INDEX:

Power Tools Workshop Tools Garden Tools Page 1-5 Page 6-7 Page 8-9

Battery Charger Power Tools Inverter Generator Air Tools Accessories Page 10-11 Page 12-13 Page 14-26

Hand Tools Measuring Tools Safety PPE Products Page 27-37 Page 38-39 Page 39-40 1 Power Tools 2 INGCO-CS1858 INGCO-CS2351 INGCO-RT16008 Circular saw Circular saw Router

INGCO-PLM5002 INGCO-JS7503 INGCO-PS2501 Laminate trimmer Jig saw Palm sander

INGCO-FS3508 INGCO-FS2408 INGCO-FS2901 Finishing sander Finishing sander Finishing sander

6000-1100

280mmx115mm

290W

INGCO-BS8102 INGCO-BS12001 INGCO-RS4501 Belt sander Belt sander Rotary sander

500 M/min

610x100mm 4000-13000 AL 150mm

1200W 450W 3 INGCO-CLD205144 INGCO-CLD205180 Li-ion Battery pack Cordless drill Cordless drill

0-350 0-1250

0.8-10mm

20/36 25/46

CODE V INGCO-BATLI5144 14.4 14.4V 18V INGCO-BATLI5180 18 INGCO-ID211002 INGCO-ID11008.1 INGCO-ID8508 Impact drill Impact drill Impact drill

0-2400

0-2800 0-38400

0-44800 1.5-13mm

1.5-13mm

1100W 850W INGCO-PED4501 INGCO-CS0848 INGCO-MG1301.1 Electric drill Cordless screwdriver Mini drill kit

ACCESSORIES X49pce

INGCO-ESD5501 INGCO-PDG4002 INGCO-GCS45182 Drywall screwdriver Die grinder Electric chain saw

2800

445mm(18”)

260/550ml 4 INGCO-AG13001 INGCO-AG20007.2 INGCO-AG23508.1 Angle grinder Angle grinder Angle grinder

8000 6300

125mm 180mm 230mm

M14 M14 M14

2350W INGCO-AG6508 INGCO-AG6801.6 INGCO-AG9006 Angle grinder Angle grinder Angle grinder

M14 M14/M10

115mm 115/100mm

125mm

650W 680W 900W INGCO-AG9508 INGCO-AP12001 INGCO-AB7501 Angle grinder Angle polisher Aspirator blower

125mm

M14

950W INGCO-MX214001 INGCO-EN5001 INGCO-EH5001 Mixer Nibbler Electric hoist

125/250kgs 250/500kgs 2000 500/1000kgs

12/6m

m/min 8/4 10/5 10/5 IP54

500/900 500W /1600W 5 INGCO-GG141 INGCO-GG301 INGCO-HG200010 Glue gun Glue gun INGCOHG200013.2 Heat gun

INGCO-HG2008.2 INGCO-IW9001 INGCO-RH12501 Heat gun Impact wrench Rotary hammer

800

3200

32mm SDS plus 2000W 1250W INGCO-RH15008 INGCO-RGH9001 INGCO-PDB15001 Rotary hammer Rotary hammer Demolition breaker SDS-MAX System

0-1000

0-5400

26mm SDS plus 900W

INGCO-PL9001.2 INGCO-BJ9001 INGCO-RS11001 Electric planer Biscuit jointer Reciprocating saw

15000 0-2500

150mm

0-3mm

900W 1100W 6 Bench Tools

INGCO-BMS18001 INGCO-BM2S18004 Mitre saw Mitre saw

4500

254mm

Max=305x90mm

45o Adjustable

Slide Move

1800W Alu 7 INGCO-COS3556 INGCO-SS852 INGCO-TS15008 Cut off saw Scroll saw Table saw

INGCO-MS4001 INGCO-TC6501 INGCO-PTC11002 Metal saw Tile cutter Tile cutter

2950/3450

250mm

60mm

1060x510mm working with water

1100W INGCO-DP165001 INGCO-PDB20501 INGCO-RH17001 Drill press Demolition breaker Breaker with hammer function

