Bill Addis

Publications on , Philosophy and Practice of Building Engineering

(updated February 2016)

HISTORY OF ...... 2 A Books ...... 2 B Monographs, Book Chapters and Other Contributions to Books ...... 2 C Refereed Periodical and Conference ...... 3 D Exhibitions and Other Media...... 5

PHILOSOPHY OF ENGINEERING ...... 6 A Books ...... 6 B Monographs, Book Chapters and Other Contributions to Books ...... 6 C Refereed Periodical and Conference Papers ...... 6

BUILDING ENGINEERING DESIGN ...... 7 A Books ...... 7 B Monographs, Book Chapters and Other Contributions to Books ...... 7 C Refereed Periodical and Conference Papers ...... 7 D Exhibitions and Other Media...... 7

ENGINEERING PRACTICE ...... 8 A Books ...... 8 B Monographs, Book Chapters and Other Contributions to Books ...... 8 C Refereed Periodical and Conference Papers ...... 8 D Exhibitions and Other Media...... 8

SUSTAINABLE CONSTRUCTION ...... 9 A Books ...... 9 C Refereed Periodical and Conference Papers ...... 9

PEDAGOGY OF ...... 10 C Refereed Periodical and Conference Papers ...... 10

Publications Page 1 HISTORY OF CONSTRUCTION

A Books ADDIS, Bill (2009), Edificaçao - 3000 Anos de Projeto Engenharia e Construçao, Sao Paolo: Bookman Companhia. Translation of ADDIS, Bill (2007), Building: 3000 years of Design, Engineering and Construction. London & New York: Phaidon. 640pp. ISBN 978-0-7148-4146-5. ADDIS, Bill (2007), Building: 3000 years of Design, Engineering and Construction. London & New York: Phaidon. 640pp. ISBN 978-0-7148-4146-5. DUNKELD, M., CAMPBELL, J., LOUW, H., TUTTON, M., ADDIS, B., POWELL, C., & THORNE, R. (Eds) (2006), Proceedings of the Second International Congress on Construction History (Cambridge). Construction History Society. 3 Vols. 3,471pp. ISBN 0-7017-0203-6. ADDIS, W. (Ed.) (1999), Structural and Design. Vol.12 of the series ‘Studies in the History of Civil Engineering’. Aldershot: Ashgate (Variorum). 365pp. ISBN 0-86078-761-3.

B Monographs, Book Chapters and Other Contributions to Books ADDIS, Bill (2014), Chapter on ‘Physical modelling and form finding’. Pp. 33-43in Adriaenssens, S., Block, P., Veenendaal, D. and Williams, C. (Eds) Shell Structures for : Form finding and optimization, London: Routledge, 2014. ADDIS, Bill (2013), Book Chapter on ‘Industrialised and prefabricated housing in 1940s Britain’ pp. 277-290 in Cassinello, P. (Ed.) Eduardo Torroja 1949: Strategy to industrialise housing. Madrid: Fundacion Eduardo Torroja 2013. ADDIS, Bill (2012), ‘Iron in floor structures: the development of fireproof floors’ Pages 492-98 in Gargiani, Roberto (ed.) (2012) L’architraves, le plancher, la plate-forme: Nouvelle histoire de la construction, Lausanne: Presses polytechniques et universitaires romandes. ISBN 978-2-88074-893-7 ADDIS, Bill (2012), ‘The reintroduction of wrought iron in floor structures’ Pages 517-21 in Gargiani, Roberto (ed.) (2012) L’architraves, le plancher, la plate-forme: Nouvelle histoire de la construction, Lausanne: Presses polytechniques et universitaires romandes. ISBN 978-2-88074-893-7 ADDIS, Bill (2012), ‘Eco-floors’ Pages 897-901 in Gargiani, Roberto (ed.) (2012) L’architraves, le plancher, la plate-forme: Nouvelle histoire de la construction, Lausanne: Presses polytechniques et universitaires romandes. ISBN 978-2-88074-893-7 ADDIS, Bill (2010), ‘The Iron Revolution: How iron replaced traditional structural materials between 1770 and 1870’ pp.33-48 in Rinke, M. and Schwartz. J. (Eds) (2010) Before , Zurich: Niggli. 2010. ISBN 978-3-7212-0756-9 ADDIS, Bill (2009), ‘The Crystal Palace and its place in Structural History.’ pp.11-36 in Motro, René (Ed.) (2009), Structural Morphology and Configuration Processing of Space Structures, Brentwood, Essex: Multi-Science Publishing. ISBN 978-1-907132-13-1. ADDIS, Bill (2005), ‘A history of using models to inform the design of structures.’ in Essays in the History of the Theory of Structures: In honour of Jacques Heyman, Ed. by Santiago Huerta. Madrid: Instituto Juan de Herrera, 2005. 451pp. pp.9-44. ISBN 84-7790-416-2. ADDIS, Bill (2004), ‘Report on the State of Construction History in Britain’ in Construction History: Research Perspectives in Europe, by Becchi, A., Corradi, M., Foce, F. & Pedemonte, O. Florence:

