DOCSLIB.ORG

Installation Manual for Theatre Management System TMS-2000 Document Version 4.1.8.01

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Installation Manual for Theatre Management System TMS-2000 Document Version 4.1.8.01 Installation Manual For Theatre Management System TMS-2000 Document Version 4.1.8.01 Software Version 4.1.8 TABLE OF CONTENTS TABLE OF CONTENTS 1.HARDWARE REQUIREMENTS .................................................................... 4 2.THIRD PARTY SOFTWARE INSTALLATION ............................................... 6 2.1.MICROSOFT VISUAL C++ 2008 SP1 REDISTRIBUTABLE ................................. 6 2.2.MICROSOFT VISUAL C++ 2010 SP1 REDISTRIBUTABLE ................................. 7 2.3.POSTGRESQL DATABASE SERVER ............................................................... 7 2.4.FILEZILLA FTP SERVER SOFTWARE ............................................................. 8 2.5.NET-SNMP SOFTWARE ............................................................................... 8 2.6.TIGHTVNC VIEWER FOR WINDOWS ............................................................... 9 2.7.EXT2FSD SOFTWARE (OPTIONAL) ............................................................. 9 3.WINDOWS FIREWALL SETTING ............................................................... 10 4.GDC TMS SOFTWARE INSTALLATION .................................................... 11 4.1.INSTALL GDC TMS SOFTWARE ................................................................. 11 4.2.GENERATE CLIENT-KEY ............................................................................. 13 4.3.LOAD LICENSE FILE TO TMS ...................................................................... 17 4.3.1. Loading License by Running TMS ................................................................................ 17 4.3.2. Loading through License Assistant ............................................................................... 19 5.GDC TMS DATA TRANSFER SETTINGS ................................................... 21 5.1.TMS SERVER DATA DIRECTORY ................................................................ 21 5.1.1. FTP Settings ................................................................................................................ 21 5.1.2. CIFS Settings ............................................................................................................... 25 -1- Installation Manual for Theatre Management System TMS-2000 Document Version 4.1.8.01 CONTACTS AND OFFICES CONTACTS AND OFFICES Website: www.gdc-tech.com Email: [email protected] 24/7 Engineering Support Hotline: North America +1 877 743 2872 (Toll Free) Latin America +52 55 8851 1198 Europe +34 928 912 295 China +86 400 886 0966 (Toll Free) North Asia +852 3520 0920 India +91 022 4044 0500 South East Asia +65 6100 4328 Australia/ +61 407 040 744 New Zealand Hong Kong China (Beijing) China (Shenzhen) Spain (Barcelona) (Headquarters) Unit 1-7, 20th Floor, Rm. 609-618, Office Room A701, 7/F, C/ Esteve Terradas, Kodak House II, Building,20# Xinde Street, Languang Technology Building, nº 27, esc. D, 39 Healthy Street East, Xicheng District, Beijing, P.R. No.7 Xinxi Road, North Zone, Despacho 1 North Point, Hong Kong China 100088 HighTech Park, Nanshan District, 08023 Barcelona, Spain Shenzhen, China Tel: +852 2507 9555 Tel: +86 10 6205 7040 Tel: +86 755 8608 6000 Tel: +34 93 159 51 75 Peru (Lima) USA (Los Angeles) Brazil Singapore (São Paulo) Calle Manuel Miota 170, 1016 West Magnolia Av. Antônio Carlos 10 Ubi Crescent, Miraflores Lima 18, Perú Boulevard, Burbank, Comitre, 540, 3º andar, Ubi Tech Park, CA 91506, USA Conjunto 31, Campolim, Lobby B, #06-25 Sorocaba / São Paulo, Singapore 408564 Tel: +51 1 340-5146 Tel: +1 818 972 4370 / CEP 18047-620, Brasil Tel: +65 6222 1082 +1 877 743 2872 (Toll Free) Tel: +55 15 33269301 -2- Installation Manual for Theatre Management System TMS-2000 Document Version 4.1.8.01 CONTACTS AND OFFICES Indonesia (Jakarta) Japan (Tokyo) India (Mumbai) Mexico (Mexico City) Total Building Lantai 4 Suite 0401, 3F, Kyobashi-Chuo Bldg, Office