DOCSLIB.ORG

Power Tool Accessories and Hand Tools

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Power Tool Accessories and Hand Tools Power Tool Accessories and Hand Tools IVY Classic Industries, Inc. PC1010 40 Plain Avenue • New Rochelle, NY 10801 USA Tel: 914-632-8200 Fax: 914-632-6449 800-435-3867 800-552-2997 www.ivyclassic.com e-mail: [email protected] IVY Classic Industries, Inc. We Meet Your Needs IVY Classic is dedicated to manufacturing a comprehensive, high-quality line of power tool accessories and hand tools for the contracting, industrial and DIY markets. All our tools are subject to strict quality-control procedures From Our to ensure they meet our exacting Humble standardsstandards.. Beginning We continually update our package IVY Wrought Iron Works designs to help you effectively was established in 1929 by promote IVY Classic products. an English blacksmith named We use the latest in packing Albert George Story. Many of his materials, and our product cards original tools are on display at are bar coded and clearly labeled IVY Classic Industries. Originally with valuable information to make the name IVY was chosen as it any job easier. was made up of three letters that were all straight lines. These We are very proud of our straight letters could easily be complete assortment of display cut into any IVY product before merchandisers throughout the the company could afford a product line. Our merchandisers steel letter punch. Today IVY are carefully arranged to include Classic Industries is still the best-selling items in an a family-owned-and-operated organized, space-saving layout. business continuing the traditions of Mr. Albert George Story. We Set Very High Standards 2 IVY Classic Industries, Inc. Our ® Marketing Tools Lifetime WarrantyWarranty IVY Classici productsprod cts are ® warranted against defects in material and workmanship for the life of the tool. This warranty does not apply to normal wear and tear or damage caused by abuse, misuse or alteration. 100% Satisfaction If you are not completely satisfied TM with any new IVY Classic product, please advise us within 90 days, and ® we will gladly exchange the product Our marketing department is or issue a full credit at your request. always ready to help. We offer Buy with complete confidence. full-color catalogs, brochures and regular promotional materials to help you sell our products. In 100% addition, our extensive nationwide network of sales representatives Satisfaction makes effective use of our mobile show vans. Safety Warning To avoid risk of injury when using or in the vicinity of power tool accessories TM Our website offers you the or hand tools always wear safety convenience of placing an order goggles and other appropriate safety day or night. You can also track items for protection. Failure to do so can result in bodily injury. your order online. Visit our website: IVY Classic www.ivyclassic.com Industries, Inc. 40 Plain Avenue New Rochelle, NY 10801 USA Tel: 914-632-8200 Tel: 800-435-3867 Our Brands, Fax: 914-632-6449 Fax: 800-552-2997 Trademarks www.ivyclassic.com Today email: [email protected] Copyright © 2010 IVY Classic Industries, Inc. Information subject to change without notice. 