DOCSLIB.ORG

Tarifa De Precios I.V.A

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Tarifa De Precios I.V.A TARIFA DE PRECIOS I.V.A. no incl. Consulte posibles actualizaciones GRIFERÍA MONOMANDO BAÑO Código Artículo € A LAVABO • Monomando lavabo con cartucho cerámico • Maneta metálica • Conexiones flexibles • Portacadenilla FO 33 001 Monomando Lavabo MENTHA 25,27 BIDÉ • Monomando lavabo con cartucho cerámico • Maneta metálica • Conexiones flexibles • Portacadenilla FO 33 002 Monomando Bidé MENTHA 25,27 DUCHA • Excéntricas 150-+24mm • Maneta metálica • Cartucho cerámico • Equipo de ducha rocador+flexo+soporte articulado FO 33 003 Monomando ducha MENTHA 35,11 BAÑERA • Excéntricas 150-+24mm • Maneta metálica • Cartucho cerámico • Equipo de ducha rociador+flexo+soporte articulado FO 33 004 Monomando Bañera MENTHA 41,49 GRIFERÍA MONOMANDO COCINA Código Artículo € COCINA CAÑO CLÁSICO • Cartucho cerámico • Maneta metálica • Conexiones flexibles inox • Caño giratorio FO 33 051 Monomando Cocina caño Clásico LIRIA 31,91 COCINA EXTRAIBLE (BAJO) Cartucho cerámico Maneta metálica Conexiones flexibles inox Caño giratorio FO 33 072 Monomando Cocina Extraible bajo LLANTIA 47,87 COCINA EXTRAIBLE Cartucho cerámico Maneta metálica Conexiones flexible inox Caño giratorio FO 33 071 Monomando Cocina Extraible RAFF 70,48 COCINA PARED • Cartucho cerámico • Maneta metálica • Excéntricas 150-+24mm • Caño giratorio FO 33 052 Monomando Cocina pared ARNICA 45,21 FONTANERÍA A-1 TARIFA DE PRECIOS I.V.A. no incl. Consulte posibles actualizaciones GRIFERÍA MONOMANDO BAÑO A Código Artículo € LAVABO • Monomando lavabo con cartucho cerámico • Conexiones flexibles • Portacadenilla • Sin vaciador automático FO 30 001 Monomando Lavabo serie TITANIUM 39,90 BIDÉ • Monomando lavabo con cartucho cerámico • Conexiones flexibles • Portacadenilla • Sin vaciador automático FO 30 003 Monomando Bidé serie TITANIUM 41,40 DUCHA • Excéntricas 150+- 24mm • Cartucho cerámico • Equipo de ducha rociador+flexo+soporte articulado FO 30 005 Monomando ducha serie TITANIUM 66,90 BAÑERA • Excéntricas 150+-24mm • Cartucho cerámico • Equipo de ducha rociador+flexo+soporte articulado FO 30 007 Monomando Bañera serie TITANIUM 79,90 GRIFERÍA MONOMANDO COCINA Código Artículo € COCINA CAÑO CISNE • Cartucho cerámico • Conexiones flexibles • Caño Cisne giratorio FO 30 010 Monomando Cocina caño cisne serie TITANIUM 75,00 COCINA CAÑO CLÁSICO • Cartucho cerámico • Conexiones flexibles • Caño giratorio FO 30 011 Monomando Cocina caño clásico serie TITANIUM 60,80 COCINA BAJO • Cartucho cerámico • Conexiones flexibles • Caño giratorio FO 30 020 Monomando Cocina bajo serie AQUANOVA FLY 71,10 COCINA PARED • Cartucho cerámico • Excéntricas 150-+24mm • Caño giratorio FO 30 021 Monomando Cocina pared serie AQUANOVA FLY 80,10 COCINA PARED CAÑO BAJO • Cartucho cerámico • Excéntricas 150-+24mm • Caño giratorio FO 30 022 Monomando Cocina pared caño bajo serie AQUANOVA FLY 91,60 A-2 FONTANERÍA TARIFA DE PRECIOS I.V.A. no incl. Consulte posibles actualizaciones GRIFERÍA MONOMANDO BAÑO A Código Artículo € MONOMANDO LAVABO • ComfortZone 70 • Caño 107mm • Caudal 5l/min aproximado a 3bar • Sin vaciador automático FO 31 002 Monomando Lavabo LOGIS 75,80 MONOMANDO BIDÉ • Aireador orientable • Caudal 7.2l/min aproximado a 3bar • Vaciador automático FO 31 004 Monomando Bidé LOGIS 87,40 MONOMANDO DUCHA • Excéntricas 150+-12mm • Caudal de ducha de mano 17 l/min aproxiamdo a 3ba • Válvula antirretorno • Sin equipo de ducha FO 31 006 Monomando ducha LOGIS 93,30 MONOMANDO BAÑERA • Excéntricas 150+-12mm • Caudal de ducha de mano 17l/min aproxiamdo a 3ba • Caño de 194mm • Sin equipo de ducha FO 31 008 Monomando bañera LOGIS 116,70 GRIFERÍA MONOMANDO COCINA Código Artículo € COCINA (BAJO) • Comfort Zone 120 • Caño giratorio 360º • Altura 194 mm FO 31 012 Monomando Cocina LOGIS (bajo) 100,60 COCINA (ALTO) • Comfort Zone • Caño giratorio en 3 posiciones: 110º, 150º, 360º • Colocación del mando a la izquierda o derecha FO 31 013 Monomando cocina LOGIS (alto) 147,40 COCINA DUCHA EXTRAÍBLE • Comfort Zone 240 • Caño giratorio 150º • Posición vertical manecilla • 2 Tipos de Chorro • Sistema antical QuickClean FO 31 021 Monomando Cocina FOCUS ducha extraíble 257,70 FONTANERÍA A-3 TARIFA DE PRECIOS I.V.A. no incl. Consulte posibles actualizaciones GRIFERÍA TERMOSTÁTICA A Código Artículo € TERMOSTATO BAÑERA • Termostato de baño-ducha cascada RS-Q • Inversor integrado • Sin equipo de ducha • Cooltouch FO 30 030 Termostato bañera 196,70 Código Artículo € TERMOSTATO DUCHA • Termostato Ducha RS-Q • Sin equipo de ducha • Cooltouch FO 30 031 Termostato ducha 179,70 Código Artículo € TERMOSTATO BAÑERA • Botón de seguridad a 40ºC • Botón limitador de caudal Ecostop 10l/min • Sin equipo de ducha FO 31 033 Termostato Bañera Ecostat 1001 CL 246,70 Código Artículo € TERMOSTATO DUCHA • Botón de seguridad a 40ºC • Botón limitador de caudal Ecostop 10l/min • Sin equipo de ducha FO 31 032 Termostato Ducha Ecostat 1001 CL 196,20 Información de utilidad para el instalador • Use jabón PH neutro • Pase un paño suave después de usar la grifería para evitar la acumulación de cal. • Aclare con suficiente agua para eliminar cualquier resto de producto de limpieza • Seque la grifería con un paño suave • Para un correcto mantenimiento en rociadores y Consejos teleduchas es importante limpiar periódicamente mantenimiento las boquillas de silicona, pasar los dedos sobre grifería las boquillas haciendo que la cal se desprenda. • No use productos de limpieza que contengan ácidos (clorhídrico, fórmico, fosfórico o acético), alcohol, antical o similares • No mezcle diferentes productos de limpieza • No use productos abrasivos como pueden ser esponjas • No use directamente el producto de limpieza sobre la grifería, sino mediante un paño suave. A-4 FONTANERÍA TARIFA DE PRECIOS I.V.A. no incl. Consulte posibles actualizaciones GRIFERÍA GRANDES DUCHAS A Código Artículo € COLUMNA TERMOSTÁTICA DUCHA TELESCÓPICA • Rociador superior de 300 mm de diámetro • Inversor incorporado • HOTBLOCK, bloqueo automático del agua caliente para evitar quemaduras al usuario • Sistema Cooltouch, mantiene la grifería templada • Altura regulable de 845 a 1485 mm FO 30 053 Columna termostática Ducha telescópica BLAUTHERM 487,10 COLUMNA DUCHA MONOMANDO • Conjunto de ducha monomando • Rociador superior de 204mm de diámetro • Cooltouch FO 30 052 Columna monomando Ducha BLAUTHERM 350,30 Código Artículo € SHOWERPIPE CROMETTA 160 • Características: • Crometta 160 ducha fija • Cabezal 160mm • Rotúla orientable • Tipo de chorro: Rain • Caudal Rain 9l/min aprox. 3bar • Sistema antical QuickClean • Brazo de ducha 350mm • Termostato • Botón de seguridad a 40°C • Salidas individuales con controles giratorios • Soporte de teleducha de altura regulable • Compuesto por: • Crometta 160 • Crometta 100 Vario EcoSmart • Isisflex 1,60m FO 31 050 Showerpipe Crometta 160 435,90 SHOWERPIPE CROMETTA E 240 1 JET • Características: • Crometta E 240 ducha fija • Cabezal 240 x 240mm • Rotúla orientable • Tipo de chorro: Rain • Caudal Rain 15l/min aprox. 