Oracle® Enterprise Manager Cloud Control Sybase Adaptive Server Enterprise (ASE) Plug-in User's Guide
13c Release 4 F23302-02 December 2020 Oracle Enterprise Manager Cloud Control Sybase Adaptive Server Enterprise (ASE) Plug-in User's Guide, 13c Release 4
F23302-02
Copyright © 2015, 2020, Oracle and/or its affiliates.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then the following notice is applicable:
U.S. GOVERNMENT END USERS: Oracle programs (including any operating system, integrated software, any programs embedded, installed or activated on delivered hardware, and modifications of such programs) and Oracle computer documentation or other Oracle data delivered to or accessed by U.S. Government end users are "commercial computer software" or "commercial computer software documentation" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, reproduction, duplication, release, display, disclosure, modification, preparation of derivative works, and/or adaptation of i) Oracle programs (including any operating system, integrated software, any programs embedded, installed or activated on delivered hardware, and modifications of such programs), ii) Oracle computer documentation and/or iii) other Oracle data, is subject to the rights and limitations specified in the license contained in the applicable contract. The terms governing the U.S. Government’s use of Oracle cloud services are defined by the applicable contract for such services. No other rights are granted to the U.S. Government.
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
Intel and Intel Inside are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks or registered trademarks of SPARC International, Inc. AMD, Epyc, and the AMD logo are trademarks or registered trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.
This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products, and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth in an applicable agreement between you and Oracle. Contents
Preface Audience v Documentation Accessibility v Related Resources v Conventions v
1 Sybase ASE Plug-in Overview and Prerequisites Introduction to the Sybase ASE Plug-in 1-1 Functionality Highlights 1-2 Support Updates 1-2 Updated User Interface 1-2 Sybase ASE Out-of-the-Box Monitoring Templates 1-4 Sybase ASE Database Plug-in Metric Thresholds 1-5 Business Intelligence Publisher Reports 1-5 Platforms Supported by the Sybase ASE Plug-in 1-5 Software Versions Supported by the Sybase ASE Plug-in 1-5 Sybase ASE Plug-in Prerequisites 1-6
2 Configuring the Sybase ASE Server for Monitoring
3 Configure the Management Agent and Deploy the Sybase ASE Plug-in
Configure the Management Agent to Deploy the Plug-In 3-1 Assigning Advanced Privileges to User 3-1 Setting and Validating Preferred Credentials 3-2 Deploying the Plug-in 3-2
4 Post-Deployment Configuration Setting up the JDBC Driver 4-1
iii Downloading SAPCAR 4-2 Configure TCP/IP Port Information 4-3 Enabling the TCP/IP Port 4-3 Finding the TCP/IP Port 4-3 Adding Instances for Monitoring 4-4 Verifying and Validating the Plug-in 4-6 Undeploying the Plug-in 4-8
5 Creating and Editing Jobs for the Sybase ASE Target
6 Metrics and Reports for the Sybase ASE Plug-in Using the Sybase ASE Plug-in Reports 6-1 Deploying Reports After BI Publisher is Configured 6-3 Complete List of Plug-in Metrics 6-3 Using the Sybase ASE Plug-in Monitoring Templates 6-4
7 Inventory and Usage Details Inventory and Usage Details Page Feature Summary 7-1 Accessing the Inventory and Usage Details Page 7-2 Additional Information 7-2
8 Troubleshooting the Sybase ASE Plug-in Metric Collection Errors 8-1
Index
iv Preface
This document provides a brief description about the Oracle system monitoring plug-in for Sybase Adaptive Server Enterprise (ASE), details on the versions the plug-in supports, prerequisites for installing the plug-in, and step-by-step instructions on how to install, verify, and validate the plug-in. Audience
This plug-in installation guide is for Enterprise Manager users who perform administrative and problem-resolution tasks on a Sybase ASE system. Documentation Accessibility
For information about Oracle's commitment to accessibility, visit the Oracle Accessibility Program website at http://www.oracle.com/pls/topic/lookup? ctx=acc&id=docacc.
