Gun Data Codes As of March 31, 2021 Gun Data Codes Table of Contents
Gun Data Codes As of March 31, 2021 Gun Data Codes Table of Contents 1 Gun Data Codes Introduction 2 Gun Make (MAK) Field Codes 3 Gun Caliber (CAL) Field Codes 4 Gun Type Field Codes 4.1 Gun Type Characteristic 1 Weapon Type (Required) Field Codes 4.2 Gun Type Characteristic 2 Weapon Description (Optional) Field Codes 4.3 Gun Type Combination Field Codes 5 Gun Color and Finish Field Codes 1 - Gun Data Codes Introduction Section 2 contains MAK Field codes listed alphabetically by gun manufacturer. If a make is not listed, the code ZZZ should be entered as characters 1 through 3 of the MAK Field with the actual manufacturer's name appearing in positions 4 through 23. This manufacturer's name will appear as entered in any record response. If the MAK Field code is ZZZ and positions 4 through 23 are blank, the MAK Field will be translated as MAK/UNKNOWN in the record response. For unlisted makes, the CJIS Division staff should be contacted at 304-625-3000 for code assignments. Additional coding instructions can be found in the Gun File chapter of the NCIC Operating Manual. For firearms (including surplus weapons) that are U.S. military-issue weapons, the MAK Field code USA should be used. Common U.S. military-issue weapons include the following U.S. Military-Issue Weapons: U.S. Military-Issue Weapons .45 caliber and/or 9 mm U.S. Submachine Guns: M1, M1A1, M1928, M1928A1(Thompson), M50, M55 (Reising), M42 (United Defense), M3, M3A1 ("Grease Gun") .45 caliber U.S.
[Show full text]