the types of current systemic toxicity: A. Acute poisoning* B. Chronic poisoning* C. Subacute poisoning D. Suspected poisoning
1800.Specify the types of specific effects: A. Longterm effects* B. Selective effects* C. disease D. infection
1801.Types of electoral Organotropona steps: A. Neurotropic* B. Hepatotropic* C. The effect on the blood D. Impact on the skeletal system.
1802.The main types of longterm effects, except for: A. Inflammatory* B. Irritant* C. Teratogenic D. Mutagenic
1803.Manifestations of local action, except: A. Hypersecretion* B. Secretion* C. hyperemia D. swelling
1804.Groups of harmful substances according to the degree of danger according to GOST, except: A. Vysokokumulyativnye* B. Highly* C. Chrezvychaynoopasnye D. Highly
1805.The degree of manifestation of cumulative properties, except for: A. Cumulation missing* B. Changeable* C. Cumulation pronounced D. Expressed
1806.List the types of production, where the most often develop professional poisoning: A. Production of heavy metals and their compounds* B. Production of organic solvents* C. Clothing industry D. paper mill.
1807.Main production wher*e possible the impact of lead on working: A. Smelting of lead* B. Printing* C. Shoe Industry D. clothing industry
1808.The terms used for the titles of occupational lead: A. Saturnism* B. Mikrosaturnizm* C. Byssinosis D. Pneumoconiosis.
1809.Manifestations of destruction lead the nervous system, except: A. Bowel disorder* B. Pneumonia* C. Paresthesia D. Neuritis
1810.Group production where mercury is widely used: A. Getting mercury pyrometallurgical* B. Instrumentation* C. Repairs D. road works.
1811.What are the terms used for the titles of occupational diseases by mercury: A. Mercurialism* B. Mikromerkurializm* C. saturnism D. Pneumoconiosis
1812.Specify the types of the leading factors that have carcinogenic: A. Chemical (certain metals and their compounds, hydrocarbons and their derivatives, etc.).* B. Physical (ultraviolet and ionizing radiation)* C. Biological D. A significant mental stress
1813.What documents do not relate to the fundamental legislative documents: A. Instructions* B. Guidelines* C. Constitution of the Republic of Uzbekistan D. labor code
1814.What documents do not refer to the regulatory legislative documents: A. Recommendations for a healthy lifestyle* B. Guidelines* C. SNIP D. SRN.
1815.By methodical documents include, in addition to: A. Ministry of Health of the Republic of Uzbekistan orders * B. The Constitution of the Republic of Uzbekistan* C. Guidelines D. Recommendations.
1816.Which bodies are not carried out according to the constitution the supreme supervision over the implementation of labor laws: A. Ministry of Health* B. Ministry of Social Welfare* C. Attorney General D. The prosecutor's office.
1817.The main objectives of health, except: A. Elimination of occupational diseases and occupational poisoning* B. Control of noise, vibration and UFOs* C. Create optimum working conditions D. Reducing the incidence of
1818.The main methods of care work does not include: A. Chemical* B. Technology* C. physiological D. Laboratory and instrumental
1819.Group production and health factors, in addition to: A. Technology * B. Personality* C. Biological D. Psychophysiological
1820. Legislative documents in the field of occupational health and safety, in addition to: A. Departmental* B. Utilities* C. Basic D. Regulations
1821.Compensation for the harmful working conditions is carried out, except for: A. Through health education* B. Development of recommendations to improve performance* C. Reduction of working hours D. Additional leave
1822.For organizational and methodical type of work does not apply: A. Preparation of materials for the imposition of fines* B. Oversight of honey. Inspections by the order №200* C. Preparation of plans (otcheto D. Preparation of certificates and letters
1823. Part of the act of profound health survey, except for: A. Descriptive* B. Specifications* C. Recital D. Finally
1824.Factors that do not affect health: A. The number of honey. facilities in the area* B. The population density in the territory of residence* C. Natural D. Socioeconomic
1825.Which of these reasons, the least impact on the incidence of work: A. Professional affiliation* B. Diet food* C. working conditions D. The presence of the medical unit
1826.What these enterprises dust is a leading factor of production: A. Mining* B. Chemical plants* C. Textile production D. Enterprise communication
1827.What PPE used for respiratory protection against dust: A. Earplugs* B. Respirators* C. Gauze bandages D. Mesh points
1828.Under what processes formed large concentrations of aerosols disintegration: A. For drilling and blasting work* B. For mining* C. At melting D. In the manufacture of furniture
1829.Specify the physical factors: A. Working environment* B. EMF * C. Mikroorgnanizmy D. Intensity of work
1830.List the symptoms of allergic effect of: A. Allergic rhinitis* B. Hives* C. SARS D. infection.
1831.What manifestation of the infectious effects: A. Penitsilliozy* B. Kandidomikoz* C. hay fever D. hives
1832.Most common in the manufacture of zooantropanozy: A. Brucellosis* B. Tularemia* C. hepatitis D. bronchial asthma.
1833. Give the most dangerous manifestations of toxicity: A. Poisoning by toxic fungi (120 species* B. Hives* C. Poisoning by mycotoxins (100 species D. SARS E. Allergic rhinitis.
1834. Positive aspects of the use of pesticides: A. Save harvest* B. Protection of farm animals against parasites* C. No significant influence on the people D. Environmental pollution
1835.The negative consequences of the use of pesticides: A. Environmental pollution* B. Influence on people* C. Destroying insects D. Dependence on the period of the year
1836.Situations in which pesticides affect humans: A. When applying * B. Via contaminated environmental objects* C. Have not undergone instruction D. When operating in the treated fields
1837.What forms of pesticides: A. A solution of* B. Pellets* C. Mixtures D. Ointment.
1838.Stages in the application of pesticides: A. Preparation* B. Basic* C. introductory D. To check efficiency.
1839.What methods of processing plants in agriculture: A. Tractor * B. Aviation * C. With the help of improvised material D. There are no special techniques.
1840.Specify the basic rules of safety at the preparatory stage: A. Use only approved drugs in Uzbekistan ("List")* B. Tolerance people have passed a medical examination and special training* C. Adjusted for seasonal work D. healthy lifestyle.
1841.Categories of persons who are prohibited from working with pesticides: A. Positive women after age 50, men over 55 years old* B. Pregnant and lactating women* C. Without agronomic education D. Persons older than 20 years.
1842.Specify requirements for warehouses for the storage of pesticides: A. Is specifically built room has 2 types of rooms (for storage and for the Personnel* B. The presence of mechanical ventilation and artificial lighting* C. Natural light D. The availability of specially trained guards.
1843.Specify requirements for the release of pesticides from the warehouse: A. Issuance of the written consent of the head* B. Keeping strict records income and expenditure of pesticides in a special register* C. Issuing only familiar faces D. Giving higher management
1844.Types of biological pesticides: A. Microbiological* B. Fungal * C. Fertilizer D. minerals
1845.What microbiological pesticides: A. Bacterial * B. Virus* C. Fertilizers D. Antibiotics
1846.What are the ways seed treatment: A. Dry method* B. Wet process* C. Do not discriminate D. Scrap materials.
1847.What methods are used for seed treatment? A. Central* B. Decentralized* C. From materials at hand D. There is no special method
1848.List the types of work that is required to apply the PPE: A. When collective protection measures do not give the desired effect* B. Alarm work* C. At the request of employees D. At the request of the Administration
1849.What documents do not relate to the fundamental legislative documents: A. Instructions* B. Guidelines* C. Constitution of the Republic of Uzbekistan D. labor code
1850.What documents do not refer to the regulatory legislative documents: A. Guidelines* B. Recommendations for a healthy lifestyle* C. Guests OSSS D. SNIP
1851. By methodical documents include, in addition to: A. Ministry of Health of the Republic of Uzbekistan orders * B. GOST OSSS* C. Guidelines D. Recommendations.
1852. As estimated staff of doctors and physician assistants CGSEN Hygienists: A. 1 Doctor for 10 thousand workers* B. 1 Physician assistant working on the 6000* C. 1 doctor for 14,000 employees D. Depending on the category CGSEN
1853. Authorities carried out according to the constitution the supreme supervision over the implementation of labor laws, except: A. Ministry of Health* B. Ministry of Social Welfare* C. Attorney General D. The prosecutor's office.
1854.What kinds of health surveys are not conducted on controlled objects you know: A. Collective * B. Routine* C. Checking (control) D. Scheduled (indepth)
1855.The main objectives of health, except: A. Elimination of occupational diseases and occupational poisoning* B. Control of noise, vibration and UFOs* C. Create optimum working conditions D. Reducing the incidence of
1856.The main methods of health, except: A. Chemical* B. Technology* C. Hygienic D. physiological
1857.Group production and health factors, in addition to: A. Technology * B. White* C. Biological D. Psychophysiological
1858. Legislative documents in the field of occupational health and safety: A. Basic* B. Regulations* C. Departmental D. Official
1859.How is the compensation for the harmful working conditions: A. Reduction of working hours* B. Additional holiday* C. Through health education D. Development of recommendations to improve performance
1860.Organizationalmethodical works: A. Preparation of certificates and letters* B. Meetings and seminars* C. Preparation of materials for the imposition of fines D. Oversight of honey. Inspections by the order №200
1861.The main factors affecting health: A. Natural* B. Social and economic* C. Geographic features of the area D. The density of population in the territory of residence
1862.Which of these reasons, the most significant effect on the incidence of work: A. Professional affiliation* B. Working conditions* C. Diet meals D. The presence of the medical unit
1863. What is mainly determined by the degree of delay in the lung tissue of aerosols: A. Particulate* B. Elektrozaryazhennosti.* C. Form of dust particles D. Chemical composition
1864. As vibration is classified as an occupational hazard of working in the mode of transmission: A. Total* B. Local* C. Technology D. Technical
1865. By measuring vibration units include everything except: A. Hertz * B. Lumens * C. M / D. DB
1866. RAS frequency divided into two groups, except: A. Medium* B. UHF * C. High D. Low frequency.
1867. By the time characteristics of infrasound is divided into: A. Fixed* B. Fickle* C. Allowed D. tonal
1868. Cumulation divided into 2 groups, except: A. Acute* B. Functional* C. Explicit D. Local.
1869. The objects of the biological factors are all except: A. Chemical pesticides* B. Aerosols mixed composition* C. Micro and macroorganisms D. Waste products of micro and macro
1870. Which companies are most common zooantroponozy: A. Meat plants* B. Livestock* C. Confectionery industry D. Fur production
1871.What is included in the main stage of the use of pesticides: A. Processing fields by land* B. Fields of air treatment method* C. Preparation techniques for processing fields D. Quality control processing
1872.The final stage of the use of pesticides is: A. Disinfection equipment, packaging* B. Use of PPE* C. The destruction of pesticide residues D. Quality control processing fields
1873.At any stage of working with pesticides should be used PPE: A. On the preparatory* B. On the main* C. The use of pesticides 1 and 2 hazard class D. At the request of employees.
1874.What is used for respiratory protection when exposed to toxic vapors and gases: A. Industrial filter masks* B. Isolation masks* C. Respirator "Petal" D. Respirators "Astra 2"
1875.To combat any harmfulness used masks: A. Gases* B. Couple.* C. fog D. noise
1876.On what types of masks are divided: A. Filter* B. Isolation* C. Outdoor D. Open Type
1878.Specify the PPE from the effects of industrial noise: A. Earbuds* B. Antiphons* C. Gauze bandages D. Plates with filters.
1879. What sunglasses are used to protect the eyes from EMPR: A. Metallized* B. Mesh* C. A low light transmittance D. Closed
1880.Methods of diagnosis of fatigue: A. Objective* B. Subjective.* C. Qualitative D. Quantitative
1881.What are the types of ventilation driving force: A. Mechanical* B. Natural* C. General D. Ventilation
1882.What are the ventilation system at the place of action: A. Total* B. Local* C. Mechanical D. Air curtains
1883.What is the main task of the doctor in occupational health at a health assessment of industrial ventilation: A. rating efficiency* B. rating performance* C. Determination of the ventilation rate D. Assessment of the effectiveness of treatment facilities
1884.The frequency of check orders. surveys of production facilities depends on: A. On the timing of orders* B. Sanitary condition of object* C. Qualifications of the doctor in occupational health D. The number of working women and adolescents
1885. For measuring indicators of climate on production include all except: A. Aspirator* B. Hronorefleksometr* C. Actinometer D. Psychrometer
1886. In the following industries may impact climate heating, except: A. Sewing * B. For performing auxiliary works in construction* C. Forging D. Metallurgical
1887.What industries may impact climate cooling: A. Cold* B. Shipbuilding* C. Furniture D. Steel.
1888.Which of the following is most effective ventilation system to combat excessive heat: A. Aeration* B. General ventilation* C. Local exhaust ventilation D. Airing
1889.What are the measures to combat the dust are the most radical: A. Product* B. Technology * C. Conducting periodic. honey. inspection D. Briefing
1890.What specific factors related to the application of lasers: A. Direct reflection* B. Specular reflection* C. Stress eye and ear D. Noise and Vibration
1891.That is mainly attributable to nonspecific factors in the application of lasers: A. Dust* B. Infrared radiation* C. Forced working posture D. Organic solvents
1892.What activities are most effective when exposed to excessive ultraviolet radiation: A. Insulation and shielding jobs* B. PPE for eye and face* C. The use of local exhaust ventilation D. Conducting medical examinations of periodic
1893.To instruments for full characterization of industrial noise include everything except: A. Aspirator* B. Microscope* C. Sound Level Meter D. spectrum analyzer.
1894.Which of these factors do not increase the effect of vibration on the body: A. High temperature* B. Dust* C. low temperature D. Static force
1895. For medical and preventive measures when working with the ultrasound include: A. Introduction mikropereryvov every 1.5 hours of operation* B. Tolerance of persons no younger than 8 years* C. A favorable climate D. Adequate natural lighting.
1896.What are the methods of dealing with infrasound are the most effective: A. Reduction at source* B. Decrease in the spread* C. The use of PPE D. Preliminary and periodical medical. Inspections
1897.What changes occur in the body when exposed to heating microclimate: A. Increase in skin temperature and body* B. Sweating * C. The body temperature does not vary D. Bradycardia
1898.For the prevention of prof. pesticide poisoning, which of the recommended actions the most radical: A. Compliance with the International Health Regulations* B. Substitution of less toxic* C. Domestic premises equipment D. Compliance with quarantine period
1899.What are the biological control techniques used in agriculture: A. Plus Application entomophages* B. Microbiological preparations* C. Conditionally pathogenic bacteria D. Dusting, incorporation into the soil
1900.What measures protect the public and environment: A. The presence of the SPZ* B. Warning to the population* C. Sanitary educational work D. Compliance with quarantine prophets enter the cultivated fields
1901.Control over the use of pesticides in agriculture is carried out everything except: A. Doctor rural medical centers* B. Foreman* C. Plant Protection Station D. Environmental authorities.
1902. How basic hygiene requirements must comply with PPE: A. Effective* B. no influence on the physiological state employees* C. Protection of the entire body at any job D. Ease of use, protection from multiple hazards simultaneously
1903. Specify the means of eye and face protection: A. Protective goggles* B. Plates with a light filter* C. Pnevmoshlemy, pnevmomaski, helmets D. Earplugs, antiphons
1904. The main objective of physiological studies are: A. rating severity and intensity of labor* B. Prevention of fatigue* C. The establishment of the nature of the influence of factors of production D. Determination of the effectiveness of key health measures
1905. What are the main data is not taken into account in the selection of subjects for physiological research: A. Work and rest* B. Marital status* C. age D. experience
1906. Periods for physiological research: A. Before starting work* B. During operation* C. In the middle shift D. Every 2 hours of operation.
1907. What distinguishes the work and rest: A. DSA* B. Week* C. In shifts D. A sevenhour working day.
1908. By measuring vibration units include everything except: A. Hertz * B. Lumens * C. M / D. DB
1909. RAS frequency divided into two groups, except: A. Medium* B. UHF * C. High D. Low frequency.
1910. By the time characteristics of infrasound is divided into: A. Fixed* B. Fickle* C. Allowed D. tonal
1911. Cumulation divided into 2 groups, except: A. Acute* B. Functional* C. Material D. Explicit
1912. The objects of the biological factors are all except: A. Chemical pesticides* B. Aerosols mixed composition* C. Micro and macroorganisms D. Waste products of micro and macro
1913. Which companies are most common zooantroponozy: A. Meat plants* B. Livestock* C. Confectionery industry D. Fur production
1914. What is included in the main stage of the use of pesticides: A. Processing fields by land* B. Fields of air treatment method* C. Quality control processing D. Decontamination art.
1915. The final stage of the use of pesticides is: A. Disinfection equipment, packaging* B. Use of PPE* C. The destruction of pesticide residues D. Quality control processing fields
1916. At any stage of working with pesticides should be used PPE: A. On the preparatory* B. On the main* C. The use of pesticides 1 and 2 hazard class D. At the request of employees.
1917. What is used for respiratory protection when exposed to toxic vapors and gases: A. Industrial filter masks* B. Isolation masks* C. Respirator "Petal" D. Respirators "Astra 2"
1918. When hygienic rationing artificial lighting does not take into account: A. Voltage level of authority* B. The length of the working day* C. Contrast with the background of the object of discrimination D. The accuracy of the visual work
1919. What systems are in natural light? A. Side* B. Top* C. Emergency D. Standby
1920. As the lights are classified according to the distribution of the luminous flux? A. Direct light* B. Scattered light* C. Gated D. General type
1921. What systems are not under natural light: A. Alarm* B. Duty* C. Side D. Top
1922. Background lightness which is included in the standardization of lighting on the working light: A. Light* B. Middle* C. big D. small.
1923. Which of the following deficiencies characteristic of incandescent lamps: A. Low Efficiency* B. Unlike the spectrum of natural light* C. In operation is often a ripple D. Light output affected by ambient temperature
1924. Point out the benefits of HID lamps: A. Spectral composition is close to natural light* B. Economy* C. Can be operated under all conditions, without lighting equipment D. Reducing the voltage does not affect the intensity of light
1925. What ventilation systems exist at the place of action? A. Total* B. Local* C. Aeration D. Air baths
1926. From what is a movement of air forces with aeration? A. Thermal head* B. Wind pressure* C. By draft D. Due to the difference in temperature
1927. What equipment is needed to determine the performance of ventilation? A. Micromanometer TSAGI* B. Anemometer* C. barometer D. Rheometer
1928. What are the types of ventilation mode of action? A. Ventilation* B. Exhaust* C. Local D. Broken
1929. When provided for emergency lighting: A. If rejecting working lights there is a danger of explosions, fires, poisonings* B. For violations of technological equipment* C. To evacuate people from the premises D. In low light working light
1930. How the instrument and measure the production of lighting: A. U117 light meter* B. U117 light meter* C. Actinometer D. Psychrometer
1931. In how many points and how many times it is necessary to carry out measurements of illumination: A. Is not less than 5* B. 3 times* C. At least 3 D. It does not matter the number of measuring points
1932. What methods is determined by the relative illumination: A. Using graphs spatial isolux* B. Conventional horizontal illuminance* C. On a scale of comparison, taking into account the height of the suspension D. Based on the reflectance of the walls and the ceiling
1933. Types of industrial lighting: A. PU* B. Natural* C. Emergency D. Standby
1934. What are the benefits of natural light: A. Increase in metabolism* B. Bactericidal and photochemical effects* C. Stimulation of heat D. High illumination during the day.
1935. What determines the choice of light sources and luminaires type: A. Nature of the work* B. Environmental conditions* C. Special requirements and painting facilities and equipment D. Process
1936. What is the purpose of lighting fixtures: A. Redistribution of the luminous flux* B. Protection from the glare of eyes* C. Eye protection from gases and vapors D. An increase in light output lamps
1937. Enter the 4 main areas of activities to ensure the protection and health of workers: A. Hygienic measures* B. Technical measures* C. The system of collective agreements D. Arrangements
1938. Specify the main types of human rights officers assigned by the law "On state sanitary supervision" during the SPE: A. Villa conclusions during PSN* B. Analysis of morbidity with VUT* C. Banning the production of the private sector D. Diagnosis PP & Software
1939. What forms of physician CGSEN Hygienists: A. Routine san supervision (TSN)* B. Warning san supervision (PSN)* C. Preparation of acts of survey D. Briefing.
1940. Specify 3 main groups of legislation, on the basis of which is held TSN: A. Act Gossannadzor* B. Sanitary norms, rules and hygienic standards* C. Administrative D. Criminal procedure
1941. What part is not specific to the act san. Survey: A. Data health coaching* B. Prevention of fatigue* C. Finally D. offers
1942. Specify the main groups of research methods used in the indepth san. Survey: A. Statistical* B. Laboratory instrumental* C. functional diagnostics D. US
1943. List the directions predsannadzora (PSN): A. PSN for the design, construction and commissioning of production facilities* B. PSN for new equipment, technology, chemicals* C. The organization of the SPE process D. The development of the SPE regime of work and rest for various professions
1944. Specify the basic information given in the explanatory note to the master plan: A. Brief description of the process* B. Major hazard* C. Climatic features D. Sources of financing and the total cost of construction
1945. What are the basic parameters that determine the size of the SPZ: A. Nature and quantity of emissions into the environment of hazardous substances* B. Production capacity* C. Number of employees D. The number of the population of the village
1946. List the types of premises belonging to the common domestic premises: A. Wardrobe* B. Shower* C. Disposal of overalls D. Smoking
1947. Choose varieties of labor: A. Mental* B. Sedentary* C. monotone D. physical
1948. What are the main conditions affecting the functional state of the organism in the course of employment: A. Hygienic working conditions* B. Labour Organization* C. Sex workers D. Living conditions
1949. What are the conditions which are not important in research of functional state employees A. To measure physical factors* B. To measure the parameters of the microclimate* C. Choose a group working for research D. Evaluate the findings and give an opinion
1950. What are the basic sanitary measures to prevent fatigue: A. Elimination or reduction of hazards* B. Rational ventilation and lighting* C. Preliminary and periodical medical examinations D. Rational and dietetic food.
1951. What are the basic hygiene measures to prevent fatigue: A. Rational mode of work and rest* B. Preliminary and periodic medical examinations* C. Promotion of harm of smoking D. Efficient lighting
1952. List the cases when a doctor spends on occupational health hygienic assessment of meteorological factors: A. Complaints working* B. Scheduled (depth) Health Surveys* C. Reporting of occupational health department for the year D. Report on the meeting of the district health departments
1953. What are the main group of legal documents and regulations to ensure safe working conditions and work organization: A. Standard methodical* B. Nationwide regulations* C. Criminal procedure D. Feasibility
1954. List the steps in the Labour Code, relating to health and safety: A. Creating working conditions that meet safety and hygiene requirements* B. Workweek to 40 hours* C. Allowance to pay for transport D. Allowance for utilities
1955. List the steps in the Labour Code, which do not relate to health and safety: A. Rebate on payment of transport* B. Rebate on utilities* C. The creation of working conditions that meet safety and hygiene requirements D. The working week to 40 hours
1956. Specify the controlled objects, which is drawn up indepth san. Survey: A. Industrial Company* B. Company vehicles, communications* C. Financial and economic institutions D. Health care facilities.
1957. Specify the steps PSN for new equipment, technology, chemicals: A. For commissioning* B. For normative technical documentation (HT* C. PSN when tested under conditions of low temperature and subnormal D. PSN when tested under conditions of low atmospheric pressure
1958. List the form of records of the SPE CGSEN: A. 305 / u PSN Card for the object being built* B. 303 / u the conclusion of the project* C. 330 / y the study protocol air D. 334 / y noise measurement protocol.
