RITE Slide TECHNICAL INFORMATION

NON ACOUSTIC SERIES ACOUSTICALLY RATED SERIES (STC-34) RITE Slide INDEX

Introduction ...... 1 General Information ...... 2 Aluminum Frame Material Composition ...... 3 Frame Profiles ...... 4 Product Overview ...... 5 WRS-EC 5-Ply Engineered Composite Core ...... 6 GPD-PC 5-Ply Particleboard Core ...... 8 Edge Options ...... 10 Veneer Cutting Methods ...... 11 Veneer Assembly Methods ...... 13 Specie Grading Chart (AA Grade) ...... 15 Specie Grading Chart (A Grade) ...... 16 Face Type Elevation ...... 17 Factory Installed Glass ...... 18 Full Glass Door ...... 19 Glazing Option ...... 20 Mouldings ...... 21 Louver Units ...... 22 Chart ...... 23 Colors ...... 24 Factory Finish ...... 25 Stain Swatches ...... 26 Operational Hardware ADA Surface Pulls ...... 34 Mortise Deadlocks ...... 35 Mortise Lock ...... 36 Accessories Seals ...... 37 Sliding Track Hardware ...... 38 Automatic Door Bottom ...... 39

Rev. 7/21 RITE Slide INTRODUCTION

INTRODUCTION

The intent of this technical manual is to answer as many of your questions as possible within these pages. Graphic depictions of actual products are presented. There are five sections in the manual to segregate and simplify the process of finding your answers. The five sections are described below. ASSA ABLOY reserves the right to alter product designs to improve the quality of the product. Specific details contained herein are current as of the printing of this manual and may be changed at any time to enhance the product and/or it marketability. Products are warranted against defects in workmanship and materials for a period of one year. A complete detailed warranty may be obtained by contacting customer service General Information This section contains an overview of the available series of RITE Slide. It outlines the complete assembly components of these integrated solutions along with applicable test certificates. Frames The Frames section provides materials and finishes available. It provides various frame profile details, compatible wall thicknesses and optional fascia profiles. Doors This section details all available door options for RITE Slide. It includes door construction, core types, species, finishes, as well as lite and louver kits with available mouldings. Hardware Available operational hardware includes options for surface pulls, mortise deadlocks and mortise locks. This section details the functions of each, as well as trim and finish options. Accessories The Accessories section provides detailed information on the seals used for each series, sliding track hardware, automatic door bottom and door guide.

FOR INFORMATION CALL 218-828-6256 1 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 3/20 RITE Slide GENERAL INFORMATION

NON ACOUSTIC SERIES Assembly Components • Wood door • Aluminum frame, track, fascia and end caps • Hanger body/roller assemblies with track stops • Soft close and soft open devices • Pile gaskets • Frame mounted bottom door guide • Automatic door bottom • Door pulls and/or locking hardware Testing Information • Cycle tested to 100,000 cycles with periodic replacement of soft close devices • Fire rating: not applicable • Smoke rating: not applicable

ACOUSTICALLY RATED SERIES (STC-34)* Assembly Components • Wood door • Aluminum frame, track, fascia and end caps • Hanger body/roller assemblies with track stops • Soft close and soft open devices • Silicone gaskets • Frame mounted bottom door guide • Automatic door bottom • Door pulls and/or locking hardware Testing Information • Cycle tested to 100,000 cycles with periodic replacement of soft close devices • Fire rating: not applicable • Smoke rating: smoke and draft rated • Sound rating: STC-34*

*Complete assembly lab tested with engineered core flush wood door sealed in place FOR INFORMATION CALL 218-828-6256 2 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 3/21 RITE Slide ALUMINUM FRAME

MATERIAL COMPOSITION

Track Assembly Width

5.5" L NET Door Width

L

K K J J Finished Frame Opening Height Opening Frame Finished Rough Frame Opening Height Opening Frame Rough NET Door Height Door NET

Finished Frame Opening Width 1.5" 2" Rough Opening Width

MATERIAL COMPOSITION Standard Aluminum Alloy • 6063 sharp corners broken at 0.015 R Available Finishes • Class II clear anodized (standard) • Custom colors available upon request

FOR INFORMATION CALL 218-828-6256 3 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 3/20 RITE Slide ALUMINUM FRAME

FRAME PROFILES

FASCIA PROFILES Round

Frame Wall Cap Profile J

Receiver Channel Wall Cap with C-Channel Profile K

FRAME PROFILES • Compatible wall thicknesses • 4-7/8” • 5-1/4” • 5-1/2” • 7-1/4” • Other sizes available upon request • 1-1/2” Flush exposed frame face trim conceals all clips and fasteners • 5-1/2” Fascia conceals sliding door track and sliding door hardware • Fascia profiles • Square (standard) • Round • Chamfer

