7Th EASN International Conference on Innovation in European Aeronautics Research Final Agenda Day 1 Time Tuesday, September 26Th, 2017 8:00 18:30 Registration

7th EASN International Conference on Innovation in European Aeronautics Research Final Agenda Day 1 Time Tuesday, September 26th, 2017 8:00 18:30 Registration

Welcome & Introduction 9:30 9:40 by the Conference Chairmen Prof Zdobyslaw Goraj and Prof Spiros Pantelakis

"Opportunities and challenges for research in aeronautics within H2020" 9:40 10:10 K ey-Not e Speech by Mrs Clara de la Torre | Direct or for Transport , DG Research & I nnovat ion, European Commission

AULA Room “Design & Research Philosophy in the Environment of Global Competition” 10:10 10:40 K ey-Not e Speech by Dr Marian Lubieniecki | M anaging Direct or and Sit e Leader at GE Engineering Design Cent er ( I nst it ut e of Aviat ion)

“Aerospace Europe: strengthening collaboration & knowledge dissemination” 10:40 11:10 K ey-Not e Speech by Mr Christophe Hermans | President of t he Council of European Aerospace Societ ies ( CEAS)

11:10 11:40 Coffee Break Room ALPHA FOXTROT BRAVO IKAR AULA CHARLIE DELTA PAPA Session No 12.3 13.1 1.5 2.3 5.1 5.3 1.4 Support Actions for Coordinating Research in the Innovative Multifunctional Materials For New Trends in Structural Health Monitoring of Session Title Innovative Approaches in ATM / ATC Innovative composite structure in aircraft design Aeroelasticity & Unsteady Flows Structural Aspects in Aircraft Design Field of Aeronautics & Air Transport Aeronautics Aircraft Dr Apostolos Chamos & Prof Vicenzo Tucci & Dr Jan Pfaff Prof Maciej Bossak Prof Zdobyslaw Goraj Mr Alexander Shanygin Dr Helge Pfeiffer Session Chair(s) Ms Irene Pantelaki Prof Liberata Guadagno University of Stuttgart Institute of Aviation Warsaw University of Technology TsAGI KU Leuven EASN-TIS University of Salerno

ADS-B based Air Traffic Performance Assessment: The self-healing mechanism of micro-capsules CATER project overview presentation Analysis of the possibility of implementing advanced Smart skins for structural health monitoring in aerospace Develop New Metrics for Measuring ANSPs and airlines Turning Icaré II into a test platform – will the embedded into aeronautic structural polymers and Aircraft horizontal tail plane (HTP) skin cover buckling Mr. Giuliano D'Auria composite technology for small enterprises on the applications [155] 11:40 12:00 Flight Efficiency [68] modifications affect aeroelasticity? [85] composites: A feasibility study [16] analysis using finite element techniques [15] example of the ilx-27 helicopter main rotor blades [178] Jan Smilek, Ludek Janak, Ondrej Rubes, Zdenek CAPPADOCIA project overview presentation Damian Ferrer, Javier López, Manuel Polaina, Marcos Andreas Strohmayer Panagiota V Polydoropoulou, Christos V Katsiropoulos, Juan Luis de la Gándara Konrad Jerzy Kozaczuk Hadas Mr. Fabien Marty Sanz, Pablo Sánchez Andreas Loukopoulos, Spiros G Pantelakis

Highly non-linear sensing devices in structural health An ATCo Psychological Model with Automation [79] Experimental investigation of the curing behaviour of Development of self-healing mechanisms in A Simulation Investigation of Helicopter Ground OPTICS - Are we doing the right aviation safety Victor-Fernando Gomez Comendador, Patricia Lopez fibre composite structures with snap-cure polymer aeronautical vehicles [158] monitoring of aircraft [230] GVT atypical approach of ICARE 2 [80] Resonance Phenomenon [23] 12:00 12:20 de Frutos, Eva Puntero Parla, Elena López Ballestín, José Elisa Calabrese, Pasquale Longo, Annaluisa Helge Pfeiffer, Hans Sekler Sevilia Sunetchiieva, Christ research? [18] systems [248] Wiesław A. Krzymień, Sławomir Cieślak Jarosław Stanisławski Joram Verstraeten, Barry Kirwan Juan Cañas, Pedro Ferreira, Rosa Arnaldo Valdçes, Rafał Stanik, Michael Müller, Albert Langkamp, Maik Mariconda, Marialuigia Raimondo, Carlo Naddeo, Glorieux, Martine Wevers Alvaro Rodriguez Sanz Gude Luigi Vertuccio, Liberata Guadagno

Nanoscale Electrical Characterization by Tunneling AFM Conflict-resolution algorithms for separation minima (TUNA) and Flammability Behaviour of a New Development of rational hybrid fuselage structure for Defect detection in vibrating structures using features of A perspective on the use of thin ply laminates in the Flutter analysis of icaré II XXL - influence of auxiliary RADIAN project overview presentation definition of RPAS in a non-segregated airspace [367] Aeronautical Multifunctional Graphene/POSS Epoxy prospective civil aircraft [88] nonlinear ultrasonic modulation [231] 12:20 12:40 Javier Alberto Pérez Castán, Fernando Gómez aeronautic industry: challenges and opportunities [273] engines on wing tips [55] Alexander Nikolaevich Shanygin, Evgeny Arkadyevich Dr. Gerhard Pauly Resin [169] Sevilia Sunetchiieva, Helge Pfeiffer, Martine Wevers, Comendador, Rosa Arnaldo Valdés, Lara Hernández Giuseppe Catalanotti Wojciech Celestyn Chajec Dubovikov, Ivan Olegovich Kondakov, Victor Marialuigia Raimondo, Liberata Guadagno, Carlo Christ Glorieux Gila, Jaime Torrecilla Puebla Naddeo, Vito Speranza, Khalid Lafdi, Leila Bonnaud, Pavlovich Fomin Oltea Murariu, Philippe Dubois

12:40 - 13:00 Innovation concepts for the transport of passengers and cargo for short distances in all weather conditions based on autonomous platforms [129] Applications of composites materials for structural parts Development of a monitoring technique for the detection Krzysztof Stanisław Szafran, Ireneusz Kramarski AFP Composite Wing Skin Development for Commuter Comparison of a flutter calculation methods based on and quantiﬁcation of water and ice in the fuel tanks of RINGO project overview presentation of aircraft with self-diagnosis capability [307] 12:40 13:00 13:00 - 13:20 Category Aircraft [199] GVT results [52] Giovanni Spinelli, Luigi Egiziano, Patrizia Lamberti, an aircraft [232] Dr. Reiner Suikat Procedural Wind-Based Reduction of Separation on Final Malgorzata Zalewska Wojciech Celestyn Chajec Raffaele Raimo, Vincenzo Tucci, Liberata Guadagno, Michael Stamm, Helge Pfeiffer, Christ Glorieux, Andy Approach: Design, Safety Assessment and Application to Luigi Vertuccio Vanaerschot, Martine Wevers Vienna Airport [339] Ivan De Visscher, Frederic Rooseleer, Vincent Treve, Günther Borek