3bar • Sistema antical QuickClean • Brazo de ducha 350mm • Termostato • Botón de seguridad a 40°C • Salidas individuales con controles giratorios • Soporte de teleducha de altura regulable • Compuesto por: • Crometta E 240 1 jet • Crometta 100 Vario • Isisflex 1,60m FO 31 051 Showerpipe Crometta E 240 1 JET 513,00 FONTANERÍA A-5 TARIFA DE PRECIOS I.V.A. no incl. Consulte posibles actualizaciones GRIFERÍA CLÁSICA serie ECO A Código Artículo € LAVABO 1 AGUA • Montura convencional probada a más de 500.000 ciclos • Cromado: 15 micras de espesor de níquel, 0,3 micras de cromo • Nivel acústico a 3bar: <20db FO 30 040 Grifo Lavabo 1/2 agua fría AZUL 29,50 FO 30 041 Grifo Lavabo 1/2 agua caliente ROJO 29,50 Código Artículo € BIDÉ 1 AGUA • Montura convencional probada a más de 500.000 ciclos • Cromado: 15 micras de espesor de níquel, 0,3 micras de cromo • Nivel acústico a 3bar: <20db FO 30 042 Grifo Bidé 1/2 agua fría AZUL 29,50 FO 30 043 Grifo Bidé 1/2 agua caliente ROJO 29,50 Código Artículo € COCINA 1 AGUA REPISA • Montura convencional probada a más de 500.000 ciclos • Cromado: 15 micras de espesor de níquel, 0,3 micras de cromo • Nivel acústico a 3bar: <20db • Caño giratorio FO 30 044 Grifo cocina repisa 1 agua fría AZUL 49,60 GRIFO COCINA 1 AGUA PARED • Montura convencional probada a más de 500.000 ciclos • Cromado: 15 micras de espesor de níquel, 0,3 micras de cromo • Nivel acústico a 3bar: <20db • Caño alto de 24,3cm FO 30 045 Grifo cocina pared 1 agua fría AZUL 48,50 GRIFO COCINA 1 AGUA PARED CAÑO BAJO • Montura convencional probada a más de 500.000 ciclos • Cromado: 15 micras de espesor de níquel, 0,3 micras de cromo • Nivel acústico a 3bar: <20db • Caño bajo de 20,3cm FO 30 046 Grifo caño bajo caño cocina pared 1 agua fría AZUL 48,50 GRIFERÍA COCINA 3 VÍAS OSMOSIS Código Artículo € OSMO TWO • Monomando fregadera 3 vías • Indicado para equipos de filtración de agua tipo ósmosis FO 61 505 Monomando 3 vías "OSMO TWO" 150,50 A-6 FONTANERÍA TARIFA DE PRECIOS I.V.A. no incl. Consulte posibles actualizaciones GRIFERÍA COLECTIVIDADES Grifería electrónica A Código Artículo € • Voltaje: 6V DC (4 pilas AA) y 220V AC • Presión de trabajo recomendada: 1 a 5b • Presión máxima: 25b • Temperatura máxima: 80°C • Corte seguridad: 1 min • Cuerpo latón Norma EN-1982 FO 61 202 Grifo electrónico 1 agua 162,50 FO 61 201 Grifo mezclador electrónico. Palanca mezcladora 201,60 Grifo temporizado lavabo repisa Código Artículo € • Una sola agua • Cuerpo y pulsador en latón cromado, piezas interiores resistentes a la corrosión e incrustaciones calcáreas. • Cabeza intercambiable que comprende todo el mecanismo del grifo • Distintivo de temperatura integrado en el cuerpo • Entrada macho ½” • Caudal: 6 l/min • Cierre automático: 15 ± 5s FO 32 005 Grifo Temporizado PRESTO XT-L “pulsación normal” 59,90 FO 32 091 Cabezal para XT “presión normal” 4028 37,30 • Cuerpo y pulsador en latón cromado, piezas interiores resistentes a la corrosión e incrustaciones calcáreas. • Cabeza intercambiable que comprende todo el mecanismo del grifo • Entrada macho ½” • Caudal: 6 l/min • Cierre automático: 15 ± 5s FO 32 006 Grifo Temporizado PRESTO 605 “pulsación normal” 61,90 FO 32 092 Cabezal para 605 “pulsación normal” 1028 37,30 Mezclador temporizado lavabo repisa Código Artículo € • Cuerpo y pulsador en latón cromado.
