Stocking Stuffers

A G

B E F H

C I D

A. Burris AR-P.E.P.R.™ Scope Mounts C. Otis All-Purpose The Proper Eye Position Ready (P.E.P.R.) Mount was designed specifically Cleaning Brushes for mounting combat riflescopes atop flattop AR-15 receivers. Provides 2" of forward scope Otis’s dual-ended utility brushes are available with white or blue nylon, bronze, or stainless positioning for long-eye-relief scopes. Aluminum construction. The Weaver-style mounts steel bristles. Nylon brushes gently remove fresh carbon deposits from any surface. Bronze on top of the rings accept more accessories. Ring height: 1" (measured brushes are good for general internal cleaning; stainless steel brushes to remove persistent, from bottom of scope tube to top of base). Cross-bolt/ hardened-on fouling. 3-Pack has 1 each white nylon, bronze, and steel; 9-Pack has 3 each hex nut attachment system or quick-detach (QD) white nylon, bronze, and steel. throw-levers for easy removal/reinstall. #668-000-025SW NEW White Nylon AP Brush $3.99 $20 Factory Rebate NEW on all Burris P.E.P.R. Mounts! #668-000-024SW Blue Nylon AP Brush 3.99 See back cover or #668-000-023SW NEW Bronze AP Brush 3.99 REBATE www.sinclairintl.com/rebates NEW for details. #668-000-022SW Stainless Steel AP Brush 3.99 #668-000-018SW NEW All Purpose Brush Variety Pack 10.99 #118-000-028SW 1" P.E.P.R. Mount $80.99 #668-000-094SW NEW Variety Bulk Pack 16.99 #118-000-038SW 1" QD P.E.P.R. Mount 107.99 #749-101-260SW 30mm P.E.P.R. Scope Mount 80.99 #118-000-036SW 30mm QD P.E.P.R. Mount 107.99 #118-000-123SW NEW 34mm P.E.P.R. Mount - 20 MOA 107.99 D. Winchester Primers Winchester primers give instant, hot ignition and are easy to seat into primer pockets. Preferred by many hunters and competitors for their ability to maintain stability in tempera- B. JP Enterprises Reduced Power ture and humidity extremes. 1,000 primers per box. Sale prices valid thru Jan. 12, 2015. Spring Kit ITEM # DESCRIPTION EACH Lighter springs provide a 3.5 lb. trigger pull when used #749-004-527SW Small Rifle $31.99 $29.99 with JP triggers or a pull of 4.5 to 5 lbs. when used #749-004-526SW Large Rifle 31.99 29.99 with standard trigger components. Includes hammer #749-004-532SW Small Pistol 30.49 29.99 spring, trigger return spring, and disconnector spring. #749-004-533SW Large Pistol 30.49 29.99 Installation instructions also explain engagement sur- #749-004-645SW Large Rifle Mag 33.99 29.99 face polishing to obtain a smooth, reliable trigger. #105-202-778SW 209 Shotshell 34.99 29.99 #105-000-125SW Triple 7 Muzzleloader (No. 209)* 7.99 #452-000-007SW JPS3.5 Reduced-Power Spring Kit $10.99 * Sold 100 per box. 2 E. Chamber Safety Flags K. Lapua Brass NRA- and CMP-approved chamber safety flags. #749-000-125 is the traditional range safety Many shooters have found Lapua brass to be among the brass avail- flag issued and used at matches for the 30 caliber service rifles and bolt action match rifles. able. The Lapua 220 Russian is used almost exclusively by competitive AR bolts can slam closed on this flag with no effect to the bolt or the flag. Curved shape benchrest shooters to make 22 and 6mm PPC cases. The 6mm BR keeps the flag from falling out. #749-000-170 was developed specifically for the AR type Lapua brass is a favorite among serious benchrest shooters. Packaged rifles to eliminate the problem of the AR bolt “eating” the end of the safety flag. It will work in plastic cases of 100. for all rifles and cartridges. #749-000-125SW MTM Chamber Safety Flag (For 30 Caliber Rifle) $1.95 ITEM # CARTRIDGE EACH #749-000-170SW 2.50 Rifle Cartridge Sinclair AR-15 Lug Recess Tool #749-006-572SW 223 Remington $61.99 #749-006-573SW 222 Remington 59.99 #749-007-525SW 220 Russian (for PPC) 109.99 #749-009-974SW 22-250 Remington 94.99 F. Otis Micro Cleaning Kits #749-007-270SW 6mm BR Norma 89.99 Compact, inexpensive kits provide the basic necessities to clean rifle bores. Fits easily inside #749-007-313SW 243 Winchester 99.99 nearly any gun case or range bag. Includes a Memory-Flex® cleaning cable with a brass #749-012-558SW 260 Remington 109.49 slotted tip, cotton cleaning patches, bronze bore brush, and a 1/2 oz. tube of O85 Ultra-Bore #749-007-611SW 6.5 Grendel 104.99 Solvent. .17-.22 cal. kit has a 34" cable; .22-30 cal. kit includes a 30" cable. #749-007-672SW 6.5 x 47 Lapua 109.99 #749-007-111SW 6.5 x 55 Swedish 74.99 #668-000-059SW NEW Rimfire Micro Cleaning Kit $12.99 #749-007-835SW 6.5 x 284 Winchester 129.99 #668-000-060SW NEW .22-.30 Cal. Centerfire Micro Cleaning Kit 12.99 #749-006-993SW 308 Winchester 74.99 #749-009-975SW 308 Win Palma 81.99 #749-007-657SW 30-06 Springfield 109.99 #749-101-230SW 7.62x39 59.99 G. Sinclair Offset Scope Level #749-101-231SW 7.62x53R/54R 109.99 #749-101-238SW 9.3x62 119.99 The Sinclair Offset Scope Level helps the #749-000-173SW 338 Lapua Mag. 257.99 shooter avoid loss of accuracy resulting from positioning (canting) the rifle differently each Pistol Cartridge time. The offset allows the shooter to see the #749-101-232SW 32 S&W Long 29.99 level while still behind the scope. Attaches #749-101-235SW 9mm Luger 30.99 to the riflescope like a scope ring and can be positioned so the shooter can see it easi- ly. Machined aluminum construction with a durable matte black anodized finish. Models for 1" and 30mm scope tubes. Can be mounted for use by right-hand or left-hand shooters. Sale prices valid thru Jan. 12, 2015. #749-004-279SW Scope Level (1" Rings) - Black $29.99 $24.99 #749-004-540SW Scope Level (30mm Rings) - Black 31.99 $24.99

H. Birchwood Casey Shoot•N•C® Target No need for spotting scopes or binoculars. When the bullet hits, the black is replaced by a bright halo of fluorescent, chartreuse color that makes the hit instantly visible to the naked eye. Convenient, peel-n-stick, self-adhesive backing. #167-343-150SW 3" Round - 30 Bulls $5.99

I. Brownells High-Capacity AR-15 Magazines These magazines went through much testing, tweaking, and then more testing to make them perfect. They feature a heat-treated aluminum body with a corrosion-resistant anod- ized finish and military-type follower that presents the cartridge correctly. Available in 20- or 30-round capacity with a choice of chrome-silicon (CS) spring or mil-spec anti-corrosion stainless steel (SS) spring. Competition shooters like the chrome-silicon spring because it resists taking a set and provides uniform spring tension for the life of the magazine. Sale prices valid thru Jan. 12, 2015. #078-000-159SW 20-Rd AR-15 Magazine, CS $13.99 $9.99 #078-000-107SW 30-Rd AR-15 Magazine, CS 13.99 $9.99 #078-000-160SW 20-Rd AR-15 Magazine, SS 13.99 $9.99 #078-000-113SW 30-Rd AR-15 Magazine, SS 13.99 $9.99 K J J. MTM Ammo Can .45 Rugged, molded polypropylene ammo can easily holds up to 500 rounds of .45 handgun ammo. O-ring seal system keeps out moisture and dirt, while heavy-duty dual latching system means the lid won’t open accidently. Padlock or zip tie can be fastened to tab between locks for extra security. Comfortable handle is large enough to grip even when wearing gloves. Stackable, too, so a lot of cans take up a small footprint on the floor. Outside dimensions: 10½" (26.7cm) long x 73/8" (18.7cm) wide x 71/8" (18cm) high. Sale prices valid thru Jan. 12, 2015. #100-012-506SW NEW Ammo Can .45 $9.99 $6.99 3 Gifts Under $50

A. Wilson Cartridge B. 6" Digital Caliper Case Gages High-quality digital caliper is built on a stainless steel frame, with an easy to read LCD The most important use of a cartridge case gage is for setting up display. Offers one-touch zero function, and can switch from inches to millimeters on the 7 fly. Sale prices valid thru Jan. 12, 2015. /8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can #749-004-996SW 6" Digital Calipers $39.99 $31.99 quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. C. Sinclair Hex Style Cartridge Case Gage - Regular $26.99 Bullet Comparators Cartridge Case Gage - Adjustable For Belted Mag. Cartridges 33.99 The Sinclair Hex-Style Bullet Comparators are cut with #749-003-948SW Wilson 50 BMG Case Gauge 47.49 throating reamers to accurately duplicate the actual throat of a rifle. There are two different models of the Sinclair Comparator to cover six calibers. Keeps your calipers free for other ITEM # CARTRIDGE TYPE ITEM # CARTRIDGE TYPE measurements #749-003-982SW 22-250 Remington Reg. #749-003-988SW 308 Winchester Reg. #749-003-989SW 223 Remington Reg. #749-003-983SW 30-06 Reg. #749-002-942SW .224, 6mm, .257, 6.5mm, 7mm, .308 $19.99 #749-003-979SW 243 Winchester Reg. #749-058-025SW 300 AAC Blackout Reg. #749-002-933SW .172, .204, .224, .270, .308, and .338 19.99 #749-003-956SW 6.5 Grendel Reg. #749-003-980SW 300 Win Mag Adj. #749-003-958SW 6.8mm Rem SPC Reg. #749-011-860SW 338 Lapua Reg. Pistol Max Gages Pistol Max each $22.99 ITEM # CARTRIDGE Used to check all critical dimensions #749-003-102SW 357 Mag D. Bravo Company BCM Gunfighter of the pistol case - mouth diameter, #749-003-103SW 38 SPL base diameter, rim thickness and #749-003-107SW 9mm Luger AR-15/M16 Charging Handle diameter, case overall length and Heavy-duty charging handle has an bullet diameter. #749-003-104SW 40 S&W #749-003-108SW 45 Auto (ACP) oversized latch that distributes pull force evenly for fast, smooth, reliable opera- For our complete selection of WILSON CARTRIDGE CASE GAGES tion with the support hand. Prevents the and PISTOL MAX GAGES visit Sinclairintl.com critical roll pin from breaking and ren- dering the latch inoperable. Machined from billet aluminum with extra metal reinforcing the stress points to stand up to hard operational use. Available with Medium length extended latch or Large latch that’s ¼" longer for an even bigger, “can’t miss” grasping surface. Small latch duplicates the size of the issue M2A1 Ammo Can latch but includes the same design upgrades as the Medium and Large latches for increased All-steel ammo can originally designed to hold 100 strength and dependability. rounds of linked 50 caliber ammunition can hold #100-005-368SW NEW AR-15 BCM Charging Handle, Large $47.95 hundreds of loose rounds of other ammo. Many other #100-005-369SW NEW AR-15 BCM Charging Handle, Medium 47.95 uses around the workshop or in the field. too. These NEW brand-new Forest Green cans are manufactured to #100-009-442SW AR-15 BCM Charging Handle, Small 47.95 U.S. D.O.D. specs and are not surplus or refurbished. Stackable, with a removable lid with a metal handle that folds down when not in use. Rubber gasket inside lid seals out dirt and moisture. Outside dimensions are 12" long x 61/8" wide x 71/2" high.. #105-000-077SW M2A1 Ammo Can $17.99 E. Howard Leight L0F Slimline Ear Muffs Ultra-slim, ultra-light muffs with super-soft cushions protect your hearing on the range. Slimline ear cups won’t interfere with gunstock so are perfect for shotgun or rifle shooters. Bulldog Extreme Rifle Case Folds for storage. Black cups. Weighs only 4 oz. NRR 23. #749-101-241SW Leightning Super Slimline Folding Earmuff $19.99 Bulldog’s durable, secure case protects your tactical rifle with a water-resistant outer shell made of double-stitched nylon and generous foam padding. The soft, brushed nylon Tricot lining won’t snag on optics, lights, rails, or other accessories when removing weapon. Wrap-around carry handles and adjustable shoulder strap of woven nylon webbing won’t tear under hard use. Zippered exterior pocket gives you fast access to ammo, accessories, and other gear without opening the main compart- ment. Includes exterior pouches, with hook-and-loop flaps, for four 30-round AR-15 magazines. F. Viking Tactics VTAC-MK1 #100-005-031SW NEW Assault Rifle Case, 40" $29.99 Quick-Adjust Sling Black nylon web sling can be adjust- ed from carry to firing configuration while you move into position. After fir- ing, a quick tug on the lanyard returns it to carry position. Designed to carry gun muzzle down on your back to keep your hands free, and ease movement through brush. Fits 1" sling swivels. Length adjusts to fit rifles from MSR carbines to magnum bolt actions. #100-000-669SW V-TAC Sling, Black $34.95 4 B E

A C F G H D

L I K J

G. Check-Mate J. Magpul AR-15/M16 ASAP M14/M1AMagazines Sling Adapter All-steel magazines are built for dependable, reliable operation in competition and tactical Ambidextrous Sling Attachment Point helps the operator adapt ops. Features a welded magazine body, precision wound spring, and steel follower to help quickly to changing tactical situations by rapidly switching weap- ensure reliable feeding, plus a removable floorplate for easy cleaning. Available in carbon on from one shoulder to the other. An unrestricted 180° of sling steel with mil-spec Parkerized finish that resists corrosion, or in weather-resistant polished movement lets you change shoulders to take maximum advantage stainless steel that includes a Teflon® coated steel follower. of available cover, address targets around corners and other barri- #100-004-088SW NEW 5-Rd Steel Magazine $22.99 ers, or shift weapon position if one arm is injured. Works with any NEW single-point sling that attaches with a quick-release snap-hook, and #100-004-089SW 10-Rd Steel Magazine 24.99 fits any AR with an M4-type adjustable buttstock. Remove factory #100-004-090SW NEW 15-Rd Steel Magazine 29.99 receiver end plate and replace with the ASAP; keep the original #100-004-091SW NEW 20-Rd Steel Magazine 27.99 receiver extension, buttstock, and sling. #100-004-092SW NEW 20-Rd Stainless Steel Magazine 29.99 #100-004-093SW NEW 25-Rd Steel Magazine 34.99 #100-004-450SW NEW ASAP Sling Adapter $29.99

H. Bore Tech Bore Bright K. GG&G M14/M1A Versatile bore light powered by a Chamber Cleaning Tool ® Streamlight Stylus 3 flashlight and Rugged tool has a universal joint that helps you achieve just the a fiber optic diffuser provides a soft, right angle for thorough cleaning of the chamber. Tip is made blue/white light that evenly illu- from long-lasting yet non-marring aluminum, with a deep, minates the bore. A magnet holds 11/2" long slot that accepts any 13/4" or 2" square clean- the light on the receiver for hands- ing patch. Rubber-coated, non-slip plastic handle free viewing, while the flexible fiber gives you a secure grip on the tool for applica- optic rod reaches deep inside actions. Dual-mode control switch gives momentary-on or tion of maximum cleaning torque. steady-on output. Sale prices valid thru Jan. 12, 2015. #509-000-017SW NEW Bore Bright $54.99 $49.99 #336-000-030SW NEW Chamber Cleaning Tool $29.99

