1st Edition 2018

Visit our website for Adendorff complete contact details, hints, videos & more product Prices valid 1 February 2018, thereafter machinery mart information, terms & subject to change without prior notification. conditions All Prices Include 14% VAT Buyers Guide for Quality Tools & Machinery

GAUTENG NELSPRUIT ✆ (013) 753-3580 JOHANNESBURG ✆ (011) 434-7000 15 Old Pretoria Road, Entrance at 4 Stinkhout 152 Rosettenville Road, Springfield, Crescent, ✉ [email protected] Johannesburg, ✉ [email protected] MEADOWDALE ✆ (011) 454-1407 FREE STATE Unit No. 8, Route 24 Complex, Herman Road, BLOEMFONTEIN ✆ (051) 448-1689 Between Edenvale & Barbara Road Offramps, Oliver Tambo Road (Church Street), ✉ [email protected] Cnr. Harvey Road, Blackwood Crossing, Oranjesig, [email protected] BOKSBURG ✆ (011) 914-1550 ✉ 518 Commissioner Street, Boksburg East WELKOM ✆ (057) 355-6600 Industrial, ✉ [email protected] 137 Constantia Street Dagbreek, STRYDOM PARK ✆ (011) 793-3380 1m Geared ✉ [email protected] 2013 Malibongwe Drive, (Tiger Wheel Head Metal R54995 & Tyre Building), Randburg, Lathes see page 3 KWAZULU-NATAL ✉ [email protected] DURBAN ✆ (031) 202-4355 ROODEPOORT/KRUGERSDORP LIFETIME 192 Umbilo Road, Dalbridge, ✆ (011) 664-8336 GUARANTEE ✉ [email protected] 17 Carol Road, (Service Road to Ontdekkers), Opp. Witpoortjie Station, DURBAN NORTH ✆ (031) 263-0007 Breaunanda, ✉ [email protected] R27995 90 Intersite Avenue, Springfield Park, see page 25 ✉ [email protected] PRETORIA ✆ (012) 329-9576 300 Steve Biko Road (Voortrekkers Road), Tampering Rammer PIETERMARITZBURG Cnr. Adcock Street, Gezina, ✆ (033) 345-1996 ✉ [email protected] 300 Boom Street, ✉ [email protected] CENTURION ✆ (012) 653-0586 14 Miracle Park, Cnr. Old Johannesburg R3495 62 Piece Hexa WESTERN CAPE Road R101 & Lenchen Extension, see page 23 Tool Set Rooihuiskraal, CAPE TOWN ✆ (021) 552-7389 ✉ [email protected] 9 Montague Drive, Montague Gardens, ✉ [email protected] VEREENIGING ✆ (016) 422-6057 26 De Villiers Avenue, NORTHERN CAPE ✉ [email protected] KIMBERLEY ✆ (053) 831-1882 NORTH WEST 12 Fabricia Road, Fabricia R4495 ✉ [email protected] RUSTENBURG ✆ (014) 594-1545 EWK 8000U Oliver Tambo Drive R104, Cnr. Beyers see page 36 12V Winch Naude Drive, ✉ [email protected] EASTERN CAPE PORT ELIZABETH ✆ (041) 484-3995 KLERKSDORP ✆ (018) 462-1116 99 O.R. Tambo Street (Church Street), 5 Uitenhage Road, Cnr. Grahamstown Cnr. President Kruger Street, Road, North End, ✉ [email protected] ✉ [email protected] R2995 50mm see page 27 Water Pump LIMPOPO POLOKWANE ✆ (015) 292-0243 19 Iran Avenue, Nirvana R5995 [email protected] R2395 ✉ see page 29 see page 9 MPUMALANGA Model 3 000 PRO MIG 180 WITBANK ✆ (013) 690-2305 Garage Jack DC Inverter 40 Watermeyer Street, Klipfontein, Ext. 8, Welder ✉ [email protected] R7495 200l Belt Drive see page 11 Compressor 0861 ADENDO 0861 2 3 36 36 www.adendorff.co.za ENGINEERING ACCESSORIES

Verniers D.I.Y. Drill Bit Sharpener Drill Bit Sets TOP QUALITY Fully Ground High Speed R295 Steel Titanium Coated Bits Digital • Power on/off TDRILS / 013 25 Piece (shown) 150mm Caliper For Masonry & Steel Bits R745 3 - 13mm • 1 - 13mm EBITSD / 025 • Accuracy: 0.01mm R285 Metric/Imperial Switch EAVERD / 151 19 Piece • 1 - 10mm R345 200mm Caliper Tap & Split Die Sets EBITSD / 019 19 Piece COBALT • Accuracy: 0.02mm R395 R575 Metric/Imperial Switch EAVERD / 200 Steel • 1 - 10mm EBITSD / 020 300mm Caliper • Accuracy: 0.02mm R775 58 Piece Clamping Kits Metric/Imperial Switch EAVERD / 300 Standard Type M10 - T14 R845 EACLAM / 010 200mm Caliper EDIETP / 045 M12 - T14 R895 • Stainless Steel R225 R1595 EACLAM / 012 • Accuracy: 0.02mm EAVERN / 201 45 Piece Alloy Steel-Tungsten Coated (Metric) • M6 - M24 (shown) M14 - T16 R1095 300mm Caliper EACLAM / 014 • Stainless Steel R495 40 Piece (Light Duty, Metric) • Accuracy: 0.02mm EAVERN / 301 • M3 - M12 EDIETP / 040 Arbor Collet R345 “Live” Centres Dial Gauge Chuck Set 150mm 160mm Rotary Table • Stainless Steel R345 EAVERN / 155 • Accuracy: 0.01mm R5995 MT1 R295 EACENT / 002 EATABL / 160 MT2 R295 EACENT / 000 Micrometers R995 EACOLT / 016 MT3 R345 EACENT / 001 OUTSIDE INSIDE • 4 - 16mm MT3 MT4 R375 EACENT / 004 Quick Change Tool Posts MT5 R595 EACENT / 005

Lathe Chucks ENQUIRE With 4 Holders IN (standard) 3 Jaw (self centering) STORE • 100 - 200mm EAMICR / 004 R695 (shown) 4 Jaw (independant) Set of 4 • 0 - 100mm • 5 - 100mm R2495 10mm 12mm • 100 - 250mm • Accuracy: 0.01mm R2295 R2495 • 5 - 30mm R545 16mm R2495 25mm R3695 To fit these Chucks, Back Plate N.B. To fit Quick Change Tool Posts modifications are DIGITAL OUTSIDE some modifications are required required (Individually) Cutting Tool Sets 0 - 25mm R185 • 0 - 25mm Indexable 7 Piece 100 - 200mm R895 EAMICR / 025 10mm R1095 150 - 300mm R1395 R795 EACUTT / 001 Assorted DIY 12mm R1295 Dial Gauges 1 Metal Lathe EACUTT / 000 ALSO AVAILABLE Dial Test Indicator Cutter Set 16mm R1695 Large range of 1 Gauge Plunger Type R225 EACUTT / 016 EAGAUD / 001 assorted Cutting Tips • 0.01mm (shown) 5 Piece for above Sets. Magnetic Base 2 R185 8mm x 8mm R195 R365 (shown) EAMAGB / 001 2 EACUTB / 004 EABORI / 009 ENQUIRE IN STORE Magnetic Base with 10mm x 10mm 9 Piece Boring Bar Set R395 (shown) R215 Micro Adjusting Arm EAMAGB / 002 EACUTB / 005 • 12mm Round Shaft Shank Size 8 Piece Dial Test Indicator Gauge with Toggle 6mm x 6mm R295 R2095 Switch R495 EACUTB / 008 • Range: 0.8mm • Reading: 0.01mm EAGAUG / 002 EAMILS / 023 23 Piece H.S.S. End Electronic Digital Dial Indicator Gauge 13 Piece H.S.S. End Mill Set R795 R795 Mill Set • 0 - 12.7mm/0.5” • Round Shank: 4 - 16mm EAMILS / 016 EAGAUD / 002 • Round Shank: 3 - 25mm

2 E&OE www.adendorff.co.za GEAR ENGINEERING 500mm Geared Head Metal DRIVEN Screwcutting Bench Lathe 180mm Variable Speed Mini Bench Lathe R8995 • Motor: 0.4kW, 220V • Swing Over Bed: 180mm ELATHE / 181 R16995 ELATHE / 500 • Spindle Bore: 20mm • Motor: 0.55kW, 220V • Distance Between Centres: 310mm • Includes 3 Jaw Chuck (100mm) • Tail Stock Taper: MT2 • 500mm Between Centres • Spindle Speed Range: • Thread Pitches: 0.4 to 3mm (L) 200 - 1 150rpm (H) 460 - 2 500rpm • Swing Over Bed: 205mm • Auto Feed • Weight: 125kg STAND NOT 500mm Geared Head Bench Lathe INCLUDED (OPTIONAL OPTIONAL EXTRA EXTRA) • Motor: 750W, 220V • Spindle Bore: MT3 R21495 • Distance Between Centres: 500mm ELATHE / 250 Stand R2795 ELATHE / 501 • Max. Swing Over Bed: 250mm • Spindle Speeds: 12 Steps 80 - 1 600rpm 520mm Belt Driven Screwcutting Bench Lathe • Including 3 Jaw Chuck • Range of Thread: 0.25 - 2.5mm • Weight: 180kg R14995 ELATHE / 520 • Motor: 550W, 220V 550mm Multi Purpose Geared GEAR • Spindle Bore: 20mm DRIVEN • Spindle Taper: MT3 Head Bench Lathe • Swing Over Bed: 210mm with Mini Milling and Drilling Function • Distance Between Centres: 520mm • Spindle Speed: 140 - 1 800rpm • Includes 3 Jaw Chuck (100mm) STAND NOT R26995 INCLUDED ELATHE / 251 (OPTIONAL OPTIONAL EXTRA EXTRA) Lathe • Motor: 750W, 220V • Max. Swing Over Bed: 250mm Stand R2495 ELATHE / 521 • Range of Thread: 0.25 - 2.5mm • Distance Between Centres: 550mm 1m, 1.5m & 2m Geared Head Metal Lathes Milling • Motor: 350W, 220V • Max. Drilling Capacity: 13mm GEAR • Max. Milling Capacity: 16mm DRIVEN • Max. Face Milling: 30mm • Spindle Bore: MT3

Bench Lathe, Milling & Drilling Machines

with Auto Feed & (shown) Adjustable Head HQ400 HQ500 HQ800 Turning Swing Over Bed 420mm 420mm 420mm Distance Between Centres 400mm 500mm 800mm Spindle Bore 20mm 28mm 28mm Spindle Taper MT3 MT4 MT4 Drilling and Milling Drilling Capacity 15mm 22mm 22mm ALSO AVAILABLE Powerful Motors 1 0.55kW, 220V 0.55kW, 220V 0.55kW, 220V Larger models: 1.5m and 2m 2 0.55kW, 220V 0.55kW, 220V Ex Johannesburg South Warehouse R21995 R28995 R32995 SEE WEBSITE FOR DETAILED EMILHQ / 400 EMILHQ / 500 EMILHQ / 800 SPECIFICATIONS (shown) Industrial Tool 632C 636A Room D420 550mm Geared Head Bench Lathe Powerful Motor 1.5kW, 220V 1.5kW, 220V 3kW, 380V GEAR Swing Over Bed 320mm 360mm 410mm THE PROFESSIONALS CHOICE DRIVEN Swing Over Cross Slide 178mm 198mm 255mm Distance Between 1 000mm 1 000mm 1 000mm R28995 Centres ELATHE / 613 Swing in Gap 450mm 476mm 540mm • Motor: 1.1kW, 220V Spindle Bore 38mm 38mm 54mm • Distance between centres: 550mm Spindle Taper/Tail Stock MT5/3 MT5/3 MT6/4 • Auto Feed • Double V-bed Gross Weight 550kg 620kg 1 500kg • Swing Over Bed: 330mm R54995 R64995 R109500 • Includes 3 Jaw Chuck (160mm) ELATHE / 100 ELATHE / 107 ELATHE / 104 • Swing Over Carriage: 210mm Footbrake, Footbrake, STAND NOT ACCESSORIES Pedestal & OPTIONAL EXTRA Pedestal & Stand & INCLUDED INCLUDED Splash Cover (OPTIONAL Splash Cover Splash Cover Stand R3695 ELATHE / 614 EXTRA)

