CHAINSAW GUIDE BAR CATALOGUE

STRENGTH CONTENTS

INTRODUCTION 01 GUIDE BARS PRODUCT NUMBER GUIDE 02 SUGIHARA GUIDE BARS COME IN 3 TYPES 04 FIND YOUR CHAINSAW MODEL – GROUPS 1 – 5 05 GROUP 1 STIHL 06 GROUP 2 STIHL 08 GROUP 3 STIHL 09 GROUP 4 STIHL 13 GROUP 5 STIHL 16 FIND YOUR HUSQVARNA CHAINSAW MODEL – GROUPS 1 – 5 18 GROUP 1 HUSQVARNA 19 GROUP 3 HUSQVARNA 21 GROUP 4 HUSQVARNA 28 GROUP 5 HUSQVARNA 31 FIND YOUR ECHO CHAINSAW MODEL – GROUPS 0 – 4 33 GROUP 0 ECHO 34 GROUP 1 ECHO 34 GROUP 3 ECHO 37 GROUP 4 ECHO 38 FIND YOUR CHAINSAW MODEL – GROUPS 1 – 5 40 GROUP 1 DOLMAR 41 GROUP 3 DOLMAR 43 GROUP 4 DOLMAR 49 GROUP 5 DOLMAR 53 FIND YOUR MULTI MOUNT CHAINSAW MODEL 54 GROUP 1 STIHL, HUSQVARANA, ECHO & DOLMAR 54 FIND YOUR MULTI MOUNT CHAINSAW MODEL 57 GROUP 4 STIHL, HUSQVARANA, ECHO & DOLMAR 57 FIND YOUR CHAINSAW MODEL – CARVING BARS 60 GROUP 0 STIHL 60 GROUP 1 & 2 STIHL, GROUP 1 HUSQVARNA, ECHO & DOLMAR 61 GROUP 3 STIHL 64 GROUP 3 HUSQVARNA & DOLMAR 65 GROUP 4 ECHO 66 INTRODUCTION 1

Sugihara chainsaw guide bars for the professional market Sugihara have manufactured chainsaw guide bars in Japan since 1957. The factory was started by Hideo Sugihara and has been run by the Sugihara family ever since with knowledge passed from father to son. There are even several generations of workers whose fathers and grandfathers started working for the Sugihara family under Hideo Sugihara. These guide bars have always been produced in the same factory by the same people. Steel has different properties depending on how it is heated then cooled. Sugihara chainsaw guide bars go through the process of heating and cooling up to 4 times on different parts of the bar for maximum performance. The rails are accurately cut and then hardened as much as possible without becoming brittle. The bar body needs to be less hard but still needs to be stiff enough for good control whilst maintaining flexibility. We have used and sold lots of different chainsaw bars over the years including all the major manufacturers. Sugihara chainsaw guide bars are the hardest wearing on the market. Even their laminated bars will outlast big name rivals.

Sugihara chainsaw guide bars durability and strength Sugihara rails measure on a hardness scale HRC 60. Compare this to Stihl at HRC 57 and Oregon at HRC 55. Sugihara chainsaw guide bars are so hard they resist most flat files when it comes to bar dressing. They also come in a huge range from the smallest 8″ dime tip carving bar up to a 46″ Pro Solid bar. If you are serious about your tree cutting equipment and you want the best guidebar on the market, then fit a Sugihara bar. GUIDE BARS PRODUCT NUMBER GUIDE 2

S L 2 A – 0 B 4 0 – A 1 2

1 BAR MOUNT

LONGITUDINAL SLOT

ADJUSTMENT OIL HOLE HOLE

2 TYPE & STYLE – STANDARD OR LIGHT WEIGHT

A Solid hard nose Standard C Solid hard nose Light type T Replaceable sprocket nose Standard U Replaceable sprocket nose Light type L Laminated sprocket nose Standard M Laminated sprocket nose Light weight

3 GROOVE GAUGE 4 = .043G 0 = .050G 8 = .058G 3 = .063G GUIDE BARS PRODUCT NUMBER GUIDE 3

S L 2 A – 0 B 4 0 – A 3 4 5 6

4 TIP TYPE & STYLE NOSE RADIUS NOSE RADIUS P Hard Nose R7 I Sprocket LP1/4"P 10T X Hard nose R9 - R9.5 V Sprocket 1/4"P 10T Z Hard nose R10 - R11.5 F Sprocket 1/4"P 12T Y Hard nose R12 - R14.5 O Sprocket 1/4"P 12T small R Hard nose R15 - R17.5 G Sprocket 1/4"P 13T T Hard nose R18 - R18.5 H Sprocket .325"P 10T A Hard nose R19 - R21 J Sprocket .325"P 11T B Hard nose R21.5 - R26 W Sprocket LP3/8"P 7T C Hard nose R26.5 - R30 N Sprocket LP3/8"P 8T D Hard nose R30.5 - R35 L Sprocket LP3/8"P 9T E Hard nose Over R35 Q Sprocket 3/8"P 11T I Sprocket 1/4"P 8T S Sprocket .404"P 10T

5 LENGTH

6 BRAND LOGO, LASER MARKING

A = SUGIHARA SUGIHARA CHAINSAW GUIDE BARS COME IN 3 TYPES 4

Sugihara Pro Laminated guide bars These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. They have a sandwich construction with two pieces of steel welded together and the internal space filled with a punched blank. Sugihara Pro Laminated guide bars are more economical and lighter in weight but are still the stiffest and longest lasting laminated bars on the market.

Sugihara Light Type Pro guide bars Manufactured the same way as the Red Label Pro Solid bars but with sections removed and filled with white resin. This retains most of the characteristics of the solid bar whilst making the bar lighter. Sugihara Light Type Pro chainsaw guide bars are sought after for their high performance and light weight. They are easily recognised by the white resin sections and Black Label. The most striking looking bar on the market.

Sugihara Pro Solid guide bars Formed and cut from a single piece of steel. They have the best durability and stiffness characteristics with a polished lacquered finish. Ultimate durability and performance mean this is the benchmark bar. These bars carry a Red Label. FIND YOUR STIHL CHAINSAW MODEL – GROUPS 1 – 5 5

GROUP 1 – PG 06 GROUP 3 – PG 09 Ground chainsaw model Chainsaw model 009, 010, 011, 012, 017, MS170, MS171 024, MS240, 026, MS260, 018, MS180, MS181, 019, MS190, MS191 MS261 027, MS270, MS271, MS192, MS193, 020, MS200, MS201 028, MS280, MS281 021, 022, MS210, MS211 Stihl Group 3 chainsaw share the same mount Top handled chainsaw model as Group 4 but run .325 .063 chain as standard. MS150T 019T, MS190T, MS191T Cannon bar code (starts) S1 MS192T, MS193T Oregon bar code (ends) D025 020T, MS200T, MS201T Stihl bar code (starts) 3003 Sugihara bar code (starts) ST2 Pole chainsaw model HT70, HT75, HT100, HT101, HT130, HT131 GROUP 4 – PG 13 Electric chainsaw model Chainsaw model E140, E160, E180, MSE140, MSE160 029, MS290, MS291, 034, MS340, MS341, MSE180, MSE200 036, MS360, MS361 MS362, 038, MS380, Cannon bar code (starts) C1 MS381, 039, MS390, MS391 041, 044, MS440, Oregon bar code (ends) A074 MS441, 045, MS450, MS451 046, MS460, Stihl bar code (starts) 3005 MS461, 048, 065, MS650, MS651 064, MS640, Sugihara bar code (starts) SL2 MS641, 066, MS660, MS661 Electric model MSE220, E20 GROUP 2 – PG 08 Chainsaw model Stihl Group 4 chainsaws have the same mount 023, MS230, MS231, 025, MS241, MS250, MS251 as Group 3 but run 3/8″ .063 chain as standard.

Stihl Group 2 chainsaws have the same Cannon bar code (starts) S1 mount as Group 1 chainsaws but tend to Oregon bar code (ends) D025 run a .325 .063 chain as standard hence Stihl bar code (starts) 3003 listing them as Group 2. Sugihara bar code (starts) ST2

Cannon bar code (starts) S1 Oregon bar code (ends) A074 GROUP 5 – PG 16 Stihl bar code (starts) 3005 Chainsaw model Sugihara bar code (starts) SL2 050, 051, 070, 075, 076, 08, 084, 090 088, MS880

Stihl Group 5 chainsaws tend to run .404 chain as standard.

Cannon bar code (starts) S2 Oregon bar code (ends) E031 Stihl bar code (starts) 3002 Sugihara bar code (starts) SG6 GROUP 1 STIHL 12 – 14″ GUIDE BARS 6

Ground chainsaw model Pole chainsaw model 009, 010, 011, 012, HT70, HT75, HT100, HT101, HT130, HT131 017, MS170, MS171, 018, MS180, MS181, Electric chainsaw model 019, MS190, MS191, MS192, E140, E160, E180 MS193 020, MS200, MS201, MSE140, MSE160, MSE180, MSE200 021, 022, MS210, MS211 Cannon bar code (starts) C1 Oregon bar code (ends) A074 Top handled chainsaw model Stihl bar code (starts) 3005 MS150T Sugihara bar code (starts) SL2 019T, MS190T, MS191T MS192T, MS193T 020T, MS200T, MS201T

£49.00 Ex VAT £25.00 Ex VAT £58.80 Inc VAT £30.00 Inc VAT

Sugihara 12″ Light Type Pro Sugihara 12″ Pro Laminated

3/8″ Lo Pro .043 – 45 drive links 1/4″ .050 – 64 drive links Sugihara single piece steel professional sprocket nose bar These bars are similar to Oregon Pro Lite and Pro Am and Stihl with sections removed and replaced with a rigid light weight Rollamatic chainsaw bars. A sandwich construction with two resin. One of the best guide bars in the world today Sugihara pieces of steel welded together and the internal space filled with Light Type bars are the most popular version amongst tree a punched blank. 1/4″ pitch chain cuts a narrower kerf with more professionals. This bar has a smaller nose radius for reduced cutting teeth giving a clean, fast and smooth cut. Remember to buy kickback and is a favourite amoungst arborists for use on top a 1/4″ pitch drive sprocket. handled saws. Part Number SL2M-0F30-A Weight 440g Part Number SL2U-0N30-A Weight 390g

£25.00 Ex VAT £47.00 Ex VAT £30.00 Inc VAT £56.40 Inc VAT

A Sugihara 12″ Pro Laminated Sugihara 12″ Pro Laminated (with chain included)

1/4″ .043 – 68 drive links 3/8″ Lo Pro .050 – 44 drive links Sugihara laminated guide bar with sandwich style construction to Super thin laminated bar with sandwich construction that runs give a durable guide bar at an excellent price. These bars work Sugihara’s own 1/4 .043 chain. Fast clean cutting and the best choice well on top handled saws in the tree as well as smaller Stihl saws for a pole saw or smaller chainsaw. Sugihara 1/4 .043 bars will not on the ground. Runs 3/8 Lo Pro .050 chain as standard which run the Stihl version of this chain (nor vice versa). Universal mount gives plenty of options in terms of chain you run. means that this bar will work with most chainsaws under 40cc. Part Number SL2M-0N30-A Weight 415g Part Number BN6M-4V30-A Weight 320g GROUP 1 STIHL 14 – 18″ GUIDE BARS 7

£54.00 Ex VAT £27.00 Ex VAT £64.80 Inc VAT £32.40 Inc VAT

Sugihara 14″ Light Type Pro Sugihara 14″ Pro Laminated

3/8″ Lo Pro .050 – 50 drive links 1/4″ .050 – 72 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. One Rollamatic chainsaw bars. A sandwich construction with two of the best guide bars in the world today Sugihara Light Type bars pieces of steel welded together and the internal space filled are the most popular version amongst tree professionals. This bar with a punched blank. 1/4″ pitch chain cuts a narrower kerf has a smaller nose radius for reduced kickback and is a favourite with more cutting teeth giving a clean, fast and smooth cut. amoungst arborists for use on top handled saws. Remember to buy a 1/4″ pitch drive sprocket.

Part Number SL2U-0N35-A Weight 475g Part Number SL2M-0F35-A Weight 475g

£49.00 Ex VAT £58.00 Ex VAT £58.80 Inc VAT £69.60 Inc VAT

Sugihara 14″ Pro Lam (with chain included) Sugihara 16″ Light Type Pro

Chain spec 1/4″ .043 – 76 drive links 3/8″ Lo Pro .050 – 55 drive links Super thin laminated bar with sandwich construction that runs Sugihara single piece steel professional sprocket nose bar with Sugihara’s own 1/4 .043 chain. Fast clean cutting and the sections removed and replaced with a rigid light weight resin. One best choice for a pole saw or smaller chainsaw. Sugihara 1/4 of the best guide bars in the world today Sugihara Light Type bars .043 bars will not run the Stihl version of this chain (nor vice are the most popular version amongst tree professionals. This bar versa). Universal mount means that this bar will work with most has a smaller nose radius for reduced kickback and can be used on chainsaws under 40cc. top handled and ground saws. Part Number BN6M-4V35-A Weight 400g Part Number BN6U-0N40-A Weight 515g

£30.00 Ex VAT £32.00 Ex VAT £36.00 Inc VAT £38.40 Inc VAT

Sugihara 16″ Pro Laminated Sugihara 18″ Pro Laminated

1/4″ .050 – 80 drive links 1/4″ .050 – 88 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. A sandwich construction with two Rollamatic chainsaw bars. A sandwich construction with two pieces of steel welded together and the internal space filled with pieces of steel welded together and the internal space filled with a punched blank. 1/4″ pitch chain cuts a narrower kerf with more a punched blank. 1/4″ pitch chain cuts a narrower kerf with more cutting teeth giving a clean, fast and smooth cut. Remember to cutting teeth giving a clean, fast and smooth cut. Remember to buy buy a 1/4″ pitch drive sprocket. a 1/4″ pitch drive sprocket. Part Number SL2M-0F40-A Weight 550g Part Number SL2M-0F45-A Weight 645g GROUP 2 STIHL 14 – 18″ GUIDE BARS 8

Chainsaw model £27.00 Ex VAT £32.40 Inc VAT 023, MS230, MS231, 025, MS241, MS250, MS251

Stihl Group 2 chainsaws have the same mount as Group 1 chainsaws but tend to run a .325 .063 chain as standard hence listing them as Group 2. Sugihara 14″ Pro Laminated 325 .063 – 56 drive links Cannon bar code (starts) S1 These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. A sandwich construction with two Oregon bar code (ends) A074 pieces of steel welded together and the internal space filled with Stihl bar code (starts) 3005 a punched blank. Sugihara bar code (starts) SL2 Part Number SL2M-3J35-A Weight 605g

£30.00 Ex VAT £32.00 Ex VAT £36.00 Inc VAT £38.40 Inc VAT

Sugihara 16″ Pro Laminated Sugihara 18″ Pro Laminated

.325 .063 – 62 drive links 325 .063 – 68 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. A sandwich construction with two Rollamatic chainsaw bars. A sandwich construction with two pieces of steel welded together and the internal space filled pieces of steel welded together and the internal space filled with with a punched blank. a punched blank. Part Number SL2M-3J40-A Weight 655g Part Number SL2M-3J44-A Weight 755g GROUP 3 STIHL 13 – 15″ GUIDE BARS 9

Chainsaw model £26.00 Ex VAT £31.20 Inc VAT 024, MS240 026, MS260, MS261 027, MS270, MS271 028, MS280, MS281

Stihl Group 3 chainsaw share the same mount as Sugihara 13″ Pro Laminated Group 4 but run .325 .063 chain as standard. .325 .050 – 56 drive links Sugihara laminated guide bar, combining light weight with high performance. One of the best laminated bars on the market and will Cannon bar code (starts) S1 usually outlast all other rivals. These bars have been designed to run Oregon bar code (ends) D025 Oregon 95TXL chain. The reason is that this chain cuts a narrower Stihl bar code (starts) 3003 kerf, similar to a 3/8″ Lo Pro chain. However, this chain is still on a .325 chassis so it is not necessary to change the drive sprocket. Sugihara bar code (starts) ST2 Part Number ST2M-0J32P-A Weight 525g

£26.00 Ex VAT £29.00 Ex VAT £31.20 Inc VAT £34.80 Inc VAT

Sugihara 13″ Pro Laminated Sugihara 14″ Pro Laminated

.325 .063 – 56 drive links 3/8 Lo Pro .050 – 56 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. A sandwich construction with two Rollamatic chainsaw bars. A sandwich construction with two pieces pieces of steel welded together and the internal space filled with of steel welded together and the internal space filled with a punched a punched blank. blank. These bars run 3/8″ Lo Pro .050 chain and enable you to Part Number ST2M-3J32-A Weight 635g cut faster on all Group 3 chainsaws. We recommend fitting Stihl full chisel 3/8″ Lo Pro chain 3616 or 3617. Part Number ST2M-0L36-A Weight 585g

£60.00 Ex VAT £60.00 Ex VAT £72.00 Inc VAT £72.00 Inc VAT

Sugihara 15″ Light Type Pro Sugihara 15″ Light Type Pro .325 .063 – 62 drive links .325 .050 – 63 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. One sections removed and replaced with a rigid light weight resin. One of the best guide bars in the world today Sugihara Light Type bars of the best guide bars in the world today Sugihara Light Type bars are the most popular version amongst tree professionals. are the most popular version amongst tree professionals. These bars have been designed to run Oregon 95TXL chain. This chain Part Number ST2U-3J37-A Weight 715g cuts a narrower kerf, similar to a 3/8″ Lo Pro chain, but is still on a .325 chassis so it is not necessary to change the drive sprocket. Part Number ST2U-0J37-A Weight 670g GROUP 3 STIHL 15 – 16″ GUIDE BARS 10

