User's Manual

0_BP68-00448A-01(cover) 1/20/05 5:03 PM Page 3

DLPTV

INSTRUCTION MANUAL HL-R5087W/HL-R5687W

Register your product at www.samsung.com/global/register 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 2 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 3

A Guide to Digital TV

• What is Digital Television? Digital television (DTV) is a new way of transmitting high quality video and audio to your TV set. Using DTV, broadcasters can transmit high definition TV (HDTV) images, Dolby digital surround audio, and new services such as multicasting (transmitting more than one program on the same TV channel) and datacasting. Several of these services can be combined into a single digital broadcast.

Digital Television Services

• Digital Picture Quality DTV programs are transmitted in two different formats. The first is Standard Definition Television (SDTV) and the second is High Definition Television (HDTV).

• SDTV program formats include 480-line interlaced (480i) and 480-line progressive (480p) video. 480i programs are essentially a digital version of our current analog TV programs, while the 480p format offers improved image detail over 480i. Some 480p programs are broadcast in widescreen and are comparable to progressive-scan DVD movies in image quality.

• HDTV program formats include 1080-line interlaced (1080i) and 720-line progressive (720p). Both HDTV formats are always broadcast in widescreen, and offer much higher picture quality than SDTV.

• Dolby Surround Sound With DTV, you can listen to a variety of Dolby digital audio formats from Dolby Surround 2.0 to Dolby Digital 5.1 surround, using your home audio system. Many HDTV programs are now broadcast with DD 5.1 soundtracks.

English - 3 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 4

CableCARD and Digital Cable Ready TVs

CableCARD and Digital Cable Ready TVs are the products of a new digital cable standard. This new standard is called OpenCable and it is a concerted effort to standardize the digital cable service network interface in North America. For more information, please refer to www.cablelabs.com.

Digital Cable Ready TVs are equipped with a proper digital cable tuner to receive digital cable signals from your local cable service provider. They are also designed to work with digital cable card modules (PCMCIA card modules called CableCARDs). These PCMCIA card modules or CableCARDs will be provided by your local cable service provider after a proper subscription process.

The provided CableCARD from your local cable service provider needs to be inserted into the CableCARD slot of a Digital Cable Ready TV. Please refer to page 24 for how to insert the CableCARD. A digital set-top box which used to be provided by the cable service provider is no longer needed with Digital Cable Ready TVs and CableCARDs.

When CableCARD is inserted into the slot, the TV screen will show the message that CableCARD is inserted and tries to download necessary data such as channel information or subscription information from your digital cable service provider. When you insert CableCARD for the first time, this process could take few minutes depending on the amount of data your cable provider needs to send. During this process the digital cable service provider or CableCARD may display messages on the TV screen to help or give you further information.

Please contact your local cable provider for more information on service availability and how to acquire a CableCARD.

NOTE • This television receiver supports the copy protection system regulated by DTLA (Digital Transmission Licensing Administrator). It should be noted that copy protected content may not be viewable depending on your particular connections.

English - 4 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 5

Q&A

1. Is the antenna I use for existing TV reception good enough for DTV? Over-the-air (OTA) digital TV broadcasting uses the same channels as analog TV and works well with many existing TV antennas. However, DTV broadcast channel assignments are different than analog channels. You should find out whether your local DTV broadcasts are on VHF (channels 2-13) or UHF (channels 14-69) to see if you need a different antenna.

If your DTV channels are on UHF and you already get good UHF reception, your present antenna may work fine. The same holds true for VHF DTV reception. Note that in some markets, both VHF and UHF channels are used for DTV broadcasts.

You can find out the latest DTV channel assignments for your area by browsing selected Internet web sites such as www.titantv.com and www.fcc.gov.

2. How difficult is it to receive DTV signals indoors? This depends on whether your local DTV stations are running full power or not and how close your location is to the transmission tower. DTV receivers do not require as much signal as analog TV receivers to produce high-quality images and sound.

Once the DTV signal level exceeds a certain threshold at the receiver, the digital video and audio data is decoded at the same quality it was originally encoded for broadcast. This is a big advantage for DTV over analog TV - there is no noise, ghosting, static, or scratchy audio.

3. How can I connect an antenna in my townhouse, co-operative apartment, condominium, or apartment? The Federal Communications Commission's OTARD Rule (part of the Telecommunications Act of 1996) allows residents of condominiums, townhouse, or members of neighborhood associations to put up outside antennas for reception of broadcast TV signals as long as those antennas are not located in common areas and are no more than 12' in height.

Residents of rental units (apartments, etc.) are not covered by the OTARD rules and will have to use indoor antennas to receive DTV broadcasts. It is possible that the landlord of an apartment complex can provide broadcast DTV signals via a master TV antenna system to each apartment.

4. Can I connect my DTV set-top receiver to my cable TV service? Cable TV systems use a different method for transmitting digital TV programs that is currently incompatible with broadcast DTV set-top receivers. So you will still need to use an outdoor or indoor antenna to receive OTA broadcast DTV programs.

The good news is that you won't have to pay a monthly or per-program charge to watch OTA DTV and HDTV programs. They're free, unlike subscription satellite TV or premium cable TV. All you need is an antenna and a DTV set-top receiver to enjoy clear, sharp widescreen images and high-quality audio.

English - 5 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 6

Table of Contents

Your New Wide TV ...... 10 Viewing Position ...... 10 Replacing the Lamp...... 10 List of Features ...... 12 Accessories ...... 12 Front Panel Buttons ...... 13 Front Panel Information Window...... 14 Rear Panel Jacks ...... 15 Remote Control ...... 16 Connections ...... 20 Connecting VHF and UHF Antennas...... 20 Antennas with 300-ohm Flat Twin Leads ...... 20 Antennas with 75-ohm Round Leads...... 20 Separate VHF and UHF Antennas ...... 21 Connecting Cable TV and VCR...... 22 Cable without a Cable Box ...... 22 Cable with a Cable Box that Descrambles All Channels ...... 22 Connecting an Analog Cable Converter Box...... 23 Connecting an Analog Cable Converter Box and a VCR ...... 23 Connecting CableCARD ...... 24 Connecting a Camcorder...... 25 Connecting a DVD Player ...... 26 Connecting to Y,PB,PR ...... 26 Connecting to Audio and Video Jacks ...... 26 Connecting a DTV Set-Top Box ...... 27 Connecting to Y,PB,PR ...... 27 Connecting to DVI (Digital Visual Interface) ...... 27 Connecting to HDMI (High Definition Multimedia Interface) ...... 28 Connecting a Digital Audio System ...... 29 Connecting to an Analog Amplifier ...... 29 Operation...... 32 Turning the TV On and Off...... 32 Viewing the Menus and On-Screen Displays ...... 32 Selecting a Menu Language ...... 33 Memorizing the Channels ...... 34 Adding and Erasing Channels...... 36 Changing Channels...... 37 Customizing Your Remote Control ...... 38 Remote Control Codes...... 39 Setting the Clock...... 40 Setting the On/Off Timer ...... 42 Setting the Sleep Timer ...... 43 Viewing an External Signal Source ...... 44 Assigning Names to External Input Mode ...... 45

English - 6 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 7

Channel Control ...... 48 Selecting Your Favorite Channels ...... 48 Labeling the Channels ...... 49 Fine Tuning Analog Channels Analog ...... 50 Checking the Digital-Signal Strength Digital ...... 51 LNA (Low Noise Amplifier)...... 52 Picture Control...... 54 Picture Control ...... 54 Selecting the Color Tone ...... 56 Changing the Picture Size...... 57 Digital Noise Reduction ...... 58 DNIeTM (Digital Natural Image engine) ...... 59 Setting the My Color Control Mode...... 60 Using the Color Weakness Enhancement Feature...... 62 Setting the Film Mode...... 63 Viewing Picture-In-Picture...... 64 Selecting the Sound Source ...... 70 Freezing the Picture...... 71 Setting the Blue Screen Mode...... 72 Sound Control ...... 74 Sound Control ...... 74 Setting the SRS TSXT...... 76 Auto Volume...... 77 Choosing a Multi-Channel Sound (MTS) track Digital ...... 78 Choosing a Multi-Channel Sound (MTS) track Analog ...... 79 Choosing a Digital Sound Format Digital ...... 80 Selecting the Internal Mute ...... 81 Setting the On/Off Melody ...... 82 Special Features ...... 84 Setting the Function Help ...... 84 Menu Transparency Level...... 85 Using the V-Chip ...... 86 Viewing Closed Captions (On-Screen Text Messages) Analog ...... 92 Viewing Closed Captions (On-Screen Text Messages) Digital ...... 94 Using the CableCARD ...... 96 Using the CableCARD Setup Function...... 97 Using the Guide...... 99 Appendix...... 102 Troubleshooting ...... 102 Cleaning and Maintaining Your TV ...... 103 Using Your TV in Another Country...... 103 Specifications ...... 103

English - 7 SAMSUNG 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 8 Page PM 5:09 1/20/05 1_BP68-00448A-01(02~17) 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 9

Your New Wide TV 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 10

Your New Wide TV

Viewing Position

To optimize your viewing comfort, please follow the guidelines below for viewing distance. If viewing for an extended period of time, sit as far back from the screen as possible.

Make sure to put the product at a distance (of about 10cm/ 4inch) from the wall so that adquate ventilation can be provided. • Failure to do so may cause the critical effect in the expected life span of the product or the quality. Replacing the Lamp

•Why do I need to replace the lamp? The lamp used in a DLP TV has a limited lifespan. For the best screen quality it needs to be replaced periodically. After replacing the lamp, the screen quality will be bright and clear as new.

• When do I need to replace it? It should be replaced when the screen becomes darker, less clear or when the Lamp indicator on the front are flashing.

• Check before lamp replacement 1. The lamp must be the same code number and type. 2. The lamp type is indicated on the left side of the TV. It is also indicated on the lamp case. 3. After checking the code number for the lamp, give the code number to the store where you purchased the TV or to a Samsung Service center.

• Caution 1. Replace with the correct code numbered lamp to avoid damage to the TV. 2. Turn the power off and wait for 30 minutes before replacing the lamp as it will be hot. 3. Do not touch the glass part of the lamp with your bare hands nor insert any foreign object inside the cover as it may cause poor screen quality, electric shock or fire. 4. Do not place the old lamp near flammable objects or within the reach of children. 5. Be sure to connect this TV directly to an AC wall outlet. If the TV's AC plug is connected to a cable box or other source, it will not allow for proper cool down time.

English - 10 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 11

• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.

Unplug TV, then use a 1 screwdriver to remove the screws.

2 Open the Lamp cover.

Remove the 2 press-pin 3 screws securing the Lamp.

Separate the Lamp from the 4 engine by holding the handle and pulling it out.

To reinstall the Lamp, follow 5 these steps in reverse order.

NOTES • Be sure the replacement Lamp is the same type. • After replacing the lamp, align the lamp cover with the groove and secure the screws. • The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective circuit).

English - 11 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 12

Your New Wide TV

List of Features

Your TV was designed and engineered using the latest technology. It is a full-featured, high-performance unit that exceeds industry standards. In addition, it has these special features:

• Easy-to-operate remote control • Easy-to-use on-screen menu system you can access from the front panel or remote control • Automatic timer to turn the TV on and off at any time you choose • Adjustable picture and sound settings and the ability to memorize your favorite settings • Automatic channel tuning for up to 181 channels • A special filter to reduce or eliminate reception problems • Fine tuning control for the sharpest picture possible • A built-in multi-channel sound decoder for stereo and bilingual listening • Built-in, dual channel speakers • A special sleep timer • Picture-in-Picture capability that let you watch two channels at once • Widescreen TV with adjustable image size • Life-like clear images provided by DNle technology • My Color Control Mode for corresponding with your color style • Color weakness Mode • Digital Input (HDMI/DVI IN) jack • Digital Audio Output (OPTICAL) jack • AV network system (Anynet) that enables you to easily control Samsung audio-video(AV) devices from this TV. • CableCARD slot Accessories

Once you have unpacked your TV, check to make sure that you have all the parts shown here. If any piece is missing or broken, call your dealer.