Access to Oracle Support Oracle customers that have purchased support have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/pls/ topic/lookup?ctx=acc&id=info or visit http://www.oracle.com/pls/topic/lookup? ctx=acc&id=trs if you are hearing impaired. Related Resources
For detailed information on Oracle Enterprise Manager, see the documentation available in Oracle Help Center: https://docs.oracle.com/en/enterprise-manager/ Conventions
The following text conventions are used in this document:
Convention Meaning boldface Boldface type indicates graphical user interface elements associated with an action, or terms defined in text or the glossary. italic Italic type indicates book titles, emphasis, or placeholder variables for which you supply particular values. monospace Monospace type indicates commands within a paragraph, URLs, code in examples, text that appears on the screen, or text that you enter.
v 1 Sybase ASE Plug-in Overview and Prerequisites
This chapter describes the Sybase Adaptive Server Enterprise (ASE) plug-in and provides the prerequisites necessary for installation on Oracle Enterprise Manager Cloud Control. The following topics are presented in this chapter: • Introduction to the Sybase ASE Plug-in • Functionality Highlights • Platforms Supported by the Sybase ASE Plug-in • Software Versions Supported by the Sybase ASE Plug-in • Sybase ASE Plug-in Prerequisites Introduction to the Sybase ASE Plug-in
The System Monitoring Plug-in for Sybase Adaptive Server Enterprise extends Oracle Enterprise Manager Cloud Control 13c to add support for managing Sybase Adaptive Server instances. By deploying the plug-in within your Cloud Control environment, you gain the following management features: • Monitor Sybase Adaptive Server instances. • Gather configuration data and track configuration changes for Sybase Adaptive Server instances. • Raise alerts and violations based on thresholds set on monitored metrics and configuration data. • Provide rich out-of-box reports based on the gathered data. • Support monitoring by a remote Agent. Local Agent is an agent running on the same host as the Sybase Adaptive Server. Remote Agent is an agent running on a host that is different from the host where Sybase Adaptive Server is running. • Collect and display top SQL Statements and their related statistics, including CPU Time and Execution Count, of your Sybase ASE Database. • Collect and display information regarding the top Lock Wait Events in Sybase ASE Database, including top Wait Count by Table and top Wait Times. • Utilization of Cloud Control jobs to start and stop the Sybase ASE database. These jobs are not only accessible from the Cloud Control Jobs Library but also from the Sybase ASE plug-in's UI home page. • Expose vital Sybase ASE metrics in the form of easy-to-use charts and tables.
1-1 Chapter 1 Functionality Highlights
Functionality Highlights
This release of the Sybase ASE Database plug-in for Oracle Enterprise Manager Cloud Control 13c includes many features for better visibility into your Sybase ASE environment. Highlighted below are some of the features included in this release: • Support Updates • Updated User Interface • Sybase ASE Out-of-the-Box Monitoring Templates • Sybase ASE Database Plug-in Metric Thresholds • Business Intelligence Publisher Reports Support Updates
The Sybase ASE Database plug-in for Oracle Enterprise Manager Cloud Control 13c has been updated to support the jconn4.jar JDBC driver and maintain support for jconn3.jar. Updated User Interface
The user interface has been updated to add a Performance page and add a new link to the Home page. The Home page (Figure 1-1) has been enhanced with the addition of a link in the Summary section to the Performance page. This has enabled more efficient navigation throughout the plug-in.
1-2 Chapter 1 Functionality Highlights
Figure 1-1 Sybase ASE Target Home Page
The all-new Performance page (Figure 1-2) has been added to the plug-in to give greater insight into the monitored Sybase ASE key performance indicators (KPI's) over a selectable time range. This includes Connection KPI's, Memory KPI's and Space and CPU KPI's.
1-3 Chapter 1 Functionality Highlights
Figure 1-2 Sybase ASE Plug-in Performance Page
Sybase ASE Out-of-the-Box Monitoring Templates
This release adds three out-of-the-box monitoring templates (Figure 1-3) to streamline configuration of your Sybase ASE Database. This includes Efficiency, Traffic, and Utilization monitoring templates that you can use depending on your needs.
Figure 1-3 Sybase ASE Plug-in Monitoring Templates
1-4 Chapter 1 Platforms Supported by the Sybase ASE Plug-in
Sybase ASE Database Plug-in Metric Thresholds
This release enables additional metric thresholds (Figure 1-4) to increase user control of your Sybase ASE Database. This includes metric thresholds for Device Statistics, Top 10 Big Cached Objects, Waiting Events Statistics, Cache Pools Statistics, and many more.
Figure 1-4 Sybase ASE Plug-in Metric Thresholds
Business Intelligence Publisher Reports
In this release, Information Publisher Reports included in the previous release of the Sybase ASE Plug-in have been migrated to BI Publisher Reports. BI Publisher Reports eliminate complexity and simplify report development and maintenance. See Metrics and Reports for the Sybase ASE Plug-in for more information on using these reports. Platforms Supported by the Sybase ASE Plug-in
The plug-in supports monitoring of Sybase Adaptive Server Enterprise (ASE) on all the platforms where Sybase ASE can be installed. Software Versions Supported by the Sybase ASE Plug-in
This plug-in supports the following versions of products: • Enterprise Manager Cloud Control 13c:
1-5 Chapter 1 Sybase ASE Plug-in Prerequisites
– The plug-in is certified for the latest release of Oracle Enterprise Manager Cloud Control 13c (13.1.0.1.0) or higher (Oracle Management Server (OMS) and Oracle Management Agent). • Version 15.7 and 16.0 or higher of Express (XE), Enterprise (EE), and Developer (DE) editions of Sybase Adaptive Server Enterprise.