0861 ADENDO / 0861 23 36 36 E&OE 3 ENGINEERING ACCESSORIES 405mm Industrial Power Hacksaw

Cut-off Machines Hydraulic Band Saws 400mm Abrasive HEAVY (available 220V or 380V) R14995 R5495 DUTY ESAWPH / 716 220V ECUTHD / 220 380V ECUTHD / 383 • Motor: • 220V (2 600rpm) (shown) 0.37kW, 220V • 380V (2 800rpm) • Capacity Ø: 160 x 160mm • Angle: 100 x 10mm • Blade Stroke Length: 100 - 180mm • Solid: 40mm • Hacksaw Blade: 350 x 25 x 1.25mm • Capacity Round: 100 x 6mm Horizontal 200mm Metal Cutting Band Saw • Motor: 4kW, 380V R39950 • Angle: 100 x 10mm 380V • Motor: 1.5kW, available 220V or • Solid: 50mm ESAWHB / 917 380V • Blade Size: 25 x 0.9 x 3 035mm • Capacity Round: 220V 130 x 6mm • Cutting Capacity: 225 x 400mm ESAWHB / 916 • Blade Speeds: 25/40/51/71mpm R5995 ECUTHD / 400 Horizontal Metal or Wood Cutting Band Saw with Vice on Stand R1995 ECUTLD / 001 2000W, 220V, 355mm (shown) R4995 NEW ESAWHV / 115 Cold Cut ESAWHV / 200 180mm (shown) • Motor: 0.55kW, 220V R17995 • Blade Size: • Motor: 1.1kW, 220V 1 640 x 13 x 14TPI • Blade Size: 2 360 x 19 x 0.9mm R2395 • Suitable for Metal, Wood, • Cutting Capacity: ECUTLD / 180 Plastic and Steel Round Bar 90° - 205mm 355mm • Capacity: Square Bar 90° - 215 x 205mm Round: 110mm Round Bar 45° - 143mm R4995 Rectangular: 100 x 150mm Square Bar 45° - 143 x 115mm ECUTLD / 002 Bench Vices Cross Slide Vices Metal Belt Sander R9695 220V 2 WSANDS / 076 380V 1 WSANDS / 075 R1195 EVICES / 601 EVICES / 010 100mm 150mm R1950 • Motor: 3kW WHY DUCTILE It is more flexible and elastic due to its R795 R995 • Belt Size: 75 x 2 000mm STEEL? nodular graphite inclusions EVICEC / 101 EVICEC / 151 • Working Area: 460 x 75mm 6” 150mm Industrial Bench Ductile Iron, R1950 ALSO AVAILABLE Swivel Base, 16.5kg (shown) EVICES / 601 Sanding Belts CAST IRON Machine Tool Vices 4” 100mm Swivel Base, 6kg R445 Drill Press Vices EVICES / 404 6” 150mm Fixed Base, 15.5kg 75mm EVICDP / 001 R1195 R155 (shown) EVICES / 010 100mm R195 EVICDP / 004 6” 150mm Heavy Duty Fixed Base, R1595 28kg EVICES / 603 150mm R295 EVICDP / 006 8” 200mm Heavy Duty Fixed Base R2595 80mm R995 EVICEM / 001 with Anvil, 45kg EVICES / 803 125mm R1795 EVICEM / 125 ALSO AVAILABLE ENQUIRE IN-STORE 100mm R475 EVICDP / 002 Large Range of Bench Vices from 4" - 8" and Anvils 20, 30 & 50kg 200mm R3795 EVICEM / 200 150mm R745 EVICDP / 003 4 E&OE www.adendorff.co.za Bench Grinders TOP ENGINEERING QUALITY 1 R2595 Bench & Pedestal Drills EGRINB / 250 Motor: 0.55kW, 220V 12 Speed 16mm Chuck 16mm Pedestal 16mm Type (shown) Bench Type D.I.Y. 150mm, 220V, 2 950rpm, 0.25kW R3495 R3395 R645 EGRINB / 151 EDRILP / 002 EDRILB / 001 200mm, 220V, 2 950rpm, 0.35kW R765 EGRINB / 200 220V Magnetic Base Industrial Pedestal Drill 25mm INDUSTRIAL Drills with Coolant 12 Speed Drill Press Feature 150mm, 220V, 2 950rpm, 0.52kW R1795 EGRINB / 152 • Motor: 1.1kW, 220V • Motor: 1 200W 200mm, 380V, 2 950rpm, 0.9kW • (16mm Chuck) 1 • Capacity: 35mm (shown) R2595 EGRINB / 250 EDRILP / 003 R6795 R7795 250mm, 220V, 2 950rpm, 0.9kW R2795 EGRINB / 255 EDRILM / 001 COMBINATION • Motor: 1 850W • Capacity 75mm R1295 EDRILB / 002 Belt/Stone Grinder, 150mm, 13mm Bench Drill, D.I.Y. 220V, 2 950rpm, 0.52kW, R1795 EGRINB / 305 R17995 Belt Size: 50mm x 680mm EDRILM / 002 • Motor: 0.35kW, 220V • 5 Speed Wet & Dry Bench Grinder, 150mm, 220V, 2 950rpm, 0.52kW R1895 EGRINB / 310 Bench Type Milling Machines Grindstone/Wire Polisher, 150mm, Reversable Motor allows for (shown) 220V, 2 950rpm, 0.52kW R1895 EGRINB / 300 Milling and Tapping 40mm 32mm Drilling Capacity 40mm 32mm Bench Polisher/Buffer Grinder Face Mill Capacity 80mm 80mm End Mill Capacity 28mm 28mm Headstock Swivel ±90° ±90° R EGRINB / 075 Max. Distance Nose R1895 745 450mm 480mm EGRINB / 201 to Table Multi Grinder & Knife Spindle Taper MT3 MT3 • 200mm • 220V Sharpener Motor 1.5kW, 220V 0.75kW, 220V • 0.75kW Forward and 175mm 175mm Backward Travel Working Area MAC AFRIC 220V Mini 800 x 240mm 730 x 210mm Drilling/Milling Machine of Table R28995 R26995 EMILGH / 045 EMILGH / 032 EMILGH / 130 R12995 OPTIONAL EXTRA • Motor: 0.35W, 220V Stand Horizontal x-y Auto Feed • Max. Table Travel: 220mm • Max. Cross Slide: 100mm R1995 R5495 • Max. Spindle Travel: 180mm • Spindle Taper: MT3 • Weight: 68kg TOP SEE WEBSITE FOR DETAILED QUALITY Milling Machines SPECIFICATIONS Gear Driven Turret Radial Arm Drilling 380V (shown) Head 380V Max. Drilling Ø 50mm 50mm Machines Max. Boring Ø 120mm 152.4mm (shown) Distance Spindle 100 - 480mm 0 - 405mm 32mm 35mm to Table Surfaces Max. Drilling Ø 32mm 35mm Spindle Speeds 115 - 1 750rpm 60 - 3 600rpm Max. Travel Max. Tapping Ø M16 900mm 1 000mm Distance on arm Table Size 1 120 x 230mm 1 370 x 254mm Spindle Speeds 108 - 1 000rpm 75 - 1 220rpm Table Travel 600 x 300 x 280mm 400 x 800mm Range 1.5kW vertical 2.2kW Motor Max. Tapping Ø 18/14mm 18/24mm 2.2kW horizontal Table Size 430 x 300mm 430 x 300mm Weight 1 450kg 1 200kg Spindle Taper MT4 MT4 Motor 1 100W 2 200W R84950 R109500 EMILGH / 635 EMILGH / 632 Weight 800kg 1 100kg with waterpump, light, with waterpump, ACCESSORIES digital read out and light, digital read out R44995 R67995 INCLUDED EDRILR / 002 EDRILR / 003 auto feed and auto feed

0861 ADENDO / 0861 23 36 36 E&OE 5 METAL WORKING Sheet Metal Bending Brakes

Foot Shearer/Guillotine Box and Pan Sheet Metal Folders R27995 R26750 • Capacity: 1.5 x 1 320mm ESHEAR / 132 EBENDB / 127 * • Capacity: 2.0 x 1 270mm R4995 • Folding angle: 135° ESHEET / 001 • Max. Clamping Bar Lift: 47mm 900mm • Width: 900mm • Weight: 385kg • Capacity: • With Foot Control for Easy 1.6 x 900mm Operation • Material Dependant Available ex-Johannesburg * South warehouse

1.0 x 610mm SEE WEBSITE FOR DETAILED (shown) SPECIFICATIONS R4995 EBENDB / 160 1 200mm R8995 1.2 x 1 220mm ESHEEB / 048 Guillotine, Bender & Roller (Rated Mild Steel)

R12995 • 1.2m • Capacity: 1.2 x 1 200mm Sheet Metal Forming Roller EBENDB / 122 3-in-1 Machines Bender Guillotine/Shears Guillotine Slip Rollers

• High Strength MILD STEEL ONLY Steel Rollers R5995 • Quick Release Top Roller Width Capacity Price ESHEAR / 101 • Hardened Steel Gearing (shown) • Capacity: 1 000mm 1 000mm x 1mm R15995 Capacity Roll Price ESHEET / 100 1 000 x 1.5mm 305mm x 0.8mm 32mm • Mild Steel: 1.5mm 1 320mm 1 320mm x 1mm R24995 R2795 ESLIPR / 002 ESHEET / 132 280mm Metal Shear, Bench 900mm x 1.5mm 50mm R11495 ESLIPR / 001 1 320mm 1 320mm x 1.5mm R32995 Type • 1mm Capacity ESHEET / 133 1 300mm x 1.5mm 75mm R18895 ESLIPR / 003 R745 ESHEAR / 003 Steel Cropper for Round, Angle and Flat Steel Metal Bending Sets Functions: Riveting, Rolling, Bending, Twisting, Scrolling and Shearing Multi Purpose Metal Craft R4495 Shearing Capacity • Flat Bar: 30 x 5mm ESHEAR / 002 R7295 • Square Bar: 6 x 6mm EBENDR / 003 • Round Bar: 6mm Punching Capacity • 4mm Diameter Screwing Capacity • Flat Bar: 30 x 5mm Rotary (Jenny) • Square Bar: 10 x 10mm Machine & Stand Curving Capacity • Flat Bar: 30 x 5mm (shown) For Decorative Metal Bending • Square Bar: 8 x 8mm Model RM08 Model RM12 • Round Bar: 10mm Capacity 0.8mm 1.2mm Throat EBENDR / 002 177mm 400mm R1675 Universal Depth R4995 Compact Bender Set Scroll EBENDR / 000 • 1”- 3” • Mild Steel • Right Angle R4895 R4395 Bending Capacity: 0 - 200mm • Capacities Round Bar Ø: 10mm EBENDR / 008 EBENDR / 012 • Suitable for Flat, Square, Flat Bar: 30 x 10mm and Solid Bar Square Bar: 10 x 10mm Tube Notcher Universal Type for hot or cold bending (various shapes) NEW Attachment for Cold Bending: • Square Steel - 16 x 16mm Pedestal Drill R2995 • Round Steel - Ø 18mm • Angle - 60 x 8mm Love your Tools EBENDR / 001 The right tool • Model PN-1/25 • Flat Steel - 70 x 6mm; 60 x 8mm; 30 x 12mm Hot Bending: • Square Steel - 30 x 30mm for the job • Spindle: ½” • Round Steel - Ø 30mm • Angle - 70 x 15mm • Tube Capacity: 2” (50mm) • Angle Capacity: 0 - 60° R995 • Flat Steel - 70 x 15mm; 60 x 20mm ETUBEN / 001 6 E&OE www.adendorff.co.za Pipe Benders with Stand METAL WORKING 16 Ton Hydraulic Horizontal • 2 Stage Jack R4695 Pipe Benders • Bending Capacity: GPIPEB / 003 ½”- 3” (12.5 - 75mm) N.B. Our range of Hydraulic Pipe Benders are designed for precision cold bending of schedule 40/80 (thick wall) pipes which makes these 18 Ton Hydraulic Horizontal ideal for a variety of pipe work installations and general engineering applications. • 2 Stage Jack R6495 (Not suitable for thin wall piping.) Ideal for manufacturing gates, etc. • Bending Capacity: ½”- 3” GPIPEB / 004 Pipe Wall Thickness minimum 4mm (12.5 - 75mm) 12 Ton (shown) • Bending Capacity: ½”- 2” R1895 (12.5, 20, 32, 40, 50mm) GPIPEB / 012 Square Tube Roller 16 Ton • Bending Capacity: ½”- 3” (12.5, 20, 32, 40, 50, 65, R2895 Complete with a Set of Rollers GPIPEB / 016 R3295 75mm) Specifications: EBENDR / 006 • Max. Capacity: Mild Steel: Min. Ø: Min. Radius: Multi Function Rolling Type Pipe 20 x 20 x 1.2mm 450mm 180mm 25 x 25 x 1.2mm 500mm 170mm Bending Machine 30 x 30 x 1.5mm 550mm 200mm 40 x 40 x 1.5mm 600mm 220mm R18995 GPIPEB / 005 Hand Pipe Bending Sets • Motor: 1.5kW, 220V • MultiIncludes: Function 9 Round Pipe Rolling Moulds: Type Pipe 16, 19, 22,Bending 63, 25, 51, Machine 32, 38, 76mm GPIPHB / 001 8 Square Pipe Moulds: 16, 19, 22, 25, R2495 30, 38, 40, 50mm • Round Pipe: 10, 12.5, 16, 19, 22mm • Bending Wall Thickness: 0.5 - 2mm • Max. Bending Angle: 180° • Pipe Wall Thickness: 1.2mm - 1.6mm OPTIONAL EXTRA (Material Dependant) • 2 Set Square Pipe Dies and Rollers: 25mm Round 19, 25mm Pipe Die R325 GPIPHB / 000 Hydraulic Exhaust-Tube Bender Ring Roller for Solid Metal Shrinker/Stretcher Combo Set *R128950 MANUALLY GPIPEB / 007 OPERATED R2995 EBENSS / 001 Ideal for • Motor: 5.5kW, 7.5hp, 380V panelbeating. • Bending Capacity: Makes it easy to add ½” - 2 ½” OD strength & rigity to your • Max. Bending Capacity: R14995 sheet metal projects. EBENDR / 004 ½”- 3” OD • Swaging Capacity: 1” - 3” • Ideal for • Hydraulic Pump Output: Flat Bar, 4 200psi TOP Round Bar & • Max. Bending Force: Square Bar ACCESSORIES Complete with Shrinking/ 27 215kg QUALITY INCLUDED Stretching Dies • Dimensions: 1 800mm x 900mm x 108mm Ring Roller Available ex-Johannesburg South warehouse Multi Function Shearing * R1295 Machine Arbor Presses EBENRR / 001 1 ton • 110 mm throat depth R46995 R895 EPRESA / 001 4 Ton Hand 220V Notcher ESHEAR / 001 2 ton • 190mm throat depth 380V R1995 EPRESA / 002 R6495 ESHEAR / 000 3 ton • 600mm throat depth ENOTCH / 000 R3495 EPRESA / 003 5 ton • 450mm throat depth • Stroke: 19mm • Max. Notching: 150 x 150mm R7995 EPRESA / 005 • Cutting Capacity: 16# 1.6mm SEE WEBSITE FOR DETAILED SPECIFICATIONS

0861 ADENDO / 0861 23 36 36 E&OE 7 WELDING Spot Welding • Rated Power: 25kVA Oxygen/Acetylene Kit R10995 • Rated Current: 60A 380V • Arm Length: 300mm GAS • Duty Cycle: 20% EWELSP / 025 • Max. Welding Thickness: EOXYAC / 001 220V 3 + 3mm R1995 EWELSP / 026 • Weight: 120kg Oxygen & Acetylene Regulators, Torch Cutting & Welding Nozzle, Goggles, Spark Lighter, Hoses, with Flashback Arrestor. N.B. This Kit fits on Large Bottles Only R13995 (Large Bottles not supplied with Kit) EWELSP / 001 Set of Oxygen/Acetylene Gauges Hand Held (HS3000) 220 Volt • Max. Spot Weld Thickness: 2 + 2mm • Max. Clamping Force: 12kg • Min. Rest Period between Welds: 20 sec. • Weight: 10.5kg R995 EOXYGA / 999 Auto Darkening Welding Helmets Plasma Cutter (DC Inverter) PLASMA EWELDH / 005 COMPRESSOR REQUIRED CUT R595 Fast Reaction Time & Fine Adjustment, Fully Automatic EWELDP / 040 • Welding & Grinding Function R3495 • Viewing Area: 98 x 45mm • Colour: Carbon Fibre Cut 40 (shown) • Switching Time: 1/25 000s • 220V • Thickness: 8mm Mild Steel, 3mm Stainless Steel EWELDH / 002 TOP R245 QUALITY Non-adjustable • View Area: 91 x 39mm • Colour: Matt Black WELDERS CHOICE Cut 60 • 380V R5995 EWELDP / 060 • Viewing Area: 98 x 43mm • Cuts Mild Steel, Stainless Steel, Aluminium, Brass & • Shade Control: Adjustable • Sensitivity Control: Adjustable Copper • Max. Cutting: 1 - 15mm Mild Steel • Colour: Black 1 - 8mm Stainless Steel • Switching Time: 1/25 000s R375 EWELDH / 006 ALSO AVAILABLE Cut 60 Welding Magnets • 220V R5795 EWELDP / 059 Large: 190mm across (shown) R70 EAMAGW / 001 Oil Bath Welders Medium: 155mm across R50 EAMAGW / 002 EXCLUDES WELDING CABLES ARC Small: 120mm across R30 EAMAGW / 003

140 Amps R1295 EWELDO / 141 (shown) MAC AFRIC MIG-MMA (Arc) 220V Inverter Welders MIG- 220 Amps R1595 EWELDO / 221 Output Duty MAG 250 Amps Model Current Cycle Price R1695 EWELDO / 251 Model 50A-200A 50% R6595 200 EWELDM / 200 MAC AFRIC 3-in-1 MIG-MMA-TIG Model 3-IN-1 50A-250A 50% R7895 MIG 250 EWELDM / 251 R13995 ACCESSORIES MIG Torch, Earth Clamp & Electrode Holder INCLUDED Model 250 EWELDM / 250 • 220V • 250A • Voltage: 28V Thermamax MIG 250 Welder • 60% Duty Cycle • Rated Input Current: 51.5A MIG EWELDM / 203 ACCESSORIES MIG, TIG Torch, Earth Clamp R13500 INCLUDED & Electrode Holder • 220V • 60% Duty Cycle @ 200A • Current Range: MIG Torch and 50-250A ACCESSORIES Earth Clamp INCLUDED

8 E&OE www.adendorff.co.za MAC AFRIC Combination DC MIG Inverter Welders WELDING (Compact) New Improved Professional Quality DC Inverter Welders with IGBT Technology & Flux Core Option (Gas/No Gas) Please note: Use minimum 2.5mm Extension Cord MMA Compact, powerful & easy to use for MIG and ARC welding. With adjustable consistant wire feed for TOP R2395 smoother, more even welds. This will suit general QUALITY EWELDS / 200 metal fabrication, which makes it ideal for the general workshop. With a flip of a switch it can change from MIG to ARC. EWELDS / 161 Duty Duty R1595 Model Voltage Amp Cycle Cycle Price Duty Model 200 60% @ 100% @ Model Voltage Cycle Price 220V 200A R8695 (shown) 200A 130A EWELDM / 202 Model 145 Mini D.I.Y. 220V 60% R1495 EWELDS / 145 30% @ 100% @ Model 250 380V 250A R12995 Model 161 D.I.Y. (shown) 220V 60% R1595 EWELDS / 161 250A 180A EWELDM / 205 Professional Model 315 380V 60% 60% @ 100% @ R6495 EWELDS / 315 Model 350 380V 350A R21995 350A 270A EWELDM / 351 Model 160 220V 60% R1950 EWELDS / 160 ALSO AVAILABLE MIG Wire 15kg/roll Model 200 (shown) 220V 60% R2395 EWELDS / 200 0.8mm R395 1.0mm R345 1.2mm R325 Professional Model 200 with 220V 60% V.R.D. R3495 EWELDS / 202 AC/DC 200A TIG Inverter Welder Model 250 380V 60% R3995 EWELDS / 250 PROFESSIONAL’S CHOICE TIG Model 250 220V 60% R3995 EWELDS / 251 ACCESSORIES Electrode Holder and Earth Clamp Argon Flow INCLUDED R12495 Meter EWELDT / 201 MIG Torch • 200A • 220V MB25 (shown) MIG • 60% @ 200A R375 (Ideal for Non EWELDT / 003 EWELMA / 025 and Ferrous R995 Metals, Mild Steel, MB15 Stainless Steel and Aluminium) R795 EWELMA / 015