I. 8000 Series Rifle Kit L. Sinclair 8000 Series with Power Adapter Primer Pocket Uniformer Kit Makes primer pocket uniforming even easier by enlist- The Sinclair 8000 Series Uniformers are precision ground from ing the aid of your power screwdriver or electric drill. one solid piece of tungsten carbide, so there is no need to worry The included adapter attaches to the power tool and about changing the depth of cut. These cutters will cut the in turn accepts the included large rifle and small rifle primer pocket to a uniform depth and also square the bottom uniformers. of the pocket in relationship to the case head. Kit contains a Sale prices valid thru Jan. 12, 2015. large rifle uniformer, a small rifle uniformer, and a handle. Sale prices valid thru Jan. 12, 2015. #749-006-355SW 8000 Series Small & Large Rifle #749-006-347SW 8000 Series Small & Large Rifle Uniformers, w/Power Adapter $54.95 $49.99 Uniformers, w/Handle $54.95 $49.99 5 Gifts Under $100 A. Voodoo Tactical E. Little Crow Gunworks Padded Weapons Case “World’s Finest” Case Trimmer 2 Heavy-duty padded case holds The “World’s Finest Trimmer 2” builds on the original WFT by two rifles, two pistols, and extra using a system of interchangeable trim chambers, so you can trim a gear. Main compartment has thick variety of cases without having to invest in a separate trimmer for each one. You purchase foam on all six sides with plenty of the WFT2 trimmer body, then only the chamber insert for each cartridge you need to trim. room for rifles up to 41" in length. Swapping chambers is as easy as loosening two setscrews, pushing the chamber out with a Adjustable straps inside keep your wooden dowel, and inserting the new one. Shaft fits a 1/2" drill chuck. Does not chamfer or rifles securely in place, while cor- deburr the case mouth. ner pockets protect the muzzle and #749-014-410SW World’s Finest Trimmer 2 Body $69.99 buttstock. A cushioned internal divider prevents the rifles from rubbing together. Inside the big external compartment For our complete selection of WORLD’S FINEST CASE TRIMMER 2 CHAMBERS you’ll find two padded pockets for pistols, optics, or more small stuff. Three more exterior visit Sinclairintl.com pouches will hold boxes of ammo, a cleaning kit, or spare magazines. External MOLLE loops allow you to attach additional gear. Carry by the padded handle, detachable shoulder strap, or the back pack-style shoulder harness.

#100-012-718SW Padded Weapons Case, Black $99.99 F. Leupold QRW™Series Rings #100-012-639SW Padded Weapons Case, Purple 99.99 QRW (Quick Release Weaver-style) rings have a double-lever mechanism that locks them onto any Weaver-style cross-slot base, including Leupold’s QRW bases (below). They let you remove the scope from the rifle for travel, use one scope on multiple rifles, or switch from one scope for bench work to a different one for hunting. Four Torx® screws secure the cap. Height measured from the top of base to center of ring: 1" Rings - Low (.750"), Med (.880"), B. CTK Precision High (1.000"); 30mm Rings - Low (.840"), Med (.970"), High (1.090"). Universal Brass Catcher 1" 1" 30mm The CTK Brass Catcher has a big, 16" x 16" net that easily HEIGHT FINISH $61.99 $66.99 $77.99 snags spent pistol or rifle cases as they’re ejected, so you Low Gloss Black #526-498-001SW NA #749-006-914SW don’t have to scrounge on the ground for your brass. Keeps Low Matte Black #526-498-530SW NA #526-498-610SW it from hitting other shooters on the line, too. A heavy duty Low Silver NA #526-498-540SW NA steel frame with a durable E-Coat finish supports the nylon Med. Gloss Black #526-498-550SW NA #749-006-915SW net. The weighted base creates a low center of gravity, so Med. Matte Black #526-498-560SW NA #526-498-630SW the Catcher won’t tip on the bench or when placed on the Med. Silver NA #749-006-404SW NA ground to shoot in the prone position. Optional camera High Gloss Black #749-006-402SW NA #526-498-640SW tripod attachment (1/4"–20 thread) even lets you use it High Matte Black #526-498-580SW NA #526-498-650SW when shooting offhand. High Silver NA #749-006-403SW NA #749-012-246SW Universal Brass Catcher $59.95 Leupold QRW™Series 2 Piece Bases The Leupold QRW bases are a great way to upgrade your existing aluminum Weaver style bases with steel. Paired up with QRW rings, they’ll give you a rock solid scope mount. All C. Sinclair bases have Torx® drive screws and include a Torx wrench. Concentricity Gauge ITEM # FITS FINISH The Sinclair Concentricity Gauge is used #749-004-796SW Rem 700/40X Gloss Black $34.99 to measure runout by rotating the case #526-498-410SW Rem 700/721/722/725, 40X, SA & LA, RH & LH Matte Black 34.99 or loaded round on two sets of bearings *Accepts larger cases #749-004-718SW Rem 700/40X Silver 43.99 that are captured in anodized aluminum up to and including #749-004-794SW Savage 110-116 Gloss Black 34.99 50 BMG blocks. This arrangement provides the #526-498-380SW Win 70, SA & LA (does not fit Express model) Matte Black 34.99 best support for the cartridge, enabling #526-498-360SW NEW Win 70 Express, Pre-’64 w/.435" rear hole Matte Black 34.99 the user to spin the cartridge smoothly. #526-498-350SW NEW Win 70 Express, Post-’64 w/.330" rear hole Matte Black 34.99 Measure fixed cases, sized cases or load- ed rounds to determine where potential problems may exist. Sale prices valid thru Jan. 12, 2015. G. Accurate-Mag Detachable #749-007-305SW Concentricity Gauge w/.001" Dial Remington 700 Magazine Indicator $113.99 $99.99 These mags fit AICS-compatible rifles and tactical bottom metal. Heat-treated steel body #749-007-902SW Concentricity Gauge w/Digital is Teflon-coated and comes with a self-lubricating polymer follower for smooth feeding. Indicator 143.99 $129.99 Available for short actions, standard long actions (3.715"), and the extra long (3.775" and 3.850") actions . The 3.775" and 3.850" magazines are slightly longer than the standard magnum and fit only long actions and bottom metal that accepts a longer box, such as the Remington Police rifle in .338 Lapua, the AICS long action stock, and the Modular Driven Technologies TAC 21 long action chassis. D. Howard Leight Impact™ Sport #100-012-475SW NEW .223 Rem 700, 10-Rd $69.99 #100-008-953SW NEW .308 Rem 700 Magazine, 5-Rd 66.99 Impact Sport electronic earmuffs protect your hearing from hazardous noise, while allow- #100-008-954SW NEW .308 Rem 700 Magazine, 10-Rd 72.99 ing you to clearly hear range commands and other ambient sounds. Built-in directional #100-008-956SW NEW 77.99 microphones automatically shut off to keep a loud impulse noise at a safe 82dB level. Sleek, .300 Win Mag Rem 700 Magazine, 3.715"/5-Rd low-profile earcups are designed to clear a buttstock. An auxiliary jack lets you connect an #100-008-958SW NEW .300 Win Mag Rem 700 Magazine, 3.775"/5-Rd 84.99 MP3 player, or scanner, while power and volume are adjusted with a single control knob. #100-012-488SW NEW .300 Win Mag Rem 700, 3.850"/5-Rd 89.99 Automatically shuts off after 4 hours to increase life of the two AAA batteries. NRR 22. #100-008-955SW NEW .338 Lapua Rem 700 Magazine, 3.715"/5-Rd 77.99 #100-008-957SW NEW .338 Lapua Rem 700 Magazine, 3.775"/5-Rd 84.99 #100-004-644SW Impact Sport Electronic Muffs $53.99 #100-012-489SW NEW .338 Lapua Rem 700 Magazine, 3.850"/5-Rd 89.99 6 A B

C

D

E

H Gift-giving made simple… Sinclair International I Gift Cards! Sinclair International Gift Cards are the perfect choice for your gift-giving needs. You can purchase a Sinclair International Gift Card F and have it mailed to you or directly to the lucky recipient. Or you can choose our electronic Gift Card and have it delivered to your email inbox instantly! G

H. Sinclair Priming Tool I. Sinclair Scope Ring The Sinclair Priming Tool is one Alignment Tool of the finest tools we manufacture. Our Scope Ring Alignment Handloaders around the world have Tool enables any shoot- told us “this is the best priming tool in er to properly align and the world”. There are NO plastic parts install both 30mm and to wear or break. The main body, head, 1" scope rings from any and punch housings are all made of manufacturer. Using the stainless steel, the handle is machined Alignment Tool before from aircraft-grade aluminum, and the lapping scope rings will pins and pushrod are hardened. reduce the amount of Comes complete with housings and lapping needed for a punches for both large and small prim- perfect scope tube fit ers. This tool is designed strictly for single-feed “one-at-a-time" priming”. The tool head uses in the rings. This tool Sinclair Priming Tool shellholders (available from Sinclairintl.com) and locks the case head goes beyond the tradi- square to the priming punch. The leverage of the tool is outstanding, yet extremely sensitive tional “pointed rod” style tools in that the alignment rods are adjustable within the two so you can feel the primer entering the primer pocket and bottoming out. tool bodies after the bodies are mounted in the scope rings no more loosening the ring Additional priming tool heads are listed below for those wanting an extra head so they can several times to adjust the rod point lengths. The rods are held in the tool bodies by preci- leave their favorite shellholders installed. Sale prices valid thru Jan. 12, 2015. sion machined collets which exactly center the rods when they are snugged. The stepped tool bodies are machined, clear anodized aluminum with cylinder sizes to fit 1" rings and 30mm rings. This tool is easy to use, and makes correct scope mounting much easier. #749-007-603SW Sinclair Priming Tool, w/o Shellholder $119.99 $99.99 Sale prices valid thru Jan. 12, 2015. #749-002-925SW Additional Priming Tool Heads (Optional) 18.95 #749-001-152SW Priming Tool Soft Case 9.95 #749-006-613SW Sinclair Scope Ring Alignment Tool $69.99 $62.99 7 Gifts Over $100

G A E C

H

B F

E

D

A. Sinclair Stainless Steel C. Competitive Ultimate Trimmer Edge Dynamics We’ve paired the most accurate trimmer in the world with our Sinclair Micrometer head M2 Chronograph to create the Sinclair Stainless Ultimate Trimmer. The Wilson Case Trimmer aligns and This compact chrony puts advanced technology at your holds your cases square to the cutter during the trim process. It is accomplished with fingertips to help you determine best loads. Large, Wilson’s unique case holder system which holds the case by the body taper. The trimmer easy-to-read LCD screen records velocities from 50 case holder, cutter housing, and micrometer adjustment unit sit in perfect alignment. fps to 7,000 fps and provides output data in feet or Our Sinclair Micrometer head allows the reloader to easily adjust trim length in meters. Voice chip technology lets you hear each shot. increments of .001" with an adjustment length of over 2". Determine your trim Permanent memory stores up to 500 shot strings, or length, dial to the exact length on the micrometer, and you’re ready – it’s that simple. 1,000 shots total. Convenient, one-touch calculation Sale prices valid thru Jan. 12, 2015. of IPSC/IDPA Power Factors, plus a built-in calculator #749-101-020SW Sinclair SS Ultimate Trimmer, Only $189.99 $169.99 to make crunching numbers in the field easy. Data Collector software and USB 2.0 cable let you store data for permanent reference on a PC. Low battery indicator and no-data-loss auto shutdown mode help preserve battery life. Moisture resistant key pad provides quick access to data. Includes two skyscreens, 20' shielded cable, and 2' mounting bracket/tripod adapter. B. Brownells/Otis Gun Cleaning Kit #399-000-012SW NEW CED M2 Chronograph $199.99 THE do-it-all, clean-it-all kit! Sets you up to clean any gun from a .17 varmint rifle to a 10 gauge shot- gun - and everything in between. Packed with more than 200 Brownells and Otis D. JP Enterprises products, including slotted tips, bronze JPSCS Silent bore and chamber brushes for .17/.22/.25/ .27/.30/.35/.38/.41/.45/.50 caliber rifles and Captured Spring System pistols, plus 12/16/20/28 gauge and .410 Drop-in captured-spring recoil system helps your bore shotguns. Also plenty of patches, a AR function more smoothly and quieter without dual-ended nylon receiver brush, chamber any permanent modifications. The carefully balanced, custom-ground buffer spring, com- flag; Memory-Flex cleaning cable-rods in bined with the JP LMOS buffer, greatly reduces friction and vibration - say goodbye to the five lengths; O85 Bore Cleaner & Lubricant; annoying "spoon over a cheese grater" noise of conventional springs and buffers. Fits buffer and scrapers, picks, adapters, obstruction tubes for both M4-style collapsible stocks and also, using the included spacer, the longer removal tool, and much more. Comes tubes for fixed rifle stocks. JPSCS-15 fits AR-15/M16/M4. JPSCS-10 fits AR-style .308 rifles, with a separately packaged, go-anywhere, including DPMS LR-308, ArmaLite® AR-10®. Does not fit Rock River Arms LAR-8. belt-adaptable Otis #750 rifle cleaning kit for quick field cleaning. #452-000-149SW NEW JPSCS-15 Silent Spring System $137.99 #668-000-016SW NEW Brownells/Otis Elite Cleaning Kit $118.99 #452-000-150SW NEW JPSCS-10 Silent Spring System 137.99 8 E. Thumler’s Model “B” Rotary Tumbler and H. Vortex SPARC II Red Dot Sight Stainless Steel Media Compact and lightweight, the "Speed Point Aiming Thumler’s heavy-duty Model “B” tumbler has a for Rapid Combat" sight is ideal for the AR-15/ large-capacity drum that easily handles up to 15 lbs. M16 platform or a tactical shotgun. The one-piece of material for high-volume runs to help you clean aluminum body is O-ring sealed and nitrogen a lot of brass fast. Stainless steel pin media does an purged for waterproof and fogproof performance. exceptional job of cleaning heavily tarnished cases, Fully multicoated lenses increase light transmis- both inside and outside—including the primer pock- sion for vibrant colors and parallax-free shooting. ets. Never wears out, doesn’t need to be “renewed” Rear-facing controls let you adjust the 2 MOA red like treated organic media, and won’t harm the brass. aiming dot with 10-step adjustable brightness for Stainless steel media (5 lbs.) also available separately. operation in many lighting conditions. Versatile A favorite of serious reloaders. multi-height mount system fits many firearms including AR-15s needing absolute or lower 1/3 #749-012-773SW Model B Tumbler 110V, w/SS Media $229.99 co-witness heights, and mounts on standard Weaver or Picatinny rails. Includes flip-up #749-012-602SW Stainless Steel Media, 5 lbs. 46.99 lense covers and CR-2032 battery. #749-012-607SW Model B Tumbler 110V, Only 189.99 #100-014-334SW NEW SPARC II Red Dot Sight $199.99

F. Competition Electronics ProChrono Digital Champion Shooters Supply Chronograph Standard Roll Up Mat The Pro Chrono is a compact, full-featured chronograph The Champion Shooting Mat is constructed of soil-resistant canvas and features a 25" x 21" that accurately measures velocity readings from 22 to sure grip rubber shooting area for establishing a steady shooting position. It includes a vinyl 7,000 feet per second. Lets you record up to 9 strings of 99 waterproof bottom and measures 26" x 72" long. A great shooting mat for both High Power shots each and then review the data to find average veloc- and Smallbore shooting. ity, standard deviation, and extreme spread. The optional PC USB Interface kit has everything needed to control all of the chronograph functions from your Microsoft #749-007-546SW Champion Standard Roll Up Mat $102.95 Windows-based computer, so you can list velocity strings, compute ft./lbs. of energy, power factors, and even create graphs for easy data comparison and interpretation. The unit is extremely light and portable and comes with 1/4"-20 threads in the base for easy mounting to a standard camera tripod. #225-100-101SW ProChrono Digital Chronograph $119.95 #225-000-004SW ProChrono PC USB Interface Kit 49.95

G. Hornady Lock-N-Load Auto Progressive Press (AP) This automatic, five station press lets you switch your reloading dies and accessories without changing the entire tool head. With a quick twist, the Lock-N-Load inserts allow you to engage or disengage your accesso- ries in each station. The solid top-plate construction means you’ll never have to purchase additional tool plates. You may also use 7/8"-14 dies and powder measures from your other favorite manufacturers by installing Lock-N-Load bushing inserts. Sale prices valid thru Jan. 12, 2015. #749-008-417SW Lock-N-Load Auto Progressive Press $449.99 $409.99 #749-002-177SW Lock-N-Load Bushing Set, 3-Pak 14.99 #749-005-409SW Lock-N-Load Bushing Set, 10-Pak 41.99 #749-003-013SW Lock-N-Load AP Dust Cover 24.99

See back cover or REBATE www.sinclairintl.com/rebates for details.

