DOCSLIB.ORG

BASIC Stamp Programming Manual 2.0C · · Page 1 Contents

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
BASIC Stamp Programming Manual 2.0C · · Page 1 Contents BASIC Stamp Ò Programming Manual Version 2.0c Warranty Parallax warrants its products against defects in materials and workmanship for a period of 90 days. If you discover a defect, Parallax will, at its option, repair, replace, or refund the purchase price. Simply call our sales department for an RMA number, write it on the label and return the product with a description of the problem. We will return your product, or its replacement, using the same shipping method used to ship the product to Parallax (for instance, if you ship your product via overnight express, we will do the same). This warranty does not apply if the product has been modified or damaged by accident, abuse, or misuse. 14-Day Money-Back Guarantee If, within 14 days of having received your product, you find that it does not suit your needs, you may return it for a refund. Parallax will refund the purchase price of the product, excluding shipping/handling costs. This does not apply if the product has been altered or damaged. Copyrights and Trademarks Copyright © 2000 by Parallax, Inc. All rights reserved. PBASIC is a trademark and BASIC Stamp is a registered trademark or Parallax, Inc. PIC is a registered trademark of Microchip Technology, Inc. Windows is a registered trademark of Microsoft Corporation. 1-wire is a registered trademark of Dallas Semiconductor. Other brand and product names are trademarks or registered trademarks of their respective holders. Disclaimer of Liability Parallax, Inc. is not responsible for special, incidental, or consequential damages resulting from any breach of warranty, or under any legal theory, including lost profits, downtime, goodwill, damage to or replacement of equipment or property, and any costs of recovering, reprogramming, or reproducing any data stored in or used with Parallax products. Internet Access We maintain Internet systems for your convenience. These may be used to obtain software, communicate with members of Parallax, and communicate with other customers. Access information is shown below: Web: http://www.parallaxinc.com http://www.stampsinclass.com General e-mail: [email protected] Tech. e-mail: [email protected] Internet BASIC Stamp Discussion List We maintain a BASIC Stamp discussion list for people interested in BASIC Stamps. Many people subscribe to the list, and all questions and answers to the list are distributed to all subscribers. It’s a fun, fast, and free way to discuss BASIC Stamp issues. To subscribe to the BASIC Stamps list, visit the Tech Support section of the Parallax, Inc website. This manual is valid with the following software and firmware versions: BASIC Stamp 1: BASIC Stamp 2sx: STAMP.EXE software version 2.1 STAMP2SX.EXE software version 1.0 Firmware version 1.4 STAMPW.EXE software version 1.096 Firmware version 1.0 BASIC Stamp 2: STAMP2.EXE software version 1.1 BASIC Stamp 2p: STAMPW.EXE software version 1.096 STAMP2P.EXE software version 1.6 Firmware version 1.0 STAMPW.EXE software version 1.098 Firmware version 1.1 BASIC Stamp 2e: STAMP2E.EXE software version 1.0 STAMPW.EXE software version 1.096 Firmware version 1.0 The information herein will usually apply to newer versions but may not apply to older versions. New software can be obtained free on our ftp and web site (ftp.parallaxinc.com, www.parallaxinc.com). If you have any questions about what you need to upgrade your product, please contact Parallax. Contents PREFIX ........................................................................................................5 INTRODUCTION TO THE BASIC STAMP.........................................................7 BASIC STAMP 1 HARDWARE .........................................................................................8 BASIC STAMP 2 HARDWARE .......................................................................................10 BASIC STAMP 2E HARDWARE .....................................................................................12 BASIC STAMP 2SX HARDWARE...................................................................................14 BASIC STAMP 2P HARDWARE .....................................................................................16 DEVELOPMENT BOARDS ...............................................................................................18 BASIC Stamp 1 Carrier Board ..............................................................................18 BASIC Stamp 2 Carrier Board ..............................................................................19 BASIC Stamp Super Carrier Board......................................................................20 Board of Education .................................................................................................22 BASIC Stamp Activity Board .................................................................................23 GUIDELINES AND PRECAUTIONS...................................................................................25 QUICK START GUIDE.................................................................................29 USING THE BASIC STAMP EDITOR .............................................................33 BASIC STAMP WINDOWS EDITOR ...............................................................................34 BASIC STAMP DOS EDITOR .......................................................................................41 BASIC STAMP ARCHITECTURE...................................................................45 RAM ORGANIZATION (BS1) .........................................................................................45 RAM ORGANIZATION (BS2, BS2E, BS2SX, BS2P) ...................................................46 