£29.00 Ex VAT £29.00 Ex VAT £34.80 Inc VAT £34.80 Inc VAT

Sugihara 15″ Pro Laminated Sugihara 15″ Pro Laminated

.325 .050 – 62 drive links .325 .063 – 62 drive links Sugihara laminated guide bar, combining light weight with high These bars are similar to Oregon Pro Lite and Pro Am and Stihl performance. One of the best laminated bars on the market and will Rollamatic chainsaw bars. A sandwich construction with two usually outlast all other rivals. These bars have been designed to run pieces of steel welded together and the internal space filled with Oregon 95TXL chain. The reason is that this chain cuts a narrower a punched blank. kerf, similar to a 3/8″ Lo Pro chain. However, this chain is still on a Part Number ST2M-3J37-A Weight 690g .325 chassis so it is not necessary to change the drive sprocket. Part Number ST2M-0J37P-A Weight 580g

£56.00 Ex VAT £63.00 Ex VAT £67.20 Inc VAT £75.60 Inc VAT

Sugihara 15″ Pro Solid – .325 .063 Sugihara 16″ Light Type Pro

.325 .063 – 62 drive links .325 .063 – 67 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar long lasting performance in all conditions. Sprocket nose is with sections removed and replaced with a rigid light weight replaceable. Superb durability, stiffness and wear characteristics resin. One of the best guide bars in the world today Sugihara this is the benchmark Sugihara bar. Light Type bars are the most popular version amongst tree professionals. Part Number ST2T-3J37-A Weight 835g Part Number ST2U-3J40-A Weight 790g

£30.00 Ex VAT £30.00 Ex VAT £36.00 Inc VAT £36.00 Inc VAT

Sugihara 16″ Pro Laminated Sugihara 16″ Pro Laminated

.325 .050 – 67 drive links .325 .063 – 67 drive links Sugihara laminated guide bar, combining light weight with These bars are similar to Oregon Pro Lite and Pro Am and Stihl high performance. One of the best laminated bars on the Rollamatic chainsaw bars. A sandwich construction with two market and will usually outlast all other rivals. These bars pieces of steel welded together and the internal space filled have been designed to run Oregon 95TXL chain. The reason with a punched blank. is that this chain cuts a narrower kerf, similar to a 3/8″ Lo Pro Part Number ST2M-3J40-A Weight 765g chain. However, this chain is still on a .325 chassis so it is not necessary to change the drive sprocket. Part Number ST2M-0J40P-A Weight 645g GROUP 3 STIHL 16 – 18″ GUIDE BARS 11

£30.00 Ex VAT £58.00 Ex VAT £36.00 Inc VAT £69.60 Inc VAT

Sugihara 16″ Pro Laminated Sugihara 16″ Pro Solid

3/8 Lo Pro .050 – 60 drive links .325 .063 – 67 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar for long Rollamatic chainsaw bars. A sandwich construction with two lasting performance in all conditions. Sprocket nose is replaceable. pieces of steel welded together and the internal space filled with a Superb durability, stiffness and wear characteristics this is the punched blank. These bars run 3/8″ Lo Pro .050 chain and enable benchmark Sugihara bar. you to cut faster on all Group 3 chainsaws. We recommend fitting Part Number ST2T-3J40-A Weight 920g Stihl full chisel 3/8″ Lo Pro chain 3616 or 3617. Part Number ST2M-0L40-A Weight 640g

£66.00 Ex VAT £66.00 Ex VAT £79.20 Inc VAT £79.20 Inc VAT

Sugihara 18″ Light Type Pro Sugihara 18″ Light Type Pro

Chain spec .325 .050 – 74 drive links Chain spec .325 .063 – 74 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. One sections removed and replaced with a rigid light weight resin. of the best guide bars in the world today Sugihara Light Type bars One of the best guide bars in the world today Sugihara Light Type are the most popular version amongst tree professionals. These bars are the most popular version amongst tree professionals. bars have been designed to run Oregon 95TXL chain. This chain Part Number ST2U-3J45-A Weight 890g cuts a narrower kerf, similar to a 3/8″ Lo Pro chain, but is still on a .325 chassis so it is not necessary to change the drive sprocket. Part Number ST2U-0J45-A Weight 830g

£32.00 Ex VAT £32.00 Ex VAT £38.40 Inc VAT £38.40 Inc VAT

Sugihara 18″ Pro Laminated Sugihara 18″ Pro Laminated

.325 .050 – 74 drive links .325 .063 – 74 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. A sandwich construction with two Rollamatic chainsaw bars. A sandwich construction with two pieces of steel welded together and the internal space filled pieces of steel welded together and the internal space filled with with a punched blank. These bars have been designed to run a punched blank. Oregon 95TXL chain. This chain cuts a narrower kerf, similar Part Number ST2M-3J45-A Weight 910g to a 3/8″ Lo Pro chain, but is still on a .325 chassis so it is not necessary to change the drive sprocket. Part Number ST2M-0J45P-A Weight 735g GROUP 3 STIHL 18 – 20″ GUIDE BARS 12

£32.00 Ex VAT £62.00 Ex VAT £38.40 Inc VAT £74.40 Inc VAT

Sugihara 18″ Pro Laminated Sugihara 18″ Pro Solid

3/8 Lo Pro .050 – 66 drive links .325 .063 – 74 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar for Rollamatic chainsaw bars. A sandwich construction with two long lasting performance in all conditions. Sprocket nose is pieces of steel welded together and the internal space filled with replaceable. Superb durability, stiffness and wear characteristics a punched blank. These bars run 3/8″ Lo Pro .050 chain and this is the benchmark Sugihara bar. enable you to cut faster on all Group 3 chainsaws. We recommend Part Number ST2T-3J45-A Weight 1050g fitting Stihl full chisel 3/8″ Lo Pro chain 3616 or 3617. Part Number ST2M-0L45-A Weight 740g

£36.00 Ex VAT £36.00 Ex VAT £43.20 Inc VAT £43.20 Inc VAT

Sugihara 20″ Pro Laminated Sugihara 20″ Pro Laminated .325 .050 – 81 drive links .325 .063 – 81 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. A sandwich construction with two Rollamatic chainsaw bars. A sandwich construction with two pieces of steel welded together and the internal space filled pieces of steel welded together and the internal space filled with with a punched blank. These bars have been designed to run a punched blank. Oregon 95TXL chain. This chain cuts a narrower kerf, similar Part Number ST2M-3J50-A Weight 1110g to a 3/8″ Lo Pro chain, but is still on a .325 chassis so it is not necessary to change the drive sprocket. Part Number ST2M-0J50P-A Weight 1050g

£36.00 Ex VAT £68.00 Ex VAT £43.20 Inc VAT £81.60 Inc VAT

Sugihara 20″ Pro Laminated Sugihara 20″ Pro Solid

Chain spec 3/8 Lo Pro .050 – 72 drive links Chain spec .325 .063 – 81 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar for Rollamatic chainsaw bars. A sandwich construction with two long lasting performance in all conditions. Sprocket nose is pieces of steel welded together and the internal space filled with a replaceable. Superb durability, stiffness and wear characteristics punched blank. These bars run 3/8″ Lo Pro .050 chain and enable this is the benchmark Sugihara bar. you to cut faster on all Group 3 chainsaws. We recommend fitting Part Number ST2T-3J50-A Weight 1175g Stihl full chisel 3/8″ Lo Pro chain 3616 or 3617. Part Number ST2M-0L50-A Weight 825g GROUP 4 STIHL 15 – 16″ GUIDE BARS 13

Chainsaw model Electric chainsaws model 029, MS290, MS291, MSE220, E20 034, MS340, MS341, 036, MS360, MS361, Stihl Group 4 chainsaws have the same MS362 038, MS380, MS381, mount as Group 3 but run 3/8″ .063 039, MS390, MS391, chain as standard. 041, 044, MS440, MS441 045, MS450, MS451, Cannon bar code (starts) S1 046, MS460, MS461, Oregon bar code (ends) D025 048, 065, MS650, MS651 064, Stihl bar code (starts) 3003 MS640, MS641, Sugihara bar code (starts) ST2 066, MS660, MS661

£60.00 Ex VAT £29.00 Ex VAT £72.00 Inc VAT £34.80 Inc VAT

Sugihara 15″ Light Type Pro Sugihara 15″ Pro Laminated

3/8″ .063 – 56 drive links 3/8″ .063 – 56 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. One Rollamatic chainsaw bars. A sandwich construction with two of the best guide bars in the world today Sugihara Light Type bars pieces of steel welded together and the internal space filled with are the most popular version amongst tree professionals. a punched blank. Part Number ST2U-3Q36-A Weight 800g Part Number ST2M-3Q36-A Weight 790g

£56.00 Ex VAT £63.00 Ex VAT £67.20 Inc VAT £75.60 Inc VAT

Sugihara 15″ Pro Solid Sugihara 16″ Light Type Pro

3/8″ .063 – 56 drive links 3/8″ .063 – 60 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar with long lasting performance in all conditions. Sprocket nose is sections removed and replaced with a rigid light weight resin. One replaceable. Superb durability, stiffness and wear characteristics of the best guide bars in the world today Sugihara Light Type bars this is the benchmark Sugihara bar. are the most popular version amongst tree professionals. Part Number ST2T-3Q36-A Weight 920g Part Number ST2U-3Q40-A Weight 870g GROUP 4 STIHL 16 – 20″ GUIDE BARS 14

£30.00 Ex VAT £58.00 Ex VAT £36.00 Inc VAT £69.60 Inc VAT

Sugihara 16″ Pro Laminated Sugihara 16″ Pro Solid

3/8″ .063 – 60 drive links 3/8″ .063 – 60 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar for Rollamatic chainsaw bars. A sandwich construction with two long lasting performance in all conditions. Sprocket nose is pieces of steel welded together and the internal space filled with replaceable. Superb durability, stiffness and wear characteristics a punched blank. this is the benchmark Sugihara bar. Part Number ST2M-3Q40-A Weight 870g Part Number ST2T-3Q40-A Weight 995g

£66.00 Ex VAT £32.00 Ex VAT £79.20 Inc VAT £38.40 Inc VAT

Sugihara 18″ Light Type Pro Sugihara 18″ Pro Laminated

3/8″ .063 – 66 drive links 3/8″ .063 – 66 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara laminated guide bar, combining light weight with high sections removed and replaced with a rigid light weight resin. performance. One of the best laminated bars on the market and One of the best guide bars in the world today Sugihara Light Type will usually outlast all other rivals. bars are the most popular version amongst tree professionals. Part Number ST2M-3Q45-A Weight 990g Part Number ST2U-3Q45-A Weight 970g

£62.00 Ex VAT £73.00 Ex VAT £74.40 Inc VAT £87.60 Inc VAT

Sugihara 18″ Pro Solid Sugihara 20″ Light Type Pro

3/8″ .063 – 66 drive links 3/8″ .063 – 72 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar with long lasting performance in all conditions. Sprocket nose is sections removed and replaced with a rigid light weight resin. replaceable. Superb durability, stiffness and wear characteristics One of the best guide bars in the world today Sugihara Light Type this is the benchmark Sugihara bar. bars are the most popular version amongst tree professionals. Part Number ST2T-3Q45-A Weight 1155g Part Number ST2U-3Q50-A Weight 1070g GROUP 4 STIHL 20 – 30″ GUIDE BARS 15

£36.00 Ex VAT £68.00 Ex VAT £43.20 Inc VAT £81.60 Inc VAT

Sugihara 20″ Pro Laminated Sugihara 20″ Pro Solid

3/8″ .063 – 72 drive links 3/8″ .063 – 72 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar for Rollamatic chainsaw bars. A sandwich construction with two long lasting performance in all conditions. Sprocket nose is pieces of steel welded together and the internal space filled with replaceable. Superb durability, stiffness and wear characteristics a punched blank. this is the benchmark Sugihara bar. Part Number ST2M-3Q50-A Weight 1130g Part Number ST2T-3Q50-A Weight 1280g

£87.00 Ex VAT £82.00 Ex VAT £104.40 Inc VAT £98.40 Inc VAT

Sugihara 25″ Light Type Pro Sugihara 25″ Pro Solid

3/8″ .063 – 84 drive links 3/8″ .063 – 84 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar for sections removed and replaced with a rigid light weight resin. One long lasting performance in all conditions. Sprocket nose is of the best guide bars in the world today Sugihara Light Type bars replaceable. Superb durability, stiffness and wear characteristics are the most popular version amongst tree professionals. this is the benchmark Sugihara bar. Part Number ST2U-3Q63-A Weight 1390g Part Number ST2T-3Q63-A Weight 1625g

£100.00 Ex VAT £109.00 Ex VAT £120.00 Inc VAT £138.80 Inc VAT

Sugihara 28″ Light Type Pro Sugihara 30″ Light Type Pro

Chain spec 3/8″ .063 – 92 drive links Chain spec 3/8″ .063 – 98 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. One sections removed and replaced with a rigid light weight resin. One of the best guide bars in the world today Sugihara Light Type bars of the best guide bars in the world today Sugihara Light Type bars are the most popular version amongst tree professionals. are the most popular version amongst tree professionals. Part Number ST2U-3Q70-A Weight 1620g Part Number ST2U-3Q76-A Weight 1790g GROUP 4 STIHL 30 – 42 ″ GUIDE BARS 16

£98.00 Ex VAT £131.00 Ex VAT £117.60 Inc VAT £157.20 Inc VAT

Sugihara 30″ Pro Solid Sugihara 36″ Light Type Pro

3/8″ .063 – 98 drive links 3/8″ .063 – 114 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar with long lasting performance in all conditions. Sprocket nose is sections removed and replaced with a rigid light weight resin. One replaceable. Superb durability, stiffness and wear characteristics of the best guide bars in the world today Sugihara Light Type bars this is the benchmark Sugihara bar. are the most popular version amongst tree professionals. Part Number ST2T-3Q76-A Weight 2000g Part Number ST2U-3Q90-A Weight 2000g

£126.00 Ex VAT £146.00 Ex VAT £151.20 Inc VAT £175.20 Inc VAT

Sugihara 36″ Pro Solid Sugihara 42″ Pro Solid

3/8″ .063 – 114 drive links 3/8″ .063 – 132 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar for long long lasting performance in all conditions. Sprocket nose is lasting performance in all conditions. Sprocket nose is replaceable. replaceable. Superb durability, stiffness and wear characteristics Superb durability, stiffness and wear characteristics this is the this is the benchmark Sugihara bar. benchmark Sugihara bar. Part Number ST2T-3Q90-A Weight 2580g Part Number ST2T-3Q104-A Weight 3000g

GROUP 5 STIHL 25 – 42 ″ GUIDE BARS

GROUP 5 Cannon bar code (starts) S2 Oregon bar code (ends) E031 Chainsaw model Stihl bar code (starts) 3002 050, 051, 070, 075, 076, 08, 084, 090 Sugihara bar code (starts) SG6 088, MS880

Stihl Group 5 chainsaws tend to run .404 chain as standard. GROUP 5 STIHL 25 – 42″ GUIDE BARS 17

£98.00 Ex VAT £109.00 Ex VAT £117.60 Inc VAT £130.80 Inc VAT

Sugihara 25″ Pro Solid Sugihara 30″ Light Type Pro

.404 .063 – 80 drive links .404 .063 – 92 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar with long lasting performance in all conditions. Sprocket nose is sections removed and replaced with a rigid light weight resin. One replaceable. Superb durability, stiffness and wear characteristics of the best guide bars in the world today Sugihara Light Type bars this is the benchmark Sugihara bar. are the most popular version amongst tree professionals. Part Number SG6T-3S60-A Weight 1810g Part Number SG6U-3S75-A Weight 1935g

£98.00 Ex VAT £133.00 Ex VAT £117.60 Inc VAT £159.60 Inc VAT

Sugihara 30″ Pro Solid Sugihara 36″ Pro Solid

.404 .063 – 92 drive links .404 .063 – 108 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar for long lasting performance in all conditions. Sprocket nose is long lasting performance in all conditions. Sprocket nose is replaceable. Superb durability, stiffness and wear characteristics replaceable. Superb durability, stiffness and wear characteristics this is the benchmark Sugihara bar. this is the benchmark Sugihara bar. Part Number SG6T-3S75-A Weight 2000g Part Number SG6T-3S94-A Weight 2000g

£153.00 Ex VAT £205.00 Ex VAT £183.60 Inc VAT £246.00 Inc VAT

Sugihara 42″ Pro Solid Sugihara 46″ Pro Solid

.404 .063 – 120 drive links .404 .063 – 132 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar for long lasting performance in all conditions. Sprocket nose is long lasting performance in all conditions. Sprocket nose is replaceable. Superb durability, stiffness and wear characteristics replaceable. Superb durability, stiffness and wear characteristics this is the benchmark Sugihara bar. this is the benchmark Sugihara bar. Part Number SG6T-3S105-A Weight 2000g Part Number SG6T-3S115-A Weight 3000g FIND YOUR HUSQVARNA CHAINSAW MODEL – GROUPS 1 – 5 18

GROUP 1 – PG 19 GROUP 4 – PG 28 Chainsaw model Chainsaw model 16, 33, 34, 35, 36, 37, 38, 41 61, 64, 65, 66, 70, 77, 160, 162 135, 136, 137, 235, 236 163, 180, 181, 185, 260, 263, 266 315, 316, 318, 320, 321, 333 268, 272, 280, 281, 285, 288, 298 334, 335, 336, 338 362XP, 365, 365XP, 371, 372XP, 380, 385XP 335XPT, 338XPT 390XP, 394XP, 395XP, 575XP, 576XP 540XP Husqvarna Group 4 chainsaws have the Oregon A095 same mount as Group 5 but run 3/8″ .058 Cannon N/A chain as standard.