Load more

Recommended publications
  • Object Oriented Programming
    No. 52 March-A pril'1990 $3.95 T H E M TEe H CAL J 0 URN A L COPIA Object Oriented Programming First it was BASIC, then it was structures, now it's objects. C++ afi<;ionados feel, of course, that objects are so powerful, so encompassing that anything could be so defined. I hope they're not placing bets, because if they are, money's no object. C++ 2.0 page 8 An objective view of the newest C++. Training A Neural Network Now that you have a neural network what do you do with it? Part two of a fascinating series. Debugging C page 21 Pointers Using MEM Keep C fro111 (C)rashing your system. An AT Keyboard Interface Use an AT keyboard with your latest project. And More ... Understanding Logic Families EPROM Programming Speeding Up Your AT Keyboard ((CHAOS MADE TO ORDER~ Explore the Magnificent and Infinite World of Fractals with FRAC LS™ AN ELECTRONIC KALEIDOSCOPE OF NATURES GEOMETRYTM With FracTools, you can modify and play with any of the included images, or easily create new ones by marking a region in an existing image or entering the coordinates directly. Filter out areas of the display, change colors in any area, and animate the fractal to create gorgeous and mesmerizing images. Special effects include Strobe, Kaleidoscope, Stained Glass, Horizontal, Vertical and Diagonal Panning, and Mouse Movies. The most spectacular application is the creation of self-running Slide Shows. Include any PCX file from any of the popular "paint" programs. FracTools also includes a Slide Show Programming Language, to bring a higher degree of control to your shows.
    [Show full text]
  • Flexos IPO - Summary
    Flexos IPO - Summary Notice to readers This summary must be read as an introduction to the Prospectus. It contains selected information concerning FLEXOS and the Offering. It does not necessarily include all the information that may be important to investors. Any decision to invest in the Shares must be based on the full consideration of the prospectus by the investors. This summary should be read together with- and qualified by- the more detailed information and the financial statements (annexes included) that can be found in the Prospectus. It should also be read together with the information given in the section “Risk Factors”. The Company assumes no liability with respect to this summary, including any translation hereof, unless it is misleading, inaccurate or inconsistent with other sections of the Prospectus. If a claim relating to the information contained in the Prospectus is brought before a court, the plaintiff investor might, under the applicable legislation, have to bear the costs of translating the Prospectus before the legal proceedings are initiated. 1. Risk factors FLEXOS is exposed to many risks; the main ones are summarized below. The main risk that the company is exposed to is related to a partnership contract with a British supplier “ScanSafe”, the leader in web security and, through this contract, with “Postini”, the world leader in electronic mail security, now owned by Google. This contract is not a simple distribution contract, but a close partnership and cooperation agreement for the covered territories. The contract is included for two years and is renewed automatically unless one of the parties ends it by giving a three months notice.