3 Display and Planogram Programs OUR DISPLAY PROGRAM We have 137 different displays to make ordering easy. Throughout the catalog you will see this display symbol. It indicates that the products are available in an easy-to-order display. All of our displays contain the most popular tools and sizes. With each display RECEIVE FREE ▪ Colorful header. ▪ Fully detailed planogram. ▪ Scan pegboard hooks. ▪ UPC labels with product ID. RBD3 HSD3 IHD5 PLAN AND SELL IVY Classic's TOTALLY flexible display system uses 4-color informational headers and metal-plate scan pegboard hooks (page 119) to create your optimum selling space. We have digital photos to scale of all our displays to help you plan your space. Call for a planogram kit to help Layout Example lay out your tool wall. 4 Display and Planogram Programs Create your own OUR PLANOGRAM PROGRAM OR CUSTOMIZE custom planogram. Is the most convenient way to order our displays. Simply give us the dimensions of your wall and we Four foot sections of pre-planned power tool accessories and will create a planogram to suit your needs. hand tools can be combined, mixed and matched to create 24 feet or more of our best-selling merchandise with one simple order. Power Tool Accessory Planogrammed Walls Example wall of IVY's 23 most popular Power Tool Accessory Displays. 6-1/2 Ft. Hand Tool Planogrammed Walls Example of IVY's 20 most popular Hand Tool Displays. Ft. 1/2 - 6-1/2 Ft. 6 5 Table of Contents - Power Tool Accessories Page Page Bi-Metal 8 - 9 Hi- 36 - 37 Reciprocating Molybdenum Blades Drills Jig and 10 - 11 Cobalt 38 - 39 Hacksaw Drills Blades Bi-Metal 12 - 15 Wire 40 - 41 Hole Saws Gauge and Arbors Drills Carbide 16 - 19 Long 42 Circular High-Speed Saw Blades Steel Drills Diamond 20 - 23 Step 43 Blades Drills Metal 24 - 26 Wood 44 - 48 and Masonry Cutting Blades Bits Abrasives 27 - 29 Masonry 49 - 52 and Wire and Brushes/Wheels SDS Bits Carbide Grit 30 - 31 Carbide 53 - 56 Edge Blades Router and Hole Saws Bits High- 32 - 35 Insert Bits, 57 - 71 Speed Bit Holders Steel Drills & Nut Setters Taps, 33 - 37 Mega- 62 - 63 Extractors, Magnetic® Countersinks Bit Holders 6 Cobalt Edge Bi-Metal Blades Made in U.S.A. Bi-Metal Reciprocating Saw Blades - Pouched ▪ Cobalt Bi-Metal blades with 8% cobalt matrix III alloy-steel cutting edge. ▪ Teeth with Rockwell Hardness of 65-67 HRC. ▪ Cutting edge electron welded to a flexible, alloy-steel back. Pouched - 5 blades per vinyl pouch Prod. Item Lgth TPI Thick Width Cuts Box/Case Qty. 28302 R414P 4" 14 .035" 3/4" Metal 1/8" and above 1 / 10 1 28304 R418P 4" 18 .035" 3/4" Metal 1/16" - 1/4" 1 / 10 1 28306 R424P 4" 24 .035" 3/4" Metal 1/16" and under 1 / 10 1 28308 R606P 6" 6 .035" 3/4" Wood 1 / 10 1 28310 R610P 6" 10 .035" 3/4" Non-ferrous & compositions 1 / 10 1 28312 R614P 6" 14 .035" 3/4" Metal 1/8" and above 1 / 10 1 RBD1 - Pouched Bi-Metal 28314 R618P 6" 18 .035" 3/4" Metal 1/16" - 1/4" 1 / 10 1 