DOCSLIB.ORG

Fairlead Rollers

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Fairlead Rollers Fairlead Rollers Part Name Part Number Notes Fairlead Roller 112052 DDG Fairlead Roller 112122 LSD Fairlead Roller 112342 LPD-17 LCU 2000 Fairlead 112385 LCU 2000 Roller Cover 1 Line Handling and Anchor Gear Part Name Part Number Notes Forward Capstan Wheel 112144 FFG Brake Forward Wildcat 112341 LPD-17 Forward Capstan Wheel 112344 LPD-17 Brake Wildcat Chain Pipe 112345 LPD-17 Cover Forward Port Capstan 112232 225'WLB Towing Bit 112240 110'WPB LCU 2000 Forward 112386 LCU2000 Anchor Windlass LCU 2000 Stern Anchor 112387 LCU2000 Winch BD Crane Barge Anchor 112390 USA BD Crane Winch 2 Winches and Windlasses Part Name Part Number Notes Saddle Winch 112046 LHD Deck Winch 112402 Improved Navy (LRIP) Lighterage System Hoggin-in 112403 Improved Navy Winch Lighterage System Deck Winch 112404 Improved Navy (FRP) Lighterage System Deck Winch (FRP) 112406 Improved Navy Gypsy Head Lighterage System LCS-1 Trigon Winch 112417 LCS-1 LCS-2 UNREP Winch 112427 LCS-2 Boat Winch 112221 87'WPB AS Wildcat 112483 AS AS Aft Anchor Windlass 112485 AS Gypsy Head 3 Part Name Part Number Notes WLM Anchor Windlass 112280 175’ WLM 4 Capstans Part Name Part Number Notes Aft Capstan 112104 CG Starboard/Centerline 112106 CG Capstan Capstan Assy, Windlass 112051 DDG Aft Capstan 112063 DDG Warping Capstan 112120 LSD-Fore and Aft Capstans Mooring Capstan 112125 LSD-Fits amidships mooring and LCAC recovery capstans Forward Capstan 112140 FFG Aft Capstan 112143 FFG Forward Capstan 112180 LPD-4 Aft Capstan 112185 LPD-4 5 Part Name Part Number Notes Mooring Capstan 112163 LHD– Fits all Capstans Capstans (fits both 112308 CVN-Fits both Focsle Focsle and Fantail) and fantail Midship's Capstans 112309 CVN Forward Capstan 112340 LPD-17 LCS-1 Capstan 112411 LCS-1 LCS -2 Mooring Capstan 112428 LCS-2 Forward Port Capstan 112232 225'WLB Forward Starboard 112233 225'WLB Capstan AS Forward Capstan 112482 AS 6 Capstans, Winch and Windlass Controllers Part Name Part Number Notes Windlass Control Box 112048 CG, FFG, LSD, LPD-17 Windlass Control 112102 CG Station Stroke Control Assy 112053 DDG Port Windlass Control 112123 LSD Station Starboard Windlass 112124 LSD Control Station Forward Capstan 112343 LPD-17 Controls Anchor Windlass 112234 225'WLB Control AS Forward Capstan 112487 AS Control 7 Underway Replenishment Equipment Part Name Part Number Notes UNREP Refueling Probe 112050 T-AOE, LHD, LHA, Fuel Receiver 112061 CG, DDG, FFG, LSD, LPD-17, LPD-4, LCS 1, LCS 2 Sliding Padeye 112103 CG, LPD-17 Type B-12 Tilting Sliding Padeye 112056 DDG’s 51 - DDG 58 Type T12 Type T-12 Sliding 112060 DDG’s 59 and Higher Padeye-Port Type T-12 Sliding 112058 DDG’s 59 and Higher Padeye-Starboard Double Fuel Receiver 112035 CVN, LHD, LHA, LPD- 17 8 Small Boats and Davits Part Name Part Number Notes 7M RHIB Outdrive 112047 All standard USN 7M Cover RHIBs 7M RHIB Consoles 112059 All standard USN 7M RHIBs Port Boat Davit Controls 112110 CG Starboard Boat Davit 112111 CG Controls DDG Flt IIA RHIB Davit 112062 DDG’s 90 and higher Slewing Arm Davit 112079 DDG’s 51-89 only Welin-Lanbie Boat Davit 112126 LSD Aux Control Welin-Lanbie Boat Davit 112127 LSD Main Control Davit Control 112142 FFG Davit Control 112182 LPD-4 Boat Davit Control 112347 LPD-17 9 Part Name Part Number Notes LCS Davit Control 112413 LCS-1 Cabinet LCS Small Davit Motor 112416 LCS-1 LCS Large Davit Motor 112420 LCS-1 LCS Rescue Boat 112425 LCS-1, LCS-2 Center Console LCS Rescue Boat Davit 112426 LCS-2 RHIB Console 112220 87'WPB Avon SR4 RHIB 112393 LCU2000 MCM Small Boat Davit 112366 MCM Control 12” Diameter JP-5 Hose 112040 LPD-17 Reel 10 Miscellaneous Deck Equipment Part Name Part Number Notes Swimmer Rescue Collar 112043 All Classes LCS Large Hawser Reel 112412 LCS-1 LCS Small Hawser Reel 112415 LCS-1 LCS Exhaust Stack 112423 LCS-1 LCS Rescue Boat 112429 LCS-2 Electrical Box LCS Stern Launch 112031 LCS-2 Control Panel Inflatable Life Raft 112219 87'WPB 378’ WHEC Auxiliary 112260 378'WHEC Exhaust 378’ WHEC Main 112261 378'WHEC Turbine Exhaust 378’ WHEC Main 112262 378'WHEC Engine Intake 378’ WHEC Generator 112263 378'WHEC Exhaust 11 Part Name Part Number Notes P 100 Firefighting 112241 110'WPB Pump P 6 Dewatering 112242 110'WPB Pump Stokes Liter 112246 All Classes LCU 2000 Heat 112395 LCU2000 Chamber Exhaust LCU 2000 Emergency 112396 LCU2000 Generator Exhaust LCU 2000 Main Engine 112397 LCU2000 Exhaust LCU 2000 Generator 112398 LCU2000 Exhaust LCU 2000 Exhaust 112399 LCU2000 Stacks LCU 2000 Ramp Cable 112388 LCU2000 Turning Block MSC Diver’s Crane 112500 MSC Diver’s Crane 112501 Controller 12 .
