Parallel Port Floppy Disk Drive
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Power Mac G4 (Digital Audio): Setting up (Manual)
Setting Up Your Power Mac G4 Includes setup and expansion information for Power Mac G4 and Macintosh Server G4 computers K Apple Computer, Inc. © 2001 Apple Computer, Inc. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Apple. The Apple logo is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Use of the “keyboard” Apple logo (Option-Shift-K) for commercial purposes without the prior written consent of Apple may constitute trademark infringement and unfair competition in violation of federal and state laws. Every effort has been made to ensure that the information in this manual is accurate. Apple is not responsible for printing or clerical errors. Apple Computer, Inc. 1 Infinite Loop Cupertino, CA 95014-2084 408-996-1010 http://www.apple.com Apple, the Apple logo, AppleShare, AppleTalk, FireWire, the FireWire logo, Mac, Macintosh, the Mac logo, PlainTalk, Power Macintosh, QuickTime, and Sherlock are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. AirPort, the Apple Store, Finder, iMovie, and Power Mac are trademarks of Apple Computer, Inc. PowerPC and the PowerPC logo are trademarks of International Business Machines Corporation, used under license therefrom. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. © 1992–1997 Dolby Laboratories, Inc. All rights reserved. Other company and product names mentioned herein are trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. -
1 Port PCI Express Low Profile Parallel Adapter Card - SPP/EPP/ECP
1 Port PCI Express Low Profile Parallel Adapter Card - SPP/EPP/ECP Product ID: PEX1PLP The PEX1PLP PCIe Parallel Adapter card can be installed in a PCI Express (PCIe) x1 slot, allowing you to connect EPP/ECP parallel peripherals to any computer, while relying on a native, single-chip design (Oxford OXPCIe952) that harnesses the capability of true PCI Express - ensuring maximum performance and reliability. This high performance SPP/EPP/ECP parallel card adds 1 DB25 parallel port, perfect for connecting printers, scanners, CD-R/RW drives, memory card readers, bar code scanners and more. With the added convenience of plug-and-play capability, installing the parallel adapter card is hassle-free! The PCIe Parallel card also includes both standard and half-height/low profile mounting brackets for compatibility with almost any system form factor. Backed by a StarTech.com 2-year warranty and free lifetime technical support. www.startech.com 1 800 265 1844 Certifications, Reports Applications and Compatibility • Connects any parallel-based peripheral to your PC, including printers, scanners, CD-R/RWs, Zip® drives, and memory card readers Features • SPP/EPP/ECP Parallel port fully supports existing Centronics interface • Packaged with low profile/half-height bracket attached, includes full profile bracket • Compliant with PCI Express Base Specification 1.1a • Compliant with PCI Power Management 1.2 www.startech.com 1 800 265 1844 Warranty 2 Years Hardware Bus Type PCI Express Card Type Low Profile (SP bracket incl.) Chipset ID PLX/Oxford - OXPCIe952 -
2 USB + 1 Parallel Internet Print Server
2 USB + 1 Parallel Internet Print Server CONNECT WHEREVER YOU WANT• WHENEVER YOU WANT CAREFREE NETWORKING HPS12U Connect Multiple Printers To A Network. Print From Any Computer Over The Internet/Intranet. Easy To Install And Use. 2 Year Warranty. PACKAGE CONTENTS: · One HPS12U 2 USB + 1 Parallel Port Printer · One A/C Power Adapter ·SetupDisk · Quick Installation Guide Print over the Internet/Intranet to your home or office networked printer! The Hawking HPS12U 2 USB + 1 Parallel port 10/100 Internet Print Server is a powerful and convenient tool to connect your USB and parallel printers to a 10/100M Network. Through its enhanced functionality, the HPS12U can support up to three printers at one time (2 USB + 1 Parallel). The Hawking HPS12U combined with the Internet Printing Protocol (IPP) lets you easily connect to any printer and print documents by specifying the print server's IP address. With IPP technology, printing over a WAN or the Internet becomes much easier. You can send a print job to a printer in another country just as easily as sending a print job to your home or office printer. IPP eliminates the need for fax communications between offices. Simply print an original document through the HPS12U's IPP capabilities and send it from one office to another. The print quality from IPP printing is equal to that of a document printed fromyour local office. The HPS12U will turn your printers into fully functional networked print stations. System Requirements: Windows 95/98/2000/NT/ME/XP, NetWare, Mac OS **, UNIX or LINUX 10Base-T Ethernet or 100Base-TX Fast Ethernet network Parallel Printer and/or USB Printer * The HPS12U is not compatible with multi-function printers. -
Designing PCI Cards and Drivers for Power Macintosh Computers
