Digitizer Operating System Support
Total Page:16
File Type:pdf, Size:1020Kb
Load more
Recommended publications
-
Install Redhat/Centos Operating System on UCS M-Series Server
Contents Introduction Prerequisites Requirements Components Used Background Information Download Required Driver ISO Bundle Steps to install RHEL 7.0 or CentOS 7.0 Verify Steps to install RHEL 6.5 or CentOS 6.5 Verify Post Installation Verification Related Information Introduction This document describes how to install Redhat Enterprise Linux ( RHEL ) or CentOS Linux on the Cisco Unified Computing System (UCS) M-Series server using local storage. Prerequisites Requirements Cisco recommends that you have knowledge of these topics: ● Cisco UCS Manager 2.5 or 3.1 version ● Storage Profiles ● Linux Operating Systems (OS) Components Used The information in this document is based on UCS M-Series. The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command. Background Information Cisco M-Series modular server is one of the Cisco products that represents Composable Infrastructure design. The modular servers do not have a local storage but a centralized storage that can be shared by all servers. To access the shared storage, OS requires new Small Computer System Interface (SCSI) driver called as storage Network Interface Card ( sNIC ) and has to be added during installation for OS to detect the disks. The next few sections of this document provides information on how to download the driver and install it during the OS installation. Download Required Driver ISO Bundle The UCS Hardware and Software Interoperability Matrix outlines the driver versions that are required for a particular OS, device, and firmware combination.These links for the Matrix Utility Tool and the Matrix PDFs, determines the required driver version. -
IBM Power Systems Private Cloud Solution Is Enhanced to Support Selected SUSE Linux Enterprise Server Subscriptions As Shared Utility Capacity Resources
IBM United States Hardware Announcement 121-045, dated April 20, 2021 IBM Power Systems Private Cloud Solution is enhanced to support selected SUSE Linux Enterprise Server subscriptions as Shared Utility Capacity resources Table of contents 1 Overview 1 Description 1 Key requirements 2 Order now 1 Effective date Overview The IBM(R) Power(R) Systems Private Cloud Solution with Shared Utility Capacity was initially launched with support to share Base processor and memory hardware resources, as well as AIX(R) and IBM i license entitlements, across a collection of similar Power servers in an enterprise. Now, selected SUSE Linux(R) Enterprise Server (SLES) subscription offerings will be supported as Base and Metered Capacity resources within an IBM Power Enterprise Pool (2.0) of IBM Power System E980 or E950 servers. Key requirements • For Linux metering, HMC 950 is required. Effective date April 30, 2021 Description SUSE Linux Enterprise Server subscription offerings will now be monitored, shared as Base Capacity, and made available as pay-per-use Metered Capacity resources when a Power Enterprise Pool (2.0) consisting of Power E980 or Power E950 systems is started: 5639-15S 5639-12S SUSE Linux Enterprise Server for Power with Base 1 - 2 Socket, Unlimited LPAR and Priority Subscription or Priority Subscription/Support features 5639-SAP SUSE Linux Enterprise Server for SAP Applications for Power with 1 - 2 Socket, Unlimited LPAR and Priority Subscription or Priority Subscription/Support features Base Capacity resources may be shared across systems within a pool. SLES Base subscription entitlement for each system will be set to the number of cores available in the quantity of sockets entitled by the current, valid subscription for that system IBM United States Hardware Announcement 121-045 IBM is a registered trademark of International Business Machines Corporation 1 (the number of cores per chip multiplied by the quantity of sockets acquired in the current subscription). -
Getestete Versionen Wine Debian Und Dessen Derivate (Ubuntu/Kubuntu/Xubuntu, Knoppix, Etc) Redhat, Fedora, Centos Opensuse Mandr