13:00 14:30 Lunch Break 14:30 15:00 Room: AULA "EREA – a major contributor to the implementation of ACARE’s SRIA" Room ALPHA FOXTROT BRAVO IKAR AULA CHARLIE DELTA PAPA Session 12.1 12.5 12.6 2.3 11.1 5.3 5.1 Innovative Multifunctional Materials For Session Title FUTURE Sky Session RADIAN Session - AERO-UA EFFICOMP Session Aeroelasticity & Unsteady Flows Modelling and Simulation of Flight Physics - Part I Structural Aspects in Aircraft Design Aeronautics Prof Vicenzo Tucci & Mr Josef Kaspar Mr Gerard Pauly Dr Jacques Cinquin Prof Zdobyslaw Goraj Prof Shia-Hui Peng Mr Alexander Shanygin Session Chair(s) Prof Liberata Guadagno VZLU Fraunhofer IFAM AIRBUS Group Innovation Warsaw University of Technology Swedish Defence Research Agency, FOI TsAGI University of Salerno

Facilitating Collaboration in ReseArch and Development Development of joints for reliable connection of structures to Foster Further Innovation in European AeroNautics - H2020 Project IMAGE: Innovative Methodologies and Assessment of Hybrid Heating for Curing of CFRP Static aeroelastic behavior of composite missile fin with with lattice and semi-monocoque layouts [89] Future Sky – Aviation Research for Tomorrow Technologies for Reducing Aircraft Noise Generation and Development of adhesives, for aircraft structures [200] 15:10 15:30 RADIAN [251] Structures [130] interlaminar and intralaminar damage [59] Evgeny Arkadyevich Dubovikov, Alexander Josef Kaspar Thilo Schönfeld, Miriam De Angelis, Thilo Schönfeld, Emission Luigi Vertuccio Philipp Hilmer Ozge Ozkaya, Altan Kayran Nikolaevich Shanygin, Andrey Vladimirovich Chernov, Angela Vozella, Irene Pantelaki, Tõnis Eerme, Igor Shia-Hui Peng, Wenchao Huang Danil Yuryevich Fomin, Yury Sergeevich Mirgorodsky Rybalchenko, Roland Gurály, Adrian Huta, Martin Spieck

Metal-composite joints based on mechanical Development of new processes for aerospace structural Numerical Studies of the Active Flow Control on the Wing Multi-Functional Nanotechnology Integration For Aircraft safety model development and integration in a Facilitating Collaboration in ReseArch and Development Piston-electric propulsion system as reliable alternative metamaterials for prospective pro-composite airframes composite part manufacturing with affordable cost and Tip Extension Aeronautical Structures Performance Enhancement [244] 15:30 15:50 risk observatory [25] to Foster Further Innovation in European AeroNautics - for traditional piston engine configuration [122] [90] high ramp up capability within EFFICOMP project [245] Petr. Vrchota, Ales Prachar,P. Iannelli, V. Ciobacam, Massimo Viscardi, Maurizio Arena, Liberata Pierre Bieber Sylvain Metge Marion Morel, Julien Plé RADIAN - 2 Bartosz Dziugiel Ivan Olegovich Kondakov, Dmitry Vedernikov, Ivan Jacques Cinquin, Patrice Lefebure Shia-Hui Peng, M. Tormalm Guadagno, Luigi Vertuccio, Giuseppina Barra Vladimirovich Mareskin

Investigation of a new out of autoclave placement AFLoNext WP3 - Control Means for Vibration and Method of buckling analysis of hybrid rods at Tuning The Interaction Between Carbon Nanoparticles An Insight on EREA vision for the Environment Protection Facilitating Collaboration in ReseArch and Development process, mould concepts/release strategies and Active suppression of aeroelastic phenomena by robust Aeroelastic Coupling preliminary designing of wing caisson with truss And Epoxy Matrix For Improving Multi-Functionality 15:50 16:10 and the Energy Supply [298] to Foster Further Innovation in European AeroNautics - reusable heated bagging material [262] and artificial intelligence control methods [220] Christophe Mack, Ramón Abarca-Lopez, Jan structural layout [95] Performance Of Structural Nanocomposites [293] Marcello Kivel Mazuy, Marcello Amato RADIAN - 3 Klaus Heudorfer, Mathias Engelfried, Julian Fial, Stefan Franciszek Adam Dul Schwochow Victor Pavlovich Fomin, Ivan Vladimirovich Mareskin, Giuseppina Barra, Luigi Vertuccio, Liberata Carosella, Peter Middendorf Inna Sergeevna Sidorova Guadagno, Massimo Viscardi, Maurizio Arena

