®
Co. Inc. Established 1852
ISO 9001 Certified
Additional Stimpson Catalogs
Catalog 110-S Catalog 100-A Catalog 43
World’s Largest Producer of Eyelets World’s Largest Producer of Grommets & Washers World’s Largest Producer of Hole Plugs
1515 SW 13th Court • Pompano Beach, FL 33069 • 877.765.0748 • Fax: 954.545.7440 Eyelets • Grommets and Washers • Hole Plugs • CE® Rivets • Snap Fasteners • Clamps • Ferrules Email: [email protected] • Web: www.stimpson.com Arrows • Shells • Vents • Corners • Attaching Machines Line Of Attaching Machines
Modell 92GW Grommet Machiine
The Model 92GW is a dual feed, heavy duty grommeting machine. It offers the attractive advantage of being able to make settings in heavy duty industrial fabrics (including kevlar and nylon) by punching out the hole and then attaching the grommet & washer in a single cycle. In addition, a material thickness compensator allows materials with thickness difference of up to 1/8” to be set without a setting tool adjustment. Available for grommet & washer sizes #0 to #4 inclusive.
Modell 2KGW Grommet Machiine
State-of-the-art, fully automatic, grommet machine. This machine is built around a newly designed frame that requires less space and is much lighter than previous generations of machines. The 2KGW is a fully automatic machine that feeds both the grommet and washer, punches the hole in the material and attaches the grommet and washer, all in a single cycle. Flywheel powered and cam actuated to ensure consistent settings. It offers advanced cutting and material thickness compensation technology. The 2KGW has been specifically engineered for light to medium duty applications. Available for grommet and washer sizes #00 to #2.
Featured are just some of the many industries and products that utilize the metal fasteners that Stimpson offers. Modell 4KGW Grommet Machiine
Established in 1852, The Stimpson legacy is based on quality products The most advanced grommet machine in Edward Segal’s product line, the 4KGW uses pneumatic force and innovative supported by friendly, knowledgeable customer service. toggle linkage to cut through multiple layers of the toughest fabrics. The 4KGW has fewer moving parts than mechanical grommet machines, simplifying maintenance requirements. PLC based controls provide for optimal machine flexibility, and a pressure setting switch compensates for variances in material thickness. Fully automatic, dual feed, the 4KGW is As you see the possibilities are almost endless...and for this, available for Stimpson grommet and washer sizes #0 to #4. WE THANK YOU, our Customer.
Modell 83 Eyellet Machiine
Model 83, 83LT and 2R83 are bench model, automatic feed, eyelet attaching machines specifically designed to make single or multiple high speed eyelet settings in most light to moderate weight fabrics. The base Model 83 machine is used for single or multiple eyelet settings where materials are prepunched or where the eyelet cuts its own hole. Model 2R83 is similar to the base Model 83 machine, but includes the double revolution feature to punch holes in your material. Model 83LT is designed to set small eyelets using the Limited Travel feature.
Modell SF2 Snap Fastener Machiine
The Model SF2 is a fully automatic snap fastener machine tooled for standard industrial snap fastener components. This machine is offered for customers looking for an affordable, reliable solution for snap fastener applications. The Model SF2 is a flywheel powered machine and features rotary hoppers, a target light for locating the snap position on the material, and a mechanical clutch with a non-repeat mechanism to ensure long-term safe operation.
18 ® Offers The Edward Segal Additional Stimpson Catalogs Product Index Eyelets Snap Fasteners Co. Inc. An Introduction ...... 7-8 Ring Snaps ...... 12 Model 3P5 Grommet Machine Apparel ...... 11 Envelope ...... 11 Washers Model 3P5 is a portable pneumatic press specifically designed for grommet applications. At only 22 pounds, 17” GS® ...... 9 Apparel ...... 11 tall, 4” wide, and 11” deep, this powerful compact press is capable of punching a hole in a wide range of industrial Catalog 110-S Industrial ...... 15 fabrics and attaching Stimpson grommets and washers (sizes #00 - #4), all in a single cycle. All of the setting tools Polybag ...... 11 are interchangeable, and are simply threaded in place, allowing for fast conversions between grommet sizes. This Shoe ...... 10 Neck ...... 3-4 machine is built on a sturdy welded frame and designed for safe operation, portability, and ease of use. Tag ...... 11 Oblong ...... 6 Sheet Metal ...... 3-4 Grommets Spur ...... 5 Oblong ...... 6 Teeth ...... 3-4 Rolled Rim ...... 5 Vent ...... 15 Model 3P5-X Grommet Machine Self-Piercing ...... 6 Model 3P5-X is a portable pneumatic press specifically designed for applications that require grommets that are larger Sheet Metal ...... 3-4 Additional Categories than #4. The X is the larger, more robust version of the standard 3P5. This unit weighs 45 pounds, and measures Arrows and Spinners ...... 15 17-1/2” tall, 4-1/2” wide and 14” deep. Even though the 3P5-X is specifically designed for the larger grommets, Hole Plugs Clamps ...... 15 it comes with an adapter set to run the standard 3P5 tools for smaller grommets (sizes #0 - #4). This machine is built on a sturdy welded frame and designed for safe operation, portability and ease of use. All of the setting tools are World’s Largest Producer of Eyelets Electrical Knockout ...... 14 Corners ...... 15 interchangeable, and are simply threaded in place to facilitate fast conversions between grommet sizes. Special ...... 14 Ferrules and Shells ...... 15 Standard ...... 13 Government Contracts ...... 15 Tubing ...... 14 Machinery ...... 16-18 Vents ...... 15 Rivets Model 83 Grommet Machine ® Catalog 100-A CE ...... 12 Models G83 and G2R83 are bench model grommet machines employing a single automatic feed of the grommet, and a hand feed of the washer. Model G83 is suitable for grommet applications where the holes are prepunched. Model G2R83 includes the double revolution feature to punch a hole in the material and then feed and set the grommet. For plain grommet sizes #00 - #5.