Reciprocating Saw Blade Display 28316 R624P 6" 24 .035" 3/4" Metal 1/16" and under 1 / 10 1 28318 R636P 6" 6 .035" 3/4" Plaster 1 / 10 1 28320 R656P 6" 6 .050" 3/4" Wood / Nail Cutting 1 / 10 1 28321 R676P 6" 6 .050" 7/16" Wood with Curves 1 / 10 1 28322 R810P 8" 10/14 .050" 3/4" Metal above 1/8", Cast Iron 1 / 10 1 28324 R818P 8" 18 .035" 3/4" Metal 1/16" - 1/4" 1 / 10 1 28328 R956P 9" 6 .050" 3/4" Wood / Nail Cutting 1 / 10 1 28330 R110P 12" 10/14 .050" 3/4" Metal 1/8" and above 1 / 10 1 28331 R118P 12" 18 .035" 3/4" Metal 1/16" - 1/4" 1 / 10 1 28332 R156P 12" 6 .050" 3/4" Wood / Nail Cutting 1 / 10 1 Demolition Blades Pouched - 2 blades per vinyl pouch Size: 25"W, 19"H 28334 R966P 9" 6 .062" 7/8" Demolition - Nailed Wood 1 / 10 1 Note: Also contains one pouch #26508 - 28336 R960P 9" 10 .062" 7/8" Demolition - Metal & Wood 1 / 10 1 8" Grit Reciprocating Blade (p.30). Bi-Metal Reciprocating Saw Blades - Bulk Made in U.S.A. Bulk - 50 blades per box Product Item Lgth TPI Thickness Box/Case 28350 R414B 4" 14 .035" 50 / 250 Product Item Lgth TPI Thickness Box/Case 28352 R418B 4" 18 .035" 50 / 250 28370 R676B 6" 6 .050" 50 / 250 28354 R424B 4" 24 .035" 50 / 250 28372 R810B 8" 10/14 .050" 50 / 250 28356 R606B 6" 6 .035" 50 / 250 28374 R818B 8 18 .035" 50 / 250 28358 R610B 6" 10 .035" 50 / 250 28376 R956B 9" 6 .050" 50 / 250 28360 R614B 6" 14 .035" 50 / 250 28378 R110B 12" 10/14 .050" 50 / 250 28362 R618B 6" 18 .035" 50 / 250 28379 R118B 12" 18 .035 50 / 250 28364 R624B 6" 24 .035" 50 / 250 28380 R156B 12" 6 .050 50 / 250 28366 R636B 6" 6 .035" 50 / 250 28386 R966B 9" 6 .062" 20 / 200 28368 R656B 6" 6 .050" 50 / 250 28388 R960B 9" 10 .062" 20 / 200 8 Cobalt Edge Bi-Metal Blades Bi-Metal Reciprocating Saw Blades - Carded Made in U.S.A. Carded - 1 blade per card Prod. Item Lgth TPI Thick Width Cuts Box/Case Qty. 28602 R414C 4" 14 .035" 3/4" Metal 1/8" and above 5 / 50 5 28604 R418C 4" 18 .035" 3/4" Metal 1/16" - 1/4" 5 / 50 5 28606 R424C 4" 24 .035" 3/4" Metal 1/16" and under 5 / 50 5 28608 R606C 6" 6 .035" 3/4" Wood 5 / 50 5 RBD2 - Carded Bi-Metal 28610 R610C 6" 10 .035" 3/4" Non-ferrous & compositions 5 / 50 5 Reciprocating Saw Blade Display 28612 R614C 6" 14 .035" 3/4" Metal 1/8" and above 5 / 50 5 28614 R618C 6" 18 .035" 3/4" Metal 1/16" - 1/4" 5 / 50 5 28616 R624C 6" 24 .035" 3/4" Metal 1/16" and under 5 / 50 5 28618 R636C 6" 6 .035" 3/4" Plaster 5 / 50 5 28620 R656C 6" 6 .050" 3/4" Wood / Nail Cutting 5 / 50 5 28621 R676C 6" 6 .050" 7/16" Wood with Curves 5 / 50 5 28622 R810C 8" 10/14 .050" 3/4" Metal above 1/8", Cast Iron 5 / 50 5 28624 R818C 8" 18 .035" 3/4" Metal 1/16" - 1/4" 5 / 50 5 28628 R956C 9" 6 .050" 3/4" Wood / Nail Cutting 5 / 50 5 28630 R110C 12" 10/14 .050" 3/4" Metal 1/8" and above 5 / 50 5 28631 R118C 12" 18 .035" 3/4" Metal 1/16" - 1/4" 5 / 50 5 28632 R156C 12" 6 .050" 3/4" Wood / Nail Cutting 5 / 50 5 Size: 25"W, 19"H 28634 R966C 9" 6 .062" 7/8" Demolition - Nailed Wood 5 / 50 5 Note: Also contains five cards #26509 - 8" Grit 28636 R960C 9" 10 .062" 7/8" Demolition - Metal & Wood 5 / 50 5 Reciprocating Blade (p.
