60” Electricity Tool Cabinet

60” Electricity Tool Cabinet Order Cabinet with or without Tools. (or order the tools alone!) Midwest Cabinet is constructed of solid maple and maple veneers. Upper cabinet doors, side and rear panels are lined with 1/4” pegboard. Lower cabinet features 1 fixed and 2 adjustable 1” plywood shelves. Upper and lower locking doors of 1-1/8”T maple veneer panels mounted with hinges. Earth-friendly UV finish. Shipped set up. Overall size 60”W x 84”H x 22”D. Includes assorted pegboard hooks. Shown with Tote Trays (Stk. 558201), sold separately. Tools shown in cabinet may vary. Stk. Mfr. Item Price 155485 TC-13 Cabinet Only $2,716.00 559109 MWTC13-T Tools Only $4,795.00 558910 MWTC13-CT Cabinet Plus Tools $7,195.00 558201 MWTTPKG-60 19 Tote Trays $239.00 Complete Set of Tools for MWTC13-T Bessey Footprint Lufkin 2 Hammer, Nail, Crv. Claw, 16 oz., 6 ea. Clamp, C-Clamp: 2”, 3”, 4” 1 Gauge, Marking 6 Rule, Steel, 12” 13-1/4” Blackhawk Gardner Bender Lutz 2 Hammer, Soft Face, 16 oz., 1 Wrench, Comb., Frac., 14 pc. 1 Cable Ripper 2 File Card 13-1/2” Buck Brothers 6 Knife, Pocket, 3-3/4” Mayhew 1 Level, Alum., 24” 1 ea. Chisel: 1/4”, 1/2”, 3/4”, 1” 3 Multimeter 1 ea. Chisel, Cold: 3/8”, 1/2”, 5/8” 4 Nail Set, 3 pc. Channellock 2 Terminal Kit 2 Punch, Ctr., 3/8” 1 Plane, Bench 1 Cutter, Cable, 9-1/2” General 2 ea. Punch, Pin: 1/8”, 3/16” 1 Plane, Block 8 Pliers, Lineman’s, Rnd. Nose, 7” 2 Countersink, 1/2” Milwaukee 1 Saw, Compass, 12”, 8 tpi 8 Pliers, Long Nose, 6” 1 Drill Stop, 6 pc. 1 Drill, Cordless 18V 4 Screwdriver, Cab. Tip, 6” 1 Pliers, Tongue & Groove, 10” Great Neck Nicholson 4 Screwdriver, Cab. Tip, 3” 3 Wiring Tool, 8-1/4” 2 Screwdriver, Offset, Comb., #2 8 File Handle, for 10” file 3 Screwdriver, Phil., #1 Crescent Hanson 2 File, 5-1/2”, 6 pc. 8 Screwdriver, Std., 1-3/4” Stub. 8 Pliers, Diagonal, 6” 1 Tap & Die, 39 pc. 2 File, Mill, Bastard, 10” 8 Screwdriver, Std., 4” 4 Wrench, Adj., 4” Irwin 2 File, Mill, Second Cut, 10” 1 Screwdriver, Std., 6” 2 ea. Wrench, Adj.: 6”, 8” 1 Bit, Drill, HSS, 15 pc. 2 File, Mill, Smooth, 10” 3 ea. Screwdriver, Std.: 6”, 8” CS Osborne 1 Bit, Drill, Spade, 13 pc. 2 Rasp, Half Rnd., 10” 1 Square, Comb., 12” 2 Hammer, Uphol., 7-1/2 oz. 1 Bit, Drill, Spade, 6”, 6 pc. 1 Saw, Comp./Key., 12”, 8 tpi 1 Square, Steel, 12” 1 Mallet, Black Rubber, 30 oz. 1 Screw Extractor, 5 pc. 2 Saw, Hacksaw, 10”, 18 tpi Starrett 1 Mallet, Hick., Barrel, 3 Snips, Circular, 7” 1 ea. Saw, Handsaw: 20” x 8 tpi, 2 Punch, Ctr., 5/32” 2-1/2” x 5-1/2” 2 Snips, Srt., 10” 24” x 12 tpi Weller 1 Wing Divider, 6” Jet Norton 8 Soldering Gun Dremel 1 Cutter, Bolt, 5/16” 4 Sanding, Block 4 ea. Soldering Iron: 80W, 175W 4 Multi-Vise Johnson 1 Stone, Oil, India, 2” x 1” x 6” Wiss Eklind 1 Bevel, Sliding T, 10” Stanley 2 Snips, Compound, Srt., 9-3/4” 1 Wrench, Hex Key, Frac., 18 pc. 2 Square, Try, 8” 2 ea. Screwdriver, Phil.: #’s 2, 3, 4 Xcelite 3 Wrench, Hex Key, T-Handle, Lisle 4 Awl, Scratch 2 Nut Driver, 7 pc. Frac. 6”, 8 pc. 3 Tester, Continuity 1 ea. Hammer, Ball Pein: 12 oz. x 13”, 16 oz. x 14” Midwest has been proudly serving educators For more information please contact us. with name brand equipment, tools & supplies Email [email protected] for Industrial Arts, Vocational & Technology Phone 800-831-5904 Programs for over 100 years. midwesttechnology.com Pricing guaranteed through November 1, 2018. TOOLS TO ENGAGE YOUR STUDENTS TO DESIGN, INVENT, BUILD AND LEARN.

Load more