Remote Control Warranty Cards (2)/ Instruction Manual/ Anynet Cable (BP59-00076A)/ Registration Card (1) Safety Guide/ AAA Batteries Quick Guide/ Anynet Manual/ Manual Guide

English - 12 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 13

Front Panel Buttons

The buttons on the front panel control your TV’s basic features, including the on-screen menu system. To use the more advanced features, you must use the remote control.

Standby state. Auto timer on has been set. (Standby indicator; Red) (Timer indicator)

Press and hold the POWER button for a few seconds to Press to switch between viewing TV programs and turn the TV on or off. signals from connected components.

Press to lower or raise the volume and to select items Press to change channels and to move between items when using the on-screen menu. on the on-screen menu.

Press to see the on-screen menu. Press to activate (or change) a particular item.

NOTE •Touching the control panel using your finger will cause Blue LEDs to Aim the remote control towards this spot on the TV. light for all buttons. You can then locate the desired button and touch it to operate.

English - 13 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 14

Your New Wide TV

Front Panel Information Window

The Information window appears as illustrated above while the TV is turning on. (Refer to the TV set’s display for animation details.) When successfully turned on, an animated “Smile” figure appears and then fades out slowly.

Appears while the TV is turning off.

When these indicators appear, there is a possible problem with the TV.

Lamp or other component may be defective. Please contact a certified technician.

Check if the ventilation hole on the rear of the set is blocked, because if the inner temperature is too high, the power will shut off.

A cooling fan inside the set is not operating normally.

The TV’s rear cover is not properly shut.

NOTES • It takes about 30 seconds for the TV to warm up, so normal brightness may not appear immediately. • The TV has a fan to keep the inside lamp from overheating. You’ll occasionally hear it working.

English - 14 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 15

Rear Panel Jacks

Use the rear panel jacks to connect components such as a VCR. You can connect different components such as VCRs, Set-Top Box and a DVD player etc., because there are two sets of video input jacks and two set of component video input jacks on the rear panel of your TV. For more information, please see “Connections”.

Œ ANTENNA terminals Two independent cables or antennas can be connected to these terminals. Use “Cable IN” and “Air IN” terminals to receive a signal from VHF/UHF antennas or your cable system. Use the “Cable OUT” terminal to send the signal being received by the “Cable IN” terminal out to another component (such as a Cable Set-Top Box). (Refer to page 20)

´ Component1, 2 jacks (Y, PB, PR, L, R) Use these jacks to connect the component video/audio signals from a DVD player or a set-top box. (Refer to page 26~27)

ˇ VIDEO/AUDIO OUTPUT jacks Sends video/audio signal from the TV to an external source, such as a VCR. These jacks are available only in RF, Video and S-Video modes.

¨ S-VIDEO INPUT jacks Connects an S-Video signal from an S-VHS VCR or DVD player. (Refer to page 25)

ˆ VIDEO/AUDIO INPUT jacks Connect video/audio signals from external sources, such as VCR or DVD players. (Refer to page 26)

Ø DVI (Digital Visual Interface) AUDIO INPUT jacks Connect to the digital audio output jacks of a device with DVI output. (Refer to page 27)

∏ DIGITAL AUDIO OUT(OPTICAL) jack Connect to a Digital Audio Component. (Refer to page 29)

” Anynet Please refer to the Anynet Owner’s Instruction.

’ HDMI (High Definition Multimedia Interface)/ DVI INPUT jack Connect to the HDMI jack of a device with HDMI output. Connect to the digital video output jack for device with DVI output. (Refer to page 27~28)

˝ CableCARDTM Insert the CableCARD into the slot. (Refer to page 24)

Ô SERVICE This jack is for software upgrades.

English - 15 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 16

Your New Wide TV

Remote Control

You can use the remote control up to about 23 feet from the TV. When using the remote control, always point it directly at the TV. You can also use your remote control to operate your VCR, Cable box, DVD player or Samsung Set-Top Box. See pages 38~39 for details.

1. POWER 17. EXIT Turns the TV on and off. Press to exit the menu. 2. P.MODE 18. ▲, ▼, œ, √, ENTER Adjust the TV picture by selecting one of Press to select highlight up, down, left, or the preset factory settings (or select your right. While using the on-screen menus, personal, customized picture settings.) press the ENTER to activate (or change) a particular item. 3. ANTENNA Press to select “AIR” or “CABLE”. 19. MTS (Multichannel Television Stereo) 4. CHANNEL NUMBER Press to choose Stereo, Mono or SAP Press to directly tune to a particular (Secondary Audio Program). channel. 20. PIP (Picture In Picture) 5. - Displays the available channels in Press to select additional channels (digital sequence. (These buttons change channels and analog) being broadcast by the same in the PIP window only.) station. For example, to select channel “54-3”, press “54”, then press “-” and 21. STILL “3”. Press to pause the current screen. 6. VOL +, VOL - 22. ASPECT Press to increase or decrease the volume. Press to change the screen size. 7. MUTE 23. SRS Press to mute the TV sound. Activates TruSurround. 8. ANYNET 24. DNIe (Digital Natural Runs the Anynet view functions and sets up Image engine) Anynet devices. Activates DNIe. 9. MENU 25. SET Displays the main on-screen menu. Used during set up of this remote control, so that it will work compatibly with other 10. CH.LIST devices (Set-Top box, VCR, Cable box, DVD, Displays the channel list. etc.). 11. FAV.CH (Favorite Channel) 26. SLEEP Press to switch between your favorite Press to select a preset time interval for channels. automatic shut off. 12. MODE 27. PIP Controls Selects a target device to be controlled by CH / ; Press to display the available the Samsung remote control (i.e., TV, STB, channels in sequence. (These buttons VCR, CABLE, or DVD). change channels in the PIP window only.) 13. PRE-CH 28. CAPTION Tunes to the previous channel. Controls the caption decoder. 14. SOURCE 29. VCR/DVD Controls Press to display all of the available video Controls VCR or DVD functions: Rewind, sources (i.e., TV, Set-Top box, VCR, DVD, Stop, Play/Pause, Fast Forward. DTV). 30. RESET 15. CH / If your remote control is not functioning Press to change channels. properly, take out the batteries and press Moves from one set of screen information the reset button for about 2~3 seconds. to the next in TV Guide menu. Re-insert the batteries and try using the 16. INFO remote control again. Press to display information on the TV screen.

English - 16 1_BP68-00448A-01(02~17) 1/20/05 5:09 PM Page 17

Installing Batteries in the Remote Control With normal use, the batteries in the remote control should last about a year. If you notice a performance degradation while using the remote, the batteries may need to be replaced. Make sure you replace both batteries and do not mix old and new batteries in the remote control. If you won’t be using the remote control for a long time, remove the batteries and store them in a cool dry place.

Slide the back cover all the way out to open the battery compartment of 1 the remote control.

Install two AAA size batteries. Make sure to match the “+” and 2 “–” ends of the batteries with the diagram inside the compartment.

3 Slide the cover back into place.

NOTE • Do not mix battery types, I.e, alkaline and manganese.

English - 17 SAMSUNG 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 18 Page PM 5:10 1/20/05 2_BP68-00448A-01(18~31) 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 19

Connections 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 20

Connections

Connecting VHF and UHF Antennas

If you do not have a cable system, you will need to connect an antenna to your TV.

Antennas with 300-ohm Flat Twin Leads If your antenna looks like this: it has 300-ohm flat twin leads.

Place the wires from the twin leads under the screws on the 1 300-75 ohm adaptor (not supplied). Use a screwdriver to tighten the screws.

Plug the adapter into the “Air IN” terminal on the rear 2 panel.

Antennas with 75-ohm Round Leads If your antenna looks like this: it is an antenna with 75-ohm round leads.

Plug the antenna lead into the “Air IN” terminal on the rear 1 panel.

English - 20 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 21

Separate VHF and UHF Antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

Connect both antenna 1 leads to the combiner.

Plug the combiner into the “Cable IN” terminal on the 2 rear panel.

English - 21 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 22

Connections

Connecting Cable TV and VCR You can connect different cable systems to your TV, including cable without a cable box, and cable with a cable box that descrambles some or all channels.

Cable without a Cable Box If you want to connect cable, and you do not need to use a cable box:

Plug the incoming cable into the “Cable IN” 1 terminal on the rear panel.

Cable with a Cable Box that Descrambles All Channels

Find the cable that is connected to the 1 ANTENNA OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

Connect the other end of this cable to the “Cable 2 IN” terminal on the rear panel.

English - 22 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 23

Connecting an Analog Cable Converter Box This connection allows you to watch cable and premium channels. You should keep your TV selected to “Cable IN” so that you can use the TV features. When viewing premium channels, select “Air IN” and tune the TV to channel 3 or 4 (whichever channel is vacant in your area), then use the converter box to change channels. You will need two coaxial cables.

NOTES From • When you use a converter box with Cable your TV, there may be features that you can not program using the remote control, such as programming your favorite channels and blocking channels. • The output from "Cable Out" is not available when "Air/CATV" is set to "Cable" in the PIP menu.

Connecting an Analog Cable Converter Box and a VCR This connection allows you to watch and record basic and premium cable channels, as well as watch videotapes. You should keep your TV selected to “Cable IN” so that you can use the TV’s features. When viewing premium channels or recording with the VCR, select “Air IN” (whichever channel is vacant in your area), then use the converter box to change channels.

TV Rear Panel Caution: If you want to record one channel while watching another channel, a splitter (not included) must be added between the cable and “Cable IN”. One output of the splitter goes to “Cable OUT” and the second output is connected to IN on the cable converter box.

If you have a mono VCR, connect L/Mono to From VCR Audio OUT using only one audio cable. Cable When you use a converter box with your TV there may be features that you can not program using the remote control, such as programming your favorite channels and blocking channels.

Stereo VCR

English - 23 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 24

Connections

Connecting CableCARD

You must obtain a CableCARD from a local cable service provider.

Insert the CableCARD into the “CableCARD” slot and TV Rear Panel 1 the message “CableCARDTM Inserted” is displayed on the screen. If the channel information does not already exist, the message Incoming “Updating Channel List” is Cable or displayed during channel Antenna information configuration. Please insert the card as shown. The pairing information containing a telephone 2 number, CableCARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your Service Provider.

When channel information configuration is finished, the 3 message “Updating Completed” is displayed. It indicates that the channel list is now updated.

English - 24 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 25

Connecting a Camcorder

You can use your camcorder to view tapes without using a VCR.

Locate the A/V output jacks Camcorder on the camcorder. They are 1 usually found on the side or TV Rear Panel back of the camcorder. 1 Camcorder Connect a set of audio Output Jacks cables between the AUDIO 2 IN jacks on the TV and the AUDIO OUT jacks on the camcorder. If you have a mono Camcorder, connect L(mono) to the Camcorder audio out using only one 2 audio cable.

Connect a video cable 3 between the VIDEO IN (or 3 S-VIDEO IN) jack on the TV and the VIDEO OUT jack on the Camcorder. The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your Camcorder is stereo, you need to connect a set of two cables.

English - 25 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 26

Connections

Connecting a DVD Player

The rear panel jacks on your TV make it easy to connect a DVD player to your TV.

Connecting to Y,PB,PR 2 Connect a set of audio TV Rear Panel cables between the 1 COMPONENT (1 or 2) AUDIO (L,R) IN jacks on the 1 TV and the AUDIO OUT jacks on the DVD player.

To enable Component video viewing, connect a set of 2 video cables between the COMPONENT (1 or 2) VIDEO (Y, PB, PR) IN jacks on the TV and VIDEO DVD Player (Y/PB/PR or Y/CB/CR) OUT jacks on the DVD player.

Note: For an explanation of Component video, see your Incoming Cable or DVD player's owner's Antenna manual.

Connecting to Audio and Video Jacks Connect a set of audio cables between the AUDIO TV Rear Panel 1 IN (1 or 2) jacks on the TV and the AUDIO OUT jacks DVD Player on the DVD player.

Connect a video cable between the VIDEO IN (1 1 2 or 2) jack on the TV and the VIDEO OUT jack on the DVD player. 2

Incoming Cable or Antenna

English - 26 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 27

Connecting a DTV Set-Top Box

Connecting to Y,PB,PR Connect a set of audio cables between the 1 COMPONENT (1 or 2) 2 AUDIO (L,R) IN jacks on the Incoming 1 Cable or TV and the AUDIO OUT Antenna jacks on the Set-Top Box.