Frame Header Cap with Round Fascia • Endcaps (2x) matching the fascia profile shape cover Profile L the ends of the sliding door track • Integral C-Channel provides cavity for door to close into with optional strike prep for locking hardware

FOR INFORMATION CALL 218-828-6256 4 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 9/20

RITE Slide WOOD DOOR

PRODUCT OVERVIEW

RITE SLIDE DOOR Standard Features • All bonded construction up to 9’0” tall Bonded Core • Meets WDMA I.S. 1-A premium grade Composite Matching Crossband • Face veneer meets WDMA “A” grade Stiles or Edgebanded • Face veneer minimum 1/50" thick • Type 1 adhesives – face to core • Adhesives contain no formaldehyde • Limited Lifetime Warranty • Engineered to meet or exceed industry performance requirements “A” Grade Face Options • “AA” grade face veneers Composite Hardwood Rails • Core Types • EC – Engineered Composite • PC – Particle • FSC certification

FOR INFORMATION CALL 218-828-6256 5 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

WRS-EC 5-PLY ENGINEERED COMPOSITE LUMBER CORE

Top Rail

Vertical Stiles

Core CONSTRUCTION

Face Horizontal Edges • Top and bottom rails – structural composite lumber Crossband • Bonded to core • 1” minimum after factory trim Bottom Rail Vertical Edges • Matching vertical edges • Bonded to core • Structural composite lumber (SCL) laminated to a matching hardwood face (standard for , , and ) • Structural composite lumber (SCL) laminated with a matching veneer edge band on veneers other than listed above as standard with optional hardwood stiles face available Core • Structural composite lumber • Meets requirements of LEED MR4 • Contains no added Urea-formaldehyde Adhesive • Doors constructed using Type I adhesives which contain no added Urea-formaldehyde Construction Grade • Performance: WDMA/AWS – Extra Heavy Duty • Aesthetic: WDMA – Premium Grade

FOR INFORMATION CALL 218-828-6256 6 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

WRS-EC 5-PLY ENGINEERED COMPOSITE LUMBER CORE CONSTRUCTION CONT. Face Veneer • Available in a wide variety of vertical & horizontal grain wood species, Medium Density Overlay (MDO), and Primed • WDMA/AWS “A” Grade, Book and Running Match, standard • Slip, Balance, and Center Balance Match available upon request • WDMA/AWS “AA” Grade available upon request Crossband • 1/16" (1.6 mm) minimum high density composite • Optional with no added Urea-formaldehyde Finish • UV cured factory finish meets or exceeds WDMA TR-6 and Architectural Woodwork Standards (AWS) First Edition – System #9 • Available in 6 standard colors and custom color match Certifications and Sustainability: • Optional LEED 3.0 credits available • MR 4 – Recycled Content (standard) • MR 5 –Regional Materials • MR 7 – FSC Certified Wood • IEQ 4.4 – Low-emitting Materials • California Air Resources Board (CARB) • GreenGuard - Indoor Air Quality & Children in Schools • Collaborative for High Performance Schools (CHPS)

FOR INFORMATION CALL 218-828-6256 7 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

GPD-PC 5-PLY PARTICLEBOARD CORE

Top Rail

Vertical Stiles

Core

Face CONSTRUCTION

Crossband Horizontal Edges: • Top and bottom rails - structural composite lumber Bottom Rail • Bonded to core • 1” minimum after factory trim

Vertical Edges: • Matching vertical edges • Bonded to core • Structural composite lumber (SCL) laminated to a matching hardwood face (standard for Oak, Birch, and Maple) • Structural composite lumber (SCL) laminated with a matching veneer edge band on veneers other than listed above as standard with optional hardwood stiles face available

Core: • Conforms to ANSI A208.1 Standard LD1 Particleboard Core - 28 lbs/ft3 • Meets requirements of LEED MR4

FOR INFORMATION CALL 218-828-6256 8 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

GPD-PC 5-PLY PARTICLEBOARD CORE

CONSTRUCTION CONT.

