Section Cpgs2-2510/23/082:42PMPage1 C Tools and Totes Section C pgs 2-25 10/23/08 2:42 PM Page 2

Engineered to strip every wire right

Kinetic™ Reflex™ T®-Stripper Wire Stripper Ergonomic handles with Santoprene™ grip and Thumb Valley™ make this the premier wire stripper in the market.

Kinetic™ Super Wire Stripper • Thumb Valley™ The ergonomic design and patented Santoprene™ Protection grip wicks away perspiration and reduces • Pocket Locket muscle fatigue. The Thumb Valley™ guide and Locking Hasp precision stripping holes promote the highest • Shear Cut accuracy in the industry. Bolt Cutters • Santoprene™ ® Reflex™ Super T -Stripper Wire Stripper • Ergo Handles • Thumb Valley™ The ergonomic design with curved handles Protection reduces wrist fatigue. Features 6/32 and 8/32 • Pocket Locket self-chasing, bolt cutting holes and a locking Locking Hasp pawl for safe storage. • Shear Cut Bolt Cutters • Santoprene™ ® Reflex™ Premium T -Stripper Wire Stripper • Curved Designed for total-comfort and wire stripping. • Locking Pawl Handles Ergonomic handles fit an electrician’s natural • Bolt Cutting • Extended grip and reduces hand fatigue. Textured, slip- Textured resistant sleeves cushion thumb and fingers. Comfort • Ergo Handles Super T®-Stripper Wire Stripper • Extended ® Traditional T -Stripper Wire Stripper features with Textured the added convenience of bolt-cutting holes and • Ergo Handles locking pawl. Curved comfort-grip handles accommodate high-volume wire stripping.

T®-Stripper Wire Stripper The industry standard for almost 50 years. Compact, • Locking Pawl lightweight and easy to use. Features precision-ground, • Bolt Cutting knife-type blades, built-in looping holes, wire cutters • Comfort • Curved and a convenient plier nose. • Straight Handles Handles

T®-Stripper Wire Stripper Selection Guide Hole 6 8 10 12 14 16 18 20 22 24 26 28 30

Size #45-100’s #45-300’s #45-400’s #45-600’s #45-700’s #45-900’s 8 10 12 14 16 18 20 22 24 26 28 30 32 Solid 22 24 26 28 30

Stranded 45-125 45-317 45-417 — — — 24 26 28 30 32 Solid 14 16 18 20 22 24

Stranded 45-121 45-316 45-416 45-616 45-716 — 16 18 20 22 24 26 Solid 10 12 14 16 18

Stranded 45-120 — 45-415 — 45-715 45-915 12 14 16 18 20 Solid 8 10 12 14 16

Stranded — 45-315 — 45-615 — — 10 12 14 16 18 Solid 6 8 10 12 14

Stranded 45-124 45-318 45-418 45-618 45-718 45-918 8 10 1214 16 T ® -Cutter 45-123 — — — — —

Static Disp

C-2 www.idealindustries.com 1-800-435-0705 for Customer Service Section C pgs 2-25 10/23/08 2:43 PM Page 3

Tools and Totes

Kinetic™ Super Kinetic™ Reflex™ T®-Stripper Wire Strippers Wire Strippers

I Non-slip Santoprene™ textured grips I Plier nose for holding and twisting wires Slide lock for safety and storage I I Non-slip Santoprene™ textured grips and thumb rest Thumb and finger valley makes stripping easier I I Plier nose for holding and twisting wires and more accurate I Slide lock for safety and storage I “Shear-Cut™” bolt cutters I Thumb and finger valley makes stripping easier and more accurate I “Shear-Cut™” bolt cutters Description Solid Stranded Cat. No. ™ Description Solid Stranded Cat. No.

Kinetic Super Wire Stripper 10-18 12-20 45-715 Wire Strippers ® Kinetic Super™ Wire Stripper 14-24 16-26 45-716 Kinetic™ Reflex™ T -Stripper Wire Stripper 10-18 12-20 45-915 Kinetic Super™ Wire Stripper 6-14 8-16 45-718 Kinetic™ Reflex™ T®-Stripper Wire Stripper 6-14 8-16 45-918

Reflex™ Premium T®-Stripper Reflex™ Super T®-Stripper Wire Strippers Wire Strippers

I Ergonomic design for maximum comfort

I Curved handles reduce wrist fatigue I 6/32 and 8/32 self-chasing screw-cutting holes I Sleeves that extend to stripping head to cushion thumb and fingers I Locking pawl for safe storage I Textured, no-slip sleeves provide a sure, easy grip I Ergonomic design for maximum comfort Curved handles reduce wrist fatigue Description Solid Stranded Cat. No. I Reflex™ Premium T®-Stripper Wire Stripper 10-18 12-20 45-415 I Sleeves that extend to stripping head to cushion thumb and fingers Reflex™ Premium T®-Stripper Wire Stripper 14-24 16-26 45-416 I Textured sleeves with extra cushioning for added comfort Reflex™ Premium T®-Stripper Wire Stripper 22-30 24-32 45-417 Reflex™ Premium T®-Stripper Wire Stripper 6-14 8-16 45-418 Description Solid Stranded Cat. No. Reflex™ Premium T®-Stripper – Metric 0.5mm2-4.0mm2 45-425-341 Reflex™ Super T®-Stripper Wire Stripper 8-16 10-18 45-615 ® Reflex™ Super T®-Stripper Wire Stripper Reflex™ Premium T -Cutter Cutter 45-423 14-24 16-26 w/static dissipative grips 45-616 Reflex™ Super T®-Stripper Wire Stripper 8-14 8-16 45-618 Reflex™ Super 12/2 & 14/2 12-2 and — 45-621 NM Cable T®-Stripper Wire Stripper 14-2 Reflex™ Super 12/3 & 14/3 12-3 and — 45-622 NM Cable T®-Stripper Wire Stripper 14-3

1-800-435-0705 for Customer Service www.idealindustries.com C-3 Section C pgs 2-25 10/23/08 2:43 PM Page 4

Wire Preparation

T®-Stripper Wire Strippers Super T®-Stripper Wire Strippers I Form-ground, knife-type blades for I 6-32 and 8-32 self-chasing screw- accurate, easy stripping without cutting holes (not available nicking insulation on metric stripper) I Built-in wire cutter I Curved, cushion-grip and looping holes handles for ergonomic comfort I Convenient plier nose for extra gripping I Locking pawl to keep strength stripper in closed position I Laser-etched wire gauge for easy-to-read visibility I Built-in wire cutter and looping holes I Spring-loaded automatic opening I Convenient plier nose for extra gripping strength I Corrosion-resistant, black oxide finish

Wire Strippers I Laser-etched wire gauge for easy-to-read visibility I Tough steel construction I Spring-loaded automatic opening Description Solid Stranded Cat. No. I Tough steel construction, corrosion-resistant, black oxide finish T®-5 T®-Stripper Wire Stripper 10-18 12-20 45-120 Description Solid Stranded Cat. No. T®-6 T®-Stripper Wire Stripper 14-24 16-26 45-121 Super T®-5 T®-Stripper Wire Stripper 8-16 10-18 45-315 T®-7 T®-Stripper Wire Stripper 22-30 24-32 45-125 Super T®-8 T®-Stripper Wire Stripper 6-14 8-16 45-318 T®-8 T®-Stripper Wire Stripper 6-14 8-16 45-124 Super T®-Stripper Wire Stripper – Metric 0.5-4mm2 45-310-341 T®-Stripper Wire Stripper – Metric 0.75-6mm2 45-120-341 Super T®-Stripper Wire Stripper – Metric 0.75-6mm2 45-315-341 T®-Stripper Wire Stripper – Metric 0.5-4mm2 45-125-341 Super T®-Stripper Wire Stripper – Metric 0.5-4mm2 45-317-341

® NM Cable T -Stripper Wire Strippers Lil’ Ripper Stripper™ Easy, one-step stripping of outer jacket I I Rips Romex® outer jacket cleanly and of NM cable — no slitting required quickly Versatility to strip, cut and loop I Clips outer sheathing to remove excess Romex® jacket conductor wires with I precision and ease I Strips inner conduit wires I Stripping holes for I Looping holes loop wire for screw-on connections 12 or 14 AWG solid wire I Twist-Assist™ tightens most popular sizes of winged twist-on I Locking pawl for safe storage connectors I Injection molded elastomer grip provides a comfortable, slip Description Cat. No. resistant grip 14/2 NM Cable T®-Stripper Wire Stripper 45-248 Strip length measuring scale allows for quick and easy measurements 12/2 NM Cable T®-Stripper Wire Stripper 45-249 I Reflex™ Super 12/2 & 14/2 NM Cable T®-Stripper Wire Stripper 45-621 I Conveniently fits in your pocket Reflex™ Super 12/3 & 14/3 Cable T®-Stripper Wire Stripper 45-622 Description Cat. No. Lil’ Ripper Stripper™ 45-025 NM Cable Dual-Hole T®-Stripper Wire Stripper Reflex™ Super T®-Stripper Wire Strippers I Stripping holes for stripping two I 6/32 and 8/32 self-chasing screw-cutting holes 12 AWG or two 14 AWG wires I Locking pawl for safe storage simultaneously I Ergonomic design for I Ability to strip both maximum comfort conductor wires of NM cable at one time I Curved handles reduce wrist fatigue

Description Wire Range Cat. No. I Sleeves that extend to stripping head to cushion thumb and fingers Premium T®-14 T®-Stripper Wire Stripper 12 or 14 AWG solid 45-247 I Textured sleeves with extra cushioning for added comfort

Romex® is a registered trademark of Southwire. Description Solid Stranded Cat. No. Reflex™ Super 12/2 & 14/2 12-2 and — 45-621 NM Cable T®-Stripper Wire Stripper 14-2 Reflex™ Super 12/3 & 14/3 12-3 and — 45-622 NM Cable T®-Stripper Wire Stripper 14-3

C-4 www.idealindustries.com 1-800-435-0705 for Customer Service Section Cpgs2-2510/23/082:43PMPage5 V-Notch Stripper Static Dissipative Super T -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService I I I I I I I 7-in-1 Stripper I I I I I I Romex ecito Cat.No. Description ecito oi taddCat.No. Stranded Solid Description V-Notch Stripper 7-in-1 Stripper Description w/static dissipativegrips Super T w/static dissipativegrips Super T Gauges andloopswire Reams andde-burrsconduit Cuts stranded, solid,Romex and 1 Cuts unhardened wire, boltsandscrews (4-40,6-32,8-32,10-24 coax connectorsand7to8mmautoignition Crimps bar solidand10Strips 8–16 stranded –18 AWG wire AWG blades, cushionedgripsandpliernose V Locking pawltokeepstripperinclosedposition device) strap orothergrounding must begr operator totheground (operator static charge buildupthrough the Static dissipativ Locking hasp Looping holesfor solidwire wireto strip10-24 AWG Rotating camwheeladjusts solid orstranded Cuts copperoraluminumwire, ers ® ® ® is aregisteredtrademarkofSouthwire. atile, sev -7 T -6 T 0-32) andreforms threads ® ® -Stripper WireStripper -Stripper WireStripper ® e andinsulatedterminalsf ounded viawrist -Stripper Wire Strippers— en-function toolf e gripsfor dispersing ® and U.F. wire to8AWG eatures precision-ground stripping 23 24-32 16-26 22-30 14-24 or 1 0 –22AW G wir 45-101 45-777 e, RG-59 45-317 45-316 Cat. No. IDEAL Wire Stops Select bladewithcuttingdepthlessthaninsulationthickness. Ringer™ ShieldedCableStripper Replacement Blades I I I I I I ecito Cat.No. Description Description ecito ld oo Cat.No. Color Blade Description Teflon Slug Remover 2-1/2 in.to5 Up to2-1/2in. Kynar imtr pt .0i.separately separately separately sold diameters upto0.30in. sold Cable Stripper, w/“deepV”forcable 0.12 in.to0.22 sold Cable Stripper, Cablediametersfrom 0.12 in. Cable Stripper, Cablediametersupto includes blade Cable Stripper, 8-10Milinsulation, includes blade Cable Stripper, 5Milinsulation, .0090 in. .0080 in. .0070 in. .0060 in. .0044 in. .0030 in. utn utn Cutting Cutting Cutting et a.N.DphCt o et Cat. No. Depth Cat.No. Depth Cat.No. Depth clean cuts Wire guideroller maintainsstripping headalignment,for square, V-notch jawautomaticallypositionsandholdscable stripping Fixed bladesare sizedtoinsulation thickness,for accurate Heat-treated, stainless-steelblades resist wear Spring-loaded headprovides even tension extruded Teflon non-round cable,including P temperature insulations T efzel recision strippingfor most ® ® Gripper™ is aregisteredtrademarkofPennwall. and Kapton ® , K ynar K-6496 K-6495 K-6494 K-6493 K-6492 K-6491 ® Tools andTotes ® are registeredtrademarksofE.I.duPontde NemoursandCompany. and high- ® , Kapton .0160 in. .0140 in. .0130 in. .0120 in. .0110 in. .0100 in. ® , K-6502 K-6501 K-6500 K-6499 K-6498 K-6497 -43(Yellow) K-6493 (Orange) K-6492 .0250 in. .0220 in. .0200 in. .0180 in. (Green) (Blue) (Red) LB-840 LB-825 45-333 45-2108-1 K-6505 K-6504 K-6503 45-404 45-403 45-400 45-402 45-401 Cat. No. C- 5

Wire Strippers Section C pgs 2-25 10/23/08 2:43 PM Page 6

Wire Preparation

Data T®-Cutter Wire Cutters T®-Cutter Wire Cutters

I Hardened steel, sheer-type blades I Spring-loaded automatic opening 45-075 I Convenient plier nose for extra 45-074 gripping strength I Corrosion-resistant, black oxide finish I Tough steel construction I Locking tab keeps spring I Cuts round communication cable and maintains cable geometry in place for better cable performance Wire Strippers Cuts multi-pair cable up to .500 in. (12.7mm) and coaxial cable I Description Wire Range Cat. No. up to RG-9/U Up to 1/2 in. O.D. fine-stranded wire T®-Cutter Wire Cutter I Suitable for soft cables (not ACSR) and 10 AWG solid wire 45-123 I Steel reinforced center conductors can be trimmed with bolt Reflex™ Premium Up to 1/2 in. O.D. fine-stranded wire cutting holes T®-Cutter Wire Cutter and 10 AWG solid wire 45-423 I Cushioned comfort grip handles I Locking latch keeps tool closed in pouch T®-Cutter Lite Wire Cutter I Data T®-Cutter II designed for RG-58 and RG-6 coaxial cable In today’s cutting-edge electronic production Description Cat. No. and assembly operations, the T®-Cutter Data T®-Cutter 45-074 Lite is a “must-have.” Stranded or solid, copper or aluminum, this Data T®-Cutter II 45-075 wire cutter cuts cleanly and accurately. Compact and Combo Tool lightweight with a cushioned ESD grip prove comfort and precision go hand-in-hand. I Convenient, four-function tool features precision-ground I Knife-type blade provides a shear-type cut stripping holes and Lightweight, compact design knife-to-anvil I cutting blades I Perfect for copper and aluminum wire I Crimps bare and I Cushioned ESD grip insulated terminals Description Cat. No. Strips 8 – 20 AWG solid and 10 – 22 AWG stranded wire I T®-Cutter Lite Wire Cutter 45-260 I Cuts unhardened bolts (4-40, 6-32, 8-32, 10-24 and 10-32) and reforms threads

