This lot catalog is subject to changes.

Number Description Quantity 511 Misc. aluminum bar stock. 1 512 Flood light on stand. 1 513 Steel table. 1 514 Hydraulic power pack, Baldor hydraulic power pack, 1.5 1 HP, 208/230/460 volt, 1PH, condition is unknown. 515 Enerpac hydraulic power pack, parts only. 1 516 Stanley shop vac, 4 hp. Includes shop vac. 1 517 Enerpac hydraulic power pack, model PUD 1101, s/n 1 03804C, 115 volt, condition is unknown. 518 table, 20"D x 96"L x 36"H. 304 stainless 1 steel. 519 Aluminum bar stock, 12 foot Length, (12) bars per bundle, 1 2 1/2“ x 2 1/2“, 6061/T6511H, , specifications: ASTMB221, MS - QQ - A -200 /8, ASMESB221, IS-AUB, new in 10/10/2018, one bundle per tag.

520 Steel plates, 3 pcs., 1-1/2x30x60. 1 521 Whiteboard, 36" x 48" on rolling base. 1 522 Various alum bar drops. 1 523 Hydraulic pump, labeled as out of service. 1 524 Floor striper, users paint spray cans. 1 525 Hydraulic hose cart. Shop built, mounted on 4 casters. 1 526 (2) Mitutoyo digital bore , .7-1.4" code 511-104, 1 incomplete, 511-106 2-4" incomplete, both are fair condition. 527 Tool box on casters, black in color., 4 drawer. 1 529 Electrical bar strut, assorted lot. 1 530 8" caliper, digital, with case, unknown brand name. 1 531 Starrett dial caliper, model 1202, 8" with case. 1 532 (2) Dura Cal Swiss made digital caliper, 6", English and 1 Metric, with case. 533 Vacmaster shop vac, 3 hp. 1 536 Aluminum bar stock, 12 foot Length, (12) bars per bundle, 1 2 1/2“ x 2 1/2“, 6061/T6511H, mill finish, specifications: ASTMB221, MS - QQ - A -200 /8, ASMESB221, IS-AUB, new in 10/10/2018, one bundle per tag.

537 Command System II Dynamometer, adaptive drawbar, LED 1 readout, 0-10000 lbs capacity. 538 Mitutoyo caliper, 3"-4", model 343-353, 1 .00005 inch, with case. 539 Peacock dial indicator, .001"-2", 20-336, box. 1 540 Mitutoyo disc mic 1-2" .001", 0-1" .001", 169-103, no 2 cases. This lot catalog is subject to changes.

544 Aluminum bar stock, 12 foot Length, (12) bars per bundle, 1 2 1/2“ x 2 1/2“, 6061/T6511H, mill finish, specifications: ASTMB221, MS - QQ - A -200 /8, ASMESB221, IS-AUB, new in 10/10/2018, one bundle per tag.

545 Thread rod, (3) bundles. 1 546 Flat bar. 1 547 3/4" cold roll, (7) pcs, 12' each. 1 548 Misc. conduit, used. 1 549 Misc. conduit, new and used. 1 550 Conduit couplings. 1 551 PVC and fittings. 1 554 Aluminum bar stock, 12 foot Length, (12) bars per bundle, 1 2 1/2“ x 2 1/2“, 6061/T6511H, mill finish, specifications: ASTMB221, MS - QQ - A -200 /8, ASMESB221, IS-AUB, new in 10/10/2018, one bundle per tag.

555 UEI CO2 CO tester. 1 556 Open 1 557 New Mitutoyo 8" to 9" micrometer, .0001", C/N 103-223, 1 standard and case. Bennett Machine scribed on the frame.

558 New Mitutoyo , code 201-152, 1-2", dial, with 1 box. 559 Lift eye. 1 560 Mitutoyo digital depth micrometer, DMC 100-150MX, C/N 1 329-250-30, 0-150 mm, complete with case. 561

(2) Mitutoyo dial bore gauge, code 511-105, 1.4-2.5", 1 incomplete, with cases.

562 Hydraulic jack. 1 563 Hydraulic jack. 1 564 Hydraulic jack. 1 565 Hydraulic jack. 1 566 Aluminum bar stock. 1 567 Black nitrile gloves. 1 568 Mitutoyo 2"-3" digital disc micrometer, model 369-713- 1 30, .00005, with case. 569 (2) Mitutoyo dial bore gauge, code 511-105, 1.4-2.5", 1 incomplete, with cases. 570 Flashlights. 1 571 Chain. 1 572 Mitutoyo snap gauge 1-2", code number 201-152, no case. 1

573 Chain. 1 574 Mitutoyo digital micrometer 75-100mm, code 293-233-30, 1 with case. This lot catalog is subject to changes.

575 (2) Mitutoyo digital bore gauge, code 511-106, 2-4", 1 incomplete, with cases. 576 18"" pipe . 1 577 24"" pipe wrench. 1 578 Mitutoyo Micrometer set, 1" to 6", various models, with 1 standards, wooden box. 579 . 1 580 Aluminum bar stock, 12' length, (12) bars per bundle, 2 1 1/2“ x 2 1/2“, 6061/T6511H, mill finish, specifications: ASTMB221, MS - QQ - A -200 /8, ASMESB221, IS-AUB, new in 10/10/2018, one bundle per tag. 581 Mitutoyo micrometer 12-16", code 104-152, needs repair, 1 wooden box. 582 Starrett dial caliper 12", catalog number 1202, with case. 1