Wie kann die MSR-Software unter Linux verwendet FAQ werden ? MSR Electronics GmbH Getestete Versionen Gentoo Linux 2.6.34 64-Bit Wine 1.3.3 MSR PC-Software V5.10.18 → VERSION Wine Für den Betrieb der MSR PC-Software unter Linux ist die Software Wine1 erforderlich. Diese muss zuerst installiert werden. Für die verschiedenen Linux Distributionen wird dies mittels ver schiedener Kommandos getan. Debian und dessen Derivate (Ubuntu/Kubuntu/Xubuntu, Knoppix, etc) Entweder die offiziellen Pakete der Distribution verwenden (oft veraltet): $ sudo apt-get install wine Oder die neusten Pakete der Wine Maintainer verwenden (empfohlen): $ sudo add-apt-repository ppa:ubuntu-wine/ppa $ sudo apt-get updates $ sudo apt-get install wine1.3 RedHat, Fedora, CentOS Wine sollte sich in den offiziellen Quellen befinden. $ sudo yum install wine die Option --enablerepo=updates-testing erzwingt die neuste Version aus dem testing Repository: openSUSE Mittels YaST2 oder yum (siehe RedHat). Eventuell lohnt es sich auch, die neuste Version vom openSUSE Build Server herunterzuladen respektive diesen einzubinden, siehe dazu auch die entsprechende Webseite2. Mandriva Offizielle Version: $ su $ urpmi wine oder neuste Version von der Sourceforge Seite3. Gentoo $ emerge wine 1 Wine Is Not an Emulator: ist eine Windows-kompatible Laufzeitumgebung für POSIX-kompatible Betriebssyste me. Mit Wine ist es möglich, viele Programme, die für die Microsoft-Windows-Betriebssysteme kompiliert wur den, auch unter Unix mit dem X Window System laufen zu lassen. 2 http://download.opensuse.org/repositories/Emulators:/Wine/ 3 http://sourceforge.net/projects/wine/files/Mandriva Packages/ Version 0.9 Draft 1/5 Wie kann die MSR-Software unter Linux verwendet FAQ werden ? MSR Electronics GmbH Eventuell funktionieren oben genannte Kommandos nicht unter allen Versionen der entspre chenden Distributionen. -
An User & Developer Perspective on Immutable Oses
An User & Developer Perspective on Dario Faggioli Virtualization SW. Eng. @ SUSE Immutable OSes [email protected] dariof @DarioFaggioli https://dariofaggioli.wordpress.com/ https://about.me/dario.faggioli About Me What I do ● Virtualization Specialist Sw. Eng. @ SUSE since 2018, working on Xen, KVM, QEMU, mostly about performance related stuff ● Daily activities ⇒ how and what for I use my workstation ○ Read and send emails (Evolution, git-send-email, stg mail, ...) ○ Write, build & test code (Xen, KVM, Libvirt, QEMU) ○ Work with the Open Build Service (OBS) ○ Browse Web ○ Test OSes in VMs ○ Meetings / Video calls / Online conferences ○ Chat, work and personal ○ Some 3D Printing ○ Occasionally play games ○ Occasional video-editing ○ Maybe scan / print some document 2 ● Can all of the above be done with an immutable OS ? Immutable OS: What ? Either: ● An OS that you cannot modify Or, at least: ● An OS that you will have an hard time modifying What do you mean “modify” ? ● E.g., installing packages ● ⇒ An OS on which you cannot install packages ● ⇒ An OS on which you will have an hard time installing packages 3 Immutable OS: What ? Seriously? 4 Immutable OS: Why ? Because it will stay clean and hard to break ● Does this sound familiar? ○ Let’s install foo, and it’s dependency, libfoobar_1 ○ Let’s install bar (depends from libfoobar_1, we have it already) ○ Actually, let’s add an external repo. It has libfoobar_2 that makes foo work better! ○ Oh no... libfoobar_2 would break bar!! ● Yeah. It happens. Even in the best families distros -
Download Android Os for Phone Open Source Mobile OS Alternatives to Android
download android os for phone Open Source Mobile OS Alternatives To Android. It’s no exaggeration to say that open source operating systems rule the world of mobile devices. Android is still an open-source project, after all. But, due to the bundle of proprietary software that comes along with Android on consumer devices, many people don’t consider it an open source operating system. So, what are the alternatives to Android? iOS? Maybe, but I am primarily interested in open-source alternatives to Android. I am going to list not one, not two, but several alternatives, Linux-based mobile OSes . Top Open Source alternatives to Android (and iOS) Let’s see what open source mobile operating systems are available. Just to mention, the list is not in any hierarchical or chronological order . 1. Plasma Mobile. A few years back, KDE announced its open source mobile OS, Plasma Mobile. Plasma Mobile is the mobile version of the desktop Plasma user interface, and aims to provide convergence for KDE users. It is being actively developed, and you can even find PinePhone running on Manjaro ARM while using KDE Plasma Mobile UI if you want to get your hands on a smartphone. 2. postmarketOS. PostmarketOS (pmOS for short) is a touch-optimized, pre-configured Alpine Linux with its own packages, which can be installed on smartphones. The idea is to enable a 10-year life cycle for smartphones. You probably already know that, after a few years, Android and iOS stop providing updates for older smartphones. At the same time, you can run Linux on older computers easily. -
