SHURTAPE.COM | 1.888.442.TAPE i
THE ONLY JOB WORTH DOING IS A JOB WELL DONE
2016-2017 PRODUCT CATALOG
* SEE PAGE 50 FOR APPLICABLE STANDARDS ii SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE iii
Headquartered in Hickory, NC, Shurtape Technologies, LLC, is a privately owned, fifth generation, global corporation that designs, develops, manufactures and distributes pressure-sensitive tapes that make our customers’ lives easier and help them do their jobs better.
We’re an established company in continuous operation since 1880. We have a history of entrepreneurship and innovation, from spinning cotton, yarn and twine to making high-quality, high-performing tapes today.
Shurtape brand was introduced in 1955 when we began manufacturing tapes, with a focus on solutions for those with the highest, most exacting standards. Today, we proudly serve a variety of markets, from painting, packaging and arts & entertainment to HVAC, transportation and building & construction. PROUDLY No matter the job, it’s critical you’re prepared. Shurtape has you covered with the tapes you trust – and the product features you demand – to deliver superior results. APPLIED SINCE 1955
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS iv SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 1 CONTENTS
MASKING & PAPER TAPES 2 Painter’s Grade Masking - Specialty 4 Dispenser 4 Painter’s Grade Masking - Production 5 General Purpose Masking 6 Specialty Masking 6 High Performance Masking 7 THE STICKY TRUTH Colored Crepe Paper 8 Not all packaging operations are created equal. The Sticky Truth Colored Flatback Paper 8 serves as your guide to help identify potential case sealing Flatback Paper 9 issues, while providing you with the knowledge and resources to PACKAGING SOLUTIONS 10 make better, more informed decisions to enhance your packaging Hot Melt Carton Sealing 12 Hot Melt Specialty Carton Sealing 13 operations. Get to know The Sticky Truth about packaging at Hot Melt Printed Carton Sealing 14 ShurSEALSecure.com. Hot Melt Directly Printable Carton Sealing 14 Emulsion Acrylic Carton Sealing 15 TAPE UNIVERSITY Solvent-Based Acrylic Carton Sealing 16 Tape U Clear to the Core Packaging 16 Tape University is a leading online learning resource for all things tape. We’re committed to building the best learning experience by Office & Specialty Packaging 17 Label Protection 17 providing the tape industry’s most comprehensive place to learn Tensilized Strapping 18 Mission Pack about the past, present and future trends. See what’s new – or ask Filament Strapping 19 your own tape-related questions – at TapeUniversity.com. Water Activated Paper 20 Manual Tape Application – Hand-Held 22 Mission HVAC MISSION: HVAC Manual Tape Application – Tabletop 23 The trades face a worrisome future as Baby Boomers age out of Automated Tape Application 23 OUR MISSION ShurSEAL® Packaging Solutions 24 the industry with few replacements to count on. That’s why we’re CLOTH & DUCT TAPES 26 on a mission to educate for success. Through our Mission: HVAC BE TRUE TO YOUR WORKShurSEAL Secure Co-Extruded Duct 28 program, we’re following three students who are pursuing careers ShurGRIP® Co-Extruded Duct 29 in the HVAC field to show the world just how rewarding – and fun – Colored & Printed Duct 30 Sticky Truth technical education can be. Follow the journey at Performance Duct 31 TapeUniversity.com/MissionHVAC Heavy Duty Duct 32 Super Performance Duct 32 Specialty Performance Duct 33 MISSION: PACKAGING Coated Cloth 34 Building upon the success of our Mission: HVAC program, our Stucco Masking 36 Mission: Packaging program is designed to enhance students’ FOIL & FILM TAPES 38 educational experiences within the packaging field. Each month, UL 181B-FX Listed 40 three students are given packaging-themed challenges that test Roll Mastic 40 Cold Temperature Foils 41 their classroom learnings and real-life skills. And, like their HVAC UL 181A-P/B-FX Listed 41 counterparts, are rewarded for their hard work and completion Aluminum & Paper Composite 42 of all 10 missions with $5,000 to put toward the cost of their Specialty Tapes 42 education. Learn more at TapeUniversity.com/MissionPackaging. PVC Film 43 DOUBLE-COATED TAPES 44 Double-Coated Paper 46 Double-Coated Film 47 Double-Coated Cloth 47 Transfer Adhesive 48 Dispenser 48 PRODUCT INNOVATIONS 49 APPLICABLE STANDARDS 50 LOCATIONS 50 PRODUCT INDEX 51 WARRANTY 51 MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 2 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 3
MASKING & PAPER TAPES
WE KNOW YOUR TIME IS VALUABLE. THAT’S WHY OUR MASKING AND PAPER TAPES ARE ENGINEERED TO
MEET THE DEMANDS OF A RANGE OF JOBS. WHETHER YOU
REQUIRE TENSILE STRENGTH, TEMPERATURE RESISTANCE,
REMOVABILITY, FLEXIBILITY OR SHARP PAINT LINES, SHURTAPE DELIVERS.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 4 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 5
PAINTER’S GRADE MASKING - SPECIALTY PAINTER’S GRADE MASKING - PRODUCTION
FROGTAPE® CP 150 CP 60® COLONIAL® CP 66®
PROFESSIONAL GRADE PAINTER’S MATE GREEN® PREMIUM GRADE, RAZOREDGE® PREMIUM GRADE CONTRACTOR GRADE MEDIUM ADHESION MEDIUM ADHESION LOW ADHESION HIGH ADHESION HIGH ADHESION RUBBER-BASED ADHESIVE RUBBER-BASED ADHESIVE ACRYLIC-BASED ADHESIVE RUBBER-BASED ADHESIVE RUBBER-BASED ADHESIVE EXCLUSIVE PAINTBLOCK® TECHNOLOGY
TENSILE (LBS/IN WIDTH) 22 TENSILE (LBS/IN WIDTH) 14 TENSILE (LBS/IN WIDTH) 23 TENSILE (LBS/IN WIDTH) 24 TENSILE (LBS/IN WIDTH) 23 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 30 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 29 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 14 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 39 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 38 THICKNESS (MILS) 5.7 THICKNESS (MILS) 5.4 THICKNESS (MILS) 3.6 THICKNESS (MILS) 6.4 THICKNESS (MILS) 5.6 ELONGATION (%) 10 ELONGATION (%) 12 ELONGATION (%) 4.5 ELONGATION (%) 9 ELONGATION (%) 8 MAXIMUM SERVICE TEMPERATURE (°F) - MAXIMUM SERVICE TEMPERATURE (°F) 150 MAXIMUM SERVICE TEMPERATURE (°F) - MAXIMUM SERVICE TEMPERATURE (°F) 200 MAXIMUM SERVICE TEMPERATURE (°F) 150 APPLICABLE STANDARDS* 12 APPLICABLE STANDARDS* 12 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* 12 APPLICABLE STANDARDS* 12
For interior or exterior use on multiple surfaces, including For interior use on painted walls, woodwork, glass, metal For painting stripes, diamonds and other patterns on For industrial and automotive paint applications that do For residential and commercial painting and cured painted walls, wood trim, glass and metal; and vinyl. walls; For interior use on delicate surfaces such as not require the use of a bake oven; Can also be used for construction, industrial masking, holding and packaging; Withstands direct sunlight for up to 7 days. painted drywall and faux finishes. general purpose masking applications that demand a Use in applications that demand quick stick and premium performance tape. conformability to irregularly shaped surfaces.
rRELEAS u E ® Sh 21 8 60
CP 27® DISPENSER CP 102 CP 107 EM 101
PREMIUM GRADE INDUSTRIAL GRADE INDUSTRIAL GRADE MEDIUM ADHESION MEDIUM-HIGH ADHESION MEDIUM-HIGH ADHESION SYNTHETIC RUBBER-BASED ADHESIVE RUBBER-BASED ADHESIVE SYNTHETIC RUBBER-BASED ADHESIVE
TENSILE (LBS/IN WIDTH) 24 TENSILE (LBS/IN WIDTH) 19 TENSILE (LBS/IN WIDTH) 19 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 32 HAND-HELD PAINT MASKING TOOL ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 32 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 32 THICKNESS (MILS) 5.3 DUAL-SHARPENED BLADE THICKNESS (MILS) 5.4 THICKNESS (MILS) 4.9 ELONGATION (%) 8 HOLDS A VARIETY OF TAPE WIDTHS ELONGATION (%) 9 ELONGATION (%) 9 MAXIMUM SERVICE TEMPERATURE (°F) 200 MAXIMUM SERVICE TEMPERATURE (°F) 200 MAXIMUM SERVICE TEMPERATURE (°F) 150 APPLICABLE STANDARDS* - For surface preparation prior to interior and exterior APPLICABLE STANDARDS* 12 APPLICABLE STANDARDS* 12 paint jobs; Applies painter’s tape and masking film or For interior and exterior use on multiple surfaces, paper simultaneously. For the industrial, commercial and residential paint For non-critical painting and industrial applications that including painted walls, glass, vinyl, metal and wood; markets for use on vinyl, metal, glass, plastic and rubber. demand good adhesion, quick stick and clean removal; Not recommended for use on wallpaper, unpainted RECOMMENDED PRODUCTS Also used for general purpose packaging, bundling, wallboard, ceiling tile or with uncured coatings. CP 27 holding, splicing and tabbing; For use on vinyl, glass, plastic and rubber.
rRELEAS u E ® Sh 14
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 6 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 7
GENERAL PURPOSE MASKING HIGH PERFORMANCE MASKING
CP 83 CP 101 CP 105 CP 905 CF 740 CP 650
UTILITY GRADE GENERAL PURPOSE GRADE GENERAL PURPOSE GRADE HIGH PERFORMANCE GRADE HIGH PERFORMANCE GRADE HIGH PERFORMANCE GRADE HIGH ADHESION MEDIUM-HIGH ADHESION MEDIUM-HIGH ADHESION HIGH-TEMPERATURE HIGH-TEMPERATURE HIGH-TEMPERATURE SYNTHETIC RUBBER-BASED ADHESIVE BLENDED RUBBER-BASED ADHESIVE SYNTHETIC RUBBER-BASED ADHESIVE EXCELLENT ADHESION MEDIUM-HIGH ADHESION MEDIUM-HIGH ADHESION RUBBER-BASED ADHESIVE RUBBER-BASED ADHESIVE RUBBER-BASED ADHESIVE
TENSILE (LBS/IN WIDTH) 20 TENSILE (LBS/IN WIDTH) 18 TENSILE (LBS/IN WIDTH) 18 TENSILE (LBS/IN WIDTH) 24 TENSILE (LBS/IN WIDTH) 25 TENSILE (LBS/IN WIDTH) 28 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 49 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 35 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 30 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 41 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 39 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 37 THICKNESS (MILS) 5.0 THICKNESS (MILS) 4.9 THICKNESS (MILS) 4.6 THICKNESS (MILS) 6.4 THICKNESS (MILS) 6.3 THICKNESS (MILS) 6.6 ELONGATION (%) 8 ELONGATION (%) 9.5 ELONGATION (%) 7 ELONGATION (%) 11 ELONGATION (%) 11 ELONGATION (%) 11 MAXIMUM SERVICE TEMPERATURE (°F) 150 MAXIMUM SERVICE TEMPERATURE (°F) 150 MAXIMUM SERVICE TEMPERATURE (°F) 150 MAXIMUM SERVICE TEMPERATURE (°F) 350 MAXIMUM SERVICE TEMPERATURE (°F) 350 MAXIMUM SERVICE TEMPERATURE (°F) 325 APPLICABLE STANDARDS* 12 APPLICABLE STANDARDS* 12 APPLICABLE STANDARDS* 12 APPLICABLE STANDARDS* 12 APPLICABLE STANDARDS* 12 APPLICABLE STANDARDS* 1, 12
For general purpose packaging, bundling, holding, For bundling, packaging, holding, splicing, masking and For non-critical bundling and labeling applications; Also For high-temperature - up to 350 F - paint masking and For high-temperature, demanding industrial paint For demanding, high-temperature paint masking and splicing, tabbing and banding applications involving a labeling for home, school and industry. used for general purpose packaging, holding and splicing metal fabrication applications in the transportation masking applications in the transportation (auto, metal fabrication applications in the transportation variety of substrates; Not recommended for exacting applications for home, school and industry. (auto, coaches, buses and marine) industry; coaches, buses and marine) and metal fabrication (auto, coaches, buses and marine) industry; Also used industrial masking, spray painting or oven baking Recommended for indoor use only. industries; Also used for EPDM rubber insulation for metal preparation, painting, coating and gel coat applications. protection; Recommended for indoor use only. masking; Recommended for indoor use only.
