The Williamson Amplifier

Total Page:16

File Type:pdf, Size:1020Kb

The Williamson Amplifier Web: http://www.pearl-hifi.com 86008, 2106 33 Ave. SW, Calgary, AB; CAN T2T 1Z6 E-mail: [email protected] Ph: +.1.403.244.4434 Fx: +.1.403.245.4456 Inc. Perkins Electro-Acoustic Research Lab, Inc. ❦ Engineering and Intuition Serving the Soul of Music Please note that the links in the PEARL logotype above are “live” and can be used to direct your web browser to our site or to open an e-mail message window addressed to ourselves. To view our item listings on eBay, click here. To see the feedback we have left for our customers, click here. This document has been prepared as a public service . Any and all trademarks and logotypes used herein are the property of their owners. It is our intent to provide this document in accordance with the stipulations with respect to “fair use” as delineated in Copyrights - Chapter 1: Subject Matter and Scope of Copyright; Sec. 107. Limitations on exclusive rights: Fair Use. Public access to copy of this document is provided on the website of Cornell Law School at http://www4.law.cornell.edu/uscode/17/107.html and is here reproduced below: Sec. 107. - Limitations on exclusive rights: Fair Use Notwithstanding the provisions of sections 106 and 106A, the fair use of a copyrighted work, includ- ing such use by reproduction in copies or phono records or by any other means specified by that section, for purposes such as criticism, comment, news reporting, teaching (including multiple copies for class- room use), scholarship, or research, is not an infringement of copyright. In determining whether the use made of a work in any particular case is a fair use the factors to be considered shall include: 1 - the purpose and character of the use, including whether such use is of a commercial nature or is for nonprofit educational purposes; 2 - the nature of the copyrighted work; 3 - the amount and substantiality of the portion used in relation to the copy- righted work as a whole; and 4 - the effect of the use upon the potential market for or value of the copy- righted work. The fact that a work is unpublished shall not itself bar a finding of fair use if such finding is made upon consideration of all the above factors ♦ PDF Cover Page ♦ ♦ Verso Filler Page ♦ SECOND EDITION Three ShUnnp • Sixpence Net • �- - ' --.... - '.'- "" Tronsfor ers ond Chokes for the WILLIAMSON AMPLIFIER NATIONAL PHYSICAL LABORATORY REPORT ON TESTS OF TRANSFORMER (Marked: Lab: O tp t, Series Il) u u Tested for: Vortexion Ltd., 257/263 The Broadway, London, S.W.19. , The series resistance and inductance of the primary The series resistance and inductance ofthe primary ,I winding with the secondary winding opcn-circuitcd, winding with the secondary winding short-circuited, was measured at 50 cycles per second with and 20 and of half the primary winding with the oilier volts applied. The room temperature was5 short-circuited were measured at 1,000 cycles halfper The results are given in Table 1. l<'°C. second. About 10 volts were applied. The results are given in Table IL TABLE I TABLE 11 Primary Resistance and Inductance at 50 c/s Resistance and Inductance at 1,000 c/s Voltage Resistance (0.) Inductance (H) Connections Resistance (0.) Inductance (lnH) 1'Ii':�;r�h,,!:�'<In'I' 5 4700 95 K�1I !'rin... ",_ K�U 495 5.3 2. J'ri,,,,,,y .homed. 7900 142 222 5.5 Date .. 2nd JUlIt, 1951. Reference .. E.475.100. This Laboratory Model Transformer Series easily permits 11 6 db more feedback with complete stability than the maximum of our Series 1 which Mr. D. T. N. Williamson described. PRICES Series Output Transformers as above ... Il £7. 7.0 Series Output Transformers I £6. 6.0 Mains Transformers ... £4. 4.0 CHOKES 1O.12H, 150 mA ... ll. £1. 6 CHOKES 30/H, 2e mA £2. 0. 6 Please write for Catalogue WAj5 VORTEXION IJ T I) . 