16:10 - 16:30 Aeroelasticity-teaching at Polish universities [274] Facilitating Collaboration in ReseArch and Development Investigation on Energy Director-less Ultrasonic Welding Maciej Bossak Analyzing the Fluid-Structural Interactions of a Main Without communities, noise wouldn’t be annoying [225] to Foster Further Innovation in European AeroNautics - 16:30 - 16:50 16:10 16:30 Laurent Leylekian of Thermoplastic to Thermoset Composites [338] Landing Gear Door during Take-off RADIAN - 4 Eirini Tsiangou Importance of dynamic stall modeling in aeroelastic Andreas Winkler, Carlo Aquilini analysis of helicopter rotor [280] Adam Sieradzki 16:30 17:00 Coffee Break Room ALPHA FOXTROT BRAVO IKAR AULA CHARLIE DELTA PAPA Session 11.1 12.7 5.3 12.4 8.3 3.1 8.4 2.2 b R&D Research in the Field of Aeronautics & Air Session Title Modelling and Simulation of Flight Physics - Part I RINGO Session Structural Aspects in Aircraft Design Aerial Monitoring & Surveillance of Polar Areas Multi Disciplinary Optimisation Autonomy & Automation in UAS Systems Wing Optimisation Transport Session Chair(s) Prof Shia-Hui Peng Dr Reiner Suikat Mr Alexander Shanygin Dr Daniele Violato Prof Miroslaw Rodzewicz Prof Tomasz Goetzendorf-Grabowski Prof Zdzislaw Gosiewski Prof Zdobyslaw Goraj Swedish Defence Research Agency, FOI DLR TsAGI INEA Warsaw University of Technology Warsaw University of Technology Institute of Aviation Warsaw University of Technology The RINGO CSA - shaping the future for research Aerial Monitoring and Surveillance of Polar Areas – The infrastructure [271] Preliminary design and optimization of 3D printed Structural Dynamic Model with Control System Experimental And Computational Investigation Of The Reiner Suikat, Pierre Rebel, Francesco Ferigno, Paola An Artificial Neural Network Based Analysis Method for Safety and robust certification of aircrafts and MONICA Project Issue [177] fitting for UAV [42] Multirotor Helicopter Fault-Tolerant Drive [167] Kinematics of a Light Surveillance Aircraft for Numerical 17:00 17:20 Flow Around A Helicopter Rotor Blade [308] Lanzi, Christophe Hermans, Irene Pantelaki, Adriano Skin-Stringer Structures [107] helicopters - SARAH project overview [162] Miroslaw Rodzewicz, Anna Zmarz, Dominik Głowacki, Daniel Oldziej, Zdzislaw Gosiewski Katarzyna Anna Surmacz, Jeffrey Bons Coronel Granado, Martin Streichfuss, Eike Stumpf, René Anıl Cankur, Ercan Gürses Stephan Adden Jaroslaw Hajduk, Małgorzata Korczak-Abshire, Jacek Mieloszyk, Andrzej Tarnowski, Michał Kowalik, Flutter Calculations [331] van Paassen, David Hunter, Reynald Bur, Diego Katarzyna Chwedorzewska, Anna Kidawa Rafał Perz, Witold Rządkowski Aleksander Olejnik, Robert Rogólskii Guiseppe Romano, Jose Garcia Laminated Shell Modeling Of Sandwich Beams With Integrating drones into the Arctic Observing System Morphing Wing With Surface Discontinuity. Low-Order Mixed Fidelity Aerodynamic and Aero-Structural FUture Cabin for the Asian Market - FUCAM project The RINGO CSA - shaping the future for research Ramp Region Under Four Point Bending Loading Via [215] Numerical Aerodynamics [93] SUDIL - drone neutralization platform [324] Optimization for Wings [279] 17:20 17:40 overview [115] infrastructure - 2 Rune Storvold, Agnar Holten Sivertsen, Stian Andre Andrzej Ryszard Tarnowski, Τomasz Goetzendorf- Krzysztof Lowczycki Mengmeng Zhang, Tomas Melin, Jing Gong, Michaela Structural Optimization [118] Helge Fromm Ozan Yardimci, Ercan Gurses Solbø Grabowski Barth

Innovative Coarsening-resistant Alloys with enhanced Modification of composite wing structure in terms of Radiation tolerance and Ultra-fine -grainedStructure for Flying wing UAVs for surveillance Antarctic areas in Structural Sizing for a Very Light Aircraft Wing Weight Robustness of autonomous vehicles software for scientific The RINGO CSA - shaping the future for research deformation criteria [121] aerospace application - ICARUS project overview MONICA project [277] 17:40 18:00 Optimization [209] purposes [259] infrastructure - 3 Santiago Cuesta Lopez Jerzy Bakunowicz, Tomasz Kopecki, Tomasz Lis, Miroslaw Rodzewicz, Zdobyslaw Goraj, Adam Abdelkader Benaouali, Robert Rogólski Marcin Ciopcia, Cezary Szczepański Przemysław Mazurek Tomaszewski

New Hybrid Thermoplastic Composite Aerostructures A global collaboration education project to design a Amphibous Airplane For Underwater Observation [218] The RINGO CSA - shaping the future for research manufactured by Out of Autoclave Continuous Autonomous Vessel with an Air Look [361] 18:00 18:20 UAS to prevent wildlife poaching [] Yuki Yoshida, Edyta Dziemińska, Tomasz Goetzendorf infrastructure - 4 Automated Technologies - NHYTE project overview Piotr Wołejsza, Jolanta Koszelew, Daniel Ołdziej Lelanie Smith Grabowski Vincenzo Iannone

18:20 18:40 Room: AULA “INEA's role in implementing Aviation research in H2020: feedback from 3 years of operations” 19:00 Welcome Reception

Day 2 Time Wednesday, September 27th, 2017 8:30 18:30 Registration “Challenges of business jets technological developments” 8:30 9:00 K ey-Not e Speech by Dr Bruno Stoufflet | Vice-President Scient ific St rat egic, R&D and Advanced Project s, Dassault Aviat ion

AULA Room “Accelerating market introduction of emerging innovations through integrated technology demonstrations" 9:00 9:30 K ey-Not e Speech by Dr Fay Collier | Associat e Direct or for Flight St rat egy, I nt egrat ed Aviat ion Syst ems Program, NASA Langley Research Cent er

9:30 10:00 Coffee Break Room ALPHA FOXTROT BRAVO IKAR AULA CHARLIE DELTA PAPA Session 2.1 6.2 1.2 10.1 11.2 8.1 5.2 MINI WORKSHOP Optimisation, Control and Robust Design in Characterization & Modeling Of Nanofilled Session Title Design Challenges for Future Passenger Aircraft Fatigue of Aircraft Structures Non-Destructive Testing in Aerospace Space Physics Future Challenges of Unmanned Aerial Systems Aerodynamics Coordinated by Prof Fulvia Quagliotti, Politecnico Polymers & Composites di Torino