SPECIALTY MASKING CP 500 CP 450 CP 400
CP 743 PE 100
HIGH PERFORMANCE GRADE HIGH PERFORMANCE GRADE HIGH PERFORMANCE GRADE HIGH-TEMPERATURE MODERATE-TEMPERATURE MODERATE-TEMPERATURE MEDIUM-HIGH ADHESION MEDIUM-HIGH ADHESION MEDIUM-HIGH ADHESION SPECIALTY GRADE FLOORMATE® RUBBER-BASED ADHESIVE RUBBER-BASED ADHESIVE RUBBER-BASED ADHESIVE
PHOTOGRAPHIC BLACK LOW ADHESION TENSILE (LBS/IN WIDTH) 26 TENSILE (LBS/IN WIDTH) 31 TENSILE (LBS/IN WIDTH) 24 VERY HIGH ADHESION ACRYLIC-BASED ADHESIVE ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 43 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 37 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 34 RUBBER-BASED ADHESIVE THICKNESS (MILS) 5.8 THICKNESS (MILS) 6.9 THICKNESS (MILS) 5.7
TENSILE (LBS/IN WIDTH) 24 TENSILE (LBS/IN WIDTH) 11 ELONGATION (%) 9 ELONGATION (%) 10 ELONGATION (%) 10 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 47 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 15 MAXIMUM SERVICE TEMPERATURE (°F) 300 MAXIMUM SERVICE TEMPERATURE (°F) 225 MAXIMUM SERVICE TEMPERATURE (°F) 200 THICKNESS (MILS) 6.5 THICKNESS (MILS) 4.6 APPLICABLE STANDARDS* 12 APPLICABLE STANDARDS* 12 APPLICABLE STANDARDS* 12 ELONGATION (%) 8 ELONGATION (%) 500 For high-temperature paint masking and metal For moderate-temperature, demanding paint masking For moderate-temperature paint masking and metal MAXIMUM SERVICE TEMPERATURE (°F) 150 MAXIMUM SERVICE TEMPERATURE (°F) 160 fabrication applications in the transportation (auto, applications in the transportation (auto, coaches, buses fabrication applications in the transportation (auto, APPLICABLE STANDARDS* 12 APPLICABLE STANDARDS* - coaches, buses and marine) industry; Also used for wet and marine) and metal fabrication industries; Also used coaches, buses and marine) industry; Recommended for For use in photo studios, film processing labs and For temporary use on properly prepared and cured sanding applications; Recommended for indoor use only. for wet sanding applications; Recommended for indoor indoor use only. home darktrooms; Recommended for use as a chart wood floors; Also used as a gym floor marking tape for use only. tape; Used for quality photographic reproduction work, creating temporary lines and boundaries; Can also be including cropping and edging negatives for contact used on other hard flooring surfaces, including sheet printing; Also used for sealing camera bellows and film vinyl, wood laminates, engineered hardwood, tile, marble holders against light leaks. and granite.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 8 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 9
COLORED CREPE PAPER COLORED FLATBACK PAPER FLATBACK PAPER
CP 631 FP 17 FP 227 FP 115
GENERAL PURPOSE GRADE PRINTABLE, LOW TEMPERATURE PRINTABLE HIGH PERFORMANCE GRADE MEDIUM-HIGH ADHESION HIGH ADHESION HIGH ADHESION REINFORCED FLATBACK PAPER SYNTHETIC RUBBER-BASED ADHESIVE RUBBER-BASED ADHESIVE RUBBER-BASED ADHESIVE VERY HIGH ADHESION SYNTHETIC RUBBER-BASED ADHESIVE
TENSILE (LBS/IN WIDTH) 20 TENSILE (LBS/IN WIDTH) 30 TENSILE (LBS/IN WIDTH) 30 TENSILE (LBS/IN WIDTH) 40 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 34 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 52 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 57 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 70 THICKNESS (MILS) 4.9 THICKNESS (MILS) 5.4 THICKNESS (MILS) 5.8 THICKNESS (MILS) 6.5 ELONGATION (%) 9 ELONGATION (%) 3 ELONGATION (%) 2.5 ELONGATION (%) 3 MAXIMUM SERVICE TEMPERATURE (°F) 150 MAXIMUM SERVICE TEMPERATURE (°F) 150 MAXIMUM SERVICE TEMPERATURE (°F) 150 MAXIMUM SERVICE TEMPERATURE (°F) 120 APPLICABLE STANDARDS* 5, 12 APPLICABLE STANDARDS* 13 APPLICABLE STANDARDS* 5, 13 APPLICABLE STANDARDS* 13
For general purpose labeling, color-coding, decorating For general purpose packaging, bundling, holding, For full-web flexographic printing equipment or For industrial splicing, start-up, tabbing, shingling and and identification; Can also be used for packaging, binding, splicing, labeling, color-coding, banding, hand-labeling applications. overlapping applications; Effectively secures the paper bundling, binding, holding, splicing and banding decorating and identification. to the core during roll start-up, holds the splice during applications. processing and anchors the end of the roll securely. **Fluorescent colors do not conform to ASTM D-4236
FP 726 FP 202 FP 96 FP 97
PRINTABLE, HIGH-STRENGTH PACKAGING PREMIUM GRADE PACKAGING GRADE GENERAL PURPOSE GRADE HIGH ADHESION HEAVY DUTY, BLEACHED KRAFT PAPER KRAFT FLATBACK PAPER KRAFT FLATBACK PAPER RUBBER-BASED ADHESIVE VERY HIGH ADHESION VERY HIGH ADHESION VERY HIGH ADHESION RUBBER-BASED ADHESIVE RUBBER-BASED ADHESIVE SYNTHETIC RUBBER-BASED ADHESIVE
TENSILE (LBS/IN WIDTH) 45 TENSILE (LBS/IN WIDTH) 55 TENSILE (LBS/IN WIDTH) 36 TENSILE (LBS/IN WIDTH) 35 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 72 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 63 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 90 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 110 THICKNESS (MILS) 6.6 THICKNESS (MILS) 7.5 THICKNESS (MILS) 6.1 THICKNESS (MILS) 6.0 ELONGATION (%) 3 ELONGATION (%) 3 ELONGATION (%) 6 ELONGATION (%) 6 MAXIMUM SERVICE TEMPERATURE (°F) 150 MAXIMUM SERVICE TEMPERATURE (°F) 180 MAXIMUM SERVICE TEMPERATURE (°F) 150 MAXIMUM SERVICE TEMPERATURE (°F) 150 APPLICABLE STANDARDS* 5, 13 APPLICABLE STANDARDS* 11, 13 APPLICABLE STANDARDS* 13 APPLICABLE STANDARDS* 13, 24, 25, 26, 27
For identification labeling, color-coding, packaging For splicing various substrates; Used for heavy duty For hand and machine carton sealing; Used for splicing For hand and machine carton sealing; Used for splicing closure and other applications where printing is hand and machine carton sealing applications; Used various substrates; Also used for general purpose various substrates; Also used for general purpose necessary. for general purpose applications where a thick, flatback packaging, binding, holding, tabbing, reinforcing, packaging, binding, holding, tabbing, reinforcing, paper tape is required. banding and patching applications. banding, patching and floor seaming applications; FDA compliant.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 10 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 11
PACKAGING SOLUTIONS
WE KNOW EVERY SEALING SITUATION IS UNIQUE. AND WE UNDERSTAND THAT KEEPING YOUR LINES RUNNING AT PEAK PRODUCTION,
WHILE PRODUCING A BETTER, MORE RELIABLE CASE SEAL IS A PRIORITY.
THAT’S WHY WE TOOK A HOLISTIC APPROACH IN THE DEVELOPMENT OF
OUR TAPE AND TAPE APPLICATION TECHNOLOGIES TO DELIVER SOLUTIONS
THAT ARE PURPOSE-BUILT FOR YOUR PACKAGING AND CASE SEALING
OPERATIONS. NO MATTER THE APPLICATION, WE DELIVER SECURE SEALS, EVERY TIME.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 12 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 13
HOT MELT CARTON SEALING HOT MELT SPECIALTY CARTON SEALING
HP 100® HP 200® HP 300® HP 132® HP 232® HP 235
GENERAL PURPOSE GRADE PRODUCTION GRADE PERFORMANCE GRADE COLD ENVIRONMENT COLD ENVIRONMENT RECYCLED CARTONS 25 MICRON CAST BOPP FILM 30 MICRON CAST BOPP FILM 35 MICRON CAST BOPP FILM GENERAL PURPOSE GRADE PRODUCTION GRADE PRODUCTION GRADE SYNTHETIC HOT MELT ADHESIVE SYNTHETIC HOT MELT ADHESIVE SYNTHETIC HOT MELT ADHESIVE 25 MICRON CAST BOPP FILM 30 MICRON CAST BOPP FILM 30 MICRON CAST BOPP FILM SYNTHETIC HOT MELT ADHESIVE SYNTHETIC HOT MELT ADHESIVE SYNTHETIC HOT MELT ADHESIVE
TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 21 TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 27 TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 30 TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 21 TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 27 TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 27 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 43 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 44 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 47 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 30 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 30 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 50 HOLDING POWER TO FIBERBOARD (MINUTES) 10,000 HOLDING POWER TO FIBERBOARD (MINUTES) 15,000 HOLDING POWER TO FIBERBOARD (MINUTES) 20,000 HOLDING POWER TO FIBERBOARD (MINUTES) 10,000 HOLDING POWER TO FIBERBOARD (MINUTES) 10,000 HOLDING POWER TO FIBERBOARD (MINUTES) 15,000 THICKNESS (MILS) 1.6 THICKNESS (MILS) 1.9 THICKNESS (MILS) 2.2 THICKNESS (MILS) 1.6 THICKNESS (MILS) 1.9 THICKNESS (MILS) 2.0 ELONGATION (%) 150 ELONGATION (%) 150 ELONGATION (%) 150 ELONGATION (%) 150 ELONGATION (%) 150 ELONGATION (%) 150 APPLICATION TEMPERATURE RANGE (°F) 35 - 110 APPLICATION TEMPERATURE RANGE (°F) 35 - 110 APPLICATION TEMPERATURE RANGE (°F) 35 - 110 APPLICATION TEMPERATURE RANGE (°F) 20 - 75 APPLICATION TEMPERATURE RANGE (°F) 20 - 75 APPLICATION TEMPERATURE RANGE (°F) 35 - 110 SERVICE TEMPERATURE RANGE (°F) -20 - 150 SERVICE TEMPERATURE RANGE (°F) -20 - 150 SERVICE TEMPERATURE RANGE (°F) -20 - 150 SERVICE TEMPERATURE RANGE (°F) -20 - 100 SERVICE TEMPERATURE RANGE (°F) -20 - 100 SERVICE TEMPERATURE RANGE (°F) -20 - 150 APPLICABLE STANDARDS* 18, 25, 28 APPLICABLE STANDARDS* 4, 18, 25, 28 APPLICABLE STANDARDS* 4, 18, 25, 28 APPLICABLE STANDARDS* 18, 25, 28 APPLICABLE STANDARDS* 18, 25, 28 APPLICABLE STANDARDS* 4, 18, 25, 28
For manual or automated industrial carton sealing of For manual or automated industrial carton sealing of For critical closure manual or automated industrial For manual or automated industrial sealing of lightweight For manual or automated industrial sealing of medium- For manual and automated industrial sealing of medium- lightweight cartons with minimal exposure to handling, medium-weight cartons in normal manufacturing and carton sealing of medium-weight cartons that are cartons in cold temperature environments such as food weight cartons in cold temperature environments weight, highly recycled cartons, particularly 100 percent shipping and load stress. shipping environments. subjected to increased handling stress. processing and packaging facilities, as well as in cold such as food processing and packaging facilities, as recycled. weather moving/storage and unheated warehouses. well as in cold weather moving/storage and unheated **White not compliant with standards 25, 28 warehouses.
