4. Wait until the ON•OFF key comes on and stays on. Then 4. Test the key’s functionality again by attempting to control 5. Wait until the ON•OFF key comes on and stays on. Then Direct Code Entry TIPS: Each device key is associated with a type of device—the NOTES CH and VOL keys have dual functions: they can act as Problem: The device’s menu does not appear on the TV screen. a variety of the device’s functions. If the code that has navigation keys in menu systems as well as channel and • Make sure you have connected the device to your TV properly and Step 2: Program your remote release both keys. release both keys. Direct Code Entry lets you enter a code from the accompanying TV is preset to search for TVs, SAT•CBL•DTC for satellite Throughout the programming of each key, keep the remote Advanced Functions Troubleshooting been stored controls the majority of the device’s functions, volume controllers outside the menus. The CH keys also selected the correct input. (See your devices’ Owner’s Manuals for code list for your brand of device. It’s not as easy as the other receivers, cable boxes or digital TV converters (DTC), and pointed at the IR sensor of the device you are programming programming is complete. If the code stored does not give provide skip forward and skip back control for DVD players and proper connection procedures.) To use this universal remote with your home entertainment methods, but it’s potentially the fastest method. VCR•DVD for VCRs or DVD players. the remote to control. Code Retrieval 5. Point the remote directly at the maximum functionality, try another code. 6. Look at the number you circled for DVRs that support this functionality. Problem: The remote does not operate your device. system, fi rst you need to program it to control your devices. The ON•OFF key serves as an indicator light during • Make sure the remote is in the correct mode by pressing the front panel of the device you your device’s brand code number. TIP: Each device key is associated with a type of device—the TV Test the remote with the device to make sure the device Once you’ve programmed the remote to control your devices, • Make sure the remote is in the correct mode by pressing the There are four ways you can program the universal remote to programming, giving you feedback at each stage of the process. corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This want to control. Press PLAY on Press that number on the remote is preset to search for TVs, SAT•CBL•DTC for satellite receivers, key is programmed with the correct code for maximum GO BACK exits remote programming; it also performs the you may want to record the codes for future reference. If corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This operate your devices: tells the remote which device to operate. the remote and wait 5 seconds. keypad. cable boxes or digital TV converters (DTC), and VCR•DVD for The Manual Code Search method may take a long time because functionality. If some features don’t work, try a different same functions as on your original remotes you used the Direct Code Entry method, this is easy. Just tells the remote which device to operate. • Menu access isn’t supported for all brands. You may need to use the remote searches through all of the codes in its memory code. See the “Testing the Code for Maximum Functionality” fi nd the codes you entered and make a note of them in the Universal Remote Control • The Auto Code Search goes automatically through all the The remote is testing a batch of VCRs or DVD players. • Remove any obstacles between the remote and the device. Make your original remote control to access menu functions for some one-by-one. If your brand is listed in the Brand Codes or the section below for more information. The INPUT and — (dash) key has three functions: (1) it toggles boxes below. If you used one of the Code Search methods to codes for the device you’re trying to control. It’s the easiest 10 codes on your device. The ON•OFF key serves as an indicator light during sure you’re aiming the remote at the device’s IR sensor. Code Lists, fi rst try the Brand Code Search or the Direct Code through all the video sources connected to your TV; (2) when program your remote or if you used the Direct Entry method devices. Owner’s Manual method, but it can sometimes take longer than some of the programming, giving you feedback at each stage of the process. During the Manual Code Search, the remote ignores Brand Code Search Entry method. the remote is in VCR mode, this button toggles between VCR but don’t remember the code, you will need to retrieve each • Make sure the batteries are fresh and are properly installed. other programming methods. keypresses that aren’t part of the search. Replace the batteries with two new AA batteries, if necessary For more information, please visit www.rcaaccessories.com Did your device turn off? The Brand Code Search goes through only the codes for one of and the TV input; (3) when you’re entering digital channel device’s fi ve-digit code. Retrieving the actual code and writing RCR312WR / RCR311BR / RCR311BIR / 7. Point the remote directly at the To exit without saving a new code at any point in the Manual (see the Battery Installation section). the select brands listed in the accompanying code list. If your 1. Manually turn on the device you The search times out after two minutes (the ON•OFF key numbers directly, this button lets you separate the main it down will save you time if you ever need to program the Consumer Help Line: 1-800-420-7968 • The Brand Code Search searches through the codes for YES: Go to step 6. front panel of the device you want Code Search, press the GO BACK key. RCR311SR / RCR311STR brand of device is listed, this search can be very quick and easy. want to control. blinks four times and turns off, and the last programmed channel number from the sub-channel number (such as 59.1) remote again (e.g., if programming is lost when you change select brands of devices. It’s not as easy as the auto code to control. Press ON•OFF on the Problem: The remote can’t be programmed to operate your NO: Press PLAY again. The remote tests the next batch of code under that device key is retained). the batteries). If the codes are recorded, you can use the search, but it can be faster. remote and wait 2 seconds. The 1. Manually turn on the device you device. Manual del Propietario (parte posterior) 10 codes. TIPS: Each device key is associated with a type of device—the Direct Entry method to reprogram your remote to control your remote is testing a single code for want to control. The ON•OFF key blinks four times and turns off when the IMPORTANT • If you are testing the remote while programming it, you may be Care and Maintenance ...... , 1 • The Direct Code Entry lets you enter a code from the ...... 0 ...... 1006 ...... devices, which is quick and easy. TV is preset to search for TVs, SAT•CBL•DTC for satellite .. 675, ...... 11 ... 12, ... 08 ...... 1 ...... Keep pressing PLAY every 5 seconds until your device turns ...... Admiral ...... Advento ...... 10156, 107 remote has gone through all the codes. The remote exits the ...... Aik ...... ai ...... 10180, 100 too far away from the device or at a wrong angle. There must be your device’s brand...... Ak .. ... 0875, 1 ...... 0451, .. 1 ..... Albatronca Action...... 1 ... . • Keep the remote dry. If it gets wet, wipe it dry immediately...... Ameri ...... am ...... An al ...... C ..... git ...... AO ...... accompanying code list for your brand of device. It’s not as x ...... Find the Code List that came with Apex Diovo ...... receivers, cable boxes or digital TV converters (DTC), and ...... 2. izando Audi ...... o . . .. . Code Lists a ...... sed for programming using the Brand Code Searchresaltad ...... as, Aventur...... ell ...... off. arc w ...... o . . ... Axion ...... Codes are u ...... Manual Code Search. If your device hasn’t turned off yet, try ... and Entry method outlined in the User’s Guide. Bell & H...... Because this remote controls more than one device, you lizados paradigos programar de m util ...... an unobstructed path between the remote and the IR sensor on Brand ó ... c BenQ ord ...... son uti a de . .... as d uario. Bradf ...... arc ...... m ...... las Broksonicdle ...... Listae de Códigos an ale ...... squeda y entra C ...... igos d bú en la guía del us ...... • Use and store the remote only in normal temperature e ...... ON•OFF key Carniv .. .. s cód os d ...... easy as the other methods, but it’s potentially the fastest Lo tod Carver ...... VCR•DVD for VCRs or DVD players. mé ng ...... ho ... 