Note:
The system monitoring plug-in for Sybase Adaptive Server is not certified for monitoring Sybase Adaptive Server Clusters.
Sybase ASE Plug-in Prerequisites
The following prerequisites must be met before you can deploy the plug-in:
1. Sybase Adaptive Server Enterprise version 15.7 to 16.0 or higher is installed. 2. The following components of Oracle Enterprise Manager Cloud Control are installed and running: • Oracle Enterprise Manager Cloud Control 13c (13.1.0.1.0) or higher. • Oracle Management Agent 13.1.0.1.0 or higher (any platform supported by this release of agent). You can install the agent on the same computer as Sybase Adaptive Server (referred to as local agent monitoring), or you can install the agent on a different host computer from Sybase Adaptive Server (referred to as remote agent monitoring). • The Inventory and Usage Patch (20692416) must be installed. This patch is available for download from My Oracle Support (https:// support.oracle.com). 3. The Monitoring and Diagnostic (MDA) tables must be installed before they can be queried. Follow the steps below to install MDA tables: a. Ensure that the configuration parameter enable cis is set to 1. If not, restart ASE. Run the following command: sp_configure ©enable cis©, 1 go
b. Install the MDA tables. Do not run this script with 'sqsh' as it will cause errors. 'sqsh' sees a '$' as the start of a sqsh variable, and this distorts the native RPC names, since these start with a '$' as well. Instead, either use 'isql' as below, or run 'sqsh' with the '-Lexpand=0' option to disable sqsh variable expansion feature. This script is included in the installmaster. isql -U sa -P yourpassword -S YOURSERVER \ -i $SYBASE/$SYBASE_ASE/scripts/installmontables
c. Assign mon_role to logins allowed MDA access. This also applies to the 'sa' login. use master go
1-6 Chapter 1 Sybase ASE Plug-in Prerequisites
grant role mon_role to sa go d. Test basic MDA configuration as follows. You may need to disconnect and reconnect to activate mon_role when you grant this role to the login you are currently using. select * from master..monState go e. Enable all configuration parameters. These are all dynamic (except the per object statistics active parameter). For all 'pipe' tables, the number of messages is set to 100 here, but you can choose a larger size. sp_configure "enable monitoring", 1 go sp_configure "sql text pipe active", 1 go sp_configure "sql text pipe max messages", 500 go sp_configure "plan text pipe active", 1 go sp_configure "plan text pipe max messages", 100 go sp_configure "statement pipe active", 1 go sp_configure "statement pipe max messages", 500 go sp_configure "errorlog pipe active", 1 go sp_configure "errorlog pipe max messages", 100 go sp_configure "deadlock pipe active", 1 go sp_configure "deadlock pipe max messages", 100 go sp_configure "wait event timing", 1 go sp_configure "process wait events", 1 go sp_configure "object lockwait timing", 1 go sp_configure "SQL batch capture", 1 go sp_configure "statement statistics active", 1 go sp_configure "per object statistics active", 1 go sp_configure "enable stmt cache monitoring", 1 go sp_configure "max SQL text monitored", 4096 go set mon_stateful_history off go f. Set the following static parameter to a higher value (the setting is in bytes per user connection) if you are expecting a lot of (or long) SQL batches: sp_configure "max SQL text monitored", 2048 go
1-7 Chapter 1 Sybase ASE Plug-in Prerequisites
Note:
Enabling the following configuration parameters will result in >5% performance overhead: sp_configure "sql text pipe active", 1 sp_configure "sql text pipe max messages", 500 sp_configure "max SQL text monitored", 2048 sp_configure "plan text pipe active", 1 sp_configure "plan text pipe max messages", 100 sp_configure "statement pipe active", 1 sp_configure "statement pipe max messages", 500 sp_configure "statement statistics active", 1 sp_configure "per object statistics active", 1 sp_configure "enable stmt cache monitoring", 1 sp_configure "max SQL text monitored", 4096 set mon_stateful_history off
4. As part of the JDBC URL, either IP Address or host name can be provided. Ensure that the host name can be resolved consistently on the network. Standard TCP tools such as "nslookup" and "traceroute" can be used to verify the host name. Validate using the following commands on Management Agent where plug-in is deployed: • nslookup
8. Verify that the JDBC drivers are available in your Sybase/SAP ASE Installation. The JDBC drivers are located in the database software installation location:
1-8 Chapter 1 Sybase ASE Plug-in Prerequisites
• For Sybase 15.7 ASE: echo $SYBASE =/apps/sybas $SYBASE/jConnect-7_0/classes/jconn4.jar /apps/sybase/jConnect-7_0/classes/jconn4.jar • Sybase 16.0 ASE /apps/sap/jConnect-16_0/classes/jconn4.jar If the drivers are not there, then follow the instructions in Setting up the JDBC Driver.
