Processor Enablement QorIQ Development Systems with COM Express® Modules Ease the “make vs. buy” decision for OEMs

Overview • Future-proof: QorIQ processors are part of Carrier Blade OEMs face increasing challenges in new Freescale’s Product Longevity Program— Freescale designed the carrier blade to product development­­­. These include ensuring a long life cycle. support the full family of COM Express diminishing hardware engineering resources, a modules based on QorIQ processors. COM Express Development System rise in processor complexity and the perpetual Additional development systems are planned Components demand for bringing solutions to market faster to support modules from the growing number The Freescale development systems provide and at a lower cost. Today, design decisions of QorIQ processors. The ATX form factor an I/O-rich carrier blade whose personality often include buying silicon and designing carrier blade accepts/supports compact comes from the QorIQ processor embedded a custom board around it, or personalizing (95 mm x 95 mm) and basic (95 mm x 125 mm) in a plug-in COM Express module. This an off-the-shelf board from a single-board COM Express board sizes through its COM module/carrier combination provides computing (SBC) vendor. Thankfully, SBC Express connectors. unparalleled development flexibility. vendors can ease these challenges by Carrier blade connectors and supported providing the engineering and manufacturing Each development system contains the functions include: expertise to jump start the OEM’s design. following: • One SD/MMC card connector • Hardware Freescale’s modular development systems • Two dual CAN connectors provide OEMs with yet more design decision o COM Express module with QorIQ • Five PCI Express® (PCIe) x4 connectors flexibility. Production-ready COM Express® processor and memory (Connector “A” through Connector “F”) compatible boards from Emerson Network o Carrier blade which could support up to four lanes of Power and Eurotech are designed around o Chassis enclosure PCIe 2.0/1.0, SGMII, Serial RapidIO® (sRIO) Freescale’s P4080, P2020, P1022 and o Universal bench ATX power supply and XAUI interconnects (depending on the P1021 QorIQ multicore communications o Cables (serial UART, USB, CAT5 Ethernet) processor used) processors. These development systems help o CodeWarrior USB TAP • Two PCIe x1 connectors (used as sideband eliminate the board-level design step from connectors for the PCIe x4 connectors) and the architecture decision process, easing the • Software one PCIe x1 connector used for TDM riser “make vs. buy” decision. o U-boot to support SLIC function o Linux® BSP from Mentor Graphics Features and Benefits of QorIQ Embedded • Eight USB 2.0 connectors Processors on COM Express Modules o GCC tools (compiler, debugger) • Four SATA II connectors • Off-the-shelf: Emerson and Eurotech take the o CodeWarrior evaluation copy • One DVI-I connector to support either complexity of designing with multicore processors digital DVI or analog VGA (via an • Documentation and provides production-ready solutions. adapter) connector o Quick start guide • Extended temperature range: Emerson and • Two TFT display connectors Eurotech QorIQ processor modules are o Design workbook • Two dual DB-9 RS-232 connectors suitable for industrial automation, medical, • Block diagram of hardware for UART networking, telecom and military applications. • Programming model • RS-485 can be added by adding an adapter • Embedded graphics: Integrated on-board • System configurations to the DB-9 RS-232 connector support for VGA and LVDS further simplifies o Linux OS and CodeWarrior tools manuals • Stereo audio jacks the design process while providing for human-machine interface (HMI) applications. • RJ-11 phone connectors can be added Development System and Module Development kits will be available from using TDM riser card into slot 5 and the Availability Freescale and our distribution partners. TDM riser sideband connector Freescale is currently offering three Emerson Network Power and Eurotech will • One dual RMII (100/10 MHz) connector, development systems for order at sell production quantities of the COM Express one dual and one single GMII (1 GHz) $1,499 USD per kit: modules through its distribution network, RJ-45 Ethernet connector • P4080COME-DS-PB including our mutual channel partners Avnet • 50-pin connector for IXXAT Industrial • P2020COME-DS-PB and Arrow. Ethernet module via SPI bus • P1022COME-DS-PB • Tamper detect circuitry to test P4080, • P1021COME-DS-PB P5020 and P3041 security mode Additional features COM Express® Modules • Standard barrel ATX power supply Manufacturer: COMX-P4080 COMX-P2020 COMX-P1022 — Emerson • Touch screen capabilities Manufacturer: Adbc7517 Adbc7519 — Adbc7520 • OS support from Green Hills, Mentor Eurotech Graphics, QNX and Wind River COM Express COM Express COM Express COM Express Form Factor Basic Compact Compact Compact • Supports IXXAT Industrial Ethernet (125 mm x 95 mm) (95 mm x 95 mm) (95 mm x 95 mm) (95 mm x 95 mm) module for evaluating industrial Processor P4080 @ 1.5 GHz P2020 @ 1.2 GHz P1022 @ 1.0 GHz P1021 @ 800 MHz communication protocols Number of 8 2 2 2 Cores COM Express Modules 4 GB DDR3 2 GB DDR3 2 GB DDR3 2 GB DDR3 Each module plugs onto the carrier blade to (DDR3 ECC (DDR3 ECC (DDR3 ECC (DDR3 ECC Memory SO-UDIMM) SO-UDIMM) SO-UDIMM) SO-UDIMM) provide embedded functions. All connections, MicroSD slot for MicroSD slot for MicroSD slot for MicroSD slot for including custom I/O, are via the carrier card. on-board storage on-board storage on-board storage on-board storage Inherently rugged pin and socket connections • 1x 1G with integrated PHY make these modules suitable for industrial • 4x SGMII port available via 3x 1G with 2x 1G with 2x 1G with Ethernet and military use. Off-the-shelf software helps SerDes links integrated PHY integrated PHY integrated PHY reduce cost and complexity. • 1x 10GE XAUI port available About the COM Express Standard via SerDes links 4x with integrated 4x with integrated 4x with integrated USB 2.0 4 COM Express is a PCI Industrial Computer PHY PHY PHY Manufacturers Group (PICMG) standard for 2x with flow 2x with flow 2x with flow UART 2 a computer-on-module (COM) form factor control control control 1x with 4 chip 1x with 4 chip 1x with 4 chip with PCI Express interconnects. Originally SPI 1 selects selects selects developed for X86 processors, the COM GPIO 8 8 8 8 Express specification supports the push I2C 4 2 4 4 toward high-speed serial interfaces and • Up to two sRIO supports more interfaces than PMC boards. v2 (x4) ports PCI Express® available via Freescale’s COM Express development kits (PCIe)/ SerDes links PCI (x2) + PCI (x2) + dual PCI (x2) + do not change any physical form factors of RapidIO • Up to two PCIe PCIe (x1) PCIe (x1) PCIe (x1) (sRIO) v2 (x4) ports the standard. However, Freescale has created available via a Power Architecture® friendly pinout for the SerDes links COM Express module that takes advantage of Graphics – VGA/LVDS VGA/LVDS VGA/LVDS our QorIQ system-on-chip (SoC) solutions. SATA 2.0 – – 2 – IEEE® 1588 Yes Yes Yes Yes QUICC Engine No No No Yes Technology

Learn More: For more information about QorIQ development systems with COM Express modules and the “make vs. buy” process, visit freescale.com/SBC.

Freescale, the Freescale logo and CodeWarrior are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. QorIQ and QUICC Engine are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org. © 2010, 2011 Freescale Semiconductor, Inc. Document Number: QCOMEFS REV 1