1. Press and hold the device key the remote. Locate the section for s . Did your device turn off? lo Vizio Celera ...... s ...... on ..... List/Lista de Códigos de Marcas Chang ...... uti .. .. oshiba tizen ...... Ci al Sol ...... TV ony T larion rci C ...... Brand Code rpS omme ...... C certo . a different search method. the device. Move closer and make sure you point the remote at sung Sha n ...... must fi rst “tell” the remote which device you wish to m Co c ...... sonic Sa Conte ...... ox a nav Pan ...... Mag Craig ...... ips osley ...... Phil Cr n ... es .. JVC w th ...... Cro Ma ...... ia s ...... environments...... RCA Insign Curti ...... ba ...... method. GE hi ...... AN c .... (TV, SAT•CBL•DTC, VCR•DVD) the type of device you’re trying to SC oni h ...... PRO Symp . . VCR CXC ...... rp Sony Tos Cytron ...... 0123456789Sha ...... c Daewoo...... the device you’re trying to control. . ell . SAVE THIS MANUAL AND THE CODE LISTS! i Panasoni D on .... operate. That means, if you wish to operate your TV, you Mitsubish Den ...... Magnavox Diamond Visio. The ON•OFF key serves as an indicator light during C Philips mont JV Du Durabrand ...... RCA Samsung ba YES: Toshi Dwin Press the STOP key to store the code. You’re done! a If you’re programming the TV or SAT•CBL•DTC key, When your device turns off, press GE r ony Dynex ...... 2. SCAN S trog 6. PRO ec program, and fi nd your brand in D arp El roh whose code you wish to retrieve. • Handle the remote gently and carefully. Don’t drop it. DV lect sung Sh E Sam Emerso 0123456789 ...... mpr Panasonic Pioneer E Remote controls can sometimes lose their programming Magnavoxps Envi must fi rst press the TV key to put the remote in the TV Phili JVC ESA programming, giving you feedback at each stage of the process. Fi • If you’re using the Direct Entry programming method to enter ex • The Manual Code Search lets you manually go through CA Ap R F GE sonic ana NIO P You’ve programmed this device key. PROSCAN AM go to step 3. ox the REVERSE key on the remote nav ADB Mag tific Philips Testing the Code for Maximum Functionality that section. Circle the codes for n The ON•OFF key turns on. Keep Scie a 0123456789SAT/CABLEhes lant Hug rk At Netwo s • Keep the remote away from dust and dirt. ral em Gene ts Syst twork umen ish Ne / Instr D tems Sys when you change the batteries. Make sure you keep the ecTV Echostar Mode. The remote stays in that device mode until you press Dir the codes for your brand and the unit is still not functioning torola RCA Mo all the codes for the device you’re trying to control. E G N and wait at least 2 seconds. PROSCA your brand and keep them handy. 0123456789 pressing the device key. manual and code lists in a safe place so that you can To exit without saving a new code at any point in the Brand NO: Press ON•OFF again. The remote tests the next code If you’re programming the VCR•DVD key, you need to 1. Try a variety of the device’s functions with the remote. If a different device key. For example, if your remote is in TV properly, try the auto, brand, or manual search method. • Wipe the remote with a damp cloth occasionally to keep it The remote tries the last of the Code Search, press the GO BACK key. some features of your devices don’t work, go to the next reprogram the remote if you need to. for your brand. tell the remote which kind of device you want this key to Mode and you want to operate the DVD player, you must • To control combo units, like TV/VCRs or TV/DVDs, you must looking new. previous ten codes. 3. Press and hold the device key you want to program (the step to try a different code. Auto Code Search control, VCR or DVD. press the VCR•DVD key to change device modes. program the individual corresponding device keys to control • Modifying or tampering with the remote’s internal devices can Tip: This remote is already programmed to operate Keep pressing ON•OFF every 2 seconds until your device ON•OFF key comes on). The Auto Code Search goes automatically through all the Did your device turn on? 2. Repeat the Manual Code Search from the beginning. When 2. While holding the device key down, press and hold the each part of the combo unit. Once programmed successfully, the cause malfunction and invalidate its warranty. most RCA-branded TVs, VCRs, DVD players and satellite turns off. When it does, press STOP. Press and hold the VCR•DVD key. While you’re holding codes for the device you’re trying to control. When you fi nd While you’re holding down the device key, use your other the device turns off for the fi rst time, don’t press the STOP INFO key. The ON•OFF key turns off. After holding down TV key controls the TV functions, and the VCR•DVD key controls receivers. Just press the corresponding key—VCR•DVD YES: Press the STOP key. You’re 1. Manually turn on the device you down the VCR•DVD key, use your other hand to press the the one that operates your device, you can stop the search and hand enter the fi rst fi ve-digit code for your brand in the key, which would store the same code. Instead, with the both keys for three seconds, the ON•OFF key turns back the VCR or DVD functions. for a DVD player, TV for a television, SAT•CBL•DTC for a done! You’ve programmed this want to control. NOTES number key for the type of device you want to control with Backlighting store that code. device key. code list (the ON•OFF key goes off after the fi rst digit). this key: 2 for VCR, 3 for DVD. unit now off, continue to press the ON•OFF key repeatedly on. • Make sure the batteries are fresh and are properly installed. satellite receiver. Throughout the programming of each key, be sure to keep until the unit turns back on. Backlight illumination helps you see the remote control keys 3. Release both keys. The ON•OFF key remains on. TIPS: Each device key is associated with a type of device— NO: Press REVERSE again. The remote tests the next better in the dark. You can turn backlight illumination on or off the remote pointed at the IR sensor of the device you are 3. Once the unit turns back on, you have found another code Problem: The remote doesn’t perform commands properly. Limited Lifetime Warranty the TV is preset to search for TVs, SAT•CBL•DTC for satellite code in the batch. by pressing the backlight key ( ). Backlighting stays on as 4. Starting with the number 1 key, press and release each currently programming the remote to control. that operates the device. Press the STOP key. • Make sure the remote is in the correct mode by pressing the receivers, cable boxes or digital TV converters (DTC), and long as keys are being pressed and turns off six seconds after number key on the keypad in the following order: 1-9, then Keep pressing REVERSE every 2 seconds until your device 2. If you’re programming the TV or SAT•CBL•DTC key, Test the remote with the device to make sure the device corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This VCR•DVD for VCRs or DVD players. 