Adhesive: Finish: • Doors constructed using Type I adhesives which • UV cured factory finish meets or exceeds WDMA TR-6 contain no added Urea-formaldehyde and Architectural Woodwork Standards (AWS) First Edition - System #9 Construction Grade: • Available in 6 standard colors and custom color match • Performance: WDMA/AWS - Extra Heavy Duty* Certifications and Sustainability: • Aesthetic: WDMA - Premium Grade • Optional LEED 3.0 credits available MR 4 - Recycled Content (standard) Face Veneer: MR 5 - Regional Materials MR 7 - FSC Certified Wood • Available in a wide variety of vertical & horizontal grain wood IEQ 4.4 - Low-emitting Materials species, Sketch Face, Medium Density Overlay (MDO), and IEQ 9 - Enhanced Acoustical Performance (LEED for Primed Hardboard schools) STC 35 operable (flush door) • WDMA/AWS “A” Grade, Book and Running Match, standard • California Air Resources Board (CARB) • Slip, Balance, and Center Balance Match available upon request • GreenGuard - Indoor Air Quality & Children in Schools • WDMA/AWS “AA” Grade available upon request • Collaborative for High Performance Schools (CHPS)

Crossband: • 1/16” (1.6 mm) minimum high density engineered wood composite • Optional with no added Urea-formaldehyde

FOR INFORMATION CALL 218-828-6256 9 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

EDGE OPTIONS

EDGE BAND (EB) Our standard edge for RITE Slide TRUE Wood integrated assembly is a veneer edge band material. The veneer band material is applied to the door at the factory during the manufacturing process. This provides a clean finished look to the edge of the door and hides the face veneer backer material.

HARDWARE EDGE Hardwood edges may need to be used in some door configurations. The use of hardwood edges instead of will depend on veneer species and door height. In the event that the door receives hardwood edges, The door edge will sometimes, but not always, have two visible lines running the full length of the door on the hinge and lock edges of the door.

EDGE BANDING LIMITATIONS Maximum Height • 8 ft. Veneer Species: Exotic Veneer Species • In the event of exotic veneer species, it may be difficult to match either the veneer edge band or even the hardwood edge wood material to the exotic face veneer material.

FOR INFORMATION CALL 218-828-6256 10 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

VENEER CUTTING METHODS PLAIN SLICED (FLAT SLICED) Plain Slicing is the method most often used to produce veneers for high quality architectural . The slicing is done parallel to a line through the center of the log. A combination of cathedral and straight grain patterns result, with a natural progression of pattern from leaf to leaf. Plain Sliced (Flat Sliced) Leaf width depends on log size and placement in flitch. Cathedral Pattern Half Round A somewhat similar pattern is achieved by turning a half log flitch on a lathe.

QUARTER SLICED (QUARTER CUT) Quarter Slicing simulates the quarter sawing process of solid lumber, with slicing occuring roughly parallel to a radius line through the log segment. As a result, the individual leaves are narrow for many species. A series of stripes is produced, varying in density and thickness from specie to specie. Quarter Sliced (Quarter Cut) A “flake” pattern is produced when slicing through Medullary Rays in some species, particularly Oak. Narrow Striped Pattern

FOR INFORMATION CALL 218-828-6256 11 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

VENEER CUTTING METHODS ROTARY Rotary cut is achieved when the log is center-mounted on a lathe and “peeled” along the general path of the growth rings. It is like unwinding a roll of paper and provides a generally bold, random appearance. Rotary Rotary cut results in wide sheets with a broad grain pattern. It is difficult to match Rotary cut at veneer joints.

Very Broad Pattern

RIFT (RIFT CUT) Rift veneers are produced most often in Red and White Oak, rarely in other species. Rift veneers and rift sawn solid lumber are produced so differently that a “match” between the two is highly unlikely. Rift Cut Rift Cut occurs at a slight angle from the ra-dius of the flitch to minimize the ray flake ef-fect that can occur in Oak. Comb Grain is the portion which has very tight, straight grain. Narrow Striped Pattern

The individual pieces of veneer sliced or peeled from a log are called “leaves”. They are kept in the same order they were cut from the log, which allows for natural grain progression when faces are assembled. The cutting and assembly meth-ods applied to the veneer leaves determine the appearance of the door face.

FOR INFORMATION CALL 218-828-6256 12 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

VENEER ASSEMBLY METHODS

Book Match Slip Match

MATCHING BETWEEN ADJACENT It is possible to achieve certain visual effects by the manner in which the leaves are arranged. Since rotary cut veneers are difficult to match, most matching is done with sliced veneer. Common types are: Book Match The most commonly used match in the industry, every other piece of veneer is turned over so adjacent leaves are “opened” like the pages of a book. This creates a mirrored-image pattern at the joint line. Slip Match Often used with Quarter Sliced and Rift Cut veneers, adjoining leaves are placed in sequence without turning over any leaves. By “slipping out” Random Match each leaf, a repeating pattern is visible at the joint lines. Random Match Used to produce a “board-by-board” effect, the leaves are placed next to each other in random order and orientation. Veneer leaves may or may not be from the same log. Color and grain may vary greatly between joint lines

FOR INFORMATION CALL 218-828-6256 13 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