Description Cat. No. Coax Strip and Crimp Tool Combo Tool 30-428 I Precision, form-ground stripping holes remove outer jacket and insulation Multi-Crimp Strip Tool from RG-59 and RG-6 I Cuts wire coaxial cable I Crimps insulated I Durable blades cut and non-insulated copper-coated steel conductors wires I Three crimping nests for crimping F-connectors and ring terminals I Cuts bolts Description Cat. No. I Strips 10-22 AWG wire Coax Strip & Crimp Tool 30-433 Description Cat. No. Coax Strip & Crimp Tool w/F-Connectors 30-433F Multi-Crimp Strip Tool 45-778

C-6 www.idealindustries.com 1-800-435-0705 for Customer Service Section C pgs 2-25 10/23/08 2:43 PM Page 7

Tools and Totes

Cable Ripper Cutter I Slits cable sheathing before stripping wires I Handles all common BX, MCAP, I Quick, clean and easy end or mid-run removal of jacket MC and Flex cables I Convenient built-in wire gauge I Blade cuts armor without damage to internal Description Cat. No. conductors Side Entry Cable Ripper 45-118 I Splices cleanly through casings with only a Underground Feeder few turns I Handle knob stores up (UF) Cable Stripper to six replacement blades I Self-adjusting stripping blades automatically select proper position Description Cat. No. Replacement blades (5/pack) 35-781 I Strips 12 AWG solid to 14 AWG Underground Feeder (UF) Cable Rotary Armored Cable Cutter 35-782 I Strips Twin and Earth cable I Open-throat construction allows unlimited strip length Round Cable Slitting and Ringing Tool Wire Strippers I Neatly removes outer cable sheath and then inner wire I Cuts around cable jacket as sheathing to desired lengths well as slits the length of jacket for easy removal I Lightweight, ergonomic design reduces user fatigue I Use with single or Description Cat. No. multiple conductor cable up to Underground Feeder Cable Stripper 45-235 1.75 in. O.D. I Blade adjusts for jacket Grip-N-Strip™ thicknesses up to .125 in. End Stripper I Spare blade in handle base Description Cat. No. I Self-adjusting stripping blades Cable Stripper for 1/4 in. to 3/4 in. O.D. 45-128 automatically select proper position Cable Stripper for 3/4 in. to 11/2 in. O.D. 45-129 Strips 12 AWG solid to 20 AWG I Replacement Blades for 45-128 and 45-129 (2/pkg.) L-7486 stranded PVC insulated wire I Dual strip-length gauge marks at 3/16 in. and 5/16 in. Stripmaster® Wire Strippers I Cuts up to 12 AWG solid wire One-step stripping enchances productivty I Lightweight, ergonomic design reduces user fatigue I Spring-action motion increases leverage and I Reinforced fiberglass construction I reduces operator fatigue I Hardened steel blades for extra strength and longer life I Precision-ground, knife-type blades provide clean, accurate stripping Description Cat. No. Grip-N-Strip™ End Stripper 45-227 Description Cat. No. Stripmaster® Wire Stripper, 10-22 AWG 45-092 Stripmaster® Wire Stripper, Coax RG-6 45-262 Stripmaster® Wire Stripper, 10-22 AWG 45-292 See Section D for complete Stripmaster® Wire Stripper line.

1-800-435-0705 for Customer Service www.idealindustries.com C-7 on the letter ™ identification inside of our handles provides quick identification, even by touch FastFinder Crimper vide better durability for strenuous for vide better durability Cable Cutter and durability. All of our LASERedge All and durability. tools have and teeth, which are more laser-hardened blades precise and pro cutting steel or ACSR.applications like Full polish for maximum corrosion resistance ongue & Groove T Laser-hardened blades Laser-hardened and teeth last four times longer ™ (Ideal for cutting screws, nails, hardened wire and ACSR) Blade Design LASERedge pliers feature “knife-to-anvil” cutting blades for long life. Custom hardened tool steel for durability Long Nose Long . It is one of the reasons our tools . It is one of the reasons Textured Santoprene Textured slip resistant grip www.idealindustries.com for Customer Service 1-800-435-0705 8 Diagonal Cross-hatched jaws so wires won’t slip when pulling C- outperform the competition in performance outperform LASERedge™ high carbon, 1080 pliers use steel, which without extra strength and hardness provides sacrificing flexibility

Hand Tools Section C pgs 2-25 10/23/08 2:43 PM Page 8 Page PM 2:43 10/23/08 2-25 C pgs Section Section Cpgs2-2510/23/082:43PMPage9 Side-Cutting Pliers P I I I I I I I I I All ofthefeatures oftheSide-CuttingPliersplus: -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService Side-Cutting Pliers r Vinyl-coated, comfort-grip handlesfor asecure grip Unique reverse rivet protects smoothactionofpliermovement High-leverage designprovides 40%more cuttingpower L Cuts har Knif toughest applications Dr Double-dipped gripsfor extra cushioningcomfort Mirr emium Electrician’s aser-hardened bladesandserrated jawsfor long-termdurability op-f e-to-anvil bladesnev or-polished finishtomaintainpr or dened wire, bolts and ACSR dened wire, boltsandACSR ged, high-carbonsteelconstructionwithstands w/Crimping Die w/Fish Tape w/Fish Puller w/Crimping Die er needr esharpening emium appearance 30-3430 35-012 ecito Dpe ade)Cat.No. Description (DippedHandles) ecito SatGi™Hnls Cat. No. Description (Smart-Grip™Handles) w/fish tapepullerandcrimpingdie 9-1/4 in.NewEnglandhigh-leverage 9-1/4 in.NewEnglandnosehigh-leveragew/crimpingdie 9-1/4 in.NewEnglandnosehigh-leveragew/fishtapepuller Description (Dipped 9-1/4 in.NewEnglandnosehigh-leveragew/crimpingdie 9-1/4 in.NewEnglandnosehigh-leveragew/fishtapepuller ade)Cat.No. Handles)

Tools andTotes A

Honors

w

Gr

ar

eat eat d 35-3012 30-3430 35-3012 30-435 30-430 35-012 C- 9

Hand Tools Section C pgs 2-25 10/23/08 2:44 PM Page 10

Diagonal-Cutting Pliers

35-3028 35-029

8 in. Diagonal w/Angled Head

I Drop-forged, high-carbon steel construction withstands Description (Smart-Grip™ Handles) Cat. No.

Hand T toughest applications 8 in. High-leverage Diagonal 35-3028 Knife-to-anvil blades never need resharpening I 8 in. High-leverage Diagonal w/angled head 35-3029 I Laser-hardened blades cut hardened wire, bolts and ASCR Description (Dipped Handles) Cat. No. ools I Vinyl-coated, comfort-grip handles for a secure grip 8 in. High-leverage Diagonal 35-028 I High-leverage design provides 40% more cutting power 8 in. High-leverage Diagonal w/angled head 35-029 I Models 35-029 and 35-3029 feature a convenient angled head for hard-to-reach areas and rocking out nails Long-Nose Pliers

35-3038 35-039

I Narrow profile head designed for working in tight areas Description (Smart-Grip™ Handles) Cat. No. I Serrated jaws provide secure gripping surface 8-1/2 in. Long Nose w/Cutter 35-3038 I Drop-forged, high-carbon steel construction Description (Dipped Handles) Cat. No. 6 in. Long Nose w/Cutter 35-036 I Knife-to-anvil blades never need resharpening 7-3/4 in. Long Nose w/Cutter 35-037 I Laser-hardened blades cut hardened wire, bolts and ASCR 8-1/2 in. Long Nose w/Cutter 35-038 I Vinyl-coated, comfort-grip handles for a secure grip 8-1/2 in. w/Cutter & stripping holes for 12 & 14 AWG wire 35-039

Tongue and Groove Pliers

35-3430 35-460

Description (Smart-Grip™ Handles) Jaw Opening Cat. No. (Inches) I Patented undercut tongue and groove design 10 in. Tongue & Groove Pliers 2 35-3430 ensures solid grip Jaw Opening Description (Dipped Handles) (Inches) Cat. No. I Patented reinforced flange protects against breakage 6-1/2 in. Tongue & Groove Pliers 7/8 35-426 9-1/2 in. Tongue & Groove Pliers 1-1/2 35-420 I Laser-hardened teeth remain sharp longer 10 in. Tongue & Groove Pliers 2 35-430 Drop-forged, high-carbon steel construction I 12 in. Tongue & Groove Pliers 2-1/4 35-440 I Vinyl-coated, comfort-grip handles for a secure grip 16 in. Tongue & Groove Pliers 4-1/4 35-460

C-10 www.idealindustries.com 1-800-435-0705 for Customer Service Section C pgs 2-25 10/23/08 2:44 PM Page 11

Tools and Totes

Cable Cutters

35-3052 35-052

I Drop-forged, high-carbon steel construction Description (Smart-Grip™ Handles) Cat. No. I Precision-ground, hardened cutting edges provide accurate cuts 9-1/2 in. Cable Cutter 35-3052 without cable distortion Description (Dipped Handles) Cat. No. ools I Designed for maximum leverage with minimum effort 9-1/2 in. Cable Cutter 35-052 I Cuts 2/0 copper and 4/0 aluminum (not for use on ACSR) I Vinyl-coated, comfort-grip handles Hand T

Multi-Crimp Tools

30-3429 30-429

I Crimps bare or insulated terminals and splices on Description (Smart-Grip™ Handles) Cat. No. 10 – 22 AWG wire 9-3/4 in. Multi-Crimp Tool 30-3429 I Knife-to-anvil blades never need resharpening Description (Dipped Handles) Cat. No. I Excellent leverage for easy crimping and cutting 9-3/4 in. Multi-Crimp Tool 30-429 I Drop-forged, high-carbon steel construction I Vinyl-coated handles provide a solid, comfortable grip

Crimp Tool

I Crimps all IDEAL crimp sleeves I Excellent leverage for right-angle, double-indent crimps I Cuts and twists wire I Vinyl-coated handles provide a solid, comfortable grip

Description Cat. No. Crimp Tool - 10-1/4 in. 30-425

1-800-435-0705 for Customer Service www.idealindustries.com C-11 Crimper FastFinder™ letter identification on the inside of our handles provides quick identification, even by touch Cable Cutter ve etime of quality use. et precise, providing exceptional durability, easy exceptional durability, et precise, providing ongue & Groo T High leverage rivet requires less cutting force WireMan™ pliers provide professional results for everyday use. everyday results for professional provide pliers WireMan™ pliers; they are of electrical are the workhorse tools These rugged y cutting and a lif esign Long Nose Long ™ Blade D WireMan pliers feature “knife-to-knife” cutting blades for easy cuts. Custom hardened chrome vanadium steel for durability Large head for extra strength extured Santoprene T slip-resistant grip Diagonal www.idealindustries.com for Customer Service 1-800-435-0705 Cross-hatched jaws so wires won’t slip when pulling 12 C-

Hand Tools Section C pgs 2-25 10/23/08 2:44 PM Page 12 Page PM 2:44 10/23/08 2-25 C pgs Section Section Cpgs2-2510/23/082:44PMPage13 Side-Cutting Pliers Diagonal-Cutting Pliers -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService I I I I I I I I I I I Ergonomic handlesfor comfortable, all-dayuse Induction har Sharp, knife-to-knife bladesfor easycutting High leverage pivot requires lesscuttingforce Custom chrome vanadiumsteelfor durability Ergonomic handlesfor comfortable, all-dayuse Cross-hatched jawssowires won’tslipwhenpulling Induction hardened teethfor longlife Sharp, knife-to-knife bladesfor easycutting High leverage pivot requires lesscuttingforce Custom chrome vanadiumsteel for durability dened teethf 30-4430 or longlif e 35-4028 7 in.CuttingPliers Description (DippedHandles) 9-1/4 in.Side-CuttingPliersw/crimpandfishtapepuller 9-1/4 in.Side-CuttingPliers 8 in.Side-CuttingPliers 7 in.CuttingPliers Description (Smart-Grip™Handles) 8 in.Diagonal-CuttingPliersw/angledhead 8 in.Diagonal-CuttingPliers 6 in.Diagonal-CuttingPliers Description (DippedHandles) 8 in.Diagonal-CuttingPliersw/angledhead 8 in.Diagonal-CuttingPliers 6 in.Diagonal-CuttingPliers Description (Smart-Grip™Handles) 9-1/4 in.Side-CuttingPliersw/crimpandfishtapepuller 9-1/4 in.Side-CuttingPliers 8 in.Side-CuttingPliers 35-5 Tools andTotes 012 35-5029 35-5029 35-5028 35-5026 35-4029 35-4028 35-4026 30-5430 35-5012 30-5420 30-5419 30-4430 35-4012 30-4420 30-4419 Cat. No. Cat. No. Cat. No. Cat. No. C- 13

Hand Tools Section C pgs 2-25 10/23/08 2:44 PM Page 14

Long-Nose Pliers

35-4038 35-5035 Hand T I Custom chrome vanadium steel for durability Description (Smart-Grip™ Handles) Cat. No. I High leverage pivot requires less cutting force 6 in. Long-Nose Pliers w/Strip & Crimp 35-4035 6 in. Long-Nose Pliers ools I Sharp, knife-to-knife blades for easy cutting 35-4036 I Induction hardened teeth for long life 8 in. Long-Nose Pliers 35-4038 I Cross-hatched jaws so wires won’t slip when pulling Description (Dipped Handles) Cat. No. 6 in. Long-Nose Pliers w/Strip & Crimp I Ergonomic handles for comfortable, all-day use 35-5035 6 in. Long-Nose Pliers 35-5036 8 in. Long-Nose Pliers 35-5038

Tongue and Groove Pliers

35-4430 35-5430

I Custom chrome vanadium steel for durability Description (Smart-Grip™ Handles) Cat. No. I Ergonomic handles for comfortable, all-day use 10 in. Tongue & Groove Pliers 35-4430 Description (Dipped Handles) Cat. No. 10 in. Tongue & Groove Pliers 35-5430

C-14 www.idealindustries.com 1-800-435-0705 for Customer Service Section C pgs 2-25 10/23/08 2:44 PM Page 15

Tools and Totes

Multi-Crimp Tools

30-4429 35-5431

I Custom chrome vanadium steel for durability Description (Smart-Grip™ Handles) Cat. No. I High-leverage pivot requires less force 9-1/4 in. Multi-Crimp Tool 30-4429 I Ergonomic handles for comfortable, all-day use 9-1/4 in. Multi-Crimp Tool - Bare Terminals 35-4431 ools I Cuts, crimps and splices 10 – 22 AWG wire for Description (Dipped Handles) Cat. No. insulated and non-insulated crimp connectors 9-1/4 in. Multi-Crimp Tool 30-5429 9-1/4 in. Multi-Crimp Tool - Bare Terminals 35-5431 Hand T

Cable Cutters

35-4052 35-5052

I Custom chrome vanadium steel for durability I High-leverage pivot requires less force Description (Smart-Grip™ Handles) Cat. No. 9 in. 2/0 Cable Cutter 35-4052 I Sharp, knife-to-knife blades for easy cutting Description (Dipped Handles) Cat. No. I Induction hardened teeth for long life 9 in. 2/0 Cable Cutter 35-5052 I Ergonomic handles for comfortable, all-day use

Tenite Grips

I Fits LASERedge™ and Description Cat. No. WireMan™ Pliers Replacement grips for 6 in. pliers (one pair) 35-006 I Not insulated from Replacement grips for 7 in. pliers (one pair) 35-007 electrical shock Replacement grips for 8 in. or 9 in. pliers (one pair) 35-008 I Boil in water to soften for easy installation onto handles

1-800-435-0705 for Customer Service www.idealindustries.com C-15 Section C pgs 2-25 10/23/08 2:44 PM Page 16

Twist-a-Nut™ Screwdriver/Nutdriver

Textured Santoprene™ grip ® provides excellent torque and Patented Wire-Nut Wire resists perspiration, water, Connector Wrench accepts a oil and chemicals wide variety of connectors.