4. Test the key’s functionality again by trying a variety of the last keypress. Once the backlight time has timed out, any 0. The number that causes the ON•OFF key to blink is the Audiovox Electronics Corporation (the “Company”) warrants to you the Step 1: Install your batteries turns back on. When it does, press STOP. go to step 3. key is programmed with the correct code for maximum tells the remote which device to operate. To exit without saving a new code at any point in the Auto functions. If the code controls the majority of the device’s keypress will reactivate it. If the backlight illumination is on, fi rst number of the code. As you fi nd each number of the original retail purchaser of this product that should it, under normal use Note: If you accidentally press the REVERSE key after your functionality. If some features don’t work, try a different Code Search, press the GO BACK key. If you’re programming the VCR•DVD key, you need to functions, programming is complete. If the code stored and you press the backlight key, the backlight turns off. code, write it down for future reference. • Make sure device is ready (for example, the DVD player has a and conditions, be proven defective in material or workmanship during Your universal remote requires two AA alkaline batteries device turns on, press the FORWARD key. Then, wait two tell the remote which kind of device you want this key to code. See the “Testing the Code for Maximum Functionality” does not give maximum functionality, try another code. disc loaded). its lifetime while you own it, such defect(s) will be repaired or replaced Note: All TV codes begin with the number 1; all VCR and DVR (at the Company’s option) without charge for parts and repair labor. To (batteries may or may not be included, depending on model). seconds to see if your device turns off again. control, VCR or DVD. section below for more information. • You may have pressed an invalid key for the mode the remote is in. 1. Manually turn on the device you codes begin with the number 2; all DVDs, the number 3; and obtain repair or replacement within the terms of this Warranty, the product To install the batteries: Press and hold the VCR•DVD key. While you’re holding During the Brand Code Search, the remote ignores all satellite receivers, cable boxes and DTV converters, the • If you’re trying to enter a channel number directly, try pressing is to be delivered with proof of warranty coverage (e.g. dated bill of sale), want to control. NOTES Accessing Device Menus and Guides down the VCR•DVD key, use your other hand to press the keypresses that aren’t part of the search. number 5. the ENTER key after entering the channel number as this is a specifi cation of defect(s), transportation prepaid, to the Company at the Remove the battery Tour of the Remote address shown below. 1. number key for the type of device you want to control with Many devices use on-screen menus and guides to help you requirement of certain models and brands. compartment cover. Throughout the programming of each key, be sure to keep The search times out after two minutes (the ON•OFF key navigate through all their features and programming. While 5. Repeat step 4 until you have retrieved all fi ve numbers in this key: 2 for VCR, 3 for DVD. • There is a possibility that a programmed code may only be This Warranty does not cover product purchased, serviced or used outside the remote pointed at the IR sensor of the device you are blinks four times and turns off, and the last programmed the code. After the fi fth number is retrieved, the ON•OFF the United States or Canada. This Warranty is not transferable and does In most cases, the keys on this remote may not access every menu or guide system able to control some of your device features (for example, only currently programming the remote to control. code under that device key is retained). 4. When you’ve fi nished entering the fi ve-digit code, keep of every device model, it does offer some menu and guide key blinks briefl y, then turns off. not extend to costs incurred for installation, removal or reinstallation of 2. Insert the batteries, matching 2. If you’re programming the TV or SAT•CBL•DTC key, 3. Press and hold the device key you want to program. While this remote perform the same turns a device on and off). To confi rm that the device key is holding down the device key and look at the ON•OFF key. functionality. the product. This Warranty does not apply if in the Company’s opinion, the batteries to the (+) and go to step 3. Test the remote with the device to make sure the The ON•OFF key blinks four times and turns off when the you’re holding down the device key, use your other hand to functions as the keys on your TIP: To exit the Code Retrieval Mode at any time, press the programmed with the correct code for maximum functionality, the product has been damaged through alteration, improper installation, (–) marks inside the battery remote has gone through all the codes. The remote exits the Is the ON•OFF key on? GO BACK key. test the device. Attempt to control a variety of the device’s If you’re programming the VCR•DVD key, you need to device key is programmed with the correct code for press and hold the remote’s ON•OFF key at the same time. original remotes once you’ve To use a device’s on-screen menu or guide system, you fi rst mishandling, misuse, neglect, accident, or the simultaneous use of different compartment. maximum functionality. If some features don’t work, try Brand Code Search. If your device hasn’t turned off yet, try a YES: You’re done! You’ve programmed this device key. programmed this remote to have to put the remote in Menu or Guide Mode. Note: If you press an invalid key during the Code Retrieval functions with the remote. If some of the features of your battery types (e.g. alkaline, standard or rechargeable). tell the remote which kind of device you want this key to devices don’t work, try programming the remote with a different a different code. See the “Testing the Code for Maximum different search method. operate your components. process, the remote will not respond. If you do not press a THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS control, VCR or DVD. NO, it blinked four times and turned off: You have 1. Make sure your devices are turned on and your TV is set code in the list using the Direct Code Entry Method, until you 3. Push the battery cover back into Functionality” section below for more information. Many keys on this remote valid Code Retrieval key (TV, SAT•CBL•DTC, VCR•DVD, INFO, LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO either entered a code number that is not in the code lists or to the correct device input (use the INPUT key to toggle fi nd the code that allows the remote to control the majority of EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE place. Press and hold the VCR•DVD key. While you’re holding have other functions as well. GO BACK), Code Retrieval times out after 15 seconds. The During the Auto Code Search, the remote ignores Testing the Code for Maximum Functionality missed a step in the code entry procedure. Try step 3 again. through inputs when in TV Mode.) your device’s functions. Different codes can provide different PAID BY PURCHASER FOR THE PRODUCT. down the VCR•DVD key, use your other hand to press the ON•OFF key blinks four times, and then turns off. number key for the type of device you want to control with keypresses that aren’t part of the search. Illuminated ON•OFF key 2. Press the device key whose menu you want to access. levels of functionality. This Warranty is in lieu of all other express warranties or liabilities. ANY 1. Try a variety of the device’s functions with the remote. If NOTES Battery Precautions: this key: 2 for VCR, 3 for DVD. serves as an indicator light to IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF some device features don’t work, go to the next step to try 3. To access menus, press the MENU key. To access guides, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL The search times out after two minutes (the ON•OFF key Remember to enter the code for future reference in the box provide feedback. TV CODE SAT•CBL•DTC CODE Problem: The ON•OFF key does not light when you press a key. • Do not mix old and new batteries. a different code. press the GUIDE key. The ON•OFF key starts blinking, BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL blinks four times and turns off, and the last programmed provided in the Code Retrieval section of this manual. • You may have pressed an invalid key for the mode the remote is indicating you are in Menu or Guide Mode. THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL • Do not mix alkaline, standard (carbon-zinc) or code under that device key is retained). 2. Repeat the Brand Code Search from the beginning. When 4. Wait until the ON•OFF key comes on and stays on. Then Device keys (TV, in. If your brand isn’t listed in the code list, use one of the Code 1 5 DAMAGES WHATSOEVER. No person or representative is authorized rechargeable (nickel-cadmium) batteries. the device turns off for the fi rst time, don’t press the STOP release both keys. SAT•CBL•DTC, VCR•DVD) put .. 