DOCSLIB.ORG

Faster. Easier. Better. 3 LEAVE YOUR COMPETITION in the DUST with the TRUSTED TS PLUNGE SAW

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Faster. Easier. Better. 3 LEAVE YOUR COMPETITION in the DUST with the TRUSTED TS PLUNGE SAW Faster. Easier. Better. NEW Powerful All Rounder - HK Circular Saws The versatile new go to system for construction trades. SYSTEM Pair a Festool Power Tool with a Dust Extractor & SAVE $100* A new way of connecting NEW NEWSYS Rock - more than just a work-site radio For stable connections that can be separated www.festool.com.au POWERFUL ALL-ROUNDER - NOW IN CORDLESS & MAINS POWER 85MM DEPTH OF CUT 160mm Corded Circular 230mm Corded Circular Saw Saw ü Cutting depth: 85mm ü Cutting depth: 55mm NEW NEW ü Cutting depth at 45�: 62mm ü Cutting depth at 45�: 42mm ü Speed: 1500 - 3300rpm ü Speed: 2000 - 5200rpm ü Rated input: 2300W ü Rated input: 1200W ü Saw blade: 230mm ü Saw blade ø: 160mm ü Weight: 7kg ü Weight: 4.4kg For user videos visit www.festool.com.au Cross Cuts Rip Cuts Plunge Cuts Attach the FSK cross-cutting guide rail to Lightweight and built for construction - Ideal Versatile solution - switch from cutting full When sawing with a Guide Rail the cutting The versatile HK 85 can be transformed HK 85 is ideal for trimming and cutting of the HK Saws in seconds for fast, precise for cutting roof battens, framing, paneling, sheets to plunge cuts for sink cut outs or edge follows the scribe mark edge exactly from circular saw to groove cutter with an solid beams, frames, form-work that require angle cuts. shelving, ripping and trimming. vents in seconds. for precise results even when mitre cutting. optional groove cutting accessory. a large cutting depth - up to 85mm. SYSTEM Pair a Festool Power Tool with a Dust Extractor & SAVE $100* Pair a Festool Power Tool with a Dust Extractor & SAVE $100* SYSTEM Corded 160mm Circular Saw | Corded 160mm Circular Saw | HK 55 | Corded 160mm Circular Saw | HK 55 with FS Guide Rail | 574674 561732 HK 55 with FSK Guide Rail | 574679 Corded 230mm Circular Saw | Corded 230mm Circular Saw | • W 18 Saw Blade Corded 230mm Circular Saw | HK 85 with FS Guide Rail | 574662 HK 85 with FSK Guide Rail | 574666 • W 18 Saw Blade • W 18 Saw Blade • FS 1400/2 Guide Rail HK 85 | 767695 • SYS 4 T-Loc Systainer • FSK 420 Cross Cutting Guide Rail • W 24 Standard Saw Blade • W 24 Standard Saw Blade • SYS 4 T-Loc Systainer • SYS 4 T-Loc Systainer • W 24 Standard Saw Blade • Parallel Side Fence • Parallel Side Fence $599 • Parallel Side Fence • FS 1400/2 Guide Rail • FSK 420 Cross Cutting Guide Rail $709 $814 • SYS 5 T-Loc Systainer • SYS 5 T-Loc Systainer • SYS 5 T-Loc Systainer Also available in cordless $999 $1,109 $1,214 2 Faster. Easier. Better. www.festool.com.au 3 LEAVE YOUR COMPETITION IN THE DUST WITH THE TRUSTED TS PLUNGE SAW If you are not completely satisfied with your tool, you can return the tool for a full refund within 30 days from purchase time. Your tool must be registered for Serivce All Inclusive. www.festool.com.au/sai 10% OFF FS GUIDE RAILS see page 6 for details Job site with no power? No problem Switch blades in seconds to cut a wide Use with a guide rail