VENEER ASSEMBLY METHODS

Running Match

MATCHING WITHIN A VENEER FACE As the slicing of a flitch progresses, the width of resulting leaves changes. As these leaves are assembled into a veneer face, the joints will occur at varying positions on the face depending on what match is specified. The manner in which veneer faces are assembled can be classified as follows: Balance Match Running Match The most common veneer face match, Running Match is achieved by starting on one side and placing leaves consecutively next to each other to assemble veneer faces. The natural width change in leaves is acceptable, and the transition from one face to another may divide a leaf between faces. The resulting appearance is one of non-symmetry, which is more noticeable in some species and cuts than others. Balance Match One way to achieve a symmetrical look on a veneer face is to trim the leaves to a consistent width for use on a single face. This allows for an even or odd number of leaves on any given face Center Balance and provides balance through use of a consistent Match leaf width. Center Balance Match To accomplish symmetry in both the leaf widths and veneer face, leaves are trimmed to a uniform size that allows for a joint to be at the center of the veneer face. This results in an even number of leaves and a fully symmetrical appearance.

FOR INFORMATION CALL 218-828-6256 14 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR SPECIE GRADING CHART (AA GRADE) Birch, Birch, Oak, Oak, Oak, Walnut, SPECIE Cherry Natural Select White Red Red White Black Plain Sliced, Plain Sliced, Plain Sliced, CUT Rotary Rotary Plain Sliced Flat Cut Rotary Rift Plain Sliced Plain Sliced GENERAL SAPWOOD Yes Yes No No No No No No HEARTWOOD Yes No Yes Yes Yes Yes Yes Yes COLOR STREAKS OR SPOTS Slight Slight Slight Slight Yes Yes Yes Slight COLOR VARIATION Yes Slight Slight Slight Slight Slight Slight Slight SHARP COLOR CONTRASTS AT JOINTS Yes (3) Yes (3) Yes (3) Yes(3) Yes (3) Yes (3) Yes (3) Yes (3) VENEER LEAF MATCHING BOOK MATCH Yes Yes Yes Yes Yes Yes Yes Yes SLIP MATCH Specify Specify Specify Specify Specify Specify Specify Specify PLEASING MATCH N/A N/A N/A N/A N/A N/A N/A N/A VENEER LEAF WIDTH NOMINAL MINIMUM LEAF WIDTH (1) 5" 5" 5" 5" 5" 3" 5" 5" NATURAL CHARACTERISTICS BURLS AND PIN 1 per 1 per 1 per 1 per 1 per 1 per 1 per 1 per KNOTS (2) 5 sq. ft. 5 sq. ft. 4 sq. ft. 5 sq. ft. 4 sq. ft. 4 sq. ft. 4 sq. ft. 4 sq. ft. BURL SIZE, MAXIMUM 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" PIN KNOTS, 1 per 1 per None None None None None None AVERAGE NUMBER 5 sq. ft. 5 sq. ft. SIZE N/A N/A 1/8" N/A N/A N/A N/A 1/8" TOTAL N/A N/A 1/4" N/A N/A N/A N/A 1/4" REPAIRED KNOTS No No No No No No No No MINERAL STREAKS No No Slight No No No No Slight BARK POCKETS No No No No No No No No WORM TRACKS Slight Slight No No No No No No VINE MARKS Slight Slight Slight Slight No No No Slight CROSS BARS Slight Slight Slight Occasional Slight Slight Slight Slight RAY FLECK (FLAKE) N/A N/A N/A N/A Slight (4) Slight (4) Slight (4) N/A GUM SPOTS N/A N/A Occasional N/A N/A N/A N/A N/A MANUFACTURING CHARACTERISTICS ROUGH CUT No No No No No No No No Two Two Two Two Two Two Two Two HAIRLINE SPLITS 1/32" x 3" 1/32" x 3" 1/32" x 3" 1/32" x 3" 1/32" x 3" 1/32" x 3" 1/32" x 3" 1/32" x 3" BLENDED REPAIRS Very Small Very Small Very Small Very Small Very Small Very Small Very Small Very Small