The BIG Change for Opensuse Leap 15.3 About Me
The BIG Change for openSUSE Leap 15.3 About Me openSUSE Manager Hobbies ● Marketing/PR ● Fantasy Sports ● Event Organizer ● Mining ● Coordinate Event ● Series Binge Watcher Sponsorship Interesting Fact Education Christopher Reeve was ● MBA - Business to blame for me breaking my arm ● BA - Education Douglas DeMaio (Superman 1978) V International GNU Health Conference - Nov. 20 - 21, online event - #GHCon2020 The Way to openSUSE Leap 15.3 bout Me !losing the Leap Gap What is it & why does it matter. Jump 15.&.1 Leap 15.3 The efforts to change What to expect with in how a distribution is coming releases of this built openSUSE distribution What is openSUSE Leap Leap is trying to bridge “Community and Enterprise” the distribution is based on the latest version of SUSE Linux Enterprise available to the date, typically with a 12 months release cycle. Leap 15.2 Retrospective told us that users value most the installer, stability, seamless migrations, and YaST. These would be then our strengths according to users! The distribution is often profiled as the more stable one and easy to use as there should be no radical or disruptive changes in between minor updates. Some users say It’s the KDE distribution. Box says “The Linux Distribution for Beginners and Pros” !"osing the Leap Gap ● CtLG is a SUSE driven effort to bring Leap closer to SUSE Linux Enterprise than ever before. This brings quite some challenges but also open some new opportunities. ● Unification of openSUSE Leap and SUSE Linux Enterprise 15 code streams and feature set. ● Concept of building a community distribution by combining rpms from openSUSE Backports (community part) and SUSE signed SLE rpms (Enterprise part). -
Technology Overview New Features Backupedge
Technology Overview - BackupEDGE™ Introduction to the New Features in BackupEDGE 3.x Technology Overview BackupEDGE has a long history of providing reliable data protection for New Features many thousands of users. As operating systems, storage devices and BackupEDGE 3.x usage needs and tendencies have changed over the years, it has continuously met the challenge of providing inexpensive, stable backup and disaster recovery on a variety of UNIX and Linux platforms. Clients routinely find new and clever ways to utilize products. Storage devices have taken on new and exciting features, and incredible capacities. Products designed years ago had built-in limits that were thought to be beyond comprehension. Today, these limits are routinely exceeded. The need for data security is even more apparent. We’re constantly asking our To continue to meet the evolving needs of our clients, we are always clients what tools our asking what features of our products they find most useful, what products need to serve them improvements we can make, and what new requirements they have. better. We’ve used this knowledge to map out new product strategies designed to anticipate the needs of the next generation of users, systems and storage products. This has resulted in the creation of BackupEDGE 3.x, with a combination of internal improvements, new features and enhanced infrastructure designed to become the backbone of a new generation of storage software. Summary of Major Changes and Additions BackupEDGE 3.x features include: • Improvements to partition sizing, UEFI table cleanup after DR, and SharpDrive debugging (03.04.01 build 3). • Support for Rocky Linux 8.4 and AlmaLinux 8.4 (03.04.01 build 2). -
Debian GNU/Linux Installation Guide Debian GNU/Linux Installation Guide Copyright © 2004 – 2015 the Debian Installer Team
