MDT421S Orientation Landscape / Portrait BRIGHTNESS/LUMENS 700 Cd/M2

Total Page：16

File Type：pdf, Size：1020Kb

MDT421S Orientation Landscape / Portrait BRIGHTNESS/LUMENS 700 Cd/M2

MITSUBISHI ELECTRIC PRESENTATION PRODUCTS MD42” LCD MonitorT421S • Slim eye-catching bezel design • Advanced high-definition digital signage display • Full 1920 x 1080 native resolution • Optional CAT5 transmitter and receiver • Front and rear ambient light sensors LEADING THE EVOLUTION OF digitalHIGH-DEFINITION signage www.mitsubishi-presentations.com 888.307.0349 42” LCD Monitor CLASS 42” (Diagonal) LCD Monitor VIEWABLE IMAGE SIZE 36.6” x 20.6” MDT421S ORIENTATION Landscape / Portrait BRIGHTNESS/LUMENS 700 cd/m2 PIXEL PITCH 0.485 mm CONTRAST RATIO 1100:1 DIMENSIONS 38.0” x 22.0” x 4.6” (W x H x D in.) WEIGHT 52 lbs. (Net) (WITHOUT STAND AND SPEAKERS) BEZEL WIDTH 0.63” RESPONSE TIME 9 ms (gray to gray) VIEWING ANGLE Horizontal and vertical: 178O VIDEO/AUDIO mini D-Sub 15 pin In/Out, HDMI, DVI-D, Optional Stand: INPUTS AND OUTPUTS CAT5 In/Out (optional DP-1CA5), ST-421S DisplayPort, BNC (R,G,B,H,V), S-Video, Composite (RCA, BNC), Audio LR (RCA), Audio Stereo mini jack multiple standard input and output connectors SPEAKER OUTPUT External speaker jack 1 Slot for optional CAT5 3 VIDEO IN/OUT 4 RGB 4 IN/ DVD/HD IN (BNC) 9 RGB 1 IN (HDMI) CONTROL INPUT/OUTPUT RS232C (mini D-Sub 9 In/Out) input/output connectors VIDEO IN connector (BNC and RCA) 5 AC IN connector 10 RGB 2 in (DVI-D) (modular connector 8pin) VIDEO OUT connector (BNC) 6 EXTERNAL SPEAKER TERMINAL 11 RGB 3 IN (mini D-Sub 15 pin) POWER CONSUMPTION 214 W 2 EXTERNAL CONTROL (mini D-Sub 9 pin) S-VIDEO IN connector (Mini DIN 4 pin) 7 AUDIO OUT 12 RGB out (mini D-Sub 15 pin) (WITHOUT SPEAKERS) 8 AUDIO IN 1,2,3 13 RGB 6 IN (DisplayPort) ESTIMATED BACKLIGHT LIFE Up to 50,000 hours* Rear Connector AUDIO SPEAKER Optional - SP-421S Panel TABLE STAND Optional - ST-421S 5 6 7 8 13 9 10 11 12 WALL MOUNT Optional - CTM-VESA 1 2 3 4 COMPATABILITY WARRANTY 3-years parts and labor, Express Out In Out In In In Replacement Assistance, toll-free 24x7 Side Connector technical support Panel *Results may vary depending on usage and operating environment MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC. Presentation Products Division Toll Free: 888.307.0349 Email: [email protected] MITSUBISHI www.mitsubishi-presentations.com ELECTRIC Canada Mitsubishi Electric Sales Canada Inc. PRESENTATION PRODUCTS Information Technologies Group LITMDT421S Phone: 905.475.7728 www.mitsubishielectric.ca.