Designing PCI Cards and Drivers for Power Macintosh Computers Revised Edition Revised 3/26/99 Technical Publications © Apple Computer, Inc. 1999 Apple Computer, Inc. Adobe, Acrobat, and PostScript are Even though Apple has reviewed this © 1995, 1996 , 1999 Apple Computer, trademarks of Adobe Systems manual, APPLE MAKES NO Inc. All rights reserved. Incorporated or its subsidiaries and WARRANTY OR REPRESENTATION, EITHER EXPRESS OR IMPLIED, WITH No part of this publication may be may be registered in certain RESPECT TO THIS MANUAL, ITS reproduced, stored in a retrieval jurisdictions. QUALITY, ACCURACY, system, or transmitted, in any form America Online is a service mark of MERCHANTABILITY, OR FITNESS or by any means, mechanical, Quantum Computer Services, Inc. FOR A PARTICULAR PURPOSE. AS A electronic, photocopying, recording, Code Warrior is a trademark of RESULT, THIS MANUAL IS SOLD “AS or otherwise, without prior written Metrowerks. IS,” AND YOU, THE PURCHASER, ARE permission of Apple Computer, Inc., CompuServe is a registered ASSUMING THE ENTIRE RISK AS TO except to make a backup copy of any trademark of CompuServe, Inc. ITS QUALITY AND ACCURACY. documentation provided on Ethernet is a registered trademark of CD-ROM. IN NO EVENT WILL APPLE BE LIABLE Xerox Corporation. The Apple logo is a trademark of FOR DIRECT, INDIRECT, SPECIAL, FrameMaker is a registered Apple Computer, Inc. INCIDENTAL, OR CONSEQUENTIAL trademark of Frame Technology Use of the “keyboard” Apple logo DAMAGES RESULTING FROM ANY Corporation. (Option-Shift-K) for commercial DEFECT OR INACCURACY IN THIS purposes without the prior written Helvetica and Palatino are registered MANUAL, even if advised of the consent of Apple may constitute trademarks of Linotype-Hell AG possibility of such damages. -
Interfacing to a USB Printer Using Vinculum VNC1L Host Controller
Future Technology Devices International Ltd. Application Note AN_106 Interfacing to a USB Printer using Vinculum VNC1L Host Controller Document Reference No.: FT_000064 Version 1.0 Issue Date: 2008-11-24 This application note describes how to add printing capability to an embedded design via a USB interface using FTDI’s Vinculum Host controller VNC1L. VNC1L implements USB Printer Class and gives a command monitor port interface for controlling USB printers using standard PCL ASCII commands. Details of how a battery operated portable printer HP-DeskJet 460 printer was interfaced with Freescale’s 16-bit micro-controller HC12 using VNC1L on SPI monitor port are presented. This design can be applied to a variety of real-life embedded applications including medical portable devices, field tester devices, logistics, point of sales, rentals, queuing systems, ticketing system, gas receipts, etc. that require a printer interface. We highlight a product in the market Quantifit from OHD that uses VNC1L to provide USB printer capability to a field fitness testing device using the design in this application note. Future Technology Devices International Limited Unit 1, 2 Seaward Place, Centurion Business Park, Glasgow G41 1HH United Kingdom Tel.: +44 (0) 141 429 2777 Fax: + 44 (0) 141 429 2758 E-Mail (Support): [email protected] Web: http://www.ftdichip.com Copyright © 2008 Future Technology Devices International Limited Document Reference No.: FT_000064 Using Vinculum USB Host Controller Printer Interface Application Note AN_106 Version 1.0 Clearance No.: FTDI# 68 Table of Contents 1 Introduction............................................................................................ 2 2 Project framework ................................................................................. 3 2.1 Project Installation .............................................................................................. 3 2.2 Project Structure ................................................................................................ -
3 Parallel Port Multiprotocol Ethernet/Fast Ethernet Print Server
3 Parallel Port Multiprotocol Ethernet/Fast Ethernet Print Server Hardware User’s Guide Rev. 01 (May, 2000) About This Guide i Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spätern Gebrauch auf. 3. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Vervenden Sie keine Flüssig- oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Um eine Beschädigung des Gerätes zu vermeiden sollten Sie nur Zubehörteile verwenden, die vom Hersteller zugelassen sind. 5. Das Gerät is vor Feuchtigkeit zu schützen. 6. Bei der Aufstellung des Gerätes ist auf sichern Stand zu achten. Ein Kippen oder Fallen könnte Verletzungen hervorrufen. Verwenden Sie nur sichere Standorte und beachten Sie die Aufstellhinweise des Herstellers. 7. Die Belüftungsöffnungen dienen zur Luftzirkulation die das Gerät vor Überhitzung schützt. Sorgen Sie dafür, daß diese Öffnungen nicht abgedeckt werden. 8. Beachten Sie beim Anschluß an das Stromnetz die Anschlußwerte. 9. Die Netzanschlußsteckdose muß aus Gründen der elektrischen Sicherheit einen Schutzleiterkontakt haben. 10. Verlegen Sie die Netzanschlußleitung so, daß niemand darüber fallen kann. Es sollete auch nichts auf der Leitung abgestellt werden. 11. Alle Hinweise und Warnungen die sich am Geräten befinden sind zu beachten. 12. Wird das Gerät über einen längeren Zeitraum nicht benutzt, sollten Sie es vom Stromnetz trennen. Somit wird im Falle einer Überspannung eine Beschädigung vermieden. 13. Durch die Lüftungsöffnungen dürfen niemals Gegenstände oder Flüssigkeiten in das Gerät gelangen. Dies könnte einen Brand bzw. Elektrischen Schlag auslösen. 14. Öffnen Sie niemals das Gerät. Das Gerät darf aus Gründen der elektrischen Sicherheit nur von authorisiertem Servicepersonal geöffnet werden. -