These other Hornady AP accessories enable you to have the fastest cartridge conversion on the market. Ask any of our customer service representatives to explain the upgrade options. #749-001-312SW Standard Metering Insert, 5 to 100 Grains $12.99 #749-002-664SW Quick-Change Powder Die 24.99 #749-005-143SW Powder Cop Automatic Powder Check 30.99 PTX™ Powder Thru Expanders for Powder Dies $9.99 ITEM # SIZE ITEM # SIZE ITEM # SIZE #749-011-682SW .355 #749-012-125SW .430 #749-012-177SW .475 #749-012-056SW .357 #749-012-057SW .451 #749-012-124SW .400 #749-012-176SW .452 9 Case Prep & Measuring Tools A. Lyman Case Prep Xpress™ A Case Prep Xpress makes quick work of prepping brass, because it includes all the most popular case prep acces- sories, driven by a single high-torque motor — nothing else to buy to get started. Quick, easy cleanup, just brush all your brass chips into the removable collection pan. Includes: Inside Deburr (VLD) Tool, Outside Deburr Tool, Flash Hole Uniformer, Primer Pocket Uniformer (Large and Small), Primer Pocket Reamer (Large and Small), Primer Pocket Cleaner (Large and Small), Case Neck Brushes (.25, .30, .38 and .45 calibers), Case Neck Lube (Mica), Removable Dump Pan and Clean-up Brush. 125 RPM tool speed. Sale prices valid thru Jan. 12, 2015. #749-012-596SW Case Prep Xpress, 110 volt $129.99 $109.99

B. Redding Match Precision Case Trimming Lathe This case trimmer delivers the same features as the standard Redding Trimmer plus the extra benefits of a case length micrometer and pushbutton chuck lock. Cast iron frame trims cases up to 31/4" in length. The micrometer is easy to read and makes quick and precise case length adjustments in increments of .001". Redding’s pushbutton chuck lock simplifies case loading and unloading and facilitates perfect alignment of the case between the collet and pilot. Includes six case pilots – .22 cal, 6mm, .25 cal, .270 cal, 7mm, and .30 cal., two neck cleaning brushes .22 thru .30 cal and large and small primer pocket cleaners. #749-008-038SW Match Precision Case Trimming Lathe $159.99 B For full REDDING TRIMMER PILOT selection visit Sinclairintl.com

C. Sinclair Piloted Flash Hole Deburring Tool The Sinclair Piloted Flash Hole Deburring Tool will work on .22 caliber through .45 caliber using the stainless steel Neck Pilots. This tool indexes off of the case mouth (trim length) to determine the correct depth of cut. Change calibers simply by switching the stainless steel Sinclair pilot. The tool steel cutter makes clean cuts, while the large, comfortable Sinclair handle gives you excellent control. Tool sold without pilots - order only the pilots you need, C separately, by specific caliber. #749-002-941SW Sinclair Piloted Flash Hole Tool $23.99 #749-001-324SW Sinclair Piloted Flash Hole Reamer - w/o Handle 19.99 D For full STAINLESS STEEL PILOT selection visit Sinclairintl.com

D. Sinclair Case Mouth Deburring Tool Holder E Remove burrs from your cases efficiently with the Sinclair Deburring Tool Holder and your case mouth deburring tool. Use in a drill or power screwdriver to quickly debur your case mouths. The stainless steel holder will work with Wilson deburring tools, current Forster deburring tools, and RCBS deburring tools. #749-002-628SW Sinclair Case Mouth Deburring Tool, Holder Only $16.99 A Must-Have #749-004-354SW Sinclair/Wilson Deburring Tool Holder Kit 29.99 for EVERY Reloader! E. Quinetics Bullet Puller Kinetic style bullet puller for removing bullets from loaded centerfire cartridges. Does not damage the components. Sale prices valid thru Jan. 12, 2015. #734-001-000SW Quinetics Bullet Puller $21.99 $18.99

F. Hornady Lock-N-Load Ammo Concentricity Tool The Hornady Lock-N-Load Ammo Concentricity Tool enables the hand loader to identify the bullet runout of each cartridge, and then eliminate it. Once a loaded round is inserted into the Lock-N-Load Ammo Concentricity Tool, F the dial indicator is used to adjust the cartridge runout to zero. Easy to set up, and easy to fine-tune your rounds. We’ve found the Hornady Lock-N-Load Ammo Concentricity Tool to be especially helpful with factory ammunition. #749-007-534SW Hornady Lock-N-Load Ammo Concentricity Gauge $99.99

ITEM # DESCRIPTION Sinclair Driver and Caseholders Case Holders The Sinclair Driver and Caseholder system is designed to hold and turn your #749-002-489SW #1 222, 223 Family $14.95 case while you are neck turning, cleaning case necks, or deburring case #749-002-494SW #2 22 PPC/6 PPC 14.95 mouths. The caseholders and driver are machined from stainless steel, #749-002-493SW #3 BR, 243, 6.5/284, 308, 30-06 14.95 and the driver has a standard ¼" hex shaft for use in power screw- #749-002-490SW #4 Belted Mags, WSM, Ultra Mags 14.95 drivers or low-speed drills. The driver is universal to the Sinclair sys- #749-002-485SW #6 220 Swift 14.95 tem and will work with all the caseholders listed to the right. You can #749-011-519SW #7 338 Lapua Mag 14.95 purchase the Driver and the caseholders separately, or in a kit with the #749-011-520SW #8 408 Cheytac 14.99 Driver and dedicated caseholders for 3 of the most popular case head Universal Case Holders sizes: 222/223, 308/30-06, and Belted/Ultra Magnums. #749-003-251SW Universal Caseholder Only 21.95 #749-013-387SW Driver w/#1, #3 & #4 Caseholders 49.99 #749-002-109SW Sinclair Caseholder Driver $12.95 #749-011-486SW Universal Caseholder/Driver Kit 29.95 10 A. Sinclair Bullet Seating Depth Tool The Sinclair Seating Depth Tool helps you determine the length of a loaded round touching A the rifling. This length is generally considered to be the best starting point in load develop- ment and the best length for fireforming cases. The tool works with bolt action, single shot, and AR-15 type rifles, even .17 and .20 caliber rifles. Comes with a Delrin™ action guide for common bolt-actions (Remingtons, Savages, Winchesters, and Rugers), a stainless steel measuring shaft, two stainless steel stop collars, and complete illustrated instructions. For bolt-actions other than those listed above, you’ll need to order an additional action guide, sold separately. AR-15 and AR-style .308 guides are for shooters who load single-shot rounds longer than magazine length. Sale prices valid thru Jan. 12, 2015. #749-004-650SW Sinclair Seating Depth Tool with Standard Guide $33.99 $23.99 #749-008-968SW Action Guide for AR-15 9.99 #749-008-962SW Action Guide for AR-308 9.99 C For additional BOLT ACTION GUIDES visit Sinclairintl.com B B. Redding Case Neck Gauge D The Redding Case Neck Gauge help you quickly and accurately sort cases by neck wall thickness, concentricity, and runout. Comes with a large, easy-to-read dial indicator - no need to purchase one separately or “borrow” one from another piece of equipment before you can measure cases. The indicator is calibrated in increments of .001" to accurately measure case neck uniformity, a requirement for precision reloading. Includes large 3/16" diameter mandrel and small 9/64" diameter mandrel for use with .060" flash holes. A sepa- rate pilot stop is required for each caliber; comes with 22 caliber and 30 caliber pilot stops. Stops for other calibers are available below. Each pilot stop is machined stainless steel, slightly undercut for a snug fit in the case mouth and smooth, accurate indicator readings. #749-101-759SW Redding Case Neck Gauge w/ Dial Indicator $89.99 C. Redding Stainless Steel Pilot Stops E. Sinclair Bullet Comparator Stainless Steel Pilot Stops $8.99 & Bump Gages ITEM # MANDREL SIZE ITEM # MANDREL SIZE The Sinclair Comparator Body may be used with either our comparator inserts to measure #749-101-743SW 17 cal Small #749-101-750SW 6.5mm Large ogive length, or our bump gage inserts for determining your cartridge headspace. We #749-101-744SW 20 cal. Small #749-101-751SW 270 cal. Large feel that a comparator and bump gage tool is a “must-have” for safe, accurate reloading. #749-101-745SW 22 cal. Small #749-101-752SW 7mm Large See available options below, or call one of our reloading technicians to learn more about #749-101-746SW 22 cal. Large #749-011-141SW 30 cal. Large headspace. #749-101-747SW 6mm Small #749-101-753SW 31 cal. Large #749-101-748SW 6mm Large #749-101-754SW 8mm Large #749-002-552SW Standard Comparator/Bump Gage Body $15.99 #749-101-749SW 25 cal. Large #749-101-755SW 338 cal. Large #749-011-959SW XL Comparator/Bump Gage Body (loaded rounds) 15.99 Sinclair Comparator Inserts $7.95 ITEM # CALIBER ITEM # CALIBER #749-000-924SW 17 #749-000-926SW 338 D. Sinclair Bullet Sorting Stand #749-000-927SW 20 #749-000-920SW 35 The Sinclair Bullet Sorting Stand helps you quickly and accurately sort bullets by base-to- #749-000-928SW 22 #749-011-512SW 9.3mm ogive length. Black granite base is perfectly flat and heavy enough to stay where you want it on #749-000-929SW 6mm #749-000-917SW 375 your loading bench. The included dial indicator features lever control for easy insertion and #749-000-922SW 25 #749-011-510SW 408 Cheytac* removal of bullets into comparators. It also allows the choice of using single point or an 11mm #749-000-930SW 6.5mm #749-000-918SW 416* flat indicator tip (complete dial or digital indicator also available separately). Comparators are #749-000-923SW 270 #749-009-372SW 404 Jeffery sold separately and available in .22, 6mm, 6.5mm, 7mm, .30, and .338 caliber or can be used #749-000-925SW 7mm #749-011-511SW 44 with either of our hex comparators. Sale prices valid thru Jan. 12, 2015. #749-000-931SW 30 #749-000-921SW 45 #749-011-469SW Sinclair Bullet Sorting Stand #749-000-919SW 8mm * Recommend using w/XL Body w/Dial Indicator $79.95 $64.99 #749-101-349SW Sinclair Bullet Sorting Stand w/Digital Indicator 110.95 Bump Gage Inserts $9.95 #749-011-470SW Sinclair Bullet Sorting Stand w/o Indicator 59.95 #749-009-439SW Dial Indicator w/Lever and Flat Point – Only 29.99 SHOULDER CARTRIDGE #749-101-731SW Digital Indicator w/Lever and Flat Point – Only 69.99 ITEM # ANGLE LIST #749-011-476SW 17° 30-06 Family For full QUICK SORTING COMPARATOR selection visit Sinclairintl.com #749-011-477SW 20° 308 Family #749-011-478SW 20° 338 Lapua #749-011-471SW 21° 220 Swift E #749-011-473SW 23° 223 Family (222 Rem, 17 Rem, etc.) #749-011-480SW 23° 6.8 SPC #749-011-485SW 25° Most Standard Magnums #749-011-474SW 26° 6mm Rem #749-011-472SW 28° 22-250, 223/243 WSSM, Some Ackley Improved #749-011-484SW 30° 17 Fireball, 22/6mm PPC and BR, 204 Ruger #749-011-481SW 30° 7mm & 30 BR, Remington Ultra Mags Up To 338 cal #749-011-475SW 35° 284 Family, WSM Family #749-011-482SW 40° Ackley Improved Up To 6mm #749-011-483SW 40° Ackley Improved Cartridges Up To 338 cal #749-011-479SW 45° Wildcat Cartridges w/45° Shoulder 11 Powder Handling &Reloading Presses A. Redding 3BR Powder Measure E. RCBS Chargemaster™ REBATE The 3BR is the Redding workhorse. It comes equipped with a quick-change micrometer Dispenser/Scale Combo insert, and a mounting bracket. Will work with most other bench stands. This measure See back cover or 1 The Chargemaster Scale and Chargemaster Automatic Powder www.sinclairintl.com/rebates throws powder charges from 5 to 100 grains with the universal (rifle) insert and /2 to 10 Dispenser form a powder dispensing system that’s fast and for details. grains with the pistol insert. The 3BR can be ordered with either insert. Redding powder accurate. Accurately weighs and dispenses all extruded (stick), measures work perfectly in the Sinclair Powder Measure Stand. ball (spherical), and flake smokeless powder from 2 to 300 grains +/- 0.1 grain. For use with #749-008-014SW 3BR with Universal (Rifle) Insert $153.99 smokeless powder only, not to be used with black powder. On-board memory lets you store up to 30 of your favorite loads. The front to back layout allows easy access to the scale for right or left-handed users. Sale prices valid thru Jan. 12, 2015. #749-008-386SW Chargemaster Combo, 110V $349.99 $329.99 B. Harrell Classic Culver Measure This is the top-of-the-line Harrell powder measure, and there is probably no finer Culver style powder measure available. The Classic features Harrell’s double roller bearing con- struction, polished and nickel plated main body, green anodized top and bottom sections F. GemPro™-250 Digital which screw off and large 16 oz. powder bottle threads. This measure throws from 6 to 120 Precision Scale grains and comes with two four inch drop tubes and one 16 oz. plugged powder bottle. Sale prices valid thru Jan. 12, 2015. Delivers super-fine accuracy to .02 grain and a 771.72 grain capacity for consistent readings in six output modes: grains, ounces, grams, carats, pennyweights, and troy ounces. Features #749-008-396SW Harrell Classic Culver Powder Measure $359.99 $329.99 include with adjustable stabilization feet, full tare capabilities, and three calibration settings: pre-calibration, sensitivity (or standard) calibration, and linear calibration. Runs with a supplied AC wall adapter or four AAA batteries (not included), and can be programmed for automatic shut-off to save power. Includes a stainless steel circular tray, plastic scoop/bowl with pour lip, plastic tweezers, bubble level, a 20g test weight, and instructions. 5¼" long x C. Sinclair Powder Measure Stands 3¾" wide x 2½" high with cover. Sale prices valid thru Jan. 12, 2015. Our powder measure stand doesn’t have to be bolted down, its height is easy to adjust, and it #100-013-600SW GemPro-250 Precision Scale $149.99 $139.99 can easily accommodate different bench thicknesses. It’s handy for shooters who don’t have room for a permanent measure stand on their reloading bench. Fits easily in a field box, so it’s ready to go when you take your powder measure to the range or a match. Three points of contact ensure a secure, non-slip installation wherever you mount it. Adjustable height, so you can raise or lower the stand to put the drop tube in the most comfortable position. We have one model for custom powder measures and another for standard 7/8"-14 measures. G. Satern Aluminum Powder Funnels Constructed with 7/8" diameter stainless steel tubing. Sale prices valid thru Jan. 12, 2015. These caliber-specific powder funnels sit on top of your cases, so you don’t have to hold them in place. The large (21/2") spun aluminum funnel body is completely static-free, and the #749-005-679SW Sinclair Powder Measure Stand - machined brass tip stabilizes the funnel on top of the case. When you dump your scale pan C-Clamp Measures Like Harrells $48.99 $39.99 into the funnel, the powder glides right into the case. We think these funnels are fantastic! #749-005-752SW Sinclair Powder Measure Stand - 7 Note: For WSSM Cartridges, use the next size up funnel. (Example: 223 WSSM shoot- /8"-14 Measures Like Redding or RCBS 47.99 $39.99 ers should order 6mm funnel.) Funnels $12.49 Funnels $19.99 ITEM # CALIBER ITEM # CALIBER D. Lyman Micro-Touch™ 1500 #749-001-848SW 17 Cal. #749-003-012SW 338 Cal. #749-001-865SW 20 Cal. #749-003-004SW 35 Cal. Electronic Reloading Scale #749-001-870SW 22 Cal. #749-003-007SW 375 Cal. Lyman’s compact Micro-Touch 1500 electronic scale has a generous 1,500-grain capacity #749-001-860SW 6mm #812-000-011SW NEW 40 Cal. and is accurate to 1/10 of a grain. Touch-screen controls make it easy to use, and the readout #749-001-845SW 25 Cal. #812-000-013SW NEW 416 Cal. can be set to grains or grams. The 1500 can be powered by AAA batteries or the included #749-001-849SW 6.5mm #812-000-012SW NEW 44 Cal. AC adapter, so you can use it on your bench, at the range, in camp - anywhere you need 1 1 1 #749-001-837SW 270 Cal. #749-003-005SW 458 Cal. it. Compact, too: only 5 /2" long x 3 /4" wide x 1 /4" tall. Hinged dust cover protects the pan, #749-001-846SW 7mm #749-003-006SW 50 Cal. which is designed to let you pour powder directly into a case. Includes operating instruc- #749-001-871SW 30 Cal. #812-000-014SW NEW 12.7x42mm (.50 Beowulf compatible) tions and a 100 gram check weight. #749-003-035SW 8mm #749-003-016SW 22-30 Cal. Universal #100-020-158SW Micro-Touch 1500 Electronic Scale – 115V $58.99 $49.99 #812-000-010SW NEW 9mm #749-003-011SW 30-50 Cal. Universal