Copy Link

Recommended publications

United States Patent (19) 11 Patent Number: 5,340,333 Schroth (45) Date of Patent: Aug
USOO5340333A United States Patent (19) 11 Patent Number: 5,340,333 Schroth (45) Date of Patent: Aug. 23, 1994 (54) SHIELDED MODULARADAPTER 5,130,893 7/1992 Straate et al. ....................... 361/392 75) Inventor: Walter D. Schroth, Chester Springs, OTHER PUBLICATIONS Pa. Cables to Go, Trade Literature for Modular Adapters, 73) Assignee: Interconnect Systems Group Inc., Computer Shopper, p. 330 (Mar., 1992). Exton, Pa. National Computer Accessories, Trade Literature for (21) Appl. No.: 5,895 RJ11 Modular Adapters, Computer Shopper, p. 450 (Mar., 1992). 22 Filed: Jan. 15, 1993 AltexElectronics, Inc., Trade Literature for Modular I51) Int. Cl. ........................................... H01R 13/648 Adapter Kits, Computer Shopper, p. 645 (Mar., 1992). 52 U.S. Cl. ...................................... 439/607; 439/95; Primary Examiner-Gary F. Paumen 439/638 Assistant Examiner-Hien D. Vu 58) Field of Search ..................... 439/95, 96, 97, 108, Attorney, Agent, or Firm-Synnestvedt & Lechner 439/92, 638, 654, 650, 676,607, 609 57 ABSTRACT (56) References Cited Modular adapters and similar devices are provided by U.S. PATENT DOCUMENTS this invention which minimize electrostatic interference 3,699,498 10/1972 Haitmanek et al. ................. 439/248 and arcing. These devices include a pair of electrical 3,850,497 11/1974 Knemreich et al. ................ 439/545 connectors joined together with a series of electrical 3,860,316 1/1975 Hardesky ............................ 439/344 conductors. Each of the connectors is provided with a 4,236,779 12/1980 Tang .............. 439/638 surrounding electromagnetic shield, and these shields 4,387,949 6/1983 Haitmanek. ... 439/95 4,392,701 7/1983 Weidler ...... are bridged together with a separate conductor element.
[Show full text]
What Is a Registered Jack? Getting RJ Connector Names Confused
RJ-45 RJ-45 is one of the more popular standardconnector types used with unshielded, twisted pair network cables. The RJ-45 connector type is commonly used with Ethernet cables and includes eight pins that interface with the cable wires electrically and is sometimes used with shielding cabling. The pin-outs of the connector are defined to provide cable manufacturers the location that wires need to be placed when attaching the cable to a RJ-45 connector type. There are a number of other connector types on the market such as RJ-11used for telephone cable connections, but are more narrowly shaped. What is a Registered Jack? The RJ designation for the RJ-45 cable stands for “registered jack” and indicates that the connection is defined in the international standard for physical network interfaces. The standard defines both the wiring pattern and connecting jack construction for those intended for use in data services or telecommunications equipment. The interfaces defined in the RJ standard include RJ-11, RJ-14, RJ-21, RJ-45, and the RJ-48 connector types. Of the defined connectors, the RJ standard primarily makes use of the 50 pin miniature ribbon and modular connector types depending on the specific RJ type that is defined. Getting RJ Connector Names Confused Since the RJ standard defines both the physical geometry and the required wiring pattern, an inspection of just the connector type will not necessarily indicate the type of wiring pattern used in the cable. This is due to the fact that the same connector can be used for different wiring patterns! As a result, there has been a fair amount of confusion by consumers on what type of cable standard is being used depending on the application.
[Show full text]
LDT/MDT Range
348 Victoria Rd Rydalmere, NSW 2116 Phone: (02) 9684 7777 Fax: (02) 9684 7208 www.MitsubishiElectric.com.au All information contained herein is subject to change without prior notice. HDMI, and High-Definiton Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. is a trademark of the Video Electronics Standards Association, registered in the U.S. and other countries. Other brand, product, and service names are trademarks or registered trademarks of the respective companies. Product appearance in this brochure does not imply that Mitsubishi Electric Corporation intends to make it available in all countries where the company and its subsidiaries operate. LCD DISPLAYS FOR DIGITAL SIGNAGE APPLICATIONS Photographs are simulated images. New publication, effective Jun. 2010 Specifications subject to change without notice. Introducing the Ultimate Experience in Digital Signage Specially engineered for public display applications Unsurpassed functionality and high durability ensure superior performance Digital signage with stunning high-definition image quality aesthetically integrated in public spaces such as airports and commuter stations. into any commercial-use environment. Advanced MDT Series LCDs Economical LDT Series LCDs *Photographs are simulated images. MDT421S/MDT521S/MDT651S Highly functional, durable public displays for Link Up to Five Displays in Series using CAT5 6-axis Colour Adjustment Connections Using the remote controller it is possible to choose a specific colour from R, G, B, C, M or Y and adjust its hue and saturation independently. demanding commercial-use applications Use the daisy-chain connection function of the CAT5 receiver and This is especially useful for adjusting the colours of specific parts in output terminal to link up to five displays in series via CAT5 cables.