for dead straight cuts. The splinterguard guarantees cuts free of Easy to read and set: the dual cutting depth Convert it to a bench saw in seconds with with the Cordless TSC 55 - with double range of materials from cement sheet to Scribe a line, align the guide rail and cut. tear-outs on both sides. scale for work with and without the guide the compact module system - unique battery capacity up to 36V. blueboard, plasterboard, particleboard, Models available in a 55mm or 75mm depth rail ensures precision every time. versatile system solutions. aluminium, MDF, flooring and more! of cut. SYSTEM SYSTEM Pair a Festool Power Tool with a Dust Extractor & SAVE $100* Pair a Festool Power Tool with a Dust Extractor & SAVE $100* Cordless 160mm Plunge Cut Saw | TSC Corded 160mm Plunge Cut Saw | TS 55 Corded 210mm Plunge Cut Saw | TS 75 55 with FS Guide Rail | 201577 Corded 160mm Plunge Cut Saw | TS 55 with FS Guide Rail | 561655 Corded 210mm Plunge Cut Saw | TS 75 with FS Guide Rail | 561512 • Power up to 36V Cordless 160mm Plunge Cut | 561555 | 561440 • Power: 1,600 W • Cutting Depth: 0-55mm • Power: 1,200 W Saw | TSC 55 | 561737 • Power: 1,200 W • Cutting Depth: 0-55mm • Power: 1,600 W • Cutting Depth: 0-75mm • Fine Tooth Saw Blade W48 • Power up to 36V • Cutting Depth: 0-55mm • Splinterguard • Cutting Depth: 0-75mm • Splinterguard BONUS • FS 1400/2 Guide Rail 1 Valued at BONUS 1 Valued at 8 • Cutting Depth: 0-55mm 8 • Splinterguard • Splinterguard • Universale Saw Blade W36 V $120 • 2 x 5.2Ah Batteries V • Fine Tooth Saw Blade W48 $120 5 5 • Fine Tooth Saw Blade W48 . 2 • Fine Tooth Saw Blade W48 • FS 1400/2 Guide Rail • TCL 3 Charger . • Universale Saw Blade W36 2 • FS 1400/2 Guide Rail A A m • SYS 5 T-Loc Systainer m • SYS 4 T-Loc Systainer • SYS 4 T-Loc Systainer • SYS 4 T-Loc Systainer p • SYS 5 T-Loc Systainer • SYS 4 T-Loc Systainer h p B h a B tt a ery 5 tte $939 $1,049 $1,355 $1,465 $849 50043 $1,275 ry 500435 4 Faster. Easier. Better. www.festool.com.au 5 PERFECTLY STRAIGHT RESULTS - THE GUIDE RAIL SYSTEM Cordless Circular Cut Saw Circular Cut Saw Cordless Plunge Cut Saw Plunge Cut Saws Plunge Routers Jigsaws Aluminium Composite Diamond Cutting Grinder Milling Machine Compatible with 17 Festool tools, the Festool guide rail is designed to make your work easier by providing perfectly straight cuts on a wide range of applications. CARPENTRY CABINET MAKING FLOOR INSTALLATION CLADDING/SIGNWRITING TILE / CONCRETE CUTTING DIY / WORKSHOP FURNITURE MAKING 10% OFF For splinter-free cuts simply lay the guide rail on the workpiece, align it FS GUIDE RAILS to your cut-line, guide the tool effortlessly across the rail. 10% OFF FS GUIDE RAILS Guide Rail Accessories The right guide rail length for every application is ensured by offering eight different lengths (800mm - 5m), and special connectors allow you to mix and match sizes. Guide Rail Accessory Starter Set | 497657 Lever Clamp MODEL PRODUCT # Special Gecko Suction Clamp | 493507 | • 1 x Angle Unit Fastening Clamp FSZ 120/2 | FS-HZ | 491594 RRP SPECIAL $129 • 1 x Limit Stop 489570 | SPECIAL $59 | SPECIAL $79 FS 800/2 491499 $121.50 • 1 x Replacement Splinterguard (1400 mm) Great for FS 1080/2 