257·263, THEBROADWIIY,WIMBLEDON, LONDON, S.W.l9 Tllepbones: LIBut, 2814 and 6242-3 TdelJ'aml: "VORTEXION. WIlIIIBLE. LONDON' POTTED COMPOUND FILLED TRANSFORMERS & CHOKES WODEN Potted components are in constant demand for the WILLlAMSON AMPLIFIER AND PRE-AMPLlFIER_ note the advantoges Made to the author's exact specification. • Smart appearance and uniform layout . • Absolute Reliability. • SEND FOR FURTHER PARTICULARS AND COMPLETE CATALOGUE. WODEN TRANSFORMER [0· LID I\IIOXLEf ROIlO BIlSTO� STJ\JJS PHONE: BllS TO N 41959 J.T.l. 6 The journal for all radio technicians WIRELESS WORLD is Britain's leading technical journal devoted to radio, television anj electronics - its pages providing a complete and accurate survey of the newest British techniques in design and manufacture. Articles of a high standard cover every phase of radio and allied technical practice, well as the wider aspects of international 3S radio. Theoretical articles by recognized experts deal with new developments, while design data and circuits for every application arc published regularly. Monthly, 25. Annual Subscription, £1 75. Order a regular copy DJ WIRELESS WORLD from your newsagent-to-day. The journal for all advanced workers WIRELESS ENGINEER - produced for research engineers, designers and students in radio, television and electronics - is the international source of information for advanced workers; the journal publishes only original work. It IS served by an Editorial Advisory Board romposed of representatives from the National Physical Laboratory and the British Post Office, and publishes Abstracts and References compiled by the Radio Research Organiza­ tion of the Department of Scientific and l:1dustrial Research. Monthly, 3s. 6d. Annual Subscription, £2 4�. 6d. Your newsagent ,oi/l be glad to supply regular a copy of WIRELESS ENGINEER. See him to-day! ILlFFE & SONS LTD., DORSET HOUSE, STAMFORD ST., LONDON, S.E.l The Williamson Amplifier A Collection of Articles, reprinted frolll "Wireless World," 011 "Design for a High-quality Amplifier" By D_ T_ N. WILLIAMSON (formerly of the M.O. Val"c: Company, now with Ferranti Research Laboratories) Published for • LONDON: ILIFFE & SONS, LTD. The W iIIiamson Amplifier CONTENTS Page Introduction 5 Basic Requirements: 7 Alternative Specifications (April 1947) Details of Chosen Circuit and Its Performance 11 (May 1947) NEW VERSION Design Data: 14 Modifications: Further Notes (August 1949) Design of Tone Controls and Auxiliary Gramophone Circuits 20 (Octoberand November1949) Design for a Radio Feeder Unit 30 (December 1949) Replies to Queries Raised by Constructors 34 (January 1950) Modificationsfor High-impedance Pickups and Long-playing Records 35 (May 1952) 3 Introduction Introduced by Wireless World in '947 as merely onc of a series of amplifier designs, the .. Williamson .. has for several years been widely accepted as the standard of design and performance wherever amplifiers and sound reproduction arc discussed. Descriptions of it have been published in all the principal countries of the world, and so there are reasonable grounds for assuming that its widespread reputation is based solely on its qualities. This hooklet includes all the articles written by D. T. N. Williamson on the amplifier. Both the 1947 and 1949 versions are reprinted. as the alternative output transformer ratios cover a wide range of require­ ments. Modifications and additions include pee-amplifier circuits and an d. unit. with recently published information 011 adaptation bigb­ to impedance pickups and correction for 331 r.p.m. records. We would stress the importance, if the full potentialities of Hle amplifier are to be realized, of following the author's recommendations in detail. Even the .S.A., where several modified versions have in U been descri d, many users adhere to the designer's exact specification be with the original valve types. It is not the circuit alone, but the properties of the valves and such components the output