1-9 2 Configuring the Sybase ASE Server for Monitoring
This topic describes how to configure Sybase ASE server target configure the Sybase Adaptive Server Enterprise (ASE) target to be monitored by Enterprise Manager Cloud Control. To monitor the Sybase ASE target using Enterprise Manager, the Sybase ASE user must have the role mon_role. In addition to mon_role permissions, the monitoring user must also have Select permissions to access the following sys tables:
• syslisteners • sysloginroles • syssrvroles The following commands will grant Select permission to the monitoring user:
grant select on syslisteners to public go grant select on sysloginroles to public go grant select on syssrvroles (name, srid) to public go
The above steps will give Select permission to all existing users in the database. To grant Select permission to only the monitoring user, referred to as monuser below, run the following commands. To execute these commands, the user must have sa_role permissions.
1. Create a group. sp_addgroup OracleEMGroup go
2. Add the user monuser to the group. sp_adduser monuser, null, OracleEMGroup go
3. Grant Select permission on the tables to OracleEMGroup. grant select on syslisteners to OracleEMGroup go grant select on sysloginroles to OracleEMGroup go grant select on syssrvroles (name, srid) to OracleEMGroup go
2-1 3 Configure the Management Agent and Deploy the Sybase ASE Plug-in
This chapter describes how to configure the Enterprise Manager Cloud Control Management Agent to allow for monitoring of the Sybase Adaptive Server Enterprise (ASE) target. The following topics are described in this chapter: • Configure the Management Agent to Deploy the Plug-In • Deploying the Plug-in Configure the Management Agent to Deploy the Plug-In
To configure the Agent, you must first ensure that the user starting the Agent service belongs to the Local Administrators Group. Also, you must set the preferred credentials on all Agents where you want to deploy the plug-in. Follow the instructions below to configure the Agent: • Assigning Advanced Privileges to User • Setting and Validating Preferred Credentials Assigning Advanced Privileges to User
(For Microsoft Windows ONLY.) To assign advanced privileges in a Microsoft Windows environment, do the following:
1. Locally on the Microsoft Windows node hosting the Agent, check that the user starting the Agent service belongs to the Local Administrators Group. If not, then add it. 2. Open the Local Security Settings Windows Tool and give the following Advanced Privileges to the user starting the Agent service: • Act as part of the operating system • Adjust memory quotas for a process • Logon as batch job • Replace a process level token 3. Restart the Agent service if it is running. 4. Set the Preferred Credentials for the Host and the Agent in Cloud Control. For more information, see Setting up the JDBC Driver. • The OS user set in the Preferred Credentials must belong to the Local Administrators Group. • This OS user must have the following Advanced Privileges: – Act as part of the operating system
3-1 Chapter 3 Deploying the Plug-in
– Adjust memory quotas for a process – Logon as batch job – Replace a process level token Setting and Validating Preferred Credentials
To set the preferred credentials on all Agents where you want to deploy the plug-in, do the following:
1. In Enterprise Manager Cloud Control, from the Setup menu, select Security, then Preferred Credentials. The Preferred Credentials page appears, showing a table of targets. 2. Select Host target type from the table and then click Managed Preferred Credentials. The Host Preferred Credentials page appears. 3. In the Host Preferred Credentials page, in the Target Credentials section, select the host that is running the Management Agent where the plug-in has to be deployed, and click Set. 4. In the Select Named Credential dialog box, Select Credential as New and specify the user name and password and click Test and Save. If your test runs successfully, your credentials are set correctly. 5. Run the OS Command job for the Management Agent where the plug-in has to be deployed. • Log in to Enterprise Manager Cloud Control. • From the Enterprise menu, select Job and then Activity. • In the Job Activity page, from the Create Job list, select OS Command, and click Go. • Fill up the details required in the following pages, and click Submit to run the job. If the job runs successfully, your credentials are set correctly. Deploying the Plug-in
See Managing Plug-ins in the Oracle Enterprise Manager Cloud Control Administrator's Guide for steps to deploy the plug-in.