F D

B A

E G C

12 A. Redding T-7 Turret Reloading Press The T-7 Turret Press features a seven station turret head, cast iron construction, and power- ful compound linkage. Its rear casting supports the rock-solid turret for precise alignment. The rugged 1" diameter ram accepts standard 7⁄8"-14 dies, including longer Competition dies. Purchase additional interchangeable turret heads so you can have a turret fitted with the dies for every cartridge you load - then just swap turrets to set up for a different load. Handy Automatic Primer Feed Assembly also available separately. #749-008-321SW Redding T-7 Turret Press $279.99 #749-006-610SW Additional Redding T-7 Turret Head 69.99 B #749-005-480SW Automatic Primer Feed Assembly 43.99

B. Forster Co-Ax Reloading Press This heavy-duty press has innovative features that make it one of the best reloading presses A C for threaded dies on the market. The design includes: 1) Snap-in, snap-out die change sys- tem that make die swapping a two-second operation, 2) Automatic self-acting shellholder that supports the case with spring-loaded jaws, 3) Spent primer catcher that collects the dead primers and carbon gunk in a container. #749-008-316SW Forster Co-Ax Reloading Press $305.99 #749-000-312SW Forster Cross Bolt Lock Ring 4.99

C. RCBS Rock Chucker™ Supreme D Reloading Press The Rock Chucker Supreme Press has been one of the most pop- ular single stage reloading presses in the world for many years. The current model is long enough to easily accommodate some REBATE of today’s longer cartridges. This press has outstanding strength See back cover or E and versatility, and will serve any reloader’s needs for many www.sinclairintl.com/rebates for details. years. Ram diameter is 1", press top threads are 11/4"-12 with a machined 7/8"-14 insert, window opening is 41/4". Sale prices valid thru Jan. 12, 2015. #749-007-994SW RCBS Rock Chucker Supreme Reloading Press $149.99 $119.99

D. MEC 9000GN Shell Press MEC’s high-speed, high-volume 9000GN produces a loaded shell with each stroke of the handle! Simply put in a wad and shell casing, and the 9000GN ejects a loaded shell when you pull the handle. Ten different operations are performed at six stations each time you cycle the handle. The 9000GN is equipped with a fully automatic primer feed, auto-cycle charging, and MEC’s exclsive three-stage crimp. Resizes high- and low-base shells for opti- mum performance. Includes three powder bushings. CHARGE POWDER ITEM # DESCRIPTION BAR BUSHINGS F #749-010-697SW 9000GN – 12 Ga. 11/8 oz. 29, 30, 32 $549.99 #749-010-698SW 9000GN – 20 Ga. 7/8 oz. 20, 22, 24 549.99

Lee Precision E. Sinclair Arbor Press Universal Shellholder Set Our Arbor Press was designed specifically for use with hand dies, both in the field and on Fit most presses, including Lee, of course. 11 shell holders for popular your workbench. It does not need to be clamped down for use, and fits easily into your cartridges: #1 (.357 Mag/.38 Spec), #2 (.45 ACP/8x57 Mauser), #3 (.30- reloading box for trips to the range. Constructed with a solid stainless steel post and fea- 30), #4 (.222/.223/5.56 NATO), #5 (7mm Rem Mag/WSM/WSSM), turing a stainless steel rack and pinion design, this press functions flawlessly with all neck #7 (.32 ACP/.30 M1 Carb), #8 (.416 Rigby/.45-70), #9 (.41 Mag), sizing and bullet seating hand dies. Ratchet style height adjustment knob allows makes it #10 (.220 Swift), #11 (.44 Mag/.45 Colt), and #19 (.380 ACP/9mm easy to raise and lower the press head position. Sale prices valid thru Jan. 12, 2015. Luger/.40 S&W). This press is not intended for use with full length resizing dies. NEW #100-010-077SW Universal Shellholder Set $27.49 #749-007-637SW Sinclair Arbor Press $114.99 $99.99 Redding Competition Shellholders Five-piece set lets you adjust headspace by changing shellholder thickness: +.002", +.004", +.006", +.008", and +.010" thicker than F. Sinclair Custom Press normal shellholders (.125" from bottom case head cut to the top of the shellholder). Storage box has a slot for your regular shellholder. Our Sinclair Custom Press is designed for sizing and shoulder bumping benchrest cartridges anywhere - in the field or in the reloading room. It’s portable but solid: machined from solid Redding Competition Shellholder Set $46.99 billet aluminum, with all edges radiused to eliminate sharp corners. The large 1" ram has a snap-in shellholder slot, and spent primers exit through the bottom of the ram so they won’t ITEM # DESCRIPTION jam the heavy-duty linkage, which is free of exposed clips, nuts, or bolts. 10° press tilt for #749-005-614SW 220 Swift ITEM # DESCRIPTION aids in easy case insertion, and the 2.5" throat opening accepts cases up to .308 length for #749-005-623SW 222 and 223 Families #749-005-613SW 30-30 sizing, including PPCs, BRs, 30x47, etc. Optional mounting plate, sold separately, enables #749-005-620SW PPC’s #749-005-621SW Most Belted Mags quick takedown and compact storage. Sale prices valid thru Jan. 12, 2015. #749-005-489SW 6.5x55mm Swedish #749-012-664SW 338 Lapua Mag, 416 Rigby #749-008-332SW Sinclair Custom Press $299.99 $249.99 #749-005-630SW 243, 308, 30-06 #749-012-663SW 378 Wby Mag & 40, 45-70 #749-002-681SW Optional Mounting Plate 17.95 13 Reloading Components D