Model 83GW Grommet Machine
A dual feed, heavy duty grommet machine which pierces your material while it automatically feeds and sets both the grommet and the washer all with one tripping of the electric foot switch. The 83GW is especially suited for lighter materials as it pierces a hole versus punching a clean hole. With the pierce, the extra material folds back World’s Largest Producer of Grommets & Washers and provides a larger foundation to set the grommet and washer against. Available for rolled rim grommet sizes #0 to #4 with matching spur washer, and plain grommet and matching neck or teeth washer, sizes #00 to #4.
Catalog 43 Model 92 Grommet Machine
The Model 92 Series of grommet machines has been designed for more challenging applications such as heavy duty industrial fabrics or setting larger grommets. They offer upgraded power by using a stronger motor and larger flywheel. All Model 92 machines are semi-automatic which means the grommet is automatically fed but the washer, if needed, is manually placed on the lower die. The Model G2R92 version includes the double revolution feature to punch a hole in the material and then feed and set the grommet. It can accommodate all standard grommet sizes to a maximum of #5 rolled rim. 1515 SW 13th Court, Pompano Beach, FL 33069 Toll Free: 877.765.0748 • Phone: 954.946.3500 • Fax: 954.545.7440 Email: [email protected] • Web: www.stimpson.com Please visit www.stimpson.com for additional information World’s Largest Producer of Hole Plugs ISO 9001 Certified and specifications. RoHs • REACH • DFARS Compliant Copyright 2012 by Stimpson Co., Inc.
17 2 ® Sheet Metal Grommets Stimpson Attaching Machines Co. Inc. Quality fasteners need to be supported by quality tooling and attaching machines. Whether your requirements are for a hand operated bench machine, or a fully automatic dual feed grommeting machine, Stimpson makes Sheet Metal Grommets - can be used interchangeably with plain, teeth or neck washers. available to you the finest quality products in the marketplace...ensuring that your investment in new tooling or a #00G #0G #1G #1JG #2G new machine will be a wise one. FLG Hole Size 3/16’’ Hole Size 1/4’’ Hole Size 9/32’’ Hole Size 9/32’’ Hole Size 3/8’’ The following is intended to be a brief introduction of machinery offered by Stimpson Company, and therefore not all LUF models or variations are shown. For more information regarding Stimpson attaching machines and tooling, please ask to speak to one of our FLG LUF MT FLG LUF MT FLG LUF MT FLG LUF MT FLG LUF MT .425 .135 .009 .545 .175 .012 .687 .185 .012 .680 .263 .0126 .815 .215 .013 Machinery Customer Service Consultants, who will be happy to assist you. Additional information is also available on our website at www.stimpson.com. Note: Safety devices as required are provided with your machine. Safety guards or other operational safety basic reinforcement, providing support for the grommet setting. devices provided should never be removed, disabled or over-ridden during operation since they are designed Plain Washers - to reduce the potential of injury to the operator. O D #00W #0W #1W #1W #2W *Photographs may vary from actual machines due to minor design changes.
Model 479 I D ID OD MT ID OD MT ID OD MT ID OD MT ID OD MT Model 479 is a hand feed machine, ideal .218 .460 .009 .289 .546 .010 .359 .700 .012 .359 .700 .012 .453 .835 .012 Hand Drive where production is limited. It is available Used with a wooden or rawhide in either foot, pneumatic or electric power mallet, Stimpson Hand Drive Tools formats. Teeth Washers - a firmer, tighter grasp, particularly in woven materials. can be used to set most Stimpson products.
O D #0TW #1TW #1TW #2TW
Model 479 Foot Power
I D ID OD MT ID OD MT ID OD MT ID OD MT Height 45” .290 .570 .0115 .350 .680 .014 .350 .680 .014 .468 .840 .012 Weight 113 lbs. Throat Depth 4” Stroke 1-3/8” Neck Washers - telescoping, barrel to barrel setting, reinforces the hole with two entire parts. Floor Space 14” x 20”
#00NW* #0NW* #1NW* #1NW* #2NW* LUF
FLG
FLG LUF MT FLG LUF MT FLG LUF MT FLG LUF MT FLG LUF MT 405 Bench Press .425 .125 .010 .531 .100 .010 .705 .105 .010 .705 .105 .010 .840 .095 .013 Low cost and versatile, the 405 *Indicates scored washers. bench press is ideal for smaller projects or prototype work. It is especially well suited for setting Stimpson Self-Piercing ® Telescoping Eyelets with Neck Washers Grommets & Washers in most The eyelet alternative in a telescoping setting. Additional sizes are available. lightweight fabrics. Made with Co. Inc. a heavy duty aluminum frame. A1445/#00NW* A1181/#0NW* A1998/#0NW* A1333/A1334 FLG ISO 9001 Certified Hole Size .177 Hole Size .273 Hole Size .270 Hole Size .274 LUF Height 12” 1515 SW 13th Court LUF Weight 10 lbs. Pompano Beach, FL 33069 FLG Throat Depth 2-3/4” (877) 765-0748 • Fax: (954) 545-7440 Stroke 1-3/4” Web Site: www.stimpson.com Bench Space 3-1/2” x 9” FLG .403/.425 FLG .535/.531 FLG .540/.531 FLG .545/.562 E-Mail: [email protected] LUF .210/.125 LUF .155/.100 LUF .120/.100 LUF .145/.080 MT .0135/.010 MT .010/.010 MT .016/.010 MT .013/.009 *Indicates scored washers. 3 16 Additional Products with Plain, Teeth and Neck Washers
Clamps, Vents, Ferrules, Shells, Washers, Corners, Arrows and Spinners are additional products manufactured by Stimpson Grommets and Washers are made from brass, aluminum and zinc, and are available in base Stimpson Company. metal or with popular finishes such as nickel or dull black chemical. Many sizes available in stainless steel.