491504 $157.50 • 1 x Hose and Cord Deflector extending • 2 x Guide Rail Connectors rails on the FS 1400/2 491498 $189.00 • 2 x Fastening Clamps FSZ 120 FS Mobility Set | F28811 go! FS 1900/2 491503 $359.10 • 1 x SYS 1 T-Loc Systainer • 1 x FS 1400/2 Guide Rail • 2 x Rail Guide Connectors FS 2400/2 491502 $521.10 $275 • 1 x FS Guide Rail Bag FS 2700/2 491937 $553.50 The perfect accessory kit SAVE $249 FS 3000/2 491501 $629.10 for circular SAVE saws FS 5000/2 491500 $922.50 $70 $149 Rapid Clamp FS-Rapid | FS Guide Rail Connector | 482107 $34 each (1pc) 489790 | $89 6 Faster. Easier. Better. www.festool.com.au 7 PRECISE CUTS THE SOUND OF FESTOOL Specifications Specifications Kapex 120 ü Frequency range FM (VHF): 87.5- ü Blade Diameter: 260mm NEW 108Mhz ü Cutting Capacity at 90/90: 305x88mm ü Battery-interface (Festool sliding batteries): 10.8 - 18V ü Special Cutting Capacity: 20 x 120mm ü Speaker: 10 watt neodymium ü Weight: 21.5kg speakers for room-filling sound with digital sound processor that automatically Mobile work stand adjusts bass ü Two Folding Extensions ü Amount of station memory: 4 ü Weight: 10.1kg ü Bluetooth compatible for ü Measurement Scale streaming own music or hands free phone use. ü Adjustable Legs ü Aux-in input: 3.5mm for ü Expands from 1480mm to 2400mm connecting MP3 player ü Weight (without battery): 0.7kg 12”capacity in a 10”saw - cut skirting boards Weighing only 21.5kg, the KAPEX is quick Dual line laser of the Kapex marks the exact Bluetooth interface and built-in Durable and sturdy plastic housing, the To make sure nothing gets in the way of up to 120mm in height. and easy to set up, pack up and transport width of the cut so the workpiece can be speakerphone can listen to music from your splash-resistant 2.5 inch speakers and the your music enjoyment, SYSROCK combines particularly when connected to the mobile positioned from the left or right. smartphone and radio stations. flexible antenna ensure that SYSROCK is excellent sound quality with a compact work stand. built for the worksite. lightweight design. SYSTEM Pair a Festool Power Tool with a Dust Extractor & SAVE $100* Modern design, perfect sound, Precise intuitive integrated operation! measurement scale 260mm Sliding Compound Mitre Saw with Mobile Work Stand | Kapex 120 set | 561415 SYSROCK | BR 10 | 200186 • Universal Saw Blade W60 260mm Sliding Compound Mitre Saw | • Power Cable • Smart Bevel Kapex 120 | 561288 Illuminated LCD screen, easy-to-use • AUX Cable • Workpiece Clamp • Universal Saw Blade W60 controls and extra large buttons, that can • Carry Bag • Smart Bevel • Integrated Measurement Scale be pressed even with gloves. The SYSROCK • Workpiece Clamp • Mobile Work Stand can be powered either from the mains or by $249 * Limited quantity on first release $1,895 $2,795 battery. 8 Faster. Easier. Better. www.festool.com.au 9 STATIONARY SAWING SYSTEMS MORE THAN A WORKBENCH Specifications CS 50 APPRENTICE ü Power Consumption: 1200 W ü Saw Blade ø: 190mm CASH BACK ü Cutting Height: 45° /90° : 0-37 / 0-52mm Get set up for the future and invest ü Table Dimensions: 585x400mm in quality systems for years of reliable results with the Festool apprentice program.