Load more

Recommended publications
  • OHL Technique Covers the Fitting of a Platform-Mounted 3-Phase Transformer (Up to 750Kg) Below Live Conductors
    FITTING PLATFORM-MOUNTED 3-PHASE OHL TRANSFORMER (UP TO 750kg) Technique BELOW LIVE CONDUCTORS 637 (DEAD WORK) 1 Scope/Application This OHL Technique covers the fitting of a platform-mounted 3-phase transformer (up to 750kg) below live conductors. This work shall be carried out on clean poles only. Bare LV or HV transformer terminals or bare fittings shall not be less than 4.3m from ground level. The access/working method will be determined by working through the guidance in OHL technique 250 (refer to Section 1 of this manual for working at height). However, the pole climbing method is described below because it is the most detailed/complex. Where another access/working method is used, the procedure below needs to be changed (simplified) accordingly. Refer to Drawing I-430P1-M637-001 throughout this Instruction. 2 Safety Information Work shall be carried out in accordance with General Requirements in Section 1. Approved mandatory PPE and work wear shall be in accordance with General Requirements in Section 1. Additional Approved PPE and work wear required to complete this task are specified below. Gloves, 11kV Ear protection The task covered by this OHL Technique has significant hazards associated with it identified by the symbol and text CAUTION: This OHL Technique details the risk control measures that must be applied when carrying out the task. If the risk control measures in this procedure are implemented the risks will be controlled. This OHL Technique also forms the method statement for the task. 3 Personnel The minimum team number for this task is two Competent Persons.
    [Show full text]
  • & Marine Engineering
    REFERENCE ROOM Naval Architecture & Marine Engineering ft* University of Michigan Ann Arbgr, M g109 THE UNIVERSITY OF MICHIGAN COLLEGE OF ENGINEERING Department of Naval Architecture and Marine Engineering DESIGN CONSIDERATIONS AND THE RESISTANCE OF LARGE, TOWED, SEAGOING BARGES J. L. Moss Corning Townsend III Submitted to the SOCIETY OF NAVAL ARCHITECTS AND MARINE ENGINEERS Under p. O. No. 360 September 15, 1967 In the last decade, -ocean-going unmanned barges have become an increasingly important segment of our merchant marine. These vessels, commonly over 400 feet long, and sometimes lifting in excess of 15,000 L.T. dead weight, are usually towed on a long hawser behind a tugboat. Because the barges are inherently directionally unstable, twin out- board skegs are attached to achieve good tracking. Model tests are conducted in order to determine towline resistance and the proper skeg position which renders the barge stable. Skegs, vertical appendages similar to rudders, are placed port and starboard on the rake. They create lift and drag, and move the center of lateral pressure aft, thus tending to stabilize a barge towed on a long line. At The University of Michigan many such model experiments have been conducted within the past several years. Since these tests have been carried out for various industrial con- cerns and on specific designs, systematic variations of parameters or other means of specifically relating the results have not been possible in most cases. Nevertheless, on the basis of the results of these largely unrelated tests, recom- mendations can be made regarding good design practice and some specific aspects can be demonstrated.