Clamps Vents Ferrules and Shells #2JG #3G #4G #5G #6G Hole Size 3/8’’ Hole Size 7/16’’’ Hole Size 1/2’’ Hole Size 5/8’’’ Hole Size 13/16’’
Stimpson manufactures a wide variety Stimpson's wide selection of vents and Stimpson ferrules are made in a variety FLG LUF MT FLG LUF MT FLG LUF MT FLG LUF MT FLG LUF MT .840 .260 .016 .970 .295 .014 1.050 .374 .016 1.220 .330 .016 1.750 .232 .020 of clamps, which can be made with a matching washers are most often used of configurations: straight or tapered, single or double "u" shape, with or for air circulation or drainage in products with or without a shoulder, closed ended without teeth, or with lancings to such as mattresses, rain gear, boots and with virtually any shape hole. improve pull and grip strengths. and hats. #2W #3W #4W #5W #6W
Washers Corners Arrows and Spinners
ID OD MT ID OD MT ID OD MT ID OD MT .453 .835 .0126 .530 .955 .013 .585 1.062 .013 .740 1.205 .014 ID OD MT .875 1.828 .020
A large range of round, square, oblong Stimpson corners are commonly found Whether the application is a board PACKAGING: Normally Grommets and Washers #5TW are shipped in bulk, however they may also be and screw washers is available from on leather and vinyl binders, personal game, teaching aid, advertising novelty #2JTW #3TW #4TW packed in 1, 5 or 10 gross boxes at additional cost. Stimpson, in addition to those sold with day books, portfolios, luggage, photo or instrument gauge, Stimpson's arrows Self-Piercing Grommets and Washers are packed 500 our grommets, eyelets and vents. albums, and menu covers. and spinners will meet your requirements. pieces to a box at no additional cost. AVAILABILITY: Stimpson maintains the largest ID OD MT ID OD MT ID OD MT ID OD MT inventory of Grommets and Washers in the industry. .468 .840 .016 .545 .945 .013 .593 1.050 .016 .720 1.190 .017 In most cases, even orders calling for popular finishes Government Contracts will be in stock. GOVERNMENT CONTRACTS: Stimpson Grommets and Washers conform to U.S. Military Approved, and in many cases, specified...Stimpson Grommets and Washers, Eyelets, Snap Fasteners, and specifications and may be ordered by Military Type Vents are manufactured in the United States of America and meet with the latest Military and Commercial #2JNW* #3NW* #4NW* and Class Numbers.
Specifications. Stimpson Cage Code #57771. Displayed are some of our most requested items. All dimensions are in inches. Photos approximate actual size. Hole size is approximate measurement after setting.
ID= Inside Diameter, OD = Outside Diameter, FLG LUF MT FLG LUF MT FLG LUF MT FLG = Flange Diameter, LUF = Length Under Flange, .840 .095 .013 .945 .125 .014 1.050 .125 .015 MT= Metal Thickness
Military Specified Finishes MIL-G-16491 NASM16491 MIL-E-20652 “Swatch Book” Eyelet and Washer
The flat design of both A3717 / C317 ® the Eyelet and the Washer MS 20230 MIL-F-10884 MS 27980/81 Mail Bag Grommet & Washer make these parts ideal for use with fabric Co. Inc. samples, sample books and display racks. ISO 9001 Certified
Eyelet Dimensions
OD FLG LUF MT 1515 SW 13th Court, Pompano Beach, FL 33069 Boot Vent & Washer Hat Vent & Washer .516/.497” .875 .140” .010” (877) 765-0748 • Fax: (954) 545-7440 Washer Dimensions Web Site: www.stimpson.com • E-Mail: [email protected] ISO 9001 Certified • RoHs • REACH • DFARS • Berry Amendment Compliant ID OD MT .580” .875” .013”
15 4 Rolled Rim Grommets with Spur Washers Tubing Hole Plugs D4167 D4410 Stimpson Rolled Rim Grommets and Spur Washers are available in brass and zinc, with some sizes also offered in HEAD D4149 DIA. Tube Ins Dia Tube Out Dia Tube Ins Dia Tube Out Dia Tube Ins Dia Tube Out Dia stainless steel. These parts interlock, their teeth grasping the material, to provide a rugged, unyielding setting. Offered in popular 1/4 to 9/32 25/64 3/8 17/32 29/64 17/32 finishes such as nickel and dull black chemical. LENGTH OVERALL HEAD HEIGHT
Head Dia Head Ht L Overall Head Dia Head Ht L Overall Head Dia Head Ht L Overall #0RRG HOLE - 9/32” #0LRRG HOLE - 9/32” #0XLRRG HOLE - 9/32” #1RRG HOLE - 13/32” 25/64 3/32 9/16 17/32 1/16 25/64 17/32 5/64 25/64 FLG - .670 LUF - .175 MT - .016 FLG - .670 LUF - .240 MT - .016 FLG - .670 LUF - .300 MT - .016 FLG - .790 LUF - .205 MT - .016 D3031 D5608 Tube Ins Dia Tube Out Dia Tube Ins Dia Tube Out Dia 1-13/32 Square 7/8 1
#0SW #0SW #0SW #1SW ID - .345 OD - .645 MT - .016 ID - .345 OD - .645 MT - .016 ID - .345 OD - .645 MT - .016 ID - .455 OD - .790 MT - .016
Head Dia Head Ht L Overall Head Dia Head Ht L Overall 63/64 7/32 3/4 1-9/16 sq 9/64 9/16
#2RRG HOLE - 7/16” #2XLRRG HOLE - 7/16” #3RRG HOLE - 15/32” #4RRG HOLE - 9/16” FLG - .890 LUF - .255 MT - .018 FLG - .890 LUF - .348 MT - .018 FLG - .970 LUF - .255 MT - .020 FLG - 1.120 LUF - .320 MT - .020 Electrical Knockout Plugs
D3683 D3720 D3833 Elect KO Size 1/2 Elect KO Size 3/4 Elect KO Size 1 HEAD DIA.