Session Chair(s) Dr Markus Fisher Dr Antoni Niepokolczycki Prof Wieslaw Ostachowicz Prof Romana Ratkiewicz Prof Jacek Rokicki Prof Giulio Avanzini Prof Konstantinos Tserpes Airbus Operations Institute of Aviation Polish Academy of Sciences Institute of Aviation Warsaw University of Technology Università del Salento University of Patras Active thermography method for observation and Influence of jets to wall distance on the heat transfer Nano Enabled Products Containing Carbon Nanotubes Aerospace Engineering: Emerging innovations in the Application of Computed Tomography to Measurements evaluation of an internal composite structure with The heliosphere seen as an airplane with self-adapting distrubution at high flow velocity [66] Risk assessment in UAS/UAV mission planning [36] as a Innovative Aerostructures [67] 10:00 10:20 design tools for Aerospace [35] of Rivet Hole Expansion [63] discontinuities [105] wings [305] Marcin Kurowski, Ryszard Szwaba, Pawel Flaszynski, Giulio Avanzini, David M. Martínez Hernández Paulina Latko-Durałek, Paweł Durałek, Anna Jorge Bautista Hernandez Wojciech Wronicz, Maciej Malicki Hans J. Fahr Katarzyna Majewska, Magdalena Mieloszyk, Wieslaw Janusz Telega, Fernando Tejero Boczkowska Ostachowicz THz spectrometry method for observation and A reduced order model to estimating propeller/wing The process of AlSiC composite deformation at a scale of Investigation Of The BWB Concept For Fixed-Wing UAV Mechanical and nanomechanical properties of evaluation of an internal composite structure with Randomized Methods for Gust Load Alleviation in interaction in solar powered aircraft preliminary design grain investigated with diffraction methods [86] The heliosphere: models and observations [34] Applications [47] MWCNT/PP nanocomposite [108] 10:20 10:40 discontinuities [111] presence of Uncertainties [116] [40] Elżbieta Gadalińska, Andrzej Baczmański, Mirosław Romana Ratkiewicz, Wojciech Konior, Jan Kotlarz Pericles Panagiotou, Stefanos Fotiadis-Karras, Konstantinos Tserpes, Aggeliki Chanteli, Elias Magdalena Mieloszyk, Katarzyna Majewska, Wieslaw Elisa Capello, Fabrizio Dabbene Alessandro Bacchini, Enrico Cestino, Giulio Romeo Wróbel, Sebastian Wroński, Christian Scheffzük Panagiotis Tsormpatzoglou, Kyros Yakinthos Koumoulos, Spiros Pantelakis, Costas Charitidis Ostachowicz

Fatigue Test of MiG-29 Vertical Fin after Composite Patch Studies on Cellular- based additive manufacturing Elastic wave propagation models for SHM – Interface Intersellar medium magnetic field in the bow shocks Self-Localization Of Anchors In Remotely Deployed Numerical simulation of crack growth and stopping in Repairs [134] panels as enablers of specific stiffness requirements Elements [190] modelling [303] Dynamic stability analysis of the light gyroplane [137] Radio Localization System : UAV Reference System highly loaded, single lap shear, composite bonded 10:40 11:00 Andrzej Leski, Piotr Synaszko, Wojciech Zielinski, Michal [101] Piotr Fiborek, Paweł Kudela, Maciej Radzieński, Jan Paweł Kotlarz, Romana Ratkiewicz, Wojciech Tomasz Goetzendorf-Grabowski, Marcin Figat Integration [48] joints [140] Salacinski, Marcin Kurdelski, Piotr Reymer, Tomasz Miguel A Castillo Acero Wiesław Ostachowicz Konior Sławomir Romaniuk, Zdzisław Gosiewski Ioannis Floros, Konstantinos Tserpes Bartoszek, Krzysztof Dragan, Michal Dziendzikowski

Operational Loads Monitoring Program for Polish Su-22 Potentials of Lamb wave focusing for damage The ECO-COMPASS project: Introduction and status after Transport aircraft configuration design perspectives – Aircraft [135] Neutral Component of the Local Interstellar Medium [70] Analysis and optimization of morphing wing/body detection in aerospace structures [357] Portable indoor-outdoor UAV positioning system [72] 18 months 11:00 11:20 building on advanced technology bricks [109] Andrzej Leski, Artur Kurnyta, Wojciech Zielinski, Marcin Wojciech Konior, Jan Pawel Kotlarz, Romana aerodynamics [144] Pawel Kudela, Maciej Radzienski, Wieslaw Jakub Cieśluk, Zdzisław Gosiewski Konstantinos Tserpes Daniel Reckzeh Kurdelski, Piotr Reymer, Michal Dziendzikowski, Krzysztof Ratkiewicz Witold Klimczyk, Zdobysław Goraj Ostachowicz, Zhibo Yang Dragan Session 2.1 10.2 2.2 8.1 11.2 3.2 1.2 / 1.1 MINI WORKSHOP Future Challenges of Unmanned Aerial Systems Optimisation, Control and Robust Design in Session Title Design Challenges for Future Passenger Aircraft Teledetection in Space Flight Control Small Aircraft Multidisciplinary Optimisation 1 Non-Destructive Testing in Aerospace Coordinated by Prof Fulvia Quagliotti, Politecnico Aerodynamics di Torino Prof Wieslaw Ostachowicz Session Chair(s) Dr Markus Fisher Dr Mariusz Kacprzak Prof Tomasz Rogalski Prof Giulio Avanzini Prof Jacek Rokicki Dr Andrzej Iwaniuk Polish Academy of Sciences Airbus Operations Institute of Aviation Rzeszów University of Technology Università del Salento Warsaw University of Technology Institute of Aviation Dr Welchy Leite Cavalcanti Fraunhofer IFAM

On the Way to the Commercial Aircraft of the next Influence of adhesive bonds state on Teledetection in Space [276] Approach to a Synthesis of Hybrid Unmanned Aircraft Aerodynamic analysis of propulsion impact on the A Systematic Approach to Small Aircraft Design Decade, recent results by Clean Sky 2, Large Passenger Agent-based flight control and monitoring system [28] electromechanical impedance characteristics [168] 11:20 11:40 Marek Banaszkiewicz Systems (UAS) in rotastatic configurations [75] aircraft stability in the tandem wing configuration [153] Optimisation [205] Aircraft, Platform 1 [119] Jacek Pieniazek Pawel Henryk Malinowski, Tomasz Wandowski, Julius Malte Tobias Kurt Dahms Marcin Figat Andrzej Iwaniuk Markus Fischer Wieslaw Mieczyslaw Ostachowicz

Aerodynamic modeling process of aerobatic aircraft Comparitive study of deterioration of composite due to Conceptual design methodology of a box-wing Key events for Space Research, short story of Space Application of Unmanned Aircraft Vehicles (UAV) in using Reverse Engineering and Computational Fluid moisture using strain, electromechanical impedence aircraft: a novel comercial airliner [131] Aircraft Automatic Vision Spin Recovery System [62] Small aircraft and piston engines reliability study [32] 11:40 12:00 Teledetection [292] Precision Agriculture [92] Dynamics [214] Pavlos Kaparos, Charalampos Papadopoulos, Kyros Piotr Szczerba, Tomasz Rogalski Pawel Jan Glowacki, Wlodzimierz Balicki and guided waves [110] Mariusz Kacprzak Yakinthos Rafal Perz, Kacper Wronowski Aleksander Olejnik, Lukasz Kiszkowiak, Adam Rohan Nandkishor Soman, Pawel Henryk Malinowski, Dziubinski Wieslaw Ostachowicz