C E A B F

A. Remington Primers D. Berry’s Preferred F. Hornady Bullets 1 BOX OR 5 BOX OR Plated Pistol Bullets ITEM # WGT TYPE COUNT PRICE ITEM # DESCRIPTION MORE EA MORE EA 17 (.172") #749-011-305SW 61/2 Small Rifle $34.99 $32.99 ITEM # TYPE COUNT PRICE #749-011-306SW 71/2 Small Rifle 34.99 32.99 9mm (.356") #749-002-656SW 20 gr. V-Max 100/box $18.99 Benchrest #749-012-986SW 115 gr. RN 250/box $23.49 20 (.204") 1 #749-011-309SW 9 /2 Large Rifle 33.49 29.99 #749-012-987SW 124 gr. RN 250/box 24.49 #749-002-653SW 32 gr. V-Max 100/box 18.49 #749-011-308SW 91/2 Large Rifle Mag. 41.49 35.99 #749-009-714SW 32 gr. V-Max 250/box 40.99 1 #749-012-988SW 147 gr. RN 250/box 30.99 #749-011-296SW 1 /2 Small Pistol 34.99 32.99 #749-002-654SW 40 gr. V-Max 100/box 18.99 #749-011-303SW 51/2 Small Pistol Mag. 34.99 32.99 38 (.357") 1 #749-009-715SW 40 gr. V-Max 250/box 40.99 #749-011-298SW 2 /2 Large Pistol 34.99 32.99 #749-012-989SW 125 gr. FP 250/box 24.99 #305-000-001SW 209 Shotshell 49.99 42.99 22 (.224") #749-012-990SW 158 gr. RN 250/box 30.99 #749-002-659SW 40 gr. V-Max 100/box 18.99 B. CCI Primers 40/10mm (.401") #749-005-487SW 40 gr. V-Max 250/box 39.99 #749-012-991SW 180 gr. FP 250/box 34.99 #749-002-113SW 50 gr. SP 100/box 13.99 1 BOX OR 5 BOX OR 45 ACP (.452") #749-002-657SW 50 gr. V-Max 100/box 18.49 ITEM # DESCRIPTION MORE EA MORE EA #749-012-993SW 185 gr. HBRN 250/box 35.99 #749-013-738SW 200 Large Rifle $29.49 $27.49 #749-005-486SW 50 gr. V-Max 250/box 39.99 #749-006-091SW BR2 Large Rifle 52.99 49.99 #749-012-995SW 200 gr. SWC 250/box 35.99 #749-002-557SW 52 gr. BTHP (MCH) 100/box 17.99 #749-013-739SW 250 Large Rifle Mag. 33.99 31.49 #749-012-996SW 230 gr. RN 250/box 39.49 #749-012-744SW 53 gr. V-Max 100/box 17.99 #749-009-265SW 400 Small Rifle 32.99 30.99 #749-002-063SW 55 gr. SP 100/box 13.99 #749-006-109SW BR4 Small Rifle 54.99 49.99 #749-002-114SW 55 gr. SP 100/box 13.99 #749-004-946SW 450 Small Rifle Mag. 34.99 31.99 #749-013-231SW No. 41/5.56mm 41.99 37.99 #749-002-115SW 55 gr. FMJ-BT 100/box 14.49 #749-013-232SW No. 34/7.62mm 41.99 36.99 E. Nosler #749-002-658SW 55 gr. V-Max 100/box 18.99 #749-013-233SW No. 35/50 BMG 196.99 170.99 Custom Brass #749-005-485SW 55 gr. V-Max 250/box 39.99 #749-013-740SW 300 Large Pistol 29.99 26.49 ITEM # CARTRIDGE COUNT Price #749-009-718SW 55 gr. V-Max w/C 100/box 17.99 #749-013-741SW 350 Large Pistol Mag. 31.49 29.49 #100-658-001SW 222 Remington 100/box $79.99 #749-013-743SW 500 Small Pistol 29.49 27.49 6mm (.243") #749-004-145SW 223 Remington 50/box 32.99 #749-003-080SW 58 gr. V-Max 100/box 20.49 #749-013-744SW 550 Small Pistol Mag. 29.49 27.49 #100-658-003SW 223 Remington 100/box 59.99 #749-013-475SW 209 Shotshell 29.99 28.99 #749-005-436SW 243 Winchester 50/box 46.99 #749-003-265SW 75 gr. V-Max 100/box 22.99 #749-013-476SW 209M Magnum 29.99 28.99 #749-010-357SW 257 Weatherby 50/box 74.99 #749-003-077SW 100 gr. BTSP (IL) 100/box 20.99 Shotshell #749-010-416SW 260 Remington 50/box 61.99 #749-012-313SW 105 gr. BTHP 100/box 22.99 #749-006-327SW 264 Winchester Mag 50/box 74.99 25 (.257") LIMITED SUPPLIES #749-006-361SW 6.5-284 Norma 50/box 64.99 All primers sold in boxes of 1,000 #100-658-005SW 6.5x55 Swed Mauser 50/box 51.99 #749-003-546SW 117 gr. BTSP (IL) 100/box 24.49 REMEMBER: There is a UPS Hazardous charge per package #749-005-477SW 270 Winchester 50/box 53.99 270 (.277") for powder or primers, Ground $25, Air $35* (*Primers Only). #749-010-447SW 270 Weatherby 50/box 73.99 #749-009-725SW 110 gr. V-MAX 100/box 28.99 Powder and primers may be shipped together in the same #749-010-417SW 7mm-08 Remington 50/box 51.99 package. Powder, primers or ammunition may NOT be shipped 7mm (.284") #100-658-042SW 7x57 Mauser 50/box 81.99 #749-004-304SW 154 gr. SST 100/box 29.99 out of the United States. #749-005-478SW 280 Remington 50/box 51.99 #749-006-592SW 280 Ackley Improved 50/box 73.99 30 (.308") For full PRIMER and BRASS selection or to check #749-005-598SW 7mm STW 25/box 63.99 #749-004-023SW 150 gr. SST 100/box 29.99 availability visit Sinclairintl.com #749-010-448SW 7mm SA Ultra Mag 25/box 65.99 #749-003-266SW 150 gr. FMJ-BT 100/box 22.99 C. Hornady #749-005-490SW 30-06 Springfield 50/box 51.99 #749-004-306SW 165 gr. SST 100/box 29.99 Unprimed Brass #100-658-046SW 300 AAC Blackout 50/box 47.99 BTHP Natl #749-005-763SW 300 H&H 25/box 74.99 #749-004-010SW 168 gr. Match 100/box 28.99 1 BOX OR 5 BOX OR #749-658-001SW 300 Rem. SAUM 25/box 66.99 ITEM # CARTRIDGE COUNT MORE EA MORE EA #749-006-605SW 300 Weatherby Mag 50/box 73.99 #749-009-735SW 168 gr. BTHP 250/box 63.99 Rifle #749-005-484SW 308 Winchester 50/box 51.99 #749-004-351SW 168 gr. A-Max 100/box 29.99 #749-009-813SW 6.5 Grendel 50/box 35.49 33.49 #749-010-720SW 30-378 Weatherby 25/box 81.99 #749-004-395SW 180 gr. SST 100/box 29.99 #749-009-812SW 6.5 Creedmoor 50/box 34.49 32.49 #749-010-721SW 8x57 JS Mauser 50/box 73.99 338 (.338") #749-011-452SW 325 WSM 25/box 61.99 #749-009-815SW 6.8 SPC 50/box 35.49 33.49 #749-004-876SW 225 gr. SST 100/box 36.49 #749-009-773SW 270 Win 50/box 35.49 33.49 #749-011-687SW 338-06 A-Square 25/box 61.99 #100-010-319SW 300 Blackout 50/box 35.99 33.99 #749-011-716SW 338 Rem Ultra Mag 25/box 61.99 #749-005-158SW 250 gr. BTHP (MCH) 50/box 37.99 #749-009-781SW 308 Win Match™ 50/box 34.49 32.49 #749-011-775SW 338 Lapua 25/box 64.99 #749-012-338SW 285 gr. BTHP 50/box 36.99 #749-009-783SW 338 Lapua 20/box 46.99 43.99 #749-011-841SW 340 Weatherby 25/box 47.99 45 (.458") #749-009-818SW 9.3x74R 20/box 27.99 25.99 #749-011-849SW 35 Whelen 50/box 79.99 #749-002-651SW 300 gr. HP 50/box 21.99 #100-014-804SW NEW 50 BMG 20/box 102.99 #749-011-954SW 350 Rem Mag 25/box 47.99 Handgun #749-011-955SW 9.3x62 Mauser 25/box 47.99 50 (.510") #749-009-797SW 45 ACP 100/box 37.49 34.99 #100-658-008SW 375 H&H 25/box 61.99 #749-005-649SW 750 gr. A-MAX UHC 20/box 47.99 14 A. Sierra Bullets B. Berger Target Bullets C. Nosler Ballistic Tip ITEM # WGT TYPE COUNT PRICE ITEM # WGT TYPE COUNT PRICE 22 (.224") Bullets #749-002-503SW 40 gr. HP (VM) 100/box 15.99 22 (.224") ITEM # WGT TYPE COUNT PRICE #749-002-518SW 50 gr. SPT (VM) 100/box 16.49 #749-003-628SW 52 gr. Match Target 100/box $26.99 20 (.204") #749-003-136SW 50 gr. BlitzKing 100/box 22.99 #749-003-639SW 55 gr. Match Target 100/box 24.49 #749-003-084SW 32 gr. Spitzer 100/box $21.49 #749-002-950SW 52 gr. HPBT (MK) 100/box 19.49 6mm (.243") 22 (.224") #749-002-788SW 53 gr. HP (MK) 100/box 20.49 #749-013-737SW 63-65 gr.* BR Column 100/box 28.99 #749-003-126SW 40 gr. Spitzer 100/box 21.99 #749-002-521SW 55 gr. Blitz 100/box 16.49 #749-003-837SW 65 gr. Match Target BT 100/box 27.99 #749-003-125SW 50 gr. Spitzer 100/box 22.99 #749-002-642SW 55 gr. SBT (GK) 100/box 18.99 #749-009-358SW 65 gr. Match FBHP 100/box 27.99 #749-003-127SW 55 gr. Spitzer 100/box 22.99 #749-002-641SW 55 gr. HPBT (GK) 100/box 18.99 #749-005-332SW 105 gr. Match Target BT 100/box 39.99 #749-003-145SW 60 gr. Spitzer 100/box 22.49 #749-003-133SW 55 gr. BlitzKing 100/box 22.99 #749-004-422SW 105 gr. Match Target VLD 100/box 32.99 #749-005-640SW 50 gr. Spitzer 250/box 47.99 #749-002-564SW 63 gr. SMP (VM) 100/box 18.49 #749-004-417SW 108 gr. Match Target BT 100/box 33.99 #749-005-642SW 55 gr. Spitzer 250/box 47.99 #749-002-864SW 65 gr. SBT (GK) 100/box 19.49 6.5mm (.264") #749-005-711SW 60 gr. Spitzer 250/box 48.99 #749-003-117SW 69 gr. HPBT (MK) 100/box 22.49 #749-005-243SW 130 gr. Match Target VLD 100/box 41.99 25 (.257") 243/6mm (.243") #749-005-242SW 140 gr. Match Target VLD 100/box 43.99 #749-004-025SW 85 gr. Spitzer 100/box 28.99 #749-003-276SW 85 gr. HPBT (GK) 100/box 24.49 #749-005-246SW 140 gr. Match Target BT 100/box 43.99 6.5mm (.264") #749-003-087SW 100 gr. SPT (PH) 100/box 20.99 7mm (.284") #749-002-637SW 100 gr. Spitzer 50/box 18.79 #749-003-275SW 100 gr. SBT (GK) 100/box 23.99 #749-005-648SW 180 gr. Match Target VLD 100/box 47.99 #749-002-649SW 120 gr. Spitzer 50/box 18.99 #749-004-137SW 107 gr. HPBT (MK) 100/box 28.99 30 (.308") 270 (.277") 25 (.257") Match Hybrid #749-002-715SW 140 gr. Spitzer 50/box 20.49 #749-003-094SW 75 gr. HP (VM) 100/box 22.99 #749-013-140SW 155 gr. Target 100/box 46.99 #749-003-831SW 100 gr. HPBT (MK) 100/box 28.49 7mm (.284") Match Target BT #749-002-716SW 140 gr. Spitzer 50/box 19.99 6.5mm (.264") #749-005-575SW 155.5 gr. Fullbore 100/box 44.99 #749-003-579SW 85 gr. (VM) 100/box 25.49 #749-002-954SW 150 gr. Spitzer 50/box 20.49 #749-003-646SW 100 gr. HP (VM) 100/box 26.49 #749-005-757SW 175 gr. Match Target BT 100/box 48.99 30 (.308") 7mm/284 (.284") #749-005-714SW 175 gr. Match Target VLD 100/box 48.99 #749-002-702SW 125 gr. Spitzer 50/box 19.49 #749-003-271SW 100 gr. HP (VM) 100/box 23.49 Match Hybrid #749-002-984SW 165 gr. Spitzer 50/box 21.99 #100-008-982SW 185 gr. Target 100/box 48.99 30 (.308") #749-003-082SW 180 gr. Spitzer 50/box 21.99 #749-013-514SW 125 gr. HP (MK) 100/box 35.49 #749-005-704SW 185 gr. Match Target BT 100/box 49.99 #749-003-573SW 150 gr. SPT (PH) 100/box 25.49 #749-005-682SW 185 gr. Match Target VLD 100/box 48.99 #749-004-554SW 150 gr. HPBT (MK) 100/box 33.99 #749-005-717SW 210 gr. Match Target BT 100/box 51.49 Nosler Custom #749-004-553SW 155 gr. HPBT 100/box 33.99 Match Hybrid Competition Bullets HPBT #749-013-813SW 230 gr. 100/box 54.99 #749-004-661SW 155 gr. 100/box 35.49 Target ITEM # CAL. WGT TYPE PRICE (PALMA) 338 (.338") 100/box #749-004-127SW 165 gr. SBT (GK) 100/box 28.99 Match Hybrid #749-003-630SW 22 (.224") 77 gr. HPBT 24.99 #749-004-552SW 168 gr. HPBT (MK) 100/box 32.49 #749-013-814SW 300 gr. 100/box 75.99 Target #749-003-718SW 22 (.224") 80 gr. HPBT 25.49 #749-004-665SW 175 gr. HPBT (MK) 100/box 34.49 Match Hybrid #749-004-135SW 30 (.308") 168 gr. HPBT 30.49 #749-004-295SW 180 gr. SBT (GK) 100/box 30.49 #749-101-075SW 300 gr. 250/box 174.99 Target 250/box #749-004-962SW 180 gr. HPBT (MK) 100/box 39.49 * BR Column bullet weights vary from lot to lot due to variances in jacket thickness, #749-004-969SW 190 gr. HPBT (MK) 100/box 37.99 which determines core weight and balance. Actual finish weight is printed on each box. #749-005-823SW 22 (.224") 52 gr. HPBT 49.49 #749-005-444SW 220 gr. HPBT (MK) 100/box 44.99 #749-006-118SW 22 (.224") 69 gr. HPBT 51.99 338 (.338") Berger Bulk Packs: #749-006-369SW 22 (.224") 77 gr. HPBT 57.99 #749-004-454SW 250 gr. HPBT (MK) 50/box 33.49 500 and 1,000 Count Boxes #100-658-071SW 22 (.224") 77 gr. HPBT 60.99 375 (.375") ITEM # WGT TYPE COUNT PRICE #749-006-382SW 22 (.224") 80 gr. HPBT 59.99 #749-004-418SW 300 gr. SBT (GK) 50/box 31.99 20 (.204") #749-006-708SW 30 (.308") 155 gr. HPBT 69.99 45-70 (.458") #749-009-110SW 35 gr. Match Varmint 1,000/box $229.99 #749-006-911SW 30 (.308") 175 gr. HPBT 74.99 #749-003-548SW 300 gr. HP/FN (PH) 50/box 24.49 #749-009-111SW 40 gr. Match Varmint BT 1,000/box 229.99 1,000/box Sierra Pistol Bullets 22 (.224") #749-011-988SW 22 (.224") 52 gr. HPBT 160.99 ITEM # WGT TYPE COUNT PRICE #749-009-113SW 52 gr. Match Target 1,000/box 229.99 #749-011-989SW 22 (.224") 69 gr. HPBT 169.99 30 (.308") #749-009-112SW 52 gr. Match Varmint 1,000/box 229.99 #749-011-991SW 22 (.224") 77 gr. HPBT 169.99 #749-002-956SW 85 gr. RN 100/box $19.99 #749-009-115SW 70 gr. Match Target VLD 1,000/box 274.99 #749-011-994SW 30 (.308") 168 gr. HPBT 229.99 9mm (.355") #749-009-117SW 73 gr. Match Target BT 1,000/box 272.99 #749-011-995SW 45 (.451") 185 gr. JHP 169.99 #749-002-560SW 90 gr. JHP 100/box 16.99 #749-008-304SW 80 gr. Match Target VLD 1,000/box 272.99 #749-002-634SW 115 gr. JHP 100/box 18.49 6mm (.243") For full BULLET selection or to check availability visit Sinclairintl.com #749-002-957SW 125 gr. JHP 100/box 19.99 #749-013-750SW 63-65 gr.* BR Column 1,000/box 289.99 45 (.4515") #749-009-123SW 68 gr. Match Target 1,000/box 249.99 #749-003-644SW 230 gr. JHP 100/box 26.99 50 (.500") #749-009-124SW 90 gr. Match Target BT 1,000/box 319.99 #749-004-118SW 400 gr. JSP 50/box 30.99 #749-007-915SW 105 gr. Match Target VLD 500/box 152.99 A #749-007-919SW 108 gr. Match Target BT 500/box 159.99 B Sierra Long Range and 6.5mm (.264") Specialty Bullets #749-008-140SW 140 gr. Match Target VLD 500/box 199.99 C ITEM # WGT TYPE COUNT PRICE 30 (.308") 22 (.224") #749-009-120SW 115 gr. Match Target FB 500/box 199.99 #749-011-436SW 77 gr. HPBT (MK) 500/box 132.99 #749-009-121SW 155.5 gr. Match BT Fullbore 500/box 199.99 #749-007-663SW 80 gr. HPBT (MK) 500/box 121.99 #749-008-240SW 210 gr. Match Target VLD 500/box 229.99 338 (.338") * BR Column bullet weights vary from lot to lot due to variances in jacket thickness, which deter- #749-008-323SW 300 gr. HPBT (MK) 500/box 300.99 mines core weight and balance. Actual finish weight is printed on each box. 15 Reloading Products D A D. Lee Auto-Prime XR Priming Tool The Lee Auto-Prime XR hand-held priming tool handles all your favorite brands of primers. It features an elevator pin that separates the primer being seated from all others within the storage tray, reducing the chances of a chain fire. Just like the original Lee Auto-Prime, the Auto-Prime XR still has that good primer seating “feel” and is B an excellent tool for a beginning or high-volume E handloader. Comes with large and small primer trays with slide-on covers. The square trays easily accept all brands of primer boxes, and they let you easily flip your primers upright for the proper orientation. Uses Lee Auto-Prime shellholders (go to Sinclairintl.com). C #749-002-612SW Lee Auto Prime XR F Priming Tool $19.99

A. Lyman 1200 Pro Tumbler E. Sinclair/L.E. Wilson ITEM # CARTRIDGE #749-014-513SW 222 Rem Lyman’s 1200 Pro is a great tumbler at an entry-level price, with an added bonus: it comes with Micro-Adjust #749-014-501SW 223 Rem a built-in sifter lid for quick and easy media separation, so it saves you the cost of buying a Bullet Seater Die #749-014-514SW 22-250 separate sifter. Heavy-duty, thermally protected motor runs smooth and quiet. Holds 2 lbs. of Incorporating customers’ ideas and our own expe- Sale prices valid thru Jan. 12, 2015. #749-014-508SW 243 Win media and cleans up to 350 .38 Special cases per cycle. rience and made in the USA for Sinclair by L.E. #749-014-511SW 260 Rem #749-012-455SW Lyman 1200 Pro Tumbler, 115V $57.99 $49.99 Wilson, our detent-bearing driven seater dies #749-014-505SW 6mm PPC allow positive “click” increments of .0005" so you #749-014-503SW 6mm Dasher can make fast, accurate, repeatable seating depth #749-014-502SW 6mm BR adjustments with a simple turn of the die body. #749-014-504SW 6.5x47 Lapua Graduated adjustment scale laser-etched on the die #749-014-512SW 6.5x284 Norma B. RCBS Ultrasonic Case Cleaner body enables repeated use with different bullets RCBS Ultrasonic Case Cleaner is a powerful weapon in the fight against case tarnish and and seating depths. The seater stem is custom-fit- #749-014-509SW 30 BR carbon buildup. It has a big, 3.2 quart capacity stainless steel tank that holds a lot of brass ted to the seater body to ensure a close-tolerance #749-014-500SW 308 Win while the unit’s powerful 60-watt transducer drives 36kHz ultrasonic waves through the fit. Machined from 303 and 416 stainless steel, #749-014-510SW 30-06 Springfield cleaning solution warmed by the 100-watt ceramic heater. The user-friendly keypad and with all-stainless-steel springs and ball bearings #749-014-506SW 300 Win Mag display screen on the front of the housing lets you select 5 temperature settings and set the to ensure smooth, precise, click adjustments. #749-014-507SW 338 Lapua timer from 1 to 30 minutes for the best level of cleaning action to get your brass squeaky Sale prices valid thru Jan. 12, 2015. clean. Mix the concentrated Case Cleaning Solution (sold separately) with water to make up Micro-Adjust Bullet Seater $199.99 $169.99 to 10 gallons of brass cleaning solution for your Ultrasonic Cleaner. #100-200-211SW RCBS Ultrasonic Case Cleaner $141.99 REBATE #100-200-212SW RCBS Ultrasonic Case Cleaning Solution, See back cover or F. Sinclair Stainless Steel Decap Die www.sinclairintl.com/rebates 32 oz. 19.99 for details. Our exceptionally versatile stainless steel die ensures smooth, positive decapping of any cases from 22 caliber up to long cases like Ultramags, 338 Lapua, 378 Weatherby Magnum, 416 Rigby-and everything in between. You can use it on PPC and BR cases with .060" flash holes by simply inserting the included undersized decap pin. Comes with our crossbolt-style stainless steel Sinclair Lock Ring for ultra-stable mounting in any standard 7/8"-14 press, C. Markron Custom Bullet and Primer Sealer three decapping pins for standard .080" flash holes, and two pins for .060" flash holes. We Seals the primer-to-primer-pocket joint to produce a tough, waterproof barrier that keeps included the spare pins, so a broken pin won’t bring your reloading session to an unexpected moisture out of your bullet’s powder to help prevent misfires. Fast drying, easy to apply to halt. Sale prices valid thru Jan. 12, 2015. any loaded ammunition. Greatly extends the storage life of your cartridges, even under #749-011-516SW Sinclair Stainless Steel Decap Die, adverse, high-humidity conditions. Withstands up to 30 days of total water submersion. The w/.080" and .060" Pins $34.95 $29.99 1/2 oz. bottle contains enough sealer to treat approximately 1,000 rounds. #749-008-766SW Decap Rod for .17/.20 Cal. Cases 12.99 #749-008-886SW Standard .080" Decap Pins, 5-Pak 6.99 #105-000-110SW Markron Bullet and Primer Sealer $6.49 #749-008-885SW PPC/BR .060" Decap Pins, 5-Pak 3.99