#2SW #2SW #3SW #4SW ID - .512 OD - .890 MT - .018 ID - .512 OD - .890 MT - .018 ID - .537 OD - .970 MT - .020 ID - .645 OD - 1.120 MT - .020 HEAD THICKNESS LENGTH OVERALL Head Dia Head Thk L Overall Head Dia Head Thk L Overall Head Dia Head Thk L Overall 1-5/64 1/16 23/64 1-1/4 1/16 5/16 1-1/2 5/64 11/32
D3916 D3924 D4455 Elect KO Size 1-1/4 Elect KO Size 1-1/2 Elect KO Size 2
Head Dia Head Thk L Overall Head Dia Head Thk L Overall 2-7/32 5/64 23/64 2-11/16 5/64 3/8 #5RRG HOLE - 5/8” #6RRG HOLE - 3/4” #7RRG HOLE - 29/32” #8RRG HOLE - 1-3/32” FLG - 1.285 LUF - .380 MT - .021 FLG - 1.535 LUF - .420 MT - .025 FLG - 1.725 LUF - .446 MT - .020 FLG - 1.865 LUF - .465 MT - .025
Head Dia Head Thk L Overall 1-13/16 1/16 5/16 Stimpson Special Hole Plugs
D4110 D4603 D4298 D5590 D5617 Special Character Hole Dia Special Character Hole Dia Special Character Hole Dia Special Character Hole Dia Special Character Hole Dia #5SW #6SW #7SW #8SW Turned in Legs 1/2 Prong Variation 3/4 Hole in Head 9/16 Extruded Head 5/8 Mesh Top 5/8 ID - .777 OD - 1.270 MT - .021 ID - .875 OD - 1.505 MT - .025 ID - 1.062 OD - 1.725 MT - .020 ID - 1.195 OD - 1.910 MT - .020
FLG Thk of Wk Head Dia & Ht L Overall Thk of Wk Head Dia & Ht L Overall Thk of Wk Head Dia & Ht L Overall Thk of Wk Head Dia & Ht L Overall Thk of Wk Head Dia & Ht L Overall 1/32 to 1/16 21/32 - 5/64 7/32 1/16 to 3/32 59/64 - 5/64 19/64 1/32 to 3/32 23/32 - 1/16 9/32 1/32 13/16 - 7/64 11/32 .015 to .020 13/16 - 3/64 15/64
LUF D5655 D5660 Special Character Hole Dia Special Character Hole Dia Sq/Pointed Prongs 0.92 sq Rect/Reverse Legs 1-5/32-13/32
® I D D5282 HOLE - 1-1/2” D5274 ID - 1.560 OD - 2.360 MT - .020 O D FLG - 2.390 LUF - .355 MT - .020 Thk of Wk Head Dia & Ht L Overall Thk of Wk Head Dia & Ht L Overall Co. Inc. 0.093 sq 1-5/64 - 1/16 23/64 Tubing 1-1/4 - 1/2 rect 11/32 -3/32 5 14 FLG
Hole Plugs Self-Piercing Grommets & Washers LUF Stimpson Self-Piercing Grommets and Washers are available in brass, can be furnished with a nickel LUF We’ve chosen some of our most popular Hole Plugs for display on these pages. However, if you can’t find one to fit or dull black chemical finish and can be used with Stimpson's "no hole needed" tooling or with the I D your requirements, don’t be concerned for we have over 300 additional Hole Plugs to choose from. In addition, new existing self-piercing tooling widely available in the marketplace. O D Hole Plugs are continually being developed to meet our customers’ special applications. Most of our Hole Plugs can be made from brass, steel and #1050 carbon steel, as your need requires. Other metals, Self-Piercing Grommets Self-Piercing Washers Self-Piercing Grommets Self-Piercing Washers such as stainless steel, are available for special situations. With minor tooling modifications most parts can be furnished stamped with your logo, with a different hole size in head, or with one or more prongs removed.