    [Show full text]
  • Boat Compendium for Aquatic Nuisance Species (ANS) Inspectors
    COLORADO PARKS & WILDLIFE Boat Compendium for Aquatic Nuisance Species (ANS) Inspectors COLORADO PARKS & WILDLIFE • 6060 Broadway • Denver, CO 80216 (303) 291-7295 • (303) 297-1192 • www.parks.state.co.us • www.wildlife.state.co.us The purpose of this compendium is to provide guidance to certified boat inspectors and decontaminators on various watercraft often used for recreational boating in Colorado. This book is not inclusive of all boats that inspectors may encounter, but provides detailed information for the majority of watercraft brands and different boat types. Included are the make and models along with the general anatomy of the watercraft, to ensure a successful inspection and/or decontamination to prevent the spread of harmful aquatic nuisance species (ANS). Note: We do not endorse any products or brands pictured or mentioned in this manual. Cover Photo Contest Winner: Cindi Frank, Colorado Parks and Wildlife Crew Leader Granby Reservoir, Shadow Mountain Reservoir and Grand Lake Cover Photo Contest 2nd Place Winner (Photo on Back Cover): Douglas McMillin, BDM Photography Aspen Yacht Club at Ruedi Reservoir Table of Contents Boat Terminology . 2 Marine Propulsion Systems . 6 Alumacraft . 10 Bayliner . 12 Chris-Craft . 15 Fisher . 16 Four Winns . 17 Glastron . 18 Grenada Ballast Tank Sailboats . 19 Hobie Cat . 20 Jetcraft . 21 Kenner . 22 Lund . 23 MacGregor Sailboats . 26 Malibu . 27 MasterCraft . 28 Maxum . 30 Pontoon . 32 Personal Watercraft (PWC) . 34 Ranger . 35 Tracker . 36 Trophy Sportfishing . 37 Wakeboard Ballast Tanks and Bags . 39 Acknowledgements . Inside back cover Boat Compendium for Aquatic Nuisance Species (ANS) Inspectors 1 Boat Terminology aft—In naval terminology, means towards the stern (rear) bow—A nautical term that refers to the forward part of of the boat.
    [Show full text]
  • Rapier 550 - Standard Specification
    Page 1 of 11 Rapier 550 - Standard Specification Construction The structure of the Rapier 550 is of a modern lightweight construction using the using the latest resin infusion processes and combines high strength Epoxy resin systems throughout the entire structure with a combination of E glass, Kevlar and carbon laminate stiffened by PVC cores to produce an exceptionally strong and light structure optimised for performance sailing. The hull has an exterior gel coat finish with vinylester skin and choice of colours. Everything is female moulded in hi-quality production tooling. The deck and superstructure has an integrally moulded anti-slip surface in places where needed – especially in all areas where crew or guests walk or require access to operate the vessel. The Broadblue Rapier 550 is virtually unsinkable due to its watertight bulkheads, cored construction and buoyancy compartments fore and aft in each hull. Each compartment is separate and sealed off to control water ingress if damaged. All internal textures are a combination of painted, light weight linings, timber and textile trims. The skeg keels of the R550 are separately moulded and bonded to the hull structure, maintaining the integrity of the hull even if the keels are damaged or detached. Other keel options are also available, including low aspect ratio fixed keels, dagger boards and steerable canards. Outside Deck areas Side decks are moulded with non-slip integral to the construction (aft sections can have optional teak/teak-alike surface). All windows to saloon and coach-roof are constructed from appropriate thickness toughened glass. Clear toughened glass on all windows forward of the mast, tinted and heat rejecting glass for roof lights and side and rear windows to aft saloon area.
