DOCSLIB.ORG

CADD Manual in Reference to the FDOT Design Manual (FDM)

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
CADD Manual in Reference to the FDOT Design Manual (FDM) State of Florida Department of Transportation CADD Manual In reference to the FDOT Design Manual (FDM) TOPIC NUMBER: 625-050-001 Publish Date: January 27, 2020 PRODUCTION SUPPORT CADD OFFICE TALLAHASSEE, FLORIDA http://www.fdot.gov/cadd/ [THIS PAGE INTENTIONALLY LEFT BLANK] Contents INTRODUCTION ..................................................................................................................... 1-1 1.1 PURPOSE.......................................................................................................................................................... 1-1 1.2 AUTHORITY ...................................................................................................................................................... 1-1 1.3 REFERENCES .................................................................................................................................................... 1-1 1.4 DEFINITIONS .................................................................................................................................................... 1-2 1.5 SCOPE .............................................................................................................................................................. 1-7 1.6 ORGANIZATION ............................................................................................................................................... 1-7 1.7 ROLES AND RESPONSIBILITIES ......................................................................................................................... 1-8 CADD Office .............................................................................................................................................. 1-8 CADD Managers ....................................................................................................................................... 1-8 CADD Technical Advisory Committees (TACs) .......................................................................................... 1-8 1.8 DISTRIBUTION.................................................................................................................................................. 1-8 1.9 TRAINING ......................................................................................................................................................... 1-8 1.10 LINKS AND FORMS ......................................................................................................................................... 1-9 CADD Quick Links ................................................................................................................................... 1-9 Forms ................................................................................................................................................... 1-10 1.10.2.1 Suggestions, Comments, or Questions for the CADD Manual ............................................................................. 1-10 1.10.2.2 Compliance Certification Checklist ......................................................................................................................... 1-13 CADD COMPUTER SYSTEMS .................................................................................................... 2-1 2.1 PURPOSE.......................................................................................................................................................... 2-1 2.2 SCOPE .............................................................................................................................................................. 2-1 2.3 PROCUREMENT OF CADD HARDWARE AND SOFTWARE ................................................................................. 2-1 2.4 MINIMUM SYSTEM REQUIREMENTS ............................................................................................................... 2-1 Optimal CADD Hardware/Software Requirements .................................................................................. 2-1 CADD SOFTWARE, DEVELOPMENT AND DISTRIBUTION .............................................................. 3-1 3.1 PURPOSE.......................................................................................................................................................... 3-1 3.2 SCOPE .............................................................................................................................................................. 3-1 3.3 SUPPORTED CADD PLATFORMS ....................................................................................................................... 3-1 3.4 CADD SOFTWARE DEVELOPMENT ................................................................................................................... 3-1 3.5 CADD SOFTWARE UPDATES ............................................................................................................................. 3-2 CADD Software Testing ............................................................................................................................ 3-2 CADD Software Release Notifications ...................................................................................................... 3-2 CADD Software Release Distribution........................................................................................................ 3-2 CADD SUPPORT ..................................................................................................................... 4-1 4.1 PURPOSE.......................................................................................................................................................... 4-1 4.2 SCOPE .............................................................................................................................................................. 4-1 4.3 OVERVIEW ....................................................................................................................................................... 4-1 4.4 SYSTEM SUPPORT ............................................................................................................................................ 4-2 4.5 OPERATIONAL SUPPORT .................................................................................................................................. 4-2 4.6 TRAINING SUPPORT ......................................................................................................................................... 4-3 4.7 REPORTING OF CADD ISSUES ........................................................................................................................... 4-4 CADD STANDARDS ................................................................................................................. 5-1 5.1 PURPOSE.......................................................................................................................................................... 5-1 5.2 SCOPE .............................................................................................................................................................. 5-1 5.3 GENERAL .......................................................................................................................................................... 5-1 5.4 DATABASE (DDB) RESOURCES.......................................................................................................................... 5-2 MicroStation V8i (FDOTSS4, FDOTSS10) .................................................................................................. 5-2 MicroStation Connect Edition (FDOTConnect) ......................................................................................... 5-2 i AutoCAD (FDOT2019.C3D, FDOT2020.C3D) ............................................................................................. 5-2 5.5 SEED/SHEET TEMPLATE FILES .......................................................................................................................... 5-3 MicroStation V8i Seed Files (FDOTSS4, FDOTSS10) .................................................................................. 5-3 MicroStation Connect Edition Seed Files (FDOTConnect) ......................................................................... 5-3 AutoCAD Sheet Template Files (FDOT2019.C3D, FDOT2020.C3D) ........................................................... 5-4 5.6 DESIGN LIBRARIES/TEMPLATES ....................................................................................................................... 5-5 MicroStation V8i Design Libraries (FDOTSS4, FDOTSS10) ........................................................................ 5-5 MicroStation Connect Edition Design Libraries (FDOTConnect) ............................................................... 5-6 AutoCAD Design Template Files (FDOT2019.C3D, FDOT2020.C3D) ......................................................... 5-7 5.7 DESIGN FILENAMES ......................................................................................................................................... 5-8 Design File Naming Convention ............................................................................................................... 5-8 5.7.1.1 Structures Design File Naming Convention.............................................................................................................. 5-10 5.7.1.2 Architectural Design Naming Convention ...............................................................................................................