27J

200-340

1150-1850

65mm SDS max 1700W

INGCO-BGL63501 INGCO-BGL85201 Bench grinder Bench grinder

“Always wear eye and ear protection, as wood working machines throw a huge amount of dust and chips and the high pitched noise will damage your ears”

2950-3450 2950-3450

200mm

350W 520W 8 Garden Tools

INGCO SERVICE CENTRES GAUTENG KWA-ZULU NATAL EASTERN CAPE Skillcraft Agencies (Johannesburg) Bay Power Tool Repairs (Richards Bay) Power-Tek services (Port Elizabeth) Tel: 0860 754552 Tel: (035) 789 7000 Tel: (041) 484 3424 Serg Power Tools (Pretoria) Tool & Fastening World OH Sales (East London) Tel: (012) 751-1203 Tel: (031) 201 5632 Tel: (043) 731 1565 Wynberg Industrial Supplies (Wynberg) WESTERN CAPE Tell: (011) 887-2255 BOTSWANA Sharp-Rite (Jeppe) Skillcraft Agencies (Cape Town) Boikanyo ENG. Supplies Tel: 0860 754552 Tel: (011) 624-3185 Tel: (+267) 241 3558 SA Muscle (Bloemfontein) Fusion Solutions (Brackenfell) Mendel Weld Tel: (021) 981 1963 Tel: (051) 436 0546 Tel: (+267) 397 1880 Rock Hard Hire & Tools (Trichardt) The Tool Man (Paarl) Tel: (021) 872 8711 Tel: (017) 638 0816 LIMPOPO Sandon Trading (Rosettenville) Hire Centre (Hermanus) Tooltric Tel: (011) 435 0281/2 Tel: (028) 316 1385 Tel: (051) 295 5982 Jagu Trading (Vanderbijlpark) Mesco (Massel Bay) Tel: (016) 986 2984 Tel: (044) 695 0431 George Power Tool Repair (George) Tel: (044) 874 0041 Proworx (Oudtshoorn) Tel: (044) 272 0368 9

INGCO-LM383 INGCO-GT3501 Lawn mower Grass trimmer

ALS12601 Double Line

2800

380mm 30L /50L

1600W

Hedge shear Lopper

CODE L CODE L INGCO-HHS6001 600mm/23.5” INGCO-HLT7101 710mm/28”

Hedge shear Lopper

CODE L CODE L INGCO-HHS6301 630mm/24.5” INGCO-HLT7401 740mm/29” 10

INVERTER MMA DC WELDING MACHINE

INGCO-MMA2003 Input Voltage(V) 220 INVERTER Frequency(Hz) 50/60 Input Capacity(KVA) 7.5 TECHNOLOGY No Lead Voltage(V) 62 Current Range(A) 10-200 Max.Current(A) 200 Rated Duty Cycle(%) 200-60 Amp-% Usable Electrode Rod 1.6-5.0mm Protection Class IP21S Insulation Class H Net Weight(Kgs) 7.3

Electrode holder

CODE Rated current (A) INGCO-WAH8001 800

Earth clamp with cable Electrode holder with cable

INGCO-WAC5001.2 INGCO-WAH8001.1 Electronde Cable Cable size Electronde Cable Cable size hodler (A) length (M) (mm2) hodler (A) length (M) (mm2) 500 3 70 800 3 70 11

BATTERY CHARGER • Single phase battery charger and starter • Charging lead-acid battery with 12 or 24 voltage • Equipped with selector for normal charge, quick charge(BOOST), quick start • Application: Ideal for motorcycles, various cars, vans, light trucks, heavy trucks and so on (Any battery capacity lower than 900Ah)

INGCO-CB1601 INGCO-CD2201 Input Voltage(V) 220-240 220-240 Frequency(Hz) 50 50 Charging Voltage(V) 12/24 12/24 Rated Current(A) 9/4 16/18 Boost Current(A) 12 20 Reference capacity(A) 28-180 70-300 Insulation Class H H Weight(Kg) 5.6 15 Dimensio(mm) 375x260x225 565x230x280

