GALAZAN WINCHESTER M70/94 KENSIGHT AK 47

UNIVERSAL REAR SIGHT RIFLE/SHOTGUN SIGHTS ELEVATOR KIT SIGHT DOVETAIL SLOT BLANK FRONT SIGHT HOOD ADJUSTABLE NIGHT SIGHTS Front Blade Protection & Enhanced Sight Picture Genuine Trijicon Lamps For Fast Sight 24 Of The Most Popular Elevators Fill Empty Dovetails For A Clean, Acquistion In Low Light Finished Appearance Protects the front sight from damage caused by normal field Universal Elevator Kit contains 24 eleva- Drop-in sights with genuine, Trijicon The perfect cure when removing fac- use. Open front design allows plenty of light to reach the front blade tors, covering the most common ones you lamps feature polished quartz lenses, tory sights or restoring antiques to orig- and provide an enhanced sight picture. Spring steel construction get calls for. Included are six double-step which make these sights the perfect up- inal space. Mild steel blanks machined for durability. Available for Model 94 carbine with sight ramp and short elevators; 6 double-step long eleva- pre-64 Model 70. ab grade for AK-47 rifles and variants used during low light periods. slightly oversize for a close, perfectly 1 Sight bodies are EDM machined from rugged, 4140 steel, then heat- tors; 6 standard width (.080") single-step el- SPECS: Steel, blue, matte finish. 1" (2.5cm) long x /2" (12.7mm) wide. Model blended fit in barrel sight dovetails. Easy to shape, file and blue. ab 1 11 treated to Rc 38-40 and vacuum tempered to retain the extra-tight evators and six special narrow width (.050") 3 94 - /2" high (12.7mm). Model 70 - /16" (16.7mm) high. SPECS: Mild steel, blued finish. 12" (30.4cm) long, fits nominal /8" singlestep elevators. Don’t pass this kit up tolerances. Rear sight fits AK-47, Norinco 56S, Mak-90, and Poly- (9.52mm) x 60° dovetails. #344-000-007 Model 94 Carbine w/Ramp Sight Hood, tech AKS variants. Fine line serrations on the rear blade surface help - a real money maker and lifesaver for any 4D7A49 ...... $ 9.99 gun shop. ab #080-770-375 Dovetail Slot Blanks, 8K14B44 ...... $ 16.99 cut glare in bright light conditions. Features click adjustments for #344-000-008 Pre-64 Model 70 Sight Hood, 4D7F49 . . 9.99 SPECS: Length and width varies. Blued steel. windage and uses standard issue, tangent rear sight increments for elevation adjustments. Robust, Front post has M6 x.075" tpi thread STOCK # QUANTITY FITS to replace standard issue front sight post on all AK variants with a #080-506-001 6 .080" wide single-step MARBLE front sight base. #080-506-002 6 .050" wide single-step NO. 87 SLOT BLANK SPECS: 4140 steel, blue, matte finish. .076" (1.9mm) diameter Tritium lamps. #080-506-003 6 short double-step #100-002-630 Rear AK-47 Night Sight, 5A119A99 . . . . .$ 149.99 #080-506-004 6 long double-step Ready-Made To Fill Sight Dovetails MAUSER FRONT SIGHT BLANK #100-002-631 Front AK-47 Night Sight, 5A45N59 . . . . 56.99 — Advise # — Sight Elevator Refill, 8K8N99 ...... $ 11.99 Polished blue or matte stainless steel, flat top blank fills empty Ready To Fit & Shape For Custom Applications; ab #080-506-000 Rear Sight Elevator Kit, 8K27I19 ...... $ 33.99 sight dovetails. SPECS: Carbon steel, blued, polished, or stainless steel, matte finish. Fits Fits The Unique, Metric Dovetail 3 5 nominal /8" (9.5mm), 60° dovetails. Approximately /8" (15.8mm) wide overall. .375" high blade lets you zero the military #579-087-100 No. 87 Dovetail Slot Blank, Blued, 9G6C74 . . $ 8.99 Mausers, like the Model 96 Swede and 98, and MARBLE SPORTING REAR SIGHT #579-000-014 No. 87 Dovetail Slot Blank, SS, 9G8I24 . . . 10.99 other rifles with a metric dovetail, to point of aim. Square post blade gives an easy-to-see, Traditional Sights Fit Many Brands well defined sight picture with the original, is- DECORATIVE SLOT BLANK sue rear sights. Plenty of extra material so you HERITAGE ARMS REMINGTON 600 can file and shape the blade to original contour or a custom shape Finely Crafted, Custom Pattern Looks - and just the right height. 5.26mm dovetail fits the Mauser front sight Good On Modern & Classic Rifles VENTILATED RIB base. Fits most Mauser 91 through 98 rifles with military sight base. ab Not just another slot-filler, but an attractive, all steel blank that SPECS: Steel, blued, matte finish. .077" (1.9mm) wide, .375" (9.5mm) high Flattop Semi-Buckhorn Full-Buckhorn hides the unsightly appearance of an empty sight dovetail on your Replace Soft Factory Plastic With Steel Or Aluminum above 81° x .207" x .062" dovetail. May require minor fitting. favorite sporter rifle. Stylish, diamond shape with decorative, milled #078-050-000 Mauser Front Sight Blank, 8G11N99 . . . . $ 15.99 Sporting Rear Sight Base with three styles of Uprights. Perfect edges blends naturally into the barrel contour for a truly finished Fits and looks like the original rib, with greatly improved strength. as replacement sights for customizing the sight picture, or adding Fully finished for easy installation; exactly replaces the now obsolete 3 look. Polished and blued with enough room for custom engraving, adjustment to fixed sight guns. Fits standard /8" dovetails; available if so desired. Fits standard, .375" x 60° dovetails without fitting. ab and unavailable factory, plastic rib. ab with Flat Top, Semi-Buckhorn or Full Buckhorn Uprights. ab 9 SPECS: Steel, blue, matte finish. Aluminum, black, anodized, matte, finish. SPECS: Steel, polished blue finish. 1" (2.5cm) long x /16" (1.4cm) wide. Fits SPECS: Dovetail Model - Total heights: #63 and 64, .275" (7.1mm) - .505" 1 .375" x 60° dovetail. 17 /2" (44.5cm) long. Uses existing screws. HIVIZ FIBER OPTIC RIFLE SIGHT (12.4mm); #63H, 64H, 66H and 67H, .350" (9.0mm) - .630 (16.0mm); #65, #429-000-001 Steel Rem. 600 Vent Rib, 9B116P44 . . . . $ 136.99 #080-000-193 Decorative Slot Blank, 8K16Q14 ...... $ 18.99 Eye Grabbing Dot For Fast Target Acquisition 66, 67 and 68, .300" (7.6mm) -.510" (12.9mm). #429-000-002 Alum. Rem. 600 Vent Rib, 9B97F59 . . . . 121.99 Front sight: six, interchangeable, fiber optic rods STOCK # STYLE SHANK MODEL offer a choice to match nearly all shooting and FLAT TOP SIGHTS light conditions. The glowing, orange and green WILLIAMS ALUMINUM SLOT BLANK light pipes provide great contrast against dark target backgrounds. ab #579-063-001 Dovetail Short 63 blank in place and makes removal easy. Black anodized to blend SPECS: Steel, black, matte finish. .315" (8mm), .380" (9.7mm), .420" #579-063-003 Dovetail Short 63H Fills Empty Sight Dovetail Without Fitting well with most blue finishes. ab 3 1 (10.7mm), .500" (12.7mm) height. Standard /8" dovetail. Light pipes: /16" 3 5 #579-066-001 Dovetail Long 66 SPECS: Aluminum, black anodized. /8" (9.5mm) x /8" (15.9mm). Fits stan- 3 1 Machined, aluminum, slot blank drops- (1.5mm), /32" (2.4mm), /8" (3.1mm), diameter. .720" (18m) long. dard, .375" (9.5mm) x 60° dovetails. #579-066-003 Dovetail Long 66H in easily to fill the empty sight dovetail for a #638-115-000 .315" Fiber Optic Sight, 8C22G39 ...... $ 27.99 SEMI BUCKHORN SIGHTS clean-looking barrel. 5-40 set screw locks #962-000-034 Aluminum Slot Blank, 2F5L59 ...... $ 6.99 #638-000-013 .380" Fiber Optic Sight, 8C23L19 ...... 28.99 #579-064-001 Dovetail Short 64 #638-000-014 .420" Fiber Optic Sight, 8C23N19 ...... 28.99 #579-064-003 Dovetail Short 64H FRONT SIGHT ELEVATION CORRECTION CHART #638-000-015 .500" Fiber Optic Sight, 8C23B19 ...... 28.99 #579-067-001 Dovetail Long 67 #579-067-003 Dovetail Long 67H How To Use Table Below - Suppose a rifle, having a sighting radius of 24" between front sight and receiver sight, shoots 6" high FULL BUCKHORN SIGHTS at 100 yards, even with the rear sight adjusted as low as possible. Remove front sight and measure overall height, preferably with a #579-065-001 Dovetail Short 65 micrometer. This might be .410", such as a Marble No. 41N. Reference to columns for 24" and 6" on table below will show a necessary HIVIZ AK 47/74/AKM correction of .040". This would mean a new, higher front sight (with an overall height of .410" plus .040" for a corrected height of .450") #579-068-001 Dovetail Long 68 such as a Marble No. 45N, should be installed. FIBER OPTIC FRONT SIGHT — Advise # — Flat Top Rear, 9G18D39 ...... $ 22.99 Sighting in should be done with a benchrest or prone with a sand bag or other rest for the rifle. Do not put rifle barrel or forearm Bright Fiber Optic For Easy Aiming — Advise # — Semi-Buckhorn Rear, 9G18E39 ...... 22.99 directly on solid surface, but put the back of your hand or wrist on the rest and hold forearm of the rifle securely in your hand with ap- proximately the same tightness of grip you would use when shooting at running game. If the forearm or barrel is rested directly on the Replacement front sight post has a — Advise # — Full-Buckhorn Rear, 9G18M39 ...... 22.99 sand bag or rest, the rifle will shoot higher than when held firmly while shooting at game as more “muzzle flip” will occur. light-gathering fiber optic rod to produce a bright dot that’s easy to acquire in a AMOUNT OF ADJUSTMENT NECESSARY TO CORRECT ERROR broad range of light conditions. Easily re- Distance Between Front & Rear Sights places the post on most AK-47, AK-74 and 14" 15" 16" 17" 18" 19" 20" 21" 22" 23" 24" 25" 26" 27" 28" 29" 30" 31" 32" 33" 34" AKM rifle sights, no gunsmithing required. Amount 1" .0038 .0041 .0044 .0047 .0050 .0053 .0055 .0058 .0061 .0064 .0066 .0069 .0072 .0074 .0077 .0080 .0082 .0085 .0088 .0091 .0093 Unique, U-shaped rod gathers far more light than a standard straight rod—perfect for low-light situations. Comes with two green and of Error 2" .0078 .0083 .0089 .0094 .0100 .0105 .0111 .0116 .0122 .0127 .0133 .0138 .0144 .0149 .0155 .0160 .0156 .0171 .0177 .0182 .0188 two red interchangeable rods that can be changed quickly using At 3" .0117 .0125 .0133 .0142 .0150 .0159 .0167 .0175 .0184 .0192 .0201 .0209 .0217 .0226 .0234 .0243 .0251 .0259 .0268 .0276 .0285 the included tool, so you can customize the sight picture or replace 100 Yards 4" .0155 .0167 .0178 .0189 .0200 .0211 .0222 .0234 .0244 .0255 .0266 .0278 .0289 .0300 .0311 .0322 .0333 .0344 .0355 .0366 .0377 a damaged rod quickly. Elevation adjustable. ab Given in 5" .0194 .0208 .0222 .0236 .0250 .0264 .0278 .0292 .0306 .0319 .0333 .0347 .0361 .0375 .0389 .0403 .0417 .0431 .0445 .0458 .0472 SPECS: Black steel post with 2 green and 2 red fiber optic rods. Includes detent Inches pin, sight wrench, fiber optic rod removal tool, carrying case, and instructions. 6" .0233 .0250 .0267 .0283 .0300 .0317 .0333 .0350 .0367 .0384 .0400 .0417 .0434 .0450 .0467 .0484 .0500 .05175 .0534 .0551 .0567 #638-000-190 AK-47 FO Front Sight, 8C22F09 ...... $ 25.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 313

73 Sig20 p313-328.indd 313 11/18/2020 10:50:51 AM MARBLE DOVETAIL FRONT RAMP MARBLE UNI-RAMP FRONT SIGHT Graceful & Attractive For Solid Steel Body For Strength; MARBLE’S SIGHT SELECTION CHART Rifles & Muzzleloaders Long Rod Picks Up Lots Of Light MARBLE SPORTING REAR LEAF REAR FRONT

Solid steel ramps for custom fitting fiber optic, ivory and brass 3 MOD. Glowing, /4" long, fiber optic WINCHESTER RIFLES FLAT TOP SEMI-BUCK FULL BUCK FLAT NO. bead sight blades. Available in two heights and four barrel contours rod gives excellent visibility. Quickly to fit a wide selection of current and older production rifles. Ramp 1892 Rep. .25-20, .32-20, .38-40, .44-40 66 67 68 69 31W replaces screw-held front sights on rifles, shotguns and muzzle- 1892 Carb. .25-20, .32-20, .38-40, .44-40 63 64 65 69 - attaches to barrel with a single screw under the sight body and sol- loaders. Two blade heights and two barrel contours to fit a variety 1892 Carb. with ramp 63 64 65 69 - der; flat base is drilled for two mounting screws. ab of applications. ab 1894 Rep. .32-40, .38-55 66 67 68 69 31W SPECS: Steel, blue, polished finish. .340" (8.6mm) wide. 2" (5cm) long. SPECS: Steel, blue, polished finish. 2" (5cm) long. Height - .405" (10.3mm) 1894 Rep. .25-35, .30-30, .32 Spec. 66 67 68 69 45W Height is from the top of barrel to the bottom of dovetail. 5 3 7 3 1894 with ramp .25-35. .30-30, .32 Spec. 66 67 68 69 - or .470" (11.9mm). Barrel Contour - /8", /4", /8" diameter. Optic rod /4" 1894 Carb. .32-40, .38-55 63 64 65 69 - STOCK # BL DIA. HGT STOCK # BL DIA. HGT (19mm) long, orange. 1894 Carb. .25-35, .30-30, .32 Spec. 63 64 65 69 894 #579-000-034 .625 .100" #579-000-038 .625 .225" STOCK # HEIGHT CONTOUR PRICE 1894 Carb. with ramp 63 64 65 69 - 5 Mod. 61 Pump Action .22 Cal. 63 64 65 69 34W #579-000-016 .405" /8" 9G15Q99 $ 19.99 #579-000-035 .6875 .100" #579-000-039 .6875 .225" Mod. 62 Rep. Rifle .22 Cal. 63 64 65 69 34W 5 #579-000-036 .875 .100" #579-000-040 .875 .225" #579-000-017 .470" /8" 9G15F99 $ 19.99 Mod. 63 .22 L. R. Auto 63 64 65 69 34W

RIFLE/SHOTGUN SIGHTS RIFLE/SHOTGUN 7 Mod. 64 .25-35, .30-30, .32 Spec. 66 67 68 69 - #579-000-041 Flat .225" #579-000-020 .405" /8" 9G15I99 $ 19.99 7 Mod. 65 .25-20, 32 66 67 68 69 - — Advise # — Dovetail Front Ramp, 9G10K39 ...... $ 12.99 #579-000-021 .470" /8" 9G15A99 $ 19.99 Mod. 67 Single Shot .22 Cal. 63 64 65 69 34W Mod. 68 .22 Cal. 63 64 65 69 45W Mod. 69 .22 Cal. 63 64 65 69 45W Mod. 70 All Cal. 66 67 68 69 - MARBLE CONTOUR FRONT SIGHT Mod. 71 .348 Cal. 66 67 68 69 - The Standard In The Industry Mod. 77 .22 Cal. S. L. Rifle 63 64 65 69 41M Mod. 88 .308 Cal. L. A. Rifle 66 67 68 69 - Precision-made sights for rifles, both with Mod. 100 63H 64H 65 69H 26MR and without ramp bases. The blade is grace- fullly contoured, sloping toward the front. MARLIN RIFLES Made of steel and nicely blued to look good Mod. 39, A Rep. Rifles 63 64 65 69 37M Ramp Front, Gold Glow Sight Glow Sight Mod. 39 A with Ramp 63 64 65 69 - on any gun. RAMP MOUNTED FRONT SIGHT: Mod. 56 22 Cal. L. A. 63 64 65 69 - “MR”features a straight-sided base for guns having a ramp base on the barrel. All “MR” sights have a .340" (8.6mm) wide base. The BARREL Mod. 36, 336 rifle and carbines 66 67 68 69H 45W 17 MOUNTED FRONT SIGHT has rounded base sides for guns with the front sight dovetail cut directly into the barrel. “W” sights have a /32" Mod. 336, SC .35 Cal. 66 67 68 69H 37M 1 (13.5mm) wide base. Ramped and Barrel front sights are available with three beads, Pope’s Island Gold, flat faced gold available in /16" 3 1 3 (1.6mm) or /32" (2.4mm) diameter. Ivory, flat faced white polymer in /16" (1.6mm) or /32" (2.4mm) diameter. GLOW SIGHTS: Two colors - REMINGTON RIFLES 17 Orange or Green .060" dia. optic rod. RAMP MOUNTED - .340 wide base. BARREL MOUNTED - /32" wide base. ab Mod. 12 Rep. Rifle .22 Cal 63 64 65 69 31W SPECS: Steel, blue, polished finish. .620" (15mm) long. Mod. 121 Fieldmaster .22 Cal. 63 64 65 69 37M — Advise # — White or Gold Sight, 9G11B99 ...... $ 14.99 Mod. 121 Fieldmaster (1936 Series) .22 Cal. 63M 64M - - 37M Mod. 141 Gamemaster .30, .32, .35 66H 64 65 69 31M — Advise # — Glow Sight, 9G15K19 ...... 18.99 Mod. 241 Speedmaster .22 Auto-Ldg. 63M 64 65 69 37W RAMP MOUNTED FRONT SIGHTS GLOW SIGHTS Mod. 33, 34, 41, .22 Cal. Single Shot 63 64 65 69 31W Mod. 341 Speedmaster .22 Cal. 63 67H - 68H 31W HGT MRBL # STK# 1/16" GOLD STK# 1/16" IVORY STK# 3/32" GOLD STK# 3/32" IVORY STK# GREEN STK# ORANGE Mod. 510, 513T 63 64 65 69 37M .260 26-MR #579-502-621 #579-502-622 #579-602-621 #579-602-622 NA NA Mod. 511, 512, 550, 552 63 64 65 69 37M .290 29-MR #579-502-921 #579-502-922 #579-602-921 #579-602-922 NA NA Mod. 514 63M 64 65 69 37M Mod. 521T .22 Cal 63 64 65 69 45W .312 31-MR #579-503-121 #579-503-122 #579-603-121 #579-603-122 #579-603-126 #579-603-125 Mod. 572 .22 Cal. 63M 64M - 69 37M .343 34-MR #579-503-421 #579-503-422 #579-603-421 #579-603-422 #579-603-426 #579-603-425 Mod. 700 63 64 - 69 41MR .375 37-MR #579-503-721 #579-503-722 #579-603-721 #579-603-722 #579-603-726 #579-603-725 Mod. 721, 722 All Cal. 63H 64H - 69H 34W Mod. 760 All Cal. 66 67 68 69H - .410 41-MR #579-504-121 #579-504-122 #579-604-121 #579-604-122 #579-604-126 #579-604-125 Mod. 740 .22 Cal. 63H 64H - 69H 37M .450 45-MR #579-504-521 #579-504-522 #579-604-521 #579-604-522 #579-604-526 #579-604-525 Mod. 740 ADL 63H 64H - 69H - Mod. 742 63H 64H 65 69 41 .500 50-MR #579-505-021 #579-505-023 #579-605-021 #579-605-022 #579-605-026 #579-605-025 Mod. 760 .22 Cal. 66H 67H 65 69 41 .538 53-MR #579-505-321 #579-505-322 #579-605-321 #579-605-322 NA NA Mod. 725 66 67 - 69 31M On late Model 700, 721, 722, 725, 740, 760 No. 25 Ramp BARREL MOUNTED FRONT SIGHTS GLOW SIGHTS Sight Base is required to use Marble Open Rear Sights (not stocked)

HGT MRBL # STK# 1/16" GOLD STK# 1/16" IVORY STK# 3/32" GOLD STK# 3/32" IVORY STK# GREEN STK# ORANGE SAVAGE RIFLES .343 34-W #579-103-431 #579-103-432 #579-203-431 #579-203-432 #579-203-436 #579-203-435 Mod. 340, .30-30 Cal. for Gun with Slot in Ramp 63H 64H - 69H - .375 37-W #579-103-731 #579-103-732 #579-203-731 #579-203-732 #579-203-736 #579-203-735 Mod. 342 .22 Hornet 63H 64H - 69H - Mod. 1899 E. F. G. 66 67 68 69 - .410 41-W #579-104-131 #579-104-132 #579-204-131 #579-204-132 #579-204-136 #579-204-135 Mod. 99R .250 and .300 Cal. 66 67 68 69 - .450 45-W #579-104-531 #579-104-532 #579-204-531 #579-204-532 #579-204-536 #579-204-535 Types A, B, C, D & H. Serial No. below 297,000 in Cal. .22 HP. .25-35, .30-30, .303-.300 - - - 69H 45W .500 50-W #579-105-031 #579-105-032 #579-205-031 #579-205-032 #579-205-036 #579-205-035 For Featherweight Mod. 99T .30-30 & .303 Cal. 63 64 65 69H - .538 53-W #579-105-331 #579-105-332 #579-205-331 #579-205-332 NA NA 99F, G & EG .22 Cal. HP; 99RS .250 63 64 65 69H 34W .570 57-W #579-105-731 #579-105-732 #579-205-731 #579-205-732 NA NA 99F, G & K .30-30 & .303; Carbines .250, .30-30, .303 66 67 68 69H 37M .312 31-W NA #579-103-132 #579-203-131 #579-203-132 #579-203-136 #579-203-135 99T .22 HP, .250, .300, 99A, E. F. G. EG.K & R .250, 99G, K, RS .300 66 67 68 69H 45W Mod. 110MC-MCL 66H 67H - 69H - Mod. 99DL .300 Sav. 66 67 68 69H 26MR MARBLE Chart To Determine Overall Sight/Ramp Heights Mod. 99E .243, .300 Sav. and .308 66 67 68 69H 29MR

Sight Total Sight Total Sight Total Sight Total Sight Total STEVENS RIFLES No. Ramp Height No. Ramp Height No. Ramp Height No. Ramp Height No. Ramp Height Mod. 87 63H 67H 68 69H 37W 3 3 5 7 9 26MR ⁄16" .3545 26MR ⁄8" .5420 41MR ⁄16" .6295 37MR ⁄16" .7195 34MR ⁄16" .8125 Mod. 87K 63H 64H 65 69H 37W 3 3 3 9 3 29MR ⁄16" .3845 45MR ⁄16" .5445 53MR ⁄16" .6325 26MR ⁄16" .7295 53MR ⁄8" .8200 BROWNING 3 5 7 3 7 22 Automatic late models - - - - 37M 31MR ⁄16" .4065 34MR ⁄16" .5625 29MR ⁄16" .6345 45MR ⁄8" .7320 50MR ⁄16" .8445 22 Automatic 63 64 65 69 - 3 3 7 7 9 34MR ⁄16" .4375 29MR ⁄8" .5720 31MR ⁄16" .6565 41MR ⁄16" .7545 37MR ⁄16" .8445 Mod. .30, .06 - - - - - 3⁄ 3⁄ 3⁄ 5⁄ 9⁄ 37MR 16" .4695 31MR 8" .5940 37MR 8" .6570 53MR 16" .7575 41MR 16" .8795 STURM-RUGER RIFLES 5 3 5 9 7 26MR ⁄16" .4795 50MR ⁄16" .5945 45MR ⁄16" .6695 29MR ⁄16" .7595 53MR ⁄16" .8825 Mod. 44 Mag. - - - 69H 45MR 3 5 7 9 9 Mod. 10/22 - - - 69 41MR 41MR ⁄16" .5045 37MR ⁄16" .5945 34MR ⁄16" .6875 31MR ⁄16" .7815 45MR ⁄16" .9195 5 7 3 3 9 - No sight available. ⁄ ⁄ ⁄ ⁄ ⁄ 9 29MR 16" .5095 26MR 16" .6045 41MR 8" .6920 50MR 8" .7320 50MR 16" .9695 † Used with ⁄16" Ramp. 5 5 3 5 7 ‡ Used with ⁄16" Ramp. 31MR ⁄16" .5315 34MR ⁄8" .6250 50MR ⁄16" .7195 45MR ⁄16" .7945

GUARANTEED. FOREVER.

