Retrofit Retrofit Retrofitting older turbines with new control technology will effectively see you improve the availability and secure your turbine for the future.

The Value of Retrofit SDL Certification

Retrofitting older turbines with new and field-proven control Mita-Teknik is happy to announce that it has received the technology, including advanced new control algorithms and official SDL certificate for the MD70/77, FL70/77 and S70/77 intelligent SCADA solutions, can effectively increase the platforms using the Mita-Teknik WP3100 MK ll controller. turbine’s annual energy production, heighten the availability and provide modern remote access. In combination with renewed access to spare parts, the turbine’s lifetime can be extended with better profitability.

All turbines ranging from kW to the MW class can benefit from being upgraded with new technologies. No matter if it is stall, active stall, pitch, 2 or 3 bladed turbines. Mita-Teknik’s extensive experience and knowhow cover many of the turbines ready for retrofit today, and as we have developed solutions for these in the past - we can easily provide you with a retrofit solution that will increase the performance of your turbine, and increase your earnings.

The Bottom Line

The size of investment depends on the state of the turbine. “In close cooperation with our German partners, SeebaWind and Our focus is always to reuse as much of the existing GE Power & Water, we have secured the SDL certificate from the equipment as possible, so that the investment is kept at German accreditation agency M.O.E. The certification means that a level where cost, functionality and return on investment our WP3100 MK ll Retrofit solution, for the MD70 (1.5 MW) turbine is balanced and positive. When retrofitting older turbines, platform, comply with the regulatory requirements for the SDL it is of critical importance that the new systems are fully bonus scheme. The scheme is initiated by the German government compatible and compliant with the environment in the wind to ensure stability in the power grid, and allows owners € 0.7 Cent turbine. Mita-Teknik only use technology that has been more per kWh until 2020, if they meet the requirements before proven through use in thousands of wind turbines, to ensure the end of 2015.” - Kristian Kjærholm, Business Development that it runs smoothly and error free for many years to come. Director for Retrofit.

If you want to learn more about Mita-Teknik’s Retrofit

Solution, please do not hesitate to contact us: Denmark without written permission from Mita-Teknik in any form All rights reserved. may not be reproduced Content Mita-Teknik. © 2015 [email protected] +45 8665 8600

®

Great at Control RETROFIT Retrofit Retrofitting your turbines with new and field-proven control technology running advanced control algorithms, and combining it with intelligent SCADA solutions - you will effectively increase your turbines AEP and improve availability and accessibility.

Positive ROI

Reference List Bring Your › V25-V47 200-660 kW › Fuhrländer MD70 1.5 MW › Fuhrländer FL 250 kW Turbines › N60 1.3 MW › Südwind N3127 270 kW › Dongfang FD77 1.5 MW Back to Access to › NM82 2 MW Spare Parts › Dewind D4/D6 600-1250 kW Life › Bonus/Siemens 1.3 MW › Bonus 837 450 kW › Micon M1500 500/600 kW › Neg-Micon NM48 750 kW › Nordtank NTK300 300/200 kW › Norwin 225 225 kW › TackeTW600 600 kW Proven › Sinovel SL1500 1.5 MW › Sewind 1.25 MW › S64 1.25 MW Technology › Wind Master 300/60 kW › Suzlon S33-350 350 kW Access Wind › Tacke TW500 500 kW › Autoflug A1200 1.2 MW Turbine Data via › HSW 250 T 250 kW › and more... Tablet or Phone