1959. What are the main problems to be solved in the san. Supervision during construction: A. Determine whether the progress of construction project* B. The implementation timetable* C. The degree of mechanization D. Compliance with the regime of work and rest
1960. Specify requirements for the orders. examination of projects domestic premises: A. Sufficiency and accuracy of mutual location and equipment closets, showers, washrooms and others.* B. Matches lighting, ventilation and heating requirements of the building codes* C. Compliance with a set of domestic premises and equipment, taking into account the number of storeys of the building enterprise D. Compliance with a set of domestic premises and equipment, taking into account the mode of organization and operation of enterprises
1961. What are the stages of physiological research: A. Before starting work* B. At the end of* C. Every 2 hours of D. Every hour of work
1962. List of production, where the meteorological factor is one of the leading: A. Engineering (hot tseh)* B. Refrigeration production* C. Printing D. Auto repair businesses
1963. List the basic medical and preventive measures to deal with adverse weather conditions: A. Rational drinking regime* B. PPE * C. automation D. Rational ventilation
1964. Specify the action in the Labour Code to ensure the rational mode of work and rest: A. Fixed limit working hours* B. Reduction of working hours for a number of professions and jobs* C. Periodic medical. Inspections D. Reduction in the severity of labor.
1965. What is not provided for in the Law "On the State Sanitary Inspection": A. Healthy lifestyle* B. Ensuring high availability* C. Regulation of relations on the sanitary and epidemiological wellbeing and radiation safety of the Republic of Uzbekistan D. Prevention, detection and suppression of violations of sanitary legislation
1966. List the types of the main premises of the production facility: A. Production* B. Administrative* C. Laboratory D. canteen.
1967. What are the premises that are not part of the general sanitary and household: A. Warehouses* B. Specific domestic premises* C. Walkin closets D. Shower
1968. Specify the criteria according to which is determined by a sufficient set of sanitary household premises and equipment: A. The number of working personnel in the greatest change* B. The number of working women in the greatest change* C. The number of professional groups D. The volume of production.
1969. Which industries lead can be a leading occupational hazards A. B Printing* B. Getting pure metal* C. The use of watersoluble paints D. When assembling bearings
1970. Which of the compounds are not irritating gases: A. Mercury vapor* B. Hydrocarbons* C. Sulfur oxides D. chlorine
1971. What are the requirements for the number of floors and floor covering apply to premises if it will apply the metallic mercury: A. 1 Floor* B. Tsёkalnoe flooring* C. Work only in the cold season D. Work only in daylight.
1972. In some cases, you can allow the use of metallic mercury: A. Technological necessity* B. Full compliance of premises and equipment* C. The economic feasibility D. The qualitative conduct briefing
1973. ACCIDENTAL leaded gasoline necessary measures: A. Rinse with clean gasoline* B. Fill any oxidant* C. Rinse with water D. To instruct
1974. The main types of biological hazards does not include: A. Dyes in paste and liquid form* B. Dust mixed and inorganic origin* C. Zooantroponozy D. Products of microbiological synthesis
1975. Specify milestones do not belong to the stages on the use of pesticides: A. Drawing passport pesticides* B. Operating instructions * C. preparatory D. main
1976. What is not common classification of pesticides: A. On aggregate state* B. According to the method of application* C. Production D. By origin
1977. When monitoring of working conditions in the application of pesticides, the following measures: A. Determination of pesticides in the working area* B. Maintenance of PPE* C. Availability of rest D. Mealtimes
1978. 2 Specify the most radical group of measures aimed at reducing the incidence of work: A. Technology * B. San. Technical* C. Rational mode of work and rest D. personal care
1979. The objectives of periodic medical. Inspections: A. Warning prof. Diseases* B. Reduction of overall morbidity* C. Obtaining reliable data on the incidence of working at each site D. Improving the provision of honey. help enterprises
1980. The content of the doctor's work on occupational health at the end of CSI: A. Participation in the drafting of the final act* B. Development of recreational activities* C. Assessment of economic efficiency or damage D. The investigation of occupational accidents
1981. What is not regulated by the order №300: A. Work experience* B. Sex workers* C. View of the harmful factor D. Multiplicity of CSI.
1982. In some situations the doctor is necessary to carry out hygienic assessment of industrial lighting? A. For indepth san. Survey* B. rating of working conditions after the change process* C. Evaluation of the performance of ventilation D. Determination of the necessary sets of personal protective equipment
1983. The choice is determined by the subclass of visual work? A. Contrast* B. Lightness background* C. Intense work D. Duration of visual work
1984. What determines the choice of lighting norm? A. Plus the size of the object of discrimination* B. Power and Lighting Systems* C. Lighting system, the light of climate factor D. Lighting fixtures, air condition
1985. Causes elektroftalmii: A. , Electric fences without jobs* B. No PPE* C. Eye condensation aerosol D. Due to the high brightness of the Electric
1986. Over what time occupational health doctor does not examine the incidence of: A. For the last 3 years* B. For a month* C. quarter D. Half
1987. Under what circumstances may develop light starvation: A. Work underground* B. Indoor daylight bases* C. Work in refrigerators D. Rotational operation
1988. What measures are not effective in spill metallic mercury: A. Holding san.clearance work* B. Send staff to honey. Inspection* C. To collect mercury D. Hold demerkurializatsiyu room.
1989. What are the regulations of the sanitary doctor uses when assessing lighting in the production of: A. KMC 2.01.0598 "Natural and artificial illumination"* B. GOST 24940 81 "buildings. Methods for measuring illumination "* C. Order №300 D. Instructions medical laboratory for the measurement of illumination
1990. When hygienic rationing artificial lighting does not take into account: A. The length of the working day* B. Voltage level of authority* C. Contrast with the background of the object of discrimination D. The accuracy of the visual work
1991. What systems are in natural light? A. Side* B. Top* C. Emergency D. Standby
1992. As the lights are classified according to the distribution of the luminous flux? A. Direct light* B. Scattered light* C. Gated D. General type
1993. What systems are not under natural light: A. Alarm* B. Duty* C. Top D. Combined.
1994. Background lightness which is included in the standardization of lighting on the working light: A. Light* B. Middle* C. big D. small.
1995. Which of the following deficiencies characteristic of incandescent lamps: A. Unlike the spectrum of natural light* B. Low Efficiency* C. In operation is often a ripple D. Light output affected by ambient temperature
1996. Point out the benefits of HID lamps: A. Spectral composition is close to natural light* B. Economy* C. Reducing the voltage does not affect the intensity of light D. Low efficiency.
1997. What ventilation systems exist at the place of action? A. Total* B. Local* C. Air baths D. Housing ..
1998. From what is a movement of air forces with aeration? A. Thermal head* B. Wind pressure* C. Due to the difference in temperature D. Exhaust fan window.
1999. What equipment is needed to determine the performance of ventilation? A. Micromanometer TSAGI* B. Anemometer* C. barometer D. aspirator.
2000. What are the types of ventilation mode of action? A. Ventilation* B. Exhaust* C. Broken D. pull out drobe.
2001. How does the device not possible to carry out measurements of industrial lighting: A. Actinometer* B. Psychrometer* C. U117 light meter D. U117 light meter.
2002. In how many points and how many times it is necessary to carry out measurements of illumination: A. Is not less than 5* B. 3 times* C. At least 3 D. It does not matter the number of measuring points
2003. What methods is determined by the relative illumination: A. Using graphs spatial isolux* B. Conventional horizontal illuminance* C. On a scale of comparison, taking into account the height of the suspension D. Based on the reflectance of the walls and the ceiling
2004. Types of industrial lighting: A. PU* B. Natural* C. Emergency D. Standby
2005. What are the benefits of natural light: A. Increase in metabolism* B. Bactericidal and photochemical effects* C. High brightness D. Stimulation of heat
2006. What determines the choice of light sources and luminaires type: A. Nature of the work* B. Environmental conditions* C. Special requirements and painting facilities and equipment D. Process
2007. What is the purpose of lighting fixtures: A. Redistribution of the luminous flux* B. Protection from the glare of eyes* C. Eye protection from gases and vapors D. An increase in light output lamps
2008. Enter the 4 main areas of activities to ensure the protection and health of workers: A. Hygienic measures* B. Technical measures* C. The system of collective agreements D. Arrangements
2009. Specify the main types of human rights officers assigned by the law "On state sanitary supervision" during the SPE: A. Analysis of morbidity with VUT* B. Villa conclusions during PSN* C. Banning the production of the private sector D. Site visits at any time without permission.
2010. What forms of physician CGSEN Hygienists: A. Filling protocols* B. Current rank of supervision (TSN)* C. Warning san supervision (PSN) D. Preparation of acts of survey
2011. Specify 3 main groups of legislation, on the basis of which is held TSN: A. Act Gossannadzor* B. Sanitary norms, rules and hygienic standards* C. Administrative D. Criminal procedure
2012. What part is not specific to the act san. Survey: A. Data health coaching* B. Prevention of fatigue* C. Finally D. offers
2013. Specify the main groups of research methods used in the indepth san. Survey: A. Statistical* B. Laboratory instrumental* C. functional diagnostics D. US
2014. List the directions predsannadzora (PSN): A. PSN for the design, construction and commissioning of production facilities* B. PSN for new equipment, technology, chemicals* C. The development of the SPE regime of work and rest for various professions D. PSN in prof. Power workers.
2015. Specify the basic information given in the explanatory note to the master plan: A. Brief description of the process* B. Major hazard* C. Climatic features D. Sources of financing and the total cost of construction
2016. What are the basic parameters that determine the size of the SPZ: A. Nature and quantity of emissions into the environment of hazardous substances* B. Production capacity* C. Number of employees D. The number of the population of the village
2017. List the types of premises belonging to the common domestic premises: A. Wardrobe* B. Shower* C. Disposal of overalls D. Smoking
2018. Choose varieties of labor: A. Mental* B. Physics * C. Sedentary D. monotone
2019. What are the main conditions affecting the functional state of the organism in the course of employment: A. Hygienic working conditions* B. Labour Organization* C. Living conditions D. Period of the year
2020. What are the conditions which are not important in research of functional state employees A. To measure physical factors* B. To measure the parameters of the microclimate* C. Choose a group working for research D. Evaluate the findings and give an opinion
2021. What are the basic sanitary measures to prevent fatigue: A. Elimination or reduction of hazards* B. Rational ventilation and lighting* C. Preliminary and periodical medical examinations D. Rational and dietetic food.
2022. What are the basic hygiene measures to prevent fatigue: A. Rational mode of work and rest* B. Preliminary and periodic medical examinations* C. Efficient lighting D. The elimination or reduction of hazards
2023. List the cases when a doctor spends on occupational health hygienic assessment of meteorological factors: A. Complaints working* B. Scheduled (depth) Health Surveys* C. Reporting of occupational health department for the year D. Report on the meeting of the district health departments
2024. What are the main group of legal documents and regulations to ensure safe working conditions and work organization: A. Basic* B. Standard methodical* C. Criminal procedure D. Feasibility
2025. List the steps in the Labour Code, relating to health and safety: A. Creating working conditions that meet safety and hygiene requirements* B. Workweek to 40 hours* C. Allowance to pay for transport D. Allowance for utilities
2026. Specify the controlled objects, which is drawn up indepth san. Survey: A. Financial and economic institutions* B. Company vehicles, communications* C. Industrial enterprises D. Agricultural production facilities
2027. Specify the steps PSN for new equipment, technology, chemicals: A. For commissioning* B. For normative technical documentation (HT* C. PSN when tested under conditions of low temperature and subnormal D. PSN when tested under conditions of low atmospheric pressure
2028. List the form of records of the SPE CGSEN: A. 305 / u PSN Card for the object being built* B. 303 / u the conclusion of the project* C. 330 / y the study protocol air D. 334 / y noise measurement protocol.
2029. What are the main problems to be solved in the san. Supervision during construction: A. Determine whether the progress of construction project* B. The implementation timetable* C. The degree of mechanization D. Compliance with the regime of work and rest
2030. What are the main tasks of the doctor in occupational health in the work of the commission at the time of the production facility into operation: A. Evaluation of the effectiveness of health measures* B. Sufficiency of industrial lighting* C. The adequacy of the value of the SPZ D. Prevention software, and the PP.
2031. What officials who can submit projects for approval to the CSES: A. Customer* B. Designer* C. A representative of the trade union D. Heads. CSES doctor.
2032. Which projects should be submitted for approval to the CSES: A. Standard designs in which changes* B. Individual projects that are not able to fully take into account all the existing sanitary hygiene requirements* C. Free D. Collective
2033. 2 Specify the period of issue opinions on draft (F303 / y): A. 2 weeks* B. In some complicated cases up to a month* C. Does not depend on the period D. as we get ready
2034. Types of mental work: A. Work at the controls* B. Operator activity* C. Monotonous work D. Assembly work
2035. The indicators used for the study of CAS: A. Frequency pulse* B. Blood Pressure* C. Venous pressure D. The state of the capillaries.
2036. Devices that are used to study the CAS: A. Heart rate monitor* B. Capillaroscope* C. SAW D. Stara formula E. Gemoglobinomer.
2037. What form san.prosvet. Hours: A. Stained glass* B. Booklets and posters* C. Lectures and discussions D. Preparation of public orders. instructors.
2038. The main objectives of physiological research: A. rating severity and intensity of labor* B. Prevention of fatigue* C. The establishment of the nature of the influence of factors of production D. Determination of the main directions of health measures
2039. What refers to the severity of the labor ergometric criteria: A. Working posture* B. The value of the goods* C. Respiratory minute volume D. The number of completed products.
2040. What indicators do not relate to the severity of the labor ergometric criteria: A. The number of completed product* B. Respiratory minute volume* C. The value of the goods D. Power operation
2041. What refers to the labor intensity of ergometric criteria: A. Video visual works* B. Monotone * C. Uncomfortable and forced working posture D. Lack of natural light in the room.
2042. Ergometer criteria intensity of labor, except: A. Inconvenient and forced working posture* B. No natural light in the room* C. The category of visual works D. Drudgery
2043. Which parts of the detailed design for the construction of the doctor considers occupational health? A. Situational and general plan* B. Project lighting and ventilation* C. Budget documentation D. Requirements for the improvement of the site
2044. Which of the works belong to the organizational and methodical? A. Drawing up plans (otcheto* B. Meetings, seminars* C. Conducting medical checks. Inspections by the order №200 D. The investigation of cases of prof. diseases.
2045. What problems are solved in the doctor orders. examination of the gene. Plan production facility? A. Rating is correct placement of plants and facilities in the territory* B. Production rate determines the adequacy of the water supply source for technical purposes* C. Give an opinion on the correctness of the object on the ground D. Evaluate the location according to the wind rose
2046. The size of the SPZ at placing production facilities depends on: A. On the industry and power companies* B. Allocated from the hazards* C. From landscaping territory of the enterprise D. The availability of premises and household waste sites
2047. Ways to return the body heat to the environment at a high temperature: A. Moisture evaporation from the skin surface* B. Easy* C. conduction D. convection
2048. Methods san.clearance. Hours: A. Visual propaganda* B. Oral propaganda* C. Detection and study of occupational hazards D. Method of orders. instruction
2049. Specify the types of signals, which is determined by the latency of the response: A. Light* B. Sound* C. ultrasonic D. Luminescent.
2050. Specify the parameters for the calculation of the formula CRM Starr: A. Diastolic pressure* B. Systolic blood pressure* C. Experience of working D. profession.
2051. What indicators are used to characterize the respiratory system? A. Number of breaths per minute* B. Pulmonary ventilation* C. heart rate D. Latent reaction time
2052. What are 3 types of moisture: A. Absolute* B. Max* C. Minimal D. High
2053. What instrument measures air temperature: A. Thermometer* B. Thermographs* C. Light meter D. radiometer.
2054. Specify the devices that measure humidity: A. Psychrometer Asman* B. August psychrometer* C. anemometer D. Light meter.
2055. Classification of noise temporal characteristics: A. Fickle* B. Fixed* C. High D. Fluctuating
2056. What is the adaptation of the acoustic analyzer? A. Time recovery within 3 minutes after the cessation of exposure to noise* B. Decrease in hearing sensitivity is not more than 15 dB* C. A sharp decline in hearing sensitivity D. Decrease in hearing sensitivity by more than 15 dB
2057. Classification of vibration mode of transmission in the works: A. Total* B. Local* C. Vibration hand tools D. Transport
2058. Devices necessary for aspiration sampling method: A. Aspirator* B. Absorber* C. vacuum pump D. Rheometer.
2059. What groups are divided into biological factor? A. Natural * B. Industrial* C. Uniform D. Distribution.
2060. Production classification divides pesticides into groups: A. Insecticides* B. Herbicides* C. Contact D. Volatile
2061. The negative side of the use of microbiological plant protection products: A. Increase the contamination of the environment* B. Toxic and allergic effects* C. Weak mechanization receiving biologics D. Mechanization of weak application of biological products.
2062. Appointment industrial ventilation hygiene items: A. For controlling excess heat* B. For controlling vapors, gases and dust* C. Capture and recycling of valuable waste products D. To prevent accidents and their liquidation
2063. Doctors conducted any special work on the allotment of land for the production facilities? A. Occupational Health* B. Utilities hygiene* C. Epidemiology D. Therapist guild
2064. Specify the device efficient lighting in industrial premises: A. Hygienic * B. Technology* C. To improve subjetive feelings D. State.
2065. Basic lighting units, characterizing lighting: A. Light stream* B. Brightness* C. The power of sound D. power
2066. What documents are normative legislative documents: A. GOST OSSS* B. SniPs* C. Guidelines D. Recommendations for a healthy lifestyle
2067. By methodical documents include: A. Recommendations* B. Guidelines* C. Ministry of Health of the Republic of Uzbekistan orders D. Guests OSSS
2068. As estimated staff of doctors and physician assistants CGSEN Hygienists: A. 1 Doctor for 10 thousand workers* B. 1 Physician assistant working on the 6000* C. 2 doctors for 24 million workers D. Depending on the category CGSEN
2069. Which bodies carried out according to the constitution the supreme supervision over the implementation of labor laws: A. Attorney General* B. Prosecuting authorities* C. Ministry of Health D. Ministry of Social Welfare
2070. What kinds of health surveys on controlled objects you know: A. Screening (control)* B. Planned (indepth)* C. Collective D. Free
2071. The main tasks of occupational health: A. creation of optimal working conditions* B. reduction in the incidence* C. elimination of occupational diseases and occupational poisoning D. control of noise, vibration and UFOs
2072. The main methods of occupational health: A. Hygienic* B. Saline* C. chemical D. technological
2073. Legislative documents in the field of occupational health and safety: A. Basic* B. Regulations* C. Departmental D. Official
2074.Name 2 main objectives and problems of physiology of work A. Studying of functional changes in an organism in the course of labour activity* B. Working out of measures of increase working ability* C. Definition the DIGNITY (state of health, activity, mood) D. Working out of criteria of weight of work
2075.Name 2 versions of physical work A. Dynamic* B. Static* C. The monotonous D. The inactive
2076. What 2 indicators apply to the breath characteristic A. Number breath in minutes* B. Pulmonary ventilation (FASHIONS) * C. Rhythm D. Depth of breath
2077. Specify 2 working conditions at which in an operating time inquiry О2 is not satisfied with an organism A. At heavy dynamic work* B. At static work* C. At monotonous work D. At hypokinesis
2078. List 2 kinds PSI A. PSI behind designing, building and commissioning new, reconstructed, expanded industrial objekts* B. PSI behind new technics and technology, chemical substances, equipment and other* C. PSI behind working out of modes of work and rest for various trades D. 0PSI behind the organisation of technological process E. PSI behind creation ESP(equipments of selfprotection)
2079. Name 2 kinds of ventilation, effective for struggle it is much warm A. Natural (aeration) * B. Mechanical (local exhaust, the general flowing, air shower) * C. general exchange D. Air veils
2080. Name 2 kinds of special household premises which need to be organised A. Room psychological unloading* B. ultraviolet * C. Premise for rest with cooling panels D. The equipment of "aquariums"
2081. Name 2 classifications of noise by SRS 012001 A. On character spectre* B. On time characteristics* C. On intensity D. On loudness
2082. Name 2 kinds of noise on character A. Spectrum* B. Widestripped* C. tonal D. The continuous
2083. Name 2 kinds of noise taking into account time characterics A. Constant* B. Unconstant* C. The loud D. The low
2084. Name 2 kinds of action of noise on an organism A. The general (nonspecific) * B. Local (specific) * C. honadotrop D. embriotrophik
2085. Specify 2 classifications of an infrasound by character of a spectrum A. widestripped* B. harmonic* C. The continuous D. The pulse
2086. Name 2 kinds of an infrasound under time characteristics A. Constand* B. Anconstand* C. The transport D. The inharmonious
2087. Name 2 classifications of ultrasound A. Lowfrequency vibration* B. Highfrequency vibration* C. The periodic D. The chaotic
2088. Name 2 kinds of a dust by origin A. Organic* B. Inorganic* C. highdispers D. The radioactive
2089. Name 2 ways of formation of a dust A. Aerosol integration* B. Aerosol condensation* C. Fibrous dust D. Mixed an aerosol
2090. Name 2 methods of definition of concentration of a dust in air A. Aspiration* B. Counter* C. The chemical D. The express
2091. What are necessary for providing 2 special premises on A. Manufacture where the leading factor is the dust* B. As a part of household premises a room for security uniform* C. As a part of public health services premises – inhalatorin D. Semisouls E. Room of psychological unloading
2092. Name 2 kinds of vibration under the time characteristic A. Constant* B. Unconstant* C. The general D. The local
2093. Specify 2 kinds of vibration in a direction to axes of coordinates A. Vertical* B. Horizontal* C. The angular D. The axial
2094. Name 2 kinds of action ЭМП on an organism A. Nonspecific (thermal action) * B. specific (radio wave illness) * C. Toxic influence D. The remote effects
2095. Name 2 biological effects of the chemical factor A. generaltoksic action* B. Specific action* C. hemolitic D. Sharp poisoning
2096. Name 2 kinds of cumulateve properties of chemical substances A. Material kumulation* B. Functional kumulation* C. deposit a pharynx D. Paratoxic effect
2097. Specify 2 terms applied to the name of professional illnesses from mercury A. Mercurialision* B. Micromerculiasion* C. saturnision D. fluctiation
2098. List 2 advantages of natural ventilation A. efficiency* B. Huge productivity* C. It can be applied in any premise D. It is used for struggle with various harmful
2099. What 2 kinds of ventilation are arranged for struggle against a dust A. Local friction* B. The general affluent* C. Natural commanchange D. Aeration
2100. List 2 systems of artificial illumination A. Common* B. combine* C. The combined D. The mixed
2101. Name 2 legislative documents on the basis, which A. GOST 24940 "Methods of measurement of light exposure" B. КМК 2.01.0598"Natural and artificial illumination" C. The hygienic estimation of light exposure on manufacture is spent D. Methodical instructions on light exposure control
2102. List 2 kinds of devices for light exposure gauging A. lyuksmeter yu116 B. lyuksmetre yu117 C. Photometer D. adaptemeter
2103. Specify 2 conditions defining a choice of a way of sampling of air A. Modular condition substance* B. Solubility of investigated chemical substance in different solvents* C. Relative density D. Boiling temperature
2104. What 2 changes occur in an organism first of all under Influence of an adverse microclimate A. Overload* B. Overfreeziking* C. Headache D. Decrease in weight of a body
2105. Name 2 components of process of thermoregulation of an organism A. Physical thermoregulation* B. Chemical thermoregulation* C. Positive thermal radiation D. Negative thermal radiation
2106. Specify 2 kinds of devices for vibration measurement A. Noise and vibration measuring instruments (VMI1, IMV1)* B. Sets of measuring devices (RFT00041, 00042)* C. Recorder D. Hygrometer
2107. Specify 2 kinds of a current commontoxic actions A. Sharp poisoning* B. khorm.poisoning* C. подострое a poisoning D. Suspicion on a poisoning
2108. Name 2 terms used for names Professional illnesses from lead A. Sathurnisum* B. Microsaturnism* C. bissinosis D. antracosis
2109.Which bodies carried out according to the constitution the supreme supervision over the implementation of labor laws: A. Attorney General* B. Prosecuting authorities* C. Ministry of Health D. Ministry of Social Welfare
2110.What kinds of health surveys on controlled objects you know: A. Screening (control)* B. Planned (indepth)* C. Collective D. Free
2111.The main tasks of occupational health: A. Creating optimal working conditions* B. Reduction in the incidence* C. Elimination of occupational diseases and occupational poisoning D. The fight against noise, vibration and UFOs
2112.The main methods of occupational health: A. Hygienic* B. Physiological laboratory tool* C. chemical D. technological
2113. Specify 2 factors possessing cancerogenic property A. chemical* B. physical* C. The biological D. Considerable mental overstrain
2114. Specify 2 ways of processing of plants in agriculture A. Tractor* B. Aviation* C. ранцевый D. The contact
2115. Name 2 indicators characterising work of ventilation A. Productivity* B. Efficiency* C. Balance of air exchange D. Speed of submitted air
2116. Name 2 criteria from which periodicity of control depends Behind ventilation work A. Kind, system ventilation* B. Class of danger deleted substance* C. Firmness of harm in environment D. Modular condition of harm
2117. Name 2 kinds of local forced ventilation A. Air shover* B. Thermal air weight* C. Air "aquariums" D. Water veils
2118. Specify 2 kinds of units used for an estimation of light exposure at work A. Lux (at artificial illumination) * B. ratio natural illumination КЕО (at the natural and combined illumination) * C. ratio sunniness (at natural illumination) D. Light factor (at natural illumination)
2119. Specify 2 kinds of control of the maintenance of harmful substances in air of a working zone A. The chemical analysis harmful substance* B. The analysis of the received results with the subsequent working out improving arrangements* C. Studying of safety arrangements D. Collective agreement drawing up
2120. That is used for protection of respiratory organs at influence of toxic steams and gases: A. Industrial filtering againstgas* B. Isolating againstgas* C. Respirators "Petal" D. Respirators «the Aster 2»
2121. For calculation the IOC by means of Starr's formula what it is necessary to know indicators: A. Age worker* B. diastolic and sistolic pressure* C. Floor of the working D. The experience of the working
2122. Advantages of gasdischarge lamps is: A. The spectral structure is close to natural light* B. Economic* C. Operation in any conditions without lighting equipment is possible D. The voltage reduction in a network does not render influence on force of light
2123. For struggle against what harm gas masks are used: A. Gas* B. Steam* C. Noise D. Smoke
2124. Gas masks are subdivided into what types: A. Filtering againstgas* B. Isolating againtgas* C. Open type D. valve gas masks
2125.What points are used for protection of eyes from ЭМПР: A. Metallized glasses* B. Mesh glasses* C. With small factor omit light D. The closed points
2126. Frequency of verifying sanitary inspections of industrial objects depends: A. From performance terms indication* B. From a sanitary condition object* C. From qualification of the doctor on factory hygiene D. From quantity of working women and teenagers
2127. What actions are most effective at influence superfluous UF radiations: A. Isolation and shielding of workers sweep* B. СИЗ an eye and face* C. Use of local exhaust ventilation D. Carrying out of periodic medical surveys
2128. What of the specified factors do not strengthen vibration action on an organism: A. High temperature* B. Dust* C. Low temperature D. Static effort
2129. Medikopreventive measures at work with UFB concerns: A. Introduction of microbreaks in each 1,5 hours work* B. The admission of persons is not younger 8 year* C. Massage D. Favorable microclimate
2130. What methods of struggle against an infrasound are the most effective: A. Decrease on the way distribute* B. Decrease in a source education* C. Application SIZ D. Reduction of concomitant factors.