Connect a set of video cables between the 2 COMPONENT (1 or 2) VIDEO (Y, PB, PR) IN jacks on the TV and VIDEO TV Rear Panel DTV Set-Top Box (Y/PB/PR or Y/CB/CR) OUT jacks on the Set-Top Box. Note: For an explanation of Component video, see your Set-Top Box owner's manual.

Connecting to DVI (Digital Visual Interface)

Connect a set of audio TV Rear Panel cables between the DVI 1 AUDIO (L,R) IN jacks on the TV and the AUDIO OUT 1 jacks on the Set-Top Box. 2

Connect an HDMI/DVI video cable between the 2 HDMI/DVI IN jack on the TV and the DVI OUT jack on the Set-Top Box. Incoming Cable or Antenna NOTE DTV Set-Top Box • Requires a Cable Converter.

English - 27 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 28

Connections

Connecting to HDMI (High Definition Multimedia Interface) Connect an HDMI cable TV Rear Panel between the HDMI/DVI IN 1 jack on the TV and the HDMI OUT jack on the Set-Top Box.

NOTE • Make sure the HDMI/DVI Incoming source's power is on, or you Cable or will be unable to select it in the Antenna menu's source list.

DTV Set-Top Box

English - 28 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 29

Connecting a Digital Audio System There are many types of digital audio systems on the market today. A simplified illustration of an audio system is shown below. For more information, see your audio system owner’s manual.

If your audio system has a TV Rear Panel optical digital audio input, 1 connect to the “DIGITAL AUDIO OUT(OPTICAL)” jack on the TV.

NOTE • OPTICAL: converts the electric signal into an optical light signal, and transmits it through glass fibers. A transmission system of digital audio in the form of a light wave, S/PDIF format using a glass conductor. See page 80 to set the digital output format (Dolby Digital or Audio System PCM) appropriate to you digital audio component.

Connecting to an Analog Amplifier

The “AUDIO OUT” terminals TV Rear Panel cannot be used for external 1 speakers. You must hook them up to an amplifier. When an audio amplifier is connected to the “AUDIO OUT” terminals: Decrease the gain (volume) of the audio amplifier, and adjust the volume level with the volume control on the TV.

Amplifier

English - 29 SAMSUNG 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 30 Page PM 5:10 1/20/05 2_BP68-00448A-01(18~31) 2_BP68-00448A-01(18~31) 1/20/05 5:10 PM Page 31

Operation 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 32

Operation

Turning the TV On and Off

Press the POWER button on the remote control. You can also use the POWER button on the front panel.

Viewing the Menus and On-Screen Displays

The on-screen menu system allows you to control the settings of your TV. Access the on-screen menu system by pressing the MENU button on the remote control. Once the on-screen menu appears, use the …/†/œ/√/ENTER buttons on your remote control to select menu items and make adjustments. You can also view the on-screen menu system and make some adjustments using the TV’s front panel buttons.

Viewing the Menus Input Press the MENU button. Input Source List : TV √ The main menu is displayed. Edit Name √ 1 Picture There are six menu groups: Anynet Sound “Input”, “Picture”, “Sound”, Channel “Channel”, “Setup”, and Setup “Guide”. Guide Move Enter Exit

Picture Press the … or † button to Input Mode : Standard √ select an item you want √ 2 Picture Color Tone : Warm1 in the menu. Size : 16:9 √ Sound Press the œ, √ or ENTER Digital NR : On √ Channel DNIe : On √ button to display, change, My Color Control √ Setup or use the selected items. ▼ More Guide Use the ENTER button to Move Enter Return enter items in the menu. 3 Press the EXIT button to exit.

Viewing the Display

Press the INFO button on the Cable 3 remote control.

The TV displays the current Picture Mode Standard channel, the status of certain Sound Mode Custom MTS Stereo picture and sound settings and Caption Off the current time. V-Chip Off No Time Information The information displayed varies according to the selected source.

English - 32 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 33

Selecting a Menu Language

Setup Press the MENU button. Input Language : English √ Press the … or † button to √ 1 Picture Time select “Setup”, then press the V-Chip √ Sound ENTER button. Caption √ Channel Menu Transparency : Medium √ Blue Screen : Off √ Setup ▼ More Guide Move Enter Return

Setup Press the ENTER button to Input Language : EnglishEnglish select “Language”. Español 2 Picture Time Press the … or † button to V-Chip Français Sound select “English”, “Español” Caption Channel Menu Transparency : Medium or “Français”, then press the Blue Screen : Off Setup ENTER button. ▼ More Guide Move Enter Return Press the EXIT button to exit.

English - 33 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 34

Operation

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal Source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or cable system).

Channel Press the MENU button. Input Antenna : Cable √ Press the … or † button to √ 1 Picture Auto Program select “Channel”, then press Add/Delete √ Sound the ENTER button. Favorite Channels √ Channel Name √ Fine Tune √ Setup ▼ More Guide Move Enter Return

Channel Press the ENTER button to Input Antenna : AirCable select “Antenna”. Cable 2 Picture Auto Program Press the … or † button to Add/Delete Sound select “Air” or “Cable”, then Favorite Channels Channel Name press the ENTER button. Fine Tune Setup ▼ More Guide Move Enter Return

Channel Press the … or † button to Input Antenna : Cable √ 3 select “Auto Program”, then Auto Program √ Picture press the ENTER button. Add/Delete √ Sound Favorite Channels √ Channel Name √ Fine Tune √ Setup ▼ More Guide Move Enter Return

NOTE • All available DTV and analog channels are automatically stored in memory.

English - 34 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 35

Auto Program Press the … or † button to select the Input 4 Antenna connection, then press the ENTER Select the antennas to memorize. Picture button. Air Start Sound Cable Start • Air : “Air” antenna signal Channel Cable : “Cable” antenna signal Setup Air+Cable Start

Air+Cable : “Air” and “Cable” Guide antenna signals Move Enter Return • If the CableCARD is inserted into the “CableCARD” slot on the rear panel, “Cable” and “Air+Cable” are not available.

When selecting Cable TV system: Auto Program Input Select the cable system. Press the ENTER button to start the auto Analog Picture ✔ program. By default, the cable TV system STD Start HRC is set to “STD”. Sound IRC Channel Digital If you want to select another type of STD ✔ œ Setup HRC cable system, press the button and IRC Guide use the … or † button to select one of Move Enter Return Analog or Digital “STD”, “HRC” and “IRC”. Press the ENTER button.

• STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected. Proceed to “Storing Channels in Memory”.

Auto Program √ Press the button to select “Start”, then Input Select the cable system. press the ENTER button to start the auto Analog 5 Picture STD ✔ Start program. The TV begins memorizing all HRC Sound IRC available stations. Press the ENTER button Channel Digital STD ✔ at any time to interrupt the memorization Setup HRC IRC process. Guide Move Enter Return Press the EXIT button to exit. Auto Program

• The TV must be connected to an Auto Program in progress antenna in order to receive digital TV Cable Channel 44

signals. Even if a particular channel is Stop

deleted from the memory, you can Enter Return always tune to that channel directly by using the number buttons on the remote control.

English - 35 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 36

Operation

Adding and Erasing Channels

You can add channels that were not memorized (or delete unwanted channels from memory).

Channel Press the … or † button to Input Antenna : Cable √ 2 select “Add/Delete”, then Auto Program √ Picture press the ENTER button. Add/Delete √ Sound Favorite Channels √ Channel Name √ Fine Tune √ Setup ▼ More Guide Move Enter Return

Add/Delete Repeatedly pressing the 3 ENTER button will alternate Cable 26 Not In Memory between add channel and Press ENTER to add the channel. delete channel. Add Press the CH or CH Move Enter Return button to switch to the Add/Delete appropriate channel, then repeat above. Cable 26 In Memory Press ENTER to delete the channel.

Delete Press the EXIT button to exit. Move Enter Return

English - 36 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 37

Changing Channels Using the Channel Buttons

Press the CH or CH button to change channels.

When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels.) You will not see channels that were either erased or not memorized.

Using the Number Buttons Use the number buttons to quickly switch to any channel.

Press the number buttons to go directly to a channel. For example, to select channel 27, press “2,” then “7.” The TV will change channels when you press the second number.

Using the “-” Button The “-” button is used to select stations that broadcast both a digital and analog signal.

For example, for channel 7-1 DTV Air (digital), press “7”, then “-”, 7-1 then “1”. English Picture Mode Standard Sound Mode Standard MTS English Caption On V-Chip Off 5:21 am

For channel 7-2 (analog), press AIR 7-2 “7”, then “-”, then “2”. Mono Picture Mode Standard Sound Mode Standard MTS Stereo Caption On V-Chip Off NOTE 5:21 am • HD indicates the TV is receiving a Digital High Definition signal. Using the Previous Channel SD indicates the TV is Press the PRE-CH button. receiving a Analog The TV changes to the last channel you were watching. standard definition signal.

English - 37 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 38

Operation

Customizing Your Remote Control

Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD, and Samsung Set-Top Box (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung).

NOTE • The remote control might not be compatible with all VCRs, DVD players and Cable boxes.

Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) 1 Turn off your VCR (Cable box or DVD player). Press the MODE button to switch the remote control to the VCR 2 (CABLE or DVD) mode. The remote control has five modes: TV, STB, VCR, CABLE, and DVD. 3 On your Samsung remote control, press the SET button. Enter 3 digits of the VCR (Cable box or DVD player) code listed 4 on next page for your brand of VCR (Cable box or DVD player). Make sure you enter 3 digits of the code, even if the first digit is a “0”. (If more than one code listed, try the first one.)

Press the POWER button. Your VCR (Cable box or DVD player) 5 should turn on. If your VCR (Cable box or DVD player) turns on, your remote control is now set correctly. If your VCR (Cable box or DVD player) does not turn on, repeat steps 2, 3, and 4, but try one of the other codes listed for the brand of your particular VCR (Cable box or DVD player).

Once your remote control is set up, press the MODE button any 6 time you want to use the remote to operate your VCR (Cable box or DVD player).

NOTES • When your remote is in the TV mode, the VCR (or DVD player) control buttons (REW, STOP, PLAY/PAUSE, and FF) will still operate your VCR (or DVD player). • When your remote control is in the STB, VCR, CABLE, or DVD mode, the volume buttons still control your TV’s volume.

English - 38 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 39

Remote Control Codes

VCR Codes

Cable Box Codes

DVD Codes

English - 39 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 40

Operation

Setting the Clock

Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually Setup Press the MENU button. Input Language : English √ Press the … or † button to Time √ 1 Picture select “Setup”, then press V-Chip √ Sound Caption √ the ENTER button. Channel Menu Transparency : Medium √ Blue Screen : Off √ Setup ▼ More Guide Move Enter Return

Time Press the … or † button to Input --/ --/ ----/ -- : -- -- select “Time”, then press the 2 Picture ENTER button. Clock √ Sound Press the ENTER button to Sleep Timer : Off √ Channel On Timer : Inactivated √ select “Clock”. Off Timer : Inactivated √ Setup

Guide Move Enter Return

Clock Press the ENTER button to Input --/ --/ ----/ -- : -- -- select “Clock Mode”. 3 Picture Press the … or † button to Clock Mode : ManualAuto Sound Auto select “Manual”, then press Clock Set Channel Time Zone the ENTER button. DST : No Setup

Guide Move Enter Return

Clock Press the … or † button to Input --/ --/ ----/ -- : -- -- select “Clock Set”, then 4 Picture press the ENTER button. Clock Mode : Manual √ Sound Clock Set √ Channel Time Zone √ DST : No √ Setup

Guide Move Enter Return

Clock Set Press the œ or √ button to NOTE Input Set current date and time. move to “Month”, “Day”, • The current time will appear 5 Picture Month Day Year ▲ every time you press the “Year”, “Hour”, “Minute”, ------Sound ▼ or “am/pm”. Set the clock Hour Minute am/pm INFO button. Channel ------you want by pressing the Setup … or † button, then press Guide the ENTER button. Move Adjust Return •You can set the hour and minute directly by pressing the number buttons on the remote control. Press the EXIT button to exit. English - 40 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 41

Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal.