Load more

Recommended publications
  • Download CMS Intellicad® Brochure
    CMS IntelliCAD® Premium Edition (PE) & Premium Edition Plus (PE Plus) CAD Software Affordable, Powerful & Compatible Key Points CMS IntelliCAD® Compatible CAD Software is the Unrivaled Autodesk® AutoCAD® Compatibility intelligent and affordable full-featured choice for Native .dwg file support, including version 2.5- 2018/20 engineers, architects and consultants, or anyone who Add Digital signaturesNEW to .dwg files. communicates using CAD drawings. AutoCAD 3D surface commands. CMS IntelliCAD is designed to give you unrivaled Spatial® ACIS (.sat) 3D solids import and export*. compatibility with Autodesk® AutoCAD®, and is fully ACIS 3D solids modeling*. programmable with hundreds of third party solutions. Autodesk Development System (ADS) unicode support. CMS IntelliCAD also offers a full suite of 2D and 3D LISP support (including .DCL). AutoCAD compatible drawing tools. CMS IntelliCAD also Support for AutoCAD command line. provides a high degree of compatibility with the AutoCAD Digitizer Support. command set, as well as AutoLISP and ADS and built-in AutoCAD menu (.MNU) and script (.SCR) files. Microsoft VBA. Raster image display. You can get to work immediately using your *.dwg files, commands and applications you rely on. Exceptional Productivity & Customization Photo-realistic 3-D rendering, Visual Styles & Materials. What's new on v10.0 Advanced photo-realistic rendering with Artisan render. Ribbon tabs interface combined with Menus & Toolbars. CMS IntelliCAD® 10 CAD Software is a major release CUI support for Ribbon tabs interface customization. providing new features and improvements , now also ActiveX support including in-place editing. provided as Perpetual Standalone and Network versions. Drawing Explorer™ for managing layers, blocks, line types, and Free 15 days trial available.
    [Show full text]
  • The Leader in Advanced .Dwg Technology
    October 17 2017 TEIGHA® DRAWINGS The leader in advanced .dwg technology www.opendesign.com Copyright © 2017 Open Design Alliance, All Rights Reserved BACKGROUND Teigha Drawings is a stand-alone independent SDK available for developers working with the .dwg, .dxf, and .dgn file formats. It was developed by Open Design Alliance (ODA), a technology consortium that has been providing interoperability tools for the engineering software industry since 1998. BUSINESS OVERVIEW INTRODUCTION ODA has a long history of experience with the .dwg file format, dating back to 1998. Our software has kept the .dwg file format open and universally accessible for the past 20 years. Today, in addition to providing interopera- bility, we are leveraging our vast experience with .dwg to make it a tool of choice for modern application development. INDUSTRY-PROVEN TECHNOLOGY Teigha Drawings has been powering thousands of mission critical engi- neering applications for more than a decade. It is a mature, high-quality and trusted solution for building CAD applications. ACCELERATE TIME-TO-MARKET In addition to turn-key support for .dwg and .dgn files, Teigha Drawings includes components for a variety of other common engineering tasks including version control, visualization and publishing. Using Teigha Drawings as a base, you can build more sophisticated applications in less time, using fewer resources. ATTRACTIVE LICENSING Teigha Drawings is offered under a fixed fee license with no royalties for cost-effective deployment. PRODUCT PORTFOLIO SUPPORTED FILE VERSIONS .dwg/.dxf
    [Show full text]
  • The Fondation Louis Vuitton
    THE FONDATION LOUIS VUITTON A new ambition for LVMH's corporate patronage Created by the LVMH group and its Maisons in 2006 on the initiative of Bernard Arnault, the Fondation Louis Vuitton forms part of the art and culture patronage programme developed by the group for over twenty years. It also marks a new step driven by a renewed ambition: – A lasting commitment with the desire to become firmly rooted in a particular place and bring an institution to life over the long term. – A major philanthropic gesture towards the city of Paris with the construction of an exceptional building on municipal state property and the signature of a 55-year occupancy agreement with Paris city council. Driven by a desire to work for the common good, the Fondation Louis Vuitton demonstrates a clear commitment to contemporary art and looks to make it accessible to as many people as possible. To foster the creation of contemporary art on a national and international scale, the Fondation Louis Vuitton calls on a permanent