(1) Outside components will be different size to allow for edge trim loss and certain types of matching. FOR INFORMATION CALL 218-828-6256 (2) Combined average number. 15 OR VISIT ASSAABLOYSERVICECENTERS.US (3) If Slip, Plank, or Random matched. Rev. 6/21 (4) Blending RITE Slide WOOD DOOR SPECIE GRADING CHART (A GRADE) Birch, Birch, Cherry Mahogany Oak, Oak, Oak, Walnut, SPECIE Natural Select White Red Red White Black Plain Sliced Plain Sliced, Plain Sliced Flat Cut Plain Sliced, Rift Plain Sliced Plain Sliced CUT Rotary Rotary Rotary GENERAL SAPWOOD Yes Yes Yes (6) No 5% (4) 5% 5% Yes (6) HEARTWOOD Yes No Yes Yes Yes Yes Yes Yes COLOR STREAKS Yes Slight Slight Slight Yes Yes Yes Slight OR SPOTS COLOR VARIATION Yes Slight Slight Slight Slight Slight Slight Slight SHARP COLOR Yes (3) Yes (3) Yes (3) Yes(3) Yes (3) Yes (3) Yes (3) Yes (3) CONTRASTS AT JOINTS VENEER LEAF MATCHING BOOK MATCH Yes Yes Yes Yes Yes Yes Yes Yes SLIP MATCH Specify Specify Specify Specify Specify Specify Specify Specify PLEASING MATCH N/A N/A N/A N/A N/A N/A N/A N/A VENEER LEAF WIDTH NOMINAL MINIMUM LEAF 4" 4" 4" 4" 4" 3" 4" 4" WIDTH (1) NATURAL CHARACTERISTICS 1 per 1 per 1 per 1 per 1 per 1 per 1 per 1 per BURLS AND PIN KNOTS (2) 3 sq. ft. 3 sq. ft. 1-1/3 sq. ft. 3 sq. ft. 2-2/3 sq. ft. 2-2/3 sq. ft. 2-2/3 sq. ft. 1-1/3 sq. ft. BURL SIZE, MAXIMUM 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" 3/8" PIN KNOTS, None None 1 per None None None None 1 per AVERAGE NUMBER 5 sq. ft. 5 sq. ft. SIZE 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" TOTAL 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" REPAIRED KNOTS No No No No No No No No MINERAL STREAKS Slight Slight Slight Slight Slight(5) Slight(5) Slight(5) Slight BARK POCKETS No No No No No No No No WORM TRACKS Slight Slight No No No No No No VINE MARKS Slight Slight Occasional Slight Slight Slight Slight Occasional CROSS BARS Slight Slight Occasional Occasional Slight Slight Slight Occasional RAY FLECK (FLAKE) N/A N/A N/A N/A Slight (5) Slight (5)(6) Slight (5) N/A GUM SPOTS N/A N/A Occasional N/A N/A N/A N/A N/A MANUFACTURING CHARACTERISTICS ROUGH CUT No No No No No No No No Two Two Two Two Two Two Two Two HAIRLINE SPLITS 1/16" x 6" 1/16" x 6" 1/16" x 6" 1/16" x 6" 1/16" x 6" 1/16" x 6" 1/16" x 6" 1/16" x 6" BLENDED REPAIRS Very Small Very Small Very Small Very Small Very Small Very Small Very Small Very Small

(1) Outside components will be different size to allow for (4) Sapwood is permitted in Rotary only, unless otherwise edge trim loss and certain types of matching. specified. (2) Combined average number. (5) Blending 16 (3) If Slip, Plank, or Random matched. (6) Sapwood is allowed, but percentage must be agreed upon between buyer and seller. Rev. 6/21 RITE Slide WOOD DOOR

WOOD DOOR FACE TYPE ELEVATION

FLUSH FLUSH WITH FLUSH WITH FULL GLASS HALF GLASS NARROW VISION KIT

FULL GLASS FLUSH WITH WITH MUNTIN BAR LOUVER

17 Rev. 6/21 RITE Slide WOOD DOOR

FACTORY INSTALLED GLASS

1/4" TEMPERED (CTG) Glass Description 1/4" Clear tempered impact safety rated glass • Quality Rating: Q3, ASTM C1036-06 • Thickness: 1/4" Nominal • Warranty: 1 Year Limited • Includes: Glazing tape and setting blocks as required • Impact Safety Rating: CPSC 16CFR1201, CAT I and CAT II

FOR INFORMATION CALL 218-828-6256 18 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

8” FULL GLASS DOOR

6”

Coutout Size • Mimimum stile width: 5" from edge of door to cutout • Minimum rail width: 5" from edge of door to cutout • Optional midrail available Mouldings • 6F (straight flush) profiles are standard • 2F (beveled flush)profiles optional 12” • All mouldings are sized for installation with 1/4" safety tempered. Moulding and lite kits are factory SPECIFICATIONS attached. • Mouldings must be installed using 3/32" glazing Maximum Size Faces tape on both sides of the glass and must be fastened • 4'0" wide x 9'0" high • Two ply veneered , 1/8" every 8" on center using 3d finish nails. Thickness thick, with face veneer thickness Glazing Material of 1/50" minimum at 12% moisture • 1-3/4" only content. • 1/4” clear tempered safety glass (standard) Stiles • Other options available upon request • Laminated hardwood construction Warranty or veneer banded. • When finished and installed per manufacturers specifications this product carries a full lifetime warranty against manufacturer defect on interior applications. The product is not warranted for exterior application in any event. Exterior applications are those which expose a door to extremes of temperature and/or humidity regardless of the physical placement.