583 GPSB Gauge pin set, 4 drawers, class Z, .061-.075", 1 approximately 450-500 piece set, missing a limited few, wooden cabinet. 584 (2) Mitutoyo deep throat , code 118-???, 0-6", 1 no case, older. 585 (2) Mitutoyo bore gauge, code 511-106, 2-4" incomplete, 1 with cases. 586 Wright Tool torque wrench. 4477, torque handle has been 1 taped. 587 Snap-on torque wrench, 175 ft/lbs, 16" with case. 1 588 Hexagon, s/n 32378-2-5732, 7525-1802UC. Rhomer bar. 1 589 Vernier caliper, 24", English, metric, no brand name, needs 1 minor repair, wooden case. 590 (36) Deltronic pin gages, class X standards, various sizes, in 1 plastic boxes. 591 Vermont gauge pins, GPSYF, incomplete (16) pieces, .916 is 1 the largest. 592 Mitutoyo dial bore gauge, 2923S-10, up to 12", 1 incomplete, case. 593 Mitutoyo micrometer 12-16" code 104-152, with 1 standards, wooden box. 594 Mitutoyo micrometer, (93) pieces 0-1", 1-2", 2-3", in 1 case, near new, code 103-922-99. 595 Aluminum bar stock, 12 foot Length, (12) bars per bundle, 1 2 1/2“ x 2 1/2“, 6061/T6511H, mill finish, specifications: ASTMB221, MS - QQ - A -200 /8, ASMESB221, IS-AUB, new in 10/10/2018, one bundle per tag.

596 Mitutoyo dial inside caliper, code 209-354, .80-1.60", in 1 box, near new. 597 Mitutoyo dial Bore gauge, 6-10", code 511-189, 1 incomplete, in case. This lot catalog is subject to changes.

598 (2) Mitutoyo dial indicator, new in box, code ACZJ73- 1 2923S-10, .0001". 599 Mitutoyo dial bore, code 526-123, range .4-.7" needs 1 repair, in case. 600 Mitutoyo dial bore, 10-16", code 511-183, incomplete, 1 with case. 601 Mitutoyo dial bore gauge, .7-1.4", code 511-104N, 1 incomplete, needs repair, .0001". 602 Mitutoyo dial bore gauge, code 511-104, .7-1.4", no case, 1 .0001". 603 Peacock dial bore gauge, model unknown, 6-10" 1 incomplete, includes MItutoyo gauge box, incomplete. 604 Mitutoyo dial bore gauge, code 511-105, 1.4-2.5", .0001", 1 no case. 605 Aluminum bar stock, 12' length, (12) bars per bundle, 2 1 1/2“ x 2 1/2“, 6061/T6511H, mill finish, specifications: ASTMB221, MS - QQ - A -200 /8, ASMESB221, IS-AUB, new in 10/10/2018, one bundle per tag. 606 Mitutoyo Absolute digital bore 10-16", code 511-189, 1 incomplete, with case. 607 Sunnen dial bore gauge, GA-4000 series, 3 points. 1 608 (2) Mitutoyo dial bore gauge, nearly complete, code 511- 1 417, metric 50-150mm, 2109S-10, in cases. 609 (2) Mitutoyo dial bore gauge, code 511-104, .7-1.4", 1 .0001", in wooden case. 610 (1) Mitutoyo dial bore gauge, code 511-753, 2-6", 1uM, in 1 case, missing only few pieces. 611 (4) Phase 2, dial indicators, .001", no cases. 1 612 (3) Mitutoyo Absolute digital bore gauge, English and 1 Metric, C11-2EXB, code 543-392-B. 613 (3) Mitutoyo Absolute digital bore gauge, standard and 1 metric, code 543-392B, .5"-.00005". 614 (2) Mitutoyo bore gauges (1) Absolute digital metric and 1 standard code 543-392B size .5-.00005", (1) dial type, code 511-205, size .4-.74. 615 New Mitutoyo dial bore gauge, model 511-733, 2-6", 1 2109S-10, fully jeweled, 1 uM, in box. 616 Aluminum bar stock, 12' length, (12) bars per bundle, 2 1 1/2“ x 2 1/2“, 6061/T6511H, mill finish, specifications: ASTMB221, MS - QQ - A -200 /8, ASMESB221, IS-AUB, new in 10/10/2018, one bundle per tag. 617 (2) Mitutoyo dial bore gauge, code 511-214 and 526-104 1 .24"-.4", .4"-.7", with cases, missing only a few pieces.

618 (2) Mitutoyo dial bore gauge, code 511-206, .4-.72", 511- 1 205 .4-.74", missing only a few pieces, cases. This lot catalog is subject to changes.

619 (2) Mitutoyo dial bore gauge, code 511-205, size .4-.74", 1 .0001", missing only a few pieces. 620 Klein Tool Command C6W4-0006, CAT 50 test bar, 12" 1 length, in wooden box. 621 Mitutoyo dial bore gauge, code 511-205, .4-.74", with 1 case, .0001", missing only a few pieces. 622 2016 Iscar Bayo-T-ream, RM-BNT9-5D-1.25C, incomplete. 1

623 Mitutoyo dial bore gauge, code 511-104, .7-1.4", tolerance 1 .0001", no case, needs repair. 624 Dial indicators for parts. 1 625 Gauge pins assorted sizes. 1 626 Pin gauges. 1 627 Pin gauges. 1 628

Gauge pins.

1 629 Gauge pins, new. 1 630 Gauge pins, new. 1 631 Assorted GO-No gauges, various sixes and types. 1 632 Assorted precision instruments, , radius gauges, 1 thread gauge, mixed lot. 633 Precision components assorted measuring balls. 1 Incomplete set. 634 Precision components assorted measuring balls. 1 Incomplete set. 635 Phase 2 height block set, 81 piece, missing approximately 1 7 pieces. 636 (4) Mitutoyo dial indicators, various models assorted sizes, 1 (1) anti magnetic 513-403, .0001", (1) 24S .001", (1) 2356- 50 .0001"-.025", (1) 2923-10 .0001". 637 (2) Dial indicators, Enco and Phase 2. 1 638 (7) Dial indicators, various sizes and types. 1 639 New Mitutoyo micrometers, code 103-922-99, (3) 0-1", 1- 1 2", 2-3", 0001", in case. 640 (4) Assorted rasps, various sizes. 1 641 Mitutoyo (3) pc micrometer set, 1", 2", 3", (2) sets. 1 642 Mitutoyo bore gauge, (2) pc. 1 643 Mitutoyo micrometer, code 103-922, 0-1", 1-2", 2-3", with 1 case, (2) standards. Near new appearance. 644 Starrett Sunnen horizontal indicator gauge, .0001", custom 1 . 645 Mitutoyo dial indicator code 2923-10, 6 Jewell, .0001", 1 mounted fixture. 646 Letter and number stamps, various sizes and conditions. 1

647 Mitutoyo Micrometer set, code 103-922, 0-1", 1-2", 2-3", 1 .0001", in case, near new appearance. This lot catalog is subject to changes.