Setup Press the MENU button. … † Input Language : English √ 1 Press the or button to select “Setup”, Time √ Picture then press the ENTER button. V-Chip √ Sound Caption √ Channel Menu Transparency : Medium √ Blue Screen : Off √ Setup ▼ More Guide Move Enter Return

Time Press the … or † button to select “Time”, Input --/ --/ ----/ -- : -- -- 2 then press the ENTER button. Picture Press the ENTER button to select “Clock”. Clock √ Sound Sleep Timer : Off √ Channel On Timer : Inactivated √ Off Timer : Inactivated √ Setup

Guide Move Enter Return

Clock Press the ENTER button to select “Clock Input --/ --/ ----/ -- : -- -- Mode”. 3 Picture Press the … or † button to select “Auto”, Clock Mode : ManualAuto Sound Auto then press the ENTER button. Clock Set Channel Time Zone DST : No Setup

Guide Move Enter Return

Time Zone Press the … or † button to select “Time Input Select the time zone in which you live. Zone”, then press the ENTER button. Atlantic 4 Picture Eastern Sound Central Press the … or † button to highlight the Mountain Channel Pacific time zone for your local area (and to Alaska Setup Hawaii move the highlight to the appropriate time Guide zone on the map of the United States), Move Enter Return then press the ENTER button. • When you set up Auto Time, the set time may not be correct depending on the broadcasting station and signal. If there is a difference between the real time and set time, please set the time manually.

Clock Press the … or † button to select Input --/ --/ ----/ -- : -- -- “DST”(Daylight Saving Time), then press 5 Picture the ENTER button. Clock Mode : Auto Sound Press the … or † button to select “Yes” or Clock Set Channel Time Zone “No”, then press the ENTER button. DST : YesNo Setup No Guide Press the EXIT button to exit. Move Enter Return English - 41 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 42

Operation

Setting the On/Off Timer

Setup Press the MENU button. Input Language : English √ Press the … or † button to √ 1 Picture Time select “Setup”, then press V-Chip √ Sound the ENTER button. Caption √ Channel Menu Transparency : Medium √ Blue Screen : Off √ Setup ▼ More Guide Move Enter Return

Time Press the … or † button to Input 08/ 17/ 2004/ 10 : 20 am select “Time”, then press the 2 Picture ENTER button. Clock √ Sound Press the … or † button to Sleep Timer : Off √ Channel On Timer : Inactivated √ select “On Timer”, then Off Timer : Inactivated √ press the ENTER button. Setup Guide Press the … or † button to Move Enter Return adjust “Hour”, then press the √ button to move to the On Timer Input next step. Set on timer. Picture Hour Minute am/pm Antenna Set other items using the ▲ Sound 12 00 am Air same method as above. ▼ Channel Channel Volume Activation 3 10 No To activate On Timer with Setup the setting entered, set Guide Activation to on by pressing Move Adjust Return … or † button.

•You can set the hour and minute directly by pressing the number buttons on the remote control.

▲ ▲

When finished, press the MENU button to return.▼ ▼

Off Timer Press the … or † button to Input select “Off Timer”, then Set off timer. 3 Picture Hour Minute am/pm Activation press the ENTER button. ▲ Sound 12 00 am No Press the … or † button to ▼ Channel adjust “Hour”, then press Setup the √ button to move to the Guide next step. Set other items Move Adjust Return using the same method as above.

To activate Off Timer with the setting entered, set Activation to on by pressing … or † button.

When finished, press the MENU button to return.

English - 42 3_BP68-00448A-01(32~53) 1/21/05 11:19 AM Page 43

Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (from 30 to 180 minutes).

Time Press the … or † button to Input 08/ 17/ 2004/ 10 : 20 am select “Time”, then press the 2 Picture ENTER button. Clock √ Sound √ Press the … or † button to Sleep Timer : Off Channel On Timer : Inactivated √ select “Sleep Timer”, then Off Timer : Inactivated √ Setup press the ENTER button. Guide Move Enter Return

Sleep Timer Press the … or † button to Input adjust “Minute”. Set sleep timer. 3 Picture Minute Activation ▲ --- No Sound ▼ Channel Setup

Guide Move Adjust Return

Sleep Timer Setting the Timer sets the Input Activation to ‘Yes’ Set sleep timer. 4 Picture Minute Activation automatically. Sound 030 Yes

Channel Press the EXIT button to exit. Setup

Guide Move Adjust Return

Alternate method Press the SLEEP button on the remote control repeatedly until the appropriate time interval appears (any of the preset values from “30 min” to “180 min”).

Sleep Timer : 90 min

English - 43 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 44

Operation

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment, such as a VCR, DVD, Set-Top box or the TV source (broadcast or cable).

Setting the Signal Source Input Press the MENU button. Input Source List : TV √ Press the ENTER button to Edit Name √ 1 Picture Anynet select “Input”. Sound

Channel Setup

Guide Move Enter Return

Source List Press the ENTER button to Input TV select “Source List”. AV1 --- 2 Picture Press the … or † button to AV2 --- Sound select a signal source, then S-Video1 --- Channel S-Video2 --- press the ENTER button. Component1 --- Setup ▼ More • When you connect Guide Move Enter Return equipment to the TV, you can choose between the following sets of jacks: “AV1”, “AV2”, “S-Video1”, “S-Video2”, “Component1”, “Component2” or “HDMI/DVI” on the TV’s rear panel. • HDMI input can be selected only when the external device is turned on and connected to the TV.

Alternate method

Press the SOURCE button on the AV1 remote control repeatedly to select an external signal source.

English - 44 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 45

Assigning Names to External Input Mode

This feature enables you to name the input source you have connected.

Input Press the MENU button. Input Source List : TV √ Press the ENTER button to √ 1 Picture Edit Name select “Input”. Anynet Sound

Channel Setup

Guide Move Enter Return

Input Press the … or † button to Input Source List : TV √ 2 to select “Edit Name”, then Edit Name √ Picture press the ENTER button. Anynet Sound

Channel Setup

Guide Move Enter Return

Edit Name Press the … or † button to Input AV1 : --- √ select a signal source to √ 3 Picture AV2 : --- edit, then press the ENTER S-Video1 : --- √ Sound button. S-Video2 : --- √ Channel Component1 : --- √ Component2 : --- √ Setup HDMI : --- √ Guide Move Enter Return

Edit Name Press the … or † button to Input AV1 :------select the external device : AV2 :VCR --- 4 Picture S-Video1 :DVD --- VCR, DVD, D-VHS, Cable D-VHS Sound STB, HD STB, Satellite STB, S-Video2 Cable STB Channel Component1 HD STB PVR STB, AV Receiver, DVD Component2 Satellite STB Setup PVR STB Receiver, GAME, Camcorder, HDMI ▼ Guide DVD Combo, DVD HDD Move Enter Return Recorder, Internet TV Recv., Interactive TV Recv, VOD (Video On Demand) STB, TV.

Press the ENTER button. Set other signal sources (AV2, S-Video1, S-Video2, Component1, Component2, HDMI) using the same method as listed above.

Press the EXIT button to exit.

English - 45 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 46

Operation

English - 46 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 47

Channel Control 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 48

Channel Control

Selecting Your Favorite Channels

You can store your favorite channels for each available input source (such as TV and CATV). This allows you to quickly and easily find frequently watched channels by pressing the FAV.CH button on the remote control.

To Store Your Favorite Channels: Channel Press the MENU button. Input Antenna : Air √ Press the … or † button to √ 1 Picture Auto Program select “Channel”, then press Add/Delete √ Sound √ the ENTER button. Favorite Channels Channel Name √ Fine Tune √ Setup ▼ More Guide Move Enter Return

Favorite Channels Press the … or † button to Input ✔ select “Favorite Channels”, Air 2 Select All 2 Air 3 Picture then press the ENTER button. Air 4 Clear All Sound Press the … or † button to Air 5 Channel Air 6 select a channel, then press Air 7 Setup the ENTER button and a Air 8 Guide check mark will appear. Move Enter Return Press the ENTER button again to deselect the selected channel and the check mark will disappear.

Press the EXIT button to exit.

NOTES • Only memorized channels can be set as Favorite channels. • Select All : Press to select all channels. • Clear All : Press to clear all channels.

To View Your Favorite Channels: Press the FAV.CH button repeatedly to jump from one favorite channel to another.

English - 48 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 49

Labeling the Channels

Use this feature to assign an easy-to-remember label to analog channels (i.e., “CBS”, “ESPN”, “PBS2”, CNN02”, etc.) A label consists of five fields, where each field is a letter, a number or a blank. When the INFO button is pressed, the channel label will appear below to the channel number.

Press the CH or CH button to tune to the channel that 1 will be labeled.

Channel Press the MENU button. … † Input Antenna : Air √ 2 Press the or button to Auto Program √ Picture select “Channel”, then press Add/Delete √ Sound the ENTER button. Favorite Channels √ Channel Name √ Press the … or † button to Fine Tune √ Setup select “Name”, then press ▼ More Guide the ENTER button. Move Enter Return

Name Press the …/†/œ/√ button Input ▲ to move to the channel to be Air 2 A Clear OK 3 Picture ▼ assigned to a new name, Air 3 Clear Sound then press the ENTER button. Air 4 Clear Channel Air 5 Clear Press the … or † button to Air 6 Clear Setup select a letter, a number or a Guide blank. (Results in this Move Adjust Return sequence: A...Z, 0...9, +, -, ✽, /, blank).

Name Press the √ button to switch Input ▲ to the next field, which will Air 2 CNN02 Clear OK 4 ▼ Picture be selected. Air 3 Clear Sound Select a second letter or digit Air 4 Clear Channel Air 5 Clear pressing … or † button, as Air 6 Clear Setup above. Guide Repeat the process to select Move Adjust Return the last three digits. NOTE When you have finished, •If you add or delete a press the ENTER button. TV channel, the To erase the assigned new labeled channels will name, select “Clear” by also be added or pressing the …/†/œ/√ deleted. button, then press the ENTER button.

Press the EXIT button to exit.

English - 49 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 50

Channel Control

Fine Tuning Analog Channels Analog

Use fine tuning to manually adjust a particular channel for optimal reception.

Channel Press the … or † button to Input Antenna : Cable √ select “Fine Tune”, then press √ 2 Picture Auto Program the ENTER button. Add/Delete √ Sound Favorite Channels √ Channel Name √ Fine Tune √ Setup ▼ More Guide Move Enter Return

Fine Tune Press the œ or √ button to 3 adjust the fine tuning. Cable 26 Not Fine Tuned 3

Reset

Adjust Save Return

Fine Tune To store the fine tuning 4 setting in the TV’s memory, Cable 26 Fine Tuned press the ENTER button. 3

To reset the fine tuning Reset setting, press the † button to Adjust Save Return NOTE select “Reset”, then press the • Only analog TV ENTER button. channels can be fine Fine Tune tuned. Press the EXIT button to exit. 5 Cable 26 Not Fine Tuned 0

Reset

Move Enter Return

English - 50 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 51

Checking the Digital-Signal Strength Digital

Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital channels.

Channel Press the MENU button. Input Antenna : Cable √ Press the … or † button to Auto Program √ 1 Picture select “Channel”, then press Add/Delete √ Sound Favorite Channels √ the ENTER button. Channel Name √ Fine Tune √ Setup ▼ More Guide Move Enter Return

Channel Press the … or † button to Input ▲ More select “Signal Strength”, √ 2 Picture Signal Strength LNA : Off √ then press the ENTER button. Sound

Channel Setup

Guide Move Enter Return

If the signal strength meter Signal Strength indicates that the signal is Input weak, physically adjust your Picture antenna to increase the Sound

signal strength. Continue to Channel adjust the antenna until you Setup OK find the best position with Guide Enter Return the strongest signal.

Press the EXIT button to exit.

English - 51 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 52

Channel Control

LNA (Low Noise Amplifier)

If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal).

Channel Press the MENU button. Input Antenna : Air √ Press the … or † button to √ 1 Picture Auto Program select “Channel”, then press Add/Delete √ Sound the ENTER button. Favorite Channels √ Channel Name √ Fine Tune √ Setup ▼ More Guide Move Enter Return

Channel Press the … or † button to Input ▲ More select “LNA”, then press the √ 2 Picture Signal Strength ENTER button. LNA : On √ Sound

Channel Setup

Guide Move Enter Return

Channel Press the … or † button to Input ▲ More select “On”, then press the 3 Picture Signal Strength ENTER button. LNA : OffOn Sound On

Channel Pressing the … or † button Setup will alternate between “On” Guide and “Off”. Move Enter Return 4 Press the EXIT button to exit.