Publications Page 2 Kit William Books, 2004. pp.11-21. ADDIS, Bill (2004), Entries on Shells, Fire Engineering, and Experimental Stress Analysis Encyclopaedia of Twentieth Century . Ed. by Colin Hempstead & William Worthington. New York: Routledge, 2004.. 992pp. ISBN ADDIS, Bill (2003), ‘Key Developments in the History of Concrete Construction and the Implications for Remediation and Repair.’ Chapter 2, pages 15-105 in Building: Pathology: Concrete edited by Susan MacDonald. Oxford: Blackwell Science, 2003. 309pp. ISBN 0-632-05251-1. ADDIS, Bill (2003), Entries on George Stephenson and The History of Engineering. Readers’ Guide to British History. Ed. by David Loades. New York: Routledge, 2003. 1648pp. ISBN 1-5798-242-7. ADDIS, Bill (2002), Entries on (pp.799-802) and Robert Hooke (pp.334-337). Biographical Dictionary of Civil Engineers Vol.1. 1500-1830. Ed. SKEMPTON, A.W., et al. London: Institution of Civil Engineers / Thomas Telford, 2002. 897pp. ISBN 0-7277-2939-X. ADDIS, Bill (1999), ‘Mills and warehouses in 19th-century England.’ Pages 8-18 in Study Guide 2: European Cities since the Industrial Revolution. Milton Keynes: Open University, 1999. 88pp. ISBN 0-7492-8747-0. ADDIS, Bill (1999), ‘Steel and concrete-framed buildings in 20th-century England.’ Pages 45-56 in Study Guide 2: European Cities since the Industrial Revolution. Milton Keynes: Open University,1999. 88pp. ISBN 0-7492-8747-0. ADDIS, Bill (1997), ‘Concrete and steel in twentieth-century construction: from experimentation to mainstream usage.’ Pages 103-142 in Structure and Style ed. by Michael Stratton. London: Spon, 1997. 230pp. ISBN 0-419-21740-1. ADDIS, Bill (1997), Entries on William Fairbairn (p.181); Anthony Hunt (pp.228-229); L'invention (pp.236-238); Matériaux intélligents (pp.288-289); Mining & Metallurgy Building, Birmingham University (pp.303-304); Schlumberger Cambridge Research (pp.438-439); Bâtiment de l'arsenal de Sheerness (pp.455-456). L'art de l'ingénieur - constructeur, entrepreneur, inventeur Ed. by PICON, A. Paris: Éditions du Centre Pompidou, 1997. 596pp. ISBN 2-85850-911-5.

C Refereed Periodical and Conference Papers ADDIS, Bill (2016), ‘Are the traces left by structural engineers sufficient to assess their eminence?’ Proceedings of the Third Conference of the Construction History Society, Cambridge, 2016. pp. #- #. ADDIS, Bill & VILANOVA, Antoni (2015), ‘El conjunto fabril de Ca l’Aranyó en Barcelona y sus orígens ingleses.’ Actas del IX Congreso Nacional y Primer Congreso Internacional Hispanoamericano de Historia de la Construcción, Segovia, October 2015, Vol.1, pp. 63-74. ADDIS, Bill (2015), ‘The epistemology of engineering design as a contribution to construction history.’ Proceedings of the Second Conference of the Construction History Society, Cambridge, 2015. pp. 3-10. ADDIS, Bill (2014), ‘The contribution of the Journal Construction History towards establishing a history of construction discipline.’ Proceedings of the First Conference of the Construction History Society, Cambridge, 2014. Pp.iii-x. ADDIS, Bill (2014), ‘L’histoire de la construction Outre-Manche.’ delivered at the Deuxième congrès francophone d’histoire de la construction in Lyon in January 2014 ADDIS, Bill (2013), ‘Die Ursprünge einiger ‘idealer’ struktureller Formen’ (paper for Jahrestagung der Deutscher Gesellschaft für Bautechnikgeschichte, Aachen. – being published) ADDIS, Bill (2013), ‘Las contribuciones de Christopher Wren y Robert Hooke en el nacimiento de la