648 New Mitutoyo caliper type micrometers, code 143-123, 2- 1 3", .001", in plastic and case, box. 649 Mitutoyo inside dial caliper, code 209-702, .0005", with 1 case, .4-1.2". 650 New Mitutoyo dial caliper inside gauge, code 209-354, 1 .0005", in case and box. 652 New Mitutoyo dial bore gauge, code 511-206 and 2923S- 1 10 indicator, .4"-.74", .0001", in case and boxes, has not been assembled. 653 New Mitutoyo dial bore gauge, code 511-206 and 2923S- 1 10 indicator, .4"-.74", .0001", in case and boxes, has not been assembled. 654 Mitutoyo micrometer, code 103-922, 0-1", 1-2", 2-3", 1 .0001", in case, near new appearance. 655 (2) New Phase II dial indicators, stock number 900-102, 1 range 0-1", graduation .001". 656 (2) Mitutoyo dial bore gauges, 2923S-10, .0001", code 511- 1 104, missing pieces, in cases. 657 Mitutoyo dial bore gauge, code 511-106, 2-4", .0001", 1 missing few pieces, in cases. 658 Mitutoyo micrometer, code 104-201, 12-18", standards, 1 wooden box. 659 Mitutoyo depth micrometer, code 129-132, DMC4-6", 1 with case. 660 Scheer Tumico 7" to 8" blade micrometer, wooden case. 1

661 (2) Mitutoyo Dial bore gauge, code 511-105, range 1.4'- 1 2.5", .0001", (1) near complete, (1) is missing pieces. 662 Mitutoyo caliper type micrometer, code 143-122, 1-2", 1 .001", case. 663 (3) Mitutoyo disc micrometers (2) 0-1", 0-1" code 169- 1 103, (1)1"- 2" 169-204, no case. 664 Mitutoyo snap gauge, code 201-156, 5-6", no case, 1 tolerance .00025". 665 Mitutoyo digital outside caliper type micrometer, code 1 343-351, range 1-2", .00005", with case, appears to be near new. 666 (2) Mitutoyo dial bore gauge, code 511-106, 2-4", .0001", 1 missing few pieces, in cases. 667 (2) Parallel blocks, 246 blocks. 1 670 (2) Mitutoyo dial bore gauge, code 511-105, 1.4"-2.5", 1 .0001", incomplete. 671 Mitutoyo 0-1"outside caliper micrometer, model 143-121, 1 .001" in case. 672 Starrett 0 to 1" screw thread micrometer, model 575, with 1 case. This lot catalog is subject to changes.

673 (2) Mitutoyo dial bore gauge code 511-107, 2-6", .0001", 1 number 29235-10. 674 (2) Mitutoyo dial bore gauge 511-731, .7-1.4" 511-105, 1 1.4"-2.5", missing numerous components. 675 (2) Mitutoyo dial bore gauge, code 511-104, .7-1.4", 1 missing numerous components. 676

(4) Master ring gauges.

1 677 Mitutoyo micrometer set, 103-235, 103-136, 103-137, 0- 1 1", 1-2", 2-3", .0001", in case. 678 (2) Mitutoyo dial bore gauge, code 511-107 2-6”, .0001”, 1 code 511-104, .7-1.4”, with case. 679 (2) Mitutoyo Dial bore gauge, code 511-104, .7-1.4. 1 680 Mitutoyo micrometer, 103-221A, 6"-7", with standard in 1 case. 681 (2) Mitutoyo dial bore gauge, code 511-105 1.4"-2.5" 1 .0001". 682 (2) Mitutoyo dial bore gauge, code 511-106, 2-4", code 1 511-105 1.4"- 2.5". 683 (2) Mitutoyo dial bore gauge, code 511-106 2-4" .0001", 1 511-105 1.4"-2.5". 684 (2) Mitutoyo dial bore gauge, code 511-105, 1.4"-2.5" 1 .0001". 685 (2) Mitutoyo dial bore gauge, code 511-731, .7-1.4". 1 686 Mitutoyo dial bore gauge, code 511-104.7-1.4". 1 687 Mitutoyo dial bore gauge, code 511-105 1.4"-2.5", code 1 number 511-104 7"-1.4". 688 (1) Mitutoyo dial bore gauge, code 511-105, 1.4"-2.5", (1) 1 empty case. 689 Mitutoyo dial bore gauge, code 511-731 .7-1.4". 1 690 (2) Mitutoyo dial bore gauge, code 511-731, .7-1.4". 1 691 Mitutoyo dial bore gauge, code 511-731, .7-1.4" .0001". 1 692 (2) Mitutoyo dial bore gauge, code 511-731, .7-1.4" 1 .0001". 693 Mitutoyo dial bore gauge, code 511-732 1.4-2.5", code 511-1 731 .7-1.4". 694 (2) Mitutoyo dial bore gauge, code 511-732 1.4"-2.5". 1 695 Mitutoyo depth micrometer, code 129-132, up to 8". 1 696 Mitutoyo dial bore gauge, code 511-104, .7-1.4", .0001", 1 code 511-732, 1.4-2.5". 697 Mitutoyo dial bore gauge, code 511-104, .7-1.4". 1 698 (5) WLB tapered , wooden box. 1 699 2013 CAS Corp hanging scale, model IE-500E, s/n 1 1E031300569, 500 lbs., with case. 700

(2) Mitutoyo dial bore gauge, code 511-107, 2-6", 1 .0001", nearly complete.