NOTE • LNA functions only when antenna is set to AIR. The settings will be stored separately in each channel.

English - 52 3_BP68-00448A-01(32~53) 1/20/05 5:11 PM Page 53

Picture Control 4_BP68-00448A-01(54~73) 1/20/05 5:13 PM Page 54

Picture Control

You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”, and “Tint” according to personal preference. (Alternatively, you can use one of the automatic settings. See next page.)

Customizing the Picture Picture Press the MENU button. Input Mode : Standard √ Press the … or † button to √ 1 Picture Color Tone : Warm1 select “Picture”, then press Size : 16:9 √ Sound the ENTER button. Digital NR : On √ Channel DNIe : On √ My Color Control √ Setup ▼ More Guide Move Enter Return

Mode Press the ENTER button to Input Mode : Standard √ select “Mode”. 2 Picture Contrast 90 Brightness 50 Sound Sharpness 65 Channel Color 55 Tint G 50 R 50 Setup Reset Guide Move Enter Return

Press the … or † button to ▲ select a particular item, then Contrast 90 3 ▼ press the ENTER button.

Press the œ or √ button to decrease or increase the value of a particular item.

Resetting the Picture Settings to the Factory Defaults You can return to the factory default picture settings. Press the MENU button to Mode NOTE Input Mode : Standard √ display the “Mode” menu. 4 Contrast 90 •“Tint” doesn’t operate Picture Press the … or † button to Brightness 50 in HDMI/DVI or 480p- Sound select “Reset”, then press the Sharpness 65 Component or higher Channel Color 55 ENTER button. Tint G 50 R 50 modes. Setup The previously adjusted Reset Guide picture settings will be reset Move Enter Return to the factory defaults.

English - 54 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 55

Using Automatic Picture Settings Your TV has automatic picture settings (“Dynamic”, “Standard” and “Cinema”) that are preset at the factory. You can select “Standard” which automatically recalls your personalized picture settings.

Picture Press the MENU button. … † Input Mode : Standard √ 1 Press the or button to select Color Tone : Warm1 √ Picture “Picture”, then press the ENTER button. Size : 16:9 √ Sound Digital NR : On √ Channel DNIe : On √ My Color Control √ Setup ▼ More Guide Move Enter Return

Mode Press the ENTER button to select “Mode”. Input Mode : Standard √ 2 Contrast 90 Picture Brightness 50 Sound Sharpness 65 Channel Color 50 Tint G 50 R50 Setup Reset Guide Move Enter Return

Press the ENTER button again to select Mode “Mode”. Input Mode StandardDynamic 3 ContrastStandard 90 Picture Press the … or † button to select a BrightnessCinema 50 particular item, then press the ENTER Sound Sharpness 65 Channel Color 50 button. Tint G 50 R50 Setup Reset Guide Press the EXIT button to exit. Move Enter Return

• Choose “Dynamic” for viewing the TV during the day or when there is a bright light in the room. •Choose “Standard” for the standard factory settings. • Choose “Cinema” when viewing a movie.

English - 55 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 56

Picture Control

Selecting the Color Tone

Picture Press the MENU button. Input Mode : Standard √ Press the … or † button to √ 1 Picture Color Tone : Warm1 select “Picture”, then press Size : 16:9 √ Sound the ENTER button. Digital NR : On √ Channel DNIe : On √ My Color Control √ Setup ▼ More Guide Move Enter Return

Picture Press the … or † button to Input Mode : Standard √ select “Color Tone”, then √ 2 Picture Color Tone : Warm1 press the ENTER button. Size : 16:9 √ Sound Digital NR : On √ Channel DNIe : On √ My Color Control √ Setup ▼ More Guide Move Enter Return

Picture Press the … or † button to Input Mode : Standard select “Cool2”, “Cool1”, Cool2 3 Picture Color Tone : Warm1 Size Cool1 “Normal”, “Warm1”, or Normal Sound Digital NR : On “Warm2”, then press the Warm1 Channel DNIe : OnWarm2 ENTER button. My Color Control Setup ▼ More Guide Press the EXIT button to exit. Move Enter Return

NOTE • Color tone is not available in the “Cinema” picture mode.

English - 56 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 57

Changing the Picture Size

You can select the picture size which best corresponds to your viewing requirements.

Picture Press the MENU button. Input Mode : Standard √ Press the … or † button to √ 1 Picture Color Tone : Warm1 select “Picture”, then press Size : 16:9 √ Sound the ENTER button. Digital NR : On √ Channel DNIe : On √ Press the … or † button to My Color Control √ Setup select “Size”, then press the ▼ More Guide ENTER button. Move Enter Return

Size Press the œ or √ button to Input select the screen format you 2 Picture want, then press the ENTER Sound button. 16:9 Panorama Zoom1 Zoom2 4:3 Channel Setup Press the EXIT button to exit. Guide Move Enter Return

Alternate method

Press the ASPECT button on the remote control repeatedly to select one of the picture size settings. • “16:9”: Sets the picture to 16:9 wide mode. • “Panorama”: Use this mode for the wide aspect ratio of a panoramic picture. • “Zoom1”: Magnifies the size of the picture on screen. • “Zoom2”: Magnifies the size of the picture more than “Zoom1”. You can also move the picture on screen using the scrooll function. Press the … or † button to scroll the picture. • “4:3”: Sets the picture to 4:3 normal mode. This is a standard TV screen size.

NOTE •You can select only the 16:9 and 4:3 screen sizes in the Component (720p, 1080i) mode.

English - 57 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 58

Picture Control

Digital Noise Reduction

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

Picture Press the … or † button to Input Mode : Standard √ select “Digital NR”, then √ 2 Picture Color Tone : Warm1 press the ENTER button. Size : 16:9 √ Sound Digital NR : On √ Channel DNIe : On √ My Color Control √ Setup ▼ More Guide Move Enter Return

Picture Press the … or † button to Input Mode : Standard select “Off” or “On”, then 3 Picture Color Tone : Warm1 press the ENTER button. Size : 16:9 Sound Digital NR : OffOn Channel DNIe : On Press the EXIT button to exit. My Color Control Setup ▼ More Guide Move Enter Return

English - 58 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 59

DNIeTM (Digital Natural Image engine)

This feature brings you a more detailed image with 3D noise reduction and detail, contrast and white enhancement.

Picture Press the … or † button to Input Mode : Standard √ select “DNIe”, then press the √ 2 Picture Color Tone : Warm1 ENTER button. Size : 16:9 √ Sound Digital NR : On √ Channel DNIe : On √ My Color Control √ Setup ▼ More Guide Move Enter Return

Picture Press the … or † button to Input Mode : Standard select “Off”, “Demo” or 3 Picture Color Tone : Warm1 “On”, then press the ENTER Size : 16:9 Sound button. Digital NR : On Channel DNIe : OffOn My Color Control Demo Setup On Press the EXIT button to exit. ▼ More Guide Move Enter Return

Alternate method Press the DNIe button on the remote control repeatedly to select one of the settings.

DNIe Demo

• On: Switches on the DNIe mode. DNIe On DNIe Off •Off: Switches off the DNIe mode. • Demo: The screen before applying DNIe appears on the right and the screen after applying DNIe appears on the left.

English - 59 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 60

Operation

Setting the My Color Control Mode

My Color Control allows users to adjust colors according to their preferences, by adjusting skin, sky, and grass tones using the predefined settings (“Blue”, “Green”, “Pink”, “Standard”, and “Custom”) without affecting other colors on the screen.

Using the Easy Control Menu Picture Press the MENU button. Input Mode : Standard √ Press the … or † button to √ 1 Picture Color Tone : Warm1 select “Picture”, then press Size : 16:9 √ Sound the ENTER button. Digital NR : On √ Channel DNIe : On √ My Color Control √ Setup ▼ More Guide Move Enter Return

Picture Press the … or † button to Input Mode : Standard √ 2 select “My Color Control”, Color Tone : Warm1 √ Picture then press the ENTER button. Size : 16:9 √ Sound Digital NR : On √ Channel DNIe : On √ My Color Control √ Setup ▼ More Guide Move Enter Return

My Color Control Press the ENTER button to Input Easy Control : Custom √ 3 select “Easy Control”. Detail Control √ Picture Press the œ or √ button to Sound select one of the picture Channel settings you want. Setup The original picture (before Guide adjustment) is shown Move Enter Return on the left side, while the selected mode is shown on the right side. Original Custom

Press the ENTER button to accept the selected mode. Easy Control NOTES œ Standard Custom • Changing the settings Press the EXIT button to exit. Move Enter Return in the “Detail Control” menu (see next page) • “Blue”: Emphasizes Clear Blues. will automatically set the My Color Control • “Green”: Emphasizes Mild Greens. mode to “Custom”. • “Pink”: Emphasizes Warm Skin Colors. • The My Color Control • “Standard”: Standard Picture. feature operates only when "DNIe" is set to "On" and “Demo” mode. English - 60 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 61

Custom Settings Picture Press the MENU button. Input Mode : Standard √ Press the … or † button to √ 1 Picture Color Tone : Warm1 select “Picture”, then press Size : 16:9 √ Sound the ENTER button. Digital NR : On √ Channel DNIe : On √ Press the … or † button to My Color Control √ Setup select “My Color Control”, ▼ More Guide then press the ENTER button. Move Enter Return

My Color Control Press the … or † button to Input Easy Control : Custom √ 2 select “Detail Control”, then Detail Control √ Picture press the ENTER button. Sound

Channel Setup

Guide Move Enter Return

Detail Control Press the … or † button to Input Pink 50 select the desired My Color 3 Picture Green 50 Control, then press the Blue 50 Sound ENTER button. Reset Channel There are three colors: Setup “Pink”, “Green” and “Blue”. Guide Move Enter Return Press the œ or √ button to adjust the value of a color selected. Original Compare Changing the adjustment value will refresh the Detail Control adjusted screen. ▲ Pink 50 ▼ Move Adjust Return

Resetting the My Color Control Colors to the Factory Defaults You can return to the factory default settings for My Color Control colors. Detail Control Press the MENU button to Input Pink 50 4 display the “Detail Control” Green 50 Picture menu. Blue 50 Press the … or † button to Sound Reset select “Reset”, then press the Channel Setup ENTER button. Guide The previously adjusted My Move Enter Return Color Control Colors will be reset to the factory defaults.

English - 61 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 62

Picture Control

Using the Color Weakness Enhancement Feature

This feature adjusts the Red, Blue or Green color to enhance the picture according to the user's particular color weakness.

Setup Press the … or † button to Input ▲ More select “Color Weakness”, √ 2 Picture Color Weakness then press the ENTER button. Function Help : Off √ Sound CableCARDTM √ Channel CableCARDTM Setup √ Setup

Guide Move Enter Return

Color Weakness Press the ENTER button to Input Color Weakness : OnOff select “Color Weakness”. RedOn 0 3 Picture Press the … or † button to Green 0 Sound select “On”, then press the Blue 0 Channel ENTER button. Setup

Guide Move Enter Return

Color Weakness Press the … or † button to Input Color Weakness : On √ select a color to be 4 Picture Red 0 adjusted, then press the Green 0 Sound ENTER button. Blue 0 Channel Setup Press the œ or √ button to Guide adjust the value of a color Move Enter Return selected. Color Weakness ▲ Press the EXIT button to exit. Red 0 ▼ Move Adjust Return

NOTE •You can also select these options (Red, Green or Blue) by pressing the … or † button.

English - 62 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 63

Setting the Film Mode

You can automatically sense and process film signals from all sources and adjust the picture for optimum quality.

Picture Press the … or † button to Input ▲ More select “Film Mode”, then √ 2 Picture Film Mode : Off press the ENTER button. PIP √ Sound

Channel Setup

Guide Move Enter Return

Picture Press the … or † button to Input ▲ More select “Off” or “On”, then Off 3 Picture Film Mode : Off press the ENTER button. PIP On Sound

Channel Press the EXIT button to exit. Setup

Guide Move Enter Return

NOTE • Film mode is supported in 480i only.

English - 63 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 64

Picture Control

Viewing Picture-In-Picture

One of the most best features of your TV is the Picture-In-Picture (PIP) feature. The advanced PIP system allows you to watch two different pictures at once, even if you don’t have a VCR or DVD connected to your TV.