PAGE 314 SINCE 1939 Office/Tech: 641-623-5401

73 Sig20 p313-328.indd 314 11/18/2020 10:51:04 AM MARBLE FOLDING LEAF REAR SIGHT MARBLE #95 FOLDING SPORTING RIFLE/SHOTGUN SIGHTS CALCULATING SIGHT HEIGHTS Perfect “Back-Ups” For Scoped Guns REAR SIGHT Folds down when not in use. Strong spring secures sight in “up” Determining proper sight height is not difficult. Just remember the front and rear sights must be the same height above or “down” position. The reversible notch piece gives choice of “U” Traditional Appearance; Folds the center of the barrel. And, when you make your measurements, you MUST use a caliper or micrometer. A few thousandths or “V” notch. Styles and heights available to fit most standard rear Down For Storage Or Carry can have a substantial effect, and this is no place for a tape measure or eyeballing! sight dovetails. The chart shows the overall sight height for those sights below. Folding design helps prevent accidental damage to the rear leaf. Leaf easily flips down, out of the way, when your favorite lever or B 69 & 69W - Height, .370" (9.4mm) to .480" (12.2mm). single-shot rifle is stored or carried. Long shank, barrel-mounted D 69H & 69WH - Height, .470" (11.9mm) to .600" (15.2mm). sight is fully adjustable using the center plate and center plate lock screw—no need for a separate elevator. Flat top leaf with white dia- A C 69EH & 69WEH - Height, .520" (13.2mm) to .640" (16.3mm). mond sight insert helps improve sight acquisition and alignment. 3 No. 69EH and No. 69H are .096" (2.4mm) Screw and drift adjustable for windage. Fits nominal /8" dovetail. higher than standard folding leaf; EH model ad- May require minor fitting. ab SPECS: Steel, blue, polished finish. Leaf - .300" (7.8mm) high, .630" justs for elevation from .538" to .657". Blade & 3 Screw replacement parts available to maintain (15.8mm) wide. Fits nominal /8" (9.5mm) dovetail. your existing, folding-leaf sights. ab #579-000-082 #95 Folding Rear Sight, 9G24Q79 . . . . . $ 30.99 A = Distance from centerline to top of barrel at rear B = Rear sight height. #579-069-000 No. 69 Flat Top, 9G18C39 ...... $ 22.99 Instructional video sight. Barrel outside diameter divided by 2. available at #579-069-001 No. 69H Flat Top, 9G18E39 ...... 22.99 Brownells.com C = Distance from centerline to top of barrel at front D = Front sight height. #579-000-071 No. 69EH Flat Top, 9G18J39 ...... 22.99 sight. Barrel outside diameter divided by 2. #579-000-073 Blade & Screw, 9G3F10 ...... 3.99 N.E.C.G. EXPRESS SIGHT DETERMINING FRONT SIGHT HEIGHT blade with a Williams µ⁄¶·" (.3445") ramp for a total FLAT TOP FOLDING LEAF SIGHT WITH WINDAGE 69WEH Fast Sight Picture, Elegant Looks height of .5945". NO.69W - “W” indicates Windage 69W When you have a rear sight and need to find the correct and can be used wherever No. Classically styled, all-steel sight with one fixed, plus single or front sight height, the formula is (A + B) – C = D. With the DETERMINING REAR SIGHT HEIGHT 69 sights are indicated in Marble double flip-up leaves give fast pickup and clear sight picture for rear sight in place: sight chart. hunting in thick cover. Install directly on a rib. When you have a front sight and need to find the cor- NO.69WH - “H” indicates “high” SPECS: Machined steel, in-the-white. Height from top of base radius to bot- 1) Measure barrel diameter at the location of the rear rect rear sight height, the formula is (C + D) – A = B. With tom of dovetail is .250" (6.3mm). Total sight height to top of middle leaf is sight and divide by 2 to get Dimension A. and can be used wherever No. the front sight in place: 69H is indicated. “H” is .096" (2.4mm) higher. No.69WEH - “EH” .755". 1-Leaf Sight: .98" (25mm) long, 2-Leaf Sight: 1.4" (3.5cm) long, .7" 2) If the rear sight is adjustable, set the blade in the indicates “extra high” and is elevation adjustable .538" to .657". (17mm) wide. 1) Measure barrel diameter at the projected rear sight MIDDLE of its travel. Then measure the total rear #661-000-028 1-Leaf Express Sight, 1F74Q79 ...... $ 87.99 location and divide by 2 to get Dimension A. #579-069-002 No. 69W Marble’s Flat Top, Windage, sight height from the top of the barrel, to the top 9G19P19 ...... $ 23.99 #661-000-029 2-Leaf Express Sight, 1F82G44 ...... 96.99 of the sight blade to get Dimension B. For example, 2) Measure the barrel diameter at the location of the #579-069-003 No. 69WH Marble’s Flat Top, Windage, on a WGOS with a ¼" blade, the mid-setting is .462" front sight and divide by 2 to get Dimension C. 9G19F99 ...... 24.99 high, so Dimension B would be .462". #579-000-072 No. 69WEH Marble’s Flat Top, Windage, 3) Measure the front sight height from the top of the 3) Measure the barrel diameter at the projected loca- 9G19I19 ...... 23.99 barrel to the top of the sight blade to get Dimen- N.E.C.G CLASSIC EXPRESS SIGHT tion of the front sight and divide by 2 to get Dimen- sion D. sion C. Magnum Clamp 4) Add Dimension C + Dimension D, then subtract Di- 4) Add Dimension A + Dimension B, then subtract Di- Won’t Loosen Under Recoil mension C from the total to get Dimension D, the mension A from the total to get Dimension D, the MARBLE BULLSEYE REAR SIGHT required height of the front sight above the top of required height of the rear sight above the top of Flip-up, windage adjustable, express- the barrel. the barrel. style sights clamp securely into the pre- contoured base so they won’t shoot loose, even under heavy recoil. 5) Choose the tallest ramp and shortest sight blade 5) Choose a rear base and sight combination with a Blank leaves require trimming to correct height. Drill and tap, or combination that’s closest to the results in Step 4. In total height closest to D. If the rear sight is adjust- silver solder to barrel. P1 single leaf. P2 two leaves. 1 1 the example below, the required front sight height is able, the total height should match Dimension D SPECS: Steel, blued, polished finish. 3 /16" (8cm) long. /4" (6.3mm) wide. 2.6 3 .587". A Williams ⁄8" (.282" high) ramp and a Marble when the sight is positioned in the MIDDLE of the oz. (774g) weight. Fits barrel diameters: L .730" to .830", XL .830" to .930". #31MR sight (.312" high) will provide a combined adjustment area. Short height of .594". Or combine a Williams .250" high Short STOCK # STYLE PRICE Fixed #661-001-830 P1-XL 1F132D79 $ 165.99 For Fast Target Acquisition & Improved Accuracy #661-002-730 P2-L 1F144D49 $ 169.99 EXAMPLE WITH NUMBERS D = .587" Barrel-mounted, dovetail Bullseye sight gets you on target fast #661-002-830 P2-XL 1F138L54 $ 162.99 with perfect alignment for improved accuracy. Steel, double-ring B = .462" peep design ensures consistent sight alignment and helps improve shooting form. The moment the rear sight is misaligned, the front sight drifts out of the center ring, telling the shooter to re-align. A = .475" 3 C = .350" Replaces standard /8" dovetail rear sights on many rifles. For use N.E.C.G. “MASTERPIECE” with bead-type or traditional blade front sights. Adjustable models are available with a short or long base and six-position step elevator ADJUSTABLE REAR SIGHT that’s adjustable in .030" increments for precise elevation settings. Fixed model features the same Bullseye peep design but without the Precision Windage & Elevation Adjustment .700" extended base and is not elevation adjustable. All models are drift .950" adjustable for windage. May require minor fitting. ab Notched, “V”-style blade is fully adjustable for windage and el- 3 SPECS: Steel, blue, polished finish. Fits nominal /8" (9.5mm) dovetail. evation. Machined from solid steel, polished and blued to compli- 9 FRONT SIGHT CALCULATION: REAR SIGHT CALCULATION: Outside Ring O.D. - /16" (1.4cm). Inside Ring I.D. - .15" (3.8mm). Adjustable ment the finest sporting rifle. 3 - .338"-.535" (8.6mm - 13.5mm) elevation adjustment in six, .030" (.76mm) SPECS: Steel, polished, blued. 2 /16" (5cm) long, .546" (13.8mm) wide, 1.6 1 1 (A + B) - C = D (C + D) - A = B increments. OAL from rear of dovetail - Long: 2 /2" (6.3cm). Short - 1 /2" oz. (44g) wt. .322" (8.1mm) from top of barrel to top of base. Solder-on or (3.8cm). Fixed - .438 (11.1mm) fixed height from bottom of dovetail to drill and tap for 8-36 screw. 7 (.475 + .462) - .350 = .587 (.350 + .587) - .475 = .462 center of inside ring. /16" (1.1mm) long. #579-000-163 Short Adj. Bullseye Sight, 9G18G39 . . . . . $ 22.99 STOCK # MODEL FITS BARREL DIA. PRICE .937 - .350 = .587" .937 - .475 = .462" #579-000-164 Long Adj. Bullseye Sight, 9G17D59 . . . . . 21.99 #661-105-830 MR-L .731" To .830" 1F104G79 $ 130.99 #579-000-165 Fixed Bullseye Sight, 9G17K59 ...... 21.99 #661-105-930 MR-X .831" To .930" 1F100D29 $ 117.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 315

73 Sig20 p313-328.indd 315 11/18/2020 10:52:05 AM N.E.C.G. “MASTERPIECE” N.E.C.G. RUGER® KENSIGHT M1 CARBINE LYMAN RECEIVER SIGHT BANDED FRONT RAMP RIFLE FRONT SIGHTS REAR APERTURE SIGHT 3 Styles Fit Hundreds Of Gun Models High-Visibility White Bead Classic, Hooded High Quality Reproduction Of The Rugged and precise sights, machined to hug Or Fiber Optic Rod Speeds Factory Original the receiver for lowest line of sight, least protru- Front Sight Bands 1 Window-Style Target Acquisition sion. Audible-click, /4 minute adjustments for Modern, high-quality reproduc- elevation and windage. Elevation slide is scribed Machined from solid, mild ® No-gunsmithing replacement front sights for Ruger No. 1 and tion of the original rear sight makes in 3 minute increments. Quick release allows steel; classic sight that’s easy ® M77 rifles feature sturdy, fully-machined bodies with a high-visi- restoring your M1 carbine easier and slide to be removed with a press of a button. to fit and finish. A wide selec- bility white bead or bright fiber optic rod for fast sight acquisition. the final job look authentic. Patterned Elevation stop screw permits instantaneous return to zero. Model 57 tion of interchangeable blades Makes your front sight stand out even when aiming against dark after the factory rear sight using modern CAD/CAM design tech- is for round receivers; Model 66 is for flat receivers, 66 WB includes match any hunting situation. Accepts “Masterpiece” front sights foliage or muted backgrounds. Beautifully blued sight body blends niques and wire EDM cut from 4140 bar stock for tight tolerances. semi-target knobs. The 57 SML is a special model for tang installa- only. Hood shown is optional. Hoods are available in Medium and with your rifle’s original bluing. Features audible clicks for precise windage adjustment and preset tion on muzzleloaders such as T/C Hawken and similar rifles and window-style Large hood that features light-admitting side cutouts SPECS: Steel body, blued. Fits factory sight ramp on Ruger No. 1 and M77 range increments for elevation adjustment. includes semi-target knobs. The 57 SMET includes target knobs. ab for use with fiber optic front sights. rifles. Heights given below are measured from bottom of base to top 1 SPECS: Steel, blued, matte finish. Fits M1 Carbine. SPECS: Aluminum, black, anodized. Comes with two apertures, /2" SPECS: Mild steel, in-the-white. Band - approx. 3.3" (8.4cm) long. Height of sight. White Bead - White polymer bead, .300" (7.6mm) high, .940" 5 #100-004-084 Rear Aperature Sight, 5A25J66 ...... $ 29.99 (12.7mm) x .093" (2.3mm) and /8" (15.8mm) x .040" (1.1mm). RIFLE/SHOTGUN SIGHTS RIFLE/SHOTGUN shown in chart is from top of barrel to bottom of dovetail. Hoods - approx- (2.4mm) wide. Fiber Optic - Red fiber optic bead, .330" (8.38mm) high, 1 imately 1 /8" (3.1cm) long, Med. - .630" (16mm); Large - .708" (18mm) I.D. .100" (2.5mm) wide. FITS MODEL STOCK # #661-000-064 .300" White Bead Front Sight, 1F27D19 . . $ 33.99 STOCK # MODEL I.D. ¬MM® HEIGHT PRICE BROWNING Sako 57 SME #539-057-002 #661-000-066 .330" Red Fiber Optic Front Sight, BSA Majestic 57 WJS #539-057-003 #661-120-551 1 .551" (14) .500" 1F81M59 $ 101.99 1F37P59 ...... 46.99 LYMAN TARGET FRONT SIGHT #661-120-571 1A .571" (14.5) .421" 1F81K59 $ 101.99 COLT Sako 57 SME #539-057-002 #661-120-618 3 .610" (15.5) .421" 1F81C59 $ 101.99 Low, All Steel With Eight Inserts ENFIELD U.S. 1917, .30-06; British 1914 .303B 57 SME #539-057-002 #661-120-650 4 .650" (16.5) .421" 1F81B59 $ 101.99 All steel front sight with eight inter- (altered receiver) #661-120-670 4A .670" (17) .386" 1F81M59 $ 101.99 changeable sight inserts that are locked MARLIN 39A 66 MC #539-066-003 into place by threaded cap. Sight in- #661-120-689 5 .689" (17.5) .362" 1F81D59 $ 101.99 MARLIN 336 66 LA #539-066-002 cludes insert set. ab MOSSBERG 402 66 MC #539-066-003 #661-120-708 5A .708" (17.9) .386" 1F81B59 $ 101.99 9 SIGHT APERTURES SPECS: Sight tube- /16" (14.3mm) dia.. 3 MUZZLELOADERS Lyman Great Plains, Trade, 57 GPR #539-000-001 #661-120-748 6 .748" (19) .362" 1F81M59 $ 101.99 Dovetail base is /8" (9.5mm) wide for stan- A Complete Selection Of Deer Stalker #661-120-787 6B .787" (20) .362" 1F81B59 $ 101.99 Williams Apertures dard dovetail. Use 17AML with 57SML Receiver sight. 17 ATC is for use with #661-120-827 6C .827" (21) .362" 1F81G59 $ 101.99 factory vernier tang sight on T/C muzzleloaders. 17AEU fits European MUZZLELOADERS T/C Hawken and others 57 SML #539-057-004 Have the right combination of aper- 9mm (nominal .360" x .070") dovetail. HEIGHT is from bottom of dovetail IN-LINE MUZZLELOADERS White Systems 57 SMET #539-057-007 #661-120-100 Medium Sight Hood, 1F27L99 ...... $ 34.99 ture and disc always on hand. Perfect to to center of aperture. In-line change between hunting and target shooting or as replacements for #661-000-045 Large Window-Style Hood, 1F32L29 37.99 7 STOCK # HEIGHT MODEL REMINGTON 141 66A #539-066-001 missing ones. Fit Williams and Lyman, /32"-40 sights. ab #539-017-360 .404" 17AHB REMINGTON 700, 721, 722, 660 57 WJS #539-057-003 “MASTERPIECE” FRONT SIGHTS - STANDARD SHANK SIGHT APERTURES - Standard lengthshank #539-017-444 .465" 17AEU REMINGTON XP-100 57 WJS #539-057-003 Spring-loaded plunger and detent, fits Williams Foolproof, Target Foolproof, and 5D only. 7 3 1 3 #539-017-445 .494" 17AMI SAVAGE 10, 110 57 WJS #539-057-003 located in the “Masterpiece” Banded SPECS: /32"-40 thread. /8" or /2" STD Aperture Paks include three, /8" or 1 Front Ramp, hold the sight blade into /2" O.D. apertures: one each with .050", .093" and .125" aperture holes. #539-017-446 .494" 17AML WINCHESTER 64, 92, 94 66 A #539-066-001 7 7 the longitudinal dovetail; set screw /8" x .050" Target Aperture Pak includes three, /8" O.D. apertures with #539-017-532 .584" 17AUG WINCHESTER 70 57 WJS #539-057-003 firmly locks the sight blade in place. .050" aperture holes. S-5 S-4 S-1 #539-017-852 .854" 17ATC WINCHESTER 1886 Win. & Browning 66 WB #539-000-004 5 3 Styles available: S-1 - /64" (1.9mm) and #080-766-380 /8" Std. Aperture Pak, 8K00MSM ...... $ 59.99 JAP Arisaka 6.5mm & 7.7mm 57 SME #539-057-002 3 3 — Advise # — 17A Front Sight, 5K35L99 ...... $ 39.99 /32" (2.3mm) diameter silver bead. S-4 - fixed silver /32" diameter 1 #080-766-500 /2" Std. Aperture Pak, 8K00MGC ...... 36.99 11 3 MAUSER 98, 91, 93, 94, 95, 96, 1904, 1909, 57 SME #539-057-002 64 32 bead and fold-down / " (4.3mm) diameter Ivory bead. S-5 - / " x 7 11 #080-766-705 /8" x .050" Tgt. Apts., 8K00EUP ...... 46.99 /16" long red fiber optic light pipe. 1936, G33/40 7 3 7 SPECS: Steel, blued. Base - /8" (22mm) long, S-4 is /4" (19mm) long; /32" MAUSER 98, 91, 93, 94, 95, 96, 1904, 1909, 57 SMET #539-057-007 9 INDIVIDUAL STANDARD APERTURES - One Per Package (5.5mm) wide. Blade - /16" (14.3mm) long. Height - shown in chart is from 7 3 1 7 1936, G33/40 SPECS: /32"-40 thread. /8", /2" or /8" O.D apertures. 3 LYMAN MJT TARGET SIGHT 32 bottom of dovetail to top of blade. S-5 Light Pipe - / " (2.3mm) Dia. x 3 SPRINGFIELD 1903 57 SME #539-057-002 11 #080-766-381 /8" x .050" Aperture, 8K00AHR ...... $ 22.99 /16" (17mm) long. 90 MJT UNIVERSAL RECEIVER SIGHT - Features 3 SPRINGFIELD 1903 57 SMET #539-057-007 #080-766-382 /8" x .093" Aperture, 8K00PRE ...... 23.99 windage and elevation knobs with click detents in STOCK # MODEL HEIGHT ¬MM® PRICE 3 1 #080-766-383 /8" x .125" Aperture, 8K00GAI ...... 22.99 minute and /4 minute graduations. ab — Advise # — Receiver Sight, 5K93K99 ...... $ 102.99 1 #661-121-197 S-1 .197" (5.0) 1F21P59 $ 26.99 #080-766-501 /2" x .050" Aperture, 8K00MIP ...... 17.99 SPECS: Machined aluminum body, steel 1 knobs. Matte black finish. Adjusts from 1.06" TARGET KNOBS FOR LYMAN 57 - Knurled thumb knobs replace #661-124-256 S-4 .256" (6.5) 1F65M59 $ 81.99 #080-766-502 /2" x .093" Aperture, 8K00EKC ...... 17.99 the original screws on the 57 series. #661-000-040 S-5 .256" (6.5) 1F37B39 $ 43.99 7 (2.6cm) to 1.56" (3.9cm) above bore line. In- #080-766-706 /8" x .050" Aperture, 8K00JML ...... 16.99 7 cludes /8" (22mm) target disc w/.040" (1mm) aperture. Wt. SPECS: Blued steel. Windage and Elevation Knob sold per each. Fit Ly- #661-000-043 S-5 .354" (9.0) 1F36H54 $ 42.99 man 57 series only. LONG SHANK SIGHT APERTURES - Fits Williams 4 oz. (113g). Fits Williams Foolproof Bases. For .22RF target rifles. WGRS ONLY. Longer shanks allow correction for #539-090-000 MJT Receiver Sight, 5K105D99 ...... $ 117.99 #539-399-262 Target Elevation Knob, 5K2D99 ...... $ 4.99 proper eye relief. Standard or brass-ringed, Twi- #539-399-261 Target Windage Knob, 5K2E99 ...... 4.99 light (TW) aperture. 20 MJT GLOBE FRONT SIGHT - Machined steel, 7 3 3 globe front with interchangeable inserts. ab SPECS: /32"-40 thread. /8" Long Shank (L/S) or /8" Twi- 1 light, Long Shank (TW L/S) Aperture Paks include three, SPECS: Steel, blued. 1 /4" (3.1cm) long, .875" (22.2mm) 3 3 diameter. /8" (nominal) dovetail. 1.8 oz. (51g) wt. .700" /8" O.D., long shank apertures: one each with .050", .093" and .125" holes. FULTON ARMORY M1/M14/M1A 3 (17mm) from bottom of dovetail to center of aperture. #080-784-380 /8" L/S Aperture Pak, 8K00FXD ...... $ 43.99 Includes 2 posts, 5 aperture inserts. N.E.C.G PEEP-SIGHT 3 #080-784-390 /8" TW L/S Aperture Pak, 8K00EXM . . . . . 41.99 REAR SIGHT ELEVATION KNOB #539-620-000 MJT Globe Sight, 5K48D99 ...... $ 57.99 Provides Excellent Sight Picture, Clamps TWILIGHT APERTURES - A light gathering brass ring surrounds To Weaver-Style Bases 93 MJT AR-15 & MATCH RIFLES TARGET FRONT SIGHT - Ma- Replaces Worn-Out Part; the peep to enhance visibility in low light. Fits Foolproof, Target chined steel globe front with interchangeable Solid-steel sight is fully adjustable for Calibrated In Yards Foolproof, and 5D sights only. 7 3 inserts. Knurled bezel locks aperture in place. Fits windage and elevation; provides a primary SPECS: /32"-40 thread. Standard length shank. /8" Twilight (TW) Aperture Steel rear sight elevation knob is 3 standard dovetail bases. Accepts Anschutz inserts. sight when hunting dangerous game and a Pak includes three /8" O.D. apertures: one each with .050", .093" and .125" drop-in ready to replace a worn out Quick-detach locking thumbscrew retains sight scope is not practical, or an emergency backup. Furnished with aperture holes. Individual apertures also sold separately. knob on your Garand. USGI-Spec, calibrated in yards, with one on base. ab .093" and .125" diameter apertures; allows you to shoot very accu- 3 minute of elevation at 100 yards per click, just like the original. Can #080-767-380 /8" TW Aperture Pak, 8K00BRD ...... $ 47.99 SPECS: Steel, blue, matte finish. .550" (13.9mm) from rately, even under poor light conditions. Fits Weaver-style or Pica- 1 also be used to replace the elevation knob on an M14/M1A to change bottom of dovetail to center of aperture. 1 /4" (3.1cm) long, .750" (19mm) tinny base, may be easily removed and returned to zero every time. INDIVIDUAL TWILIGHT APERTURES - One Per Package rear sight calibration from meters to yards. ab diameter. Includes - five disc inserts with .126" (3.2mm), .154" (3.9mm), Includes two elevation slides. ab 3 8 1 1 SPECS: Steel, Parkerized, matte black. Calibrated in yards. Fits M1 Garand #080-767-050 / " x .050" TW Aperture, 8K00FAN ...... $ 17.99 .161 (4.1mm), .169" (4.3mm), .177" (4.5mm) apertures; Two post inserts SPECS: Steel, blue finish. 1 /8" (2.9cm) long, 1 /2" (3.8cm) wide, 1" (2.5cm) 3 7 and M14/M1A rifles. #080-767-093 /8" x .093" TW Aperture, 8K00CUP . . . . . 17.99 with .067" (1.7mm) and .102" (2.6mm) wide posts. high. Aperture - /32-40 thread, accepts Williams and Merit sight discs. 3 #100-005-278 Rear Elevation Knob, 3K53P24 ...... $ 70.99 #080-767-125 /8" x .125" TW Aperture, 8K00LRH ...... 17.99 #539-620-100 93 Match Sight, 5K62A99 ...... $ 69.99 #661-000-035 Weaver Peep Sight, 1F83J29 ...... $ 97.99

GUARANTEED. FOREVER.