No. B-207/208, Av. Del peñon 411 esq. Jl. Letjen S. Parman Kav. 106A, 1-14-7 Kyobashi Chuo-ku, Everest Chamber, Ote 168, Col. Moctezuma Kel Tomang, Kec. Grogol Tokyo 104-0031, Japan Andheri Kurla Road, 2ª Sección, Venustiano Carranza, Petamburan, Marol, Andheri (East), Mumbai- Distrito Federal, Jakarta Barat 11440, Indonesia 400 059, India C.P. 01210 Mexico Tel: +52 55 8526 6220 Tel: +62 21 2920 4691 Tel: +81 3 5524 2607 Tel: +91 22 4044 0500 United Arab Emirates (Dubai) Business Centre, Dubai World Central, PO Box 390667, Dubai UAE -3- Installation Manual for Theatre Management System TMS-2000 Document Version 4.1.8.01 1. HARDWARE REQUIREMENTS 1. HARDWARE REQUIREMENTS 1 The TMS runs on PC platform based on x86-64 architecture 2 Operating System Microsoft Windows 7, Microsoft Windows Server 2008R2 Microsoft Windows 8, Microsoft Windows Server 2012 Microsoft Windows 10, Microsoft Windows Server 2016 3 Hardware Requirements: Intel® Core™ i7 4 Core Processor Minimum 8GB RAM Minimum Display Resolution 1920 x 1080 Minimum 1 x LAN Internal HDD (Minimum 40GB for OS and TMS software) Internal HDD or External HDD for Digital Cinema Content Storage (Typically 1TB) Mouse/Keyboard/Monitor 4 Hardware Recommendations Intel® Core™ Xeon® 8 Core Processor 16 GB RAM Wide Screen Display Resolution 1920 x 1080 LAN1: 10/100 Ethernet Adaptor (Management) LAN2: 10/100/1000M Ethernet Adaptor (Content) Dedicated Storage Server with Multiple-Terabyte Capacity 5 Optional Optical Drive: DVD-ROM or Blu-ray CRU Drive (for faster ingest of content) eSATA (for faster ingest of content) USB 3.0 (for faster ingest of content) -4- Installation Manual for Theatre Management System TMS-2000 Document Version 4.1.8.01 1. HARDWARE REQUIREMENTS USB 2.0 Broadband Internet connection (for online services such as KDM delivery, SNMP monitoring, content delivery etc) -5- Installation Manual for Theatre Management System TMS-2000 Document Version 4.1.8.01 2. THIRD PARTY SOFTWARE INSTALLATION 2. THIRD PARTY SOFTWARE INSTALLATION GDC recommends that customers should install all the following third party software before installing GDC-TMS: Microsoft Visual C++ 2008 SP1 Redistributable Microsoft Visual C++ 2010 SP1 Redistributable PostgreSQL database server 8.3.23-3 FileZilla server 0.9.27 Net-SNMP 5.4.2 TightVNC 2.7.10 Customers can also install Ext2Fsd 0.62 software in case their Windows OS needs to recognize external disk with EXT2/EXT3 file system. Important Note: a. Windows file system should be NTFS. FAT32 is strongly not recommended as it may cause PostgreSQL software not to function properly. b. The recommended software version information can be found in the following sections. 2.1. Microsoft Visual C++ 2008 SP1 Redistributable Install Microsoft Visual C++ 2008 SP1 Redistributable 1. Locate the file 2008_sp1_vcredist_x86.exe, double click it to start the installation. 2. “Welcome to Microsoft Visual C++ 2008 Redistributable Setup” window is displayed, click “Next >” to proceed to next step. 3. “License Terms” window is displayed, click the check box “I have read and accept the license terms.” and click “Install >” to start installation. 4. “Setup Complete” window is displayed, and click “Finish” to exit installation wizard. Installation of Microsoft Visual C++ 2008 SP1 Redistributable is complete. -6- Installation Manual for Theatre Management System TMS-2000 Document Version 4.1.8.01 2. THIRD PARTY SOFTWARE INSTALLATION 2.2. Microsoft Visual C++ 2010 SP1 Redistributable Install Microsoft Visual C++ 2010 SP1 Redistributable 1. Locate the file 2010_sp1_vcredist_x86.exe; double click it to start the installation. 2. “Welcome to Microsoft Visual C++ 2010 x86 Redistributable Setup” window is displayed, click the check box “I have read and accept the license terms.”, and click “Install” to start installation. 3. “Installation Is Complete” window is displayed, and click “Finish” to exit installation wizard. Installation of Microsoft Visual C++ 2010 SP1 Redistributable is complete. 