4. Use the VOL+/- and CH+/- keys to to assume for the Company any liability other than expressed herein in ...... 10060, 1 ...... , ...... • Make sure the remote is in the correct mode by pressing the .... 75 ...... 16 .. ... 2, 1 ...... iral ...... Search methods to program the remote control. (Refer to the The ON•OFF key blinks four times and turns off when the t ...... 1081.. . Adm ...... • Always remove old, weak or worn-out batteries promptly Adven...... 156, 107 ...... 10 Aiko ...... 1 rch i . ... n ...... 5, a Aka o 7 atron ...... 108 Alb ...... 10451,.... 10180,...... 100 key, which would store the same code. Instead, with the . the remote in the right mode connection with the sale of this product. d Code Se ...... ran ...... B America Acti ...... uide...... navigate through the on-screen Anam ...... corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This Find your device’s brand in the AOC ...... 3. pex Digitalox ...... A ov ...... ed in the User’s G ...... tlin Audi ...... Codeou Lists tado ra ...... sal ...... ntu ...... Auto and Manual Code Search methods.) remote has gone through all the codes. The remote exits ethod s, re ...... m a Ave ...... arc ..... and recycle or dispose of them in accordance with Local m Axion ...... Entry . d s de ...... SAT CABLE DTV CONVERTER ...... an igo Bell & Howell...... Brand Codes are used for programming using the ...... cód . BenQ ...... Point the remote directly at the front panel of the device you de ford ...... a ario rad nic ...... 5. . unit now off, continue to press the ON•OFF key repeatedly ad su B ...... to control your device. tr u ...... en el kso ...... a d Bro e ...... Lista deda y uCódigosí ...... menu system or guide. To select the .. Some states/provinces do not allow limitations on how long an implied . tells the remote which device to operate. s de las marcassque son utilizados para programarigos de utilizando Marcas Candlivale .. . Brand Code list section of the o bú en la g arn ...... de C er s rv ...... Los códigtodo Ca ...... los mé o Celera ...... ons ...... Changhongen ...... i .. the Auto Code Search. If your device hasn’t turned off yet, oshiba Vizi z ...... Citi n ial Solut...... and National Regulations. TV ony T ario erc ...... Cl m ...... rp S m ...... Brand Code List/Lista de Cód Sha Co ...... g ...... sun oncerto . .... want to control. Press ON•OFF on the remote and wait 2 Sam C ec ...... c until the unit turns back on...... warranty lasts or the exclusion or limitation of incidental or consequential asoni Cont ... x Pan Magnavo Craig ...... highlighted item, press the OK key. hilips ...... P Crosleywn ...... If you release the device key any time during the Direct Code accompanying code list. Circle JVC o ...... Cr ... . tis Mathes...... CA Insignia ...... R Cur ...... • Make sure the batteries are fresh and are properly installed. GE ...... AN ...... ROSC phonic ...... try a different search method. P Sym ...... Sony Toshiba CXC . n Backlight key ( ) turns VCR ro ...... 0123456789 Cyt damage so the above limitations or exclusions may not apply to you. This Daewoo o seconds. The remote is testing a single code for your device. Dell ...... d Visi Mitsubishi Panasonic Sharp Denonon ...... Magnavox iam t .... ips D Phil JVC Dumon .. Entry procedure, the ON•OFF key blinks four times, and the number for your brand and . ung Durabrand ...... RCA Sams a n .. Replace the batteries with two new AA batteries, if necessary shib Dwi GE To 3. ny Once the unit turns back on, you have found another code TIP: If the remote doesn’t respond, CAN So Dynex .... PROS Electrogra Sharp VCR•DVD CODE DVD o Warranty gives you specifi c legal rights and you may also have other rights, g Electroh backlighting on/off. n rs 0123456789Samsu 9 Eme eer .... Pion .... ic . r ason p Pan Em nvi Magnavoxps 678 E Phili JVC 5 ESA Fi the process is exited. The last programmed code under the keep the list handy. x RCA Ape (see the Battery Installation section). F Battery Saver nic GE aso Pan ROSCAN AMNIO that operates the device. Press the STOP key. check to see that the ON•OFF key is P which vary from state/province to state/province. 234 navox ADB 1 Mag Philips 0 Scientificta SAT/CABLE tlan Hughesrk A Netwo General Systems Did your device turn off? truments Dish Networkms/ Ins Syste r hosta recTV Ec 56789 device key is retained. 4 RCA Motorola Di GUIDE and MENU put the GE AN ROSC still blinking. The ON•OFF key times Your universal remote control saves battery power by P 23 1 U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, 0 4. Test the key’s functionality again by attempting to control automatically turning off if any key is pressed for more than YES: Press the STOP key to store remote in menu/guide mode, out after 20 seconds. If this happens, Problem: The remote will not change channels on device. New York 11788 a variety of the device’s functions. If the code that has Test the remote with the device to make sure the device 60 seconds. This saves your battery life should your remote Testing the Code for Maximum Functionality the code. You’re done! You’ve which makes the CH/VOL just press the MENU key again, and • Make sure the remote is in the correct mode by pressing the CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, been stored controls the majority of the device’s functions, key is programmed with the correct code for maximum programmed this device key. keys serve as arrow keys; then retry your selection. DVD VCR corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This Unit 3, Door 16, Mississauga, Ontario L5T 3A5 get stuck in a place where the keys remain depressed, such as 1. Try a variety of the device’s functions with the remote. If 4. Press and hold the device key you want to program. While functionality. If some features don’t work, try a different code programming is complete. If the code stored does not give they also access the same tells the remote which device to operate. between sofa cushions. 3. Press and hold the device key you want to program. While some device features don’t work, go to next step to try a you’re holding down the device key, use your other hand in the list. maximum functionality, try another code. NO: Press ON•OFF again. The features as the keys on your you’re holding down the device key, use your other hand different code. to press and hold the remote’s ON•OFF key at the same • Press the ENTER key after you enter a channel number. remote tests the next code for original remotes. Exiting Menu/Guide Mode to press and hold the remote’s ON•OFF key at the same 2. Repeat the Auto Code Search Method from the beginning. time. your device. • Remove any obstacles between the remote and the device. Make The remote automatically times out of Menu or Guide Mode time. When your device turns off, do not stop searching. sure to aim the remote at the IR sensor on the device. Manual Code Search Keep pressing ON•OFF every 2 after 20 seconds of inactivity (no keys being pressed). At that Instead, with the unit now off, continue to press the PLAY ©2010 Audiovox Accessories Corporation key every 5 seconds until the unit turns back on. The Manual Code Search lets you go one-by-one through all the seconds until your device turns back time, the remote clears the displayed menu from the TV. Actual model may vary 111 Congressional Blvd., Suite 350 codes for the device you’re trying to control. When you fi nd the on. When it does, press STOP. 3. Once the unit turns back on, press the REVERSE key on the from illustration If you want to exit the Menu Mode yourself, press the Carmel, IN 46032 one that operates your device, you can stop the search and store remote every 2 seconds until your device turns off again. TIP: Because there are so many codes, you may have to press corresponding device key on the remote (TV, SAT•CBL•DTC, that code. VCR•DVD). The ON•OFF key turns off. Trademark(s) ® Registered When your device turns off again, press the STOP key. the ON•OFF key many times—possibly hundreds of times. RCR312WR US 