    [Show full text]
  • Performance of High Modulus Fiber Ropes in Service on Dual Capstan Traction Winches
    PERFORMANCE OF HIGH MODULUS FIBER ROPES IN SERVICE ON DUAL CAPSTAN TRACTION WINCHES: A SIMULATION OF ROPE/WINCH INTERACTIONS DURING DEEP SEA LONG CORING OPERATIONS 1.0 INTRODUCTION At present, UNOLS systems for collecting sea floor sediment samples are limited to the recovery of large diameter [10 cm] cores approximately 25-meter long. The current technology employs a Kullenberg piston corer [wt = ~5,000 lbs.] suspended and controlled by a torque-balanced wire rope [9/16” Dia. / MBL = 16 tons] and single drum trawl winch system. A new and much larger coring device is under development at the Woods Hole Oceanographic Institution. The goal of the new project is to create an integrated yet portable system capable of recovering cores up to 50 meters long in full ocean depths [~ 5500 meters]. The new corer alone has a weight of 25,000 lbs.; and numerical modeling has shown that in operation, the expected maximum tension that the overboarding arrangements will endure [during core extraction] is between 50 and 60,000 pounds. The new system will, for the first time, employ high modulus synthetic fiber rope to replace the ‘traditional’ 3 X 19 wire rope. The change to synthetic rope is necessary, as the weight of a wire rope sufficiently strong to support the proposed corer would have inherently excessive mass to allow reasonable shipboard handling and provide an acceptable factor of safety during operations. This change to fiber rope is possible due to the recent introduction of suitable products made from high performance synthetic fibers. These new high modulus braided ropes are stronger than equivalent diameter wire rope, but are buoyant or lightweight in seawater.
    [Show full text]
  • A Review of Best Available Technology in Tanker Escort Tugs
    A Review of Best Available Technology in Tanker Escort Tugs A Presentation to the Board of Directors Prince William Sound Regional Citizens’ Advisory Council Sept. 19, 2013 Outline • Terms of Reference • Some Historic Context • Escort Tug Inventory • Escort Tug Performance • Vessel Performance Assessment • Gap Analysis – BAT • Summary Terms of Reference • Compile Present Vessel Inventory • SERVS Fleet • RoW Fleet • Various tug types • Analysis of Vessel Performance • Basic performance parameters for escorting • Indirect performance predictions • Best Available Technology Gap Analysis • RoW vs. SERVS • Draft Final Report • Final Report What IS an Escort Tug??? • What makes it different from other tugs? • What creates the performance differences? • What does an “Escort Tug” Rating by Class mean? To be defined by Class as an “Escort Tug”… • The hull of the tug shall be designed to provide adequate hydrodynamic lift and drag forces when in indirect towing mode. Due attention shall be paid to the balance between hydrodynamic forces, towline pull and propulsion forces • The towing winch shall have a load reducing system in order to prevent overload caused by dynamic oscillation in the towing line, and • The propulsors shall be able to provide ample thrust for manoeuvring at higher speeds for tug being in any oblique angular position • The vessel shall be designed so that forces are in equilibrium with a minimum use of propulsive force except for providing forward thrust and balancing transverse forces during escorting service • In case of loss of propulsion, the remaining forces shall be so balanced that the resulting turning moment will turn [yaw] the escort tug to a safer position with reduced heel Therefore, an “Escort Tug” must have… 1.