DEFINING AND USING VARIABLES.................................................................................48 The Rules of Symbol Names ................................................................................49 Defining Array Variables ........................................................................................51 Aliases and Variable Modifiers..............................................................................53 CONSTANTS AND COMPILE-TIME EXPRESSIONS .........................................................56 NUMBER REPRESENTATIONS .......................................................................................59 ORDER OF OPERATIONS...............................................................................................60 INTEGER MATH RULES..................................................................................................62 UNARY OPERATORS......................................................................................................63 Absolute Value (ABS).............................................................................................64 Cosine (COS) ..........................................................................................................64 Decoder (DCD)........................................................................................................64 BASIC Stamp Programming Manual 2.0c · www.parallaxinc.com · Page 1 Contents Inverse (~)................................................................................................................64 Negative (-)..............................................................................................................64 Encoder (NCD)........................................................................................................65 Sine (SIN) ................................................................................................................65 Square Root (SQR) ................................................................................................66 BINARY OPERATORS.....................................................................................................66 Add (+)......................................................................................................................67 Subtract (-)...............................................................................................................67 Multiply (*)................................................................................................................67 Multiply High (**) .....................................................................................................68 Multiply Middle (*/) ..................................................................................................68 Divide (/)...................................................................................................................69 Modulus (//)..............................................................................................................70 Minimum (MIN)........................................................................................................70 Maximum (MAX) .....................................................................................................71 Digit (DIG)................................................................................................................72 Shift Left (<<)...........................................................................................................72 Shift Right (>>)........................................................................................................72 Reverse (REV) ........................................................................................................73 And (&) .....................................................................................................................73
Load more

Recommended publications
  • The Parallax 2004 Fall Product Guide Is Brought to You by Parallax, Inc
    www.parallax.com The Parallax 2004 Fall Product Guide is brought to you by Parallax, Inc. and our network of 70+ distributors. This product guide is unique from all of our previous guides since the pricing is not published next to the Parallax part number and product description. Parallax, Inc. 599 Menlo Drive, #100 For pricing information, please visit your Rocklin, CA 95765, USA distributor’s web site or view the included price list (may not be applicable). Telephone: Office/Sales/Support: (916) 624-8333 The following 30 pages focus on Parallax’s Fax: (916) 624-8003 core products, including those which are most often carried by distributors. This includes Callers in the United States only: but is not limited to the following: BASIC Toll-Free Sales: 888-512-1024 Stamp microcontrollers, Programming Boards, Toll-Free Technical Support: 888-99-STAMP Starter Kits, Application Modules, Accessories, Robotics, Motor Control, Education Stamps Please Note: Sales Department, Technical in Class, Industrial, SX-Key Programming Support, and General Office hours are Monday Tools and Chips, Altera FPGA Development through Friday from 7:00 a.m. to 5:00 p.m., Tools. Additional accessories and components Pacific Standard Time. may be available from your distributor or www.parallax.com. Internet: www.parallax.com Our distributors are very responsive to customer requests and are able to procure E-mail: Parallax products that are available from our [email protected] web site. For international customers, this is [email protected] of extreme importance since distributors use [email protected] their expertise to provide you with the best pricing available after paying for overseas BASIC Stamp, Board of Education, Stamps shipping charges, duties, and taxes.
