,·

., ::,: ' ·- ~~~-:_!.:·:· (·. ·r~·.-_!.~1~ ,.,..._ . .· -"·-l- :~ . --~~ I.;

;!.'1- "- .·, ; ·' •: ... 'r ' I . -~ ---·:- '' ' ·( J. W~ATHER5TRlP l;r ,.. j -....·•'"'-·. t W:ORK .-" ~: i -' " ,.__ L.;...;...;...~-----:-- ...-,-._ ---~-.;...;,..=--~ ..... ·-

1i •. j 1

I I!

-; ·~ ... ', ;.::!'. :il'>- ,, -· .... ,_. l '. , :STANLEY New-Britain, Conn., U.S. A. -·- j . '

...... :_...,_'· ------~t ... 1 (STANLEY~ .:) ~ Weatherstrip Cuts Made With Stanley Planes Stanley Weatherstrip Tools make all ... common and special cuts easily and quickly. The majority of weatherstrip manufacturers recommend them as the most practical tools available.

Meeti~g Rail Cut Made with Stanley Pla.ne No. 378 - Certain types of weatherstripping re­ quire two· rabbet cuts (as illustrated) whose shoulders bear a definite rela­ tion to each other. \Vith Stanley Rab­ bet No. 378, it is possible to lo­ cate the two positions- accurately, and to· repeat their positions on each sash. Other types. of. weatherstripping require Meeting Rail Rabbet Cuts a single rabbet 'cut (as illustrated). No. Made with Plane No. 378 378 Plane cuts the entire width of thi~. rabbet w:ith one pass . . Cut Made with Stanley Plane No. 248A The illustration shows a groove cut for the rib of weatherstrip. This cut can be made at any location on the sash to any depth up to ¥s inches. The seven cut­ ters regularly furnished will cut 7i, %2, Groove Cut Made o/!s, %2, ~. %s, and % inch width cuts. with Plane No. 248A

Rabbet Cut on a Door Made with Stanley Plane No. 78 Installing weatherstripping on the lock jamb and head of a door requires two cuts Ys inch wide (as illustrated). Stanley Plane No. 78 makes these cuts either right or left hand, with slight adjustments. This plane can be reversed on the end of a door to prevent the Ra,bbet Cut Made on Door from splitting. with Plane No. 78 (STANLEY)

No. 248A. Plow Plane ... Stanley Planes for Weatherstrip Work These are the Stanley Planes which can be used to make rabbet and plow cuts for the rib, hook and flat strips on practically all types of metal weatherstripping. Rabbet Plane Rabbet Plane Used to make rabbet cuts ~ in. wide Used to make the rabbet cuts on the ' on the lock jamb and head of a door sash meeting rail and for all rabbet for weatherstripping. Using the Plane work within its capacity. with depth gauge, make a .cut ~ in. Furnished with a lo/J.s in. cutter, a wide first to proper depth. Then adjust with stop collars; a R H and Plane and make Ys in. cut from edge L H Depth Gauge, and a wide Depth of door. (See illustration showing rab­ Gauge that can be used on either side bet cut on door on opposite page.) of the plane for cutters wider than ~ This Plane can also be used for other in. rabbeting jobs in connection with win­ Cutters-llfls in., ~ in., ¥8 in. and 1 dows. in. wide can be furnished for 50¢ each. No. No. 78 1?/, in. Cutter, 8}:4 in. long 378 8 in. long Grooving Plane Other Stanley Tools For A plane especially de s i g n e d for Weatherstrip Work weatherstrip grooving and for all plow Side Rabbet Plane No. 79, work within their limits. Fitted with a Plane No. 7, Hammer No. 53-7 oz., Depth Gauge· and an Adjustable Fence. Prick Punch No. 9B, Pin Punch No. The following seven cutters are fur­ 647, No. 20-6 in., Bit Brace No. nished-%, %2, o/J.s, %2 }:4, %s and ~ 945, No. 139, No. inches wide. 50-§i in., Set No. 11~-o/64 in., No. Rule No. 106, Screw Driver No. 20-4 248A 7 Cutters, 9?/, in. long in., No. 700.