FOR INFORMATION CALL 218-828-6256 19 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

GLAZING OPTIONS

Beveled Flush Straight Flush Moulding Moulding

STANDARD MINIMUMS

• All cutouts for metal or wood vision panels must be a minimum of 5" (152 mm) from the edge of the door and/or other cutouts for louvers, locks, closers or other hardware.

• This 5" (152 mm) distance must be maintained or the fire label and warranty will be voided. For non-fire rated doors, the distance may be decreased to 5" (127 mm). Less than 5" (127 mm) may affect the warranty.

• Using a 10" (254 mm) margin between the edge of the door and the edge of any cutout near the lock area will eliminate most label and warranty conflicts. Sound degradation occurs with glazing; assembly will not meet ratings tested.

FOR INFORMATION CALL 218-828-6256 20 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

WOOD MOULDINGS

1/4”

11/16”

11/16”

6F

11/16”

1/8” 1/2”

2F

FLUSH MOULDING FOR LITES

• Matching specie to door face veneer for Premium grade. 6F - Straight Flush Mouiding 2F - Beveled Flush Moulding

• Wire Brad — Flush Moulding is factory attached.

• 1/4” Glazing — Glazing materials are included.

• Beveled back for glazing compound or 1/16" tape

• Lites — Order size — visible glass size| Cutout size = visible glass + (2 x moulding profile) Glass size = cutout - 1/4" wide - 1/4" high

Width of glass moulding may vary depending on glass thickness

FOR INFORMATION CALL 218-828-6256 21 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

LOUVER UNITS

3/32"

3/8"

7/16"

6W

V-SLAT WOOD LOUVER

• L100 Wood Non – Vision Louver Unit – 3/4" wide, 33% free air movement. Matching specie to door face veneer for Premium grade. For use with 1-3/4" thick doors. Specify louver size the same as cutout size. 1-3/8" thick doors require framed louvers. Louvers may not be installed in 20 minute fire doors. 6W – Flush Moulding 7/16" wide x 3/8" thick, 3/32" radius

• Wire Brad – Mouldings are factory attached. Louvers are factory installed as standard. Louvers may be field installed as an option.

• Field installation may require the use of glazing tape for proper fit.

FOR INFORMATION CALL 218-828-6256 22 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

BEVEL CHART

DOOR STILE

0° NO BEVEL

FOR INFORMATION CALL 218-828-6256 23 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

COLORS

RITE Slide offers 12 standard semi-transparent prefinish COLORS AVAILABLE colors or an unfinished door. In addition, we perform • Alpine AL18

custom color matching for projects that require a specific • Clear CL18 color. • Chocolate CH18

If you have a project that requires a unique color, simply submit a sample to us • Serengeti SE18 and we will match it. Since the natural coloration and grain characteristics of • Grassland GR18 wood change with the application of a clear topcoat and/or semi-transparent stain, the term “color match” is easy to misunderstand. • Oasis OA18

In order to make sure we provide a color that meets your project’s • Riverstone RI18 * requirements, once we formulate a stain color in line with your sample, we’ll send you a set of samples that represent the “blend” or range of tone, color, • Ravine R A18 and grain that may be present in the finished product. Upon review and • Savanna SA18 approval of the complete set, simply provide your agreement of the color range, and we will proceed forward with your doors. • Onyx ON18

• Timber TI18

• Wheat WH18

* Riverstone is not availabe for Mahogany doors

FOR INFORMATION CALL 218-828-6256 24 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

FACTORY FINISH

Environmental awareness and TEST RESULTS understanding the need for door opening Premium Grade Topcoats solutions that provide beauty, durability, TEST RITE SLIDE TR-6 TR-4 and reliability influenced RITE Slide’s Vinegar 5 5 5 selection of a unique factory finish system. Lemon Juice 5 5 5 Orange Juice 5 5 5 Combining the use of non-solvent based modified Catsup 5 5 5 acrylic stains and finish topcoats, the water-borne materials we use provide richly colored and highly Coffee 5 5 5 protective finishes. Additionally, our multi-step Olive Oil 5 5 5 automated process results in virtually no waste and low energy demand for UV curing. Our successful Boiling Water 5 5 5 integration of stain and topcoat materials with a Polish Remover 5 5 4 technologically advanced process consistently results Household Ammonia in architectural wood doors that have the appearance 5 5 5 of fine furniture. Isopropyl Alcohol 5 5 5 RITE Slide's finish system is newer technology than Wine 5 5 5 what is defined by TR-4 and TR-6. In order to confirm Windex 5 5 5 exceptional performance of our finish system, testing was completed to compare performance against 409 Cleaner 5 5 5 these two common finishes. As detailed in the table Lysol 5 5 5 below, RITE Slide's finish performed better than TR-6 and TR-4 in all categories. Combine this durable 33% Sulfuric Acid 5 5 5 performance with our environmentally friendly 77% Sulfuric Acid 4 4 4 process and RITE Slide is proud to provide pre- finished doors to you. Gasoline 5 5 5 Murphy’s Oil Soap™ 5 5 5 Vodka 100 Proof 5 5 5 10% Tri-Sodium Phosphate 5 5 5 Wear Index 5 5 5 Cold Check 5 5 5 Adhesion 5 5 5 5 = Excellent 4 = Very Good 3 = Good 2 = Fair 1 = Poor