701 Mitutoyo rod standards, 6"-11". 1 702 Meyers gauge pin set, 4-drawer, .626 to 1.000. 1 This lot catalog is subject to changes.

703 (3) pin gauges, (1) .251-.500, (1) .501-.625, (1) .051-.250, 1 these are not complete. 704 Gauge handles for 60 N060, (2) boxes, mixed lot. 1 705 Go No plug gauges, mixed lot. 1 706 Number and letter stamps, various types and sizes. 1 707 Go No plug gauge, assorted. 1 708

Go No plug gauge, assorted.

1 709

Go No plug gauge, assorted.

1 710

Go No plug gauge, assorted.

1 711

Go No plug gauge, assorted.

1 712 60 N060 gauges, (2) boxes. 1 713 Go No plug gauge, assorted, 60 N060 gauges, (2) box. 1 714 Radius V block. 1 715 Assorted torque , (1) is for parts. 1 716 Assorted lot. 1 717 Gayer ID groove gauge, 101-214, 130-180mm, wooden 1 box. 718 (2) Mitutoyo dial bore gauge, (1) 511-731, .7-1.4" .0001" 1 (1) (1) 511-107, 2-6" .0001", missing various components.

719 (2) Federal Bowers ring gauges, 4.99992 ins 126.998 mm, 1 XT 7" ring. 720 (4) Mitutoyo bore gauge head, various sizes. 1 721 (3) Phase 2 Radius gauges, various sizes and types. 1 722 Starrett telescoping and small hole gauge. 1 723 Bore gauge centers (2) packs. 1 724 Reef gauge blade. 1 725 Mitutoyo wooden box, empty. 1 726 (2) reef gauges. 1 727 Assorted Go No Go plug gauges. 1 728 Gauge bar, 18 inch length. 1 729 Hold down blocks. 1 730 Parallel block with base. 1 731 Precision shims. 1 732 (5) New Mitutoyo depth micrometer rods. 1 733 (2) Custom built work platforms, sizes are: 10' x 5'x2' and 1 15'x5'x2'. 734 (1) Work platform, 11' wide, 5' deep, 2' tall with steps. 1 735 Thread gauges, metric and English, various sizes. 1 737 (2) bars. 1 738 (1) Work platform, 10' wide, 5' deep, 2' tall includes steel 1 tables. 739 Work platforms, odd sizes, (1) 10' wide, 5' deep, 13" tall, 1 (1) Triangle 10' wide 5' max width, 13" tall, (1) 7'x3' cat walk. 740 (3) Micrometers, 2 to 3 inch, 0 to 1 inch, 1 to 2 inch no 1 case. This lot catalog is subject to changes.

741 Mitutoyo depth micrometer, only one is complete. 1 742 Gauge blocks. 1 743 Mitutoyo 18", code 180-102, no case. 1

744 Misc. mill cutters, assorted light, inserts, carbide bits. 1 745 Cleaning supplies includes full case of floor sweep, 3 1 gallons zip professional heavy duty butyl degreaser , two orange safety cones, several dust pans spray bottles brushes. 746 Custom rolling cabinets , diamond plate box on 5" casters 1 with hinged lid 80" wide by 32" deep by 38" tall on casters.

747 Cleaning supplies rolling shop caddy, neoprene wheels 1 swivel, contains two shelves and hanging areas. 748

Custom stainless steel table legs available to cut to size 1 79"" wide by 24"" deep by up to 67"" tall.

749 Dial indicator magnetic bases, (4) pcs. 1 750 (8) assorted thread gauges, various sizes and types. 1 751

Bore gauge.

1 752

Aluminum brackets for plastic tote bins.

1 753 Banding equipment, manual style banding crimpers, metal 1 banding clips, tension ratchets, banding cart, with vinyl band corner protectors. 754 Brown & Sharpe 6"" and Mitutoyo 6” digital caliper. 1

755

24"" Fowler digital caliper.

1 756

24"" Absolute Digimatic caliper.

1 757

40"" Mitutoyo Digimatic caliper.

1 759 Pump, model number N267-F, manufacture date April 1 2016, product number 267-0002, 115 V, 10.4 amp, half horsepower, thermally protected, cast iron housing. 761 Work platforms, odd sizes, (1) 10' wide, 5' deep, 13" 1 height, (1) triangle 10' wide, max 5' deep, 13" heights includes rail, (2) 10' wide, 3' deep, 13" height with step. 762 Work Platforms: (1) 15' length, 5' deep, 32" height, (1) 12' 1 length, 5' deep, 32" height with steel table and steps.

763 6" depth gauge, damaged. 1 765 (2) Work platforms: 10' length, 5" deep, 32" height. 1 766 Work platforms: (1) 8' length, 10' 4" deep, 13" height, (1) 1 8' x 8' x 13", (1) 9' x 3' x 13" one step. 767 New Kuroda HSK A63-30-150VGN tool holder. 1 768 Work platforms: (1) 10' length, 5' deep, 13" height, (1) 1 Triangle 10' length, 5' max deep, 13" height, (1) 9'5" length, 3' deep, 13" tall. 769 Work Platforms: (1) 10' length, 5' deep, 16" tall with steel 1 table (1) 10' length, 3'3" deep, 16" tall with step. This lot catalog is subject to changes.