    [Show full text]
  • Sorted by "Item" [Fancy Free] Inventory Listing - Sail
    Sorted by "Item" [Fancy Free] Inventory Listing - Sail Item Location Anchor, Primary, Delta 45, 160' chain 100' Rode Anchor Locker, Bow Anchor, Secondary, Danforth 40 Starboard Side of Anchor Locker Anchor, Secondary, Danforth 40 rode Port, Aft Lazarette Anchor, snubber line or bridle Anchor Locker, Bow Batteries, spare flashlight (2) Nav Table BBQ Cover Black BBQ, store in x locker when BBQ in use BBQ, Magma Catalina Grill Stern Rail, Port Bilge Pump, Manual, Handle Aft, Port Propane Locker Binoculars, West marine blue Salon, Port, Forward Shelf Boat Hook Port, Aft Lazarette Chart No.1, Symbols, Abbreviations, and Terms Salon, Port Shelf Chart, Maptech Chartbook, San Juan Islands Salon, Poer Shelf Chart, Roll #18421 San Juan Islands Salon, Port Shelf, In Tube Chart, Roll, # 3441, 3442 & 3443 Gulf Islands Salon, Port Shelf, In Tube Cockpit Cushions (2) Stateroom, Aft Starboard when not in use Compass, Handheld Nav Table Coolant, Engine Salon, Forward Settee Storage Crab Cooking Pot V-berth, Starboard Closet Crab Pot with Line & Float Starboard, Aft Lazarette Cruising Guide, Gulf Islands, Dreamspeaker Salon, Port Shelf Cruising Guide, San Juan Islands, Boater's Guidebook Salon, Port Shelf Cruising Guide, Wagonners Salon, Port Shelf Current Atlas & Tables Salon, Port Shelf Cushions, cockpit Stateroom, aft, starboard Cushions, Shorter Posts, dinette table berth conversion Cushion- V-berth, Starboard shelf Deck Fill Cap Wrench (Tool) Nav Table Dinghy, 12' Azzurro Mare inflatable boat; AM365 Dockside, At the Head, Cleated to Dock Dinghy, Foot
    [Show full text]
  • After 88 Years - Four-Masted Barque PEKING Back in Her Homeport Hamburg
    Four-masted barque PEKING - shifting Wewelfsfleth to Hamburg - September 2020 After 88 Years - Four-masted Barque PEKING Back In Her Homeport Hamburg Four-masted barque PEKING - shifting Wewelfsfleth to Hamburg - September 2020 On February 25, 1911 - 109 years ago - the four-masted barque PEKING was launched for the Hamburg ship- ping company F. Laeisz at the Blohm & Voss shipyard in Hamburg. The 115-metres long, and 14.40 metres wide cargo sailing ship had no engine, and was robustly constructed for transporting saltpetre from the Chilean coast to European ports. The ship owner’s tradition of naming their ships with words beginning with the letter “P”, as well as these ships’ regular fast voyages, had sailors all over the world call the Laeisz sailing ships “Flying P-Liners”. The PEKING is part of this legendary sailing ship fleet, together with a few other survivors, such as her sister ship PASSAT, the POMMERN and PADUA, the last of the once huge fleet which still is in active service as the sail training ship KRUZENSHTERN. Before she was sold to England in 1932 as stationary training ship and renamed ARETHUSA, the PEKING passed Cape Horn 34 times, which is respected among seafarers because of its often stormy weather. In 1975 the four-master, renamed PEKING, was sold to the USA to become a museum ship near the Brooklyn Bridge in Manhattan. There the old ship quietly rusted away until 2016 due to the lack of maintenance. -Af ter returning to Germany in very poor condition in 2017 with the dock ship COMBI DOCK III, the PEKING was meticulously restored in the Peters Shipyard in Wewelsfleth to the condition she was in as a cargo sailing ship at the end of the 1920s.
    [Show full text]
  • A Primer on Sailing the Lido 14 Down Wind
    A Primer on Sailing the Lido 14 Downwind by John Papadopoulos A search of most any sailing library will turn up volumes on quickly compare the angle of the wind with the angle of the how to sail well upwind and perhaps similar amounts of on how main sail so that sail trimming changes can be done to sail downwind with a spinnaker. You probably won’t find any quickly and accurately. There is a long-standing joke in information about sailing dead downwind with a main sail and a the Lido14 class about not needing a mast head wind jib on a whisker pole. This article is intended to fill that gap. indicator because one can simply use the indicator of a nearby boat. In fact looking at the wind indicators on First take a simple test. nearby boats can be useful, especially in trying to judge if you are in the bad are of a boat behind you though you Ask yourself where your team spends most its time looking have to know that a wind indicator shows apparent wind when sailing dead downwind. direction and dirty air travels along the direction of the true wind. However depending on the indicators of other Many Lido 14 racers simply sail dead downwind sailing to the boats is simply ignoring the fact that you need you own wind they find themselves at that moment. It has often been steady answer without having to look around. Some observed that when a known “fast” Lido 14 team passes a sailors are able to use tell tales on the shrouds as wind bunch of such boats, many of those being passed don’t react direction indicators however they are generally harder to at all or only react defensively by initiating a luffing maneuver read.
