Specifications Annotator 300

zz For manuals, use the standard Section style instead of Chapter title, specs sheet or Heading 1, specs stand-alone; and use Heading 1 as usual for “Specifications” if the specs are part of a multitopic chapter. input zz Click the text tool where you want to insert the specs table, select the specs table Number/signal type ������������������������ 1 RGB, RGBcvS, component (interlaced, progressive, HD), S-video, composite container paragraph style, then paste in the specs table from the stand-alone master video specs sheet. 1 HDMI (HDCP compliant) zz For specifications from template v7.6 or earlier, use this guide to which new paragraph 1 DisplayPort (HDCP compliant) style replaces which old style: Connectors ������������������������������������ 1 female 15-pin HD 1 female HDMI zz Specs8_Heading 2 replaces SpecsSubHdr 1 female DisplayPort zz Specs8_L1 “ Specs7 Nominal level ��������������������������������� 1 Vp-p for Y of and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video zz Specs8_L1 cont’d “ Specs7A 0.3 Vp-p for C of S-video zz Specs8_L2 “ Specs7 subcategory Minimum/maximum levels �������������� Analog: 0.0 V to 1.0 Vp-p with no offset at unity gain zz Specs8_L3 “ Specs7 sub-subcategory Impedance ������������������������������������� 75 ohms Horizontal frequency ���������������������� 15 kHz to 100 kHz zz Specs8_Note “ SpecsNote7 Vertical frequency ��������������������������� 24 Hz to 75 Hz zz Specs8_Warning/Caution “ Specs7Warning/caution Resolution range zz Specs8_ Revision code “ Revision code VGA and HDMI ������������������������ 640x480 to 1600x1200 and 1920x1200* NTSC, PAL, SECAM, , , , 576p, , , , and 2k zz The other new styles are required for proper table placement/formatting (one for the DisplayPort ������������������������������ 640x480 to 1600x1200 and 2560x1600* entire specs table as placed within a manual section [specs table conteiner], two others 480p, 576p, 720p, 1080i, 1080p, and 2k [Specs8_Note L1 table and Specs8_Note L2 table] for the note/caution cells *reduced blanking within the specs table). Return loss ������������������������������������� <-30 dB @ 5 MHz DC offset (max. allowable) ������������� 0.5 V zz At this time, the notes, cautions, and warnings boxes/tables within specs have to Standards ��������������������������������������� DVI 1.0, HDMI, DisplayPort 1.1a, HDCP be hand inserted and merged and formatted. Use the existing table styles (NOTE, Caution, and Warning1) for the table boxes. Decoder ����������������������������������������� 12 bit digital (3D-adaptive comb filter) zz Apply the Specs8_Note L1 table or Specs8_Note L2 table paragraph style Analog sampling ���������������������������� 12 bits per color; 13.5 MHz standard (video), 170 MHz standard (RGB) (depending on the content to which the note, caution, or warning applies) to the HDMI pixel data bit depth �������������� 8, 10, or 12 bits per channel; 165 MHz pixel clock nested note, caution, or warning table. Also apply the Specs8_Note cell insets Display Port pixel data bit depth ����� 8, 10, or 12 bits per channel; 270 MHz pixel clock cell style to the cell containing the note, caution, or warning nested table. Colors �������������������������������������������� 1 billion, (10 bit processing) zz Apply the Specs8_Note or Specs8_Warning/Caution paragraph style to the text within the nested note, caution, or warning table. Video output Number/signal type ������������������������ 2 HDMI (HDCP compliant) zz Apply the Specs8_note cell inset cell style to the specs table cell containing the 1 DTP (HDCP compliant) nested table. Connectors ������������������������������������ 2 female HDMI 1 female RJ-45 connector Digital bit depth ����������������������������� 8 or 10 bit, automatic For use with user guides (manuals) only (but NOT for stand-alone specs sheets), two bulleted note styles are available to use when you combine a series of notes into one note table: Vertical frequency ��������������������������� 23.98 Hz, 24 Hz, 25 Hz, 29.97 Hz, 30 Hz, 50 Hz, 59.94 Hz, 60 Hz Scaled resolution ���������������������������� 640x4808, 800x6008, 1024x7688, 1280x7688, 1280x8008, zz Specs8_Note_bulleted — This is for the first paragaph, and you have to 1280x10248, 1360x7688, 1366x7688, 1440x9008, 1400x10508, 1600x9008,, manually insert the bullet character and second tab. 1600x12008, 1680x10508, 1920x12008 zz Specs8_Note_bulleted, cont'd — This is for susequent paragaphs within a HDTV: 480p7,8, 576p6, 720p3,4,5,6,7,8, 1080i6,7,8, 1080p1,2,3,4,5,6,7,8, 2048x10801,2,3,4,5,6,7,8 note box. The bullet character is automatically inserted. 1 = 23.98 Hz, 2 = 24 Hz, 3 = 25 Hz, 4 = 29.97 Hz, 5 = 30 Hz, 6 = 50 Hz, 7 = 59.94 Hz, 8 = 60 Hz Here is an example of how those two styles are used:

NOTES: • This is just test text to show the style. You wouldn't normally put completely unrelated topics together in a shared note. All nominal levels are at ±10%. UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke Extron Annotator 300 Annotation Processor • Specifications 1 release, excluding the power supply; meets UL 60950 for safety. UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60950 for safety. • Specifications are subject to change without notice. UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60950 for safety. • The 5-pole port supports both hardware and software flow control. The 3-pole ports support software flow control.

Communication —signalprocessor Sync Audio output Audio input Interconnection betweenAnnotator300andDTP/HDBTreceiver Connectors Program control Connectors Web server Ethernet defaultsettings Ethernet protocolEthernet datarate Ethernet controlEthernet port USB standards USB control port Contact closure pinconfigurations Contact closure Serial control pinconfiguration Baud rateandprotocol Serial control port Input impedance Input level Input standards Input type Number/signal type Number/signal type Cable recommendations Cable requirements Signal transmissiondistance Termination standard NOTE: 1080p @60Hz on XTPDTP24shieldedtwistedpaircableisstrongly recommended foroptimalperformance

Extr �������������������������������������� ��������������������������������������

�������������������������������������

������������������������������������ ������������������������������������

��������������������������������

������������������������������ ������������������������������

����������������������������� �����������������������������

����������������������������

��������������������������� ���������������������������

��������������������������

������������������������ ������������������������ ������������������������ ������������������������

���������������������� ����������������������

�������������������

�����������������

����������������

�������

� ear panel3 ectional RS-232,3-pincaptivescrew connector , RGBS,RGsB,RGBcvS,bi-levelortri-levelcomponentvideo on control/configuration program forWindows , ICMP(ping),IP, TCP, UDP, DHCP, HTTP, SMTP, Telnet 1 embeddeddigitalaudiofrom DisplayPort 40 MBnonvolatileusermemory or HDBaseT(embeddeddigital) 1 DTP330(embeddeddigitalandremote balanced/unbalancedanalog) Vertical: 510ohms 1 RJ-45 1 femaleDisplayPort DHCP =off 10/100Base-T 1 RJ-45femaleconnector USB 2 1 femaleminiUSBonfr Pin 1=input1,22,3 1 r 1 9600, 8databits,1stopbit,noparity(default) 1 bidir Horizontal: 75ohms 0 0 2 NTSC 3 RGBHV 2 femaleHDMI 2 embeddeddigitalaudioonHDMI 1 femaleHDMI 1 embeddeddigitalaudiofr 400 MHzbandwidth,STP(shieldedtwistedpair) Solid conductor Up to330'(100m)usingshieldedtwistedpaircableorXTPDTP24STP TIA/EIA T568B Extr Up to200simultaneoussessions Gateway =0 Subnet mask=255 IP address =192 Link speedandduplexlevel=autodetected ARP Extron SimpleInstructionSet(SIS . . . = Tx, 75 3 Vp-pforcomponentvideobi-levelsyncorRGsB 6 Vp-pforcomponentvideotri-levelsync

V to5 . 0, highspeed

. 2 =Rx, 58, NTSC4 Extron Annotator300 Annotation Processor •Specifications . 0 Vp-pforRGBHVorRGBS . , half/fullduplexwithautodetect 0 .