773 Snap-on 600 ft lb torque wrench. 1 774 150 lb. torque wrench. 1 775 OEM Tools 1/2"" drive torque wrench 10-150 ft lb. 1 776 OEM Tools 1/2"" drive torque wrench 10-150 ft lb. 1 777 OEM Tools 1/2"" drive torque wrench 10-150 ft lb. 1 778 OEM Tools 1/2"" drive torque wrench 10-150 ft lb. 1 779 OEM Tools 1/2"" drive torque wrench 10-150 ft lb. 1 780 Torque wrench, OEM half-inch drive 10 to 150 foot 1 pounds. 781 Wright 1/2"" drive torque wrench. 1 782 Wright 1/2"" drive torque wrench. 1 783 Wright 1/2"" drive torque wrench. 1 784 Snap-on torque wrench 40 foot pound, tqfr50A. 1 785 Snap-on TQFR 50A torque wrench. 1 786 Wright 3447 torque wrench. 1 787 Wright 3447 torque wrench. 1 788 (4) misc. torque wrenches. 1 789 (2) misc. torque wrenches. 1 790 Ingersoll Rand 1/2" drive air torque wrench, 150 ft/lbs. 1 791 SK 3/8" torques wrench, 74530. 1 792 Snap-on 3/8" torque wrench, 75 ft lb. 1 793 Snap-on 3/8" torque wrench, TQFR1008. 1 794 Torque wrench. 1 795 Ingersoll Rand 3/4"" impact wrench. 1 796 Misc. Milwaukee handles and guards. 1 797 Honsa descaler, air. 1 798 (3) air ratchet torque wrench, (2)-3/8" drive, (1)-1/2" 1 drive, CP and Cleco. 799 (2) Dynafile II, model 40352. blade grinder 05036. 1 800 (2) Refractometer. 1 801 (2) CP grinder. 1 802 Work Platforms: (1) 10' length, 4'5" deep, 14" height, 1 steps (1) 10' length, 5' deep, 13" height with steps, (1) 10' length, 5' deep, 14" height. 803 (2) Panasonic 3/8" impact wrench 10.8V., no batteries or 1 charger. 804 Honsa descaler, pneumatic. 1 805 (2) Blue Point wrenches, 3/8" drive impact, pneumatic. 1 806 Work Platforms: (1) 10" length 4' deep 13" height with 2 1 upper steps, (1) 10' length, 5' deep, 18' height with steel table. 807 (2) air palm nailer. 1 808 (2) Dynafile blade grinder model 40352. 1 809 (2) 3/8"" drive air ratchet and impact wrench. 1 This lot catalog is subject to changes.

810 Work Platforms: (1) 8' 8" length, 2'6" deep, 13" height 1 with steps, (1) 10' x 10' x 12" with steps, (1) 5' length, 2' 6" deep 13" height, with step, (1) 10' length, 5' width, 15" height with steel table. 811 Stanley air torque wrench 1/2"" drive. 1 812 Work Platforms: (2) 10' length, 5' deep, 13" height. 1 813 (2) Dynabrade pneumatic grinder, model 18100. 1 814 3/8"" drive air ratchet driver. 1 815 (1) 3/8" drive air palm ratchet, (1) Dynafile. 1 816 Rotor tool torque wrench, pneumatic. 1 817 1" drive torque wrench, air. 1 818 (2) Pneumatic ratchet wrenches. 1 819 (2) Dynabrage grinder model 4035. 1 820 Misc pneumatic nozzles. 1 821 1/2"" pneumatic impact wrench. 1 822 Assorted flashlights. 1 823 (2) Dynabrade pneumatic, model 40352. 1 824 (2) Pneumatic ratchet 3/8"" drive. 1 825 Misc. gloves, many are new. 1 826 (2) Pneumatic . 1 827 (1) Dynabrade pneumatic grinder model 40352. 1 828 Misc. pneumatic nozzles. 1 829 Atlas Copco pneumatic impact 3/8""drive. 1 830 Cleco pneumatic impact 1/2"" drive. 1 831 Lathe jaws, (2) sets. 1 832 Thread tape. 1 833 Misc. wrench. 1 834 drill and holder. 1 835 Huot Drill index, up to 1/2", missing many bits. 1 836 (3) Mill cutters, 8". 1 837 (7) Lathe tool holders. 1 838 (7) Lathe tool holders, insert type of cutter. 1 839 (10) 9"" grinding wheels. 1 840 Assorted drill chucks and dead centers. 1 841 Assorted deep sockets, metric. 1 842 Lathe tool holders. 1 843 Misc. air line fittings. 1 844 Assorted lot. 1 845 Drills and holders. 1 846 Huot multi drawer drill cabinet, limited quantity of drill 1 bits. Nearly empty. 847 Assorted carbide mill cutters. 1 848 set. 1 849 Assorted drill bits and end mills. Several are new. 1 850 Assorted chamfer tools. 1 851 Assorted carbide mill cutters. 1 852 Assorted mill cutters. 1 This lot catalog is subject to changes.

853 Assorted drill bits. 1 854 Assorted taps. 1 855 Assorted tool holders, various sizes and condition. 1 856 Assorted inserts, various types and sizes. 1 857 Assorted drill bits. 1 858 Assorted drill bits. 1 859 Assorted taps. 1 860 Assorted drill bits. 1 861 Grip Easy Out kit. 1 862 Open 1 863 Pry bars and , mixed lot. 1 864 Assorted files. 1 866 (2) Fowler 8" dial caliper, Premium .001". 1 867 Starrett 12" dial caliper, 1202, .001", with case. 1 868 Open 1 869 Open 1 870 Brown & Sharpe, 6" digital caliper, Valuline, metric 1 and English. 871 Brown & Sharpe, 6" digital caliper, Valuline, English 1 and metric, with case. 872 Tesa IP 67 digital caliper, 6", 15CM, English and metric, 1 with case. 873 Assorted taps. 1 874 Assorted drill bits. 1 875 APC Battery backups, condition is unknown. 1 876 New Exit sign, light bulbs, mixed lot. 1 877 New soap dispensers. 1 878 Lab test equipment, mixed lot. 1 879 Way cover, uncertain brand name. 1 880 Niigata way cover SPN-63, Z axis, pallet changer side. 1 881 Niigata way cover SPN-50, Z axis. 1 882 Unknown brand name. 1 883 Niiagata way cover, HN80D Z axis. 1 884 Niigata way cover SPN 63, Z axis, spindle side. 1 885 Niigata HN80D, X axis. 1 886 Ergotron LX wall mount system, supports monitor and 1 keyboard, new. 887 Roller chain and repair links. 1 888 Desso laser bar code scanner, new in box. 1 889 IMR gas analyzer, model IMR 1000, SN A2110M28. 1 890 Niigata way cover model SPN 63, Z axis. 1 891 (1) Starrett 12" dial caliper, model 1202, with case. 1 892 Niigata HN80D Z axis. 1 893 Spectroline Optimax Jr., leak detection unit, flashlight, 1 OPX500. 894 Niigata way cover SPN 50, Z axis. 1 895 Weller soldering gun. 1 This lot catalog is subject to changes.