    [Show full text]
  • Stephens Forward Pilothouse M/Y – CHINTA MANIS
    Stephens Forward Pilothouse M/Y – CHINTA MANIS Make: Stephens Boat Name: CHINTA Model: Forward Pilothouse M/Y MANIS Length: 86 ft Hull Material: Aluminum Price: $ 490,000 Draft: 6 ft 8 in Year: 1975 Number of Engines: 2 Location: Falmouth, MA, United Fuel Type: Diesel States Wellington Yacht Partners One Maritime Drive, Portsmouth, RI 02871, United States Tel: 401-307-4836 Fax: (401) 683-6075 [email protected] http://www.yachtworld.com/wellington CHINTA MANIS Heavily constructed to extremely high standards by Stephens Marine of Stockton, California, CHINTA MANIS is a true oceangoing motor yacht with many of the attributes of a small ship. With a 4,000 mile range, she has crossed the Atlantic twice and the Pacific once and has cruised the Mediterranean, Caribbean, Bahamas, Alaska, French Polynesia, Fiji and New Caledonia. Her stately lines and seagoing appearance stand out in any port she visits. CHINTA MANIS’s layout features spacious accommodations for owners, guests and crew. There are also exceptional spaces on the aft deck, the sun deck and in the salon and pilothouse for group gatherings. Anyone seeking a well-maintained, long-range motor yacht of unique character would be well advised to have a look at CHINTA MANIS. Measurements Cruising Speed: 10 kn Displacement: 168000 Max Speed: 14 kn lb LOA: 86 ft Windlass: Electric Windlass Length on Deck: 86 ft Fuel Tanks Capacity: 6200 Beam: 20 ft 6 in gal Min. Draft: 6 ft 8 in Fresh Water Tanks Capacity: 1000 Max Draft: 6 ft 8 in gal Holding Tank Capacity: 3000 gal Number of single
    [Show full text]
  • Glossary of Terms
    Glossary of Terms Below are new words for our Glossary of Terms based on AB Barlow’s activities the last couple of weeks. To see all the terms from AB Barlow’s past activities, please scroll down. Battle of Cape St. Vincent – one of the first battles of the Anglo-Spanish War (1796-1808). The battle was a decisive English victory and saw four Spanish ships of the line captured by the British; two by Horatio Nelson Battle of Flamborough Head – a battle fought during the American War of Independence during which Captain John Paul Jones captured the British frigate Serapis even as his own ship, Bonhomme Richard, sank out from under him Boarding – the act of sending sailors or soldiers from one’s own ship to an enemy ship for the purpose of capturing the other vessel. In modern context, boarding can also occur for more peaceful purposes such as a safety or customs inspection Brig – a ship with two masts, both carrying square sails. Also, a jail located on board a ship Cutting Out – the act of attacking a ship from small boats filled with sailors or marines. Often used as a surprise tactic Fighting Top – a platform part way up a ship’s mast used as a firing position by sharpshooters during a naval engagement First-Rate – the largest warships in the now-obsolete Royal Navy ranking system. Generally, first-rates mounted around 100 carriage guns Frigate – a small, fast warship; usually built for maneuverability and speed over firepower Gangway – traditionally, a narrow passage connecting a ship’s quarterdeck and forecastle.
    [Show full text]
  • Glossary of Nautical Terms the Maritime World Has a Language of Its Own
    Glossary of Nautical Terms The maritime world has a language of its own. It may seem silly to use special terms instead of simply using one that we use for the same thing shore side, but it actually serves a practical purpose. For example, why not just call a galley a kitchen; it’s just a place where you cook food, right? Not exactly, in a kitchen you can leave pot of hot soup on the counter and, barring some geological event, it will still be there when you get back. In a galley, it is more likely to be all over the deck upon return. Using the proper terminology aboard a vessel helps to enforce the mindset that the maritime environment is different from that on shore and therefore, demands a different code of conduct. Objects: Bit: Two adjacent posts used for mooring or making a line fast to ​ Bollard: A single post used for mooring or making a line fast to ​ Boom: (1) Horizontal spar attached to the foot of a sail; (2) A spar used for lifting such as ​ on a crane or davit Bow: The forward end of the vessel ​ *Bowsprit: Spar protruding from the bow of a sailing vessel used for the attachment of the ​ headsails Bulkhead: A vertical partition inside a vessel ​ Bulwark: A partition extending above the weather deck of a vessel used to prevent seas ​ from washing over and keep objects and personnel from going overboard Capstan: Deck winch, usually configured vertically, used for hauling in lines See ​ Windlass. Ceiling: Planking on the interior sides the hull used for separating internal space from the ​ frame bays; in some cases used to increase hull stiffness to prevent hogging particularly in wood vessels (Hogging is the sagging of the vessel towards the bow and stern due to lack of floatation from the narrowing of the hull.
    [Show full text]