[Show full text]
RGB 138Xi & 168Xi UNIVERSAL INTERFACES with AUDIO
300 MHz (-3dB) video bandwidth ADSP™ - Advanced Digital Sync Processing 15-150 kHz compatibility Unswitched AC outlet Active audio interfacing Level/Peaking Optional architectural adapter plates Simultaneous RGBS/HV output RGsB output Horizontal & vertical centering ™ RGB 138xi & 168xi UNIVERSAL INTERFACES WITH AUDIO & ADSP Optional mounting kits Rack mountable Internal power supply Female 15-pin HD input (RGB 168xi) Buffered 15-pin local monitor output (RGB 168xi) DESCRIPTION FEATURES (Cont.) ■ Built-in Advanced Digital Sync Processing (ADSP) – All-digital process ensures flawless operation with any LCD, DLP, plasma, or other digital display device. ■ Optional Architectural Adapter Plates (AAP) – Two double-size AAPs for signal pass-through connectors. ■ Two optional mounting kits – Allow for installation under flat surfaces, as well as through them. The RGB 138xi and RGB 168xi are universal, analog ■ Unswitched AC outlet – Lets users power a laptop or other computer-video interfaces with 15-130 kHz scanning ranges peripheral. and 300 MHz (-3dB) of RGB video bandwidth. Both are compatible with nearly all computers and display signals ■ Image centering – Allows the input signal to be shifted on including VGA, SVGA, XGA, SXGA, UXGA, MAC, Sun, and the presentation device for a properly centered image. SGI. These interfaces output simultaneous composite and separate horizontal/vertical sync through six BNC connectors. ■ Level/Peaking – Three level/peaking modes are available to Sync processing is accomplished through Extron’s Advanced compensate for fuzzy images and streaking associated with ™ Digital Sync Processing (ADSP )technology. ADSP provides all- cable resistance and system bandwidth losses. digital processing of sync signals, eliminating incompatibility issues encountered when using analog sync processing with ■ Balanced audio conversion – Unbalanced computer- digital display devices (DLP, LCD, plasma, etc.).
[Show full text]
ICC Thevalue-Leaderin
Residential Structured Cabling Solutions PremiumProducts I ProvenPerformance I CompetitivePrices...ICC Thevalue-leaderin Integrated structured cabling solutions! Wall Outlets Integrated Wall Outlets Integrated Voice, Data, and Video Faceplates . 02 Wall Outlets Data & Voice Data & Voice Wall Outlets Category 6 Data Modular Connectors . 03 Category 5e Data Modular Connectors . 03 Wall Outlets Data Modular Couplers . 03 Audio & Video Voice Modular Connectors . 04 Voice Modular Couplers . 04 Faceplates Audio & Video Wall Outlets F-type Modular Connectors . 05 BNC Modular Connectors . 05 S-Video Modular Connectors . 05 HDMI Modular Connectors . 06 RCA Modular Connectors . 06, 07 Boxes & Jacks Boxes & Surface Mount RCA Compression Modular Connectors . 08 F-type Compression Modular Connectors . 08 BNC Compression Modular Connectors . 08 Audio Speaker Modular Connectors . 09 3.5mm Speaker Modular Connectors . 09 Centers Net.Media Faceplates Décorex Faceplates & Blank Inserts . 10 Décorex Integrated HDMI Inserts . 11 Modules Décorex Integrated RGB-VGA Inserts . 11 Net.Media VDV Décorex Integrated Voice Inserts . 11 Décorex Integrated Audio Speaker Inserts . 12 Décorex Integrated Video Inserts . 12 Tools & Configurable Faceplates . 13 Accessories Configurable Oversized Faceplates . 13 Configurable Angled Faceplates . 14 Configurable Electrical Faceplates & Inserts . 14 Configurable Stainless Steel Faceplates . 14 Configurable Telephone Wall Plates . 15 Cable & Wall Plates Integrated Voice . 16 Accessories Wall Plates Integrated Video . 16 Telephone Wall Plates . 16 Surface Mount Boxes & Jacks Patch Cords Data & Voice Mounting Boxes . 15 Surface Mount Boxes . 17 Surface Mount Voice Jacks . 18 Raceway Sections . 17 Raceway Cutting Tool . 17 Call us : 888-ASK-4-ICC (888-275-4422) TM Net.Media Centers Wall Outlets Integrated 14”, 21”, 28”, and 42” Enclosures . 19 Door Lock and Keys .