#0SPG HOLE - 1/4” #0SPW #2SPG HOLE - 3/8” #2SPW FLG - .550 LUF - .165 MT - .015 ID - .337 OD - .575 MT - .011 Standard Hole Plugs FLG - .750 LUF - .200 MT - .015 ID - .437 OD - .770 MT - .011
HEAD DIA D3159 D2707 D2587 D2666 D2730 #1SPG HOLE - 5/16” #1SPW Hole Dia Thk of Work Hole Dia Thk of Work Hole Dia Thk of Work Hole Dia Thk of Work Hole Dia Thk of Work FLG - .630 LUF - .200 MT - .015 ID - .400 OD - .655 MT - .011 #3SPG HOLE - 7/16” #3SPW 1/8 3/64 to 5/64 3/16 1/64 to1/16 1/4 1/32 to 1/16 9/32 1/64 to 1/16 5/16 3/64 to 5/64 FLG - .970 LUF - .185 MT - .015 ID - .546 OD - .970 MT - .011
HEAD HEIGHT LENGTH Head Dia Head Ht L Overall Head Dia Head Ht L Overall Head Dia Head Ht L Overall Head Dia Head Ht L Overall Head Dia Head Ht L Overall #1XLSPG HOLE - 5/16” #1SPW Terminology: LUF = Length Under Flange, FLG = Flange Diameter, ID = Inside Diameter, OVERALL 21/64 1/16 15/64 11/32 5/64 13/64 13/32 1/16 15/64 13/32 1/16 17/64 7/16 1/16 1/4 FLG - .630 LUF - .320 MT - .015 ID - .400 OD - .655 MT - .011 OD = Outside Diameter, MT = Metal Thickness D3005 D2783 D3161 D3558 D2859 D2690 Hole Dia Thk of Work Hole Dia Thk of Work Hole Dia Thk of Work Hole Dia Thk of Work Hole Dia Thk of Work Hole Dia Thk of Work 3/8 3/64 to 1/16 7/16 1/32 to 1/16 1/2 1/32 to 1/16 9/16 3/64 to 3/32 5/8 1/16 to 3/32 3/4 1/16 to 3/32 FLG
LUF Oblong Grommets & Washers
Head Dia Head Ht L Overall Head Dia Head Ht L Overall Head Dia Head Ht L Overall Head Dia Head Ht L Overall Head Dia Head Ht L Overall Head Dia Head Ht L Overall Stimpson Oblong Grommets and Washers are offered in brass, aluminum, zinc 1/2 1/16 15/64 21/32 5/64 1/4 21/32 5/64 9/32 23/32 1/16 9/32 13/16 5/64 19/64 59/64 5/64 19/64 and stainless steel. Some of our most popular sizes are displayed below. I D Hole DiaD3560 Thk of Work Hole Dia D3550 Thk of Work Hole Dia D3561 Thk of Work Hole Dia D3463 Thk of Work O D 7/8 1/16 to 3/32 1 1/8 to 5/32 1-1/8 1/32 to 1/8 1-1/4 1/16 to 3/32
A670/C501 A671/C264 A1496/C714
Head Dia Head Ht L Overall Head Dia Head Ht L Overall Head Dia Head Ht L Overall Head Dia Head Ht L Overall 1-1/16 1/16 19/64 1-9/64 3/32 21/64 1-5/16 3/32 11/32 1-7/16 3/32 11/32
Hole Dia D3868 Thk of Work Hole Dia D3632 Thk of Work Hole Dia D4212 Thk of Work Hole Dia D4197 Thk of Work 1-3/8 3/64 to 1/8 1-1/2 1/32 to 1/16 1-5/8 1/32 to 1/8 1-3/4 1/32 to 3/32 Grommet Dimensions Grommet Dimensions Grommet Dimensions FLG LUF FLG LUF FLG LUF 1.315 X .665 .225 2.015 X .915 .332 2.375 X .965 .308 Washer Dimensions Washer Dimensions Washer Dimensions ID OD ID OD ID OD .268 X .923 .625 X 1.286 .420 X 1.532 .915 X 2.010 .468 X 1.812 .968 X 2.375
A591/C189 A113/C118 A3537*/C829* Head Dia Head Ht L Overall Head Dia Head Ht L Overall Head Dia Head Ht L Overall Head Dia Head Ht L Overall 1-9/16 5/64 13/32 1-41/64 3/32 13/32 1-13/16 7/64 23/64 1-15/16 3/32 11/32
Hole Dia D3103 Thk of Work 2 1/32 to 1/16 ®
Co. Inc.