    [Show full text]
  • Drive Motor and Encoder
    ARobot Mobile Robot For Hobbyist, Research and Education Assembly and User Guide Copyright (c) 2005 Arrick Robotics All Rights Reserved Robotics.com ARobot Mobile Robot Revision D 11/17/2005 Table of Contents Introduction Introduction....................................................1 About ARobot................................................1 What You’ll Need..........................................2 Feature List ....................................................2 Specifications.................................................3 Precautions.....................................................4 Component Locator .......................................5 Glossary of Terms..........................................6 Assembly Assembly Overview.......................................9 Parts................................................................10 Painting ..........................................................13 Whiskers ........................................................14 Drive Motor and Brackets..............................16 Encoder Sensor ..............................................17 Front Wheel Assembly ..................................18 Steering Motor and Rear Wheels...................19 Controller Board ............................................21 Battery Pack...................................................22 Body Cable.....................................................23 Finishing Up...................................................24 Usage About the Controller ......................................25
    [Show full text]
  • BASIC Stamp Homework Board (Serial); Single #555-28158, 10
    Web Site: www.parallax.com Office: (916) 624-8333 Forums: forums.parallax.com Fax: (916) 624-8003 Sales: [email protected] Sales: (888) 512-1024 Technical: [email protected] Tech Support: (888) 997-8267 BASIC Stamp® HomeWork Board™ (Serial) Single (#555-28158) or 10-pack (#28158) This economical development platform with a surface-mount BASIC Stamp 2 microcontroller module was designed with beginners and student budgets in mind; the 10-pack perfect for outfitting a classroom. It is compatible with What’s a Microcontroller?, Robotics with the Boe-Bot, and most other Stamps in Class tutorials. See the Program Overview link at www.parallax.com/education for complete details. Features Key Specifications Built-in, surface-mount BASIC Stamp 2 Power requirements: 9 V battery; BS2 microcontroller requires 7 mA running, 50 µA in sleep BASIC Stamp I/O pins plus power Communication: Serial (RS-232) via DB9 connections are brought adjacent to a Operating temperature: 32 to 158 °F 2" x 1 3/8" breadboard. (0 to 70 °C) Built-in 220-ohm series resistors Dimensions: 3.05 x 4 in between the I/O pins and breadboard (7.75 x 10.16 cm) for a bit of protection in case of wiring errors Additional Items Required On-board regulator delivers up to 500 Serial cable (#800-00003) — OR — mA* of current for BS2 and breadboard USB to Serial Adapter with USB A to circuits (see Rev B note, page 3) Mini-B cable (#28031) LED connected to the BS2’s EEPROM 9 V battery clock line shows when a program is running PC running Windows 2K/XP/Vista/7 for the BASIC Stamp Editor software.
    [Show full text]
  • OEM-BS2 – Rev A2 (#27290/#27291) □ 27290 – Assembled □ 27291 – Kit
    Web Site: www.parallax.com Office: (916) 624-8333 Forums: forums.parallax.com Fax: (916) 624-8003 Sales: [email protected] Sales: (888) 512-1024 Technical: [email protected] Tech Support: (888) 997-8267 OEM-BS2 – Rev A2 (#27290/#27291) □ 27290 – Assembled □ 27291 – Kit Assembly Instructions This document is a guide that will aid you in the assembly of your OEM-BS2 Rev A2. It is assumed that you have the proper equipment and possess the skills necessary to safely assemble electronic components. Generally, it is best to start with the lower profile components and then work your way to the tallest components. This is often true because in tight places lower profile components are more difficult to get at with taller components in the way. 1. The three lowest profile components on the board are the 4.7K resistors and the 10K resistor. These resistors should have color bands around them that signify their value. The color band pattern for the 4.7K resistors should be: Yellow, Violet, Red and Gold. The color band pattern for the 10K resistor should be: Brown, Black, Orange and Gold. Resistors are polarity insensitive, which means that it doesn’t matter which end goes where. Install the 4.7K resistors where designated by ‘R1’ and ‘R2’, and the 10K resistor where designated by 'R3'. 2. The next lowest profile component on the board is the 20-pin right angle SIP header. It may seem ambiguous as to which side is inserted into the PCB. The side with the angle should be inserted into the PCB as shown in the drawing to the right.