Publications Page 3 moderna ingeniería de construcción.’ Actas del VIII Congreso Nacional de Historia de la Construcción, Madrid, October 2013, Vol.1, pp. 1-11. ADDIS, Bill (2013), ‘ ‘Toys that save millions’ a history of using physical models in structural design’ The , vol.91, Issue 4, April, pp.11-27 ADDIS, Bill (2012), ‘The Development of Design Charts and other Graphical Calculation Tools for use by Building and Civil Engineers up to the Early Twentieth Century’, Nuts and Bolts of Construction History (Proceedings of the Fourth International Congress on Construction History, Paris, 2012), vol.1, pp.201-10. ADDIS, Bill (2010), ‘Casas prefabricadas de alminio: los orígenes de esta industria morderna de inglaterra en 1945’, Actas del Séptimo Congreso Nacional de Historia de la Construcción, Santiago de Compostella, Spain, 2010, pp.127-151. ADDIS, Bill (2009), ‘A Brief History of Design Methods for Building Acoustics’, Proceedings of the Third International Congress on Construction History, Cottbus, Germany, 2009, pp.1-10. ADDIS, Bill (2006), ‘The use of Scientific Calculations in Design Procedures for Heating, Ventilation, Day Lighting and Acoustics from the eighteenth century to the mid-nineteenth century’, Proceedings of the Second International Congress on Construction History, Cambridge, England pp.127-151. ADDIS, Bill (2006), ‘The Crystal Palace and its place in Structural History.’ Journal of Spatial Structures Vol.21, No.1, pp.3-19. ISSN 0304-3622. ADDIS, Bill (2004), ‘A history of using models to inform the design and construction of structures’, Shell and Spatial Structures: from Models to Realization - Symposium of the International Association for Spatial Structures, Montpelier, France. Published on CD only. ADDIS, Bill (2003), ‘Inventing a history for structural engineering design’ Proceedings of the First International Congress on Construction History, Madrid, 2003 Madrid: Instituto Juan de Herrera. pp.113-122. ADDIS, W. (1999), ‘The history of using in buildings and some thoughts about the future.’ Pages 15-22 in Glass in Buildings, University of Bath, Centre for and Cladding Technology, 1999. ADDIS, W. (1998), ‘Using individual projects to develop in young engineers an understanding of the skills of other disciplines.’ Pages 40-46 in Engineering Design Education '98 - Design at the Interface; Proceedings of the 20th SEED Annual Design Conference, Imperial College, London (1998) ADDIS, W. (1998), ‘Using the history of engineering design.’ Pages 97-100 in Engineering Design Education '98 - Design at the Interface; Proceedings of the 20th SEED Annual Design Conference, Imperial College, London (1998) ADDIS, W. (1994), ‘Design Revolutions in the History of Tension Structures’, Structural Engineering Review, Vol.6, No.1, (1994) pp.1-10. ADDIS, W. (1993), ‘Making Engineering Sense of ’, Technology Change, Oxford University (conference proceedings) (1993) ADDIS, W. (1992), ‘Structural Engineering History and the Education of Structural Engineers’, Education for Structural Engineering, pp.21-28, Innovative Engineering Press, Sheffield. (1992) ADDIS, W. (1992), ‘Engineering History and the Formation of Design Engineers’, International Journal of Engineering Education, Vol.8, No.6, (1992) pp.408-412 ADDIS, W. (1992), ‘The Rôle of the Study of History in the Formation of Engineers’, 3rd World Conference on Engineering Education (SEFI), International, Quality and Environmental Issues,

Publications Page 4 Vol. 1, Computational Mechanics Publications, Southampton. (1992) pp.463-468. ADDIS, W. (1989-90), ‘The Evolution of Structural Engineering Design Procedures - A History for that Skill called Design’, Transactions of the Newcomen Society, 61, (1989-90) pp.51-64. ADDIS, W. (1983), A New Approach to the History of Structural Engineering Vol.8 1983. pp 1-13. ADDIS, W. (1982), Some Problems of looking at the History of Structures in terms of ‘Theory’ and ‘Practice’, and a Proposed Solution, International Association for and Structural Engineering - Colloquium on History of Structures. Cambridge 1982. pp.61-66.