06 4. Wait until the ON•OFF key comes on and stays on. Then 4. Test the key’s functionality again by attempting to control 5. Wait until the ON•OFF key comes on and stays on. Then Direct Code Entry TIPS: Each device key is associated with a type of device—the NOTES CH and VOL keys have dual functions: they can act as Problem: The device’s menu does not appear on the TV screen. a variety of the device’s functions. If the code that has navigation keys in menu systems as well as channel and • Make sure you have connected the device to your TV properly and Step 2: Program your remote release both keys. release both keys. Direct Code Entry lets you enter a code from the accompanying TV is preset to search for TVs, SAT•CBL•DTC for satellite Throughout the programming of each key, keep the remote Advanced Functions Troubleshooting been stored controls the majority of the device’s functions, volume controllers outside the menus. The CH keys also selected the correct input. (See your devices’ Owner’s Manuals for code list for your brand of device. It’s not as easy as the other receivers, cable boxes or digital TV converters (DTC), and pointed at the IR sensor of the device you are programming programming is complete. If the code stored does not give provide skip forward and skip back control for DVD players and proper connection procedures.) To use this universal remote with your home entertainment methods, but it’s potentially the fastest method. VCR•DVD for VCRs or DVD players. the remote to control. Code Retrieval 5. Point the remote directly at the maximum functionality, try another code. 6. Look at the number you circled for DVRs that support this functionality. Problem: The remote does not operate your device. system, fi rst you need to program it to control your devices. The ON•OFF key serves as an indicator light during • Make sure the remote is in the correct mode by pressing the front panel of the device you your device’s brand code number. TIP: Each device key is associated with a type of device—the TV Test the remote with the device to make sure the device Once you’ve programmed the remote to control your devices, • Make sure the remote is in the correct mode by pressing the There are four ways you can program the universal remote to programming, giving you feedback at each stage of the process. corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This want to control. Press PLAY on Press that number on the remote is preset to search for TVs, SAT•CBL•DTC for satellite receivers, key is programmed with the correct code for maximum GO BACK exits remote programming; it also performs the you may want to record the codes for future reference. If corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This operate your devices: tells the remote which device to operate. the remote and wait 5 seconds. keypad. cable boxes or digital TV converters (DTC), and VCR•DVD for The Manual Code Search method may take a long time because functionality. If some features don’t work, try a different same functions as on your original remotes you used the Direct Code Entry method, this is easy. Just tells the remote which device to operate. • Menu access isn’t supported for all brands. You may need to use the remote searches through all of the codes in its memory code. See the “Testing the Code for Maximum Functionality” fi nd the codes you entered and make a note of them in the Universal Remote Control • The Auto Code Search goes automatically through all the The remote is testing a batch of VCRs or DVD players. • Remove any obstacles between the remote and the device. Make your original remote control to access menu functions for some one-by-one. If your brand is listed in the Brand Codes or the section below for more information. The INPUT and — (dash) key has three functions: (1) it toggles boxes below. If you used one of the Code Search methods to codes for the device you’re trying to control. It’s the easiest 10 codes on your device. The ON•OFF key serves as an indicator light during sure you’re aiming the remote at the device’s IR sensor. Code Lists, fi rst try the Brand Code Search or the Direct Code through all the video sources connected to your TV; (2) when program your remote or if you used the Direct Entry method devices. Owner’s Manual method, but it can sometimes take longer than some of the programming, giving you feedback at each stage of the process. During the Manual Code Search, the remote ignores Brand Code Search Entry method. the remote is in VCR mode, this button toggles between VCR but don’t remember the code, you will need to retrieve each • Make sure the batteries are fresh and are properly installed. other programming methods. keypresses that aren’t part of the search. Replace the batteries with two new AA batteries, if necessary For more information, please visit www.rcaaccessories.com Did your device turn off? The Brand Code Search goes through only the codes for one of and the TV input; (3) when you’re entering digital channel device’s fi ve-digit code. Retrieving the actual code and writing RCR312WR / RCR311BR / RCR311BIR / 7. Point the remote directly at the To exit without saving a new code at any point in the Manual (see the Battery Installation section). the select brands listed in the accompanying code list. If your 1. Manually turn on the device you The search times out after two minutes (the ON•OFF key numbers directly, this button lets you separate the main it down will save you time if you ever need to program the Consumer Help Line: 1-800-420-7968 • The Brand Code Search searches through the codes for YES: Go to step 6. front panel of the device you want Code Search, press the GO BACK key. RCR311SR / RCR311STR brand of device is listed, this search can be very quick and easy. want to control. blinks four times and turns off, and the last programmed channel number from the sub-channel number (such as 59.1) remote again (e.g., if programming is lost when you change select brands of devices. It’s not as easy as the auto code to control. Press ON•OFF on the Problem: The remote can’t be programmed to operate your NO: Press PLAY again. The remote tests the next batch of code under that device key is retained). the batteries). If the codes are recorded, you can use the search, but it can be faster. remote and wait 2 seconds. The 1. Manually turn on the device you device. Manual del Propietario (parte posterior) 10 codes. TIPS: Each device key is associated with a type of device—the Direct Entry method to reprogram your remote to control your remote is testing a single code for want to control. The ON•OFF key blinks four times and turns off when the IMPORTANT • If you are testing the remote while programming it, you may be Care and Maintenance ...... , 1 • The Direct Code Entry lets you enter a code from the ...... 0 ...... 1006 ...... devices, which is quick and easy. TV is preset to search for TVs, SAT•CBL•DTC for satellite .. 675, ...... 11 ... 12, ... 08 ...... 1 ...... Keep pressing PLAY every 5 seconds until your device turns ...... Admiral ...... Advento ...... 10156, 107 remote has gone through all the codes. The remote exits the ...... Aik ...... ai ...... 10180, 100 too far away from the device or at a wrong angle. There must be your device’s brand...... Ak .. ... 0875, 1 ...... 0451, .. 1 ..... Albatronca Action...... 1 ... . • Keep the remote dry. If it gets wet, wipe it dry immediately...... Ameri ...... am ...... An al ...... C ..... git ...... AO ...... accompanying code list for your brand of device. It’s not as x ...... Find the Code List that came with Apex Diovo ...... receivers, cable boxes or digital TV converters (DTC), and ...... 2. izando Audi ...... o . . .. . Code Lists a ...... sed for programming using the Brand Code Searchresaltad ...... as, Aventur...... ell ...... off. arc w ...... o . . ... Axion ...... Codes are u ...... Manual Code Search. If your device hasn’t turned off yet, try ... and Entry method outlined in the User’s Guide. Bell & H...... Because this remote controls more than one device, you lizados paradigos programar de m util ...... an unobstructed path between the remote and the IR sensor on Brand ó ... c BenQ ord ...... son uti a de . .... as d uario. Bradf ...... arc ...... m ...... las Broksonicdle ...... Listae de Códigos an ale ...... squeda y entra C ...... igos d bú en la guía del us ...... • Use and store the remote only in normal temperature e ...... ON•OFF key Carniv .. .. s cód os d ...... easy as the other methods, but it’s potentially the fastest Lo tod Carver ...... VCR•DVD for VCRs or DVD players. mé ng ...... ho ... 