MAC AFRIC MIG-MAG Welders MIG- TIG/DC 220V Inverter Welders with Mild Steel & Stainless MAG High Frequency Start Steel, Ferrous Metals Only Model TIG 160 (shown) TIG • 3.3kW • 60% Duty Cycle R3395 EWELDT / 160

Model TIG 200 MIG MMA • 4.8kW • 60% Duty Cycle R3895 EWELDT / 200

MIG DC Inverter Welders PRO-MIG 180, MIG R5995 220V • Gas/No Gas EWELDM / 180 • 30-180A • MIG/MMA-function Light Duty for the D.I.Y. Enthusiast • 220V • 10% Duty Cycle ACCESSORIES MIG Torch & Output Current: INCLUDED MIG 150 Gas/No Gas R2995 Earth Clamp 40A-140A EWELDM / 150 Output Current: OPTIONAL EXTRA MIG 195 (shown) Gas/No Gas R3495 40A-180A EWELDM / 195 MIG Spool Gun for Aluminium Welding Wire ALSO AVAILABLE (3m) including roll of 0,8mm–500g R2295 Flux Core Welding Wire aluminium welding wire EWELDM / 181

0861 ADENDO / 0861 23 36 36 E&OE 9 Suction Feed Spray Guns TOP SPRAY GUNS QUALITY

2 3 4 1

5

High Pressure 1 R245 • 4 - 7cfm • 1.8mm Nozzle ASPRAH / 001 Low Volume Low Pressure 2 Anodized Professional R625 Gravity Feed Type Spray Guns • 3 - 3.9cfm • 1.5mm Nozzle ASPRAH / 003 High Volume Low Pressure 3 R475 • 4.2 - 7.1cfm • 1.4mm Nozzle ASPRAH / 005 ASPRAG / 101 ASPRAG / 107 R1450 R235 High Pressure 4 R445 (HV-LP) Gravity HV/LP Gravity • 5.1 - 7.8cfm • 2mm Nozzle ASPRAH / 002 Feed Spray Gun Feed Spray Gun Low Pressure • 1.3mm Nozzle • 1.4mm Nozzle 5 R165 • 0.8mm Nozzle ASPRAL / 615 5 6 3 Air Hopper Cup Gun 2 4 1 R395 AHOPPR / 001 • 3 Nozzles: 4.5, 6 & 8mm • (5 Bar) • Continuous Air Flow • Requires 12 - 15cfm

Airless D.I.Y. Spray Guns ELECTRIC 8 9 10 11 12 7 0.5kW, 220V • Max. Flow: 900ml/min • Tank Capacity: 800ml R695 • Nozzle: 1.8mm/2.6mm ASPRAY / 012

R375 ASPRAY / 011 Low Volume Low Pressure • Bar: 2 - 3.5 • CFM Requirements: 3 - 3.9 0.06kW, 220V • Max. Flow: 260ml/min • Tank Capacity: 800ml • Nozzle: 0.8mm 1 Top Feed R545 ASPRAG / 700 2 Top Feed • 1.3mm Nozzle R545 ASPRAG / 500 R595 ASPRAY / 013 (shown) 3 Top Feed (Anodized Finish) • 1.3mm Nozzle R595 ASPRAG / 109 NEW 0.06kW, 220V • Max. Flow: 1 000ml/min • Tank Capacity: 900m • Nozzle: 2.5mm 4 Top Feed Mini High Volume Low Pressure Touch-up l • 0.8mm Nozzle R225 ASPRAG / 110 5 Mini Side Feed Touch-up • 0.6mm Nozzle Mini Oil-less Compressors R345 ASPRAG / 019 Ideal for Air Brushing 6 Gravity Feed Spray Gun Holder R80 ASPRAA / 001 ACOMPR / 002 High Volume Low Pressure • Bar: 1.5 - 3 • CFM Requirements: 4.2 - 7.1 R1695 Double Cylinder (shown) 7 Side Feed • 2mm Nozzle R475 ASPRAG / 021 • 220V • Power: 0.18kW 8 Top Feed • 2.5mm Nozzle • Double Switch: R275 ASPRAG / 025 Auto Start at 3 bar, 9 Auto Start at 4 bar Top Feed • 1.4mm Nozzle ASPRAG / 106 R295 • Max. Pressure: 6 bar 10 Top Feed with Regulator • 1.4mm Nozzle R365 ASPRAG / 827 • Air Flow: 35 - 40l/min 11 Mini Gravity Feed • 1.0mm Nozzle R785 ASPRAG / 300 12 Gravity Feed (on Stand) • 1.3mm Nozzle R895 ASPRAG / 100 R1085 ACOMPR / 001 Air Brush Single Cylinder • 220V • Power: 0.05kW • 68l/min R395 • Air Consumption: 0.4 - 0.8cfm • Max. Pressure: 3.2 bar • Ideal for Air ABRUSH / 008 • 0.3mm Fine Tip Fluid Nozzle R595 Brush or Low Pressure Spray Gun (shown) • 0.2mm Nozzle • Working Pressure: 1 - 3 bar ABRUSH / 002

10 E&OE www.adendorff.co.za 1 YEAR GUARANTEE COMPRESSORS TOP QUALITY Technical support supplied by Love your Tools Protect your compressors. ADENDORFF MACHINERY MART Remember to drain the tank after use. DIRECT DRIVE Motor Output Input Max. Tank Size Size Delivery Power Pressure Price 2hp 110 /min 116psi 1 l 220V 24l 1.5kW (3.88cfm) 8 Bar R1295 COMPRE / 024 2hp 120 /min 116psi 1 l 220V 50l 1.5kW (4.23cfm) 8 Bar R1595 COMPRE / 515 R1595 2.5hp 120 /min 116psi l 220V COMPRE / 515 100l 1.5kW (4.23cfm) 8 Bar R3295 COMPRE / 115 3hp 190 /min 116psi l 220V 100l V-head 2.2kW (7cfm) 8 Bar R3995 COMPRV / 123

BELT DRIVE 2.5hp 170 /min 116psi l 220V 50l 1.5kW (6cfm) 8 Bar R4695 COMPRE / 517 COMPRE / 310 2.5hp 170 /min 116psi R6495 l 220V 100l 1.5kW (6cfm) 8 Bar R5995 COMPRE / 210 2 100l Vertical 3hp 250 /min 116psi 2 l 220V Space Saver 2.2kW (8.83cfm) 8 Bar R6495 COMPRE / 310 (shown) 3hp 250 /min 116psi l 220V 150l 2.2kW (8.83cfm) 8 Bar R6795 COMPRE / 315 3hp 250 /min 116psi 3 l 220V 200l 2.2kW (8.83cfm) 8 Bar R7495 COMPRE / 615 R7495 3 2hp 170 /min 116psi l 220V COMPRE / 615 100l V-head 1.5kW (6cfm) 8 Bar R5495 COMPRV / 120 3hp 250 /min 116psi l 220V 100l V-head 2.2kW (8.83cfm) 8 Bar R6295 COMPRV / 130 3hp 250 /min 116psi l 220V 200l V-head 2.2kW (8.83cfm) 8 Bar R7395 COMPRV / 230 5hp 600 /min 116psi l 380V 300l V-head 4kW (21.2cfm) 8 Bar R12995 COMPRV / 355 7.5hp 670 /min 116psi l 380V 300l V-head 5.5kW (23.66cfm) 8 Bar R13995 COMPRV / 375 10hp 1 050 /min 175psi 4 4 l 380V 500l V-head 7.5kW (28.25cfm) 12 Bar R22950 COMPRV / 510 10hp 1 150 /min 175psi l 380V 500l V-head 7.5kW (37cfm) 12 Bar R23950 COMPRV / 575

OIL-FREE SILENT TYPE R22950 COMPRV / 510 40 /min 101psi 24 Silent Type 0.55kW l 220V l (1.41cfm) 7 Bar R1495 COMPRE / 001 60 /min 101psi 5 50 Silent Type 0.75kW l 220V l (2.1cfm) 7 Bar R2495 COMPRE / 002 R2495 COMPRE / 002 50 Silent Type 0.75kW 120 /min 101psi 5 l l 220V (with 2 motors) 0.75kW (4.23cfm) 7 Bar R3495 COMPRE / 003 0.55kW 100 Silent Type 0.55kW 160 /min 116psi l l 220V (with 4 motors) 0.55kW (5.7cfm) 8 Bar R7495 COMPRE / 004 0.55kW = 2.2kW Motor Max. PETROL DRIVEN PETROL Size Output Delivery Pressure Price DRIVEN 70 4 Stroke 116psi l 6.5hp 360 /min (12.7cfm) (Pull Start) l 8 Bar R7995 COMPRE / 070 150 4 Stroke 116psi l 6.5hp 360 /min (12.7cfm) (Pull Start) l 8 Bar R8795 COMPRE / 071 6 R17795 COMPRE / 705 430l/min (15.5cfm) 145psi 150 Electric Start 10 Bar 6 l 15hp 2 Stage Air Pump COMPRE / 705 600l/min (21cfm) 116psi R17795 8 Bar E&OE 11 PNEUMATIC EQUIPMENT Pneumatic Screwdrivers

Polisher/Buffer Pneumatic Drills HEAVY R325 DUTY ASCRWD / 002 ADRILR / 007 R1195 10mm ( ”) Straight • 4cfm Adjustable Clutch R1395 • 7cfm APOLIS / 175 ⅜ 1

175mm Air Angle Type (shown) • 12cfm 1 Spring Balancer • Free Speed: 2 500r/min• Spindle Thread Size: " Takes the weight Reversible • 6cfm R270 • Suggested Min. Compressor: 4kW of 1kg Air tool off ABALAN / 100 your hand • Safety Lever Throttle ⅝ With Key 10mm R375 ADRILR / 010 2 Pneumatic Screwdriver, R645 12.5mm (shown) R425 ADRILR / 005 175mm Vertical Type • 6cfm 4.55mm ASCRWD / 455 • Free Speed: 2 000r/min Keyless • Spindle Thread Size: " - 16mm 10mm R385 ADRILR / 011 2 • Suggested Min. Compressor: 2.2kW ⅝ 12.5mm R425 ADRILR / 012 R645 APOLIS / 177 R70 ADUSTR / 001 R325 Air Duster Gun AHAMMC / 190 190mm Hammer Action Chisel Set R115 • 5cfm ACLEAN / 001 Air Grinders Engine Cleaning Gun • 2 - 4 bar

112mm R745 AGRIND / 112 R695 R195 AGUNUC / 002 125mm R1295 AGRIND / 125 ASCALD / 190 Pneumatic Undercoating 175mm Needle Descaler and 190mm Air Hammer Gun R1795 AGRIND / 176 • Suction Feed Type Chisel Set (shown) • 5cfm • Max. Pressure: 9 bar 180mm (shown) R1495 AGRIND / 180 VY Needle Descaler (Barrel Type) 75mm Grinding Cut-Off Tool HEA • 5cfm DUTY R275 R1745 ASCALD / 001 AGUNUC / 001 R275 Rubberizing/Stone ACUTTO / 075 Grease Gun Kit (pistol type) Chipping Gun • 6cfm

ALSO AVAILABLE R495 Cutting Discs AGREAS / 001 R145 R20 ACUTTD / 001 AGUNWT / 001 Pneumatic Watering Gun 6 Piece • 6cfm Air or Hand Operated • 3cfm • 400cc 5 Piece DIY Air Tool Kit Metal Shear • Can also work off a Truck’s Air Compressor R345 R575 ASPRAK / 006 ASHEAR / 001 • 4cfm • Cuts, Trims, Outlines and Shears Plastic, Tin, Aluminium and Other Metals up to 18# Rolled Steel R775 Pneumatic Body Sabre Saw • Capacity: 1mm max. Mild Steel ASAWBD / 001 with 2 Blades • 6cfm

12 E&OE www.adendorff.co.za PNEUMATIC EQUIPMENT

Compressors AUTOMAN Range

Motor Input Max. CFM (Free Air DIRECT DRIVE Size Delivery Pressure Delivery) Price R9750 1 COMPRA / 130 2hp 1.5kW 220V 8 Bar 3.8cfm 50l R3795 COMPRA / 015 2hp 1.5kW 220V 8 Bar 4.23cfm 90l R4295 COMPRA / 115 BELT DRIVE 2hp 1.5kW 220V 11 Bar 4.7cfm 90l R7895 COMPRA / 120 1 3hp 2.2kW 220V 11 Bar 8.9cfm 90l (shown) R9750 COMPRA / 130 2 3hp 2.2kW 220V 11 Bar 8.9cfm 200l (shown) R11750 COMPRA / 232

270l 5.5hp 4kW 380V 11 Bar 14.6cfm COMPRA / 345 R17495 2 7.5hp 5.5kW 380V 11 Bar 23.3cfm 500l R27995 COMPRA / 555 10hp 7.5kW 380V 11 Bar 32cfm 500l R31950 COMPRA / 755 Backed by ATLAS COPCO SOUTH AFRICA R11750 COMPRA / 232

Sanders Nailers & Staplers

Brad Nailers R545 Required Air Consumption: 2 - 4cfm ASANDA / 020 Dual Action AMULTI / 022 F-Nails – 18# Gauge ASANSL / 010 R595 F-Nails • 8 - 10cfm Heavy Duty 30mm (small head) R995 4-in-1 Variable Speed Smooth Action • Stick on pad type • 10 - 30mm (shown) R795 ANAILA / 030 30mm 50mm Double Piston Straight Line • Pad Size: 150mm Multi Function Air Tool Heavy Duty 50mm • 4 - 6cfm • Adjustable Air Flow for • 15 - 50mm R1095 ANAILA / 050 10 15 a Virtually Scratch Free • Stroke: 2 100/min DIY F30 Finish • Paper Size: 70 x 445mm • 10 - 30mm R345 ANAILF / 030 30 50 DIY F50 T-Nails Palm & Finishing Sanders (6-8cfm) • 15 - 50mm R425 ANAILF / 050 (large head) R695 T-Nails – 16# Gauge 50T 64T ASANOR / 002 50T • 20 - 50mm 20 25 R545 ASANOR / 001 R965 ANAILR / 650 125mm (5”) Pneumatic Dual Pneumatic Orbital 64T • 32 - 64mm ANAILR / 664 50 55 Action Palm • Stick on Pad Type Finishing Sander R1095 ALSO AVAILABLE ANAILA / 055 With Self Vacuuming 125mm/150mm Velcro Sanding Pads & R395 Function (velcro type) R595 ASANOR / 005 Sanding Discs. ENQUIRE IN-STORE 50mm Combination Nailer and Stapler Staplers • For 18# Nails and Staples Required Air Consumption: 5.8mm Crown • Safety Pin ANAILR / 660 2 - 4cfm • Quick Release Nose Piece for R1145 fast clearing of jams Industrial 18 - 64mm • Required Pressure: 4 - 7 bar Concrete Nailer R685 • Ideal for nailing skirtings to the wall ASTAPL / 010 • Required Pressure: 4 - 7 bar Wide Range of Nails & Heavy Duty Model Staples Available (shown) 10 Industrial Coil Nailers • Ideal for the Fabrication 10 of Pallets & Log Homes • 5 - 7 bar Capacity: 10 - 22mm Staples Crown: 10mm 13 R1495 45 - 70mm (shown) R2695 ANAILR / 900 DIY Model ANAILA / 028 19 45 - 90mm ANAILR / 909 R2995 Capacity: 6 - 13mm Staples Industrial 34° Clipped Head Nailer Crown: 10mm ALSO AVAILABLE • Range: 50 - 90mm • Shank Ø: 2.98 - 3.33mm 50, 70 & 90mm Coil Nails (on a roll). R295 ASTAPL / 013 ALSO AVAILABLE Nails Available: 50, 75 & 90mm