Experimental investigation of the effects of pre-bond Experimental Study on Flow Separation and An Advanced Weather Awareness System for small Moving Away From Conventional Aircraft Designs And Remote Sensing in the research of Mars and other Concept of auto taxi directional control system for RPAs, Hybrid Energy Systems in Unmanned Aerial Vehicles fingerprint contamination and ageing on fracture Aerodynamic Load Control using Synthetic Jet Actuators aircrafts [160] 12:00 12:20 Concepts – What Are The Challenges Ahead? [132] extraterrestrial bodies [212] first attempt [161] [172] [224] Paola Mercogliano, Alessandra Lucia Zollo, Myriam toughness of composite bonded joints [345] Raj Nangia, Jonathan Cooper Natalia Ewa Zalewska Mariusz Krawczyk, Cezary Szczepański, Albert Zajdel Anna Maria Mazur, Roman Domański Elli Moutsompegka, Konstantinos Tserpes, Kai Brube, Harry W.M. Hoeijmakers, Emiel Koopmans, Tim Berk Montesarchio, Edoardo Bucchignani, Jan Beran Mareike Schlag, Spiros Pantelakis

12:20 - 12:40 12:20 - 12:40 A cost optimized avionic system for small air transport Adhesive bonding of thermoplastic carbon reinforced vehicles [91] composites with PEEK matrix. Jan Beran, Marcela Sapakova, Vittorio Di Vito, Paola Track General Papers [164] Design for additively manufactured PT structural The application of traditional remote sensing methods for Stability of position tracking control in rigid structures of A numerical study into the dynamic stability of a Mercogliano, Piotr Masłowski, Piotr Grzybowski, Bartlomiej Wasniewski 12:20 12:40 components [139] extra-terrestrial environmental studies [195] non-holonomic UAVs [180] tailless aircraft [235] Tomasz Rogalski 12:40 - 13:00 Maciej Waśko, Jacek Słowik, Jakub Żegleń Sylwia Agata Nasiłowska Cezary Kownacki, Leszek Ambroziak Agnieszka Kwiek 12:40 - 13:00 Symmetrical Laser Shock Adhesion Test for Weak Bonds A tactical separation system for small air transport Inspection [329] vehicles [96] Maxime Sagnard, Laurent Berthe, Romain Ecault, Vittorio Di Vito, Giulia Torrano, Jan Beran Fabienne Touchard, Michel Boustie 12:40 14:30 Lunch Break "Flying Around The World With Solar Power – A Success Story" 14:30 15:00 Room: AULA K ey-Not e Speech by Mr Hannes Ross | Design Advisor and Consult ant for t he Sw iss Project Solar I mpulse

15:00 15:30 Coffee Break Room ALPHA FOXTROT BRAVO IKAR AULA CHARLIE DELTA PAPA Session 2.1 12.8 2.2 11.1 8.1 2.4 5.6 MINI WORKSHOP Modelling and Simulation of Flight Physics - Part Session Title Design Challenges for Future Passenger Aircraft CAPPADOCIA Session Flight Control Future Challenges of Unmanned Aerial Systems Vibration Control Important Fire Issues in Aviation III Coordinated by Prof Fulvia Quagliotti, Politecnico di Torino

Session Chair(s) Dr Markus Fisher Mr Fabien Marty Prof Tomasz Rogalski Prof Kostas Kontis Prof Ryszard Szczepanik Prof Zbigniew Kulesza Prof Geoff Gibson Airbus Operations Efficient Innovation Rzeszów University of Technology University of Glasgow Air Force Institute of Technology Bialystok University of Technology Newcastle University

A vision-based method for supporting autonomous Study of optimization algorithms for prognostics of Integrated aerospace systems design course: an Passive contrôle of cavity acoustics via the use of The impact of a growing number of small UAV aircraft landing [207] electrohydraulic servomechanisms for aeronautical Flame and Fire Retardancy of Polymer Composites used educational experience at Politecnico Di Torino [147] Coordination Action Pro "Production, Avionics, Design" on surface waviness at subsonic flow [173] operations on flight safety within the General Aviation 15:30 15:50 Mariusz Oszust, Tomasz Kapuściński, Dawid Warchoł, application [58] in Aviation [201] Roberta Fusaro, Nicole Viola, Marco Fioriti, Luca Cost-efficiency in Aeronautics - 1 Belkallouche Abderrahmane, Rezoug Tahar, Dala segment [184] Marian Wysocki, Tomasz Rogalski, Jacek Pieniążek, Matteo Davide Lorenzo Dalla Vedova, Paolo Bernhard Schartel Boggero, Davide Ferretto Laurent Piotr Maslowski, Jerzy Graffstein Grzegorz Kopecki, Piotr Cieciński, Paweł Rzucidło Maggiore, Marco Borghetto

A support for the vehicle architecture definition of Hardware in the loop tests of the switching formation Prediction of Buffet Phenomenon using an Eﬃcient A Comprehensive Approach for The Safety Analysis Of Influence of location of piezo-electric harvester on Comprehensive modelling of a structural laminate in innovative hypersonic transportation systems during Coordination Action Pro "Production, Avionics, Design" on flight controller [203] Inﬁnite–swept Wing Solver [211] Remotely Piloted Aircraft Systems [202] design of active vibration control system with harvesting 15:50 16:10 fire [311] conceptual design phase [148] Cost-efficiency in Aeronautics - 2 Leszek Ambroziak, Cezary Kownacki, Mirosław Jernej Drofelnik, Andrea Da Ronch, Matteo Franciolini, Laura Novaro Mascarello, Giorgio Guglieri, Fulvia energy [73] Pauline Tranchard Roberta Fusaro, Nicole Viola Kondratiuk, Zdzisław Gosiewski Andrea Crivellini Quagliotti, Stefano Fraschetti, Sandro Gervasio Andrzej Piotr Koszewnik