HP 400® HP 500® HP 800
HIGH PERFORMANCE GRADE HEAVY DUTY GRADE HEAVY DUTY GRADE 40 MICRON CAST BOPP FILM 50 MICRON CAST BOPP FILM 50 MICRON POLYESTER FILM SYNTHETIC HOT MELT ADHESIVE SYNTHETIC HOT MELT ADHESIVE SYNTHETIC HOT MELT ADHESIVE
TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 33 TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 42 TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 54 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 54 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 58 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 95 HOLDING POWER TO FIBERBOARD (MINUTES) 25,000 HOLDING POWER TO FIBERBOARD (MINUTES) 30,000 HOLDING POWER TO FIBERBOARD (MINUTES) 35,000 THICKNESS (MILS) 2.5 THICKNESS (MILS) 3.0 THICKNESS (MILS) 3.4 ELONGATION (%) 150 ELONGATION (%) 150 ELONGATION (%) 130 APPLICATION TEMPERATURE RANGE (°F) 35 - 110 APPLICATION TEMPERATURE RANGE (°F) 35 - 110 APPLICATION TEMPERATURE RANGE (°F) 35 - 110 SERVICE TEMPERATURE RANGE (°F) -20 - 150 SERVICE TEMPERATURE RANGE (°F) -20 - 150 SERVICE TEMPERATURE RANGE (°F) -20 - 150 APPLICABLE STANDARDS* 4, 9, 18, 25, 28 APPLICABLE STANDARDS* 4, 9, 18, 25, 28 APPLICABLE STANDARDS* 4, 7, 8, 18, 25, 29
For manual or automated industrial carton sealing of For manual or automated industrial carton sealing of For manual or automated industrial carton sealing of large, bulky or heavy content cartons; For use in higher heavy, bulky cartons, including overstuffed or under-filled heavy duty, critical closure cartons, including military speed, critical closure applications; Can be used in cartons, in high stress and extreme handling conditions. supplies, high-value electronic components and moderate to severe handling environments. hazardous materials and chemicals.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 14 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 15
HOT MELT PRINTED HOT MELT DIRECTLY PRINTABLE CARTON SEALING EMULSION ACRYLIC CARTON SEALING CARTON SEALING HP 240 HP 260 HP 460 AP 101® AP 180® AP 201®
PRODUCTION GRADE PRODUCTION GRADE HIGH PERFORMANCE GRADE GENERAL PURPOSE GRADE PRODUCTION GRADE PRODUCTION GRADE STANDARD MESSAGE PRINT 30 MICRON CAST BOPP FILM 40 MICRON CAST BOPP FILM 25 MICRON CAST BOPP FILM 25 MICRON CAST BOPP FILM 28 MICRON CAST BOPP FILM 30 MICRON CAST BOPP FILM SYNTHETIC HOT MELT ADHESIVE SYNTHETIC HOT MELT ADHESIVE EMULSION ACRYLIC ADHESIVE EMULSION ACRYLIC ADHESIVE EMULSION ACRYLIC ADHESIVE SYNTHETIC HOT MELT ADHESIVE
TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 27 TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 27 TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 33 TENSILE (LBS/IN WIDTH) 20 TENSILE (LBS/IN WIDTH) 20 TENSILE (LBS/IN WIDTH) 24 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 44 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 44 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 54 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 18 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 21 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 22 HOLDING POWER TO FIBERBOARD (MINUTES) 15,000 HOLDING POWER TO FIBERBOARD (MINUTES) 15,000 HOLDING POWER TO FIBERBOARD (MINUTES) 25,000 THICKNESS (MILS) 1.6 THICKNESS (MILS) 1.8 THICKNESS (MILS) 2.0 THICKNESS (MILS) 1.9 THICKNESS (MILS) 1.9 THICKNESS (MILS) 2.5 ELONGATION (%) 150 ELONGATION (%) 150 ELONGATION (%) 150 ELONGATION (%) 150 ELONGATION (%) 150 ELONGATION (%) 150 APPLICATION TEMPERATURE RANGE (°F) 20 - 110 APPLICATION TEMPERATURE RANGE (°F) 20 - 110 APPLICATION TEMPERATURE RANGE (°F) 20 - 110 APPLICATION TEMPERATURE RANGE (°F) 35 - 110 APPLICATION TEMPERATURE RANGE (°F) 35 - 110 APPLICATION TEMPERATURE RANGE (°F) 35 - 110 SERVICE TEMPERATURE RANGE (°F) -20 - 180 SERVICE TEMPERATURE RANGE (°F) -20 - 180 SERVICE TEMPERATURE RANGE (°F) -20 - 180 SERVICE TEMPERATURE RANGE (°F) -20 - 150 SERVICE TEMPERATURE RANGE (°F) -20 - 150 SERVICE TEMPERATURE RANGE (°F) -20 - 150 APPLICABLE STANDARDS* 25, 28 APPLICABLE STANDARDS* 25, 28 APPLICABLE STANDARDS* 25, 28 APPLICABLE STANDARDS* 4, 18, 25, 28 APPLICABLE STANDARDS* 4, 18 APPLICABLE STANDARDS* 4, 18 For non-critical closure of lightweight cartons in manual For manual and automated industrial sealing of For manual and automated industrial sealing of light- to Printed with standard messages to prevent pilferage For use on Siat L33, L36, L233 (or equivalent) surface For use on Siat L33, L36, L233 (or equivalent) surface and automated industrial sealing settings. lightweight cartons. medium-weight cartons. or inform handlers of care; For manual or automated printing presses; For manual sealing of medium- printing presses; For manual or automated industrial industrial carton sealing of medium-weight cartons in weight cartons in normal manufacturing and shipping carton sealing of large, bulky or heavy content cartons; **Tan not compliant with standards 25, 28 **Tan not compliant with standards 25, 28 **Tan not compliant with standards 25, 28 normal manufacturing and shipping environments. environments; May also be used in automated industrial For use in higher speed, critical closure applications; For carton sealing applications. use in moderate to severe handling environments.
HP 250 HP 560 GS 496 AP 301® AP 401®
PRODUCTION GRADE HEAVY DUTY GRADE PRODUCTION GRADE PERFORMANCE GRADE HIGH PERFORMANCE GRADE CUSTOM PRINT 50 MICRON CAST BOPP FILM CAST BOPP FILM 35 MICRON CAST BOPP FILM 40 MICRON CAST BOPP FILM 30 MICRON CAST BOPP FILM SYNTHETIC HOT MELT ADHESIVE SYNTHETIC HOT MELT ADHESIVE EMULSION ACRYLIC ADHESIVE EMULSION ACRYLIC ADHESIVE SYNTHETIC HOT MELT ADHESIVE FIBERGLASS REINFORCED
TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 27 TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 42 TENSILE (LBS/IN WIDTH) 100 TENSILE (LBS/IN WIDTH) 27 TENSILE (LBS/IN WIDTH) 30 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 44 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 58 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 70 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 25 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 27 HOLDING POWER TO FIBERBOARD (MINUTES) 15,000 HOLDING POWER TO FIBERBOARD (MINUTES) 30,000 THICKNESS (MILS) 4.5 THICKNESS (MILS) 2.2 THICKNESS (MILS) 2.5 THICKNESS (MILS) 1.9 THICKNESS (MILS) 3.0 ELONGATION (%) 3.7 ELONGATION (%) 150 ELONGATION (%) 150 ELONGATION (%) 150 ELONGATION (%) 150 SERVICE TEMPERATURE RANGE (°F) -10 - 150 APPLICATION TEMPERATURE RANGE (°F) 20 - 110 APPLICATION TEMPERATURE RANGE (°F) 20 - 110 APPLICATION TEMPERATURE RANGE (°F) 35 - 110 APPLICATION TEMPERATURE RANGE (°F) 35 - 110 APPLICABLE STANDARDS* - SERVICE TEMPERATURE RANGE (°F) -20 - 180 SERVICE TEMPERATURE RANGE (°F) -20 - 180 SERVICE TEMPERATURE RANGE (°F) -20 - 150 SERVICE TEMPERATURE RANGE (°F) -20 - 150 APPLICABLE STANDARDS* 25, 28 APPLICABLE STANDARDS* 25, 28 APPLICABLE STANDARDS* 4, 18, 25 APPLICABLE STANDARDS* 4, 9, 18 For manual and automated industrial sealing of For heavy duty manual and automated industrial sealing Custom-printed to prevent pilferage and allow For use on Siat L33, L36, L233 (or equivalent) surface For use on Siat L33, L36, L233 (or equivalent) surface medium-weight cartons in extreme temperature of cartons exposed to rough handling and load stress; personalization of outgoing cartons; For manual printing presses; For manual or automated industrial printing presses; For general purpose strapping, environments or subjected to handling stress. Also used for critical closure of bulky packages. or automated industrial carton sealing of medium- carton sealing of heavy, bulky cartons, including packaging, bundling and palletizing applications. **Tan not compliant with standards 25, 28 **Tan not compliant with standards 25, 28 weight cartons in normal manufacturing and shipping overstuffed or under-filled cartons, in high stress and environments. extreme handling conditions.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 16 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 17
SOLVENT-BASED ACRYLIC CARTON SEALING CLEAR TO THE CORE PACKAGING OFFICE & SPECIALTY PACKAGING LABEL PROTECTION
PP 802 PP 810 PP 803 CT 109 VF 719 AP 15
PREMIUM PLUS GRADE PREMIUM GRADE PREMIUM PLUS GRADE GENERAL PURPOSE GRADE ECONOMY GRADE SHIPPING GRADE 25 MICRON CAST BOPP FILM 25 MICRON CAST BOPP FILM 30 MICRON CAST BOPP FILM CELLULOSE FILM PRINTABLE UPVC FILM 25 MICRON CAST BOPP FILM SOLVENT-BASED ACRYLIC ADHESIVE SOLVENT-BASED ACRYLIC ADHESIVE SOLVENT-BASED ACRYLIC ADHESIVE STATIC-FREE NATURAL RUBBER ADHESIVE EMULSION ACRYLIC ADHESIVE RUBBER-BASED ADHESIVE
TENSILE (LBS/IN WIDTH) 22 TENSILE (LBS/IN WIDTH) 22 TENSILE (LBS/IN WIDTH) 25 TENSILE (LBS/IN WIDTH) 22 TENSILE (LBS/IN WIDTH) 23 TENSILE (LBS/IN WIDTH) 20 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 25 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 22 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 25 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 35 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 13 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 19 THICKNESS (MILS) 2.0 THICKNESS (MILS) 1.8 THICKNESS (MILS) 2.2 THICKNESS (MILS) 1.7 THICKNESS (MILS) 1.9 THICKNESS (MILS) 1.6 ELONGATION (%) 140 ELONGATION (%) 140 ELONGATION (%) 150 ELONGATION (%) 18 ELONGATION (%) 60 ELONGATION (%) 150 APPLICATION TEMPERATURE RANGE (°F) 20 - 110 APPLICATION TEMPERATURE RANGE (°F) 20 - 110 APPLICATION TEMPERATURE RANGE (°F) 20 - 110 MAXIMUM SERVICE TEMPERATURE (°F) 265 MAXIMUM SERVICE TEMPERATURE (°F) 150 APPLICATION TEMPERATURE RANGE (°F) 20 - 110 SERVICE TEMPERATURE RANGE (°F) -20 - 180 SERVICE TEMPERATURE RANGE (°F) -20 - 180 SERVICE TEMPERATURE RANGE (°F) -20 - 180 APPLICABLE STANDARDS* 16 APPLICABLE STANDARDS* 20 SERVICE TEMPERATURE RANGE (°F) -20 - 180 APPLICABLE STANDARDS* 18 APPLICABLE STANDARDS* 18 APPLICABLE STANDARDS* 18 APPLICABLE STANDARDS* 25 For sealing, packaging and mending applications, For use with a hand dispenser to seal cartons with For light duty sealing, repairing and bundling of For sealing light- to medium-weight cartons in everyday For overlamination, label protection and carton closure particularly involving hard-to-stick-to surfaces; Also used recycled fiber content, heavy ink coverage or rough For protecting shipping labels and other printed surfaces corrugated cartons, paper and film containers; Use with shipping and handling environments; Also used for applications that demand 100 percent clarity; For use in for splicing applications. surfaces. against weather and handling. a hand-held or machine dispenser. bundling and securing loose objects; Can also be used a broad range of temperatures. to repair corrugated cartons, paper and film containers; Use with a hand-held dispenser.