    [Show full text]
  • Wikipedia: Design of the FAT File System
    Design of the FAT file system A FAT file system is a specific type of computer file system architecture and FAT a family of industry-standard file systems utilizing it. Developer(s) Microsoft, SCP, IBM, [3] The FAT file system is a legacy file system which is simple and robust. It Compaq, Digital offers good performance even in very light-weight implementations, but Research, Novell, cannot deliver the same performance, reliability and scalability as some Caldera modern file systems. It is, however, supported for compatibility reasons by Full name File Allocation Table: nearly all currently developed operating systems for personal computers and FAT12 (12- many home computers, mobile devices and embedded systems, and thus is a bit version), well suited format for data exchange between computers and devices of almost FAT16 (16- any type and age from 1981 through the present. bit versions), Originally designed in 1977 for use on floppy disks, FAT was soon adapted and FAT32 (32-bit version used almost universally on hard disks throughout the DOS and Windows 9x with 28 bits used), eras for two decades. Today, FAT file systems are still commonly found on exFAT (64- floppy disks, USB sticks, flash and other solid-state memory cards and bit versions) modules, and many portable and embedded devices. DCF implements FAT as Introduced 1977 (Standalone the standard file system for digital cameras since 1998.[4] FAT is also utilized Disk BASIC-80) for the EFI system partition (partition type 0xEF) in the boot stage of EFI- FAT12: August 1980 compliant computers. (SCP QDOS) FAT16: August 1984 For floppy disks, FAT has been standardized as ECMA-107[5] and (IBM PC DOS 3.0) ISO/IEC 9293:1994[6] (superseding ISO 9293:1987[7]).
    [Show full text]
  • MLC Plus 50/100/200 Series User Guide
    User Guide MLC Plus MediaLink® Products 50/100/200 Series User Guide MLC Plus 50/100/200 Series MediaLink Plus Controllers MLC Plus 50 MLC Plus 100 MLC Plus 100 AAP MLC Plus 200 MLC Plus 200 AAP 68-2806-01 Rev. F 08 21 Important Information Safety Instructions Copyright Copyright and Trademark Notices © 2015-2021 Extron. All rights reserved. www.extron.com Trademarks All trademarks mentioned in this guide are the properties of their respective owners. The following registered trademarks (®), registered service marks (SM), and trademarks (™) are the property of RGB Systems, Inc. or Extron (see the current list of trademarks on the Terms of Use page at www.extron.com): Registered Trademarks (®) Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, eLink, Flat Field, FlexOS, Glitch Free, Global Configurator, Global Scripter, GlobalViewer, Hideaway, HyperLane, IP Intercom, IP Link, Key Minder, LinkLicense, LockIt, MediaLink, MediaPort, NAV, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, ShareLink, Show Me, SoundField, SpeedMount, SpeedSwitch, StudioStation, System INTEGRATOR, TeamWork, TouchLink, V-Lock, VN-Matrix, VoiceLift, WallVault, WindoWall, XPA, XTP, XTP Systems, and ZipClip Registered Service Mark(SM) : S3 Service Support Solutions Trademarks (™) AAP, AFL (Accu-RATE Frame Lock), ADSP (Advanced Digital Sync Processing), AVEdge, CableCover, CDRS (Class D Ripple Suppression), Codec Connect, DDSP (Digital Display Sync Processing), DMI (Dynamic Motion Interpolation), Driver Configurator, DSP Configurator,
    [Show full text]
  • File Allocation Table - Wikipedia, the Free Encyclopedia Page 1 of 22
    File Allocation Table - Wikipedia, the free encyclopedia Page 1 of 22 File Allocation Table From Wikipedia, the free encyclopedia File Allocation Table (FAT) is a file system developed by Microsoft for MS-DOS and is the primary file system for consumer versions of Microsoft Windows up to and including Windows Me. FAT as it applies to flexible/floppy and optical disc cartridges (FAT12 and FAT16 without long filename support) has been standardized as ECMA-107 and ISO/IEC 9293. The file system is partially patented. The FAT file system is relatively uncomplicated, and is supported by virtually all existing operating systems for personal computers. This ubiquity makes it an ideal format for floppy disks and solid-state memory cards, and a convenient way of sharing data between disparate operating systems