Prediction of 4D - trajectory time-windows based on Prognostic Neural Method based on Discrete Wavelet Preliminary flight mechanic analyses of a prandtlplane The impact of parametric uncertainty of the model of bada, Monte Carlo simulation and bayesian inference Conception of the Kinetic Launcher for Medium Class of Intumescent cake on composite: how to protect aircraft Transforms Applied to Onboard Electromechanical transport aircraft [185] Coordination Action Pro "Production, Avionics, Design" on aircraft on control laws for an automatic emergency [222] Unmanned Aerial Vehicles [213] against fire? [321] 16:10 16:30 Actuators [240] Vittorio Cipolla, Karim Abu Salem, Filippo Bachi Cost-efficiency in Aeronautics - 3 manoeuvre [181] Alvaro Rodriguez-Sanz, Fernando Gomez Mirosław Kondratiuk, Leszek Ambroziak, Zdzisław Serge Bourbigot, Sophie Duquesne Matteo Davide Lorenzo Dalla Vedova, Nicola Jerzy Graffstein, Piotr Maslowski Comendador, Rosa Arnaldo Valdes, Pablo Gonzalez, Gosiewski Lampariello, Paolo Maggiore Marta Perez, Mar Najar Godoy Simulation of high-Reynolds number 3D complex flows Probability of detection in IR Thermography evaluation Failure Of CFRP Structures Under Compressive Load In Agile and Quick Winglet Concept Selection [370] Coordination Action Pro "Production, Avionics, Design" on 16:30 16:50 [283] of Unmanned Aerial Vehicles [236] Fire [343] Sylvie Marquier Cost-efficiency in Aeronautics - 4 Jerzy Majewski, Piotr Szałtys Jowita Pawluczy Arthur Geoffrey Gibson Session 2.1 2.2 11.1 8.1 5.4 5.8 MINI WORKSHOP Morphing aircraft structures Modelling and Simulation of Flight Physics - Part Future Challenges of Unmanned Aerial Systems Session Title Design Challenges for Future Passenger Aircraft Flight Control Impact Damage Formation on Aircraft Structures Structural health monitoring in aerospace IV Coordinated by Prof Fulvia Quagliotti, Politecnico structures di Torino Dr Kamila Kustron Session Chair(s) Dr Markus Fisher Prof Tomasz Rogalski Prof Kostas Kontis Prof Ryszard Szczepanik Warsaw University of Technology Prof Yavuz Yaman Airbus Operations Rzeszów University of Technology University of Glasgow Air Force Institute of Technology Prof George Labeas Middle East Technical University University of Patras

Design and Sizing of a dismountable box wing for a Mathematical model of the UAV vertical take-off and New Hail Impact Simulation Models on Composite Aircraft dispatch assessment: tool support and Comparison of BAY model of rod vortex generator with Corroborational Approach for Reduced Order Flutter light aircraft [182] landing [301] Laminated Wing Leading Edge [186] 17:00 17:20 experimentations on flight control architectures [228] its grid-resolved model [285] modeling Of Hypersonic Fins and Canards [14] Andréani Anne-Sophie, Lainé Eric, Grandidier Jean- Marcin Chodnicki, Michał Mazur, Mirosław Radek Doubrava, Václav Horák, Kamila Kustron, Vachan Srinath Kemthoor, Pierre Bieber Tomasz Kwiatkowski, Paweł Flaszyński Levent Ünlüsoy Claude, Fleuret Clément, Gorge Anne-Laure Nowakowski, Grzegorz Kowaleczko Zdobyslaw Goraj

Hybrid experimental-numerical analysis of mechanical Introduction of the bray number in modeling turbulent Design and analysis of feedback loop to regulate the Fiber bragg grating sensor applications for structural Wing design guidelines for innovative hypersonic and thermal impact on composite airframe structures Forming o tailless aircraft pilotage properities [282] premixed flames stabilized in a stagnating turbulent basic parameters of the unmanned aircraft [302] health monitoring [57] 17:20 17:40 transportation systems [149] [237] Józef Grzybowski flow [318] Marcin Chodnicki, Katarzyna Bartnik, Mirosław Cansu Karataş, Boray Değerliyurt, Yavuz Yaman, Melin Roberta Fusaro, Nicole Viola Kamila Kustron, Zdobyslaw Goraj, Malgorzata Neche Ahmed, Youbi Zineddine Nowakowski, Grzegorz Kowaleczko Şahin Kujawinska, Marcin Malesa Conceptual design of a hypersonic antipodal civil Optimal Design of Control of Flapping Wing using Float plane aerodynamic analysis using Unmanned aerial targets. Innovations and opportunities Experimental validation of simulations of bird strike Design and analysis of a mechanism for the chord and transportation system [150] Adjoint Lattice Boltzmann [286] 17:40 18:00 Computational Fluid Dynamics methods [327] [306] events on composite wing panels [328] camber morphing of an aircraft wing [102] Roberta Fusaro, Davide Boi, Nicole Viola, Davide Mariusz Rutkowski, Wojciech Gryglas, Łukasz Łaniewski- Aleksander Olejnik, Lukasz Kiszkowiak, Adam Dziubinski Dariusz Rykaczewski Georgios N Lampeas Harun Levent Şahin, Yavuz Yaman Ferretto Wołłk, Jacek Szumbarski 18:00 - 18:20 Aircraft Loads Prediction using Enhanced Simulation Drag reduction via turbulent boundary layer flow control ICONIC:Improving the crashworthiness of composite Dynamic and Aeroelastic Analysis of A Hingeless [103] Abbas Adel, Bugeda Gabriel, Ferrer Esteban, Fu Song, transportation structures [H2020 – MSCA – ITN – 2016] Helicopter Blade with An Actively Controlled Trailing Jonathan Cooper, Ann Gaitonde, Dorian Jones, Mark Fast Optimisation Using the Adjoint Method [288] Multirotor UAV sensor fusion for precision landing [309] 18:00 18:20 Periaux Jacques, Pons-PratsS Jordi, Valero Eusebio, [315] Lowenberg, Pia Sartor, Yves Lemmens Armen Bogdan Jaworski, Jacek Rokicki Michal Grzes, Maciej Słowik, Zdzisław Gosiewski Edge Flap In Forward Flight [247] Zheng Yao Brian G. Falzon Ozge Ozdemir, Metin Orhan Kaya, Merve Sahin, Yunus 18:20 - 18:40 Emre Coskun CENTRELINE Overview Presentation Arne Seitz 17:30 Room: PAPA GA EASN Association

Day 3 Time Thursday, September 28th, 2017 8:30 18:30 Registration “Aviation 5.0 – Challenges and Solutions for 2050” 8:30 9:00 K ey-Not e Speech by Prof Dr-Ing Mirko Hornung | Bauhaus Luft fahrt e.V.