2131. Recommended measures at preventive maintenance of the prof. of poisonings by pesticides: A. Observance sanitary rule* B. Replacement by less toxic pestisits* C. Instructing D. The equipment of household premises
2132. What measures of protection of the population and environment: A. Presence of a sanitaryprotective zone (СЗЗ) * B. The notification population* C. Sanitary – educational work D. Observance of quarantine terms of an exit on the processed fields
2133. In what situations current sanitary inspection (ТСН) behind ventilation is spent: A. At investigation of cases of professional disease (PD) * B. At planned and verifying examination* C. At complaints from the population D. By preparation for carrying out of medical survey
2134. What of the resulted connections do not concern irritating gases: A. Steams mercury* B. Carbon* C. Nitrogen oxides D. Sulphur oxides
2135. At evolution ethylic etheri gasoline necessary actions: A. To wash off pure benzene* B. To fall asleep any oxidize* C. To instruct
2136. The maintenance of work of the doctor on factory hygiene on the termination of carrying out of periodic medical inspection (PMI): A. Participation in drawing up final act* B. Working out improving arrangement* C. Economic efficiency or damage estimation D. Working out of a rational mode of work and rest
2137. Than the choice subdivide visual work is defined: A. Contrast* B. bright background* C. Intensity of work D. Duration of visual work
2138. For what terms the doctor on factory hygiene does not analyze disease: A. For the last 3 year* B. Halfyear* C. For month D. Year
2139. List the primary goals solved by the doctor on factory hygiene at carrying out of planned inspection deepened a dignity: A. The analysis of a sanitary condition under control object* B. Working out on a basis san.hyg againstepidemic norms and rules of corresponding actions and control over them fulfillment* C. Estimation of new chemical substances D. Estimation of the new technological processes answering to hygienic requirements
2140. Most often come across zooantropogist on manufacture: A. Бруцеллез* B. Туляремия* C. Hepatitis D. wren
2141. Result the most dangerous displays of toxic effect: A. Poisoning with toxic mushrooms (120 kinds) * B. Poisoning микотоксинами (100 kinds) * C. wren D. ОРВИ
2142. Positive aspects of application of pesticides: A. Preservation harvest* B. Protection of agricultural animals from parasitis* C. Not considerable influence on people D. Pollution of objects of environment
2143. Negative consequences of application of pesticides: A. Pollution of objects surrounding among* B. Influence on peoples* C. Destroy insects D. Dependence on the period of year
2144. Name ways of a prograss of seeds: A. Dry method* B. Damp method* C. Do not distinguish D. Manual way
2145. You know what kinds of sanitary inspections, which are not spent on under control objects: A. Collective inspections* B. Flowing inspections* C. Verifying (control) inspections D. Planned (profound) inspections
2146. What of the specified reasons most of all influence disease of the working: A. Professional furnishings* B. Conditions work* C. A dietary food D. Presence of a medicosanitary part
2147. For struggle, against what harm gas masks are used: A. Gass* B. Vapor* C. Fog D. Noise
2148. Specify types of gas masks: A. iltering againstgas* B. Isolating againstgas* C. External gas masks D. Gas masks of open type
2149. On what frequency of verifying sanitary inspections on industrial objects depends: A. From performance terms indication* B. Sanitary condition object* C. Qualifications of the doctor on factory hygiene D. Quantity of working women and teenagers
2150. Specify most 2 groups of the radical measures directed on decrease of disease of the working: A. Technological measure* B. San.technical measure* C. Rational mode of work and rest D. Personal hygiene 2151. 3 on the dispersion characteristics of the dust : A.low-dispersion finely * B. medium size * C.small* D.ultra macroscopic E.mikroskopicheskaya F.vidimaya
2152. Definition phase dispersion of dust: A. Air sampling * B. Preparation of dust preparation * C. Microscopy using ocular ruler * D. Sketch drawing workshop E. The application of sampling points F. Determination of the parameters of the microclimate
2153. What are the indicators taken into account in hygienic rationing of dust? A. Chemical composition of the dust* B. fibrogenic properties of the dust* C. kind of dust * D. dispersion E. solubility F. volatility
2153. What kind of classification of pesticides: A. On the chemical composition * B. For use in the manufacture * C. Sanitary classification of pesticides * D. Processing method E. On the method of application F. By type of technique used
2154. Specify the class of pesticides by volatility: A. Very dangerous * B. Dangerous * C. Low hazard * D. Non-hazardous E. No severe volatility F. Non-volatile
2155. Name the 3 stages of work in the application of pesticides: A. Preparation * B. Basic * C. Final * D. transportation E. storage F. Check the efficiency of
2156. Specify the categories of persons who are prohibited from working with pesticides: A. Female after 50 years, the men after 55 years * B. Pregnant and lactating women * C. Persons under the age of 18 years * D. Do not have the agronomic education E. Women with children F. Waterer
2157. Specify the requirements for release of pesticides from the warehouse A. Issue of pesticides only by written permission of the head of households * B. Maintenance of strict accountability receipts and expenditure of pesticides in a special * C. Containers of pesticides should be fixed * D. The presence of the special issue. transport E. Holiday party, a specialist in plant protection F. Holiday party passed the medical check-up
2158. List 3 kinds of basic legal documents regulating the work with pesticides: A. SanPiN 0028-94 "Sanitary rules and hygienic standards in use, storage and transport of pesticides in the economy of Uzbekistan" * B. List of chemical and biological plant protection products authorized for use in the Republic of Uzbekistan for 199820-02gg. * C. SanPiN 0059-96 "Gig. Classification of pesticides for toxicity and danger" * D. SanPiN 0058-96 "Sanitary norms of microclimate of production premises" E. SNIP 2.01.0597 "Heating, ventilation and air conditioning" F. SNIP 2.09.0495 "Administrative, everyday buildings"
2159. Name of the method used for biological plant protection: A.Application antagonists parasite (entomophagous) * B. The use of biological pesticides (based on microorganisms and their metabolic products) * C. Application phenomena (chemical little biologically active substances produced by insects) * D. The use of herbal concoctions E. The use of synthetic pesticides A. If the use of dimensional resin
2160. What kind of dynamic performance on the degree of involvement of muscle groups? A. Total (more than 2/3 of the working muscles) * B. Regional (1/3 to 2/3 of the muscles) * C. Local (less than 1/3 of the muscles) * D. Light (part of the hands) E. Average (part of trunk muscles) F. Severe (involvement of muscles of the shoulder girdle)
2161. Name the 3 stages of physiological research: A. Before work * B. While working in speaker * C. At the end of * D. Every hour of work E. Every 2 hours of F. Before the lunch break
2162. What kind of concepts O2 consumption by the body when using A. Oxygen request * B. Oxygen ceiling * C. Oxygen debt * D. Aphenomenon Linhart E. O2 consumption after work F. O2 consumption to work
2163. Select the category of physical work on the severity, taking into account energy consumption A. Lightweight physical work (1a, 1b) * B. Work of moderate severity (2a, 2b) * C. Heavy (3) * D. Total (3) E. Regional (2) F. Local (1)
2164. What methods and techniques for the diagnosis of fatigue A. Subjective symptoms of fatigue * B. Change in labor productivity * C. Physiological changes changes in the functions of organs and systems * D. Level of occupational diseases E. The level of overall morbidity F. The structure of overall morbidity
2165. What are the physiological criterion of work intensity: A. Hidden response time * B. Heart rate * C. Proof-test * D. The presence of problematic situations E. IOC F. MAUD
2166. What are the sequence of key documents at the conclusion of the examination of projects of industrial facilities: A. State of the CSES * B. KVM * C.Orders + RU * D. Guests E. Guests ABT F. Instructions for the protection of labor
2167. What are the main indicators pertaining to the SPZ: A. Productivity * B. Grade Phrases * C. The power of work * D. The number and nature of hazardous substances released in the production E. Type of performance F. The area of the village
2168.What kind of parameters when selecting a water source A. Depth of the surface water source * B. Type of source and output * C. Quality of water * D. The direction of the pond E. The amount of water used for the technological and economic drinking needs F. The volume of the SPZ
2168. Specify the wording of the conclusion of the project? A. Project agreed upon subject to the corrections and comments referred to in the conclusion * B. Project agreed upon by the corresponding sanitary requirements * C. Project is approved, the corresponding hygiene requirements * D. The project can be submitted for re-examination after the removal of the above comments E. The project is not approved and must be reconsidered F. The project has not been agreed but the relevant requirements of sanitary legislation
2169. Specify the requirements for the sanitary inspection of projects domestic premises: A. Matches a set of projected general and special domestic premises allowing for the production * B. Matches lighting, ventilation, heating requirements of the building codes * C. Matches a set of household facilities and equipment, depending on the form of ownership * D. Compliance with a set of domestic premises and equipment, taking into account the number of storeys of the building enterprise E. The adequacy and accuracy of relative position of the equipment closets, showers, washrooms and others. F. Compliance with a set of domestic premises and equipment, taking into account the mode of organization and operation of the enterprise
2170. Specify a group of documents to ensure regulatory and safety conditions and organization of work A. Basic * B. Criminal procedure * C. Departmental * D. National regulations E.Feasibility F.Regulatory guidance
2171. Nazovite3 basic legal documents (if the sequence of importance) A.The Constitution of Ruz * B. Labour Code Ruz * C. Law on "The protection of citizens' safety" * D. CGSEN E. SNIP F. SanPiNs
2172. What are the basic laws of
2173. What kind of national sanitary standards A. SNIP * B. Sanitary norms and rules SanPiNs * C. Guests * D. The optimum level of illumination E. Tivity rest F. The degree of work
2174. way heat dissipation body A. Convection * B. Radiation * C. Potoisparenie * D. The loss of chlorides E. Pulmonary ventilation F. urination
2175. conditions are taken into account in the normalization of the microclimate A. Season (cold, warm) * B. Brunt of the work * C. Optimal and acceptable microclimate parameters * D. Intensity of work E. Duration of working time F. Interchangeability
2176. Specify the path of the heat transfer under optimal weather conditions orgzma: A. Convection 30% * B.Radiation + 45% * C.Potoisparenie25% * D. Loss hloridov15% E. Pulmonary ventilyatsiya25% F. Increase vodopotrebleniya15%
2177. of infrared radiation A. Radiation is caused only by the state of the radiating body and does not depend on the environment * B. C increase in temperature of the radiating body radiation power increased proportionally 4 degree of absolute temperature * C. The product of the absolute temperature of the emitting body to the wavelength of the radiation is a constant * D. With decreasing temperature thermal radiation increases E. Increasing air velocity reduces radiation F. A rise in temperature of the surrounding surfaces radiation increases
2178. What kind prof.patologii that may arise under the influence of microclimate heating A. Hyperthermia * B. Convulsive disease * C. Heatstroke * D. Elektrooftalmiya E. Graves' disease F. collapse
2179.Name 3 of the disease, figures that rise under the influence of microclimate heating A. Gastrointestinal diseases * B. Diseases of the CAS * C. CNS diseases * D. Thyroid dysfunction E. Diseases of the musculoskeletal system F. Renal dysfunction
2180. Name 3 events at work in the cold season toOutdoors A. PPE (hat, warm clothes and footwear) * B. The presence of special spaces for heating working * C. Hot food * D. automation E. Check-ups F. specialist. transport
2181. Specify the type of drinking solutions recommended by the action heating Climate A. Carbonated water containing 0.5% NaCl * B. Ira * C. Cooling green tea * D. Cooled boiled water E. Coca Cola F. Chilled tap water
2182. Name 3 events at work in the cold season to Outdoors: A. PPE (hat, warm clothes and footwear) * B. The presence of special spaces for heating working * C. Hot food * D. automation E. Check-ups F. Special vehicles
2183. What kind of preventive toxicology A. Production * B. Food C. Utilities * D. Industry E. General F. Theoretically
2184.Specify the routes of chemicals at work A. Inhalation * B. Via intact skin * C. Via the mouth * D. Through broken skin E.With special pollution. clothing F. When smoked
2185. What are the stages of standardization of chemicals in the working area: A. Base predpolozhimoe harmless amount (BLS) * B.Base + SEM * C. Introduction of changes in the MPC * D.Evaluate the high setting poisoning E. Assess the High setting in the body F. Identify ways to release toxins from the body
2186. principles of normalization of chemical factors: A. Determination of the norm of chemicals * B. Determination harmless level (threshold effect) * C. To take medical and biological indicators * D. Risk assessment otravlyaemosti E. Multiplicity of occupational poisoning F. The development of pathogenic (profilaktichkoy) therapy
2187. Specify the group of organic solvents at the boiling point A. Volatile * B. Sredneletuchih * C. Low-volatile * D. Non-volatile E. Volatile F. Non-volatile
2188. Name of organization conducting certain chemical in the air veschestvv industrial objects A. Laboratory centers san.- epidemiological surveillance * B. Laboratory industry * C. Laboratory and departmental orders. epidemiological. Service * D. Laboratory joint ventures E. Private laboratories F.Laboratory hygiene departments
2189. What are the conditions that determine the frequency of sanitary and hygienic air control A. From the hazard class of chemicals * B. By the process * C. From emergency situations * D. The physical factor E. On the method for determining the F. On the strength of the external environment
2190. Name 3 method of sampling the air for chemical analysis A. Suction * B. Weight * C. Express method * D. vacuum E. One-stage F. chemical
2191.List requirements for methods of control of chemical substances in the working area A. High sensitivity * B. Selectivity * C. Specificity in the presence of other substances * D. The maximum error of no more than 50% E. Compulsory registration of data F. Stability of reagents used
2192. Name the 3 types of vibration per person: A. Mode of transmission * B. In the direction of action * C. On the temporal characteristics * D. By type of production E. On the contact duration F. By a combination with other factors,
2193. Specify the type of unstable general and local vibration A. Fluctuating in time * B. Intermittent * C. Pulse * D. constant E. General F. Local
2194. What are the general categories of vibration source education A.Transport * B.Transport and technology * C.Technology * D.Vertical E. Horizontal F. Mixed
2195. What kind of whole-body vibration, classified by frequency A. Low frequency * B.Medium * C. High* D. The microwave E.Superhigh F.Axial over 500 Hz
2196.What kind of local vibration frequency: A.Low frequency of 8-16 Hz * B. Medium 31,5-63 Hz * C. High-125, 250, 500 Hz or more * D. Superhigh 500 Hz E.The microwave more than 1000 Hz F. Axial 1200Hz and more
2197. Specify the device used for the determination of functional changes produced in the body as a result of vibration: A.Vibrotestr * B. Tremometr * C. Capillaroscope * D.Hronorefleksometriya E.ventilation F.Adaptometer
2198. Specify the values of the device in the production of sustainable lighting A. Hygienic * B. Technology * C. Economical * D. Social E. Therapeutic F.Recruitment
2199. Specify the main indicators characterizing lighting fittings: A. Light flux Lumen * B. Luminous intensity Candela * C. Illumination, Suite * D. Brightness, Candela / m2 E.Koefftsent umenshayushee luminous flux% F. Light velocity in km / sec
2200.What kind of lighting production by source: A.Estesstvenno * B.PU * C. Combined * D.Side E. Combined F. Reflected
2201. Specify the lack of production of natural lighting: A. Unevenness * B. Thermal heating * C. Inability to redistribution of the luminous flux * D.Low profitability E. Glare F. High brightness
2202. Specify the advantages of artificial light sources A. Possibility of equipment in all manufacturing processes * B.Independence from the climate and the time of day * C.Possibility of redistribution of the luminous flux * D. security E. Uneven illumination F. The creation of small levels of illumination
2203. Specify the lack of artificial lighting production A. It is different from the spectral composition of natural light * B. High brightness, and heated property * C. Risk of damage from electro * D. Economic costs E.The difficulty of monitoring F.Uneven distribution
2204.Name 3 sources of artificial lighting in the production of: A. Incandescent lamps * B. Fluorescent lamps of low pressure * C. Fluorescent lamps High pressure * D. Xenon E. Halogen bulbs F. Sodium lamps
2205. Specify the system of artificial lighting: A. Total * B. Local * C. Combination * D. Mixed E. Specific F. Uniform
2206.Name the 3 types of lamps for light distribution A. Direct light * B. Reflected light * C. Scattered light * D.localized E. uneven F. uniform
2207. What are the conditions for determining the stability coefficientclear vision A.Vision time * B. Time not seeing * C. Time experience * D. The duration of the working day E.The category of work F. Light source
2208. Specify the main parts of the light meter A. Receiving part (photocell) * B. Extension on the photocell * C. Recording (galvanometer) * D. Reflecting E. Design F. Regulating
2209. What characteristics when evaluating lighting estesstvenno coverage: A. Illumination light meter measured both at the workplace and outside the building * B. Obtained data were used to calculate KEO * C. At calculated KEO except light meter data take into account the ratio of luminous flux * D. Opredilyayut brightness E. Calculate the ratio of the light (CK) F. Opredilyayut reflection coefficient
2210. Name 3 of the method of calculation of lighting fixtures created general lighting in the examination of the project: A. Point method * B. Watt method * C. Coefficient method * D. Subjective method (fatigue) E. Photometric method Koeffitsient use F. An objective method
2211.for what purposes the ventilation A. To fight against dust * B. To the control of harmful vapors and gases * C. For controlling excess heat and moisture * D. To deal with infrasound E. For controlling the laser radiation F.To combat fatigue
2212.Po some indicators classified ventilation A. On stimulus * B. On the principle of operation * C. On the site of action * D. For fan power E. By type of deflectors F. For the construction of local exhaust devices
2213. Specify disadvantages aeration A. No air preparation * B. Control difficulty * C. Can not clean the exhaust air * D. Low efficiency in the cold season E. Difficulty in combination with mechanical ventilation F. A significant high cost of the device
2214. Specify the lack of mechanical. ventilation A. Considerable material costs * B. Complexity of the device * C. Noise and vibration in the shop * D. Difficulty in managing E. Low efficiency of dust control F.Does not provide the balance of air
2215. Name the 3 types of air pressure in the air duct A. Static * B. Dynamic * C. Total * D. Mechanical E. Lifting F. Turbulent
2216. Ukazhite requirements for sanitary inspection of ventilation projects A. The corresponding ambient air hygiene. requirements and standards * B. Feasibility of existing ventilation systems * C. Feasibility of design solutions mechanical ventilation * D. Obligatory ensure a positive balance of air E. The air supply from the top down F.A combination of air heating
2217.Specify the hygienic requirements for ventilation A. Must be effective * B. Is not to be a source of other hazards * C. Shall not pollute the environment * D. Must be high E. Should be economical F. Be easily controlled
2218. Specify the index indicating the frequency of monitoring the state of ventilation A.By the dangers related substances 1 and 2 Class 1 per month* B. Having a local ventilation system 1 per year * C. By the dangers related substances 3 and 4 class 1 time in 3 months * D. 1 time per month E.Order the quarterly change F. In 3-shift operation 2 times a year
2219.Specify the type of work, accompanied by a loud noise in excess A. Test engines * B. Plasma welding * C.Riveting work * D.Machining of parts E. Painting works F. Sewing workshop (Ind. Sewing)
2220. What are the physical indicators characterizing noise unit measurement used to evaluate it A. Frequency Hz * B. DB noise intensity, W / m2 N / m2 * C. Volume background, dream * D. Wavelength m E.Amplitude cm F.Speed m / s
2221.Name the 3 groups of non-permanent noise A. Intermittent * B. Koleblyayuschiysya Time * C. Pulse * D. chaotic E.Superstrong F. messy
2222. What kind of noise frequency, commonly used in hygiene practices A. Low frequency up to 400 Hz * B. Medium 400 1000Hz * C. High frequency 1000 Hz * D.Low frequencies up to 200Hz E. Harmonic whole spectrum F. Over a high-frequency 2000Hz
2223. Name 3 of the body, the most altered by noise A.Sound Analyzer * B. CNS * C.SSA * D. endocrine system E. The vestibular apparatus F. Hematopoietic system
2224. List the three main types of PPE A.Antiphons * B. Headsets * C. Helmet with headphones * D.Boots E.overalls F.protective glasses
2225. What is involved in CH 003 294 at gig.normirovanii infrasound (3) A.Spectral composition * B.Temporal characteristics * C. Level temperature * D. Area workshops, booths E.Period of the year F.Times of Day
2226.List the three main types of PPE A.Antiphons * B.Headsets * C. Helmet with headphones * D. Boots E.overalls F.protective glasses
2227. production process using ultrasound A. Ultrasonic soldering, tinning, welding * B. Drilling, cutting, gravirovka.defektoskopiya * C. Degreasing parts, oxidation and destruction of joints org * D.drying E. Painting F. Polishing
2228. Specify the effect of the action of ultrasound when used A. Mechanical * B. Thermal * C. Physics Chemistry * D.light E. Hydrolysis reaction F.induction
2229.Specify the intended use of ultrasound in medicine A. Deep heating of tissues * B. Diagnostics of diseases * C. Sterilization of plasma expanders and blood serum * D. Cataract E. Treatment of keratitis F.Prevention of decompression sickness
2230.zones, which are formed around the source of radiation of EMF A. Near zone or zone induction, its radius is equal to half the wavelength * B.Intermediate zone - the zone of interference * C. Dalnyayavolnovaya area * D.A zone of reflection E. Resonance zone F. Zone reverberation
2231.List the three basic units of power EMPR usedin gig.praktike A. HF and UHF electric field V / m * B. HF and UHF magnetic field A / m * C. Range SVChplotnost energy flux W / m2 * D. In the range IKizlucheniya W / m2 E.In the range UFizlucheniya W / cm2 F. In the range of x-ray radiation rad / sec
2232 What documents are fundamental legislative documents: A.The Constitution of the Republic of Uzbekistan * B.Labour Code * C. Act Gossannadzor * D.instructions E.guidelines F.SNiPy
2233. What documents are normative legislative documents: A. GOST OSSS * B. SNIP * C. Act Gossannadzor * D.Recommendations of healthy lifestyle E.instructions F.akty
2234. What kind of sanitary surveys on controlled objects you know: A. Case * B.screening (control) * C.scheduled (depth) * D.kollektivnye E.free F.vneplanovye
2235.The main tasks of occupational health: A. creating optimal working conditions * B.reduction of morbidity * C.increasing productivity * D.likvidatsiya occupational diseases and occupational poisoning E.The fight with noise, vibration and UFOs F.The fight with a chemical factor
2236. The main methods of occupational health: A. hygienic * B. saline * C. laboratory instrumentation * D.chemical E.technological F.physical
2237. Legislative documents in the field of occupational health and safety: A. Basic * B. Regulatory * C. instructional methodology * D.vedomstvennye E.sluzhebnye F.legal
2238. Which listed companies the dust is not the leading factor of production: A.Company Communications * B.Printing * C. chemical plants * D.gornodobyvayuschaya Industry E.tekstilnye production F.mebelnoe production
2239. What kind of PPE is not used for respiratory protection against dust: A. Earplugs * B. mesh points * C. antiphons * D.respiratory E.marlevye bandages F.mask
2240. How is classified overall vibration: A.transport * B.transport and technology * C. technology * D.vibratsiya the horizontal and vertical axes E.vibratsiya workplace F.Mechanical
2241. is divided into frequency groups, except: A. Medium * B. UHF * C.Superhigh * D.vysokochastotny E.nizkochastotny F.average