Top handled chainsaw model Oregon ends D009 T540XP, T335XPT, T338XPT, T536Li Cannon H1

Pole chainsaw model 327P4, 327PT5S GROUP 5 – PG 31 Chainsaw model Electric chainsaw model 1100, 2100, 2101, 3120XP 321 EL Husqvarna Group 5 chainsaws have the same mount as Group 4 but tend to run GROUP 3 – PG 21 .404 chain as standard. Chainsaw model 39, 40, 42, 44, 45, 49, 50, 51, 55 Oregon ends D009 57, 133, 134, 142, 154, 234, 235 Cannon H1 238, 240, 242, 246, 254, 257 261, 262, 339, 340, 345XP, 346XP 350, 351, 353, 355, 357, 359 360, 440e, 445e, 450e, 455, 460 550XP, 555XP, 560XP

Husqvarna Group 3 chainsaw tend to run .325 .058 chain as standard, but there are other options in the Sugihara range.

Oregon ends K095 Cannon C1 GROUP 1 HUSQVARNA 12″ GUIDE BARS 19

GROUP 1 Oregon A095 Cannon N/A Chainsaw model 16, 33, 34, 35, 36, 37, 38, 41 Top handled chainsaw model 135, 136, 137, 235, 236 T540XP, T335XPT, T338XPT, T536Li 315, 316, 318, 320, 321, 333 334, 335, 336, 338 Pole chainsaw model 335XPT, 338XPT 327P4, 327PT5S 540XP Electric chainsaw model 321 EL

£49.00 Ex VAT £25.00 Ex VAT £58.80 Inc VAT £30.00 Inc VAT

Sugihara 12″ Light Type Pro Sugihara 12″ Pro Laminated

3/8 Lo Pro .050 – 45 drive links 1/4″ .050 – 68 drive links Sugihara single piece steel professional sprocket nose bar These bars are similar to Oregon Pro Lite and Pro Am and Stihl with sections removed and replaced with a rigid light weight Rollamatic chainsaw bars. A sandwich construction with two resin. One of the best guide bars in the world today Sugihara pieces of steel welded together and the internal space filled with Light Type bars are the most popular version amongst tree a punched blank. 1/4″pitch chain cuts a narrower kerf with more professionals. This bar has a smaller radius nose to reduce cutting teeth giving a clean, fast and smooth cut. Remember to kickback. buy a 1/4″ pitch drive sprocket. Part Number BC2M-0N28-A Weight 395g Part Number BC2M-0F30-A Weight 415g

£25.00 Ex VAT £47.00 Ex VAT £30.00 Inc VAT £56.40 Inc VAT

Sugihara 12″ Pro Laminated Sugihara 12″ Pro Laminated + chain

3/8 Lo Pro .050 – 45 drive links 1/4 .043 – 68 drive links + chain (Universal mount) These bars are similar to Oregon Pro Lite and Pro Am and Stihl Super thin laminated bar with sandwich construction that runs Rollamatic chainsaw bars. They have a sandwich construction Sugihara’s own 1/4 .043 chain. Fast clean cutting and the best with two pieces of steel welded together and the internal space choice for a pole saw or smaller chainsaw. Sugihara 1/4 .043 filled with a punched blank. These bars are similar to Oregon Pro bars will not run the Stihl version of this chain (nor vice versa). Lite and Pro Am and Stihl Rollamatic chainsaw bars. Universal mount means that this bar will work with most chainsaws under 40cc. Part Number BC2M-0N28-A Weight 395g Part Number BN6M-4V30-A Weight 320g GROUP 1 HUSQVARNA 14 – 16″ GUIDE BARS 20

£54.00 Ex VAT £27.00 Ex VAT £64.80 Inc VAT £32.40 Inc VAT

Sugihara 14″ Light Type Pro Sugihara 14″ Pro Laminated

3/8 Lo Pro .050 – 52 drive links 1/4″ .050 – 76 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. One Rollamatic chainsaw bars. A sandwich construction with two of the best guide bars in the world today Sugihara Light Type bars pieces of steel welded together and the internal space filled with are the most popular version amongst tree professionals. This bar a punched blank. 1/4″pitch chain cuts a narrower kerf with more has a smaller radius nose to reduce kickback. cutting teeth giving a clean, fast and smooth cut. Remember to buy a 1/4″ pitch drive sprocket. Part Number BC3U-0N35-A Weight 470g Part Number BC2M-0F35-A Weight 475g

£27.00 Ex VAT £49.00 Ex VAT £32.40 Inc VAT £58.80 Inc VAT

Sugihara 14″ Pro Laminated Sugihara 14″ Pro Laminated + chain

3/8 Lo Pro .050 – 52 drive links 1/4 .043 – 76 drive links + chain These bars are similar to Oregon Pro Lite and Pro Am and Stihl Super thin laminated bar with sandwich construction that runs Rollamatic chainsaw bars. A sandwich construction with two Sugihara’s own 1/4 .043 chain. Fast clean cutting and the best pieces of steel welded together and the internal space filled with choice for a pole saw or smaller chainsaw. Sugihara 1/4 .043 a punched blank. These bars are similar to Oregon Pro Lite and bars will not run the Stihl version of this chain (nor vice versa). Pro Am and Stihl Rollamatic chainsaw bars. Part Number BN6M-4V35-A Weight 400g Part Number BC2M-0N35-A Weight 460g

£58.00 Ex VAT £30.00 Ex VAT £69.50 Inc VAT £36.00 Inc VAT

Sugihara 16″ Light Type Pro Sugihara 16″ Pro Laminated

3/8 Lo Pro .050 – 58 drive links 1/4″ .050 – 84 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. One Rollamatic chainsaw bars. A sandwich construction with two of the best guide bars in the world today Sugihara Light Type bars pieces of steel welded together and the internal space filled with are the most popular version amongst tree professionals. This bar a punched blank. 1/4″pitch chain cuts a narrower kerf with more has a smaller radius nose to reduce kickback. cutting teeth giving a clean, fast and smooth cut. Remember to buy a 1/4″ pitch drive sprocket. Part Number BC3U-0N40-A Weight 530g Part Number BC2M-0F40-A Weight 545g GROUP 1 HUSQVARNA 16 – 18″ GUIDE BARS 21

£30.00 Ex VAT £32.00 Ex VAT £36.00 Inc VAT £38.40 Inc VAT

Sugihara 16″ Pro Laminated Sugihara 18″ Pro Laminated

3/8 Lo Pro .050 – 58 drive links 1/4″ .050 – 92 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. They have a sandwich construction Rollamatic chainsaw bars. A sandwich construction with two with two pieces of steel welded together and the internal space pieces of steel welded together and the internal space filled with filled with a punched blank. These bars are similar to Oregon Pro a punched blank. 1/4″pitch chain cuts a narrower kerf with more Lite and Pro Am and Stihl Rollamatic chainsaw bars. cutting teeth giving a clean, fast and smooth cut. Remember to Part Number BC2M-0N45-A Weight 540g buy a 1/4″ pitch drive sprocket. Part Number BC2M-0F45-A Weight 630g

GROUP 3 HUSQVARNA 13″ GUIDE BARS

GROUP 3 Husqvarna Group 3 chainsaw tend to run .325 .058 chain as standard, but there are other options in the Chainsaw model Sugihara range. 39, 40, 42, 44, 45, 49, 50, 51, 55 57, 133, 134, 142, 154, 234, 235 Oregon ends K095 238, 240, 242, 246, 254, 257 Cannon C1 261, 262, 339, 340, 345XP, 346XP 350, 351, 353, 355, 357, 359 360, 440e, 445e, 450e, 455, 460 550XP, 555XP, 560XP

£52.00 Ex VAT £47.00 Ex VAT £62.40 Inc VAT £56.40 Inc VAT

Sugihara 13″ Light Type Pro Sugihara 13″ Pro Solid

.325 .058 – 56 drive links .325 .058 – 56 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar for sections removed and replaced with a rigid light weight resin. One long lasting performance in all conditions. Sprocket nose is of the best guide bars in the world today Sugihara Light Type bars replaceable. Superb durability, stiffness and wear characteristics are the most popular version amongst tree professionals. this is the benchmark Sugihara bar. Part Number BC3U-8J33-A Weight 580g Part Number BC3T-8J33-A Weight 650g GROUP 3 HUSQVARNA 14 – 15″ GUIDE BARS 22

£27.00 Ex VAT £60.00 Ex VAT £32.40 Inc VAT £72.00 Inc VAT

Sugihara 14″ Pro Laminated Sugihara 15″ Light Type Pro

.325 .050 – 60 drive links .325 .050 – 64 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar with Rollamatic chainsaw bars. These bars have been designed to run sections removed and replaced with a rigid light weight resin. Oregon 95TXL chain. This chain cuts a narrower kerf, similar to a These bars have been designed to run Oregon 95TXL chain. 3/8″ Lo Pro chain, but is still on a .325 chassis so it is not necessary This chain cuts a narrower kerf, similar to a 3/8″ Lo Pro chain, to change the drive sprocket. 10 tooth nose sprocket for more but is still on a .325 chassis so it is not necessary to change control and better boring. the drive sprocket. Part Number BC2M-0H35P-A Weight 475g Part Number BC3U-0J37-A Weight 630g

£60.00 Ex VAT £60.00 Ex VAT £72.00 Inc VAT £72.00 Inc VAT

Sugihara 15″ Light Type Pro Sugihara 15″ Light Type Pro

.325 .058 – 64 drive links .325 .063 – 64 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. One sections removed and replaced with a rigid light weight resin. One of the best guide bars in the world today Sugihara Light Type bars of the best guide bars in the world today Sugihara Light Type bars are the most popular version amongst tree professionals. are the most popular version amongst tree professionals. This is the .063 version – please note! Enables you to run the same chain Part Number BC3U-8J37-A Weight 670g (.325 .063) on both Stihl and saws. Part Number BC3U-3J37-A Weight 675g

£60.00 Ex VAT £29.00 Ex VAT £72.00 Inc VAT £34.80 Inc VAT

Sugihara 15″ Light Type Pro Sugihara 15″ Pro Laminated

3/8″ .058 – 56 drive links .325 .050 – 64 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. One Rollamatic chainsaw bars. These bars have been designed to of the best guide bars in the world today Sugihara Light Type bars run Oregon 95TXL chain. This chain cuts a narrower kerf, similar are the most popular version amongst tree professionals. This to a 3/8″ Lo Pro chain, but is still on a .325 chassis so it is not version allows you to run 3/8 .058 chain (usually the standard set necessary to change the drive sprocket. 10 tooth nose sprocket up is .325 .058). for more control and better boring. Part Number VH2U-8Q37-A Weight 730g Part Number BC2M-0H37P-A Weight 540g GROUP 3 HUSQVARNA 15″ GUIDE BARS 23

£29.00 Ex VAT £29.00 Ex VAT £34.80 Inc VAT £34.80 Inc VAT

Sugihara 15″ Pro Laminated Sugihara 15″ Pro Laminated

.325 .058 – 64 drive links .325 .058 – 64 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. They have a sandwich construction Rollamatic chainsaw bars. They have a sandwich construction with with two pieces of steel welded together and the internal space two pieces of steel welded together and the internal space filled with filled with a punched blank. These bars are similar to Oregon a punched blank. These bars are similar to Oregon Pro Lite and Pro Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. 10 Am and Stihl Rollamatic chainsaw bars. These bars are similar to tooth nose sprocket for more control and better boring. Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. Part Number BC2M-8H37-A Weight 635g Part Number BC2M-8J37-A Weight 675g

£29.00 Ex VAT £29.00 Ex VAT £34.80 Inc VAT £34.80 Inc VAT

Sugihara 15″ Pro Laminated Sugihara 15″ Pro Laminated

.325 .063 – 64 drive links 3/8 Lo Pro .050 – 56 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. They have a sandwich construction Rollamatic chainsaw bars. A sandwich construction with two with two pieces of steel welded together and the internal space pieces of steel welded together and the internal space filled with a filled with a punched blank. These bars are similar to Oregon Pro punched blank. These bars run 3/8″ Lo Pro .050 chain and enable Lite and Pro Am and Stihl Rollamatic chainsaw bars. This is the you to cut faster on all Group 3 chainsaws. Not recommended for .063 version – please note! Enables you to run the same chain Husky 560XP as the power of this saw and the way that power is (.325 .063) on both Stihl and Husky saws. delivered could more likely cause chain fracture. Part Number BC2M-3J37-A Weight 685g Part Number BC2M-0L38-A Weight 550g

£29.00 Ex VAT £56.00 Ex VAT £34.80 Inc VAT £67.20 Inc VAT

Sugihara 15″ Pro Laminated Sugihara 15″ Pro Solid

3/8″ .058 – 56 drive links .325 .058 – 64 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar for Rollamatic chainsaw bars. A sandwich construction with two long lasting performance in all conditions. Sprocket nose is pieces of steel welded together and the internal space filled with replaceable. Superb durability, stiffness and wear characteristics a punched blank. This version allows you to run 3/8 .058 chain this is the benchmark Sugihara bar. (usually the standard set up is .325 .058). Part Number BC3T-8J37-A Weight 780g Part Number VH2M-8Q37-A Weight 720g GROUP 3 HUSQVARNA 15 – 16″ GUIDE BARS 24

£56.00 Ex VAT £63.00 Ex VAT £67.20 Inc VAT £75.60 Inc VAT

Sugihara 15″ Pro Solid Sugihara 16″ Light Type Pro

3/8″ .058 – 56 drive links 3/8″ .058 – 60 drive links Sugihara single piece steel professional sprocket nose bar for long Sugihara single piece steel professional sprocket nose bar lasting performance in all conditions. Sprocket nose is replaceable. with sections removed and replaced with a rigid light weight Superb durability, stiffness and wear characteristics this is the resin. One of the best guide bars in the world today Sugihara benchmark Sugihara bar. This version allows you to run 3/8 .058 Light Type bars are the most popular version amongst tree chain (usually the standard set up is .325 .058). professionals. This version allows you to run 3/8 .058 chain (usually the standard set up is .325 .058). Part Number VH2T-8Q37-A Weight 850g Part Number VH2U-8Q40-A Weight 830g

£30.00 Ex VAT £30.00 Ex VAT £36.00 Inc VAT £36.00 Inc VAT

Sugihara 16″ Pro Laminated Sugihara 16″ Pro Laminated

.325 .050 – 66 drive links .325 .058 – 66 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. These bars have been designed to Rollamatic chainsaw bars. They have a sandwich construction run Oregon 95TXL chain. This chain cuts a narrower kerf, similar with two pieces of steel welded together and the internal space to a 3/8″ Lo Pro chain, but is still on a .325 chassis so it is not filled with a punched blank. These bars are similar to Oregon Pro necessary to change the drive sprocket. 10 tooth nose sprocket Lite and Pro Am and Stihl Rollamatic chainsaw bars. A sandwich for more control and better boring. construction with two pieces of steel welded together and the internal space filled with a punched blank. Part Number BC2M-0H40P-A Weight 570g Part Number BC2M-8J40-A Weight 715g

£30.00 Ex VAT £30.00 Ex VAT £36.00 Inc VAT £36.00 Inc VAT

Sugihara 16″ Pro Laminated Sugihara 16″ Pro Laminated

3/8 Lo Pro .050 – 60 drive links .325 .050 – 64 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. These bars run 3/8″ Lo Pro .050 Rollamatic chainsaw bars. A sandwich construction with two chain and enable you to cut faster on all Group 3 chainsaws. pieces of steel welded together and the internal space filled with Not recommended for Husky 560XP as the power of this saw a punched blank. This version allows you to run 3/8 .058 chain and the way that power is delivered could more likely cause (usually the standard set up is .325 .058). chain fracture. Part Number VH2M-8Q40-A Weight 880g Part Number BC2M-0L41-A Weight 610g GROUP 3 HUSQVARNA 16 – 18″ GUIDE BARS 25

£58.00 Ex VAT £66.00 Ex VAT £69.60 Inc VAT £79.20 Inc VAT

Sugihara 16″ Pro Solid Sugihara 18″ Light Type Pro

.325 .063 – 66 drive links .325 .050 – 72 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar with long lasting performance in all conditions. Sprocket nose is sections removed and replaced with a rigid light weight resin. These replaceable. Superb durability, stiffness and wear characteristics bars have been designed to run Oregon 95TXL chain. This chain cuts this is the benchmark Sugihara bar. a narrower kerf, similar to a 3/8″ Lo Pro chain, but is still on a .325 Part Number BC3T-8J40-A Weight 915g chassis so it is not necessary to change the drive sprocket. Part Number BC3U-0J45-A Weight 750g

£66.00 Ex VAT £66.00 Ex VAT £79.20 Inc VAT £79.20 Inc VAT

Sugihara 18″ Light Type Pro Sugihara 18″ Light Type Pro

.325 .058 – 72 drive links .325 .063 – 72 drive links Sugihara single piece steel professional sprocket nose bar Sugihara single piece steel professional sprocket nose bar with with sections removed and replaced with a rigid light weight sections removed and replaced with a rigid light weight resin. One resin. One of the best guide bars in the world today Sugihara of the best guide bars in the world today Sugihara Light Type bars Light Type bars are the most popular version amongst tree are the most popular version amongst tree professionals. This is professionals. the .063 version – please note! Enables you to run the same chain (.325 .063) on both Stihl and Husky saws. Part Number BC3U-8J45-A Weight 775g Part Number BC3U-3J45-A Weight 800g

£66.00 Ex VAT £32.00 Ex VAT £79.20 Inc VAT £38.40 Inc VAT

Sugihara 18″ Light Type Pro Sugihara 18″ Pro Laminated

3/8″ .058 – 68 drive links .325 .050 – 72 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. One Rollamatic chainsaw bars. These bars have been designed to of the best guide bars in the world today Sugihara Light Type bars run Oregon 95TXL chain. This chain cuts a narrower kerf, similar are the most popular version amongst tree professionals. This to a 3/8″ Lo Pro chain, but is still on a .325 chassis so it is not version allows you to run 3/8 .058 chain (usually the standard set necessary to change the drive sprocket. 10 tooth nose sprocket up is .325 .058). for more control and better boring. Part Number VH2U-8Q45-A Weight 945g Part Number BC2M-0H45P-A Weight 650 g GROUP 3 HUSQVARNA 18″ GUIDE BARS 26