0861 ADENDO / 0861 23 36 36 E&OE 13 PNEUMATIC EQUIPMENT Air Line Hoses Pneumatic Riveters R245 HEAVY AHOSES / 020 HEA VY R80 Blue PVC Flex Hose ACOUPL / 005 DUTY 8mm I.D. Ø, 20m with 5 Piece Brass Quick Coupler Set Couplings (shown) For use on all Air Operated Equipment R745 Blue PVC Flex Hose R175 ARIVET / 003 Air Die Grinder Kits 8mm I.D. Ø, 10m with Couplings AHOSES / 028 For Steel & Clear Braided Flex Hose R235 Aluminium Rivets For grinding 8mm I.D. Ø, 20m with Couplings AHOSES / 025 • 4.2cfm R1195 those Blue PVC Flex Hose ARIVET / 001 difficult to R1000 ALSO AVAILABLE 8mm I.D. Ø, 100m Roll AHOSES / 006 (shown) reach areas Complete Set with • 4 Nozzles Heavy Duty RUBBER Reinforced Service Kit • 4.2cfm • 4.2cfm • For Rivets 8mm I.D. Ø R17 per meter cut (min 10m) 2.4 - 4.8mm R295 14 Piece (shown) 10mm I.D. Ø per meter cut (min 10m) R1395 • 8cfm • 25 000rpm AGRIND / 001 R20 ARIVET / 002 • Collet Chuck Capacity: 3mm & 6mm Air Die Grinder

ARIVNR / 001 R325 R945 HEAVY Air Riv Nut Tool AGRINK / 017 • M4, M5, M6, M8 17 Piece Micro Type DUTY • 8cfm • Flex Hose • Ideal for Tyre Repair R1645 • 3mm Shaft Fitting • Grinding Stones • Includes Bits AGRIND / 002

Water Trap Filter & Regulator (only) R425 42 Piece Pneumatic Tool Kit TOP 1 1 AREGUW / 004 QUALITY 6mm (¼”) R495 AREGUW / 001 R1895 ATOOLK / 042 1 12.5mm (½”) R495 AREGUW / 125 • 8 - 10cfm 2 Combination Regulator, Oiler & Water Trap Filter • 12mm (½”) Drive Impact (as illustrated) Mini Water Wrench with 10 Sockets • Heavy Duty Dual Action Trap Filter & 1 + 2 6mm (¼”) R595 AREGUO / 002 Sander Regulator • 6mm Air Die Grinder and 1 + 2 12.5mm (½”) R595 AREGUO / 125 • 6mm (¼”) Stones • 10mm Reversible Air Drill and Bits • 150mm Air Hammer with Spray Pots Chisels Industrial Quality (excluding Gun & Hose) Required Air Consumption: 8 - 12cfm 20 with Auto Agitator (shown) l R4495 ASPRAP / 022 Airless High Pressure Sprayer 20l with Manual Agitator R3995 ASPRAP / 021 10l with Auto Agitator R3795 ASPRAP / 012 10 with Manual Agitator R8995 l R2695 ASPRAP / 011 ASPRAY / 007 40l with Manual Agitator R6595 ASPRAP / 040 • Motor: 220V, 650W, ¾hp ASPRAP / 002 • Max. Pressure: R995 20 bar 2l with Gun, Gauge & Hose • Standard Nozzle Size • Min. 35psi • Max. 50psi ASPRAP / 010 • Spraying Width: R1795 • Hose Size: 10mm 250 - 310mm 10l with Gun, Gauge & Hose • Material Output: • Flow Rate: 1.44l/min • Operating Pressure: 3 - 4 bar 11cfm • Length of Pressure • Air Consumption: 6.0 - 8.8cfm Hose: 15m • High Pressure Industrial • Weight: 17.5kg 10l Steel Pressure Tank • Including Gun, Hose, Gauge, Regulator, etc.

14 E&OE www.adendorff.co.za PNEUMATIC EQUIPMENT Impact Wrenches

HEAVY DUTY

1 2 25mm (1”) Drive with Extended Shaft HIGH 12.5mm (½ ) Twin Hammer (shown) (for reaching Deep Truck Wheels, etc.) QUALITY 1 ” • 6cfm • 720Nm R895 • Required Air Consumption: 10 - 15cfm AWRENC / 007 2 600Nm 5.8 - 9.8 bar 12.5mm (½”) Twin Hammer R3395 AWRENC / 026 R995 • 6cfm • 850Nm AWRENC / 008 R495 TOP 3 200Nm 5.8 - 9.8 bar QUALITY R3695 AWRENC / 032 19mm (¾”) Twin Hammer R2195 AWRENC / 015 4 800Nm 5.8 - 9.8 bar • 8 - 12cfm • 1 300Nm AWRENC / 009 R4295 AWRENC / 048 15 Piece 12.5mm (½”) 2 600Nm 5.8 - 9.8 bar 19mm (¾”) Twin Hammer 2 R2495 Drive Ratchet Wrench Kit (Short Anvil) R3295 AWRENC / 027 (shown) • 8 - 12cfm • 1 600Nm AWRENC / 005 • 8cfm

Air Inflator/Deflator Air Wrench Kits Impact Socket Sets R145 AGAUGE / 004 R695 Air Tyre Inflator with Hose, TSOCKE / 038 Nozzle and Gauge 38 Piece AGAUGE / 000 12.5mm R345 (½”) Drive Air Tyre Inflator with Hose, Metric/Imperial Nozzle and Gauge • Robust Design • 0 - 15 bar AWRENC / 001 Garage Type R795 R825 12.5mm (½”) Drive TSOCKE / 015 • Complete with 10 Sockets: 9, 10, 11, 13, 14, 17, 19, 22, R495 24, 27mm AGAUGE / 001 • Push Button Forward and 15 Piece 12.5mm (½”) Drive, (75mm) Deep Metric Reverse • 10 - 24mm • 6 - 8cfm R895 TSOCKE / 010 AGAUGE / 002 R895 PER SET TSOCKE / 011 10 Piece 1” or ¾” Drive (88mm deep) Compressors • 21, 22, 24, 27, 29, 30, 32, 35, 38, 41mm YEAR GUARANTE Motor Free Air Input Max. 1 E BELT DRIVE Size Delivery Power Pressure Price 2hp 136l/min 145psi R7995 1 100l (shown) 220V 1.5kW (4.8cfm) 10 Bar R7995 COMPRI / 120 COMPRI / 120 3hp 190 /min 145psi 100 l 220V l 2.2kW (6.7cfm) 10 Bar R9950 COMPRI / 130 100l Belt Drive 3hp 190 /min 145psi 200 l 220V l 2.2kW (6.7cfm) 10 Bar R11795 COMPRI / 232 1 5.5hp 451 /min 145psi 200 l 380V l 4kW (15.9cfm) 10 Bar R17995 COMPRI / 240 7.5hp 620 /min 145psi 270 l 380V l 5.5kW (21.9cfm) 10 Bar R22995 COMPRI / 275 10hp 705 /min 145psi 2 500 l 380V l (shown) 7.5kW (25cfm) 10 Bar R30995 COMPRI / 575 Backed by Ingersoll-Rand South Africa ALSO AVAILABLE R30995 Range of Ingersoll-Rand Pneumatic Tools Including ½'' - 1'' Impact Wrenches, COMPRI / 575 Drills, Polishers, etc. 500l Belt Drive Type 30 – Industrial Cast Iron Head Compressors 4kW - 15kW (270l - 500l) 2 Visit website for more details www.adendorff.co.za Available ex JHB Warehouse Only.

0861 ADENDO / 0861 23 36 36 E&OE 15 1 WOODWORKING Love your Tools (12”) 300mm Combination Planer Measure twice Thicknesser (Available in 220V or 380V) (Excluding 2 ) Industrial Automatic Planers and cut once 381mm 508mm R29950 (15”) (shown) (20”) 2 220V Motor 2.2kW, 220V 2.2kW, 220V WPLANE / 400 Cutter Head 76mm 80mm Thickness of Stock 152mm 204mm 380V Width of Stock 305mm 508mm Planer 1 WPLANE / 402 Depth of Cut 3mm 3mm Thicknesser Table Size 381 x 508mm 630 x 510mm OPTIONAL EXTRA Weight 210kg 375kg 2 Morticing Attachment for TOP Combination Planer R17995 R24995 QUALITY WPLANE / 375 WPLANE / 020 R4295 WPLANE / 401

Drum Sander Surface Planer/Jointer R6995 R3895 WPLANE / 150 EGRINU / 001 150mm (shown) • Motor: 0.55kW, R1195 220V wsands / 015 Universal Surface & Blade ALSO AVAILABLE Belt/Disc Sander Sharpener, Grinder 200mm • Motor: 0.30kW, 220V • Motor: 0.36kW, 220V • Motor: 1.5kW, 220V • Max. Length: 600mm • Belt Width: 25mm WPLANE / 200 • Disc: 125mm • Ideal for Sharpening Planer Blades R13995

Spindle Moulders WSANDD / 314 R9950 ALSO AVAILABLE • Motor: 1.1kW, 220V 30mm Deluxe • Drum Width: 400mm 12.5mm & 30mm Spindle Cutter Block Profile Sets. ENQUIRE IN STORE with Sliding Table • 1 420rpm and Telescopic (shown) 30mm 12.5mm Arm Motor 220V, 1.1kW 220V, 0.75kW 380V, 2.2kW Working Table 610 x 534mm 455 x 395mm 1 000 x 360mm R8995 Max Mortising 12mm 6mm 12mm WSANDH / 001 Width & Depth Spindle Travel 75mm 22mm 100mm Horizonal Belt Sander Weight 140kg 60kg 270kg • Motor: 1.1hp, 220V • Belt Size: 2 000 x 152mm R11895 R7595 R34995 WSPIND / 030 WSPIND / 125 WSPIND / 001

Wood Lathes R3295 wsands / 012 300mm Disc Power Tool Accessories Sander on Stand Wood Turning Chisel Set 8 Piece Standard (shown) WLATHE / 001 • Motor: 0.75kW, • In Carry Case R3995 220V 450mm Between Centres Bench Type R395 WCHIST / 009 R5995 • Motor: 0.55kW, 220V 8 Piece Professional WLATHE / 900 6" x 9" Sander on Stand • H.S.S. in Carry Case R1895 WCHIST / 010 R4495 900mm Between wsands / 069 1 000mm Bench Type R1995 4" x 6" Belt & Disc Centres with Swivel Head • Motor: 0.37kW, 220V WLATHE / 100 • Motor: 0.55hp, Sander Bench Type • Motor: 0.55kW, 220V 220V • Belt Size: 100 x 915mm ALSO AVAILABLE • Disc: 230mm • 10 Variable Speeds • Belt Size: • 500 - 2 000rpm Range of Wood Lathe Chucks. ENQUIRE IN STORE 1 220 x 150mm R2295 WSANDS / 016 • Swivel Head for various turning functions

16 E&OE www.adendorff.co.za WOODWORKING Dust Collectors (shown) 300mm Panel Saw with Saw 2.2kW 0.75kW 1.5kW 380V Motor, Scoring Function 220V Motor, 220V Motor, Double Head 380V 220V Single Bag Single Bag Double Bag Fan Ø 230mm 300mm 305mm R44995 R42495 Inlet Ø 100mm 125mm 150mm WSAWPN / 303 WSAWPN / 302 Bag Ø 370mm 500mm 500mm Bag height 640mm 850mm 850mm 600cfm 1 490cfm 2 300cfm Air Speed (14.15m3/mm) (42.15m3/mm) (65.09m3/mm) R2995 R4495 R6495 WDUSTC / 001 WDUSTC / 002 WDUSTC / 003

700mm Bench Morticer MAC AFRIC 393 Combination Woodworking Machine R3250 WMORTI / 007 Planer, Circular Saw, Drill, • Motor: 2.2kW • Motor: 0.37kW, 220V Thicknesser, Morticing, etc. • Sliding Action: • Chuck: 13mm 2 800mm • Spindle Speed: 1 400rpm • Saw Blade Ø: 300mm ALSO AVAILABLE • Bushing Size: 19.05mm • Major Table Size: 385 x 800mm Range of Adjustable • Chisel Capacity: 6 - 12mm • Length of Sliding Table: 3 200mm Roller Stands. • Suitable for Standard Full Sheet Size ENQUIRE IN STORE

Band Saws TOP 8" Radial Arm with Stand QUALITY

WSAWRA / 001 VARY COLOUR MAY R4795 (shown) • Motor: 1.3kW, 220V 350mm (14”) 400mm (16”) • 4 200rpm Motor 0.75kW, 220V 1.55kW, 220V • Ø of Sawing Wheel: 210mm WPLANM / 393 • Max. Rip Cut: 5-5mm R16995 Capacity 335 x 160mm 370 x 200mm • Motor: 2kW, 220V Table Pivot • Depth of Cut at 45°: 49mm 0 - 45° 0 - 45° • Depth of Cut at 90°: 54mm • Planing: 300 x 3mm Capacity • Max. Cross Cut: 278mm • Sawing: 300 x 85mm Blade Size 2 480mm 2 950mm • Table Size: 700 x 560mm • Drilling: 13mm • Thicknessing (H): 6 - 125mm R7995 R12995 WSAWBS / 014 WSAWBS / 016 250mm D.I.Y. Table Saw with Extended Rip Saw Table Sides and Sturdy Stand 250mm MAC AFRIC Contractors Mobile R2995 R4995 Tilting Arbor Table Saw WSAWLD / 001 WSAWMD / 300 • Motor: 1.5kW, 220V, Direct Drive wsawhd / 251 • Bore Ø: 16mm 300mm • Motor: 1.5kW, R6995 • Blade Ø: 250mm 220V Direct Drive With Adjustable Stand • Table Size: 685 x 515mm • Blade Size: 315mm • Motor: 1.5kW, 220V • Capacity: 2.8mm • Max. Cutting Height: 90mm • Mitre Angle: 45° Cutting Depth - 55mm • rpm, no load: 2 780 90° Cutting Depth - 80mm • Table Extension: 810mm Mitre Saws • Table Size: 550 x 800mm 250mm Tilting Arbor Table Saw 400mm Scroll Saw R1495 WSAWMT / 120 Compound • 220V • 50Hz R14995 • 1 200W • 4 500rpm WSAWHD / 250 • Cuts 0 - 45° • Blade Size: 210 x 2.8 x 19.5mm • Motor: 2.2kW, 220V, Belt Driven • Mitre Angle: 45° R3295 WSAWMT / 200 • Blade Size: 254mm • 220V • 50Hz • 2 000W • rpm, no load: 2 900 • 4 500rpm • Cuts 0 - 45° • Max. Cut Depth: 85mm WSAWST / 016 • 45° Tilting Motor • Gross Weight: 110kg R1295 • Blade Size: 254 x 15.9 x 2.8mm • Table Size: 508mm x 686mm • Motor: 0.085kW • 220V

0861 ADENDO / 0861 23 36 36 E&OE 17 PETROL

2 STANDBY GENERATORS R27950 With many year’s MGENER / 010 experience in delivering Quality Tools & Machinery at affordable PETROL Love your Tools prices, our range of Generators carry Look after your standby the “MAC AFRIC” accolade with generator. Remember to 1 charge the batttery when superior back up not in use. & support. R9495 MGENER / 008 Estimated average fuel Nominal Rated Current Output Electric Recoil kVA Voltage (V) consumption AVR Price Output (A) Start Start (Load dependant)