2242.What are the stages of work with pesticides should be used PPE: A. on the preparation * B.at mainly * C. on the final * D.with the use of pesticides 1 and 2 hazard class E.on request workers F.Do not apply
2243. Specify the PPE from the effects of industrial noise: A. Headphones * B. Antiphons * C. Earplugs * D.marlevye bandages E.schitki with filters F.respiratory
2244. In which industries may impact climate cooling: A. Refrigeration * B.Shipbuilding * C. work outdoors in the winter * D.mebelnyh E.and Metallurgical F.kuznechnyh
2245.What are the instruments needed to determine the dust content by weight: A.aspirator * B.AFA filters rider * C.analytical balances * D.okulyar micrometer E.oscilloscope F.lyuksmetr
2246. What specific factors related to the application of lasers: A. direct reflection * B. specular reflection * C. Laser radiation * D.Voltage eye and ear E.f noise and vibration F.humidity
2247.What is primarily attributable to non-specific factors in the application of lasers: A. Dust * B.infrared * C. chemical factor * D.vynuzhdennaya working posture E.organic solvents F.noise
2248.To the device for the complete characterization of industrial noise include everything except: A. Aspirator * B.Microscope C. barometer * D.shumomer E.spectrum analyzer F.microphone
2249. What changes occur in the body when exposed to heating microclimate: A. increase in skin temperature and body * B. sweating * C. tachycardia * D.is the temperature of the body does not change E.bradikardiya F.asphyxia
2250. What are the methods of biological control used in agriculture: A. plus Application entomophages * B. microbiological preparations * C. pheromones * D. pathogenic bacteriaconditionally E.opylivanie, soil F.split
2251. Periods for physiological research: A. before starting work * B.during operation * C.after work * D.in the middle of change E.through every 2 hours work F.every week
2252. What distinguishes modes of work and rest: A.DSA * B.Weekly * C.Annual * D.vahtovoy E.semichasovoy Time F.monthly
2253. The main goals of physiological studies include everything except: A. rationalization of lighting and mechanical ventilation * B. development plan for medical examinations * C. development briefing * D.estimates severity and intensity of labor E.profilaktiki fatigue F.assessment functional state
2254. Specify the PPE that are not related to the means of eye and face protection: A. earplugs * B. antiphons * C. respirators * D.protective glasses E.schitki with a light filter F.schitki
2255. List the changes occurring in the body operating at high temperatures: A. increase in skin temperature and body * B. sweating * C. tachycardia * D.bradikardiya E.Decrease in skin temperature F.tremor
2256. Voltage, what muscle groups are not observed during the thinning of cotton: A. lower extremities * B.stop * C. forearms * D.spins E.kistey hand F.legs
2257.Factors have a permanent effect on the workplace of machine, except: A.Plus Noise * B. electromagnetic fields * C.emotional stress * D.meteofaktor E.traffic fumes F.vibration
2258. Sequence of action on occupational health physician at the screening sanitary inspection of the property: A.notify the administration * B. verify the prescription * C.write a document * D.provesti med.osmotr E.provesti san.-clearance work F.instruktazh
2259.Sequence of action on occupational health physician at the closing of the property: A.award decision CGSEN administration * B. cash on printing * C. writing act * D.translation working on another job E.nalozhenie printing warehouses F.provesti med.osmotr
2260.When investigating complaints about dust from the public find out, except for: A.the presence of treatment facilities * B.uptake in the public health institutions * C. the power of the enterprise * D.sufficiency of the SPZ E.zamerit concentration of dust in the area of residence F.values SPZ
2261. Which of the following preventive measures are not the most radical steps to reduce the infrared radiation on the job: A.drinking regime * B.work and rest * C. medical examinations * D.mechanization E.ekranirovanie F.germetizatsiya
2262. Steps for hygienic evaluation of the content of dust in the working area: A.learning process * B.Checking apparatus* C. drawing the sketch * D. sampling * E.Carrying out of san F.clearance. Works G.instruktazh
2263.What you need to know to fully assess the hygienic production of vibration: A. Type of vibration * B. intensity and frequency * C. Heading axes * D.the degree of the applied force E.action on the body F.meteofaktor
2264. The most rational sequence of the proposed measures to combat industrial vibration: A. predsannadzor when designing new equipment, technologies, tools * B. sanitary * C. health prevention * D.Application antiphons E.profilakticheskoe food F.san-clearance work
2265. Specify the correct sequence of steps work on the hygienic assessment of chemical factors in the working area: A.learning process * B.drawing the sketch * C. sampling and analysis * D.Delivering samples CGSEN E.san-clearance work F.instruktazh
2266. If no trades have the low atmospheric pressure: A.Geologists * B.pilots * C.shepherds * D.When working in remote locations E.with underground work F.mediki
2267. What determines the choice of category of visual work: A. lightness background * B.plus the size of the object of discrimination * C. contrast * D.singularities process, profession E.opasnostyu injury F.test visual analyzer
2268. If you spill leaded gasoline necessary measures: A. rinse with water * B. rinse with pure gasoline * C. fill any oxidant * D.provesti briefing E.prekratit work for 3 days F.Close space
2269. What is not regulated by the order №300: A. work experience * B. sex workers * C. contraindications * D.type harmful factor E.multiplicity CSI F.profzabolevaniya
2270. When hygienic rationing artificial lighting does not take into account: A. voltage level of the body * B.the length of the working day * C.brightness of surrounding surfaces * D.accuracy visual work E.kontrast distinguish an object with the background F.the category of work
2271. How fixtures are classified on the distribution of luminous flux: A. direct light * B.scattered light * C. reflected light * D.closed type E.GEN type F.Emergency
2272. Background lightness which is included in the standardization of lighting on the working light: A. Light * B.middle * C. Deep * D.big E.small F.accurate
2273. Types of industrial lighting: A.PU * B. Natural * C. combined * D.Emergency E.dezhurnoe F.physical
2274.What determines the choice of light sources and luminaires type: A. nature of the work * B. environmental conditions * C. level normalized illumination * D.Special requirements and painting facilities and equipment E.technological process F.by results med.osmotrov
2275. main groups of legislation, which is conducted on the basis of TSN: A. Act Gossannadzor * B. Sanitary norms, rules and hygienic standards * C.The position of the Centers Stete sanitary supervision * D.administrativnye E.ugolovno procedural F.ugolovnye
2276. Specify the main groups of research methods used in the in-depth san.obsledovaniya: A. Statistical * B. laboratory - instrumental * C.sanitary description * D.functional diagnostics E.UZI F.physiological
2277.Specify the controlled objects, which is drawn up in-depth san.obsledovaniya: A. Company vehicles, communications * B. Industrial Company * C. agricultural production facilities * D.financial and economic institutions E.LPU F.Children Institutions
2278.List the form of records of the SPE CGSEN: A.305 / u - PSN Card for the object being built * B.303 / u - the conclusion of the project * C.301 / y - an opinion on the allotment of land * D.330 / Y - the study protocol air E.334 / Y - noise measurement protocol F.336 / Y measurement protocol meteofactors
2279. What are the main problems to be solved when san.nadzore during construction: A.determine whether the progress of construction of the project * B. the implementation timetable * C. control of the builders working conditions * D.power mechanization E.compliance work and rest F.control of med.osmotrom
2280. Specify the requirements for the projects san.ekspertize domestic premises: A.matches a set of projected general and specific household premises * B.matches lighting, ventilation and heating requirements of the building codes * C.sufficiency and accuracy of mutual location and equipment closets, showers, washrooms and others. * D.Meet set domestic premises and equipment, taking into account the number of storeys of the building enterprise E.Meet set domestic premises and equipment, taking into account the mode of organization and operation of enterprises F.power companies
2281. List of production, where the meteorological factor is one of the leading: A.paengineering, thermal management * B. refrigeration production * C. agriculture * D.poligraficheskoe production E.avtoremontnye enterprise F.medicine
2382.In case of unfavorable microclimate medical and preventive measures should include: A.rational drinking regimen * B. PPE * C. periodic medical examination * D.automation E.rational ventilation F.germetizatsiya
2383. Types of sanitary surveys physician CGSEN: A.plan - depth * B.Full * C. Case * D.on request administration E.by checking san.-clearance. Works F.vneplanovye 2384. The basic documents used during the PSN for new equipment, technology and chemicals: A. GOST OSSS * B. passport data on new chemicals * C. SanPiNs on harmful and hazardous factors * D.instructions E.prikazy F.Specifying
2385. Building codes (CMC), often used in the examination of projects: A. production, administrative and utility buildings * B.natural and artificial lighting * C. Heating, ventilation and air conditioning * D.Construction Materials E.laboratornye premises F.meteorologichesky factor
2386. Types of dynamic work on the degree of participation of different groups of muscles: A. Heating, ventilation and air conditioning * B. Heating, ventilation and air conditioning * C.Heating, ventilation and air conditioning * D.is the average work (part of trunk muscles) E.Heavy work (participation rotator cuff) F.Easy operation (participation muscles of the hand)
2387. Mental work is divided into the following types: A. work of the remote control * B. operator activity * C. intellectual work * D.work monotonic E.INDEXING work F.konveyernaya
2388. Indicators used to study the CAS: A. frequency pulse * B. Blood Pressure * C. stroke and minute volume of blood * D.venoznoe pressure E.state capillaries F.leykotsitarnaya formula
2389. Devices that are used to study the CAS: A. Heart rate monitor * B. SAW * C. formula Starr * D.kapillyaroskop E.gemoglobinomer F.UZI
2390.Name san.-shaped skylight. Hours: A.stained glass windows * B.booklets and posters * C.sanitary hygienic propaganda and mandatory training of workers in accordance with the profession * D.lektsii and conversation E.preparation of public orders. Instructors F.mitingi
2391. What is the criteria to ergometric severity of labor: A. working posture * B. the value of cargo * C. the power of work * D.minutny breathing volume E.is the number of completed product F.pulse
2392. What is the criteria to ergometric work intensity: A. Video visual works * B.monotony * C. density signals * D.neudobnaya and forced working posture E.no natural light in the room F.working position
2393. Specify the objectives of occupational health CGSEN: A. creating optimal working conditions * B. reduction of morbidity * C. increasing productivity * D.likvidatsiya prof. diseases and prof. poisoning E.gigienicheskaya assessment of new substances chemical and biological origin F.gigienicheskaya evaluation premises
2394. What changes occur in the body during cold exposure? A. narrowing of the superficial and deep vessels * B. tachycardia * C.reduction of blood pressure and metabolism * D.the restriction of peripheral vascular E.uchaschenie breathing F.potootdelenie
2395.Indicators normal conditions: A.200C temperature * B.atmospheric pressure of 760 mm Hg. Art. * C. atmospheric pressure over 760 mm Hg. Art. * D.teply season E.is the temperature of air over 250C F.150C is the temperature of air
2396. Optical radiation: A. Infrared * B. visible * C. UV * D.radiovolny industrial frequency E.kosmicheskie F.elektromagnitnye
2397. Instruments necessary for aspiration sampling method: A. Aspirator * B. Absorber * C. absorption device * D.Vacuum pump E.reometr F.psihrometr
2398.Production classification divides pesticides into groups: A.Insecticides * B.herbicides * C. rodenticide * D.pin E.letuchie F.prozrachnye
2399. Specify the device efficient lighting in industrial premises: A.Hygienic* B. technology * C. economical * D.to improve subjective feelings E.State F.legal
2400. Basic lighting units, characterizing lighting A. Light flow * B. brightness * C. Illumination * D.silyl sound E.power F.amplitude
2401.Functions of the body, a condition which depends on the light: A. bandwidth of the visual analyzer * B. visual acuity * C. resistance clear vision * Dtravmatizm E.slepimost F.myopia
2402. The basic methods of assessment of the functional state of the visual analyzer: A. resistance clear vision * B. bandwidth of the visual analyzer * C. critical flicker fusion frequency of light * D.latentny during the heat E.slezotechenie F.slepimost
2403.Data to determine the stability coefficient of clear vision: A.Vision time * B. time not seeing * C. time experience * D.Duration workday E.razryad work F.the category of work
2404. Harm, to combat which organized ventilation: A. excess heat * B. excess moisture * C. noxious fumes (gases) and dust * D.radiation E.noise F.vibration
2405. For what purposes the ventilation: A. to the control of harmful vapors and gases * B. to fight against dust * C. to the control of harmful vapors and gases * D.to combat infrasound E.to fight against laser radiation F.to combat EMPR
2406. What are the indicators classified ventilation? A. on stimulus (mechanical, natural) * B. on the principle of action (extraction, air-jet) * C. on the site of action (local, total) * D.by fan power E.by mean deflectors F.by reason
2407. Systems technology (technical) measures to prevent exposure to harmful factors: A. Automation * B. Integrated Mechanization * C. sealing * D.SIZ E.Ventilation F.Mode Work and rest
2408 Conditions for the aeration device: A.single-storey building * B. height of the building is not less than 10-12 m * C.plus the existence of two rows of windows in the longitudinal walls of the building * D.is the height of the building does not matter E.mnogoetazhnoe building F.availability ducts
2409.Advantages of mechanical ventilation: A. possibility of preparing the air before it enters the shop * B.It is equipped to deal with any harmfulness * C. Air treatment before being discharged into the atmosphere * D.perfect not pollute E.Don't give related hazards F.the possibility of air recirculation
2410. Disadvantages of mechanical ventilation: A. considerable material costs * B. complexity of the device * C.noise and vibration in the shop * D.weak efficiency for dust control E.It depends on the time of year F.maloeffektivnaya
2411. Types of air pressure in the duct: A.Static * B.Dynamic * C.total * D.podemnoe E.Mechanical F.physical
2412. Basic requirements for the ventilation san.ekspertize projects: A. matches the designed parameters of ambient air hygiene requirements and standards * B. feasibility of the designed ventilation systems * C. feasibility of design solutions mechanical ventilation * D.podacha air from the top down E.sochetanie air heating F.Meet with lighting norms
2413. The basic elements of mechanical ventilation: A. place the fresh air intake and preparation * B. fan * C. ducts in the shop * D.is the height of the building E.vodyanye sprinklers F.panels
2414. Reasons for inefficient operation of ventilation: A. improperly selected air intake * B. irrational system of ventilation and air flow unprepared * C. lack of performance * D.no heating E.availability heating F.no lighting
2415. Regulations for evaluating the effectiveness of the device and the ventilation systems: A. SanPiN № 0203-06 «microclimate of industrial premises" * B.GOST 12.1.005-88 "General hygiene requirements to the working zone" * C. SNIP 2.04.05-97 "Heating, ventilation and air conditioning" * D.Ministry of Health of the Republic of Uzbekistan -Prikaz number 300 E.Gigienicheskaya Classification F.SanPiN № 0120-01
2416. Types of structures of local exhaust ventilation: A. hood * B. extractor hood * C. Onboard suction * D.Insulated workplace E.deflector F.fan
2417.Criteria for frequency of monitoring of the ventilation: A. for substances hazard class 1.2 - 1 per month * B. Where are local ventilation systems - 1 per year * C. for general ventilation system - 1 time in 3 years * D.with the presence of the PP - monthly E.at a convenient time F.by agreement Company
2418.Specify the main elements of the control of harmful substances in the working area: A.chemical analysis of pollutants * B. the analysis of the results and drawing conclusions * C. development of health measures * D.Drawing up of the collective agreement E.Drawing up the plan-task F.instruktazh workers
2419. Equipment for air sampling: A.glass vessels * B. Filter materials (AFA, FPP etc.) * C. adsorbents (activated carbon, silica gel) * D.shlangi E.Plastic bags F.pumps
2420. The methods most often used for the analysis of air samples in the chemical content: A. optical (colorimetry, spectrometry, etc.). * B. electrochemical (polarography, potentiometry, etc.) * C. chromatographic (liquid, gas, paper, thin-layer) * D.raschetny E.comparative F.physiological
2421.Types of chromatography for the analysis of air samples: A.zhdkostnaya * B. gas * C. thin layer * D.No matter the form chromatography E.Small F.powder
2422. Situations where a person may have an impact chemicals: A. during production * B. at home * C. for contamination of environmental objects * D.with reception food E.with smoking F.with bathing
2423.What kind of sanitary regulations of chemical substances: A.MAC * B. LC (lethal concentration) * C. LD (lethal dose) * D.heart rate E.Duration workday F.arterial pressure
2424. Basic ways of allocation of chemical substances from the body: A. hair B. leather (sweat and sebaceous glands) * C. intestines * D.salivary glands E.with contact F.When eating
2425.Types of electoral Organotropona steps: A.Neurotropic * B. Hepatotropic * C. cardiotoxic * D.vliyanie blood E.vliyanie on the skeletal system F.vliyanie a function of
2426.Main production where possible the impact of lead on working: A. smelting of lead * B. manufacture dyes lead cable lead screens and their use * C. printing * D.obuvnaya Industry E.clothing industry F.medicine
2427. Group facilities where mercury is widely used: A.getting mercury pyrometallurgical * B. instrument * C. production of mercury fulminate * D.remontnye work E.road works F.medicine
2428.Which bodies are not carried out according to the constitution the supreme supervision over the implementation of labor laws: A. Ministry of Health * B.Ministry of Social Welfare * C.prosecuting authorities * D.Attorney -General E.TSGSEN, Ministry of Labour F.MIA
2429.The factors do not affect the health: A.the number of medical institutions in the area * B.The population density in the territory of residence * C. the number of children in the family * D.are the natural E.Social-economic F.Social
2430. Which of these reasons, the least impact on the incidence of work: A. diet food * B.plus the existence of the medical unit * C. material security * D.Professional affiliation E.working conditions F.the presence of harmful factors
2431. Specify the physical factors: A. working environment * B.EMF * C. industrial noise * D.mikroorgnanizmy E.Voltage labor F.tyazhest labor
2432.List the symptoms of allergic effect of: A. hay fever * B. allergic rhinitis * C. Urticaria * D.ORVI E.infection F.keratit
2433. Situations in which pesticides affect humans: A. for application * B. via contaminated objects of the environment * C. when operating in the treated fields * D.not the last instruction E.at random situations F.When eating
2434. Name the form of pesticides: A. Solutions * B. Pellets * C. powders (dusts) * D.smesi E.mazi F.Capsules
2435. Specify the basic rules of safety at the preparatory stage: A.Use only approved drugs in Uzbekistan ("List") * B. tolerance people have passed a medical examination and special training * C. maintenance of personal protective equipment * D.Accounting seasonality works E.healthy lifestyle F.dieticheskoe food
2436.Categories of persons who are prohibited from working with pesticides: A.positive women after age 50, men over 55 years old * B. pregnant and lactating women * C.persons under the age of 18 * D.not with agronomic education E.Face older than 20 years F.proshedshie briefing
2437.Specify the requirements for the release of pesticides from the warehouse: A. issuance of the written consent of the head * B.keeping strict records income and expenditure of pesticides in a special * C.issue of the presence of special transport * D.vydacha only familiar faces E.vydacha higher management F.vydacha all
2438.Types of biological pesticides: A.Microbiological * B. fungal * C. antibiotics * D.udobreniya E.minerals F.gerbitsidy
2439. Name microbiological pesticides: A. bacterial * B. virus * C. toxin * D.Mineral fertilizers E.antibiotiki F.insektitsidy
2440.List the activities related to the organizational and methodological: A.drawing up of plans and reports * B.preparation of certificates and letters * C.meetings and seminars * D.preparation materials for the imposition of fines E.control over the conduct med.osmotrov by order №300 F.the organization of the SPE
2441.List the units, neotnosyaschiesya to vibration velocity: A. Herz * B.lumens * C. Suite * D.th / s E.dB F.m / c2
2442. Specify which devices do not apply to devices for the complete characterization of industrial noise: A. Aspirator * B. Microscope C. barometer * D.shumomer E.spectrum analyzer F.microphone
2443. What are the non-existent group of cumulation: A.Acute * B.explicitly * C. local * D.materialnoy E.functional F.physical
2444. In some cases, the doctor of Health should conduct a sanitary assessment of meteorological factors: A. complaints working * B. scheduled (depth) Health Surveys * C. investigation of cases of occupational diseases * D.Drawing up reports of occupational health department for the year E.doklad to a meeting of regional health departments F.every month
2445. For each production facility must have the following basic premises: A. Production * B. administrative * C. White * D.non-laboratory E.canteen. F.skladskie
2446.Specify the criteria, depending on which is determined by a sufficient set of sanitary A.of manufacturing processes is determined depending on the characteristics of the technological process of the enterprise * B. the number of working personnel in the greatest shift * C. the number of working women in the greatest shift * D.Domestic premises and equipment: E.is the number of occupational groups F.obёm productsis the number of shops
2447.By the use of PPE is classified: A.PPE for respiratory * B.PPE for hands and feet * C. PPE for the head, eyes * D.for each profession PPE E.SIZ By the method of cleaning F.SIZ Children
2448.To reduce the impact of noise on the body which are considered necessary PPE: A. muffs * B. "Earplugs" * C.Antiphons * D.vatnye masks E.Respiratory F.mazi
2449. Diseases caused by exposure to dust: A.Pneumoconiosis * B. respiratory diseases (bronchitis, pharyngitis) * C. non-specific diseases of the skin and organs of vision (acne, conjunctivitis) * D.gemmoroy E.onkozabolevaniya F.infectious diseases
2450.What kind of camera used in experimental research for inhalation seed: A. Pravdina * B. Latushkina * C. Boyarchuk * D.Matveeva E.Fedorova F.Ivanova
2451. What kind of device is not possible to carry out measurements of industrial lighting: A.actinometer * B. psychrometer * C.Vibration * D.lyuksmetrom U-116 E.lyuksmetrom U-117 F.lyuksmetrom
2452.What types of projects are given hygienic assessment: A. Situation and master plan * B.project lighting and ventilation * C. project household premises * D.and accounting documents E.trebovaniya to the improvement of the site F.project water
2453. With Into account the value of the distance at which the group is divided SPZ: A.1000 * B500 * C.100 * D.250 E.400 F.350
2454.What documents are not issued in the current san.nadzore: A.303 v / f * B.305 v / f * C301 v / f * D.309 V / f E.315 V / f F.307 V / f
2454. What kind of humidity: A. Absolute * B.max * C. Relatively * D.minimal E.high F.vyrazhennaya
2455.What instrument measures air temperature: A. Thermometer * B. thermographs * C. psychrometers * D.lyuksmetr E.radiometer F.shumomer
2455.Specify the devices that measure humidity: A. psychrometer Asman * B.August psychrometer * C.hygrographs * D.anemometer E.lyuksmetr F.vibrotestr
2456. What the components of U-116 light meter: A. Light sensor * B. extension * C. galvanometer * D.sensor E.antenny F.pump
2457. Nzovite measures to ensure the protection and health of workers A. Comprehensive measures * B.System of legislation * C.Departmental measures, economic and technical measures * D. Hygienic measures E. Individual prevention measures F. Arrangements
2458. Specify the type of national regulations A. SNIP, SanPiNs * B. Hygienic standards, state standards, Occupational Safety Standards * C. Instructions, guidelines * D.Basic orders, classification E. Collective agreements F. Contracts