2.3. PostgreSQL Database Server Important Note: Please make sure Secondary Logon Service is running. Right-click “Start Task Manager”, go to Services tab, then look for seclogon in the list. Set Startup type of Secondary Logon to Automatic. To set up, click “Services” button. Right-click “Secondary Logon” service in the list, then click “Properties”. Set Startup type to “Automatic”, then click “OK”. Install PostgreSQL 8.3 database server 1. Locate the file postgresql-8.3.23-3-windows.exe; double click it to start the installation. 2. “Setup – PostgreSQL” window is displayed, click “Next >” to proceed to the next step. 3. “Installation Directory” window is displayed. Use the default settings, click “Next >” to proceed to the next step. 4. “Data Directory” window is displayed. Use the default settings, click “Next >” to proceed to the next step. 5. “Password” window is displayed. Enter “gdcdbpasswd” into Password field, and enter “gdcdbpasswd” into Retype password field. Click “Next >” to proceed to the next step. 6. “Port” window is displayed. Use the default settings, click “Next >” to proceed to the next step. 7. “Locale” window is displayed. Use the default settings, click “Next >” to proceed to the next step. 8. “Ready to Install” window is displayed. Click “Next >” to proceed to start installation. 9. “Completing the PostgreSQL Setup Wizard” window is displayed. Uncheck “Launch Stacker Builder at exit” box and click “Finish” to exit installation wizard. Installation of PostgreSQL 8.3 database server is complete. -7- Installation Manual for Theatre Management System TMS-2000 Document Version 4.1.8.01 2. THIRD PARTY SOFTWARE INSTALLATION 2.4. FileZilla FTP Server
Load more

Recommended publications
  • The Bigger Picture
    COVER STORY Linux Filesystems in Vista Jür gen A ck er , pho t oc as e . c om Vista is no better than its prede- cessors at accessing Linux parti- tions. If you need to access a Linux filesystem from Vista, you will need a third-party tool. BY JÜRGEN DONAUER Accessing Linux partitions with Vista THE BIGGER PICTURE indows has traditionally Ext2IFS sible via Windows Explorer just like any avoided the challenge of The free Ext2IFS (Ext2 Installable File normal NTFS drive. To change drive W providing access to Linux System for Windows) [1] tool is proba- mappings or to add new Linux filesys- file systems. If you run Linux and bly the most popular candidate in the tems, you just click on IFS Drives in Sys- Windows on a single machine, for field. Ext2IFS gives Windows the ability tem Controls. Again, you will need to re- example, you must either rely on the to read and write Ext2/ 3 partitions. start Vista in order to see your changes. legacy approach of saving shared files To install Ext2IFS on Windows Vista, On some Vista machines, the new se- with the FAT filesystem or experiment you need to download the setup pro- curity posture prevents users from with some of the new Linux tools for gram from the Ext2IFS website, accessing NTFS partitions. (For a right-click the program icon, thorough look at NTFS with Linux, and select Run as administrator see the January 2007 issue of Linux in the drop-down menu. Magazine.) Our first attempt to install the In the past, various third-party tools software failed.
    [Show full text]
  • HPE Bladesystem Onboard Administrator User Guide
    HPE BladeSystem Onboard Administrator User Guide Abstract This guide provides information on the initial setup and operation of the HPE BladeSystem Onboard Administrator. It also covers use of the Onboard Administrator GUI and enclosure Insight Display. The information in this guide applies to version 4.71 (or later) of the HPE BladeSystem Onboard Administrator. Part Number: 695522-403 Published: September 2017 Edition: 29 © Copyright 2006, 2017 Hewlett Packard Enterprise Development LP Notices The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein. Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise website. Acknowledgments Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks of Intel Corporation in the United States and other countries. Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Adobe® and Acrobat® are trademarks of Adobe Systems Incorporated.