0.81kVA 650W 2.9 Amp (2 stroke) 220V 0.32l/h ✗ ✗ ✓ R1695 MGENER / 090 1.25kVA 1kW 4.5 Amp 220V 0.43 /h P E TR O L l ✓ ✗ ✓ R2795 MGENER / 201 2.8kVA 2kW 9.1 Amp 220V 0.8l/h ✓ ✗ ✓ R3695 MGENER / 220 2.8kVA 2kW 9.1 Amp 220V 0.82l/h ✓ ✓ ✓ R4695 MGENER / 221 5.6kVA 4kW 18.2 Amp 220V 2.2l/h ✓ ✗ ✓ R5795 MGENER / 450 6.5kVA 5kW 22.7 Amp 220V 2.2l/h ✓ ✓ ✓ R6495 MGENER / 553 6.5kVA 5kW 22.7 Amp 220V 2.2l/h ✓ ✓ ✓ R6995 MGENER / 550 1 8.75kVA 7kW 31.8 Amp 220V 2.84l/h ✓ ✓ ✓ R9495 MGENER / 008

G enerators 2 12.5kVA 10kW 45.5 Amp 220V 4.06l/h ✓ ✓ ✗ R27950 MGENER / 010 18.6 Amp (380V)/ 12.5kVA 10kW 380V/220V 4.06 /h ✓ ✓ ✗ PORTABLE STANDBY STANDBY PORTABLE 15 Amp (220V) l R28945 MGENER / 011

6.5KVA DIESEL DIESEL 6.5KVA 37.5KVA

R295 GCANJR / 020 20l Jerry Can DIESEL for Fuel, 0.8mm 3 4 5 Available in R12950 R15995 R108750 MGENER / 656 MGENER / 605 MGENER / 932 Estimated Nominal Rated Current average fuel kVA Voltage (V) Model Description AVR Price Output Output (A) consumption (Load dependant)

3 6.5kVA 5kW 22.7 Amp 220V Open Type 1.67l/h ✓ R12950 MGENER / 656 DI ESE L 6.5kVA 5kW 22.7 Amp 220V Silent Type 1.67l/h ✓ R14995 MGENER / 604 9.3 Amp (380V) / 4 6.5kVA 5kW 380V / 220V Silent Type 1.67 /h 5.9 Amp (220V) l ✓ R15995 MGENER / 605 18.6 Amp (380V) / 12.5kVA 10kW 380V / 220V Silent Type 3.4 /h 15 Amp (220V) l ✓ R53995 MGENER / 111 20kVA 16kW 30.3 Amp 380V / 220V Silent Type with ATS 4.4l/h ✓ R98995 MGENER / 020

5 37.5kVA 30kW 54 Amp 380V / 220V Silent Type with ATS 7.95l/h ✓ MGENER / 932 STANDBY STANDBY G enerators R108750 50kVA 40kW 72 Amp 380V / 220V Silent Type with ATS 10.3l/h ✓ R124950 MGENER / 942 Warranties on Generators will be nul and void if not installed by qualified electrician. All batteries are excluded from the warranty. T&Cs apply. See page 36.

18 E&OE www.adendorff.co.za POWERPLUS® POWER TOOLS HIGH QUALITY TOOLS

4 NEW 1 3 2 10 9 5 11

Disc not included 6 8

12 7 18 13 17 NEW 14 19 16 Disc not included 20 15

1 710W Impact Drill 10 R595 YDRILI / 002 950W Belt Sander R1165 YSANDB / 001 1 200W Impact Drill 11 R1145 YDRILI / 003 220W Mouse Sander R495 YSANDM / 001 2 18V Lithium Ion Cordless Drill 12 900W Biscuit Jointer • Includes 2 batteries R1295 YDRILC / 068 R795 YBISCT / 001 13 1 400W Circular Saw R1295 YSAWCL / 001 14.4V Lithium Ion Cordless Drill R1095 YDRILC / 065 14 1 200W Plunge Saw NEW 3 R2495 YSAWCL / 002 1 600W Rotary Hammer Drill R1595 YDRILR / 155 Split Tracks (x2) for Plunge Saw 4 NEW R545 YSAWCL / 003 750W Rotary Hammer Drill NEW YDRILR / 117 R1395 15 600W Variable Speed Jigsaw 5 R535 YSAWJG / 001 900W, 115mm Angle Grinder R495 YGRIND / 900 810W Variable Speed Jigsaw YSAWJG / 002 6 720W Reciprocating Saw R795 R795 YSAWRP / 001 16 900W Planer YPLANE / 001 7 R975 1 200W Variable Speed Router R1125 YROUTR / 001 17 1 500W Rotary Hammer Drill R1845 YDRILH / 006 1 500W Variable Speed Router R1595 YROUTR / 002 18 8 950W, 115mm Angle Grinder YGRINH / 950 200W Orbital Finishing Sander R485 YSANDF / 001 R695 19 2 450W, 230mm Angle Grinder 330W Orbital Finishing Sander R625 YSANDF / 002 R1495 YGRINH / 230 9 20 1 200W Belt Sander 450W Random Orbital Sander R785 YSANDR / 001 R2175 YSANBH / 002 1 800W, 210mm Circlular Saw R1995 YSAWCH / 002 Polishers

R795 R725 R325 TPOLIS / 001 TPOLIS / 180 TPOLIS / 182 Car Buffer (Household use only) Angle Polisher Vertical Polisher • Includes Polishing and Buffing Pads • 1 400W • 180mm • 570W • 180mm • Ideal for the Motoring Enthusiast

NEW Demolition Breakers R595 TNAILA / 001 Electric Nailer & Stapler • 18# F-nails: 10 - 32mm • Type 600 Staples - up to 25mm R9850 TBREAK / 205 • 2 050W • 50J • 45kg Makita Power Tools available. Enquire in store R995 TSAWCL / 120 1 200W Twin Blade Circular Saw • Blade: 125mm • Cutting Capacity: 31mm R4495 Jack Hammer • Plastic, Wood, PVC, Copper, Hard & Soft Metals TBREAK / 110 • 1 500W • 45J • 20kg • Low Kickback

0861 ADENDO / 0861 23 36 36 E&OE 19 CONSTRUCTION AND PLUMBING Vacuum Cleaners High Pressure Cleaners High Pressure Cleaner 70l Wet & Dry (shown) Quality Brushless • 2 000W Motor HCLEAN / 001 R3595 R9750 HVACUM / 070 • Dual 80 Bar, 220V, 2.2kW Motor R2695 120 Bar, 380V, 3.0kW HCLEAN / 150 HCLEAN / 002 R9950 MAC AFRIC 150 bar Hand Held Laser Distance Meters (shown) Range up to 40m TLASER / 004 Wasp R1995 Ideal for angle measuring Range: 0.05m - up to 80m 110 bar TLASER / 005 • Accuracy up to 80m (± 1.5mm) R895 D.I.Y. 30l Wet & Dry • 1 200W Household 1 100W Wall Chaser R1695 HVACUM / 030 R1495 Reduces Dust HCLEAN / 200 Engraving R3895 TCHASW / 001 • For easy Electrical Installations • 7kg • Anti Locking Button ALSO AVAILABLE R195 • Max. Depth: 30mm 25mm Cutter 35mm Cutter HENGDR / 005 • Max. Width: 30mm • Blade Speed: 1 600/min R345 R495 150 Piece Accessory Kit T-bar Clamps F-Clamps 770mm R275 1 370mm R325 R295 HENGDR / 004 1 070mm 1 710mm 120 x 250mm Electric Combination Multi Tool R295 R365 R135 Protect your Valuables. 120 x 400mm • 125W • 220V R155 Engrave on Wood, Glass, • Ideal for Engraving on Steel, G-Clamps 150mm R115 120 x 600mm R175 Metal, Plastic, Ceramics, Plastic, Glass, etc. Leather, etc. 200mm R160 120 x 1 000mm R225 HENGEL / 001 75mm 100mm 250mm R215 R160 R70 R90 300mm R235 Pressure Pumps Borehole Pumps NEW R2250 HPUMPP / 009 0.75kW End Suction Single 0.37kW-EM14 R4495 HPUMPB / 037 Stage Pump with Flow Control • 90l/min • Max. Pressure: 2.8 Bar 0.75kW-EA17 R5250 HPUMPB / 075 NEW 1.12kW-EB15 R5995 HPUMPB / 112 R1695 HPUMPP / 004 R1475 HPUMPP / 008 For detailed Curve INCLUDES Control Box Charts visit our website 0.75kW • 85l/min • 40m Head 0.37kW End Suction and Splice Kit www.adendorff.co.za Peripheral Vane Pump with MADE IN SOUTH AFRICA R1995 HPUMPP / 005 Flow Control Sewage Pump 1.1kW • 100l/min • 48m Head • 40l/min • Max. Pressure: 4 Bar

R4895 R2895 Submersible Pumps DOMESTIC HPUMPD / 202 HPUMPD / 101 • 1.1kW • 0.55kW These pumps are ideal for the drainage of infiltration water in domestic applications such as • 230V • 230V emptying of swimming pools and for the operation in decorative fountains and waterfalls. • 16m Head • 8m Head • Max. Flow: SP400 with Float Switch (Clean • Max. Flow: HPUMPS / 001 14m3/h 20m3/h Water), 5m Head (shown) R795 • Pump Body: • Pump Body: SP550 with Float Switch, 7m Head Cast Iron Stainless Steel R895 HPUMPS / 002 • With Float Switch • Without Float SP900 with Float Switch, 8.5m Head R1095 HPUMPS / 003 Switch

20 E&OE www.adendorff.co.za Garage Work Table/Bench 3 Tier Service Trolley GARAGE EQUIPMENT with Peg Board R795 Vices Industrial Quality Steel Work Bench with can be GTROLL / 003 fixed to 3 Smooth Rolling Lockable Drawers Bench • 810 x 390 x 750mm including Wheels • Colour may vary

• L = 2 000mm R5995 W = 640mm H = 860mm GBENCH / 001 • Weight: 110kg Tool Trolley

ALSO AVAILABLE R2495 R4795 R1495 Industrial Work Bench GTROLL / 001 L = 1 500mm W = 640mm H = 860mm GBENCH / 000 GBENCH / 003 • With Top Cabinet • 1 210 x 610 x 1 500mm (D.I.Y.) • Lockable • 2 Drawers (Removable) Tool Box Tool Cabinet • 760 x 410 x 870mm including Wheels 6 Drawer R1495 5 Tray Cantilever Tool Box (Top) TCABIN / 005 425mm • Fits on 7 Drawer Tool Cabinet R195 R445 TTOOLB / 005 • 600 x 310 x 330mm TTOOLB / 004 535mm 5 Tray • Concave Design. This provides extra stability R295 and better weight distribution TTOOLB / 007 • Hammertone Blue • Size: 459 x 255 x 333mm Wall Mounted Tool Cabinet

7 Drawer Tool Cabinet

7 Drawer with R3995 TCABIN / 007 TTOOLB / 001 R13495 Castors P.O.A. TCABIN / 003 • 690 x 460 x 890mm including Wheel • L = 1 200mm W = 200mm H = 600mm • 3 Doors with Adjustable Shelves • Packed in Includes Tools easy to assemble kit form • Colour may vary 200+ Pieces Tool Boxes • Smooth Action Castors (Lockable) 7 Drawer Tool Cabinet • Lockable Drawers • Height: 1 040mm

SEE WEBSITE FOR DETAILED R7695 SPECIFICATIONS TCABIN / 009 Includes Examples of Trays. Combinations may vary Tools Aluminium (Trommel) (shown) 120 Pieces 725 x 300 x 270mm R1295 TTOOLB / 071 1 250 x 380 x 380mm R2095 TTOOLB / 081 Black Heavy Duty Steel (Trommel) Examples of Trays. Combinations may vary 725 x 300 x 270mm R1095 TTOOLB / 021 7 Drawer Cabinet (Blue) excluding Tools 1 250 x 380 x 380mm R1895 • Height: 1 040mm TCABIN / 004 TTOOLB / 059 R5995

0861 ADENDO / 0861 23 36 36 E&OE 21 MECHANICS TOOL SETS & HAND TOOLS Chrome Alloy Mechanics Socket Sets R495 TSOCKE / 019 R3695 TSOCKE / 126 19 Piece • 20 Chrome Alloy Metric Sockets: 21, TSOCKE / 000 Socket Set on 22, 23, 24, 26, 27, 28, 29, 30, 31, 32, R345 Hanger 34, 36, 38, 41, 46, 50, 55, 60, 65mm 25 Piece Socket Set • ¼” Drive • ½” Drive 27 Piece 19mm 7 15 1 3 5 3 • 12 SAE Sockets: /8”, /16”, 1”, 1 /8”, 1 /16”, 1 /16”, 1 /8”, 7 5 3 7 HEA Chrome Vanadium Deep Sockets 1 /16”, 1 /8”, 1 /4”, 1 /8”, 2” R2795 VY • 10 Metric Sockets: 22, 24, 27, 30, 32, 36, 38, 41, TSOCKE / 127 DUTY 46, 50mm R395 TSOCKE / 111 9 Piece ½” Drive (shown) Imperial/SAE/AF 108 Piece Socket Set 13, 14, 15, 16, 17, 18, 21, 22, 24mm 10 Piece ¾” Drive 9 Piece ¼” Drive 8, 10, 11, 12, 14, 15, 16, 5, 6, 7, 8, 9, 10, 11, R1495 17 18mm 12, 13mm TSOCKE / 180 R345 TSOCKE / 109 R125 TSOCKE / 113 R595 TSOCKE / 020 • ¼” & ½” Torx “E” Socket Set ½” Drive 3 Drive 10, 11, 12, 14, 16, 18, 20, 22mm 20 Piece /8” Drive 1 5 3 7 1 3 11 3 13 • Chrome • /4”, /16”, /8”, /16”, /2”, /16”, /16”, /4”, /16”, TSOCKE / 129 7 15 Vanadium R195 /8”, /16” 42 Piece VDE Electrical Tool Set in Bag 15 Piece Gear Wrench Set TOP 72 Tooth QUALITY For Smooth R1295 R2695 Action TTOOLB / 042 GWRENC / 015 9 Piece 1 3 R145 /4” - /4” TSPANN / 909 14 Piece 1 1 R425 /4” - 1 /4” (shown) TSPANN / 914 6 Piece Jumbo 22 Piece Combo Set Spanner Set IMPERIAL/METRIC R395 • 8, 10, 11, 13, 14, 17, 19, 22, 24, 27, 30, 1/ 7/ TSPANN / 922 1 3 1 3 4” - 8” and 6 - 19mm 32, 36, 41, 46mm • /4”, /8”, /2”, /4” R895 TSPANN / 600 • 35, 38, 41, 45, 48, 50mm 72 Tooth • Black Oxide Finish Gear Wrenches For Smooth Action

8, 10, 11, 12, 13, 14, 17, 8 Piece (shown) 19mm R495 TSPANR / 008 12 Piece 6, 8, 10, 11, 13, 14, 17, Chrome Vanadium 19, 22, 24, 27, 30mm R995 TSPANR / 012 Combination Spanner Sets 8 Piece with 8, 10, 11, 12, 13, 14, 17, Forward & Reverse 19mm R625 TSPANR / 009 Ratchet Function 1 12 Piece with 6, 8, 10, 11, 13, 14, 17, Flexible Head 19, 22, 24, 27, 30mm R1195 TSPANR / 014 8 Piece • 8, 10, 11, 12, 13, 14, 17, 19mm R95 TSPANN / 008 11 Piece • 6, 7, 8, 9, 10, 11, TOP 12, 13, 14, 17, 19mm R140 TSPANN / 011 Combination Chrome Vanadium Spanner Sets 1 QUALITY 12 Piece • 6, 7, 8, 9, 10, 11, • In Canvas Pouch 12, 13, 14, 15, 17, 19mm R150 TSPANN / 012 26 Piece Satin 16 Piece • 6, 7, 8, 9, 10, 11, 1 6 - 32mm R1095 12, 13, 14, 15, 16, 17, 18, 19, Finish CRV (shown) TSPANN / 027 R245 TSPANN / 016 20, 22mm 17 Piece Satin 6 - 24mm R345 17 Piece • 6 -20, 22, 24mm Finish CRV TSPANN / 018 1 (shown) R295 TSPANN / 017 25 Piece Matt CRV 6 - 30, 32mm R875 19 Piece • 6 -32mm TSPANN / 026 R475 TSPANN / 019