D Exhibitions and Other Media

Exhibitions (1997) L'art de l'ingénieur - constructeur, entrepreneur, inventeur: contribution to conception and curation of exhibition at the Centre Pompidou, Paris. 25th June - 29th September 1997.

Audio Cassettes ADDIS, Bill (1999), Mills and warehouses in nineteenth-century England. 30-minute Audio-cassette for Open University Course AT308 (1999) ADDIS, Bill (1999), Steel and concrete frame buildings in twentieth-century England. 30-minute Audio- cassette for Open University Course AT308 (1999)

Publications Page 5 PHILOSOPHY OF ENGINEERING

A Books ADDIS, W. (1990), Structural Engineering - the Nature of Theory and Design, Chichester: Ellis Horwood. 258pp. ISBN 0-13-850611-6.

B Monographs, Book Chapters and Other Contributions to Books ADDIS, Bill (2010), ‘The relation between and Statics in Structural Design’, pp.53-69 in Casinello, Pepa & Huerta, Santiago (Eds) (2010) Geometría y proporción en las estructuras: Ensayos en honor de Ricardo Aroca. Madrid: Instituto Juan de Herrera. ISBN 978-84-6143791-7 ADDIS, Bill (2010), ‘Konrad Wachsmann – Wendepunkt im Bauen’, pp.193-94 in Nerdinger, Winfried, Barthel, R. et al. (Eds) (2010) Wendepunkt/e im Bauen: von der seriellen zur digitalen Architektur. Munich: Architekturmuseum der Technische Universität München. ISBN 978-3-920034-39-3

C Refereed Periodical and Conference Papers ADDIS, Bill (2003), ‘The nature of progress in history’ Proceedings of the First International Congress on Construction History, Madrid, 2003 Madrid: Instituto Juan de Herrera. pp.123-129. ADDIS, Bill (2002), ‘Technological innovation and progress in building engineering and architecture.’ Pages 47-52 in The Place of Technology in Architectural History, Ed. Hentie Louw. Society of Architectural Historians of Great Britain. 59pp. ISBN 0-9539254-20. ADDIS, W. (1997), ‘Free will and determinism in the conception of structures’, Journal of the International Association for Shell and Spatial Structures Vol.38 No.2 (1997) pp.83-89 .ISSN 0304-3622. ADDIS, W. (1996), ‘Structural Criticism and the Aesthetics of Structures’, Congress Report, 15th Congress of International Association for Bridge and Structural Engineering, Copenhagen (1996). pp.121-126. ADDIS, W. (1996), ‘Free will and determinism in the conception of structures’, Proceedings of International Symposium on Conceptual Design of Structures, University of Stuttgart International Association of Shell and Spatial Structures, Stuttgart, 1996. pp.29-36. ADDIS, W. (1992), ‘The Myth of Technology Transfer’, 3rd World Conference on Engineering Education (SEFI), Industrial Links, Computers and Design, Vol. 3, pp.391-396, Computational Mechanics Publications, Southampton.(1992) ADDIS, W. (1992), ‘The Design procedure as a means of Storing Engineering Knowledge’, European Journal of Engineering Education, Vol.17, No.4, (1992) pp.387-395. ADDIS, W. (1991), ‘Engineering Design Procedures as a Form of Knowledge’, New Perspectives on the Dissemination and Synthesis of Engineering Knowledge, European Society for Engineering Education (SEFI), Marseille, (1991) pp.335-344. ADDIS, W. (1988), Models in Engineering Science and Engineering Design, International Association for Bridge and Structural Engineering - Challenges to Structural Engineering, Helsinki. (1988) pp 769-774.