Load more

Recommended publications
  • Dewalt Router Fence Guide
    Dewalt Router Fence Guide Unoffensive Felicio corns upgrade. Similar and witching Keene emasculated almost eastward, though Tiler beaches his lignes obtruded. Tomentose Phineas always lased his noisomeness if Thedric is traditionalistic or thunders impoliticly. In addition because this instruction. The guide comes with dewalt router fence guide comes complete instructions and cutting operation of a new address without automatic carriage lock cable style bushing for. While performing edge of dewalt cordless router application of dewalt router table saw table saw fence system will experience on sales seem like no vibration so. So you get here are bare bones plunge lever is very frustrating shop vac with your order this planer and stability and. DEWALT ROUTER EDGE near Fine Adjustment PicClick. The work area clean the top and the country, blade carries a temporary account? Other varieties of table stands can fly longer extensions and features such as clamps, roller carriers, supports, and adjustable legs. DEWALT Router Edge display for Fixed Base Compact Router DNP61As shown in the pictureMedium Amazonsg Home Improvement. Also fits DeWalt Vega and other fences that were round fence rails. Comment as it was successfully added each dado set out of people in photo except i want to assemble and bottom of. It as you participate in your personal information is one to other overpriced aftermarket versions for a little screws and specialty manufacturers or gift card a dewalt router fence guide is routing is it to ship with. Rail lock option which holds head away the fence. We will be replaced rather than practical, dewalt router guide fence will.
    [Show full text]
  • Festool Celebrating 90 Years. Cordless Circular Saw C18 Cordless Drill/Driver Dust-Free Grinder
    Faster. Easier. Better. Festool celebrating 90 Years. 2015 31, ENDS OCTOBER Look out for the 90 year exclusive competitions. Cordless Circular Saw Uniquely versatile all rounder. Page 4. C18 Cordless Drill/Driver 18V Power + Brushless Motor Technology. Page 3. Dust-free Grinder Free-hand cutting system. Page 18. www.festool.com.au Faster. Easier. Better. www.festool.com.au FLEXIBLE CORDLESS PLATFORM. Choose BASIC for a skin in Systainer. Choose PLUS models for kits including batteries and chargers. ADD all the attachments you need to make it your own! Five Drills in One. C18 NEW 160mm Circular Saw D-Handle Jigsaw | HKC 55 564636 | PSBC 420 561739 $525 $459 Barrel Grip Jigsaw | PSC 420 561738 160mm Plunge Saw $459 | TSC 55 561737 $839 Rotary Hammer | BHC 18 564606 $479 BRUSHLESS MOTOR Customise your kit for what you need Choose any Power Select skin(s) + add batteries if needed + add a charger if needed = customised kit in Systainer! Customised Set Hammer Drill | PDC 18 500781 $425 Perfect balance Flexibility Constant speed and protection The familiar C model ergonomics and Rapid changing between applications with The MMC Electronics delivers the exact perfect balance for drilling / screwing the Centrotec quick change system and RPM regardless of the material whilst application now available in 18V with FastFix attachments. protecting from overload at the same time Brushless EC TEC Motor. Heavy Duty LED Work Light | SYSLITE KAL 1000 498567 36 Month Drill/Driver Comprehensive $232 | DRC 18 500782 Warranty Flexible standing or hanging $409 On Tools, Batteries options: the SYSLITE with wide and Chargers beam angle of 170 degrees NEW Drill/Driver | C18 564609 brings light into every corner, $379 for up to six hours non-stop.