1. Press and hold the device key the remote. Locate the section for s . Did your device turn off? lo Vizio Celera ...... s ...... on ..... List/Lista de Códigos de Marcas Chang ...... uti .. .. oshiba tizen ...... Ci al Sol ...... TV ony T larion rci C ...... Brand Code rpS omme ...... C certo . a different search method. the device. Move closer and make sure you point the remote at sung Sha n ...... must fi rst “tell” the remote which device you wish to m Co c ...... sonic Sa Conte ...... ox a nav Pan ...... Mag Craig ...... ips osley ...... Phil Cr n ... es .. JVC w th ...... Cro Ma ...... ia s ...... environments...... RCA Insign Curti ...... ba ...... method. GE hi ...... AN c .... (TV, SAT•CBL•DTC, VCR•DVD) the type of device you’re trying to SC oni h ...... PRO Symp . . VCR CXC ...... rp Sony Tos Cytron ...... 0123456789Sha ...... c Daewoo...... the device you’re trying to control. . ell . SAVE THIS MANUAL AND THE CODE LISTS! i Panasoni D on .... operate. That means, if you wish to operate your TV, you Mitsubish Den ...... Magnavox Diamond Visio. The ON•OFF key serves as an indicator light during C Philips mont JV Du Durabrand ...... RCA Samsung ba YES: Toshi Dwin Press the STOP key to store the code. You’re done! a If you’re programming the TV or SAT•CBL•DTC key, When your device turns off, press GE r ony Dynex ...... 2. SCAN S trog 6. PRO ec program, and fi nd your brand in D arp El roh whose code you wish to retrieve. • Handle the remote gently and carefully. Don’t drop it. DV lect sung Sh E Sam Emerso 0123456789 ...... mpr Panasonic Pioneer E Remote controls can sometimes lose their programming Magnavoxps Envi must fi rst press the TV key to put the remote in the TV Phili JVC ESA programming, giving you feedback at each stage of the process. Fi • If you’re using the Direct Entry programming method to enter ex • The Manual Code Search lets you manually go through CA Ap R F GE sonic ana NIO P You’ve programmed this device key. PROSCAN AM go to step 3. ox the REVERSE key on the remote nav ADB Mag tific Philips Testing the Code for Maximum Functionality that section. Circle the codes for n The ON•OFF key turns on. Keep Scie a 0123456789SAT/CABLEhes lant Hug rk At Netwo s • Keep the remote away from dust and dirt. ral em Gene ts Syst twork umen ish Ne / Instr D tems Sys when you change the batteries. Make sure you keep the ecTV Echostar Mode. The remote stays in that device mode until you press Dir the codes for your brand and the unit is still not functioning torola RCA Mo all the codes for the device you’re trying to control. E G N and wait at least 2 seconds. PROSCA your brand and keep them handy. 0123456789 pressing the device key. manual and code lists in a safe place so that you can To exit without saving a new code at any point in the Brand NO: Press ON•OFF again. The remote tests the next code If you’re programming the VCR•DVD key, you need to 1. Try a variety of the device’s functions with the remote. If a different device key. For example, if your remote is in TV properly, try the auto, brand, or manual search method. • Wipe the remote with a damp cloth occasionally to keep it The remote tries the last of the Code Search, press the GO BACK key. some features of your devices don’t work, go to the next reprogram the remote if you need to. for your brand. tell the remote which kind of device you want this key to Mode and you want to operate the DVD player, you must • To control combo units, like TV/VCRs or TV/DVDs, you must looking new. previous ten codes. 3. Press and hold the device key you want to program (the step to try a different code. Auto Code Search control, VCR or DVD. press the VCR•DVD key to change device modes. program the individual corresponding device keys to control • Modifying or tampering with the remote’s internal devices can Tip: This remote is already programmed to operate Keep pressing ON•OFF every 2 seconds until your device ON•OFF key comes on). The Auto Code Search goes automatically through all the Did your device turn on? 2. Repeat the Manual Code Search from the beginning. When 2. While holding the device key down, press and hold the each part of the combo unit. Once programmed successfully, the cause malfunction and invalidate its warranty. most RCA-branded TVs, VCRs, DVD players and satellite turns off. When it does, press STOP. Press and hold the VCR•DVD key. While you’re holding codes for the device you’re trying to control. When you fi nd While you’re holding down the device key, use your other the device turns off for the fi rst time, don’t press the STOP INFO key. The ON•OFF key turns off. After holding down TV key controls the TV functions, and the VCR•DVD key controls receivers. Just press the corresponding key—VCR•DVD YES: Press the STOP key. You’re 1. Manually turn on the device you down the VCR•DVD key, use your other hand to press the the one that operates your device, you can stop the search and hand enter the fi rst fi ve-digit code for your brand in the key, which would store the same code. Instead, with the both keys for three seconds, the ON•OFF key turns back the VCR or DVD functions. for a DVD player, TV for a television, SAT•CBL•DTC for a done! You’ve programmed this want to control. NOTES number key for the type of device you want to control with Backlighting store that code. device key. code list (the ON•OFF key goes off after the fi rst digit). this key: 2 for VCR, 3 for DVD. unit now off, continue to press the ON•OFF key repeatedly on. • Make sure the batteries are fresh and are properly installed. satellite receiver. Throughout the programming of each key, be sure to keep until the unit turns back on. Backlight illumination helps you see the remote control keys 3. Release both keys. The ON•OFF key remains on. TIPS: Each device key is associated with a type of device— NO: Press REVERSE again. The remote tests the next better in the dark. You can turn backlight illumination on or off the remote pointed at the IR sensor of the device you are 3. Once the unit turns back on, you have found another code Problem: The remote doesn’t perform commands properly. Limited Lifetime Warranty the TV is preset to search for TVs, SAT•CBL•DTC for satellite code in the batch. by pressing the backlight key ( ). Backlighting stays on as 4. Starting with the number 1 key, press and release each currently programming the remote to control. that operates the device. Press the STOP key. • Make sure the remote is in the correct mode by pressing the receivers, cable boxes or digital TV converters (DTC), and long as keys are being pressed and turns off six seconds after number key on the keypad in the following order: 1-9, then Keep pressing REVERSE every 2 seconds until your device 2. If you’re programming the TV or SAT•CBL•DTC key, Test the remote with the device to make sure the device corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This VCR•DVD for VCRs or DVD players. 