Grommet Dimensions Grommet Dimensions Grommet Dimensions ISO 9001 Certified FLG LUF FLG LUF FLG LUF MT 1.125 X .690 .222 1.406 X .565 .269 1.405 X 1.035 .285 .014 Washer Dimensions Washer Dimensions Washer Dimensions Head Dia Head Ht L Overall 1515 SW 13th Court, Pompano Beach, FL 33069 ID OD ID OD ID OD MT .400 X .800 .685 X 1.125 .312 X 1.187 .562 X 1.437 2-1/4 1/8 5/16 (877) 765-0748 • Fax: (954) 545-7440 .925 X .575 1.405 X 1.035 .014
All dimensions are in inches. Web Site: www.stimpson.com • E-Mail: [email protected] All photos approximate actual size. * Indicates embossed oblong grommet & washer. 13 6 An Snap Fasteners ® HEAD DIA. CE Rivets SHANK LUH DIA. Introduction to Terminology Ring Snap Sets CE ® 75 Series - Roll Setting ® SET D4617 SET D4902 SET D4862 (24 Line) (20 Line) (20 Line Long) Rivet Shank Head L.U.H. Flange D4543 D4861 D4861 Dia. Dia. Co. Inc. Barrel Wall CE® 75 2/16 .091 .192 .125
CAP ® Cap Length Cap Length Cap Length CE 75 3/16 .091 .192 .187 Eyelets ® Diameter Under Cap Diameter Under Cap Diameter Under Cap CE 75 4/16 .091 .192 .250 Hole .598 .177 .510 .142 .510 .142 (Piercing) CE® 75 5/16 .091 .192 .312 No matter where you are, you’re always surrounded by STIMPSON EYELETS. They’re all over your home: in your appliances, electrical circuits, tools, children’s toys, D4511 D4858 D4858 CE ® 100 Series - Roll Setting clothing, shoes, sneakers, furniture, lighting fixtures, outlets and switches, heating units, alarms, and more. They’ll surround you in your car, on planes, trains, SOCKET Rivet Shank Head L.U.H. buses...even in space shuttles; and when you go to work, shopping or the gym, Dia. Dia. you’ll find them there also. Measuring the Eyelet Flange Diameter (FLG) D4547 D4859 D4859 CE® 100 5/32 .120 .224 .156 Small, inexpensive, and often not seen, STIMPSON EYELETS are an indispensable CE® 100 7/32 .120 .224 .218 STUD ingredient in the successful production of CE® 100 4/16 .120 .224 .250 most every manufacturing industry. On the CE® 100 5/16 .123 .224 .312 pages that follow, we will introduce you to ® Length CE 100 6/16 .123 .224 .375 some of the over 3,800 sizes and styles we Outside D4629 D4902 D4862 Diameter Under CE® 100 7/16 .123 .224 .437 ship worldwide. For more information (OD) Flange ® regarding STIMPSON EYELETS, please request (LUF) CE 100 8/16 .123 .224 .500 ® our Eyelet Catalog. POST CE 100 9/16 .123 .224 .562 Hole Diameter Head Length Head Length Head Length Diameter Under Head Diameter Under Head Diameter Under Head CE ® 123 Series - Scored Setting We now provide the following “Introduction Inside Diameter .562 .239 .495 .179 .495 .234 to Stimpson Eyelets” to acquaint you with (ID) their many characteristics, and we invite Rivet Shank Head L.U.H. you to speak with our Customer Service The combinations displayed are a representation of the Dia. Dia. Representatives about your eyeleting needs. STIMPSON EYELETS are the low cost, variety of quality Snap Fasteners offered by Stimpson. reliable solution to thousands of fastening requirements. CE® 123 4/16 .142 .315 .250 Most Snap Fasteners are available in both brass and CE® 123 5/16 .142 .315 .312 steel, with varying sized posts to accommodate material CE® 123 6/16 .142 .315 .375 thickness. Popular finishes include nickel and dull black CE® 123 7/16 .142 .315 .437 chemical. Standard Tolerances Settings CE ® 125 Series - Roll Setting Stimpson Ring Snaps conform to MIL-F-10884, MS 27980 and MS 27981. Dimensions Tolerance Rivet Shank Head L.U.H. Dia. Dia. Flange Diameter +/-.005” CE® 125 3/16 .142 .315 .187 Outside Diameter +/-.002” CE® 125 4/16 .142 .315 .250 ROLL SCORED FLARED CE® 125 5/16 .142 .315 .312 Length Under Flange +/-.005” CE® 125 6/16 .142 .315 .375 Hole Diameter usually .005” There are three basic types of settings...Roll (or coil), CE® 125 7/16 .142 .315 .437 Scored, or Flared. smaller than mean CE® 125 8/16 .142 .315 .500 inside diameter The most common is the Roll which provides a smooth, rounded, uniform surface. CE® Rivets are made from brass and steel. They can A Scored setting divides the end of the barrel into equal be plated in nickel, brass, antique bronze or a segments to provide extra grip strength in soft materials. variety of other finishes. Designed for today’s light ® ® A Flared setting is commonly used in PC boards and to medium riveting applications, CE Rivets are provides a funnel appearance often used for soldering. uniform, strong and coil better than conventional Co. Inc. tubular rivets. A full line of foot, electric and pneumatic machines supports their application.
7 12 For Tags, Envelopes, Binders and Polybags The Flange The Barrel Designed and manufactured to run in today’s high speed machinery, Stimpson eyelets provide the exacting tolerances needed to ensure Ro l led Flange : A finished and decorative Straight Barrel : Straight barrel eyelets are appearance makes the Rolled Flangea the most commonly used. The holes in the uninterrupted production. These proven industry standards have been developed over time to meet almost any production requirement. popular choice. When set, the under materials to be fastened together are edges of the flange lend well to obtaining usually the same size, and the straight “Tag and Polybag” A3730 A1951 A168 A34 A2491 Zinc Zinc Aluminum, Brass, Zinc Brass a tight setting by gripping the work. barrel aids in alignment. Flat Flange Eyelets Aluminum, Brass, Zinc Flat Flange: Usually selected when minimum Taper ed B arrel : The barre l has a definite above surface projection is desired, or tape rin g dow n of diameter fro m just un der where a recessed hole is used for clearance the flan ge to th e bottom e nd. D es irable OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT primarily in faste nin g so ft materials s ince .194/.188 .089 .256 .0115 .195/.190 .093 .254 .0115 .196 .095 .250 .008 .215/.205 .092 .330 .008 .245 .095 .324 .010 requirements. In soft or thin materials they may be chosen to avoid the flange cutting the tape r provide s an eas y in se rtion into A35 A2658 A36 A38 A558 through the material. the work. Brass, Steel, Zinc Aluminum, Brass, Steel Aluminum, Brass, Zinc Brass & Zinc Brass & Zinc Embos s e d Flange: Combines the contour Shou lder Eyel et s: So called because the of the rolled and flat flange to provide barrel consists of two distinct diameters the holding power of the roll w ith a flat resulting in a stepped shoulder effect.
OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT outer edge to reduce the chance of Used to join parts w ith dissimilar hole .260/.250 .132 .375 .008 .341 .115 .450 .008 .342 .092 .460 .008 .343 .131 .468 .009 .356 .110 .475 .010 cutting through the work. sizes, or w ith the upper (larger) barrel portion acting as a spacer. “Button & String A22 A1119 A3576 A3577 Fu nnel Flange : Popular in the electronics Brass & Zinc Brass & Zinc (scored) Brass Brass Envelope” Eyelets industry for easy insertion of leads, Clos ed End: A closed end can be used and/or trapping of solder flow on P C to fasten different pieces together w hile boards. Used for costume jewelry w here eliminating the pass through of air, dirt, gem stones are glued into the funnel grease, or other foreign matter. To set, the end of the barrel is bumped to collapse OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT contour. .148/.140 .149 .218 .007 .151/.147 .117 .225 .008 .148/.140 .148 .218 .008 .151/.147 .117 .225 .008 tightly against the work pieces.
Bel l Flange: Also ideal for easy acceptance Rolled Flange Eyelets A942 A211 A737 A740 of leads. The rounded inner contour reduces Oblon g and Squ are Barrel s: In addition Aluminum, Brass, Steel Aluminum, Brass, Zinc Brass Aluminum, Brass to the most common barrel styles described for “Ribbons, abrasion where wire, cord, or rope is passed through the length of the barrel. above, Oblong and Square Barrels are Folders, Financial & popular for specialized applications. Legal Documents”
OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT Clipped Flange: Where space constraints .185 .145 .312 .008 .185 .147 .285 .010 .185/.175 .182 .285 .010 .185 .102 .285 .009 require virtually no flange, the usual Pr e- Coi led : Normally used as spacers,
flange area is clipped (trimmed) as close they are frequently molded in place in as possible to the outside diameter of the rubber or plastics. Eyelets for Apparel barrel. Stimpson Apparel Eyelets are made to industry and military standards with decorative flanges as well as popular finishes such as nickel, brass, various Coil/Grip Ranges shades of antique bronze and military specified colors. No two applications being alike, it’s impossible to offer specific standards as to how much barrel length there ANTIQUE BRONZE PLATING MILITARY SPECIFIED should be to obtain proper coil/grip. Too much length can result in barrel buck ling (collapsing). Too little may mean loss of grip strength. Rigid materials usually need less; soft flexible materials w ill need more, as a w ide coil (to grip more material) is desirable. If parts fastened are exposed to unusual stresses, extra length is usually Industry Standards Eyelets with Matching Washers desirable, even though materials may be rigid in nature. A2058 A942 A289 A618 A500 A928 Brass & Steel Aluminum, Brass, Steel Brass, Steel Aluminum, Brass, Steel Aluminum, Brass, Steel Brass As a general guide in preliminary selection, the follow ing should be helpful:
Eyelet Diameter: 3/64” to 1/16” 3/ 32” to 1/ 8” 5/32” to 3/16” 1/4” or more
OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT Additional Length: 1/32” 1/16” 3/32” 1/8” .183 .142 .300 .010 .185 .145 .312 .008 .215 .165 .390 .008 .273 .185 .450 .008 .332 .185 .593 .010 .413 .250 .750 .014 C62 C63 C790 C83 C84 C85 For final determination as to proper length, after selecting an eyelet let us make actual settings for your functional testing. Or, send samples of your components and we’ll select an eyelet and forward the settings for your review.
ID OD ID OD ID OD ID OD ID OD ID OD .218 .375 .188 .375 .220 .463 .289 .546 .359 .700 .453 .835
11 8 GS® Eyelets Shoe Eyelets
Outside Diameter Outside Diameter Stimpson “Graduated Size” (GS®) Eyelets are as their name indicates...a system of standard Length Under eyelets incorporating a series of graduated increases (1/32 of an inch) in both length and Flange Length Under outside barrel diameters. The result is 72 eyelets which will meet the requirements of most Flange general purpose eyeleting applications. GS® Eyelets are most commonly requested in brass, Flange Diameter Invisible Rolled Scored Hexagon ® Flange and are normally inventoried in large quantities. GS Eyelets can also be made from steel, Diameter stainless steel, aluminum and copper. #1 INVISIBLE #2 INVISIBLE #3 INVISIBLE #00 ROLL #00 ROLL #00 LONG ROLL A2601* Aluminum A3639* Aluminum A2068* Aluminum A1967 Aluminum A2400 Brass A 3625 Aluminum
72 Graduated Size eyelets, teamed with Stimpson’s economical eyeleting machines, offer the highest quality system in the industry, at the lowest cost.
OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT LENGTH UNDER FLANGE .230/.209 .135 .333 .014 .184/.156 .136 .298 .014 .175/.146 .124 .255 .016 .277 .157 .490 .016 .275 .150 .495 .011 .282 .182 .493 .016 INCHES 2/32 3/32 4/32 5/32 6/32 7/32 8/32 9/32 10/32 11/32 12/32 13/32 14/32 .062 .093 .125 .156 .187 .219 .250 .281 .312 .344 .375 .406 .437 J.L. ROLL J.L. ROLL #00 LONG ROLL #00 EX. LONG ROLL A1942 Aluminum A3165 Brass & Steel A2620 Brass & Steel A3654 Aluminum OUTSIDE .059 ® DIAMETER Co. Inc. FLANGE .105 OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT DIAMETER Available .321/.288 .222 .515 .018 .290/.270 .225 .510 .013 .280/.272 .180 .488 .012 .280 .210 .495 .016 METAL .007 with rolled THICKNESS GS 2-2 GS 2-3 GS 2-4 GS 2-5 GS 2-6 GS 2-7 AA ROLL AA ROLL AA SCORED AA SCORED AA LONG ROLL AA LONG ROLL or flat A2269 Aluminum A2605 Brass & Steel A2272* Aluminum A289* Brass & Steel A2030 Aluminum A2617 Brass & Steel OUTSIDE .089 DIAMETER flange... FLANGE .150 open or OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT DIAMETER closed end .220 .168 .390 .015 .215 .150 .390 .008 .220 .168 .390 .015 .215 .165 .390 .008 .220 .188 .390 .015 .215 .188 .388 .010 METAL .009 THICKNESS GS 3-3 GS 3-4 GS 3-5 GS 3-6 GS 3-7 GS 3-8 GS 3-9 GS 3-10 GS 3-11 GS 3-12 AA EX. LONG ROLL AA EX. LONG ROLL AA LONG SCORED AA EX. LONG SCORED #1 ROLL #1 ROLL A3138 Aluminum & Brass A3433 Brass A2711* Brass A3592* Brass A1928 Aluminum A2282 Brass OUTSIDE .121 DIAMETER FLANGE .200
DIAMETER OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT .227/.220 .220 .385 .018 .228 .217 .390 .012 .215 .190 .388 .010 .215 .215 .388 .010 .208/.192 .142 .345 .016 .204 .153 .343 .011 METAL .0095 THICKNESS GS 4-3 GS 4-4 GS 4-5 GS 4-6 GS 4-7 GS 4-8 GS 4-9 GS 4-10 GS 4-11 GS 4-12 #1 SCORED #1 SCORED #1 LONG ROLL #1 LONG ROLL #1 EX. LONG ROLL #1 LONG SCORED OUTSIDE .152 A2000* Aluminum A2041* Brass & Steel A1979 Aluminum A2380 Brass A1685 Aluminum A2374* Aluminum DIAMETER FLANGE .245 DIAMETER OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT METAL .010 .201 .155 .345 .016 .204 .153 .343 .011 .200/.190 .182 .343 .016 .204 .185 .345 .009 .200 .212 .343 .016 .200/.190 .187 .343 .016 THICKNESS GS 5-3 GS 5-4 GS 5-5 GS 5-6 GS 5-7 GS 5-8 GS 5-9 GS 5-10 GS 5-11 GS 5-12 OUTSIDE .183 #2 ROLL #2 ROLL #2 SCORED #2 SCORED #2 LONG ROLL #2 EX. LONG ROLL A2187 Aluminum A1387 Brass A2101* Aluminum A2058* Brass & Steel A2343 Aluminum A2627 Aluminum & Brass DIAMETER FLANGE .290 DIAMETER
METAL .0105 OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT .177 .138 .300 .016 .173 .142 .300 .012 .177 .138 .300 .016 .183 .142 .300 .010 .180 .165 .300 .013 .180 .190 .300 .013 THICKNESS GS 6-3 GS 6-4 GS 6-5 GS 6-6 GS 6-7 GS 6-8 GS 6-9 GS 6-10 GS 6-11 GS 6-12 GS 6-13 GS 6-14 OUTSIDE .215 #3 SCORED #4 ROLL #5 ROLL SMALL HEXAGON LARGE HEXAGON LONG MILITARY BOOT DIAMETER A2227* Aluminum A2013 Brass A2232 Aluminum A3660 Brass A3467 Brass A2639 Aluminum FLANGE .340 DIAMETER
METAL .011 OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT OD LUF FLG MT THICKNESS GS 7-3 GS 7-4 GS 7-5 GS 7-6 GS 7-7 GS 7-8 GS 7-9 GS 7-10 GS 7-11 GS 7-12 GS 7-13 GS 7-14 .157 .122 .253 .015 .157 .102 .235 .010 .127 .105 .195 .012 .185 .175 .330 .011 .224 .212 .463 .012 .297/.285 .198 .490 .016
OUTSIDE .246 DIAMETER #505 EYELET #303 WASHER Terminology: OD = Outside Diameter. Eyelets with two OD measurements indicate a tapered barrel. A2095 Telo Aluminum A1950* Telo Aluminum LUF = Length Under Flange, FLG = Flange Diameter, MT = Metal Thickness FLANGE .385 * Indicates scored eyelet. DIAMETER METAL .011
THICKNESS GS 8-3 GS 8-4 GS 8-5 GS 8-6 GS 8-7 GS 8-8 GS 8-9 GS 8-10 GS 8-11 GS 8-12 GS 8-13 GS 8-14 OD LUF FLG MT OD LUF FLG MT .307/.295 .150 .537 .016 .335 .100 .545 .009 9 10