MODEL W1854 18" 1.5 HP OPENEND DRUM SANDER W/VARIABLESPEED FEED Product Dimensions Weight...... 198 lbs. Width (side‐to‐side) x Depth (front‐to‐back) x Height...... 35‐1/2 x 22‐1/2 x 50 in. Footprint (Length x Width)...... 41‐1/2 x 22‐1/2 in.
Shipping Dimensions Type...... Cardboard Box w/Wood Skids Content...... Machine Weight...... 235 lbs. Length x Width x Height...... 25 x 33 x 33 in. Must Ship Upright...... Yes
Electrical Power Requirement...... 120V, Single‐Phase, 60 Hz Full‐Load Current Rating...... 13.92A Minimum Circuit Size...... 20A Connection Type...... Cord & Plug Power Cord Included...... Yes Power Cord Length...... 6 ft. Power Cord Gauge...... 14 AWG Plug Included...... Yes Included Plug Type...... 5‐15 Switch Type...... Paddle Safety Switch w/Removable Key
Motors Conveyor Belt Horsepower...... 1/8 HP Amps...... 0.92A Speed...... 1800 RPM Type...... Universal DC Power Transfer ...... Direct Drive
Main Horsepower...... 1.5 HP Phase...... Single‐Phase Amps...... 13A Speed...... 3450 RPM Type...... ODP Capacitor‐Start Induction Power Transfer ...... V‐Belt Drive Bearings...... Shielded & Permanently Lubricated
Model W1854 Machine Specifications, Page 1 of 2 Main Specifications Operation Information Number of Sanding Heads...... 1 Maximum Board Width...... 36 in. Minimum Board Width...... 1 in. Maximum Board Thickness...... 4‐1/2 in. Minimum Board Thickness...... 1/8 in. Minimum Board Length...... 6 in. Sandpaper Speed...... 2600, 3400 FPM Conveyor Feed Rate...... 0 ‐ 12 FPM Sandpaper Length...... 89 in. Sandpaper Width...... 3 in.
Drum Information Infeed Sanding Drum Type...... Aluminum Infeed Sanding Drum Size...... 4 in.
Construction Conveyor Belt...... Sandpaper Body...... Steel Base...... Steel Paint Type/Finish...... Powder Coated
Other Related Information Floor To Table Height...... 35 ‐ 40 in. Sanding Belt Tension...... Spring‐Loaded Conveyor Belt Length...... 45 in. Conveyor Belt Width...... 18 in. Belt Roller Size...... 1‐3/8 in. Number of Dust Ports...... 1 Dust Port Size...... 4 in.
Other Country of Origin ...... China Warranty ...... 2 Years Approximate Assembly & Setup Time ...... 1‐1/2 Hours Serial Number Location ...... ID Label Certified by a Nationally Recognized Testing Laboratory (NRTL) ...... Yes
Features Open‐Ended Design Accommodates Workpieces up to 36" Wide Spring‐Loaded Sanding Belt Tension Sandpaper Conveyor Belt 4" Dust Port Electronic Variable‐Speed Conveyor Motor 4" Aluminum Sanding Drum Durable Powder‐Coated Finish Stationary Drum Headstock Paddle Switch with Removable Key Easy Access for Sandpaper Changes
Model W1854 Machine Specifications, Page 2 of 2