Beginning Silversmithing Class All stones, silver, supplies and tools furnished. You do not need to bring anything to the class. You will learn all the basics of Silversmithing and jewelry making.

You will learn how to solder Sterling Silver with all hard solder, for quicker, easier, and more finished looking jewelry. You will design a ring, make a bezel, solder the ring together including a 3 wire ring band. You may choose to design a pendant if you wish. Thursday and Friday Class, February 23th and 24th Saturday and Sunday Class, February 25th and 26th

at White Fox Bead Studio

145 Cherokee Heights Drive, Maryville, TN 37801, (865) 980-0237

Times: 9:00 AM to 6:00 PM each day.

Cost: $300.00 Class is limited to 6 students.

Taught by Don Norris, Professional silversmith and teacher for over 35 years. Register now: 1-303-517-1068 to talk to Don Norris

E-Mail [email protected] Visit: LearnSilver.com Each student will receive a FREE copy of the Beginning Silversmithing Class on CD!

Over 500 of these have been sold over the internet and it has been compared to 3 years of jewelry making school!

You may pay the deposit of $150.00 by Credit Card, Paypal or Check

Call Don Norris at 303-517-1068 to arrange for credit card or Paypal payment OR

Mail checks payable to Don Norris to

Don Norris, PO Box 2433, Estes Park, CO 80517 Silversmithing Class! You will learn all the basics of Silversmithing and jewelry making. This class will be taught from the following view points:

1. It will be taught as a metals class not an art class. 2. All the basics of metal smithing for the creation of jewelry will be taught with Mr. Norris’ unique techniques he has learned over the past 30 years of studying and teaching Silversmithing. 3. Soldering: You will taught to use nothing but hard solder for all solder joints on new construction. It is easier, faster, and makes better jewelry! For more information E-Mail [email protected] and you will be sent sever web sites that will convince you to throw away your easy and medium solder! Learning how to be an expert with a torch is the secret and it is not that difficult! 4. That everyone in the class will want to do Silversmithing to make a living. An emphasis will be placed on designing, making and selling jewelry for a profit. If you wish to do Silversmithing as a hobby, that is fine, but after taking this class you will be able to make nearly any type of silver jewelry and it will be good enough to sell. How to sell your jewelry will be discussed and taught! 5. Below are some other unique, even controversial, techniques and concepts that will be taught. ★ You will be taught to spray on your flux and use it as a temperature gauge for soldering ★ You will be taught what flux does, and that flux does not “clean” the silver. ★ You will be taught that you cannot use too much flux ★ You will be taught to use nothing but strip (sheet) solder in large snippets, not those silly little, tinie, tiny snippets, and for sure not to use wire and paste solders! ★ You will be taught how solder works on a physics level so that you fully understand why and how to solder correctly. ★ You will be taught to use a $10.00 torch from Ace Hardware. It will make you thousands of dollars worth of jewelry so that you can purchase more important tools and equipment. The best torch for Silversmithing will also, of course, be shown and discussed. ★ You will be taught that if you are doing repairs, YOU ARE LOSING MONEY! ★ You will be taught that every time you pick up a jeweler’s saw, YOU ARE LOSING MONEY! ★ You will be taught never to use rouges. ★ You will be taught to never worry about “fire coat” or “fire scale” and why. ★ You will be taught a way to make a bezel that will forever change the way that you make them. FAST AND PERFECT!!!! ★ You will be taught why you should never use anything but serrated bezel. ★ You will be taught why you will never want to use a “jeweler’s bench”. ★ You will be taught that you only need two files to do all your filing on sterling silver. ★ You will be taught the difference between working with silver and gold. ★ You will be taught that if you are a beginner you should not even work in gold and why, if you do, you will lose money! ★ You will be taught many unusual ways to sell your jewelry, and for a good profit.

This is not a “project class”, you will only make one “Southwestern” or “American Indian” styled ring. By making it you will learn all the basics to make just about anything! “If you are a beginner, I will teach you everything you need to know to become a successful, profitable Silversmith! If you are an experienced silversmith, I will teach you to work quicker, make better jewelry and make more PROFIT!”, Don Norris