PAGE 316 SINCE 1939 Office/Tech: 641-623-5401

73 Sig20 p313-328.indd 316 11/18/2020 10:53:28 AM N.E.C.G. CZ 550 GHOST SMITH ENTERPRISE M1/M14/M1A TRUGLO WILD WEST GUNS MARLIN LEVER RIFLE/SHOTGUN SIGHTS RING PEEP SIGHT FRONT & REAR SIGHTS RIFLE SIGHT SET ACTION RIFLE REAR SIGHT For Easy Restorations Or M14/M1A Front Sight Precision Crafted For Reliable Fully Adjustable, Fiber Improves Sight Picture Competition Function; Fully Adjustable Optic Increases Visibility Rear ghost ring improves sight picture Beautifully machined, all steel peep sight features the larger Heat-treated, 4130 and speeds target acquisition. Adjusts for opening of a .096" I.D. ghost ring aperture for close range encoun- chrome moly front and rear Combination red front windage and elevation. Fits Marlin fac- ters with dangerous game. Extra-thick steel clamps with slotted, sights make it fast and easy and green rear provides tory scope base holes; requires drilling/ knurled knobs lock solidly to the rear square bridge on CZ 550 rifles. to upgrade your original eye-catching contrast for tapping if receiver is not equipped with M1 Garand Front Sight Integral indexing lug engages notch on left side of receiver for com- military sights for improved quick sight alignment. Fi- factory mounting holes. ab plete immobilization of sight and proper return-to-zero. Ghost ring strength and accuracy. ber optic rods gather avail- SPECS: Steel, matte blued. Includes screws. provides a wide field-of-view and eliminates small peep obstruc- Parkerized finish reduces glare and helps deflect light for a clear, able light and draw your eye to the sights to get you on target fast. Fits Marlin 1895, 1894, 336, and 30. tion caused by snow and other debris. Fine threaded sight post is easy-to-acquire sight picture in all light conditions. Match-type Machined aluminum body adjusts for windage and elevation. Front locked in place with two, Allen head setscrews to prevent loosening front sights feature a narrow, .062" wide front blade for a crisp, clean and rear set replaces factory sight without alteration or gunsmithing. #981-100-095 WPM 95 Sight, 1H134G99 ...... $ 149.99 under the heaviest recoil; each half of post turn yields approximately sight picture at all normal competition ranges. ab Ruger® 10/22® fits factory barrels. Winchester 94 fits models with 1 /2" elevation correction at 100 yards. Left and right clamps adjust SPECS: Steel, Parkerized finish. .062" (1.6mm) wide blade. Includes setscew. a front sight ramp. ab independently for precise windage control. Installation requires no #851-100-101 Match M1 Garand Front Sight, 1E44F09 . . $ 48.99 SPECS: Aluminum, black, matte finish. Front and rear set. modification to rifle. #902-000-006 Ruger 10/22 Rifle Sight Set, 2K33G14 . . .$ 38.99 7 1 3 #851-114-106 Match M14/M1A Front Sight, 1E37D39 . . 43.99 SPECS: Steel, blue, matte finish. /8" (2.2cm) long, 1 /2" (3.8cm) wide, /4" (1.9cm) high, .096" (2.4mm) diameter aperture. 1.7 oz. (48g) wt. Includes #902-000-007 Winchester 94 Rifle Sight Set, WILLIAMS MAUSER 96 aperture adjustment tool and Allen wrenches. 2K33K14 ...... 38.99 #661-000-046 CZ-550 Ghost Ring Sight, 1F86L69 . . . $ 101.99 APERTURE SIGHT TECH SIGHTS RUGER 10/22 No Gunsmithing Replacement For Military Rear Sights GI STYLE APERTURE SIGHTS Drop-in for a vast improvement ® ® N.E.C.G. RUGER RECEIVER SIGHT Provides Familiar M16 TRIJICON RIFLE SIGHT in sight picture over the military issue. Adjusts for windage and elevation; Clamps Quickly To Ruger® Integral Bases Service Rifle Sight Picture & Improved Accuracy Self-Luminous Replacement Sights works with original front sight. No permanent changes to rifle. ab For Popular Rifles SPECS: Aluminum, anodized, black, satin finish. Fits M96 and other Swed- Finely machined steel receiver sight 3 ish military, small ring Mausers. /8" disc dia., .150" dia. aperture. Includes clamps to factory ring notches on Ruger rifles; Replacement sight sets instructions. serves as a primary hunting sight in situations give your 10/22 a longer sight The ultimate, self-luminous rifle sight. where a scope may not be practical. Pack as radius for improved accuracy Improves sight pickup and visibility during #962-660-196 Aperture M96 Sight, 2F21J24 ...... $ 24.99 an emergency sight to save your hunt in case of scope failure. In- potential, plus the same sight picture as an AR-15/M16 with military- low-light hours when game is most active. All issue sights. Installation requires no gunsmithing, no drilling/tap- stall and remove without loss of zero. Height matches most M-77®, sights include rugged sapphire crystal, self-il- ping, and no permanent alterations to the rifle. Rear sight mounts 77/22® and No. 1 factory front sights. Includes .093" and .125" aper- luminating Tritium lamps for a bright, well-defined aiming point and tures that draw your eye to the sight for fast sight alignment. Adjust- using the factory-provided holes for a scope base. All-steel front extra-long life. Lamps guaranteed by the manufacturer to remain able for windage and elevation. ab sight assembly has a standard detent-locking M16 post surrounded self-luminous for 12 years. ab 1 3 1 by protective ears that guard it from damage and misalignment. User WILLIAMS AK/SKS SPECS: Steel, blue finish. 1 /4" (3.2cm) long. /4" (19mm) high. 1 /4" (3.2cm) wide. SPECS: Steel body, blued. Tritium insert. Includes front and rear sight un- may substitute any aftermarket post that replaces the standard A2. #661-040-100 Receiver Sight, for Ruger, 1F82A44 . . . . $ 96.99 less shown in chart. All sights are adjustable if rifle or shotgun barrel was TSR100 set’s rear sight is adjustable for windage and features close- originally equipped with factory adjustable sights. ADJUSTABLE REAR SIGHT range and long-range flip-up apertures similar to the M16A2 sight. Drop-In Replacements For Military For even greater precision, the TSR200 set’s rear sight has a single aperture that uses a rotating dial for fine adjustments in elevation; STOCK # FITS PRICE Front/Rear Sights click adjustable for windage. #892-415-125 AR-15 A1/A2 front only 2H00FIL $ 59.99 No gunsmithing required for in- N.E.C.G RIMFIRE RECEIVER SIGHT SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" #892-415-025 AR-15 A1/A2 with 10-36 windage 2H80I00 $ 87.99 creased accuracy and improved sight Precision Target Acquisition; Mounts On (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" screws picture with this aperture rear sight for (24mm) tall.Sold as front/rear sight sets. Grooved Rimfire Receivers #892-407-001 Remington 74, 76, 760, 7400, 2H00LEB $ 99.99 hunting or target shooting. Fully adjustable for elevation and wind- age. Easy to install. Replacement sight is held in place with a single, #100-006-910 TSR100 10/22 Sight Set, 2C62E89 ...... $ 73.99 7600, 870, 1100, 11-87 (w/rifle Machined, steel peep sight gives you a #100-006-911 TSR200 10/22 Sight Set, 2C70K54 ...... 82.99 hardened, steel roll pin. ab sights) front and rear 3-dot 3 precise sight picture for pin-point accuracy SPECS: Aluminum, blued, matte finish. Aperture - /8" disc dia. with .150" from your match or hunting rifle. Sight at- dia. aperture. Includes roll pin and instructions. Fits all AK or SKS rifles 3 taches to grooved, /8" dovetail, rimfire re- and carbines. ceivers. Fully adjustable for windage and el- #962-445-600 Aperture SKS Sight, 2F21N24 ...... $ 24.99 evation; comes with .093" and .125" apertures, plus a handy wrench #962-474-760 Aperture AK Sight, 2F21G24...... 24.99 for easy installation. ab SHAVER GLOBE SIGHT INSERTS 3 1 SPECS: Steel, black, matte finish. 1" (2.5cm) long, /4" (19mm) wide, /2" WILLIAMS (12.7mm) high. .093" (2.3mm) and .125" (3.1mm) apertures. Fits grooved, Finer Crosshairs, Posts 3 /8" (9.5mm) rimfire receivers. Or Silhouettes For GROOVED RECEIVER FOOLPROOF #661-000-044 Rimfire Receiver Sight, 1F87F54 ...... $ 102.99 Greater Accuracy Fits All Grooved Receiver .22’s WILLIAMS Developed specifically for silhouette shooters Adjusts to fit any .22 with a receiver SHORTY DOVETAIL RAMP using globe front sights. groove that measures .300" to .600" wide. TRUGLO DOVETAIL FRONT SIGHT Thinner, more versatile No drilling, tapping or modifications re- Compact & Attractive crosshairs, posts and ap- quired. Internal micrometer adjustments For Smaller Guns Metal Body For Durability; Bright Fiber ertures do away with thick, bulky inserts; won’t hide that 500 meter with positive clicks. Lock-screws secure ram or tiny “black” you need to hit. ab adjustments against accidental change. Optic Insert Increases Visibility SPECS: 1095 spring steel, blued. .01" (.25mm) thick. Post & Aperture Card Polished, blued steel. Hoodless. Sweat-on or screw-on. ab Mounts low but may require a higher than SPECS: Height shown in parenthesis in chart is from top of barrel to includes 3 apertures, 4 crosshairs, 3 posts. Lyman 17A also fits Browning ab Light-gathering red fiber optic rod offers a standard front sight. bottom of dovetail. Width of ramp is .250" (6.3mm). Made only in heights bright, eye-grabbing bead for fast sighting. Fits BPCR. .470" (12mm) dia. Redfield/Alley - .550" (14mm) dia. Fits Redfield SPECS: Aluminum , black, anodized body. Bright steel “standard style” 3 shown. 3 65/66 and Alley globe sights. Large Lyman/Anschutz - .675" (17.1mm) dia. windage and elevation screws. Blue steel aperture. FP-GR 1 /4" (4.4cm) nominal /8" dovetail. ab 21 1 3 wide. 1 /32" (4.2cm) high. Weighs 1 /4 oz. (35 g). .0093" (2.4mm) aper- SPECS: Aluminum, black, anodized finish. /4" (19mm) long. Red optic 5 5 STOCK # HEIGHT STOCK # HEIGHT 3 STOCK # MODEL PRICE ture opening. FP-GR-TK: 2 /32" (5.5cm) wide. 1 /8" body. Blue steel “Target rod is /4" long, .060" (1.5mm) diameter. Height measured from top of 1 9 #781-100-017 Lyman 17A Sight 1H32Q79 $ 40.99 Knobs” adjust windage and elevation. .093" (2.4mm) aperture opening. #962-010-032 /8" (.032) #962-010-188 /32" (.188) ramp to top of sight. 3 3 #962-010-094 /16" (.0945) #962-010-282 /8" (.282) #902-000-008 F/O Dovetail Front Sight, .450" High, #781-100-010 Redfield/Alley 1H28Q89 $ 33.99 #962-200-810 Foolproof FP-GR, 2F63D74 ...... $ 74.99 2K16K14 ...... $ 18.99 #781-100-011 Large Lyman/Anschutz 1H27P99 $ 34.99 #962-201-606 Foolproof FP-GR-TK, 2F72J24 ...... 84.99 — Advise # — Shorty Ramp, 2F19K54 ...... $ 22.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 317

73 Sig20 p313-328.indd 317 11/18/2020 10:54:50 AM 73 Sig20 p313-328.indd 318 RIFLE/SHOTGUN SIGHTS 580, 581,582. SPECS: TARGET F above bore axis. dard front sights (mayrequirea higher bead).Aperture .750" to1.250" Aperture 1.250"-1.750" abovebore axis.LOW for sporterrifleswithstan HIGH, for target rifleswithglobefronts. SPECS: come with All lock. elevation and knobs both on windage and elevation, knurled target adjustments micrometer get receiver sights with positive-click, FOR . #962-201-075 #962-201-075 #962-201-001 #962-201-510 #962-201-510 #962-201-540 #962-201-540 #962-201-002 #962-201-002 .500" thru .570" WilliamsGoldBead,.500"thru.570" — Advise# WilliamsGoldBead,.260"thru.450" — Advise# muzzleloaders. Allheights includethe.090" thickdovetailportionitself. Remington. Wideare .531" (13.5mm) for dovetailedbarrels on.22riflesand Medium are.340" (8.6mm)to fitfactoryrampsincludingMarlinand wide are.250" (6.35mm) widetofitWilliamsStreamlinedShorty Ramps. and T#11"GL T#33"GL EGTWIDTH HEIGHT STK#3/32"GOLD STK# 1/16"GOLD #962-161-340 #962-161-340 #962-161-450 #962-161-450 #962-161-290 #962-161-290 #962-161-401 #962-161-401 #962-161-502 #962-161-502 #962-161-250 #962-161-370 #962-161-370 #962-161-341 #962-161-341 #962-161-310 #962-165-310 #962-165-310 #962-161-310 #962-161-372 #962-161-372 #962-161-251 #962-161-251 #962-161-531 #962-161-531 #962-161-371 #962-161-371 #962-161-571 #962-161-571 #962-161-311 #962-161-311 Highly visible fiber optic rear sight fits lever actions, .22 rim- .22 actions, lever fits sight rear optic fiber visible Highly 7 22 LR TARGET RIFLES - True, tar- / 8 WILLIAMS " x .050" aperture sight disc. Rem. 510alsofits511,512,513T, 521T. Rem.540Xalsofits541S,

Aluminum, black,anodized. WILLIAMS OOLPROOF BASES - Adapt sights above to .22 rifles. Target FPBase,Rem.540X, Target FPBase,Rem.510, Target FPBase,Win.75, high, &all“Wide”, high, 2F12J74 Target FPLow, Target FPHigh, Micrometer Click Adjustments TARGET FOOLPROOF RIFLE SIGHT BEAD ld wt a ahnd ed ie a gives bead crisp, highly visible sight picture. machined a with blade polished. Nominal.375" dovetail.Narrow SPECS: NA NA NA NA NA NA NA NA NA NA NA NA NA NA ...... hn sralnd ams invisible almost streamlined, Thin, Replaces All-Metal Beads For Ramps & 2F65N44 ...... 2F65D44 2F12B74 ...... PAGE REAR DOVETAIL ab Steel blade,blued.Brassbead, Dovetailed Barrels FIRESIGHT With Fiber Optics 3 2F17F99 WILLIAMS /

8 ...... " Dovetail Rear Sights 2F17D99 318 50 Wide .500" 20 Medium Narrow .260" .260" 46 Medium .406" 58 Medium .538" 33 Medium Narrow .343" .343" 40 Narrow .450" 50 Medium .570" 2F17M99 35 Wide Medium Narrow .375" .375" .375" 21 Narrow .281" 32 Medium Narrow .312" .312" ...... $ 14.99 14.99 $ $

ab

76.99 76.99 19.99 19.99 19.99 ab - diameter aperture. SPECS: slug- and combat shooting shotguns. on picture sight fast a for GHOST R SPECS: high gold bead front makes a fast system for Ruger carbines. .570" and sight rear WGRS SET -A SIGHT FRONT/REAR RUGER #962-100-901 #962-100-901 #962-445-650 #962-445-650 #962-000-068 #962-000-068 #962-100-002 #962-000-015 #962-100-775 #962-100-770 #962-000-027 #962-100-751 #962-100-086 #962-100-003 #962-100-158 #962-100-760 #962-100-750 #962-000-019 #962-100-740 #962-100-742 #962-100-700 #962-100-070 #962-100-054 #962-100-022 #962-100-044 to give guns the advantage of peep sights. same asa SPECS: No gunsmithing required. help you get on target quickly. and conditions Adjustable light most under for seen easily are windage dots green Bright and elevation. SPECS: fires, and most American-made rifles with the standard from bottom of bladetobottom of notch. Fits #962-000-098 #962-000-098 TC MODEL STOCK # Aluminum, matte black.Green fiberopticrod. Approximately Aluminum, blackanodized. Front - Aluminum, black,anodized. Peepheight isapproximately the Aluminum, blackanodized. .195"(4.9mm) 3 - Use with Use - APERTURE ING / 16 “WGRS” RECEIVER SIGHT " (4.8mm) OpenSight Blade. GSSvg Savage 110Accu-trigger(round WGRS-Savage T/CEncore T/CContender Diamond WGRS-Black Muzzleloaderwithoctagonbarrels WGRS-TC WGRS-TC WGRS-M/L CVA withround barrel, Win.X-140 CVA Apollo,Traditions, Deerhunter WGRS-CVA Rnd WGRS-CVA ModernMuzzleloadingLegend& KnightDISC, Browning T-Bolt WGRS-Legend H&RTopper/Handi-Rifles &RugerMk WGRS-DISC AnyFNMauser(andothers)w/ WGRS-HR Browning sportingHi-Power autorifle WGRS-FN Marlin336 Rem4,WGRS-BAR 7400, 6, 7600 WGRS-336 Rem742ADL, 760ADL;ForBDL’s use WGRS-7400 Remington700, 721,722 Post-warWin70(ex.375),670, 770 WGRS-742 WGRS-700 WGRS-70 Sav-Ans 54, 64, 141, 141M, 153, 153S; Ruger Ruger10/22 WGRS-54 WGRS-RU-22 WGRS-44 Ghost RingAperture, Dovetail Rear Firesight, WGRS-RU-22 Set, ab WILLIAMS GUARANTEED. FOREVER. receiver) (for usew/538Mbead) T/C BlackDiamond and othersw/octagonbblorreceiver Wolverine, fitsfactoryholes II pistols(drilling/tappingrequired) and lever FP-740AP Foolproof receiver .22’s 320. Canbefittedtomostdovetailed Rem 541S, 552BDL,572BDL;Win310, hole spacing tlz dvti o existing or screw holesontopof receiver dovetail utilize 2F40A79 ...... ® • Easily Installed • Compact 44;use.500to.560front sight • Rustproof • Low Profile WGRS-37 • Lightweight • Positive 2F5D59 ...... 1 In most cases, these sights SINCE 1939 / Windage & Elevation 16 2F16G14 " goldbead,.570" high. ® ab ; use.500to.570front 3 / Adjustments 8 " dovetails. FITS ...... 3 / 8 " dovetail. $ $ 1 / $ 2 18.99 " 47.99 6.99 5 / 16 " #962-564-350 #962-564-350 #962-564-340 #962-564-330 #962-564-320 #962-564-420 #962-564-420 #962-564-410 #962-564-400 #962-564-390 #962-564-380 #962-564-370 #962-564-360 ington. Wide sights are for .22 rimfire rifles and Rem- muzzleloaders. and Marlin including ramps factory most fit sights Medium sunlight. Narrow sights fit Williams Streamlined and Shorty Ramps. the round, red beads glow; won’t “wash out” even in the strongest gather ambient light for superb visibility. The more light, the brighter Series -.531" (13.5mm) widebase. Series -.250"(6.3mm) widebase.MSeries-.340" (8.6mm) widebase. W width. Height ismeasured from bottom of dovetailtotopof sight. N base indicates W) or M (N, letter height, indicates Number dovetail. 3⁄8" SPECS: die#—RifleFireSight,2F16L14 ...... — Advise# perfect, money-saving kit for your shop. tion. Kit saves you approximately 50% over buying single beads. A yellow rods. 0.060"(2) (1.4mm)rods, diameterorange two(2)0.040"(1mm) diameter SPECS: choose a replacement Fire Sight Rifle Bead listed above. tains two, green, fiber optic dots; use with existing factory front or Williams adjustable, rear guide open sights. Aluminum blade con- WGOS R SPECS: Streamlined Dovetail Ramps. Williams Fits rod. optic fiber the reach to light of ty damaging accidental bumps. Open top allows plen- FIRE S optic rod. 2 Heights: .538" and.570". RearSights: Aluminum,blackmatte. Green fiber .450". Two (2).531" (13.5mm) sights tofitdirectlybarrel. inadovetailonthe sight bases(14 total). Heights: .260",.290",.312", .343", .375", .406", and (6.3mm) and(7).340" (8.6mm) widesights tofitnarrow andmediumfront SPECS: Front Sights: Bluedsteelbody. Redfiberopticrods. Seven(7).250" light. They fit low in out stand really dots optic fiber green, eye-grabbing, with fiber optic rods for replacement and repair. Aluminum, rear sights included are Also two rear dovetail sights barrel. and two sets of the six inch long, on directly mounting for rods optic fiber red with sights two both and plus widths, base medium and heights narrow different seven in sights front optic fiber red, contains kit tomers back to shooting quickly! Handy repairs and installations to get your cus- quick for on-hand sights popular most FIRE S #962-602-180 #962-602-180 #962-000-064 #962-000-064 #962-000-016 #962-000-016 #962-602-190 #962-602-190 TC HEIGHT/WIDTH STOCK # IGHT HOOD - Protects front blade from those - Have the Have - ASSORTMENT IGHT Blued steel. Fiber optic insert. Beads: 1⁄16" (1.6mm) dia. Fit nominal Steel, blue..630" (16mm) diameter. 1"(2.5cm) long. 1 / 4 " and Ft al standard all Fits - SLIDE/BLADE REAR EPLACEMENT 1 / 2 " (6.35cm) long.Replacement Rods:6"(15.2cm) long.Two 3 / 5 / 8 16 " dovetails and feature screw adjustment for eleva- 5 1 2F21A24 ...... 2F21B24 ...... 2F133C44 Williams FireSightAssortmentKit, Fire SightHood, / / " height only. 4 16 " FireSightWGOS Slide/Blade, " FireSightWGOS Slide/Blade, 260 M 290 M 343 M 406 N 260 N 290 N 450 N 343 N 312 M 375 N 312 N ...... lar centerfire and muzzleloading rifles Easy-to-install front sights for popu- Glowing, Fiber Optic Dots For RIFLE FIRE SIGHT #962-590-820 #962-590-820 #962-590-810 #962-590-800 #962-590-790 #962-590-830 #962-564-470 #962-564-460 #962-000-085 #962-564-450 #962-564-440 #962-564-430 2F10I19 ...... TC HEIGHT/WIDTH STOCK # Faster Sight Pickup WILLIAMS