RCBS Rock Chucker Supreme Master Reloading Kit Complete kit comes with nearly everything needed to start loading your own pistol or rifle ammunition right out of the box. Just sup- ply the shell holder and die set for the cartridge you want to load, plus bullets, primers, cases, and powder (of course!). RCBS’s classic, cast iron Rock Chucker Supreme Press features a large opening that lets you turn out finished ammunition up to 3.750" long - every- thing from .17 Hornet to .416 Rigby. Kit includes an array of high-quality RCBS gear: hand-held priming tool, Uniflow powder measure with bench-mount bracket, 5-0-5 powder/bullet beam scale, powder funnel, case lube kit, case mouth deburring tool, universal loading block, accessory handle, and the latest-edition of the Speer Reloading Manual. Sale prices valid thru Jan. 12. #100-009-441SW Rock Chucker Supreme Master Reloading Kit $329.99 $279.99

See back cover or REBATE www.sinclairintl.com/rebates for details. 16 Redding Competition Neck Die Set ITEM # CARTRIDGE PRICE Redding’s premium die set includes Category I ITEM # CARTRIDGE PRICE a Competition Bushing Neck Sizing #749-008-231SW 204 Ruger $224.99 Category II Die, a Body Die, and a Competition #749-008-212SW 222 Remington 224.99 #749-008-278SW 221 Fireball 259.99 Bullet Seater. Packaged in the clas- #749-008-235SW 223 Remington 224.99 #749-008-297SW 223 Remington Imp 40° 259.99 sic “Redding Green” die box #749-008-226SW 22-250 Remington 224.99 #749-008-289SW 22 PPC USA 259.99 with a wrench. Bushings 220 Swift 22 BR Remington sold separately at sinclair- #749-008-211SW 224.99 #749-008-288SW 259.99 intl.com or speak with one #749-008-223SW 6mm PPC USA 224.99 #749-008-290SW 22-250 Rem. Imp 40° 259.99 of our Reloading Techs at #749-008-232SW 6mm BR Rem. (Norma BR) 224.99 #749-008-287SW 223 WSSM 259.99 800-717-8211. #749-008-227SW 243 Winchester 224.99 #749-008-285SW 243 WSSM 259.99 #749-008-213SW 6mm Remington 224.99 #749-008-292SW 243 Win. Imp 40° 259.99 ITEM # CARTRIDGE PRICE #749-008-214SW 25-06 Remington 224.99 #749-008-293SW 6mm Rem. Imp 40° 259.99 Category III #749-008-224SW 260 Remington 224.99 #749-008-291SW 6mm/284 Win. 259.99 #749-008-353SW 20 Tactical 319.99 #749-008-228SW 6.5x55 Swedish 224.99 #749-008-283SW 25 WSSM 259.99 #749-008-352SW 6mm/22-250 319.99 #749-008-215SW 270 Winchester 224.99 #749-008-299SW 6.5mm/284 Winchester 259.99 #749-008-343SW 250 Savage 319.99 #749-008-217SW 7mm-08 Remington 224.99 #749-008-281SW 270 WSM 259.99 #749-008-344SW 257 Roberts 319.99 #749-008-218SW 280 Remington 224.99 #749-008-282SW 6.8mm Rem. SPC 259.99 #749-008-349SW 257 Roberts Imp 40° 319.99 #749-008-216SW 7mm Rem. Mag. 224.99 #749-008-280SW 7mm BR Remington 259.99 #749-008-351SW 25-06 Rem. Imp 40° 319.99 #749-008-237SW 308 Winchester 224.99 #749-008-294SW 280 Rem. Imp 40° 259.99 #749-008-347SW 257 Wthby. Mag. 319.99 #749-008-219SW 30-06 Springfield 224.99 #749-008-286SW 7 Rem. SA UM 259.99 #749-010-780SW 260 Remington Imp. 319.99 #749-008-221SW 300 Rem. SA UM 224.99 #749-008-284SW 7mm WSM 259.99 #749-008-345SW 264 Win. Mag. 319.99 #749-008-229SW 300 Win. Mag. 224.99 #749-008-295SW 7mm STW 259.99 #749-008-348SW 7mm TCU 319.99 #749-010-779SW 300 Wthby Mag. 224.99 #749-008-298SW 7mm Rem. Ultra Mag. 259.99 #749-008-346SW 284 Winchester 319.99 #749-008-222SW 300 Rem. Ult. Mag. 224.99 #749-008-279SW 338 Winchester Mag. 259.99 #749-008-350SW 30/338 Win. Mag. 319.99 #749-008-220SW 300 WSM 224.99 #749-008-296SW 338 Rem. Ultra Mag. 259.99 #749-008-356SW 338 Lapua Mag. 319.99

A. Sinclair Heavy Duty D. RCBS AR-Series Dies Poly Loading Blocks RCBS developed the AR-Series dies specifically to meet the unique needs of folks loading These 50-round blocks are machined from solid white polyethylene providing the reloader for AR-15 type rifles on progressive presses. These two-die sets have a sizing die and seater with a very durable, easy to clean loading block. Each block is machined to fit the specific die, both optimized for the types of cartridges used in the AR platform and other semi-au- cases you reload. 1" thick to provide deeper holes for your cases to sit in. Each hole has a to rifles. The “Small Base” sizing die resizes the case to minimum dimensions to help slight chamfer for easy case head entry. ensure reliable chamber- AR-SERIES SEATER ing. RCBS’ Taper Crimp HVY-DUTY BLOCKS DIE SET DIE Seater gives a secure, CARTRIDGES $12.79 CARTRIDGE $44.99 $33.49 recoil-resistant crimp 17 Rem, 204 Ruger, 222 Rem, 223, 222 Mag, 221 FB, 7 TCU, and 204 Ruger #100-200-221SW #100-200-235SW while still being tolerant #749-001-878SW of small variations in 30-M1 Carbine 223 Remington/5.56x45mm #100-200-222SW #100-200-236SW 22/6 PPC, 38 Spcl, 357 Mag, 7.62x39, 224 Wthby and 6.5 Grendel #749-001-877SW SALE $34.99 case length when cases Cases with 308 Win and 30-06 Head Diameters, 22-250, 220 6x45mm #100-200-223SW #100-200-237SW are not trimmed. Helps Swift, 6/250, 243 Win, 6mm Rem, 240 Wthby, BR family, 25-06, 243 Winchester #100-200-224SW #100-200-238SW prevent deformation of #749-001-885SW the case neck or bulges 260 Rem, 6.5X55, 270 Win, 7x57, 250/300 Savage, 280 Rem, 6.5mm Creedmoor #100-200-226SW #100-200-240SW at the crimp when used 35 Whelen, 35 Rem 260 Remington #100-200-227SW #100-200-241SW with cannelured bullets. 22/284, 6/284, 6.5/284, 30-30 Win, 303 British, 38-40, 38-55, 264 LBC-AR #100-200-225SW #100-200-239SW Standard 7/8"-14 threads. 444 Marlin, 41 Mag, 44 Spcl, 44 Mag, 45 Colt, and 454 Casull #749-001-872SW 6.8mm Remington SPC #100-200-228SW #100-200-242SW Sale prices valid thru Popular Belted Magnums Except 378 and 460 Wthby, Also, 300 AAC Blackout (BLK) #100-200-220SW #100-200-234SW Jan. 12, 2015. 30-40 Krag, 44-40, and 45 Auto-Rim. #749-001-875SW 30 Remington AR #100-200-231SW #100-200-245SW WSM cases, WSSM cases, Rem Ultra Mags, 308 Winchester #100-200-230SW #100-200-244SW #749-001-874SW 7.62x39mm #100-200-229SW #100-200-243SW REBATE Rem Short Action Ultra Mags, 404 Jeffery 30-06 #100-200-232SW #100-200-246SW 338 Lapua Mag, 348 Win, 378 Wthby, 40-65, 416 Rigby, 45-70, See back cover or #749-001-873SW 338 Federal #100-200-233SW #100-200-247SW www.sinclairintl.com/rebates 460 Wthby for details. 50-70, 50 Sharps (32-hole block) #749-001-844SW

A B. Hornady “One Shot” Spray Lube We’ve tried all the aerosol case lubes out there. Most are tacky, messy, and lead to more B problems than they’re worth. That’s not the case with Hornady One Shot lube. Lube entire blocks of cases in “one shot”. Just spray it on and it dries in minutes. After sizing, just wipe clean and finish loading. This is one of our most popular sizing lubricants. Sale prices valid thru Jan. 12. Aerosol products must be shipped by UPS Ground only and cannot be shipped out of the U.S. #100-203-185SW Hornady “One Shot” Spray Lube $9.99 $8.99 C

C. Redding Stuck Case Removal Kit The quick, clean way to get a stuck case out of the sizing die. Kit has the correct size drill bit, a tap, a bolt, spacer block, and a wrench. After drilling the hole and tapping it, the rest is simple leverage with the bolt, spacer block, and wrench. Instructions included. D #749-003-050SW Redding Stuck Case Removal Kit $21.99 17 C leaning & Gunsmithing

A C. Dewey Bolt Action Cleaning Kit Female threaded Dewey rod with an all-cotton mop that rids your chamber of leftover solvents. Includes a lug recess cleaning head that attaches to the handle and accepts lug cleaning felts and cotton rolls (included). Kit also includes a double-ended, nylon gun/parts cleaning brush. #234-000-039SW NEW Bolt-Action Cleaning Kit $28.99 #234-000-049SW NEW Cotton Cleaning Rolls, 50-pak 2.95 #234-000-050SW NEW Lug Felt Refill, 10-pak 8.99

B D. Shooter’s Choice Universal Gun Care Pack This convenient package contains all the chemicals you need to clean and maintain your rifles, handguns and shotguns. Shooter’s Choice Bore Cleaner dissolves copper and lead fouling, as well as shotgun wad residue, and removes rust and corrosion. FP-10 Lubricant, the same formula currently used by U.S. Special Forces, reduces friction and wear, and C withstands temperatures up to 500° F. Rust Prevent Corrosion Inhibiter displaces water and creates an ultra-thin film on the metal that protects against rust, fingerprints and body D acids, pitting, and salt air. Sale prices valid thru Jan. 12. #100-010-562SW Universal Gun Care Pack $18.99 $17.99

E. Ransom Master Mat Such a high coefficient of friction that it actually feels sticky! Parts and pieces can’t roll and the molded-in trays and raised rims keep things separated. Roll it up, the flexible rubberized plastic won’t take a set. Resists most solvents. We tried everything from TCE to Shooter’s Choice to Hoppes - none fazed it. Light gray color makes parts stand out. Cleans up easily. 191/4" (48.8cm) x 113/4" (29.8cm). #164-800-000SW NEW Master Mat $39.99

E Dewey Coated Cleaning Rods The tough nylon coating on these rods absolutely won’t scratch the delicate rifling of the finest match barrel and won’t peel off like many vinyl coatings do. Smooth turning, ball bearing handle. Supplied with Adapter for standard 8-32 A. Lyman Turbo Sonic Power male thread brushes and accessories. Plus, an extra-long Dewey Jag that takes a patch either wrapped-around, or over-the-end, and fits directly onto the rod’s Professional Ultrasonic Cleaner male thread. .17 and .20 caliber rods do not include 8-32 adapter. .17 cal. has With its huge, 343/4" long heated tank, the Turbo Sonic Power Pro is designed for high-vol- 5-40 female threads. For .22 LR use .20. .22 fits .22-.26 centerfire. .30 fits .27 cal. ume cleaning jobs and larger-than-normal items. It will easily accommodate entire barreled and up. .35 fits .35 cal. and up. rifle actions, complete AR-15 upper and lower receivers, and a whole lot of handguns #234-000-028SW NEW Dewey .17 Cal. Cleaning Rod, 7" Long $27.99 at once. Then Turbo Sonic Power Pro’s 10 powerful industrial transducers go to work #234-217-011SW NEW Dewey .17 Cal. Cleaning Rod, 11" Long 26.99 aggressively deep-cleaning items inside and out. The cleaning action with Lyman’s Turbo #234-217-018SW NEW Dewey .17 Cal. Cleaning Rod, 18" Long 28.99 Sonic Steel Cleaner leaves parts so thoroughly degreased, Lyman recommends immediately #234-217-026SW NEW Dewey .17 Cal. Cleaning Rod, 26" Long 30.99 applying Turbo Sonic Gun Lube to protect them from corrosion. Built in drain makes it NEW easy to switch from one solution to the other. Includes timer and adjustable heat control #234-217-036SW Dewey .17 Cal. Cleaning Rod, 36" Long 31.99 (up to 175° F.). Costs hundreds – even thousands – less than other industrial cleaners, so it’s #234-000-062SW NEW Dewey .20 Cal. Cleaning Rod, 25" Long 36.49 ideal for gunsmiths, armorers, and even shooters who love to shoot but hate gun cleaning. #234-000-063SW NEW Dewey .20 Cal. Cleaning Rod, 32" Long 36.49 #234-000-064SW NEW Dewey .20 Cal. Cleaning Rod, 38" Long 37.49 #100-011-587SW NEW Power Professional Ultrasonic Cleaner $1182.99 #234-000-065SW NEW Dewey .20 Cal. Cleaning Rod, 42" Long 37.49 #100-011-588SW NEW Turbo Sonic Power Steel Cleaner – 1 Gallon 49.99 #234-222-012SW NEW Dewey .22 Cal. Cleaning Rod, 12" Long 28.24 #100-011-589SW NEW Turbo Sonic Gun Lube – 1 Gallon 56.99 #234-222-017SW NEW Dewey .22 Cal. Cleaning Rod, 17" Long 29.99 #234-222-024SW NEW Dewey .22 Cal. Cleaning Rod, 24" Long 29.49 #234-222-036SW NEW Dewey .22 Cal. Cleaning Rod, 36" Long 34.49 #234-000-047SW NEW Dewey .22 Cal. Cleaning Rod, 40" Long 32.99 #234-222-044SW NEW Dewey .22 Cal. Cleaning Rod, 44" Long 32.99 #234-230-017SW NEW Dewey .30 Cal. Cleaning Rod, 17" Long 29.99 B. Hoppe’s No. 9 Bore Solvent #234-230-024SW NEW Dewey .30 Cal. Cleaning Rod, 24" Long 29.99 THE world-famous bore solvent! Hoppe’s #9 cleaning solvent is formulated to remove pow- #234-230-036SW NEW Dewey .30 Cal. Cleaning Rod, 36" Long 32.49 der, lead, and copper fouling. Generations of shooters have sworn by it. #234-000-048SW NEW Dewey .30 Cal. Cleaning Rod, 40" Long 32.49 #699-000-005SW 4 oz. Hoppe’s No. 9 $5.99 #234-230-044SW NEW Dewey .30 Cal. Cleaning Rod, 44" Long 32.49 #699-902-016SW Pt. Hoppe’s No. 9 12.99 #234-035-001SW NEW Dewey .35 Cal. Cleaning Rod, 36" Long 34.49 #699-902-032SW Qt. Hoppe’s No. 9 16.99 #234-035-002SW NEW Dewey .35 Cal. Cleaning Rod, 44" Long 34.49 18 A. Surgeon Rifles Action Wrench Easy-to-use alternative to old-fashioned T-handle action wrenches is specifically designed to prevent damage to receiver when installing and removing barrels. Lets you torque a Remington 700 or Surgeon Rifles action as close as possible to the barrel threads to elim- inate unwanted twisting or bowing of the action that can result in distorted bolt raceways and other expensive damage. Inserts in the ejection port; the two “ears” fit in the raceways at the front ring. Insert a 1/2" drive ratchet handle or torque wrench and tighten/loosen the A B action to the barrel. Works on any length action. #100-003-675SW NEW Surgeon Action Wrench $79.99