22 E&OE www.adendorff.co.za LIFETIME GUARANTEE MECHANICS TOOL SETS SPECIAL Hexa Socket Sets are manufactured from the best quality Chrome 85 Piece Tool Vanadium Steel with Hexagonal Superlock* Pattern Set in *(force is exerted on the face of the socket and not the corners thus the socket Cantilever can turn metric/imperial & even worn nuts) Tool Box • ¼” & 62 Piece Tool Set in ½” Drive • Chrome Cantilever Tool Box Vanadium R3495 TTOOLB / 085 TTOOLB / 062 12.5mm (½”) Drive: R1195 • 18 Sockets: 10 - 32mm TTOOLB / 086 • 18 Spanners: 6 - 24mm • Allen Keys, 6 Piece Screwdriver, 86 Piece Tool Set in 3 Piece Plier Set, Ratchet, Cantilever Tool Box 3 Extension and Power Bars, etc. • /8” Drive • Chrome Vanadium R1495 TSOCKE / 082 R995 82 Piece TTOOLB / 077 Superlock 77 Piece Tool Set in Chrome Cantilever Tool Box 3 • /8” Drive Vanadium 6mm TSOCKE / 026 (¼”) & 12.5mm R395 (½”) Drive 26 Piece 6mm (¼”) Drive Socket Socket, Bit & Wrench Set Spanner Set • 13 Sockets: 4 - 14mm

R795 TTOOLB / 078 78 Piece D.I.Y. Tool Set • ¼” & ½” Drive

90 Piece Tool Box Kit R765 TSOCKE / 048 TSOCKE / 024 3 R895 48 Piece 6mm (¼”) & 10mm ( /8”) 24 Piece Hardened Chrome Vanadium Drive Socket/Bit Set R2295 Superlock Metric/Imperial Hexagonal Contains: TTOOLB / 090 Socket Set • 12.5mm (½”) Drive • 6mm (¼”) Drive: 9 Sockets Chrome Vanadium • 18 Metric Sockets: 10 - 32mm • 10mm ( ”) Drive: 9 Sockets ¼” & ½” Drive • ½” Drive: 14, 15, ⅜ Multi 16, 17, 18, 19, 20, Lock-Multi 21, 22, 24, 27, Spline 30, 32mm • ¼” Drive: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12mm

R1595 TSOCKE / 045 3 TSOCKE / 042 45 Piece Superlock 10mm ( /8”) & R1095 12.5mm (½”) Drive Socket Wrench Set 42 Piece Hexa 12.5mm (½”) Drive 24 Piece Socket Set 3 • 14 piece 10mm ( /8”) Superlock Sockets: Socket & Bit Set 6 - 19mm • 20 piece 12.5mm (½”) Superlock • 17 Metric Sockets: 10 - 22, 24, 27, Sockets: 10 - 32mm 30, 32mm Power Bars TTOOLK / 122 TSOCKE / 023 R1995 (¾”) 19mm • Length: 600mm (½”) 12.5mm • Length: 450mm R795 122 Piece Tool Kit TPOWEB / 600 TPOWEB / 450 • Chrome Vanadium in Aluminium Case R395 R195 • ½” Drive: 10 - 32mm • ¼” & ½” Drive

0861 ADENDO / 0861 23 36 36 E&OE 23 HAND TOOLS Torx & Hex Bit Sets Professional Torque Wrench

R295 TTORXB / 009 10mm ( ”) Drive 6 - 30Nm (L = 290mm) R665 TWRENT / 002 9 Piece • T20 – T60 12.5mm (½”) Drive 40 - 210Nm (L = 530mm) • ½” Drive Torx Bit “Long” 100mm ⅜ R865 TWRENT / 003 19mm (¾”) Drive 100 - 500Nm (L = 1 945mm) R1945 TWRENT / 004 TTORXB / 042 12.5mm (½”) Drive 65 - 335Nm (L = 520mm) R325 R1395 TWRENT / 006 41 Piece 19mm (¾”) Drive 200 - 1 000Nm (L = 1 150mm) R6895 TWRENT / 007 D.I.Y. Click Torque 28Nm - 210Nm Wrench (½”) Drive R395 TWRENT / 001 R250 TTORXB / 010 10 Piece Spline Bit Socket Set (12 Point) 1 Digital Multimeters • 3 Pieces /4” Drive: M4, 5, 6 3 5 • 5 Pieces /8” Drive: M8, 9, 10, 2 4 TTORXB / 041 1 3 Tape R695 12, 14 1 Measures 41 Piece • 13-Star L Key • 2 Pieces /4” Drive: M16, 18 • 12-Star Socket • 13-Star Bit 3m R35 • 3-Bit Holder in Metal Case 5m R40 10m R70 • Quality Chrome Molybdenum 8m R60 100m R275 R595 1 Model 830 (D.I.Y.) R60 TKEYSA / 014 2 Model 850 R125 3 Model 266 with Clamp Meter R145 R345 TKEYSA / 007 4 Model 920 R175 8 Piece ½” Drive Hex Bit 14 Piece ½” Drive Metric 2 5 Model 618 Professional TTERML / 360 Set (S Steel) & SAE Hex Bit Socket Set R795 R295 • Sizes: 6, 7, 8, 10, 12, 14, • Sizes: 6, 8, 10, 12, 14, 17, 19mm 360 Piece Heavy Duty 1 5 3 1 9 5 3 17, 19mm • /4”, /16”, /8”, /2”, /16”, /8”, /4” S2 Steel Screwdriver Sets Terminal Set Allen Keys Why S2 Steel: It is the hardest, most ductile, and longest wearing steel that exists in the “Hex” Tool Industry. 10 Piece Chrome Vanadium Hex Key with Ball Joint for R60 1 24 Piece R365 hard to reach places (shown) TKEYSA / 010 TSCREW / 024 25 Piece, Metric & Imperial, 2 R65 8 Piece R245 TWASHC / 580 in plastic pouch TSCREW / 008 1 R495 TKEYSA / 025 580 Piece Copper 3 12 Piece R375 18 Piece Hex & Torx Star R120 Go-Thru TSCREW / 014 Washer Assortment Set Key Set TKEYSA / 018 3 Piece Plier Set TOP Large Selection of Top Quality Hand QUALITY Tools Available 2 3 TOP QUALITY

R195 TPLIER / 003 R125 TSCREE / 007 R245 TSCREW / 011 7 Piece Screwdriver Set 10 Piece All Purpose Set Universal O-ring Kits with Bolsters (CRV) 404 Piece Metric R145 (shown) TRINGS / 419 TSCREW / 006 R75 406 Piece Imperial R155 R155 TSCREW / 042 Chrome Vanadium Hardened TRINGS / 406 42 Piece Chrome Vanadium 6 Piece Top Quality Set 225 Piece Metric R60 Screwdriver Set TRINGS / 225

24 E&OE www.adendorff.co.za Chain Saws TOP CONSTRUCTION & PLUMBING QUALITY PETROL Hydraulic Pipe Groover Plumbers Drain Cleaners Roll Groover forms Rolled Model Grooves. Ideal for Steel & R12995 HEA 200 Stainless Steel Tubing VY (shown) TDRAIN / 201 DUTY (Manual 1¼ – 6 45cc 62cc ” ” Feed/Push) R13795 Electric Multi R2495 R3995 GPIPEG / 150 Function Pipe MSAWCH / 045 MSAWCH / 062 Threading Machine with Dies Brush Cutters 2½”– 12” ½” - 2” R18595 GPIPEG / 300 R9495 GPIPTH / 003 68cc 4” SEE WEBSITE FOR DETAILED R14995 GPIPTH / 007 R2595 SPECIFICATIONS MBRUSH / 068 43cc Pipe Chain Vices Smaller model available: Ideal for Kitchen/Sink Drains, R1695 R3695 Hotel Industry MBRUSH / 043 EVICES / 003 Pipe Threader • Capacity: ½” - 2” Tri Stand Type Model 75 (shown) R7650 GPIPTH / 001 TDRAIN / 075 Power Trowel Float Bench Type R985 • Capacity: 1/8” (3.2mm) - 4” (100mm) Drain Cleaning Rods R1295 EVICES / 004 HEAVY R13995 DUTY MPOWER / 001 1 • Ø = 1 000mm 3 • 5.5hp Petrol Engine 14 Piece Plumbers Set R1395 • 10 x 1m x 6mm XRODRN / 001 10 Piece Chrome Vanadium 4 Hex Key with Ball Joint for R60 R5495 MVIBRA / 001 14 Piece Light Duty Plumbers TKEYSA / 010 R1675 hard to reach places (shown) Drive Unit Set • 10 x 2m x 6mm XRODRN / 003 25 Piece, Metric & Imperial, with Female R65 Scaffolding 14 Piece • 10 x 2m x 8mm R2645 in plastic pouch TKEYSA / 025 Coupling for XRODRN / 002 18 Piece Hex & Torx Star R120 Vibrating Key Set TKEYSA / 018 Poker 5 Tampering Rammer

6 2 OPTIONAL EXTRA R27995 1 Tubular Frame MRAMMR / 004 Vibrating Pokers 1.5m x 1m Panel R450 TSCAFO / 001 • Petrol Driven • 4 Stroke 38mm 50mm 2 Caster R325 TSCAFO / 002 • 4hp • Tank Capacity: 3l 3 R1495 R1595 Cross Brace TSCAFO / 003 • Impact Force: 16kn R195 • Shoe Size: L = 350mm, W = 280mm MVIBRA / 003 MVIBRA / 002 4 Board R475 TSCAFO / 004 • Weight: 82kg 5 Tiebar R180 TSCAFO / 005 6 Leveling Jack R375 TSCAFO / 007 PETROL

Plate Compactors Rammers & Plate R20995 HS090 (shown) MRAMMR / 003 Compactors • 5.5hp Petrol Engine R12750 • Petrol Driven Available • Plate Size: 570 x 450mm PETROL MCOMPT / 090 • 4 Stroke • Weight: 90kg NEW • 3.5hp • Tank Capacity: 3l R13250 MCOMPT / 120 • Impact Force: 14kn HS120 • 5.5hp Petrol Engine • Shoe Size: L = 350mm, • Plate Size: 480 x 660mm W = 280mm ENQUIRE • Weight: 70kg IN-STORE • Weight: 120kg

0861 ADENDO / 0861 23 36 36 E&OE 25 CONSTRUCTION Diesel Engines

Log Saws ELECTRIC PETROL DIESEL

220V LS 710 (shown) LS 700 Motor 2.2kW 13hp 13hp 500 x 30 700 x 30 700 x 30 DIESEL Blade x 2.5mm x 3.0mm x 3mm Max. Cutting Ø 140mm 240mm 240mm Max. Cutting Length 2m 2m 2m R5695 R13495 R19995 WLOGSW / 500 WLOGSW / 701 WLOGSW / 703 WATER COOLED 5.8kW (shown) R13995 Log Splitters Measuring Wheels • OML-8hp • Class B1 MENGIN / 001 8.8kW R19495 Professional • OML-12hp • Class B1 MENGIN / 002 (large) R795 R7495 WLOGSP / 006 (shown) HWHEEL / 001 AIR COOLED 6 Ton Electric & Hydraulic (shown) Professional (small) 4.7kW (ideal for indoors) R695 R10895 • Vertical Type HWHEEL / 002 • OMA-6.5hp • Class B1 MENGIN / 003 • Motor: 3kW, 4hp, 220V Small (digital) R445 7.3kW • Max. Splitting Force: 6 Tons (shown) HWHEEL / 004 R16495 • OMA-10hp • Class B1 MENGIN / 004 • Max. Log Splitting Length: 600mm Large R465 (318mm Wheel Ø) HWHEEL / 005 OPTIONAL EXTRA R3995 Drive Pulley for Air Cooled Models R3050 WLOGSP / 007 R295 Tarpaulins 6 Ton TBARWR / 005 Electric/Hydraulic • Motor: 1.5kW, 3hp, 220V 5 Piece Hammer • Max. Splitting Force: 6 Tons & Chisel Set • Max. Log Splitting Length: 520mm Heavy Tile Cutters Weight 14 x 14 R2495 400mm, 3-in-1 mesh WLOGSP / 018 R375 TTILEC / 301 10 Ton Hydraulic (Manual) • Ram Stroke: 212mm • Max. Log Length: 450mm 630mm (shown) ± 2 x 4m • Max. Log Splitting Length: 430mm R125 TTARPL / 204 R895 TTILEC / 630 ± 3 x 5m R225 TTARPL / 305 ± 5 x 6m R22950 R435 TTARPL / 506 WLOGSP / 032 ± 5 x 6m Duty Building Hammers With Rubber Light R170 TTARPL / 507 36 Ton on Wheels Handle Grip • Motor: 10hp PVC 5 x 6m R1495 TTARPL / 156 • Max. Log Splitting 8lbs, 3.6kg R365 THAMMR / 306

Length: 450 x 610mm 14lbs, 6.3kg THAMMR / 603 550gsm PETROL R495 Duty Heavy PVC 3 x 5m R695 TTARPL / 135

Spotlights 1 Lithium Ion Rechargeable with 10 Piece LED Worklight R255 HLIGHT / 010 2 2 Aluminium Rechargeable • 2 Million Candle Power R295 HLIGHS / 036 TOP 1 3 Rechargeable Adjustable 180 Piece LED Worklight QUALITY • Lithium Ion Battery • Low Heat R745 HLIGHS / 181 • 6 - 8 Hour Capacity

4 27W LED (12V) Worklight (square) 60° • Flood Beam with R345 TLIGHW / 001 R495 4 Mounting Bracket 3 HLIGHC / 001 5 52 Piece LED Rechargeable Worklight & Torch R395 TLIGHW / 061 5 Portable 6 Rechargeable LED Flashlight • Lithium Ion Battery • 650 Lumins Floodlight, 2 x 500W • Lifetime of LED Bulbs 100 000 HLIGHT / 009 Globes, 220V R195 • Adjustable Height: 6 hours • Super Bright • Power & Energy Saving Max. 1.8m

26 E&OE www.adendorff.co.za CONSTRUCTION Water Pumps For Clean Water Auger PETROL PETROL CONTRACTORS CHOICE DRIVEN 50mm 75mm 100mm 1 1 68cc 2 Stroke Earth Motor 5.5hp 6.7hp 9hp Auger Drive Unit Only Head 26m 22m 20m (shown) Suction Height 7m 7m 7m Capacity 22 000l/h 50 000l/h 75 000l/h MAUGER / 002 R2695 R2995 R3295 R5995 MPUMPS / 552 MPUMPS / 553 MPUMPS / 804 2 150mm Auger Bit (shown) DIESEL DRIVEN MAUGER / 150 2 50mm 75mm 100mm R375 Motor 2.8kW 4kW 7.4kW Head 25m 25m 31m 2 200mm Auger Bit Suction Height 8m 8m 8m MAUGER / 200 Rated Speed 3 600rpm 3 600rpm 3 600rpm R395 Tank Capacity 2.5l 3.5l 5.5l Capacity 25 000l/h 50 000l/h 96 000l/h 7hp Trench Digger ALSO AVAILABLE R8895 R9795 R10995 Suction and Layflat Hose MPUMPS / 007 MPUMPS / 008 MPUMPS / 009 MTREND / 001 R29950 3” (75mm) Dirty Water Pump (shown) • Motor: 5.5hp • Head: 25m • Suction Height: 6m R5295 MPUMPS / 006 PETROL • Max. Capacity: 45 000l/h • Recoil Start High Pressure Water Pump (Ideal for Fire Fighting) R3995 MPUMPS / 005 50mm Petrol Water Pump for Chemical • 7hp • 4 Stroke • Trench Width: 100mm Purposes • Motor: 5.5hp R4295 • Trench Depth: 150/250/340/450mm • Head: 25m • Suction Height: 8m • Average speed of Trench Digger: 60m/h MPUMPS / 550 PETROL • Max. Capacity: 49 000l/h • Recoil Start ELECTRIC START High Pressure Cleaners Dumpy Level Concrete Mixers