500 W 406 M 500 M 538 W 450 M 570 W 437 W 538 M 375 W 570 M 375 M $ $ 18.99 $ $ 156.99

Office/Tech: 24.99 24.99 11.99 ab #962-000-065 #962-000-065 #962-000-067 #962-000-067 #962-000-066 #962-000-066 using only available, natural light for high visibility. a you gives and bright, glowing, screwsight picture. Fire 6-48 red, fiber one optic rod with glows brightly attaches ramp aluminum installation recommended. rel dia.of .875"; #70678- height =.634", fitsbarrel dia.of .650". Gunsmith - height =.410", fitsbarrel dia.of .625"; #70220-height =.485", fitsbar SPECS: of service. with only minor fitting. Machined from aircraft aluminum for years gives precise alignment sight forrear “U”-notch, long adjustable, Fully range light. shots. low Replaces in contrast factory prove sights dots offer quick sight alignment; won’t wash out in bright light, im- optic fiber rear, green and with ameter ghostringrear sight. Modelstofit2003 & Earliermuzzleloaders sets are availablewithastandard notch rear sight ora.15"(3.8mm) di rearWilliams installed factory sight. requireMay fitting. minor models withoutWilliamsfactoryrear sight. Knight Mk-85 fitsmodelswith with .836",guns newer fits spacing. hole c-to-c SPECS: ameter, .89" (22.6mm) - long.TC 1-piece rampedfront sights. #962-622-600 #962-622-600 #962-000-084 #962-000-083 #962-000-056 #962-565-300 #962-622-580 #962-622-570 #962-622-560 #962-000-055 #962-000-054 #962-622-550 For All Light Conditions Fast, Accurate Sighting Automatically calculate SIGHT CORRECTION STOCK # otatn rd front red Contrasting 3 / 8 " dovetailfront sight rampsor2003&Later muzzleloaderswith CNC machinedaluminum,black.Fire red fiberopticrod. #70105 Aluminum body, black,matte finish.Bead-.058" (1.2mm)di ONE PIECE FIRE SIGHT RAMP MUZZLELOADER FIRE SIGHT www.brownells.com/sightcalculator ab or front and rear SIGHT HEIGHT SIGHT CALCULATORS #70678 FireSightRamp, #70220 FireSightRamp, #70105 FireSightRamp, hunter, Timberridge&Cabela’s Traditional LightningFire, Buck- Rem 2003&Later, GhostRing Rem 2003&Earlier, G.Ring Rem 2003&Later, Notch Rem 2003&Earlier, Notch Knight Fire Sight TC NewEnglander TC OctagonBarrel CVA Optima/OptimaPro CVA RoundBarrel CVA OctagonBarrel TRYONLINE THE Visit our website at

rs. oi, n-ic, N machined CNC one-piece, Solid, brush. heavy through busting you’re when ramp 641-623-5401 Replaces Fragile, Plastic Ramps With WILLIAMS WILLIAMS No need to worry about breaking a sight FITS SIGHT Sturdy, One-Piece Metal ThompsonCenter. Octagonmodel CALCULATOR 2F16I14 ...... 2F16E14 2F16A14 Knight FireSightall fits

2F32M29 2F31N44 2F24A64 ab 2F32B29 2F32A29 2F32K29 2F39J94 2F24J64 2F32J29 2F32J29 2F31E44 ...... 11/18/2020 10:56:22 AM PRICE Remington $ $ 46.99 $ $ 28.99 $ 28.99 $ $ 36.99 $ 36.99 $ $ 37.99$ 37.99$ 37.99$ 37.99$ 37.99$ 37.99$

18.99 18.99 18.99 - - - WILLIAMS BLADES & BASES FOR WILLIAMS SIGHT SELECTION CHART RIFLE/SHOTGUN SIGHTS Rear Rear Williams Williams Tot. Frnt Rear Rear Williams Williams Tot. Frnt Rear Rear Williams Williams Tot. Frnt Rear Rear Williams Williams Tot. Frnt “WGOS” & “WDOS” SIGHTS Sight Blade Ramp Bead Height Sight Blade Ramp Bead Height Sight Blade Ramp Bead Height Sight Blade Ramp Bead Height Height Height Height abv. Bbl. Height Height Height abv. Bbl. Height Height Height abv. Bbl. Height Height Height abv. Bbl. Assemble Complete Sights Or REMINGTON 721, 722 WEATHERBY MARK V 6.5 JAP COMMERCIAL RIFLES Barrel Diameter 5-1/4" ahead of Receiver .750 Barrel Diameter 4-1/4" ahead of Receiver .730 Barrel Diameter 4-1/4" ahead of Receiver .735 Replace Blades To Change Barrel Diameter 22" ahead of Receiver .605 Barrel Diameter at Muzzle .555 Barrel Diameter 22" ahead of Receiver .635 BROWNING 30-’06 (FN Mauser) Height of Factory Ramp and Bead above Barrel .535 Height of Factory Ramp and Bead above Barrel - Height of Military Front Sight above Barrel - Sight Picture Barrel Diameter 4" ahead of Receiver .980 5D-JEMS or Barrel Diameter at Muzzle .585 FP-70, 5D-70 - 3/8" .312 .594 FP-98 (Fits Right FP-JAP - 7/16" .260 .604 Height of Factory Ramp and Bead above Barrel .700 WGOS-M 1/4" 5/16" .312 .531 or Left Hand) MS - 7/16" .312 .656 Precision-made sight bases WGOS-M 1/4" 5/16" .281 .500 WGOS-M 5/16" 3/8" .312 .594 WGOS-S 1/4" 5/16" .312 .531 WGOS-M 5/16" 3/8" .281 .563 and blades milled from high-tensile FP-98 - - .280 .594 WGOS-M 3/8" 7/16" .312 .656 WGOS-S 3/8" 7/16" .312 .656 WGOS-L 3/16" 3/8" .312 .594 WGOS-M 3/8" 7/16" .281 .625 strength, rustproof alloy. Dovetailed WGOS-L 1/4" 7/16" .312 .656 REMINGTON 760, 740, 742 WINCHESTER 61, 61 MAGNUM windage and elevation adjustments Barrel Diameter 4-12/" ahead of Receiver .800 7.7 JAP Barrel Diameter 5" ahead of Receiver .725 Barrel Diameter 4-1/4" ahead of Receiver .745 BROWNING 308 AND 270 (FN Mauser) Barrel Diameter 20-3/4" ahead of Receiver .600 have hardened gib locks. Make ad- Barrel Diameter 22-1/2" ahead of Receiver .584 Barrel Diameter 22" ahead of Receiver .620 Barrel Diameter 4" ahead of Receiver .980 Height of Factory Front Sight above Barrel (old style) .425 Height of Factory Front Sight above Barrel .260 Height of Military Front Sight above Barrel - justments quickly by loosening one Sq.-Notch Barrel Diameter at Muzzle .500 Height of Factory Front Sight above Barrel (new style) .640 U-Notch Height of Factory Ramp and Bead above Barrel .800 screw. No dovetailing of barrel neces- FP-760 or WGOS-S 3/16" 9/32" .281 .469 5D-JEMS or FP-JAP - 7/16" .260 .604 FP-98 - 7/16" .345 .689 5D-570/740 - 5/16" .281 .500 sary. Bases and blades sold separately. Blades can also replace the WGOS-M 1/4" 5/16" .312 .531 WGOS-L 3/16" 7/16" .281 .625 WGOS-M 3/16" 5/16" .281 .500 WINCHESTER 63 WGOS-M 5/16" 3/8" .312 .594 aperture on WGRS sights. ab WGOS-L 1/4" 7/16" .345 .689 WGOS-M 5/16" 7/16" .281 .625 Barrel Diameter 4" ahead of Receiver .715 WGOS-M 3/8" 7/16" .312 .656 SPECS: Bases and blades: aluminum, black anodized finish. Bases - All WRGS-760 - 7/16" .281 .625 Barrel Diameter 21-1/2" ahead of Receiver .565 BROWNING AUTO RIFLE Height of Factory Bead above Barrel .260 AMERICAN KRAG models except the One Inch have .5625" c-to-c hole spacing. Small - Barrel Diameter at Muzzle .605 Barrel Diameter 4-1/4" ahead of Receiver .890 Barrel Diameter at Dovetail .875 REMINGTON 788 .347" radius, fits .660" to .730" dia. barrels Medium - .395" radius, fits .730" FP-94 - 3/16" .312 .406 Barrel Diameter 21" ahead of Receiver .670 Height of Factory Ramp and Bead above Barrel .560 Barrel Diameter 4-1/2" ahead of Receiver .893 WGOS-S 3/16" 9/32" .281 .469 to .830" dia. barrels. Large - .440" radius, fits .830" to .930" dia. barrels. X- Barrel Diameter 4-1/2" at Muzzle .587 Height of Military Front Sight above Barrel .460 WGRS-BAR - 7/16" .345 .6895 Height of Factory Ramp and Bead above Barrel .826 FP-A-KRAG - 7/16" .312 .656 Large - .5625" c-to-c hole spacing .475" radius, fits .900" to 1" dia. barrels. WGOS-BAR- WINCHESTER 64, .30-30 WGOS-L 1/4" 3/8" .281 .563 Barrel Diameter 5" ahead of Receiver .782 One Inch - 1" c-to-c hole spacing, .500" radius, fits 1" dia. barrels. 26mm Special 3/16" 7/16" .345 .6895 FP-788 - 5/16" .312 .531 WGOS-L 5/16" 7/16" .281 .625 Barrel Diameter 22-1/2" ahead of Receiver .565 3 1 WGOS-BAR-L 3/16" 3/8" .281 .563 WGOS-L 3/8" 7/16" .345 .689 - .550" radius, fits 1" to 1.1" dia. barrels. Blades available in /16" (4.8mm), /4" Height of Factory Ramp and Bead above Barrel .435 5 3 (6.3mm), /16" (7.9mm), and /8" (9.5mm) heights. Range of adjustment for MARLIN 39A, .22 Caliber RUGER 10-22 Barrel Diameter 2" ahead of Receiver .860 FP-94 or GERMAN 98 MAUSER Barrel Diameter 4" ahead of Receiver .780 Barrel Diameter 4-1/4" ahead of Receiver .900 each listed in table below. Barrel Diameter at Muzzle .580 5D-94/36 - 5/16" .281 .500 Barrel Diameter 22-1/2" ahead of Receiver .675 Barrel Diameter 22" ahead of Receiver .600 Height of Factory Ramp and Bead above Barrel .412 WGOS-M 3/16" 5/16" .281 .500 Height of Factory Ramp and Bead above Barrel .350 Height of Military Front Sight above Barrel .485 WGOS/WDOS BASES

FP-39 or 5D-39 - 1/8" .312 .344 FP-RU - - - .450 Bead FP-98 or 5D-RU - - - .450 Bead WINCHESTER 69 STOCK # FOR SIGHT FITS BARREL DIAMETER WGOS-M 3/16" 9/32" .260 .448 Barrel Diameter 2-3/4" ahead of Receiver .782 5D-JEMS - 3/8" .281 .563 WGRS-RU - - - .450 Bead Barrel Diameter 23-1/4" ahead of Receiver .638 WGOS-L 1/4" 3/8" .281 .563 WGOS-L 3/16" - - .583 Bead #962-600-000 WGOS Small, .660" - .730" dia. MARLIN 336 Height of Factory Front Sight above Barrel .232 WGOS-L 3/8" 7/16" .345 .689 Barrel Diameter 4" ahead of Receiver .860 #962-607-000 WGOS Medium, .730" - .830" dia. Barrel Diameter 22" ahead of Receiver .640 WGOS-M 3/16" 9/32" .281 .469 91, 94, 95 MAUSERS RUGER 44 MAGNUM Barrel Diameter 4-1/4" ahead of Receiver .760 #962-608-000 WGOS Large, .830" - 930" dia. Height of Factory Ramp and Bead above Barrel .480 Barrel Diameter 4-1/4" ahead of Receiver .816 Barrel Diameter 22" ahead of Receiver .685 Barrel Diameter 17-1/2" ahead of Receiver .625 FP-36 or WINCHESTER 70 WESTERNER, STANDARD Height of Military Front Sight above Barrel .485 #962-611-000 WGOS X-Large, .900" - 1" dia., .5625" c-to-c Height of Factory Ramp and Bead above Barrel .475 Barrel Diameter 5-1/4" ahead of Receiver .790 5D-94/36 - 5/16" .312 .531 Barrel Diameter 22" ahead of Receiver .613 FP-98 or hole spacing WGOS-L 3/16" 9/32 .312 .500 FP-RU, 5DRU - 5/16" .312 .531 Height of Factory Ramp and Bead above Barrel .477 5D JEMS - 3/8" .281 .563 WGOS-M 3/16" 9/32" .312 .500 WGOS-M 1/4" 5/16" .312 .531 #962-609-000 WGOS One Inch, 1" dia., 1" c-to-c hole spacing REMINGTON NYLON 66, 76, 10, 11, 12 WGOS-M 3/8" 7/16" .345 .689 FP-70, 5D-70 - 3/8" .312 .594 WGOS-M 5/16" 3/8" .312 .594 Barrel Diameter 3" ahead of Receiver .625 WGRS-44 - 3/8" .281 .563 WGOS-M 3/16" 5/16" .281 .500 WGOS-M 3/8" 7/16" .312 .656 #962-626-000 WGOS 26mm, 1" - 1.1" dia. Barrel Diameter 18" ahead of Receiver .625 Height of Factory Ramp above Barrel .465 7.62 RUSSIAN M91 — Advise # — WGOS Base, 2F19N54 ...... $ 22.99 SAVAGE 24 V WINCHESTER 70 FEATHERWEIGHT Barrel Diameter 4-1/4" ahead of Receiver .750 FP-760N, Barrel Diameter 4-1/4" ahead of Receiver .795 Barrel Diameter 4-1/2" ahead of Receiver .505 Barrel Diameter 22" ahead of Receiver .650 #962-400-000 WDOS Base, 2F12M74 ...... $ 14.99 5D-760N - 3/8" .281 .563 Barrel Diameter at Muzzle .505 Barrel Diameter 20" ahead of Reciever .565 5D-510 (for round Height of Factory Ramp and Bead above Barrel .545 WGOS-M 1/4" 5/16" .281 .500 receiver) - 3/8" .281 .563 WGOS-L - 9/32" .312 500 WGOS-M 5/16" 3/8" .281 .563 BLADE HEIGHT & RANGE OF ADJUSTMENT WGOS-S 1/4" 9/32" .281 .469 5D-22/410 - 9/32" .260 .450 FP-70, 5D-70 - 3/8" .312 .594 WGOS-M 3/8" 7/16" .281 .625 WGOS-S 5/16" 5/16" .312 .531 WGOS-M 1/4" 3/8" .281 .563 BLADE TOTAL SIGHT HEIGHT WGOS-S 3/8" 3/8" .312 .594 #1 SMLE SAVAGE 99DL, .358 WINCHESTER 88 Barrel Diameter 4-1/4" ahead of Receiver .712 HEIGHT On WGOS Base* On WDOS Base Barrel Diameter 4-1/2" ahead of Receiver .800 REMINGTON 510, 511, 512 Barrel Diameter 4-1/4" ahead of Receiver .800 Barrel Diameter 22" ahead of Receiver .580 Barrel Diameter 22" ahead of Receiver .575 Barrel Diameter 4-1/4" ahead of Receiver .740 Barrel Diameter 20" ahead of Receiver .575 Height of Military Front Sight above Barrel .740 3/16" .369" (9.4mm)-.431" (10.9mm) .281" (7.1mm)-.345" (8.8mm) Height of Factory Ramp and Bead above Barrel .550 Barrel Diameter 23" ahead of Receiver .615 Height of Factory Ramp and Bead above Barrel .510 Height of Factory Ramp and Bead above Barrel .298 FP-SMLE or 1/4" .431" (10.9mm)-.493" (12.5mm) .345" (8.8mm)-.406" (10.3mm) FP-99S - 3/8" .260 .542 5D-SMLE - 7/16" .312 656 FP-88 - 5/16" .312 .531 WGOS-M 3/16" 5/16" .281 .500 WGOS-S 1/4" 5/16" .312 .531 5/16" .493" (12.5mm)-.555" (14.0mm) .406" (10.3mm)-.468" (11.9mm) 5D-510 - 3/16" .281 .375 WGOS-M 3/16" 5/16" .312 .531 WGOS-M 1/4" 3/8" .281 .563 WGOS-S 3/8" 7/16" .312 .656 WGOS-2 or M 3/16" 9/32" .281 .469 WGOS-M 3/8" 7/16" .345 .689 3/8" .555" (14.0mm)-.617" (15.7mm) .468" (11.9mm)-.531" (13.5mm) WGOS-S or M 1/4" 5/16" .312 .531 WGRS-100 - 3/8" .312 .594 #4 SMLE 3 REMINGTON 550 SAVAGE 99E (old style) Barrel Diameter 4-1/4" ahead of Receiver .775 #962-350-218 U-Notch Blade, /16", 2F9A59 ...... 11.99 Barrel Diameter 3-3/4" ahead of Receiver .870 WINCHESTER 94, .30-30, .32 WIN. Barrel Diameter 22" ahead of Receiver .630 1 Barrel Diameter 4-1/4" ahead of Receiver .730 #962-350-225 U-Notch Blade, /4", 2F9D59 ...... 11.99 Barrel Diameter 22" ahead of Receiver .607 Barrel Diameter 22" ahead of Receiver .585 Barrel Diameter 4" ahead of Receiver .745 Height of Military Front Sight above Barrel .770 Height of Factory Ramp and Bead above Barrel .500 Barrel Diameter 18-1/2" ahead of Receiver .600 5 Height of Factory Front Sight above Barrel .258 #962-350-231 U-Notch Blade, /16", 2F9Q59 ...... 11.99 Height of Factory Ramp and Bead above Barrel .450 FP-SMLE or 5D-SMLE - 7/16" .312 .656 3 WGOS-S or M 3/16" 9/32" .281 .469 FP-99S - 9/32" .312 .500 FP-94 or #962-350-237 U-Notch Blade, /8", 2F9Q59 ...... 11.99 WGOS-L 3/16" 3/8" .260 .542 WGOS-M 1/4" 5/16" .312 .531 5D-94-36 - 5/16" .260 .479 WGOS-M 3/8" 7/16" .312 .656 REMINGTON 552-572 BDL WGOS-S/M 3/16" 9/32" .281 .469 Barrel Diameter 4" ahead of Receiver .740 SAVAGE 99F, .308 #5 SMLE Barrel Diameter at Muzzle .625 Barrel Diameter 4-1/4" ahead of Receiver .717 Height of Factory Ramp and Bead above Barrel .570 Barrel Diameter 4-1/2" ahead of Receiver .665 WINCHESTER 100, . 243, .308 Barrel Diameter 20-1/4" ahead of Receiver .575 Barrel Diameter 20-1/2" ahead of Receiver .750 Barrel Diameter 4-1/4" ahead of Receiver .785 Height of Factory Ramp and Bead above Barrel .550 OD of Flash Hider Should be Cut to 750 FP-740 AP - - - .570 Barrel Diameter 20" ahead of Receiver .560 Height of Military Front Sight above Barrel .770 5D-572 - 9/32" .281 .469 Height of Factory Ramp and Bead above Barrel .440 FP-99S - 3/8" .260 .542 WGRS-54 - - - .570 FP-SMLE or WGOS-S 1/4" 3/8" .281 .563 WGOS-M 1/4" 9/32" .312 .500 FP-88 - 5/16" .260 .479 5D-SMLE - 9/32" .260 .448 WILLIAMS WGOS-M 5/16" 3/8" .312 .594 WGOS-M 3/16" 5/16" .281 .500 WGOS-S 1/4" 3/16" .345 .439 SAVAGE 99R, 99EG, .300 SAVAGE WGOS-M 3/8" 7/16" .345 .689 WGOS-S 5/16" 9/32" .312 .500 STREAMLINED DOVETAIL RAMP REMINGTON 572 Barrel Diameter 3-3/4" ahead of Receiver .875 WGRS-100 - 3/8" .345 .627 Barrel Diameter 3-1/2" ahead of Receiver .755 Barrel Diameter 22" ahead of Receiver .625 ’03 SPRINGFIELD Barrel Diameter 21-1/2" ahead of Receiver .619 Height of Factory Ramp and Bead above Barrel .550 ’03 Barrel Diameter 4-1/4" ahead of Receiver .930 Long & Graceful Height of Factory Front Sight above Barrel .326 MILITARY RIFLES Barrel Diameter 22" ahead of Receiver .660 FP-99S - 9/32" .260 .448 Height of Military Front Sight above Barrel .747 Polished and Blued Steel. FP-740 AP - 3/16" .312 .406 WGOS-L 3/16" 5/16" .312 .531 30 CARBINE WGOS-M 3/16" 9/32" .281 .469 Barrel Diameter 2-1/2" ahead of Receiver .700 FP-’03 or Screw-on models have two WGOS-M 3/16" 3/16" .375 .469 Barrel Diameter 18" ahead of Receiver .575 5D-JEMS - 9/16" .260 .729 attaching screws, one under sight and one on ramp. Hole spacing SAVAGE 110 Height of Military Front Sight above Barrel .450 WGOS REMINGTON 580, 581, 582, .22 Barrel Diameter 3-1/4" ahead of Receiver .775 Special 3/16" 7/16" .312 .656 on Remington model matches factory drilled and tapped barrels. ab Barrel Diameter 3" ahead of Receiver .625 Barrel Diameter 19-1/2" ahead of Receiver .575 WGRS-M1-CAR - 9/32" .312 .500 WGOS Barrel Diameter 23" ahead of Receiver .625 Height of Factory Ramp and Bead above Barrel .600 FP-30-M1 - 3/16" .260 .354 Special 5/16" 9/16" .281 .751 SPECS: Fractional height listed in table is the overall ramp height mea- Height of Factory Front Bead above Barrel .450 Military Rear - 9/32" .260 .448 751 sured from top of barrel to top of ramp. Decimal height listed is measured FP-110 - 7/16" .260 .605 WGOS-S 1/4" 3/16" .312 `.406 WGRS-54 - 9/32" .312 .500 WGOS-M 1/4" 3/8' .281 .563 WGOS-S 5/16" 9/32" .281 .469 ’03-A3 SPRINGFIELD from top of barrel to bottom of dovetail. Width of ramp is .250" (6.3mm). WGOS-S 3/16" 3/16" .312 .406 WGOS-M 5/16" 7/16" .281 .625 ’03-A3 Barrel Diameter 4-1/4" ahead of Receiver .900 Supplied without hood. WGOS-S 1/4" 9/32" .312 .469 Barrel Diameter 22" ahead of Receiver .600 1917 ENFIELD Height of Military Front Sight above Barrel .820 REMINGTON 700, 725 SAVAGE 340 Barrel Diameter 4-1/4" ahead of Receiver .890 STOCK # HEIGHT STYLE PRICE Barrel Diameter 5-1/4" ahead of Receiver .790 Barrel Diameter 3-1/4" ahead of Receiver .820 Barrel Diameter 22" ahead of Receiver .655 FP-’03-A3 or 3 Barrel Diameter 20" ahead of Receiver .590 Barrel Diameter 19" ahead of Receiver .600 Height of Military Front Sight above Barrel .780 ’03-A3 - 9/16" .312 .781 #962-020-097 /16" (.0975") Screw-On 2F23H79 $ 27.99 Height of Factory Ramp and Bead above Barrel .685 Height of Factory Ramp and Bead above Barrel .475 WGOS 7 16 FP-17 or Special 5/16" 9/16" .312 .781 #962-020-344 / " (.3445") Screw-On 2F23B79 $ 27.99 5D-JEMS - 7/16" .375 .719 WGOS 9 FP-70, 5D-70 - 3/8" .281 .563 FP-340 - 5/16" .312 .531 #962-020-469 /16" (.4695") Screw-On 2F23H79 $ 27.99 WGOS-M or L 1/4" 3/8" .281 .563 WGOS-M 3/16" 9/32" .345 .533 WGOS-L 1/4" 3/8" .281 .563 Special 3/8" 9/16" .345 .815 WGOS-M or L 3/8" 7/16" .345 .689 WGOS-M 3/16" 5/16" .312 .531 WGOS-L 3/8" 7/16" .375 .719 WGRS-’03-A3 - 9/16" .345 .814 #962-026-000 Streamlined Ramp Hood, 2F7D19 ...... $ 8.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 319