Chapter 1 PC Architecture
Chapter PC Architecture THE FOLLOWING OBJECTIVES ARE COVERED IN THIS CHAPTER: 1 1.1 Identify the names, purpose, and characteristics, of system modules. Recognize these modules by sight or definition. 1.5 Identify the names, purposes, and performance characteristics, of standardized/common peripheral ports, associated cabling, and their connectors. Recognize ports, cabling, and connectors, by sight. COPYRIGHTED MATERIAL A personal computer (PC) is a computing device made up of many distinct electronic components that all function together in order to accomplish some useful task (such as adding up the numbers in a spreadsheet or helping you write a letter). By this definition, note that we’re describing a computer as having many distinct parts that work together. Most computers today are modular. That is, they have components that can be removed and replaced with a component of similar function in order to improve performance. Each component has a very specific function. In this chapter, you will learn about the components that make up a typical PC, what their function is, and how they work together inside the PC. Unless specifically mentioned otherwise, throughout this book the terms PC and computer can be used interchangeably. The components in most computers include: The case The power supply The motherboard The processor /CPU Memory Storage devices The adapter cards Display devices Ports and cables As you read this chapter, please keep in mind that many of these parts will be covered in more detail in later chapters. Figure 1.1 shows an example of a typical PC and illustrates how some of these parts fit together. -
Igel Ud6 for the Ambitious Knowledge Worker
DATA SHEET IGEL UD6 FOR THE AMBITIOUS KNOWLEDGE WORKER Maximum performance for maximum requirements! Our most ALL INCLUSIVE powerful hardware series sets a new standard in thin client computing. Because of its fast quad-core processor and fl exible expansion capability, the UD6 is the device of choice for the most demanding use scenarios. Video playback in Full HD, computer- Management Software aided design (CAD) or 3D applications – none pose the slightest problem for the new high-end model. Outfi tted with multiple interfaces, including USB 3.0 and PCIe slot, the UD6 series off ers you everything on your wish list. All Updates • Maximum Performance The highest processor and graphics performance for the mostdemanding tasks, e.g., Flash multimedia, CAD applications, videoplayback in Full HD. Technical Support • Free PCIe slot Customize the UD6 for individual needs via PCIe expansion cards, e.g., fiber optic network cards. Extended Warranty • Dualview support Parallel use of two digital monitors with a DVI and a DisplayPort. • Integrated smartcard reader (optional) Excellent for highly secure two factor authentication and fast login. • Connectivity bar (optional) Expand your device with a parallel port and WLAN or an anti-theft USB port. • No moving parts, e.g. cooling fans Because it contains no moving parts, the UD6 makes almost no noise, is nearly failsafe and produces minimal heat – even with high-performance usage. TECHNICAL SPECIFICATION SYSTEM Available Operating Systems IGEL Linux 10 (LX) or Microsoft Windows 10 IoT (W10) Management IGEL Universal Management Suite included Processor Intel Celeron J1900 1.99 - 2.42 GHz (Quad-Core) Chipset Intel Bay Trail SoC PCI-slot 1x (low profi le) MEMORY RAM (DDR3L) 2 GB (LX), 4 GB (W10) Flash Memory (SATA SSD) 4GB (LX), 32 GB (W10), larger SSD modules on request GRAPHICS Chipset Intel HD Graphics Video Memory 64–512MB Shared Memory Ports (Supported Resolutions) 1x DisplayPort 1.1a (max. -
Iomega Zip IDE Drive and Click “OK.” 9
drive TM 00 atapi 1 User’s Guide • Operating Your Zip Drive • Zip Tips • Iomega Tools Software • Special Information for Windows NT, Windows 95, and Windows/DOS User’s Guide Operating Your Zip Drive ................................................. 3 Zip Tips ............................................................................ 4 Iomega Tools Software ....................................................... 5 Special Information for Windows NT Users ...................... 6 Special Information for Windows 95 Users ....................... 9 Special Information for Windows/DOS Users ................. 12 2 Operating Your Zip Drive Use your Zip drive just like any other drive on your system. To access the Zip drive, insert a disk and select the Zip disk icon or drive letter. Store and copy files to and from the Zip drive using the same methods you use for other drives on your system. Disk Eject Button / Green Busy Light (Flashes when drive is transferring data or when inserting or ejecting a disk) Inserting and Removing Zip Disks Insert Gently! ® Disk Inserted Tools Eject Button / Green Busy Light Always turn on power to the computer before inserting a Zip disk. When you insert a Zip disk, the drive busy light will flash momentarily and go out. (If the light continues to blink slowly, push the disk eject button to eject the Zip disk, then reinsert it.) When you remove the Zip disk from the drive, store it in the protective case. It is not necessary to remove the Zip disk from the drive when you shut down your computer; however, if you desire to remove the Zip disk, do so before turning off power to your computer. CAUTION Never force a disk into or out of the Zip drive. -