    [Show full text]
  • Geovision IP Speed Dome User Manual
    GV-IP Speed Dome User's Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ISD2411V102-A-EN © 2016 GeoVision, Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of GeoVision. Every effort has been made to ensure that the information in this manual is accurate. GeoVision, Inc. makes no expressed or implied warranty of any kind and assumes no responsibility for errors or omissions. No liability is assumed for incidental or consequential damages arising from the use of the information or products contained herein. Features and specifications are subject to change without notice. Note: No memory card slot or local storage function for Argentina. GeoVision, Inc. 9F, No. 246, Sec. 1, Neihu Rd., Neihu District, Taipei, Taiwan Tel: +886-2-8797-8377 Fax: +886-2-8797-8335 http://www.geovision.com.tw Trademarks used in this manual: GeoVision, the GeoVision logo and GV series products are trademarks of GeoVision, Inc. Windows and Windows XP are registered trademarks of Microsoft Corporation. May 2016 Preface Welcome to the GV-IP Speed Dome User’s Manual. There are two types of the GV-IP Speed Dome, Indoor and Outdoor. They are distinguished by model: Application Model Firmware Version Indoor GV-SD220 (PoE) GV-SD220-S (PoE) V1.08 GV-SD2300 (PoE) Outdoor GV-SD2301 (PoE) V1.09 GV-SD2411 (PoE) V1.02 This Manual provides an overview of the GV-IP Speed Dome and its accessories.
    [Show full text]
  • User's Manual
    GV-IP Camera Firmware Manual Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. ICH265HISI2V10-B © 2017 GeoVision, Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of GeoVision. Every effort has been made to ensure that the information in this manual is accurate. GeoVision, Inc. makes no expressed or implied warranty of any kind and assumes no responsibility for errors or omissions. No liability is assumed for incidental or consequential damages arising from the use of the information or products contained herein. Features and specifications are subject to change without notice. Note: no memory card slot or local storage function for Argentina. GeoVision, Inc. 9F, No. 246, Sec. 1, Neihu Rd., Neihu District, Taipei, Taiwan Tel: +886-2-8797-8377 Fax: +886-2-8797-8335 http://www.geovision.com.tw Trademarks used in this manual: GeoVision, the GeoVision logo and GV series products are trademarks of GeoVision, Inc. Windows is the registered trademark of Microsoft Corporation. September 2017 Contents Preface .............................................................................. vi Naming and Definition.................................................... xv Note for Connecting to GV-DVR / NVR / VMS ............. xvi Note for Recording ....................................................... xvii Note for GV-BX2600..................................................... xviii Frame
    [Show full text]
  • Accessing Linux Data Partitions from Windows
    ACCESSING LINUX DATA PARTITIONS FROM WINDOWS In a dual boot Windows-Linux computer, it is comparatively easier to view the Windows partitions from Linux, than the other way round, i.e., viewing Linux partitions from Windows. In this article, the author presents a way around this challenge. Today, in the world of computers, dual booting or running both Windows and Linux on the same system, is fairly common. In which case, users often want to transfer files/data between the two operating systems. Linux has native support for Windows file systems (NTFS and FAT), which means that you can access Windows partitions from Linux. But, this is not the case with Windows. To access Linux partitions from Windows, you need third-party software, specifically designed for this purpose. Basic differences between Windows and Linux file systems The file systems used in Windows and Linux are completely different in many ways from how the disks and devices are enumerated to the level of data security provided by them. The file systems used in Windows are FAT (FAT12, FAT16 and FAT32) and NTFS this last var systems. Linux supports a greater number of file systems like Ext2, Ext3, Ext4, XFS, JFS, etc. The predominant file system used in Linux is Ext3. On Windows, a disk is divided into partitions and exposed to the user through a drive letter. Even the CD-ROM and removable media get a drive letter. Linux doesn t use drive letters. On Linux, everything is under the root directory (/). Linux treats all the devices as files. All devices like disks and CD-ROMs connected to Linux will be mounted to the root directory or to any other directory under the root like /dev/sda and /dev/cdrom, respectively.