[Show full text]
Chapter 1 Principles of Transmission
® Chapter 1 Principles of Transmission Chapter 1 provides the main concepts related to signal transmission through metallic and optical fiber transmission media. Among those concepts, this chapter discusses types of signals and their transmission, the composition and performance of different types of transmission media used within information and communications technology (ICT) systems, and termination hardware commonly used for ICT cabling. Chapter 1: Principles of Transmission Table of Contents Principles of Transmission . 1-1 Introduction . 1-1 Terminology . 1-3 Alternating Current (ac) and Direct Current (dc) . 1-3 Electromagnetics . 1-4 Frequency . 1-5 Power, Current, and Voltage . 1-5 Signal . 1-7 Digital Transmissions . 1-8 Analog to Digital Conversion . 1-9 Analog and Digital Technologies . 1-9 Megahertz (MHz) and Megabit (Mb) . 1-9 Bandwidth . 1-10 Decibel (dB) . 1-10 Copper Cabling Media . 1-11 Overview . 1-11 American Wire Gauge (AWG) . 1-11 Physical Properties . 1-14 Resistance . 1-14 Inductance . 1-15 Capacitance . 1-15 Impedance (Z) . 1-16 Insertion Loss (Attenuation) . 1-17 Cabling Media Properties . 1-18 Return Loss . 1-18 Nominal Velocity of Propagation (NVP) . 1-18 Connectors . 1-19 Balanced Twisted-Pair Cable . 1-20 Overview . 1-20 Cable Construction . 1-20 Insulation . 1-21 Pair Twist . 1-21 Screened/Shielded Twisted-Pair Cable . 1-22 Cabling Performance Classification . 1-24 Conductor Color Codes . 1-26 Balanced Twisted-Pair Cable Jacket Listing Designations . 1-29 © 2017 BICSI® 1-i ITSIMM, 7th edition Chapter 1: Principles of Transmission Balanced Twisted-Pair Cabling Properties . 1-30 Crosstalk . 1-30 Propagation Delay . 1-35 Delay Skew .
[Show full text]
Computer Ports
Computer Ports In computer hardware, a port serves as an interface between the computer and other computers or peripheral devices. Physically, a port is a specialized outlet on a piece of equipment to which a plug or cable connects. Electronically, the several conductors making up the outlet provide a signal transfer between devices. The term "port" is derived from a Dutch word "poort" meaning gate, entrance or door. ETHERNET PORTS: Ethernet is a family of computer networking technologies for local area networks (LANs) commercially introduced in 1980. Standardized in IEEE 802.3, Ethernet has largely replaced competing wired LAN technologies. Systems communicating over Ethernet divide a stream of data into individual packets called frames. Each frame contains source and destination addresses and error-checking data so that damaged data can be detected and re-transmitted. The standards define several wiring and signaling variants. The original 10BASE5 Ethernet used coaxial cable as a shared medium. Later the coaxial cables were replaced by twisted pair and fiber optic links in conjunction with hubs or switches. Data rates were periodically increased from the original 10 megabits per second, to 100 gigabits per second. Since its commercial release, Ethernet has retained a good degree of compatibility. Features such as the 48-bit MAC address and Ethernet frame format have influenced other networking protocols. HISTORY OF ETHERNET: Ethernet was developed at Xerox PARC between 1973 and 1974.[1][2] It was inspired by ALOHAnet, which Robert Metcalfe had studied as part of his PhD dissertation.[3] The idea was first documented in a memo that Metcalfe wrote on May 22, 1973.[1][4] In 1975, Xerox filed a patent application listing Metcalfe, David Boggs, Chuck Thacker and Butler Lampson as inventors.[5] In 1976, after the system was deployed at PARC, Metcalfe and Boggs published a seminal paper.