installed on the same computer (a dual boot environment). The most common implementations have a serious drawback in that when files are deleted and new files written to the media, directory fragments tend to become scattered over the entire disk, making reading and writing a slow process. Defragmentation is one solution to this, but is often a lengthy process in itself and has to be performed regularly to keep the FAT file system clean. Defragmentation should not be performed on solid-state memory cards since they wear down eventually. Contents 1 History 1.1 FAT12 1.2 Directories 1.3 Initial FAT16 1.4 Extended partition and logical drives 1.5 Final FAT16 1.6 Long File Names (VFAT, LFNs) 1.7 FAT32 1.8 Fragmentation 1.9 Third party
    [Show full text]
  • Flexos ™ 286 Version 1.31 Release Note 01 May 1987 Contents
    FlexOS ™ 286 Version 1.31 Release Note 01 May 1987 Contents Section tells you the contents of the disks, the necessary development environment, and how to boot up FlexOS from the floppy disks and the.n install it on your hard disk. Section 2 tells you how to use the bootscript, how to link FlexOS modules, how to build a non-bootable system, and how to use the ATLSID debugger. Section 3 describes two new features in Version 1.31, shared memory and removable subdrivers. Section 4 describes three demonstration programs that show some of the capabilities of the Virtual Device Interface. Section 5 lists the known problems in Version 1.31. Section 6 contains a list of errors or omissions in the FlexOS documentation set. Copyright © 1987 Digital Research Inc. All rights reserved Digital Research. CP/M. and the Digital Research logo are registered trademarks of Digital Research Inc. Concurrent. Concurrent PC DOS. FlexOS. and lIB-a6 are trademarks of Digital Research Inc. IBM and PC AT are registered trademarks of International Business Machines. Intel is a registered trademark of Intel Corporation Zenith IS a registered trademark of Zenith Data Systems. MetaWare and High C are trademarks of MetaWare Incorporated. Mouse Systems is a trademark of Mouse Systems Corporation 1073-1001-002 2 SECTION 1 GENERAL SYSTEM INFORMATION 1.1 FlexOS System Software FlexOS 286 Version 1.31 software is shipped on six 5 1/4 inch quad density (1.12 Mb) disks organized into three distinct product assemblies: $oftware Developer _J~i!, Qrjv..~~ W.ri~~J __ .$_uppleme.nt, and QEM Re.di~ri~.~tion Kit.
    [Show full text]
  • Working with S5-DOS/ST C79000-G8576-C760-03 Iii Preface
    Contents, Preface Product Overview 1 Installing and Starting Up 2 SIMATIC S5 User Memory Management 3 Working with Installing Hardware 4 S5-DOS/ST Editing PCP/M Files in MS-DOS 5 Manual File Transfer 6 C79000-G8576-C760-03 Keyboard Editor 7 V.24/TTY Converter 8 Glossary Index ESD Guidelines, Remarks Forms Safety Guidelines This manual contains notices which you should observe to ensure your own personal safety, as well as to protect the product and connected equipment. These notices are highlighted in the manual by a warning triangle and are marked as follows according to the level of danger: Note draws your attention to particularly important information on the product, handling the product or to a particular part of the documentation. Qualified Personnel Only qualified personnel should be allowed to install and work on this equipment. Qualified persons are defined as persons who are authorized to commission, to ground and to tag equipment, systems and circuits in accordance with established safety practices and standards. Proper Usage Note the following: Warning ! This device may only be used for the applications described in the catalog or technical description, and only in connection with devices or components from other manufacturers which have been approved or recommended by Siemens. This product can only function correctly and safely if it is transported, stored and set up carefully and correctly, and operated and maintained as recommended. Trademarks SIMATICR and SINECR are registered trademarks of SIEMENS AG. Copyright E Siemens AG 1994 All Rights Reserved Disclaimer of Liability The reproduction, transmission, or use of this document or its contents is not We have checked the contents of this manual for agreement with the permitted without express written authority.