PP 815 JLAR PP 808 PP 807
HEAVY DUTY GRADE SPECIALTY GRADE GENERAL PURPOSE GRADE PREMIUM GRADE 40 MICRON CAST BOPP FILM BOPP FILM UPVC FILM 25 MICRON CAST BOPP FILM SOLVENT-BASED ACRYLIC ADHESIVE SOLVENT-BASED ACRYLIC ADHESIVE NATURAL RUBBER ADHESIVE SOLVENT-BASED ACRYLIC ADHESIVE
TENSILE (LBS/IN WIDTH) 26 TENSILE (LBS/IN WIDTH) 24 TENSILE (LBS/IN WIDTH) 27 TENSILE (LBS/IN WIDTH) 20 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 28 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 30 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 24 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 23 THICKNESS (MILS) 2.6 THICKNESS (MILS) 2.6 THICKNESS (MILS) 2.1 THICKNESS (MILS) 1.8 ELONGATION (%) 140 ELONGATION (%) 140 ELONGATION (%) 60 ELONGATION (%) 140 APPLICATION TEMPERATURE RANGE (°F) 20 - 110 APPLICATION TEMPERATURE RANGE (°F) 20 - 110 MAXIMUM SERVICE TEMPERATURE (°F) 150 APPLICATION TEMPERATURE RANGE (°F) 20 - 110 SERVICE TEMPERATURE RANGE (°F) -20 - 180 SERVICE TEMPERATURE RANGE (°F) -20 - 180 APPLICABLE STANDARDS* - SERVICE TEMPERATURE RANGE (°F) -20 - 180 APPLICABLE STANDARDS* 18 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* - For lightweight bag sealing, banding, bundling and For critical sealing and repairing of corrugated For overlamination and label protection applications packaging applications; Also used for color-coding tasks. For moisture-proof protection of labels and handling containers in hot and cold environments; Use with a that demand a clear to the core tape; Also used for light instructions; Also used for industrial and production hand-held dispenser. duty packaging, paper repair and mending, and holding laminating, joining, covering and protecting jobs. applications; Recommended for use with counter and desk dispensers.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 18 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 19
TENSILIZED STRAPPING FILAMENT STRAPPING
PS 748 GS 490 GS 500 GS 501
UTILITY GRADE ECONOMY GRADE UTILITY GRADE INDUSTRIAL GRADE TENSILIZED, MOPP FILM CAST BOPP FILM CAST BOPP FILM CAST BOPP FILM EMULSION ACRYLIC ADHESIVE SYNTHETIC HOT MELT ADHESIVE SYNTHETIC HOT MELT ADHESIVE SYNTHETIC HOT MELT ADHESIVE FIBERGLASS REINFORCED FIBERGLASS REINFORCED FIBERGLASS REINFORCED
TENSILE (LBS/IN WIDTH) 100 TENSILE (LBS/IN WIDTH) 100 TENSILE (LBS/IN WIDTH) 150 TENSILE (LBS/IN WIDTH) 175 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 34 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 70 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 70 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 70 THICKNESS (MILS) 2.8 THICKNESS (MILS) 4.5 THICKNESS (MILS) 5.2 THICKNESS (MILS) 5.4 ELONGATION (%) 30 ELONGATION (%) 3.7 ELONGATION (%) 3.7 ELONGATION (%) 3.7 SERVICE TEMPERATURE RANGE (°F) 0 - 250 SERVICE TEMPERATURE RANGE (°F) -10 - 150 SERVICE TEMPERATURE RANGE (°F) -10 - 150 SERVICE TEMPERATURE RANGE (°F) -10 - 150 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* 25, 28 APPLICABLE STANDARDS* 25, 28 APPLICABLE STANDARDS* 25, 28
For light duty strapping, packaging, bundling and For light duty strapping, packaging, bundling and For general duty strapping, packaging, bundling and For medium duty strapping, packaging, bundling and palletizing applications. palletizing applications. palletizing jobs. palletizing applications.
PS 750 GS 521 GS 531
HEAVY DUTY GRADE HIGH PERFORMANCE GRADE PREMIUM GRADE TENSILIZED, MOPP FILM CAST BOPP FILM POLYESTER FILM (PET) EMULSION ACRYLIC ADHESIVE SYNTHETIC HOT MELT ADHESIVE SYNTHETIC HOT MELT ADHESIVE FIBERGLASS REINFORCED FIBERGLASS REINFORCED
TENSILE (LBS/IN WIDTH) 145 TENSILE (LBS/IN WIDTH) 300 TENSILE (LBS/IN WIDTH) 300 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 45 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 70 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 70 THICKNESS (MILS) 5.0 THICKNESS (MILS) 6.3 THICKNESS (MILS) 6.7 ELONGATION (%) 30 ELONGATION (%) 3.7 ELONGATION (%) 3.7 SERVICE TEMPERATURE RANGE (°F) 0 - 250 SERVICE TEMPERATURE RANGE (°F) -10 - 150 SERVICE TEMPERATURE RANGE (°F) -10 - 150 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* 6, 25, 28 APPLICABLE STANDARDS* 6, 25, 28
For heavy duty strapping, bundling, banding, palletizing For heavy duty closing, strapping, packaging, bundling, For heavy duty, maximum security closing, strapping, and reinforcing applications. unitizing, palletizing and L-Clip applications. packaging, protecting, bundling, reinforcing, sealing, unitizing, palletizing and L-Clip applications.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 20 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 21
WATER ACTIVATED PAPER
GP 100 WP 100 WP 200
LIGHT DUTY GRADE ECONOMY GRADE PRODUCTION GRADE NON-REINFORCED KRAFT PAPER REINFORCED KRAFT PAPER REINFORCED KRAFT PAPER WATER ACTIVATED ADHESIVE 110 FIBERGLASS 75/150 FIBERGLASS WATER ACTIVATED ADHESIVE WATER ACTIVATED ADHESIVE
PAPER SHEET (LBS) 57 MD TENSILE (LBS/IN WIDTH) 63 MD TENSILE (LBS/IN WIDTH) 66 MD TENSILE (LBS/IN WIDTH) 45 CD TENSILE (LBS/IN WIDTH) 23 CD TENSILE (LBS/IN WIDTH) 27 CD TENSILE (LBS/IN WIDTH) 23 TOP SHEET (LBS) 20 TOP SHEET (LBS) 20 APPLICABLE STANDARDS* - BOTTOM SHEET (LBS) 23 BOTTOM SHEET (LBS) 25 MD PATTERN 1-1-1-1 MD PATTERN 1-1-1-1-1 MD SPACING (IN) 9/16 MD SPACING (IN) 9/16 CD SPACING (IN) 1 CD SPACING (IN) 1 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* -
For light to medium duty packaging applications such as For sealing lightweight cartons up to 20 lbs with minimal For sealing medium-weight cartons up to 30 lbs in inner carton sealing or palletized loads. exposure to handling, shipping and load stress. normal manufacturing and shipping environments; Ideal for single parcel shipments.
WP 300 WP 400
PERFORMANCE GRADE HEAVY DUTY GRADE REINFORCED KRAFT PAPER REINFORCED KRAFT PAPER 75/150 FIBERGLASS 75/150 FIBERGLASS WATER ACTIVATED ADHESIVE WATER ACTIVATED ADHESIVE
MD TENSILE (LBS/IN WIDTH) 83 MD TENSILE (LBS/IN WIDTH) 89 CD TENSILE (LBS/IN WIDTH) 30 CD TENSILE (LBS/IN WIDTH) 32 TOP SHEET (LBS) 25 TOP SHEET (LBS) 25 BOTTOM SHEET (LBS) 25 BOTTOM SHEET (LBS) 30 MD PATTERN 2-1-1-1-1-2 MD PATTERN 2-2-1-1-2-2 MD SPACING (IN) 1/2 MD SPACING (IN) 1/2 CD SPACING (IN) 1.5 CD SPACING (IN) 17/32 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* -
For critical closure of medium-weight cartons up to For sealing large, bulky or heavy content cartons up to 55 lbs in all environments, including those subjected to 65 lbs in moderate to severe handling environments; handling stress; Ideal for single parcel shipments. Ideal for single parcel shipments.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 22 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 23
MANUAL TAPE APPLICATION – HAND-HELD MANUAL TAPE APPLICATION – TABLETOP
SD 932 SD 934 SD 936 SD 931 SD 937 SD 955
STANDARD GRADE PROFESSIONAL GRADE DELUXE SILENCER LABEL PROTECTION DISPENSER BAG-SEALING DISPENSER DESKTOP TAPE DISPENSER PISTOL-GRIP TAPE DISPENSER PISTOL-GRIP TAPE DISPENSER PISTOL-GRIP TAPE DISPENSER HIGH IMPACT PLASTIC METAL-FRAMED HIGH IMPACT PLASTIC WITH ANTI-REVERSE BAR HIGH IMPACT HANDLE, METAL FRAME HIGH IMPACT HANDLE, METAL FRAME 4 IN WIDTH MAXIMUM USE 9 MM WIDTH MAXIMUM USE 1 IN WIDTH MAXIMUM USE 2 IN WIDTH MAXIMUM USE 2 IN WIDTH MAXIMUM USE 2 IN WIDTH MAXIMUM USE For manual carton sealing applications. For manual carton sealing applications. For manual carton sealing applications. For use on packing lists, sales slips and labels. For single-stroke bag sealing applications. For mending and light duty splicing tasks. Use with tapes with a 1-in or 3-in inside diameter core.
RECOMMENDED PRODUCTS RECOMMENDED PRODUCTS RECOMMENDED PRODUCTS RECOMMENDED PRODUCTS RECOMMENDED PRODUCTS RECOMMENDED PRODUCTS AP Series, HP Series, PP Series, FP 96, FP 97, FP 202, AP Series, HP Series, PP Series, FP 96, FP 97, FP 202, AP Series, HP Series, PP Series, FP 96, FP 97, FP 202, AP 15, PP 807 PP 808 CT 109 VF 719 VF 719 VF 719
AUTOMATED TAPE APPLICATION
SD 935 SD 999 SD 930 SP 222
PROFESSIONAL GRADE FILAMENT TAPE DISPENSER ECONOMY GRADE RETROFIT TAPE HEAD PISTOL-GRIP TAPE DISPENSER METAL-FRAMED CLAMSHELL TAPE DISPENSER STAINLESS STEEL/ANODIZED ALUMINUM HIGH IMPACT HANDLE, METAL FRAME 1 IN WIDTH MAXIMUM USE HIGH IMPACT PLASTIC AVAILABLE IN 2- AND 3-INCH 3 IN WIDTH MAXIMUM USE 2 IN WIDTH MAXIMUM USE For manual carton sealing applications. For manual closing, strapping, packaging, bundling and For manual packaging applications. For industrial automated carton sealing applications. palletizing applications.
RECOMMENDED PRODUCTS RECOMMENDED PRODUCTS RECOMMENDED PRODUCTS AP Series, HP Series, PP Series, FP 96, FP 97, FP 202, GS Series, PS Series AP Series, HP Series, PP Series, FP 96, FP 97, FP 202, VF 719 VF 719
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 24 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 25
7000 SERIES 8000 SERIES (QUICK CHANGE)
7000 Series Tape Applicators feature The 8000 Series Quick Change Sealing System is uniquely ® • Easy retrofit into existing erectors and sealers engineered to tackle the downtime associated with slow tape roll • Stainless steel wash-down ready construction changeovers, while offering all the benefits of the 7000 Series ShurSEAL • Open design for easy threading Applicators. • Front and rear tape tab adjustments • Tape roll changes in less than 10 seconds • Good to the Core® tape for less material waste • Interchangeable inserts allow for easy offline threading PACKAGING SOLUTIONS • Consistent seals at speeds up to 200 fpm • Lightweight inserts reduce operator strain and lifting • Multiple wipe-down points for the full use of tape’s adhesive • Retrofits to existing erectors and sealers
FOLDED-EDGE® TECHNOLOGY At Shurtape, we’ve taken a holistic approach to case sealing and developed A patented feature on the tape applicator that strategic partnerships to offer packaging tapes and tape application technologies folds the edges of the tape as it’s applied, that together deliver better carton seals and packaging line efficiency. The result reinforcing seal strength and creating a ready is ShurSEAL Packaging Solutions, a case sealing system that combines HP Series to open seal that doesn’t require a knife. packaging tape with PrimeLoc™ tape applicators to enhance your case sealing • Smoother tape application results in better production throughput operations. • Increased seal strength at major flaps for added security • Reduce material waste • Easy, no-knife opening reduces risk of • Reduce downtime product damage and worker injury • Increase safety • Increase content security PRIME ALERT • Reduce maintenance costs Tape monitoring system that is self- contained, wireless and self-recharging. Signals line operators if these faults occur: low tape, no tape, broken tape, uncut tape and case jams. Available with optional light tree and PLC integration to shut down conveyors to prevent missed FOR MORE DETAILS VISIT seals from reaching palletizer. ShurSEALSecure.com
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGEShurtape® 50 is FOR an authorized APPLICABLE distributor of PrimeLoc STANDARDS Packaging, Inc. ShurSEAL is a trademark of Shurtape Technologies, LLC; PrimeLoc is a trademark of PrimeLoc Packaging, Inc. 26 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 27 CLOTH & DUCT TAPES
WE KNOW ALL JOBS HAVE ONE THING IN COMMON: THEY MUST BE DONE RIGHT. THAT’S WHY OUR COMPLETE LINE OF
CLOTH AND DUCT TAPES IS ENGINEERED TO EXACTING SPECS.