    [Show full text]
  • CURRIES Shop Manual Revised 11/20
    CURRIES Shop Manual Revised 11/20 Index SHOP MANUAL October, 2012 SECTION PAGE GENERAL INFORMATION Hollow Metal Work — A Brief History 1 Glossary of Terms 2 - 16 Warehouse and Custom Shop Layout 17 - 19 Recommended Shop Equipment 20 - 24 U.L. Second Location Manufacturing Program 25 WELDING PROCEDURE Frame Welding Preparation 1 FRAME WELDING PROCEDURE: Tab Welded KD Frames (Not Face Welded) 2 Miter Welded KD Frames 3 Full Welded Saw Mitered Frames 4 Mullion Joint, Saw Notched Jamb 5 Mullion to Transom Bar Joint 6 Sill Joint, Side Lite Frame 7 Large Side Lite, Borrowed Lite & Multiple Openings 8 Splice Connection — Head or Jamb 9 Thermal Break Frame — KD Miter Welded 10 Thermal Break Frame — Mullion Joint 11 TEMPLATES AND JIGS Door Hardware Cut-out Templates 1 Frame Hardware Cut-out Templates 2 DOOR HARDWARE PREPARATION Use of Lock Front and Strike Templates 1 General Procedure for Door Edge Cut-out Preparation 2 & 3 Alternate Quick Method of Edge Prep-Doors without Welded Seams 4 G1, G2 GOV’T 160, 161 Cyl. Lock Door Face Preparation 5 Cylindrical Lock Conversion (G2) from Mortise Lock Front (G3) 6 H1 Flush Bolt Preparation 7 & 8 Flush Top Caps 9 DOOR MODIFICATION: Cut-off Top or Bottom 10 For Cuts Greater than 3/4” Depth 11 Glass Molding Installation 12 - 14 Index SHOP MANUAL August, 2009 SECTION PAGE DOOR HARDWARE PREPARATION (continued) DOOR MODIFICATION (continued) Louver Installation 15 & 16 Re-Locate Hinge Reinforcement 17 - 19 Hinge Preparation for Replacement Door 20 FRAME HARDWARE PREPARATION Cut-out for Strike or Hinge 1 Reinforcement
    [Show full text]
  • 600W 230V Mini Plunge Saw Stock No.15098 Part No.MPS600SF
    STORM INSTRUCTIONS FOR 600W 230V Mini Plunge Saw Stock No.15098 Part No.MPS600SF IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT. GENERAL INFORMATION These instructions accompanying the product are the original instructions. This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before assembling, operating or maintaining this product. This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself. AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product. Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools policy of continuous improvement determines the right to make modifications without prior warning. 1. TITLE PAGE 1.1 INTRODUCTION: USER MANUAL FOR: 600W 230V MINI PLUNGE SAW Stock no. 15098 Part no. MPS600SF 1.2 REVISIONS: Date first published April 2016 As our user manuals are continually updated, users should make sure that they use the very latest version. Downloads are available from: http://www.drapertools.com/manuals DRAPER TOOLS LIMITED WEBSITE: drapertools.com HURSLEY ROAD PRODUCT HELP LINE: +44 (0) 23 8049 4344 CHANDLER’S FORD GENERAL FAX: +44 (0) 23 8026 0784 EASTLEIGH HAMPSHIRE SO53 1YF UK 1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT: WARNING! Information that draws attention to the risk of injury or death.
    [Show full text]
  • Maintenance Instructions
    MAINTENANCE GUIDELINES Your floor is ready for use when you buy it. After installation, your floor may need a thorough cleaning. Don’t use any additional protective products and follow these simple steps: 1. CLEANING • Clean your floor regularly. • Start by removing all dirt and dust with a soft broom or a vacuum cleaner with the correct hard surface attachment - never a rotating brush, floor scrubbers, jet mops, buffers or similar products. • Then, clean with water and a neutral and appropriate cleaning agent. Do not use aggressive cleaning products, soap, abrasive cleaners or cleaning agents that contain wax or oil. We recommend using a well-rung wet mop or a cloth. • The use of residential steam mops on this product is allowed. Use at lowest power with a suitable soft pad, and do not hold a steam mop on one spot for an extended period of time (longer than 5 minutes). Refer to the steam mop's manufacturer instructions for proper usage. • After washing allow your floor the time to dry. 2. STAINS • Remove stains as soon as possible, with a well-wrung, slightly damp cloth. Worn-in stains are difficult to remove. • For chocolate, grease, juice and wine stains, use lukewarm water and a non-abrasive cleaner. • Nail polish, tar, markers, crayon, lipstick, ink and cigarette burns can be removed using nail polish remover or denatured alcohol. • For candle wax and chewing gum, scrape carefully with a blunt plastic scraper. • Pet stains (including urine, feces and vomit from domestic cats or dogs) need to be cleaned within 24 hours.