Publications Page 6 BUILDING ENGINEERING DESIGN

A Books ADDIS, Bill (2001), Creativity and Innovation: the Structural Engineer’s Contribution to Design. Oxford: Architectural Press. 138pp. ISBN 0-7506-4210-6. ADDIS, W. (1994), The Art of the Structural Engineer, London: Artemis. 144pp. ISBN 1874-056-41-2.

B Monographs, Book Chapters and Other Contributions to Books ADDIS, W. (1992), The Engineers' contribution to Contemporary Architecture - The Art of the Structural Engineer. London: The Building Centre Trust. (1992). ADDIS, W. (1990), The Engineers' contribution to Contemporary Architecture - The Interaction of Structure and Services, London: The Building Centre Trust (1990). ADDIS, W. (1989), The Engineers' Contribution to Contemporary Architecture - Tension Structures, London: Building Centre. (1989).

C Refereed Periodical and Conference Papers ADDIS, Bill (2002), ‘Developing a better understanding of the engineers' creative role in design.’ Journal of Spatial Structures Vol.17, No.2-3, pp.129-133. ISSN 0304-3622. ADDIS, Bill (2000), ‘Aesthetics is not just about appearances.’ Congress Report, 16th Congress of International Association for Bridge and Structural Engineering, Luzern, 2000. Summary only pp.24-25. ISBN 3-85748-101-5. (Full paper published on accompanying CD.) ADDIS, W. (1999), ‘'The myth of the -engineer: a late 20th-century, British who-dunnit’. pp.87- 93 in Voyatzaki, M. (Ed.) Architecture and engineering: the teaching of architecture for multi- disciplinary practice, Proceedings of Conference of European Association for Architectural Education. University of Plymouth, 1999. ISBN 2-930301-00-7. ADDIS, W. (1997), ‘On being an Engineer’, Patterns No.12 July 1997, pp.4-40. ISSN 1352-2795.

D Exhibitions and Other Media

Exhibitions (1994) The Art of the Structural Engineer (new version), RIBA, London, September 1994 (1993) The Art of the Structural Engineer, Interbuild 1993, Birmingham Exhibition Centre (1989-92) The Engineers' Contribution to Contemporary Architecture, The Building Centre, London. Exhibition 1 - Tension Structures, December 1989 - January 1990. Exhibition 2 - The Interaction of Structure and Services, February - March 1991. Exhibition 3 - The Art of the Structural Engineer, January - February 1992.

Educational Slide Packages ADDIS, Bill (1993), The Engineers' Contribution to Contemporary Architecture - The Interaction of Structure and Services, CERCI, London. June 1993 ADDIS, Bill (1993), The Engineers' Contribution to Contemporary Architecture - The Art of the Structural Engineer, CERCI, London. June 1993

Publications Page 7 ENGINEERING PRACTICE

A Books

WALKER, D. and ADDIS, W. (1998), Happold: the Confidence to Build. London: Spon. 176pp. ISBN 0-419-24070-5. WALKER, D. and ADDIS, W. (1997), Happold: The Confidence to Build. Bath: Happold Trust Publications. 176pp. ISBN 0-9532096-0-1.

B Monographs, Book Chapters and Other Contributions to Books ADDIS, W. (1996), ‘Structural Engineering’ (with Mike Bussell). Pages 547-568 in Information Sources in Engineering, Ed. by Mildren, K. & Hicks, P. London: Bowker Saur, 1996. 772pp. ISBN 1- 85739-057-1. ADDIS, W. (1996), ‘Construction Engineering’ (with Mike Bussell). Pages.519-545 in Information Sources in Engineering, Ed. by Mildren, K. & Hicks, P., London: Bowker Saur (1996). 772pp. ISBN 1-85739-057-1.

C Refereed Periodical and Conference Papers ADDIS, W. & AL-GHAMDI, M. (1998), ‘The international Competitiveness of Consulting Engineers: the Role to be played by Technical Marketing’, First International Construction Marketing Conference: Opportunities and Strategies in a Global Marketplace, University of Leeds (1998) pp.29-39. ADDIS, W. & AL-GHAMDI, M. (1998), ‘The Role of Technical Marketing in effective implementation of Total Quality Management by Consulting Engineering Firms’, Fourteenth Annual ARCOM Conference, University of Reading (1998) pp.615-623.

