SB220S – SB2100S 2.0A SCHOTTKY BARRIER DIODE WON-TOP ELECTRONICS Pb

Features  Schottky Barrier Chip  Guard Ring for Transient and ESD Protection  Surge Overload Rating to 50A Peak A B A  Low Power Loss, High Efficiency  Ideally Suited for Use in High Frequency SMPS, Inverters and As Free Wheeling Diodes

Mechanical Data C  Case: DO-41, Molded Plastic D  Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 DO-41 Dim Min Max  Polarity: Cathode Band A 25.4 —  Weight: 0.35 grams (approx.) B 4.06 5.21  Mounting Position: Any C 0.71 0.864  Marking: Type Number D 2.00 2.72  Lead Free: For RoHS / Lead Free Version, All Dimensions in mm Add “-LF” Suffix to Part Number, See Page 4

Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.

SB SB SB SB SB SB SB Characteristic Symbol Unit 220S 230S 240S 250S 260S 280S 2100S

Peak Repetitive Reverse Voltage VRRM Working Peak Reverse Voltage VRWM 20 30 40 50 60 80 100 V DC Blocking Voltage VR

RMS Reverse Voltage VR(RMS) 14 21 28 35 42 56 70 V

Average Rectified Output Current (Note 1) IO 2.0 A

Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on IFSM 50 A Rated Load (JEDEC Method)

Forward Voltage @IF = 2.0A VFM 0.50 0.70 0.85 V

Peak Reverse Current @TJ = 25°C 0.5 IRM mA At Rated DC Blocking Voltage @TJ = 100°C 10

Typical Junction Capacitance (Note 2) CJ 150 100 pF

Thermal Resistance, Junction to Ambient (Note 3) RθJA 50 °C/W Thermal Resistance, Junction to Lead (Note 3) RθJL 15

Operating Temperature Range TJ -65 to +125 -65 to +150 °C

Storage Temperature Range TSTG -65 to +150 °C

Note: 1. Leads maintained at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 3. Vertical PCB mounting with 12.7mm lead length on 63.5 x 63.5mm copper pad.

SB220S – SB2100S

WON-TOP ELECTRONICS 2.5 10

TA = 25°C

2.0 SB250S – SB260S SB250S – SB2100S 1.0 1.5 SB220S – SB240S

SB220S – SB240S 1.0 SB280S – SB2100S 0.1

0.5 Pulse Width = 300µs Resistive or 1% Duty Cycle

Inductive Load (A) CURRENT FORWARD , INSTANTANEOUS F , AVERAGE FORWARD RECTIFIED (A) CURRENT FORWARD AVERAGE , I

(AV) 0 0.01 I 0 15 30 45 60 75 90 105 120135 150 0 0.2 0.4 0.6 0.8 1.0 TL, LEAD TEMPERATURE (°C) VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Forward Current Derating Curve Fig. 2 Typical Forward Characteristics

50 100 Single Half-Sine-Wave JEDEC Method 40 10

TJ = 125°C 30 1.0

20 0.1 TJ = 75°C

10 0.01 TJ = 25°C (A) SURGE CURRENT , PEAK FORWARD FSM I , INSTANTANEOUS REVERSE CURRENT (mA) REVERSE CURRENT , INSTANTANEOUS R I 0 0.001 1 10 100 0 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 3 Forward Surge Current Derating Curve Fig. 4 Typical Reverse Characteristics 250

f = 1MHz 200

SB220S – SB260S 150

100 SB280S – SB2100S

, JUNCTION CAPACITANCE (pF) , JUNCTION CAPACITANCE J 50

0 0.1 1 10 100

VR, DC REVERSE VOLTAGE (V) Fig. 5 Typical Junction Capacitance www.wontop.com © Won-Top Electronics Co., Ltd. 2 Revision: September, 2012 ®

SB220S – SB2100S

WON-TOP ELECTRONICS

MARKING INFORMATION TAPING SPECIFICATIONS

0.8mm MAX

5mm Cathode = Polarity Band 1.2mm MAX SB2xxS SB2xxS = Device Number xx = 20, 30, 40, 50, 60, 80 = or 100

6mm 52.4mm 0.8mm MAX Cathode Tape: Red Anode Tape: White

PACKAGING INFORMATION

TAPE & BOX TAPE & REEL Product ID Label

150mm Inspection Hole (both ends)

330mm 255mm 75mm

BULK

80±5mm 20mm Product ID Label 84mm

198mm

Reel Diameter / Quantity Carton Size Quantity Approx. Gross Weight Packaging Box Size (mm) (PCS) (mm) (PCS) (KG)

TAPE & REEL 330 5,000 370 x 370 x 420 25,000 13.0

TAPE & BOX 255 x 75 x 150 5,000 400 x 273 x 415 50,000 21.0

BULK 198 x 84 x 20 1,000 459 x 214 x 256 50,000 19.5

Note: 1. Paper reel, white or gray color. Core material: plastic or metal. 2. Components are packed in accordance with EIA standard RS-296-E.

SB220S – SB2100S

WON-TOP ELECTRONICS

ORDERING INFORMATION

Product No. Package Type Shipping Quantity

SB2xxS-T3 DO-41 5000/Tape & Reel

SB2xxS-TB DO-41 5000/Tape & Box

SB2xxS DO-41 1000 Units/Box

1. Products listed in bold are WTE Preferred devices. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. 3. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, SB220S-TB-LF.

WON-TOP ELECTRONICS and are registered trademarks of Won-Top Electronics Co., Ltd (WTE). WTE has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice.

WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval.

Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung 806, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com We power your everyday.