FOR INFORMATION CALL 218-828-6256 25 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOR DOOR

Red Oak

FOR INFORMATION CALL 218-828-6256 26 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

White Oak

FOR INFORMATION CALL 218-828-6256 27 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOR DOOR

Cherry

FOR INFORMATION CALL 218-828-6256 28 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOR DOOR

Natural Birch

FOR INFORMATION CALL 218-828-6256 29 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOR DOOR

White Birch

FOR INFORMATION CALL 218-828-6256 30 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOR DOOR

White Maple

FOR INFORMATION CALL 218-828-6256 31 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOD DOOR

Walnut

FOR INFORMATION CALL 218-828-6256 32 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide WOOR DOOR

Mahogany

FOR INFORMATION CALL 218-828-6256 33 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 6/21 RITE Slide OPERATIONAL HARDWARE

ADA SURFACE PULLS

Ladder Pull

(S3305)

U-Shape Pull

(S3110) Material • Stainless steel Shapes • Ladder style (S3305) • U-Shape style (S3110) • Square shape style (S3010) Lengths • 18" CTC (standard) • Other sizes available upon request Orientation • Single (S) Square Shape Pull • Back to back (B)

(S3010) Finishes • Satin stainless (standard) • Satin stainless with MicroShield • Custom color match available upon request

FOR INFORMATION CALL 218-828-6256 34 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 8/21 RITE Slide OPTIONAL HARDWARE

MORTISE DEADLOCK

Mortise Deadlock • Standard 1-3/4” door thickness • 2-3/4” backset only • Non-handed • Thumbturn : 5x5mm square • Lockcase with deadbolt (no edge pull) • Deadbolt with 1” throw • Self-retracting hook with non-marring latch bolt • Faceplate (2mm thick) • Vertically adjustable strike plate Material • Lock case: heavy steel • Deadbolt: brass and stainless steel • Faceplate and strike: stainless steel or brass • Cylinder by others Functions • S5340 privacy with emergency release • Deadbolt operated by inside thumbturn or outside emergency release coin turn • Occupany indicator included; available without occupancy indicator upon request S5340 Privacy with S5350 Entry with • S5350 entry with single cylinder Emergency Release Single Cylinder • Key outside or thumbturn inside retracts deadbolt • Cylinder by others Thumbturn Options • Thumbturn on escutcheon only • Thumbturn on escutcheon with release Finishes: Thumbturn on Thumbturn on • Satin stainless (Standard) Escutcheon Only Escutcheon with Release • Satin stainless with MicroShield • Custom color match available upon request

FOR INFORMATION CALL 218-828-6256 35 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 8/21 RITE Slide OPERATIONAL HARDWARE MORTISE LOCK Mortise Lock • Standard 1-3/4” door thickness • 2-3/4” backset only • Handed - must specify • Thumbturn spindle: 5 x 5mm square • Lockcase with deadbolt (no edge pull) • Deadbolt with 1” throw • Self-retracting hook with non-marring latch bolt • Faceplate (2mm thick) Outside Inside Outside Inside Outside Inside • Vertically adjustable strike plate

S9540/S9640 S9550/S9650 S9570/S9670 Material • Lock case: heavy gauge steel • Deadbolt: brass and stainless steel • Faceplate and strike: stainless steel or brass • Cylinder by others

Functions (S9600 are self-latching devices) • S9610 passage • Bolt auto-latches • Outside and inside levers are always unlocked and retract bolt • S9540 or S9640 privacy with emergency release • Deadbolt retracted by either thumbturn or handle (inside) or emergency coin release (outside) Outside Inside Outside Inside • Outside lever is dummy function • Occupany indicator included; available without S9610 S9680 occupancy indicator upon request for S9540 only • S9550 or S9650 entry with single cylinder 221 Aurora 105 Frankfurt 102 Munich • Deadbolt retracted by either thumbturn or handle LeverAurora FrankfurtLever MunichLever (inside) or key (outside) • Outside lever is dummy function (221) (205) (202) • Cylinder by others • S9570 or S9670 classroom with single cylinder • Deadbolt retracted by handle (inside) or key (outside) • Outside lever is dummy function • Cylinder by others • S9680 storeroom • Bolt auto locks • Outside lever is always locked unless unlocked with key; re-locks when key is removed • Inside lever retracts bolt for emergency egress Sunrise Twilight • Cylinder by others (243) (244) Lever/Trim Options: • Aurora (221) • Sunrise (243) • Frankfurt (205) • Twilight (244) • Munich (202)