tnlnsfonner, as together with the welding of theory and practice into a rational layout, which produce the results. Editor, Wireless World. , .' ♦ Verso Filler Page ♦ The Williamson Amplifier Basic Design Requirements: Alternative Specifications improvements in the operation of the loudspeaker. spectrum (but especially, at the ECENTfield of commercial sound This in turn reconverts the elec· low-frequency end) be substan­ recording ha made prac­ trical waveform into a corres­ tially less than that at medium vc Rticable the reproduction of a ponding sound pressure waveform, frequencies, filters must be wider range of frequencies than which in an ideal system would arranged to reduce the level of hitherto. The useful range of be a replica of the original. these frequcncies be/ore they reach shellac pressings has been ex­ The performance of an amplifier the amplifier as otherwise severe tended from the limited 50-8,000 intended to reproduce a given intermodulation will occur. This c/s which, with certain notable waveform is usually stated in is especially noticeable during the exceptions, has been standard terms of its ability to reproduce reproduction of an organ on from 1930 until the present, to a accurately the frequency com­ incorrectly designed equipment range of some 20-15,000 c/s. This ponents of a mythical Foutier where pelial notes of the order of increase in the frequency range analysis of the waveform. While c / s cause bad distortion, 16-20 has been accompanied by an this method is convenient and even though they may be in­ overall reduction in distortion and indeed corresponds to the manner audible in the sound output. the absence of peaks, and by the in which the mechanism of the (3) Negligible phase shift with­ recording of a larger volume range, car analyses sound pressure wave­ in the audible range. Although which combine to make possible a forms into component frequencies the phase relationship bctweell standard of reproduction not pre­ and thcreby transmits intelligence the componcnt frcquencies of a viously attainable from disc re­ to the brain, the (act that the complex steady-state sound ooes cordings.
Recommended publications
  • Switched-Mode Power Supply - Wikipedia, the Free Encyclopedia
    Switched-mode power supply - Wikipedia, the free encyclopedia Log in / create account Article Discussion Read Edit Switched-mode power supply From Wikipedia, the free encyclopedia For other uses, see Switch (disambiguation). Navigation A switched-mode power supply (switching-mode Main page power supply, SMPS, or simply switcher) is an Contents electronic power supply that incorporates a switching Featured content regulator in order to be highly efficient in the Current events conversion of electrical power. Like other types of Random article power supplies, an SMPS transfers power from a Donate to Wikipedia source like the electrical power grid to a load (e.g., a personal computer) while converting voltage and Interaction current characteristics. An SMPS is usually employed to efficiently provide a regulated output voltage, Help typically at a level different from the input voltage. About Wikipedia Unlike a linear power supply, the pass transistor of a Community portal switching mode supply switches very quickly (typically Recent changes between 50 kHz and 1 MHz) between full-on and full- Interior view of an ATX SMPS: below Contact Wikipedia off states, which minimizes wasted energy. Voltage A: input EMI filtering; A: bridge rectifier; regulation is provided by varying the ratio of on to off B: input filter capacitors; Toolbox time. In contrast, a linear power supply must dissipate Between B and C: primary side heat sink; the excess voltage to regulate the output. This higher C: transformer; What links here Between C and D: secondary side heat sink; efficiency is the chief advantage of a switched-mode Related changes D: output filter coil; power supply.