WHEN EASY HANDLING, VARYING ADHESION LEVELS AND
DURABLE CONSTRUCTION CHARACTERISTICS ARE NEEDED,
TRUST SHURTAPE TO GIVE EVERY JOB A DISTINCTIVE MARK OF EXCELLENCE.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 28 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 29
CO-EXTRUDED DUCT SHURGRIP®CO-EXTRUDED DUCT
PC 590 PC 595 PC 460 PC 589
When these tapes are combined with other reduced VOC adhesives and sealants used throughout a ECONOMY GRADE GENERAL PURPOSE GRADE building, that building is eligible SHURGRIP® UTILITY GRADE SHURGRIP® LIGHT DUTY GOOD CONFORMABILITY GOOD CONFORMABILITY to receive credit toward LEED®* GOOD CONFORMABILITY GOOD SHEAR AND ADHESION NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE certification. In commercial buildings, NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE the credit is one point; in residential TENSILE (LBS/IN WIDTH) 20 TENSILE (LBS/IN WIDTH) 21 construction, the credit is one-half TENSILE (LBS/IN WIDTH) 17 TENSILE (LBS/IN WIDTH) 18 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 54 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 55 point. That might not seem like a lot, ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 86 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 106 THICKNESS (MILS) 7.0 THICKNESS (MILS) 8.0 but at Shurtape, we believe it takes THICKNESS (MILS) 6.0 THICKNESS (MILS) 7.0 ELONGATION (%) 20 ELONGATION (%) 20 everyone doing their part to protect ELONGATION (%) 20 ELONGATION (%) 21 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 and preserve our environment. SERVICE TEMPERATURE RANGE (°F) 40 - 200 SERVICE TEMPERATURE RANGE (°F) 40 - 200 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* 34, 52 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* 30, 52
For non-critical, general purpose use in packaging, For non-critical, general purpose packaging, bundling, *LEED is a registered trademark owned by the For non-critical, general purpose use in packaging, For light duty sealing, seaming, repairing, holding and U.S. Green Building Council. bundling, sealing, seaming, repairing, holding and sealing, seaming, repairing, holding and waterproofing; bundling, sealing, repairing, holding and waterproofing; waterproofing applications that require aggressive stick waterproofing; Also used in the remediation and Also used in plumbing applications and in the Also used in the remediation/abatement industry as a and superior hold; For temporary or permanent use. restoration industries. remediation and restoration industries. gooseneck tape.
PC 600S PC 618S PC 593 PC 599
For ultimate performance, choose Shurtape duct tapes with Polybonded CO-EX Technology®. The co-extrusion process melds polyethylene, cloth ALL-PURPOSE GRADE PERFORMANCE GRADE SHURGRIP® MEDIUM DUTY SHURGRIP® HEAVY DUTY and adhesive in a single, high- CONFORMABLE EXCELLENT CONFORMABILITY GOOD SHEAR AND ADHESION EXCELLENT SHEAR AND ADHESION temperature step, resulting in a NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE permanent, airtight bond. This seamless construction creates added TENSILE (LBS/IN WIDTH) 22 TENSILE (LBS/IN WIDTH) 27 strength and will not delaminate. TENSILE (LBS/IN WIDTH) 19 TENSILE (LBS/IN WIDTH) 20 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 50 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 55 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 127 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 131 THICKNESS (MILS) 9.0 THICKNESS (MILS) 10.0 THICKNESS (MILS) 8.0 THICKNESS (MILS) 9.0 ELONGATION (%) 16 ELONGATION (%) 17 ELONGATION (%) 21 ELONGATION (%) 21 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 40 - 200 SERVICE TEMPERATURE RANGE (°F) 40 - 200 APPLICABLE STANDARDS* 5 APPLICABLE STANDARDS* 38, 52 APPLICABLE STANDARDS* 30, 52 APPLICABLE STANDARDS* 30, 52
For general purpose use in industrial, carpet, plumbing, For holding, securing, seaming, repairing, bundling, For medium duty sealing, seaming, repairing, holding For heavy duty sealing, seaming, repairing, holding and HVAC, sealing, waterproofing, patching, remediation and splicing, packaging and masking in HVAC, industrial, and waterproofing applications that require aggressive waterproofing applications that require aggressive stick restoration applications. commercial, utilities, trucking and automotive stick and superior hold; Also used in the restoration and superior hold; Also used in the restoration industry; applications; Can also be used as a condensation barrier industry; For temporary or permanent use. For temporary or permanent use. in appliance assemblies.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTHCLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 30 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 31
COLORED & PRINTED DUCT PERFORMANCE DUCT
PC 600C PC 618C PC 619 PC 609 PC 610 PC 629
ALL-PURPOSE GRADE PERFORMANCE GRADE SPECIALTY GRADE PERFORMANCE GRADE PERFORMANCE GRADE ABATEMENT INDUSTRIAL GRADE ABATEMENT CONFORMABLE EXCELLENT CONFORMABILITY CONFORMABLE EXCELLENT HOLD SUPERIOR HOLD SUPERIOR HOLD NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE BLENDED RUBBER ADHESIVE BLENDED RUBBER ADHESIVE BLENDED RUBBER ADHESIVE
TENSILE (LBS/IN WIDTH) 22 TENSILE (LBS/IN WIDTH) 27 TENSILE (LBS/IN WIDTH) 22 TENSILE (LBS/IN WIDTH) 22 TENSILE (LBS/IN WIDTH) 21 TENSILE (LBS/IN WIDTH) 27 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 50 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 55 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 50 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 71 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 56 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 58 THICKNESS (MILS) 9.0 THICKNESS (MILS) 10.0 THICKNESS (MILS) 9.0 THICKNESS (MILS) 10.0 THICKNESS (MILS) 10.0 THICKNESS (MILS) 11.0 ELONGATION (%) 16 ELONGATION (%) 17 ELONGATION (%) 16 ELONGATION (%) 16 ELONGATION (%) 18 ELONGATION (%) 20 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 25 - 200 SERVICE TEMPERATURE RANGE (°F) 25 - 200 SERVICE TEMPERATURE RANGE (°F) 25 - 200 APPLICABLE STANDARDS* 5 APPLICABLE STANDARDS* 38, 52 APPLICABLE STANDARDS* 5 APPLICABLE STANDARDS* 30, 52 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* -
For general purpose use in industrial, plumbing, carpet, For holding, securing, seaming, repairing, bundling, For general use, including color-coding, labeling, For use in the HVAC industry to repair thermal insulation For sealing walls, doors and windows in abatement For sealing walls, doors and windows in abatement color-coding and splicing applications, as well as home splicing, packaging and masking in HVAC, industrial, floor marking and book-binding; Also used for stage and flexible ducts, and to seal metal ductwork; Used applications; Ideal for use on rugged jobs in warm and applications; Ideal for use on rugged jobs in warm and and general repair applications, particularly where a commercial, utilities, trucking and automotive preparation in the motion picture and audio/visual in the manufactured housing industry to seam bottom cold climates, as well as dry and wet environments. cold climates, as well as dry and wet environments. boards and for patching, seaming and sealing; Used for discreet fix is needed. applications; Can also be used as a condensation barrier industries; Can also be used for a variety of applications packaging, bundling, holding, wrapping and waterproofing; in appliance assemblies. in the hospitality, motorsports and floral industries. Also used for asbestos and mold remediation.
PC 626 SF 682 SF 683
SPECIALTY GRADE SHURFLEX® PROFESSIONAL GRADE SHURFLEX® PROFESSIONAL GRADE LUSTERLESS CAMOUFLAGE FLEXIBLE AND CONFORMABLE FLEXIBLE AND CONFORMABLE OFFICIAL ARMY ACU DIGITAL NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE
TENSILE (LBS/IN WIDTH) 23 TENSILE (LBS/IN WIDTH) 25 TENSILE (LBS/IN WIDTH) 25 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 48 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 55 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 55 THICKNESS (MILS) 10.0 THICKNESS (MILS) 10.0 THICKNESS (MILS) 10.0 ELONGATION (%) 20 ELONGATION (%) 18 ELONGATION (%) 18 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 APPLICABLE STANDARDS* 5 APPLICABLE STANDARDS* 31, 52 APPLICABLE STANDARDS* 31, 52
For sealing, waterproofing, holding, camouflaging, sound For use in the HVAC industry for airtight and moisture- For use in the HVAC industry for airtight and moisture- deadening, covering reflective surfaces and patching free seaming, connecting, splicing, patching and sealing free seaming, connecting, splicing, patching and sealing applications. of sheet metal and flex duct, rigid duct boards, air vents, of sheet metal and flex duct, insulation, rigid duct insulation, fibrous filter banks and pollution collection boards, air vents and fiber board. systems.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTHCLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 32 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 33
HEAVY DUTY DUCT SUPER PERFORMANCE DUCT SPECIALTY PERFORMANCE DUCT
PC 621 PC 721 PC 658 PC 623 PC 624 PC 625
PROFESSIONAL GRADE EXTREME HOLD PROFESSIONAL GRADE SUPER BOTTOM BOARD ECONOMICAL NUCLEAR GRADE NUCLEAR GRADE MILITARY SPEC LUSTERLESS EXCELLENT CONFORMABILITY EXCELLENT CONFORMABILITY SUPERIOR ADHESION AND HOLD EXCELLENT HOLDING POWER EXCELLENT HOLDING POWER EXCELLENT HOLDING POWER NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE MEETS ASME NQA-1 GUIDELINES MEETS ASME NQA-1 GUIDELINES ASTM D5486M TESTED
TENSILE (LBS/IN WIDTH) 27 TENSILE (LBS/IN WIDTH) 32 TENSILE (LBS/IN WIDTH) 30 TENSILE (LBS/IN WIDTH) 28 TENSILE (LBS/IN WIDTH) 36 TENSILE (LBS/IN WIDTH) 45 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 62 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 60 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 125 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 58 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 60 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 50 THICKNESS (MILS) 11.0 THICKNESS (MILS) 11.5 THICKNESS (MILS) 17.0 THICKNESS (MILS) 11.5 THICKNESS (MILS) 13.0 THICKNESS (MILS) 12.5 ELONGATION (%) 10 ELONGATION (%) 24 ELONGATION (%) 10 ELONGATION (%) 12 ELONGATION (%) 14 ELONGATION (%) 12 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 APPLICABLE STANDARDS* 34, 52 APPLICABLE STANDARDS* 34, 52 APPLICABLE STANDARDS* 37, 52 APPLICABLE STANDARDS* 2, 3, 46 APPLICABLE STANDARDS* 2, 3, 46 APPLICABLE STANDARDS* 10
For demanding HVAC applications to hold, seal and seam For demanding HVAC applications to hold, seal and For seaming and sealing bottom board materials in For a variety of purposes in the construction, operation For a more robust variety of purposes in the For use as a premium, waterproof packaging tape that sheet metal and flex duct, exhaust vents and preformed seam sheet metal; Can also be used for heavy duty pre-manufactured housing and RV assembly, set-up and and maintenance of nuclear power facilities; Can also construction, operation and maintenance of nuclear meets government specifications; Can also be used for insulation; Can also be used in industrial applications for industrial applications like holding, bundling, splicing, maintenance; Can also be used to protect surfaces in be used for holding to stainless steel pipes, color-coding power facilities; Can also be used for holding to stainless moisture-proofing cartons, canisters and tubing. holding, splicing, protecting and packaging. protecting and packaging. metal-peening operations. and sealing endcaps on stainless steel pipes. steel pipes, color-coding and sealing endcaps on stainless steel pipes.
PC 657® T-REX®
HEAVY DUTY PROFESSIONAL GRADE SUPER-TOUGH, ALL-WEATHER EXCELLENT HOLD QUICK STICK NATURAL RUBBER ADHESIVE NATURAL RUBBER ADHESIVE
TENSILE (LBS/IN WIDTH) 29 TENSILE (LBS/IN WIDTH) 52 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 104 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 90 THICKNESS (MILS) 14.5 THICKNESS (MILS) 17.0 ELONGATION (%) 11 ELONGATION (%) 10 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 APPLICABLE STANDARDS* 40, 52 APPLICABLE STANDARDS* -
For use in high performance motorsports applications, For use on rough or dirty surfaces; For heavy duty repairs pre-manufactured housing and RV assembly, critical that demand a ferociously strong hold; Can also be used industrial applications and for protection during metal- as a bottom board tape in the manufactured housing peening operations. industry.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTHCLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 34 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 35
COATED CLOTH
P- 628 P- 661 P- 660 P- 665®
PROFESSIONAL GRADE GAFFER’S GLOW-IN-THE-DARK GAFFER’S PROFESSIONAL GRADE GAFFER’S PROFESSIONAL GRADE GAFFER’S MATTE-FINISH BACKING WRITABLE/PRINTABLE MATTE-FINISH BACKING MATTE-FINISH BACKING HIGH TENSILE AND HOLDING POWER HIGH ADHESION AND TACK HIGH TENSILE AND HOLDING POWER HIGH ADHESION AND TACK SYNTHETIC RUBBER ADHESIVE SYNTHETIC RUBBER ADHESIVE SYNTHETIC RUBBER ADHESIVE SYNTHETIC RUBBER ADHESIVE
TENSILE (LBS/IN WIDTH) 50 TENSILE (LBS/IN WIDTH) 50 TENSILE (LBS/IN WIDTH) 50 TENSILE (LBS/IN WIDTH) 50 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 75 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 80 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 75 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 80 THICKNESS (MILS) 10.75 THICKNESS (MILS) 13.0 THICKNESS (MILS) 10.75 THICKNESS (MILS) 11.0 ELONGATION (%) 4 ELONGATION (%) 4 ELONGATION (%) 4 ELONGATION (%) 4 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* 5, 14 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* 17
For use in the convention, hospitality, exhibition and Used for a multitude of applications, including safety For bundling or securing wires, cables and props in the For demanding applications that require clean removal trade show industries, and for general use in the audio/ marking, in the audio/visual, television, photography, audio/visual, television, photography, theatrical and in the audio/visual, television, photography, theatrical visual, television, photography, theatrical and motion theatrical and motion picture industries; Also used for motion picture industries; Also used for color-coding, and motion picture industries, such as holding wiring, picture industries; Used for protection and book-binding, labeling and marking various objects, such as: safety/ labeling, marking and book-binding applications. Will lighting and props. color-coding, labeling and stage marking; Also used in critical equipment, exit/directional signage, tripping fluoresce under black light. the HVAC industry. hazards, access handles, sports equipment and tools.