AULA Room “Connected, Networked Aircraft and The Future of On-Demand Air Mobility” 9:00 9:30 K ey-Not e Speech by Dr Bruce Holmes | Vice President and Execut ive Direct or of t he Skyt elligence Group, Smart Sky Net w orks

9:30 10:00 Coffee Break Room ALPHA FOXTROT BRAVO IKAR AULA CHARLIE DELTA PAPA Session 12.2 1.3 4.1 11.2 9.1 10.3 2.5 Optimisation, Control and Robust Design in Electric Propulsion for Commercial Aircraft – Session Title Clean Sky Session NDT of Composites Design Challenges for Future Aero-Engines Space Robotics Aircraft Components & Systems Aerodynamics Challeges & Oportunities

Session Chair(s) Mr Giuseppe Pagnano Prof Elena Jasiuniene Prof Witold Wisniowski & Dr Pawel Stezycki Prof Tomasz Goetzendorf-Grabowski Prof Mike Benzakein Dr Karol Seweryn Dr Mariusz Krawczyk Clean Sky Joint Undertaking Kaunas University of Technology Institute of Aviation Warsaw University of Technology The Ohio State University Space Research Centre PAS Institute of Aviation

How to exploit the Synergies with European Investment NDE of composites in case of hybrid metal/composite Turboprop Centrifugal Compressor System Design Concept down-selection of an innovative launch system Aerodynamic and Flight Dynamic Interaction of a Turboelectric distributed propulsion systems for future Funds in the aeronautics sector Christos Vasilakos, Bruno joints [188] Challenges [98] for small satellites [21] Less-skilled pilot decision support [27] 10:00 10:20 military trainer in spin [249] commercial aircraft [143] Mastantuono Elena Jasiuniene, Liudas Mazeika, Vykintas Samaitis, Diego Giuseppe Romano, Philippe Choy, Julie Gauvrit- Jozsef ROHACS, István Jankovics, Daniel Rohacs Konrad Socha, Jan Feliks Sikorski, Wojciech Antoni Zdobyslaw Jan Goraj, Ewa Cichocka, Marcin Figat Borys Lukasik Vaidotas Cicenas, David Mattsson Macias Ledogar, Eduard Diez Investigation of secondary flow details in low pressure Quantifying the Influence of Lightning Strike Shock Wave Light aircraft aerodynamic design methodology in World record electric aircraft motor and analytical Target Leaded Obstacle Avoidance Method Based on a Distributed measurement system based on CAN data People, Planet, Profit: The Clean Sky 2 PPP turbine [64] 10:20 10:40 Pressure Loading on Composite Material Damage [341] examples [287] calculations of its copper power losses [197] Genetic Algorithm for Mobile Robot [183] bus [50] Ron Van Manen Paweł Jonak, Bartosz Gorecki, Tomasz Borzecki, Peter Foster Krzysztof Kubrynski Robert Goraj Konrad Krzysztof Kwaśniewski, Zdzisław Gosiewski Piotr Grzybowski, Maciej Klimczuk, Pawel Rzucidlo Slawomir Kubacki A new experimental approach to studying fracture processes in fiber reinforced polymer (FRP) materials Experience with the Design of Ultralight Airplane with The application of the Inverse Robust Design technique The Path to Electrical Propulsion for Commercial Aircraft Satellite angular motion classification for active on-orbit Battery Management System Architectures for Use in Clean Sky 1 success stories [325] 10:40 11:00 under external loading [300] Unconventional Powerplant [78] to the RAE 2622 airfoil [290] [258] debris removal using robots [154] Aviation [54] Giuseppe Pagnano Vadim Levin, Yulia Petronyuk, Egor Morokov, Tatiana Robert Theiner, Jiri Brabec Krzysztof Marchlewski, Łukasz Łaniewski-Wołłk Mike Benzakein Karol Seweryn, Jerzy Sasiadek Melih Yildiz, Hikmet Tahir Karakoc Ryzhova, Alexander Shanygin

11:00 - 11:20 Thermoelectric Generators for Aerospace Applications: Cooled Turbine Shroud assembly for small turboprop Development Experience and Future Challenges [133] Entropy of preference as an effective way of assessing Clean Sky 1 to Clean Sky 2 Technology evolution engines [87] Aerodynamic design of main rotor blades for ilx-27 Gripper technology for on-orbit rigid capture of non- Ludek Janak, Zdenek Ancik, Zdenek Hadas the influence of human factors on the security of the 11:00 11:20 [326] Krzysztof Klimek, Michał Nowak, Piotr Markiewicz, light helicopter with elements of optimisation [299] cooperative object Giuseppe Pagnano, Ron Van Manen Tomasz Bulsiewicz, Grzegorz Kaczmarek, Rafał Wieńczysław Stalewski, Wiesław Zalewski 11:20 - 11:40 Mateusz Wolski dynamic active system [128] Kowalewski Real world fuel consumption of a piston-prop aircraft Krzysztof Stanisław Szafran [124] Teresa Donateo

Session 7.2 6.1 4.1 11.2 9.2 10.3 2.5 New Solutions and Technology Challenges in Optimisation, Control and Robust Design in Session Title Fatigue of Aeronautical Materials & Structures Design Challenges for Future Aero-Engines Hubrid - Electric Propulsion Technology Space Robotics Aircraft Components & Systems SAT Aerodynamics

Session Chair(s) Dr Krzysztof Piwek Prof Mario Guagliano Prof Witold Wisniowski & Dr. Pawel Stezycki Prof Tomasz Goetzendorf-Grabowski Prof Andreas Strohmayer Dr Karol Seweryn Dr Mariusz Krawczyk Institute of Aviation Politecnico di Milano Institute of Aviation Warsaw University of Technology University of Stuttgart Space Research Centre PAS Institute of Aviation