collection, commissions from artists, temporary modern and contemporary art exhibitions and multidisciplinary events. One of its priorities is to fulfil an educational role, especially among the young. A new monument for Paris Frank Gehry has designed a building that, through its strength and singularity, represents the first artistic step on the part of the Fondation Louis Vuitton. This large vessel covered in twelve glass sails, situated in the Bois de Boulogne, on the edge of avenue du Mahatma Gandhi, is attached to the Jardin d'Acclimatation. Set on a water garden created for the occasion, the building blends into the natural environment, amidst the wood and the garden, playing with light and mirror effects.
    [Show full text]
  • Welcome to the Bricsys Newsletter
    Bricsys Newsletter Q1 - 2013 Welcome to the Bricsys Newsletter Our goal is to make this a quarterly newsletter The road to BIM: Bricsys is committed to explore the limits of Bricsys Strategy for Mechanical Design: Bricsys’ answers to the to provide you with what can be done for BIM within the familiar dwg environment. different MCAD challenges with 3D direct modeling in BricsCAD. interesting news about the CAD market in general as well as the BricsCAD platform and the solutions from our Third Party development partners. The Bricsys Team The BricsCAD re-branding Artisan for BricsCAD, 2012 International The World’s Oldest CAD and miscellaneous creating realistic images Conference summarized by Operator uses BricsCAD. click to © 2013 by Bricsys updates. from BricsCAD models. the CAD analyst community. navigate ! Bricsys Newsletter AECQ1 CORNER - 2013 The road to BIM By Erik de Keyser Over the last several years Bricsys evolved from an alternative CAD provider In a BIM all AEC disciplines add their specific info to the model in order to: to a leader in bringing about the next generation dwg environment unifying deliver a digital representation of the complete building as conceived, 2D drawing and 3D direct modeling. While there still are many challenges including all the technical disciplines needed for making the building ahead on the road to deliver top-notch solutions for the mechanical market, operational when physically constructed (design phase) we are now ready for our next challenge in the AEC space. hand-over this digital information to the contractors for construction of Several of us at Bricsys have been involved with BIM in the past, developing the building, add information about modifications along the construction TriForma for MicroStation in the 90s and Architecturals for the dwg space in process and make the BIM “As Build” (construction phase) the 00s.
    [Show full text]
  • Bricscad® V15 for Autocad® Users
    BRICSCAD® V15 FOR AUTOCAD® USERS Ralph Grabowski BRICSYS Payment Information This book is covered by copyright. As the owner of the copyright, upFront.eZine Publishing, Ltd. gives you permission to make one print copy. You may not make any electronic copies, and you may not claim authorship or ownership of the text or figures herein. By Email Acrobat PDF format: $19.60 Allow for a 17MB download. PayPal Check or Money Order To pay by PayPal, send payment to the account We can accept checks from the following of [email protected] at www.paypal.com. regions of the world: • US funds drawn on a bank with address in the USA. PayPal accepts funds in US, Euro, Yen, • Canadian funds drawn on a bank with a Canadian Canadian, and 100+ other currencies. address (includes GST). • British funds drawn on a bank in Great Britain. • Euro funds drawn on a bank located in the EU. Make cheque payable to ‘upFront.eZine Publishing’ Please mail your payment to: “BricsCAD for AutoCAD Users” upFront.eZine Publishing, Ltd. 34486 Donlyn Avenue Abbotsford BC V2S 4W7 Canada Visit the BricsCAD for AutoCAD Users Web site at www.upfrontezine.com/b4a. At this Web page, editions of this book are available for BricsCAD V8 through V14. Purchasing an ebook published by upFront.eZine Publishing, Ltd. entitles you to receive the upFront.eZine newsletter weekly. To subscribe to this “The Business of CAD” newsletter separately, send an email to [email protected]. Copyright Information Copyright © 2014 by upFront.eZine Publishing, Ltd. All rights reserved worldwide. Seventh edition based on BricsCAD V15 23 November 2014 Technical Writer Ralph Grabowski All brand names and product names mentioned in This book is sold as is, without warranty of any kind, either this book are trademarks or service marks of their express or implied, respecting the contents of this book and respective companies.