2459.What types of measures in the Labour Code to ensure rational modework and rest A.Fixed outside working hours * B.Reduction of working hours for a number of professions and jobs * C. Paid annual extended or additional leave * D.Compliance with hygiene standards E.assessment of workplaces F.The creation of a healthy lifestyle
2460. Specify the basic right of officials, enshrined by law"On the State Sanitary Inspection" during PSN A. Prohibit the manufacture, use and sale of new products, raw materials, machinery equipment, chemicals and other non-registered in the Ministry of Health of the Republic of Uzbekistan or dangerous to life and health of citizens* B. Villa conclusions on reconstruction of objects, giving opinions on the testing of new device* C.Carrying out monitoring in the process of construction, and by the non-suspension of the construction of sanitary legislation * D. Analysis of morbidity with VUT E.Investigate prof. Poisoning F.assessment of workplaces
2461.What are the rights of officials enshrined legislation during TSN A. Visiting for the purpose of monitoring compliance with oversight san.zakonodatelstva facilities upon presentation of business card * B. Claim by officials elimination of the san.narusheny * C. Claim by officials of the necessary documentation for the sanitary-epidemiological and radiological situation, drafting a protocol in the detection of violations * D.Giving opinions on the state of the controlled object according to the requirements of SanPiN and hygienic standards, and by the non-suspension of operation E.Giving opinions on the renovation and expansion proizvodstv.obekta F.Constitute acts in the control of construction objects
2462.Thermal state of the organism A.Teplooschuschenie* B.Body temperature and skin * C. Time response to heat D.excitation E. drowsiness F.Insomnia
2463. What are the instrument for measuring microclimate parameters A.Anemometer * B. Psychrometer * C. Actinometer * D. potentiometer E. dynamometer F.Dinamorefleksometr
2464.What kind of preventive measures to reduce the impact on the bodyIR A. Shielding * B.Plus Application air dushirovaniya * C. Protection to eyes and skin PPE * D. Separate premises E.Reduction of working time F. Prohibition of employment of women
2465. What are the medical preventive measures against adverse A.weather conditionsAnd control over working conditions * B. Periodic med.osmotr * C.Rational drinking regimen and nutrition * D. automation E. The combination of professions F.Rational ventilation
2466. Specify the types of production which is the guiding chemical factors A. Main chemical industry * B. Industrial organic synthesis * C. The use of chemicals, chemical laboratory * D. clothing industry E.Textile production F.Pedagogical activity 2467.There are 3 main branches of toxicology A.Theoretically * B. Clinical * C.Prevention, military * D. Pharmaceutical E.General Toxicology F. Agriculture
2468. Specify the objectives of industrial toxicology A. assessment of toxicity of new chemical compounds * B. Hygienic evaluation process in the production and use of chemicals * C. Fixed hygiene regulations, the development of preventive measures prof. poisoning and prof. diseases* D. Development of pathogenetic therapy E.Making recommendations for the diagnosis of poisoning F. Development of methods for the determination in biological media
2469. some basic ways of allocating chemicals A. Kidney * B. Leather * C.Salivary glands, intestine * D.liver E.lungs F. endocrine glands
2470.What kind of electoral action Organotropona A. Neurotropic * B. Hepatotropic * C. Cardiotoxic * D.Impact on the skeletal system E.The defeat of the musculoskeletal system F. Eye disease
2471. Specify the type of manifestation of local action A.Flushing * B. Swelling * C. Necrosis, ulceration * D.Hyperthermia E. Pain F. secretion
2472.which group of substances according to the degree of danger according to GOST A. High hazardous * B. Moderately hazardous * C. Little dangerous * D.Vysokokumulyativnye E.Highly F.Moderately toxic G. Non-hazardous
2473.indicate toxicity criteria, which define A.Hazard Class B.MAC * C. 50 through the stomach and skin * D.LC 50 * E.The nature of the local action F. Zone specifics G. The degree of irritating effects
2474. Specify the degree of manifestation of cumulative properties A. Cumulation pronounced * B.Expressed cumulation * C.Moderate accumulation * D. Cumulation at toxic doses E. Cumulation strong F.Cumulation resistant
2475.production where possible the impact of metals on the job A.Mining and refining * B. Metal smelting * C. Getting inorganic and organic compounds of metals * D. transportation E.construction works F.storage
2476.Specify the most toxic mercury compounds A. Ply mercury (vapor) * B. Rtutnoorganicheskie connection * C. Mercuric chloride * D.Mercury sulfide E. Silicate mercur F.Metallic mercury (liquid)
2477. Specify the path demerkurializatsii premises mercury spill A. Collect spilled mercury * B. Remnants of mercury fill a strong solution of potassium permanganate or 20% FeCl3 * C. Box building workshop equipment clean superheated steam * D. The remains of mercury fill bleach E.To eliminate leaks and cracks in the walls F. A month to check the effectiveness of the measures taken
2478.Specify the requirements for equipment and facilities when working with mercury A. Equipment should be based on a space * B. Whole flooring * C.Work with mercury in a separate room * D. Work only on the top floor E. The absence of ceilings F.The surface is covered with a metal workplace
2479.production where organic solvents yavlyayutsyasya harmful factor A.Getting organic solvents * B.Paint industry * C. Industrial organic synthesis * D. Production of chemicals E. medicine F.Mining Industry
2480.What are signs of poisoning by chlorine and its compounds A.Dyspnea, cough, chest pain B. Eye irritation. dyh.putey, toksicheskiybronhit, laryngitis C. Skin irritation, dermatitis, acne, eczema D.Loss of appetite E. euphoria F.Pain in the lower extremities
2481. Symptoms of poisoning oxygen compounds of sulfur A. Irritation of eyes * B.Respiratory tract irritation * C. Influence on the blood * D.Skin ulceration E.Oligouriya F. hypotension
2482. Specify the frequency of the term san air control A. To substances with acute directional mechanism of action of the continuous automated monitoring * B.to substances hazard class 1 time in 10 days * C. to substances hazard class 1 per month * D. 1 gas erupts once a week E.Very persistent connections around the clock F.Carcinogens 1 times per shift
2483.Specify the method used to analyze air sampleschemical substances A. Optical * B. Electrochemical * C.Chromatographic * D.volume E. Settlement F. comparative
2484. What kind of devices are used to express the method A. Glass syringe * B. Universal gas analyzer UG-1 * C. Universal gas analyzer UG-2 * D. Pump Kamovsk E. Analytical balance F.Plastic bags
2485. Specify the major activities for the radical preventing the impact of chemical factors in the production A. Replacement of harmful substances of the first class of danger and limit class 2* B. Change process * C.Automation and Integrated Mechanization * D. Continuous monitoring of the content of chemicals in the air E. Surcharge for harmful working conditions F. Nutrition
2486. What are the physical parameters of vibration and their units A. frequency, Hz * B. Amplitude, m * C. Acceleration, m / s * D.Exposure time, min. E. Direction of the axis, z F. Axis direction of the x
2487. What are the changes in the body when exposed to vibration A. Violation of neuromuscular apparatus * B. Vascular disorders * C.Change the musculoskeletal system * D.Change min. exchange E. Bazedovizm F. Reduced visual acuity
2488.soputsvuyuschie factors that increase vibration action A. Gravity of the instrument and the force pressing on it * B.Cooling microclimate * C. Static work and forced working posture * D. Infrasound E.An unfavorable light conditions F. ultraviolet radiation
2489. What are the main objectives of determining the vibration A. Routine sanitary inspection * B. Check the efficiency of recreational activities * C. Round-up built production facilities * D. Work in caissons E.Work at height F. Rotational operation
2490. Name of radical measures to prevent the impact of the body vibration of industrial workers A.Reduction at source * B. Change process * C. Decrease in the levels associated factors * D. Self-massage E.Water gymnastics F. PPE
2491. Name the 3 types of lighting fixtures A. Dustproof * B. Explosion * C.Water-resistant * D. Reflected light E.Protects against glare F. Protects the brightness of
2492. What characteristics are taken into account in the determination of Workplace lighting A. Accuracy of visual works * B. Contrast distinction of the object with the background * C. Type of coverage by source * D. Intensity of work E. Light regim F. Contributing factors
2493. specify the conditions that determine the choice of light source and lighting fittings A. Specifications visual work * B.State ambient air * C.Height of the suspension in the workplace * D. The contrast of the object with the background E. The power of the light source F.Orientation of the building
2494. select the basic functions of the body, a condition whichlight-dependent A. Visual acuity * B. Contrast sensitivity * C. Resistance clear vision * D. brightness E.Injuries F.Glare
2495. select the type of lighting in the production intended A.Work * B. Evacuation * C. Alarm * D. Artificial E.Natural F.Combined
2496. Specify the element of mechanical ventilation A. Place the fresh air intake and preparation * B. Fan * C.Ducts in the shop * D.Umbrellas E. Water sprinklers F.Airing
2497. causes of inefficient operation of ventilation A. Improperly selected air intake * B. Irrational ventilation system * C. Lack of performance * D.The lack of heating E.The availability of heating F. High air flow rate
2498. goals, when a doctor spends on occupational hygiene assessment ventilationPSN A. on the stage * B. At the planned depth of sanitary inspection * C. For Change process and reconstruction of ventilation * D.With sketch room E.When OSH women F.Discontinuous process
2499. What are the main reasons for the formation of noise A. Technical work mechanisms, engines, machine tools * B. Technological use Vibrotehnika and tools * C. Untimely repair of equipment * D. Discontinuous process E. Architectural and planning gaps F.Number of floors of the building
2500. Name any 3 Data recorded in SanPiN 0120-01 under hygienic rationing of industrial noise A.Frequency * B.Type of employment * C. Character of the noise spectrum * D.Period of the year E. Contributing factors F.work experience
2501. select displays the overall action of noise on the body A. Headache * B. increase in blood pressure * C. Increase heart rate * D.Decrease in memory E.tremor hand F.Decrease in health
2502.Specify the type of co-factors that enhance the effects of noise A. Vibration * B. intensity of work * C. work, which consists in the perception of sound signals * D.ohlazhdayuschy climate E.work at night F.working position
2503.What kind EMPR dividing frequency A. high * B. medium * C. bass * D.tonalnye E.is a pulsed F.polichastotnye
2504.Categories of persons who are prohibited from working with pesticides: A.positive women after age 50, men over 55 years old * B. pregnant and lactating women * C. persons under the age of 18 * D.not with agronomic education E.Face older than 20 years F.proshedshie briefing
2505. Specify the requirements for the release of pesticides from the warehouse: A. issuance of the written consent of the head * B. keeping strict records income and expenditure of pesticides in a special * C. issue of the presence of special transport * D.vydacha only familiar faces E.vydacha higher management F.vydacha all
2506. Types of biological pesticides: A.Microbiological * B. fungal * C. antibiotics * D.udobreniya E.minerals F.gerbitsidy
2507. Name microbiological pesticides: A. bacterial * B.virus * C.toxin * D.Mineral fertilizers E.antibiotiki F.insektitsidy
2508. List the activities related to the organizational and methodological: A. drawing up of plans and reports * B. preparation of certificates and letters * C. meetings and seminars * D.preparation materials for the imposition of fines E.control over the conduct med.osmotrov by order №300 F.the organization of the SPE
2509. List the units, neotnosyaschiesya to vibration velocity: A. Herz * B.lumens * C. Suite * D.th / s E.dB F.m / c2
2510.Specify which devices do not apply to devices for the complete characterization of industrial noise: A. Aspirator * B. Microscope* C. barometer * D.shumomer E.spectrum analyzer F.microphone
2511. What are the non-existent group of cumulation: A.Acute * B. explicitly * C. local * D.materialnoy E.functional F.physical
2512.In some cases, the doctor of Health should conduct a sanitary assessment of meteorological factors: A. complaints working * B.scheduled (depth) Health Surveys * C. investigation of cases of occupational diseases * D.Drawing up reports of occupational health department for the year E.doklad to a meeting of regional health departments F.every month
2513. For each production facility must have the following basic premises: A. Production * B. administrative * C. White * D.non-laboratory E.canteen. F.skladskie
2514. Specify the criteria, depending on which is determined by a sufficient set of sanitary A.of manufacturing processes is determined depending on the characteristics of the technological process of the enterprise * B. the number of working personnel in the greatest shift * C. the number of working women in the greatest shift * D. Domestic premises and equipment:is the number of occupational groups E.obёm products F.is the number of shops
2515.By the use of PPE is classified: A. PPE for respiratory * B. PPE for hands and feet * C. PPE for the head, eyes * D.for each profession PPE E.SIZ By the method of cleaning F.SIZ Children
2516. To reduce the impact of noise on the body which are considered necessary PPE: A.muffs * B. "Earplugs" * C. Antiphons * D.vatnye masks E.Respiratory F.mazi
2517. Diseases caused by exposure to dust: A.Pneumoconiosis * B. respiratory diseases (bronchitis, pharyngitis) * C. non-specific diseases of the skin and organs of vision (acne, conjunctivitis) * D.gemmoroy E.onkozabolevaniya F.infectious diseases
2518.What kind of camera used in experimental research for inhalation seed: A.Pravdina * B. Latushkina * C.Boyarchuk * D.Matveeva E.Fedorova F.Ivanova
2519. What kind of device is not possible to carry out measurements of industrial lighting: A. actinometer * B. psychrometer * C.Vibration * D.lyuksmetrom U-116 E.lyuksmetrom U-117 F.lyuksmetrom
2520.What types of projects are given hygienic assessment: A.Situation and master plan * B.project lighting and ventilation * C. project household premises * D.and accounting documents E.trebovaniya to the improvement of the site F.project water
2521 .With Into account the value of the distance at which the group is divided SPZ: A.1000 * B.500 * C.100 * D.250 E.400 F.350
2522. What documents are not issued in the current san.nadzore: A.303 v / f * B.305 v / f * C.301 v / f * D.309 V / f E.315 V / f F.307 V / f
2523. What kind of humidity: A. Absolute * B.max * C. Relatively * D.minimal E.high F.vyrazhennaya
2524. What instrument measures air temperature: A. Thermometer * B. thermographs * C. psychrometers * D.lyuksmetr E.radiometer F.shumomer
2525.Specify the devices that measure humidity: A. psychrometer Asman * B.August psychrometer * C. hygrographs * D.anemometer E.lyuksmetr F.vibrotestr
2526. What the components of U-116 light meter: A. Light sensor * B. extension * C. galvanometer * D.sensor E.antenny F.pump
2527.Nzovite measures to ensure the protection and health of workers A.Comprehensive measures * B. System of legislation * C. Departmental measures, economic and technical measures * D.Hygienic measures E. Individual prevention measures F.Arrangements
2528. Specify the type of national regulations A. SNIP, SanPiNs * B.Hygienic standards, state standards, Occupational Safety Standards* C. Instructions, guidelines * D. Basic orders, classification E.Collective agreements F.Contracts
2529.What types of measures in the Labour Code to ensure rational mode work and rest A.Fixed outside working hours * B. Reduction of working hours for a number of professions and jobs * C. Paid annual extended or additional leave * D. Compliance with hygiene standards E. assessment of workplaces F. The creation of a healthy lifestyle
2530 .Specify the basic right of officials, enshrined by law"On the State Sanitary Inspection" during PSN A. Prohibit the manufacture, use and sale of new products, raw materials, machinery equipment, chemicals and other non-registered in the Ministry of Health of the Republic of Uzbekistan or dangerous to life and health of citizens* B.Villa conclusions on reconstruction of objects, giving opinions on the testing of new devices* C. Carrying out monitoring in the process of construction, and by the non- suspension of the construction of sanitary legislation * D.Analysis of morbidity with VUT E.Investigate prof. Poisoning F.assessment of workplaces
2531. What are the rights of officials enshrined legislation during TSN A.Visiting for the purpose of monitoring compliance with oversight san.zakonodatelstva facilities upon presentation of business card provision of an opinion on the use of new pesticides* B. Claim by officials elimination of the san.narusheny * C. Claim by officials of the necessary documentation for the sanitary-epidemiological and radiological situation, drafting a protocol in the detection of violations * D. Giving opinions on the state of the controlled object according to the requirements of SanPiN and hygienic standards, and by the non-suspension of operation E.Giving opinions on the renovation and expansion proizvodstv.obekta F. Constitute acts in the control of construction objects
2532.Thermal state of the organism A. Teplooschuschenie* B. Body temperature and skin * C. Time response to heat* D. excitation E. drowsiness F.Insomnia
2533. What are the instrument for measuring microclimate parameters A. Anemometer * B. Psychrometer * C.Actinometer * D. potentiometer E.dynamometer F.Dinamorefleksometr
2534.What kind of preventive measures to reduce the impact on the bodyI A.Shielding * B.Plus Application air dushirovaniya * C. Protection to eyes and skin PPE * D.Separate premises E. Reduction of working time F.Prohibition of employment of women
2535. What are the medical preventive measures against adverseweather conditions A.And control over working conditions * B. Periodic med.osmotr * C. Rational drinking regimen and nutrition * D.automation E.The combination of professions F.Rational ventilation
2536. Specify the types of production which is the guiding chemical factors A. Main chemical industry * B. Industrial organic synthesis * C.The use of chemicals, chemical laboratory * D.clothing industry E. Textile production F. Pedagogical activity
2537.There are 3 main branches of toxicology A.Theoretically * B.Clinical * C.Prevention, military * D. Pharmaceutical E. General Toxicology F. Agriculture
2538 Specify the objectives of industrial toxicology A. assessment of toxicity of new chemical compounds * B. Hygienic evaluation process in the production and use of chemicals * C. Fixed hygiene regulations, the development of preventive measures prof. poisoning and prof. diseases* D. Development of pathogenetic therapy E. Making recommendations for the diagnosis of poisoning F. Development of methods for the determination in biological media
2539. some basic ways of allocating chemicals A. Kidney * B. Leather * C. Salivary glands, intestine * D. liver E. lungs F.endocrine glands
2540. What kind of electoral action Organotropona A. Neurotropic * B. Hepatotropic * C. Cardiotoxic * D. Impact on the skeletal system E. The defeat of the musculoskeletal system F. Eye disease
2541.Specify the type of manifestation of local action A. Flushing * B. Swelling * C. Necrosis, ulceration * D.Hyperthermia E. Pain F. secretion
2542,which group of substances according to the degree of danger according to GOST A. High hazardous * B.Moderately hazardous * C. Little dangerous * D. Vysokokumulyativnye E. Highly F. Moderately toxic G. Non-hazardous
2543. indicate toxicity criteria, which defineHazard Class A.MAC * B. 50 through the stomach and skin * C. LC 50 * D.The nature of the local action E. Zone specifics F.The degree of irritating effects
2544. Specify the degree of manifestation of cumulative properties A.Cumulation pronounced * B. Expressed cumulation * C. Moderate accumulation * D. Cumulation at toxic doses E. Cumulation strong F. Cumulation resistant
2545. production where possible the impact of metals on the job A. Mining and refining * B. Metal smelting * C. Getting inorganic and organic compounds of metals * D. transportation E. construction works F. storage
2546. Specify the most toxic mercury compounds A. Ply mercury (vapor) * B. Rtutnoorganicheskie connection * C. Mercuric chloride * D. calomel E. Mercury sulfide F. Silicate mercury G. Metallic mercury (liquid)
2547 Specify the path demerkurializatsii premises mercury spill A.Collect spilled mercury * B. Remnants of mercury fill a strong solution of potassium permanganate or 20% FeCl3 * C.Box building workshop equipment clean superheated steam * D. The remains of mercury fill bleach E.To eliminate leaks and cracks in the walls F. A month to check the effectiveness of the measures taken
2548. Specify the requirements for equipment and facilities when working with mercury A. Equipment should be based on a space * B. Whole flooring * C. Work with mercury in a separate room * D.Work only on the top floor E. The absence of ceilings F. The surface is covered with a metal workplace
2549.production where organic solvents yavlyayutsyasya harmful factor A. Getting organic solvents * B. Paint industry * C.Industrial organic synthesis * D. Production of chemicals E.medicine F.Mining Industry
2550. What are signs of poisoning by chlorine and its compounds A.Dyspnea, cough, chest pain* B.Eye irritation. dyh.putey, toksicheskiybronhit, laryngitis* C. Skin irritation, dermatitis, acne, eczema* D.Loss of appetite E. euphoria F.Pain in the lower extremities
2551. Symptoms of poisoning oxygen compounds of sulfur A.Irritation of eyes * B. Respiratory tract irritation * C. Influence on the blood * D.Skin ulceration E.Oligouriya F. hypotension
2552. Specify the frequency of the term san air control A. To substances with acute directional mechanism of action of the continuous automated monitoring * B. 1 to substances hazard class 1 time in 10 days * C.2 to substances hazard class 1 per month * D.1 gas erupts once a week E. Very persistent connections around the clock F. Carcinogens 1 times per shift
2553. Specify the method used to analyze air sampleschemical substances A. Optical * B. Electrochemical * C. Chromatographic * D. volume E. Settlement F.comparative
2554. What kind of devices are used to express the method A. Glass syringe * B. Universal gas analyzer UG-1 * C. Universal gas analyzer UG-2 * D. Pump Kamovsk E. Analytical balance F. Plastic bags
2555. Specify the major activities for the radicalpreventing the impact of chemical factors in the production A.Replacement of harmful substances of the first class of danger and limit class 2 * B. Change process * C. Automation and Integrated Mechanization * D. Continuous monitoring of the content of chemicals in the air E. Surcharge for harmful working conditions F.Nutrition
2556. What are the physical parameters of vibration and their units A. frequency, Hz * B. Amplitude, m * C.Acceleration, m / s * D.Exposure time, min. E. Direction of the axis, z F. Axis direction of the x
2557. What are the changes in the body when exposed to vibration A.Violation of neuromuscular apparatus * B.Vascular disorders * C. Change the musculoskeletal system * D. Change min. exchange E.Bazedovizm F. Reduced visual acuity
2558. Point soputsvuyuschie factors that increase vibration action A.Gravity of the instrument and the force pressing on it * B. Cooling microclimate * C. Static work and forced working posture * D.Infrasound E. An unfavorable light conditions F.ultraviolet radiation
2559. What are the main objectives of determining the vibration A.Routine sanitary inspection * B.Check the efficiency of recreational activities * C.Round-up built production facilities * D. Work in caissons E. Work at height F.Rotational operation
2600.Name 3 of radical measures to prevent the impact ofthe body vibration of industrial workers A. Reduction at source * B. Change process * C. Decrease in the levels associated factors * D. Self-massage E. Water gymnastics F. PPE
2601.Name the 3 types of lighting fixtures A. Dustproof * B.Explosion * C.Water-resistant * D.Reflected light E.Protects against glare F.Protects the brightness of
2602.What characteristics are taken into account in the determination of Workplace lighting A. Accuracy of visual works * B. Contrast distinction of the object with the background * C.Type of coverage by source * D. Intensity of work E. Light regime F. Contributing factors
2603.specify the conditions that determine the choice of light source and lighting fittings A. Specifications visual work * B.State ambient air * C.Height of the suspension in the workplace * D.The contrast of the object with the background E.The power of the light source F. Orientation of the building
2604. select the basic functions of the body, a condition whichlight-dependent A. Visual acuity * B.Contrast sensitivity * C. Resistance clear vision * D.brightness E. Injuries F. Glare