Six torsion bars provide exceptional grip Hand T Accu-Loop™ Wire Looping Hole ools (Image actual size.) Accu-Loop™ Wire Patented Wire-Nut® Wrench accepts a wide variety of IDEAL wire connectors (and others) including: looping holes

Wing-Nut® Wire-Nut® Twister® B-Cap® WingTwist™ / WireTwist™ 9-in-1 Ratch-a-Nut™ 7-in-1 Twist-a-Nut™

Screwdriver Both Screwdriver/Nutdrivers Ends Ratchet! I Includes universal Wire-Nut® Wire Connector Wrench in handle to help install twist-on wire connectors I Includes wire-looping hole in handle Ratcheting wire connector I I Includes #1 & #2 Phillips, 1/4 in. & 3/16 in. slotted, 1/4 in. & wrench prevents finger fatigue 5/16 in. Nutdriver and gets in tight spots I #35-909 includes #1 & #2 Square Recess in place of I Premium screwdriver ratchet mechanism #1 & #2 Phillips can handle high torque without failure I Twist-a-Nut™ handle is interchangeable with new conduit I Ergonomic, slip-free comfort grip deburrer head (#35-096) and 6-in-1 Tap Tool (#35-922) I Accepts Twist-a-Nut™ replacement bits Description Cat. No. Includes: 1/4 in. and 3/16 in. slotted, #1 & #2 Phillips, 1/4 in., 5/16 I 7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver in., 7/16 in. nutdrivers, ratcheting screwdriver end, ratcheting wire 35-908 connector wrench and wire-looping hole in handle 7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver with square tip 35-909

Description Cat. No. 9-in-1 Ratch-a-Nut™ Screwdriver 35-988 Replacement Bits (for both Ratch-a-Nut™ and Twist-a-Nut™) Description Cat. No. Replacement Bits (for both Ratch-a-Nut™ and Twist-a-Nut™) 1/4 in. slotted – #2 Phillips 35-911 Description Cat. No. 3/16 in. slotted – #1 Phillips 35-912 1/4 in. slotted – #2 Phillips 35-911 1/4 in. slotted – #2 Square Recess 35-913 3/16 in. slotted – #1 Phillips 35-912 3/16 in. slotted – #1 Square Recess 35-914 1/4 in. slotted – #2 Square Recess 35-913 #15 & #10 Torx® 35-915 3/16 in. slotted – #1 Square Recess 35-914 Torx® is a trademark of Camcar division of Textron, Inc. #15 & #10 Torx® 35-915 Torx® is a trademark of Camcar division of Textron, Inc.

C-16 www.idealindustries.com 1-800-435-0705 for Customer Service Section Cpgs2-2510/23/082:45PMPage17 Screwdrivers Twist-a-Nut™ Pro Electrician’s 6-in-1 Twist-a-Nut™ Tapping Tool -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService I I I I I ecito Cat.No. Description I I I 1/4 in.x6SlottedCabinetTip #2 x4in.Phillips 1/4 in.x4Slotted #2 x6in.Robertson ecito Cat.No. Description Twist-a-Nut™ Shaftassemblyincludes:Collar, 35-422&35-423 tapping side,10-24,12-24&1/4-20ontheother Twist-a-Nut™ Tapping Tool includes:6-32,8-32&10-32onone W T V W Convenient Wire-Nut scr Precision ground tipprovides secure fitin and ConduitDeburrer (#35-083) Handle isinterchangeable with7-in-1 Screwdriver (#35-908) sizes oneachend Rev obstructions Forms newthreads, re-forms burred threads andcleansout ough, chr apor-blasted tippr rench inendofhandle ire-looping holeinhandle ew slot ersible, high-carbontapwiththr ome vanadiumsteelshank events platechipping ® Wire Connector ee clearlymarkedthread 30-333 30-332 30-331 30-330 35-923 35-922 I I I Deburring Tools Twist-a-Nut™ Conduit Twist-a-Nut™ ConduitWiring Kit I I I I I I I ecito Cat.No. Description Twist-a-Nut™ Pouchonly Carrying Twist-a-Nut™ ComboPack ecito Cat.No. Description Replacement Blades(2/pack) Conduit DeburringTool -headonly, #2squaretip Conduit DeburringTool -#2squaretip Conduit DeburringTool -headonly, slottedtip Conduit DeburringTool, slottedtip T #15 #1 square, #10 & 3/1 slotted squar Spar Strong easy-slidemetalbeltclip r NylonTwist-a-Nut™ carryingpouchholdsallthree toolsplus Shaft (35-923),T T Squar Deburring Head- T Scr Includes Twist-a-Nut™ (35-927) Carrying P twist-on connectors Wrench inhandleendeasesinstallationof Lifetime guarantee (excludesblades) Wire-NutUniversal screwdriver Head canbeusedindrillorcordless shaft (#35-908) 7-in-1 Twist-a-Nut™IDEAL Screwdriver Head removes andisinterchangeable with screws thanslottedversion Square tip“seats”muchmore quicklyonfitting without slipping fittingsetscrews Hooded tiptightensEMT 3/4 in.and1thinwallconduit Deburrs insideandoutsideedgesof1/2in., oom f orx wist-a-Nut™ T wist-a-Nut™ ewdriver (35-908), ewdriver (35-908), 6 in.slotted& ® e Bits(1/4 in. ), 8-P e Tip (35-098), e Tip (35-098), or f our r ouch ocket Tools andTotes eplacement bitsortaps ap T hr e, ool ee ® Wire Connector Accu-Loop looping holes 35-097 35-098 35-075 35-096 35-083 35-927 35-926 35-098 C- ™ 17 wire

Hand Tools Section C pgs 2-25 10/23/08 2:45 PM Page 18

Cushioned-Grip Screwdrivers

Cushioned-rubber grip

Special tip treatment for precise fit Hand T ools

Chrome vanadium steel shank

FastFinder™ identification on the end of handles

8-Piece Screwdriver 5-Piece Screwdriver Set Set 35-194

35-154

35-186 35-193 35-183 35-151 35-194 35-164 35-154 35-166

35-186 35-151 35-166 Includes: Includes: I 1/4 in. x 6 in. HD Cabinet I 1/4 in. x 6 in. HD Cabinet I 1/4 in. x 4 in. Square Shank HD Keystone I 1/4 in. x 4 in. Square Shank HD Keystone I 1/4 in. x 4 in. HD Keystone I 5/16 in. x 6 in. Keystone I 5/16 in. x 6 in. Keystone I 3/16 in. x 6 in. Cabinet I 3/16 in. x 3 in. Cabinet I Phillips #2 x 4 in. I 3/16 in. x 6 in. Cabinet I Phillips #1 x 3 in. I Phillips #2 x 4 in. Description Cat. No. Description Cat. No. 8-Piece Screwdriver Set 35-298 5-Piece Screwdriver Set 35-297

C-18 www.idealindustries.com 1-800-435-0705 for Customer Service Section Cpgs2-2510/28/088:38AMPage19 Slotted Heavy-Dutyw/CabinetTip -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService w/Keystone Tip w/Keystone Slotted Heavy-Duty I I I I I I I I I I I I I I ecito ld eghTtlLnt Cat. No. Total Length BladeLength Description qaeSakBaeLnt oa eghCat.No. Total Length BladeLength Square Shank / n hn n i 1 n 14-3/8in. 12-3/8in. 10-3/8in. 10in. 8-3/8in. 8in. 6in. 4in. 1/4 in.Shankandtip 1/4 in.Shankandtip 1/4 in.Shankandtip 1/4 in.Shankandtip /6i.Sakadtp8i.13in. 11in. 8-3/8in. 8in. 6in. 4in. 5/16 in.Shankandtip 5/16 in.Shankandtip 1/4 in.Shankandtip on hn ld eghTtlLnt Cat.No. Total Length BladeLength Round Shank 5/16 in.Shankandtip 5/16 in.Shankandtip 1/4 in.Shankandtip 1/4 in.Shankandtip Cushioned rubbergrip Tough, chrome vanadiumsteel shanks Nickel-chrome platingfor corrosion resistance Precision ground tipprovides secure fitinscrew slot Vapor-blasted tipprevents plate chipping Identification marksonends Large diametershankfor toughapplications Cushioned rubbergrips T Squar Precision ground tipprovides secure fitinscrew slot Vapor-blasted tipprevents platechipping Identification markonends L ough, chrome vanadiumsteelshank arger shankfor heavy-dutyapplications e-shank modelsoffer wrench-assisted turning 8 in. 6 in. 4 in. 1 in. 8-3/8 in. 3-3/8 in. 13 in. 11 in. 35-153 35-152 35-151 35-150 35-158 35-156 35-154 35-168 35-166 35-164 35-161 I I I I I Phillips Slotted CabinetTip I I I I I I ecito ld eghTtlLnt Cat. No. Total Length BladeLength Description ecito ld eghTtlLnt Cat.No. Total Length BladeLength Description 2Pilp i.8-3/8in. 3-3/8in. 6-3/4in. 4in. 1in. 3in. #3 Phillips #2 Phillips #2 Phillips #2 Phillips #1 Phillips /6i.Sakadtp i.11-3/4in. 9-3/4in. 7-3/4in. 8in. 6-3/4in. 6in. 3/16 in.Shankandtip 4in. 3/16 in.Shankandtip 3in. 3/16 in.Shankandtip 3/16 in.Shankandtip 3/16 in.Shankandtip Cushioned rubbergrip Tough, chrome vanadiumsteelshank Nickel-chrome platingfor corrosion resistance Identification markonends Vapor-blasted tipprevents platechipping Cushioned rubbergrip Tough, chrome vanadiumsteelshank Nickel-chrome platingfor corrosion resistance Precision ground tipprovides secure fitinscrew slot Identification markonends Vapor-blasted tipprevents platechipping Tools andTotes 10 in. i.11in. 10-3/8in. 6 in. 6 in. 13-3/4 in. 35-196 35-195 35-194 35-191 35-193 35-190 35-188 35-186 35-184 35-183 C- 19

Hand Tools 35-202 35-406 35-404 35-290 35-291 35-292 35-293 35-294 35-295 35-296 each locations d-to-r ers or piercing, punching and scribing or piercing, 4 in. Brown 3-1/4 in.3-1/4 in.3-1/4 in. Red 3-1/4 in. Yellow Green Blue 3-1/4 in. Black Shaft Length Color Cat. No. Nutdriv ® ew when collar is extended ew in place when installing in har Wire Connectors Wire ® ew-Holding ong, hollow shank handles longer bolts ough, chrome vanadium steel shank and comfort grip handle vanadium steel shank and comfort ough, chrome Heavy-duty construction f Heavy-duty construction end Identification mark on Cushioned rubber grip L Identification and color coding on ends rust plated to resist Nickel/chrome and corrosion Cushioned rubber grips Models 35-292 and 35-295 fit Twister T Holds scr Holds scr Awl 3 in. 6-3/4 in. Description Blade Length Length Total No. Cat. 3/16 in. Slotted#2 Phillips 6 in. 7 in. 10 in. 11 in. Description Blade Length Length Total No. Cat. 1/4 in. 5/16 in. 11/32 in. 3/8 in. 7/16 in. 1/2 in. 4 in. Red 3/16 in. I I I Description I I I I I I I I Awl Nutmaster Scr Cat. No. 35-690 35-691 35-692 35-693 35-694 35-695 35-696 35-203 35-200 3, 4 12, 14 12, 14 5, 6, 7 5, 6, 7 8, 9, 10 8, 9, 10 For Screw Sizes ank action for quick and easy use ank action for www.idealindustries.com for Customer Service 1-800-435-0705 or threading screws in switches, fixtures and anchors in switches, fixtures screws or threading 20 Precise tip for square-recess screws square-recess tip for Precise easy identification Color-coded handle for resistance corrosion plating for Nickel-chrome vanadium steel shank chrome Tough, Cushioned rubber grip Vapor-blasted tip prevents plate chipping tip prevents Vapor-blasted slot fit in screw secure tip provides Precision-ground resistance corrosion plating for Nickel-chrome vanadium steel shank chrome Tough, Cushioned rubber grip Ideal f ends Identification mark on One-handed cr C- #2 x 8 in. #3 x 4 in. #3 x 8 in. #0 x 4 in. #1 x 4 in. #1 x 8 in. #2 x 4 in. 3/16 in. Shank and Tip and 1/4 in. Shank#2 Phillips Tip 9-3/4 in. 8-3/4 in. Description Description Length Total Cat. No. I I I I I I I I I I I I I Square Head Square Quick-Rotating

Hand Tools Section C pgs 2-25 10/23/08 2:45 PM Page 20 Page PM 2:45 10/23/08 2-25 C pgs Section Section C pgs 2-25 10/23/08 2:45 PM Page 21

Tools and Totes

Slim Electronics 10-in-1 Screwdriver/Nutdriver 36-245 I Includes 1/4 in. slotted, #2 36-243 Phillips, 3/16 in. slotted, 36-244 #1 Phillips, #1 & #2 square recess, #15 and ® 36-242 #10 Torx and 5/16 in. & 1/4 in. Nutdriver 36-241 I Cushion grip for comfort and performance 36-240 Description Cat. No. 10-in-1 Screwdriver/Nutdriver 35-910 I Designed for maximum handling 36-246 comfort when working in tight areas Replacement Bits (for 10-in-1 Screwdriver) I Tough, chrome vanadium steel shank Description Cat. No. I Phosphate tip for longer wear life 1/4 in. slotted – #2 Phillips (2/pack) 35-940 3/16 in. slotted – #1 Phillips (2/pack) 35-941 I Rotating cap for optimum control for precise centering ools #1 & #2 Square Recess (2/pack) I Color-coded cap for easy identification 35-942 #15 & #10 Torx® (2/pack) 35-943 Description Style Blade Length Cat. No. Torx® is a trademark of Camcar division of Textron, Inc. Hand T 3/32 in. Cabinet Tip 2-1/2 in. 36-240 3/32 in. Cabinet Tip 3 in. 36-241 1/8 in. Cabinet Tip 4 in. 36-242 5-in-1 Screwdriver/Nutdriver 1/8 in. Cabinet Tip 6 in. 36-243 I Contains: 5/16 in. Nutdriver, 5/32 in. Cabinet Tip 4 in. 36-244 #1 Phillips, #2 Phillips, 5/32 in. Cabinet Tip 6 in. 36-245 9/32 in. slotted and 3/16 in. slotted #0 – 1/8 in. Phillips Head 2-1/2 in. 36-246 Cushion grip for 7-Piece Set includes one each of 36-240 thru 36-246 I 36-248 performance and 4-Piece Set includes one each of 36-240, -241, -242 & -246 36-249 comfort

7-Piece Nutdriver Set 35-290 35-291 Description Cat. No. 35-292 5-in-1 Screwdriver/Nutdriver 35-905 35-293 Replacement Bits (for 5-in-1 Screwdriver) Description Cat. No. 35-294 #1 Phillips – 3/16 in. slotted LA-4123 #2 Phillips – 9/32 in. slotted LA-4124 35-295

35-296 Recessed Light Kit

Includes: I 3/16 in. x 3-1/4 in. I 1/4 in. x 3-1/4 in. I 5/16 in. x 3-1/4 in. I All the tools I 11/32 in. x 3-1/4 in. needed to install recessed lights I 3/8 in. x 3-1/4 in. I Long spring tool easily installs and removes spring I 7/16 in. x 4 in. I Compact nutdriver is 2-1/4 in. - providing added clearance in IDescription1/2 in. x 4 in. Cat. No. recess lighting 7-Piece Nutdriver Set 35-299 I Cushion grip for added comfort

Description Cat. No. Recessed Light Kit 35-698

1-800-435-0705 for Customer Service www.idealindustries.com C-21 Section C pgs 2-25 10/23/08 2:46 PM Page 22