    [Show full text]
  • Important Notes for DWG to DGN Conversions
    Important notes for DWG to DGN conversions Some issues/differences in the functionality of AutoCAD and MicroStation will present issues with the drawing conversions that could either not be resolved programmatically, or have been deemed too difficult/time consuming to resolve for the LaDOTD environment. Some of these issues are outlined below: Cells / Blocks The blocks used in the DWG block libraries were created by converting the LaDOTD MicroStation cell library files. Data Fields are used in a number of the MicroStation cells (e.g. title blocks); however there is no direct equivalent for Data Fields in AutoCAD. There is currently no workflow equivalent for this for using AutoCAD with LaDOTD projects so any required Data Field information will need to be entered after the files are converted to MicroStation. If you are not using the Altiva supplied MVBA to convert the DWG files to DGN (see the convert section below) you should check the filter settings for the file conversions. You will need to uncheck the Shared Cells flag in the remapping filter so that the Shared Cells from AutoCAD will change to normal cells in MicroStation. LIN file / RSC symbology The LaDOTD linestyles used for AutoCAD have an “-AC” suffix on their names. This is to help with conversions to MicroStation DGN format. Without the rename, MicroStation would simply load the LIN file version of these line styles and no conversion would occur. In order to force the conversion back to the RSC version of the line style, different names for line styles are required. This is not the case going from DGN to DWG as the LIN file is defined in the mapping translation file.
    [Show full text]
  • Openscad User Manual (PDF)
    OpenSCAD User Manual Contents 1 Introduction 1.1 Additional Resources 1.2 History 2 The OpenSCAD User Manual 3 The OpenSCAD Language Reference 4 Work in progress 5 Contents 6 Chapter 1 -- First Steps 6.1 Compiling and rendering our first model 6.2 See also 6.3 See also 6.3.1 There is no semicolon following the translate command 6.3.2 See Also 6.3.3 See Also 6.4 CGAL surfaces 6.5 CGAL grid only 6.6 The OpenCSG view 6.7 The Thrown Together View 6.8 See also 6.9 References 7 Chapter 2 -- The OpenSCAD User Interface 7.1 User Interface 7.1.1 Viewing area 7.1.2 Console window 7.1.3 Text editor 7.2 Interactive modification of the numerical value 7.3 View navigation 7.4 View setup 7.4.1 Render modes 7.4.1.1 OpenCSG (F9) 7.4.1.1.1 Implementation Details 7.4.1.2 CGAL (Surfaces and Grid, F10 and F11) 7.4.1.2.1 Implementation Details 7.4.2 View options 7.4.2.1 Show Edges (Ctrl+1) 7.4.2.2 Show Axes (Ctrl+2) 7.4.2.3 Show Crosshairs (Ctrl+3) 7.4.3 Animation 7.4.4 View alignment 7.5 Dodecahedron 7.6 Icosahedron 7.7 Half-pyramid 7.8 Bounding Box 7.9 Linear Extrude extended use examples 7.9.1 Linear Extrude with Scale as an interpolated function 7.9.2 Linear Extrude with Twist as an interpolated function 7.9.3 Linear Extrude with Twist and Scale as interpolated functions 7.10 Rocket 7.11 Horns 7.12 Strandbeest 7.13 Previous 7.14 Next 7.14.1 Command line usage 7.14.2 Export options 7.14.2.1 Camera and image output 7.14.3 Constants 7.14.4 Command to build required files 7.14.5 Processing all .scad files in a folder 7.14.6 Makefile example 7.14.6.1 Automatic
    [Show full text]
  • Gestión De Proyectos De Instalaciones De Telecomunicaciones