73 Sig20 p313-328.indd 319 11/18/2020 10:56:31 AM WILLIAMS RIFLE WILLIAMS FOOLPROOF & 5D RECEIVER SIGHTS FIRE SIGHT REAR SIGHT & SETS Dependable, Accurate Sights - Available For Most Guns includes a compact, FOOLPROOF RECEIVER SIGHTS - Inter- #962-157-520 Target Windage Knob, Long, 2F00PRR . . . $ 6.99 Upgrade Your Factory Sights With Easy-To-See, Fiber Optics nal micrometer adjustments lock posi- low profile, peep #962-157-530 Target Windage Knob, Short, 2F00KWK . . 6.99 sight and red, front tively to prevent accidental movement All sets feature a bright red, fiber optic, front sight and fully ad- of sight setting. No obstructions to im- #962-157-240 Target Elev. Knob, Long, 2F00FLF ...... 7.99 justable peep or U-notch, rear sight. U-notch, rear sight sets use Fire Sight. Fully ad- justable peep mounts pair and blot out shooter’s field of vision. #962-157-250 Target Elev. Knob, Short, 2F00BQN ...... 7.99 the highly accurate, 3-dot pattern with two green, fiber optic dots 1 to the rear scope Weighs only 1 /2 oz. Standard hole spacing #962-000-079 Elevation Gib Lock Knob, 2F00HLJ ...... 7.99 at the rear for sharp contrast and quick sight acquisition in all light to fit guns factory drilled and tapped for conditions. No drilling or tapping required for most rifle models. mount holes for easy receiver sight. Foolproof features adjust- 5D RECEIVER SIGHT - Same depend- Dovetailed front and rear sights may require minor fitting. ab installation. SPECS: Aluminum, ment screws for windage and elevation. able, accurate construction as the Fool- black anodized. Dove- Foolproof-TK comes equipped with target knobs. proof models but without micrometer REMINGTON FIRE SIGHTS - Fiber optic, U-notch, rear sight at- tail fits all Winchester SPECS: Alum., black, anodized. Steel screws. See chart below. adjustments. Windage and elevation ad- taches to the factory, rear and Marlin lever ac- — Advise # — Foolproof Sight, 2F63C74 ...... $ 74.99 justments are easily made by loosening

RIFLE/SHOTGUN SIGHTS RIFLE/SHOTGUN sight ramp to improve vis- tions with ramped front — Advise # — Foolproof-TK Sight, 2F00NDS ...... 71.99 screws, moving the sight, and re-tight- ibility; adjusts for windage sights. FP-94/36 fits ening the screws. Excellent for hunting and elevation. Contrast- Win. 94 top eject and FOOLPROOF TARGET KNOBS - All Foolproof rifle applications that don’t require regular ing, red, front sight really models 55, 63, 64, and 65; Marlin 36, 336, 1894, 1895 and 444. Will not sights (except TK models) use the Short Eleva- tweaking of the sight adjustment settings. stands out for fast pickup fit Win. 94/22. Requires two holes in the left side of the receiver and will Target Stop screw provides an accurate guide, so the 5D sightwill return tion Knob. The Long Elevation Knob is for use Knob and alignment. 2003 & Earlier fits Remington rifles and muzzle- require drilling and tapping on the newer guns. FP-336 fits Marlin 36, with Foolproof-TK target sights. † indicates to absolute zero upon detaching and reattaching to the gun. Stan- loaders with dovetailed, front sight ramps, plus all Remington shot- 336, 1894, 1895 and 444. Attaches to the top of the receiver and bolts Short Windage Knob, †† indicates Long Wind- dard hole spacing for easy, secure mounting. guns. 2003 & Later fits Remington rifles and muzzleloaders manu- up to factory drilled and tapped holes. WGRS-336 fits Marlin 336, 444, age knob. The Elevation Gib Lock Knob fits SPECS: Aluminum, black, anodized. Steel screws. Advise Stock # from factured from 2003 to present with 1-piece, ramped front sights. chart below. 44 and 1895. both standard Foolproof and Foolproof-TK Gib Lock SPECS: Aluminum, black anodized. #962-602-170 Dovetail Fire Sights, 2F33C14 ...... $ 38.99 models. ab Knob — Advise # — 5-D Sight, 2F35J69 ...... $ 41.99 #962-565-300 Remington Fire Sights, 2F24A64...... $ 28.99 #962-633-310 FP- 94/36 Fire Sights, 2F68B84...... 80.99 #962-000-056 2003 & Later Rem. Fire Sights, 2F24G64 28.99 #962-000-059 FP- 336 Fire Sights, 2F68A84 ...... 80.99 MODEL STK# FOOLPROOF´TK STK# 5D STK# FOOLPROOF #962-000-058 WGRS-336 Fire Sights, 2F40B79 ...... 47.99 AIRGUN #962-000-046 046 FP-AG-TK NA NA REMINGTON GHOST RING FIRE SIGHTS - Bright, BENJAMIN, 340, 342, 347 (need higher front sight) NA #962-150-790 5D-SH NA high contrast fiber optic sights with large aperture, BROWNING, B-92 #962-000-039 FP-94/36-TK NA #962-200-036 FP-94/36 † MARLIN RIMFIRE FIRE SIGHTS - Dovetail sights replace the fac- rear ghost ring provide fast, accurate sight align- BLR NA NA #962-200-072 FP-71 †† ment in all light conditions. The more light, the tory open sight sets on your DAISY, 99 & 299 NA #962-150-770 5D-JEMS NA brighter the beads glow. Front sight has a Marlin rimfire. U-shaped, single red insert, rear ghost ring has two green, fiber optic, rear sight ENFIELD 1917 & Br 14 NA #962-150-770 5D-JEMS NA green inserts to form an easy-to-align, contrasts well with the red, HIGGINS, 30/30 Lever #962-000-039 FP-94/36-TK #962-150-094 5D-94/36 #962-200-036 FP-94/36 † 3-dot sight picture. 2003 & Earlier front bead. Adjustable for JAP TYPE 38 & 99 NA #962-150-770 5D-JEMS NA windage and elevation. fits Remington rifles and muzzle- MARLIN, A-1 NA #962-150-081 5D-81 NA 3 SPECS: Aluminum, black anod- loaders with /8" dovetail front sight ramps, plus all Reming- ized. Model 60 also fits 915Y, 30-30 #962-000-039 FP-94/36-TK NA #962-200-036 FP-94/36 † 3 925, 925M, 981T, and 983T. ton shotguns with /8" dovetail 36 #962-000-039 FP-94/36-TK #962-150-094 5D-94/36 #962-200-036 FP-94/36 † front sight ramps. 2003 & Later #962-000-061 Marlin 25N/25NM Fire Sights, 2F23A79 . . $ 27.99 336 #962-000-062 FP-336-TK #962-150-001 5D-336 #962-200-002 FP-336 † fits Remington rifles and muz- #962-000-092 Marlin 60 Fire Sights, 2F23I79 ...... 27.99 39A #962-000-036 FP-39-TK NA #962-200-039 FP-39 † zleloaders manufactured from 80, 81 NA #962-150-081 5D-81 NA 2003 to present with 1-piece, ramped front sights. Both sets include front and rear sights. WGOS REPLACEMENT SLIDE/BLADE - 94 #962-000-039 FP-94/36-TK #962-150-094 5D-94/36 #962-200-036 FP-94/36 † 1 Rear slide/blade combo fits all standard SPECS: Black, matte finish. Fiber optic insert. Bead - /16" (1.6mm) dia. Ghost 93 #962-000-039 FP-94/36-TK NA #962-200-036 FP-94/36 † 3 size, Williams, adjustable, rear guide, open Ring - .15" (3.8mm) dia. aperature. 2003 & Earlier - Steel front /8" dovetail .44 Mag & 44 #962-000-039 FP-94/36-TK #962-150-094 5D-94/36 #962-200-036 FP-94/36 † sight bases. Converts traditional, rear iron sight. Aluminum rear sight. 2003 & Later - Aluminum front ramp sight and MAUSER 98 NA #962-150-770 5D-JEMS NA rear sight; includes steel 6-48 tpi front mounting screw. sights into Fire Sights. Aluminum blade contains a single, U-shaped, green, fiber 700 Left Hand NA #962-150-770 5D-JEMS NA #962-000-083 2003 & Earlier Ghost Ring Fire Sights, optic rod for 2-dot accuracy. Use with ex- SEARS Centerfire Lever #962-000-039 FP-94/36-TK #962-150-094 5D-94/36 #962-200-036 FP-94/36 † 2F31I44 ...... $ 36.99 isting factory front sight or with fiber optic, SHERIDAN, Model C NA #962-150-790 5D-SH NA #962-000-084 2003 & Later Ghost Ring Fire Sights, Williams Rifle Sight Bead found elsewhere in catalog. Available in SPRINGFIELD '03 NA #962-150-770 5D-JEMS NA 2F31C44 ...... 36.99 three heights. 3 1 5 THOMPSON/CENTER Contender NA NA #962-200-860 FP-T/C †† SPECS: Aluminum, black anodized. /16" (4.8mm), /4" (6.4mm), and /16" RUGER® 10/22® FIRE SIGHTS - (7.9mm) high. Hawken/Renegade NA NA #962-200-815 FP-Hawken †† 3 High visibility, fast to pickup, sight #962-000-081 /16" WGOS Slide/Blade, 2F21M24 ...... $ 24.99 WINCHESTER 9422 NA #962-150-094 5D-94/36 #962-200-810 FP-GR †† ® ® 1 systems for the Ruger 10/22 . #962-602-180 /4" Fire Sight WGOS Slide/Blade, 05, 07 & 10 NA NA #962-200-072 FP-71 †† WGRS features low profile, guide 2F21B24 ...... 24.99 55 & 65 #962-000-039 FP-94/36-TK NA #962-200-036 FP-94/36 † receiver, peep sight and red, fi- 5 #962-602-190 /16" Fire Sight WGOS Slide/Blade, 64 & 94 #962-000-039 FP-94/36-TK #962-150-094 5D-94/36 #962-200-036 FP-94/36 † ber optic, front sight. 3-Dot has 2F21A24 ...... 24.99 U-notch rear blade with green 71, Win/Brwg 1895 repro. NA NA #962-200-072 FP-71 †† dots, red front sight. Adjustable 86, Win/Brwg 1895 repro. NA NA #962-200-072 FP-71 †† for windage and elevation. WGOS REPLACEMENT SLIDE/GHOST RING - Rear slide/ghost 94 Angle Eject #962-000-040 FP-94SE-TK #962-150-195 5D-94SE #962-200-194 FP-94SE † ring sight fits all standard size Williams SPECS: Aluminum, black anodized. 241 #962-000-039 FP-94/36-TK NA #962-200-036 FP-94/36 † 1 Front - .530" high, /16" red fiber optic adjustable rear guide open sight bases. WEATHERBY, Mk V NA NA #962-200-098 FP-98 †† bead. Fits Ruger 10/22 only. Features a large light gathering ghost ring *Mounts in rear scope mount holes. †Short windage knob. ††Long windage knob. #962-633-300 WGRS-RU22 Fire Sights, 2F40C79 ...... $ 47.99 with two green, fiber optic dots for sharp contrast and quick sight acquisition in all #962-602-130 3-Dot Ruger Fire Sights, 2F20E39 ...... 23.99 light conditions. Ring aperature naturally centers to draw the eye to the front sight MARLIN & WINCHESTER LEVER ACTION FIRE SIGHTS - For Marlin for faster target acquisition and improved XS SIGHT SYSTEMS RIFLE and Winchester lever action rifles. Dovetail replaces factory front accuracy. Fully adjustable for windage and elevation. Rugged, low- just seconds, without gunsmithing, to any Weaver-style base. Fully and rear sights. Rear sight is screw adjustable for elevation and drift profile aluminum sight has an anodized finish for resistance against WEAVER BACKUP SIGHT adjustable for windage and elevation. Includes front Test Post. ab adjustable for windage; has two, green, fiber optic dots. Front has scratches. Use with existing factory front sight or with fiber optic, Excellent Insurance Against Scope Failure SPECS: Steel, blue, matte finish. .191" (4.8mm) diameter aperture. Weaver - .275" red, fiber optic rod. FP sight sets have a Foolproof, micro-adjust- Williams Rifle Sight Bead found elsewhere in catalog. (7mm), High Weaver - .500" (12.7mm) from top of base to center of aperture. 1 5 Ghost-ring aperture is a fast, alternative, SPECS: Aluminum, black anodized. /4" (6.4mm) high. Aperature - /32" (3.9mm) I.D. #006-105-000 Weaver Backup Sight, 6K62H99 . . . . . $ 69.99 able, peep sight and red, front Fire Sight. Peep mounts to existing open sight that will save your hunt if your scope fails. Perfect for use 1 holes in top or side of receiver, depending on model. WGRS-336 #962-000-082 /4" WGOS Slide/Ghost Ring, 2F8M79 . . . $ 10.99 on in-line muzzleloaders when hunting no-scope areas. Attaches in #006-105-001 High Weaver Backup Sight, 6K66M59 . . 73.99

GUARANTEED. FOREVER.®

PAGE 320 SINCE 1939 Office/Tech: 641-623-5401

73 Sig20 p313-328.indd 320 11/18/2020 10:57:58 AM XS SIGHT SYSTEMS RIFLE XS SIGHT SYSTEMS LEVER ACTION XS SIGHT SYSTEMS AK 47 LYMAN APERTURE REAR SIGHT APERTURE REAR & FRONT SIGHT SETS 24/7 TRITIUM STRIPE FRONT SIGHT NO. 2 TANG SIGHT RIFLE/SHOTGUN SIGHTS POST FRONT SIGHT Combines The Accuracy Of For Low-Light, Tactical Situations The Original No. 2; Now Back In Production Aperture Sights With The Fast Sighting With Ghost-Ring Apertures Machined, steel, front post features a tritium The original folding tang sight that Speed Of Open Sights vial for low-light target acquisition and an eye- increases sight radius for greater po- catching white outline for use during daylight The potential accuracy of aperture sights with the sighting Easy-to-see post front and tential accuracy with your favorite le- speed of open sights. All-steel construction. ab hours. Replaces factory windage drum and front ver action rifle. Sight features rugged, ghostring rear get you on target sight post. Each full turn of front post moves point fast for brush hunting and action all-steel construction, knurled locking APERTURE REAR SIGHTS - Easy-to-install, fully machined, all- of impact approximately 4" at 100 yards. Includes shooting. All steel construction, front/rear sets provide the correct screw, index marks on aperture post, .093" quick sight and .040" large steel sights with windage and elevation-adjustable bases are pre- installation instructions, tools, and locking adhesive. ab front sight for each model, eliminating the guess work of choosing disc apertures. Includes rear stock screw and front tang screw. ab machined to fit quickly using the rear scope base holes on many SPECS: Steel, matte black finish. Fits AK-47 rifles. sights. Easy-to-install, fully machined to fit existing rear scope base SPECS: Steel, blue. M-94, c-to-c 2.200", fits Winchester Model 94. M-36, popular rifles. A fast, accurate sight for brush hunting applications. and front sight holes/dovetails. Windage and elevation adjustable #006-000-150 AK-47 24/7 Front Sight, 6K66J59 . . . . . $ 73.99 c-to-c .845", fits Marlin Models 336, 30 and 1895. Win. 1886, fits original Adjustments are secured with dual setscrews. with dual set screws. Modified post front sight with vertical white line Winchester and Browning copies without tang safety. Some rifles may SPECS: Steel, blue, matte finish. .191" (4.8mm) diameter aperture. Marlin Lever, insert provides excellent target contrast, is quick to pick up in all light require drilling and tapping. Can be adapted to other rifles with tangs. Ruger® 10/22® and Rem. 700 fit factory, rear hole pattern. Win. 92 fits Model conditions. Includes .191" and .230" I.D. apertures. ab #539-050-002 Winchester 94 No. 2 Tang Sight, 92 and clones and Win. 94 Angle Eject. Win. 92 requires drilling and tapping SPECS: Rear – Steel, blue, matte finish. Win. 92 and Win. 94 Top Eject SMITH ENTERPRISE M 95 5K84M99 ...... $ 94.99 of receiver. Win. 94 Top Eject requires drilling and tapping of bolt. Use with require drilling and tapping of receiver. Front - Steel, blue, matte finish. #539-050-036 Marlin 36 No. 2 Tang Sight, 5K84J99 . . . . 94.99 .350" (8.8mm) post front sight. Mauser requires drilling and tapping, use .350" 3 Fits .250" or .340" wide front bases or nominal /8" dovetail, as noted. Post LONG RANGE SIGHT (8.8mm) front sight. Ruger Mini Thirty®/Ranch replaces factory aperture. #539-050-086 Winchester 1886 No. 2 Tang Sight, - .100" (2.7mm) wide with .030" (.76mm) wide stripe. Authentic Cowboy Action Look; 5K84G99 ...... 94.99 STOCK # FITS PRICE Great For Long Distance Shooting #006-103-300 Marlin 30AS, 336, 1894 6K57B59 $ 63.99 STOCK # FITS 3 8 Versatile, CNC-machined, steel sight #006-103-095 Marlin 1895 in 45-70, .444 6K57D59 $ 63.99 #006-000-140 Marlin 336 w/ / " dovetail barrel 3 lets you shoot both long and short dis- #006-000-141 Marlin 1895SS, 444SS w/ /8" dovetail barrel #006-103-098 Mauser 98 6K57J59 $ 63.99 tances. Flipped up, the ladder adjusts from #006-000-143 Marlin 39A ,w/ .250" & .340" wide front base #006-103-700 Rem. 700 6K57D59 $ 63.99 100-1100 yards; flipped down, the flat top, #006-103-014 Ruger Mini Thirty®/Ranch 6K57F59 $ 63.99 #006-000-144 Win. 92, 94 Angle Eject Big Bore w/dovetail barrel V sight provides fast target acquisition for SMITH ENTERPRISE #006-103-092 Win. 92/94 Angle Eject 6K57F59 $ 63.99 #006-000-145 Win. 94 w/ 20-24" dovetail barrel short shots. Ball detents provide an audible and felt click for each 3 #006-000-147 Win. 94 Trapper w/ dovetail barrel graduation on the ladder. Fits rifles with a /8" dovetail. ab WESSON & HARRINGTON 1 23 POST FRONT SIGHTS - Modified post front SPECS: Steel, black oxide finish. 2 /8" (5.4cm) long. Ladder provides 1 /64" — Advise # — Aperture & Post Sight Set, 6K81I69 ...... $ 85.99 3 sight with vertical white line insert is fast and (3.4cm) height adjustment. Fits rifles with a /8" (9.5mm) dovetail. LONG RANGE SIGHT easy to see in all light conditions. Variety of #851-000-046 M-95 Long Range Sight, 1E147M89 . . . . $ 173.99 Extremely Versatile Buckhorn Sight; heights to fit a wide selection of rifles. MARLIN INTEGRAL POST AND BASE SET - One-piece front base, 3 Sight, Base & Screws, All-In-One SPECS: Steel, blue, matte finish. Fits nominal /8" x plus a fully adjustable ghost ring .375" dovetail. .100" (2.54mm) wide post has .040" rear sight for Marlin lever guns. Precision-machined, buckhorn, (1mm) wide stripe, heights listed in chart. Heights measured from top of Hunters and competitive shooters rear sight and base include screws alike will benefit from the faster blade to bottom of dovetail. Includes Test Post Sight. the Marlin 1894, 1895 or Marlin that fit the holes in your Wesson sighting offered by the .191" and 336/308MX Lever Rail Ghost Ring & Harrington rifle for drop-on, no STOCK # HEIGHT PRICE .230" inside diameter rear aper- set (above). Extra-long rail gives gunsmithing installation. Slider has a detent that lets you feel each #006-113-250 .250" (6.35mm) 6K30K59 $ 35.99 tures and .100" wide, white line front sight blade. Ghost Ring sets plenty of versatility in mounting adjustment; setscrew locks into place. Ladder has side markings so include a rear ghost ring sight that mounts directly to the receiver #006-113-300 .300" (7.62mm) 6K30H59 $ 35.99 scope directly over the receiver or you can easily repeat the right yardage settings. Drift adjustable for without drilling and trapping. Lever Rail Ghost Ring sets include a #006-113-350 .350" (8.89mm) 6K30P59 $ 35.99 forward over the barrel for inter- windage; setscrew locks your setting. ab rear ghost ring sight that mounts in the milled sight recess on the #006-113-400 .400" (10.16mm) 6K30Q59 $ 35.99 mediate eye relief optics or red dot sights. Requires removal of SPECS: Machined steel, blued finish. Sight - Ladder has approximately XS Sight Systems Lever Rail (available separately below). 27 5 6K30A59 factory rear sight. Gunsmith installation recommended. 1 /64" (3.6cm) height adjustment; Buckhorn aperture /16" (8mm) I.D. Base #006-113-500 .500" (12.7mm) $ 35.99 SPECS: Steel, black, matte finish. 1895 Ghost Ring Set - Fits Marlin 1895 19 3 SPECS: Aluminum, black, matte finish. 11" (27cm) long, .830" (21mm) - /64" (7.5mm) high from bottom of receiver to top of base, 2 /4" (7cm) with .700" and 1.00" c-to-c front ramp screws. .528" high front sight mea- 5 wide. 3 oz.(85g) weight. Includes mounting hardware. long, /8" (15.9mm) wide. sured from top of barrel to top of blade. 336/1894/30AS Ghost Ring #851-000-045 Wesson & Harrington Sight, Set - Fits Marlin 336, 1894, and 30AS with .700" c-to-c front ramp hole #006-000-170 Marlin 1894 Lever Rail, 6K57A59 . . . . .$ 63.90 1E158C94 ...... $ 186.99 spacing. Lever Rail Ghost Ring Sets - For XS Lever Rail applications only. #006-000-151 Marlin 1895 Guide Gun Lever Rail, XS SIGHT SYSTEMS Models available for Marlin 1895 and 336. 6K57F59 ...... 63.90 #006-000-033 1895 Ghost Ring Set, 6K89H99 ...... $ 99.99 #006-000-165 Marlin 336/308MX Lever Rail, 6K57I59 ...... 63.90 COWBOY FRONT EXPRESS SIGHT #006-000-024 336/1894/30AS Ghost Ring Set, Faster To Find Than Factory Sights; Legal For 6K89G99 ...... 99.99 MARLIN 1894/1895/336/308MX LEVER RAIL SIGHT SYSTEM - SASS Competition #006-000-162 1895 Lever Rail Ghost Ring Set, Convenient kit combines the XS SIGHT SYSTEMS AK 47 6K89H99 ...... 99.99 lightweight Lever Rail one-piece Get your Cowboy lever rifle on target faster and #006-000-164 336 Lever Rail Ghost Ring Set, scope rail with backup iron sights TRITIUM EXPRESS SIGHT SET enjoy higher overall scores. White dot express-style 6K89B99 ...... 99.99 for mounting on your Marlin lever front sight works with either your factory rear or and rifle without drilling and trapping. Big Dot Front Sight Puts aftermarket ladder-adjustable rear “V”. Provides ex- Rear ghost ring is fully adjustable DRC WINGED 1895 GHOST-RING SIGHT SET - Give your 1895 You On Target Fast; Fully tremely fast pick-up in all light conditions, so you can knock down for windage and elevation, with Adjustable Rear Sight For those steel cowboy targets even faster. Includes instructions plus Guide Gun an extremely durable sight interchangeable .191" and .230" Improved Accuracy two nylon try-sights to help establish required front sight height that withstands the toughest hunting diameter apertures for fine-tun- before actual sight installation. ab and field use. Sturdy steel wings pro- ing accuracy. One-piece front sight has .100" wide white-line post. High visibility sight com- SPECS: All-steel, matte finish, black. .500" (12.3mm) high, .148" (3.7mm) tect the rear sight body from damage. SPECS: Lever Rail - Aluminum, black, matte finish. 11" (27cm) long, .830" bination easily replaces the 3 Windage and elevation adjustable, thick blade, nominal /8" (9.mm) wide dovetail. Fits Winchester legacy lever (21mm) wide. 3 oz. (85g) weight. Includes mounting hardware. Sights - factory sights on your AK-47 or variant for fast sight acquisition in action rifles and Marlin Cowboy rifle, all calibers. ghost-ring rear furnished with .191" Steel, matte black finish. Front sight: .100" wide, .528" high measured from high stress or low light conditions. Machined steel set includes an #006-000-155 .500" Express Front Sight, 6K30C59 . .$ 35.99 and .230" diameter apertures. One- top of barrel to top of blade. 1895 fits Marlin 1895 with .700" (17.8mm) and adjustable white stripe, V-notch rear sight and a genuine Trijicon piece front post and base has highly visible, .100" wide, white line, 1" (2.5cm) c-to-c front ramp screws. 336 fits round barrel Model 336 only. brand titrium lamp with large white ring for the front. Front sight front post. completely replaces the factory windage drum and front sight post. SPECS: Steel, black, matte finish. 1895 - Fits Marlin 1895 with .700" and #006-000-167 Marlin 1894 Lever Rail Sight System, 6K145G80 ...... $ 162.00 Large, single setscrew in the tangent rear sight provides fine adjust- 1.00" c-to-c front ramp screws. .528" high front sight measured from top ments for elevation; dual setscrews in the dovetailed rear V-notch #006-000-166 Marlin 1895 Lever Rail Sight System, Stock numbers shown in red indicate of barrel to top of blade. block securely lock-in your windage settings. Includes installation 6K145A80 ...... 162.00 the product is made in the U.S.A. #006-000-037 DRC 1895 Marlin Sight, 6K120Q59 . .$ 133.99 tools, thread locking agent, and detailed instructions. ab ab #006-000-168 Marlin 336 Lever Rail Sight System, SPECS: Steel, black, matte finish. Front Sight - .160" (4.1mm) diameter This information is not available for all MARLIN 1894/1895/336/308MX LEVER RAIL - Lightweight scope 6K145H80 ...... 162.00 white ring with .075" (1.9mm) diameter tritium lamp. Rear Sight - .140" products at time of catalog production, but will be rail mounts to Marlin centerfire lever gun without drilling and trap- #006-000-169 Marlin 308MX Lever Rail Sight (3.6mm) high vertical white stripe. Fits AK-47 and clones. regularly updated on our website. ping. Accepts Weaver-style or Picatinny accessories, including System, 6K169L57 ...... 179.10 #006-000-161 AK-47 Tritium Express Set, 6K115C19 . . $ 127.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 321