[Show full text]
IN2118 OPERATION MANUAL Installation and Safety Instructions
IN2118 ELEVATING TABLE MOUNTABLE INSTALLATION INTERFACE WITH MODULAR A/V CONNECTOR FACEPLATES IN2118 OPERATION MANUAL Installation and Safety Instructions For Models without a Power Switch: The socket outlet shall be installed near the equipment and shall be accessible. For all Models: No serviceable parts inside the unit. Refer service to a qualified technician. For Models with Internal or External Fuses: For continued protection against fire hazard, replace only with same type and rating of fuse. Instructions d’installation et de sécurité Pour les modèles sans interrupteur de courant: La prise de courant d’alimentation sera installé près de l’équipement et sera accessible. Pour tout les modèles: Pas de composants à entretenir à l’intérieur. Confiez toute réparation à un technicien qualifié. Pour les modèles équipés de fusibles internes ou externes: Afin d’éviter tout danger d’incendie, ne remplacer qu’avec le même type et la même valeur de fusible. Installations- und Sicherheitshinweise Für Geräte ohne Netzschalter: Die Netzsteckdose soll in der Nähe des Gerätes installiert und frei zugänglich sein. Für alle Geräte: Keine Wartung innerhalb des Gerätes notwendig. Reparaturen nur durch einen Fachmann! Für Geräte mit interner oder externer Sicherung: Für dauernden Schutz gegen Feuergefahr darf die Sicherung nur gegen eine andere gleichen Typs und gleicher Nennleistung ausgewechselt werden. Instalacion E Instrucciones de Seguridad Modelos Sin Interruptor: La conexión debe ser instalada cerca del equipo y debe ser accesible. Para Todos Los Modelos: Dentro de la unidad , no hay partes para reparar. Llame un tecnico calificado. Modelos con Fusibles Internos o Externos: Para prevenir un incendio, reemplace solo con el mismo tipo de fusible.
[Show full text]
Online Catalogue of CCTV Transmission Products Over UTP
TABLE OF CONTENTS HD-TVI/AHD/HDCVI/CVBS Transmission Twisted Pair Solution ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 01 Coaxial Cabling Solution --------------------------------------------------------------------------------------------------------------------------------------------------------------------- 05 Fiber Optical Solution --------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 07 Converter ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ 07 Video Interference Solution -------------------------------------------------------------------------------------------------------------------------------------------------------------- 09 Video /Data/ Power Surge Protector ----------------------------------------------------------------------------------------------------------------------------------------- 11 IP/PoE Transmission IP/PoC Extender/Repeater --------------------------------------------------------------------------------------------------------------------------------------------------------------- 12 PoE Extender/Repeater -----------------------------------------------------------------------------------------------------------------------------------------------------------------------
[Show full text]
Connectivity in DS Applications.Pdf
Connectivity in Digital Signage Applications Cables and connectors are often an afterthought in a digital signage installation. It is critical that customers select a high quality cable and the appropriate connectors for the hardware that they have selected. A customer always wants to make sure that the cable has been properly terminated to the cable so the signal is reliable. The other important aspect is the cable jacket. This is especially crucial when the area the cable is being installed into must meet certain electrical and fire codes like such as CMG, CL3, plenum or direct burial. Every digital signage system will need to have cables, even when the primary distribution method is wireless transmission. Connections from the wireless device to the source or display must still be made via a cable. The following connectors are the most common connector types used in the digital signage environment: VGA (also known as HD15), DVI, HDMI, DisplayPort, and RJ45. VGA VGA or Video Graphics Array refers to analog display standard for computers. Due to the widespread adoption of the technology, VGA has become the colloquial term used to describe the analog computer video signal that is produced or received by a computer or monitor as well as the HD15 connector. This signal and connector has long been the standard for computer video. The HD15 connector is a DB style connector that contains three rows of five pins for a total of fifteen pins. It is a very common connector on CRT monitors as well as most projectors and flat panel TVs. DVI Digital Visual Interface (DVI) is a video interface that was designed to replace VGA.