    [Show full text]
  • Corel DESIGNER
    Mains Harmonics REO (UK) LTD, Units 2 - 4 Callow Hill Road, Craven Arms Business Park, Craven Arms, Shropshire SY7 8NT UK Tel: 01588 673411 Fax: 01588 672718 REO UK LTD Email: sales@ reo.co.uk W ebsite: www.reo.co.uk Contents W hat are mains harmonics? 1 2 Mains harmonics are voltages and/or Harmonics with numbers that are divisible W hat are mains harmonics? currents that occur in an AC mains by three (3rd, 6th, 9th, 12th, 15th, etc.) are 2 electricity power supply at multiples of the called zero sequence harmonics, because nominal mains frequency. 'Even-order' the fields they cause in a three-phase AC harmonic frequencies are those that occur motor are stationary 2 they do not rotate. How do mains harmonics occur? 3 at even-numbered multiples of the Odd-numbered 'zero-sequence' harmonics nominal mains frequency, whereas 'odd- (3rd, 9th, 15th, etc.) are called triplens. order' harmonics occur at odd-numbered W hy are harmonics an increasingly important issue? 7 multiples, as shown in Table 1. Table 1 Some examples of harmonics for four common AC power supply frequencies How mains harmonics cause harm 9 Harmonic Number Even Odd 16.667Hz 50Hz 60Hz 400Hz Order Order Relevant standards and codes on mains harmonics 28 1 (the fundamental 16.667Hz 50Hz 60Hz 400Hz mains frequency) Likely sources of harmonic interference 33 2 33.333 100 120 800 3 50 150 180 1.2kHz The influence of the mains distribution systems impedance 35 4 66.667 200 240 1.6kHz 5 83.333 250 300 2kHz 6 100 300 360 2.4kHz How can harmonics be detected and measured 37 7 116.667 350 420 2.8kHz 8 133.333 400 480 3.2kHz Testing for immunity to harmonically distorted mains supplies 42 9 150 450 540 3.6kHz 10 166.667 500 600 4kHz Prevention and avoidance measures 42 11 183.333 550 660 4.4kHz 12 200 600 720 4.8kHz 13 216.667 650 780 5.2kHz Harmonic mitigation products from REO 61 14 233.333 700 840 5.6kHz 15 250 750 900 6kHz References and further reading 63 ...etc..
    [Show full text]
  • Checking out the Power Supply the Power Supply Must Be Carefully Checked out a Good Many Australian-Made Sets from the Mid 1930S-1950 Era
    Checking out the power supply The power supply must be carefully checked out a good many Australian-made sets from the mid 1930s-1950 era. Fig.1 before switching on a vintage radio. The shows a typical circuit configura- components most likely to be at fault are the tion but there are other variations. electrolytic capacitors, most of which should be For example, some rectifiers re- quire a cathode voltage of 6.3V AC, replaced as a matter of course. not 5V. Similarly, not all radio valves use Although only a few parts are in- (equivalent to 570 volts, centre- 6.3V heater supplies. There are volved, the power supply is a com- tapped). 2.5V valves, 4V valves and 12V mon source of problems in vintage The 5V and 6.3V AC supplies are valves in some late model sets. In radios. It should be carefully check- wired straight from the trans- these radios, the low tension ed out before power is applied, as a former to the filaments and voltages on the transformer will be fault here can quickly cause heaters. However, the high tension different — but that's about all. damage to critical components. supply must be rectified to give a The high tension voltage will still be Most mains-operated valve high-tension DC supply for the well in excess of 250 volts. radios have three separate secon- anodes and screens for the various The output from the rectifier dary windings on the power receiving and output valves. A valve will not be pure DC but does transformer.
    [Show full text]
  • Tube Ultragain T1953
    Users Manual ENGLISH Version 1.2 December 2002 T1953 TUBE ULTRAGAIN TUBE ULTRAGAIN T1953 SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This symbol, wherever it appears, This symbol, wherever it appears, alerts alerts you to the presence of you to important operating and mainte- uninsulated dangerous voltage inside nance instructions in the accompanying the enclosurevoltage that may be literature. Read the manual. sufficient to constitute a risk of shock. DETAILED SAFETY INSTRUCTIONS: All the safety and operation instructions should be read before the appliance is operated. Retain Instructions: The safety and operating instructions should be retained for future reference. Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to. Follow instructions: All operation and user instructions should be followed. Water and Moisture: The appliance should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool etc.). Ventilation: The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings, or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
    [Show full text]
  • Automatic Guitar Tuner Group 1
    University of Central Florida Automatic Guitar Tuner Group 1 Trenton Ahrens, Alex Capo, Ernesto Wong 12-4-2014 EEL4919 Fall 2014 Group 1 - Trenton Ahrens, Alex Capo, Ernesto Wong Table of Contents 1 Executive Summary ....................................................................................... 1 2 Project Description ......................................................................................... 2 2.1 Motivation ................................................................................................ 2 2.2 Objectives ................................................................................................ 3 2.2.1 Tuning Time ...................................................................................... 3 2.2.2 Accuracy ........................................................................................... 3 2.2.3 Convenience ..................................................................................... 4 2.2.4 Budget .............................................................................................. 4 2.2.5 Experience ........................................................................................ 4 2.2.6 Knowledge Gain................................................................................ 4 2.3 Project Requirements and Specifications ................................................ 4 2.3.1 Accuracy ........................................................................................... 5 2.3.2 Tuning Preference ...........................................................................