2605. select the type of lighting in the production intended A. Work * B. Evacuation * C.Alarm * D. Artificial E. Natural F. Combined
2606. Specify the element of mechanical ventilation A. Place the fresh air intake and preparation * B.Fan * C. Ducts in the shop * D.Umbrellas E. Water sprinklers F.Airing
2607. Point causes of inefficient operation of ventilation A.Improperly selected air intake * B, Irrational ventilation system * C.Lack of performance * D. The lack of heating E. The availability of heating F.High air flow rate
2608. What are the main reasons for the formation of noise A. Technical work mechanisms, engines, machine tools * B.Technological use Vibrotehnika and tools * C. Untimely repair of equipment * D.Discontinuous process E.Architectural and planning gaps F.Number of floors of the building
2609. Name any 3 Data recorded in SanPiN 0120-01 under hygienic rationing of industrial noise A. Frequency * B. Type of employment * C. Character of the noise spectrum * D.Period of the year E. Contributing factors F.work experience
2620. Select displays the overall action of noise on the body A. Headache * B. increase in blood pressure * C.Increase heart rate * D.Decrease in memory E.tremor hand F.Decrease in health
2621. Specify the type of co-factors that enhance the effects of noise A. Vibration * B. intensity of work * C. work, which consists in the perception of sound signals * D.ohlazhdayuschy climate E.work at night F.working position
2622.What kind EMPR dividing frequency A. high * B. medium * C. bass * D.tonalnye E.is a pulsed F.polichastotnye
2623. List the three types of pneumoconiosis A.Silicosis * B.Anthracosis * C.Siderosis * D.varikoz E.gepatoz F.keratoz
2624.List the facilities used to clean the air before being discharged into the atmosphere A.Cyclones * B. Dust chamber * C.Electrostatic precipitators, fabric filters * D.pumps E.Generator F.antifony
2625. Name displays general actions of noise on the body A. Headache* B.Increased blood pressure * C. Increase heart rate * D.tremor E.potovydelenie F.sonlivost
2626. Name changes occurring in the hearing under the influence of the noise A. Adaptation * B. Fatigue * C. Deafness, Deafness * D.Voltage E.nausea F.dispepsiya
2627. Specify the contributing factors reinforcing effect of noise on the body A.Vibration * B. Supply of Labor * C.Operation consisting in the perception of sound signals * D.humidity E.temperature F.is the chemical factor
2628. Name of the preemptive effects of infrasound on the body A. The vestibular apparatus * B.CNS, CVS * C. Respiratory System * D.Vydelitelnaya System E.It is the support-motor apparatus F.Reproductive system
2629.What are the causes of the disease ultrasound A. Asthenovegetative Syndrome* B.Paresthesia* C.Paresis * D.gastritis E.glaucoma F.pharyngitis
2630. of any organism in which when subjected to vibration developed lesions A. The vestibular apparatus * B. Musculoskeletal system * C.Vascular system * D.Polovaya System E.Respiratory system F.Vydelitelnaya System
2631.What types of EMF given wavelength A.Length * B.Medium, Short * C.Ultrashort * D.Slim E.ultratonkie F.gigroskopicheskie 2632.List at what levels and how many times the measurements of EMF A. On the level of 0.5 m above the floor * B.1 m at breast height, 1.7 m at the head * C.3 measurements in each point * D.2 M at chest level E. 1.5 m from the floor F. 3 meters at chest level
2633. what factors that determine the biological effect of the laser A.Radiation power * B. Caloric exposure * C.Time of exposure * D.Conducting medical examinations E.Chemical factors F.Peredavaemoy Information
2634. List the benefits of natural lighting A.General biological effect * B. More efficiency * C. Most adequate spectral composition * D.Requires Costly E. High brightness F.Gepatotropnoe Action
2635.From what conditions depends on the uneven illumination with natural light A.Periods of the year * B. Time of day * C.Climatic features * D.values Premises E. Availability of ventilation F.Availability Domestic premises
2636. What are the main documents on which to assess the effectiveness of the device and the ventilation systems A. SanPiN 0203-06 * B. GOST 12.1.005-88 * C. SNIP 2.04.05-97 * D.SanPiN 0122-01 E. SNIP 2.01.05-98
2637.SanPiN List # 0028-94 construction of local exhaust ventilation A.Hood, umbrella * B. Extractor hood * C. Onboard suction * D..vozdushnye veil E.vozdushnye soul F.Generator
2638. List the most common methods used to analyze air samples for the maintenance chemicals A. Optical * B.Electrochemical * C.Radiometric * D.kalorimetrichesky E.photochemical F.goniometric
2639.Name the instruments used for the rapid method A.Syringe of glass * B. Universal gas analyzer UG-1 * C. Analyzer AM 5 * D.lyuksmetr E.gazoanalizator F.vibratestr
2640.List the main branch of science of toxicology A. Theoretical * B.Clinical * C. Prevention * D.gigienicheskaya E.fiziologicheskaya F. Biological
2641.List the basic methods of Toxicology A. Pilot * B. Hygienic * C. Clinical, physiological* D.genetic E.biological F.hronometrazhny
2642.Specify the types of displays of local action A. Flushing * B.Swelling * C. Ulceration * D.nausea E.potovydelenie F.keratosis
2643.Name proyaleniya destruction lead the nervous system A.Paresthesia* B.Neuritis * C.Paresis * D.meningity E.dermatity F.mielity
2644.List the major symptoms of mercury poisoning A. The defeat of the central nervous system * B. Influence on the digestive tract * C. Change the functional state of the thyroid gland * D. Rapid breathing E.Dermatitis F.adenoma
2645.groupy organic solvents A.Hydrocarbons * B.Terpenes * C.Alcohols * D. amino acids E.formaldegidy F.petrol
2646. What organs and systems are affected by aniline A. Blood * B. Liver * C. Kidney * D.It is the support-motor apparatus E.polovaya system F.leather
2647.List the types of compounds related to irritating gases A.And chlorine * B. Sulphur dioxide * C. Nitrogen Compound* D.formaldehyde E.ketone F.azon
2648.displays the adverse effects of the biological factors A.Sensitization * B. Infection * C.Toxic * D.physical E. Chemical F.fotohimicheskoe
2649. List the symptoms of allergic influence A. Hay Fever * B.Allergic rhinitis, dermatitis C.Wheeze bronchitis * D.pharyngitis E.tonsillitis F.pankreatit
2650. Name manifestations of infectious exposure A. Penitsilliozy * B. Kandidomikoz * C.Actinomycosis * D.berillioz E.antrakoz F.varikoz
2651. Specify the most common in the production zooantroponozy A.Brucellosis * B.Tularemia * C.Toxoplasmosis * D.sibirskaya ulcer E.leptospirosis F.plague
2652. Name radical preventive measures to reduce the influence of biological factors A. Improved process * B. Insulation of rooms and cabins * C.Sealing Equipment * D.Briefing E.Conduct periodic physical examinations and preliminary F. Efficient lighting
2653. Name of medical and preventive measures of influence of biological factors A. Systematic monitoring of working conditions * B. Carrying out preliminary and periodic medical examinations * C. Prevention dysbacterioses * D.Sealing E.automation F. Room Isolation
2654.Specify the types of jobs within the main stage A. Spraying * B.Dusting * C.Check the efficiency * D.otmerivanie E.Obezvrezhivanie Packaging F.Sdacha Pesticide residues in warehouse
2655.List the jobs preparatory stage A.Opening of packaging * B.Weighing * C. Measuring * D.Opylivanie E.Prigotovlenie Worksheets * F.Sdacha Pesticide residues in warehouse
2666. Specify the main groups of pesticides by chemical composition A.Organophosphates * B.Karbominovoy acid derivatives * C. Urea derivatives * D.Opasnye E.resistant F.Malostoykie
2667. Specify the requirements to be met by storage facilities for the storage of pesticides A. Exclusive built premises * B.Have 2 types of rooms * C. Cement floor and walls * D.Have 4 types of premises E.Mnozhestvennye Building entrances F.Ventilation Total
2668. List the main legislative documents governing the work with pesticides A.SanPiN 0028-94 * B. Law of Uzbekistan "On protection selhozrasteny from pests, diseases, weeds" * C. SanPiN 0059-96 * D.SanPiN 0203-06 E.SanPiN 0120-01 F.SNiP 2.01.05-98
2669. Name shirokoprimenyaemye FOP A. Zalon * B.phosphamide * C.malathion and sayfos * D.granuly E.dusty F.PAV
2670. What are the main symptoms of poisoning FOP A. Saliva and watery eyes * B.Bronchospasm * C. Bradycardia * D.Dermatitis E.Hepatitis F.Meningitis
2671. Name seed dressing A. Bronotak * B. Nusa * C.SAW * D.Karbofos E..Dihlofos F.Sayfos
2672. List of the mask A.Filter box * B. FACIAL * C. Corrugated tube bag * D.Tara E.Gazoanalizator F.Respirator
2673.What kind of eyewear A.From the solid particles and dust * B. Liquid splashes from the molten metal and * C.From EMPR and laser * D.In-ear E.Antiphon F.Schitki
2674. What are the social and economic factors affecting health A. Housing and living conditions * B.Power * C.Financial Security * D.Climate E.Disability F.Physical development 2675. Specify the analysis period the incidence of HLA physician CGSEN A.Quarter * B.Six months, 9 months C. Year * D.2 years E.Month F.4 years
2676. Name the information included in the F-16VN A.Passport details, reporting period * B.Number of working year-round, including women * C.Nosological form * D.Shop E.Experience F.Floor
2677. Specify the visibility used in the analysis of disease A. Tables * B. Line charts * C. Stolbnikovye chart * D.Organayzer E.clusters F.Videofilmy
2678. What are the main institutions that passed the act of investigation PZ A. Administration of the enterprise * B. District CSES * C.The trade union committee of the enterprise * D.Prokuratura E.republic CGSEN F.Ministry of Communications
2679. List of women varies with physical exertion A.GI * B. Musculoskeletal system * C. The menstrual cycle * D.Leather E.Vydelitelnaya System F.Eyes
2680. List the major occupational groups in the cotton industry A. Machine operators * B. Agriculturist * C.Agronomists, entomologists * D.Mediki E.Sadovody F.Formovschiki
2681. List PP emerging from working at ginneries from dust A. Pneumoconiose * B. Dust bronchitis * C.Asthma * D.Neuritis E.Miozit F.Pharyngitis
2682. List the industry engineering industry A. Transport * B.Tractor * C. Machine-tool * D.Mechanical E.Nagrevatelnye F.Pressovye
2683. List the hazards in the forge A. Products from incomplete combustion of fuel * B.Plus Noise and vibration * C. Excess heat * D.Biologichesky Factor E.chemical Factor F.Vynuzhdennaya Working posture
2684. What are the technical and sanitary prevention in hot shops A. Mechanization, automation * B.Aeration * C.Insulation * D.PRELIMINARY and periodic medical check-up E.SIZ F.Spetspitanie
2685. What are the ways of coloring products A. Manual * B.Immersion * C.B electrostatic field * D.Chemical E.Physical F.Mechanized
2686.Specify the types of occupational diseases have been reported in the cold working shops in mechanical production A.Neuritis of the auditory nerve * B.Dermatitis * C.Pulmonary fibrosis * D.Gepatity E.Tsistity F.Miozity
2687.List the medical and preventive measures in hot shops A. Provide PPE * B. Vitaminization * C. Preliminary and periodic medical examinations * D.Mechanization E.Automation F.Ventilation
2688.Name the occupational disease of workers of hot shops A,Hyperthermia * B.Cataract * C. Vibration disease * D.Hepatitis E.Miozit F.Dermatitis
2689. List the main negative factors in machine shops A. Mineral-metal dust * B. Supply visual organ * C. Coolants * D.Biologichesky Factor E.chemical Factor F.High pressure
2690.What are the main information set out in the certificate requests CGSEN A.From whom and on what issue request is received * B.Brief information about the author of the request * C. Presentation of the information requested or the results * D.Prikazy E.Postanovleniya F.Protocol
2691. Name registration forms that are filled at an in-depth sanobsledovaniya A.F-315 / y * B.F-330 / y * C.F-334 / y -335 / y * DF-304 / y E.F-303 / y F.F-302 / y
2692. List the main functions of sick leave: A. Legal (excuse for absenteeism) *; B. Medical (cause illness) *; C.Financial (payment of disability days) *; D. Unrecorded. E. The trade union; F.Protocol
2693. What are the main types of information to be included in the F-16 VN: A. Passport details, reporting period, the number of year-round workers, including women *; B.Nosological form *; C. Number of cases of temporary disability days *; D.is a statistical management; E.pereshedshie to another job; F. Retired.
2694 Name the institution that medical facilities on a quarterly basis, not later than the 15th day after the reporting period expelled form 16-HV: A. Sectoral trade union committee;* B.CGSEN * C. Statistical Management *; D.Ministry of Health of the Republic of Uzbekistan; E. Ministry or agency to which the object. F.tax
2695. List the basic data necessary for an in-depth analysis of the disease: A. Name, age working * B. Workshop, position (occupation), length * C. Name of the disease * D.Who is the divisional therapist; E. When and where was the last time inpatient treatment; F. Marital status
2696. What are the items most frequently carried out in-depth analysis of morbidity with HLA: A. On workshops;* B.On professions;* C. According to seniority;* D. Who is the divisional therapist; E. by nationality; F. Marital status.
2697. Specify the types of diagrams used in the analysis of morbidity: A.Line diagrams;* B.Bar graphs;* C. Pie charts *; D.Curves. E. Table; F.A-list
2698. Specify the information needed to calculate the economic impact due to the reduction of disease: A. Number of days saved, compared to the same period *; B. Middle generation 1 working day *; C. Middle sick pay 1 working day *; D. The average age of employees; E. Marital status. F. Sex workers.
2699 Specify the information needed to calculate the economic damage due to the increasing incidence: A. Labor losses in days *; B. Cost nedodali products sumac 1 working day *; C. Funds spent for payment of sick leave in the sumac or detention in a hospital * D. The total number of employees; E. The average length of employment; F. Sex workers.
2700. List the hygiene requirements to be met by PPE: A. Protect against this harmful factor *; B. A minimum negative impact on the system of the body and the labor process *; C. Conforms to the technical aesthetics and ergonomics * D. Application on request; E. Should be easy to implement; F. Sex workers.
2701. List the purpose of PPE according to the classification: A.PPE Respiratory * B.PPE hands and feet;* C.PPE head, eye and face * D.PPE depending on the profession; E.PPE according to the methods of disposal; F.SIZ In hand
2702. List of the mask: A.Filtration box *; B.Facepiece *; C. Corrugated tube;* D.Large backpack; E. helmet. F.mask
2703. Name of PPE from the noise: A.Muffs * B.Ear (ear plugs) *; C.Antiphons *; D.Gauze bandages; E.Respirators. F. helmet.
2704.List the types of action on occupational health physician with the audit of the use of PPE: A. Identify jobs where you need to use PPE *; B. The correct storage, and disposal of PPE *; C.Briefing employees on the use of personal protective equipment *; D.SIZ Depending on methods of disposal; E.Provision of municipal facilities; F.The study of the health of workers.
2705.List the hygiene requirements to be met by PPE: A. Protect against this harmful factor *; B.A minimum negative impact on the system of the body and the labor process *; C.Conforms to the technical aesthetics and ergonomics * D. The study of the health of workers. E.Application on request; F. Should be easy to implement;
2706. Specify requirements for warehouses for the storage of pesticides: A. Is specifically built room has 2 types of rooms (for storage and staff) *; B. Cement floor and walls *; C. The presence of mechanical ventilation * D.The location is as close to human settlements; E.Issue and registration is not required; F.The study of the health of workers.
2707. Specify the requirements for the release of pesticides from the warehouse: A. Issuance of the written consent of the head *; B.Keeping strict records income and expenditure of pesticides in a special journal *; C. Issue of the presence of special vehicles and special containers * D.Issuing only familiar faces; E.The study of the health of workers. F. Pesticide containers is not required;
2708. List the medical and hygiene prevention measures: A.PPE *; B. Preliminary and periodical medical check-working *; C.Disposal containers and equipment, delivery of pesticide residues in the warehouse *; D. Free schedule. E. The use of pesticides age and sex work is not important; F.reablitatsiya
2709. List the type of the main premises of the production facility: A. Production;* B.Administrative * C. White * D. Individual; E. Collective; F.are common
2710.List the type of the main premises of the production facility: A.Production;* B.White * C.Administrative * D. Collective; E.are common F.Individual
2711. List the premises belonging to the common sanitary: A. Wardrobe;* B. Shower;* C. Washrooms and toilets * D. pharmacy; E.Bath; F.kitchen
2712. Group production processes, defined according to the characteristics of the technological process of the enterprise . A.The number of working personnel in the greatest change *; B. Time break; C.The number of working women in the greatest shift * D. Number of floors of the building; E. Free schedule. F.The use of pesticides age and sex work is not important;
2713. What do I need the doctor on hygiene of labor in monitoring the implementation of the requirements specified in the act san depth. Survey? A.The act san depth. Survey *; B. Ordered on the project intended the persons responsible for compliance with the requirements *; C.Action plan to implement the requirements of the project * D.Zhurnal Dislocation; E. occupational health department plan CGSEN; F.documentation
2714. Specify the types of work on occupational health physician in detecting cases of non-compliance requirements CGSEN: A. Drawing the act san. Survey to understand the cause of failure *; B. Preparation protocol F-309 / y *; C.The chief doctor of documents CGSEN * D.Conducting san.-clearance. work; E. Participation in the MIP; F.documentation
2715. Basic requirements for the orders. examination of projects of ventilation: A. Matches the designed parameters of ambient air hygiene requirements and standards *; B. Feasibility of the designed ventilation systems *; C. Feasibility of design solutions mechanical ventilation * D. The air supply from top to bottom; E.A combination of air heating; F.Ventilation
2716.The basic elements of mechanical ventilation: A.Place the fresh air intake and preparation *; B. Fan * C. Ducts in the shop;* D.is the height of the building; E.Water sprinklers. F.Heating
2717. Reasons for inefficient operation of ventilation: A.improperly selected air intake *; B. Irrational system of ventilation and air flow unprepared *; C. Lack of performance * D.no heating; E. The availability of heating; F. Heating
2718.Regulations for evaluating the effectiveness of the device and the ventilation systems: A.GOST 12.1.005-88 "General hygiene requirements to the working zone" *; B. SNIP 2.04.05-97 "Heating, ventilation and air conditioning" *; C.SanPiN № 0058-96 «microclimate of industrial premises" *; D.Prikaz Number 300; E.Hygiene classification. F.prikaz №200
2719.What is the criteria to ergometric severity of labor: A. Working posture *; B.The value of cargo;* C.The power of work;* D.Respiratory minute volume; E.The number of completed products. F.The volume of breath;
2720.Types of dynamic work on the degree of participation of different groups of muscles: A. Total (more than 2/3 of the working muscles) *; B. Regional (1/3 to 2/3 of the muscles) *; C. Local (less than 1/3 of the muscles) * D. Average (part of trunk muscles); E.Severe (involvement of muscles of the shoulder girdle); F. Minute 2721.What changes occur in the body when exposed to heating microclimate: A. Increase in skin temperature and body *; B.Sweating *; C.Tachycardia * D.bradikardiya; E.Lowering the temperature of the skin; F.dermatity
2722. List the cases in which a doctor spends on occupational hygiene assessment of meteorological factors: A. Complaints employees *; B.Scheduled (depth) Health Surveys;* C. investigation of cases of occupational diseases * D.Report on the meeting of the district health departments; E. Reporting of occupational health department for the year; F.Drawing up of occupational health department reports a year;
2723. Name 3 aspect in the study of females working in the production of: A. Social* B. Economical* C.Medical* D.Zdravoohranenie E.egkay Buisness F.Selkoe Household tasks
2724. otrasleynaibolshego extensive use of female labor A. Health* B. Easy Buisness* C. Sel'kov economy* D.Prosvschenie And cultures E.Mashinostroenie F.Tekistilnoe Production
2725.What is the same deystvugoschih women and men A.Plus Noise* B.Ultrasound * C. Zatlennost* D.Emm E.Vibration F.Some Of pesticides
2726.precheslite leading production with the effect of noise ispolzovanii female labor: A. Tekistilnoe production* B.MACHINERY* C.Production of building materials* D.Selskogo Economy E.Fizkultura And sotsialny software F.Protsvishenie And Culture
2727. What types of reactions of the body of a pregnant woman on the effects of noise A.Reduced motion of the fetus* B. Snizhaettsya reaction fetal acoustic signals* C. Increase sertsebie fetus* D.Opuschenie Uterus E.Izminenie Musculoskeletal F.Izminenie Menstrual cycle
2728. .Precheslite of women varies with physical exertion + Zhelduchnogo - kishechny tract A.Cardiovascular System * B.sosuditsty* C.Locomotor system* D.Cervical cancer E.Neproizvolnie Abortion F.Amenorrhea
2729. What are the changes in women with a forced working posture: A. Naprezhenie musculoskeletal system* B.Sulenie vessels of small pelvis* C.Curvature of the spine * D.Tachycardia E.Reduce Attention F.Asfiktsiya Fetus
27310. type prechislite prevention effects vnuzhdennogo working position: A.Rationalization workplace* B.Industrial gymnastics* C. Cheredovnie rabotysidya and standing* D.The prohibition of employment of women in heavyJob E. Establishing the marginal rate prenoski F.Restriction of employment of women at night
2731. Name 3 kinds of changes in women under the influence of microclimate heating: A. Thermoregulatory capacity of the body* B.Supply from the heart of –sosudistoy* C. Supply of the nervous system* D. Reduction of attention E. Violations of the hormonal status F. Incoordination
2732.List symptoms under the influence of microclimate heating: A.Tachycardia * B. Incoordination* C. Aseriksiya fetus* D.Varikoznoe Veins E.Decrease in muscle tone F.Embritropnoe Action
2733. Describe the kinds of effects on the body vibration: A. Violations menustralnogo cycle* B.Varicose veins * C. Reduced muscle tone* D.Teratogenogo Action E.action On generative function F.Embritropnogo Action
2734.Name the 3 types of mutations both the female body under the influence of electromagnetic radiation A. Teratogenicity* B. Acts on the generative function* C. Embritropnogo action* D.Violation Menustralnogo cycle E.Varikoznoe Veins F.Decrease in muscle tone
2735. list the types of diseases caused by chemicals A. Merkuralizm* B. Saturnism* C.Dermatitis * D.Bronchitis E.Pneumonia F.Laryngitis
2736. What are the leading sectors of agriculture Uzbekistan A.Of Cotton * B. Crop* C.Livestock* D.Mashinastroenie E.Shipbuilding F.Building
2737. species list major professional groups hlopkovolstve: A.Machine operators* B. Agriculturist* C.Agronomists * D.operators E.Dispetchery F.Doctor
2738. may have a negative effect on the body mehanizatrov A.Plus Noise* B.Vibration* C. Physical stress* D.Ventilation E.Osveschennost F.Mineralnnoe Fertilizer
2739. Specify harmful FACT at Providence cultivation of cotton: A. Hot climate* B.Peel * C.Plus Noise* D.physical Voltage E.Traffic fumes F.Opasnost Injury
]2740. What kind of products are produced hlopkoochistitelye plants: A. Cotton fiber* B.Cotton linters* C. Cotton seeds* D.Individual protection means E.Rezinovoe Boots F.botinki
2741. .ukazhite main shops ginneries A. cleansing* B. voloknootdeletelnyh* C. puhootdeletelnyh, pressing* D.mechanical E.thermal F.galvanic
2742. .ukazhite auxiliary shop at ginneries: A. waste treatment* B.boring machine saws* C. mechanical repair* D.miteynye E.kuznechnye F.thermal detachment
2743. main adverse factors in machine shops: A. mineral - metal dust* B.Supply visual organ* C. Coolant (metalworking - fluids)* D. Nitrogen oxides E.polimernye substance F.Sulphur dioxide
2744. ozdaroviteliyh events in machine shops: A. Rationalization process equipment (machines H PU)* B.Local exhaust and general ventilation is* C. guards, installation of shielding* D.maski E.kaski F.protivogazy
2745. Name the 3 types of welding: A. fusion welding - gas and electric* B.pressure welding* C. plasma* D.Mineral - metal dust E.The voltage of the body F.SOZH --smazochno - Coolants
2746.Specify the adverse factors at zlektro arc welding: A.UV* B.high brightness* C. fumes (nitrogen oxides, ozone)* D.Mineral - metal dust E.The voltage of the body F.SOZH --smazochno - Coolants
2747. recreational activities in the electric welding works: A. mechanization and automation* B. replacement of electric arc welding on the contact* C.insulation electric welding portions 4 eye protection shields* D.maski E.kaski F.protivogazy
2748.For what purposes are processing products in electroplating shops: A. coating metal products* B. giving strength* C. protection against corrosion* D.mehanizatsiya and automation E.replacement of the rechargeable electric arc welding on the contact F.Insulated electric welding portions 4 eye protection