PowerBlade™ Cable Cutter Ratcheting Cable Cutter

I Cuts hard drawn copper up to 400 KCMIL (MCM) and soft copper, aluminum and multiple (Drill not included) conductor cable up to 600 KCMIL (MCM) I Hardened steel blades ensure consistent cuts and long-term durability I Rounded blade design minimizes cable distortion during cutting I Quick release mechanism simplifies blade back-out I Locking mechanism keeps handles closed for easy storage

Description Cat. No. 400 KCMIL (MCM) Ratcheting Cable Cutter* 35-056 Cable Cutters Replacement blade (moveable side only) 35-085 *Max. Jaw Opening - 1.375 in. Not for cutting steel or ASCR. Ratcheting Cable Cutter I Extremely versatile: fits almost any drill (12V minimum) I 750 KCMIL Ratcheting Cable Cutter is I Cuts up to 750 MCM hard - drawn designed to cut 750 KCMIL (MCM) copper, 1000 MCM aluminum* and smaller hard-drawn copper and aluminum cables I Heavy-duty gears and specially hardened blades for professional quality I Hardened steel blades ensure consistent cuts and Rounded blade design minimizes cable I long-term durability distortion during cutting Rounded blade design minimizes No need to mess with battery packs or I I cable distortion during cutting special chargers; this tool works with the drill you already carry! (Folding handle for storage.) I Quick release mechanism simplifies blade back-out Description Cat. No. I Locking mechanism keeps handles closed for easy storage PowerBlade™ Cable Cutter 35-078 I Molded-in foot provides stability and leverage when making PowerBlade™ Replacement Handle K-8947R multiple cuts PowerBlade™ Replacement Blades (pair) K-8906R Description Cat. No. PowerBlade™ Replacement Torque Arm Assembly K-8909 750 KCMIL (MCM) Ratcheting Cable Cutter* 35-053 PowerBlade™ Replacement Carrying Case K-8926 Replacement blade (moveable side only) 35-057 *Max. Jaw Opening - 2 in. Not for cutting steel or ASCR. *Max. Jaw Opening - 2 in. Not for cutting steel or ASCR. Long-Arm Cable Cutters Telco Ratcheting Cable Cutters

Telco Ratcheting Cable Cutter jaw cuts I High strength forged blades for ultimate I durability up to 2,700 pair telephone cable and Stalpath® type communications cable I Precision-ground jaws make 35-033 clean cuts with minimal I Hardened steel blades ensure consistent cable distortion cuts and long-term durability Rounded blade design I Replaceable blades I minimizes cable distortion I For copper and aluminum only. Not designed for steel or ACSR. during cutting

Description Length Cat. No. I Quick release mechanism simplifies blade back-out 250 MCM Long-Arm Cable Cutter 14 in. 35-031 500 MCM Long-Arm Cable Cutter 22 in. I Locking mechanism keeps 35-032 handles closed for easy storage 1000 MCM Long-Arm Cable Cutter 32 in. 35-033 I Molded-in foot provides stability and leverage when making Replacement Head – 250 MCM (for 35-031) — 35-031B multiple cuts Replacement Head – 500 MCM (for 35-032) — 35-032B Description Cat. No. Replacement Head – 1000 MCM (for 35-033) — 35-033B Telco Ratcheting Cable Cutter* 35-055 CAUTION: Comfort-grip handles are not designed for protection Replacement blade (moveable side only) 35-054 against electrical shock. Do not use on live circuits. *Max. Jaw Opening - 3 in. Not for cutting steel or ASCR.

C-22 www.idealindustries.com 1-800-435-0705 for Customer Service Section C pgs 2-25 10/23/08 2:46 PM Page 23

Tools and Totes

Heavy-Duty Crimp Tool

Cutter I Crimp nests for 2, 4, 6 or 8 AWG and 8-38 mm2 uninsulated terminals I Rotating crimp nests eliminate costly die changes I Decimal and metric wire sizes clearly marked on each crimp nest I Comfort-grip handles for a secure grip I Connections are UL Listed when using this tool with IDEAL Non-Insulated Terminals (#8 - #4 AWG).

Description Cat. No. ools Heavy-Duty Crimp Tool 83-005 Crimp Tool

I Crimps all IDEAL crimp sleeves I Excellent leverage for right- I Handles all common BX, MCAP, MC and Flex cables angle, double-indent crimps Cutter/Crimp T I Blade cuts armor without damage to internal conductors I Cuts and twists wire I Splices cleanly through casings with only a few turns I Vinyl-coated handles provide a solid, I Handle knob stores up to six replacement blades comfortable Description Cat. No. grip Replacement blades (5/pack) 35-781 Description Cat. No. Rotary Armored Cable Cutter 35-782 Crimp Tool - 10-1/4 in. 30-425

Mechanical Indentor and Buchanan Construction Products Crimp Tool Four-Way Crimp Tool

I Patented design ensures even compression and reliable connections I Spring-loaded, cam- actuated plungers I Use with aluminum (6 AWG to 4/0) and copper (8 AWG to 250 KCMIL) wires I Fingertip adjustment for different connector sizes

I Adjustable crimping nests with clearly marked gauges Description Cat. No. I Lightweight and easy to operate Four-Way Crimp Tool C-24 I Rugged cast steel construction for long-term durability I Connections are UL Listed when using this tool with IDEAL Ratchet Crimp Tool Non-Insulated Terminals (#8 - #4 AWG). I Crimps insulated or bare Description Cat. No. terminals and splices on 10 – 22 AWG wire Mechanical Indentor 88-843 I Ratchet action prevents release prior to crimp connection — helps ensure uniform crimps I Vinyl-coated handles provide a solid, comfortable grip

Description Cat. No. Ratchet Crimp Tool 83-001

1-800-435-0705 for Customer Service www.idealindustries.com C-23 Section C pgs 2-25 10/23/08 2:46 PM Page 24

Wire Preparation

Adjustable Wrenches IDEAL Wipes™ The Multi-Purpose Towel

I Pre-moistened wipes require no water

35-020 35-021 I Cleans dirt, grease, lube and grime I Durable fabric scrubs without tearing I Infused with natural hand moisturizers I Narrow profile head reaches into tight spaces and Vitamin E Tight tolerance on thumbscrew won’t loosen or wobble with use I I Orange citrus scent I Extra wide jaw capacity with standard and metric markings I Lightweight, non-conductive handle (not insulated) Description Qty. Cat. No. IDEAL Wipes™, 12 in. x 9 in. 82/can 38-500 Description Jaw Capacity Cat. No. Hand T 8 in. Adjustable Wrench 1-1/8 in. 35-020 Forged-Steel Handled Hammer 10 in. Adjustable Wrench 1-5/16 in. 35-021

ools 6-in-1 Twist-a-Nut™ Tapping Tools

I Forms new threads, I One-piece drop-forged, tempered-steel polished re-forms burred threads head and handle and cleans out I Long, straight claws simplify removal of electrical fixtures obstructions I Comfortable, perforated anti-vibe grips I Reversible, high-carbon tap with three clearly I Elongated neck for hitting inside boxes marked thread sizes on each end Description Cat. No. I Handle is interchangeable with 7-in-1 Screwdriver (#35-908) 18 oz. x 12-1/2 in. Electrician’s Fiberglass-handled Hammer 35-210 and Conduit Deburrer (#35-083)

Description Cat. No. Electric Engraving Tools 6-in-1 Twist-a-Nut™ Tap Tool (includes 6-32, 8-32 & 10-32. 10-24, 12-24 & 1/4-20 taps) 35-923 I Low-cost, industrial-quality marker quickly and easily engraves metal, glass, stone, ceramics, Triple-Tap Tool plastics, hard rubber, wood and many other hard materials I Cleans and chases burred threads I Unique design reduces bouncing and provides smooth, easy writing I Taps three hole sizes I Operates at 7,200 strokes per minute Stroke adjusts to vary depth of mark Description Cat. No. I Triple Tap Tool (includes 10/24, 8/32, & 6/32 taps) 35-411 I Includes carbide-tipped point for normal markings Triple Tap Tool (includes 10/32, 8/32, & 6/32 taps) 35-412 I Diamond point available for engraving extra-hard materials Replacement Taps (for 35-923, 35-411 and 35-412) (50 to 64 Rockwell, scale C) Replacement Tap Thread Sizes Cat. No. Description Cat. No. 10/24, 8/32, & 6/32 35-421 Engraver w/carbide-tipped point — 120V, 60 Hz 11-111 10/32, 8/32, & 6/32 35-422 Engraver w/carbide-tipped point & 3-conductor grounded cord & plug — 120V, 60 Hz 11-113 10/24, 12/24 & 1/4-20 35-423 Carbide-tipped replacement point 6-32, 8-32 & 10-32 on one side, 10-24, 12-24 & 1/4-20 on the 11-200 other side 35-922 Diamond replacement point 11-201

C-24 www.idealindustries.com 1-800-435-0705 for Customer Service Section Cpgs2-2510/23/082:46PMPage25 Torpedo Level -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService Magnetic-Tip MeasuringTape Measuring Tape Automatic BladeLock I I I I I I I I Description ecito Cat.No. Description 9 in.T ecito Cat.No. Description Mag-Tape™ Tape Measure-25ft. Auto-Lock™ Tape Measure-25ft. mitre indimlighting W 9 in.aluminumfr Full rubberjacketprotects case Durable nyloncoatedblade measur Str Comfortable, shock-resistant rubbergrip Push buttonfor smoothbladeretraction extended Blade automaticallystaysoutwhen hite windowsprovide easyreading ofplumblevel and45° orpedo Level ong magnetictipfor oneperson ement ame withmagneticandV-grooved edges 35-205 35-238 35-242 Cat. No. Pocket Knives Utility Knife Hex-Key Sets I I I I I I I I I ecito Cat.No. Description ecito Cat.No. Description ecito Cat.No. Description Lineman’s JackKnifew/sheepfootblade blade Hawkbill Knifew/curved Electrician’s Knifew/spearpointandscrewdriverblade Replacement blades–Universal(10/pack) Utility Knife 5/16 in.&3/8in.) 5-1/4 in.handlew/five5-in.keys(3/16in.,7/321/4 9/64 in.,5/323/167/32in.&1/4in.) 4 in.handlew/nine3-in.keys(5/64in.,3/327/641/8 storage compartment Includes three bladesin Built inpull-linecutter requiredsystem —nodisassembly Quick-change retractable blade grip Dual-dur 8 Brass liners Durable Buyrate strength anddurability High-carbon stainlesssteelbladeconstructionf 2-1/4 in.bladelocksinposition 650 steelconstruction 650 35-285 ometer, slip-resistant Tools andTotes ® non-slip handle 52635-287 35-286 or extr a 35-287 35-286 35-285 35-301 35-300 35-147 35-146 C- 25

Hand Tools ester ool Pouch y -Stripper Wire Stripper ® -Stripper Wire Stripper ® oltage/Continuity T -5 T ® -5 T s Hammer s Hammer XL V ® ® ote™ Leather T ol-Con uff-T 8 0 ongue and Groove, #35-052 – 2/0 Cable Cutter) #61-201 – Replacement batter #35-311 – T crimper, #35-029 – 8” Offset Diagonal, #35-038 – 8” Long Nose, #35-430 – #35-029 – 8” Offset Diagonal, #35-038 crimper, 10” T Slotted round shank) #35-210 – Electrician’ #61-086 – V tape puller, #35-038 – 8” Long Nose, #35-430 – 10” Tongue and Groove, #35-038 – 8” Long Nose, #35-430 – 10” Tongue tape puller, #35-012 – 9-1/2” Cable Cutter) #45-415 – Reflex™ T Phillips, #35-186 – 3/16” x 6 Slotted Cabinet Tip, #35-164 – 1/4” x 4 Slotted Phillips, #35-186 – 3/16” x 6 Slotted Cabinet Tip, round shank) #35-210 – Electrician’ #35-286 – Hawkbill knife • • Set Includes: • w/ Five LASERedge Pliers with dipped grips (#30-430 – 9-1/4” Linesman • #45-120 – Premium T • Screwdriver #35-908 – 7-in-1 Twist-A-Nut™ • #35-164 – 1/4 x 4 Cushion Grip Screwdrivers (#35-194 – #2 x 4 Phillips, Two • Conduit Deburring Tool #35-083 – Twist-A-Nut™ • • Measure #35-242 – 25' Auto-Lock™ Tape • Knife #35-285 – Electrician’s • Set Includes: • Pliers with dipped grips (#35-012 – 9-1/4” Linesman w/fish Four LASERedge • • Crimp/Strip Tool #30-428 – Combo • Grip Screwdrivers (#35-193 – #1 x 3 Phillips, #35-194 – #2 x 4 Four Cushion • • Measure Auto-Lock™ Tape #35-242 – 25' • Fuse Puller #34-002 – Pocket • • Hacksaw #35-261 – Ergonomic • Large Mouth Bag #35-427 – 18” 16-Piece Set - 16-Piece Set #35-800 16-Piece Set - #35-8 ip, #35-164 – s Tote™ s Tote™ -Stripper Wire Stripper -Stripper Wire Stripper ® ® oltage/Continuity Tester featuring Pliers featuring XL V ® www.idealindustries.com for Customer Service 1-800-435-0705 90 26 ongue and Groove, #35-3052 – 9-1/2” Cable Cutter) ongue and Groove, #35-3052 – 9-1/2” Cable Cutter) ongue and Groove) Linesman w/fish tape puller, #35-3038 – 8” Long Nose, #35-3430 – 10” #35-3038 – 8” Linesman w/fish tape puller, T #2 x 4 Phillips, #35-186 – 3/16” x 6 Slotted Cabinet Tip, #35-164 – Tip, #2 x 4 Phillips, #35-186 – 3/16” x 6 Slotted Cabinet 6 Screw holding slotted) 1/4” x 4 Slotted round shank, #35-406 – 3/16” x #35-286 – Hawkbill Knife #61-086 – Vol-Con Linesman w/fish tape puller, #35-3038 – 8” Long Nose, #35-3430 – 10” Linesman w/fish tape puller, T #45-915 – Kinetic™ Reflex™ T #2 x 4 Phillips, #35-186 – 3/16” x 4 Slotted Cabinet T 1/4” x 4 Slotted round shank) #35-286 – Hawkbill Knife #35-462 – Journeyman Electrician’ C- Set Includes: • – 9-1/4” Four LASERedge™ Pliers with Smart-Grip™ Handles (#35-3012 • #45-915 – Kinetic™ Reflex™ T • Screwdriver #35-908 – 7-in-1 Twist-A-Nut™ •#35-194 – #Five Cushion Grip Screwdrivers (#35-193 – #1 x 3 Phillips, • • Hammer #35-210 – Electrician’s • Measure #35-242 – 25' Auto-Lock™ Tape • Level #35-205 – Torpedo • • Carrier Premium Leather Tool #35-975 – Tuff-Tote™ Set Includes: • Pliers with Smart-Grip™ handles (#35-3012 – 9-1/4” Three LASERedge™ • • Grip Screwdrivers (#35-193 – #1 x 3 Phillips, #35-194 – Four Cushion • Measure Auto-Lock™ Tape #35-242 – 25' • • Size Fuse Puller #34-002 – Medium • Level #35-205 – Torpedo • Tool Kits Tool 13-Piece Set - #35-7 17-Piece Set - 17-Piece #35-809

Hand Tool Kits Section C 26-50 10/23/08 3:39 PM Page 26 Page PM 3:39 10/23/08 C 26-50 Section