3-2 4 Post-Deployment Configuration
This chapter describes the tasks to complete after the Management Agent is successfully deployed. The following topics are described in this chapter: • Setting up the JDBC Driver • Configure TCP/IP Port Information • Adding Instances for Monitoring • Verifying and Validating the Plug-in • Undeploying the Plug-in Setting up the JDBC Driver
Follow the steps below to set up jConnect for the Sybase Adaptive Server plug-in:
1. Download the jConnect JDBC driver version 7.0. a. Go to the SAP web site: https://support.sap.com/swdc
b. Log in with your active SAP support credentials. c. On the left side of the page, select Databases. d. Select SAP Adaptive Server Enterprise. e. Re-authenticate with your SAP support credentials. f. Select Database Patches. g. Select SAP ASE FOR BUSINESS SUITE. h. Select SAP ASE 16 DBCLIENT BUS.SUITE i. Select the appropriate platform for where the driver will be placed (Oracle Management Agent host): - AIX 64-bit - HP-UX on IA64 64-bit - Linux on x86_64 64-bit - Oracle Solaris on SPARC 64-bit - Windows on x64 64-bit j. Check the box for ASEBC1600002 and click Add to Download Basket. k. Re-authenticate with your SAP support credentials. Close the pop-up dialog box once added to Download Basket. l. Click Maintain Download Basket. m. In the pop-up windows, click ASEBC1600002 in the description column.
4-1 Chapter 4 Setting up the JDBC Driver
n. The file ASEBC1600002_0-20012477.SAR will begin downloading in your web browser. o. Extract the downloaded .sar file with SAP's sapcar.exe extraction utility. This must be done on a Windows host. See Downloading SAPCAR for details. p. After extracting the .sar file, the jconn4.jar file should be located in the sybjdbc\jconn4.jar directory. 2. If it does not already exist, create a $ORACLE_HOME\plugins\dependencies\oracle.em.ssad\jdbcdriver\ directory. 3. Copy the JDBC driver file (jConn.jar) into the $ORACLE_HOME\plugins\dependencies\oracle.em.ssad\jdbcdriver\ directory. Downloading SAPCAR
Follow the steps below to download SAPCAR:
1. Go to the SAP web site: https://support.sap.com/swdc
2. Log in with your active SAP support credentials. 3. On the left side of the page, select Support Packages and Patches. 4. Select Browse by. 5. Select Additional Components. 6. Select SAPCAR. 7. Select SAPCAR 7.21. 8. Select the platform used for extracting the .sar file: • AIX 64bit • HP-UX on IA64 64bit • HP-UX on PA-RISC 64bit • Linux on IA32 32bit • Linux on IA64 64bit • Linux on Power 64bit • Linux on x86_64 64bit • Linux on zSeries 64bit • OS/400 • Solaris on SPARC 64bit • Solaris on x86_64 64bit • Windows Server on IA32 32bit • Windows on IA64 64bit • Windows on x64 64bit • z/OS 64bit
4-2 Chapter 4 Configure TCP/IP Port Information
9. Check the box for SAPCAR_0-80000935.EXE and select Add to Download Basket. 10. Select Maintain Download Basket. 11. Click SAPCAR in the Description column to begin the download of the SAPCAR_0-80000935.EXE file. You may need to re-authenticate with your SAP support credentials. 12. Copy the SAPCAR_0-80000935.EXE and ASEBC1600002_0-20012477.SAR files to the host system. 13. Run the sapcar.exe command to extract the .sar file. For example: # ./SAPCAR_0-80000935.EXE -xvf ASEBC1600002_0-20012477.SAR
14. In the extracted folder sybjdbc, copy jconn4.jar and move to the appropriate plug-in JDBC path. Configure TCP/IP Port Information
The following sections provide information you require to enable the TCP/IP port and to find the TCP/IP port for a particular Sybase ASE instance: • Enabling the TCP/IP Port • Finding the TCP/IP Port Enabling the TCP/IP Port
For all editions of Sybase Adaptive Server Enterprise
1. From the Sybase Adaptive Server Configuration Manager, select Sybase Adaptive Server Network Configuration in the left panel and navigate to the Sybase Adaptive Server instance. The right panel displays all protocols for the specified Sybase Adaptive Server instance and their status. 2. Ensure that TCP/IP is enabled. 3. (If TCP/IP is disabled), right-click TCP/IP and select Properties. The TCP/IP Properties dialog box appears. 4. In the Protocol tab, select enabled, and click Apply. 5. Restart the Sybase Adaptive Server instance. Finding the TCP/IP Port
To find the TCP/IP port number for a particular Sybase Adaptive Server instance, run the following query:
Select address_info from syslisteners
The above query returns the host address followed by the port number.