Debian GNU/Linux Installation Guide Debian GNU/Linux Installation Guide Copyright © 2004 – 2015 the Debian Installer team This document contains installation instructions for the Debian GNU/Linux 8 system (codename “jessie”), for the 32-bit soft-float ARM (“armel”) architecture. It also contains pointers to more information and information on how to make the most of your new Debian system. Note: Although this installation guide for armel is mostly up-to-date, we plan to make some changes and reorganize parts of the manual after the official release of jessie. A newer version of this manual may be found on the Internet at the debian-installer home page (http://www.debian.org/devel/debian-installer/). You may also be able to find additional translations there. This manual is free software; you may redistribute it and/or modify it under the terms of the GNU General Public License. Please refer to the license in Appendix F. Table of Contents Installing Debian GNU/Linux 8 For armel......................................................................................ix 1. Welcome to Debian .........................................................................................................................1 1.1. What is Debian? ...................................................................................................................1 1.2. What is GNU/Linux? ...........................................................................................................2 1.3. What is Debian GNU/Linux?...............................................................................................3 -
Zypper Cheat Sheet Or Type M an Zypper on a Terminal
More Information: Page 1 Zypper Cheat Sheet https://en.opensuse.org/SDB:Zypper_usage or type m an zypper on a terminal For Zypper version 1.0.9 Package Management Source Packages and Build Dependencies Basic Help Selecting Packages zypper source-install or zypper si Examples: zypper #list the available global options and commands By capability name: zypper si zypper zypper help [command] #Print help for a specific command zypper in 'perl(Log::Log4perl)' Install only the source package zypper shell or zypper sh #Open a zypper shell session zypper in qt zypper in -D zypper By capability name and/or architecture and/or version Install only the build dependencies zypper in 'zypper<0.12.10' Repository Management zypper in -d zypper zypper in zypper.i586=0.12.11 Listing Defined Repositories By exact package name (--name) Updating Packages zypper in -n ftp zypper repos or zypper lr By exact package name and repository (implies --name) zypper update or zypper up Examples: zypper in factory:zypper Examples: zypper lr -u #include repo URI on the table By package name using wildcards zypper up #update all installed packages zypper lr -P #include repo priority and sort by it zypper in yast*ftp* with newer version as far as possible By specifying a .rpm file to install zypper up libzypp zypper #update libzypp Refreshing Repositories zypper in skype-2.0.0.72-suse.i586.rpm and zypper zypper refresh or zypper ref zypper in sqlite3 #update sqlite3 or install Installing Packages Examples: if not yet installed zypper ref packman main #specify repos to be -
Snort 2.9.9.X on Opensuse Leap 42.2
Snort Installation on openSUSE Leap 42.2 64 bits Boris A. Gómez Universidad Tecnológica de Panamá July 2017 About This Guide This guide has been tested on openSUSE Leap 42.2, 64 bits, using DAQ 2.0.6 and Snort 2.9.9.0. Software was installed in a virtual machine: Virtual Machine Manager: VirtualBox 5.1.22 or KVM 1.4.0 HOST operating system: Windows 7 or openSUSE Leap 42.2 GUEST operating system: openSUSE Leap 42.2 (Snort will be installed here) For clarity, the following color code was used: Orange – commands that the user types at the shell prompt. Blue – text inside of configuration files. Purple – text to focus your attention on. This guide is based on the document "Snort 2.9.8.x on OpenSuSE 13x" by William Parker. Network Card Configuration Run VirtualBox | KVM manager and configure the network section of the guest machine to bridge mode. KVM Manager: VirtualBox Manager: Guest Machine Start your guest machine and set its network interface card to a static IP, for example 192.168.99.10, then check settings: ifconfig eth0 Link encap:Ethernet HWaddr 08:00:27:50:CA:99 inet addr: 192.168.99.10 Bcast:192.168.99.255 Mask:255.255.255.0 Verify that you can access Internet by accessing a web page, for example: https://snort.org Before proceeding, it is advisable to update the system. Required Packages Use YAST to install the following packages: gcc version 4.8.x (including libraries: libgcc_s1 (5.3.1), libgcc_s1-32bit(5.3.1)) flex (2.5.37) bison (2.7) php5-zlib (5.5.14 including zlib-devel 1.2.8) libpcap1 (1.8.1 including libpcap-devel 1.8.1) (versions must match) libpcre1 (8.39 including pcre-devel 8.39 and libpcre1-32bit 8.39) (versions must match) libdnet1 (1.12 including libdnet-devel 1.12) (versions must match) tcpdump (4.5.1). -