    [Show full text]
  • Optore-16 Optore-16 Standard Standard
    OPTORE-16 OPTORE-16 STANDARD STANDARD EDV-Nr.: A-1222 EDV-No.: A-1222 16 Isolated Digital Inputs 16 Isolated Digital Inputs 16 Reedrelay Outputs 16 Reedrelay Outputs wasco® wasco® user‘s guide user‘s guide wasco® wasco® Copyright© 2006 by Messcomp Datentechnik GmbH Copyright© 2006 by Messcomp Datentechnik GmbH This documentation and the software included with this product are This documentation and the software included with this product are copyright by Messcomp Datentechnik GmbH. All rights are reserved. copyright by Messcomp Datentechnik GmbH. All rights are reserved. Messcomp Datentechnik GmbH reserves the right to modify the products Messcomp Datentechnik GmbH reserves the right to modify the products described in this manual at any time without notice. described in this manual at any time without notice. No parts of this manual are allowed to be reproduced, copied, trans- No parts of this manual are allowed to be reproduced, copied, trans- lated or transmitted in any way without a prior written authorization of lated or transmitted in any way without a prior written authorization of Messcomp Datentechnik GmbH. Messcomp Datentechnik GmbH. Trademarks Trademarks IBM PC, PC/XT and PC/AT are registered trademarks of International IBM PC, PC/XT and PC/AT are registered trademarks of International Business Machines (IBM). Business Machines (IBM). BASIC is registered trademark of Dartmouth College. BASIC is registered trademark of Dartmouth College. Turbo Pascal, Turbo C are registered trademarks of Borland. Turbo Pascal, Turbo C are registered trademarks of Borland. Quickbasic is registered trademark of Microsoft. Quickbasic is registered trademark of Microsoft. Powerbasic is registered trademark of Robert S.
    [Show full text]
  • What's a Microcontroller?
    What’s a Microcontroller? Student Guide VERSION 3.0 Page 2 · What’s a Microcontroller? WARRANTY Parallax warrants its products against defects in materials and workmanship for a period of 90 days from receipt of product. If you discover a defect, Parallax will, at its option, repair or replace the merchandise, or refund the purchase price. Before returning the product to Parallax, call for a Return Merchandise Authorization (RMA) number. Write the RMA number on the outside of the box used to return the merchandise to Parallax. Please enclose the following along with the returned merchandise: your name, telephone number, shipping address, and a description of the problem. Parallax will return your product or its replacement using the same shipping method used to ship the product to Parallax. 14-DAY MONEY BACK GUARANTEE If, within 14 days of having received your product, you find that it does not suit your needs, you may return it for a full refund. Parallax will refund the purchase price of the product, excluding shipping/handling costs. This guarantee is void if the product has been altered or damaged. See the Warranty section above for instructions on returning a product to Parallax. COPYRIGHTS AND TRADEMARKS This documentation is Copyright 2003-2009 by Parallax Inc. By downloading or obtaining a printed copy of this documentation or software you agree that it is to be used exclusively with Parallax products. Any other uses are not permitted and may represent a violation of Parallax copyrights, legally punishable according to Federal copyright or intellectual property laws. Any duplication of this documentation for commercial uses is expressly prohibited by Parallax Inc.