4-3 Chapter 4 Adding Instances for Monitoring
Adding Instances for Monitoring
After successfully deploying the plug-in, follow these steps to add the plug-in target to Cloud Control for central monitoring and management:
1. From the Setup menu, select Add Target and then Add Targets Manually as shown in Figure 4-1:
Figure 4-1 Add Targets Manually Menu
2. In the Add Targets Manually page (Figure 4-2), select Add Targets Declaratively by Specifying Target Monitoring Properties, select Target Type as Sybase Adaptive Server Enterprise, select a Monitoring Agent and click Add Manually.
4-4 Chapter 4 Adding Instances for Monitoring
Figure 4-2 Add Targets Manually Page
3. In the Add Sybase Adaptive Server Enterprise page (Figure 4-3), provide the following information for the properties: • Target Name: Unique target name across all the Cloud Control targets, such as SybaseServer_Hostname. This is the display name in Cloud Control. It represents this Sybase Adaptive Server target across all user interfaces within Cloud Control. • Monitoring Sybase ASE Credentials – Sybase ASE User Name: Valid user for the database in mon_role. – Sybase ASE Password: Corresponding password for the database user. – Confirm Sybase ASE Password: Confirm password entry. • Sybase ASE Host Credentials – User Name: Operating System account for Sybase host. This account must also be the Sybase User. – Password: Corresponding password for the host user name. – Confirm Password: Confirm password entry. • Properties – JDBC Driver: Optional parameter. Provide this value in the following format:
4-5 Chapter 4 Verifying and Validating the Plug-in
com.sybase.jdbc3.jdbc.SybDriver – JDBC URL: Provide the URL in the following format: jdbc:sybase:Tds:
The JDBC URL argument represents a data source. Parameter definitions are as follows: jdbc:sybase: Indicates that the connection is to a Sybase ASE server. server: Fully qualified hostname or IP address of the database server. port: TCP/IP server port number assigned to the database server, which is an integer between 0 and 65535. The default port for Sybase ASE is 5000. 4. Click Test Connection to make sure the parameters you entered are correct.
Figure 4-3 Add Sybase Adaptive Server Enterprise Page
After you deploy and configure the plug-in to monitor one or more targets in the environment, you can customize the monitoring settings of the plug-in. This alters the collection intervals and threshold settings of the metrics to meet the particular needs of your environment. If you decide to disable one or more metric collections, this could impact the reports that the metric is a part of. Verifying and Validating the Plug-in
After waiting a few minutes for the plug-in to start collecting data, use the following steps to verify and validate that Enterprise Manager is properly monitoring the plug-in target:
1. Click the Sybase Adaptive Server target link from the All Targets page. The Sybase ASE home page appears (Figure 4-4):
4-6 Chapter 4 Verifying and Validating the Plug-in
Figure 4-4 Sybase ASE Target Home Page
2. Verify that no metric collection errors are reported by clicking Monitoring and then Metric Collection Errors from the Target menu. 3. Ensure that reports can be seen and no errors are reported by clicking Information Publisher Reports in the Target menu and viewing reports for the Sybase ASE target type. 4. Ensure that configuration data can be seen by clicking Configuration and then Last Collected in the Target menu. If configuration data does not immediately appear, click Refresh in the Latest Configuration page. 5. Ensure that the Analysis page can be viewed by clicking Analysis in the Target menu. The Sybase ASE Analysis page appears (Figure 4-5):
4-7 Chapter 4 Undeploying the Plug-in
Figure 4-5 Sybase ASE Target Analysis Page
Undeploying the Plug-in
See Managing Plug-ins in the Oracle Enterprise Manager Cloud Control Administrator's Guide for steps to undeploy the plug-in.
4-8 5 Creating and Editing Jobs for the Sybase ASE Target
This topic describes how to use Enterprise Manager to create and edit jobs for the Sybase ASE target. Follow the steps below to create and edit jobs:
1. From the Enterprise menu, select Job, then click Activity. 2. On the Job Activity page, select a job type from the Create Job menu and click Go. Select one of the following: • Startup Sybase ASE – Performs a Startup of the Sybase Adaptive Server Enterprise. – When Sybase ASE is shut down, the Startup job icon will be accessible in the Summary section of the Target Home page – Requires the STARTSERVER and the RUNFILE environmental variables to be set correctly on the Sybase ASE host.
Note:
For Windows systems, the Startup Sybase ASE job requires that the SYBSERVICE environment variable be set to the name of the Sybase Service. For example: SYBSQL_NODS16WIN12.