    [Show full text]
  • Playing Back GV-IP Device Recordings on a Windows-Based Computer
    Playing Back GV-IP Device Recordings on a Windows-Based Computer Article ID: GV3-13-12-16-c Release Date: 12/16/2013 Applied to GV-IPCam H.264, GV-Video Server, GV-Compact DVR Ext2Fsd V0.51 Summary The videos on GV-IP devices are recorded in the Linux format. To play back recordings from these devices on a Windows system, we need to first enable the computer to recognize Linux files. This technical notice brings you through the steps of installing the Ext2Fsd program, an ext2 file system driver for Windows, and accessing GV-IP devices’ recordings on a Windows-based computer. The Ext2Fsd program works on Windows 2000, XP, 2003, Vista, 7, 8 and Server 2012 (32-bit and 64-bit). Note: Because of the compatibility issue, for firmware versions later than the versions below, it is required to use Ext2Fsd program to read the Linux-format files on Windows. GV-IPCam H.264 firmware V2.07 or later GV-Video Server • GV-VS04A: firmware V1.06 or later • GV-VS04H: firmware V1.08 or later • GV-VS11: firmware V1.03 or later • GV-VS12: firmware V1.07 or later • GV-VS14: firmware V1.01 or later GV-Compact DVR • GV-Compact DVR V2 4CH: firmware V1.10 or later • GV-Compact DVR V3 4CH: firmware V1.04 or later • GV-Compact DVR V3 8CH: firmware V1.02 or later 1 Instructions 1. Download and install the latest Ext2Fsd from this website. http://sourceforge.net/projects/ext2fsd/files/Ext2fsd/0.51/Ext2Fsd-0.51.exe/download Note: If you are using Windows 8 or Windows Server 2012, change its compatibility before installing the Ext2Fsd program: A.
    [Show full text]
  • Comparison of File Systems
    Comparison of file systems - Wikipedia, the free e... http://en.wikipedia.org/wiki/Comparison_of_file_s... Comparison of file systems From Wikipedia, the free encyclopedia The following tables compare general and technical information for a number of file systems. Contents 1 General information 2 Limits 3 Metadata 4 Features 5 Allocation and layout policies 6 Supporting operating systems 7 See also 8 Notes 9 External links General information Year File system Creator Original operating system introduced DECtape DEC 1964 PDP-6 Monitor Level-D DEC 1968 TOPS-10 George 2 ICT (later ICL) 1968 George 2 V6FS Bell Labs 1972 Version 6 Unix ODS-1 DEC 1972 RSX-11 RT-11 file system DEC 1973 RT-11 DOS (GEC) GEC 1973 Core Operating System CP/M file systemG ary Kildall 1974 CP/M OS4000 GEC 1977 OS4000 FAT12 Microsoft 1977 Microsoft Disk BASIC DOS 3.x Apple Computer 1978 Apple DOS Pascal Apple Computer 1978 Apple Pascal CBM DOS Commodore 1978 Microsoft BASIC (for CBM PET) V7FS Bell Labs 1979 Version 7 Unix ODS-2 DEC 1979 OpenVMS DFS Acorn Computers Ltd 1982 Acorn BBC Micro MOS ADFS Acorn Computers Ltd 1983 Acorn Electron (later Arthur RISC OS) FFS Kirk McKusick 1983 4.2BSD ProDOS Apple Computer 1983 ProDOS 8 MFS Apple Computer 1984 Mac OS Elektronika BK tape NPO "Scientific centre" (now 1985 Vilnius Basic, BK monitor program format Sitronics) HFS Apple Computer 1985 Mac OS Amiga OFS[11] Metacomco for Commodore 1985 Amiga OS High Sierra Ecma International 1985 MS-DOS, Mac OS NWFS Novell 1985 NetWare 286 FAT16 Microsoft 1987 MS-DOS 3.31 Minix V1 FS Andrew S.