    [Show full text]
  • Design Approach for a MERUS™ MA12070 Based Musical Instrument Bass Amplifier DEMO BASSAMP 60W MA12070
    AN_2005_PL88_2005_091616 Design approach for a MERUS™ MA12070 based musical instrument bass amplifier DEMO_BASSAMP_60W_MA12070 About this document Scope and purpose This document describes the practical and electrical design of a wall-adapter or battery-powered, 60 W, professionally featured and ultraefficient pocket-sized bass instrument amplifier. It is modeled after classic vacuum-tube bass amplifier topology. It utilizes the exceptional audio quality and best-in-class efficiency of Infineon’s MERUSTM amplifier technology to amplify every nuance of a genuine vacuum-tube pre-amplifier. Intended audience This document is for musical audio amplifier design engineers, audio system engineers and portable audio design engineers. Table of contents About this document ....................................................................................................................... 1 Table of contents ............................................................................................................................ 1 1 Introduction .......................................................................................................................... 2 2 Features and performance ...................................................................................................... 3 3 User interface ........................................................................................................................ 5 4 Amplifier topology ................................................................................................................
    [Show full text]
  • When Was the Last Time You Heard a Perfect Room? Home Theater Acoustical Problems and Equalization Solutions
    ® Technical Paper Number 108 When Was The Last Time You Heard A Perfect Room? Home Theater Acoustical Problems and Equalization Solutions by Frederick J. Ampel All Rights Reserved. Copyright 1995. Frederick J. Ampel is now active in or has been active in almost every aspect of the audio/video industry. He has an MS in Television Sciences with a BA in Music. He is the principal Editorial Consultant with Systems Contractor News and past editor of Sound and Video Contractor magazine. His career includes live sound reinforcement, broadcast production, recording studio design, and home theater system design, installation and equipment development. Price $1.00 ® 22410 70th Avenue West, Mountlake Terrace, WA 98043 (425) 775-8461 ® ® When Was The Last Time You Heard A Perfect Room? Home Theater Acoustical Problems and Equalization Solutions System designers, installers, and consultants face a constant series of problems in delivering the kind of Home Theater performance clients have a right to expect for their money. Each and every room is unique, and each one presents a different blend of physical, and electrical limitations that can make even the most expensive loudspeaker system function well below its potential. One of the most overlooked technologies for correcting, enhancing, and polishing the performance of loudspeaker systems used in multi-channel and distributed whole house audio applications is equalization. No, we are not talking about the ubiquitous, and essentially useless “tone controls” pro- vided on almost every preamplifier/receiver, or similar component. While having some application for the end users to adjust overall system tonality, these limited capability circuits simply cannot provide a sufficient range of control to modify the spectral content of the loudspeaker information presented to the room, and ultimately to the listener(s).