    [Show full text]
  • Aided Design
    No. 45 January-February 1989 $3.95 THE MICRO TECHNICAL J 0 URN A L Computer Aided Design Thinking of setting up shop as a hardware designer? Schematic capture and board layout tools will not only make you more efficient, they'll really put you in demand. CAD In A Consulting page 8 Business Choosing PCB Layout page 16 Systems · Building Circuits With page 22 Your Computer And More ... Secrets Of Optimization page 26 What to expect from a code optimizer (and what to watch out for). Finding Bargains In The page 34 .~_,_.,. Surplus Market Karl Lunt tells us where he finds the real hardware bargains. What he watches for and what he watches out for. Plus: The Turbo Debugger Arrives 50 MASM5.1 54 And Much, Much, More 1 2 o 74470 19388 3 #1 PROGRAMMABLE EDITOR • Best Multi-Level Undo • Regular Expressions • Pop-Up ASCII Table • Pull-Down Menus • Compiler Support • Column Blocks Until now, if you wanted the best Undo, the best compiler sup­ port, regular expressions and column blocks you chose BRIEpM. If you wanted unlimited keystroke macros, the best ~[ffi~~ ~W£[bM£LiU@~ ©@LQ>\7* configurability, "off the cuff" command language macros and blazing speed, you chose VEDIT PLUS.® ©cmDD iI a®@@a6J@aW~[Q)ULi Now the Choice is Easy The all new VEDIT PLUS 3.0 gives you the best Undo of any editor, the best compiler support, unequaled windows, true • Fully Network Compatible regular expressions and extensive new features. We're lead­ • Call for XENIX and OS/2 versions ing the way with easy to use pull down menus, context sensitive • 30 Day Money-back guarantee help, a pop-up ASCII table, new printing options and much more.
    [Show full text]
  • IPL T PCS4 and IPL T Pcs4i User Guide
    User Guide IP Link® IPL T PCS4 IPL T PCS4i IP Link Power Control Interfaces Preliminary 68-738-07 Rev. C 12 19 Safety Instructions Safety Instructions • English Istruzioni di sicurezza • Italiano WARNING: This symbol, , when used on the product, is intended to AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad alert the user of the presence of uninsulated dangerous voltage within the avvertire l’utente della presenza di tensione non isolata pericolosa product’s enclosure that may present a risk of electric shock. all’interno del contenitore del prodotto che può costituire un rischio di scosse elettriche. ATTENTION: This symbol, , when used on the product, is intended to alert the user of important operating and maintenance (servicing) ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad avvertire instructions in the literature provided with the equipment. l’utente della presenza di importanti istruzioni di funzionamento e manutenzione nella documentazione fornita con l’apparecchio. For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the Extron Safety and Per informazioni su parametri di sicurezza, conformità alle normative, Regulatory Compliance Guide, part number 68-290-01, on the Extron compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento website, www.extron.com. alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo 68-290-01, sul sito web di Extron, www.extron.com. Sicherheitsanweisungen • Deutsch I WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und die einen elektrischen Schlag verursachen können.