Zip Drive Mini-HOWTO
Zip Drive Mini−HOWTO Zip Drive Mini−HOWTO Table of Contents Zip Drive Mini−HOWTO...................................................................................................................................1 Kyle Dansie, dansie@ibm.net.................................................................................................................1 1. Introduction..........................................................................................................................................1 2. Quick Start...........................................................................................................................................1 3. Configuring a kernel for the ZIP drive................................................................................................1 4. The ZIP drive.......................................................................................................................................1 5. Troubleshooting Install........................................................................................................................1 6. Using the ZIP drive..............................................................................................................................1 7. Performance.........................................................................................................................................1 8. Frequently asked questions..................................................................................................................2 9. Getting -
EN362000 Zip SCSI Manual
Portable SCSI Drive Owner’s Manual • Installation Guide (Quick Start instructions in blue & bold) • User’s Guide (Includes Iomega software information) • Troubleshooting • How to Get Help http://www.iomega.com Table of Contents Installation Guide Installation on a Mac or Mac-Compatible ................................... 4 Installation on a PC ..................................................................... 12 User’s Guide Operating Your Zip® Drive .......................................................... 22 Zip® Tips ........................................................................................ 25 Iomega Software ......................................................................... 26 Using Zip® Disks ............................................................................ 29 Using Zip® Disks Cross-Platform .................................................. 32 Connecting Your Zip® Drive in a SCSI Chain .............................. 33 Troubleshooting Green activity light does not come on or disk won’t insert .... 35 Zip® drive not recognized (PC and Mac systems) ...................... 35 Computer does not start properly after installing Zip® drive .. 36 Zip® drive is assigned multiple drive letters .............................. 37 You want to use Windows 95/98 DOS mode with Zip® drive ... 37 You want to change the drive letter assigned to Zip® drive .... 38 Zip® drive transfer speed seems slow ......................................... 38 Data transfer problems or drive operation is erratic ............... 39 -
ETHERNET INFORMATION Monarchâ Offers an Internal Ethernet Connectivity Solution
ETHERNET INFORMATION Monarchâ offers an internal Ethernet connectivity solution. The MonarchNetä Ethernet Print Server makes it easy to setup and configure printers on a network. It allows you to consistently configure your printers through the network. You can also remotely manage and download upgraded print batches, formats, printer configurations, and fonts. The MonarchNet print server supports the Monarchâ 9840ä (version 6.5 or greater) or Monarchâ 9850ä (version 1.0 or greater) printer linked to an Ethernet connection. The print server supports multiple network protocols for users with Telnet/FTP, Windowsâ 95/98/2000 or Windows NTâ, TCP/IP (including lpr/lpd, Bootp, DHCP, and HP JetDirectä), Novellâ NetWareâ and NDS, and SNMP. All protocols are simultaneously active. When turning on the printer or after sending a ^PR (printer reset) immediate command, wait at least eight (8) seconds before sending data to the print server. Any data sent to the print server before the 8-second interval may be lost. TC9840ENAD Rev. AC 3/01 ã1999 Monarch Marking Systems, Inc. All rights reserved. 9840,9850 and MonarchNet are trademarks of Monarch Marking Systems, Inc. Windows and NT are registered trademarks of Microsoft in the U.S. and other countries. NetWare is a registered trademark of Novell, Inc. in the United States and other countries. HP Jet Admin and HP Web Jet Admin are trademarks of Hewlett-Packard, Inc. Other products are trademarks or registered trademarks of their respective companies and are hereby acknowledged. Setting Up the Print Server For the 9840 printer: To use the Ethernet print server (with the 9840 printer), upper DIP switch 8 must be turned ON.