P- 672® P- 691® P- 68 P- 670
PREMIUM GRADE GAFFER’S PREMIUM GRADE GAFFER’S PREMIUM GRADE GAFFER’S HEAVY DUTY DUCT TAPE LIGHT DUTY MEDIUM DUTY HEAVY DUTY POLYETHYLENE COATED BACKING MATTE-FINISH BACKING MATTE-FINISH BACKING MATTE-FINISH BACKING SYNTHETIC RUBBER ADHESIVE SYNTHETIC RUBBER ADHESIVE SYNTHETIC RUBBER ADHESIVE SYNTHETIC RUBBER ADHESIVE
TENSILE (LBS/IN WIDTH) 70 TENSILE (LBS/IN WIDTH) 70 TENSILE (LBS/IN WIDTH) 70 TENSILE (LBS/IN WIDTH) 30 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 77 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 80 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 83 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 95 THICKNESS (MILS) 12.0 THICKNESS (MILS) 12.25 THICKNESS (MILS) 12.5 THICKNESS (MILS) 11.5 ELONGATION (%) 6 ELONGATION (%) 6 ELONGATION (%) 6 ELONGATION (%) 3 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 -200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 APPLICABLE STANDARDS* 17 APPLICABLE STANDARDS* 17, 44 APPLICABLE STANDARDS* 17 APPLICABLE STANDARDS* -
For sealing containers and protection from welding For sealing containers and rooms, abrasion protection, For book-binding, color-coding and gaffer’s applications; For sealing and seaming ductwork in the HVAC industry; splatter; Can also be used for general holding, bundling and general holding, bundling and repair applications; For sealing containers and rooms, abrasion protection, Can also be used for protection, splicing, bundling, and temporary repair applications. Meets water leachable requirements for detrimental and general holding, bundling and repair applications. seaming and sealing applications that demand higher elements (Fl & Br <250PPM; S & C<500PPM) in tensile strength and easy tear capabilities; For temporary accordance with MIL-STD-2041D. and permanent uses in the auto industry.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTHCLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 36 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 37
STUCCO MASKING
PC 567 PC 667 PC 668 PE 333 PE 444 PE 555
SPECIALTY GRADE, CLOTH DUCT SPECIALTY GRADE, CLOTH DUCT SPECIALTY GRADE, CLOTH DUCT POLYETHYLENE FILM POLYETHYLENE FILM POLYETHYLENE FILM CONFORMABLE TO MOST SURFACES EASY TO TEAR HOLDS STRONG SERRATED OR STRAIGHT EDGE MAINTAINS A WATERTIGHT SEAL EXCELLENT TEARABILITY BLENDED RUBBER ADHESIVE BLENDED RUBBER ADHESIVE SYNTHETIC/NATURAL RUBBER ADHESIVE MAINTAINS A WATERTIGHT SEAL SYNTHETIC RUBBER ADHESIVE SYNTHETIC RUBBER ADHESIVE SYNTHETIC RUBBER ADHESIVE
TENSILE (LBS/IN WIDTH) 21 TENSILE (LBS/IN WIDTH) 22 TENSILE (LBS/IN WIDTH) 27.5 TENSILE (LBS/IN WIDTH) 19 TENSILE (LBS/IN WIDTH) 19 TENSILE (LBS/IN WIDTH) 27 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 46 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 50 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 70 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 70 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 80 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 92 THICKNESS (MILS) 8.0 THICKNESS (MILS) 9.0 THICKNESS (MILS) 11.0 THICKNESS (MILS) 7.0 THICKNESS (MILS) 7.0 THICKNESS (MILS) 9.0 ELONGATION (%) 14 ELONGATION (%) 15 ELONGATION (%) 15 ELONGATION (%) 80 ELONGATION (%) 76 ELONGATION (%) 94 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 50 - 200 SERVICE TEMPERATURE RANGE (°F) 32 - 160 SERVICE TEMPERATURE RANGE (°F) 32 - 160 SERVICE TEMPERATURE RANGE (°F) 32 - 160 APPLICABLE STANDARDS* 30, 52 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* - APPLICABLE STANDARDS* - APPLICABLE STANDARDS* - APPLICABLE STANDARDS* -
For protecting surfaces when pressure washing and For protective masking of non-painted surfaces, For two- and three-step (scratch, brown and finish) For masking surfaces, such as windows and doors, For masking surfaces, such as windows and doors, For masking surfaces during stucco application and applying stucco. including steel, vinyl, aluminum and anodized metals; stucco processes where the job requirements dictate during stucco application and painting when UV during stucco application and painting; Delivers painting; Can also be used for surface protection, Use in plastering, stucco, concrete, pool and tile the protective barrier be left in place for the entire resistance is not required; Also for seaming under slab residue-free removal for a variety of applications. color-coding, splicing and seaming on pipe-fitting applications. application. vapor barriers; Delivers residue-free removal for a variety covers; Delivers residue-free removal for a variety of of applications. applications.
DOOR U DOOR U DOOR U UT S UT S UT S O E O E O E 14 14 14
PC 622
PREMIUM GRADE CLOTH DUCT CONFORMABLE WITH EXCELLENT HOLD NATURAL RUBBER ADHESIVE
TENSILE (LBS/IN WIDTH) 36 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 60 THICKNESS (MILS) 12.5 ELONGATION (%) 14 SERVICE TEMPERATURE RANGE (°F) 50 - 200 APPLICABLE STANDARDS* 36, 52
For protecting window and door frames during stucco applications; Used in high performance motorsports; For heavy duty bundling, holding and splicing.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTHCLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 38 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 39
FOIL & FILM TAPES
WE KNOW YOUR REPUTATION IS ON THE LINE. THAT’S WHY WE OFFER A COMPREHENSIVE LINE OF FOIL, FILM AND
COMPOSITE HVAC TAPES THAT ARE ENGINEERED TO DELIVER
FULL SYSTEM CLOSURE. WITH OPTIONS TO MEET THE CODE,
PERFORM IN THE COLD AND HELP YOU QUALIFY FOR LEED®
CREDITS, SHURTAPE HAS YOU COVERED WITH THE TAPES YOU
NEED TO ENSURE EVERYTHING IS PROPERLY SEALED TO YOUR EXACTING STANDARDS.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 40 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 41
UL 181B-FX LISTED ROLL MASTIC COLD TEMPERATURE FOILS UL 181A-P/B-FX LISTED
PC 857 PC 858CA SF 685 AF 914CT AF 975CT AF 100
UL PRINTED COATED CLOTH UL PRINTED COATED CLOTH PRINTED SHURMASTIC® FOIL 1.5-MIL ALUMINUM FOIL 2-MIL ALUMINUM FOIL 2-MIL DEAD-SOFT ALUMINUM FOIL HIGH STRENGTH AND HOLD HIGH STRENGTH AND HOLD FORMS A PERMANENT BOND SUPERIOR STABILITY SUPERIOR STABILITY FLEXIBLE AND EASY TO USE SYNTHETIC RUBBER BLEND ADHESIVE SYNTHETIC RUBBER BLEND ADHESIVE BUTYL RUBBER ADHESIVE ACRYLIC-BASED ADHESIVE ACRYLIC-BASED ADHESIVE ACRYLIC-BASED ADHESIVE CEC APPROVED LINERED LINERED LINERED TRADITIONAL OR EASYPEEL™ LINER
TENSILE (LBS/IN WIDTH) 27 TENSILE (LBS/IN WIDTH) 27 TENSILE (LBS/IN WIDTH) 25 TENSILE (LBS/IN WIDTH) 12 TENSILE (LBS/IN WIDTH) 18 TENSILE (LBS/IN WIDTH) 25 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 70 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 70 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 255 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 64 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 64 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 70 THICKNESS (MILS) 14.0 THICKNESS (MILS) 14.0 THICKNESS (MILS) 17.0 THICKNESS WITHOUT LINER (MILS) 3.4 THICKNESS WITHOUT LINER (MILS) 4.0 THICKNESS WITHOUT LINER (MILS) 4.2 ELONGATION (%) 10 ELONGATION (%) 10 ELONGATION (%) 560 ELONGATION (%) 3 ELONGATION (%) 3 ELONGATION (%) 2 SERVICE TEMPERATURE RANGE (°F) 50 - 212 SERVICE TEMPERATURE RANGE (°F) 50 - 212 SERVICE TEMPERATURE RANGE (°F) -20 - 200 APPLICATION TEMPERATURE RANGE (°F) -20 - 260 APPLICATION TEMPERATURE RANGE (°F) -20 - 260 APPLICATION TEMPERATURE RANGE (°F) -20 - 260 APPLICABLE STANDARDS* 39, 51, 52, 53 APPLICABLE STANDARDS* 39, 51, 52, 53 APPLICABLE STANDARDS* 41, 47, 49, 52 APPLICABLE STANDARDS* 30, 52 APPLICABLE STANDARDS* 30, 52 APPLICABLE STANDARDS* 42, 50, 51, 52, 53
Used in the HVAC industry to seal, seam and join Used in the HVAC industry to seal, seam and join For indoor or outdoor use to seal Class 1 Flex Duct, For joining and sealing aluminum-backed and fibrous For use in temperatures ranging from -20 F to 260 F For airtight joining and sealing joints, connections and Class 1 Flex Duct. Class 1 Flex Duct; Approved for use by the California sheet metal and duct wrap vapor barriers; Also approved insulation and metal ductwork in temperatures ranging when joining and sealing aluminum-backed or fibrous seams on rigid fiberglass duct board and flexible air duct. Energy Commission. for subgrade application on PVC-coated duct; Paintable from -20 F to 260 F; Also used to repair metal and sheet insulation and metal ductwork; Can also be used when with paint recommended for aluminum. metal. repairing metal and sheet metal.
DC 181 SF 686 AF 984CT AF 990CT
UL PRINTED BOPP FILM UL PRINTED SHURMASTIC® FOIL FOIL/SCRIM/KRAFT (FSK) ALL SERVICE JACKET (ASJ) EXCELLENT CONFORMABILITY INSTANT, WATER-RESISTANT GRIP SUPERIOR STABILITY SUPERIOR STABILITY ACRYLIC ADHESIVE BUTYL RUBBER ADHESIVE ACRYLIC-BASED ADHESIVE ACRYLIC-BASED ADHESIVE LINERED LINERED LINERED
TENSILE (LBS/IN WIDTH) 31 TENSILE (LBS/IN WIDTH) 23.8 TENSILE (LBS/IN WIDTH) 34 TENSILE (LBS/IN WIDTH) 50 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 38 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 111 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 64 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 80 THICKNESS (MILS) 2.7 THICKNESS (MILS) 17.0 THICKNESS WITHOUT LINER (MILS) 7.4 THICKNESS WITHOUT LINER (MILS) 8.3 ELONGATION (%) 200 ELONGATION (%) - ELONGATION (%) 3 ELONGATION (%) 6.7 SERVICE TEMPERATURE RANGE (°F) -10 - 210 SERVICE TEMPERATURE RANGE (°F) -20 - 220 APPLICATION TEMPERATURE RANGE (°F) -20 - 260 APPLICATION TEMPERATURE RANGE (°F) -20 - 260 APPLICABLE STANDARDS* 42, 51, 52, 53 APPLICABLE STANDARDS* 47, 49, 51, 52, 53 APPLICABLE STANDARDS* 33, 52 APPLICABLE STANDARDS* 35, 52
For use on Class 1 Flex Duct for connecting, joining, For airtight and moisture-free sealing of Class 1 Flex For sealing seams in scrim-reinforced duct insulation. For use in cold and dual temperature systems to seal, sealing and patching flexible air ductwork. Duct, sheet metal and duct wrap vapor barriers; Also seam and join scrim-reinforced pipe and duct insulation. approved for subgrade application on PVC-coated duct; Paintable with paint recommended for aluminum.