Load more

Recommended publications
  • Diamond Blades
    905-814-6859 - 1-866-517-3289 - www.marcur.com DIAMOND BLADES ECONO QUALITY • A value quality, entry level grade blade for the extremely cost conscious user • Provides good cutting performance at low initial cost • Ideal for first time and occasional users PREMIUM QUALITY • A premium quality, contractor grade blade for use on medium to large jobs • Provides excellent cutting performance at a reasonable initial cost • Ideal for general contractors, construction sites and rental yards SUPER PREMIUM QUALITY • A super premium, professional grade blade for professional contractors demanding the ultimate in diamond blade performance • JET-KUT™ Super Premium blades are specially formulated for fastest cutting, longest blade life and optimal cutting cost ratio DIAMOND BLADE PERFORMANCE TIPS DRY CUTTING BLADES • Dry cutting diamond blades do not require water during cutting operations • Specially designed to dissipate heat using air flow around the blade • To ensure longest blade life, a dry blade should be operated using an intermitent cutting action • After every 10-15 seconds of cutting, take the pressure off the blade and run it up to full speed for a few seconds • This cool down period allows adequate air to flow around the blade, eliminating excessive heat build-up and greatly extending the life of the blade • Dry blades must only be used for shallow cuts of 1" - 2" per pass maximum • If the required cutting depth is greater than this, make several shallow passes (step cutting) to achieve the desired depth. Failure to do so will severely decrease wheel life • All JET-KUT™ dry cutting diamond blades can be used wet for added cooling WET CUTTING BLADES • Wet cutting diamond blades must be used wet at all times to prevent excessive heat build-up during operation • A continuous water flow is essential as excessive heat will cause blade damage, loss of wheel life and could cause a safety hazard.
    [Show full text]
  • It Can Be 10.000 Without Re-Sharpening!
    100 Surgeries with one Meyco diamond knife? 1.000 Surgeries with one Meyco diamond knife? You will not believe it – it can be 10.000 without re-sharpening! lt is the statement of Dr. A. Hennig, who built up the Lahan Eye Hospital in Nepal. They cannot afford expensive disposables – they work with valuable Meyco diamond knives. You determine the life of your diamond knife. lt never ever gets dull from cutting the cornea or sclera – just avoid any contact with other instru- ments. Do you know of any cheaper knife? Meyco diamond knives with the high precision, fully titanium handle, are a true investment for long-term use. Meyco Diamond Knives since 1975 Offering decades of use Free hand diamond knives with straight handle for cataract surgery 4-5 Phaco knives with angled handle for “clear cornea” technique 6-7 Navigator (3D knives) 8 MICS the adequate diamond knives for micro incision coaxial surgery 9 Crescent and tunnel knives for scleral tunnel incision 10 Multi purpose diamond knife 11 The limbal relaxing incision knives 12-13 Diamond knife for deep sclerectomy 14 Retina and Arumi diamond knives 15 Step diamond knives 16-17 Diamond knives with micrometer for refractive surgery 18 Diamond knives for Kera Rings and Intacts implantation 19 Multifunctional diamond knife 20-21 Setting the micrometer dial and handling instructions for the micrometer knives 22 ISO-Certificates 23 Swiss Quality production 24-25 Description of use of Meyco diamond knives 26-27 Cover Story: Are they the clear choice for clear corneal cataract surgery? 28-30 Meyco customer service 31 Free hand diamond knives with straight handle for 45° & 30° & 20° Single edge cataract surgery B L D A S order n° 1.50 3.50 0.20 45° 1.50 ME-100 1.50 3.50 0.20 30° 2.60 ME-102 1.00 3.50 0.20 45° 1.00 ME-105 1.00 3.50 0.20 30° 1.70 ME-106 1.00 3.50 0.20 20° 1.00 ME-107 0.80 3.50 0.20 45° 0.80 ME-109 ME-605 Single lancet B L D A S order n° 1.50 3.50 0.20 40° 2.00 ME-110 1.00 3.50 0.20 40° 1.30 ME-111 Lancet diamonds are the ideal 0.80 3.50 0.20 40° 1.00 ME-113 blades for side port incisions.
    [Show full text]
  • Edmar Diamond Blade Training Manual 2 What Is a Diamond Blade?