Activating the PIP

Picture Press the MENU button. Input Mode : Standard √ Press the … or † button to Color Tone : Warm1 √ 1 Picture select “Picture”, then press Size : 16:9 √ Sound Digital NR : On √ the ENTER button. Channel DNIe : On √ My Color Control √ Setup ▼ More Guide Move Enter Return

Picture Press the … or † button to Input ▲ More select “PIP”, then press the Film Mode : Off √ 2 Picture PIP √ ENTER button. Sound

Channel Setup

Guide Move Enter Return

PIP Press the ENTER button to Input PIP : OffOff select “PIP”. On 3 Picture Source : TV Press the … or † button to Swap Sound select “On”, then press the Size Channel Position ENTER button. Air/CATV : Air Setup The sub picture appears in Channel : Air 3 Guide the corner of the screen. Move Enter Return

Press the EXIT button to exit.

Alternate method Press the PIP button on the remote control repeatedly to activate or deactivate the PIP.

NOTES • This feature doesn’t function when the “V-Chip” is active. • If you turn the TV off while watching and turn it on again, then the mode will return to normal video. • Digital broadcasting is not available in PIP.

English - 64 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 65

Selecting an External Source

You can use PIP to view a signal from an external source, such as a VCR.

Picture Press the … or † button to Input ▲ More select “PIP”, then press the √ 2 Picture Film Mode : Off ENTER button. PIP √ Sound

Channel Setup

Guide Move Enter Return

PIP Press the … or † button to Input PIP : On select “Source”, then press 3 Picture Source : TVTV Swap AV1 the ENTER button. AV2 Sound Size If you have not connected S-Video1 Channel Position S-Video2 any equipment to the TV’s Air/CATV : Component1Air Setup input jacks, the signal from Channel : Component2AIR 3 Guide these inputs will not appear. Move Enter Return

Press the … or † button to select an external signal, then press the ENTER button.

Press the EXIT button to exit.

NOTE • For more information about external signals, see “Viewing an External Signal Source” (See page 44). If you select “TV”, the sub picture will be the same as the main picture.

English - 65 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 66

Picture Control

Swapping the Sub Picture and Main Picture

Picture Press the … or † button to Input ▲ More select “PIP”, then press the √ 2 Picture Film Mode : Off ENTER button. PIP √ Sound

Channel Setup

Guide Move Enter Return

Press the … or † button to PIP select “Swap”, then press Input PIP : On √ 3 Source : TV √ Picture the ENTER button. Swap Sound The sub picture appears in Size √ Channel Position √ the main picture, and vice Air/CATV : Air √ Setup versa. Channel : Air 3 √ Guide Move Enter Return Press the EXIT button to exit.

NOTE •SWAP is not available when the Main picture is a Digital broadcast.

English - 66 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 67

Changing the Size of the Sub Picture

Picture Press the … or † button to Input ▲ More select “PIP”, then press the √ 2 Picture Film Mode : Off ENTER button. PIP √ Sound

Channel Setup

Guide Move Enter Return

Press the … or † button to PIP select “Size”, then press the Input PIP : On 3 Source : TV Picture ENTER button. Swap Sound Size Channel Position Press the … or † button to Air/CATV : Air Setup select a size you want, then Channel : Air 3 Guide press the ENTER button. Move Enter Return

Press the EXIT button to exit.

English - 67 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 68

Picture Control

Changing the Location of the Sub Picture

Picture Press the … or † button to Input ▲ More select “PIP”, then press the √ 2 Picture Film Mode : Off ENTER button. PIP √ Sound

Channel Setup

Guide Move Enter Return

Press the … or † button to PIP select “Position”, then press Input PIP : On 3 Source : TV Picture the ENTER button. Swap Sound Size Channel Position Press the … or † button to Air/CATV : Air Setup select a position you want, Channel : AIR 3 Guide then press the ENTER button. Move Enter Return

Press the EXIT button to exit.

NOTE • The Double ( , ) mode cannot be selected in Position.

English - 68 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 69

Changing the Channel of the Sub Picture

After you set the signal source (antenna or cable) of the sub picture, it is easy to change channels.

Picture Press the … or † button to Input ▲ More select “PIP”, then press the √ 2 Picture Film Mode : Off ENTER button. PIP √ Sound

Channel Setup

Guide Move Enter Return

PIP Press the … or † button to Input PIP : On select “Channel”, then press 3 Picture Source : TV the ENTER button. Swap Sound Size Channel Position Press the … or † button to Air/CATV : Air ▲ Setup Air 11 select a channel you want, Channel : Air 3 ▼ Guide then press the ENTER button. Move Enter Return

Press the EXIT button to exit.

• Air : “Air” antenna signal Cable : “Cable” antenna signal

Alternate method Press the CH or CH button under the cover of the remote control to change the sub picture channels while PIP is on.

English - 69 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 70

Picture Control

Selecting the Sound Source

You can use this feature to hear sound from the main or sub (PIP) picture.

Press the … or † button to Sound 2 select “Sound Select”, then Input ▲ More Picture Digital Output : PCM press the ENTER button. Sound Select : Main Press the … or † button to Sound Melody : SubOn select “Main” or “Sub”, then Channel press the ENTER button. Setup

Guide Press the EXIT button to exit. Move Enter Return

English - 70 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 71

Freezing the Picture

Press the STILL button to freeze a moving picture. (Normal sound will still be heard.)

Press again to cancel.

NOTE • In the PIP mode, the main and sub pictures are stilled at the same time.

English - 71 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 72

Picture Control

Setting the Blue Screen Mode

If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the “Blue Screen” mode to “Off”.

Setup Press the … or † button to Input Language : English √ select “Blue Screen”, then √ 2 Picture Time press the ENTER button. V-Chip √ Sound Caption √ Channel Menu Transparency : Medium √ Blue Screen : Off √ Setup ▼ More Guide Move Enter Return

Setup Press the … or † button to Input Language : English select “On” or “Off”, then 3 Picture Time press the ENTER button. V-Chip Sound Caption Channel Menu Transparency : Medium Press the EXIT button to exit. Blue Screen : OffOff Setup ▼ More On Guide Move Enter Return

English - 72 4_BP68-00448A-01(54~73) 1/20/05 5:14 PM Page 73

Sound Control 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 74

Sound Control

You can control and customize the sound levels and settings of the TV with the remote control.

Adjusting the Volume Press the VOL+ or VOL– buttons to increase or decrease the volume.

Using the MUTE Button At any time, you can temporarily cut off the sound. Press the MUTE button on the remote control. The message “Mute” is displayed and the sound cuts off. Mute

To turn mute off, press the MUTE button again or press either the VOL+ or VOL– button.

Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the automatic settings. See next page.)

Sound Press the MENU button. Input Mode : Standard √ Press the … or † button to √ 1 Picture Equalizer select “Sound”, then press SRS TSXT : Off √ Sound the ENTER button. Multi-Track Options √ Channel Auto Volume : Off √ Internal Mute : Off √ Setup ▼ More Guide Move Enter Return

Sound Press the … or † button to Input Mode : Standard √ select “Equalizer”, then √ 2 Picture Equalizer press the ENTER button. SRS TSXT : Off √ Sound Multi-Track Options √ Channel Auto Volume : Off √ Internal Mute : Off √ Setup ▼ More Guide Move Enter Return

Continued...

English - 74 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 75

Equalizer Press the œ or √ button to select a Input particular item to be changed. 3 Picture R + Press the … or † button to increase or Sound 0 decrease the selected frequency. Channel L - Setup 100 300 1K 3K 10K Press the EXIT button to exit. Guide Move Adjust Return

Using Automatic Sound Settings Your TV has automatic sound settings (“Standard”, “Music”, “Movie”, and “Speech”) that are preset at the factory. You can select “Custom”, which automatically recalls your personalized sound settings.

Sound Press the MENU button. Input Mode : Standard √ Press the … or † button to select “Sound”, √ 1 Picture Equalizer then press the ENTER button. SRS TSXT : Off √ Sound Multi-Track Options √ Channel Auto Volume : Off √ Internal Mute : Off √ Setup ▼ More Guide Move Enter Return

Sound Press the ENTER button to select “Mode”. Input Mode : StandardCustom Press the … or † button to select a Music 2 Picture Equalizer SRS TSXT : MovieOff particular item, then press the ENTER Speech Sound Multi-Track Options button. Custom Channel Auto Volume : Off Internal Mute : Off Setup Press the EXIT button to exit. ▼ More Guide Move Enter Return

•Choose “Standard” for the standard factory settings. • Choose “Music” when watching music videos or concerts. •Choose “Movie” when watching movies. • Choose “Speech” when watching a show that is mostly dialog (i.e., news). •Choose “Custom” to recall your personalized settings.

English - 75 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 76

Sound Control

Setting the SRS TSXT

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Trusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

Sound Press the … or † button to Input Mode : Standard √ select “SRS TSXT”, then √ 2 Picture Equalizer press the ENTER button. SRS TSXT : Off √ Sound Multi-Track Options √ Channel Auto Volume : Off √ Internal Mute : Off √ Setup ▼ More Guide Move Enter Return

Sound Press the … or † button to Input Mode : Standard select “Off”, “3D Mono” or 3 Picture Equalizer Off “Stereo”, then press the SRS TSXT : Off Sound 3D Mono ENTER button. Multi-Track Options Stereo Channel Auto Volume : Off Internal Mute : Off Setup Press the EXIT button to exit. ▼ More Guide Move Enter Return

Alternate method Press the SRS button on the remote control repeatedly to select one of the settings.

English - 76 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 77

Auto Volume

Each broadcasting station has its own signal conditions, and it is inconvenient to adjust the volume every time the channel is changed. “Auto Volume” automatically adjusts the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

Sound Press the … or † button to Input Mode : Standard √ select “Auto Volume”, then √ 2 Picture Equalizer press the ENTER button. SRS TSXT : Off √ Sound Multi-Track Options √ Channel Auto Volume : Off √ Internal Mute : Off √ Setup ▼ More Guide Move Enter Return

Sound Press the … or † button to Input Mode : Standard select “Off” or “On”, then 3 Picture Equalizer press the ENTER button. SRS TSXT : Off Sound Multi-Track Options Channel Auto Volume : OffOff Press the EXIT button to exit. Internal Mute : OnOff Setup ▼ More Guide Move Enter Return

English - 77 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 78

Sound Control

Choosing a Multi-Channel Sound (MTS) track Digital

The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional “multitracks” depends upon the program.

Press the MENU button. Sound Press the … or † button to Input Mode : Standard √ 1 √ Picture Equalizer select “Sound”, then press SRS TSXT : Off √ the ENTER button. Sound Multi-Track Options √ Channel Auto Volume : Off √ • Quick way to access the Internal Mute : Off √ Setup MTS menu: Just press the ▼ More Guide MTS button on the Move Enter Return remote control. You can listen in a language other than the favorite language by pressing the MTS button.

Press the … or † button to Sound select “Multi-Track Options”, Input Mode : Standard √ 2 √ Picture Equalizer then press the ENTER button. SRS TSXT : Off √ Sound Multi-Track Options √ Channel Auto Volume : Off √ • The text at the bottom of Internal Mute : Off √ Setup the menu tells you if the ▼ More Guide incoming audio is Move Enter Return Spanish, French or English.

Press the ENTER button to Multi-Track Options Input Preferred Language : EnglishEnglish 3 select “Preferred Language”. Español Multi-Track Sound : Stereo Press the … or † button to Picture Français choose the language Sound (English, Español or Channel Français) you want, then Setup

press the ENTER button. Guide Move Enter Return Press the EXIT button to exit.

English - 78 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 79

Choosing a Multi-Channel Sound (MTS) track Analog

Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.