    [Show full text]
  • Studying Main Differences Between Linux & Windows Operating Systems
    International Journal of Electrical & Computer Sciences IJECS-IJENS Vol:12 No:04 25 Studying Main Differences Between Linux & Windows Operating Systems Lecturer/ Hadeel Tariq Al-Rayes Abstract—Comparisons between the Microsoft Windows and II. THE ESSENTIAL DIFFERENCES BETWEEN LINUX & Linux computer operating systems are a long-running discussion WINDOWS (BEGINNERS LEVEL) topic within the personal computer industry. Throughout the 1- Drives don’t have letters, they have mountpoints entire period of the Windows 9x systems through the introduction of Windows 7, Windows has retained an extremely The first thing that usually trips up people who come from large retail sales majority among operating systems for personal Windows to Linux is that filesystems aren’t assigned letters desktop use, while Linux has sustained its status as the most prominent Free Software and Open Source operating system. the way they are in Windows. Instead, there is a single root After their initial clash, both operating systems moved beyond filesystem whose path is “/”. If you must use the Windows the user base of the personal computer market and share a analogy to help you conceptualize it, you can think of this as rivalry on a variety of other devices, with offerings for the server the C:\ drive; it’s the top of the filesystem. The Disk Analyzer and embedded systems markets, and mobile internet access. Shows your Filesystem Usage and Layout Linux mounts new drives in folders inside the root filesystem. You’ll notice that Linux and Microsoft Windows differ in philosophy, cost, if you plug in a USB key, it will be mounted to a path like versatility and stability, with each seeking to improve in their “/media/partition-name”.
    [Show full text]
  • How to Use Ext2 and Ext3 for Windows System
    How to Use Ext2 and Ext3 for Windows System Version 1.0 June 2011 How to use ext2 and ext3 for windows system Contents 1. Introduction ......................................................... 1 2. How to use .......................................................... 1 2.1 Download software ........................................... 1 2.2 Installation ......................................................... 1 2.3 Use software ..................................................... 5 1 © Copyright BGI 2011 How to use ext2 and ext3 for windows system 1. Introduction Ext2fsd is a tool for accessing ext2 and ext3 file systems. It runs under all versions of Windows and can read almost any ext2 and ext3 file system. Please also read the release notes and the troubleshooting section. Windows is a trademark of Microsoft Corporation. Linux is a trademark of Linus Torvalds. All other trademarks and service marks are the property of their respective owners. This document describes how to use ext2 and ext3 format files for windows system. 2. How to use 2.1 Download software Software name: ext2Fsd-0.50.exe Address: http://sourceforge.net/projects/ext2fsd/files/ext2fsd/0.50/ Features Ext2Fsd supports: 1) Ext2/Ext3 volume reading & writing 2) Ext3 journal replay when mounting 3) Various codepage: utf8, cp936, cp950, etc 4) Mountpoint automatical assignment 5) Large inode size: 128, 256, etc 6) Large file size bigger than 4G 7) CIFS sharing over network 8) Htree directory indexing 9) Ext4 Extent read-only, no size truncating and expanding support 10) Fast fsck (uninit_bg) and group block checksum support 11) 64k block-size, support compatible to Linux Ext4 and e2fsprogs 2 © Copyright BGI 2011 How to use ext2 and ext3 for windows system 12) OS: windows 2000, xp, vista, server 2003/2008 and win7 Features Ext2Fsd doesn’t support: 1) Fully Ext3 journal support 2) Ext4 Extent support 3) LVM and Linux raid (md) 4) NT4 is no longer supported 2.2 Installation Installation needs six steps, please operate and finish according to the following prompt message.