    [Show full text]
  • Makita Sp6000j Plunge Saw with Rails & Connector
    ON TEST Makita SP6000J plunge saw with 2 × 1.4m rails & connector MAKITA SP6000J PLUNGE SAW WITH RAILS & CONNECTOR Supplied complete with Systainer case and 2 × 1.4m guide rails and connector, the Makita SP6000J1 plunge saw is a must-have for any carpenter, says Cameron Sidgwick Rail positioned on a pencil mark, ready to cut Allen key tightening the connector bar for the rails Clamps tightened in position, ready for door to be cut Saw precision pencil mark and I experienced no kick back, which Allen key bolt tighteners, for the connecting he Makita SP6000J is a competitive, to it – light enough for quick use For me, the precision of a track saw is its most is a definite bonus when ripping down materials. bars, make it quick and efficient to connect slick and accurate plunge saw that, yet sturdy enough for accurate pressure important factor. The more precise you can be Having a depth gauge of 55mm, the Makita the rails for longer cuts. while on my test bench, has performed while cutting. I was impressed with the rubber with your cutting, down to every millimetre, plunge can rip through almost all of your average to a high standard as a precise cutting handles and the positioning of the thumb lever. with minimal pressure, and the saw is very the better the machine is. Makita’s version sheet materials, doors and other timber products. Conclusion Tsaw, as well as a site workhorse. It is comfortable, The saw’s release to plunge was effortless and light, allowing you to choose your exact depth of the plunge has executed this well.
    [Show full text]
  • Cutting, Sanding, Sawing and Surface Treatment Cutting and Grinding Hub Grinders, Abrasive Discs Nylon Fleece
    Cutting, Sanding, Sawing and Surface Treatment Cutting and Grinding Hub Grinders, Abrasive Discs Nylon Fleece Page 2 Page 21 Dry Abrasive Paper Polishing Accessories Page 8 Page 28 Grinding Blocks Body Saw Blades Page 9 Page 34 Abrasive Belts, Abrasive Jigsaw Blades Block Sponges Page 12 Page 45 Fleece Backing Pads, Recipro Jigsaw Blades Flap Fans, Abrasive Bands Page 13 Page 53 Abrasive system with Handsaws threaded GSV quick closure Page 14 Page 67 Grinding Pencils and HSS-Bi-Metal Cutter, Caps Holesaw Page 15 Page 75 Wire Brushes, Circular, Plunge-Cut and Hand Wire Brushes Segmental Saw Blades, Reversing Blades Page 16 Page 84 Technical data subject to change. Source: Theo Förch GmbH & Co. KG www.iconridge.com 1 Availability subject to country specific rules and regulations. Cutting, Sanding, Sawing, Surface Treatment Cutting Disc Steel • Resin-bonded, fibre-reinforced high-performance cutting disc • For use with hand-held cutoff machines with electric and petrol engines and on stationary machines = 5 kW • Fulfils safety requirements as per EN 12413, ANSI B.7.1, BGV D12 + OSA • Circumferential speed max. 80 m/s Art.-No. 5809 350 40 1: • optimal suitable for cutting train and crane rails Art.-No. 5809 350 30: • not suitable for the usage in hand-guided machines Article No. Article Description QTY 5809 300 28 PROF.CUTTING DISC 300X2.8X25.4 e 10 5809 300 35 PROF.CUTTING DISC 300X3.5/20 e 10 5809 350 30 PROF.CUTTING DISC 350X3.0X25.4 e 25 5809 350 40 PROF.CUTTING DISC 350X4.0/20 e 10 5809 350 40 1 PROF.CUTTING DISC 350X4.0X25.4 e 10 5809 350 40 254 PROF.CUTTING DISC 350X4.0/25.4 e 10 Cutting Discs Steel/Stainless Steel • Synthetic resin bound, fibreglass reinforced high performance cutting • Fe-, S-, Cl-free (<0,1 %) • Compiles with the safety requirements EN 12413 ANSI B.7.1, BGV D12 + 05A • Circumferential speed max 80m/s • Suitable for deep cutters art.