• Shutdown Sybase ASE – Performs a Shutdown of the Sybase Adaptive Server Enterprise. – When Sybase ASE is running, the Shutdown job icon will be accessible in the Summary section of the Target Home page. – Requires Admin Sybase ASE Credentials to be configured as a Preferred Credential.
Note:
All jobs available for the Sybase ASE plug-in are only available when the plug-in is set up for local monitoring of the database. Preferred Credentials are required to be set for use.
3. In the General tab of the Create
5-1 Chapter 5
4. These jobs do not require and parameters to be set in the Parameters tab of the Create
Note:
To enable use of the Job buttons found in the Summary section of the Target home page, be sure to set the Preferred Credentials for the Sybase Adaptive Server Enterprise target type.
5-2 6 Metrics and Reports for the Sybase ASE Plug-in
This chapter provides details of the reports gathered by the Sybase ASE plug-in. The following sections are provided: • Using the Sybase ASE Plug-in Reports • Deploying Reports After BI Publisher is Configured • Complete List of Plug-in Metrics • Using the Sybase ASE Plug-in Monitoring Templates Using the Sybase ASE Plug-in Reports
To further aid administrators with critical tasks such as problem diagnosis, trend analysis and capacity planning, the Sybase ASE Database plug-in includes 17 out-of- box reports (Figure 6-1):
Figure 6-1 Sybase ASE Plug-in BI Publisher Reports
Follow the steps listed below to generate a new report from one of the out-of-the-box reports provided by Oracle:
1. From the Enterprise menu, select Reports, then BI Publisher Enterprise Reports as shown in Figure 6-2:
6-1 Chapter 6 Using the Sybase ASE Plug-in Reports
Figure 6-2 BI Publisher Enterprise Reports Menu
2. Scroll down to the Sybase ASE section, find the desired report, and click the report title hyperlink. 3. After the reports have been sorted to Sybase ASE reports only, find the desired report and click on the report title hyperlink. Figure 6-3 shows an example of a report:
Figure 6-3 Sybase ASE BI Publisher Report Example
Table 6-1 shows the BI Publisher Enterprise Reports provided by Oracle:
6-2 Chapter 6 Deploying Reports After BI Publisher is Configured
Table 6-1 Sybase ASE Plug-in Reports
Report Name Report Description Sybase ASE Engines Statistics Displays Sybase ASE Engines related information. Sybase ASE Configuration Displays Sybase ASE Configuration Information. Sybase ASE Data Cache Statistics Displays Data Cache related information. Sybase ASE Database Log Displays Database log related information. Statistics Sybase ASE Databases Space Displays Databases Space related information. Statistics Sybase ASE Device IO Statistics Displays Device IO related information. Sybase ASE Procedure Cache Displays Procedure Cache related information. Statistics Sybase ASE Deadlock Statistics Displays the deadlock statistics for Sybase ASE. Sybase ASE Error Statistics Displays the error statistics for Sybase ASE. Sybase ASE Open Objects Displays the Open Objects Buffer and Page Read/Write statistics for Sybase Statistics ASE. Sybase ASE Process Statistics Displays the process statistics for Sybase ASE. Sybase ASE SQL Statistics Displays the SQL statistics for Sybase ASE. Sybase ASE User Statistics Displays the user statistics for Sybase ASE. Sybase ASE Network IO Displays Network Monitoring Statistics Report. Monitoring Report Sybase ASE Performance Displays Sybase ASE performance related information. Statistics Sybase ASE Transaction Log Displays Transaction log related information. Statistics Sybase ASE Worker Threads Displays Sybase ASE worker threads related information. Statistics Deploying Reports After BI Publisher is Configured
If the Sybase ASE plug-in is deployed or upgraded after BI Publisher is already configured and the reports were not deployed automatically, then execute the following command:
emcli deploy_bipublisher_reports -pluginid="oracle.em.ssad" - pluginversion="12.1.0.4.0" -force Complete List of Plug-in Metrics
For a complete list of all the metrics contained in this plug-in, see Sybase Adaptive Server Enterprise Database Metrics in the Oracle Enterprise Manager Cloud Control System Monitoring Plug-in Metric Reference Manual for Non Oracle Database Management.
6-3 Chapter 6 Using the Sybase ASE Plug-in Monitoring Templates
Using the Sybase ASE Plug-in Monitoring Templates
To view the out-of-box templates, from the Enterprise menu, select Monitoring and then Monitoring Templates. Using the Target Type drop down, select Sybase Adaptive Server Enterprise and press the arrow button. A complete list of all out-of-box monitoring templates will be available for use as follows (also, see Figure 6-4): • Sybase ASE Efficiency Monitoring Template: Recommended template for monitoring Sybase ASE efficiency. • Sybase ASE Traffic Monitoring Template: Recommended template for monitoring Sybase ASE traffic. • Sybase ASE Utilization Monitoring Template: Recommended template for monitoring Sybase ASE utilization.