    2b Elaboración de planos y esquemas LibreCAD GESTIÓN DE PROYECTOS Módulo: DE INSTALACIONES DE TELECOMUNICACIONES SISTEMAS DE TELECOMUNICACIONES Ciclo: E INFORMÁTICOS Resultados de aprendizaje: RA2: Elabora planos y esquemas de instalaciones de telecomunicaciones, dando respuesta a la configuración de las instalaciones y manejando programas informáticos de aplicación. Actividades prácticas y ejercicios: Los contenidos se complementarán con ejercicios y actividades prácticas para desarrollar las competencias profesionales. Se desarrollaran según las indicaciones del profesor y/o las recogidas en los guiones de prácticas. Se prestará especial atención a su realización, su documentación y se respetará los plazos de entrega. Se realizarán una serie de actividades en formato CAD utilizando el software de diseño vectorial “LibreCAD”. Equipo de clase: Se asistirá con el material necesario para tomar notas y apuntes en clase. Se recomienda el uso de una memoria usb personal para los archivos de prácticas, etc… ya que los equipos informáticos son compartidos y no se garantiza la integridad de los archivos guardados. Bibliografía y material para ampliar conocimientos: o Software libre LibreCAD. Descarga para instalar en: http://librecad.org o Manual de Qcad. Disponible en: http://www.ribbonsoft.com Existe además en Internet abundante información y cursos relacionados de nivel básico y avanzado en CAD, tanto en 2D como 3D. Conocimientos previos: Conceptos básicos de dibujo técnico. Los impartidos en los otros módulos, en especial sobre las instalaciones de telecomunicaciones. 0 CONTENIDOS 0 Contenidos ..................................................................................................................... 3 1 Imágenes Vectoriales versus Mapas de Bits ................................................................. 4 1.1 Software de Diseño asistido por ordenador (CAD) .................................................... 5 1.2 Software de CAD de mayor difusión .........................................................................
    [Show full text]
  • Openscad User Manual/Print Version Table of Contents Introduction First
    OpenSCAD User Manual/Print version Table of Contents 1. Introduction 2. First Steps 3. The OpenSCAD User Interface 4. The OpenSCAD Language 1. General 2. Mathematical Operators 3. Mathematical Functions 4. String Functions 5. Primitive Solids 6. Transformations 7. Conditional and Iterator Functions 8. CSG Modelling 9. Modifier Characters 10. Modules 11. Include Statement 12. Other Language Feature 5. Using the 2D Subsystem 1. 2D Primitives 2. 3D to 2D Projection 3. 2D to 2D Extrusion 4. DXF Extrusion 5. Other 2D formats 6. STL Import and Export 1. STL Import 2. STL Export 7. Commented Example Projects 8. Using OpenSCAD in a command line environment 9. Building OpenSCAD from Sources 1. Building on Linux/UNIX 2. Cross-compiling for Windows on Linux or Mac OS X 3. Building on Windows 4. Building on Mac OS X 10. Libraries 11. Glossary 12. Index Introduction OpenSCAD is a software for creating solid 3D CAD objects. It is free software (http://www.gnu.org/philosophy/free-sw.html) and available for GNU/Linux (http://www.gnu.org/) , MS Windows and Apple OS X. Unlike most free software for creating 3D models (such as the well-known application Blender (http://www.blender.org/) ), OpenSCAD does not focus on the artistic aspects of 3D modelling, but instead focuses on the CAD aspects. So it might be the application you are looking for when you are planning to create 3D models of machine parts, but probably is not what you are looking for when you are more interested in creating computer- animated movies. OpenSCAD is not an interactive modeller.