£32.00 Ex VAT £32.00 Ex VAT £38.40 Inc VAT £38.40 Inc VAT

Sugihara 18″ Pro Laminated Sugihara 18″ Pro Laminated

.325 .058 – 72 drive links .325 .063 – 72 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. They have a sandwich construction Rollamatic chainsaw bars. They have a sandwich construction with two pieces of steel welded together and the internal space with two pieces of steel welded together and the internal space filled with a punched blank. These bars are similar to Oregon Pro filled with a punched blank. These bars are similar to Oregon Lite and Pro Am and Stihl Rollamatic chainsaw bars. Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. Part Number BC2M-8J45-A Weight 815g Part Number BC2M-3J45-A Weight 865g

£32.00 Ex VAT £32.00 Ex VAT £38.40 Inc VAT £38.40 Inc VAT

Sugihara 18″ Pro Laminated Sugihara 18″ Pro Laminated

3/8 Lo Pro .050 – 66 drive links .325 .063 – 64 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. These bars run 3/8″ Lo Pro .050 Rollamatic chainsaw bars. A sandwich construction with two chain and enable you to cut faster on all Group 3 chainsaws. pieces of steel welded together and the internal space filled with Not recommended for Husky 560XP as the power of this saw a punched blank. This version allows you to run 3/8 .058 chain and the way that power is delivered could more likely cause (usually the standard set up is .325 .058). chain fracture. Part Number VH2M-8Q45-A Weight 985g Part Number BC2M-0L46-A Weight 685g

£62.00 Ex VAT £62.00 Ex VAT £74.40 Inc VAT £74.40 Inc VAT

Sugihara 18″ Pro Solid Sugihara 18″ Pro Solid

.325 .058 – 72 drive links 3/8″ .058 – 68 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar for long lasting performance in all conditions. Sprocket nose is long lasting performance in all conditions. Sprocket nose is replaceable. Superb durability, stiffness and wear characteristics replaceable. Superb durability, stiffness and wear characteristics this is the benchmark Sugihara bar. this is the benchmark Sugihara bar. This version allows you to run 3/8 .058 chain (usually the standard set up is .325 .058). Part Number BC3T-8J45-A Weight 940g Part Number VH2T-8Q45-A Weight 1125g GROUP 3 HUSQVARNA 20 – 25″ GUIDE BARS 27

£73.00 Ex VAT £65.00 Ex VAT £87.60 Inc VAT £78.00 Inc VAT

Sugihara 20″ Light Type Pro Sugihara 20″ Light Type Pro

.325 .050 – 80 drive links .325 .058 – 80 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. These sections removed and replaced with a rigid light weight resin. bars have been designed to run Oregon 95TXL chain. This chain cuts One of the best guide bars in the world today Sugihara Light Type a narrower kerf, similar to a 3/8″ Lo Pro chain, but is still on a .325 bars are the most popular version amongst tree professionals. chassis so it is not necessary to change the drive sprocket. Part Number BC3U-8J50-A Weight 855g Part Number BC3U-0J50-A Weight 855g

£32.00 Ex VAT £68.00 Ex VAT £38.40 Inc VAT £81.60 Inc VAT

Sugihara 20″ Pro Laminated Sugihara 20″ Pro Solid

3/8 Lo Pro .050 – 72 drive links .325 .058 – 80 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar for Rollamatic chainsaw bars. A sandwich construction with two long lasting performance in all conditions. Sprocket nose is pieces of steel welded together and the internal space filled with a replaceable. Superb durability, stiffness and wear characteristics punched blank. These bars run 3/8″ Lo Pro .050 chain and enable this is the benchmark Sugihara bar. These bars have been you to cut faster on all Group 3 chainsaws. Not recommended for designed to run Oregon 95TXL chain. This chain cuts a narrower Husky 560XP as the power of this saw and the way that power is kerf, similar to a 3/8″ Lo Pro chain, but is still on a .325 chassis so delivered could more likely cause chain fracture. it is not necessary to change the drive sprocket. Part Number BC2M-0L51-A Weight 780g Part Number BC3T-0J50-A Weight 1035g

£82.00 Ex VAT £87.00 Ex VAT £98.40 Inc VAT £104.40 Inc VAT

Sugihara 25″ Pro Solid Sugihara 25″ Light Type Pro

.325 .058 – 92 drive links .325 .058 – 92 drive links Sugihara single piece steel professional sprocket nose bar Sugihara single piece steel professional sprocket nose bar with for long lasting performance in all conditions. Sprocket sections removed and replaced with a rigid light weight resin. One nose is replaceable. Superb durability, stiffness and wear of the best guide bars in the world today Sugihara Light Type bars characteristics this is the benchmark Sugihara bar. are the most popular version amongst tree professionals. Part Number BC3T-8J63-A Weight 1340g Part Number BC3U-8J63-A Weight 1120g GROUP 4 HUSQVARNA 15 – 16″ GUIDE BARS 28

GROUP 4 Husqvarna Group 4 chainsaws have the same mount as Group 5 but run 3/8″ .058 Chainsaw model chain as standard. 61, 64, 65, 66, 70, 77, 160, 162 163, 180, 181, 185, 260, 263, 266 Oregon ends D009 268, 272, 280, 281, 285, 288, 298 Cannon H1 362XP, 365, 365XP, 371, 372XP, 380, 385XP 390XP, 394XP, 395XP, 575XP, 576XP

£60.00 Ex VAT £29.00 Ex VAT £72.00 Inc VAT £34.80 Inc VAT

Sugihara 15″ Light Type Pro Sugihara 15″ Pro Laminated

3/8″ .058 – 56 drive links 3/8″ .058 – 56 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. Rollamatic chainsaw bars. A sandwich construction with two One of the best guide bars in the world today Sugihara Light Type pieces of steel welded together and the internal space filled with bars are the most popular version amongst tree professionals. a punched blank. Part Number VT3U-8Q37-A Weight 790g Part Number VT2L-8Q36-A Weight 770g

£66.00 Ex VAT £30.00 Ex VAT £79.20 Inc VAT £36.00 Inc VAT

Sugihara 16″ Light Type Pro Sugihara 16″ Pro Laminated

3/8″ .058 – 60 drive links 3/8″ .058 – 60 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and sections removed and replaced with a rigid light weight resin. One Stihl Rollamatic chainsaw bars. A sandwich construction with of the best guide bars in the world today Sugihara Light Type bars two pieces of steel welded together and the internal space filled are the most popular version amongst tree professionals. with a punched blank. Part Number VT3U-8Q40-A Weight 860g Part Number VT2L-8Q40-A Weight 850g GROUP 4 HUSQVARNA 18 – 20″ GUIDE BARS 29

£69.00 Ex VAT £32.00 Ex VAT £82.80 Inc VAT £38.40 Inc VAT

Sugihara 18″ Light Type Pro Sugihara 18″ Pro Laminated

3/8″ .058 – 68 drive links 3/8″ .058 – 68 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. One Rollamatic chainsaw bars. A sandwich construction with two of the best guide bars in the world today Sugihara Light Type bars pieces of steel welded together and the internal space filled are the most popular version amongst tree professionals. with a punched blank. Part Number VT3U-8Q45-A Weight 970g Part Number VT2M-8Q45-A Weight 1025g

£62.00 Ex VAT £73.00 Ex VAT £74.40 Inc VAT £87.60 Inc VAT

Sugihara 18″ Pro Solid Sugihara 20″ Light Type Pro

3/8″ .058 – 68 drive links 3/8″ .058 – 72 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar with long lasting performance in all conditions. Sprocket nose is sections removed and replaced with a rigid light weight resin. One replaceable. Superb durability, stiffness and wear characteristics of the best guide bars in the world today Sugihara Light Type bars this is the benchmark Sugihara bar. are the most popular version amongst tree professionals. Part Number VT3T-8Q45-A Weight 1145g Part Number VT3U-8Q50-A Weight 1050g

£36.00 Ex VAT £68.00 Ex VAT £43.20 Inc VAT £81.60 Inc VAT

Sugihara 20″ Pro Laminated Sugihara 20″ Pro Solid

3/8″ .058 – 72 drive links 3/8″ .058 – 72 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar for Rollamatic chainsaw bars. A sandwich construction with two long lasting performance in all conditions. Sprocket nose is pieces of steel welded together and the internal space filled with replaceable. Superb durability, stiffness and wear characteristics a punched blank. this is the benchmark Sugihara bar. Part Number VT2M-8Q50-A Weight 1110g Part Number VT3T-8Q50-A Weight 1235g GROUP 4 HUSQVARNA 24 – 36″ GUIDE BARS 30

£87.00 Ex VAT £82.00 Ex VAT £104.40 Inc VAT £98.40 Inc VAT

Sugihara 24″ Light Type Pro Sugihara 25″ Pro Solid

3/8″ .058 – 84 drive links 3/8″ .058 – 84 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar sections removed and replaced with a rigid light weight resin. One for long lasting performance in all conditions. Sprocket of the best guide bars in the world today Sugihara Light Type bars nose is replaceable. Superb durability, stiffness and wear are the most popular version amongst tree professionals. characteristics this is the benchmark Sugihara bar. Part Number VT3U-8Q62-A Weight 1305g Part Number VT3T-8Q62-A Weight 1540g

£98.00 Ex VAT £93.00 Ex VAT £117.60 Inc VAT £111.60 Inc VAT

Sugihara 28″ Light Type Pro Sugihara 28″ Pro Solid

3/8″ .058 – 92 drive links 3/8″ .058 – 92 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar for sections removed and replaced with a rigid light weight resin. One long lasting performance in all conditions. Sprocket nose is of the best guide bars in the world today Sugihara Light Type bars replaceable. Superb durability, stiffness and wear characteristics are the most popular version amongst tree professionals. this is the benchmark Sugihara bar. Part Number VT3U-8Q70-A Weight 1495g Part Number VT3T-8Q70-A Weight 1720g

£107.00 Ex VAT £131.00 Ex VAT £128.40 Inc VAT £157.20 Inc VAT

Sugihara 30″ Light Type Pro Sugihara 36″ Light Type Pro

3/8″ .058 – 102 drive links 3/8″ .063 – 115 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. One sections removed and replaced with a rigid light weight resin. One of the best guide bars in the world today Sugihara Light Type bars of the best guide bars in the world today Sugihara Light Type bars are the most popular version amongst tree professionals. are the most popular version amongst tree professionals. Part Number VT2U-8Q77-A Weight 1790g Part Number VT2U-3Q91-A Weight 2000g GROUP 4 HUSQVARNA 36 – 42″ GUIDE BARS 31

£120.00 Ex VAT £153.00 Ex VAT £144.00 Inc VAT £183.60 Inc VAT

Sugihara 36″ Pro Solid Sugihara 42″ Pro Solid

3/8″ .063 – 115 drive links 3/8″ .063 – 137 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar for long long lasting performance in all conditions. Sprocket nose is lasting performance in all conditions. Sprocket nose is replaceable. replaceable. Superb durability, stiffness and wear characteristics Superb durability, stiffness and wear characteristics this is the this is the benchmark Sugihara bar. benchmark Sugihara bar. Part Number VT2T-3Q91-A Weight 2000g Part Number VT2T-3Q105-A Weight 3000g

GROUP 5 HUSQVARNA 36″ GUIDE BARS

Chainsaw model 1100, 2100, 2101, 3120XP

Husqvarna Group 5 chainsaws have the same mount as Group 4 but tend to run .404 chain as standard.

Oregon ends D009 Cannon H1

£131.00 Ex VAT £120.00 Ex VAT £157.20 Inc VAT £144.00 Inc VAT

Sugihara 36″ Light Type Pro Sugihara 36″ Pro Solid

.404 .063 – 104 drive links .404 .063 – 104 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar for sections removed and replaced with a rigid light weight resin. One long lasting performance in all conditions. Sprocket nose is of the best guide bars in the world today Sugihara Light Type bars replaceable. Superb durability, stiffness and wear characteristics are the most popular version amongst tree professionals. This bar this is the benchmark Sugihara bar. has a smaller radius nose to reduce kickback. Part Number VF2T-3S90-A Weight 2000g Part Number VF2U-3S90-A Weight 2000g GROUP 5 HUSQVARNA 36 – 46″ GUIDE BARS 32

£120.00 Ex VAT £153.00 Ex VAT £144.00 Inc VAT £183.60 Inc VAT

Sugihara 36″ Pro Solid Sugihara 42″ Pro Solid

.404 .063 – 104 drive links .404 .063 – 124 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar long lasting performance in all conditions. Sprocket nose is for long lasting performance in all conditions. Sprocket replaceable. Superb durability, stiffness and wear characteristics nose is replaceable. Superb durability, stiffness and wear this is the benchmark Sugihara bar. characteristics this is the benchmark Sugihara bar. Part Number VF2T-3S90-A Weight 2000g Part Number VF2T-3S105-A Weight 3000g

£199.00 Ex VAT £238.80 Inc VAT

Sugihara 46″ Pro Solid

.404 .063 – 132 drive links Sugihara single piece steel professional sprocket nose bar for long lasting performance in all conditions. Sprocket nose is replaceable. Superb durability, stiffness and wear characteristics this is the benchmark Sugihara bar. Part Number VF2T-3S115-A Weight 3000g FIND YOUR ECHO CHAINSAW MODEL – GROUPS 0 – 4 33

GROUP 0 – PG 34 GROUP 3 – PG 37 Chainsaw model Chainsaw model 2511TES 390ESX, CS420ES, CS501SX CS40EVL, CS360EVL, CS400EVL CS440EVL, CS440EVLH GROUP 1 – PG 34 CS400, CS410, CS450, CS510, CS520, CS3600 Chainsaw model CS3700, CS3900, CS4000, CS4010, CS4100 CS280EG, CS4200, CS4400, CS4500, CS4510, CS4600 CS310ES, CS352ES, CS370ES CS4610, CS5000, CS5100, CS5500, CS5501, CS281WES, CS360WES, CS361WES CS6700 CS280TES, CS360TES CS280, CS290, CS300, CS301, CS302, CS305 Sugi Mount BM3 CS315, CS328, CS330, CS340, CS341, CS345, Oregon ends K041 CS346, CS350, CS351, CS360, CS370, CS2600 CS2700, CS2800, CS2900, CS3000, CS3050 CS3350, CS3400, CS3450, CS3500, CS4400 GROUP 4 – PG 38 CS280EVL, CS285EVL, CS290EVL, CS300EVL Chainsaw model CS320EVL, CS330EVL, CS330EVL, CS360EVL 6702, 6800, CS60 CS304VL, CS351VL, CS280EG, S2600ESC CS500EVL, CS510EVL, CS550EVL CS260TSEC, CS285EL, CS270E, CS280E CS600EVL, CS650EVL, CS702EVL E155, ECS150, ESC1850FT, S2000 CS451VL, CS452VL, CS500VL CS602VL, CS610VL, CS660VL, CS750VL Sugi Mount BL1, BL2 and EM1 CS5000, CS5500, CS5501, CS6700, CS6701 Oregon ends A041 CS8000, CS8001, CS8002 CS550, CS620SX, CS680 CS8000, CS8001, CS8002

Sugi starts XT2 Oregon ends D176 GROUP 0 ECHO 10 – 14″ GUIDE BARS 34

£23.00 Ex VAT £27.60 Inc VAT Chainsaw model 2511TES

Sugihara 10″ Pro Laminated

1/4 .043 – 60 drive links + chain Super thin laminated bar with sandwich construction that runs Sugihara’s own 1/4 .043 chain. Fast clean cutting and the best choice for a pole saw or smaller chainsaw. Sugihara 1/4 .043 bars will not run the Stihl version of this chain (nor vice versa).You will require a 1/4 drive sprocket to run this bar. Dedicated small Echo mount. Part Number EM1M-4V25-A Weight 240g

£25.00 Ex VAT £27.00 Ex VAT £30.00 Inc VAT £32.40 Inc VAT

Sugihara 12″ Pro Laminated Sugihara 14″ Pro Laminated

1/4 .043 – 68 drive links 1/4 .043 – 76 drive links Super thin laminated bar with sandwich construction that runs Super thin laminated bar with sandwich construction that runs Sugihara’s own 1/4 .043 chain. Fast clean cutting and the Sugihara’s own 1/4 .043 chain. Fast clean cutting and the best choice for a pole saw or smaller chainsaw. Sugihara 1/4 best choice for a pole saw or smaller chainsaw. Sugihara 1/4 .043 bars will not run the Stihl version of this chain (nor vice .043 bars will not run the Stihl version of this chain (nor vice versa). Universal mount means that this bar will work with most versa). Universal mount means that this bar will work with most chainsaws under 40cc. chainsaws under 40cc. Part Number BN6M-4V30-A Weight 320g Part Number BN6M-4V35-A Weight 400g

GROUP 1 ECHO

Chainsaw model CS280EVL, CS285EVL, CS290EVL, CS300EVL CS280EG, CS320EVL, CS330EVL, CS330EVL, CS360EVL CS310ES, CS352ES, CS370ES CS304VL, CS351VL, CS280EG, S2600ESC CS281WES, CS360WES, CS361WES CS260TSEC, CS285EL, CS270E, CS280E CS280TES, CS360TES E155, ECS150, ESC1850FT, S2000 CS280, CS290, CS300, CS301, CS302, CS305 CS315, CS328, CS330, CS340, CS341, CS345, Sugi Mount BL1, BL2 and EM1 CS346, CS350, CS351, CS360, CS370, CS2600 Oregon ends A041 CS2700, CS2800, CS2900, CS3000, CS3050 CS3350, CS3400, CS3450, CS3500, CS4400 GROUP 1 ECHO 8 – 12″ GUIDE BARS 35