Finishes: • Satin Stainless (Standard)

36 243 Sunrise 244 Twilight Lever • Satin stainless with MicroShield Rev. 8/21 Lever • Custom color match available upon request RITE Slide ACCESSORIES

SEALS

(2) Single Fin Gaskets Part #S9GR

Non Acoustic Series: S9GR, P2GR, 369AP4BL Acoustically Rated Series (STC-34)*: S773, S9GR, S369APK773BL

S9GR • Seal is extruded from high-temperature silicone; effective between -58 degrees (F) (1) Pile Gasket and 450 degrees (F) (1) Trailing Edge Part #P2GR • Single-fin gasketing design effectively blocks light and sound from infiltrating a room Gasket Assembly • Designed to slide into aluminum extrusion Part #369AP4BL • Impervious to mold and mildew P2GR • Polypropylene pile brush gasket • Designed to slide into aluminum extrusion • GREENGUARD Gold Certified 369AP4BL • Polypropylene pile brush gasket with aluminum retainer (1) S773 Gasket • GREENGUARD Gold Certified Part #S773BL_ S773 • Adhesive perimeter seal is extruded from high-temperature silicone; effective between -58 degrees (F) and 450 degrees (F) • Triple-fin gasketing design effectively blocks light and sound from infiltrating a room • Tested and approved under UL 1784 for smoke and ASTM E90 and BS EN ISO 140-3 for sound control • Impervious to mold and mildew • Acrylic pressure sensitive adhesive back creates long lasting bond to surfaces • GREENGUARD Gold Certified 369APK773BL • Seal is extruded from high-temperature silicone; effective between -58 degrees (F) and 450 degrees (F) (1) Trailing Edge Gasket Assembly • Triple-fin gasketing design effectively blocks light and sound from infiltrating a room Part #369APK773BL • Supplied with aluminum extrusion mounting bar which is surface applied with fasteners • GREENGUARD Gold Certified 37 *Complete assembly lab tested with engineered core flush wood door sealed in place Rev. 3/20 RITE Slide ACCESSORIES SLIDING TRACK HARDWARE

(2) Hanger Body Part # 57J250JBODY (2) In-Track Stop Part # HHS-4800

(2) Soft Close Device Part # SC-0418 (1) Activator Stud with Mounting Plates Part # 48-4800 Sliding Track Hardware • Hanger Body made of 316 stainless steel pendent bolt and four ball bearing nylon wheels rated for doors up to 550 pounds each • 304 Stainless Steel Activator Stud • 304 Stainless Steel Hanger and Activator Mounting (1) Activator Mounting Plates Plates Part # 48-4800 • Two 304 Stainless Steel In Track Stops with Rubber Bumper • Soft Close Device - Two devices per assembly: closed and open positions - Facilitates quiet and controlled operation even under aggressive use (2) Hanger Mounting Plates - Reduces pinch points and risk of accidental injury Part # 57-4800-APRON - Reduces wear and tear on door and hardware - Robust and highly durable design

FOR INFORMATION CALL 218-828-6256 38 OR VISIT ASSAABLOYSERVICECENTERS.US Rev. 3/20 RITE Slide ACCESSORIES AUTOMATIC DOOR BOTTOM

(1) Automatic Door Bottom

Non Acoustically Rated Part #440APK_

(2) Door Bottom End Plates with Fasteners Part # K448

Acoustically Rated Part #STC440APK_

Automatic Door Bottom (1) Bottom Door Guide with Fasteners Non Acoustic - Part #440APK_ Part # 102-4800 Acoustic - Part #STC440APK_ • Fully mortised • Aluminum case which surrounds a movable drop-bar seal and integral channel for bottom door guide • Drop-bar seal is actuated by a plunger which contacts the C-Channel when door is in closed position- Seal is black PemkoPrene insert • Black e-coated steel end plates • Testing certificates - Sound Tested to ASTM E90 - BHMA Certified - Smoke Tested to UL1784 Bottom Door Guide FOR INFORMATION CALL 218-828-6256 • 304 Stainless Steel and nylon 39 OR VISIT ASSAABLOYSERVICECENTERS.US • Surface mounted to face of frame Rev. 3/20