Section C 26-50 10/23/08 3:39 PM Page 27

Tools and Totes

Tool Kits featuring Pliers

12-Piece Set - 6-Piece Set - #35-805 #35-794

Set Includes: Set Includes: • Four LASERedge™ Pliers with dipped grip handles (#35-012 – 9-1/4” • One LASERedge Plier with dipped grip handles Linesman w/fish tape puller, #35-028 – 8” Diagonal, #35-038 – 8” Long (#30-430 – 9-1/4” Linesman w/crimper) Nose, #35-430 – 10” Tongue and Groove) • #45-120 – Premium T®-5 T®-Stripper Wire Stripper ool Kits • #45-120 – Premium T®-5 T®-Stripper Wire Stripper • #35-908 – 7-in-1 Twist-a-Nut™ Screwdriver • Four Cushion Grip Screwdrivers (#35-193 – #1 x 3 Phillips, #35-194 – • #35-242 – 25' Auto-Lock™ Tape Measure #2 x 4 Phillips, #35-186 – 3/16” x 4 Slotted Cabinet Tip, #35-164 – • #35-300 – Utility Knife Hand T 1/4” x 4 Heavy-Duty Slotted round shank) • #35-505 – Pocket Pal™ Tool Holster • #35-242 – 25' Auto-Lock™ Tape Measure • #10-466 – Electrician’s Leather Tool Pouch • #10-398 – Web Belt

Tool Kits featuring Pliers

12-Piece Set - 5-Piece Set - #35-5805 35-5792

Set Includes: Set Includes: • Four WireMan™ Pliers with dipped grip handles (#35-5012 – 9-1/4” • One WireMan™ Plier with dipped grip handles (#30-5430 – Linesman, #35-5028 – 8” Diagonal, #35-5038 – 8” Long Nose, 9-1/4” Linesman w/crimper) #35-5430 – 10” Tongue and Groove) • #45-120 – T®-5 T®-Stripper Wire Stripper • #45-120 – Premium T®-5 T®-Stripper Wire Stripper • Two Screwdrivers (#35-194 – #2 x 4 Phillips, #35-186 – 3/16” x 4 Slotted • Four Cushion Grip Screwdrivers (#35-193 – #1 x 3 Phillips, #35-194 – Cabinet Tip) #2 x 4 Phillips, #35-184 – 3/16” x 4 Slotted Cabinet Tip, #35-164 – • #35-505 – Pocket Pal™ Tool Holster 1/4” x 4 Slotted round shank) • #25' Auto-Lock™ Tape Measure • #10-466 – Electrician’s Leather Tool Pouch • #10-398 – Web Belt

1-800-435-0705 for Customer Service www.idealindustries.com C-27 Cat. No. 35-969 35-950 35-969BLK 35-950BLK 4 in. wide ability esistant reinforced bottom esistant reinforced e-r or long-term dur ead f unnel belt loop accommodates belts up to 2-1/ elease snaps and tape chain T Eight-pocket, belt-mounted pouch features large utility compartment large Eight-pocket, belt-mounted pouch features outside pockets, loops, seven with two dividers and six screwdriver r carrying comfort handle for grab leather Exclusive lower back strain helps relieve Removable shoulder strap lock-stitched and heavy, plated-steel hardware Rust-resistant, long-term durability for nylon thread Oil and moistur Convenient 6 in. x 8 in. tool carrier with four center screwdriver with four 6 in. x 8 in. tool carrier Convenient outside pockets slots, two interior compartments, two divided outside tool loops and four carrying comfort handle for leather grab Exclusive lower back strain helps relieve Removable shoulder strap upright for Unique stand-alone design keeps tools standing easy identification and access lock-stitched and heavy, plated-steel hardware Rust-resistant, nylon thr uff-Tote™ Tool Pouches Tool uff-Tote™ Premium Leather Carrier w/shoulder strap Premium Black Leather Carrier w/shoulder strap Premium Leather Pouch w/shoulder strap Premium Black Leather Pouch w/shoulder strap Description Cat. No. Description I I I I I I I I I I I T Tuff-Tote™ Tool Carriers Tool Tuff-Tote™ 35-975 35-325 35-975BLK tan years. over the se tool carriers are d Leather Line d Leather es two divided inside ced bottom or eatur and tanned for added strength and other material, the einf eather that stands like no up to the job L Standar table tool constructed of top-grain, natural cowhide constructed of top-grain, durability. Watch their color age to a deep their Watch durability. , top-grain apped grab handle for carrying comfort carrying comfort handle for apped grab esistant r anned in e tool carrier f e-r our outside pockets and eight outside tool loops www.idealindustries.com for Customer Service 1-800-435-0705 anvas provide the e leather-wr 28 C- s in rugged nylon polyester or Unique stand-alone design keeps tools standing upright for easy identification and access lock-stitched and heavy, plated-steel hardware Rust-resistant, long-term durability for nylon thread Oil and moistur Eight-inch squar Exclusiv lower back strain helps relieve Removable shoulder strap compartments with six screwdriver loops each, one large center loops each, one large compartments with six screwdriver compartment, f op of the line tool carriersop of the line are Premium Leather Carrier w/shoulder strap Premium Black Leather Carrier w/shoulder strap Standard Leather Carrier w/shoulder strap Description Cat. No. Fabric Line Fabric Durable, lightweight, por tote heavyweight c perfect storage. Convenient tool pockets easy access; mean inner compartments keep your tools organized and safe when not in use. natural oils to enhance the leather’s natural oils to enhance bag is hand inherent strength. Each againstwaxed for lasting protection stains and moisture and is or warranted for life. Natural choice. black leather – your cowhide and slow t cowhide and handcrafted from heavy handcrafted Premium Leather Line Leather Premium T I I I I I I Tuff-Tote™ Ultimate Tool Carriers Ultimate Tool Tuff-Tote™

Carriers/Pouches Section C 26-50 10/23/08 3:39 PM Page 28 Page PM 3:39 10/23/08 C 26-50 Section Section C 26-50 10/24/08 9:45 AM Page 29

Tools and Totes

Electrician’s Tool Pouch Shoulder Straps

I Seven-pocket tool pouch I Full length belt tunnel I Chain tape lanyard

I Nickel-plated hardware for long-term durability and corrosion resistance Description Cat. No. I 2-in. wide shoulder pad for added comfort Electrician’s Tool Pouch 10-466 Description Cat. No. Premium Leather Strap 35-965 Hip Holster Tool Pouches Premium Black Leather Strap 35-965BLK Standard Leather Strap 35-338 ouches I Compact, multi-pocket holsters Heavy-duty leather construction

I ool P I Riveted corners for long life Belts I Tape measure holder Hand T Description Cat. No. 6-Pocket Hip Holster, Black 35-784BLK 35-316 3-Pocket Hip Holster, Standard 35-964 35-995

Tuff-Tote™ Tester Pouches

I Fits most hand-held testers 10-398 I Easy-access top 35-995BLK I Convenient belt strap

I Nickel-plated hardware for long-term durability and corrosion Note: Tester sold separately resistance

Description Cat. No. Description Cat. No. Premium Leather Pouch w/belt strap 35-956 Premium Leather Belt – 2 in. x 48 in. 35-995 Premium Black Leather Pouch w/belt strap 35-956BLK Premium Black Leather Belt – 2 in. x 48 in. 35-995BLK Standard Leather Pouch w/belt strap 35-339 Standard Leather Belt – 1-3/4 in. x 46 in. 35-316 Web Belt 10-398

Hammer Holder

I Heavy-duty leather construction I Riveted steel hammer loop I Fits on all sizes of tool belts

Description Cat. No. Hammer Holder 10-399

1-800-435-0705 for Customer Service www.idealindustries.com C-29 Cat. No. 35-474 35-655 35-665 asteners, each 8 in. x 15 in. ester age — keeps age — keeps or connectors and f 6 pleated outside 3 om spillage enient handle loop able nylon polyester construction able nylon polyester wo pockets f ools sold separately. T construction duck Natural Designed to provide perfect perfect provide Designed to stor small parts and organized parts separate Six internally divided 5-in. deep pockets protects drawstring Convenient contents fr Conv buckets Sized to stack in 5-gallon Dur Rugged nylon poly construction 11-1/2 in. deep bag fits over 11-1/2 in. deep bag fits over 5-gallon the rim of a standard bucket convenient Forty-three pockets — and inside pockets Supplies Apron Divider Pouch™ Small Parts Bag Bucket Bag Tool Carrier Bucket Bag Tool Description Description Cat. No. Description Cat. No. I I I I I I I I Note: Wire Connectors sold separately. I I I Supplies Apron Divider Pouch™ Small Parts Bag Small Parts Pouch™ Divider Note: T Bucket Bag Tool Carrier Bucket Bag Tool 35-405 35-505 35-402 35-403 www.idealindustries.com for Customer Service 1-800-435-0705 ouches 30 C- etained until needed Easy access opening closes automatically to keep supplies safely r Holds wire connectors, staples, Holds wire use for other supplies ready and on the job Protects pocket from sharp tools from pocket Protects capacity Doubles tool carrying or on belt Can be worn in pocket Durable, water resistant material resistant water Durable, zippers self-repairing Heavy duty, Belt Bag™ Supplies Pouch Pocket Pal™ Tool Holster Pocket Pal™ Tool Zipper Pouch, 10-1/2 in. long Zipper Pouch, 12-1/2 in. long Description Cat. No. Description Cat. No. Description Cat. No. I I I I I Note: Tools sold separately. Note: Tools I I Belt Bag™ Supplies Pouch Pocket Pal™ Tool Holster Tool Pal™ Pocket Zipper P

Hand Tool Pouches Section C 26-50 10/23/08 3:39 PM Page 30 Page PM 3:39 10/23/08 C 26-50 Section Section C 26-50 10/23/08 3:39 PM Page 31

Tools and Totes

Large Mouth Bags Journeyman Electrician’s Tote™

I Compact and versatile design I Carry as a hand-tote, shoulder-tote or tool-belt I Includes removable shoulder strap and belt I Durable multi-ply construction

Description Cat. No. Journeyman Electrician’s Tote™ 35-462 otes Master Electrician’s Tote™

I Top opens completely for easy access to large tools — I Spacious and durable design reinforced to hold itself open Bags/T I Organizes and displays tools for I Measures 9 in. wide x 12 in. deep with outside and inside fast access pockets for convenient hand tool storage I Includes removable shoulder I Rugged zipper closure helps prevent tool loss strap I Removable shoulder strap I Durable multi-ply construction I Durable multi-ply construction

Description Cat. No. Large Mouth Bag – 13 in. long 35-410 Large Mouth Bag – 16 in. long 35-418 Description Cat. No. Master Electrician’s Tote™ Large Mouth Bag – 18 in. long 35-427 35-441

Note: Tools sold separately. Mechanic’s Tool Bag

I Eight narrow inside pockets designed to hold small tools I Two side pockets with closeable snaps for large tools or loose items I Double inside liner and rigid bottom prevent bag distortion I Durable nylon polyester construction

Description Cat. No. Mechanic’s Tool Bag 35-535

Note: Tools sold separately.

1-800-435-0705 for Customer Service www.idealindustries.com C-31 ® - Molded on insulation provides permanent bonding or the work to be per or handling equipment if the tools otected and f electrical protective equipment that is protective electrical der to pass certification: Tempered chrome vanadium tool steel chrome vanadium Tempered blades are super hardened for maximum quality to be pr orm in or Employees working in areas where there are potential electrical potential are there where working in areas Employees When working near exposed energized conductors or working near exposed energized When circuit Precision-ground tips provide secure fit for less spin-out ent. e some of the tests we perf e curr or the specific parts of the body e the grip is firmly bonded to the tool. DE Certification: TIONS TIONS A shall be provided with, and shall use, shall be provided L to ensure no current leakage or sparkover occurs. leakage or sparkover no current to ensure impact. damage from ensur insulating material. each employee shall use insulated tools each employee U • 3 minutes for 24 hours, then tested under current immersed in water for are Tools • 168 hours at -40° for After being stored C (-40° no to ensure dropped F), tools are • 168 hours at +70° for After being stored C (158° F), a tensile load is applied to • no flammability of the seconds to ensure 10 subjected to flame for are Tools D opriate f

E HA Regulations: I G jected to liv S L and V F E isted below ar

I L

or handling equipment might make contact with such conductors or parts. or conductors or handling equipment might make contact with such hazards hazards appr O OSHA 1910.335(a)(2)(i) OSHA 1910.335 (a)(1)(i) and using IDEAL in compliance by providing are you insulated tools! Make sure R when sub- no failure insulated tool we sell is individually tested to ensure 1000V Every • U L Testing: Testing: parts, formed. S

®

S

U A

L C e handles e ® High carbon tool steel for precision durability Non-slip guard for added safety operty damage, personal 000V insulated tools ar r P provide a sure grip and are resistant and oil to perspiration, water, chemicals Textured Santoprene Textured ce. e not heeded: gripping surface ound them. 1 gized sour otective clothing and approved eye pro- eye clothing and approved otective Permanently bonded, double insulated handles for added safety ore use. ore Serrated jaws provide secure ollowing warnings ar and durability ork. are laser hardened SHA 1910 S and NFPA 70E safety requirements when requirements safety S and NFPA 70E SHA 1910 for greater strength esult if the f otection by wearing pr Whenever possible, always de-energize lines and equipment possible, always de-energize Whenever prior to working on or ar ary and only by qualified technicians. Cutting jaws and edges ollow O www.idealindustries.com for Customer Service 1-800-435-0705 gized source. Work around energized circuits should only be done when circuits energized around Work gized source. ays f 32 doing electrical w dards for insulated tools. for dards Alw Use additional pr tection. object when either might contact an ener aged in any way. Destroy all dual-layer tools if the inner yellow layer shows layer tools if the inner yellow all dual-layer Destroy aged in any way. outer layer. the orange through Do not touch the uninsulated portion of an insulated tool or any conductiv First UL tested and classified insulated pliers tested to meet ASTMEach one designed and F1505-01, EN DIN, and IEC 60 900 test standards VDEIndividually tested and certified to 1000V AC (1500V DC) Meets OSHAinsulated tools for requirements • Tools must be kept clean and dry for proper insulating properties. proper must be kept clean and dry for • Tools • Always inspect insulated tools bef • the task. specifically designed for • Always use tools that are designed only to reduce the chance of injury where the tool may make contact with the chance of injury where designed only to reduce an ener absolutely necess • These tools meet UL 22PP, ASTM F1505-01 tools meet UL ASTM and IEC• These 22PP, 60900 stan- • injury or death may r • or becomes dam- breaks Do not use any insulated tool if the insulation cracks, • C- High visibility ergonomic handles for maximum comfort and control at-a-glance’ safety check. If the orange outer coating reveals any of the inner yellow surface, an electrician will know that this tool needs to an electrician will know surface, yellow any of the inner outer coating reveals at-a-glance’ safety If the orange check. Insulated Tools Insulated I I I I The IDEAL double insulated Santoprene Each tool features functionality. and precision comfort safety, blend of a perfect tool line creates insulated an acts as coating process in our tools, the insulated qualities found In addition to the ergonomic surface. a soft, easy-to-grip outer handles with ‘ be replaced. feature: Tools