    [Show full text]
  • Turbocad Pro 17 Autocad 2010 Comparisons-03-23
    T ur b T oCA ur A b u oCA D toC P TurboCAD vs. AutoCAD ro AD D Comparative Matrix P Pla 20 ro ti 1 1 n 0 7 um 1 7 Suggested Retail Price $1,295 $1,495 $3,995 U SABILITY & INTERFACE Command Line Fully Customizable User Interface and Preferences Advanced Handle-Based Editing Drawing Performance - (TurboCAD includes Redway3d drawing engine) Draw Order by Layer Explode Viewports Layer Filters SNAP Prioritization True Units Retained between Drawings with Different Unit Settings Drawing Compare (1) 2D Drafting and Editing Auto Tools (for Scaling, Sizing, Positioning, Rotating, and Movement) 2D Drawing, Editing, and Modifying Bezier Curves Transparent and Bitmap Fills CTB Print Style Support Drafting and Detailing Palette - create associative sections and cut planes Index Color Support Layer Properties Manager Smart and Quick Dimension Tools Xclip Support 3D Modeling 3D Solid Modeling and Editing 3D Terrain Modeling 3D Shelling, Lofting and Surfaces 3D Deformable Modeling 3D Pattern Copy Tools Quick Pull Tool Parametric Part Maker and Manager History Tree with Editor Mechanical 2D Geometric and Dimension Constraints Adhesive Symbol Tool (fully parametric) Branched Lofting Face-to-Face Lofting Gear Contour Tool Geometric Tolerance Tool Surface Roughness and Weld Symbols Page 1 of 2 T ur b T oCA ur A b u oCA D toC P TurboCAD vs. AutoCAD ro AD D Comparative Matrix P Pla 20 ro ti 1 1 n 0 7 um 1 7 Architectural Intelligent (Parametric) Attribute-rich, Architectural Objects (2) Walls (Self-Healing;
    [Show full text]
  • Choosing the Right HP Z Workstation Our Commitment to Compatibility
    Data sheet Choosing the right HP Z Workstation Our commitment to compatibility HP Z WorkstationsPhoto help caption. you handle the most complex data, designs, 3D models, analysis, and information; but we don’t stop at the hardware—we know that leading the industry requires the best in application performance, reliability, and stability. Software certification ensures that HP’s workstation hardware solution is compatible with the software products that will run on it. We work closely with our ISVs from the beginning – both in the development of new hardware and in the design of new software or a software revision. This commitment to partnership results in a fully certified HP Workstation ISV solution, and ensures a wholly compatible experience between hardware and software that is stable and designed to perform. In this document, HP Z Workstation experts identify the workstations recommended to run industry specific applications. While many configurations are certified for each application, our reccomendations are based on industry trends, typical industry data set sizes, price point, and other factors. Table of contents Architecture, Engineering, and Construction ..................................................................................................................... 2 Education .................................................................................................................................................................................. 3 Geospatial ................................................................................................................................................................................
    [Show full text]
  • The Role of Openbim® in Better Data Exchange for AEC Project Teams the ROLE of OPENBIM® in BETTER DATA EXCHANGE for AEC PROJECT TEAMS 2
    The role of openBIM® in better data exchange for AEC project teams THE ROLE OF OPENBIM® IN BETTER DATA EXCHANGE FOR AEC PROJECT TEAMS 2 Introduction Project Data File type Architectural Model RVT, RFA, SKP, 3ds The success of complex, multi-stakeholder Architecture, Engineering and Construction (AEC) projects relies on smooth Structural Model IFC, CIS/2, RVT collaboration and information sharing throughout the project lifecycle, often across different disciplines and software. The costs 3D Printing STL, OBJ of inadequate interoperability to project teams, according to one analysis of capital facilities projects in the United States, approaches CAD Data DXF, DWG, ACIS SAT 17 billion annually, affecting all project stakeholders.¹ A more recent GIS Data SHP, KMZ, WFS, GML study by FMI and Autodesk’s portfolio company Plangrid found that 52% of rework could be prevented by better data and communication, and that Civil Engineering LandXML, DWG, DGN, CityGML in an average week, construction employees spend 14 hours (around 35% of their time) looking for project data, dealing with rework and/or handling Cost Estimating XLSX, ODBC conflict resolution.² Visualisation Models FBX, SKP, NWD, RVT In the AEC industry, many hands and many tools bring building and infrastructure projects to realisation. Across architects, engineers, contractors, fabricators and Handover to Facilities Management COBie, IFC, XLSX facility managers: inadequate interoperability leads to delays and rework, with ramifications that can reverberate throughout the entirety of the project lifecycle. Scheduling Data P3, MPP Over the last two decades, a strong point of alignment in the AEC industry has been in the development and adoption of the openBIM® collaborative process Energy Analysis IFC, gbXML to improve interoperability and collaboration for building and infrastructure projects.
    [Show full text]