73 Sig20 p313-328.indd 321 11/18/2020 10:59:07 AM MARBLE IMPROVED MARBLE TANG SIGHT BRADLEY™ PEEP TANG SIGHT FITS POST STK# SIGHT STK# SCREWS Period Looks, Superb Accuracy SIGHT BEAD Springfield 1870 L #579-000-167 #579-000-125 Adds a touch of authenticity to pump and The Original “Bead-On-A-Block” Interchangeable Posts For Quick Taurus M62 L #579-000-168 #579-000-100 lever action rifles, whether they’re used for hunt- Change From Short- To Long-Range Taylor 1874 Sharps L #579-000-167 NA ing or Cowboy Action Shooting. Provides better Standard Bradley - Places the front sight bead on a block of steel Configuration Thompson/Center Scout L #579-000-167 #579-000-100 sight definition and faster target acquisition in for positive indexing, greater surface area and increased strength. the field or on the range. Locates the aperture Uberti 1873 (not incl. Hunter) S #579-000-166 #579-000-100 Available in red and white colored plastic or gold brass beads. Solid Gives the single-shot or lever gun closer to the eye for a clear sight picture; lon- Brass Bradley - Uniform yellow brass (gold) or white brass (silver) shooter the period looks of a tradi- Uberti 1885 L #579-000-167 NA ger sight radius increases accuracy. All steel beads with positive-stop skirts. ab tional tang-mounted peep sight, plus Uberti 1886 S #579-000-166 #579-000-100 construction with micrometer adjustments for SPECS: Standard Base - steel, blue. Bead - plastic, red, or white. Brass new adjustability features that allow fast Uberti 1892 L #579-000-167 #579-000-100 windage and elevation. Folds to the rear for stor- Beads - gold or silver. Metric beads are all white color. age. Mounting screw set must be purchased separately. ab changes from short- to long-range set- Uberti Henry L #579-000-167 NA STANDARD BRADLEY BEADS tings. Great for the cowboy shooter who SPECS: Steel, blued. Older guns may require drilling and tapping. Includes Uberti Rolling Block L #579-000-179 #579-000-100 1 wants to use the same gun in cowboy competition and long-range (2) /2" diameter apertures: .055" (1.4mm) and .102" (2.6mm) size holes, STK# EA. STK# 3´PAK BEAD TPI SHANK COLOR 3 side matches, or as an alternative to vernier-type sights on single- Varner Favorite S #579-000-166 #579-000-124 and (1) /4" diameter aperture with .032" (.81mm) hole. Savage 99 will not

RIFLE/SHOTGUN SIGHTS RIFLE/SHOTGUN SIZE LENGTH shot rifles used in BPCR and other long-range competitions. Each Winchester 1866 L #579-000-167 #579-000-102 fit late rifles with top safety. Late rifles with safety at trigger will require 1 5 drilling and tapping. Mounting screw sets sold separately. #146-184-011 #146-184-031 /8" 3-56 /32" Red sight comes with a post that is the correct height to regulate the Winchester 1873 L #579-000-167 #579-000-119 1 5 #146-184-012 #146-184-032 /8" 3-56 /32" White same as the original factory iron sights. Click adjustable for windage Winchester 1876 & 1886 S #579-000-174 NA 1 TANG SIGHT & REPLACEMENT SCREWS 1 5 and elevation; each click is approximately /4" of adjustment at 100 #146-184-013 NA /8" 3-56 /32" Gold (original) 1 5 yards. For larger elevation changes, you can easily swap in a higher STK# STK# SCREWS FITS #146-186-011 #146-186-031 /8" 6-48 /64" Red or lower post (available below); choose a lower post for close-in Winchester 1885 (original) L #579-000-167 #579-000-103 1 5 #579-009-824 NA Browning 1892, 53, 65 (Japan mfr) #146-186-012 #146-186-032 /8" 6-48 /64" White shooting and a taller post for longer ranges. All components are pre- Win. 1885 Low- & High-Wall L #579-000-167 #579-000-100 1 5 #146-186-013 NA /8" 6-48 /64" Gold cision CNC machined from 4140 steel, with critical parts heat-treat- #579-009-800 #579-000-132 Browning 1885 w/tang (Japan mfr) 1 9 ed for extra strength. To purchase, find your gun in the left column, #579-009-804 #579-000-114 Glenfield 30, Marlin 39, 1892, 1894 #146-187-012 #146-187-032 /8" 6-48 /64" White Winchester 1890, 62, 64, 65 L #579-000-167 #579-000-117 5 5 then find the correct sight kit and mounting screw set for it in the (Cowboy), 1897, 1897 Annie Oakley #146-532-412 #146-532-432 /32" 3-56 /32" White Win. 1892 (original) & 1894 L #579-000-167 #579-000-102 5 7 right column. Use with Marble’s front sights, available separately. ab #146-532-712 #146-532-732 /32" 6-48 /64" White (all, exc. .22 cal) #579-000-150 #579-000-105 Henry Lever Action .22S/L/LR & 5 9 SPECS: Steel, blued. Drilling and tapping may be required for installation #146-532-812 #146-532-832 /32" 6-48 /64" White Winchester 1892 (w/tang S #579-000-178 #579-000-123 .22 Mag. on older guns. Sight kit includes base, Low (L) or Standard (S) height post, 5 1 1 #146-532-912 #146-532-932 /32" 8-40 /8" White /2" O.D. aperture disc with .055" peep, and Allen wrench. safety) #579-009-833 #579-000-100 Henry Golden Boy .22LR Winchester 1895 (original) S #579-000-176 #579-000-116 #579-000-084 #579-000-102 Henry Big Boy .44 — Advise # — Standard Bradley Bead, each, 6D6A74 . . . .$ 8.99 — Advise # — Standard Bradley Bead, 3-pak, 6D18E74 . . 24.99 FITS POST STK# SIGHT STK# SCREWS Winchester 1895 (w/tang S #579-000-176 #579-000-113 #579-009-829 #579-000-124 Marlin 1893 & 1894 (original mod- American Arms 1874 Sharps S #579-000-166 #579-000-124 safety) els made prior to 1932 only) METRIC BRADLEY BEAD Winchester 1906 L #579-000-167 #579-000-117 #579-009-805 #579-000-114 Marlin 336/1895, 444S Armi 1874 Sharps L #579-000-167 #579-000-131 STK# EA. STK# 3´PAK BEAD SIZE TPI #579-009-827 #579-000-124 Marlin 25, 27, 29, 39A, 1892, 1897 Ballard No. 8 Union Hill L #579-000-168 NA Winchester 53, 55 L #579-000-167 #579-000-102 1 (original) Ballard #8 Union Hill, Sav- #146-000-001 #146-000-005 /8" 2.5mm Browning 1885 w/tang L #579-000-167 #579-000-132 Winchester 9422 (.22LR) L #579-000-170 #579-000-120 1 age 30G, Stevens Favorite #146-000-002 #146-000-006 /8" 3mm Browning 1885, 78 w/o tang L #579-000-167 #579-000-125 Marlin 1893 & 1894 (original NA #579-000-124 5 #579-009-819 #579-000-100 Remington Model 1, 2, 5 #146-000-004 NA /32" 3mm Browning 1886 S #579-000-174 NA models made prior to 1932 #579-009-807 #579-000-101 Rossi 1892, 65 Browning 1892, 53, 65 (Japan L #579-000-167 NA only) — Advise # — Metric Bradley Bead, each, 6D9D74 . . . . $ 12.99 #579-000-015 #579-000-124 Savage 99 (see price below) mfr) Henry Golden Boy .22LR NA #579-000-100 — Advise # — Metric Bradley Bead, 3-pak, 6D26L24 . . 34.99 #579-009-811 #579-000-105 Uberti and Cimarron 1866 Browning 1892 w/tang safety S #579-000-178 #579-000-123 Win. 1886 (Japan), Browning NA #579-000-112 BRASS SKIRTED BEADS #579-000-003 #579-000-105 Uberti and Cimarron 1873 Browning 1895 (Japan mfr) S #579-000-176 NA 1886 Henry Lever Action .22S/L/LR NA #579-000-105 #579-000-149 #579-000-132 Uberti 1885 STK# EA. STK# 3´PAK TPI COLOR SIZE Browning 71LT S #579-000-174 NA 1 & .22 Mag. #579-009-808 #579-000-102 Win. 53, 55, 64, 1892 (original), #146-003-013 #146-003-033 6-48 Gold /8" Cimarron 1866 S #579-000-166 #579-000-109 1 Glenfield 30, Marlin 39, 1892, NA #579-000-114 1894 (except .22) #146-010-113 #146-010-133 3-56 Gold /16" Cimarron 1873 S #579-000-166 #579-000-133 1 1894 (Cowboy), 1897, 1897 #579-009-803 #579-000-117 Win. 62, 1890, 1906 #146-020-114 #146-020-134 3-56 Bright Silver /16" Colt Lightning (small frame) S #579-000-173 #579-000-128 1 Annie Oakley #579-000-001 #579-000-100 Win. 1885 Low Wall (Japan) NA #146-005-033 5-40 Gold /8" EMF 1874 Sharps (not carbine) L #579-000-167 #579-000-131 1 Henry Big Boy .44 NA #579-000-102 #579-009-800 #579-000-100 Win. 1885 Hi-Wall (Japan), TC NA #146-030-135 3-56 Dull Sliver /16" H&R Buffalo Classic L #579-000-167 #579-000-125 Win. 62, 1890, 1906 NA #579-000-117 Scout — Advise # — Brass Skirt Bead, each, 6D3Q19 ...... $ 3.99 Henry .22LR Lever (H001 & L #579-000-167 NA #579-009-801 #579-000-118 Win. 1876 & 1886 (original) H001T, not H001V) — Advise # — Peep Tang Sight, 9G115Q19 ...... $ 143.99 — Advise # — Brass Skirt Beads, 3-pak, 6D8E79 ...... 10.99 #579-009-806 #579-000-112 Win. 1886 (Japan), Browning 1886 Henry Golden Boy .22LR S #579-000-173 #579-000-105 — Advise # — Tang Sight Screw Set, 9G6K74 ...... 8.99 #579-000-085 #579-000-108 Win. 94 (tang safety), 94 Legacy, 94 (H004) & .22 Mag (H004M) — Advise # — Mounting Screw Set For Marble Tang Trails End™ Henry Big Boy .30-30, S #579-000-166 #579-000-116 Sight, 9G6N39 ...... 7.99 — Advise # — Marble Tang Sight, 9G109P64 ...... $ 128.99 .357/.38, .44 Mag. & .45 Colt SIGHT POSTS - The Improved Tang Sight’s quick-release post sys- Marlin 1889, 1892, 1893, L #579-000-168 #579-000-124 tem makes it easy to replace the post that came with your sight — Advise # — Mounting Screw Set For Marble Tang MARBLE SHOTGUN SIGHT 1894, 25, 27, 29, 39, 39A (old/ with a higher or lower one for targeting at different ranges.Choose Sight, 9G6L39...... 7.99 3 Styles of Thread-In Sights original models) a lower post for close-in targets or a taller post for longer ranges. EXPERT TYPE - A beautiful sight for most ribs. Shoul- Marlin/Glenfield 30A, 30AS, L #579-000-170 #579-000-114 Post height is also click adjustable for fine-tuning when sighting 1 ders on sight make for easy installation. in; each click represents /4" of adjustment at 100 yards. A jam nut 1 3 30GT SPECS: Bead: /8" (3.2mm). Shank length: /32" (2.4mm). Gold locks the elevation, so you can remove and reinstall a post without bead with 3-56 thread or Ivory (white plastic) bead with 3-56 Marlin 39A, 39AS, 39M, L #579-000-170 #579-000-114 losing settings. or 6-48 thread. ab 39TDS (current models) SPECS: Steel, blued. Heights measured from base of post to center of SMITH ENTERPRISE 1 #708-310-332 3-56 Expert, Ivory, 9G6K74 ...... $ 8.99 Marlin 336, incl. 444SS, S #579-000-176 #579-000-114 aperture. Low - 1.085" to 1.415" height adjustment range. /2" aperture 1895G, 1895SS disc with .055" peep. Standard - 1.341" to 1.876 height adjustment range. FLIP UP REAR SIGHT #708-310-632 6-48 Expert, Ivory, 9G6D74 ...... 8.99 3 Medium - 1.875" to 2.965" height adjustment range. /4" aperture disc with Remington Model 1, 2, 5 S #579-000-173 #579-000-130 3 Two Sight Pictures In One EXPERT FIBER OPTIC - A bright, eye catching, fiber optic .032" peep. High - 2.820" to 4.770" height adjustment range. /4" aperture Rem. No. 1 Rolling Block L #579-000-179 #579-000-100 sight for ribs. Shoulders on sight make for easy installation. disc with .032" peep. Machined from bar stock with integral 3 (current mfr) SPECS: Bead: .0700" (1.7mm) dia. Shank length: /32" (2.4mm). #579-000-096 Tang Sight Post, Low, 9G38J24 ...... $ 44.99 spring base. Flip it down, it’s a fast pointing Buckhorn sight; flip it Thread size: 3-56 or 6-48. Color: Green or Orange . Rossi 1892, 65 L #579-000-167 #579-000-101 #579-000-097 Tang Sight Post, Std, 9G40K79 ...... 47.99 up, it’s an elevator for long range shooting. Use on blackpowder Rossi 59, 62 L #579-000-167 NA cartridge rifles at ranges from 500 to 800 yards with .45-70 and STK# 3´56 THREAD STK# 6´48 THREAD COLOR #579-000-098 Tang Sight Post, Mid-Range, other straight-walled cartridges. ab #708-305-331 #708-305-631 GREEN Savage 30G Stevens Favorite L #579-000-168 #579-000-124 9G59C19 ...... 73.99 3 1 SPECS: Steel, blued, matte finish. Fits nominal /8" dovetails. 2 /4" (5.7cm) #708-305-332 #708-305-632 ORANGE Shiloh Sharps 1874 & New L #579-000-167 NA #579-000-099 Tang Sight Post, Long-Range, long. Provides 1.75" (4.4cm) total sight elevation. Model 1874 9G48A79 ...... 60.99 #851-000-026 Flip-Up Rear Sight, 1E160D64 ...... $ 188.99 — Advise # — Expert Fiber Optic Sight, 9G7Q99 ...... $ 9.99