Sound Press the MENU button. Input Mode : Standard √ Press the … or † button to Equalizer √ 1 Picture select “Sound”, then press SRS TSXT : Off √ Sound Multi-Track Options √ the ENTER button. Channel Auto Volume : Off √ Internal Mute : Off √ Setup ▼ More Guide Move Enter Return

Sound Press the … or † button to Input Mode : Standard √ select “Multi-Track Options”, √ 2 Picture Equalizer then press the ENTER button. SRS TSXT : Off √ Sound Multi-Track Options √ Channel Auto Volume : Off √ Internal Mute : Off √ Setup ▼ More Guide Move Enter Return

Press the … or † button to Multi-Track Options select “Multi-Track Sound”, Input Preferred Language : English 3 Mono Picture Multi-Track Sound : Stereo then press the ENTER button. Stereo Press the … or † button to Sound SAP select a setting you want, Channel then press the ENTER button. Setup

Guide Press the EXIT button to exit. Move Enter Return

Alternate method Press the MTS button on the remote control repeatedly to select an external signal source.

Stereo

NOTES • Choose “Mono” for channels that are broadcasting in mono, or if you are having difficulty receiving a stereo signal. • Choose “Stereo” for channels that are broadcasting in stereo. • Choose “SAP” to listen to the Separate Audio Program, which is usually a foreign-language translation.

English - 79 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 80

Sound Control

Choosing a Digital Sound Format Digital

Digital sound can be output from the rear-panel connector on your TV. The digital sound output is an optical connector labeled “Optical Out”. After connecting an optical digital-audio component, you must specify the transmission format (Dolby or PCM, as appropriate to your digital audio component). See the owner's manual of your Digital Audio component for further information.

Press the MENU button. Sound 1 Press the … or † button to Input Mode : Standard √ √ Picture Equalizer select “Sound”, then press SRS TSXT : Off √ the ENTER button. Sound Multi-Track Options √ Channel Auto Volume : Off √ Internal Mute : Off √ Setup ▼ More Guide Move Enter Return

Press the … or † button to Sound select “Digital Output”, then Input ▲ More 2 Dolby Digital Picture Digital Output : PCM press the ENTER button. Sound Select : PCMMain Press the … or † button to Sound Melody : On select “Dolby Digital” or Channel “PCM”, then press the Setup

ENTER button. Guide Move Enter Return Press the EXIT button to exit.

Manufactured under license from Dolby Laboratories. “Dolby” and the double D-symbol are trademarks of Dolby Laboratories.

English - 80 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 81

Selecting the Internal Mute

When using a device such as a Home Theater or Amplifier with external speakers, you can set Internal Mute to On to cut off sound from the TV's internal speakers.

Press the … or † button to Sound 2 select “Internal Mute”, then Input Mode : Standard √ √ press the ENTER button. Picture Equalizer SRS TSXT : Off √ Sound Multi-Track Options √ Channel Auto Volume : Off √ Internal Mute : Off √ Setup ▼ More Guide Move Enter Return

Sound … † Press the or button to Input Mode : Standard select “On”, then press the 3 Picture Equalizer ENTER button. SRS TSXT : Off Pressing the … or † button Sound Multi-Track Options will alternate between “On” Channel Auto Volume : Off Internal Mute : OffOff Setup On and “Off”. ▼ More Guide Press the EXIT button to exit. Move Enter Return

NOTES • The VOL +, VOL - and Mute buttons do not operate when the Internal Mute is set to On. • When Internal Mute is on, only Multi-Track Options and Melody menu are available.

English - 81 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 82

Sound Control

Setting the On/Off Melody

A melody sound can be set to come on when the TV is powered On or Off.

Press the … or † button to Sound 2 select “Melody”, then press Input ▲ More Picture Digital Output : PCM the ENTER button. Sound Select : Main Sound Press the … or † button to Melody : OffOn select “On” or “Off”, then Channel On press the ENTER button. Setup

Guide Press the EXIT button to exit. Move Enter Return

English - 82 5_BP68-00448A-01(74~83) 1/20/05 5:15 PM Page 83

Special Features 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 84

Special Features

Setting the Function Help

Displays Help on the menu functions.

Press the MENU button. Setup Press the … or † button to Input Language : English √ 1 Time √ Picture select “Setup”, then press V-Chip √ the ENTER button. Sound Caption √ Channel Menu Transparency : Medium √ Blue Screen : Off √ Setup ▼ More Guide Move Enter Return

Setup Press the … or † button to select “Function Help”, then Input ▲ More 2 Color Weakness √ Picture press the ENTER button. Function Help : Off √ Sound CableCARDTM √ Channel CableCARDTM Setup √ Setup

Guide Move Enter Return

Setup Press the … or † button to select “On”, then press the Input ▲ More 3 Color Weakness Picture ENTER button. Function Help : OffOff Sound CableCARDTM On Press the EXIT button to exit. Channel CableCARDTM Setup Setup

Guide Move Enter Return

Activates Function Help. Provides references for each menu items.

English - 84 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 85

Menu Transparency Level

Adjusts the transparency of the menu screen.

Setup Press the … or † button to select “Menu Transparency”, Input Language : English 2 Time Picture then press the ENTER button. V-Chip Press the … or † button to Sound Caption Channel Menu Transparency : HighMedium select level, then press the Medium Blue Screen : Off Setup Low ENTER button. ▼ More Opaque Guide Move Enter Return Press the EXIT button to exit.

English - 85 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 86

Special Features

Using the V-Chip Access to channels and programs is controlled by a password (i.e., a 4-digit secret code that is defined by the user). The on-screen menu will instruct you to assign a password (you can change it later, if necessary).

How to Change Your Password Setup Press the MENU button. Input Language : English √ Press the … or † button to √ 1 Picture Time select “Setup”, then press V-Chip √ Sound the ENTER button. Caption √ Channel Menu Transparency : Medium √ Press the … or † button to Blue Screen : Off √ Setup select “V-Chip”, then press ▼ More Guide the ENTER button. Move Enter Return

V-Chip Press the number buttons to Input 2 enter your current 4-digit pin Enter PIN Picture number, then press the * ENTER button. Sound (The default pin number for Channel a new TV set is “0000”.) Setup Guide The “V-Chip” menu is 0~9 Enter PIN Return displayed.

V-Chip Press the … or † button to select “Change PIN”, then Input V-Chip Lock : Off √ 3 TV Parental Guidelines √ Picture press the ENTER button. MPAA Rating √ Sound Change PIN √ Channel Setup

Guide Move Enter Return

Press the number buttons to Change PIN Input 4 enter your new 4-digit pin Enter New PIN number. Picture Re-enter your new pin Sound Confirm New PIN number to confirm. Channel Setup

Guide Press the EXIT button to exit. 0~9 Enter PIN Return

NOTES •The PIP doesn’t function when the V-Chip is active. • If you forget the pin number, press the remote control buttons in the following sequence, which resets the pin to 0-0-0-0: POWER (Off), MUTE, 8, 2, 4, POWER (On). • The V-Chip function only works in RF ,AV mode and S-Video mode.

English - 86 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 87

How to Enable/Disable the Rating Controls

Setup Press the MENU button. … † Input Language : English √ 1 Press the or button to Time √ Picture select “Setup”, then press V-Chip √ the ENTER button. Sound Caption √ … † Channel Menu Transparency : Medium √ Press the or button to Blue Screen : Off √ Setup select “V-Chip”, then press ▼ More Guide the ENTER button. Move Enter Return

V-Chip Press the ENTER button to Input V-Chip Lock : Off 3 select “V-Chip Lock”. TV Parental GuidelinesOn Picture Press the … or † button to MPAA Rating select “On”, then press the Sound Change PIN ENTER button. Channel Setup

Guide Press the EXIT button to exit. Move Enter Return

English - 87 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 88

Special Features

How to Set up Restrictions Using the “TV Parental Guidelines”

The parental restrictions can be set up using either of two methods: The “TV Parental Guidelines” or “MPAA Rating”.

Setup Press the MENU button. Press the … or † button to Input Language : English √ 1 Time √ Picture select “Setup”, then press V-Chip √ the ENTER button. Sound Caption √ Press the … or † button to Channel Menu Transparency : Medium √ Blue Screen : Off √ Setup select “V-Chip”, then press ▼ More the ENTER button. Guide Move Enter Return

V-Chip Press the number buttons to Input 2 enter your current 4-digit pin Enter PIN Picture number, then press the * ENTER button. Sound (The default pin number for Channel a new TV set is “0000”.) Setup The “V-Chip” menu is Guide 0~9 Enter PIN Return displayed.

V-Chip Press the … or † button to select “TV Parental Input V-Chip Lock : On √ 3 TV Parental Guidelines √ Picture Guidelines”, then press the MPAA Rating √ ENTER button. Sound Change PIN √ Channel Setup

Guide Move Enter Return

English - 88 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 89

You can independently lock the TV TV Parental Guidelines ratings. The locked TV (FCC) ratings are Input ALL FV V S L D 4 TV-Y Picture Allow All indicated by the symbol “ ”. TV-Y7 Sound Block All Press the …/†/œ/√ buttons and the TV-G Channel TV-PG ENTER button to activate the appropriate TV-14 restrictions for TV (FCC) rating system. Setup TV-MA Guide Move Enter Return TV-Y : Young children TV-Y7 : Children 7 and over NOTE TV-G : General audience • Allow All : Press to unlock TV-PG : Parent Guidance all TV ratings. TV-14 : Viewers 14 and over Block All : Press to lock all TV-MA : Mature Audience TV ratings.

Press the EXIT button to exit.

NOTES • These categories consist of two separate groups: “TV-Y” and “TV-Y7” (young children through age 7), and “TV-G” through “TV-MA” (everybody else). • The restrictions for these two groups work independently: If a household includes very young children as well as young adults, the TV parental guidelines must be set up separately for each age group. (See page 91.)

English - 89 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 90

Special Features

How to Set up Restrictions Using the “MPAA Rating”

The Movie rating system uses the “MPAA” (Motion Picture Association of America) system, and its main application is for movies. When the rating control is on, the TV will automatically block any programs that are coded with objectionable ratings (either “MPAA Rating” or “TV Parental Guidelines”).

Press the MENU button. Setup Press the … or † button to Input Language : English √ 1 √ Picture Time select “Setup”, then press V-Chip √ the ENTER button. Sound Caption √ Press the … or † button to Channel Menu Transparency : Medium √ Blue Screen : Off √ select “V-Chip”, then press Setup ▼ More the ENTER button. Guide Move Enter Return

Press the number buttons to V-Chip Input 2 enter your current 4-digit pin Enter PIN Picture number, then press the * ENTER button. Sound (The default pin number for Channel a new TV set is “0000”.) Setup

The “V-Chip” menu is Guide displayed. 0~9 Enter PIN Return

Press the … or † button to V-Chip 3 select “MPAA Rating”, then Input V-Chip Lock : On √ √ Picture TV Parental Guidelines press the ENTER button. MPAA Rating √ Sound Change PIN √ Channel Setup

Guide Move Enter Return

MPAA Rating You can independently lock Input 4 the movie ratings. The locked Block Picture G Allow All movie ratings are indicated PG Sound PG-13 Block All by the symbol “ ”. R NC-17 Press the …/†/ENTER Channel X buttons to activate the Setup NR appropriate restrictions for Guide movie rating system. Move Enter Return Press the EXIT button.

NOTE • Allow All : Press to unlock all movie ratings. Block All : Press to lock all movie ratings.

English - 90 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 91

Important Notes About Parental Locks Explanation of the MPAA and TV (FCC) Rating Systems:

TV (FCC) Age-Based Ratings TV-G General audience. It contains little or no TV-MA violence, no strong language, and little or no Mature audiences only. This program may sexual dialog or situations. contain mature themes, profane language, graphic violence and explicit sexual content. TV-Y7 Directed to older children. Themes and TV-14 elements in this program may include mild Parents strongly cautioned. This program may physical or comedic violence, or may frighten contain sophisticated themes, sexual content, children under the age of seven. strong language and more intense violence. TV-Y TV-PG All children. The themes and elements in this Parental guidance suggested. The program program are specifically designed for a very may contain infrequent coarse language, young audience, including children from ages limited violence, some suggestive sexual two – six. dialog and situations.

TV (FCC) Content Category MPAA Rating System (Movies) G General audience. No restriction. V Violence. S Sexual content. PG Children under 13 should be L Offensive language. accompanied by an adult. D Dialog sexual innuendo. PG-13 Parental guidance suggested. Children FV Fantasy or cartoon violence. under 13 should be accompanied by an adult. R Restricted. Viewers should be 17 or older. NC-17 Not classified. Viewers should be 17 or older. X Adults only. NR Not rated.