    [Show full text]
  • (12) United States Patent (10) Patent No.: US 8,791,351 B2 Kinman (45) Date of Patent: Jul
    USOO8791351B2 (12) United States Patent (10) Patent No.: US 8,791,351 B2 Kinman (45) Date of Patent: Jul. 29, 2014 (54) MAGNETIC FLUX CONCENTRATOR FOR (56) References Cited INCREASING THE EFFICIENCY OF AN ELECTROMAGNETIC PICKUP U.S. PATENT DOCUMENTS 4,372,186 A 2, 1983 Aaroe ............................. 84,725 (76) Inventor: Christopher Kinman, Auchenflower 5,525,750 A * 6/1996 Beller ............................. 84,726 5,592,037 A * 1/1997 Sickafus ................. 310/40 MM (AU) 5,646,464 A * 7/1997 Sickafus ................. 310/40 MM 7,135,638 B2 * 1 1/2006 Garrett et al. ................... 84,725 7,166,793 B2 * 1/2007 Beller ............................. 84f723 (*) Notice: Subject to any disclaimer, the term of this 7,227,076 B2 * 6/2007 Stich ............................... 84,726 patent is extended or adjusted under 35 7.994,413 B2 * 8/2011 Salo ................................ 84,726 U.S.C. 154(b) by 0 days. 2006/01569 11 A1* 7/2006 Stich ............................... 84,726 2010.0122623 A1* 5, 2010 Salo ................................ 84,726 2012/0103170 A1* 5, 2012 Kinman .......................... 84,726 (21) Appl. No.: 13/282,447 * cited by examiner (22) Filed: Oct. 26, 2011 Primary Examiner — Marlon Fletcher (74) Attorney, Agent, or Firm — Thompson Hine LLP (65) Prior Publication Data (57) ABSTRACT An electromagnetic pickup adapted to be secured to a US 2012/O103170 A1 May 3, 2012 stringed musical instrument, such as a guitar or bass or the like, of the type having a plurality of magnetic strings of ferromagnetic composition Such as Steel tensioned to provide Related U.S. Application Data musical notes under mechanical stimulation Such as picking is disclosed.
    [Show full text]
  • A Simple Ring-Modulator
    A Simple Ring-modulator Hugh Davies MUSICS No.6 February/March 1976 I have lost count of the number of times that I have been asked to write down the basic circuit for a ring-modulator since building my first one early in 1968, when someone else suggested components for the circuit that I had found in two books. Up to now, I have constructed about a dozen ring-modulators, four of which were for my own use (two built in a single box for concerts, one permanently installed with my equipment at home, and one inside a footpedal with a controlling oscillator also included). So it seems to be helpful to make this information more available. The ring modulator (hereafter referred to as RM) was originally developed for telephony applications, at least as early as the 1930s (its history has been very hard to trace), in which field it has subsequently been superseded by other devices. A slightly different form – switching type as opposed to multiplier type – occurs in industrial control applications, such as with servo motors. The RM is closely related to other electronic modulators, such as those for frequency and amplitude modulation (two methods of radio transmission, FM and AM, but now equally well known to musicians in voltage-controlled electronic music synthesizers). Other such devices include phase modulators/phase shifters and pulse-code modulators. All modulators require two inputs, which are generally known as the programme (a complex signal) and the carrier or control signal (a simple signal). In FM and AM broadcasting, for example, the radio programme is modulated (encoded) for transmission by means of a hypersonic carrier wave, and demodulated (decoded) in the receiver.
    [Show full text]
  • Williamson Design Info 29 September 2021
    Page 1 of 30 Williamson Design Info 29 September 2021 This article collates design information on the Contents 1949 ‘new’ Williamson amplifier circuit. By 1. Preamble ................................................................ 1 detailing design considerations of the original circuit, assessment of altered operating 2. Mid-band behaviour ............................................... 2 conditions or part selection or circuit changes 3. Low-frequency behaviour ...................................... 3 can be made. 4. High-frequency behaviour ...................................... 5 A listing and commentary of changes 5. Power Supply ......................................................... 9 proposed over decades by magazine articles 6. Signal stage valve types and bias conditions ...... 12 and manufactured clones is provided. 7. Output stage bias conditions ............................... 16 The aim of this article is not to propose 8. Changes ............................................................... 20 substantial changes to the original circuit, but 9. Setup and Testing ................................................ 27 rather to appreciate the original circuit’s 10. References ....................................................... 29 design outcomes, and why some have made changes to the design over time. 1. Preamble The 1949 Williamson ‘new’ amplifier circuit with 6SN7 and KT66 valves, and Partridge WWFB output transformer with 0.95Ω secondary windings configured as 8.5Ω (3 secondary sections in series), is the default circuit assessed here (807 related parameters given in {brackets}). The circuit schematic shows idle condition voltages and currents (the first stage power supply voltage is ~305V, not 320V, and the driver stage power supply rail is ~430V). At 15W output, the output voltage is 11.3Vrms. Williamson used an output transformer with 1.7Ω windings configured as 15.3Ω (also 3 secondary sections in series). Williamson related articles and information are collated at http://dalmura.com.au/projects/Williamson.php.