GUARANTEED.GUARANTEED. FOREVER.FOREVER.®

PAGE 322 SINCE 1939 Office/Tech: 641-623-5401

73 Sig20 p313-328.indd 322 11/18/2020 10:59:32 AM PEDERSOLI HIVIZ SHOTGUN

SHOTGUN SIGHT RIFLE/SHOTGUN SIGHTS COWBOY TARGET RIFLE SIGHTS CONVENIENCE KIT FIBER OPTIC SIGHT #638-000-032 FlashPoint Sights, 8C26C34 ...... $ 30.99 Superb Long-Range Accuracy & The Right Period Styling #638-000-033 TriComp Sights, 8C25B69 ...... 29.99 The Tools & Sights You Need To Install/ Improves Target Visualization Single-shot rifles of the Old West are capable of tremendous Replace Sight Beads SPARK II SIGHT - Highly visible, fiber optic range and accuracy, but fixed, factory sights rarely allow these guns Light gathering, polymer rod front sight features a unique, interchange- to reach their full potential. In the days before compact scopes, Everything you need to achieve a Professional shotgun sight works in low light as well as bright able mounting post system for easy installa- target shooters and hunters seeking tack-driving accuracy relied repair or installation. Each kit includes the right drill bit and bottom- to provide an easy-to-see, fast- tion on most major brands of shotguns with on precisely adjustable vernier tang-mounted rear sights and globe ing tap, plus sight(s) to help you clean up existing threads or install a pointing dot. Four colored rods let plain or ribbed barrels. Pre-tapped, steel front sights. Pedersoli offers BPCR silhouette shooters, competi- sight with a larger, stronger shank. The Brownells 6-48 Kit features you change sights to fit shooting sight base accepts five, included mounting tors, and Cowboy Action shooters taking part in Schuetzen side two, #4 brass front beads. Each Bradley kit has an Ivory, Bradley- conditions. Locating fingers on each end center the sight on your posts to accommodate shotguns drilled and tapped for 6-48, 5-40 type front sight. ab rib; two strong magnets prevent movement. ab or 3-56, plus the popular 3mm x .5 or 3mm x .6 metric sizes. Bright, matches affordable, high-quality replica sights that function just 3 SPECS: Bradley sights have /32" (2.38mm) long shanks. SPECS: Base - Plastic, black. Rods - Polymer, red, green, yellow, orange. fiber optic LitePipe provides superior light transmission from dawn like the originals. Get your Winchester 1885, Rolling Block, Sharps, 7 #078-021-048 6-48 Brownells Kit, 8G11K69 ...... $ 12.99 .170" (4.3mm) diameter sighting dot. M-300 - fits ribs /32" (5.5mm) to ‘til dusk, perfect for low light hunting conditions, as well as com- Ballard, Trapdoor Springfield, or other vintage single-shot rifle per- 5 5 7 forming—and looking—its best. #078-021-256 3-56 Bradley Sight Kit, 8G11K04 ...... 12.99 /16" (8.2mm) wide. M-400 - Fits ribs /16" (8.2mm) to /16" (11.3mm) wide. petition and self defense guns where fast sight acquisition is para- #638-300-000 M-300 Fiber Optic Sight, 8C17N59 . . . . . $ 21.99 mount. Requires drilling and tapping on shotguns with factory, #078-021-248 6-48 Bradley Sight Kit, 8G00JIQ ...... 15.99 press-fit bead sights. ab “CREEDMOOR” REAR TANG SIGHTS - #638-400-000 M-400 Fiber Optic Sight, 8C17I59 ...... 21.99 Named after the famous range on Long SPECS: Sight Base - Steel, blue finish. .204" (5.2mm) long x .137" (3.5mm) Island that hosted many long-range rifle wide. Bead - Polymer, available in Red or Green. .362" (9.2mm) long x .106" COMP SIGHT - Light gathering, poly- competitions in the 1870s and ‘80s, the (2.7mm) diameter. Sight Height - .167"(4.2mm) high from top of barrel to mer rod provides an easy-to-see dot Creedmoor ladder-type sight is fully ad- MARBLE top of bead. 6-48 fits Remington, Weatherby, SKB and Ithaca. 3-56 fits in low light and bright daylight. Steel justable for windage and elevation and Browning Citori target guns, Benelli, Beretta, Ruger, and Winchester. 5-40 base replaces front bead, screws on for works equally well on cartridge rifles and TRITIUM SHOTGUN SIGHT fits Mossberg. 3mm x .5 fits Browning Gold and Citori field guns. 3mm x a secure mount. Includes eight inter- muzzleloaders. Sight is precision ma- .6 fits Browning Citori Hunter. Gets You On Target Quickly In changeable light pipes, three orange, chined from steel and attaches to tang #638-000-016 Red Spark II Sight, 8C8K79 ...... $ 10.99 Low & Regular Light three green and two white in three with supplied setscrews and folds down #638-000-088 Green Spark II Sight, 8C8J79...... 10.99 diameters: .105", .115" and .130" for when not in use. The Universal model CNC-machined, steel sight uses eye-catching competition, law enforcement and field use. Four sight mount- is available in middle-range 2" and long-range 3" tritium to provide a fast sight picture in low light and an easily-no- FOUR IN ONE II SIGHT - High-con- ing screws are supplied to fit nearly all shotgun ribs, plus a rotary heights. The windage adjustment mechanism is ticeable, white ring for regular light. White ring is recessed to protect trast, light gathering front and rear carrying case for storing light pipes and spring release key. ab on the eyepiece, allowing the eyepiece to dropped it from being scratched and to ensure proper light reflection from sights for Browning, Benelli, Moss- SPECS: Steel base, matte black. 1" (2.5cm) long. Screw/fits: 3-56" for Ru- close to the base for close-in shots. The Soule model any angle. Five different thread diameters fit most shotguns. ab berg and Winchester shotguns can 3 ger, Beretta/Benelli, Browning Target Citori, Krieghoff; M3X.5" for Brown- provides maximum adjustability to fit any hunting or SPECS: Steel, blued, matte finish. Approximately .32" (8.1mm) long, /16" be used with the front only for wing 3 ing Gold and Citori Field; 5-40" for Mossberg; 6-48" for Remington (with target shooting conditions. Elevation is adjustable in (4.8mm) wide, .21" (5.4mm) high. /32" (2.4mm) shank length. See price line shooting or in combination with the threaded bead) and SKB sporting models. precise increments of 1 MOA, and one full turn of the for thread diameter. 6-48 Oversize (OS) has a diameter of .146" (3.7mm). rear for a precision rifle-type sight. windage knob moves the point of aim left or right #579-000-078 6-48 Tritium Shotgun Sight, 9G28I89 . . . $ 33.99 #638-000-001 Comp Sight, 8C28I04 ...... $ 32.99 Removable rear is windage and el- 1 1 by 2 /2 MOA in /2 minute increments. Large knurled #579-000-079 6-48 OS Tritium Shotgun Sight, evation adjustable to increase your knob at the sight base allows fast, accurate return to 9G26E54 ...... 34.99 TOM BUSTER II SIGHT SET - Fits shot- accuracy when hunting deer or turkey. Front sights include red and Goodwin Style guns with vent ribs between 11⁄64" and center or previous setting. Choice of Short, Middle, #579-000-080 5-40 Tritium Shotgun Sight, 9G30D39 . . 37.99 green rods that easily interchange to maintain sight visibility in low and Long Range models. Goodwin Style sights of- Tang 7⁄16" wide and a removable front sight. or bright light. Two-dot rear sight includes one red, green, white, fer precise windage adjustments with 1.26" movement for high Rear has two green dots and adjusts for and black rod for a variety of color combinations. Wing shooting wind conditions. Elevation adjustment totals 3.94" for long-range windage and elevation. Front has one front sight is held securely to ventilated rib with included screws, shooting and the tilt screw on the base lets you keep the sight green and one orange, interchangeable and will not shake loose under recoil. Rear sight clamps firmly perfectly vertical, no matter the elevation or angle. Goodwin-Style VARIABLE APERTURE HADLEY-STYLE EYEPIECE - Rotating, de- rod. Sights fit a variety of shotguns and around ventilated rib with machine screws and is used in combina- structure lets you reach the rifle’s chamber with any cleaning de- tent-locking disc in the eyepiece lets you select one kit includes five installation screws. ab tion with an additional front sight that secures over the wing sight vice and inspect the barrel between shots. of eight aperture sizes to match your sight setting SPECS: Rear Sight – Steel base, black. 2½" (63mm) long, ¾" (19mm) wide, with included pin, both are easily removed. Rods remove and install 1 SPECS: Steel, blued. Elongated rear mounting hole allows installation to current lighting conditions for optimum accuracy. /8" (3.1mm) high. Front sight – 2½" (63mm) long, ¼" (6.3mm) wide, ¼" easily using light finger pressure and the included plastic pick. Re- on most rifles. Drilling and tapping of tang may be required. Distance Change settings with a flick of your thumb; no cum- high. Includes: 3-56; 3mm x .5; 3mm x .6; 5-40; 6-48. Gunsmith instal- quires removal of existing front sight and drilling and tapping. ab 5 between mounting holes 2.20"-2.29" (5.6-5.8cm). Mounting screws and bersome disassembly or loosening and tightening of lation recommended. SPECS: Fits Browning BPS and Benelli ribs /16" (7.9mm) wide, and Moss- 3 installation instructions included. the eyepiece. Soft rubber ring minimizes pain from #638-000-038 Tom Buster II Sight Set, 8C25E49 ...... $ 33.99 berg or Winchester ribs /8" (9.7mm) wide. Base - Plastic, matte black. Front accidental contact with eyepiece on recoil. Fits both Universal and Wing Base - 2¾" (7cm) long x ¼" (6.3mm) wide. Front Rifle Base - 2¼" #100-002-377 Univ. Middle Range 2" Tang Sight, 5 Soule-type Creedmoor sights. FLAME SIGHT - Replaces the front bead with (5.7cm) long x /16" (7.6mm) wide. Rear base 2¾" (7cm) x ¾" (1.9mm) wide. 4A131F99 ...... $ 164.99 3 SPECS: Steel, blued. 1.25" (3.1cm) diameter. a highly visible fiber optic rod on all shotguns Front Rod – Polymer, (1) red, (1) green, 1 /8" (3.4cm) long x .1" (2.5mm) dia. #100-002-376 Univ. Long Range 3" Tang Sight, #100-002-381 “Hadley”-Style Eyepiece, 4A00HBB . . . . . $ 73.99 with a ventilated rib. Screws are included to fit Rear Rod - Polymer, (1) red, (1) green, (1) white, (1) black, .05" (1.3mm) dia. 4A131B74 ...... 154.99 all front bead thread sizes. An easy way to up- #638-000-078 Four In One II, 8C25A49 ...... $ 29.99 #100-002-378 “Soule” Short Range 2" Tang Sight, FOLDING FRONT SIGHT - Serves as a globe sight grade to a bright front sight for hunting, target 4A186Q99 ...... 219.99 for long-range shooting when raised, or you can shooting, or tactical use. ab MAGNI-COMP SIGHT - Innovative tun- #100-002-379 “Soule” Middle Range 3" Tang Sight, fold it down and use the built-in blade for close SPECS: Base – steel black oxide finish. Approximate- nel sight with highly visible red or green 7 4A190N39 ...... 223.99 work. Ball/detent mechanism positively locks ly /8" (2.2cm) long. Fluorescent green LitePipe. Re- rod provides exceptional sight contrast sight in folded or extended position. Fits rifles places front sight bead on all vent ribbed shotguns. in all light conditions. Front sight dot is #100-002-380 “Soule” Long Range 4" Tang Sight, 3 with /8", 60° dovetails. #638-000-040 Flame Sight, Green, 8C12A74 ...... $ 14.99 only visible when using correct head 4A214F19 ...... 251.99 3 SPECS: Steel, blued, and natural-finish brass. Fits /8" alignment, forcing proper shooting #100-010-691 Goodwin Style Tang, 4A192A09 ...... 225.99 (9.5mm), 60° dovetail. FLASHPOINT & TRICOMP SIGHTS - form and increasing accuracy. Red or #100-002-383 Folding Front Sight, 4A60P34 ...... $ 70.99 Each versatile unit includes triangular green fiber optic rods are easily inter- SPIRIT LEVEL TUNNEL FRONT SIGHT W/INSERTS - Windage- and round, full-dot sighting tubes you changed allowing you to change sight color when light conditions adjustable, tunnel front TUNNEL FRONT SIGHT W/INSERTS - Tunnel front sight comes can snap in and out, depending upon change. Designed to fit ventilated ribs with removable front beads. sight comes with 12 inter- with 12 inserts letting you your situation. Mount to virtually any Contains a compact, stainless steel base that is secured firmly to changeable inserts so you choose the best sight pic- ventilated-rib shotgun. TriComp unit has the ventilated rib using included screw, making it ideal for heavy can choose the sight picture ture for your shooting con- a steel base and includes 9, 1¼" tubes. recoil loads or ported barrels. Sight base uses a locking spring to that’s best for the distance ditions. Works great with Flashpoint unit has a steel base and in- keep the light rod secure, yet allows easy interchangability of the and range of your target. The Creedmoor rear sights. Steel cludes 8, 2" tubes, varying in color, size red or green rod in the field with provided key. Includes five differ- spirit level helps you hold the construction for long life and shape. ent size sight screws for a variety of ribs. ab rifle completely upright to eliminate inaccuracies caused by tilting and matte finish cuts glare. SPECS: TriComp: Base - Steel, black-oxide finish. Approximately 1¾" SPECS: Base - 1704 stainless steel, matte black finish, 1¼" (3.1cm) long. 11 to the left or right. Perfect companion for the Creedmoor Rear Inserts lock into plce with (45mm) long. Includes (9) tubes. (3) round, .090" (2.3mm) O.D.; (3) round, Rods – polymer, (1) red, (1) green, /16" (17.8mm) long x .07" (1.8mm) dia. Sights. knurled, threaded cap. .125" (3.2mm) O.D.; red, green, white. (3) triangular, .140" (3.6mm) high; Includes five screw sizes: 3-56" fits Winchester, Beretta, Benelli, and Ruger 13 11 5 SPECS: Steel, blued. 1" (2.8cm) OAL, 1 /32" (3.6cm) maximum width at SPECS: Steel, matte blue finish. Sight – /5" (3cm) OAL. /8" (1.5cm) wide. red, green, white. Flashpoint: Base - Steel, black-oxide finish. Approxi- shotguns; M3 x .5" fits Browning BPS, Gold and Citori Field guns; M3 x 3 3 adjustment knobs. Fits /8" (9.5mm), 60° dovetail. Instructions included. Fits /8" 60° dovetail. mately 2½" (64mm) long. Includes (8) tubes. (2) round, .1" (2.5mm) O.D.; .6" fits Browning Citori Hunter; 5-40" fits Mossberg shotguns; 6-48" fits Ithaca, Remington, and SKB field models. #100-002-382 Spirit Level Tunnel Sight w/Inserts, #100-010-696 Tunnel Front Sight W/Inserts, red, green. (2) triangular, .14" (3.6mm) high; (2) triangular, .18" (4.6mm) 4A127Q49 ...... $ 149.99 4A41J64 ...... $ 48.99 high; (2) triangular, .20" (5mm) high; red, green. #638-000-072 Magni-Comp, 8C29N74 ...... $ 34.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 323

73 Sig20 p313-328.indd 323 11/18/2020 11:01:40 AM SHOTGUN SIGHT KITS

SHOTGUN SIGHT KIT “A” TWO KITS THAT COMPLEMENT EACH OTHER, A TOTAL OF 160 PRECISION, ECONOMICAL, GOOD- SHOTGUN SIGHT KIT “B” LOOKING, REPLACEMENT SHOTGUN BEADS

SHOTGUN SIGHT KIT "A" CONTAINS: SHOTGUN SIGHT KIT "B" CONTAINS: No. Head Dia. Thread Shaft Drill & Tap Sizes Color No. Head Dia. Thread Shaft Drill & Tap Sizes Color 1 .067 3 - 56 No. 45 - 3-56 G 21 .067 6 - 48 No. 31 - 6-48 G 2 .130 3 - 56 No. 45 - 3-56 G 22 .130 6 - 48 No. 31 - 6-48 G 3 .175 3 - 56 No. 45 - 3-56 G 23 .130 8 - 40 No. 28 - 8-40 G 4 .175 6 - 48 No. 31 - 6-48 G 24 .175 8 - 40 No. 28 - 8-40 G 5 .067 3 - 56 No. 45 - 3-56 W 25 .067 6 - 48 No. 31 - 6-48 W

RIFLE/SHOTGUN SIGHTS RIFLE/SHOTGUN 6 .130 3 - 56 No. 45 - 3-56 W 26 .130 6 - 48 No. 31 - 6-48 W 7 .175 3 - 56 No. 45 - 3-56 W 27 .130 8 - 40 No. 28 - 8-40 W 8 .175 6 - 48 No. 31 - 6-48 W 28 .175 8 - 40 No. 28 - 8-40 W

Brownells Shotgun Sight Kit “A” is a practical, economical assortment of top-quality, replacement shotgun sights. The workmanship Brownells Shotgun Sight Kit “B” is truly the natural and logical companion to the original Kit “A” - giving you all the sights that Kit “A” is superb, being done on the most modern and up-to-date machinery in the U.S.A. The sight globes are true spheres - not lop-sided as doesn’t contain, but that you need to have for a really versatile and complete replacement shotgun sight inventory. Plus, in Kit “B,” we took the those found on many other sights at a higher price. The threads are cut onto the shank, and are clean, sharp and well-machined for the practical step of making the White beads out of stainless steel. Stainless is stronger, won’t crush or distort when the beads are installed, does best possible fit. Shanks are threaded right up to the base of the bead so you can set the sight exactly onto the barrel. not have to be removed when the gun goes into the hot bluing solution (and won’t dissolve and ruin your bluing bath once it’s in there)!! Plus, Your choice of sights in the Kit is extremely wide. There are 2 shank sizes, 3 bead sizes and 2 bead colors, giving you a total of 8 dif- the stainless won’t break off at the top of the shank, stays shiny forever, stands up to tougher use in the field, and generally a lot better sight. ferent sights to choose from so you can fit nearly any gun that comes into the shop. But, the real advantage of Kit “B” is that by combining it with Kit “A”, you can now have a selection of shank sizes unequaled among The two shank sizes are 3-56 and 6-48. Size 3-56 is one of the most widely used shanks in the industry and will fit most guns having shotgun sights. So, if you get a gun in your shop with a badly misshapen, worn or stripped-out sight hole, you will have a bead of exactly threaded sight holes. The 6-48 shaft was chosen for the alternate size to be used when the original hole must be redrilled and tapped - or the same size, but with a shank one size larger. Replacement is then just a simple matter of drilling out the hole to the next size larger, where there is no hole at all - because 6-48 is the firearm industry standard screw size, and every gunshop in the country will have the drill tapping, and inserting the new bead. and tap on hand to make the new hole. The most important thing is that the Kit saves you time, giving faster work turnaround in the shop, which makes you more money. It Bead sizes are .067, .130 and .175, (the most popular sizes), giving your customer the choice of small, medium or large beads. In ad- also eliminates “patching-up” the original hole (which often then requires repairing the blue, too) and redrilling and tapping for the original dition, each bead size is available in Gold color - machined from finest brass; or White color - machined from high tensile aluminum alloy. size shank. And, it gets your customer back in the field sooner which makes him happy, and makes you look good! Like the original Kit “A”, Neither color will bleed at the heels, wear off with hard use, or chip and peel, as almost all enameled sights eventually do. the workmanship is superb, the sight globes are true spheres, the threads are cut onto the shank, so they are clean, sharp, and give the best possible fit. And, they are threaded right up to the base of the bead so you can set the sight exactly onto the barrel. Brownells Shotgun Sight Kit “A” comes to you very attractively displayed in a clear plastic counter case. Each individual sight number is in its own plainly identified box on a black tray. There are 10 sights of each number, giving you a total of 80 sights in the Kit - 40 Gold and Thread sizes are 6-48 and 8-40 - two of the most common and popular thread sizes in the gun industry, so everyone has the necessary 40 White - a complete inventory of top-quality shotgun sights with an absolute minimum of capital invested. drills and taps. The bead sizes are .067, .130 and .175, again the most popular sizes, and the same as those used in Kit “A”. Don’t pass up the opportunity to cash-in on the shotgun sight replacement market. For an unbelievably low investment you can The Gold beads are machined from finest brass; the White beads from tough stainless steel. Because these are solid metal beads, they have a complete, correctly balanced and assorted inventory of 80 superb shotgun sights, each carrying Brownells guarantee of perfect cannot bleed, chip, peel or have the color wear off. workmanship and materials. Don’t let yourself get caught short when you can have them on hand so easily. Order your Brownells Shotgun As the companion to Kit “A”, Kit “B” also comes in a clear plastic counter case. Each individual sight number is in its own clearly identi- Sight Kit “A” today! ab fied box on a black tray. There are 10 sights of each number, giving you a total of 80 new sights. By itself, a complete inven- tory of 3 1 SPECS: Brass and Aluminum Beads in 3 /2" (8.9cm) x 7" (17.8cm) clear plastic box. very popular sizes in 2 colors, with 6-48 and 8-40 shanks; but as a companion to Kit “A”, an unbeatable assortment of the most versatile #080-532-000 Shotgun Sight Kit “A”, total of 80 sights in Counter Case, 8K52K49 ...... $ 69.99 and useful shotgun sight beads available anywhere. And, right at your fingertips, ready to install for your customers. Order your Brownells Shotgun Sight Kit “B” today. ab 1 SINGLE PAK REFILL SIGHTS FOR KIT “A” SPECS: Brass and Stainless Steel Beads in 3 /2" (8.9cm) x 7" (17.9cm) clear plastic box. #080-532-100 Brass/SS Shotgun Sight Kit “B”, total of 80 sights in Counter Case, 8K55A99 ...... $ 69.99 STOCK # NO. STOCK # NO. STOCK # NO. STOCK # NO. #080-532-129 1 #080-532-131 3 #080-532-133 5 #080-532-135 7 SINGLE PAK REFILL SIGHTS FOR KIT “B” #080-532-130 2 #080-532-132 4 #080-532-134 6 #080-532-136 8 STOCK # NO. STOCK # NO. STOCK # NO. STOCK # NO. — Advise # — Single Pak Shotgun Sight Refills, 8K2G99 ...... $ 3.99 #080-532-137 21 #080-532-139 23 #080-532-141 25 #080-532-143 27 — Advise # — 10 Pak Shotgun Sight Refills, 8K18A74 ...... 24.99 #080-532-138 22 #080-532-140 24 #080-532-142 26 #080-532-144 28 — Advise # — Single Pak Shotgun Sight Refills, 8K2J99 ...... $ 3.99 10 PAK REFILL SIGHTS FOR KIT “A” 10 PAK REFILL SIGHTS FOR KIT “B” STOCK # NO. STOCK # NO. STOCK # NO. STOCK # NO. STOCK # NO. STOCK # NO. STOCK # NO. STOCK # NO. #080-532-001 1 #080-532-003 3 #080-532-005 5 #080-532-007 7 #080-532-121 21 #080-532-123 23 #080-532-125 25 #080-532-127 27 #080-532-002 2 #080-532-004 4 #080-532-006 6 #080-532-008 8 #080-532-122 22 #080-532-124 24 #080-532-126 26 #080-532-128 28 — Advise # — 10 Pak Shotgun Sight Refills, 8K18A74 ...... $ 24.99 — Advise # — 10 Pak Shotgun Sight Refills, 8K18M74 ...... $ 24.99

LYMAN SHOTGUN SIGHT N.E.C.G. SHOTGUN SIGHT BEAD SHOTGUN SIGHT THREADS Mammoth Tusk For Look Of A Traditional Ivory Bead .146" 48 TAP This meticulously crafted front bead is made from IVORY FRONT FRONT REAR These sizes are correct to the best of our knowledge, genuine Mammoth ivory to give a fine shotgun the look A special three-flute tap for the oversized Poly-Choke Extra No. 10 No. 10D No.11 however, sizes may vary with year, country of manufacture, of traditional elephant ivory, without violating interna- 5 1 Long Shank ( /16") and Bev-L-Blok sights. Use .125" ( /8") drill with (Use #29 Drill) (6-48 thread) (Use #47 Drill) etc. Browning, 3mm-5 (Metal bead), 3-56 (Ivory bead); tional trade restrictions. Practical, too, because it gives this tap. ab a clean, easy-to-see, glare-free, white dot in all light #539-101-010 No. 10 Front Sight, each, 5K6M99 ...... $ 7.99 Franchi, M3.0x0.50; Ithaca, 6-48; Marlin, 3-56; Mossberg, ® conditions. #080-598-146 .146"- 48 Taper Tap, 8K24B92 ...... $ 29.99 #539-111-028 No. 11 Rear Sight, each, 5K6J99 ...... 7.99 5-40; Remington, 6-48; Ruger , 3-56; Smith & Wesson, SPECS: Turned Mammoth ivory, natural finish. .157" (4mm) #539-101-012 No. 10D Front, Screw-in,w/wrench, M2.5x0.45; Weatherby, 3-56; Winchester, 3-56. dia. bead. Undersized 6-48 thread; secure with epoxy adhesive. 5K6G99 ...... 7.99 #661-104-004 4mm Sight Bead, 1F12D79 ...... $ 15.99