£21.00 Ex VAT £23.00 Ex VAT £25.20 Inc VAT £27.60 Inc VAT

Sugihara 8″ Pro Laminated Sugihara 10″ Pro Laminated

1/4″ .050 – 52 drive links 1/4″ .050 – 60 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Super thin laminated bar with sandwich construction that runs Rollamatic chainsaw bars. A sandwich construction with two pieces Sugihara’s own 1/4 .043 chain. Fast clean cutting and the best of steel welded together and the internal space filled with a punched choice for a pole saw or smaller chainsaw. Sugihara 1/4 .043 bars blank. 1/4″pitch chain cuts a narrower kerf with more cutting teeth will not run the Stihl version of this chain (nor vice versa). giving a clean, fast and smooth cut. Remember to buy a 1/4″ pitch drive sprocket. This bar has a smaller x10 tooth nose sprocket. Part Number EM1M-0V25-A Weight 290g Part Number EM1M-0V20-A Weight 235g

£23.00 Ex VAT £49.00 Ex VAT £27.60 Inc VAT £58.80 Inc VAT

Sugihara 10″ Pro Laminated + chain Sugihara 12″ Light Type Pro

1/4 .043 – 60 drive links 3/8 Lo Pro .050 – 47 drive links Super thin laminated bar with sandwich construction that runs Sugihara single piece steel professional sprocket nose bar with Sugihara’s own 1/4 .043 chain. Fast clean cutting and the best sections removed and replaced with a rigid light weight resin. One choice for a pole saw or smaller chainsaw. Sugihara 1/4 .043 of the best guide bars in the world today Sugihara Light Type bars bars will not run the Stihl version of this chain (nor vice versa). are the most popular version amongst tree professionals. This bar Part Number EM1M-4V25-A Weight 240g has a smaller nose radius for reduced kickback. Part Number BL2U-0N30-A Weight 400g

£25.00 Ex VAT £25.00 Ex VAT £30.00 Inc VAT £30.00 Inc VAT

Sugihara 12″ Pro Laminated Sugihara 12″ Pro Laminated

3/8 Lo Pro .050 – 47 drive links 1/4″ .050 – 68 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. They have a sandwich construction Rollamatic chainsaw bars. A sandwich construction with two pieces with two pieces of steel welded together and the internal space of steel welded together and the internal space filled with a punched filled with a punched blank. These bars are similar to Oregon Pro blank. 1/4″pitch chain cuts a narrower kerf with more cutting teeth Lite and Pro Am and Stihl Rollamatic chainsaw bars. A sandwich giving a clean, fast and smooth cut. Remember to buy a 1/4″ pitch construction with two pieces of steel welded together and the drive sprocket. This bar has a x12 tooth nose sprocket. internal space filled with a punched blank. Part Number EM1M-0F30-A Weight 405g Part Number BL1M-0L30-A Weight 475g GROUP 1 ECHO 12 – 16″ GUIDE BARS 36

£47.00 Ex VAT £54.00 Ex VAT £56.40 Inc VAT £64.80 Inc VAT

Sugihara 12″ Pro Laminated + chain Sugihara 14″ Light Type Pro

1/4 .043 – 68 drive links + chain (Universal mount) 3/8 Lo Pro .050 – 53 drive links Super thin laminated bar with sandwich construction that runs Sugihara single piece steel professional sprocket nose bar with Sugihara’s own 1/4 .043 chain. Fast clean cutting and the best sections removed and replaced with a rigid light weight resin. One choice for a pole saw or smaller chainsaw. Sugihara 1/4 .043 of the best guide bars in the world today Sugihara Light Type bars bars will not run the Stihl version of this chain (nor vice versa). are the most popular version amongst tree professionals. This bar Universal mount means that this bar will work with most has a smaller nose radius for reduced kickback. chainsaws under 40cc. Part Number BL2U-0N35-A Weight 470g Part Number BN6M-4V30-A Weight 320g

£27.00 Ex VAT £27.00 Ex VAT £32.40 Inc VAT £32.40 Inc VAT

Sugihara 14″ Pro Laminated Sugihara 14″ Pro Laminated

3/8 Lo Pro .050 – 53 drive links 1/4″ .050 – 76 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. They have a sandwich construction Rollamatic chainsaw bars. A sandwich construction with two with two pieces of steel welded together and the internal space pieces of steel welded together and the internal space filled with filled with a punched blank. These bars are similar to Oregon Pro a punched blank. 1/4″pitch chain cuts a narrower kerf with more Lite and Pro Am and Stihl Rollamatic chainsaw bars. cutting teeth giving a clean, fast and smooth cut. Remember to buy a 1/4″ pitch drive sprocket. This bar has a x12 tooth nose sprocket. Part Number BL1M-0L35-A Weight 515g Part Number EM1M-0F35-A Weight 470g

£49.00 Ex VAT £58.00 Ex VAT £58.80 Inc VAT £69.60 Inc VAT

Sugihara 14″ Pro Laminated + chain Sugihara 16″ Light Type Pro

1/4 .043 – 76 drive links + chain 3/8 Lo Pro .050 58 drive links Super thin laminated bar with sandwich construction that runs Sugihara single piece steel professional sprocket nose bar with Sugihara’s own 1/4 .043 chain. Fast clean cutting and the best sections removed and replaced with a rigid light weight resin. One choice for a pole saw or smaller chainsaw. Sugihara 1/4 .043 of the best guide bars in the world today Sugihara Light Type bars bars will not run the Stihl version of this chain (nor vice versa). are the most popular version amongst tree professionals. This bar has a smaller nose radius for reduced kickback. Part Number VH2U-8Q37-A Weight 395g Part Number BL2U-0N40-A Weight 535g GROUP 1 ECHO 16″ GUIDE BARS 37

£30.00 Ex VAT £30.00 Ex VAT £36.00 Inc VAT £36.00 Inc VAT

Sugihara 16″ Pro Laminated Sugihara 16″ Pro Laminated

3/8 Lo Pro .050 – 58 drive links 1/4″ .050 – 84 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. They have a sandwich construction Rollamatic chainsaw bars. A sandwich construction with two pieces with two pieces of steel welded together and the internal space of steel welded together and the internal space filled with a punched filled with a punched blank. These bars are similar to Oregon blank. 1/4″pitch chain cuts a narrower kerf with more cutting teeth Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. giving a clean, fast and smooth cut. Remember to buy a 1/4″ pitch Part Number BL1M-0L40-A Weight 585g drive sprocket. This bar has a x13 tooth nose sprocket. Part Number BL1M-0G40-A Weight 595g

GROUP 3 ECHO 13 – 15″ GUIDE BARS

GROUP 3 Chainsaw model Sugi Mount BM3 390ESX, CS420ES, CS501SX Oregon ends K041 CS40EVL, CS360EVL, CS400EVL CS440EVL, CS440EVLH CS400, CS410, CS450, CS510, CS520, CS3600 CS3700, CS3900, CS4000, CS4010, CS4100 CS4200, CS4400, CS4500, CS4510, CS4600 CS4610, CS5000, CS5100, CS5500, CS5501, CS6700

£52.00 Ex VAT £47.00 Ex VAT £62.40 Inc VAT £56.40 Inc VAT

Sugihara 13″ Light Type Pro Sugihara 13″ Pro Solid

.325 .058 – 56 drive links .325 .058 – 56 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar for sections removed and replaced with a rigid light weight resin. long lasting performance in all conditions. Sprocket nose is One of the best guide bars in the world today Sugihara Light Type replaceable. Superb durability, stiffness and wear characteristics bars are the most popular version amongst tree professionals. this is the benchmark Sugihara bar. Part Number BM3U-8J33-A Weight 575g Part Number BM3T-8J33-A Weight 645g GROUP 3 ECHO 15 – 20″ GUIDE BARS 38

£60.00 Ex VAT £56.00 Ex VAT £72.00 Inc VAT £67.20 Inc VAT

Sugihara 15″ Light Type Pro Sugihara 15″ Pro Solid

.325 .058 – 64 drive links .325 .058 – 64 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar sections removed and replaced with a rigid light weight resin. for long lasting performance in all conditions. Sprocket One of the best guide bars in the world today Sugihara Light Type nose is replaceable. Superb durability, stiffness and wear bars are the most popular version amongst tree professionals. characteristics this is the benchmark Sugihara bar. Part Number BM3U-8J37-A Weight 660g Part Number BM3T-8J37-A Weight 775g

£66.00 Ex VAT £36.00 Ex VAT £79.20 Inc VAT £43.20 Inc VAT

Sugihara 18″ Light Type Pro Sugihara 20″ Pro Laminated

.325 .058 – 72 drive links .325 .058 – 80 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. Rollamatic chainsaw bars. They have a sandwich construction One of the best guide bars in the world today Sugihara Light Type with two pieces of steel welded together and the internal space bars are the most popular version amongst tree professionals. filled with a punched blank. These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. Part Number BM3U-8J45-A Weight 775g Part Number BM2M-8J50-A Weight 940g

GROUP 4 ECHO 15 – 20″ GUIDE BARS

GROUP 4 CS8000, CS8001, CS8002 Chainsaw model CS550, CS620SX, CS680 6702, 6800, CS60 CS8000, CS8001, CS8002 CS500EVL, CS510EVL, CS550EVL CS600EVL, CS650EVL, CS702EVL Sugi starts XT2 CS451VL, CS452VL, CS500VL Oregon ends D176 CS602VL, CS610VL, CS660VL, CS750VL CS5000, CS5500, CS5501, CS6700, CS6701 GROUP 4 ECHO 15 – 20″ GUIDE BARS 39

£60.00 Ex VAT £32.00 Ex VAT £72.00 Inc VAT £38.40 Inc VAT

Sugihara 15″ Light Type Pro Sugihara 18″ Pro Laminated

3/8″ .058 – 56 drive links 3/8 .058 – 66 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. Rollamatic chainsaw bars. A sandwich construction with two pieces One of the best guide bars in the world today Sugihara Light Type of steel welded together and the internal space filled with a punched bars are the most popular version amongst tree professionals. blank. Part Number XT2U-8Q36-A Weight 815g Part Number XT2M-8Q45-A Weight 1010g

£69.00 Ex VAT £36.00 Ex VAT £82.80 Inc VAT £43.20 Inc VAT

Sugihara 18″ Light Type Pro Sugihara 20″ Pro Laminated

3/8″ .058 – 66 drive links 3/8 Lo Pro .050 – 72 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. Rollamatic chainsaw bars. A sandwich construction with two One of the best guide bars in the world today Sugihara Light Type pieces of steel welded together and the internal space filled with bars are the most popular version amongst tree professionals. a punched blank. This bar runs the smaller 3/8 Lo Pro chain combined with a sightly smaller nose for a lower risk of kickback. Part Number XT2U-8Q45-A Weight 985g Part Number XT2M-0L51-A Weight 900g

£73.00 Ex VAT £68.00 Ex VAT £87.60 Inc VAT £81.60 Inc VAT

Sugihara 20″ Light Type Pro Sugihara 20″ Pro Solid

3/8″ .058 – 72 drive links 3/8″ .058 – 72 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar for sections removed and replaced with a rigid light weight resin. long lasting performance in all conditions. Sprocket nose is One of the best guide bars in the world today Sugihara Light Type replaceable. Superb durability, stiffness and wear characteristics bars are the most popular version amongst tree professionals. this is the benchmark Sugihara bar. Part Number XT2U-8Q50-A Weight 1085g Part Number XT2T-8Q51-A Weight 1320g GROUP 4 ECHO 15 – 20″ GUIDE BARS 40

£87.00 Ex VAT £98.00 Ex VAT £104.40 Inc VAT £117.60 Inc VAT

Sugihara 24″ Light Type Pro Sugihara 28″ Light Type Pro

3/8″ .058 – 84 drive links 3/8″ .058 – 92 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. sections removed and replaced with a rigid light weight resin. One of the best guide bars in the world today Sugihara Light Type One of the best guide bars in the world today Sugihara Light Type bars are the most popular version amongst tree professionals. bars are the most popular version amongst tree professionals. Part Number XT2U-8Q61-A Weight 1380g Part Number XT2U-8Q70-A Weight 1600g

£93.00 Ex VAT £111.60 Inc VAT

Sugihara 28″ Pro Solid

3/8″ .058 92 drive links Sugihara single piece steel professional sprocket nose bar for long lasting performance in all conditions. Sprocket nose is replaceable. Superb durability, stiffness and wear characteristics this is the benchmark Sugihara bar. Part Number XT2T-8Q70-A Weight 1820g

FIND YOUR DOLMAR CHAINSAW MODEL – GROUPS 1 – 5

GROUP 1 GROUP 3 GROUP 4 GROUP 5 – PG 41 – PG 43 – PG 49 – PG 53 Chainsaw model Chainsaw model Chainsaw model Chainsaw model PS222TH, PS3410TH PS460, PS4605C, PS500 PS6400, PS7310 133, 153, 166, PS32C, PS35C PS5105C, 115, PS7910 PS 9010 PS3410, PS350FC, 116, PS6100 PS9010 (standard PS420C (with 9mm studs) 14mm studs) GROUP 1 DOLMAR 8 – 12″ GUIDE BARS 41

£21.00 Ex VAT £23.00 Ex VAT £25.20 Inc VAT £27.60 Inc VAT

Sugihara 8″ Pro Laminated Sugihara 10″ Pro Laminated

1/4″ .050 – 52 drive links 1/4″ .050 – 60 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. 1/4″pitch chain cuts a narrower kerf Rollamatic chainsaw bars. 1/4″pitch chain cuts a narrower kerf with more cutting teeth giving a clean, fast and smooth cut. with more cutting teeth giving a clean, fast and smooth cut. Remember to buy a 1/4″ pitch drive sprocket. This bar has a Remember to buy a 1/4″ pitch drive sprocket. This bar has a smaller x10 tooth nose sprocket. smaller x10 tooth nose sprocket. Part Number EM1M-0V20-A Weight 235g Part Number EM1M-0V25-A Weight 290g

£49.00 Ex VAT £25.00 Ex VAT £58.80 Inc VAT £30.00 Inc VAT

Sugihara 12″ Light Type Pro Sugihara 12″ Pro Laminated

3/8 Lo Pro .050 – 47 drive links 3/8 Lo Pro .050 – 47 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. Rollamatic chainsaw bars. They have a sandwich construction One of the best guide bars in the world today Sugihara Light Type with two pieces of steel welded together and the internal space bars are the most popular version amongst tree professionals. filled with a punched blank. These bars are similar to Oregon Pro This bar has a smaller nose radius for reduced kickback. Lite and Pro Am and Stihl Rollamatic chainsaw bars. Part Number BL2U-0N30-A Weight 400g Part Number BL1M-0L30-A Weight 475g

£25.00 Ex VAT £47.00 Ex VAT £30.00 Inc VAT £56.40 Inc VAT

GROUP 5 – PG 53 Sugihara 12″ Pro Laminated Sugihara 12″ Pro Laminated + chain Chainsaw model 133, 153, 166, 1/4″ .050 – 68 drive links 1/4 .043 – 68 drive links PS 9010 These bars are similar to Oregon Pro Lite and Pro Am and Stihl Super thin laminated bar with sandwich construction that runs Rollamatic chainsaw bars. 1/4″pitch chain cuts a narrower kerf Sugihara’s own 1/4 .043 chain. Fast clean cutting and the best (standard with more cutting teeth giving a clean, fast and smooth cut. choice for a pole saw or smaller chainsaw. Sugihara 1/4 .043 14mm studs) Remember to buy a 1/4″ pitch drive sprocket. This bar has a x12 bars will not run the Stihl version of this chain (nor vice versa). tooth nose sprocket. Universal mount means that this bar will work with most chainsaws under 40cc. Part Number EM1M-0F30-A Weight 405g Part Number BN6M-4V30-A Weight 320g GROUP 1 DOLMAR 14 – 16″ GUIDE BARS 42

£54.00 Ex VAT £27.00 Ex VAT £64.80 Inc VAT £32.40 Inc VAT

Sugihara 14″ Light Type Pro Sugihara 14″ Pro Laminated

3/8 Lo Pro .050 – 53 drive links 3/8 Lo Pro .050 – 53 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. Rollamatic chainsaw bars. They have a sandwich construction One of the best guide bars in the world today Sugihara Light Type with two pieces of steel welded together and the internal space bars are the most popular version amongst tree professionals. filled with a punched blank. These bars are similar to Oregon This bar has a smaller nose radius for reduced kickback. Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. Part Number BL2U-0N35-A Weight 470g Part Number BL1M-0L35-A Weight 515g

£27.00 Ex VAT £49.00 Ex VAT £32.40 Inc VAT £58.80 Inc VAT

Sugihara 14″ Pro Laminated Sugihara 14″ Pro Laminated + chain

1/4″ .050 – 76 drive links 1/4 .043 – 76 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Super thin laminated bar with sandwich construction that runs Rollamatic chainsaw bars. A sandwich construction with two Sugihara’s own 1/4 .043 chain. Fast clean cutting and the pieces of steel welded together and the internal space filled with best choice for a pole saw or smaller chainsaw. Sugihara 1/4 a punched blank. 1/4″pitch chain cuts a narrower kerf with more .043 bars will not run the Stihl version of this chain (nor vice cutting teeth giving a clean, fast and smooth cut. Remember to buy versa). Universal mount means that this bar will work with most a 1/4″ pitch drive sprocket. This bar has a x12 tooth nose sprocket. chainsaws under 40cc. Part Number EM1M-0F35-A Weight 470g Part Number BN6M-4V35-A Weight 395g

£58.00 Ex VAT £30.00 Ex VAT £69.60 Inc VAT £36.00 Inc VAT

Sugihara 16″ Light Type Pro Sugihara 16″ Pro Laminated

3/8 Lo Pro .050 – 58 drive links 3/8 Lo Pro .050 – 58 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. One Rollamatic chainsaw bars. They have a sandwich construction of the best guide bars in the world today Sugihara Light Type bars with two pieces of steel welded together and the internal space are the most popular version amongst tree professionals. This bar filled with a punched blank. These bars are similar to Oregon Pro has a smaller nose radius for reduced kickback. Lite and Pro Am and Stihl Rollamatic chainsaw bars. Part Number BL2U-0N40-A Weight 535g Part Number BL1M-0L40-A Weight 585g GROUP 1 DOLMAR 16″ GUIDE BARS 43