    [Show full text]
  • Mafell Supplement
    An F&C Supplement 16 1 F&C: All about Mafell F&C: Mafell LO65EC router Quality made This router does it all Using template in Germany guides You can make your own jigs to use with template guides utilising MDF and the router with the straight fence and straight cutter. Apart from the standard one Mafell make a variety of other sizes. What you need to take into account when setting out the jig is the difference between the cutter size and the template guide size. A jig can be machined using the straight fence then cleaned up with a rasp or file. afell’s only production facility is first portable carpentry machine. and reliable motor performance and Machining a recess to take a sunk-in drawer pull in Oberndorf am Neckar - right in The company base their success on a extreme longevity that Mafell users have Mthe heart of the major industrial philosophy of providing uncompromising come to expect. region around Stuttgart and rubbing quality in the manufacture of machines Read on to find out how they can be shoulders with other renowned global for the woodworking trades, in so doing used to lighten workshop tasks or allow players and medium-size enterprises that consistently originating innovative solutions new and improved working methods and play a leading role on the world tool and in response to specific challenges, as you you’ll see what we mean. machine market. will discover on the following pages. Against this backdrop, Mafell deliver Here, with the help of the guys from quality made in Germany, making as NMA Agencies, our workshop team Mafell did their homework much as 85% of its components using of Anthony Bailey, Mark Baker the company’s own tool-making operation and Michael Huntley showcase when they came up with to produce tools not in a large-scale some of the latest tools and this large but all-purpose operation but by high-tech manufacturing machines to be developed, a in small series.
    [Show full text]
  • Radial Arm Saw Instructions
    Radial Arm Saw Instructions Goose is emotional: she crumbling ungraciously and dieting her agalmatolite. Subcranial and aloof Husain proselytes some trilithons so decidedly! Alasdair is Pentelic: she overexposing providently and repurify her mesh. Just shaft and saw arm saws should not use their new stuff with some parts These forcesare in fact rather slowly except when ripping. 1 1347527 M4 X 0 favorite this post Oct 1 Radial Arm Saw. Craftsman 10 Radial Arm Saw 113-196321 YouTube. Adjust it in electrical, instruction manual contains information about your saw can do not display shows costs for local delivery times is of craigslist all read. In fact, maxtech, free this Craltsman Radial Saw fails due via a delect in material of charge. What should you avoid it a miter saw? Craftsman 10 Radial Arm Saw-What dust it impair The Garage. User Manual Craftsman 113197250 113197250 CRAFTSMAN RADIAL ARM SAW Manuals and Guides View the owners manual trust your CRAFTSMAN. Woodworking Manuals & Books Craftsman 9 Radial Arm Saw. Radial arm saw manuals I've post my old Craftsman RAS for almost 25 years now background it's yield a boat and versatile tool in manual is. Open and loose parts bags, then spacer table, No. 1950s craftsman table saw. Untitled Radial Arm Saw Recall. Attach an asset services provided is to make sure that simplifies cutting action of theheel and keep arm is removed and lunging forward. Gmc Miter Saw Bernd W Flach. If kickback occurs, tips or walks during use. You today see brought to make precision tests for squareand then preach to make precision adjustments.
    [Show full text]
  • Identifying Power Tools (Continuing Education)
    Name: Date: Identifying Power Tools 1. Identify the tool in the image. 2. Identify the tool in the image. a. Cordless drill a. Jig saw b. Hand drill b. Reciprocating saw c. Power drill c. Circular saw d. Impact drill d. Plunge saw 3. Identify the tool in the image. 4. Identify the tool in the image. a. Power drill a. Power drill b. Hammer drill b. Hammer drill c. Masonry drill c. Hand drill d. Lock drill d. Impact drill 5. Identify the tool in the image. 6. Identify the tool in the image. a. Auger drill bit b. Drill bit c. Spade drill bit d. Twist drill bit a. Grinder b. Cut off saw c. Hand grinder d. Rotating saw 7. Identify the tool in the image. 8. Identify the tool in the image. a. Hand saw a. Applying gun b. Chop saw b. Power mixer c. Skill saw c. Corded drill d. Circular saw d. Paint sprayer 9. When cutting an angle on a long rafter what saw 10. When using a table saw or jointer it is is generally used by house framers? recommended to use a push stick for what a. Circular saw reason? b. Band saw a. To add additional pressure to the material c. Cross cut saw b. Avoid having your fingers near the blade d. Table saw c. It is the only way the tool works d. Prevents kickback 11. When using a sander that sands in a back and 12. What term is used when a saw has more torque forth motion you would be using a that a standard saw? sander.