    DIAMOND BLADE BASICS Edmar Diamond Blade Training Manual 2 What is a Diamond Blade? Continuous Turbo Segmented Edmar Diamond Blade Training Manual 3 What is a Diamond Blade? The blade core is a precision-made steel disc which may or may not have slots. Blade cores are tensioned so that the blade will run straight at the proper cutting speed. Proper tension also allows the blade to remain flexible enough to bend slightly under cutting pressure and then go back to it’s original position. Diamond segments or rims are made up of a mixture of diamonds and metal powders. The diamonds used in bits and blades are man-made (synthetic) and are carefully selected for their shape, quality, friability, and size. These carefully selected diamonds are then mixed with a powder consisting of metals such as cobalt, iron, tungsten, carbide, copper, bronze, and other materials. This mixture is then molded into shape and then heated at temperatures from 1700˚ to 2300˚ under pressure to form a solid metal part called the “bond” or “matrix.” The segment or rim is slightly wider than the blade core. This side clearance allows the cutting edge to penetrate the material being cut without the steel dragging against the sides of the cut. After the blade is assembled it is “opened,” “broken in,” or, “dressed” by grinding the edge concentric to the center. This exposes the diamonds that will be doing the work and establishes the cutting direction as noted by the direction of the arrow stamped into the blade. Edmar Diamond Blade Training Manual 4 Edmar Diamond Blade
    [Show full text]
  • Diamond Blade Overview
    DIAMOND BLADE OVERVIEW Variables in Cutting The segment is the part of the blade that actually does the cutting. A measured quantity of manufactured diamonds are mixed to- gether with a specific combination of powdered metals (the matrix) and processed in graphite molds at a high temperature and high pressure to form individual segments. • Diamond blades do not really cut, instead they grind through material. • The diamond crystals remove material by scratching out particles of hard, dense materials, or by knocking out larger particles of loosely bonded abrasive material. CONTINUOUS SMOOTH RIM • Provides clean, smooth cuts on: Glazed ceramic tile, marble, granite, porcelain and quarry tile • Wet and dry specs available • Sizes: 4" – 14" diameters SERRATED / TURBO RIM • Provides fast cutting with minimal chipping on: Roof tile, unglazed tile, masonry, brick, block, paver, stone and concrete • Dry specs (can be used with water) • Sizes: 4" – 16" diameters SEGMENTED RIM • Provides maximum life and cutting strength: Concrete, reinforced concrete, asphalt, masonry, brick, block, paver and stone • Wet and dry specs available • Sizes: 4" – 60" diameters 1 www.mkdiamond.com Training Manual WET & DRY CUTTING TYPES OF CUTTING • There are two basic types of cutting – dry or wet. • The best choice of blade depends upon: - the requirements of the job - the machine/tool utilizing the diamond blade - the preference of the operator DRY CUTTING DIAMOND BLADES Because of the overwhelming popularity of handheld saws, and the flexible nature of MK diamond blades to professionally handle most ceramic, masonry, stone and concrete materials, the dry cutting blade is very attractive. Dry cutting blades are also used where water is not permitted or not convenient or where so little cutting is required that set-up of water cooled equipment would be inefficient.
    [Show full text]
  • Live the Trade
    The OX Book 2019 Live the Trade Edition 1 Manager Your Account Your Manager Your Customer Care Your Our story OX Tools is a world leading supplier of hand tools, diamond tools and safety products. Developed and proven in Australia over the past 44 years, our tools are recognized as tough, dynamic and different across the globe. As a leading supplier of professional tools we sell direct to the merchants, providing them with excellent service, innovative merchandising solutions and a very powerful brand. FOLLOW US… OXTools USA OXTools USA OXTools USA Issue date: 2018 Subject to availability and OX Tools USA terms and conditions of sale. Page 2 www.oxtools.com Contents Diamond Tools Layout & Measuring Tools Plastering / EIFS/ Drywall Tools pages 10–35 pages 36–43 pages 44–50 General Hand Tools Striking & Demolition Tools Safety & Storage pages 51–53 pages 54–61 pages 62–69 Site Tools Concreting Tools Bricklaying Tools pages 70–73 pages 74–83 pages 84–89 Tiling Tools Merchandising Diamond Tool Product Training & pages 90–99 pages 100–105 Trouble Shooting Guide pages 106–118 The OX Book 2019 Edition 1 Page 3 18 offices, 15 countries, one OX UK - OX Australia - OX USA - Europe/Middle East Australasia/Asia Pacific North America - France - New Zealand – Chicago - Spain - Baltimore - Sweden – Canada - The Netherlands - Malta - Italy - Finland - Saudi Arabia - Argentina - United Arab Emirates Page 4 www.oxtools.com World leading technology… Look at the detail of the products – the strength and thickness of the steel, the perfect weight & balance, the positioning of the handles – guaranteed better than the rest! Packed with innovation, OX tools raise the benchmark for tool performance to unprecedented new levels.