2749.health measures in electroplating shops: A. mechanization of labor-intensive work* B.local exhaust ventilation (on-board pumps are)* C. separate room* D.mehanizatsiya and automation E.replacement of the rechargeable electric arc welding on the contact F.Insulated electric welding portions 4 eye protection
2751.Specify the occupational hazards in the microbiology of Industry A. Biology * B. physical (microclimate heating, industrial noise)* C. Chemical* D.embriotrop E.teratogen F.mutagen
2752. Give hygienic characteristics of the biological factor in the micro-biological production: A.Lead and distributed at all stages of production* B. need to comply with sterility* C.intake air mainly in the form of an aerosol* D.embriotrop E.teratogen F.mutagen
2753. What types of non-ionizing electromagnetic oscillations that occur as a harmful factor A.ultrafioletovye* B. Infrared* C.Radio frequency electromagnetic fields* D.a magnetic field E.electric field F.physiotherapy
2754.What types of EMF given wavelength A. Length* B.middle* C. or transaction* D.ultravysokie E.sverhvysokie F.Extremely high
2755.List 4 types polzavateley RF EMF based on the thermal effect A.induction heating of metals (hardening, melting)* B. Welding* C. soldering metal* D.nakladka E.burning F.vibration
2756. type .Nazovite industry where there EMF as the occupational hazards A.electronics* B.металлургия(машинастроение)-закалка,плавка,сварка,сушка* C.радиосвязь.радиолакация.радионавигация,радиострономия* D.antenna E.radiovolny F.radiotermichesky
2757. categories irradiated contingents A. obluchunie in production at EMI and maintenance of application equipment* B. Productions exposure to surrounding personnel, non-maintenance of the equipment* C.exposure of the population* D.irradiation falls ill E.irradiation of health workers F.irradiation in the prophylaxis
2758.zones, which are formed around the source of radiation of EMF A.near zone or zone induction, its radius is equal to the wavelength palovine* B. intermediate band-band interference* C. further wave zone* D.izbytochnaya area E.zone source F.time exposure
2759. What are the factors on which depends mainly on the harmful effects of EMFs on the body A. On the power and speed* B.on the nature of radiation* C.on the mode of radiation* D.sochetonnye action E.from AREA F.from frequency
2761. pokozatelya, ispolziumyh for hygienic assessment of EMF in the workplace A. source area, where the working and the power of EMF* B.time exposure* C. character and mode voyzdeystviya* D.time efficiency E.a character of the impact
2762.List of cocoa 3 levels and spend time Skolkov izmireniya EMF A. at 0.5 m from the floor* B.1m-at chest* C. 1.7 m head-on levels* D.on the level of 0.6 m above the floor E.1.5 m at chest F.1,6m At head
2763.What kinds of basic preventive measures privoyzdeystvii EMPR A. Decrease in power obrazavaniya* B.shielding* C.ispolzivaniya PPE * D.body check E.mode labor F.profilakticheskoe supply
2764. Name 3 main types of personal protective equipment when working with EMPR A. metallic glasses setchatnye* B.shielding source* C.ispolzivaniya PPE * D.mode of work and rest E.Meals F.Clothes of metallised fabric
2765. on the body of a man Cator has thermal effects A. lens* B. gall bladder* C. ventricles* D.gipatalamus E.liver F.slizistye shell
2766.Name the 3 types of energy sources, ispolzuemyh for laser radiation A. Electric* B.Light* C.Thermal* D.vidimoe E.is a direct F.rasseyannoe
2767.List the three basic elements of the laser A. working substance* B. optical rezanator* C. power energy* D.radioelektronika E.rasseyannoe F.zerkalnoe
2768. factors that affect the action of the laser biologieskoe A. the power of radiation* B.radiant exposure* C. prodolzhitelnost exposure* D.Local deysviya E.General deysviya F.specific 2769. types of laser radiation with biological structures A.Thermal* B. thermoacoustic* C. photochemical* D.specific E.nospetsifichesky F.General deysviya
2770. Specify the type of objects related to biological harmful proizvod¬stvennomu factors: A.pathogenic microorganisms and their metabolic products* B.macro-organisms and their metabolic products* C.cell and tissue culture* D.specific E.nospetsifichesky F.General deysviya
2771.What are the impacts on biological factor is organizing workers: A. Sensitization* B. infectious* C.toxic* D.vospalitelnoe E.paratoksicheskoe F.metatoksicheskoe
2772. In the microbiological industry has a range of hazards, some of them leading and why: A.Biology * B. considering levels* C,postayanstva exposure* D.chemical E.noise, F.c uuchetom raznoobraziyaveschestv
2773. What preventive diseases can be allergenic action of biological factors: A.hay lihoratka* B. dermatitis* C. asthma* D.keratit E.cataract F.ekzema, izyavleniya
2774.Prof.etiologii What diseases can develop from infectious action of biological factors: A. zooantroponozy* B.TB * C.candidiasis* D.ostrye and hranicheskim E.Easy, moderate tizhelye F.from air kapelnnoy infection
2775. What are the companies most frequently vstrechayutsyazooantropanozy: A. Meat Processing Plant* B.kivotnovodstvo* C. microbiological industry* D.konditerskaya industry E.tekstilnaya industry F.mehovoe production
2776.What should primarily take varch CGSEN on Occupational Health in investigating complaints from the public on the dustiness of hlopkazavoda: A.Determine the presence of* B. The value of the SPZ* C.Ochisntyh facilities* D.the Presence of other hazards in the SPZ E.Obsledovat Ventilation F.Availability Water sources
2777.Which of the following factors sposobstvuyutvozniknoveniyu monotony: A.No external stimuli* B. Hypokinesia* C. Monotony signals* D.High Dust E.Zagazovannost Air F.Industrial
2778. What are the criteria to determine the degree of monotony of work: A. number of elements monogo* B. monogokratnost pavtoryayuschihsya operattsy* C. dx prodelzhitelnost seconds* D.time spent to perform operattsii working character E.to rest F.vtorostepennyh operations
2779. Which of the participating events should be attributed to effective measures to combat the monotony of: A. enlargement of working operations* B.their periodic change* C.mikroperervyvy* D.Improved conditions Labour Organization E.providing PPE F.Carrying out of medical examinations
2780.What reglamentiruetsiya the rational mode of work and rest: A. The duration of work* B. Breaks* C.The number and content of the* D.Working conditions E.Time To receive write F.Duration Working time
2781.What distinguishes the work and rest: A.DSA* B. Weekly* C.Annual* D.Ezhednevy E.Soat F.Vahtovy
2782.What is perechislinnogo relates to the activities of fizologicheskoy rationalization of the labor process: A.Entry into the job gradually* B.Rhythm * C. Posledovatelnostt* D.Automate Otdelnnyh operations E.Work-condition F.technological Process
2783.Problems of fatigue vkulyuchayut include: A.Clarification of the reasons which caused fatigue* B.His diagnosis* C.Development of prevention* D.Studying of the pathogenesis of fatigue E.Develop Measures to correct utolmleniya F.Generator of life
2784. Specify the correct sequence of phase changes in the central nervous system during operation: A. Ayrabatyvaemost* B. Workshop excitement* C. Protective inhibition* D.Uvilichenie Blood supply E.Snezhnie Blood supply F.Vertebralie
2785.What are the historical data needed to calculate the impact of volume of blood: A. Systolic* B. Diastolic pressure* C. Age test* D.Chostata Pulse E.values MEK F.CHSS 2786. What pakazateli often studied to characterize funktsianalnogo condition of the central nervous system during operation: A.Hidden, rumors* B. Zritelnomotornoy reaction* C. Proof-test results* D.Tremor Brush E.Emotsianalnoe Naprezhenie F.Zritelnogo Analyzer
2787.How much and what kind of group is divided into physical work: A. 3-total* B.Regional* C.Lakalnaya* D.Manual E.mehanizirovaniaya F.Staticheskaya
2788. Which of these indicators are energometricheskim to assess the intensity of labor: A. Video viewer* B. Work* C. Drudgery* D.Nereglamentirovanny Mode of work E.Tekuchest Frames F.Nochnioe Time
2789.If any devices pamoschi investigated utomilenie muscular system and when: A. Dinamometir* B. Termometir* C. In the dynamics of the day rabochkgo* D.ergometir E.refleksometir F.tahometir
2790.Which of these indicators are fizologicheskim to assess the severity of labor: A. energy* B.Chostata heart vessels* C.Mishechnaya endurance* D,Operating Posture E.Obem Muscle groups F.MOK, CRM
2791.Specify the device value ratsionalnogo lighting in production areas: A.Hygienic * B.technology * C.economical* D. Natural E.iskusstvennoe F.sovmeschennoe
2792.thygienic value as industrial lighting: A.creating optimal working conditions* B.decrease in injuries* C. Software* D.neravnomernost E.is the thermal heating F.nevozmozhnost
2793..pecify the key lighting units, characterizing lighting: A.Natural* B.PU* C. combined* D.gigienecheskoe E.technological F.economic
2794.Specify the basic lack of production of natural lighting: A. uneven* B.Thermal heating* C.inability to * D.bokovoe E.Upper F.Fixed-combination
2795. advantages artificially light sources: A. possibility of equipment in all industries* B.nezavisiost on climatic and temporal characteristics* C.Possibility of redistribution of the luminous flux* D.Direct E.reflections F.rasseyannogo
2796. What kind of natural lighting devices: A. side* B. Top* C. combined* D.time vision E.time not seeing F.time experience
2797.contrast (K) with the background of the object of discrimination and their criteria: A.large - more than 0.5 K* B. middle - K from 0.2 to 0.5* C. small - up to 0.2 K* D. Large - more than 11 K E.is the mean - For 8 to 11 F.Small - K to 8
2798.types of lamps for redistribution of the luminous flux: A.direct* B.reflected* C.scattered* D.Create optimal working conditions E.Decrease in injury F.security
2799. to determine the stability of koeffetsenta clear vision: A.Time Vision* B. time not seeing* C. Time Experience* D.the possibility of the equipment under all industries E.nezavisiost on climatic and temporal characteristics F.The possibility of redistribution of the luminous flux
2800. What is the criteria to ergometric severity of labor: A. shipping velechiny* B. the power operation* C. rabochnaya posture* D.minutny obym breathing E.minutny obym blood F.is the magnitude of the static
2801. What types of researches are carried out by this device: A. measurement of noise and vibration* B. measurement of EMF C. humidity measurement D. measurement of temperature E. illumination measurement
2802. The psychrometer consists of what thermometers: A. dry and damp thermometer* B. damp thermometer C. dry thermometer D. psikhroanemometra E. electrothermometer
2803. Where the IShV-1 device microphone is placed: A. on a workplace* B. century at a window C. page on the street D. in a restroom E. in a director's office
2804. For what the electroaspirator is intended: A. for measurement of dust on workplaces to aspiration methods* B. for dispersion dust measurement C. for measurement of chemicals D. for determination of humidity E. for determination of temperature
2805. For what parameter of a microclimate the doctor on occupational health determines by this device: A. for definition of the thermometer of air on a workplace* B. for determination of humidity of air C. for determination of infrared radiation D. for determination of speed of the movement of air E. for determination of illumination
2806. As intensity of noise is measured: A. to install the toggle-switch in situation - a sound, a sort of measurements – lean, a work sort – quickly* B. to install the toggle-switch in situation – a sound, a sort of measurements – the filter, a work sort - slowly C. to install the toggle-switch in situation - vibration, a sort of measurements – lean, a work sort - slowly D. to include food and to measure on decibels E. to include food and to measure on frequencies
2807. What device determines air movement speed: A. anemometer* B. psychrometer C. micromanometer D. actinometer E. thermometer
2808. Results of measurements of illumination are brought in what protocol: A. registration form 334th B. registration form 335th C. registration form 336th D. registration form 330th E. registration form 301st
2809. What types of anemometers you know? A. vane, cup * B. vane, vascular C. thermal, electric D. mobile, round E. barometric, cup
2810. By means of what devices physiological methods of research CVS are measured: A. pulsotachometer, tonometer, Starr's formula* B. thermograph, pulsotachometer C. tonometer, bagofdouglas D. thremometr, chronoreflexometer E. dynamometer, pulsotachometer
2811. For what the worker's picture is taken: A. for the characteristic and an assessment of a working pose* B. for definition of a bearing C. for the hygienic characteristic D. for work performance E. for physiological researches
2912. At what influence of factors the IShV-1 audio-noise meter measuring instrument is used: A. noise and vibration* B. lighting and ventilation C. noise and lighting D. relative humidity temperature E. noise and humidity
2813. The system for definition of a dust content of air of a working zone by a weight method consists of what devices: A. allonge, filter, scales, eletroaspirator* B. light meter, nozzles, photo cell C. allonge, psychrometer, gas analyzer D. filter, actinometer, gas analyzer E. scales, IShV-1, light meter
2814. The light meter consists of what parts: A. photo cell, nozzle and galvanometer* B. a nozzle and the perceiving part C. the absorbing part and the perceiving part D. from 3 nozzles E. galvanometer and nozzles
2815. What filters are used for definition of a dust content of air: A. AFA and FPP filters* B. FP and KA filters C. AS and MI filters D. PS and PU filters E. SSh and EA filters
2816. By means of what device muscular force is defined: A. dynamometer* B. dinamograf C. chronoreflexometer D. potentiometer E. thermometer
2817. By means of what device muscular endurance is defined: A. mercury dynamometer* B. thermograph C. thermometer D. manometer E. Starr's formula
2818. What parts for measurement of a dust content of air are represented in drawing: A. allonge, filter paper* B. scales, filter paper C. gas analyzer D. IShV-1 E. light meter
2819. What device is represented in drawing: A. Yu-116, Yu-117 light meter* B. argus-01 C. IShV-1 D. TsAGImicromanometer E. psychrometer
2820. What indicator of CVS is measured by means of this device: A. pulse* B. arterial pressure C. muscular endurance D. shock volume of blood (SVB) E. minute volume of blood (MVB)
2821. For what analytical scales are intended and that by means of them is defined: A. weighing of the filter and definition of a dust content of air* B. weighing of the allonge and definition of a dust content of air C. to weigh an aspirator and to define dust D. to weigh air E. to weigh ware and to calculate calculations
2822. For what definition of factors there are reometrs in an aspirator: A. for dust and for chemicals* B. for noise and vibration C. for chemical and biological substances D. for dust and humidity E. for EMF and the laser
2823. By means of what device it is possible to measure pulse rate: A. pulsotakhometer* B. anemometer C. bioheat meter D. electrothermometer E. stop watch
2824. What parameters are specified in the spectrogram of noise: A. frequency and intensity of noise* B. frequency and amplitude C. speed and vibration acceleration D. range of noise and range E. time and frequency
2825. What type of work belongs to brainwork: A. operator work* B. seamstresses C. plumbers D. electric welders E. builders
2826. What else indicators are measured at functional research CVS: A. pulse, arterial pressure, shock volume of blood (SVB), minute volume of blood (MVB)* B. pulse, muscular endurance C. pulse, arterial pressure D. MOK, UOK, pulse E. muscular force, pulse
2827. By what device arterial pressure is defined? A. tonometer, PAV-01* B. tonometer, gigrograf C. pulsotakhometer D. PAV-01, electrocardiogram E. thermograph
2828. What types of lamps are represented in drawing: A. «Universal» lamps, ODlamps* B. SMO, ML lamps C. PVL-1, ODO lamps D. «Glubokoizluchatel» lamp, A. PM-1 E. SH-5000M, PM-1 lamps
2829. For what the thermometer is intended? A. for measurement of air temperature* B. for humidity measurement. C. for measurement of speed of the movement of air D. for definition of a chemical factor E. for measurement of speed of the movement of air
2830. What sources of artificial light happen: A. glow lamps, gas-discharge lamps* B. general lamps, local lamps C. neon and xenon lamps D. console lamps, mechanical lamps E. active lamps, passive lamps
2831. What individual means of protection are represented in drawing: A. respirators, gas masks* B. antiphons, earplugs C. boots, gloves D. creams, ointments E. points, helmets
2832. Of what parts consists dynamochronoreflexometer: A. dynamometer and chronoreflexometer* B. dynamometer and KChZSM C. tremometr and chronoreflexometer D. PAV-01 and tremometr E. dynamometer and atmograph
2833. That is represented in drawing and for what these means of individual protection are intended: A. the goggles intended for protection of eyes* B. the antiphons intended for protection of organs of hearing C. the earplugs intended for protection of organs of hearing D. respirators, for protection of respiratory organs E. gas masks, for protection of breath
2834. For what the audiometer is intended: A. for research of noise on a functional condition of an organism working* B. for functional research of vibration C. for measurement of intensity of noise D. for measurement of intensity of vibration E. for a noise assessment on an organism
2835. By what device we determine impact of noise on a functional condition of an organism of the working? A. audiometer* B. psychrometer C. actinometer D. vibrotest rum E. audio-noise meter
2836. What means of individual protection are represented in drawing and for what they are intended: A. guards, helmets, space suits which are intended for protection of the head* B. respirators, gas masks which are intended for protection of respiratory organs C. creams, ointments, for protection of skin D. guards, points, for protection of the head E. boots, masks, for protection of a body
2837. What device is used for definition of reaction of CVS: A. PAV-01* B. light meter C. aspirator D. psychrometer E. gas analyzer
2838. What new device measures intensity of production noise: A. SVAN-943 audio-noise meter* B. vibrotester C. audiometer D. vibromeasuring instrument E. katatermometry
2839. For what the device represented in drawing is used: A. for measurement of response to a sound, light, heat* B. for measurement of response to a sound, irritant C. for measurement of critical frequency on light D. tremor of hands E. for measurement of temperature
2840. What device is represented in drawing: A. Assman'spsychrometer* B. chronoreflexometer C. gas analyzer D. light meter E. IShV-1
2841. What production factors arise in thermal shops: A. high temperature, lead metals, infrared radiation* B. high temperature, high humidity, chemical factors C. dust, solvent, mercury vapors D. high pressure, dust, noise E. chemical factor, adverse microclimate, noise, vibration
2842. What speeds of the movement of air are defined by means of the cup anemometer: A. from 1 to 30 m/s* B. from 1 to 10 m/s C. from 0 to 10 m/s D. from 1 to 20 m/s E. from 1 to 50 m/s
2843. Corners for an assessment of a working pose are compared to what indicators: A. with optimum goniometricresults* B. with the epure C. with indicators of a working pose D. on Notkin's scale E. on an audiogramma
2844. By what anemometer measure, when the speed of the movement of air from 1 to 10 m/s: A. vaneanemometer* B. the cup C. electroanemometer D. katatermometry E. actinometer
2845. What profession is represented in drawing, and on what productions it meets: A. the electric welder's profession, at installation and construction works, in mechanical engineering* B. the turner's profession, at installation works C. the mechanic's profession, when processing metal D. profession of the painter, transport industry E. driver's profession
2846. What device is represented in drawing and for what it is intended: A. the actinometer, for measurement of infrared radiation* B. the psychrometer, for measurement of relative humidity C. the anemometer, for measurement of speed of the movement of air D. the thermometer, for measurement of temperature E. the light meter, for illumination measurement
2847. How many points are defined for an assessment of a working pose: A. 9* B. 10 C. 6 D. 7 E. 5
2848. What devices are used for measurement of parameters of a microclimate: A. psychrometer, anemometer, actinometer* B. IShV-1, вибротестр, psychrometer C. chronoreflexometer, PAV-01 D. light meter, psychrometer E. aspirator, allonge, actinometer
2849. What specific household rooms are recommended to organize for miners: A. fotariy* B. respiratoriy C. ingalyatoriy D. room of psychological unloading E. room of smoking
2850. At the workers working in thermal shop high temperature of skin of a body is observed. What device possibly measurement: A. electrothermometer* B. chronoreflexometer C. psychrometer D. anemometer E. actinometer
2851. What occupational disease arises with a low pressure? A. high-rise illness* B. lacunar illness C. increase of arterial pressure D. saturnizm E. mercurialism
2852. By means of what device transfer of heat of an organism by radiation is measured: A. radiometer* B. gas analyzer C. thermometer D. psychrometer E. anemometer
2853. General indicators of quality of special clothes: A. operational, hygienic and esthetic* B. economic, esthetic C. qualitative, durability D. impermeability of water, stability E. hygienic, economic
2854. What fields are measured by means of the IEMP-1 device: A. electric and magnetic* B. electric and thermal C. laser, mazerny D. high-frequency and low-frequency E. the magnetic
2855. What device is represented in drawing: A. audio-noise meter (SVAN-943)* B. IShV-1 audio-noise meter C. anemometer D. gas analyzer E. AM-5
2856. What device investigates a functional condition of the acoustic analyzer: A. audiometer* B. psychrometer C. anemometer D. gas analyzer E. light meter
2857. What device investigates vibration sensitivity: A. kapillyaroskopy* B. audiometer C. chronoreflexometer D. psychrometer E. anemometer
2858. What data register in a vibrogramma: A. a surname, a name working, length of service, a sex, age, a profession and time of functional research* B. a surname, a name working, a floor a profession, the diagnosis C. sex, age, length of service, profession D. surname name age and floor of the working E. time of functional research, profession, harmful factors
2859. Who instructs on production against a trauma: A. safety engineer* B. chief engineer C. foreman D. the producer on production E. shop doctor
2860. What device carries out an express method of definition of amount of chemicals in air of a working zone: A. AM-5 microaspirator* B. psychrometer C. anemometer D. gas analyzer E. chronoreflexometer
2861. How many hours according to the plan in a month are allocated to the doctor on occupational health for carrying out sanitary and educational work: A. 4 hours* B. 2 hours C. 3 hours D. 6th hour E. 1,5 hours
2862. In what ways enter chemical into an organism of animals for toxicological researches: A. intratracheal, skin, intragastric* B. through genitals C. through the head D. intravenously E. rektal
2863. As the inhalation method is carried out A. by means of statistical and dynamic cameras* B. by means of a microaspirator C. by means of the actinometer D. by means of a hronorefleksometr E. by means of the light meter
2864. What unit at artificial lighting: A. luxury* B. ampere C. %. D. dB E. candela
2865. What is the production trauma: A. violation of anatomic integrity of an organism, its violations of physiological functions connected with working conditions* B. violation of integrity of an organism for working conditions C. physiological changes in an organism D. the trauma arising on production and thus is broken integrity of an organism E. violation of anatomic and physiological shifts in an organism due to production
2866. What ventilating systems are used when a harmful factor is dust: A. the general stitched and local exhaust* A. air panels, all-exchange B. the general stitched and general exhaust C. air veils, air panels D. the local exhaust E. stitched, utechny
2867. Producing departments in mechanical engineering: A. foundry, forge and press, thermal* B. turning, assembly, welding C. welding, molar, procuring D. foundry, thermal E. preparatory, assembly, assembly
2868. After illumination measurement, the obtained data are brought in: A. protocol to the 335th* B. protocol to the 330th C. protocol to the 334th D. protocol to the 333rd E. protocol to the 301st
2869. In what situations lighting fixtures are used: A. for protection against vapors and gases* B. for protection of biological substances C. for protection of noise D. for protection of vibration E. for protection of EMF
2870. That treats hygienic requirements in relation to means of individual protection (MIP): A. comfort and availability* B. a fencing from environment C. profitability D. comfort E. the weakening action
2871. What are used points for protection of eyes against influence of EMF: A. metallized, mesh* B. the plastic C. the reflecting D. the mirror E. the driver's
2872. Main stages of technological process of sewing production: A. preparatory, shop of cutting, sewing* B. shop of cutting, ironing office C. preparatory, sewing, finished goods warehouse D. shop of cutting, finishing E. initial, the main, final