896 Sunnen gauge setting fixture, model CF 502, 0-2", no 1 indicator or gauge. 897 Misc. fixtures. 1 898 (14) 5 gallon pails, for lubricant spindles and gear oil. 1 899 Assorted hydraulic hoses, V belts, air hoses, mixed lot. 1 900 (2) Tesa 6" digital caliper, Dura-Cal IP67, English and 1 metric, case. 901 Lathe soft jaws, various sizes. 1 902 (1) Tesa 6" digital caliper, Dura-Cal, English and metric, 1 case. 903 Brown & Sharpe IP 67, digital 6" caliper, English and 1 metric, in case. 904 Brown & Sharpe IP67, 6" digital caliper, English and 1 metric, case. 905 Brown & Sharpe IP67, 6" digital caliper, English and 1 metric, case. 906 (2) Brown & Sharpe Dura-Cal IP67, 6" English and 1 metric, case. 907 (2) Brown & Sharpe Dura-Cal IP67, 6" digital caliper, 1 English and metric, case. 908 (2) Fowler Premium 8" dial caliper, .001", case. 1 909 Lathe soft jaws, various sizes and types. 1 910 Turret liners, mixed lot. 1 911 (2) Fowler Premium 8" dial caliper, .001", case. 1 912 Gear Wrench torque wrench, 1/2" drive up to 250 ft lb. 1 913 Eaton Vickers Hydraulic power pack, model 1 PSSCA1020V013XX730XXXJXD2XFXWXMNCXX, SN 14L- 118121-02. 914 Unknown brand name 8" digital caliper, English and 1 metric, case. 915 Starrett dial depth caliper, model 450. 1 916 Starrett dial caliper 8", 1202, .001", case. 1 917 Starrett depth dial caliper, model 450, .001", case. 1 918 Niigata table gear SPN63, B axis. 1 919 2015 All Flo Pneumatic diaphragm pump, model A200-NAA-1 SSPE-000 ,s/n 262940. Needs repair. 920 Misc. multi point set wrench for insets. 1 922 Shim stock. 1 923 (4) New Amada blades, 11'6" long x .035 x 1", 1 10/14 teeth. 924 Assorted driver bits, various sizes and type. 1 925 Open 1 926 Calculators. 1 927 Assorted 1/2"" sockets. 1 928 Assorted 1/2"" sockets. 1 929 (5) Swing staplers. 1 930 Open 1 This lot catalog is subject to changes.

931 Misc. paint pens and stapler. 1 932 Chalk line and chalk. 1 933 (2) Cylinder hones and stones. 1 934 Sunnen hone stones. 1 935 Tube cutter. 1 936 First aid cream. 1 937 Ingersoll multi point set wrenches for inserts. 1 938 Tube flaring tool. 1 939 Assorted spring pins, 1/2" x 3". 1 940 Assorted glaze breaker, assorted lot. 1 941 Assorted combination wrenches, mixed lot. 1 942 Assorted 1/2" and 3/8" ratchet and extensions, mixed lot. 1

943 Assorted sockets, various types and brand names. 1 944 (2) Oberon safety gloves, #609, 10" with bags. 1 945 Assorted wire brushes. 1 946 Assorted Mitutoyo 6"" steel rules. 1 947 Open 1 948 Caulk guns. 1 949 Assorted combination wrenches. 1 950 Flashlights. 1 951 Grease gun. 1 952 Chip brushes. 1 953 T handle Allen wrenches. 1 954 Socket driver and breaker wrenches. 1 955 Dead blow . 1 956 Paint pens. 1 957 (5) Swing staplers. 1 958 OPEN 1 959 Allen wrench sets. 1 960 Assorted multi point drivers. 1 961 Assorted supplies, many are new. 1 962 Allen wrench sets. 1 963 Scrapers. 1 964 Misc. hammers and assorted lot. 1 965 Assorted ball peen hammers. 1 966 Files. 1 967 Adjustable clamps. 1 968 OPEN 1 969 Channel lock . 1 970 (5) Swing staplers. 1 971 Assorted T handle Allen wrenches. 1 972 Assorted tools. 1 973 Nut drivers. 1 974 OPEN 1 975 Open 1 976 Misc. tools. 1 This lot catalog is subject to changes.