B. Kleinendorst Rem 700 Barrel Tool A precisely milled slot in the front of the tool holds the lug in proper alignment as you tighten the barrel into the receiver. C #488-004-700SW NEW Factory/Shilen 700 Barrel Lug Tool $32.50 D #488-004-701SW NEW Tubb 700 Barrel Lug Tool 40.99 #488-000-002SW NEW Holland 700 Barrel Lug Tool 40.99

C. Sinclair Firing Pin Removal Tool E Makes the disassembly of your Remington-style bolt a piece of cake. It protects the shroud and cocking piece, controls the firing pin spring energy, and allows you to easily remove the firing pin assembly from the bolt body for cleaning and/or replacement. Fits the Remington 700, 40X, 600, 660, Model 7, XP-100, XR-100, and 722 actions, plus the Kelbly Stolle actions. Does not work for the 770 or the 40X rimfire action. #749-004-116SW NEW Firing Pin Removal Tool $29.99

Viper Chambering & Truing Fixture This handy three-in-one fixture helps you chamber rifle or pistol barrels, including con- toured barrels, regardless of length, from the chuck side of your lathe. Also use it to true up any bolt or bolt face, and to true up Remington actions. Fits a four-jaw independent F chuck; may be modified for use in three- or six-jaw chuck. Machined aluminum tube with hardened steel setscrews that are brass tipped to prevent marring the work piece. Built-in safety feature prevents setscrews from sticking out beyond the fixture and catching on your clothes. 7" long, 4" O.D., with a 1½" dia. through hole. F. Jerry Fisher Precision Barrel Vise NEW #100-015-759SW Chambering & Truing Fixture $265.99 The same vise used by master gunmaker Jerry Fisher for more than 40 years! This steel vise delivers rock-solid clamping force to keep barrels from slipping during installation and removal. Four bolts, washers, and hex nuts join the upper and lower bodies. As the nuts are loosened, the top jaw lifts and holds open via a spring system, which provides ample clear- ® ance and a third hand when loading and unloading, plus helps prevent scratching highly E. Brownells Acraglas Gel finished or engraved surfaces. Comes with one set of aluminum 1.250" split barrel bush- 5 ACRAGLAS GEL offers all the benefits of original ACRAGLAS®, plus a butter-smooth ings. Additional bushings sold separately, including an unsplit, 2" long blank with a /8" consistancy that makes it stay where you put it and keeps it from running, eliminating bore for custom sizing. Two recessed holes are cut into the vise base for bench mounting. the need to build elaborate modeling clay dams! 1-to-1 mixing ratio that greatly simplifies #310-000-003SW NEW Fisher Barrel Vise $574.99 the measuring and mixing process; excellent “thin strength”, shock resistance and stability. #310-000-004SW NEW 1.150" Barrel Bushing 54.99 ACRAGLAS GEL won’t crack, craze or sugar-out under recoil. Shrinks less than 1/10th of #310-000-005SW NEW 1.175" Barrel Bushing 54.99 one percent, which means your bedding will stay tight. Kit contains resin, hardener, release #310-000-006SW NEW 1.200" Barrel Bushing 54.99 agent, measuring/mixing supplies, black and brown dye, and complete instructions. #310-000-007SW NEW 1.225" Barrel Bushing 54.99 #081-014-004SW NEW ACRAGLAS GEL 4 oz. Kit $29.99 #310-000-008SW NEW 1.250" Barrel Bushing 54.99 #081-014-007SW NEW ACRAGLAS GEL 4 oz. Kit, Non-Flammable 34.95 #310-000-009SW NEW Barrel Bushing Blank 54.99

Hornady Lock-N-Load™ OAL Gauge The Hornady Lock-N-Load OAL Gauge measures the overall length for a particular bullet. It lets you periodically check the throat erosion of a rifle barrel, and it’s great for checking out used rifles. Using a specially modified cartridge case (sold separately – 60+ different cases available, see sinclairintl.com) to hold the bullet, insert the tool into the chamber of the rifle, push the bullet up against the rifling, and lock the setting so the tool can be removed from the rifle. Then measure across the base of the cartridge and the top of the bullet with your dial calipers (use of a bullet comparator at this time is highly recommended – sold separately) to obtain the OAL. If you want to check another type of bullet, insert the new bullet into the tool and repeat the steps. Two models are available, one for bolt-action and single shot rifles, and a curved model for autoloaders and most lever actions (except Winchester ’94). Both use the same modified cases, and both will work on AR-15 type rifles. #829-200-000SW Hornady Lock-N-Load OAL Gauge w/o Case $35.99 #829-200-001SW Hornady Lock-N-Load OAL Gauge for Semi-Auto w/o Case (Curved Model) 41.99

For full MODIFIED CASE selection visit Sinclairintl.com

19 Rifle Parts

Geissele Automatics E. Timney Triggers AR-15/AR-308 AR-15 Triggers Drop-In Trigger Module Geissele triggers give your AR a fully adjustable trigger with a smooth, consistent pull, a Timney’s AR-15 trigger module comes ready to install in any small-pin receiver and deliv- precise “icicle sharp” break, and ultra-fast lock time that minimizes accuracy loss caused ers a smooth, crisp, creep-free single-stage trigger pull. 100% drop-in—no gunsmithing, by gun movement during trigger pull. Fits semi-automatic AR-15/M16 rifles with .154" fitting, or adjusting required—with precision-machined tool steel components captive in hammer and trigger pin holes. May be installed on AR-Style .308 rifles that accept AR-15 the lightweight, aluminum housing. AR-15 model is available with a fixed, factory-set 3-, triggers. Includes trigger and hammer assemblies, springs, hammer pin and instructions. 4-, or 4.5-lb. pull weight and either a standard solid trigger shoe, or a distinctivelooking, lighter-weight skeletonized shoe. (Will not fit Colt-manufactured AR-15s with sear block.) A. Rapid Fire Trigger (B-GRF) gives semi-auto only rifles a glass- AR-308 model is for AR-style .308 rifles that accept small-pin AR-15 trigger components; smooth trigger pull very similar to the Geissele Super Select Fire trigger designed for fixed 4 lb. pull weight, solid shoe, and more hammer mass for positive ignition of harder full-auto weapons in the U.S. Special Operations Community. It pulls like a single-stage, but .308/7.62mm primers. All fit receivers with nominal .154" dia. trigger/hammer pin holes. resets like a two-stage. Includes two trigger springs, so it can be set up with a pull of either 4 lbs. or 3.2 lbs. Does NOT convert semi-auto rifles to fully automatic. #883-000-024SW AR-15 Trigger Module, Solid Shoe/3 lb. $223.99 Sale prices valid thru Jan. 12. #883-000-041SW AR-15 Trigger Module, Solid Shoe/4 lb. 223.99 #100-014-357SW NEW B-GRF Rapid Fire Trigger $190.00 $176.99 #883-000-042SW AR-15 Trigger Module, Solid Shoe/4.5 lb. 223.99 #883-000-026SW AR-15 Trigger Module, Skeleton Shoe/3 lb. 269.99 B. Two-Stage Enhanced Trigger (B-G2S-E) gives a smooth, light first- #883-000-036SW AR-15 Trigger Module, Skeleton Shoe 4 lb. 269.99 stage take up of 2.3 lbs. and a crisp second-stage break of 1.2 lbs. It’s ideal for use in Squad #883-000-037SW AR-15 Trigger Module, Skeleton Shoe/4.5 lb. 269.99 Designated Marksman rifles and similar applications, where both accuracy and reliability #883-000-023SW AR-308 Trigger Module, Solid Shoe/4 lb. 244.99 are critical. Sale prices valid thru Jan. 12. #100-014-358SW NEW 2-Stage G-G2S-E Trigger $185.00 $172.99 F. Timney Remington 700 Triggers Fully adjustable replacements for factory trigger gives Remington 700 rifles a clean, crisp C. Geissele Automatics SSA break so you can concentrate on making the shot, not hauling on a heavy factory trigger. Self-contained module - just remove the factory trigger and install the Timney unit. AR-15 Trigger Adjustable for pull weight, creep and backlash. Lock nuts hold settings. 3/8" wide curved trig- Two-stage combat trigger has a fixed 41/2 lb. total pull weight and non-adjustable sear ger shoe provides excellent control, grooved surface improves feel. Safety blocks the trigger, engagement. First-stage pull builds gradually to 21/2 lbs., with a 2 lb. second stage that not the sear, virtually eliminating the risk of accidental sear release when you take it off safe. breaks clean. Lightweight hammer driven by a full-power hammer spring speeds locktime 1 2 and delivers positive ignition. A secondary "safety sear" captures the hammer if the primary 510 - Offers a 1 / to 4 lb. pull weight range. sear accidentally releases due to hard impact. Direct replacement for factory trigger; may be 520-CE Calvin Elite - Extra-precise pull weight can be set as low as 8 oz. up to 21/2 installed without removing the safety. All springs are captive to simplify field disassembly lb. Wear components made from hardened A2 tool steel with Teflon-nickel coatings for for cleaning. Hammer and trigger pins fit .154" (small pin) receiver holes. May be installed smoothness. Gold-anodized housing. Named after Timney trigger designer Calvin Motley. in AR-style .308 rifles that accept AR-15 triggers. #100-003-620SW NEW .154" SSA Trigger $210.00 #883-000-005SW 510 Trigger, Blued Shoe $130.99 #883-000-054SW NEW 520-CE “Calvin Elite” Trigger, Blued Shoe 209.99 #883-000-055SW NEW 520-CE16 “Calvin Elite” Trigger, Nickel-Plate Shoe 219.99 D. CMC AR-15 Tactical Trigger Group Designed by renowned competition shooter Chip McCormick, the CMC trigger gives all the G. DPMS AR-15 advantages of a match-grade, single-stage trigger in a fully assembled, self-contained, drop- Lower Receiver Parts Kit in module that replaces the entire factory trigger/hammer group. You get a super-smooth, 1 Easiest way to complete a stripped lower receiver or rebuild a battle-weary one! Kit pre-set 3 /2 lb. pull with a consistent, clean break. Everything is held in perfect alignment includes all the internal small parts: mil-spec trigger, hammer, A2 pistol grip, trigger in the steel housing for easy installation. Precision-ground sear/hammer engagement sur- spring, trigger pin, hammer spring, hammer pin, disconnector and spring, bolt catch, bolt faces provide the remarkably crisp release. Tweaked at the factory to minimize take-up and catch plunger, bolt catch spring, bolt catch roll pin, selector, selector detent, selector detent over-travel. Available with a curved trigger shoe, or skeletonized flat shoe that provides a spring, two takedown detents and springs, pivot pin, rear takedown pin, buffer retainer different feel some shooters prefer. Fits AR-15 with .154" diameter trigger and hammer pins. and spring, magazine catch, button and spring, screw and washer, triggerguard assembly #207-000-017SW Tactical Trigger Group, Curved Shoe $189.99 and pin. Sale prices valid thru Jan. 12. #207-000-018SW Tactical Trigger Group, Flat Shoe 189.99 #231-115-003SW NEW LRPK-1 Complete Lower Parts Kit $59.99 $49.99