• TV (FCC) ratings : The particular rating that you have selected will be locked (and indicated as a red “L” on a blue background). Also, all of the age-based ratings will be locked within the particular group (i.e., “group 1” or “group 2”). Suppose that the TV-G rating and all of its contents (V, S, L, and D) are locked. In that case, more restrictive ratings (TV-PG, TV-14, and TV-MA) and all of their contents (V, S, L, and D) are automatically locked as well. •MPAA ratings : The particular rating that you have selected will be locked. In addition, more restrictive ratings will be locked as well. • Neither TV (FCC) ratings nor MPAA ratings apply to news programs.

English - 91 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 92

Special Features

Viewing Closed Captions (On-Screen Text Messages) Analog

The Analog Caption function operates in either analog RF channel mode or external signal mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)

Press the MENU button. Setup Press the … or † button to Input Language : English √ 1 √ Picture Time select “Setup”, then press V-Chip √ the ENTER button. Sound Caption √ Channel Menu Transparency : Medium √ Blue Screen : Off √ Setup ▼ More Guide Move Enter Return

Press the … or † button to Setup select “Caption”, then press Input Language : English √ 2 √ Picture Time the ENTER button. V-Chip √ Sound Caption √ Channel Menu Transparency : Medium √ Blue Screen : Off √ Setup ▼ More Guide Move Enter Return

Press the ENTER button to Caption select “Caption”. Input Caption : OffOn 3 On Picture Mode : Default Caption Options Press the … or † button to Sound select “On”, then press the Channel ENTER button. Setup

Guide Move Enter Return

English - 92 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 93

Press the … or † button to select “Mode”, Caption then press the ENTER button. Input Caption : DefaultOn 4 CC1 Mode : Default Press the … or † button to select submenu Picture CC2 Caption Options CC3 (CC1~CC4 or Text1~Text4) you want, Sound CC4 Channel Text1 then press the ENTER button. Text2 Setup Text3 † Press the EXIT button to exit. Guide Move Enter Return

NOTES • The default is “CC1”. CC1 : The Primary Synchronous Caption Service. These are captions in the primary language that must be in sync with the sound, preferably matched to a specific frame. CC2 : The Special NonSynchronous Use Captions. This channel carries data that is intended to augment information carried in the program. CC3 : Secondary Synchronous Caption Service. Alternate program-related caption data, typically second language captions. CC4 : Special Non-Synchronous Use Captions. Similar to CC2. Text1 : First Text Service. This may be various non-program related data. Text2 : Second Text Service. Additional data, usually not program related. Text3/Text4 : Third and Fourth Text Services. These data channels should be used only if Text1 and Text2 are not sufficient. • The Caption feature only works in RF, AV and S-Video mode. • The availability of captions depends on the program being broadcast.

English - 93 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 94

Special Features

Viewing Closed Captions (On-Screen Text Messages) Digital

The Digital Captions function operates on digital channels.

Press the MENU button. Setup 1 Press the … or † button to Input Language : English √ √ Picture Time select “Setup”, then press V-Chip √ the ENTER button. Sound Caption √ Channel Menu Transparency : Medium √ Blue Screen : Off √ Setup ▼ More Guide Move Enter Return

Press the … or † button to Setup 2 select “Caption”, then press Input Language : English √ √ Picture Time the ENTER button. V-Chip √ Sound Caption √ Channel Menu Transparency : Medium √ Blue Screen : Off √ Setup ▼ More Guide Move Enter Return

Guide Move Enter Return

Press the … or † button to Caption select “Mode”, then press Input Caption : DefaultOn 4 Service1 Mode : Default the ENTER button. Picture Service2 Caption Options Service3 Press the … or † button to Sound Service4 select submenu (Service1 Channel Service5 Service6 ~Service6, CC1~CC4 or Setup CC1 † Text1~Text4) you want, then Guide press the ENTER button. Move Enter Return

Press the … or † button to Caption 5 select “Caption Options”, Input Caption : On Picture Mode : Default then press the ENTER button. Caption Options NOTE Sound Channel • “Caption Options” are Setup available only when Guide “Service1~ Service6” can Move Enter Return be selected in “Mode”.

English - 94 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 95

Press the … or † button to select “Size”, Caption Options then press the ENTER button. Input Size : Default √ 6 √ … † Picture Font Style : Default Press the or button to select one you Foreground Color : Default √ want, then press the ENTER button. Sound Background Color : Default √ Set other listed options below using the Channel Foreground Opacity: Default √ Background Opacity: Default √ same method as above. Setup Return to Default Press the EXIT button to exit. Guide Move Enter Return NOTES • The availability of captions depends on the program being broadcast.

Size This option consists of “Default”, “Small”, “Standard”, and “Large”. The default is “Standard”. Font Style This option consists of “Default”, “Style0 ~ Style 7”. You can change the font you want. The default is “Style 0”. Foreground Color This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”, “Yellow”, “Magenta”, and “Cyan”. You can change the color of the letter. The default is “White”. Background Color This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”, “Yellow”, “Magenta”, and “Cyan”. You can change the background color of the caption. The default is “Black”. Foreground Opacity This option consists of “Default”, “Transparent”, “Translucent”, “Solid”, and “Flashing”. You can change the opacity of the letter. Background Opacity This option consists of “Default”, “Transparent”, “Translucent”, “Solid”, and “Flashing”. You can change the background opacity of the caption. Return to Default This option sets each of “Size”, “Font Style”, “Foreground Color”, “Background Color”, “Foreground Opacity”, and “Background Opacity” Color to its default.

Alternate method Press the CAPTION button on the remote control repeatedly to select “On” or “Off”.

Caption On

English - 95 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 96

Special Features

Using the CableCARD

This menu works with a CableCARD provided by a local cable service provider. Prior to accessing this menu, a CableCARD should be connected to the rear panel of the TV. For detailed connection instructions refer to the “Connecting CableCARD” section on page 24 of this manual.

Displaying CableCARD related information To access information on Status, Pairing, Network Setup of the CableCARD provided by the service provider in CableCARD menu.

Setup Press the … or † button to select “CableCARDTM”, then Input ▲ More 2 Color Weakness √ Picture press the ENTER button. Function Help : Off √ Sound CableCARDTM √ Channel CableCARDTM Setup √ Setup

Guide Move Enter Return 3 Press the EXIT button to exit.

English - 96 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 97

Using the CableCARD Setup Function

Sets up relevant CableCARD options.

CableCARD Reset Resets CableCARD when the channels provided by CableCARD are not available.

Setup Press the … or † button to select “CableCARDTM Setup”, Input ▲ More 2 Color Weakness √ Picture then press the ENTER button. Function Help : Off √ Sound CableCARDTM √ Channel CableCARDTM Setup √ Setup

Guide Move Enter Return

CableCARDTM Setup Press the ENTER button to TM TM Input CableCARD Reset 3 select “CableCARD Reset”. Channel List Reorganization Picture Sound

Channel Setup

Guide Move Enter Return

English - 97 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 98

Special Features

Channel List Reorganization Deletes and reorganizes the channel list provided by CableCARD.

Guide Move Enter Return

CableCARDTM Setup Press the ENTER button to Input CableCARDTM Reset 3 select “Channel List Channel List Reorganization Reorganization”. Picture Sound

Channel Setup

Guide Move Enter Return

English - 98 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 99

Using the Guide

You can display a list of all channels or your favorite channels.

Guide Press the MENU button. Input Channel List √ Press the … or † button to √ 1 Picture Edit Channel List Favorite Channel List √ select “Guide”, then press Sound

the ENTER button. Channel Setup

Guide Move Enter Return

Channel List Press the … or † button to All select “Channel List” or ▲ More 2 29 37 45 30 38 46 “Favorite Channel List”, then 31 39 47 32 40 48 press the ENTER button. 33 41 49 34 42 50 35 43 51 36 44 52 To toggle between your ▼ More Previous Next Favorite Exit favorite channels or all Move Watch Return channels, use the Yellow button.

• Red button: Press to display the previous channel list page. Green button: Press to display the next channel list page. Yellow button: Press to toggle between your favorite channels or all channels. Blue or EXIT button: Press to exit.

Alternate method Channel List Press the CH.LIST button All

on the remote control to 21020 31121 display a list of channels. 41222 51324 61425 71526 81727 91928 ▼ More Next Favorite Exit Move Watch Exit

English - 99 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 100

Special Features

Adding and Erasing Channels

Guide Press the MENU button. Input Channel List √ Press the … or † button to √ 1 Picture Edit Channel List Favorite Channel List √ select “Guide”, then press Sound

the ENTER button. Channel Setup

Guide Move Enter Return

Guide Press the … or † button to Input Channel List √ select “Edit Channel List”, √ 2 Picture Edit Channel List then press the ENTER button. Favorite Channel List √ Sound

Channel Setup

Guide Move Enter Return

Channel List Press the … or † button to Add/Delete 3 change channels you want 6 8 10 to add or delete. 12 Repeatedly pressing ENTER button will alternate between “Add” and “Delete”. Add All Delete All Move Delete Return •Yellow button : Press to add all channels Blue button : Press to delete all channels

Press the MENU button to 4 exit.

English - 100 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 101

Appendix

English - 101 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 102

Appendix

Troubleshooting

If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center.

Problem Possible Solution

Poor picture quality. Try another channel. Adjust the antenna. Check all wire connections.

Poor sound quality. Try another channel. Adjust the antenna. Make sure the MUTE button is off.

No picture or sound. Try another channel. Press the SOURCE button. Make sure the TV is plugged in. Check the antenna connections.

No color, wrong colors or tints. Make sure the program is broadcasted in color. Adjust the picture settings.

Picture rolls vertically. Adjust the antenna. Check all wire connections. If you are using a VCR, check the tracking.

The TV operates erratically. Unplug the TV for 30 seconds, then try operating it again.

Your remote control does not Press the MODE button to put your remote control operate your TV. into TV mode. Make sure the remote has batteries.

The TV won’t switch on. Make sure the wall outlet is working. Make sure the TV is plugged in. Make sure the remote has batteries.

Digital broadcasting screen Please check the digital signal strength and input problem. antenna.

• The display panel used for the DLP TV is composed of many tiny pixels. These pixels may occasionally appear on the screen.

English - 102 6_BP68-00448A-01(84~103) 1/20/05 5:18 PM Page 103

Cleaning and Maintaining Your TV

With proper care, your TV will give you many years of service. Please follow these guidelines to get the maximum performance from your TV.

Placement • Do not put the TV near extremely hot, cold, humid or dusty places. • Do not place the TV near appliances with electric motors that create magnetic fields, such as vacuum cleaners. • Keep the ventilation openings clear; do not place the TV on a soft surface, such as cloth or paper. • Place the TV in a vertical position only.

Liquids • Do not handle liquids near or on the TV. Liquids that spill into it can cause serious damage.

Cabinet • Never open the cabinet or touch the parts inside. •Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or chemicals. • Do not put heavy objects on top of the cabinet. • This DLP TV projects the image onto a large screen by applying an optical system. If you place the TV set face down, it might cause a problem because dirt, or some other contaminant may become attached to the inside of the TV set.

Temperature • If your TV is suddenly moved from a cold to a warm place, unplug the power cord, and allow at least two hours for moisture that may have formed inside the unit to dry completely. Using Your TV in Another Country

If you plan to take your TV with you to a foreign country, please be aware of the different television systems that are in use around the world. A TV designed for one system may not work properly with another system due to differences in the TV channel frequencies. Specifications

Model HL-R5087W HL-R5687W Voltage AC 120V AC 120V Frequency of Operation 60Hz 60Hz Power Consumption 230 watts 230 watts Dimensions 53.58 x 20.47 x 54.64 inches 58.70 x 21.89 x 58.34 inches (W x D x H) 1361 x 520 x 1388 mm 1491 x 556 x 1482 mm Weight 57.9 Kg / 127.65 lbs 62 Kg / 136.68 lbs

English - 103 0_BP68-00448A-01(cover) 1/20/05 5:03 PM Page 2

DLPTV

1-800-SAMSUNG (1-800-726-7864)

Samsung Electronics America Service Division 400 Valley Road, Suite 201 Mount Arlington, NJ 07856 www.samsung.com

Samsung Electronics Canada Inc. Samsung Customer Care 7037 Financial Drive Mississauga, Ontario L5N 6R3 www.samsung.ca

BP68-00448A-01