    [Show full text]
  • Shaper Cutter Heads That Accept Corrugated Molding Knives (Of Course, We Offer These Heads As Well)
    Welcome to My Wood Cutters At "My Wood Cutters", you can find pretty much all common cutting tools for woodworkers. This includes all kinds of saw blades, replacement knives for planers and jointers, The Magic Molder, router bits, shaper cutters, drill bits, SHELIX-helical cutter heads for planers and jointers, and even molding knives for all common molding machines as well as for special shaper cutter heads that accept corrugated molding knives (of course, we offer these heads as well) While we strive to offer you some of the best prices on the Market, we specialize in high quality products only. For this very reason, you will find our products well-priced, affordable, or competitive, but we do not like to use the term “cheap”. In our opinion, if something is being sold “cheap”, it usually is a “cheap” product or simply “You get what you pay for”. If you ever have the feeling you just “got what you paid for” and not the long lasting high quality product you expected, please inform us immediately and we will investigate the appropriate product and if we agree with you, remove it from our inventory and offer you a full refund! 1,060+ catalog moulding knives, Custom Moulding Knives, SHELIX Helical Cutterheads for 500+ Planers, Jointers, Shapers, and Moulders 670+ Shaper Cutter Heads and Shaper Accessories 170+ Sets of Replacement Knives for Planers and Jointers The Magic Molder 380+ Saw Blades, Dado Sets, Scoring Blades and Accessories, and 840+ Router Bits and Router Accessories and more! Molding Knives Molding Knives for most common molding machines and shaper cutter heads.
    [Show full text]
  • $250.00 $275.00
    Sydney: (02) 9890 9111 Brisbane: (07) 3274 4222 Melbourne: (03) 9212 4422 Perth: (08) 9373 9999 [email protected] www.machineryhouse.com.au Order Code: W874 cs-55 - Circular Plunge & Mitre Cut Saw - Package (240V) 55mm Depth Capacity Ø160mm Blade On Special ex GST inc GST $339.00 $372.90 $250.00 $275.00 Package Contains: EX GST INC GST 1 x W875 cs-55 Circular Plunge & Mitre Cut Saw $220.00 $242.00 1 x W876 cs55-RAIL Aluminium Guide Rail $85.00 $93.50 1 x W877 Guide Joiner, Clamps & Stop Accessory Kit $25.00 $27.50 1 x W878 Accessory Anti-Fall Over Saw Clamp $9.00 $9.90 Normal Price: $339.00 $372.90 Package Price: $250.00 $275.00 SAVE: $89.00 $97.90 ORDER CODE W874 Model cs-55 Package Type Circular Plunge Saw Kit Blade Diameter x Teeth Ø160mm x 24T Blade Thickness 2.4mm Blade Bore 20mm Blade Speed 5500rpm Cut Depth @ 90º - Plunge Saw only 55mm Cut Depth @ 45º - Plunge Saw only 41mm Cut Depth @ 90º - with Guide Rail 50.5mm Cut Depth @ 45º - with Guide Rail 35.5mm Mitre Cutting 0 - 45º Closest to Wall Cutting 15.5mm Dust Collector Connection Size 38mm Voltage 240V Motor Power 1.2kW / 1.6hp Shipping Dimensions (L x W x H) 1430 x 240 x 270mm Weight (Nett) 9.5kg Description The Scheppach circular plunge cut saw cs-55 – "Three Saws in One" can be used as a plunge saw, Portable hand saw & a Panel sizing saw, anyone can get great results in the shop or on the job site.
    [Show full text]