    [Show full text]
  • The Williamson Amplifier of 1947, by P.R. Stinson
    1 THE WILLIAMSON AMPLIFIER OF 1947. An account of D.T.N. Williamson's quality audio amplifier design as published in 1947: Background, development, and fortunes. by P. R. Stinson. Author’s revised edition - September 2020. 2 Advertisement Australasian Radio World March 1948 Swales & Swann were prominent Melbourne makers of P.A. & audio equipment. 1951. Advertisement from the W.W. ‘Williamson Amplifier’ booklet.Vortexion Ltd were pre-eminent U.K. makers of very high quality audio compoments. 3 THE WILLIAMSON AMPLIFIER OF 1947. An account of D.T.N. Williamson's quality audio amplifier design as published in 1947: Background, development, and fortunes. by P. R. Stinson. ************************************************************** 1. INTRODUCTION. 2. AMPLIFIER TECHNOLOGY. 1908-1939. 3. D.T.N. WILLIAMSON. 4. THE QUALITY AMPLIFIER. 1944-5. 5. THE POSTWAR AUDIO SCENE. 1945-7. 6. EARLY REACTION TO THE QUALITY AMPLIFIER. 1947-8. 7. THE PROGRESS OF THE WILLIAMSON. 1948-51. 8. THE WILLIAMSON IN AMERICA. 1948-51. 9. THE ULTRALINEAR ERA. 1951. 10. CONCLUSIONS. Postscripts & Appendices. ************************************************************* Author's Preface. I recognise that this paper is a very selective ramble through the history of audio, and an incomplete account of the contribution of D.T.N. Williamson, but I discovered that trying to describe the ‘Williamson’ amplifier out of context was quite difficult, and I suspect, somewhat less interesting than the story which resulted. The quest for high fidelity sound reproduction is a good story and perhaps this paper will encourage more interest in the subject. I hope it will also encourage the rescue and restoration of the surviving Williamson amplifiers. P.R.S.
    [Show full text]
  • Estimating Performance Parameters from Electric Guitar Recordings
    Estimating Performance Parameters from Electric Guitar Recordings Zulfadhli Mohamad Submitted in partial fulfillment of the requirements of the Degree of Doctor of Philosophy School of Electronic Engineering and Computer Science Queen Mary University of London March 31, 2018 I, Zulfadhli Mohamad, confirm that the research included within this thesis is my own work or that where it has been carried out in collaboration with, or supported by others, that this is duly acknowledged below and my contribution indicated. Previously published material is also acknowledged below. I attest that I have exercised reasonable care to ensure that the work is original, and does not to the best of my knowledge break any UK law, infringe any third partys copyright or other Intellectual Property Right, or contain any confidential material. I accept that the College has the right to use plagiarism detection software to check the electronic version of the thesis. I confirm that this thesis has not been previously submitted for the award of a degree by this or any other university. The copyright of this thesis rests with the author and no quotation from it or information derived from it may be published without full acknowledgement of the source. Signature: Zulfadhli Mohamad Date: March 31, 2018 1 ABSTRACT The main motivation of this thesis is to explore several techniques for estimating electric guitar synthesis parameters to replicate the sound of popular guitarists. Many famous guitar players are recognisable by their distinctive electric guitar tone, and guitar enthusiasts would like to play or obtain their favourite guitarist’s sound on their own guitars.
    [Show full text]