GUARANTEED. FOREVER.®

PAGE 324 SINCE 1939 Office/Tech: 641-623-5401

73 Sig20 p313-328.indd 324 11/18/2020 11:02:02 AM REMINGTON VERSAMAX TRUGLO

SHOTGUN SIGHT BEAD KIT “C” WITH SHOULDERS RIFLE/SHOTGUN SIGHTS Shouldered Beads Install To The Right Height Every Time; Popular Sizes In Brass & Stainless Steel COMPETITION MASTER FRONT SIGHT GLO DOT XTREME SHOTGUN SIGHT Fiber Optic Sight For High-Visibility Glowing Dot Makes Higher Visibility the Most of Ambient Light SHOTGUN SIGHT KIT "C" CONTAINS: Light-gathering fiber-optic No. Head Dia. Thread Shaft Drill & Tap Sizes Color Highly-visible, fiber optic sight provides a bright, yellow-green rod presents a bright, glowing 10 .130 3 - 56 No. 45 - 3-56 G aiming point for faster sight ac- aiming dot for better visibility in 11 .130 6 - 48 No. 31 - 6-48 G quisition to help you get on target both bright and low light hunting 12 .175 3 -56 No. 45 - 3-56 G quickly. Sight installs with a single conditions. Comes with four dif- 13 .175 6 - 48 No. 31 - 6-48 G screw and can be added to the gun ferent magnetic bases with different internal mounting dimensions in minutes. Optional HiViz Acces- that fit a variety of ventilated ribs. Polymer base snaps onto the rib 14 .067 3 - 56 No. 45 - 3-56 W and is held firmly in place with a high-strength magnet for quick 15 .130 3 - 56 No. 45 - 3-56 W sory Kit has a red light pipe and a white, non-fiber optic white insert installation without screws. (May also be installed by drilling and tap- 16 .175 6 - 48 No.31 - 6-48 W along with the necessary installa- ping rib, screws not included.) Does not require front bead removal. 17 .175 3 - 56 No. 45 - 3-56 W tion tool to adapt the sight to the Includes one red, green, yellow, and amber fiber optic rod. Rods shooter’s needs. ab are easily interchanged using thumb and finger pressure. Notch in 15 1 base uses factory bead to locate sight correctly along bore axis. Brownells Shotgun Sight Kit “C” is a must have for any gunsmith or sporting goods store looking to save valuable time and really please SPECS: Sight - Steel, black oxide finish. /16" (2.4 cm) length, /4" (6.4 cm) 5 Two sets of magnets allow mounting sights on two shotguns with their customers. We have taken everything that’s great about our Shotgun Sight Kits “A” and “B” - like their unparalleled selection of high width, /32" (4 cm) height. HiViz Accessory Kit includes 1 red light pipe, 1 different width ventilated ribs. Includes pocket sized, steel case for quality and size- popular sight beads- and added a special feature to make the beads in Kit “C” fast, easy, and convenient to install. . . every- solid white insert, and installation tool. 1 convenient storage. Universal fit for all shotguns equipped with /4" time. Every sight bead in Shotgun Sight Kit “C” has the advantage of skirted shoulders. What this means to you, the professional gunsmith or #767-000-952 Comp Master Front Sight, 7F17A84 . . . . . $ 21.99 5 3 1 (6.4mm), /16" (7.9mm), /8" (9.5mm), or /2" (12.7mm) wide ventilated the sporting goods store owner, is you’ll never have to get out your mike or calipers again to ensure you’ve installed the sight to its proper #767-000-953 Versamax HiViz Accessory Kit, ribs. Includes one base of each size. height. No more guesswork either! Because when the skirted shoulder reaches the barrel, it provides a positive stop that lets you know the 1 5 7F25G49 ...... 29.99 SPECS: Universal fit for all shotguns equipped with /4" (6.4mm), /16" sight is at its optimum height. Every sight from Shotgun Sight Kit “C” installs with fool-proof ease - saving you both valuable shop time and, 3 1 (7.9mm), /8" (9.5mm), or /2" (12.7mm) wide ventilated ribs. Bases - Plastic, even more important, the nightmare of upsetting a valuable customer. Not only will customers be pleased with the installation you do, black. (1) .260" (6.5mm), (1).330" (8.4mm), (1) .420" (10.7mm), (1) .520" they’ll also love the huge selection of sizes and styles from which to choose. We selected the most popular sizes from our Shotgun Sight (13.2mm) internal dimension. 2" (5.1cm) long. Rods - Polymer, (1) red, (1) Kits “A” and “B”, because we know that’s what your customers will come in and ask you for. Plus, we know how important it is to offer dif- 13 green, (1) yellow, (1) amber. 1 /16" (2cm) long x .060" (1.5mm) dia. Includes ferent styles to please as many shooters as possible. That’s why Kit “C” offers each size bead in both Gold and White. It provides the perfect TRUGLO SHOTGUN (2) sets of magnets & steel carry case. selection; Gold brass for a classy, traditional look many shotgun owners are partial to and White stainless steel for a sight bead so strong it even stands up to hot bluing. Thread sizes include 3-56 and 6-48 with bead diameters of .067", .130", and .175" to give your customers the STARBRITE DELUXE SIGHT #902-000-124 Glo-Dot Xtreme, 2K22B94 ...... $ 26.99 choice of small, medium and large beads. Also, for easy storage and quick identification, we’ve followed the same, convenient layout of Kits “A” and “B” to make it as simple as possible to find the sight you need. Kit “C’s” plastic counter case is divided into eight compartments Durable, Machined Aluminum & Bright Fiber to keep the beads organized and right at your fingertips. Plus, if you put this great-looking kit on your counter for your customers to see, Optic Bead it’s a great way to create more business by reminding people to replace broken or damaged sight beads. Brownells Shotgun Sight Kit “C” is Highly visible, bright red or green, aiming everything you’ve been looking for; a huge selection, superb quality, and now the convenience of skirted shoulders. Order this time-saving, SCATTERGUN TECHNOLOGIES REMINGTON point lets you concentrate on following the tar- customer pleasing kit today and enjoy the speed, precision, and ease with which each of these sights installs. ab ® 1 get and making the shot. Improves sight acquisition in all light con- SPECS: Brass and Stainless Steel Beads in 3 /2" (8.9cm) x 7" (17.9cm) clear plastic box. TRAK LOCK II GHOST ditions for fast, almost automatic alignment. Machined aluminum #080-000-080 Brass/SS Shotgun Sight Kit “C”, 8K59E49 ...... $ 69.99 body provides years of rugged service. ab RING SIGHT SET SPECS: Body: aluminum, black, anodized finish. Bead: .250" (6.35mm) 3 SINGLE PAK SHOULDER BEAD FOR KIT “C” long, .05" (1.3mm) dia. Shank length: /32" (2.4mm). Thread sizes 3-56 tpi, Tritium Provides Excellent Sight 5-40 tpi, 6-48 tpi. Acquisition, Day Or Night STOCK # NO. STOCK # NO. STOCK # NO. STOCK # NO. STOCK # THREAD SIZE COLOR PRICE #080-001-001 10 #080-001-003 12 #080-001-005 14 #080-001-007 16 Self-illuminating, Tritium dot front sight combined with a large #902-000-048 3-56 Red 2K8F79 $ 10.99 light gathering rear ghost ring provides extremely fast sight acquisi- #080-001-002 11 #080-001-004 13 #080-001-006 15 #080-001-008 17 #902-000-049 3-56 Green 2K8D79 $ 10.99 tion during day or low light conditions. Rear ghost ring is available — Advise # — Single Pak Shouldered Bead, each, 8K3D74 ...... $ 4.99 #902-000-050 5-40 Red 2K8D49 $ 9.99 with or without tritium. Trak-Lock rear sight features a single set- screw for windage and elevation adjustments. Rugged, low-profile 2K7B64 10 PAK SHOULDER BEADS FOR KIT “C” #902-000-052 6-48 Red $ 8.99 steel body has black parkerized finish for durability. TF12 contains #902-000-053 6-48 Green 2K8L79 $ 10.99 tritium dot front sight with standard rear ghost ring. TFR12 includes STOCK # NO. STOCK # NO. STOCK # NO. STOCK # NO. tritium dot front sight with tritium two dot rear ghost ring for precise #080-000-117 10 #080-000-119 12 #080-000-121 14 #080-000-123 16 alignment while aiming. Both models available for 12 and 20 gauge. #080-000-118 11 #080-000-120 13 #080-000-122 15 #080-000-124 17 TF12FO contains Tritium front sight only. Fits 12 gauge. ab — Advise # — 10-Pak Shoulder Bead Refills, 8K22N49 ...... $ 29.99 SPECS: Steel, black parkerized. Fits plain barrel Rem. 870, 1100, 11-87, TRUGLO TRU-POINT XTREME SPT-12. Adapts to fit other guns. Requires drilling and tapping of receiver; front sight epoxies over factory front. Includes rear mounting screws. SHOTGUN SIGHT SET TF12 - Tritium front sight with standard rear ghost ring. Fits 12 gauge. TFR12 - Tritium front sight with tritium rear ghost ring. Fits 12 gauge. Fast & Accurate Sighting TF12FO - Tritium front sight only. Fits 12 gauge. Highly visible, fiber optic sight Magnum Pro #800-110-000 TF12 Tritium Front w/Standard Rear, 12 MARBLE brings your eye quickly to the sight gauge, 8Z111F34 ...... $ 130.99 #223 MID RIB SHOTGUN BEAD in all light conditions. Improves ac- #800-000-007 TFR12 Tritium Front/Rear, 12 gauge, CARLSON’S curacy for slug and turkey guns. 8Z127N49 ...... 149.99 Contrasting red front and green rear Installs Easily, Ensures Perfect Sight Alignment Tru-Point Xtreme #800-000-009 TF12F0 Tritium Front Sight, only, HIGH VISIBILITY SHOTGUN BEAD fiber optic rods are easy to locate 8Z60J34 ...... 70.99 Tapered, ivory-color, mid-rib bead helps prevent in low-light. All steel front and rear Easy-To-See White Or Fluorescent Red can-ting the gun or aiming over the top of the front sights clamp solidly to rib. Maintains sight settings, prevents shifting bead. Stake-on design installs easily at center of barrel under recoil. Adjustable for windage and elevation. Magnum Pro Provides an easy-to-pick-up front bead or 12" to 16" from muzzle. Drill a #45 hole, follow with Gobble Dot features a conventional rifle-style rear sight with square in all types of hunting conditions. On dark or #226 Bead Sight Reamer, and press-fit in place. ab notch that works well in most light conditions. Models available for 7 1 5 3 long x .060" (1.5mm) dia. Rear Sight - 1 /16" (3.6cm) long. Ghost Ring - /4" cloudy days the white bead is fast and easy to see. On bright, sunny SPECS: Ivory-colored, .080" (2mm) diameter. /16" (7.9mm), /8" (9.5mm), 6mm, and 8mm wide ventilated ribs. Tru- 1 5 3 days the fluorescent red bead remains visible in even the brightest #579-223-000 #223 Ivory Mid-Rib Sight, 9G5A24 ...... $ 6.99 Point Xtreme features a rear sight that includes a square notch sight (6.4mm) I.D. Rods - Green, .029" (.7mm) dia. Fits /4" (6.4 mm), /16", or /8" light. blade and an easily interchangeable ghost ring. Fits all shotguns wide ventilated ribs. #226 BEAD SIGHT REAMER - 1 5 3 SPECS: Plastic bead, steel base, blued. 3-56 or 6-48 thread. equipped with /4", /16", or /8" wide ventilated ribs. ab #902-000-002 .250" Magnum Pro Sight, 2K47H69 . . . . . $ 52.99 Tapers and de-burrs after drilling #155-400-003 3-56 White High Vis. Bead, 5E5D59 ...... $ 6.99 SPECS: Magnum Pro Gobble Dot - Steel, black. Front Sight - 1.4" (3.5cm) #902-000-003 .375" Magnum Pro Sight, 2K45K89 . . . . . 53.99 hole for Marble #223 Mid-Rib 15 #155-400-004 3-56 Red High Vis. Bead, 5E6F74 ...... 8.99 long. Rod - Polymer, red, /16" (23.6mm) long x .029" (.7mm) dia. Rear Sight #902-000-004 6mm Magnum Pro Sight, 2K45A89 . . . . . 53.99 Shotgun Bead. 5 3 - 1.4" long. Rod - Green, .035" (.89mm) dia. Fits /16" (7.9mm), /8" (9.5mm), 1 #155-400-001 6-48 White High Vis. Bead, 5E5C59 ...... 6.99 SPECS: Steel. 1" (25mm) long, /8" (3.2mm) diameter. 6mm, and 8mm wide ventilated ribs. Tru-Point Xtreme - Aluminum, an- #902-000-028 Benelli Magnum Pro Sight, 2K45C89 . . . 53.99 5 #155-400-002 6-48 Red High Vis. Bead, 5E6J74 ...... 8.99 #579-226-000 #226 Bead Sight Reamer, 9G8C17 ...... $ 9.99 odized, matte black. Front Sight - 1 /16" (3.3cm) long. Rod - Red, 1" (2.5cm) #902-000-119 Tru-Point Xtreme Sight, 2K36E54 ...... 42.99

order on the web

Orders: 800-741-0015 brownells.com PAGE 325

73 Sig20 p313-328.indd 325 11/18/2020 11:03:24 AM VANG COMP SYSTEMS WILLIAMS XS SIGHT SYSTEMS MOSSBERG 500/590/930 XS SIGHT SYSTEMS REMINGTON SHOTGUN REM 870/1100/11 87 SHOTGUN SHORTY RAMP SHOTRAIL TACTICAL FRONT SIGHT Gives Your Shotgun A GHOST RING SIGHTS Mounts Rifle Sights On Speeds Sight Acquisition Plain Barrel Shotguns Rifle-Style Sight Picture Extremely Rugged; Easy-to-install tactical Convert your shotgun to a tactical workhorse. Provides Fast Target Acquisition Steel, screw-on/sol- der-on ramps with stan- sight set has a Picatinny-rail Banded front sight features green Tritium dot sur- 3 section with ghost ring rear rounded by a white ring. Supplied shims ensure dard /8" dovetail and a checkered rear surface to cut glare. .4375" Heavy duty Picatinny rail with in- barrel band clamps snugly around muzzle. Con- tegral ghost ring sight naturally cen- radius designed for 12 gauge barrels with .875" outside diameter. ab sight and banded front sight. Picatinny rail is pre-drilled for factory 3 optic mount holes. Ghost ring is adjustable for windage and eleva- toured rear sight requires drilling and tapping; ters for fast target acquisition during SPECS: Steel, blued, matte finish. 1 /4" (4.4cm) long x .612" (15.5mm) wide. 3 includes two interchangeable aperture sizes. ab 16 tion. Banded front sight post has a Tritium dot for visibility in all light tactical ops. Front sight features a blade with Height - / " (4.7mm). Accepts narrow ramp sight blades. 3 conditions. Fits barrels less than 8.860" in diameter that do not have SPECS: Steel, black, matte finish. Tritium dot with white ring, /4" (19mm) white dot and solid steel side guards for maxi- 3 #962-011-187 Shorty Ramp, /16", 2F22G94 ...... $ 26.99 a front sight rib or base. ab high from top of barrel.Fits Rem 870, 1100, 11-87 shotguns with .860-.885" mum protection. Aperature is fully adjustable (21.8-22.5mm) muzzle diameters. for windage and elevation using clearly marked adjustment screws SPECS: Picatinny Rail – Aluminum, anodized, black. Front/Rear Sights - that hold under heavy recoil. Front sight is adjustable for elevation Stress-proof steel, black oxide finish. Fits barrels with .840" to .860" O.D. #006-000-118 Banded Front Sight, only, 6K80G99 . . .$ 89.99 RIFLE/SHOTGUN SIGHTS RIFLE/SHOTGUN with included tool. Rail allows mounting or scopes and red dot #006-000-185 Mossberg 500/590/930 ShotRail, sights. Designed for non-ribbed barrels. ab 6K171C89 ...... $ 190.99 SPECS: Fits Remington 870/1100/11-87 shotguns with non-ribbed bar- WILLIAMS rels. Front sight requires soldering with Silvaloy 355 (not included). Ghost ring/rail requires drilling and tapping receiver for 8-40 tpi screws. Includes UNIVERSAL “SLUGGER” FIRE SIGHT mounting hardware and instructions. Front Sight - Steel, in-the-white, .110" (2.8mm) diameter white dot. Ghost Ring/Rail - One-piece, hard Quickly Turns Rib-Equipped 3 anodized aluminum sight body and rail. 2.2 oz.(62.4g) weight. Rail - 2 /4" Shotguns Into Slug Guns XS SIGHT SYSTEMS SHOTGUN (7cm) long x .830" (21mm) wide. Aperature - Steel, black. .23" (5.8mm) I.D. .5" (mm) high from top of receiver to center of aperature. Give your favorite shotgun a TACTICAL GHOST RING #100-003-640 Rem. 870/1100/11-87 Ghost Ring Front more accurate, rifle-style sight SIGHT SET Sights, 6K82D44 ...... $ 96.99 picture in only minutes. Clamps to vent-rib; fast to install and fast to remove. Adjusts for windage and #100-004-335 Rear Ghost Ring Sight w/Rail, elevation. Front sight provides a red dot that glows in all ambient light For Tactical & Hunting Use 6K173N69 ...... 192.99 conditions. The more light, the brighter it glows; won’t “wash out”, even Includes green tritium front sight and in direct sunlight. U-Notch rear blade is equipped with a bright green two, interchangeable, fully adjustable, rod on either side of the notch for precise, low-light sight alignment. ab rear ghost ring apertures to accommodate long- and short-range SPECS: Machined aluminum, black, anodized, matte. Universal fit for all shooting. Steel wings give added rear sight protection. Dovetailed 1 5 3 shotguns equipped with /4" (6.3mm), /16" (7.9mm) and /8" (9.5mm) wide, front sight fits factory sight ramp with minor fitting. ab 3 vent ribs. Rear - “U” notch fiber optic. Front - Fluorescent red front bead SPECS: Steel, blue, matte finish. Tritium dot/white ring front sight, /8" (10mm) 1 3 TRIJICON SHOTGUN on sheared-style blade. Includes wrench and instructions. high. Rear Sight – base, 1 /2" (38mm) long, /4" (19mm) wide, 1" (25mm) 3 7 #962-000-014 Universal Slugger Fire Sight, 2F29K74 . . . $ 34.99 long. Small Aperture I.D. - /16" (4.8mm); Large Aperture I.D. - /32" (5.6mm). ADJUSTABLE NIGHT SIGHT Rear sight requires drilling and tapping, front sight requires sight ramp. SHOTGUN FIRE SIGHTS - Models for Low Light, Tactical Sight System Remington 870/1100 (pre-2003) and STOCK # FITS PRICE Winchester 1300 guns equipped with #006-000-108 Rem. 870/1100/11-87 6K142G19 $ 157.99 Rugged, steel rear sight has slug or turkey barrels and factory sight quick-to-use, single screw adjust- #006-000-109 Mossberg 500/590, Ithaca 37 6K142M19 $ 157.99 bases. Front sight provides a glowing red dot that’s easily seen in ment for windage and elevation that — Advise # — Tactical Sight Set, 6K142G19 ...... $ 157.99 all ambient light conditions. Fully adjustable, U-notch rear has two won’t work loose with recoil. Ghost ring aperture has two tritium glowing green dots for precise sight alignment. ab inserts for fast sight pickup. Steel, post front sight has single, glow- SPECS: Machined aluminum, black, anodized. Rear - “U” notch fiber op- ing tritium dot that puts you on target fast in daylight or darkness. tic. Front - Fluorescent red front bead on sheared-style blade. Includes Glass lamps, sealed in aluminum cylinders with polished sapphire 3 instructions. Remington fits Remington shotguns with /8" dovetail front windows for a crisp outline of light. ab sight ramp. SPECS: Steel, matte finish, black. Fits plain barrel Rem. 870, 1100 and XS SIGHT SYSTEMS SHOTGUN 11-87. Can be adapted to other models. Requires drilling and tapping #962-565-300 Remington Fire Sights, 2F24A64...... $ 28.99 receiver. Front sight epoxies over factory sight. Includes epoxy. #962-000-002 Winchester Fire Sights, 2F27G19 ...... 31.99 BIG DOT TRITIUM FRONT SIGHT #892-004-004 Shotgun Adjustable Night Sights, Installs Easily Over The 2H00CTC ...... $ 99.99 REMINGTON GHOST RING FIRE SIGHTS - Bright, high contrast fiber optic sights with Existing Bead Sight large aperture, rear ghost ring provide fast, High-visibility Tritium dot accurate sight alignment in all light condi- front sight surrounded by a tions. The more light, the brighter the beads large white ring helps improve target focus and low light sight ac- glow. Front sight has a single red insert, rear quisition and sight recovery after muzzle flash. Installs over existing ghost ring has two green inserts to form an front sight beads from .125" - .140" diameter by filling the cavity on WILSON COMBAT REMINGTON easy-to-align, 3-dot sight picture. Fits Rem- 3 the underside of the sight with Brownells Acraglas Gel, then press- ington shotguns with /8" dovetail front sight ramp. ab 870/1100/11 87 3 ing the sight over the bead and allowing it to fully cure. If existing SPECS: Steel front /8" dovetail sight. Aluminum rear sight. Black, matte 1 bead is too small or too large, replace with Brownells #6 bead for SCATTERGUN TRAK LOCK finish. Fiber optic insert. Bead - /16" (1.6mm) dia. Ghost Ring - .15" (3.8mm) 3-56 threads or #26 for 6-48 threads. Some shotgun barrels may dia. aperature. require drilling and tapping of existing hole to 6-48 for installation of GHOST RING SIGHTS #962-000-083 2003 & Earlier Ghost Ring Fire Sights, #26 Brownells bead. Remington Pedestal model with stepped bot- 2F31N44 ...... $ 36.99 tom fits Remington shotgun barrels with front sight pedestal. Vent Fiber Optic Front Sight Lines Up With Rib model with flat bottom fits shotgun barrels with ventilated ribs. the Rear Ghost Ring Quickly for FAST, Plain Barrel model with cupped bottom fits round shotgun barrels. Accurate Shooting Includes instructions. ab SPECS: Machined steel, black, matte finish. Big Dot .161" (4mm) diameter. In use with law enforcement agencies all over the world, this Fits beads from .125" (3.2mm) to .140" (3.5mm). Remington Pedestal fits classic ghost-ring sight gives you fast sight acquisition and better #100-040-578 Trak-Lock II Ghost Ring Sight Set w/Red Remington front sight pedestals. Vent Rib fits ventilated ribs. Plain Barrel accuracy potential from your tactical scattergun. This rugged sight FO Front, 8Z94G99 ...... $ 99.99 fits round barrels. Includes instructions. set is fully CNC machined from bar stock steel and features an easy- #100-040-577 Trak-Lock II Ghost Ring Sight Set w/ #006-000-158 Remington Pedestal Big Dot Tritiuim, to-see fiber optic insert in the front sight. Both elevation and wind- Green FO Front, 8Z94H99 ...... 99.99 6K57G59 ...... $ 63.99 age are quickly and easily adjusted with a single hex head screw. #006-000-159 Vent Rib Big Dot Tritium, 6K57N59 . . . 63.99 Easy to install, complete instructions included. Fits most 12 gauge #965-000-359 Trak-Lock II Ghost Ring Sight Set, Remington 870, 1100, and 11-87 models. ab w/735" Tritium Front, 5F107N29 ...... 114.95 #006-000-160 Plain Barrel Big Dot Tritium, 6K57Q59 63.99

GUARANTEED. FOREVER.®

PAGE 326 SINCE 1939 Office/Tech: 641-623-5401

73 Sig20 p313-328.indd 326 11/18/2020 11:05:05 AM