£30.00 Ex VAT £36.00 Inc VAT

Sugihara 16″ Pro Laminated

1/4″ .050 – 84 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. 1/4″pitch chain cuts a narrower kerf with more cutting teeth giving a clean, fast and smooth cut. Remember to buy a 1/4″ pitch drive sprocket. This bar has a x13 tooth nose sprocket. Part Number BL1M-0G40-A Weight 595g

£00.00 Ex VAT GROUP 3 DOLMAR 13 – 14″ GUIDE BARS £00.00 Inc VAT

£52.00 Ex VAT GROUP 3 £62.40 Inc VAT Chainsaw model PS460, PS4605C, PS500 PS5105C, 115, 116 PS6100 Sugihara 13″ Light Type Pro

.325 .058 – 56 drive links Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. One of the best guide bars in the world today Sugihara Light Type bars are the most popular version amongst tree professionals. Part Number BC3U-8J33-A Weight 580g

£47.00 Ex VAT £27.00 Ex VAT £56.40 Inc VAT £32.40 Inc VAT

Sugihara 13″ Pro Solid Sugihara 14″ Pro Laminated

.325 .058 – 56 drive links .325 .050 – 60 drive links Sugihara single piece steel professional sprocket nose bar for These bars are similar to Oregon Pro Lite and Pro Am and Stihl long lasting performance in all conditions. Sprocket nose is Rollamatic chainsaw bars. These bars have been designed to replaceable. Superb durability, stiffness and wear characteristics run Oregon 95TXL chain. This chain cuts a narrower kerf, similar this is the benchmark Sugihara bar. to a 3/8″ Lo Pro chain, but is still on a .325 chassis so it is not necessary to change the drive sprocket. 10 tooth nose sprocket Part Number BC3T-8J33-A Weight 650g for more control and better boring. Part Number BC2M-0H35P-A Weight 475g GROUP 3 DOLMAR 15″ GUIDE BARS 44

£60.00 Ex VAT £60.00 Ex VAT £72.00 Inc VAT £72.00 Inc VAT

Sugihara 15″ Light Type Pro Sugihara 15″ Light Type Pro

.325 .058 – 64 drive links .325 .063 – 64 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar sections removed and replaced with a rigid light weight resin. with sections removed and replaced with a rigid light weight One of the best guide bars in the world today Sugihara Light Type resin. One of the best guide bars in the world today Sugihara bars are the most popular version amongst tree professionals. Light Type bars are the most popular version amongst tree professionals. This is the .063 version – please note! Enables you Part Number BC3U-8J37-A Weight 670g to run the same chain (.325 .063) on both Stihl and Husky saws. Part Number BC3U-3J37-A Weight 675g

£60.00 Ex VAT £29.00 Ex VAT £72.00 Inc VAT £34.80 Inc VAT

Sugihara 15″ Light Type Pro Sugihara 15″ Pro Laminated

3/8″ .058 – 56 drive links .325 .050 – 64 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. One Rollamatic chainsaw bars. These bars have been designed to of the best guide bars in the world today Sugihara Light Type bars run Oregon 95TXL chain. This chain cuts a narrower kerf, similar are the most popular version amongst tree professionals. This to a 3/8″ Lo Pro chain, but is still on a .325 chassis so it is not version allows you to run 3/8 .058 chain (usually the standard set necessary to change the drive sprocket. 10 tooth nose sprocket up is .325 .058). for more control and better boring. Part Number VH2U-8Q37-A Weight 730g Part Number BC2M-0H37P-A Weight 540g

£29.00 Ex VAT £29.00 Ex VAT £34.80 Inc VAT £34.80 Inc VAT

Sugihara 15″ Pro Laminated Sugihara 15″ Pro Laminated

.325 .058 – 64 drive links .325 .058 – 64 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. These bars are similar to Oregon Pro Rollamatic chainsaw bars. They have a sandwich construction Lite and Pro Am and Stihl Rollamatic chainsaw bars. A sandwich with two pieces of steel welded together and the internal space construction with two pieces of steel welded together and the filled with a punched blank. These bars are similar to Oregon Pro internal space filled with a punched blank. 10 tooth nose sprocket Lite and Pro Am and Stihl Rollamatic chainsaw bars. for more control and better boring. Part Number BC2M-8J37-A Weight 675g Part Number BC2M-8H37-A Weight 635g GROUP 3 DOLMAR 15 – 16″ GUIDE BARS 45

£29.00 Ex VAT £29.00 Ex VAT £34.80 Inc VAT £34.80 Inc VAT

Sugihara 15″ Pro Laminated Sugihara 15″ Pro Laminated

.325 .063 – 64 drive links 3/8 Lo Pro .050 – 56 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. A sandwich construction with two Rollamatic chainsaw bars. These bars run 3/8″ Lo Pro .050 pieces of steel welded together and the internal space filled chain and enable you to cut faster on all Group 3 chainsaws. Not with a punched blank. This is the .063 version – please note! recommended for Husky 560XP as the power of this saw and the Enables you to run the same chain (.325 .063) on both Stihl way that power is delivered could more likely cause chain fracture. and Husky saws. Part Number BC2M-0L38-A Weight 550g Part Number BC2M-3J37-A Weight 685g

£29.00 Ex VAT £56.00 Ex VAT £34.80 Inc VAT £67.20 Inc VAT

Sugihara 15″ Pro Lam Sugihara 15″ Pro Solid

3/8″ .058 – 56 drive links .325 .058 – 64 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar for Rollamatic chainsaw bars. A sandwich construction with two long lasting performance in all conditions. Sprocket nose is pieces of steel welded together and the internal space filled with replaceable. Superb durability, stiffness and wear characteristics a punched blank. This version allows you to run 3/8 .058 chain this is the benchmark Sugihara bar. (usually the standard set up is .325 .058). Part Number BC3T-8J37-A Weight 780g Part Number VH2M-8Q37-A Weight 720g

£56.00 Ex VAT £63.00 Ex VAT £67.20 Inc VAT £75.60 Inc VAT

Sugihara 15″ Pro Solid Sugihara 16″ Light Type Pro

3/8″ .058 – 56 drive links 3/8″ .058 – 60 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar with long lasting performance in all conditions. Sprocket nose is sections removed and replaced with a rigid light weight resin. One replaceable. Superb durability, stiffness and wear characteristics of the best guide bars in the world today Sugihara Light Type bars this is the benchmark Sugihara bar. This version allows you to run are the most popular version amongst tree professionals. This 3/8 .058 chain (usually the standard set up is .325 .058). version allows you to run 3/8 .058 chain (usually the standard set up is .325 .058). Part Number VH2T-8Q37-A Weight 850g Part Number VH2U-8Q40-A Weight 830g GROUP 3 DOLMAR 16 – 18″ GUIDE BARS 46

£30.00 Ex VAT £30.00 Ex VAT £36.00 Inc VAT £36.00 Inc VAT

Sugihara 16″ Pro Laminated Sugihara 16″ Pro Laminated

.325 .050 – 66 drive links .325 .058 – 66 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. These bars have been designed to Rollamatic chainsaw bars. They have a sandwich construction run Oregon 95TXL chain. This chain cuts a narrower kerf, similar with two pieces of steel welded together and the internal space to a 3/8″ Lo Pro chain, but is still on a .325 chassis so it is not filled with a punched blank. These bars are similar to Oregon necessary to change the drive sprocket. 10 tooth nose sprocket Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. for more control and better boring. Part Number BC2M-8J40-A Weight 715g Part Number BC2M-0H40P-A Weight 570g

£30.00 Ex VAT £30.00 Ex VAT £36.00 Inc VAT £36.00 Inc VAT

Sugihara 16″ Pro Laminated Sugihara 16″ Pro Laminated

3/8 Lo Pro .050 – 60 drive links 3/8″ .058 – 60 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. A sandwich construction with two Rollamatic chainsaw bars. A sandwich construction with two pieces of steel welded together and the internal space filled with a pieces of steel welded together and the internal space filled with punched blank. These bars run 3/8″ Lo Pro .050 chain and enable a punched blank. This version allows you to run 3/8 .058 chain you to cut faster on all Group 3 chainsaws. Not recommended for (usually the standard set up is .325 .058). Husky 560XP as the power of this saw and the way that power is Part Number VH2M-8Q40-A Weight 880g delivered could more likely cause chain fracture. Part Number BC2M-0L41-A Weight 610g

£58.00 Ex VAT £66.00 Ex VAT £69.60 Inc VAT £79.20 Inc VAT

Sugihara 16″ Pro Solid Sugihara 18″ Light Type Pro

.325 .063 – 66 drive links .325 .058 – 72 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar with long lasting performance in all conditions. Sprocket nose is sections removed and replaced with a rigid light weight resin. replaceable. Superb durability, stiffness and wear characteristics One of the best guide bars in the world today Sugihara Light Type this is the benchmark Sugihara bar. bars are the most popular version amongst tree professionals. Part Number BC3T-8J40-A Weight 915g Part Number BC3U-8J45-A Weight 775g GROUP 3 DOLMAR 18″ GUIDE BARS 47

£66.00 Ex VAT £66.00 Ex VAT £79.20 Inc VAT £79.20 Inc VAT

Sugihara 18″ Light Type Pro Sugihara 18″ Light Type Pro

.325 .063 – 72 drive links 3/8″ .058 – 68 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. One sections removed and replaced with a rigid light weight resin. One of the best guide bars in the world today Sugihara Light Type bars of the best guide bars in the world today Sugihara Light Type bars are the most popular version amongst tree professionals. This is are the most popular version amongst tree professionals. This the .063 version – please note! Enables you to run the same chain version allows you to run 3/8 .058 chain (usually the standard set (.325 .063) on both Stihl and Husky saws. up is .325 .058). Part Number BC3U-3J45-A Weight 800g Part Number VH2U-8Q45-A Weight 945g

£32.00 Ex VAT £32.00 Ex VAT £38.40 Inc VAT £38.40 Inc VAT

Sugihara 18″ Pro Laminated Sugihara 18″ Pro Laminated

.325 .050 – 72 drive links .325 .058 – 72 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. These bars have been designed to Rollamatic chainsaw bars. They have a sandwich construction run Oregon 95TXL chain. This chain cuts a narrower kerf, similar with two pieces of steel welded together and the internal space to a 3/8″ Lo Pro chain, but is still on a .325 chassis so it is not filled with a punched blank. These bars are similar to Oregon Pro necessary to change the drive sprocket. 10 tooth nose sprocket Lite and Pro Am and Stihl Rollamatic chainsaw bars. for more control and better boring. Part Number BC2M-8J45-A Weight 815g Part Number BC2M-0H45P-A Weight 650g

£32.00 Ex VAT £32.00 Ex VAT £38.40 Inc VAT £38.40 Inc VAT

Sugihara 18″ Pro Laminated Sugihara 18″ Pro Laminated

.325 .063 – 72 drive links 3/8 Lo Pro .050 – 66 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl These bars are similar to Oregon Pro Lite and Pro Am and Stihl Rollamatic chainsaw bars. They have a sandwich construction Rollamatic chainsaw bars. A sandwich construction with two with two pieces of steel welded together and the internal space pieces of steel welded together and the internal space filled with a filled with a punched blank. These bars are similar to Oregon Pro punched blank. These bars run 3/8″ Lo Pro .050 chain and enable Lite and Pro Am and Stihl Rollamatic chainsaw bars. A sandwich you to cut faster on all Group 3 chainsaws. Not recommended for construction with two pieces of steel welded together and the Husky 560XP as the power of this saw and the way that power is internal space filled with a punched blank. delivered could more likely cause chain fracture. Part Number BC2M-3J45-A Weight 865g Part Number BC2M-0L46-A Weight 685g GROUP 3 DOLMAR 18 – 25″ GUIDE BARS 48

£32.00 Ex VAT £62.00 Ex VAT £38.40 Inc VAT £74.40 Inc VAT

Sugihara 18″ Pro Laminated Sugihara 18″ Pro Solid

3/8″ .058 – 68 drive links .325 .058 – 72 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar Rollamatic chainsaw bars. A sandwich construction with two for long lasting performance in all conditions. Sprocket pieces of steel welded together and the internal space filled with nose is replaceable. Superb durability, stiffness and wear a punched blank. This version allows you to run 3/8 .058 chain characteristics this is the benchmark Sugihara bar. (usually the standard set up is .325 .058). Part Number BC3T-8J45-A Weight 940g Part Number VH2M-8Q45-A Weight 985g

£62.00 Ex VAT £65.00 Ex VAT £74.40 Inc VAT £78.00 Inc VAT

Sugihara 18″ Pro Solid Sugihara 20″ Light Type Pro

3/8″ .058 – 68 drive links .325 .058 80 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar with long lasting performance in all conditions. Sprocket nose is sections removed and replaced with a rigid light weight resin. One replaceable. Superb durability, stiffness and wear characteristics of the best guide bars in the world today Sugihara Light Type bars this is the benchmark Sugihara bar. This version allows you to run are the most popular version amongst tree professionals. 3/8 .058 chain (usually the standard set up is .325 .058). Part Number BC3U-8J50-A Weight 855g Part Number VH2T-8Q45-A Weight 1125g

£36.00 Ex VAT £82.00 Ex VAT £43.20 Inc VAT £98.40 Inc VAT

Sugihara 20″ Pro Laminated Sugihara 25″ Pro Solid

3/8 Lo Pro .050 – 72 drive links .325 .058 92 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar for Rollamatic chainsaw bars. A sandwich construction with two long lasting performance in all conditions. Sprocket nose is pieces of steel welded together and the internal space filled with a replaceable. Superb durability, stiffness and wear characteristics punched blank. These bars run 3/8″ Lo Pro .050 chain and enable this is the benchmark Sugihara bar. you to cut faster on all Group 3 chainsaws. Not recommended for Part Number BC3T-8J63-A Weight 1340g Husky 560XP as the power of this saw and the way that power is delivered could more likely cause chain fracture. Part Number BC2M-0L51-A Weight 780g GROUP 3 DOLMAR 25″ GUIDE BARS 49

£87.00 Ex VAT £104.40 Inc VAT

Sugihara 25″ Light Type Pro

.325 .058 – 92 drive links Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. One of the best guide bars in the world today Sugihara Light Type bars are the most popular version amongst tree professionals. Part Number BC3U-8J63-A Weight 1120g

£00.00 Ex VAT GROUP 4 DOLMAR 15 – 16″ GUIDE BARS £00.00 Inc VAT

£60.00 Ex VAT GROUP 4 £72.00 Inc VAT Chainsaw model PS6400, PS7310 PS7910 PS9010 (with 9mm studs) Sugihara 15″ Light Type Pro

3/8″ .058 – 56 drive links Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. One of the best guide bars in the world today Sugihara Light Type bars are the most popular version amongst tree professionals. Part Number VT3U-8Q37-A Weight 790g

£29.00 Ex VAT £66.00 Ex VAT £34.80 Inc VAT £79.20 Inc VAT

Sugihara 15″ Pro Laminated Sugihara 16″ Light Type Pro

3/8″ .058 – 56 drive links 3/8″ .058 – 60 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar with Rollamatic chainsaw bars. A sandwich construction with two sections removed and replaced with a rigid light weight resin. One pieces of steel welded together and the internal space filled with of the best guide bars in the world today Sugihara Light Type bars a punched blank. are the most popular version amongst tree professionals. Part Number VT2L-8Q36-A Weight 770g Part Number VT3U-8Q40-A Weight 860g GROUP 4 DOLMAR 16 – 20″ GUIDE BARS 50

£30.00 Ex VAT £69.00 Ex VAT £36.00 Inc VAT £82.80 Inc VAT

Sugihara 16″ Pro Laminated Sugihara 18″ Light Type Pro

3/8″ .058 – 60 drive links .325 .050 – 64 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar with Rollamatic chainsaw bars. A sandwich construction with two sections removed and replaced with a rigid light weight resin. pieces of steel welded together and the internal space filled One of the best guide bars in the world today Sugihara Light Type with a punched blank. bars are the most popular version amongst tree professionals. Part Number VT2L-8Q40-A Weight 850g Part Number VT3U-8Q45-A Weight 970g

£32.00 Ex VAT £62.00 Ex VAT £38.40 Inc VAT £74.40 Inc VAT

Sugihara 18″ Pro Laminated Sugihara 18″ Pro Solid

3/8″ .058 – 68 drive links 3/8″ .058 – 68 drive links These bars are similar to Oregon Pro Lite and Pro Am and Stihl Sugihara single piece steel professional sprocket nose bar for Rollamatic chainsaw bars. A sandwich construction with two long lasting performance in all conditions. Sprocket nose is pieces of steel welded together and the internal space filled with replaceable. Superb durability, stiffness and wear characteristics a punched blank. this is the benchmark Sugihara bar. Part Number VT2M-8Q45-A Weight 1025g Part Number VT3T-8Q45-A Weight 1145g

£73.00 Ex VAT £36.00 Ex VAT £87.60 Inc VAT £43.20 Inc VAT

Sugihara 20″ Light Type Pro Sugihara 20″ Pro Laminated

3/8″ .058 – 72 drive links 3/8″ .058 – 72 drive links Sugihara single piece steel professional sprocket nose bar with These bars are similar to Oregon Pro Lite and Pro Am and Stihl sections removed and replaced with a rigid light weight resin. One Rollamatic chainsaw bars. A sandwich construction with two of the best guide bars in the world today Sugihara Light Type bars pieces of steel welded together and the internal space filled with are the most popular version amongst tree professionals. a punched blank. Part Number VT3U-8Q50-A Weight 1050g Part Number VT2M-8Q50-A Weight 1110g GROUP 4 DOLMAR 20 – 30″ GUIDE BARS 51