977 Misc. wrenches. 1 978 Screw drivers. 1 979 Misc. tools. 1 980 Allen wrenches. 1 981 Pliers. 1 982 Socket T wrenches. 1 983 Assorted lot. 1 984 Ear muffs. 1 985 Corner gauge. 1 986 Assorted ball peen hammers. 1 987 Combination wrenches. 1 988 Banding cutters. 1 989 Spanner wrenches. 1 990 (5) Swing staplers. 1 991 Misc. wrenches. 1 992 Misc. picks. 1 993 Wrenches. 1 994 Open 1 995 Panasonic impact, battery and charger. 1 996 Panasonic charger EY LOB1B, new in box. 1 997 (5) Swing staplers. 1 998 T handle Allen wrenches. 1 999 Misc. pliers. 1 1000 (2) Panasonic impact wrenches, batteries and charger. 1 1001 Misc. lot. 1 1002 (7) Panasonic 10.8V battery pack, most are new. 1 1003 Craftsman cordless driver. 1 1004 Misc. screw drivers. 1 1005 Combination wrenches, mixed metric and English. 1 1006 Assorted combination wrenches. 1 1007 Milwaukee 1/2" drill, model 0234 HD, corded. 1 1008 1/4"" drill. 1 1009 Assorted levels. 1 1010 OPEN 1 1011 OPEN 1 1012 Box of Panasonic battery drills for parts. 1 1013 Allen wrenches. 1 1014 OPEN 1 1015 Files. 1 1016 Misc. tools. 1 1017 Misc. tools. 1 1018 Grease gun. 1 1019 Chain cut off. 1 1020 OPEN 1 1021 Misc. wrenches. 1 1022 (2) Staplers. 1 1023 Multi point wrenches, used for inserts. 1 This lot catalog is subject to changes.

1024 OPEN 1 1025 Impact sockets. 1 1026 Open 1 1027 Open 1 1028 Open 1 1029 Assorted lot. 1 1030 Milwaukee 6-1/2" circular , V28, no battery. 1 1031 Dremel tool. 1 1032 Ingersoll Rand 3/4"" air impact. 1 1033 Deburring tools. 1 1034 Assorted types of hammers. 1 1035 Paper roller. 1 1036 Misc. tools. 1 1037 Black & Decker sabre saw. 1 1038 Tape measures. 1 1039 Tin snips. 1 1040 Skil palm sander. 1 1041 OPEN 1 1042 keys. 1 1043 Milwaukee 4-1/2"" electric grinder. 1 1044 DeWalt 8"" electric grinder. 1 1045 New Fastenal ready rod cabinet. 1 1046 (1) Hilman model 3-75-SED, machine mover skate. 1 1047 Open 1 1048 Mr. Coffee coffee pot. 1 1049 (6) Swing staplers. 1 1050 Open 1 1051 Open 1 1052 Open 1 1053 Open 1 1054 Roll of 1/8"" steel cable. 1 1055 (2) wheels. 1 1056 (2) New rotary encoder RAA-60-0012NHC. 1 1057 Chain. 1 1058 Plumbing parts. 1 1059 Eye bolts, many are new. 1 1060 Milwaukee 1/2" cordless drill, battery, charger in case 1 M18. 1061 Milwaukee 1/2" drill, M18, battery and charger, case. 1 1062 Milwaukee tool bag and charger. 1 1063 (2) Milwaukee tool bag and charger. 1 1064 Milwaukee tool bag, M18 M12 charger. 1 1065 (3) Milwaukee battery charger, M12. 1 1066 (3) Milwaukee battery charger, M12. 1 1067 Milwaukee M12 battery charger in bag, new. 1 1068 Milwaukee M12 battery charger in bag, new. 1 1069 Milwaukee M12 volt battery charger in bag, new. 1 This lot catalog is subject to changes.

1070 Milwaukee M12 battery charger in bag, new. 1 1071 Open 1 1072 Open. 1 1073 Milwaukee 1/2"" M18 drill in case with charger. 1 1074 Milwaukee M18 1/2"" drill in case with battery and 1 charger. 1075 Open 1 1076 Misc. tools. 1 1077 Open 1 1078 Misc. tools. 1 1079 Misc. tools. 1 1080 Assorted combination wrenches, English. 1 1081 Assorted ratchet combination wrenches. 1 1082 Assorted tools. 1 1083 Torque end sockets, assorted lot. 1 1084 Open. 1 1085 Assorted sockets and ratchet. 1 1086 3/4"" drive sockets with breaker bar. 1 1087 OPEN 1 1088 3/8" drive impact sockets, assorted sizes. 1 1089 Combination wrenches, assorted sizes. 1 1090 Open 1 1091 OPEN 1 1092 OPEN 1 1093 Combination wrenches, assorted sizes. 1 1094 (2) Torque wrenches. 1 1095 Open 1 1096 Assorted snap rings. 1 1097 Assorted O-rings, various sizes and types. 1 1098 O-ring material. 1 1099 (2) Mitutoyo bore gauge, (1) groove gauge 2.4”-5.4”, (1) 1 groove gauge 3.2”-4.2”. 1100 (2) Mitutoyo dial caliper gauge internal, (1)209-361 ip-65 1 .0005, (1) ip-65 209-356. 1101 Mitutoyo caliper micrometer 2"-3", .001 #143-123. 1 1102 Open 1 1103 Intertest internal dial caliper gauge, (1) 2.4“-3.2“, .001 #76. 1

1104 Verdict dial internal caliper gauge, 1-7/8“ - 2-7/8“, .001. 1 1105 Mitutoyo caliper internal gauge, ip65 #209-361 2.O” -2.8“. 1

1106 Mitutoyo internal caliper gauge, ip65, #209-362, 3.6-5.6”. 1

1107 Mitutoyo dial caliper gauge Internal 209-362, .005, 1.6- 1 2.6”. 1108 Mitutoyo caliper gauge, Internal dial #209-713 1”-2”. 1 This lot catalog is subject to changes.