Insulated Hand Tools Section C 26-50 10/23/08 3:39 PM Page 32 Page PM 3:39 10/23/08 C 26-50 Section Section C26-5010/23/083:40PMPage33 10-Piece BasicKit-#35-9300 18-Piece Standard Kit-#35-9301 26-Piece JourneymanKit-#35-9302 -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService #45-9615–InsulatedReflex™ • #35-9052–9-1/2in.InsulatedHigh-Leverage • Threeinsulatedscrewdrivers(#35-9321–3/16x5in.slotted,#35-9323 • Threeinsulatedpliers(#34-9430–9-1/4in.Linesmanw/crimper, #35-9029 – • Kit Includes: • #34-002–7-1/2in.Non-Conductive • #35-9352–Heavy-DutySoftTool Case • #34-002–7-1/2in.Non-Conductive • #35-9351–Heavy-DutySoftTool Case • #34-002–7-1/2in.Non-Conductive • #61-063–Volt-Sensor • • #61-063–Volt-Sensor • #35-9340–InsulatedElectrician’s • #45-9120–InsulatedWireStripperCutter • #45-9615–InsulatedReflex™SuperT • #30-9429–9-3/4in.insulatedMulti-CrimpTool • #35-9052–9-1/2in.insulatedHigh-LeverageCableCutter • Sixinsulatednutdrivers(#35-9330–3/16x5in.,#35-93311/4 • Eightinsulatedscrewdrivers(#35-9321–1/8x4in.slotted,3/165 • Fourinsulatedpliers(#30-9430–9-1/4in.Linesmanw/crimper, #35-9029– • Kit Includes: #45-9615–InsulatedReflex™ • • Eightinsulatedscrewdrivers(#35-9320–1/8x4in.slotted,#35-9321 • • Kit Includes: Super T Cable Cutter 1/4 x6in.,#35-9311–#24in.Phillips) 8 in.Offsetdiagonal,#35-9038–8-1/2LongNose) #35-9350 –Heavy-DutySoftTool Case Fuse Puller Fuse Puller Fuse Puller Skinning Knife #35-9340 –InsulatedElectrician’ Skinning Knife #35-9335 –1/2x5in.) #35-9332 –5/16x5in.,#35-93333/8#35-93347/16 #2 x4in.Phillips,#35-9312–#36Phillips) #35-9311– #35-9325 –3/8x8in.slotted,#35-9310#13Phillips, slotted, #35-9323–1/4x6in.#35-93245/167 Tongue andGrove) 8 in.Offsetdiagonal,#35-9038–8-1/2LongNose,#35-943010 Super T #35-9052 –9-1/2in.InsulatedHigh-LeverageCableCutter #35-9311 –#2x4in.Phillips,#35-9312#36Phillips) slotted, #35-9325–3/8x8in.#35-9310#13Phillips, 3/16 x5in.slotted,#35-9323–1/46#35-93245/167 T 8 in.Offsetdiagonal,#35-9038–8-1/2LongNose,#35-943010 Four insulatedpliers(#30-9430–9-1/4in.Linesmanw/crimper ongue andGrove) ® ® -Stripper WireStripper -Stripper WireStripper Tools andTotes ® ® C Tester NCV C Tester NCV s ® -Stripper WireStripper , #35-9029– C- 33

Insulated Hand Tool Kits 35-9304 35-9335 35-9336 35-9330 35-9331 35-9332 35-9333 35-9334 35-9350 35-9351 35-9352 35-9353 35-9430 30-9429 35-9038 45-9615 H G -Stripper Wire Stripper ® F EF and Groove Pliers 10 in. Tongue 9-3/4 in. Multi-Crimp Tool GH 8-1/2 in. Long-Nose Pliers Reflex™ Super T Fig. Description Cat. No. 7-Piece Insulated Nutdriver Kit with hard case (Includes all seven Nutdrivers listed above.) 3/16 in. Hex Nutdriver1/4 in. Hex Nutdriver5/16 in. Hex Nutdriver3/8 in. Hex Nutdriver7/16 in. Hex Nutdriver1/2 in. Hex Nutdriver9/16 in. Hex Nutdriver 5 in. 5 in. 5 in. 5 in. 5 in. 5 in. 5 in. Nutdriver Kit Cat. No. Soft Zipper Case for Basic Kit (35-9300) Soft Zipper Case for Standard Kit (35-9301) Soft Zipper Case for Journeyman Kit (35-9302) Hard Case for Screwdriver Kit (35-9303) & Nutdriver Kit (35-9304) Description Shaft Length Cat. No. Description Cat. No. Insulated Nutdrivers Cases DE Cat. No. 35-9303 35-9310 35-9311 35-9312 35-9320 35-9321 35-9322 35-9323 35-9324 35-9325 45-9120 35-9029 35-9052 30-9430 35-9340 C 8 in. 6 in. 4 in. 5 in. 7 in. 6 in. 7 in. Shaft Length No. Cat. B A -Stripper Wire Stripper ® www.idealindustries.com for Customer Service 1-800-435-0705 34 AB Premium T Pliers w/angled head 8 in. Diagonal Cutting CD 9-1/2 in. High-Leverage Cable Cutter 9-1/4 in. Side Cutting Linesman Pliers C- 9-Piece Insulated Screwdriver Kit with hard case (Includes all nine screwdrivers listed above.) Fig. Description Cat. No. 3/8 in. Slotted Screwdriver #3 Phillips Screwdriver 1/8 in. Slotted Screwdriver 3/16 in. Slotted Screwdriver 7/32 in. Slotted Screwdriver 1/4 in. Slotted Screwdriver 5/16 in. Slotted Screwdriver #1 Phillips Screwdriver#2 Phillips Screwdriver 3 in. 4 in. Screwdriver Kit Insulated Electrician’s Skinning Knife Insulated Electrician’s Description Description Cat. No. Insulated Pliers Insulated Insulated Knife Insulated Screwdrivers Insulated Screwdrivers

Insulated Hand Tools Section C 26-50 10/23/08 3:40 PM Page 34 Page PM 3:40 10/23/08 C 26-50 Section Section C26-5010/23/083:40PMPage35 Fuse Puller andTest Light -0-3-75frCsoe evc www.idealindustries.com 1-800-435-0705 forCustomerService Safe-T-Grip I I I I I I I I I I I I Description Description Fuse Puller&Test Light 2-1/2 in.dia.fuses;11-3/4long Large Pullerfor31to600A/250V&400A/600V fuses; 7-1/2in.long Medium Pullerfor0to100A/250V&600V Small Pullerfor250V Test capacityfrom AC/DC 100V to600V For and60A/600V useonfusesto100A/250V For 9/16 in.to1fuses Built-in resistors limitcurrent flowtoeliminatefalse indication receptacles Test prods fitparallel andtandemslot electrical connections pulls cartridgefusesandchecks Convenient pocket-sizedtoolsafely Exceed M Clearly markedamperage ranges Notched handlesprovide no-slipgrip safe, polypr F Three sizeshandlefusesranging from 0to600A r andconvenience forMaximum efficiency removing or eplacing cartridge-typefuses ully insulated,high-dielectric,glass-filled opylene construction I L specifications , 9/32in.to1/2dia.fuses;5long ® Fuse Pullers , 1/2in.to1dia. , 3/4in.to 34-012 34-003 34-002 34-001 Cat. No. Cat. No. 1000V InsulatedScrew-Holding Screwdriver Fuse Pullers I I I I I ecito Cat.No. Description ecito Cat.No. Description 1000V InsulatedScrewHoldingScrewdriver, 3/16x6in.slottedTip n i.fss 7-1/4in.long 1 in.dia.fuses; Large Pullerfor0to100A/250V&O60A/600V, 9/16in.to 5 in.long Small Pullerfor0to30A/250V, 1/4in.to1/2dia.fuses; safety No-slip grippingsurface andprotective fingerstopsfor added for greater strength Molded oftough,high-impactnylon Easy tostartscr Holds scr is extended when collar scr Split bladewedgesinto ew slot ew inplacewheninstallinghard toreach areas Tools andTotes ew whenwearingglov es 34-016 34-015 35-9406 C- 35

Insulated Hand Tools Section C 26-50 10/23/08 3:40 PM Page 36

Cutting & Holemaking Tools

IDEAL cutting tools offer a powerful line-up that includes...

I New T.K.O. Carbide-Tipped Hole Cutters provide extreme productivity gains over traditional knockouts, even through stainless steel! I A new line of Bul-Z-Eye™ Self Feed Wood Boring Bits with twin cutting edges and superior construction that cuts smoother and faster holes than the competition I Superior step drill bits that deliver! Dual fluted, titanium nitride coated bits with the NEW split-point self starting feature, deliver faster cuts, improved performance and longer tool life than conventional bits. I Bi-metal reciprocating blades for the toughest applications. Engineered bi-metal blades last up to ten times longer than standard carbon steel blades. I A broad line of flexible drill bits and specialty wood bits that deliver superior performance at any job site. I An expanded range of hacksaws and all- purpose hand saws and blades.

C-36 www.idealindustries.com 1-800-435-0705 for Customer Service Section C 26-50 10/28/08 1:00 PM Page 37

Tools and Totes

Step Drill Bits

Trust IDEAL step drill bits for precise, repetitive drilling 35-511 through the toughest materials including brass, carbon steel, cast iron, stainless steel, and more. These tough and reliable tools are constructed with a rugged titani- um nitrite exterior coating. Each step is gradually blended to ease stepping through hole sizes; reducing 35-512 the need to keep changing drill bits, which speeds up the fabrication process. Improved Split-Point tip design eliminates the need for a starter hole or punch and delivers three times faster starts, saving valuable time. The double-fluted design provides balanced cuts and 35-513 cooler operation. Step Drill Bits

35-514

35-515

Protective titanium Improved nitrite coating 35-516 Split-Point design for Double-fluted design 3x faster starts Radius-blended, multi-diameter steps

35-517 Electrician’s Step Bit Kit

I Durable blow-molded case securely holds and protects Step Step bits Drill Diameter No. of Increments Thickness Shank Dia. Cat. Sizes (Inches) Hole Sizes (Inches) (Inches) (Inches) No. I Kit includes four step bits (35-511, 35-513, 35-515 1/8 to 1/2 13 1/32 1/8 1/4 35-511 and 35-517) 1/4 to 3/4 9 1/16 1/8 3/8 35-512 I Kit provides a solution for 1/4 to 7/8 11 1/16 1/16 3/8 35-513 every electrical hole size 1/2 to 1 8 1/16 1/8 3/8 35-514* between 1⁄8 in. and 1-3⁄8 in. 1/4 to 1-1/8 16 1/16 1/16 3/8 35-515 3/16 to 1/2 6 1/16 3/8 1/4 35-516 Description Cat. No. 1/4 to 1-3/8 10 1/32 1/16 to 1/4 3/8 35-517 Electrician’s Step Bit Kit 35-520 All shanks are 1 in. length. *Requires pilot holes.

1-800-435-0705 for Customer Service www.idealindustries.com C-37 36-312 36-311 36-301 36-305 (holes cut with 1-1/8 in. cutters) ace ents 36-309 36-303 IDEAL TKO™ Competitor IDEAL more precise hole than competitors smoother, provides oviding smoother holes vailable in a full range of sizes from 1 in. to 2-1/2 in. of sizes from in a full range vailable SmoothStart™ Replacement Pilot Drill 4-Piece Carbide Hole Cutter Kit — Includes SmoothStart™ 7/8 in., 1-1/8 in., 1-3/8 in. Replacement Tip, Description Cat. No. Description Cat. No. Exclusive! SmoothStart™ pilot Exclusive! guides cutter to surf pr cutter and avoiding damage. Includes the three most common Includes the three sizes along with a spare SmoothStart™ pilot bit and a carrying case convenient SmoothStart™ Replacement SmoothStart™ Replacement Pilot Drill A 4-Piece Kit erdrill flange prev v 36-305 36-306 36-307 36-308 36-309 36-310 36-300 36-301 36-302 36-303 36-304 Integrated o penetration beyond the sheet metal. penetration beyond — — 3/4 ained, carbide tips. The innovative innovative ained, carbide tips. The 2 1-1/2 1— 3/47/8 — 1/2 1-3/42-1/2 1-1/4 1-1/8 1-1/4 1-3/81-1/2 1 — www.idealindustries.com for Customer Service 1-800-435-0705 1-7/16 — Hole Size (Inches) Conduit & Pipe Size (Inches) Cat. No. 38 C- design includes the exclusive SmoothStart™ replaceable pilot drill, replaceable SmoothStart™ design includes the exclusive cutter damage and avoiding to the surface, which guides the cutter cutter flange prevents overdrill smoother holes. An integral providing it comes to quality, When beyond the sheet metal. penetration IDEAL and durability, choice for performance is the professional’s carbide tipped hole cutters. Introducing the new TKO™ Carbide the new TKO™ Introducing IDEAL Hole Cutters from Tipped INDUSTRIES, INC. cutters offer TKO clean cutter the most efficient and by knockouts, traditional for replacement of the of the time at a fraction in a fraction making smooth holes to cut sheet metal, TKO cutters will even cost. Specifically designed fine gr cut stainless steel with Carbide Tipped Hole Cutters Hole Tipped Carbide Carbide-Tipped Hole Cutters Carbide-Tipped

Carbide Hole Cutters Section C 26-50 10/23/08 3:41 PM Page 38 Page PM 3:41 10/23/08 C 26-50 Section

Section C 26-50 10/23/08 4:17 PM Page 39

Tools and Totes

Carbide Tipped Hole Cutters

Carbide tips cut over 200 holes through stainless steel, and out- perform HSS cutters and bi-metal Integral arbor provides hole saws in sheet steel smoother, more acurate holes than hole saws or two-piece carbide- tipped cutters

Integraded overdrill flange prevents penetration beyond the sheet metal

Ejection spring Exclusive SmoothStart™ effortlessly ejects pilot drill guides cutter slug Carbide Hole Cutters See how IDEAL TKO can save time...

Total time using the IDEAL Total time using the competitors’ TKO™ knockout tool 30 Seconds More than 6 Minutes Chuck Step Drill Pilot Drill Hole

Chuck Cutter

00:10 00:10 00:30

Assemble knockout Ratchet punch & stud pull Drill hole & store 02:00 04:20

00:30 Slug removed, disassemble & store

06:20 1-800-435-0705 for Customer Service www.idealindustries.com C-39 35-373 35-374 35-375 35-376 35-377 35-378 35-379 35-380 35-381 35-382 35-383 35-384 35-385 35-386 35-387 35-388 35-389 35-390 35-340 35-341 35-342 35-343 35-344 35-345 35-346 35-347 35-348 35-349 35-350 35-351 35-352 35-353 35-354 35-355 35-356 35-357 35-358 35-359 35-360 35-361 35-362 35-363 35-364 35-365 35-366 35-367 35-368 35-369 35-370 35-371 35-372 3 4 1 2 – – – – – – – 2-1⁄2 3-1⁄2 1-1⁄2 1-1⁄4 – – – – – – – – – – 2 3 1 3⁄4 – – –– –– – – –– –– –– – – –– – – – –– – – – –– –– – –– – –– –– –– –– –– –– – –– –– –– – –– –– –– –– – 1⁄2 3⁄8 1-1⁄2 Pipe Tap Entrance Pipe 9 9 9 16 ⁄ 9 9 9 Use Arbor No. 35-391,Use Arbor No. 35-392 or 35-393 5 5-1⁄2 5-3⁄4 6 1-7⁄8 2 2-1⁄16 2-1⁄8 2-1⁄4 2-5⁄16 2-3⁄8 2-1⁄2 2-9⁄16 2-5⁄82-3⁄4 2-7⁄8 3 3-1⁄8 3-1⁄4 3-3⁄8 3-1⁄2 2-1⁄2 3-5⁄8 3-3⁄43-7⁄8 4 4-1⁄8 4-1⁄44-3⁄8 4-1⁄2 4-3⁄4 3-1⁄2 4 4-1⁄2 9⁄16 5⁄8 11⁄16 3⁄4 13⁄16 7⁄815⁄16 1 1-1⁄16 1-1⁄8 1-3⁄16 1-1⁄4 1-5⁄16 1-3/8 1-7⁄16 3⁄41-1⁄21-9⁄16 1-5⁄8 1-11⁄19 1⁄2 1-3⁄4 1-13 1-1⁄4 Use Arbor No. 35-394, 35-536, 35-537 or 35-538 Use Arbor No. 35-394,35-536 or 35-537 Use Arbor No. 35-394,35-536 *All pipe sizes listed in the Pipe Tap Size*All pipe sizes listed in the Pipe Tap and Pipe Entrance Size columns are standard industry sizes. All pipes are sized by the nominal inside diameter. Saw Diameter(Inches) Size* (Inches) Size* (Inches) No. Cat. esistant atigue r or faster cuts and or faster able tool steel teeth aws will rival the Bi-metal construction combinesand hardened dur long and consistent for body cutting life sized teeth clear Variable the work chips away from quickly f vibration reduced welded to f hole s ™ Bi-Metal Hole Saws Bi-Metal 1-5/8 in. cutting depth cuts through 1-5/8 in. cutting depth cuts through 2’ x 4’s on the first cut ability teeth, IDEAL IRONMAN hen it comes to quality, performance and durability, performance hen it comes to quality, or clean e and dur Bi-metal hole saws IDEAL from INDUSTRIES, INC, with FLEX FREE aw f ™ www.idealindustries.com for Customer Service 1-800-435-0705 ed bi-metal construction ov d arbors 40 or long lif Variable pitch tooth geometry for fast cutting and reduced fast pitch tooth geometry for Variable vibration Cuts all types of machinable metal including stainless steel, wood, nail embedded wood, plastic and fiberboard Thicker, Thicker, clean backing plate for true holes and longer tool life Impr f C- Threads fit all Threads standar I I I I New improved solid plate New improved flexing of design resists the new hole s true holes and added durability re-engineered bi-metal backing plate, a thick “flex-free” construction, and variable sized Hole Saws IRONMAN cutting speed and longevity of any in the industry. The bi-metal The of any in the industry. cutting speed and longevity construction including: tool and stainless cuts metal, wood and plastics list of 51 wood, plywood, and pipe. An extensive nail embedded steel, available to meet all your and kits are accessories, sizes, effective cutting needs. W IDEAL saws. hole choice for is the professional’s