    [Show full text]
  • Version 3 Our Vision Our Vision Is to Bring the Strength of the OX to Every Tradesperson
    www.oxtools.ca version 3 Our vision Our vision is to bring the strength of the OX to every tradesperson. Our tools will be instinctively recognised as tough, dynamic and dependable. Our customers feel like OX is the ‘extra person on site’. Our story Our hand tool range was born in 1974 in Australia. With extremely high quality products, a strong brand and competitive pricing. Developed and proven in the Australian market over the past 39 years the hand tools are instinctively recognised as tough, dynamic, dependable and importantly, affordable. Our Diamond Tool range was developed in 1992 and is now clearly recognised as the leading brand of choice and at the forefront of diamond tool technology. To those of you that are already familiar and trading with Forge Products we’d like to say, ‘Thank you for your support’, and to anyone who is yet to experience the OX success story we say, ‘Welcome, Forge Products looks forward to hearing from you’. Page 2 www.oxtools.ca Contents Diamond Tools Layout & Measuring Tools Bricklaying Tools pages 8-35 pages 36-41 pages 42-49 Concreting & Plastering Tools Striking Tools Cutting Tools pages 50-53 pages 54-56 page 57 Demolition Tools Tool Storage Merchandising Stands pages 58-63 page 63 pages 64-65 Page 3 World leading technology… Only the finest quality of State of the art laser Blade cores are made of the diamond is used in the technology for ultimate highest quality steel, precision production of OX products performance and safety engineered, ground and hardened What is ‘auto’ technology? The diamonds are placed in a regular pattern using advanced auto-array technology.
    [Show full text]
  • Echidna Diamond Rocksaws Concrete - Rock - Wood - Asphalt
    D2HS Cutting with Echidna Diamond Rocksaws concrete - rock - wood - asphalt 5 High-speed up to 3000rpm Diamond Blades 5 also cuts reinforced 400 - 1000mm concrete and asphalt 5 blades as small as 300mm diameter and as large as 1000mm Excavators 5 safer and better 1 - 5 tonne performance than dedicated road cutters 5 multiple blades for cutting trenches D2HS/33 D2HS/40, D2HS/50 Echidna a.s. 12 Railway Parade Thornleigh NSW 2120 Australia email: [email protected] website: www.echidna-rocksaws.com +61 2 9980 7779 Cutting with Echidna Diamond Rocksaws D2HS /25 The table lists recommended starting values Model >> D2HS/25 only that apply to some “average” conditions Excavator Max tonnes 8 1Simultaneous application of max flow and pressure (even continuous values) is not Range Recommended 1 - 2 permissible, as maximum power must be observed as a limiting factor Blade diameter mm 400 - 600 2 Intermittent value can be applied for a Power cont1 kW 30 maximum duration of 10% in every minute 3Continous value can be applied for unlimited Pressure max. int2 MPa 30 period of time, while observing maximum power 3 limit max. cont 21 4Bare machine is machine without blade, shield and head bracket min. required 15 Flow max. cont3 l/min 105 Torque max. cont1 Nm 135 Mass bare machine4 kg 57 Cutting depth loss mm 75 minimum trench width mm 290 rapid automatic brake yes reversible blade rotation yes case drain required yes Blade dia/ sandstone/ concrete basalt/granite bitumen/asphalt wood mm limestone min max min max min max min max min max D2HS/25
    [Show full text]
  • Installation Tools
    INSTALLATION TOOLS a quality brand of QEP Co., Inc. was founded in 1979 in the New York family garage of Lewis and Susan Gould. The very first QEP branded tiling product was a “Do-It-Yourself” Bathtub Edging Kit. There was nothing like it on the market. As the popularity of tile floors began to rise in the United States, so did the demand for DIY installation tools and accessories. This demand quickly opened the doors of opportunity for the QEP brand throughout the national tile tool market. The QEP brand continued to grow and evolve, eventually expanding into the professional market. In 1984, QEP released the world’s first “dual rail” tile cutter, and in 1989 began manufacturing their own professional tile spacers. In the late 90’s, QEP Co., Inc. continued to expand its reach and began selling the QEP brand into Canada, Mexico and South America. Over the next decade, the QEP brand made its way into Australia, New Zealand, England, France and China. Today, QEP has become an recognized professional brand, specializing in installation tools and accessories for tile, porcelain and natural stone. QEP products can be found in all 50 States and in countries throughout the world. QEP continually introduces new and innovative products that address the challenges of today’s market. To establish a stronger presence in the professional tiling industry, QEP has just unveiled their most innovative line of tools yet - The Xtreme Series. Advanced designs have enhanced the professional-grade features of this new tool line that has been Engineered by the Pro, For the Pro.
