Earth Bonding Tapes and Earth Bonding Clamps Earthing Bonds Tape and Earthing Bond Clamp
BONDS & CLAMPS
Tower Earth Clamp Material - Gunmetal / Brass These are suitable for bonding copper cable or wire to steel structures.
Cond. Size Channel Bolt Conductor Product mm2 Thickness Size Material Code Min. Max. mm
16 70 10 M10 Copper E06-TEC -16 70 120 10 M12 Copper E06-TEC -70
25 50 10 M10 Copper E06-TEC -25 25 50 10 M10 Aluminium E06-TEC -25A
B Bond Material - Gunmetal / Brass / Aluminium These are used for bonding tape to steel structures.
Max. Tape Bolt Size Conductor Product Width mm Material Code
25 M10 Copper E06-BB -C25 25 M10 Aluminium E06-BB -A25
Rain Water Pipe Bond Material - Gunmetal / Brass These are suitable for bonding tape to Rain Water Pipes, Handrails etc.
Max. Tape Bolt Size Conductor Product Width mm Material Code 25 M 10 Copper E06-RWP - C25 25 M 10 Aluminium E06-RWP - A 25 Watermain Bond Material - Gunmetal / Brass These are used for bonding copper tape to Water main pipes.
Max. Tape Conductor Product Width mm Material Code 25 Copper E06-WB - 25
Earth Boss Material - Body - Mild Steel Thread Product Length Diameter Fittings - Stainless Steel Size Code The Earth boss is designed to M10 40 mm 40 mm E06-EB -01 provide an earth point on a steel structure.The boss is M10 50 mm 50 mm E06-EB -02 welded into place.
Water Pipe Clamps SIZE Product Coder Material - Gunmetal 1/2" - 1" E06-WPC-1 1" - 2" E06-WPC-2 2" - 4" E06-WPC-4 4" - 6" E06-WPC-6
AMIABLE IMPEX. Email – [email protected] Tel. +91-22-28933996 URL – www.amiableimpex.com
Page 1 of 5
Electrical bonding is the practice of intentionally electrically connecting all exposed metallic noncurrent items in a room or building as protection from electric shock. If a failure of electrical insulation occurs, all bonded metal objects in the room will have substantially the same electrical potential, so that an person of the room cannot touch two objects with significantly different potentials. Even if the connection to a distant earth/ground is lost, the person will be protected from dangerous potential differences.
In a building with electricity it is normal for safety reasons to connect all metal objects such as pipes together to the mains earth to form an Equipotential zone. This is done in the developed countries like U.S.A, U.K etc because many buildings are supplied with a single phase supply cable where the neutral and earth conductors are combined. Close to the electricity meter this conductor is divided into two, the earth terminal and the wire going to the neutral bus bar in the consumer unit. In the event of a break in a neutral connection this earth terminal provided by the supply company will be at a potential (relative to the true earth) which is the same as the live wire coming to the home.
Examples of articles that may be bonded include metallic water piping systems, gas piping, airplanes, ducts for central heating and air conditioning systems, and exposed metal parts of buildings such as hand rails, stairs, ladders, platforms and floors.
A person touching the un-earthed metal casing of an electrical device, while also in contact with a metal object connected to remote earth, is exposed to an electric shock hazard if the device has a fault. If all metal objects are connected together, all the metal objects in the building will be at the same potential. It then will not be possible to get a shock by touching two 'earthed' objects at once.
Bonding is particularly important for bathrooms, swimming pools and fountains. In pools and fountains, any metallic object (other than conductors of the power circuit) over a certain size must be bonded to assure that all conductors are Equipotential and do not provide a hazardous conductive path. Since it is buried in the ground, a pool can be a better ground than the electric panel ground. With all the conducting elements bonded, it is less likely that electric current will find a path through a swimmer. In concrete pools even the reinforcing bars of the concrete must be connected to the bonding system to ensure no dangerous potential gradients are produced during a fault.
How the Earth Protects
In a system with a grounded neutral, connecting all non-current-carrying metallic parts of equipment to earth ground at the main service panel, will ensure that current due to faults (such as a "hot" wire touching the frame or chassis of the device) will be diverted to earth. In a TN system where there is a direct connection from the installation earth to the transformer neutral, earthing will allow the branch circuit over-current protection (a fuse or circuit breaker) to detect the fault rapidly and interrupt the circuit.
In the case of a TT system where the impedance is high due to the lack of direct connection to the transformer neutral, an RCD (Residual-Current Device, sometimes known as a Residual Current Circuit Breaker or Ground Fault Circuit Interrupter) must be used to provide disconnection. RCDs are also used in other situations where rapid disconnection of small earth faults (including a human touching a live wire by accident, or damage) is desired.