SMOOTH START. FAST FINISH.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 42 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 43
ALUMINUM & PAPER COMPOSITE SPECIALTY TAPES PVC FILM
AF 75 AF 912 HW 300 IT 100 BT 100 EV 57B
3-MIL DEAD-SOFT ALUMINUM FOIL 1.5-MIL DEAD-SOFT ALUMINUM FOIL HOUSEWRAP/SHEATHING GENERAL PURPOSE GRADE GENERAL PURPOSE BARRICADE GENERAL PURPOSE GRADE EXCELLENT ADHESION TO BACKING SOLVENT-FREE HAND-TEARABLE FOAM PIPE WRAP INSULATION 2-IN LETTERS ARE EASY TO READ UL LISTED ELECTRICAL ACRYLIC-BASED ADHESIVE SYNTHETIC RUBBER ADHESIVE WATER-BASED ACRYLIC ADHESIVE ADHERES FIRMLY TO ALL METALS RESISTS SAGGING HIGH TENSILE AND ELONGATION LINERLESS LINERED CCMC-CERTIFIED ACRYLIC-BASED ADHESIVE ADHESIVE-FREE MATTE-FINISH SPVC FILM
TENSILE (LBS/IN WIDTH) 30 TENSILE (LBS/IN WIDTH) 11 TENSILE (LBS/IN WIDTH) 30 TENSILE (LBS/IN WIDTH) (LONGITUDINAL) 6.0 THICKNESS (MILS) 2 - 3 TENSILE (LBS/IN WIDTH) 14 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 55 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 90 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 50 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) - APPLICABLE STANDARDS* - ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 16 THICKNESS (MILS) 4.8 THICKNESS WITHOUT LINER (MILS) 3.8 THICKNESS (MILS) 3.0 THICKNESS WITHOUT LINER (MILS) 118.1 THICKNESS (MILS) 7.0 ELONGATION (%) 5.3 ELONGATION (%) 2 ELONGATION (%) 162 ELONGATION (%) (MACHINE DIRECTION) 126 ELONGATION (%) 200 APPLICATION TEMPERATURE RANGE (°F) -10 - 180 APPLICATION TEMPERATURE RANGE (°F) 32 - 230 APPLICATION TEMPERATURE RANGE (°F) 14 - 176 SERVICE TEMPERATURE RANGE (°F) -20 - 180 SERVICE TEMPERATURE RANGE (°F) 20 - 176 APPLICABLE STANDARDS* 43, 45, 46, 48 APPLICABLE STANDARDS* 34, 52 APPLICABLE STANDARDS* 15, 30, 52 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* 23, 53
For use in broad temperature ranges to create vapor For sealing and joining aluminum-backed duct wrap; Also For sealing seams and joints on all types of housewrap, For hot and cold pipe insulation applications - cover hot For marking restricted areas and managing access to For splicing, insulating and binding wiring harnesses; barriers and waterproof seals; Also used for masking off used for temporary metal repair. sheathing, insulation and vapor barrier materials used in pipes to prevent heat loss and cold pipes to prevent work sites by professionals in the safety, construction, Dielectric at break 1,000 volts/mil. surfaces when painting and electroplating. residential and commercial construction applications. condensation drip; Thermal conductivity is 0.28 at 75 F, utilities, hardware and other industries. in accordance with ASTM C-177.
AF 973 AF 982 LS 300 PW 100 VP 410 VP 415
2-MIL DEAD-SOFT ALUMINUM FOIL FOIL/SCRIM/KRAFT (FSK) UV-RESISTANT LINE SET GENERAL PURPOSE GRADE GENERAL PURPOSE GRADE GENERAL PURPOSE GRADE SOLVENT-FREE SOLVENT-FREE EASY TO UNWIND PVC PIPE WRAP LINE SET WARNING STRIPE SYNTHETIC RUBBER ADHESIVE SYNTHETIC RUBBER ADHESIVE ACRYLIC-BASED ADHESIVE CORROSION/MOISTURE RESISTANT SPVC FILM SPVC FILM LINERED LINERED RUBBER-BASED ADHESIVE
TENSILE (LBS/IN WIDTH) 15 TENSILE (LBS/IN WIDTH) 40 TENSILE (LBS/IN WIDTH) 37 TENSILE (LBS/IN WIDTH) 32 TENSILE (LBS/IN WIDTH) 13 TENSILE (LBS/IN WIDTH) 15 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 90 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 60 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 35 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 20 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 20 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 12 THICKNESS WITHOUT LINER (MILS) 4.4 THICKNESS WITHOUT LINER (MILS) 6.6 THICKNESS (MILS) 2.85 THICKNESS (MILS) 10.0 THICKNESS (MILS) 5.25 THICKNESS (MILS) 6.6 ELONGATION (%) 2 ELONGATION (%) 1 ELONGATION (%) 180 ELONGATION (%) 200 ELONGATION (%) 200 ELONGATION (%) 200 APPLICATION TEMPERATURE RANGE (°F) 32 - 230 APPLICATION TEMPERATURE RANGE (°F) 32 - 230 SERVICE TEMPERATURE RANGE (°F) -35 - 210 APPLICATION TEMPERATURE RANGE (°F) 14 - 176 SERVICE TEMPERATURE RANGE (°F) 20 - 140 SERVICE TEMPERATURE RANGE (°F) 20 - 140 APPLICABLE STANDARDS* 32, 52 APPLICABLE STANDARDS* 36, 52 APPLICABLE STANDARDS* - SERVICE TEMPERATURE RANGE (°F) 32 - 104 APPLICABLE STANDARDS* 19 APPLICABLE STANDARDS* 19 APPLICABLE STANDARDS* - For sealing and joining aluminum-backed duct wrap, For maximum-strength sealing, seaming and joining For taping outdoor HVAC components. creating water and vapor barriers, and for temporary scrim-reinforced pipe and duct insulation in all weather For corrosion protection of underground metal and For floor, lane and aisle marking, color-coding and For lane marking and identification of safety zones metal repair. conditions. plastic pipe installations. identification applications; Also used in the HVAC and hazard areas; Resistant to abrasion, UV light, acid, industry to wrap line sets, seam Rubatex and Armaflex, alkalides, oils, moisture, humidity and corrosion; Meets and insulate air ducts and underground pipes; Meets OSHA color-coding requirements. OSHA color-coding requirements.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 44 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 45
DOUBLE-COATED TAPES
WE KNOW YOU DEMAND VERSATILITY TO GET THE JOB DONE. THAT’S WHY WE HAVE ENGINEERED A COMPREHENSIVE
ASSORTMENT OF DOUBLE-COATED TAPES, INCLUDING PAPER,
FILM, CLOTH AND TRANSFER ADHESIVE OPTIONS. WHETHER
YOU’RE MOUNTING, SPLICING, JOINING OR LAMINATING, THESE
TAPES HAVE ONE THING IN COMMON: AN UNSURPASSED LEVEL OF QUALITY.
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 46 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 47
DOUBLE-COATED PAPER DOUBLE-COATED FILM DOUBLE-COATED CLOTH
DF 63 DF 65 DT 200 DP 401 DF 545
GENERAL PURPOSE GRADE GENERAL PURPOSE GRADE PREMIUM PERFORMANCE GRADE PROFESSIONAL GRADE PREMIUM PERFORMANCE GRADE CREPE PAPER FLAT PAPER SOLVENT-BASED ACRYLIC ADHESIVE POLYESTER (PET) FILM POLYESTER/COTTON BLEND CLOTH RUBBER-BASED ADHESIVE RUBBER-BASED ADHESIVE NONWOVEN TISSUE SYNTHETIC RUBBER ADHESIVE RUBBER-BASED ADHESIVE
TENSILE (LBS/IN WIDTH) 23 TENSILE (LBS/IN WIDTH) 33 TENSILE (LBS/IN WIDTH) 5 TENSILE (LBS/IN WIDTH) 14 TENSILE (LBS/IN WIDTH) 28 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 35 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 66 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 55 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) (LS^) 124 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 45 THICKNESS WITHOUT LINER (MILS) 6.5 THICKNESS WITHOUT LINER (MILS) 5.0 THICKNESS WITHOUT LINER (MILS) 4.5 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) (ES^) 142 THICKNESS WITHOUT LINER (MILS) 13.5 ELONGATION (%) 9 ELONGATION (%) 2.5 ELONGATION (%) 3.5 THICKNESS WITHOUT LINER (MILS) 4.7 ELONGATION (%) 9 SERVICE TEMPERATURE RANGE (°F) 50 - 225 SERVICE TEMPERATURE RANGE (°F) 50 - 225 SERVICE TEMPERATURE RANGE (°F) -20 - 212 ELONGATION (%) 100 SERVICE TEMPERATURE RANGE (°F) 50 - 200 APPLICABLE STANDARDS* 21 APPLICABLE STANDARDS* 22 APPLICABLE STANDARDS* - SERVICE TEMPERATURE RANGE (°F) 32 - 150 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* - For mounting, holding, splicing, tabbing and fastening a For mounting, holding, splicing, tabbing and fastening For high-speed splicing in the corrugated cardboard For securing carpet and pad at convention centers, variety of substrates. applications that demand aggressive adhesion. production process in temperatures up to 400 F; Can For polyethylene (PE) foam fabrication and lamination arenas and hotels; Also used for general purpose also be used as a mounting and laminating system for processes. Ideal for packaging applications that require hanging applications in the construction and abatement irregularly shaped metals, foams, foils and nameplates; cushioning, protection or stabilization of contents; Can industries; Can also be used for splicing applications. also be used with die-cuts, gaskets, POP merchandising For manual applications. and shelf displays.