G A D B

C

E F

20 B

G E

C A F D

A. Magpul® PRS™ AR-15/M16 E. Defiance Machine Complete Precision Rifle Stock Bolt Action Receivers The Magpul Generation II Precision Rifle/Sniper buttstock is a drop-in, fully adjustable Machined 416 stainless steel actions accept most Remington 700 parts, stocks, barrels and precision stock assembly for standard A1/A2 fixed buffer rifles. The stock assembly mounts accessories, and help you build a custom bolt-action rifle. Manufactured to very precise to the rifle receiver extention tube, accepts standard buffer and spring and adjusts lengthof- tolerances, these actions feature one-piece 4340 bolts, M16-style extractors and Wire EDM- pull and comb height with two machined aluminum click-detent adjustment wheels. cut full-length lug ways for smooth operation and superior strength and rigidty. Accepts Ribbed rubber buttpad is correctly shaped for less fatigue and no slip during extended detachable magazines or BDL-style magazines; .338 Magnum Long Action takes detachable shooting sessions and wearing complete operational gear. Fully raised comb will not inter- mags only. Short Action has .480" bolt face. Long Magnum Action has .545" bolt face. .338 1 fere with charging handle operation. Two 1 /4" sling attachments (front and rear) which can Magnum Long Action has .595" bolt face. be mounted right side or left side are included. Total length-of-pull adjusts from 131/4" to 1 Stryker Ridge has standard Remington 700 profile and is drilled and tapped for mounts 14 /2", comb height adjusts a total of 1" weight of the assembly is 1 lb. 12 oz. Cover on the bottom of the unit slides off to reveal a Picatinny rail for accessory mounting. and bases that use 8-40 screws. Deviant model adds an integral 20 MOA Picatinny rail, a threaded bolt handle that lets you change knobs, and custom spiral fluting on the bolt. FFL #100-002-457SW NEW AR-15/M16 PRS Stock, Black $242.25 required for purchase. #100-012-650SW NEW Deviant SA Rec’r $1460.00 #100-012-651SW NEW Deviant .338 Magnum LA Rec’r 1620.00 #100-012-647SW NEW Stryker Ridge SA Rec’r 1099.00 B. Brownells #100-012-648SW NEW Stryker Ridge Magnum LA Rec’r 1099.00 Bolt/Carrier Group #100-012-649SW NEW Stryker Ridge .338 Magnum LA Rec’r 1099.00 Fully-assembled mil-spec bolt-and-carrier group drops into an AR-15 or M16 and gives superb reliability. Bolt is shot peened and heat-treated for extra strength and hardness, then magnetic particle inspected and high-pressure tested. Bolt carrier body is machined from F. Brownells 5-/10-Rd 8620 hardened steel and chrome lined; has the extended shroud to trip auto sear on full-au- AR-15 Magazines to rifles. Installed extractor includes black rubber insert with spring, and gas key screws are correctly torqued and staked. Matte black phosphate finish stands up to surface wear. Designed for compliance where state or local law requires reduced capacity, these magazines Sale prices valid thru Jan. 12. are built to the same exacting standards as our 20- and 30-round AR mags. The body has been shortened and redesigned to allow for only a 5- or 10-round count. Waffle-textured #078-000-175SW NEW AR-15/M16 Bolt & Carrier Group $139.99 Sale $124.99 Extracting ExtensionTM on the lower portion provides a positive grasping surface for remov- al from the mag well. Because the extension is a physically separate component, these mags cannot be altered to increase round count. Sale prices valid thru Jan. 12. #078-000-173SW NEW 5-Rd AR-15 Magazine $16.99 $11.99 C. Battle Arms Development #078-000-174SW NEW 10-Rd AR-15 Magazine 16.99 $11.99 Ambi AR-15/M16 Safety Selector Steel safety selector puts oversized levers on both sides of the receiver for easy ambidextrous operation. Large surface area lets you operate the safety while wearing gloves and eliminates fumbling. Pads are deeply grooved for an ultra-secure grip under stress or when hand is wet. G. Magpul Pmag® 30 Gen M3 Can be customized by positioning the larger pad on either side of the receiver. Works in any Latest generation of the polymer magazine that revolutionized magazine technology for mil-spec AR-15 receiver. Mounting hardware included. the AR-15/M16/M4 platform further expands the strength, reliability, and versatility of #100-005-841SW NEW Standard Ambi Safety Selector, Black $57.00 the original PMAG. The GEN M3 is molded from a polymer formula that delivers even more crush- and impact-resistance, with extra reinforcement in the mag catch and feed lip areas. Redesigned four-way anti-tilt follower ensures even smoother feeding, even when contaminated by dust or grit. Pop-off dust cover minimizes debris intrusion and prevents damage during storage. Removable floorplate is slim for easy side-by-side carry in tight mag D. Precision Armament pouches. 5.56mm/.223 ammunition only. PMAG 30 - available with solid sides or a clear polymer window on each side for at-a-glance load status checks. PMAG 40 has solid sides. Severe-Duty Muzzle Brake PMAG 20 - curved body helps ensure reliable feeding makes for a shorter mag that’s easier Heavy-duty AR-308 muzzle brake machined from solid stainless steel billet has large inter- to handle. PMAG 10 is perfect for hunting and other applications where the lowest possible nal baffles for maximum recoil management, so you can get the sights back on the target magazine profile is desired. quickly. Threads and bore aperture are machined in a single operation to ensure perfect #100-011-220SW NEW PMAG 30 GEN M3, Each $14.20 alignment. M11 is optimized for tactical situations requiring minimal dust signature. M41 #100-012-634SW NEW PMAG 30 Gen M3, 10-Pak 135.00 is designed for long-range precision tactical or target rifles. Angled ports vent gases count- #100-011-219SW NEW PMAG 30 GEN M3 Window, Each 17.05 er-clockwise to counteract recoil produced by heavy bullets and fast twist rates. . #100-015-262SW NEW PMAG 30 GEN M3 Window, 10-Pak 164.99 #100-010-538SW NEW.308 M11 Muzzle Brake, Black $119.99 #100-012-633SW NEW PMAG 40 GEN M3, Each 18.95 #100-011-352SW NEW.308 M11 Muzzle Brake, Silver 109.99 #100-012-635SW NEW PMAG 40 Gen M3, 10-Pak 181.00 #100-010-539SW NEW.308 M41 Muzzle Brake, Blk 119.99 #100-011-413SW NEW PMAG 20 GEN M3, Each 13.25 #100-011-977SW NEW.308 M41 Muzzle Brake, Silver 109.99 #100-015-263SW NEW PMAG 20 GEN M3, 10-Pak 127.99 #100-014-635SW NEW.338 M11 Muzzle Brake, Black 119.99 #100-011-418SW NEW PMAG 10 GEN M3, Each 13.25 #100-014-636SW NEW.338 M41 Muzzle Brake, Black 119.99 #100-015-264SW NEW PMAG 10 GEN M3, 10-Pak 127.99 21 Rests, Bipods & Range Accessories A. Harris Ultralight Bipods Harris Bipods are versatile, sturdy, ITEM # STYLE HEIGHT MODEL light, fast, and are made from high #416-005-001SW 1A2 6" to 9" BR $73.99 A strength anodized aluminum alloys. #416-005-101SW 1A2 6" to 9" BRM 73.99 Stress parts are tempered spring steel. #416-025-227SW 1A2 13" to 27" 25C 89.99 Bipods can be clamped to most QD 1A2 9" to 13" LM stud equipped rifles. All have sling #416-002-123SW 73.99 attachment provisions and adjustment #416-005-000SW S 6" to 9" BR 103.99 for off center studs. Spring loaded #416-005-100SW S 6" to 9" BRM 103.99 folding legs are quickly adjustable for #416-001-121SW 1A2 9" to 13" L 73.99 height. 1A2 series has a solid base. #416-001-221SW S 9" to 13" L 103.99 S series rotates 45° for leveling on #416-025-228SW S 13" to 27" 25C 119.99 uneven ground.. #416-002-223SW S 9" to 13" LM 103.99 If purchasing an “S” Style Bipod, you may want to consider the POD-LOC Kit (sold separately).

B B. Accu-Shot Atlas Bipod Lightweight, aluminum bipod features durable stainless steel locking components and grippy rubber feet to give you a rugged, sure-footed shooting platform. Independently-adjustable, five-position legs extend from 5" to 9" and allow up to 180° of front-to-back adjustment. Pans 30° left or right for smooth target tracking, plus 30° of cant adjustment makes it easy to align your crosshairs, regardless of terrain. Available with three attachment options: a quick-detach Picatinny lever mount, a more permanent two-screw Picatinny mount, or a No-Clamp mounting option that fits any 17S size lever-style mount when using the proper adapter (sold separately). #100-012-045SW BT10-LW17 QD Picatinny Mount Bipod $279.95 #100-012-043SW BT10 Picatinny Mount Bipod 219.95 #100-012-044SW BT10-NC Bipod 219.95

C. Sinclair Heavy Varmint Shooting Rest Features fully upgraded hardware such as a heavy-duty stainless steel center column and 1” stainless post, C oversized scalloped hand wheel with thrust bearing for ultra-smooth vertical adjustments, large ½”-20 thread rest feet with oversized aluminum anodized knobs (no plastic parts here), and a fully adjustable forend stop for shot-after-shot repeatability. These rests weigh up to 17 lbs. with filled sand bag – designed to stay in its place on your bench top. Available in both windage and non-windage versions. Sale prices valid thru Jan. 12. #749-013-850SW Heavy Varmint All-Purpose Rest $299.99 $269.99 #749-013-860SW Heavy Varmint Bench Rest 303.99 $279.99 #749-013-861SW Heavy Varmint Windage Bench Rest, RH Shooter 399.99 $349.99 #749-013-862SW Heavy Varmint Windage Bench Rest, LH Shooter 399.99 $349.99 #749-013-851SW Heavy Varmint All-Purpose Windage Bench Rest, RH Shooter 379.99 $359.99 #749-013-852SW Heavy Varmint All-Purpose Windage Bench Rest, LH Shooter 379.99 $359.99

For both the Heavy Varmint and D. Sinclair Competition Shooting Rest Competition rests, The Sinclair Competition Shooting Rest is a result of our staff and our customer’s years of shooting experience. you will need to order This windage rest’s foundation is a 1" solid steel base plate with a durable powder coat finish. It’s a massive unit a front bag in addition to – over 30 lbs. - with a very low center of gravity combined with a footprint that’s no larger than other tripod rests the rest. We recommend Sale prices valid thru Jan. 12. the Protektor Leather/ currently on the market. Cordura or Edgewood #749-101-023SW Sinclair Competition Rest w/Benchrest Top $649.99 $599.99 standard front #749-008-509SW Sinclair Competition Rest w/All-Purpose Top 649.99 $599.99 D bags. #749-122-023SW Sinclair Competition Rest w/BR Top - Non-Windage Adj. 559.99 $499.99 #749-013-831SW Sinclair Competition Rest w/AP Top - Non-Windage Adj. 549.99 $499.99 #749-008-510SW Port Level Ammo Block - 22 & 6mm PPC 69.99 $59.99 #749-008-511SW Port Level Ammo Block - BR Family, 308 Win Family, 6.5/284 69.99 $59.99

Protektor Rear Bag w/Handle The Deluxe Protektor Rear Bag has a “built-in” carry handle in the bottom. Bottom adds stiffness, stability, and over 1" to the bag height. Makes it the popular choice in F-class Competition, field shooting, or anybody shooting from the ground with a bipod or rest. Midsize-ears (between short bunny and tall rabbit ear heights) provide excellent stock support and have enough space between them to accom- modate most target stocks. Available in Cordura nylon or leather ear models. #749-101-724SW Deluxe Rear Bag w/Handle - Cordura $89.99 #749-101-725SW Deluxe Rear Bag w/Handle - Leather 89.99 22 C B A

E

D

A. MagnetoSpeed V3 D. Peltor Tactical Sport Hearing Protection Barrel-Mounted Chronograph Electronic muffs have a new ASIC chip technology for clearer, cleaner, and more refined audio. The loud impulse noise shut-down is lightning fast, but so gentle you will hardly The MagnetoSpeed V3 chronograph attaches directly to the barrel of your gun, so there’s no notice the shutdown. These muffs are comfortable for all day wear, amplify ambient sound, need for tripods, long wires, and bulky readout boxes. The sensor unit houses two electro- have auto shut-off after two hours and run on easy to change (external compartment) AAA magnetic sensors that detect the presence of the bullet, then relays the information to the batteries. Ear cups are ergonomically designed for wearer’s comfort and contoured for a small display unit. Shot information displayed includes minimum and maximum velocity, good rifle stock weld. Interchangeable orange and black ear cup covers are included. Audio average velocity, standard deviation, extreme spread - even has a rapid-fire mode, capable of input port for cell phones, field radios, and MP3 players, too. NRR 18. calculating rate of fire. Data can be easily transferred from the display unit in spread sheet format using a micro-SD card. Rugged sensor unit is engineered to stand up to extreme #749-007-646SW Peltor Tactical Sport Hearing Protector $109.99 muzzle blast and recoil yet still deliver accurate readings. Can be used on rifles, pistols, and #749-004-335SW Peltor FL6N Audio Input Jack 49.99 shotguns with barrels ½" up to 2" in diameter. #100-014-631SW NEW Magnetospeed V3 Chronograph $379.99 E. Peltor Bull’s Eye “6” Shotgunner Stow-a-way design with an ultra low tapered ear cup bottom that eliminates interference with the gun stock. These muffs were originally designed for shotgunning, but because of the low profile we use them when shooting prone or off the bench. Liquid/foam ear cush- B. Shooting Stool ions. Red or black domes. Noise reduction rating of 21dB. Want a great adjustable shooting stool? We have tried all kinds at our range and at different ranges all over the country. This stool is the one we like best. It’s durable, comfortable, and #749-003-057SW Peltor Bull’s Eye “6” Shotgunner - Black $17.99 easily adjusts to different bench heights. It has a padded, weather-resistant, 14" diameter #749-003-058SW Peltor Bull’s Eye “6” Shotgunner - Red 17.99 seat that’s very comfortable. Features an control handle for adjusting from approximately 17" collapsed height to a 25" extended height. The stool is supported by a single stem with five legs that provide a very stable platform. Great for use at your reloading bench, too. Sale prices valid thru Jan. 12. Kestrel 4500 Weather Meter #749-007-602SW Shooting Stool $104.95 $94.99 The Kestrel 4500 addresses wind direction and wind speed, plus it has a digital compass and calculates headwind/tailwind and crosswind by referencing a user set target direction. All this directional information and the other environmental readings are stored in the built-in 1,400 data point memory. Weather functions: heading (true & magnetic), wind direction, crosswind/headwind/tailwind, altitude, barometric pressure C. Pelican Watertight Protector and pressure trend, wet bulb temperature, relative humidity, heat stress Gun Case index, dewpoint, density altitude, wind chill, air/water/snow temperature Super-tough, lightweight hardshell case protects your valuable gun from just about any pun- in Fahrenheit or Centigrade, and current/average/maximum air velocity. ishment you can dish up, from everyday bangs and dings to the rigors of tactical operations. Also available with built-in ballistics software - your choice or Horus Even floats, so a gun overboard isn’t lost for good. Holds rifles or shotguns up to 42" long, ATrag or Applied Ballistics - that eliminates the need to run a separate with extra space for handguns, magazines, or accessories. An outer shell of high impact, ballistics program on a laptop. Results can be logged, graphed, and polypropylene structural resin has an open-cell core and solid walls, while high-density recalled to reveal trends – plus, it all can be uploaded to a computer later. polyurethane foam inside protects the gun from vibration and shock. A tongue-and-groove #749-008-373SW Kestrel 4500 Weather Tracker - Yellow $299.00 lid with a neoprene O-ring provides an airtight, waterproof seal, while the unique, one-way #749-101-229SW 399.00 automatic purge valve equalizes pressure inside. Polyurethane transport wheels with nylon Kestrel 4500 Weather Tracker w/Blue Tooth - Green hubs and steel bearings make this case easy to roll. #100-011-040SW Kestrel 4500 Weather Meter w/Horus ATrag Software 589.00 #100-015-181SW NEW Kestrel 4500 Weather Meter w/Applied Ballistics #100-002-324SW NEW Pelican Protector Rifle/Shotgun Case $274.99 Software 589.00

Radians Shooting Glasses Economical, practical shooting glasses give an unhindered view of the target for shooting anytime Origin – day or night. Clear, fog- and impact-resistant polycarbonate lenses meet ANSI Z87.1 standards to protect your eyes from flying brass, debris, and 99% of harmful UVA/UVB rays. Origin model has Revelation a one-piece lens, 4-position length-adjustable, rubber-tipped temples, and a self-adjusting rubber nosepiece to prevent slippage. Revelation has individual lenses, 5-position length-adjustable tem- ples, and a rubber nosepiece. #105-000-081SW Origin Shooting Glasses $7.99 #105-000-080SW Revelation Shooting Glasses $8.99 23 Products For The Precision Shooter 800-717-8211 www.sinclairintl.com 200 South Front Street Montezuma, IA 50171

Customer Number

Source Code

Shop Online From Anywhere Scan this QR code into your web-enabled mobile device to surf and make purchases at Sinclairintl.com.

To ensure Christmas delivery, order by these dates: DEC. 12 DEC. 19 Economy DEC. 16 two-day ground DEC. 22 next-day Tis the Season to Save with REBATES

www.sinclairintl.com/rebates

Check back often to save BIG all year long on great products from top manufacturers