Figure 6-4 Sybase ASE Plug-in Monitoring Templates
To apply a monitoring template to a Sybase ASE target, perform the following actions:
1. Click the desired monitoring template to select it. 2. Click Actions and select Apply. 3. Choose to either replace or override existing thresholds with the Apply Options radial button. 4. Click Add to add the Sybase ASE Targets to apply the template to. Follow the prompts through the target Search and Select Targets screen. 5. Click Ok and a confirmation message will appear at the top of the page notifying of a successful application. The Actions button found on the Monitoring Templates screen will also give access to setting a selected template as "Default" for all new Sybase ASE Target deployments, or Edit an existing template's threshold values. See Using Monitoring Templates in the Oracle Enterprise Manger Cloud Control Administrator's Guide for more information on how to use Monitoring Templates in Enterprise Manager Cloud Control 13c.
6-4 7 Inventory and Usage Details
This chapter describes the features and how to access the Inventory and Usage Details page (Figure 7-1) for the Sybase ASE database. The following sections are discussed: • Inventory and Usage Details Page Feature Summary • Accessing the Inventory and Usage Details Page • Additional Information
Figure 7-1 Inventory and Usage Details Page
Inventory and Usage Details Page Feature Summary
With the Inventory and Usage Details page you can: • View inventory summaries for your Sybase ASE databases. • View inventory summary information in the context of different dimensions such as version, platform, OS version and vendor, life cycle, department, location, and cost center. • Drill down multiple levels of inventory details. • View to a pie chart to break down the inventory data for the roll-up option by color-coded percentages. • Repeatedly revise selections to refresh chart and details based on new selections. • Export deployment and details tables as a .csv file.
7-1 Chapter 7 Accessing the Inventory and Usage Details Page
Accessing the Inventory and Usage Details Page
To view inventory and usage details:
1. From the Enterprise menu, select Configuration, and then select Inventory and Usage Details. Alternatively, you can click Details in the Inventory and Usage region of the Enterprise Summary page. 2. Select the entity you want to examine and choose a roll-up option. For example, show all deployed hosts rolled up by platform. The page refreshes automatically upon selection. 3. In any given row in the top table, there is a count bar next to the count that represents a percentage of the maximum count. For example, if the maximum number of hosts by platform is four, the bar for hosts represented on two platforms would be half as long. Click the bar to refresh the details table and chart for the row. Additional Information
For further information, see Working with Inventory and Usage Details in the Oracle Enterprise Cloud Control Database Lifecycle Management Administrator's Guide.
7-2 8 Troubleshooting the Sybase ASE Plug-in
This chapter describes the possible troubleshooting scenarios and any known issues for the Sybase ASE plug-in. The following topics are presented in this chapter: • Metric Collection Errors Metric Collection Errors
If the following parameters are not enabled for the Sybase Adaptive Server Enterprise (ASE) plug-in, metric collection errors may occur:
sp_configure "sql text pipe active", 1 sp_configure "sql text pipe max messages", 500 sp_configure "max SQL text monitored", 2048 sp_configure "plan text pipe active", 1 sp_configure "plan text pipe max messages", 100 sp_configure "statement pipe active", 1 sp_configure "statement pipe max messages", 500 sp_configure "statement statistics active", 1 sp_configure "per object statistics active", 1 sp_configure "enable stmt cache monitoring", 1 sp_configure "max SQL text monitored", 4096 set mon_stateful_history off
For information about the troubleshooting scenarios that you might encounter while working with the System Monitoring plug-ins, see Troubleshooting the Sybase ASE Plug-in in the Oracle Enterprise Manager Cloud Control Third-Party Database Plug-in Troubleshooting Guide.
8-1 Index
A metrics, 6-3 monitoring advanced privileges, 3-1 add instances, 4-4
C P configure Management Agent, 3-1 plug-in create jobs, 5-1 deploy, 3-2 undeploy, 4-8 D verify and validate, 4-6 preferred credentials deploy, 3-2 set and validate, 3-2
E R edit jobs, 5-1 reports, 6-1
I T Inventory and Usage Details TCP/IP features, 7-1 configure, 4-3 how to access, 7-2 enable, 4-3 finding, 4-3 troubleshooting J metric collection errors, 8-1 JBDC driver, 4-1 jobs U create and edit, 5-1 undeploy plug-in, 4-8 M V Management Agent configuring, 3-1 verify and validate plug-in, 4-6 metric collection errors, 8-1
Index-1