4. Test the key’s functionality again by trying a variety of the last keypress. Once the backlight time has timed out, any 0. The number that causes the ON•OFF key to blink is the Audiovox Electronics Corporation (the “Company”) warrants to you the Step 1: Install your batteries turns back on. When it does, press STOP. go to step 3. key is programmed with the correct code for maximum tells the remote which device to operate. To exit without saving a new code at any point in the Auto functions. If the code controls the majority of the device’s keypress will reactivate it. If the backlight illumination is on, fi rst number of the code. As you fi nd each number of the original retail purchaser of this product that should it, under normal use Note: If you accidentally press the REVERSE key after your functionality. If some features don’t work, try a different Code Search, press the GO BACK key. If you’re programming the VCR•DVD key, you need to functions, programming is complete. If the code stored and you press the backlight key, the backlight turns off. code, write it down for future reference. • Make sure device is ready (for example, the DVD player has a and conditions, be proven defective in material or workmanship during Your universal remote requires two AA alkaline batteries device turns on, press the FORWARD key. Then, wait two tell the remote which kind of device you want this key to code. See the “Testing the Code for Maximum Functionality” does not give maximum functionality, try another code. disc loaded). its lifetime while you own it, such defect(s) will be repaired or replaced Note: All TV codes begin with the number 1; all VCR and DVR (at the Company’s option) without charge for parts and repair labor. To (batteries may or may not be included, depending on model). seconds to see if your device turns off again. control, VCR or DVD. section below for more information. • You may have pressed an invalid key for the mode the remote is in. 1. Manually turn on the device you codes begin with the number 2; all DVDs, the number 3; and obtain repair or replacement within the terms of this Warranty, the product To install the batteries: Press and hold the VCR•DVD key. While you’re holding During the Brand Code Search, the remote ignores all satellite receivers, cable boxes and DTV converters, the • If you’re trying to enter a channel number directly, try pressing is to be delivered with proof of warranty coverage (e.g. dated bill of sale), want to control. NOTES Accessing Device Menus and Guides down the VCR•DVD key, use your other hand to press the keypresses that aren’t part of the search. number 5. the ENTER key after entering the channel number as this is a specifi cation of defect(s), transportation prepaid, to the Company at the Remove the battery Tour of the Remote address shown below. 1. number key for the type of device you want to control with Many devices use on-screen menus and guides to help you requirement of certain models and brands. compartment cover. Throughout the programming of each key, be sure to keep The search times out after two minutes (the ON•OFF key navigate through all their features and programming. While 5. Repeat step 4 until you have retrieved all fi ve numbers in this key: 2 for VCR, 3 for DVD. • There is a possibility that a programmed code may only be This Warranty does not cover product purchased, serviced or used outside the remote pointed at the IR sensor of the device you are blinks four times and turns off, and the last programmed the code. After the fi fth number is retrieved, the ON•OFF the United States or Canada. This Warranty is not transferable and does In most cases, the keys on this remote may not access every menu or guide system able to control some of your device features (for example, only currently programming the remote to control. code under that device key is retained). 4. When you’ve fi nished entering the fi ve-digit code, keep of every device model, it does offer some menu and guide key blinks briefl y, then turns off. not extend to costs incurred for installation, removal or reinstallation of 2. Insert the batteries, matching 2. If you’re programming the TV or SAT•CBL•DTC key, 3. Press and hold the device key you want to program. While this remote perform the same turns a device on and off). To confi rm that the device key is holding down the device key and look at the ON•OFF key. functionality. the product. This Warranty does not apply if in the Company’s opinion, the batteries to the (+) and go to step 3. Test the remote with the device to make sure the The ON•OFF key blinks four times and turns off when the you’re holding down the device key, use your other hand to functions as the keys on your TIP: To exit the Code Retrieval Mode at any time, press the programmed with the correct code for maximum functionality, the product has been damaged through alteration, improper installation, (–) marks inside the battery remote has gone through all the codes. The remote exits the Is the ON•OFF key on? GO BACK key. test the device. Attempt to control a variety of the device’s If you’re programming the VCR•DVD key, you need to device key is programmed with the correct code for press and hold the remote’s ON•OFF key at the same time. original remotes once you’ve To use a device’s on-screen menu or guide system, you fi rst mishandling, misuse, neglect, accident, or the simultaneous use of different compartment. maximum functionality. If some features don’t work, try Brand Code Search. If your device hasn’t turned off yet, try a YES: You’re done! You’ve programmed this device key. programmed this remote to have to put the remote in Menu or Guide Mode. Note: If you press an invalid key during the Code Retrieval functions with the remote. If some of the features of your battery types (e.g. alkaline, standard or rechargeable). tell the remote which kind of device you want this key to devices don’t work, try programming the remote with a different a different code. See the “Testing the Code for Maximum different search method. operate your components. process, the remote will not respond. If you do not press a THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS control, VCR or DVD. NO, it blinked four times and turned off: You have 1. Make sure your devices are turned on and your TV is set code in the list using the Direct Code Entry Method, until you 3. Push the battery cover back into Functionality” section below for more information. Many keys on this remote valid Code Retrieval key (TV, SAT•CBL•DTC, VCR•DVD, INFO, LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO either entered a code number that is not in the code lists or to the correct device input (use the INPUT key to toggle fi nd the code that allows the remote to control the majority of EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE place. Press and hold the VCR•DVD key. While you’re holding have other functions as well. GO BACK), Code Retrieval times out after 15 seconds. The During the Auto Code Search, the remote ignores Testing the Code for Maximum Functionality missed a step in the code entry procedure. Try step 3 again. through inputs when in TV Mode.) your device’s functions. Different codes can provide different PAID BY PURCHASER FOR THE PRODUCT. down the VCR•DVD key, use your other hand to press the ON•OFF key blinks four times, and then turns off. number key for the type of device you want to control with keypresses that aren’t part of the search. Illuminated ON•OFF key 2. Press the device key whose menu you want to access. levels of functionality. This Warranty is in lieu of all other express warranties or liabilities. ANY 1. Try a variety of the device’s functions with the remote. If NOTES Battery Precautions: this key: 2 for VCR, 3 for DVD. serves as an indicator light to IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF some device features don’t work, go to the next step to try 3. To access menus, press the MENU key. To access guides, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL The search times out after two minutes (the ON•OFF key Remember to enter the code for future reference in the box provide feedback. TV CODE SAT•CBL•DTC CODE Problem: The ON•OFF key does not light when you press a key. • Do not mix old and new batteries. a different code. press the GUIDE key. The ON•OFF key starts blinking, BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL blinks four times and turns off, and the last programmed provided in the Code Retrieval section of this manual. • You may have pressed an invalid key for the mode the remote is indicating you are in Menu or Guide Mode. THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL • Do not mix alkaline, standard (carbon-zinc) or code under that device key is retained). 2. Repeat the Brand Code Search from the beginning. When 4. Wait until the ON•OFF key comes on and stays on. Then Device keys (TV, in. If your brand isn’t listed in the code list, use one of the Code 1 5 DAMAGES WHATSOEVER. No person or representative is authorized rechargeable (nickel-cadmium) batteries. the device turns off for the fi rst time, don’t press the STOP release both keys. SAT•CBL•DTC, VCR•DVD) put .. 