1109 Mitutoyo caliper gauge, internal dial ip65 #209-354 .8”- 1 1.6”. 1110 Durham pin gauges, .001-.199, .200-.399, .400-.499 and 1 special gages, (4) drawers. 1111 (5) Assorted dial caliper internal gauges. Various 1 conditions. 1112 Intertest internal dial caliper gauge, 2.4-3.2“ , .001. 1 1113 Intertest dial caliper internal gauge, 2.0-2.8” #75, .001". 1 1115 Peacock dial indicator TTC,57-030-000, 0-1”, .001. 1 1116 OPEN 1 1117 Open 1 1119 Mitutoyo 1" to 2" micrometer caliper external, .001", 1 #143-122. 1121 Mitutoyo 1" to 2" micrometer caliper internal. #143-121, 1 .001". 1122 OPEN 1 1124 Assorted pin gauges, parts (2) boxes rods. 1 1125 Starrett dial indicator #655-161, .002-.5mm range, in box. 1

1126 (8) Assorted dial indicators in box.#513-412, (6) analog and 1 1 digital, absolute std and metric. 1128 (2) SPI #14-543-3, -2” hub micrometer. 1 1129 (2) Hub style micrometers 0-1", 2-3”. 1 1130 (1) 0-1” hub micrometer, (1) 1-2” hub micrometer. 1 1131 (1) 0-1” hub micrometer, (1) 2-3” hub micrometer. 1 1132 (1) 0-1” hub micrometer, (1) 1-2 “ hub micrometer. 1 1133 (1) 0-1” hub micrometer, (1) 1-2 “ hub micrometer. 1 1135 (4) Mitutoyo micrometer standards, 167-152,153,154,155, 1 12"-15". 1136 OPEN 1 1137 OPEN 1 1140 Open 1 1142 Mitutoyo micrometer, 2"-3", 1"-2", 1"-2", no case. 1 1143 Mitutoyo micrometer, 1"-2", 2"-3", 2"-3", .0001", code 1 103-115-99. 1145 (3) Mitutoyo micrometer #103-262-99 1-2”, 2-3”, #202- 1 204, 0-1”. 1146 Mitutoyo #103-217 (1) 2-3”, (2) #103-136 1-2”. 1 1147 Mitutoyo micrometers (2) 2-3”, (1)1-2” (1) #103-135 0- 1 1”. 1148 Mitutoyo micrometers (1) 2-3”, (1) 0-1” (2) 1-2”, no case. 1

1149 Mitutoyo micrometers (1) 2-3” 202-210, (1) 0-1”, (1) 2-3", 1 no case. 1150 Mitutoyo micrometer (1) 0-1”, (1) 1-2” , (1) 2-3”, (1) 4-5 “, 1 various models, no case. 1153 Go No Go 60 NO60 gauges, pin type. 1 This lot catalog is subject to changes.

1154 Go No Go 60 NO60 gauges, pin type. 1 1155 Go No Go 60 NO60 gauges, pin type. 1 1156 Mitutoyo SJ-20, non functioning. 1 1157 Go NO Go 60 NO60 gauges, pin type. 1 1158 Go NO Go 60 NO60 gauges, pin type. 1 1159 Thread NO60 gauges, pin type. 1 1160 Mitutoyo snap gauge, 6-7", no indicator. 1 1161 Mitutoyo snap gauge, 8-9”, no indicator. 1 1164 Snap gauge, (2) pcs. #201-153 2-3”, #1000p-2 3/4” - 2” (2) 1 Reef snap gauge. 1166 Open 1 1167 Mitutoyo depth micrometer 129-132, 0-6”, .001". 1 1168 Mitutoyo depth micrometer, code 129-132, 0-6”, case. 1 1169 Mitutoyo depth micrometer, 0-6”, code 129-132, case. 1 1170 Mitutoyo depth micrometer, 0-6”, code 129-132, case. 1 1171 Mitutoyo depth micrometer, 0-6” code 129-132, case. 1 1172 Starrett dial depth caliper #450 0-6”, case. 1 1173 Starrett depth caliper. 0-6”, model 450, case. 1 1174 Brown & Sharpe IP 67 6" digital caliper, English and 1 metric, case. 1175 Mitutoyo depth micrometer, code 129-132, 0-6”, case. 1 1177 Mitutoyo depth micrometer, code 129-132, 0-6”, case. 1 1178 Mitutoyo depth micrometer, code 129-132, 0-6”, case. 1 1181 Mitutoyo depth micrometer, code 129-132, DMC 4-6". 1 1182 Mitutoyo depth micrometer, code 129-116, DMC 100-150, 1 0-152mm, case. 1183 Mitutoyo depth micrometer, code 129-132, DMC 4-6", 1 case. 1184 Mitutoyo depth micrometer, code 129-132, DMC 4-6", 1 case. 1186 Mitutoyo depth micrometer code 129-132, DMC 4-6", 1 case. 1187 Mitutoyo depth micrometer, code 129-132, DMC 4-6", 1 case. 1189 Mitutoyo depth micrometer code 129-132, DMC 4-6", 1 case. 1190 Mitutoyo depth micrometer, code129-132, DMC 4-6", 1 case. 1191 (5) Ring gauge, assorted sizes. 1 1193 (6) Ring gauge. 1 1194 (6) Ring gauge, assorted sizes. 1 1195 (9) Ring gauge, assorted sizes. 1 1196

(5) Ring gauge, assorted sizes.

1 1197

Ring gauge.

1 1198 (8) Ring gauge, assorted sizes. 1 1199 (6) Ring gauge, assorted sizes. 1 1200

(9) Ring gauge.

1 This lot catalog is subject to changes.

1201 (13) Assorted ring gauges. 1 1202 (11) Assorted ring gauge. 1 1203 (26) Assorted sizes ring gauge. 1 1204 (34) Assorted sizes ring gauge. 1 1205 Assorted Go No Go 60 NO60 gauges. 1 1206 Assorted Go No GO 60 NO60 gauge. 1 1207 Assorted Go No Go gauges, 60 NO60 gauge. 1 1208 Assorted Go No Go gauges. 1 1209 Assorted Go No Go gauges. 1 1210 Assorted Go No Go gauges. 1 1211 Assorted Go No Go. 1 1212 Assorted thread gauges. 1 1213 Assorted thread gauges. 1 1214 Assorted thread gauges. 1 1215 Assorted thread gauges. 1 1216 Assorted thread gauges. 1 1217 Assorted thread gauges. 1 1218 Assorted thread gauges. 1 1219 Assorted thread gauges. 1