    [Show full text]
  • Choose the Right Diamond Blade Product Datasheet
    PRODUCT DATASHEET CHOOSE THE RIGHT DIAMOND BLADE MAXIMUM BLADE CUTTING DEPTHS DIAMOND BLADE OPERATING SPEEDS Diameter (inches) Cutting depth Recommended Diameter (inches) Operating Speed Maximum Safe Concrete Saw Blades (RPM)* Speed (RPM)** 14” 4 5/8” 14” 2,592 4,365 16” 5 5/8” 16” 2,268 3,820 18” 6 5/8” 18” 2,016 3,395 20” 7 5/8” 20” 1,814 3,055 24” 9 5/8” 22” 1,649 2,780 26” 10 5/8” 24” 1,512 2,550 30” 11 3/4” 26” 1,396 2,350 36” 14 3/4” 28” 1,296 2,185 42” 17 1/2” 30” 1,120 2,040 48” 19 3/4” 32” 1,134 1,910 Wall & Hand Saw Blades 36” 1,008 1,700 14” 4 5/8” 42” 864 1,455 18” 6 1/2” 48” 756 1,275 24” 9 1/2” Bladeshaft speeds (rpms at no load) for most tools will be higher 30” 11 1/2” than the recommended operating speeds shown above. Under 36” 14 1/2” normal sawing conditions, the actual bladeshaft speed of the tool will slow down under load, and should fall within the optimum 42” 17 1/2” speed range. 48” 20 3/4” * Based on 9,500 sfpm (surface feet per minute) — the general Note: Diamond blade cutting depths listed above are optimum performance range for cutting concrete and masonry approximate. Actual cutting depth will vary with the exact products is + 10%. For hard, dense materials such as stone and blade diameter or saw type (or brand), or the exact diameter of the blade collars (flanges).
    [Show full text]
  • Diamond Blade RPM
    TOOLBOX SAFETY TIPS TST #203 Diamond Blade RPM Diamond blades are designed to operate within a specific range of revolutions per minute (RPM). Operating these blades outside the effective RPM range will likely result in significant blade damage and can potentially cause severe injury or death to an operator or bystander if the blade shatters. The formula for calculating the surface feet per minute (SFM) at which a segment on the periphery of a blade is travelling is: SFM = diameter of the blade (in feet) x RPM x 3.14. Conversely, the RPM for a known SFM is determined as follows: RPM = SFM / (diameter of the blade (in feet) x 3.14). The following table lists common blade sizes, their recommended RPM range and resulting SFM in harder aggregates with heavier steel reinforcement (above 2%) and also for softer aggregate concrete with lighter reinforcement (below 2%). RPM Target to Achieve 11,000 – RPM Target to Achieve 8,500 – Blade Diameter in Feet 14,000 SFM 1. for Medium to Soft 11,000 SFM 1. for Hard Aggregate (inches) Aggregate Concrete in Medium to Concrete in Medium to Heavy Steel Light Steel 1.5 (18") 1,800 – 2,330 2,330 – 2,970 2.0 (24”) 1,350 – 1,750 1,750 – 2,230 2.17 (26") 1,250 – 1,615 1,615 – 2,050 2.5 (30") 1,080 – 1,400 1,400 – 1,780 3.0 (36") 900 – 1,170 1,170 – 1,500 3.5 (42") 775 – 1,000 1,000 – 1,275 4.0 (48") 680 - 875 875 – 1,100 4.5 (54") 600 - 780 780 - 990 5.0 (60") 540 - 700 700 - 890 Recommended RPMs for Common Blade Sizes 1 The ANSI standard states that the maximum safe operating SFM for any blade is less than 16,000 SFM.