4. Use the VOL+/- and CH+/- keys to to assume for the Company any liability other than expressed herein in ...... 10060, 1 ...... , ...... • Make sure the remote is in the correct mode by pressing the .... 75 ...... 16 .. ... 2, 1 ...... iral ...... Search methods to program the remote control. (Refer to the The ON•OFF key blinks four times and turns off when the t ...... 1081.. . Adm ...... • Always remove old, weak or worn-out batteries promptly Adven...... 156, 107 ...... 10 Aiko ...... 1 rch i . ... n ...... 5, a Aka o 7 atron ...... 108 Alb ...... 10451,.... 10180,...... 100 key, which would store the same code. Instead, with the . the remote in the right mode connection with the sale of this product. d Code Se ...... ran ...... B America Acti ...... uide...... navigate through the on-screen Anam ...... corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This Find your device’s brand in the AOC ...... 3. pex Digitalox ...... A ov ...... ed in the User’s G ...... tlin Audi ...... Codeou Lists tado ra ...... sal ...... ntu ...... Auto and Manual Code Search methods.) remote has gone through all the codes. The remote exits ethod s, re ...... m a Ave ...... arc ..... and recycle or dispose of them in accordance with Local m Axion ...... Entry . d s de ...... SAT CABLE DTV CONVERTER ...... an igo Bell & Howell...... Brand Codes are used for programming using the ...... cód . BenQ ...... Point the remote directly at the front panel of the device you de ford ...... a ario rad nic ...... 5. . unit now off, continue to press the ON•OFF key repeatedly ad su B ...... to control your device. tr u ...... en el kso ...... a d Bro e ...... Lista deda y uCódigosí ...... menu system or guide. To select the .. Some states/provinces do not allow limitations on how long an implied . tells the remote which device to operate. s de las marcassque son utilizados para programarigos de utilizando Marcas Candlivale .. . Brand Code list section of the o bú en la g arn ...... de C er s rv ...... Los códigtodo Ca ...... los mé o Celera ...... ons ...... Changhongen ...... i .. the Auto Code Search. If your device hasn’t turned off yet, oshiba Vizi z ...... Citi n ial Solut...... and National Regulations. TV ony T ario erc ...... Cl m ...... rp S m ...... Brand Code List/Lista de Cód Sha Co ...... g ...... sun oncerto . .... want to control. Press ON•OFF on the remote and wait 2 Sam C ec ...... c until the unit turns back on...... warranty lasts or the exclusion or limitation of incidental or consequential asoni Cont ... x Pan Magnavo Craig ...... highlighted item, press the OK key. hilips ...... P Crosleywn ...... If you release the device key any time during the Direct Code accompanying code list. Circle JVC o ...... Cr ... . tis Mathes...... CA Insignia ...... R Cur ...... • Make sure the batteries are fresh and are properly installed. GE ...... AN ...... ROSC phonic ...... try a different search method. P Sym ...... Sony Toshiba CXC . n Backlight key ( ) turns VCR ro ...... 0123456789 Cyt damage so the above limitations or exclusions may not apply to you. This Daewoo o seconds. The remote is testing a single code for your device. Dell ...... d Visi Mitsubishi Panasonic Sharp Denonon ...... Magnavox iam t .... ips D Phil JVC Dumon .. Entry procedure, the ON•OFF key blinks four times, and the number for your brand and . ung Durabrand ...... RCA Sams a n .. Replace the batteries with two new AA batteries, if necessary shib Dwi GE To 3. ny Once the unit turns back on, you have found another code TIP: If the remote doesn’t respond, CAN So Dynex .... PROS Electrogra Sharp VCR•DVD CODE DVD o Warranty gives you specifi c legal rights and you may also have other rights, g Electroh backlighting on/off. n rs 0123456789Samsu 9 Eme eer .... Pion .... ic . r ason p Pan Em nvi Magnavoxps 678 E Phili JVC 5 ESA Fi the process is exited. The last programmed code under the keep the list handy. x RCA Ape (see the Battery Installation section). F Battery Saver nic GE aso Pan ROSCAN AMNIO that operates the device. Press the STOP key. check to see that the ON•OFF key is P which vary from state/province to state/province. 234 navox ADB 1 Mag Philips 0 Scientificta SAT/CABLE tlan Hughesrk A Netwo General Systems Did your device turn off? truments Dish Networkms/ Ins Syste r hosta recTV Ec 56789 device key is retained. 4 RCA Motorola Di GUIDE and MENU put the GE AN ROSC still blinking. The ON•OFF key times Your universal remote control saves battery power by P 23 1 U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, 0 4. Test the key’s functionality again by attempting to control automatically turning off if any key is pressed for more than YES: Press the STOP key to store remote in menu/guide mode, out after 20 seconds. If this happens, Problem: The remote will not change channels on device. New York 11788 a variety of the device’s functions. If the code that has Test the remote with the device to make sure the device 60 seconds. This saves your battery life should your remote Testing the Code for Maximum Functionality the code. You’re done! You’ve which makes the CH/VOL just press the MENU key again, and • Make sure the remote is in the correct mode by pressing the CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, been stored controls the majority of the device’s functions, key is programmed with the correct code for maximum programmed this device key. keys serve as arrow keys; then retry your selection. DVD VCR corresponding device key (TV, SAT•CBL•DTC, VCR•DVD). This Unit 3, Door 16, Mississauga, Ontario L5T 3A5 get stuck in a place where the keys remain depressed, such as 1. Try a variety of the device’s functions with the remote. If 4. Press and hold the device key you want to program. While functionality. If some features don’t work, try a different code programming is complete. If the code stored does not give they also access the same tells the remote which device to operate. between sofa cushions. 3. Press and hold the device key you want to program. While some device features don’t work, go to next step to try a you’re holding down the device key, use your other hand in the list. maximum functionality, try another code. NO: Press ON•OFF again. The features as the keys on your you’re holding down the device key, use your other hand different code. to press and hold the remote’s ON•OFF key at the same • Press the ENTER key after you enter a channel number. remote tests the next code for original remotes. Exiting Menu/Guide Mode to press and hold the remote’s ON•OFF key at the same 2. Repeat the Auto Code Search Method from the beginning. time. your device. • Remove any obstacles between the remote and the device. Make The remote automatically times out of Menu or Guide Mode time. When your device turns off, do not stop searching. sure to aim the remote at the IR sensor on the device. Manual Code Search Keep pressing ON•OFF every 2 after 20 seconds of inactivity (no keys being pressed). At that Instead, with the unit now off, continue to press the PLAY ©2010 Audiovox Accessories Corporation key every 5 seconds until the unit turns back on. The Manual Code Search lets you go one-by-one through all the seconds until your device turns back time, the remote clears the displayed menu from the TV. Actual model may vary 111 Congressional Blvd., Suite 350 codes for the device you’re trying to control. When you fi nd the on. When it does, press STOP. 3. Once the unit turns back on, press the REVERSE key on the from illustration If you want to exit the Menu Mode yourself, press the Carmel, IN 46032 one that operates your device, you can stop the search and store remote every 2 seconds until your device turns off again. TIP: Because there are so many codes, you may have to press corresponding device key on the remote (TV, SAT•CBL•DTC, that code. VCR•DVD). The ON•OFF key turns off. Trademark(s) ® Registered When your device turns off again, press the STOP key. the ON•OFF key many times—possibly hundreds of times. RCR312WR US 06