    [Show full text]
  • Release Notes: Novabackup 19.3 Novabackup 19.3 (April 2019) Backup for the Rest of Us
    Release Notes: NovaBACKUP 19.3 NovaBACKUP 19.3 (April 2019) Backup For The Rest of Us What’s new in NovaBACKUP 19.3 ? General features and fixes: • Added support for Windows Server 2019 and Windows 10 October 2018 update • New feature to show the number of activations a license key has in the Help > About area • Suppress warning messages in logs related to having multiple connections to the same network location; the warning was shown if a mapped drive existed for the target network backup location • Fixed issues where scheduled jobs that failed do not run again until they are modified • Fixed LogViewer unable to display non UTF-8 characters that are valid in Windows • Fixed displaying the number of skipped files and the duration of the backup in the job log summary tab • Fixed issues displaying the elapsed time in logs • Fixed issues with System State restore • Fixed BackupClientAgent crashes when laptop goes to sleep during backup by closing laptop lid • Fixed logs of copy jobs does not show amount of copied data • Fixed issues where failed backup jobs added to the scheduler using "One Time" mode repeat immediately after completing. Image backup related features and fixes: • New feature to create an image backup directly to VHDX format • New feature to convert an existing image backup to VHDX format • Fixed issues when performing an image backup with more than one disk selected • Fixed issues with image backup retention if underscore character in the image backup name • Fixed issues when creating differential images on systems with
    [Show full text]
  • Die Kunst Des Verdeckens
    Computer & Literatur Verlag GmbH DIE KUNST DES VERDECKENS von Dr. Rolf Freitag mit inhaltlichen Ergänzungen von Jörg Braun, Rosa Riebl und Dr. Stefan Ritter Bibliographische Information der Deutschen Nationalbibliothek: Die Deutsche Nationalbibliothek verzeichnet diese Publikation in der Deutschen Nationalbibliographie; detaillierte bibliographische Daten sind im Internet über http://dnb.d-nb.de abrufbar. Alle Rechte vorbehalten. Ohne ausdrückliche, schriftliche Genehmigung des Herausgebers ist es nicht gestattet, das Buch oder Teile daraus in irgendeiner Form durch Fotokopie, Mikrofilm oder ein anderes Verfahren zu vervielfältigen oder zu verbreiten. Dasselbe gilt für das Recht der öffentlichen Wiedergabe. Der Verlag macht darauf aufmerksam, daß die genannten Firmen- und Markenzeichen sowie Produktbezeichnungen in der Regel marken-, patent-, oder warenzeichenrechtlichem Schutz unterliegen. Die Herausgeber übernehmen keine Gewähr für die Funktionsfähigkeit beschriebener Verfahren, Programme oder Schaltungen. 1. Auflage 2011 © 2011 by C&L Computer und Literaturverlag Zavelsteiner Straße 20, 71034 Böblingen E-Mail: [email protected] WWW: http://www.CuL.de Coverdesign: Hawa & Nöh, Neu-Eichenberg Satz: C&L Verlag Druck: PUT i RB DROGOWIEC Printed in Poland Dieses Buch wurde auf chlorfrei gebleichtem Papier gedruckt ISBN 978-3-936546-65-1 INHALT Vorwort .............................................................11 Kapitel 1 Diebstahlsicherung...........................................15 1.1 Physikalische Zugangssicherung..................................................................
    [Show full text]
  • An Overview of File Systems V1.1
    An Overview of File Systems v1.1 By Robert Spotswood What follows is a cursory summary of the more common Linux and Windows file systems you could put on one of your partitions. The list is far from complete on the Linux side. File systems exist to allow you to store, retrieve, and manipulate data. There are two basic types of file systems, journaling and non-journaling. Journaling file systems add an extra few steps to every write. Before writing/changing any data to the hard drive, the file system driver writes to a journal what it is going to do, then does the write, then marks the journal entry as done (or erases it). All this extra writing means that journaling file systems© writes are generally slower than an equivalent non-journaling file systems©. But, what you get for slower writes is seen most dramatically when there is a sudden, unexpected, reboot. In order to ensure the metadata (definition below) for a partition is at least consistent, a non-journaling file system must do a disk check over the entire partition(s). This can take minutes to hours, and the larger the partition, the longer it will take. A journaling file system, on the other hand, just looks at the journal, and replays any transactions that were not complete. This process usually takes only seconds no matter how large the partition. This also dramatically reduces, but does not eliminate, the chance of file corruption and data loss compared to non-journaling file systems. Some types of journaling only keep a journal of the metadata.
    [Show full text]