    [Show full text]
  • Process Control
    Process Control Student Guide VERSION 1.0 WARRANTY Parallax Inc. warrants its products against defects in materials and workmanship for a period of 90 days from receipt of product. If you discover a defect, Parallax Inc. will, at its option, repair or replace the merchandise, or refund the purchase price. Before returning the product to Parallax, call for a Return Merchandise Authorization (RMA) number. Write the RMA number on the outside of the box used to return the merchandise to Parallax. Please enclose the following along with the returned merchandise: your name, telephone number, shipping address, and a description of the problem. Parallax will return your product or its replacement using the same shipping method used to ship the product to Parallax. 14-DAY MONEY BACK GUARANTEE If, within 14 days of having received your product, you find that it does not suit your needs, you may return it for a full refund. Parallax Inc. will refund the purchase price of the product, excluding shipping/handling costs. This guarantee is void if the product has been altered or damaged. See the Warranty section above for instructions on returning a product to Parallax. COPYRIGHTS AND TRADEMARKS This documentation is copyright 2006 by Parallax Inc. By downloading or obtaining a printed copy of this documentation or software you agree that it is to be used exclusively with Parallax products. Any other uses are not permitted and may represent a violation of Parallax copyrights, legally punishable according to Federal copyright or intellectual property laws. Any duplication of this documentation for commercial uses is expressly prohibited by Parallax Inc.
    [Show full text]
  • BASIC Stamp® Homework Board™
    Web Site: www.parallax.com Office: (916) 624-8333 Forums: forums.parallax.com Fax: (916) 624-8003 Sales: [email protected] Sales: (888) 512-1024 Technical: [email protected] Tech Support: (888) 997-8267 BASIC Stamp® HomeWork Board™ USB Single (555-28188) or 10-pack (#28188) This economical development platform with a surface-mount BASIC Stamp 2 microcontroller module was designed with beginners and student budgets in mind; the 10-pack perfect for outfitting a classroom. It is compatible with What’s a Microcontroller?, Robotics with the Boe-Bot, and most other Stamps in Class tutorials. See the Program Overview link at www.parallax.com/education for complete details. Features Key Specifications Built-in, surface-mount BASIC Stamp 2 Power requirements: 9 V battery; BS2 microcontroller requires 7 mA running, 50 µA in sleep BASIC Stamp I/O pins plus power Communication: USB mini-B to onboard connections are brought adjacent to a USB to RS-232 converter 2" x 1 3/8" breadboard. Operating temperature: 32 to 158 °F Built-in 220-ohm series resistors (0 to 70 °C) between the I/O pins and breadboard Dimensions: 3.05 x 4 in for a bit of protection in case of wiring (7.75 x 10.16 cm) errors On-board regulator delivers up to Additional Items Required 500 mA of current for BS2 and USB A to Mini-B cable (#805-00006) breadboard circuits 9 V battery LED connected to the BS2’s EEPROM clock line shows when a program is PC running Windows 2K/XP/Vista/7 for running the BASIC Stamp Editor software.
    [Show full text]
  • Programming Editor Software 1
    THE PROGRAMMING EDITOR SOFTWARE 1 PROGRAMMING EDITOR The Programming Editor software is a very powerful software tool. This datasheet is designed to explain the different software and hardware options for use with the Programming Editor software. The software is primarily designed for use with the pICAXE system, but can also be used with the older Stamp 1 system or with assembler code. Programming Options The Programming Editor allows control programs to be generated for microcontrollers. Programs can be created in three ways - drawn as flowcharts, written in a simple textual BASIC language, or written in the much more advanced assembler code language. When programs are created as flowcharts, the flowchart can be simulated on screen, but is then automatically converted into a BASIC listing for downloading. Therefore the rest of this explanation sheet refers to ‘BASIC’ as the generic term for both ‘flowchart drawing’ and direct ‘BASIC command’ programming. Hardware Options There are four main ways the Programming Editor software can be used to download a program into a microcontroller system: 1. Program a Stamp 1 module in BASIC via a direct cable link. 2. Program a PICAXE microcontroller in BASIC via a direct cable link. 3. Program a microcontroller to replace a Stamp chip using a PIC programmer. 4. Program a microcontroller in assembler code using a PIC programmer. 1) Stamp System The BASIC Stamp system was developed by a company called Parallax in the USA in the early 1990’s. The system uses two chips – a pre-programmed microcontroller and a separate memory chip (EEPROM). This means that programs can be downloaded (via a direct cable link) to the Stamp without the need for a programmer, because the program is actually downloaded into the external memory chip rather than into the microcontroller itself.