Linux Based Mobile Operating Systems
INSTITUTO SUPERIOR DE ENGENHARIA DE LISBOA Área Departamental de Engenharia de Electrónica e Telecomunicações e de Computadores Linux Based Mobile Operating Systems DIOGO SÉRGIO ESTEVES CARDOSO Licenciado Trabalho de projecto para obtenção do Grau de Mestre em Engenharia Informática e de Computadores Orientadores : Doutor Manuel Martins Barata Mestre Pedro Miguel Fernandes Sampaio Júri: Presidente: Doutor Fernando Manuel Gomes de Sousa Vogais: Doutor José Manuel Matos Ribeiro Fonseca Doutor Manuel Martins Barata Julho, 2015 INSTITUTO SUPERIOR DE ENGENHARIA DE LISBOA Área Departamental de Engenharia de Electrónica e Telecomunicações e de Computadores Linux Based Mobile Operating Systems DIOGO SÉRGIO ESTEVES CARDOSO Licenciado Trabalho de projecto para obtenção do Grau de Mestre em Engenharia Informática e de Computadores Orientadores : Doutor Manuel Martins Barata Mestre Pedro Miguel Fernandes Sampaio Júri: Presidente: Doutor Fernando Manuel Gomes de Sousa Vogais: Doutor José Manuel Matos Ribeiro Fonseca Doutor Manuel Martins Barata Julho, 2015 For Helena and Sérgio, Tomás and Sofia Acknowledgements I would like to thank: My parents and brother for the continuous support and being the drive force to my live. Sofia for the patience and understanding throughout this challenging period. Manuel Barata for all the guidance and patience. Edmundo Azevedo, Miguel Azevedo and Ana Correia for reviewing this document. Pedro Sampaio, for being my counselor and college, helping me on each step of the way. vii Abstract In the last fifteen years the mobile industry evolved from the Nokia 3310 that could store a hopping twenty-four phone records to an iPhone that literately can save a lifetime phone history. The mobile industry grew and thrown way most of the proprietary operating systems to converge their efforts in a selected few, such as Android, iOS and Windows Phone. -
Installation Oreka TR on Linux Centos 7 - 1 Prerequisites (Provided by Customer)
Installation Oreka TR in Linux Contents What is Oreka TR? 1 Architecture 1 Prerequisites (provided by customer): 2 Prerequisites (provided by Orecx): 2 OrkAudio Installation 3 Configuring OrkAudio for Active Recording 5 Upgrading OrkAudio (optional) 6 Orkwebapps Installation 8 Additional documentation: 12 Upgrading Orkwebapps 12 What is Oreka TR? Oreka TR is an enterprise cross-platform system for recording and retrieval of audio streams, computer screens, and text messages (SMS). It supports recording from VoIP telephony systems via active and passive recording methods. It also supports recording from TDM telephony systems. The Oreka TR user interface (OrkUI) is web-based and provides a rich feature set such as call live monitoring, recordings playback, extensive search and query capabilities, audit trail, reporting, tagging, media manager, and many others. Architecture The Oreka TR system consists of a combination of the following services: ● OrkAudio : This is the audio capture background service. It supports active and passive VoIP recording as well as TDM based recording. ● OrkTrack : This service centrally tracks activity on the entire system and logs recordings to any popular SQL database. It is also responsible for background tasks such as the Media Manager, User and Group Auto-Provisioning as well as most API functionality through a RESTful interface. ● OrkUI: This service is the web interface accessible via any standard compliant web browser. It relies on the Tomcat web server. Installation Oreka TR on Linux CentOS 7 - 1 Prerequisites (provided by customer): ● Centos 7.x – 64-bit (minimal ISO or higher) or RHEL 7.x/8.x ● For hardware requirements see: http://files.orecx.com/docs/oreka-voip-server-specs.pdf ● Root-level or Administrator access on the server ● Internet connection to download MySQL or MariaDB as well the Oreka TR installation files Prerequisites (provided by Orecx): ● Valid OrkAudio and OrkWeb Licenses ● OrkAudio installer (e.