    [Show full text]
  • Characterization and Analysis of the Superabrasive Diamond Blade Sawing Process
    Louisiana State University LSU Digital Commons LSU Historical Dissertations and Theses Graduate School 1998 Characterization and Analysis of the Superabrasive Diamond Blade Sawing Process. Harlan Dwayne Jerro Louisiana State University and Agricultural & Mechanical College Follow this and additional works at: https://digitalcommons.lsu.edu/gradschool_disstheses Recommended Citation Jerro, Harlan Dwayne, "Characterization and Analysis of the Superabrasive Diamond Blade Sawing Process." (1998). LSU Historical Dissertations and Theses. 6839. https://digitalcommons.lsu.edu/gradschool_disstheses/6839 This Dissertation is brought to you for free and open access by the Graduate School at LSU Digital Commons. It has been accepted for inclusion in LSU Historical Dissertations and Theses by an authorized administrator of LSU Digital Commons. For more information, please contact [email protected]. INFORMATION TO USERS This manuscript has been reproduced from the microfrhn master. UMI fihns the text directly from the original or copy submitted. Thus, some thesis and dissertation copies are in typewriter 6ce, while others may be from any type of computer printer. The quality of this reproduction is dependent upon the quality of the copy submitted. Broken or indistinct print, colored or poor quality illustrations and photographs, print bleedthrough, substandard margins, and improper alignment can adversely affect reproduction. In the unlikely event that the author did not send UMI a complete manuscript and there are missing pages, these will be noted. Also, if unauthorized copyright material had to be removed, a note will indicate the deletion. Oversize materials (e.g., maps, drawings, charts) are reproduced by sectioning the original, beginning at the upper left-hand comer and continuing from left to right in equal sections with small overlaps.
    [Show full text]
  • Diamond Blades & Cup Grinders
    DIAMOND PRODUCTS DISTRIBUTOR BASICS BOOKLET Rev. January 2020 800-321-5336 diamondproducts.com TM HIGH SPEED DIAMOND BLADES 800-321-5336 GOOD BETTER BEST Delux-Cut Star Blue Imperial Purple • Basic quality diamond and economical cutting value • Good quality diamond and good cutting value • Better quality diamond and very good Specifications: Specifications: cutting life H8D - General purpose H8B - General purpose Specifications: H10D - Asphalt, green concrete, brick and block H10B - Asphalt, green concrete, brick and block H8I - General purpose (includes drop set wear protection) H10I - Asphalt, green concrete, brick and block H8D H8B H8I SIZE CAT # UPC # SIZE CAT # UPC # SIZE CAT # UPC # 10” x .110 x 1” 22856 603461228565 14” x .125 x UNV 85261 603461852616 14” x .125 x UNV 78976 603461789769 12” x .110 x 1” 70495 603461704953 16” x .125 x 1” 21424 603461214247 16” x .125 x 1” 96480 603461964807 14” x .125 x 1” 70499 603461704991 18” x .125 x 1” 63599 603461635998 18” x .125 x 1” 34504 603461345040 16” x .125 x 1” 20926 603461209267 H10D H10B H10I 14” x .125 x 1” 50537 603461505376 14” x .125 x 1” 14355 603461143554 14” x .125 x UNV 15379 603461153799 Great for Metal H8CA H8ICA PRO Heavy Duty Orange MAXX • Very high quality diamond and longer cutting life Cut-ALL Multi-Purpose Blades A2Z Vacuum Bonded Blades • Diamond depth of .295” (7mm) • High speed blade with split segment design cuts cured • Vacuum bonded technology-diamonds are • Segment height of .395” (10mm) and green concrete, brick and block, ductile iron and adhered to the core landing • Heat isolation slots in segment for better asphalt.
    [Show full text]