    [Show full text]
  • Performance Analysis of PING))) Ultrasonic Distance Sensor
    Performance Analysis of PING))) Ultrasonic Distance Sensor Elaine Cole, elainemcole (at) wustl.edu (A paper written under the guidance of Prof. Raj Jain) Download Abstract: The concept of a robot refers to a machine or device with the capacity to perform complex actions [MerriamWebster01]. In this current era of technology, robotics serves as more than just a branch of science [Wikipedia02], but a field with opportunity to improve the lives of people around the world. From designing a self-driving wheelchair for those in retirement communities struggling with mobility [Teo17] to building a robotic system to monitor neurons with a success rate comparable to manual performance of highly trained scientists [Trafton17], roboticists have made massive leaps in both the mechanical and electrical components of a robot. Today, robotic kits can be purchased for all ages, but as the use of robots in various industries increases, so does the need for precision in robotic systems; delay and error are unacceptable in certain real-time systems. The objective of this study is to measure and analyze the precision of a particular home-built robot's ability to recognize objects using a Parallax PING))) Ultrasonic Distance Sensor (PING))) sensor) with a 2^k*r factorial design, beginning with an overview of key methods and terms used in this study's system and experiment, subsequently detailing the performance evaluation, and finally explaining the results and analyzing what they mean as it relates to the precision of the robot. The results show that the PING))) sensor for the given factors and workloads has an error large enough that, while this may be acceptable for a hobby robot project, this robotic system should not be used in the real world for measuring distance in critical situations.
    [Show full text]
  • An Overview About Basic for Qt® from July 17, 2012
    An overview about Basic For Qt® from July 17, 2012 Contents An overview about Basic For Qt®..................................................................................................1 Object-Oriented...........................................................................................................................2 Event-Driven...............................................................................................................................2 Basic For Qt® Framework..........................................................................................................3 The Integrated Development Environment (IDE) - To simplify application development.............4 IDE Contents...............................................................................................................................4 Toolbox.......................................................................................................................................4 Project Window...........................................................................................................................4 Properties Windows....................................................................................................................4 Code / Design view.....................................................................................................................4 Review........................................................................................................................................4 Getting Started - Making
    [Show full text]
  • BASIC Stamp Programming Manual Version 1.9
    ® BASIC Stamp Programming Manual Version 1.9 ® Warranty Parallax warrants its products against defects in materials and workmanship for a period of 90 days. If you discover a defect, Parallax will, at its option, repair, replace, or refund the purchase price. Simply return the product with a description of the problem and a copy of your invoice (if you do not have your invoice, please include your name and telephone number). We will return your product, or its replacement, using the same shipping method used to ship the product to Parallax (for instance, if you ship your product via overnight express, we will do the same). This warranty does not apply if the product has been modified or damaged by accident, abuse, or misuse. 14-Day Money-Back Guarantee If, within 14 days of having received your product, you find that it does not suit your needs, you may return it for a refund. Parallax will refund the purchase price of the product, excluding shipping/handling costs. This does not apply if the product has been altered or damaged. Copyrights and Trademarks Copyright © 1998 by Parallax, Inc. All rights reserved. PBASIC is a trademark and Parallax, the Parallax logo, and BASIC Stamp are registered trademarks of Parallax, Inc. PIC is a registered trademark of Microchip Technology, Inc. Other brand and product names are trademarks or registered trademarks of their respective holders. Disclaimer of Liability Parallax, Inc. is not responsible for special, incidental, or consequential damages resulting from any breach of warranty, or under any legal theory, including lost profits, downtime, goodwill, damage to or replacement of equipment or property, and any costs or recovering, reprogramming, or reproducing any data stored in or used with Parallax products.
    [Show full text]