INVERTER GENERATOR • Inverter technology delivers quality output • Low noise design, about 54-59dB/7m • User friendly full control panel • Automatic AC circuit breaker • AVR system provides a precise voltage control • 12 volt DC battery charging • INGCO 3HP OHV gasoline engine

Rated AC Voltage(A) 220-240 Rated Frequency(Hz) 50 Max. AC Output(KW) 2.0 Rated AC Output(KW) 1.6 Voltage Regulator AVR Rated Speed(RPM) 5500 Max. Engine Output(HP) 3

Displacement(cc) 220-240 Compression Ration 50 Cooling System 2.0 Starting System 1.6 Fuel tank Capacity(L) AVR Continuous Operation Hours 5500 Dry Weight(kgs) 3 12 Air Tools

INGCO-AKT0051 INGCO-ASG3101 INGCO-ASG4041 Air tools 5pcs set Air spray gun Air spray gun

X5 INGCO-AWG1001 Air blow gun INGCO-ATG0601 Air washing gun Tyre inflating gun

CODE Nozzle lenght (mm) INGCO-ABG031 1.6 13

INGCO-ACN50401 INGCO-ABN15501 INGCO-APS16401 2 IN 1 Combo brad nailer Air brad nailer Air stapler

5.7mm

4-7bar

100pcs

15-50 18GA

16-40

2.35kg Ga18 crown staple 18 Gauge brad nail INGCO-ADG141 1/4” air die grinder

Crown Length CODE (mm) (mm) Length CODE INGCO-AST18251 5.7 25 (mm) INGCO-AST18401 5.7 40 INGCO-ANA18351 35 INGCO-ARD131 INGCO-ARW121 INGCO-ARW121 1/2” Reversible air drill 1/2” Air ratchet wrench 1/2” 3/8” Air ratchet wrench 3/8”

68 68

114 85 85

550 160 160

1.6kg 1.2kg 1.2kg INGCO-AIW11222 INGCO-AIW12561 1” Air impact wrench 1/2” air impact wrench

3100

1019 “New carbon brushes should always be run in under no load for 1” approximately 15 8” minutes prior to use, this allowing them to 6.2bar(90psi) settle in.”

1 3/4”

3600

15kg 14 Power Tools Accessories

Metal saw blade Scroll saw blade

Match with MS4001

X8

CODE L (mm) XN Match with CODE L (mm) Thickness W (mm) Teeth INGCO-SSB81 133 10TPIx2 15TPIx2 SS852 INGCO-MSB13001 1300 0.63mm 12.5 14 TPI 18TPIx2 24TPIx2 15

Wire cup brushes with nut Wire cup brushes with nut

CODE (mm) Thread size(mm) INGCO-WB10751 75 M14 Thread CODE (mm) INGCO-WB11001 100 M14 size(mm) INGCO-WB11251 125 M14 INGCO-WB20751 75 M14 INGCO-WB11501 150 M14 INGCO-WB21001 100 M14

Wire cup brushes with shank Wire wheel for drill

shank shank CODE (mm) CODE (mm) diameter diameter INGCO-WB30501 50 6.35mm INGCO-WB40501 50 6.35mm INGCO-WB30751 75 6.35mm INGCO-WB41001 100 6.35mm

Wire wheel for bench grinders Wire end brushes with shank

CODE (mm) Arobr(mm) shank CODE (mm) INGCO-WB51251 125 22.0 diameter INGCO-WB51501 150 22.0 INGCO-WB70241 24 6.35mm 16

Sanding sheet for orbital sander Sanding belt

CODE (mm),G Match with Size CODE (mm) Holes Grit&Number INGCO-BSP020801 100x610,P80 INGCO-AKFS140101140x110 8 4xP80, 4xP120, 2xP180 INGCO-BSP021001 100x610,P100 PBS12001 INGCO-AKFS280101280x115 8 4xP80, 4xP120, 2xP180 INGCO-BSP021201 100x610,P120

Sanding sheet for random orbit sander Screw Extractor set

Size CODE (mm) Holes Grit&Number Match with 3xP80 CODE Size (mm) INGCO-AKRS150051 150 8 RS45001.2 2xP120 INGCO-ASE001 3-6,6-8,8-11,11-14,14-18