^LS=LINER SIDE; ^ES=EXPOSED SIDE
DS 154 GG 200 DP 380 DP 391 DF 642
PROFESSIONAL GRADE CONTAINMENT GOLF GRIP GENERAL PURPOSE GRADE PROFESSIONAL GRADE INDUSTRIAL GRADE EXCELLENT HOLD RUBBER-BASED ADHESIVE POLYESTER (PET) FILM POLYESTER (PET) FILM POLYESTER/COTTON BLEND CLOTH FINE STRUCTURED CREPE (FSC) CREPE PAPER SOLVENT-BASED ACRYLIC ADHESIVE SYNTHETIC RUBBER ADHESIVE SYNTHETIC RUBBER ADHESIVE SYNTHETIC RUBBER ADHESIVE
TENSILE (LBS/IN WIDTH) 21 TENSILE (LBS/IN WIDTH) 23 TENSILE (LBS/IN WIDTH) 15.5 TENSILE (LBS/IN WIDTH) 23 TENSILE (LBS/IN WIDTH) 32 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) (LS^) 60 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 50 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 60 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 82 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 32 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) (ES^) 27 THICKNESS WITHOUT LINER (MILS) 6.5 THICKNESS WITHOUT LINER (MILS) 4.4 THICKNESS WITHOUT LINER (MILS) 3.7 THICKNESS WITHOUT LINER (MILS) 12.0 THICKNESS WITHOUT LINER (MILS) 8.5 ELONGATION (%) 10 ELONGATION (%) 110 ELONGATION (%) 100 ELONGATION (%) 8 ELONGATION (%) 9 SERVICE TEMPERATURE RANGE (°F) 50 - 150 SERVICE TEMPERATURE RANGE (°F) -20 - 257 SERVICE TEMPERATURE RANGE (°F) 32 - 230 SERVICE TEMPERATURE RANGE (°F) 50 - 225 SERVICE TEMPERATURE RANGE (°F) 32 - 120 APPLICABLE STANDARDS* - APPLICABLE STANDARDS* - APPLICABLE STANDARDS* - APPLICABLE STANDARDS* - APPLICABLE STANDARDS* - For factory and clubhouse golf grip installation; Can also For mounting banners, light signs, window blinds, For mounting, bonding and fastening a wide variety of For carpet and pad installation at convention centers, For holding poly-sheeting and other protective materials be used for mounting, holding, splicing, tabbing and emblems and nameplates; Also used for long-term substrates, including low surface energy plastics and arenas and hotels; Used for general purpose holding and when creating high-performance containment systems; fastening a variety of substrates when an aggressive, or permanent bonding and attachment applications, coatings; Used for trim, profile and extrusion mounting; mounting applications; Can also be used to hold signs Can be used in non-direct UV exposure applications, such Use for restoration, abatement and remodeling tasks double-sided tape is required. including POP displays and laminating materials. and dispensers for POP merchandising. as vinyl and painted window frames, that demand clean such as painting, cleaning, sanding, mold remediation, removal; Also used for mounting indoor window kits. asbestos removal and more. 21
^LS=LINER SIDE; ^ES=EXPOSED SIDE
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-DOUBLE-COATEDCOATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 48 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE INNOVATIONSSHURTAPE.COM | 1.888.442.TAPE 49 TRANSFER ADHESIVE DISPENSER New or reinvented products that stay TRUE TO YOUR WORK
TA 450 TG 356 SD 950 AF 100 with EasyPEEL PC 460 UL 181A-P/B-FX LISTED TAPE SHURGRIP® CO-EXTRUDED DUCT TAPE
GENERAL PURPOSE GRADE PREMIUM PERFORMANCE GRADE ADHESIVE TRANSFER GUN RESISTS HUMIDITY, MOST SOLVENTS RESISTS HUMIDITY, MOST SOLVENTS PISTOL-GRIP ACRYLIC-BASED ADHESIVE ACRYLIC-BASED ADHESIVE EASY TO LOAD Page 41 Page 29 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 25 ADHESION TO STAINLESS STEEL (OZ/IN WIDTH) 32 For use with reverse wound adhesive transfer tape THICKNESS WITHOUT LINER (MILS) 1.6 THICKNESS WITHOUT LINER (MILS) 2.0 to quickly and easily make almost any surface self- SERVICE TEMPERATURE RANGE (°F) -22 - 302 SERVICE TEMPERATURE RANGE (°F) -60 - 250 adhesive; For mounting, holding, joining and splicing APPLICABLE STANDARDS* - APPLICABLE STANDARDS* - paper, cardboard, plastics, wood, leather, glass and painted surfaces; Can also be used when gift wrapping; T-REX® PC 589 For mounting, holding, joining and splicing various For mounting, holding, joining and splicing various For use with 0.75 in maximum width rolls. substrates, including paper, cardboard, textiles, plastics, substrates, including paper, cardboard, textiles, plastics, SUPER PERFORMANCE TAPE SHURGRIP® CO-EXTRUDED DUCT TAPE leather, wood, glass and painted surfaces; For use on leather, wood, glass and painted surfaces; For use on displays, POS, posters, etc.; Use with an adhesive RECOMMENDED PRODUCTS displays, POS, posters, etc. transfer gun to make almost any surface self-adhesive. TG 356 Reverse wound on a 1-in I.D. core.
Page 32 Page 29
DS 154 PC 593 DOUBLE-COATED PAPER TAPE SHURGRIP® CO-EXTRUDED DUCT TAPE
Page 46 Page 29
FP 115 PC 599 FLATBACK PAPER TAPE SHURGRIP® CO-EXTRUDED DUCT TAPE
Page 9 Page 29
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-DOUBLE-COATEDCOATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 50 SHURTAPE.COM | 1.888.442.TAPE SHURTAPE.COM | 1.888.442.TAPE 51 APPLICABLE STANDARDS PRODUCT INDEX 1 AMS-T-21595 19 CID A-A-1689B, Type I, Class 2 37 FSI 15/SDI 20 AF 75 42 CP 400 7 FrogTape® 4 P- 68 34 PC 626 30 SD 936 22 AF 100 41 CP 450 7 GG 200 46 P- 628 34 PC 629 31 SD 937 23 2 ANSI No. 45.2.2 20 CID A-A-1689B, Type II 38 FSI 15/SDI 25 AF 912 42 CP 500 7 GP 100 20 P- 660 34 PC 657® 32 SD 950 48 3 ASME NQA-1 21 CID A-A-180C, Type II, Grade A 39 FSI 15/SDI 30 AF 914CT 41 CP 631 8 GS 490 19 P- 661 34 PC 658 32 SD 955 23 AF 973 42 CP 650 7 GS 496 14 P- 665® 35 PC 667 36 SD 999 22 4 ASTM D 1974-98 (2003) 22 CID A-A-180C, Type II, Grade B 40 FSI 15/SDI 40 AF 975CT 41 CP 743 6 GS 500 19 P- 670 35 PC 668 36 SF 682 31 5 ASTM D-4236 23 CID A-A-55809 41 FSI 20/SDI 40 AF 982 42 CP 905 7 GS 501 19 P- 672® 34 PC 721 32 SF 683 31 AF 984CT 41 CT 109 17 GS 521 19 P- 691® 34 PC 857 40 SF 685 40 6 ASTM D 5330, Type II 24 FDA Indirect Contact CFR 21, 174.5 42 FSI 25/SDI 50 AF 990CT 41 DC 181 40 GS 531 19 PC 460 29 PC 858CA 40 SF 686 40 7 ASTM D 5486M-12, Type I, Class 2 25 FDA Indirect Contact CFR 21, 175.105 43 L-T-80B AP 15 17 DF 63 46 HP 100® 12 PC 567 36 PE 100 6 SP 222 23 AP 101® 15 DF 65 46 HP 132® 13 PC 589 29 PE 333 37 SP 7000 25 8 ASTM D 5486M-12, Type II, Class 2 26 FDA Indirect Contact CFR 21, 176.170 44 MIL-STD-2041D AP 180® 15 DF 545 47 HP 200® 12 PC 590 28 PE 444 37 SP 8000 25 9 ASTM D 5486M-12, Type III 27 FDA Indirect Contact CFR 21, 176.180 45 MIL-T-23397C AP 201® 15 DF 642 47 HP 232® 13 PC 593 29 PE 555 37 T-REX® 32 AP 301® 15 DP 380 47 HP 235 13 PC 595 28 PP 802 16 TA 450 48 10 ASTM D 5486M-12, Type IV 28 FDA Indirect Contact CFR 21, 177.1520 46 NRC Guide 1.38 AP 401® 15 DP 391 47 HP 240 14 PC 599 29 PP 803 16 TG 356 48 11 ASTM D 5486M-12, Type V 29 FDA Indirect Contact CFR 21, 177.1630 47 Pressure Classes SMACNA 1/2, 1, 2, 3, 4 & 6 BT 100 43 DP 401 47 HP 250 14 PC 600C 30 PP 807 17 VF 719 17 CF 740 7 DS 154 46 HP 260 14 PC 600S 28 PP 808 17 VP 410 43 12 ASTM D 6123/D 6123M-97 (2012), Type I 30 FSI 0/SDI 0 48 SAE-AMS-T-23397 COLONIAL® 5 DT 200 46 HP 300® 12 PC 609 31 PP 810 16 VP 415 43 13 ASTM D 6123/D 6123M-97 (2012), Type II 31 FSI 0/SDI 5 49 Seal Classes A, B, C CP 27® 4 EM 101 4 HP 400® 12 PC 610 31 PP 815 16 WP 100 20 CP 60® 4 EV 57B 43 HP 460 14 PC 618C 30 PS 748 18 WP 200 20 14 ASTM E 2072 32 FSI 0/SDI 10 50 UL 181A-P CP 66® 5 FP 17 8 HP 500® 12 PC 618S 28 PS 750 18 WP 300 20 15 CCMC Report No.: 13401-R 33 FSI 5/SDI 0 51 UL 181B-FX CP 83 6 FP 96 9 HP 560 14 PC 619 30 PW 100 43 WP 400 20 CP 101 6 FP 97 9 HP 800 12 PC 621 32 SD 930 22 16 CID A-A-113D, Type I, Class A 34 FSI 5/SDI 5 52 UL 723 CP 102 5 FP 115 9 HW 300 42 PC 622 36 SD 931 23 17 CID A-A-1586A 35 FSI 5/SDI 10 53 UL Listed CP 105 6 FP 202 9 IT 100 43 PC 623 33 SD 932 22 CP 107 5 FP 227 8 JLAR 16 PC 624 33 SD 934 22 18 CID A-A-1684C 36 FSI 10/SDI 10 CP 150 4 FP 726 8 LS 300 42 PC 625 33 SD 935 22
LOCATIONS WARRANTY INFORMATION
U.S. CORPORATE HEADQUARTERS UNITED KINGDOM UNITED STATES DISTRIBUTION CENTERS Shurtape Technologies, LLC, guarantees its products to be in compliance Shurtape Technologies, LLC Shurtape UK Ltd. North Carolina with acceptable standards for material and workmanship, but limits its 1712 8th Street Drive SE 39 Mark Road 3389 Catawba Industrial Place Hickory, NC 28602 USA Hemel Hempstead Catawba, NC 28609 USA obligation under this warranty to replacement or, at its option, reimbursement Phone: (828) 322-2700 Hertfordshire, HP2 7DN UK Phone: (828) 322-2700 of the purchase price of returned merchandise shown to its satisfaction (888) 442-8273 Phone: +44 (0)1442 275312 (888) 442-8273 to have been defective by such standards at the time it was shipped by Fax: (828) 322-4029 Fax: +44 (0)1442 275301 Email: [email protected] Email: [email protected] Arizona Shurtape Technologies, LLC. Shurtape Technologies, LLC, neither makes nor Website: www.shurtape.com Website: www.shurtape.co.uk First Commerce Center authorizes, nor shall be bound to any other warranty of merchantability, and 725 N 73rd Avenue, Suite 112 under no circumstances will it be liable for any loss, damage, expense or SHURTECH BRANDS, LLC EUROPE Phoenix, AZ 85043 USA 32150 Just Imagine Drive Kip GmbH Phone: (623) 463-5886 consequential damage or loss of any kind either in tort or contract, arising Avon, OH 44011 USA Schlavenhorst 9 (Industriepark) (800) 342-8273 directly or indirectly out of or in connection with the use of or inability to use Phone: (440) 937-7000 D-46395 Bocholt, Germany Fax: (623) 463-5809 its products. (800) 321-1733 Phone: +49 2871-23466-2327 Fax: (440) 937-7077 Fax: +49 2871-23466-2332 Oklahoma Email: [email protected] 4800 Partnership Drive Product literature, specifications, product and test reports, and other Website: www.kip-tape.com Oklahoma City, OK 73131 descriptive and advertising material and information are based on research Phone: (405) 475-0202 testing and are believed to be reliable but constitute no part of this warranty, MEXICO MIDDLE EAST Fax: (405) 475-0211 Shurtape México, S. de R.L. de C.V. Shurtape Ved Ltd. which is exclusively and strictly limited to the foregoing. Shurtape products Paseo de la Constitución #11 Jebel Ali Free Zone, Ontario, Canada are sold on the understanding that the buyer has determined or will Fracc. Ind. Peñuelas Dubai, United Arab Emirates 6685 Kennedy Rd. Suite 3 determine the suitability of the product for buyer’s purposes, and is reminded CP 76148, Queretaro, Qro. México Phone: +971 (4) 881-3155 Mississauga, ON Phone: +52 (442) 220-6367 Fax: +971 (4) 881-3166 Canada L5T 3A5 that some materials are sensitive to adhesive-based products and discretion Fax: +52 (442) 220-6366 Fax: +971 (4) 883-1974 Phone: (905) 696-0800 should be used in their application. Email: [email protected] Email: [email protected] Fax: (905) 696-8176
SOUTH AMERICA ASIA No agent or representative is authorized to give any guarantee or make any Shurtape Perú S.A. Shurtape Technologies (Changshu) Co. Ltd. statement contrary to or inconsistent with this warranty. Calle Minería 141 Changshu Southeast Economic Santa Anita, Lima 43 Development Zone All trademarks listed are the property of Shurtape Technologies, LLC, unless otherwise noted. Perú No.301 Yintong Road Phone: +51 (1) 416-3400 Jiangsu, China 215500 Fax: +51 (1) 383-0476 Phone: +86 (512) 5235-9500 Email: [email protected] Fax: +86 (512) 5235-9528 Website: www.shurtapeperu.com Email: [email protected]
MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOIL & FILM TAPES DOUBLE-COATED TAPES * SEE PAGE 50 FOR APPLICABLE STANDARDS 52 SHURTAPE.COM | 1.888.442.TAPE
Shurtape Technologies, LLC P. O. Box 1530 Hickory, NC 28603-1530 USA
Shurtape.com 1.888.442.TAPE [email protected]
ISO 9001-CERTIFIED QUALITY SYSTEM
©2016 Shurtape Technologies, LLC Form #CAT-COMP-07/2016 MASKING & PAPER TAPES PACKAGING SOLUTIONS CLOTH & DUCT TAPES FOILPrinted & FILMin USA TAPES on Recycled Paper. DOUBLE-COATED TAPES