    [Show full text]
  • PDF Download MS-DOS
    MS-DOS 6.0 - A/ ESPA - 64 PDF, EPUB, EBOOK Masterchip | none | 01 Oct 1993 | Masterchip | 9789507440670 | English, Spanish | United States MS-DOS 6.0 - A/ Espa - 64 PDF Book Relearning Retro I got this package because I was wanting to do things that were difficult or impossible to do on a modern OS. The new standard requires faster timing speeds, and runs faster than PCI. Most DOS software packages would support it as a de facto display standard , but DOS provided no graphics support, so every program manipulated the board's registers and video memory directly via special drivers. The operating system distribution software also included a relocating assembler and linker. Users said they don't need its large disk partitions, can't afford to update their existing machines, and are wary of problems with how DOS 4. Linux Today. You can find it on GitHub. Brand New. IBM had sued companies that simply copied the code. Market reaction to IBM's Enhanced Graphics Adapter has not been overwhelming, partly because the EGA's complexity—five custom chips and 12 modes—has slowed software development and the board's price tag has been a damper for many, but the EGA is emerging as the next graphics standard. Text mode is required to avoid incompatibilities video conflicts while running many popular TSR programs in graphics mode. By moving video cards from the 8-MHz, bit ISA expansion bus to the CPU's bit local bus running at full clock speed, vendors may improve high-resolution graphics performance on based PCs.
    [Show full text]
  • Retrobrew Computers Forum I Will Try to Spend Some Time in the Next Week Updating the Page for This Board on the New Wiki
    Subject: 6x0x-ATX-6U BOM Posted by brizza on Sat, 04 Feb 2017 01:22:08 GMT View Forum Message <> Reply to Message Hi Guys, It's been a while. I'm restarting a couple builds that have been collecting dust on the shelf for the last 2 years. I should have most of the parts but a BOM would be a handy reference to go with the board layout. Does anyone have a BOM for the 6x0x-ATX-6U revision 2-013 board? I see that Alex posted an excel file with part numbers but the links on the introduction page are not working. Thanks. Nik Subject: Re: 6x0x-ATX-6U BOM Posted by Jonas on Sat, 04 Feb 2017 09:53:05 GMT View Forum Message <> Reply to Message https://retrobrewcomputers.org/n8vem-pbwiki-archive/0/358453 34/48860639/70137767/index.htm Subject: Re: 6x0x-ATX-6U BOM Posted by brizza on Sat, 04 Feb 2017 11:18:52 GMT View Forum Message <> Reply to Message Hi Jonas, Thanks, i'm building up an order with digi-key and the excel file is a great help. Cheers, Nik Subject: Re: 6x0x-ATX-6U BOM Posted by Jonas on Sat, 04 Feb 2017 13:45:56 GMT View Forum Message <> Reply to Message Good luck! I would like to build this board myself, or rather two, given the CPU and OS alternatives! Subject: Re: 6x0x-ATX-6U BOM Posted by Andrew B on Sat, 04 Feb 2017 16:53:23 GMT View Forum Message <> Reply to Message Page 1 of 9 ---- Generated from RetroBrew Computers Forum I will try to spend some time in the next week updating the page for this board on the new wiki.
    [Show full text]
  • Flexo~ Supplement for Intel Iapx 286-Based Computers
    FlexO~ Supplement for ® TM Intel iAPX 286-based Computers COPYRIGHT Copyright ... 1986 Digital Research Inc. All rights reserved. No part of this publication may be reproduced. transmitted. transcribed. stored in a retrieval system. or translated into any language or computer language. in any form or by any means. electronic. mechanical. magnetic. optical. chemical. manual or otherwise. without the prior written pennission of Digital Research Inc.. 60 Garden Court. Box DRI. Monterey. California 93942. DISCLAIMER DIGITAL RESEARCH INC. MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE CONTENTS HEREOF AND SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. Funher. Digital Research Inc. reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of Digital Research Inc. to notify any person of such revision or changes. NOTICE TO USER This manual should not be construed as any representation or warranty with respect to the software named herein. Occasionally changes or variations exist in the software that are not ",fleeted in the manual. Generally. if such changes or variations are known to exist and to affect the product significantly. a release note or README.DOC file accompanies the manual and distribution disk(sl. In that event, be sure to read the release note or README. DOC file before using the product. TRADEMARKS Digital ResearCh. CP/M. and the Digital Research logo are registered trademarks of' Digital Research Inc. FlexOS is a trademark of DigItal Research Inc. We Make Computers Work is a service mark of Digital Research Inc.
    [Show full text]