£68.00 Ex VAT £87.00 Ex VAT £81.60 Inc VAT £104.40 Inc VAT

Sugihara 20″ Pro Solid Sugihara 24″ Light Type Pro

3/8″ .058 – 72 drive links 3/8″ .058 – 84 drive links Sugihara single piece steel professional sprocket nose bar Sugihara single piece steel professional sprocket nose bar with for long lasting performance in all conditions. Sprocket sections removed and replaced with a rigid light weight resin. nose is replaceable. Superb durability, stiffness and wear One of the best guide bars in the world today Sugihara Light Type characteristics this is the benchmark Sugihara bar. bars are the most popular version amongst tree professionals. Part Number VT3T-8Q50-A Weight 1235g Part Number VT3U-8Q62-A Weight 1305g

£82.00 Ex VAT £98.00 Ex VAT £98.40 Inc VAT £117.60 Inc VAT

Sugihara 25″ Pro Solid Sugihara 28″ Light Type Pro

3/8″ .058 84 drive links 3/8″ .058 – 92 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar with long lasting performance in all conditions. Sprocket nose is sections removed and replaced with a rigid light weight resin. One replaceable. Superb durability, stiffness and wear characteristics of the best guide bars in the world today Sugihara Light Type bars this is the benchmark Sugihara bar. are the most popular version amongst tree professionals. Part Number VT3T-8Q62-A Weight 1540g Part Number VT3U-8Q70-A Weight 1495g

£93.00 Ex VAT £107.00 Ex VAT £111.60 Inc VAT £128.40 Inc VAT

Sugihara 28″ Pro Solid Sugihara 30″ Light Type Pro

3/8″ .058 – 92 drive links 3/8″ .058 102 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar with long lasting performance in all conditions. Sprocket nose is sections removed and replaced with a rigid light weight resin. replaceable. Superb durability, stiffness and wear characteristics One of the best guide bars in the world today Sugihara Light Type this is the benchmark Sugihara bar. bars are the most popular version amongst tree professionals. Part Number VT3T-8Q70-A Weight 1720g Part Number VT2U-8Q77-A Weight 1790g GROUP 4 DOLMAR 36 – 42″ GUIDE BARS 52

£131.00 Ex VAT £131.00 Ex VAT £157.20 Inc VAT £157.20 Inc VAT

Sugihara 36″ Light Type Pro Sugihara 36″ Light Type Pro

.404 .063 – 104 drive links 3/8″ .063 – 115 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. sections removed and replaced with a rigid light weight resin. One of the best guide bars in the world today Sugihara Light Type One of the best guide bars in the world today Sugihara Light Type bars are the most popular version amongst tree professionals. bars are the most popular version amongst tree professionals. This bar has a smaller radius nose to reduce kickback. Part Number VT2U-3Q91-A Weight 2000g Part Number VF2U-3S90-A Weight 2000g

£120.00 Ex VAT £120.00 Ex VAT £144.00 Inc VAT £144.00 Inc VAT

Sugihara 36″ Pro Solid Sugihara 36″ Pro Solid

.404 .063 – 104 drive links 3/8″ .063 – 115 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar for long lasting performance in all conditions. Sprocket nose is long lasting performance in all conditions. Sprocket nose is replaceable. Superb durability, stiffness and wear characteristics replaceable. Superb durability, stiffness and wear characteristics this is the benchmark Sugihara bar. this is the benchmark Sugihara bar. Part Number VF2T-3S90-A Weight 2000g Part Number VT2T-3Q91-A Weight 2000g

£153.00 Ex VAT £153.00 Ex VAT £183.60 Inc VAT £183.60 Inc VAT

Sugihara 42″ Pro Solid Sugihara 42″ Pro Solid

.404 .063 124 drive links 3/8″ .063 – 137 drive links Sugihara single piece steel professional sprocket nose bar for Sugihara single piece steel professional sprocket nose bar for long lasting performance in all conditions. Sprocket nose is long lasting performance in all conditions. Sprocket nose is replaceable. Superb durability, stiffness and wear characteristics replaceable. Superb durability, stiffness and wear characteristics this is the benchmark Sugihara bar. this is the benchmark Sugihara bar. Part Number VF2T-3S105-A Weight 3000g Part Number VT2T-3Q105-A Weight 3000g GROUP 4 DOLMAR 46″ GUIDE BARS GROUP 5 DOLMAR 28 – 36″ 53

£199.00 Ex VAT GROUP 5 £238.80 Inc VAT Chainsaw model 133, 153, 166, PS 9010 (standard 14mm studs) Sugihara 46″ Pro Solid

.404 .063 – 132 drive links Sugihara single piece steel professional sprocket nose bar for long lasting performance in all conditions. Sprocket nose is replaceable. Superb durability, stiffness and wear characteristics this is the benchmark Sugihara bar. Part Number VF2T-3S115-A Weight 3000g

£100.00 Ex VAT £84.00 Ex VAT £120.00 Inc VAT £100.80 Inc VAT

Sugihara 28″ Light Type Pro Sugihara 28″ Pro Solid

3/8″ .063 – 92 drive links 3/8″ .063 – 92 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar for sections removed and replaced with a rigid light weight resin. One long lasting performance in all conditions. Sprocket nose is of the best guide bars in the world today Sugihara Light Type bars replaceable. Superb durability, stiffness and wear characteristics are the most popular version amongst tree professionals. this is the benchmark Sugihara bar. Part Number DR2U-3Q70-A Weight 1615g Part Number DR2T-3Q70-A Weight 1850g

£131.00 Ex VAT £108.00 Ex VAT £157.20 Inc VAT £129.60 Inc VAT

Sugihara 36″ Light Type Pro Sugihara 36″ Pro Solid

3/8″ .063 – 115 drive links 3/8″ .063 – 115 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar for sections removed and replaced with a rigid light weight resin. long lasting performance in all conditions. Sprocket nose is One of the best guide bars in the world today Sugihara Light Type replaceable. Superb durability, stiffness and wear characteristics bars are the most popular version amongst tree professionals. this is the benchmark Sugihara bar. Part Number DR2U-3Q87-A Weight 2250g Part Number DR2T-3Q87-A Weight 2000g FIND YOUR MULTI MOUNT CHAINSAW MODELS – GROUP 1 54

STIHL HUSQVARANA Ground chainsaw model Chainsaw model 009, 010, 011, 012 16, 33, 34, 35, 36, 37, 38, 41 017, MS170, MS171 135, 136, 137, 235, 236 018, MS180, MS181 315, 316, 318, 320, 321, 333 019, MS190, MS191, MS192, MS193 334, 335, 336, 338 020, MS200, MS201 335XPT, 338XPT 021, 022, MS210, MS211, MS231 540XP

Top handled chainsaw model Oregon A095 MS150T Cannon N/A 019T, MS190T, MS191T MS192T, MS193T Top handled chainsaw model 020T, MS200T, MS201T T540XP, T335XPT, T338XPT, T536Li

Pole chainsaw model Pole chainsaw model HT70, HT75, HT100, HT101, HT130, HT131 327P4, 327PT5S

Electric chainsaw model Electric chainsaw model E140, E160, E180 321 EL MSE140, MSE160, MSE180, MSE200 Cannon bar code (starts) C1 Oregon bar code (ends) A074 Stihl bar code (starts) 3005 Sugihara bar code (starts) SL2

ECHO DOLMAR Chainsaw model Chainsaw model CS280WES, CS280TES, CS310ES PS222TH, PS3410TH CS352ES, CS360WES PS32C, PS35C CS280, CS290, CS300, CS300EVL, CS301, CS302 PS3410, PS350FC, PS420C CS315, CS330, CS330EVL, CS340, CS341, CS345 CS346, CS351, CS360, CS3000, CS3350 CS3400, CS3450 CS370ES

BL1, BL2 and EM1 Oregon ends K041 GROUP 1 MULTI MOUNT 10 – 14″ GUIDE BARS 55

£45.00 Ex VAT £49.00 Ex VAT £54.00 Inc VAT £58.80 Inc VAT

Sugihara 10″ Light Type Pro Sugihara 12″ Light Type Pro

1/4″ .050 – 60 drive links 1/4″ .050 – 68 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. sections removed and replaced with a rigid light weight resin. This bar has a smaller radius nose to reduce kickback. Small This bar has a smaller radius nose to reduce kickback. Small Sugi Sugi multi mount similar to carving bars means this bar will fit multi mount similar to carving bars means this bar will fit on virtually on virtually any small chainsaw under 50cc. any small chainsaw under 50cc. Part Number BN6U-0F25-A Weight 365g Part Number BN6U-0F30-A Weight 420g

£49.00 Ex VAT £49.00 Ex VAT £58.80 Inc VAT £58.80 Inc VAT

Sugihara 12″ Light Type Pro Sugihara 12″ Light Type Pro

3/8 Lo Pro .050 – 44 drive links 3/8″ Lo Pro .043 – 44 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. sections removed and replaced with a rigid light weight resin. This bar has a smaller radius nose to reduce kickback. Small This bar has a smaller radius nose to reduce kickback. Small Sugi multi mount similar to carving bars means this bar will fit on Sugi multi mount similar to carving bars means this bar will fit on virtually any small chainsaw under 50cc. virtually any small chainsaw under 50cc. Runs narrow kerf 3/8 Lo Pro .043 chain for very fast smooth cutting. Part Number BN6U-0N30-A Weight 380g Part Number BN6U-4N30-A Weight 320g

£54.00 Ex VAT £54.00 Ex VAT £64.80 Inc VAT £64.80 Inc VAT

Sugihara 14″ Light Type Pro Sugihara 14″ Light Type Pro

1/4″ .050 – 76 drive links 3/8 Lo Pro .050 – 50 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. sections removed and replaced with a rigid light weight resin. This bar has a smaller radius nose to reduce kickback. Small This bar has a smaller radius nose to reduce kickback. Small Sugi multi mount similar to carving bars means this bar will fit on Sugi multi mount similar to carving bars means this bar will fit on virtually any small chainsaw under 50cc. virtually any small chainsaw under 50cc. Part Number BN6U-0F35-A Weight 415g Part Number BN6U-0N35-A Weight 450g GROUP 1 MULTI MOUNT 14 – 18″ GUIDE BARS 56

£54.00 Ex VAT £58.00 Ex VAT £64.80 Inc VAT £69.60 Inc VAT

Sugihara 14″ Light Type Pro Sugihara 16″ Light Type Pro

3/8″ Lo Pro .043 – 50 drive links 3/8 Lo Pro .050 – 55 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. This sections removed and replaced with a rigid light weight resin. bar has a smaller radius nose to reduce kickback. Small Sugi multi This bar has a smaller radius nose to reduce kickback. Small mount similar to carving bars means this bar will fit on virtually Sugi multi mount similar to carving bars means this bar will fit any small chainsaw under 50cc. Runs narrow kerf 3/8 Lo Pro .043 on virtually any small chainsaw under 50cc. chain for very fast smooth cutting. Part Number BN6U-0N40-A Weight 515g Part Number BN6U-4N35-A Weight 375g

£58.00 Ex VAT £63.00 Ex VAT £69.60 Inc VAT £75.60 Inc VAT

Sugihara 16″ Light Type Pro Sugihara 18″ Light Type Pro

3/8″ Lo Pro .043 – 55 drive links 3/8 Lo Pro .050 – 61 drive links Sugihara single piece steel professional sprocket nose bar with Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. sections removed and replaced with a rigid light weight resin. This bar has a smaller radius nose to reduce kickback. Small This bar has a smaller radius nose to reduce kickback. Small Sugi multi mount similar to carving bars means this bar will fit Sugi multi mount similar to carving bars means this bar will fit on on virtually any small chainsaw under 50cc. Runs narrow kerf 3/8 virtually any small chainsaw under 50cc. Lo Pro .043 chain for very fast smooth cutting. Part Number BN6U-0N45-A Weight 580g Part Number BN6U-4N40-A Weight 450g

£63.00 Ex VAT £75.60 Inc VAT

Sugihara 18″ Light Type Pro

3/8″ Lo Pro .043 – 61 drive links Sugihara single piece steel professional sprocket nose bar with sections removed and replaced with a rigid light weight resin. This bar has a smaller radius nose to reduce kickback. Small Sugi multi mount similar to carving bars means this bar will fit on virtually any small chainsaw under 50cc. Part Number BN6U-4N45-A Weight 505g MULTI MOUNT CHAINSAW MODELS – GROUP 4 57

STIHL HUSQVARANA Chainsaw model Chainsaw model 034, MS340, MS341 61, 64, 65, 66, 70, 77, 160, 162 036, MS360, MS361, MS362 163, 180, 181, 185, 260, 263, 266 038, MS380, MS381 268, 272, 280, 281, 285, 288, 298 039, MS390, MS391 365, 365XP, 371, 372XP, 380,385XP 041, 044, MS440, MS441 390XP, 394XP, 395XP 045, MS450, MS451 046, MS460, MS461 Husqvarana Group 4 chainsaws have the 048, 065, MS650, MS651 same mount as Group 3 but run 3/8″ .063 064, MS640, MS641 chain as standard. 066, MS660, MS661 Oregon ends D009 Electric chainsaws model Cannon H1 MSE220, E20

Stihl Group 4 chainsaws have the same mount as Group 3 but run 3/8″ .063 chain as standard.

Cannon bar code (starts) S1 Oregon bar code (ends) D025 Stihl bar code (starts) 3003 Sugihara bar code (starts) ST2

ECHO DOLMAR Chainsaw model Chainsaw model CS550, CS620SX PS6400, PS7310 CS680, CS8002 PS7910, PS9010 Oregon ends D176 (with 9mm studs) GROUP 4 MULTI MOUNT 15 – 28″ GUIDE BARS 58

£66.00 Ex VAT £66.00 Ex VAT £79.20 Inc VAT £79.20 Inc VAT

Sugihara 15″ Light Type Pro Sugihara 16″ Light Type Pro

3/8″ .063 – 56 drive links 3/8″ .063 – 60 drive links This multi mount SV bar will fit mid sized Stihl chainsaws This multi mount SV bar will fit mid sized Stihl chainsaws from the MS261 - MS661 (Oregon D025 mount), Husqvarna from the MS261 - MS661 (Oregon D025 mount), Husqvarna chainsaws from 365XP upwards (D009 mount) and large Echo chainsaws from 365XP upwards (D009 mount) and large Echo chainsaws (Oregon mount D176). For the Husqvarna and Echo chainsaws (Oregon mount D176). For Husqvarna and Echo chainsaws a bar adapter will be required. This bar will fit directly chainsaws a bar adapter will be required. This bar will fit directly onto Stihl saws. onto Stihl saws. Part Number SV2U-3Q36-A Weight 810g Part Number SV2U-3Q40-A Weight 875g

£75.00 Ex VAT £78.00 Ex VAT £90.00 Inc VAT £93.60 Inc VAT

Sugihara 18″ Light Type Pro Sugihara 20″ Light Type Pro

3/8″ .063 – 66 drive links 3/8″ .063 – 72 drive links This multi mount SV bar will fit mid sized Stihl chainsaws This multi mount SV bar will fit mid sized Stihl chainsaws from the from the MS261 - MS661 (Oregon D025 mount), Husqvarna MS261 - MS661 (Oregon D025 mount), Husqvarna chainsaws chainsaws from 365XP upwards (D009 mount) and large Echo from 365XP upwards (D009 mount) and large Echo chainsaws chainsaws (Oregon mount D176). For Husqvarna and Echo (Oregon mount D176). For Husqvarna and Echo chainsaws a bar chainsaws a bar adapter will be required. This bar will fit directly adapter will be required. This bar will fit directly onto Stihl saws. onto Stihl saws. Part Number SV2U-3Q50-A Weight 1065g Part Number SV2U-3Q45-A Weight 970g

£92.00 Ex VAT £103.00 Ex VAT £110.40 Inc VAT £156.00 Inc VAT

Sugihara 24″ Light Type Pro Sugihara 28″ Light Type Pro

3/8″ .063 – 84 drive links 3/8″ .063 – 91 drive links This multi mount SV bar will fit mid sized Stihl chainsaws from the This multi mount SV bar will fit mid sized Stihl chainsaws from MS261 - MS661 (Oregon D025 mount), Husqvarna chainsaws the MS261 -MS661 (Oregon D025 mount), Husqvarna chainsaws from 365XP upwards (D009 mount) and large Echo chainsaws from 365XP upwards (D009 mount) and large Echo chainsaws (Oregon mount D176). For Husqvarna and Echo chainsaws a bar (Oregon mount D176). For Husqvarna and Echo chainsaws a bar adapter will be required. This bar will fit directly onto Stihl saws. adapter will be required. This bar will fit directly onto Stihl saws. Part Number SV2U-3Q63-A Weight 1370g Part Number SV2U-3Q70-A Weight 1550g GROUP 4 MULTI MOUNT 14 – 18″ GUIDE BARS 59

£112.00 Ex VAT £136.00 Ex VAT £134.40 Inc VAT £163.20 Inc VAT

Sugihara 30″ Light Type Pro Sugihara 36″ Light Type Pro

3/8″ .063 – 98 drive links 3/8″ .063 – 114 drive links This multi mount SV bar will fit mid sized Stihl chainsaws This multi mount SV bar will fit mid sized Stihl chainsaws from the from the MS261 -MS661 (Oregon D025 mount), Husqvarna MS261 -MS661 (Oregon D025 mount), Husqvarna chainsaws from chainsaws from 365XP upwards (D009 mount) and large Echo 365XP upwards (D009 mount) and large Echo chainsaws (Oregon chainsaws (Oregon mount D176). For Husqvarna and Echo mount D176). For Husqvarna and Echo chainsaws a bar adapter will chainsaws a bar adapter will be required. This bar will fit directly be required. This bar will fit directly onto Stihl saws. onto Stihl saws. Part Number SV2U-3Q90-A Weight 2170g Part Number SV2U-3Q76-A Weight 1780g

£169.00 Ex VAT £202.80 Inc VAT

Sugihara 42″ Light Type Pro

3/8″ .063 – 132 drive links This multi mount SV bar will fit mid sized Stihl chainsaws from the MS261 -MS661 (Oregon D025 mount), Husqvarna chainsaws from 365XP upwards (D009 mount) and large Echo chainsaws (Oregon mount D176). For Husqvarna and Echo chainsaws a bar adapter will be required. This bar will fit directly onto Stihl saws. Part Number SV2U-3Q104-A Weight 2750g FIND YOUR CHAINSAW MODEL – CARVING BARS GROUP 0 STIHL 10 – 14″ 60

Chainsaw model MS150, MS150CE, MS150T MSA160, MSA160T

Stihl Group 0 chainsaws tend to run 1/4″ picco chain as standard.