1

2

MAC AFRIC 206 bar (shown) • 9hp PETROL R10495 • 4 Stroke • 10m Hose HCLEAN / 299 & Nozzles • Recoil Start R3895 TLEVEL / 320 MAC AFRIC 186 bar 135l (shown) 1 R2995 MMIXER / 135 Household • 6.7hp With Automatic ELECTRIC • Motor: 0.55kW PETROL R8295 • 4 Stroke • 10m Hose HCLEAN / 201 Leveling Function 210l • Motor: 1kW R6495 MMIXER / 210 & Nozzles • Recoil Start incl. Tripod and MAC AFRIC (D.I.Y.) 5m Staff 350l (shown) 124 bar • 5.5hp 2 PETROL • 6.5hp • 4 Stroke PETROL R6895 MMIXER / 350 • 4 Stroke • 10m Hose HCLEAN / 220 ALSO AVAILABLE • Weight: 328kg R17995 & Nozzles • Recoil Start Staff or Tripod • Capacity: 254l Volume 160 • 3hp MAC AFRIC 248 bar R645 EACH l R5495 MMIXER / 161 • 9hp PETROL DIESEL R16995 500l • 8hp MMIXER / 500 • 10m Hose & Nozzles HCLEAN / 360 R23995 • Electric & Recoil Start DIESEL 500l • 6.3hp R26995 MMIXER / 501

0861 ADENDO / 0861 23 36 36 E&OE 27 GARAGE EQUIPMENT Pneumatic Pump Grease Pumps 12V Diesel Pump HPUMPO / 004 2 HPUMPO / 008 R9495 R2495 Pneumatic Mobile Oil R1495 Complete Unit (shown) Dispensing Kit (without drum) GGREAS / 008 • 40 /min • Includes Pump, Gun, l (complete unit shown) Hose, Meter and Bracket 12l Foot Operated • Ratio 5:1 • Trolley, Pump, 1 Hose Reel & Digital Oil Gun with 4m Hose & Gun 3

2 Pneumatic Oil Dispensing Pump (only) • Ratio 5:1 R2995 HPUMPO / 003 3 2 3 Digital Oil Gun (only) R995 GGREAS / 002 • Flow Rate: 0-60l/min Drum for illustrative 15kg High Pressure R1895 HPUMPO / 005 purposes only with Trolley, Drum, Gun & Hose (manualy operated) ALSO AVAILABLE R1695 Pneumatic Grease Drums 1 Pump 2 Hose 3 Gun Kit HPUMPO / 007 Includes Hose, Gun & Trolley R1695 12l Grease Pump 220V Models Also Available. ENQUIRE IN-STORE (shown) GGREAS / 001 • Inlet Pressure: R2695 High Pressure 6 - 8 bar GGREAS / 012 Grease Lid R295 with Hose & Gun 30l Grease Pump HPUMPO / 002 • Inlet Pressure: R3795 (Fits certain drums only) 6 - 8 bar GGREAS / 005 ALSO AVAILABLE 40l 15kg Multi Purpose Grease 12V Mini Oil • Inlet Pressure: 4 - 8 bar R4295 Extractor Pump GGREAS / 017 R1095 GGREAS / 015 • PVC Clear Pipe included

Grease Guns Drum Pumps Auto Retractable Hose Reels Colour may vary

(shown) SUITABLE FOR GREASE SUITABLE FOR OIL R265 TPUMPD / 001 Fits into a 210l Drum, 15m to pump Oil and Paraffin 10m 400cc R180 GGREAS / 400 500cc R185 GGREAS / 501 R2795 R3895 TPUMPH / 001 GHOSEO / 001 600cc R195 GGREAS / 600 R475 GHOSEG / 010 Aluminium Hand Rotary Pump TOP QUALITY 15l Oil Drain Supply SUITABLE FOR AIR R695 TPUMPD / 002 GOILCN / 002 NEW R195 PPS Type (Poly Phenylene Sulphide, composite) Polypropylene rotary pump is excellent for most organic acids, waxes, 2 plating solutions, detergents and water 3 4 soluble organic chemicals 1

1 20m (10mm fittings) R2095 GHOSER / 020 12V D.C. Oil Transfer Pump 2 15m (10mm fittings) GHOSER / 016 80l Oil Drain Tank (Plastic) R1995 • Fits 210l Drum R675 3 15m (8mm fittings) R995 GHOSER / 015 • Length of Shaft: HPUMPO / 001 R1595 360mm GOILCN / 001 • Ø of Drum: 4 8m (10mm fittings) R995 GHOSER / 008 • Adjustable Height 300mm • Max. Height: 1.8m • Min. Depth of (10mm) ” Air Couplers Drum: 345mm • Female R45⅜ • Male R45

28 E&OE www.adendorff.co.za Bottle Jacks GARAGE EQUIPMENT Garage Jacks R575 GJACKT / 001 TOP Model 2 250 H-D (D.I.Y.) (shown) QUALITY • Lifting Height Capacity: 135 - 385mm Model 2 250 L-D (D.I.Y.) Model Min. Height Max. Height Price R325 GJACKT / 000 2 000 158mm 308mm R145 GJACKB / 002 5 000 200mm 405mm GJACKB / 005 R265 GJACKT / 300 10 000 240mm 480mm HEAVY R2395 R395 GJACKB / 010 Model 3 000 Short Wheel 250mm 490mm DUTY 20 000 R625 GJACKB / 020 Base Low Level (shown) 30 000 285mm 475mm R895 GJACKB / 030 • Lifting Height Capacity: 103 - 430mm 50 000 285mm 480mm R1395 GJACKB / 050

GJACKT / 002 Hydraulic Transmission Jacks HEAVY R1395 Model 500 Telescopic DUTY Model 2 500 Short Wheel • Height Range: Base Low Level (shown) R4995 GJACKT / 102 870 - 1 847mm • Lifting Height Capacity: 120 - 500mm Model 1 000 Low Level Aluminium Trolley Jacks Low Level R3595 (shown) GJACKT / 100 Model 2 000 Model 1 500 (shown) • Length: 760mm • Width: 430mm R3495 R2295 • Height: 215mm GJACKT / 402 GJACKT / 415 • Extended: 625mm • Lifting Height: 775mm Model 2 000 Low Level R8795 GJACKT / 101 Long Reach Trolley Jacks (shown) Model 3 000 Model 5 000 Model 10 000 Model 20 000 12V Car Scissor Jacks Lifting Capacity 600mm 685mm 700mm 640mm Length of Jack 1 290mm 1 410mm 1 560mm 1 420mm Model 1 000 R995 GJACKC / 003 R4895 R6895 R10995 R15495 Lifting Height Capacity: 12 - 35cm GJACKT / 003 GJACKT / 005 GJACKT / 010 GJACKT / 020 Model 2 000 R1295 GJACKC / 004 Engine Cranes Lifting Height Capacity: 14 - 43cm Connects to Cigarette Lighter or Battery Model 2000 GCRANE / 002 Car Positioning Hydraulic Jack R2695 (Attachments Included) Mobile Hydraulic Adjustable (shown) ALSO AVAILABLE 600kg Extra Heavy Duty Construction Load Type, Model 2 000 for Trucks Capacity: Leveller 650kg 1.5 Ton Gantry Crane R7695 GCRANE / 005 (shown) per Jack R325 R8950 GCRANE / 000 • Adjustable • Mobile R2995 PER PAIR • Height Adjustment: GJACKT / 150 2.1 - 3.3m Model 2 000 Hydraulic (shown) R2995 (Foldable with 6 Wheels) GCRANE / 004

Wheel for Model 2 000 with Hydraulic illustrative & Pneumatic Functions R3695 purposes only GCRANE / 003

0861 ADENDO / 0861 23 36 36 E&OE 29 Automotive Tool Sets

NEW R395 NEW NEW R345 GINJEC / 007 GBRAKE / 018 Diesel Injector Seat Cutter Set C.V. Joint Hand Held R295 Assembly GVACUM / 001 • Used to clean/decarbonise injector seats. Vacuum Pump Suitable for a wide range of vehicles. Removal R295 • Suitable for wide range of vehicles • Set of 5 Cutters Tool GJOINT / 002

18 Piece Brake Caliper Wind NEW NEW NEW Back Tool Set • Winds Back Brake Piston for R445 replacing Brake Pads 11 Piece GSOCKE / 007 • Prevents damage to the Piston Clutch Oxygen Sensor/ & Boot R395 GOILPT / 001 Alignment Sending Unit Socket Set 12 Piece Oil Pressure Adjustment Tool R695 • Used for the removal or replacement of GCLUTA / 001 heated and non-heated oxygen sensors. PETROL Tester Set Set Cut away sections allows Socket to fit Compression easily over. Tester NEW R1395 NEW GTESTD / 001 R195 GCOMPT / 001 R225 Diesel Fuel Pressure R265 GVALVC / 001 Injector Tester Tester Set GFUELT / 001 Valve Spring Compressor Set DIESEL (Pipe Frame) R1595 GTESTR / 001 Radiator/Water Tank R695 Leak/Pressure Detector GOILFR / 002 Set • Test Cooling Love your Tools 23 Piece Oil Systems for Leaks The right tool Filter Wrench for the job Compression • Includes Hand Kit R1595 Pump and HEAVY Tester Kit GCOMPT / 002 Test Head

Hydraulic Hand Stacker Hand Pallet Truck (shown) 2 Ton 2.5 Ton 2 Ton 2 Ton (Low Level) Outer Width of Fork 685mm 685mm 510.5mm 665mm Inner Width of Fork 360mm 375mm 200.5mm 340mm Fork Length 1 200mm 1 200mm 1 000mm 1 210 x 650mm Height 80-200mm 80-200mm 80-200mm 52-150mm R9950 GPALLT / 003 R3695 R2995 R3395 R4295 • Capacity: 1 000kg GPALLT / 002 GPALLT / 000 GPALLT / 005 GPALLT / 001 • Height: 1.6m • Sturdy Construction

Hydraulic Lifting Table Toe Jack 500kg (shown) 250kg 1 NEW Double Scissors Single Scissors 2 Ton (shown) 5 Ton Table 1 010 x 520mm 800 x 500mm Lift Range of Table Height 430 - 1 000mm 335 - 915mm 17 - 132mm 25 - 205mm Claw Stroke 570mm 580mm Lift Range of 235 - 350mm 369 - 573mm Weight 118kg 78kg Head 1 INDUSTRIAL R8495 R5995 TYPE R1595 R3995 GPALLT / 008 GPALLT / 007 GJACTT / 002 GJACTT / 005

30 E&OE www.adendorff.co.za GARAGE EQUIPMENT Parts Washers USE WATER-BASED Chain Blocks SOLVENTS R1895 R2595 ONLY GWASHP / 090 GWASHP / 091 1 90l Compact (shown) 90l Compact on • Stationary Trolley (shown) 1 Triangle VC Type • Includes Pump • Includes Pump with 3m Lift • 760 x 520 x 890mm • 750 x 530 x 900mm Model 1 000 R1295 HEAVY GCHAIN / 101 GWASHP / 180 Model 2 000 R1495 R2995 DUTY GCHAIN / 102 180l • Stationary • Includes Pump • 1 100 x 550 x 900mm Model 5 000 R2895 • Suitable for cleaning larger parts GCHAIN / 105 2 2 With 3m Lift Garage Creepers Webbing Slings Model 1 000 R795 Tools for 2 Ton x 1.5m GCHAIN / 001 Roller Seat with illustrative R295 purposes Model 2 000 bottom Tool Tray only R995 GCREEP / 002 GCHAIN / 002 R85 Model 5 000 R2295 R395 GSLING / 002 GCHAIN / 005 3 GCREEP / 001 3 Lever Blocks with 1.5m Lift Padded Mechanics Creeper Model 1 000 R995 5 Ton x 4m GCHALB / 001 GSLING / 005 Model 2 000 R1395 R475 R475 GCHALB / 002 GCREEP / 003 Model 5 000 R2295 Plastic Creeper Love your Tools GCHALB / 005 • Low Profile • Moulded one piece The right tool for the job 1 R795 NEW HEAVY GCREEP / 005 220V Builders Hoists DUTY 48" Plastic Creeper High Speed 2 Ton Crawl 250kg with 1 2 Capacity 250kg Wireless Remote Lifting Speed 19m/min 19m/min GCRAWL / 001 R1495 Duty Cycle: 1 R8995 R9995 Geared with Chain (shown) BEAM FOR 25% GHOIST / 125 GHOIST / 126 I-Beam Size: 100 - 150mm ILLUSTRATIVE PURPOSES ONLY OPTIONAL EXTRA Manual Type Hoist Remote Control with 30m Cable R1295 GHOIST / 127 I-Beam Size: 80 - 150mm 1 R1095 OPTIONAL EXTRA GCRAWL / 002 1 2 1 Ton Manual Crawl for Electric Hoist R1495 GCRAWL / 000 2 Universal Crawl Mounting Bracket R145 GHOIST / 001 • For Models: PA250, PA400 & PA1 000

Electric Chain Hoist 220V Electric Hoists (Double Chain) Capacity 1T x 6m 1T x 6m 2T x 6m PA250, PA400, PA600, PA1000, Voltage/Motor 220V - 0.65kW 380V - 1.1kW 380V - 1.5kW 250kg 400kg 600kg 500kg Lifting Speed 6.8m/min 3.6m/min 3.4m/min Capacity Double Line 250kg/5.5m 400kg/5.5m 600kg/5.5m 1 000kg/5.5m Capacity Single Line 125kg/11m 200kg/11m 300kg/11m 500kg/11m R11450 R10450 R11950 GHOIST / 100 GHOIST / 101 GHOIST / 102 I-BEAM FOR ILLUSTRATIVE R1695 R2195 R2595 R5595 1 (shown) 2 (shown) PURPOSES ONLY GHOIST / 250 GHOIST / 400 GHOIST / 601 GHOIST / 500

0861 ADENDO / 0861 23 36 36 E&OE 31 GARAGE EQUIPMENT Panelbeating Kits Hydraulic Body Repair Kit TOP QUALITY Heavy Duty with all attachments 10 Ton (shown) WITH NEW 9 Piece INPROVED SEALS R1995 GBODYR / 010 15 Ton R3695 GBODYR / 015 7 Piece 20 Ton R5895 GBODYR / 020 R395 GPANEL / 001 R1495 GPANEL / 009 Professional Pry Bar Kits R2995 GBODYR / 007 7 Piece Hydraulic Tie Bar Tool Kit • Pump not included

13 Piece (shown) 7 Piece R1695 GBODYB / 013 R995 GBODYB / 007 Small & Box Mouth Pull Clamps 1 R595 5 Ton NEW 1 R375 GSTAND / 020 Box Clamp GCLAMP / 003 Super Sturdy R1495 3 Ton 2 R265 Portable Foldable GPANFR / 001 Box Clamp GCLAMP / 002 2 Work Paint Stand Wheel Arch Fender Roller • Flares Arches 5 Ton • Repair Arch Damage • Bolts directly to Hub 3 R345 • With rubber protection Small Mouth GCLAMP / 001 Flange • Adjustable 3

Ratchet Tie Downs Slide Hammer & Dent Puller Kits

GHAMSL / 013 TTIEDN / 002 R775 HEAVY R395 13 Piece DUTY 14 Piece 50mm x 9m, Heavy Duty R225 (shown) Professional Orange (shown) • Quick Automatic Release GPANEL / 011 R1195 • Breaking Strain: 4 500kg 11 Piece Trim GHAMSL / 014 • Heat Treated Hooks Removal Tool Set

ALSO AVAILABLE Double Ratchet Pullers R225 TTIEDN / 006 50mm x 9m • Cable Length: 3m Handy for Securing 4 Piece Set Heavy Duty (White) • With Rubber Grip Handles Loads on Trucks, • 4.6m x 25mm Erecting Fences, • Breaking Strain: 550kg R140 Pulling Boats, • Work Load Limit: 275kg TTIEDN / 050 Construction, etc. 4 Ton 2 Ton Coil Spring Compressors R365 TPULLR / 004 R225 TPULLR / 002 750kg (shown) R1995 GCOILS / 001 10 Ton Frame Straightner 1 Ton R2295 GCOILS / 010 HYDRAULIC R2495 GCOILS / 011 R12695 GSTRGT / 001 Manual Strut (shown) • Max. Height: 500mm (20”) With Anchor Post for added Flexibility, • Max. Diameter: 200mm (8”) includes Accessories as shown