2873. Prevention measures at traumatism: A. technological, sanitary, medical-preventive* B. technological preventive, special C. planned, technological, medical-preventive D. sanitary, medical-preventive E. observance of MIP, automation, gardening
2874. The most radical measures of prevention for employees of mechanical shop: A. decrease in an education source* B. periodic medical survey C. systematic control over noise level only in the first change D. rational work-rest schedule E. sanitary educational work
2875. What means of individual protection are applied during the welding works: A. points, guard, gloves* B. special clothes, helmet C. points, guard, rubber gloves D. rubber apron E. points, guard
2876. What dust by origin at the enterprises of light industry? A. fibrogenny* B. the sensibilizing C. the irritating D. the vegetable E. the mixed
2877. What types of researches are carried out by this device: A. measurement of noise and vibration* B. century measurement of EMF C. page humidity measurement D. measurement of temperature E. illumination measurement
2878. Where the IShV-1 device microphone is placed: A. on a workplace* B. century at a window C. page on the street D. in a restroom E. in a director's office
2879. As intensity of noise is measured: A. to install the toggle-switch in situation - a sound, a sort of measurements – lean, a work sort – quickly* B. to install the toggle-switch in situation - vibration, a sort of measurements – lean, a work sort - slowly C. to install the toggle-switch in situation – a sound, a sort of measurements – the filter, a work sort - slowly D. to include food and to measure on frequencies E. to include food and to measure on decibels
2880. Results of measurements of production noise are brought in what protocol: A. to the ф/334tt* B. to the ф/335th C. to the ф/336th D. to the ф/330th E. to the ф/301st
2881. As the result of measurements pays off: A. by results of not less than 3 measurements average size pays off* B. 2 measurements, everyone separately C. only 1 time is measured D. it is measured to, in time and after work E. it is measured during rest
2882. Necessary devices for definition of a dust content of air of a working zone: A. allonge, filter, scales, aspirator*
B. scales, IShV-1, light meter C. allonge, psychrometer, gas analyzer D. filter, actinometer, gas analyzer E. light meter, nozzles, photo cell
2883. What filters are used for definition of a dust content of air: A. AFA and FPP filters* B. FP and KA filters C. AS and MI filters D. RS and PU filters E. SSh and EA filters
2884. To what adaptation the filter is fixed: A. allonge* B. scales C. gas analyzer D. IShV-1 E. lightmeter
2885. For what analytical scales when the air dust content is defined are necessary: A. to weigh the filter* B. toweightheallonge C. to weigh an aspirator D. to weigh air E. toweighware 2886. What reometrs are available in an aspirator: A. for dust and for chemicals* B. for noise and vibration C. for chemical and biological substances D. for dust and humidity E. for EMF and the laser
2887. What type of work belongs to brainwork: A. operator work* B. electric welders C. seamstresses D. plumbers E. builders
2888. Systems of lighting: A. the general, local, combined* B. physical, chemical C. biological, natural D. natural, artificial E. the general, localized
2889. Light sources – lamps: A. glow lamps, gas-discharge lamps* B. neon and xenon lamps C. general lamps, local lamps D. active lamps, passive lamps E. console lamps, mechanical lamps
2890. Means of individual protection of respiratory organs: A. respirators, gas masks* B. antiphons, earplugs C. boots, gloves D. creams, ointments E. points, helmets
2891. Means of individual protection of eyes: A. goggles * B. antiphons C. earplugs D. respirators E. gas masks
2892. Means of individual protection of the person: A. guards, helmets * B. respirators, gas masks C. creams, ointments D. gloves, points E. boots, masks
2893. What device is used for definition of reaction of CVS: A. PAV-01* B. light meter C. aspirator D. psychrometer E. gas analyzer
2894. For research of a functional condition of CNS the device is used: A. chronoreflexometer* B. light meter C. psychrometer D. actinometer E. aspirator
2895. For research of humidity of air the device is used: A. Assman'spsychrometer* B. light meter A. chronoreflexometer C. gasanalyzer D. ISHV-1
2896. What device is used for measurement of speed of the movement of air: A. anemometer* B. chronoreflexometer C. psychrometer D. actinometer E. aspirator
2897. What types of anemometers happen: A. cup, vane* B. weight, tortsionnly C. analytical, digital D. mechanical, console E. chemical, biological
2898. What device is used for measurement of intensity of thermal radiation: A. actinometer* B. psychrometer C. anemometer D. thermometer E. light meter
2899. What devices are used for measurement of parameters of a microclimate: A. psychrometer, anemometer, actinometer* B. light meter, psychrometer C. aspirator, allonge, actinometer D. IShV-1, вибратестр, psychrometer E. chronoreflexometer, PAV-01
2900. What device is used for definition of a thermal state organism: A. electrothermometer* B. psychrometer C. chronoreflexometer D. actinometer E. anemometer
2901. What device investigates transfer of heat of an organism by radiation: A. radiometer* B. gas analyzer C. psychrometer D. thermometer E. anemometer
2902. What device measures intensity of EMF: A. IEMP-1* B. IShV-1 C. PAV-01 D. light meter E. psychrometer F. anemometer
2903. What device measures intensity of noise: A. audio-noise meter* B. actinometer C. psychrometer D. anemometer E. gas analyzer
2904. What device investigates a functional condition of the acoustic analyzer: A. audiometer* B. psychrometer C. anemometer D. gas analyzer E. light meter
2905. What device investigates vibration sensitivity: A.capillaroscope* B.audiometer C.phronorefleksometer D.psychrometer E.anemometer
2906. When functional researches are conducted: A.to, in time, after work* B.during meal C. before rest D.before going to bed E.during rest
2907. The express a method of definition of amount of chemicals in air of a working zone: A.AM-5 microaspirator* B.psychrometer C.anemometer D.gas analyzer E.phronorefleksometer
2908. Ways of introduction of chemicals to an organism of animals: A.intratrakheal, skin, intragastric* B.through genitals C.through the head D.intravenously E.rektal
2909. As the inhalation method is carried out: A.by means of statistical and dynamic cameras* B.by means of a microaspirator C.by means of the actinometer D.by means of a hronorefleksometr E.by means of the light meter
2910. What device measures illumination level: A. light meter* B. anemometer C. psychrometer D. actinometer E. IShV-1
2911. After illumination measurement, the obtained data are brought in: A. protocol to the 335th* B. protocol to the 330th C. protocol to the 334th D. protocol to the 333rd E. protocol to the 301st
2912. For what lighting fixtures are used: A. for protection against vapors and gases* B. for protection against biological substances C. for protection against noise D. for protection against vibration E. for protection against EMF
2913. Hygienic requirements to MIP: A. comfortable, available* B. a fencing from environment C. the active D. the passive E. the weakening
2914. What are used points for protection of eyes against influence of EMF: A. metallized, mesh* B. the plastic C. the mirror D. the reflecting E. the driver's
2915. Main stages of technological process of sewing production: A. preparatory, shop of cutting, sewing* B. shop of cutting, ironing office C. preparatory, sewing, finished goods warehouse D. shop of cutting, finishing E. initial, the main, final
2916. Fight, what of methods, against noise is the most radical if in mechanical shop workers are affected by noise during all change? A. decrease in an education source* B. decrease by application of antiphons C. systematic control over noise level only in the first change D. periodic and preliminary medical examinations E. instructing of workers
2917. What effect of dust will be the leader at the enterprise of light industry? A. fibrogenny* B. the toxic C. the irritating D. the local E. the mixed
2918. In what situation the doctor issues the decree on closing of production object: A. at emergence of the chronic prof. of a disease, failure of a seal* B. in the absence of means of individual protection C. with a low productivity of ventilation D. at the complaints working E. at low illumination
2919. Than the production microclimate is characterized? A. temperature, humidity, mobility of air and thermal radiation* B. relative humidity, potoispareniye, radiation, thermal capacity C. temperature, absolute humidity, barometric pressure D. temperature, air movement speed, heat production E. noise, vibration, dust
2920. Periods of physiological researches: A. before work, in operating time and after work* B. every first and fourth week of month C. before work and after work D. middle of month and every quarter E. at the request of workers
2921. In what indicators the combined lighting is normalized: A. coefficient of natural lighting (CNL), %* B. luxury C. lumen D. candela E. decibel
2922. Specify stages of technological process on the cotton cleaning plants, where the leading factor dust? A. divisions of cotton fiber from cotton down and cleaning* B. preparation of raw materials C. neutralization of cotton seeds D. pressing E. sorting
2923. Call ways of coloring of products: A. the chemical B. the physical C. manual, immersion, pulverization* D. the mechanized E. the biological
2924. List medico-preventive actions in hot shops: A. mechanization B. automation C. ventilation D. providing MIP, preliminary and periodic medical surveys* E. shielding
2925. What is necessary for an assessment of a working pose? A. epure, constructed according to the photo of a working pose in a profile* B. sketch of the room C. data of a technological condition of the equipment D. photographic image of a working pose behind E. photographic image of a working pose in front
2926. List the symptoms which are shown because of influence of the heating microclimate at women: A. tachycardia * B. decrease in sight C. change of hearing D. change of sense of smell E. nausea
2927. What tension of groups of muscles is observed when carrying out thinning of a cotton? A. backs, hands* B. lower extremities C. feet D. forearms E. muscles of eyes
2928. Call the prof. of a disease of employees of hot shops: A. hyperthermia, cataract* B. hepatitis C. miozit D. dermatitis E. pleurisy
2929. For what terms the doctor on occupational health analyzes incidence: A. in a quarter, half-year, 9 months, year* B. for the last 3 years C. in a half-year in comparison with previous year D. over the last 5 years E. over the last 10 years
2930. What questions are taken up at introduction and repeated instructing? A. harmful factors, symptoms of poisonings, measures of first aid* B. acquisition of knowledge of ecology C. training of public sanitary instructors D. expansion of an outlook, acquisition of hygienic skills E. results of medical examination
2931. How many stages of precautionary sanitary inspection behind construction: A. four* B. five C. rub D. two E. one
2932. As states of doctors of CNS on occupational health are estimated: A. 1 doctor on 10 thousand working* B. 1 doctor on 14 thousand working C. 1 doctor on 60 thousand working D. depending on number of the enterprises E. depending on quantity of diseases
2933. Give examples of harmful production factors: A. chemical, noise, vibration* B. light C. employment D. concern E. alarm
2934. Production dust is the leading factor of the production environment: A. mining industry* B. chemical companies C. textile productions D. skinneries E. printing productions
2935. What type of shelter of local exhaust ventilation is most effective: A. hood* B. onboard suctions C. exhaust umbrella D. exhaust panels E. casing
2936. Types of works when MIP are surely applied: A. emergency, repair* B. medicine C. agriculture D. trade E. drivers
2937. How control of the course of construction of industrial facilities is often carried out? A. 1 quarterly* B. once a month C. 2 times a year D. prestarting period E. every year
2938. List the methods which are most often applied to the analysis of tests of air on the content of chemicals: A. the electrochemical, phromatografic* B. the calorimetric C. the photochemical D. the goniometric E. the physiological
2939. Call the devices used for an express method: A. glass syringe, universal gas analyzer of UG-1, AM- 5 gas analyzer* B. light meter C. gas analyzer D. вибратестр E. NFM-1
2940. Call a registration form of account for measurements of speed of the movement of air: A. protocol of measurement of noise and vibration, t. 334/at B. emergency notices, t. 058/at C. conclusion of medical commission, t. 083/at D. out-patient card, t. 025/at E. protocol of measurement of meteofactors, t. 336/at*
2941. In what of the given cases it is necessary to define the content of chemicals in air of a working zone: A. at investigation of cases of the prof. of poisonings* B. at sanitary examination of construction projects C. at control of the construction course D. according to the indication of administration of plant E. at sanitary examination of household rooms
2942. List productions where the meteorological factor is one of leaders: A. printing production B. mechanical engineering, hot shops* C. car repair enterprises D. medicine E. production of food
2943. What indicators characterize vibration? A. frequency, vibrospeed, vibration acceleration* B. intensity, speed, shift C. intermittence, speed, height D. stability, intensity E. power, specific weight
2944. Call MIP the protecting feet: A. boots * B. antiphon C. earplugs D. creams E. points
2945. Specify sequence of rationing of chemical? A. approximate safe level of substance, maximum concentration limit, change in maximum concentration limit* B. determination of coefficient of a stock, approximate safe level of substance, maximum concentration limit C. maximum concentration limit, maximum- permissible level, GOST D. determination of physical properties, maximum- permissible level, GOST E. studying of technological process, tool research
2946. The doctor on occupational health at an assessment of a production microclimate compares the measured sizes to what norms: A. optimum* B. average values C. admissible on constant workplaces D. admissible on changeable workplaces E. maximum concentration limit
2947. At what temperature of external air the period of year belongs to the warm? A. it is higher than + 100C* B. it is higher than + 200C C. +50C and below D. +100C and below E. 00C
2948. The main control method of the EMF level is: A. tool measurement of the EMF levels* B. subjective feeling of influence of EMF C. clinical data D. physiological data E. the bacteriological
2949. Zones round a source of electromagnetic fields: A. near (wave), intermediate (interferences), distant (induction) of a zone* B. near and far zones C. zone of sharp and chronic action D. intermediate and distant zones E. opened, closed
2950. What diseases are caused by the compelled working pose? A. curvature of a backbone, mialgiya* B. tuberculosis of lungs C. oncological diseases D. neuralgia E. neurosises
2951. By means of what devices the muscular system is investigated? A. dynamometer* B. galvanometer C. tonometer D. tachometer E. anemometer
2952. In what bodies and systems it is noted considerable shifts at mental work? A. CNS and CVS* B. in thermoregulatory mechanisms C. secretory system D. respiratory system E. sexual system
2953. Maximum-permissible loadings for women in RUz: A. the mass of once lifted freight of 15 kg* B. the mass of the lifted freight in day to 25 kg C. the mass of once lifted freight of 25 kg D. the mass of freight is 35 kg E. the mass of freight is 50 kg
2954. That is the perceiving part of the actinometer: A. thermobattery* B. galvanometer C. case D. device scale E. holder
2955. What main objective of the doctor on occupational health at a hygienic assessment of production ventilation in mechanical shops: A. efficiency assessment* B. determination of productivity C. determination of frequency rate of air exchange D. assessment of correctness of placements of air ducts E. microclimate assessment
2956. What production factors are formed during the operation of the laser? A. specific, nonspecific* B. the increased humidity C. the increased air temperature D. physical tension E. noise
2957. At an assessment of a working pose the obtained data with what indicators are compared: A. the goniometric* B. the physiological C. the physical D. the biological E. the optimum
2958. What unit expresses illumination? A. luxury* B. candela C. Watt D. lumen E. dB
2959. What admissible level of intensity of noise of dBA on production: A. 80* B. 100 C. 150 D. 200 E. 250
2960. The infrasound has considerable impact on: A. acoustical and vestibular devices* B. cardiovascular system C. motor function of a stomach D. functional condition of a liver E. genitals
2961. When the tremometriya is carried out? A. to, in time, after work* B. after a lunch C. before going to bed D. before leaving E. each 0,5 hours
2962. What is the inconvenient working pose? A. followed by tension of all body* B. followed by the minimum tension of muscles C. followed by the maximum tension of muscles D. followed by high temperature E. followed by low productivity
2963. At inspection of working conditions at radar station microwave field power is measured. What it is necessary to consider for comparison with hygienic norm? A. to consider time of day when comparing B. noise and ultrasound C. microclimate parameters, vibration D. air temperature and operating time with this factor* E. chemical factor
2964. Point "a constant workplace" to the correct definition: A. a working zone where the working is more than 50% of working hours or 2 hours continuously* B. a permanent residence of the working not less than one hour per change C. a working zone where the working is more than 30% of working hours D. a working zone where the working is more than 80% of working hours or not less than 4 hours E. a place where is working during all change
2965. What equipment is necessary for a total characteristic of production noise: A. audio-noise meter, range analyzer, tape recorder* B. galvanometer, sound analyzer C. VT-2, audiometer, HB-1 D. vibration pen, tape recorder, audiometer E. barometer, galvanometer, analyzer
2966. What method is used for studying of influence of labor process on functional conditions of an organism and efficiency of the person? A. timing method* B. phronorefleksometriya C. indirect calorimetric method D. direct calorimetric method E. tremometriya
2967. What electromagnetic oscillations of wavelength belong to ultra-violet radiations: A. 400-200 nanometers* B. 1 sm – 1mm C. 3-10 m D. 180 nanometers-130 nanometers E. 760nm-1 mm
2968. By what device it is possible to measure various speeds of the movement of air: A. electrothermoanemometer and digital anemometer* B. cup anemometer C. psychrometer D. katatermometry E. actinometer
2969. What device measures return of heat by an organism by radiation: A. radiometer * B. teplometry C. actinometer D. anemometer E. psychrometer
2970. Intensity of thermal radiation is measured in what units, by the actinometer and at what it is estimated according to sanitary standards: A. in kal/sm2min and Watts/m2* B. in kcal/sm2 of mines in degrees Celsius C. in % and degrees Celsius D. in % and kcal/sm2 of mines E. in kcal and degrees Celsius
2971. As vibration sensitivity under the influence of local vibration is measured: A. decreases B. increases C. doesn't change D. decreases only at intensive vibration E. changes only with contributing factors
2972. By what device vibration sensitivity is defined: A. vibrotester* B. VShV-003 C. IShV-1 D. NOM-1 E. MB-4M
2973. How to change heat production at a temperature of +15 … + 200C: A. doesn't change* B. increases C. decreases D. minor change E. can or will increase or will decrease
2974. Call relative humidity of air: A. the relation of absolute humidity to maximum, expressed in %* B. ability of an organism to increase heat production depending on microclimatic conditions C. speed of the movement of air, temperature connected in a difference between air layers D. amount of water vapor in grams E. all water vapor which can sate 1 m3 of air
2975. What main ways of return of heat an organism at high relative humidity and normal temperature: A. carrying out, convection* B. with the exhaled air C. conduction D. radiation E. sweat evaporation
2976. What is the absolute humidity? A. amount of water vapor in the grams containing in 1 cubic meter of air at the time of research* B. it amounts of heat, available in an air molecule C. the air movement connected in temperature difference between air layers D. invisible electromagnetic radiations E. this amount of humidity, available as a part of air
2977. What screens from EMF happen? A. metal, mesh, continuous* B. the cardboard C. the transparent D. the reflecting E. the vitreous
2978. In what zone of high-frequency radiation there will be most often a worker? A. interferences B. to a wave zone C. induction* D. a zone of the increased radiation
E. in a zone of the lowered radiation
2979. Intensity of electric field of ultrahigh frequency is measured in what units? A. A/m B. Wt/m2 C. mkWt/sm2 D. Pas E. B/m*
2980. What is the combined production lighting? A. one-stage use of natural and artificial light for lighting* B. the local and localized lighting C. the combined system of lighting D. natural lighting the bilateral side E. one-stage use with ventilation
2981. Call main types of MIP from vibration: A. antiphons, earphones B. respirator C. boots, gloves* D. aprons E. creams
2982. How optimum labor movements are defined? A. on nature of the performed work* B. on weight of work C. on compliance to their anatomo-physiological features of an organism D. on intensity of work E. on the body weight of the worker
2983. What is investigated by a dynamometer? A. muscular force, endurance* B. humidity C. noise D. pulmonary ventilation E. chemical factor
2984. List the main groups of the rooms which are a part of the sanitary and household: A. wardrobe, shower* B. first-aid post, bathrooms C. corridor D. engineer's office E. shop
2985. When manual and foot bathtubs are arranged? A. the work connected with vibration* B. work in hot shops C. work with noise D. in the absence of a daylight E. at a dust content
2986. What types of guards happen for protection of the person: A. guards on head fastening, guards with the handle* B. respirator C. boots D. aprons E. antiphon
2987. List symptoms at impact of vibration on a female organism: A. violation of a menstrual cycle* B. decrease in sight C. hypotonia D. gipersalivation E. dermatitis
2988. At what way of processing of a cotton pesticides more considerably pollute environment: A. at an aviation way* B. at a rantsevy way C. at a tractor way D. at manual processing E. at the mechanized way
2989. Whatisinvestigatedhronorefleksometry? A. a functional condition of CNS on light and a sound* B. functional condition of respiratory system C. thermolysis D. the cooling microclimate E. chronic disease
2990. How the working pose is determined by an epyur? A. by measurement and an assessment of size of interarticular corners* B. by creation of the sketch C. distance between the worker and the machine D. by calculation of percent E. by timing studying
2991. Main parts of the light meter: A. photo cell, nozzle and galvanometer* B. a nozzle and the perceiving part C. the absorbing part and the perceiving part C. from 3 nozzles D. galvanometer and nozzles
2992. By means of what device muscular endurance is defined: A. mercury dynamometer* B. thermograph C. tremometer D. monometer E. Starr's formula
2993. The parameters which are specified in the spectrogram of noise: A. frequency and intensity of noise* B. frequency and amplitude C. speed and vibration acceleration D. range of noise and range E. time and frequency
2994. By what device arterial pressure is defined? A. tonometer, PAV-01* B. tonometer, gigirograf C. pulsotakhometry D. PAV-01, electrocardiogram E. thermograph
2995. For what the thermometer is intended? A. for measurement of temperature воздуха* B. century for humidity measurement C. for measurement of speed of the movement of air D. for definition of a chemical factor E. for measurement of speed of the movement of air
2996. For what this device is intended: A. for functional research of noise on an organism of workers* B. century for functional research of vibration C. for measurement of intensity of noise D. for measurement of intensity of vibration E. for a noise assessment on an organism
2997. What anemometer measures the speed of the movement of air at from 1 to 10 m/s: A. vane* B. the cup C. electroanemometer D. the mechanical E. katatermometer
2998. What specific household rooms are recommended for miners: A. fotariy* B. respiratoriy C. ingalyatoriy D. room of psychological unloading E. room of smoking
2999. What project (plan) is represented in drawing? A. situational plan* B. general plan C. project household rooms D. projectof a production system of lighting E. project production system of ventilation
3000. What project (plan) is represented in drawing? A. situational plan B. general plan C. project household rooms* D. project of a production system of lighting E. project production system of ventilation