D Exhibitions and Other Media (1996) On Being an Engineer: an exhibition of the life and work of Sir Edmund Happold, 1930-96. (first shown April 1996; since then shown in various venues)

Publications Page 8 SUSTAINABLE CONSTRUCTION

A Books ADDIS, Bill (2010), Reuso De Materiais e Elementos de Construçao, Sao Paolo, Brazil: Oficina De Textos. Translation of ADDIS, Bill (2006), Building with Reclaimed Components and Materials. London: Earthscan, 2006. 106pp. ADDIS, Bill (2006), Building with Reclaimed Components and Materials. London: Earthscan, 2006. 106pp. ADDIS, W. & SCHOUTEN, J. (2004), Design for Deconstruction: Principles of design to facilitate reuse and recycling. London: CIRIA, 2004. 106pp. ADDIS, B. & TALBOT, R. (2001), Sustainable Construction Procurement: a guide to delivering environmentally-responsible projects. London: CIRIA, 2001. 216pp.

C Refereed Periodical and Conference Papers KNIGHT, D. & ADDIS, Bill (2011), ‘Embodied Carbon Dioxide as a design tool – a case study’, Proceedings of ICE Civil Engineering, 164, Nov 2011, pp.171-76 ADDIS, Bill (2002), ‘Delivering sustainable construction’, Proceedings of the Sustainable Building Conference, Oslo 2002. (CD only) ADDIS, Bill (2002), ‘Evaluating the environmental benefits of using structural timber in buildings,’ Proceedings of the Sustainable Building Conference, Oslo 2002. CD only ADDIS, Bill (2000), ‘How should engineers help deliver sustainable construction?’ Proceedings of the Sustainable Building Conference, Maastricht 2000. CD only ADDIS, Bill (1999), ‘How will engineers help deliver sustainable construction?’ Proceedings of the IABSE Conference, Luzern 1999. CD only

Publications Page 9 PEDAGOGY OF STRUCTURAL ENGINEERING

C Refereed Periodical and Conference Papers ADDIS, W. (1999), ‘Design decisions and engineering rationale.’ pp.481-82 in Voyatzaki, M. (Ed.), Architecture and engineering: the teaching of architecture for multi-disciplinary practice, Proceedings of Conference of European Association for Architectural Education, University of Plymouth, 1999. ISBN 2-930301-00-7. ADDIS, W. (1998), ‘The RSA Student Engineering Design Awards.’ Pages 119-122 in Engineering Design Education '98 - Design at the Interface; Proceedings of the 20th SEED Annual Design Conference, Imperial College, London (1998) HAENLEIN, H. & ADDIS, W. (1996), ‘Architectural Education - meeting the challenge’, International Journal of Architectural Management, Practice and Research (ISSN 1026-3454) no.12 (1996) pp.15-22. ADDIS, W. (1996), ‘On becoming and being an engineer’, International Association for Bridge and Structural Engineering – Colloquium, Cambridge. London: Institution of Structural Engineers. (1996). EYRE, J.R., MORREAU, P., CROLL, J. and ADDIS, W. (1994), ‘Developing structural designers: a new graduate course at UCL’, The Structural Engineer Vol.72, No.14, 19 July (1994) pp.232-234. ADDIS, W. (1992), ‘An Academic Approach to Understanding the Nature of Design’, Education for Structural Engineering, pp.289-295, Innovative Engineering Press, Sheffield. (1992) ADDIS, W. (1991), ‘The Experience of Industrial Secondment by University Staff’, New Perspectives on the Dissemination and Synthesis of Engineering Knowledge, European Society for Engineering Education (SEFI), Marseille, (1991) pp.199-204. ADDIS, W. (1989), ‘Building Performance in the Curriculum’, Implementation of the Performance Concept in Building in Education and Training, Conseil International du Batiment Lisbon, (1989) pp109-117. ADDIS, W. (1988), ‘The Use of Computer Simulation in Structural Design Education’, International Association for Bridge and Structural Engineering - Challenges to Structural Engineering, Helsinki. (1988) pp 225-230. ADDIS, W. (1988), ‘The Teaching of Building Design by Simulation’, Technik lehren: Technik lernen; Referate des 17. internationale Symposiums ‘Ingenieur-pädagogik '88’, A. Melezinek (Hrsg.), Leuchtturm Verlag, Basel. (1988) pp.250-255.

Publications Page 10