Laboratory models of drilling modules for future space Immersive environments in assistance of collaborative Sustainability Performance Measurement for a The effects of implementing a spiked nose attachment Cycle Analysis and Preliminary Design of Novel Aero- exploration [163] human-oriented product/process design in aeronautic What is the right level of innovation for SAT? [344] Static and fatigue behaviour of Composite L-beams [44] Adam Jan Zwierzyński, Wojciech Teper, Andrzej 11:20 11:40 Turboshaft Engine Based On Exergy [208] in shockwave reduction around a body [264] Engines [29] industry [219] Michel Claude Goulain Demirkan Coker, Burcu Tasdemir Gonet, Mirosław Rzyczniak, Stanisław Bednarz, Albert Onder Turan, Hakan Aydın Laurent Dala Dimitrios Chatzianagnostou, Stephan Staudacher Anna Karvouniari, Kosmas Alexopoulos, Dimitris Złotkowski, Tomasz Buratowski, Tadeusz Uhl, Karol Mavrikios Seweryn, Paweł Paśko, Błażej Żyliński High Accuracy and repeatability of the mirror positioning and precision of speed control of driving Gas Turbine Blade Failure Behavior During High Cycle Flow structure ananlysis in the gas turbine shroud gap Aerodynamic characteristics of ultralight airplane for Small Aircraft Transport forecast models [226] Hybrid-Electric Flight – what are we waiting for? [112] system of Pointing Unit of Space Hiperspectral Developing the pilots’ load measuring system [227] 11:40 12:00 Regime [297] [113] modelling aircraft control system for taxiing phase [319] Daniel Rohacs Jonas Lay Istvan Jankovics, Mehmet Burhan Tekbas, Utku Kale Tomasz Didenko Filip Wasilczuk, Paweł Flaszyński, Piotr Doerffer Robert Placek, Paweł Ruchała Spectrometer DESIS [270] Roman Wawrzaszek, Mirosław Rataj, David Krutz, Ingo Walter Conceptual design study of a geared turbofan and an Fatigue behavior of freestanding Inconel fabricated by Structural dynamic model with control system Integrated Transportation System Model for SAT System open rotor aeroengine with intecooled recuperated core Conceptual Study of a Mechanically Integrated Parallel- Innovative aviation technologies and the role of safety cold spray deposition [310] kinematics of a light surveillance aircraft for numerical 12:00 12:20 [204] [165] Hybrid Electric Turbofan [123] systems in sustaining airworthiness [284] Mario Guagliano, Sara Bagheirfard Bagheirfard, Maria flutter calculations [330] Andrzej Iwaniuk Christina Salpingidou, Dimitrios Misirlis, Zinon Arne Seitz, Markus Nickl, Anne Stroh, Patrick Vratny Michal Woelke Vittoria Zuccoli, Jan Kondas Aleksander Olejnik, Robert Rogolski, Lukasz Kiszkowiak Vlahostergios, Michael Flouros, Kyros Yakinthos 12:20 - 12:40 Hybrid Electric Intermodal Aircraft Auxiliary Power Unit [350] Capacity of small airports in Poland within the potential Strain field based fatigue damage identification on a Optimal instrumentation for turbine cascade [294] Numerical and Experimental Studies of a Separation Richard Glassock 12:20 12:40 Small Aircraft Transport system [22] helicopter tail boom during full-scale fatigue test [313] Wojciech Gryglas, Łukasz Łaniewski-Wołłk, Bartosz Control On The Wing Flap Using Close Loop System 12:40 - 13:00 Maciej Maczka Claudio Sbarufatti, Marco Giglio Olszański, Piotr Szałtys Wieńczysław Stalewski, Andrzej Krzysiak Performance, Environmental and Economic Assessments of a Turbo-electric Distributed Propulsion Systems Devaiah Nalianda 12:40 14:30 Lunch Break “Electric propulsion for aircraft” 14:30 15:00 Room: AULA K ey-Not e Speech by Dr Frank Anton| Siemens Next 47 Project s, eAircraft

15:00 15:30 Coffee Break Room ALPHA FOXTROT BRAVO IKAR AULA CHARLIE DELTA PAPA Session 4.1 5.9 6.1 8.2 7.2 / 7.1 8.1 14.1 MINI WORKSHOP New Solutions and Technology Challenges in Future Challenges of Unmanned Aerial Systems Session Title Design Challenges for Future Aero-Engines Surface engineering approaches Fatigue of Aeronautical Materials & Structures Design Challenges for MALE class IJAS Rotors & sensitivity studies SAT / Safety in SAT Coordinated by Prof Fulvia Quagliotti, Politecnico di Torino

Session Chair(s) Prof Witold Wisniowski & Dr Pawel Stezycki Prof Konstantinos Tserpes Prof Spiros Pantelakis Prof Zdobyslaw Goraj Dr Krzysztof Piwek & Dr Bartek Dziugiel Prof Fulvia Quagliotti Prof Maciej Bossak Institute of Aviation University of Patras University of Patras Warsaw University of Technology Institute of Aviation Politecnico di Torino Institute of Aviation

Cold Spraying and Laser Cladding in the aircraft Endurance Optimization Of UAV Male Class Wing By Comparison of Various Fan Conceptions for Light Sport Thermomechanical Fatigue Assessment of Nickel-Based General aviation aircraft flight path management in Methods for determining the speeds start UAV launcher coatings production as an alternative to harmful Aeroelastic Tailoring [99] Coaxial rotor a practical approach [176] 15:30 15:50 Aircrafts [206] Superalloy [332] emergency situation [234] [312] cadmium and chromium electroplating processes [242] Marek Malinowski, Wojciech Grendysa, Bartłomiej Łukasz Czajkowski Jan Klesa, Martin Helmich, Tomas Sommer Huang Yuan, Jingyu Sun Andrzej Robert Majka Leszek Ułanowicz, Grzegorz Jastrzębski Jarosław Sienicki Goliszek

FEM-DBEM approach to simulate crack propagation on Initial concepts and selected details of the structure of Vision-based formation flight control of unmanned Degradation prognostic in gas turbine engines using Cold spray technology for repair and additive a turbine vane segment undergoing a load spectrum Mission and performance sizing of low power Efficient Use of 2nd Order Sensitivity for Uncertainty the unmanned aerial vehicle PW-100 [141] aerial vehicles [238] 15:50 16:10 artificial neural networks [246] manufacturing of aerospace components [320] [254] turboprpeller single engine aeroplane [43] Quantification [281] Wojciech Grendysa, Marek Malinowski, Bartłomiej Leszek Ambroziak, Mariusz Bogdan, Zdzisław Maria Grazia De Giorgi Klara Petrackova Venanzio Giannella, Roberto Guglielmo Citarella, Jerzy Bakunowicz Marcin Wyrozębski Goliszek Gosiewski Edoardo Vivo, Massimo Mazzeo Civil rpas integration in future ATM: time-based The structural design of vertical empennage of PW-100 Partially feasible solution space for integrated fleet Practical approach to exergy and economy of a high separation procedures with dynamic mobile area Column stand for aircraft multi-barrel machine gun male aircraft [221] schedule design [356] 16:10 16:30 bypass turbofan engine [278] (DMA) [217] model sensitivity study on analisys methods [229] Wojciech Jerzy Miksa, Tomasz Goetzendorf- Onder Turan, Hakan Aydin Bartłomiej Goliszek, Wojciech Grendysa, Marek Roberta Fusaro, Giovanni Di Meo, Giovanni Di Meo, Paweł Abratowski Malinowski Grabowski Nicole Viola, Nicole Viola, Sara Cresto Aleina, Sara Cresto Aleina

16:30 - 16:50 16:30 - 16:50 Exergo-genetic optimization of a high bypass turbofan Research and selection of MALE wing profile [233] The concept of cooperation MOTOR SICH JSC with in preliminary design phase [322] Cezary Górniak A tactical separation system for small air transport European Union enterprises/organizations and scientific 16:30 16:50 Onder Turan 16:50 - 17:10 vehicles [96] institutions for the creation and modernization of 16:50 - 17:10 In-flight testing for assessment of a small UAV Vittorio Di Vito, Giulia Torrano, Jan Beran helicopters [359] Turboprop Exhaust Component Test [334] performance [250] Ivan Moskalenko Tomasz Iglewski Adam Tomaszewski, Zdobyslaw Jan Goraj

17:00 17:15 Room: AULA Closing Ceremony - Summary & Adjourn