[Show full text]
Wheatstone Corporation Technical Documentation
Wheatstone Corporation Technical Documentation The Role of Wiring Integrity on WheatNet-IP Network Reliability A Review of Gigabit Ethernet Network Cabling Requirements and Common Installation Practices 600 Industrial Drive New Bern, NC 28562 252.638.7000 www.wheatstone.com Paul Picard – January 2010 v 1.0 Introduction Whether you are building a brand new gigabit network for audio transport, expanding a simple fast Ethernet network, or just making some patch cables for your current network the same general rules apply. By building and maintaining your network the “right way” you ensure the long term reliability of this fundamental but critical part of your IP based audio distribution system. This document will explain the process of selecting the components and building the cabling infrastructure that will be the backbone of your high speed audio data network. Network Speed Any discussion of building a wiring plant for an audio over IP system should start with a clear understanding of what will be connected to the system now and in the foreseeable future. The WheatNet IP Blade hardware was designed to utilize the 1000 Base T Gigabit Ethernet standard exclusively as the transport mechanism for all audio i/o and mix engine traffic. Certain mixing and routing control devices as well as general purpose PC’s on the network continue to use Fast Ethernet 100BASE–TX connectivity. With this in mind, the wiring plant we will discuss must support gigabit connectivity from end to end. Ethernet Wiring Standards While it is true that you could install a basic Ethernet network without knowing anything about standards – short of the RJ45 wiring scheme – installers of Ethernet networks for professional use in commercial spaces which are subject to official inspector review will find the standards information invaluable.
[Show full text]
Manualrs-232 in HDMI BYPASS HDMI IN
User ManualRS-232 IN HDMI BYPASS HDMI IN Audio Authority® Model HBT200T HDBaseT Transmitter Model HBT200T and Model HBT200R ® HDMI and ControlPOWER Signal Extension System IR IR HDCP LINK DC 5V OUT IN CAT5/6 OUT RS-232 IN HDMI BYPASS HDMI IN RS-232 OUT HDMI OUT Audio Authority® Model HBT200T HDBaseT Transmitter Audio Authority® Model HBT200R ModelHDBaseT HBT200T Zone Receiver POWER IR IR HDCP LINK DC 5V OUT IN CAT5/6 OUT IR IR HDCP LINK DC 5V OUT IN CAT 5/6 IN Model HBT200R RS-232 OUT HDMI OUT Audio Authority® Model HBT200R HDBaseT Zone Receiver IR IR HDCP LINK DC 5V OUT IN CAT 5/6 IN Liability Statement Every effort has been made to ensure that this product is free of defects. Audio Authority® cannot be held liable for the use of this hardware or any direct or indirect consequential damages arising from its use. It is the responsibility of the user of the hardware to check that it is suitable for his/her requirements and that it is installed correctly. All rights reserved. No parts of this manual may be reproduced or transmitted by any form or means electronic or mechanical, including photocopying, recording or by any information storage or retrieval system without the written consent of the publisher. Audio Authority reserves the right to revise any of its hardware and software following its policy to modify and/or improve its products where necessary or desirable. This statement does not affect the legal rights of the user in any way. Audio Authority and the Double-A Symbol are registered trademarks of Audio Authority Corp.
[Show full text]