32 E&OE www.adendorff.co.za GARAGE EQUIPMENT Ratchet Type Jack Stands

3 Ton Capacity for Wheel Balancers R275 PER PAIR Cars (shown) GSTAND / 003 6 Ton Capacity for R495 PER PAIR LDV’s & Trucks GSTAND / 006 12 Ton Capacity for Wheel for For Calibration R1345 PER PAIR illustrative Instructions see Trucks GSTAND / 012 purposes only

Engine Stands SEE WEBSITE FOR DETAILED Adjustable Arms to fit all SPECIFICATIONS Popular Car & LDV Engines (shown) CB530 CB800 Model 900 Extra Heavy Duty with Geared Rotator Motor Power 220V 220V (4, 6 & 8 Cylinder Engines) (shown) R3895 GSTAND / 100 Rim Width 40 - 310mm 40 - 510mm Rim Ø 254 - 508mm 265 - 615mm Model 450 Universal (4 & 6 Cylinder Engines) GSTAND / 450 R695 Balancing Speed 210rpm 200rpm Model 550 Universal with Oil Pan & Parts Tray Rim Accuracy 1G 1G (4 & 6 Cylinder Engines) R1695 GSTAND / 550 Model 900 Heavy Duty (4, 6 & 8 Cylinder Engines) R14995 R19495 R1795 GSTAND / 500 GTYREB / 001 GTYREB / 002 500kg Engine Support R1195 Truck Tyre Changer SPECIAL GTYREV / 001 R59500 Wheel for Vulcanizing Machine illustrative GTYREC / 004 purposes • Vulcanizing Temp: only GSTAND / 501 145 - 165 °C R945 • Easy & Accurate Clamping • Seamless Finish Truck Wheel Nut Removers Wheel Spanner Sockets with 600mm Handle not included • Application Range: Truck/Bus/Tractor/Industrial Vehicle 27 x 32mm R225 GSPANW / 027 • Model: LT690 • Max. Wheel Weight: 1 600kg • Max. Wheel Width: 1 065mm • Max. Outer Ø of Tyre: 2 300mm 32 x 33mm R225 GSPANW / 032 • Clamping Range: 355 - 1 422mm 30 x 32mm R225 GSPANW / 030 • Driving Power of Hydraulic Pump: 1.1kW, 380V, 3hp • Driving Power of Gear Motor: 2.2kW, 380V, 3hp • Min. Inner Ø of Rim: 130 - 1 045mm 1” Drive (Remove Truck Wheel Nuts Car • Max. Sliding Distance of Mount/Demount Arm: 1 703mm with Ease) Ramps Available ex-Johannesburg South warehouse 3 800Nm Torque Output: 1:60 Weight Capacity: R545 GWRENC / 280 1 136kg per pair 3 800Nm Torque Output: 1:60 R1095 GRAMPS / 002 R110 GLEVER / 024 600mm (24") Tyre Lever R775 GWRENC / 520 Wheel Chocks OPTIONAL EXTRA R185 PER PAIR 1” Drive Sockets (see page 15) GSTAND / 204 TOP QUALITY Heavy Duty Tyre Repair Kit Pneumatic Tyre Changers Wheel for illustrative Compressor required purposes only (shown) LT 950A With F 112 LT 910 Helping Arm Motor 1.1kW, 220V 1.1kW, 220V 1.1kW, 220V R275 Internal Clamp 12” - 22” 14” - 26” 14” - 26” GTYRER / 001 Max. Wheel Ø 1 000mm 1 100mm 1 100mm Max. Wheel Width 270mm 381mm 381mm • Heavy Duty T-handle Reamer • Heavy Duty T-handle Insert/Spiral Probe Tool R14995 R22995 R27495 • Ideal for Vehicles & Motorcycles GTYREC / 002 GTYREC / 005 GTYREC / 006

0861 ADENDO / 0861 23 36 36 E&OE 33 GARAGE EQUIPMENT

Gear Pullers Hydraulic 10 Ton (shown) 20 Ton HYDRAULIC Crank Type 10 Ton Heavy Duty Crimping Tool Rated Output 10T 10T 20T Sets Reach 160mm 135mm 350mm 8 Ton (shown) 13 Ton Max. Stroke 60mm 170mm 100mm Max. Stroke 12mm 18mm Spread 250mm 250mm 560mm 16, 25, 35, 50, 70, 6, 10, 16, 25, Dies 95, 120, 150, 185, R1445 R2295 R4995 35, 50, 70mm2 GPULLE / 011 GPULLE / 010 GPULLE / 020 240, 300mm2 Crimping Range 6 - 70mm2 10 - 300mm2 Combination 2/3 Jaw MANUAL R795 R995 75mm R60 TPULLG / 075 ECRIMP / 001 ECRIMP / 002 100mm R115 TPULLG / 100 Portable Inspection Camera/Bore Scope 150mm R195 TPULLG / 150 • Suitable for many applications • Flexible Tube 2.4" Colour LCD Monitor R895 NEW GPULLE / 004 R1495 GSCOPE / 001 NEW Diesel Injector 3.5" Colour LCD Monitor Puller Kit R2995 GSCOPE / 002 (shown) • With Slide Hammer • Ideal for the removal GPULLE / 002 of stuck and seized common Rail Injectors R425 without dismounting the Cilinder Head Universal Adjustable Camshaft & Bearing Seperator Kit Crankshaft Pulley Holder R695 TBEARS / 001 TTEMPT / 001 • Range: 30 - 95mm R895 R495 • Length of Jaws: 110mm GHCOIL / 131 Infrared Thermometer (2 Jaw Puller) with Digital Readout • Max. Shaft Length: 210mm 131 Piece Helicoil Thread Repair Kit • From –50 - +530° Accurate Measurement • Distance to Spot Size: 8:1 Sand Blast Gun and Cabinet SANDBLASTING • Ideal to measure Heat Sources R1995 GCABSB / 001 Sand Blast Guns Sand Blast Pot • Complete with High Efficiency • Range of Blasting Pressure: Gun, Light, Pickup Hose, 420kPa - 900kPa (4.2 - 9 bar) Gloves, Spare Glass R170 • Nozzle Sizes: Ø 2.4, 2.7, 3.2, 3.6mm Shields and Nozzles AGUNSB / 003 45l (shown) 90l • 580 x 490 x 490mm Sand Blast R1595 R1995 Gun with 4 Ceramic Nozzles GPOTSB / 045 GPOTSB / 090 R195 AGUNSB / 000 Sand Blast Pot Gun with 4 Nozzles R5395 GPOTSB / 001 R4995 90l “Dust Free” Sand GCABSB / 002 Blasting Unit complete Vertical Type R185 with 1 200W, 220V, • Heavy Duty Steel AGUNSB / 001 Vacuum, Hose and Gun Construction Suction Feed • Complete with High • 8cfm • Ideal for Efficiency Gun, Hose, General Sand Sandblasting Light, Gloves, etc. • 890 x 570 x 1 390mm Compressor Required Blasting Applications Sand (Fine Grit) Sandblasting • 25kg Bag Hood • 47 - 58 Microns ALSO AVAILABLE R355 Industrial Sand Blast Cabinet AGUNSB / 118 with Foot Pedal & Extractor R15995 R75 • 1 220 x 600 x 1 710mm GCABSB / 003 Top Load/Gravity Type GCABSG / 030 R295 GCABSB / 008

34 E&OE www.adendorff.co.za GARAGE EQUIPMENT Intelligent/Digital Battery Chargers Battery Chargers/Boosters 1 Model 320 • 12V - 30 Amp R1895 GCHARG / 321 4 Amp 12V GCHARG / 013 R495 Model 400 • 12V - 45 Amp R1995 GCHARG / 400 1 4 Amp (shown) 6V & 12V R595 GCHARG / 104 Model 600 • 12V - 60 Amp R2595 GCHARG / 600 8 Amp 12V R975 GCHARG / 108 Battery for illustrative purposes only 15 Amp 12V R1095 GCHARG / 115 25 Amp (12V)/ Chargers Love your Tools 12V & 24V The right tool 12.5 Amp (24V) R2195 GCHARG / 125 8 Amp, 6/12V 15 Amp (12V)/ for the job 12V & 24V 7.5 Amp (24V) R1895 GCHARG / 126 R375 GCHARG / 008 Battery Tester Lithium Ion Battery Jump Starter 6 Amp, 12V

R285 TTESTB / 001 GSTART / 002 GCHARG / 006 R295 R895 • Range for Testing: 6 - 12V • Rechargeable • Portable • Rated Capacity: 32A to 500A • Peak Start Current: 600A (3S) • Ideal for many uses • Battery Capacity: 12 000mAh TOP • Output Voltage for Car Start: 12V • USB Output: 5V 2.1A QUALITY Hydraulic Workshop Presses • Charge Mode: 12V 1A CC/CV • Dimensions: 165 x 79 x 40mm Jump Starters 12 Ton Hydraulic R3995 Press with Gauge GPRESS / 012 Portable 12V Ideal for: (shown) Power Supply • DC output for Portable 20 Ton Hydraulic Electronics such as R4795 essential for Cellphones, Worklight Press with Gauge GPRESS / 020 Workshops • Jump starting Vehicles 20 Ton Hydraulic- • Camping Outdoor Accessories Pneumatic Press with R5495 GPRESS / 021 Peak Starting Gauge (Dual Function) Amp Hours Crank Amps Current Price

17A, 12V 900A 400A R995 GSTART / 017 12 Ton Shop Press 25A, 12V 1 200A 600A GSTART / 025 R1695 R1295 (shown) GPRESS / 009 38A, 12V 1 600A 700A GSTART / 038 R1895 Type) 20 Ton Shop Press R2795 2 x 24A, 24V 1 200A 600A R1795 GSTART / 024 (Bottle Jack GPRESS / 010

Booster Cables HEAVY DUTY

100% Copper Cables R1995 GSTART / 300 Maintenance Free Batteryless 400 Amp 450 Amp Jump Starter 300A • Requires no regular maintenance charging R195 R265 • Ready to use any time, anywhere GCABLE / 400 GCABLE / 450 • 40°C - 65°C

Floor Tiles TOP HEAVY With Gauge Black PVC Extra QUALITY DUTY Heavy Duty Interlocking (shown) • Ideal for Garages, Workshops, etc. 40 Ton Size 333 x 333mm 490 x 490mm Hydraulic- Thickness 4mm 4.5mm Pneumatic 100 Ton Sqm 9 tiles = 1m2 4 tiles = 0.96m2 Stroke 300mm 500mm Distance between H-frame 680mm 710mm R9.90 each R24 each Height of Press 1.6m 1.95m XTILES / 001 XTILES / 500 Width of Work Table 325mm 370mm SEE WEBSITE FOR DETAILED R12995 R35995 SPECIFICATIONS GPRESS / 041 GPRESR / 001

0861 ADENDO / 0861 23 36 36 E&OE 35 WINCHES TOP QUALITY

Capacity Including Fairlead Motor Weight Rolling Weight Price 3 620kg @ 6m / EWK 8 000U 12 Volt 1.6kW 31kg R4495 (shown) 2 170kg @ 29m GWINCH / 800 3 620kg @ 6m / EWG 8 000U 12 Volt 2.7kW 36kg R6295 2 170kg @ 29m GWINCH / 802 5 440kg @ 4.8m / EWX 12 000U 12 Volt 4.5kW 42kg R6895 Love your WINCH 3 125kg @ 25m GWINCH / 912 The right winch for 4 536kg @ 5.3m / the application EWX 10 000U 12 Volt 4.3kW 38kg R6495 2 571kg @ 26m GWINCH / 901 EWP 12 000U 12 Volt 5 443kg @ 4.9m / 5.4kW 44kg 2 Speed with High & Low 3 084kg @ 25.5m R8995 Gear GWINCH / 914 Hydraulic Oil Flow Pressure Capacity Price HWN 15 000YD 6 804kg 20~60l/min 13MPA R12595 Ideal for Roll Back @ 1 885.5psi GWINCH / 916 NEW GWINCH / 001 HWD 12 000A 5 443kg R3295 5~45 /min 11MPA 2 Speed ideal for l @ 1 595.4psi R11995 4x4’s GWINCH / 915 Synthetic Winch Line & Aluminium Hawse Fairlead with Carry Bag • 30m • 8 Ton

12V Air Compressor 30LPM LPM = litres HEAVY per minute DUTY R395 Capacity 160LPM GCOMPR / 002 Motor Rolling Weight Price EWK 2 000D 12 Volt 1.7kW 907kg @ 2.1m R1195 R1465 (shown) • 2 Way Control GWINCH / 200 GCOMPR / 003 Clamps onto Battery EWP 2 500D 12 Volt 1.9kW 1 134kg @ 2.1m R1750 2 Way Control GWINCH / 250 Farm Jacks Ewp 2 500A 12 Volt 1.9kW 1 134kg @ 2.1m R1750 With ATV Control GWINCH / 201 1.21m (48") • 3 000kg Capacity • Max. Height: 48” High Lift 4x4 • Min. Height: 6” Hand Gear Winch Can Lift • 2 Ton at 50% Height • 1.75 Ton at Max. Height 1 R795 1 1 360kg (shown) GJACKF / 048 • With Nylon Strap Belt R525 • Length of Strap: 7m GWINCH / 502 • 3 000kg Capacity • Max. Height: 60” 1.52m (60”) 2 1 360kg • Min. Height: 6” • With Steel Cable R495 Can Lift • 2 Ton at 50% Height • Length of Cable: 10m GWINCH / 501 R895 • 1.75 Ton at Max. Height GJACKF / 060 2 450kg (shown) • With Steel Cable R295 Nylon Base for Farm Jack GJACKF / 001 • Length of Cable: 10m GWINCH / 050 R325

Adendorff Machinery Mart Reg. No 2007/216708/23 Warranty and Guarantee. A 1 (one) year “Carry in” conditional warranty applies on all goods purchased. The warranty does not apply to defects due to negligence, wear and tear parts, misuse, abuse, accidental damage, modifications, lack of maintenance, improper wiring, unauthorized repairs, damage caused by lightning or power surges, goods used contrary to their instruction manuals and on batteries. If not fully satisfied with the product, the unused product can be returned for a full no hassle refund. The following conditions strictly apply: (a) the product must be in its original packaging (b) the product must be returned within 10 days from date of purchase (c) original invoice to accompany the product. Adendorff Machinery Mart reserves the right to charge a “packaging fee” for items not returned in their original packaging. Refunds, returns, exchange and cancellation policy is in accordance with CPA regulations. If the product is not suitable for the purposes anticipated and indicated to the salesperson, a handling fee will be applicable based on the condition of the product subject to our policy. Warranties on generators will be null and void if not installed by a qualified electrician. A factory warranty of 1 Year or 300 hours, whichever may occur first, is applicable to our large generators. 3-month warranty applicable on all repairs. Terms and Conditions. While stocks last. Subject to availability. All prices quoted are payable in ZAR’s and are inclusive of 14% VAT. Unless a specific limitation is stated, Adendorff Machinery Mart will endeavour to have sufficient advertised stock available to meet anticipated demands. Prices are reviewed on a regular basis and is subject to change without prior notification. Please contact your nearest branch or consult our website. We take great care to ensure that all advertisements are correct. If a mistake occurs or incomplete information is printed, a notice will be displayed in-store with the correct details. Actual products may vary from pictures. Large generators, forklifts and certain items are only available at our Johannesburg South Warehouse. Please note: We do not deliver. Please refer to the safety tips on our website and take protective and preventative measures when using these items. For more information, visit our website at www.adendorff.co.za. Please call your nearest branch for assistance. Trading hours: Mon. to Fri. 08:00 – 17:00. Sat. 08:00 – 13:00

36 E&OE 0861 ADENDO / 0861 23 36 36 www.adendorff.co.za