£63.00 Ex VAT £72.00 Ex VAT £75.60 Inc VAT £86.40 Inc VAT

Sugihara 10″ Light Type Pro R7 Sugihara 12″ Pro Solid R7

1/4″ Picco .043 – 56 drive links 1/4 .043 – 68 drive links These very small tipped bars from Sugihara have a tip radius of Pro solid 12″ version of the smallest tip you can have – pro solid only 7mm hence the name R7 (Dime Tip bars are usually 9mm- body provides a stiffer and more durable bar. These very small tipped 10mm) and should only be used for very fine detailing work. Will bars from Sugihara have a tip radius of only 7mm hence the name R7 only run with 1/4″ .043 picco chain on saws less than 30cc. For (Dime Tip bars are usually 9mm-10mm) and should only be used for carvers who want the ultimate detail bar. very fine detailing work. Will only run with 1/4″ .043 picco chain on saws less than 30cc. For carvers who want the ultimate detail bar. Part Number SL2C-4P25-A Weight 195g Part Number BN6A-4P30-A Weight 292g

£67.00 Ex VAT £72.00 Ex VAT £80.40 Inc VAT £86.40 Inc VAT

Sugihara 12″ Light Type Pro R7 Sugihara 14″ Light Type Pro R7 1/4″ Lo Pro .043 – 64 drive links 1/4″ Lo Pro .043 – 76 drive links These very small tipped bars from Sugihara have a tip radius of These very small tipped bars from Sugihara have a tip radius of only 7mm hence the name R7 (Dime Tip bars are usually 9mm- only 7mm hence the name R7 (Dime Tip bars are usually 9mm- 10mm) and should only be used for very fine detailing work. Will 10mm) and should only be used for very fine detailing work. Will only run with 1/4″ .043 picco chain on saws less than 30cc. For only run with 1/4″ .043 picco chain on saws less than 30cc. For carvers who want the ultimate detail bar. carvers who want the ultimate detail bar. Part Number SL2C-4P30-A Weight 245g Part Number SL2C-4P37-A Weight 303g FIND YOUR CHAINSAW MODEL – CARVING BARS GROUP 1 & 2 STIHL, GROUP 1 HUSQVARNA, ECHO & DOLMAR 61

GROUP 1 STIHL GROUP 2 STIHL Ground chainsaw model Chainsaw model 009, 010, 011, 012, 017, MS170, MS171 023, MS230, MS231, 025, MS241, MS250, MS251 018, MS180, MS181, 019, MS190, MS191 MS192, MS193, 020, MS200, MS201 Stihl Group 2 chainsaws have the same 021, 022, MS210, MS211 mount as Group 1 chainsaws but tend to run a .325 .063 chain as standard hence Top handled chainsaw model listing them as Group 2. MS150T 019T, MS190T, MS191T Cannon bar code (starts) S1 MS192T, MS193T Oregon bar code (ends) A074 020T, MS200T, MS201T Stihl bar code (starts) 3005 Sugihara bar code (starts) SL2 Pole chainsaw model HT70, HT75, HT100, HT101, HT130, HT131

Electric chainsaw model GROUP 1 ECHO E140, E160, E180, MSE140, MSE160 MSE180, MSE200 Chainsaw model Cannon bar code (starts) C1 CS280EG, Oregon bar code (ends) A074 CS310ES, CS352ES, CS370ES Stihl bar code (starts) 3005 CS281WES, CS360WES, CS361WES Sugihara bar code (starts) SL2 CS280TES, CS360TES CS280, CS290, CS300, CS301, CS302, CS305 CS315, CS328, CS330, CS340, CS341, CS345, CS346, CS350, CS351, CS360, CS370, CS2600 GROUP 1 HUSQVARNA CS2700, CS2800, CS2900, CS3000, CS3050 Chainsaw model CS3350, CS3400, CS3450, CS3500, CS4400 16, 33, 34, 35, 36, 37, 38, 41 CS280EVL, CS285EVL, CS290EVL, CS300EVL 135, 136, 137, 235, 236 CS320EVL, CS330EVL, CS330EVL, CS360EVL 315, 316, 318, 320, 321, 333 CS304VL, CS351VL, CS280EG, S2600ESC 334, 335, 336, 338 CS260TSEC, CS285EL, CS270E, CS280E 335XPT, 338XPT E155, ECS150, ESC1850FT, S2000 540XP Sugi Mount BL1, BL2 and EM1 Oregon A095 Oregon ends A041 Cannon N/A

Top handled chainsaw model GROUP 1 DOLMAR T540XP, T335XPT, T338XPT, T536Li Chainsaw model PS222TH, PS3410TH Pole chainsaw model PS32C, PS35C 327P4, 327PT5S PS3410, PS350FC, PS420C

Electric chainsaw model 321 EL 8 – 12″ CARVING GUIDE BARS GROUP 1 & 2 STIHL, GROUP 1 HUSQVARNA, ECHO & DOLMAR 62

£52.00 Ex VAT £63.00 Ex VAT £62.40 Inc VAT £75.60 Inc VAT

Sugihara 8″ Light Type Pro Dime Tip Sugihara 10″ Light Type Pro R7

1/4″ .050 – 52 drive links 1/4″ Picco .043 – 56 drive links Sugihara Light Type Pro carving bars are the lightest carving bars These very small tipped bars from Sugihara have a tip radius of in the world. The hard wearing stellite tip is welded and finished only 7mm hence the name R7 (Dime Tip bars are usually 9mm- by hand on every bar. For Dime Tip bars only 1/4 pitch chain may 10mm) and should only be used for very fine detailing work. Will be used. These Dime Tip bars have a nose radius of 9mm. only run with 1/4″ .043 picco chain on saws less than 30cc. For carvers who want the ultimate detail bar. Part Number BN6C-0X20-A Weight 200g Part Number SL2C-4P25-A Weight 195g

£54.00 Ex VAT £63.00 Ex VAT £64.80 Inc VAT £75.60 Inc VAT

Sugihara 10″ Light Type Pro Quarter Tip Sugihara 10″ Light Type Pro R7

3/8″ Lo Pro .050 – 40 drive links 1/4 .043 – 60 drive links Sugihara Light Type Pro carving bars are the lightest carving bars These very small tipped bars from Sugihara have a tip radius of in the world. The hard wearing stellite tip is welded and finished only 7mm hence the name R7 (Dime Tip bars are usually 9mm- by hand on every bar. These Quarter Tip bars have a nose radius 10mm) and should only be used for very fine detailing work. Will of 12.5mm. Runs 3/8 Lo Pro chain and has universal bar mount. only run with 1/4″ .043 picco chain on saws less than 30cc. For This means it will fit any small chainsaw and usually no need to carvers who want the ultimate detail bar. change the drive sprocket. Part Number BN6C-4P25-A Weight 210g Part Number BN6C-0Y25-A Weight 310g

£67.00 Ex VAT £56.00 Ex VAT £80.40 Inc VAT £67.20 Inc VAT

Sugihara 12″ Light Type Pro R7 Sugihara 12″ Light Type Pro Dime Tip 1/4″ Lo Pro .043 – 64 drive links 1/4″ .050 – 68 drive links These very small tipped bars from Sugihara have a tip radius of Sugihara Light Type Pro carving bars are the lightest carving bars only 7mm hence the name R7 (Dime Tip bars are usually 9mm- in the world. The hard wearing stellite tip is welded and finished 10mm) and should only be used for very fine detailing work. Will by hand on every bar. For Dime Tip bars only 1/4 pitch chain may only run with 1/4″ .043 picco chain on saws less than 30cc. For be used. These Dime Tip bars have a nose radius of 9mm. carvers who want the ultimate detail bar. Part Number BN6C-0X30-A Weight 315g Part Number SL2C-4P30-A Weight 245g 8 – 12″ CARVING GUIDE BARS 12 – 14″ CARVING GUIDE BARS GROUP 1 & 2 STIHL, GROUP 1 HUSQVARNA, ECHO & DOLMAR GROUP 1 & 2 STIHL, GROUP 1 HUSQVARNA, ECHO & DOLMAR 63

£72.00 Ex VAT £72.00 Ex VAT £86.40 Inc VAT £86.40 Inc VAT

Sugihara 12″ Pro Solid R7 Sugihara 12″ Pro Solid Dime Tip Tough Carver

1/4 .043 – 68 drive links 1/4″ .050 – 68 drive links Pro solid 12″ version of the smallest tip you can have – pro solid Part of the new Sugihara tough carving range – thicker tougher body provides a stiffer and more durable bar. These very small tipped carving bar which will withstand higher heat and harder handling. bars from Sugihara have a tip radius of only 7mm hence the name R7 Heavier than the equivalent Light Type version. Hard wearing (Dime Tip bars are usually 9mm-10mm) and should only be used for stellite tip is welded and finished by hand on every bar. For Dime very fine detailing work. Will only run with 1/4″ .043 picco chain on Tip bars only 1/4 pitch chain may be used. These Dime Tip bars saws less than 30cc. For carvers who want the ultimate detail bar. have a nose radius of 9mm. Part Number BN6A-4P30-A Weight 292g Part Number BN6A-OX30T-A Weight 435g

£72.00 Ex VAT £72.00 Ex VAT £86.40 Inc VAT £86.40 Inc VAT

Sugihara 12″ Pro Solid Quarter Tip Tough Carver Sugihara 14″ Light Type Pro R7

3/8 Lo Pro .050 – 45 drive links 1/4″ Lo Pro .043 – 76 drive links Part of the new Sugihara tough carving range – thicker tougher These very small tipped bars from Sugihara have a tip radius of carving bar which will withstand higher heat and harder handling. only 7mm hence the name R7 (Dime Tip bars are usually 9mm- Heavier than the equivalent Light Type version. Hard wearing 10mm) and should only be used for very fine detailing work. Will stellite tip is welded and finished by hand on every bar. Quarter only run with 1/4″ .043 picco chain on saws less than 30cc. For Tip bars can run 1/4 or 3/8 Lo Pro chain. For 1/4 chain this bar carvers who want the ultimate detail bar. runs 1/4 .050 68 drive links go to the Custom chain loop Stihl 1/4 Part Number SL2C-4P37-A Weight 303g carving chain to buy. Part Number BN6A-0Y28T-AL Weight 500g

£74.00 Ex VAT £58.00 Ex VAT £88.80 Inc VAT £69.60 Inc VAT

Sugihara 14″ Pro Solid Quarter Tip Tough Carver Sugihara 14″ Light Type Pro Dime Tip

3/8 Lo Pro .050 – 53 drive links 1/4″ .050 – 76 drive links Part of the new Sugihara tough carving range – thicker tougher Sugihara Light Type Pro carving bars are the lightest carving bars carving bar which will withstand higher heat and harder handling. in the world. The hard wearing stellite tip is welded and finished Heavier than the equivalent Light Type version. Hard wearing by hand on every bar. For Dime Tip bars only 1/4 pitch chain may stellite tip is welded and finished by hand on every bar. Quarter be used. These Dime Tip bars have a nose radius of 9mm. Tip bars can run 1/4 or 3/8 Lo Pro chain. For 1/4 chain this bar Part Number BN6C-0X35-A Weight 365g runs 1/4 .050 76 drive links go to the Custom chain loop Stihl 1/4 carving chain to buy. Part Number BN6C-0Y35T-AL Weight 625g 14 – 16″ CARVING GUIDE BARS GROUP 1 & 2 STIHL, GROUP 1 HUSQVARNA, ECHO & DOLMAR 64

£72.00 Ex VAT £86.40 Inc VAT

Sugihara 14″ Light Type Pro R7

1/4 .043 – 76 drive links These very small tipped bars from Sugihara have a tip radius of only 7mm hence the name R7 (Dime Tip bars are usually 9mm- 10mm) and should only be used for very fine detailing work. Will only run with 1/4″ .043 picco chain on saws less than 30cc. For carvers who want the ultimate detail bar. Part Number BN6C-4P35-A Weight 310g

GROUP 3 STIHL 18 – 20″ CARVING BARS

Chainsaw model Cannon bar code (starts) S1 024, MS240, 026, MS260, MS261 Oregon bar code (ends) D025 027, MS270, MS271, 028, MS280 Stihl bar code (starts) 3003 MS281, 029, MS290, MS291 Sugihara bar code (starts) ST2

Stihl Group 3 chainsaw share the same mount as Group 4 but run .325 .063 chain as standard.

£62.00 Ex VAT £73.00 Ex VAT £74.40 Inc VAT £87.60 Inc VAT

Sugihara 18″ Light Type Pro Toonie Tip Sugihara 20″ Light Type Pro – Quarter Tip

3/8″ Lo Pro .050 – 64 drive links OR 3/8″ Lo Pro .050 – 72 drive links OR .325 .050 – 72 drive links .325 .050 – 80 drive links Sugihara single piece pro bar with lightweight variation. Sections Sugihara single piece pro bar with lightweight variation. Superb have been laser cut and filled with rigid lightweight resin. Superb balance and longer narrower bar body for better reach with balance, durability and stellite toonie tip for control. Toonie tip Quarter Tip nose to reduce kickback to a minimum. For maximum bars have a nose radius of 20mm.For maximum versatility this bar versatility this bar has been designed so you can run either 325 has been designed so you can run either 325 .050 Oregon 95TXL .050 Oregon 95TXL 80 drive links OR 3/8″ Lo Pro .050 72 drive 80 drive links OR 3/8″ Lo Pro .050 72 drive links. links. Quarter Tip bars have a nose radius of 13mm. Part Number ST2C-0A45P-A Weight 710g Part Number ST2C-0R50-A Weight 770g 14 – 16″ CARVING GUIDE BARS GROUP 1 & 2 STIHL, GROUP 1 HUSQVARNA, ECHO & DOLMAR GROUP 3 HUSQVARNA & DOLMAR 18 – 20″ CARVING BARS 65

GROUP 3 – HUSQVARNA GROUP 3 – DOLMAR Chainsaw model Chainsaw model 39, 40, 42, 44, 45, 49, 50, 51, 55, 57, 133, 134 PS460, PS4605C, PS500 142, 154, 234, 235, 238, 240, 242, 246, 254, 257 PS5105C, 115, 261, 262, 339, 340, 345XP, 346XP, 350, 351, 353 116, PS6100 355, 357, 359, 360, 440e, 445e, 450e, 455, 460 550XP, 555XP, 560XP

Husqvarna Group 3 chainsaw tend to run .325 .058 chain as standard, but there are other options in the Sugihara range.

Oregon ends K095 Cannon C1

£62.00 Ex VAT £73.00 Ex VAT £74.40 Inc VAT £87.60 Inc VAT

Sugihara 18″ Light Type Pro Toonie Tip Sugihara 20″ Light Type Pro Quarter Tip

3/8″ Lo Pro .050 – 72 drive links OR 3/8″ Lo Pro .050 – 72 drive links OR .325 .050 – 80 drive links .325 .050 – 80 drive links Sugihara single piece pro bar with lightweight variation. Sections Sugihara single piece pro bar with lightweight variation. Sections have been laser cut and filled with rigid lightweight resin. Superb have been laser cut and filled with rigid lightweight resin. Superb balance, durability and stellite toonie tip for control. Toonie tip balance and longer narrower bar body for better reach with bars have a nose radius of 20mm.For maximum versatility this bar Quarter Tip nose to reduce kickback to a minimum. For maximum has been designed so you can run either 325 .050 Oregon 95TXL versatility this bar has been designed so you can run either 325 80 drive links OR 3/8″ Lo Pro .050 72 drive links. .050 Oregon 95TXL 80 drive links OR 3/8″ Lo Pro .050 72 drive links. Quarter Tip bars have a nose radius of 13mm. Part Number BC3C-0A45-A Weight 665g Part Number BC3C-0A45-A Weight 770g GROUP 4 ECHO 18 – 20″ CARVING BARS 66

Chainsaw model 6702, 6800, CS60 CS8000, CS8001, CS8002 CS500EVL, CS510EVL, CS550EVL CS550, CS620SX, CS680 CS600EVL, CS650EVL, CS702EVL CS8000, CS8001, CS8002 CS451VL, CS452VL, CS500VL CS602VL, CS610VL, CS660VL, CS750VL Sugi starts XT2 CS5000, CS5500, CS5501, CS6700, CS6701 Oregon ends D176

£62.00 Ex VAT £73.00 Ex VAT £74.40 Inc VAT £87.60 Inc VAT

Sugihara 18″ Light Type Pro Toonie Tip Sugihara 20″ Light Type Pro Quarter Tip

3/8″ Lo Pro .050 – 72 drive links OR 3/8″ Lo Pro .050 72 drive links OR .325 .050 – 80 drive links .325 .050 80 drive links Sugihara single piece pro bar with lightweight variation. Sections Sugihara single piece pro bar with lightweight variation. Sections have been laser cut and filled with rigid lightweight resin. Superb have been laser cut and filled with rigid lightweight resin. Superb balance, durability and stellite toonie tip for control. Toonie tip balance and longer narrower bar body for better reach with bars have a nose radius of 20mm.For maximum versatility this bar Quarter Tip nose to reduce kickback to a minimum. For maximum has been designed so you can run either 325 .050 Oregon 95TXL versatility this bar has been designed so you can run either 325 80 drive links OR 3/8″ Lo Pro .050 72 drive links. .050 Oregon 95TXL 80 drive links OR 3/8″ Lo Pro .050 72 drive links. Quarter Tip bars have a nose radius of 13mm. Part Number XT2C-0A45-A Weight 675g Part Number XT2C-0R50-A Weight 770g

Sugihara chainsaw guide bars are distributed by Always Greener Ltd