Field Names: Earth bond, Earthing bonds, Earth bonding, Earth bonds, Bonding and Earthing, Electrical earth bonding, Bond clamp, Earthing bond, Bonds and Clamps, Water main Pipe Bond, B Bond, Rwp Bond, Tower Earth Clamp bond, Double Plate, Tower Earth Clamp Single Plate, Earth Boss
Our Other products in Earthing
AMIABLE IMPEX. Email – [email protected] Tel. +91-22-28933996 URL – www.amiableimpex.com
Page 2 of 5
S. no. INDEX
I EARTH ROD & FITTINGS 01 COPPER BONDED GROUNDING ROD / EARTH ROD 02 DRIVING STUD 03 COUPLER 04 SOLID COPPER ROD & FITTINGS 05 MECHANICALLY COPPER CLADED GROUNDING ROD 06 GALVANISED STEEL EARTH ROD 07 STAINLESS STEEL UNTHREADED ROD 08 CROSS EARTH ROD – WITH FLAG / WITHOUT FLAG 09 T - EARTH ROD
II EARTH PLATES 10 COPPER BONDED & SOLID BONDED EARTH PLATES 11 LATTICE COPPER
III FITTINGS 12 EARTH ROD CLAMP 13 O CLAMP 14 ROD TO TAPE CLAMP – A TYPE 15 ROD TO CABLE CLAMP – G TYPE 16 ROD TO CABLE LUGS CLMAP – B TYPE 17 COMBINATION CLAMP 18 BRASS CABLE CLIP
IV U BOLT CLAMP 19 U BOLT - ROD CLAMP 20 U BOLT - ROD TO TAPE CLAMP 21 U BOLT - ROD TO CABLE CLAMP - GUV 22 U BOLT - ROD TO CABLE CLAMP - SCE 23 U BOLT FOR RIGID PIPES & CABLES - PUB
V CROSS CLAMPS
VI BONDS AND CLAMPS 24 B BOND 25 TOWER EARTH CLAMP 26 WATERMAIN BOND 27 RAINWATER PIPE BOND 28 EARTH BOSS
VII FLAT TAPE SYSTEMS 29 TAPER POINTED ROD 30 AERIAL ELEVATION ROD 31 MULTIPLE POINT 32 TERMINAL SADDLE BASE 33 AERIAL ROD + MULTIPLE POINT + TERMINAL BASE 34 AERIAL ROD + TERMINAL BASE
VIII TAPE FITTINGS 35 TAPE CLIP 36 DC TAPE CLIP 37 SQUARE TAPE CLAMP
AMIABLE IMPEX. Email – [email protected] Tel. +91-22-28933996 URL – www.amiableimpex.com
Page 3 of 5
38 OBLONG TEST CLAMP 39 PLATE TYPE TEST CLAMP / TEST BOND 40 SCREW DOWN TEST CLAMP 41 GLAZING BAR HOLDFAST 42 BACK PLATE HOLDFAST STEM 43 ROD TO TAPE COUPLING & CABLE TO TAPE JUNCTION CLAMP
IX BI – METALLIC CONNECTOR
X CAST GROUNDING PLATE / EARTH PLATE
XI CIRCULAR CONDUCTOR SYSTEM 44 ONE HOLE CABLE CLIP 45 HEAVY DUTY CAST CABLE SADDLE 46 TEST CLAMP 47 SQUARE CONDUCTOR CLAMP 48 TEE CLAMP 49 SIDE MOUNTING ROD BRACKET 50 JOINTING CLAMP 51 UNIVERSAL CABLE CONNECTOR 52 RE - BAR CLAMP 53 METAL WORK BONDING CLAMP 54 STRAIGHT SET SCREW TYPE CABLE SOCKET 55 AIR TERMINAL BASE CABLE 56 FLAT SADDLE -C 57 ANTI-VANDAL CONDUCTOR GUARD 58 COMB CLAMP 59 NITRO CLIP – SNAP ON HOLDER 60 UNIVERSAL CLAMP 61 SADDLE CLAMP WITH BASE 62 CLAMP CONNECTOR – STRAIGHT & 90 DEGREE 63 MECHANNICAL CONNECTOR– STRAIGHT & 90 DEGREE 64 T RAIL + BASE , RAIL + BASE , RAIL 65 ROOF CONDUCTOR HOLDER WITH NITRO CLIP 66 PUDDLE FLANGE 67 FLOOR GROUNDING RECETACLES 68 EQUIPOTENTIAL BONDING BARS 69 EARTH BARS & DISCONNECTING LINKS 70 INSULATOR
XII CONDUCTORS 71 BARE COPPER TAPE 72 PVC COVERED COPPER TAPE 73 BARE ALLUMINIUM TAPE 74 COPPER BUS BAR 75 BARE SOLID CIRCULAR CONDUCTOR 76 BARE STRANDED COPPER CONDUCTOR 77 PVC COVERED STRANDED COPPER CONDUCTOR 78 FLEXIBLE BRAID BOND 79 FLEXIBLE COPPER BRAID XIII ESE SYSTEMS (EC – SAT / ‘ T ’ SERIES
XIV FASTNERS & FIXINGS
AMIABLE IMPEX. Email – [email protected] Tel. +91-22-28933996 URL – www.amiableimpex.com
Page 4 of 5
Regd. Office - AMIABLE IMPEX. 101/A, Surya Darshan, Pai Nagar, Borivali(W), Mumbai – 400092. India. Phone: 022-28933996 / 022-28957101 Fax: 022-28957102
Workshop - AMIABLE IMPEX Plot No.495, Rohitvas, Motapondha, Vapi-396191 Gujarat,India.
MAULIK SHAH E-mail: [email protected] Mob :+ 91- 9594899995
UJJWAL SHAH Phone: +91- 9820733979 Email: [email protected]
Website: www.amiableimpex.com
AMIABLE IMPEX. Email – [email protected] Tel. +91-22-28933996 URL – www.amiableimpex.com
Page 5 of 5