Automated Optical Disc Duplication & Printing System

5c 8 Installing the Printer Driver (Mac) Setup Utility. via the Printer Add the printer 2.0 Cable. your beige USB your PC with Publisher to Connect the Publishing a Disc .Click 2. Open the Printer Setup Utility located in the 1. Congratulations, you are now ready to start Printing discs! • • • again. from the list of available printers. Click Applications - Utilities folder. Primera's online Knowledgebase at www.primera.com/knowledgebase.html. For help with problems printing discs using a PC or Macintosh please visit Manual. the User’s For on printing a disc using Macintosh refer to section 4 in Instructions Manual. User’s For on printing a disc using PC refer to section 3 in the Instructions Add . Select the Disc Publisher PRO Add 6 7 • • • • • Installing Ink Cartridges Aligning the Cartridges first time. to align the cartridge before you print for using a Mac If you are you to align the cartridge. If you are using a PC If you are Note: Close the Publisher's front cover. to the cartridge covers. holder. The cartridge labels are color coded monochrome black in the left cartridge in place. Insert the color right holder, opper end first and snap the cartridge cover Insert the ink cartridges into carrier, c COPPER AREA! DO NOT TOUCH THE print head. covering the cartridge's Slowly remove the tape from its packaging. Remove each ink cartridge position. to the load move the Ink Cartridge Carrier Button on the top of Publisher to With the cover open, press Cartridge An alignment print is required time every disc in the bin for this alignment. sure therecartridges. Make is an unprinted will always prompt you to align the you install a new cartridge. The software the Installer will prompt you will be prompted P/N 510920-011507 Duplication & Printing System © 2007 All rights reserved Duplication & Printing System Automated Optical Disc Automated Optical Disc AUTOPRINTER TM

Quick Start 1 Unpack Your Publisher 4 Loading Media (Discs) • Optical Disc Publisher NOTE: Your Publisher can print directly onto virtually any • Gray Plastic Input and Output Bins brand of inkjet printable-surface CD/DVD media. Open Cover • Power Cord Due to the wide variety of printable-surface CD/DVD • One Three-Color (CMY) Ink Cartridge media, you may find that certain brands of discs provide • One Monochrome Black Ink Cartridge higher print quality than others. For maximum print • QuickStart Installer Disc (for use with both quality, use CD/DVD media authorized by Primera. CD-R and DVD-R models) Refer to the following steps when loading discs in • USB 2.0 Interface Cable (Beige) to the Publisher: • Warranty Card • • This Operator's Manual, Quick Start Guide Open the front cover of the Publisher and Other Printed Information • The Publisher will automatically position the • Load the Input Bin (the bin located on the Save the carton and packing materials. They cartridge carrier and Robotic Disc Transporter right-hand side of the Publisher) with up to will come in handy later if you ever need to to the center position allowing for easy access 50 blank discs and place the bins on the transport the Publisher and/or any of its parts to the bins. mounting pegs. and accessories.

5a Installing the Printer Driver (Windows XP)

2 Installing the Software Connect the Publisher to your PC with your beige USB 2.0 Cable. After a few moments, Windows will tell you it has found new hardware PC Mac and is looking for software to install it. 1. Place the Installer CD in your 1. Insert the Bravo Select "Install the software automatically" and follow through the wizard to CDRom Drive. The Installer Installation CD-ROM in complete the installation. application will automatical- your system's CD-ROM ly launch in a few moments. drive. 2. Click Standard Install to 2. Double-click the begin the installation. You CD-ROM icon. may follow either the steps shown in this 3. Double-click on the Disc Publisher Quick Start or the steps shown in the installer Installer.mpkg file icon. Follow the on-screen to complete the installation. instructions. Note: If the Installer does not start, open My Computer on your desktop. Double-click the icon of the appropriate CD drive containing the Software Installer disc. Double-click Installer.exe.

You will be prompted that the software has not passed Windows Logo Testing. You must click Continue Anyway to finish the installation. 3 Applying Power

Important! Be sure you have removed the packing 5b Installing the Printer Driver (Windows Vista) tape and cardboard shipping insert before applying power. Click the "Install Driver" button when prompted to • Locate the power cord supplied with your do so by the installation disc. Publisher. Files will begin to copy to your hard drive. • Plug the adapter into a surge protected outlet, and plug the power plug into the power port You will be prompted that Windows can't verify the on the rear panel of the Publisher. publisher of this driver software. Click Install the • Turn on the power switch. Wait for the LED driver software anyway. lights to stop flashing (30 seconds). Finally, connect the Publisher to your PC with your beige USB 2.0 Cable.