Hole Saws Section C 26-50 10/23/08 3:52 PM Page 40 Page PM 3:52 10/23/08 C 26-50 Section Section C 26-50 10/23/08 3:53 PM Page 41

Tools and Totes

Hole Saw Arbors Hole Saw Kits

Electrician’s Hole Saw Kit

35-391 35-392 35-393 35-394 35-536 35-537 35-538 I Reliable 8-piece kit in a Durable steel construction means years of long-lasting performance. durable plastic case Set-screw in body allows easy replacement of the pilot drill. Save I Find electrical sizes for valuable time through this versatile design. Instantly change hole saws pipe and conduit through 2 in. without tools and without having to remove the arbor from the chuck.

Thread Chuck Fits Hole Kit 35-400 Includes: Shank Size Size Size Saw Sizes Cat. No. Description Cat. No. 1/4 in. Round 1/2-20 in. 1/4 in. 9/16 - 1-3/16 in. 35-391 Hole Saw sizes 7/8 in., 1-1/8 in., 1-3/8 in., 1-3/4 in., 2 in. 35-400 3/8 in. Hex 1/2-20 in. 3/8 in. 9/16 - 1-3/16 in. 35-392 & 2-1/2 in. Also includes arbor models 35-393 & 35-394 ws 7/16 in. Hex 1/2-20 in. 1/2 in. 9/16 - 1-3/16 in. 35-393 7/16 in. Hex 5/8-18 in. 1/2 in. 1-1/4 - 6 in. 35-394 7/16 in. Hex 5/8-18 in. 1/2 in. 1-1/4 - 6 in. 35-536 14-Piece Electrician’s 3/8 in. Hex 5/8-18 in. 3/8 in. 1-1/4 - 6 in. 35-537 Hole Saw Kit Hole Sa 7/16 in. Hex 5/8-18 in. 1/2 in. 2 - 6 in. 35-538 I Generous 14-piece kit offers a Replacement Pilot Drills for Hole Saw tremendous selection Arbors I You’ll find electrical sizes for pipe and conduit through 4 in. Split point pilot drills start on 35-397 I Sturdy plastic case survives contact for faster penetration extra wear and tear and less walking. Kit 35-401 Includes: Description Cat. No. Description Cat. No. 4-1/2 in. x 1/4 in. – Fits 35-391, 35-393, 35-394 & 35-538 arbors 35-397 Hole Saw sizes 7/8 in., 1-1/8 in., 1-3/8 in., 1-3/4 in., 2 in., 3-1/4 in. x 1/4 in. – Fits 35-392, 35-536 & 35-537 arbors 35-398 2-1/2 in., 3 in., 3-5/8 in., 4-1/8 in., 4-1/2 in. Also includes arbor 35-401 models 35-391, 35-393 & 35-394 and extension bar 35-396. Arbor Extension

For boring jobs that require a longer reach, arbor extensions add up to 18 in. length 19-Piece Master Electrician’s and can be easily connected to IDEAL hole saw arbors. Hole Saw Kit

Description Cat. No. I For electrical, industrial and all-purpose Extension for 7/16 in. Arbors, 12 in. long 35-396 maintenance needs Adjustable Can Light Hole Saws I 19-piece kit comes in sturdy durable plastic case I Cuts drywall and ceiling tile I Plumbing and electrical sizes for pipe and conduit I Self-sharpening carbide coated through 4 in. cutting blades Kit 35-518 Includes: Includes two I Description Cat. No. dust shields to minimize clean up Hole Saw sizes 3/4 in., 7/8 in., 1 in., 1-1/8 in., 1-3/8 in., 1-1/2 in., 1-3/4 in., 2 in., 2-1/4 in., 2-1/2 in., 3 in., 3-5/8 in., 4-1/8 in. 35-518 & 4-1/2 in. Also includes arbor models 35-393, 35-394, pilot drill 35-397 (two pieces) and extension bar 35-396. Drill not included.

Description Cat. No. Adjustable Can Light Hole Saw – 10 sizes from 2-1/2 in. to 7 in. 35-598 Adjustable Can Light Hole Saw – 13 sizes from 6-1/4 in. to 10-3/8 in. 35-599

1-800-435-0705 for Customer Service www.idealindustries.com C-41 Section C 26-50 10/23/08 3:53 PM Page 42

Reciprocating Blades

I Bi-metal blades last up to ten times longer than carbon steel blades I Flexible spring-back provides long blade life I Super-hard, high speed steel teeth for a sharp, long-lasting cutting edge I Shatterproof for tough applications I Fits all reciprocating saws using 1/2 in. universal shank

L/W/TH Blade

Reciprocating Blades (Inches) TPI Material Bock Qty. Application Cat. No. Metal Cutting

Pipe, structural steel, stainless steel: 36-059 6 x 3/4 x .035 14 Bi-metal Straight 5 3/32” - 1/4”, Non-ferrous metal: 3/32” - 3/8” Pipe, structural steel, stainless steel: 6 x 3/4 x .035 14 Bi-metal Straight 25 36-059B 3/32” - 1/4”, Non-ferrous metal: 3/32” - 3/8” Structural steel, pipe, conduit, stainless steel: 4 x 3/4 x .035 18 Bi-metal Straight 5 1/16” - 3/16” thick, Non-ferrous metal: 1/16” - 5//16” thick 36-055 Structural steel, pipe, conduit, stainless steel: 6 x 3/4 x .035 18 Bi-metal Straight 5 1/16” - 3/16” thick, Non-ferrous metal: 1/16” - 5/16” thick 36-057 Structural steel, pipe conduit, stainless steel: 6 x 3/4 x .035 18 Bi-metal Straight 25 1/16” - 3/16” thick, Non-ferrous metal: 1/16” - 5/16” thick 36-057B Structural steel, pipe, conduit, stainless steel: 8 x 3/4 x .035 18 Bi-metal Straight 5 1/16” - 3/16” thick, Non-ferrous metal: 1/16” - 5/16” thick 36-060 6 x 3/4 x .035 24 Bi-metal Straight 5 All metal less than 1/8” thick: Tubing conduit, trim 36-058 6 x 3/4 x .035 24 Bi-metal Straight 25 All metal less than 1/8” thick: Tubing conduit, trim 36-058B Heavy-Duty Metal Cutting Heavy-duty blade for cutting structural steel, pipe, 36-085 6 x 3/4 x .050 18 Bi-metal Straight 2 conduit, stainless steel: 1/16” to 3/16” thick Heavy-duty blade for cutting structural steel, pipe, 8 x 3/4 x .050 10/14 Bi-metal Straight 2 36-086 conduit, stainless steel: 1/8” to 1/2” thick Heavy-duty blade for cutting structural steel, pipe, 36-087 12 x 3/4 x .050 10/14 Bi-metal Taper 5 conduit, stainless steel: 1/8” to 1/2” thick Wood w/Nails Fast cutting, roughing-in work, nail-embedded wood, 6 x 3/4 x .050 6 Bi-metal Taper 5 36-065 remodeling Fast cutting, roughing-in work, nail-embedded wood, 6 x 3/4 x .050 6 Bi-metal Taper 25 36-065B remodeling Fast cutting, roughing-in work, nail-embedded wood, 9 x 3/4 x .050 6 Bi-metal Taper 5 36-066 remodeling Fast cutting, roughing-in work, nail-embedded wood, 36-067 12 x 3/4 x .050 6 Bi-metal Taper 5 remodeling Demolition 9 x 7/8 x .062 6 Bi-metal Taper 2 Demolition work in nail-embedded wood, remodeling 36-095 9 x 7/8 x .062 10 Bi-metal Taper 2 Demolition work in wood, metal, pipe and fire and rescue 36-096 General Purpose

6 x 3/4 x .035 10 Bi-metal Straight 5 Nail embedded wood, metal and non-ferrous metal 36-075 composition materials & plastics 1/8” - 1/2” Specialty Cutting Iron pipe, fiberglass, reinforced plastics, ceramic tile, 36-090 8 x 3/4 x .050 Grit Tung. Grit Straight 2 stone, slate and brick. 3 x 5/16 x .035 18 Bi-Metal Scroll 5 Scroll cutting wood, cast aluminum and non-ferrous metals 36-054 Plaster/Drywall For plaster, drywall, plaster board & lath. 36-088 6 x 3/4 x .050 6 Bi-metal Taper 2 Bi-directional cutting

C-42 www.idealindustries.com 1-800-435-0705 for Customer Service Section C 26-50 10/23/08 3:53 PM Page 43

Tools and Totes

Long-Life Metal Cutting Reciprocating Blades

I Engineered to be the longest lasting, metal cutting blades available I Long-life blades perform up to three times as many cuts as similar metal cutting blades I 8% cobalt cutting edge for extreme durability I Shatterproof bi-metal design I Longer life for greater value

L/W/TH Blade Long-Life Blades (Inches) TPI Material Bock Qty. Application Cat. No. Long-Life blade for cutting structural steel, pipe, con- 6 x 3/4 x .035 18 Bi-metal Straight 5 36-043 duit, stainless steel, sheet metal: 1/16” - 3/16” thick

Long-Life blade for cutting structural steel, pipe, con- 36-044 8 x 3/4 x .035 18 Bi-metal Straight 5 duit, stainless steel, sheet metal: 1/16” - 3/16” thick

Long-life blade for cutting rebar, barstock, angle iron 36-046 6 x 1 x .042 14 Bi-metal Straight 5 and other heavy gauge metals: 1/8” and thicker w Blades

Long-life blade for cutting rebar, barstock, angle iron 36-048 12 x 1 x .050 14 Bi-metal Straight 5 and other heavy gauge metals: 1/8” and thicker

80 Durability 10.0

Cutting Speed Band Sa 9.0 70 Average Speed of Cuts Material: SAE 1020 Tubed Steel 8.0 (In Seconds) 60 (Round) 1Љ OD × .065 Wall All blades tested are 6Љ blades 7.0 50 6.0 Recip./ 40 5.0

30 4.0 3.0 Number of Cuts 20 2.0 10 1.0

Mil 0 IDEAL IDEAL Starrett Leno Mil Mil Bosc Greenfield 0.0 IDEAL Bosc Starrett Leno IDEAL Greenfield Mil waukee waukee waukee (.042) (.035) (.035) (.035) (.035) (.035) (.035) (.035) (.042) waukee x (.035) (.042) (.035)h/V (.035) h x BluMol (.035) (.042) A (.035)

Progressive Tooth Reciprocating Blades

I Specially designed for all purpose cutting I Cut multiple materials without changing blades I Tough bi-metal and HCS construction for long life. L/W/TH Blade Long-Life Blades (Inches) Material Bock Qty. Application Cat. No. All metal, non-ferrous metal, sheet metal, 6 x 3/4 x .035 Progressive Bi-metal 5 36-056 pipe and other metal materials For wood, nail-embedded wood, non-ferrous 8 x 3/4 x .050 Progressive Bi-metal 5 metals, plastic and fiberglass 36-076

Portable Band Saw Blades

I Bi-metal construction I For pipe, tubing and solids I Fit all standard portable band saw machines I Cut any machinable metal, including conduit, angle iron, structurals, rebar and stainless steel tubing L/W/TH (Inches) TPI Qty./Pack Cat. No. 44-7/8 x 1/2 x .020 10 3 36-070 44-7/8 x 1/2 x .020 14 3 36-071 44-7/8 x 1/2 x .020 18 3 36-072 44-7/8 x 1/2 x .020 24 3 36-073

1-800-435-0705 for Customer Service www.idealindustries.com C-43 or ability eated and xide coated, ed dur dened f ov har heat tr impr Black o threads screw with burr-free screw Robust replaceable lead Robust replaceable with no binding or jamming. control ate holes esulting in for faster, more more faster, for teeth for maximum maximum teeth for balanced drilling and cleaner holes and use with Twin cutting edges Twin Quick change Wider precision ground precision Wider pneumatic drills fast bit changes fast shank design for Quickly powers through wet and treated woods ecision machined shaft eliminates r wobble r P true, accur 36-252 36-253 36-254 36-255 36-256 36-257 36-258 36-259 36-260 36-261 36-262 36-273 36-819 36-250 36-251 for Cat. — — 1 in. 1⁄2 in. 3⁄4 in. 1-1⁄2 in. 1-1⁄4 in. Entrance Size 2 in. 1 in. 1-1⁄2 in. 1-3⁄4 in. 1-1⁄8 in. 1-1⁄4 in. 1-3⁄8 in. Self Feed Wood Boring Bits Boring Wood Self Feed ood Boring Bit ood Boring Bit ood Boring Bit in. 2-1⁄8 — ood Boring Bit ood Boring Bit ood Boring Bit ood Boring Bit ood Boring Bit www.idealindustries.com for Customer Service 1-800-435-0705 44 C- 3 in. Self-Feed Wood Boring Bit3 in. Self-Feed Wood Boring Bit3-5⁄8 in. Self-Feed Wood Boring Bit4-5⁄8 in. Self-Feed Wood 3-5⁄8 in.5-1⁄2 in. Extension 3 in. 4-5⁄8 in.18 in. Extension 3 in. in. 2-1⁄2 4 in. Ext Ext — — 1-1⁄2 in. Self-Feed W 1-3⁄4 in. Self-Feed W 2 in. Self-Feed W 2-1⁄8 in. Self-Feed W Boring Bit2-1⁄4 in. Self-Feed Wood Boring Bit2-9⁄16 in. Self-Feed Wood 2-1⁄4 in. 2-9⁄16 in. — 2 in. 1 in. Self-Feed W 1-1⁄8 in. Self-Feed W 1-1⁄4 in. Self-Feed W 1-3⁄8 in. Self-Feed W IDEAL Competitor Cuts a smoother, more accurate hole with less more accurate hole with Cuts splintering than a smoother, competitive bits. decreases This resistance during pipe installation and improves on-the-job productivity. All bits are 4-5/8 in. long and come with a 7/16 in. shank designed to easily accommodate all 1/2 in. drill chucks. Introducing the new premium line of BULZ-EYE™ the new premium Introducing wood self-feed IDEALboring bits from INDUSTRIES, INC. BULZ-EYE™ bits self-feed to and benefits that combine features include a number of superior bit product of any self-feed the most outstanding performance deliver twin cutting edges and new design features The available today. with up to 50% teeth These ground wider cutting surface. precision speeds, better balance and control, cutting improved deliver features in the market. holes then the leading brand accurate and clean more with the best materials BULZ-EYE™ manufactured bits are self-feed and performance quality, and machinery available to ensure and coated, heat treated also black oxide bits are The consistency. performance it comes to quality, When added durability. for hardened IDEAL bits. self-feed and durability, choice for is the professional’s Description Diameter Pipe & EMT No. Wood Boring Bits Section C 26-50 10/23/08 3:53 PM Page 44 Page PM 3:53 10/23/08 C 26-50 Section Section C 26-50 10/28/08 1:08 PM Page 45

Tools and Totes

Replacement Lead Screws 5-Piece Kit

I Keeps self-feed bits running fast and true Includes four different bit sizes, a 5-1/2 in. I Easily replaced with hex wrench providing extended drill life and extension bar, and a optimum cost-per-hole value convenient carrying case, giving you everything you need for drilling multiple hole sizes in any wood material. 36-271 36-270 Kit 36-265 Includes: Description Cat. No.