5 mmcaptivescrew connector, 3pole .

3 =Gnd , 24AWG orbetter 0 . . 168 0

. . 43, PAL, SECAM 255

. 254 ont panel . 0 . . 254 0 om HDMI

™ )

®

2

General Communication —annotation (RS-232/IR overDTP) device(pass-through,Communications —external unidirectional orbidirectional) Cooling Power consumption Serial control pinconfiguration Warranty Regulatory compliance Vibration DIM weight Shipping weight Product weight Enclosure dimensions Enclosure type Mounting Thermal dissipation Temperature/humidity Auxiliary poweroutput Power supply USB datarates USB standards Connectors Number/signal type IR control pinconfiguration IR pass-through control ports Protocol Baud rates Serial control pass-through ports NOTE: NOTE: NOTE: Environmental EMI/EMC Safety Furniture mount Rack mount DTP output USB Annotator 300output/DTPRx Annotator 300output/DTPRx

������������������������������������������

����������������������������������������� �����������������������������������������

���������������������������������������� ����������������������������������������

Protocol ismirrored betweentheconnectedDTP330endpointand“OverDTP”portonAnnotator300 Specifications are subjecttochangewithout notice All nominallevelsare at±10% IR insertionfrom anyAnnotator300 The “OverDTP”portissimplyapass-through connectiontoaDTPendpoint signal, andsenttoindividualDTP330Rxendpointforcontrol ofaremote sinkdevice Signals from acontrol devicepassintotheAnnotator 300“OverDTP”port,isembeddedwiththeDTP �������������������������������������� ��������������������������������������

������������������������������������ ������������������������������������

����������������������������������

���������������������������������

�������������������������������� �������������������������������� ��������������������������������

�������������������������������

������������������������������

����������������������������� �����������������������������

��������������������������

������������������������ ������������������������

�����������������������

����������������������

���������������������

��������������������

������������

���������

�������

�� ��

Operating: +32to+122°F(0+50°C)/10%90%,noncondensing Input: 100-240VAC, 50-60Hz even oroddparity no parity(default) 1 or2stopbits 1 Metal Yes, withoptional under-desk or through-desk mountingkit Yes, withpre-installed brackets 81 Fan, airflowsfrom rightto left(asviewedfr Storage: -40to+158°F(-40+70°C)/10%90%,noncondensing Supports oneendpoint(oneDTPRx) 5 VDC,500mAoneachUSBconnector 37 watts Internal Low speed(1 USB 2 3 USBtypeAconnectors(2onrear and1onfr 32 USBdevices(viahubs) 3 =Gnd4IRTx,5Rx (1) 3 TTL level(0to5V)modulatedinfrared contr 1 =Tx,2Rx,3Gnd 8 or7databits 300 to38400 RS-232 via(1)3 3 yearspartsandlabor Complies withtheappropriate r CE, C-tick,FCCClassA,ICES,VCCI CE, c-UL,UL ISTA SafeTransit 1Aincarton(International Association) 8 lbs(4kg) 7 lbs(4kg) 5 (Depth excludesconnectorsandknobs (4 . . 75" Hx17 4 lbs(2 . 4 cmHx44 . 4 BTU/hr . . 5 mmcaptivescr . 0, USB1

Extron Annotator300 Annotation Processor •Specifications .

4 kg) control porttothe“OverDTP” . . 5" Wx9 5 Mbps),fullspeed(12Mbps) .

. 5 cmWx . 1, USB1 5 mm,polecaptivescr ew connector, 5pole(shared withRS-232port) . 5" D . .

0 compatible 24 .

1 cmD) (1Uhigh,fullrackwide) . equirements ofRoHS,WEEE

. ) ew connector(shared withIRport) om thefront panel) ol from 30kHzupto60 . ont) . There isnoRS-232or

.

. 8 �0-040

914-D4 .

3