5-1/2 in. extension bar, 1-3/8 in., 1-1/2 in., 2-1/8 in., 36-265 2-9/16 in. bits

6-Piece Kit

Includes five Description Cat. No. different bit sizes, a 3-pack small replacement lead screws, fits bit sizes 1 in. - 2-9/16 in. 36-271 5-1/2 in. extension bar, 3-pack large replacement lead screws, fits bit sizes 3 in. - 4-5/8 in. 36-270 and a convenient carrying case, giving you everything you need for drilling multiple hole sizes in Extension Bars any wood material. ood Boring Bits Kit 36-266 Includes: W I Cuts into hard-to-reach areas Description Cat. No. I Fits IDEAL Auger Bits 5-1/2 in. extension bar, 1 in., 1-1/4 in., 1-3/8 in., 2 in., 36-266 2-9/16 in. bits

Description Cat. No. 9-Piece Kit 5-1/2 in. Extension Bar 36-273 Includes eight different 18 in. Extension Bar 35-819 bit sizes, a 5-1/2 in. extension bar, and a convenient carrying case, Sharpening File giving you everything you need for drilling multiple hole sizes in any wood material. I Keeps durable bits working like new Kit 36-269 Includes: I High-grade sharpener hones Description Cat. No. dulled edges quickly and 5-1/2 in. extension bar, 1 in., 1-1/8 in., 1-1/4 in., 1-3/8 in., 36-269 efficiently 1-1/2 in., 1-3/4 in., 2-1/8 in., 2-9/16 in. bits

Description Cat. No. Sharpening File 36-272 Lead screws can be easily replaced with the use of a hex wrench providing extended drilling life and optimum cost-per-hole value.

1-800-435-0705 for Customer Service www.idealindustries.com C-45 35-979 35-729 35-892 35-730 35-893 35-892 35-896 35-897 35-898 35-899 35-732 35-726 35-971 35-727 35-972 35-728 35-976 35-977 35-978 5 in. 35-818 35-819 15 in.

W E

N 18 in.

Sizes 7-1/2 in. 1/2 in. 5/8 in. 18 in. 15 in. 1-1/8 in. 11/16 in. 7-1/2 in. 5 in. om work piece 62° cutting angle reinforces edge the cutting greater and provides durability and cutting edge lead screw Hardened and resistance wear increased provide extended life wood chips angle evacuates Secondary relief jamming auger from quickly and prevents than body of bit for larger cutting head makes hole Oversized easy ejection fr 1-1/8 in. RESI-MASTER™ Auger 1-1/4 in. RESI-MASTER™ Auger1/2 in. RESI-MASTER™ Auger 1-1/4 in.5/8 in. RESI-MASTER™ Auger 7-1/2 in.11/16 in. RESI-MASTER™ Auger 5 in. 3/4 in. RESI-MASTER™ Auger13/16 in. RESI-MASTER™ Auger7/8 in. RESI-MASTER™ Auger 11/16 in.15/16 in. RESI-MASTER™ Auger 18 in.1 in. RESI-MASTER™ Auger 3/4 in. 15 in. 13/16 in.1-1/8 in. RESI-MASTER™ Auger 18 in. 18 in.1-1/4 in. RESI-MASTER™ Auger 7/8 in. 15 in. 15 in. 15/16 in. 18 in. 18 in. 15 in. in. 15 1-1/8 in. 1 in. 1-1/4 in. 18 in. 18 in. 15 in. 18 in. 15 in. 15 in. Power Ship Augers - Bit Length = 7-1/2”, Power Ship Augers - Bit Length = 5”, Shank = 7/16”Twist Description5/8 in. RESI-MASTER™ Auger11/16 in. RESI-MASTER™ Auger 3/4 in. RESI-MASTER™ Auger13/16 in. RESI-MASTER™ Auger Hole7/8 in. RESI-MASTER™Auger Overall 5/8 in. Twist15/16 in. RESI-MASTER™ Auger 7-1/2 in. Cat. 1 in. RESI-MASTER™ Auger 5 in. 3/4 in. Diameter 13/16 in. Length 7-1/2 in. 7-1/2 in. Length 5 in. 5 in. No. 7/8 in. 15/16 in. 7-1/2 in. 7-1/2 in. 5 in. 5 in. 1 in. 7-1/2 in. 5 in. Auger Bit Extensions, 18 in. DescriptionAuger Bit Extension – 5/16 in. Auger Bit Extension – 7/16 in. Cat. No. Six flats to fit drill chuck – Allen wrench included I I I I *Dual locking scews RESI-MASTER™ Augers Ship Heavy-Duty Auger Bit Extensions Auger Power Ship Augers - Bit Length = 18”, = 15”, Shank = 7/16”Twist Description Hole Overall Twist Cat. Diameter Length Length No. 35-820 35-821 35-822 35-823 35-824 35-825 35-826 35-827 35-828 35-829 35-817 35-810 35-811 35-812 35-813 35-814 35-815 35-816 35-862 35-864 35-866 35-868 1/2 in. 18 in. 15 in. www.idealindustries.com for Customer Service 1-800-435-0705 46 Heavy-duty lead screw designed for for designed Heavy-duty lead screw superior quick gripping power, life and extra-long penetration extended Re-sharpenable for tool life Dual-Helix construction with twin cutting edges construction with twin Dual-Helix action, even and smoother drilling faster provides nail-embedded timbers through dual induction heat treatment body, Full warping and minimizes durability, ensures long lasting performance delivers Designed to fit between wall studs when used with common drills Eliminates the need for right angle drills expensive C- 7/8 Mini™ Auger1 Mini™ Auger 7/8 in. 4-3/4 in. 2-1/2 in. 1 in. 4-3/4 in. 2-1/2 in. Mini™ Augers - Bit Length = 4-3/4” Description5/8 Mini™ Auger3/4 Mini™ Auger Diameter 5/8 in. Length 4-3/4 in. 3/4 in. 2-1/2 in. Length 4-3/4 in. 2-1/2 in. No. Twist = 2-1/2”, Shank = 7/16”Twist Hole Overall Twist Cat. 15/16 in. Power Ship Auger 1 in. Power Ship Auger 1-1/8 in. Power Ship Auger 1-1/4 in. Power Ship Auger 15/16 in. 18 in. 15 in. 1-1/8 in. 1 in. 18 in. 1-1/4 in. 18 in. 15 in. 18 in. 15 in. 15 in. 1/2 in. Power Ship Auger 5/8 in. Power Ship Auger 11/16 in. Power Ship Auger 3/4 in. Power Ship Auger 13/16 in. Power Ship Auger 7/8 in. Power Ship Auger 5/8 in. 11/16 in. 18 in. 18 in. 15 in. 15 in. 3/4 in. 13/16 in. 18 in. 18 in. 15 in. 15 in. 7/8 in. 18 in. 15 in. 7/8 in. Power Ship Auger 1 in. Power Ship Auger 1-1/8 in. Power Ship Auger 1-1/4 in. Power Ship Auger Power Ship Augers - Bit Length = 18”, = 15”, Shank = 7/16”Twist 7/8 in.Description 7-1/2 in. 1-1/8 in. in. 5 1 in. 7-1/2 in. 1-1/4 in. 5 in. 7-1/2 in. 7-1/2 in. 5 in. 5 in. Hole Overall Twist Cat. Diameter Length Length No. 5/8 in. Power Ship Auger 11/16 in. Power Ship Auger 3/4 in. Power Ship Auger 13/16 in. Power Ship Auger 5/8 in. 11/16 in. 7-1/2 in. 7-1/2 in. 5 in. 5 in. 3/4 in. 13/16 in. 7-1/2 in. 7-1/2 in. 5 in. 5 in. Power Ship Augers - Bit Length = 7-1/2”, Power Ship Augers - Bit Length = 5”, Shank = 7/16”Twist Description Hole Overall Twist Cat. Diameter Length Length No. I I I I Nailbiter™ Premium Ship Auger Bits Auger Ship Premium Nailbiter™ Mini™ Utility Bit Augers I I

Flexible Drill Bits Section C 26-50 10/23/08 3:54 PM Page 46 Page PM 3:54 10/23/08 C 26-50 Section Section C 26-50 10/23/08 3:54 PM Page 47

Tools and Totes

Flexible Drill Bits Flexible Bit Extensions

Professional drill bits drill and fish wire I Three lengths available for 3/16 in. in one easy step. Drill and pull wire and 1/4 in. shaft diameters through blind areas in ceilings, walls and I Connect to chuck end of shaft to increase the length of the bit floors. Shanks are made from premium heat-treated spring steel for maximum Description Shank Cat. No. flexibility while practically eliminating any retained shank bend. A three-flat 3/16 in. x 36 in. Flexible Bit Extension 3/16 90-170 non-slip grip on the shank and fish 3/16 in. x 54 in. Flexible Bit Extension 3/16 90-171 holes in both the tip and shank insure trouble-free wire pulling in either 1/4 in. x 36 in. Flexible Bit Extension 1/4 90-173 direction. Our tip design provides 1/4 in. x 54 in. Flexible Bit Extension 1/4 90-174 superior tip/shank contact, increasing the strength and durability of the braze Flexible Bit Placement Tool and preventing separation when striking nails or other obstructions. Multiple I Use as a positioning guide for the styles are available for a variety of flexible drill bits applications. I Aids in more accurate placement of bit tips within walls I Increases directional control during drilling

Premium heat-treated spring steel Description Cat. No. xible Drill Bits Flexible Bit Placement Tool 90-176 Fle Serrated Combination Flexible Bits, Type C Extra durable braze where shank meets tip I Multi-purpose versatile bit for clean holes I Designed for easy to medium wood drilling and light metal Best for Fish holes in tip and shank lighlight WOOD for easy wire pulling I Pressure is needed for starting & lighlight METAL and pulling the bit through the wood

Description Shank Cat. No. 1/4 in. x 54 in. Serrated Combination Flexible Bit 3/16 90-063 Screw Point 3/8 in. x 54 in. Serrated Combination Flexible Bit 3/16 90-067 Flexible Bits, Type B 1/2 in. x 54 in. Serrated Combination Flexible Bit 3/16 90-070 9/16 in. x 54 in. Serrated Combination Flexible Bit 3/16 90-073 I Fast and aggressive, self-starting bit Masonry Flexible Bits, Type M

I Ultra-sharp ground threads I Masonry drill bit provide increased pulling power Best for through obstructions WOOD I Designed for drilling in Best for lightweight masonry materials I Designed for easy to tough MASONRY wood drilling

Description Shank Cat. No. Description Shank Cat. No. 3/8 in. x 24 in. Screw Point Flexible Bit 3/16 90-080 3/8 in. x 54 in. Masonry Flexible Bit 3/16 90-124 3/8 in. x 36 in. Screw Point Flexible Bit 3/16 90-081 1/2 in. x 72 in. Masonry Flexible Bit 1/4 90-128 3/8 in. x 54 in. Screw Point Flexible Bit 3/16 90-082 Installer Bits 3/8 in. x 72 in. Screw Point Flexible Bit 3/16 90-083 1/2 in. x 36 in. Screw Point Flexible Bit 3/16 90-084 I Hole in fluted head 1/2 in. x 54 in. Screw Point Flexible Bit 3/16 90-085 for pulling wires through walls, ceiling and floors 1/2 in. x 72 in. Screw Point Flexible Bit 3/16 90-086 I Flutes designed for quick chip removal — no clogging or binding 9/16 in. x 36 in. Screw Point Flexible Bit 3/16 90-087 I Premium quality, extra-hard 52-100 carbon bearing steel 9/16 in. x 54 in. Screw Point Flexible Bit 3/16 90-088 Description Length Cat. No. 9/16 in. x 72 in. Screw Point Flexible Bit 3/16 90-089 3/4 in. x 36 in. Screw Point Flexible Bit 1/4 90-090 Installer Bit – 1/4 in. 18 in. 35-870 3/4 in. x 54 in. Screw Point Flexible Bit 1/4 90-091 Installer Bit – 3/8 in. 18 in. 35-871 3/4 in. x 72 in. Screw Point Flexible Bit 1/4 90-092 Installer Bit – 1/2 in. 18 in. 35-872

1-800-435-0705 for Customer Service www.idealindustries.com C-47

Section C 26-50 10/23/08 4:17 PM Page 48

Jab Saw Heavy-Duty Hacksaw

I Cushioned ergonomic grip for performance and comfort I Rugged frame provides lightweight rigidity and Includes replaceable bi-metal wallboard I exceptional control blade I Stores up to nine extra blades I Holds all reciprocating blades and hack- saw blades I Blades can be adjusted to 55° angle for flush cutting and Ergonomic grip I tensioned to 30,000 psi I Includes 12 in. x 24T bi-metal blade Hand T

Description Cat. No. Heavy-Duty Hacksaw 35-260 Description Cat. No. ools/ Jab Saw 35-275 Replacement blade 36-088 Ergonomic Hacksaw Sa

ws I Angled handle for easier cutting Folding Saw I Blade can easily be adjusted for flush cutting Light-weight, heavy-duty I I Easy tensioning wing-nut die cast construction keeps blades tight for straighter cuts Ergonomic rubber comfort grip I I Cushioned ergonomic grip for performance and comfort Blade safely and conveniently folds down in handle I I Includes 12 in. x 24T bi-metal blade I Accepts all standard 6 in. recip blades Description Cat. No. Description Cat. No. Ergonomic Hacksaw 35-261 Folding Saw 35-274

Mini Hacksaw Aviation Tin Snips I Heavy-duty die cast I Chrome-molybdenum steel frame forged blades for greater I Non-slip rubber comfort grip strength and durability I Accepts all standard hacksaw blades I Serrated edges provide a stable hold when cutting Description Cat. No. Labor-saving design for I Mini Hacksaw 35-259 easier cutting I Comfortable non-slip dual durometer grips Hacksaw Blades

Description Cat. No. I Bi-metal blades Straight Cut Aviation Tin Snips 35-001 provide strength, flexibility and longer life

Description Qty./Pack Cat. No. 12 in. x 18T Blades 10 35-271 12 in. x 24T Blades 10 35-272 12 in. x 32T Blades 10 35-273 12 in. x 18T Blades 100 35-262 12 in. x 24T Blades 100 35-263 12 in. x 32T Blades 100 35-264

C-48 www.idealindustries.com 1-800-435-0705 for Customer Service