Wool polishing bonnet Polishing pad For wool polishing bonnet

CODE (mm) CODE (mm) INGCO-PB0111801 180 INGCO-PP0201801 180,M14 17

Mix paddle Planer blade

Thread CODE Diameter Length size INGCO-MP1120 120mm 600mm M14x2 CODE Size(mm) INGCO-MP1160 160mm 600mm M14x2 INGCO-EPB820121 82x5.5x1.2

Key chuck Key chuck with SDS Plus adaptor

CODE Size (mm) INGCO-KC1001 3/8-24UNF 1.0-10 INGCO-KC1301 1/2-20UNF 1.5-13 CODE Size (mm) INGCO-KC1601 1/2-20UNF 3-16 INGCO-KC1301.1 3/8-24UNF 1.0-10

Chuck key Glue gun sticks

CODE Size (mm) INGCO-CK1301 110 CODE (mm) L (mm)Match with INGCO-CK1601 85 INGCO-AKTGS2401 11.2 200 GG141 18

INGCO Masonry Drill Bit • Impact-resistant and bend-resistant drill bit, guarantees longer life • Wide and deeply supported plate prevents the tip from breaking out • High-temperature-brazed tungsten carbide blades for fast, accurate and safe drilling • Large volume spiral flute enables optimum drilling dust removal • Low vibration guarantees fatigue-free working •Suitable for drilling holes in granite, concrete, masonry, limestone, natural and artificial stone and so on.

CODE Diameter (mm) Total Length (mm) Working Length (mm) INGCODBM111031 3 60 30 INGCODBM111041 4 75 40 INGCODBM111051 5 85 50 INGCODBM111061 6 100 60 INGCODBM111062 6 150 90 INGCODBM111651 6.5 100 60 INGCODBM111071 7 100 90 INGCODBM111081 8 120 80 INGCODBM111082 8 150 90 INGCODBM111083 8 200 135 INGCODBM111092 9 150 90 INGCODBM111101 10 120 80 INGCODBM111102 10 150 90 INGCODBM111103 10 200 135 INGCODBM111121 12 150 90 INGCODBM111122 12 200 135 INGCODBM111141 14 150 90 INGCODBM111142 14 200 135 INGCODBM111161 16 150 90 INGCODBM111162 16 200 135 19

INGCO SDS Plus hammer dril bit

• Impact-resistant and bend-resistant drill bit, guarantees longer life • Wide and deeply supported plate prevents the tip from breaking out • High-temperature-brazed tungsten carbide blades for fast, accurate and safe drilling • Large volume spiral flute enables optimum drilling dust removal • Low vibration guarantees fatigue-free working • Suitable for drilling holes in granite, concrete, masonry, limestone, natural and artificial stone and so on

Diameter Total Length Working Length CODE (mm) (mm) (mm) INGCODBH1210602 6.0 160 100 INGCODBH1210802 8.0 160 100 INGCODBH1211002 10.0 160 100 INGCODBH1211201 12.0 160 100 INGCODBH1210804 8.0 260 200 INGCODBH1211004 10.0 260 200 INGCODBH1211203 12.0 260 200

INGCO HSS twist drill bit

• Twist drill bits made of high speed steel manufactured to DIN 338 • Right-hand cutting twist drill bits, Type N, drill bit tip 118o • Even chip removal and reduction of chip friction • Extremely true running and precise round holes • No jamming of the main cutting edge and no slipping of the drill bit for through-holes • High fracture strength and long life

Diameter Total Length Working Length CODE (mm) (mm) (mm) INGCODBT1100303 3.0 61.0 33.0 INGCODBT1100403 4.0 75.0 43.0 INGCODBT1100503 5.0 86.0 52.0 INGCODBT1100603 6.0 93.0 57.0 INGCODBT1100803 8.0 117.0 75.0 INGCODBT1101003 10.0 133.0 87.0 INGCODBT1101203 12.0 151.0 101.0 INGCODBT1101303 13.0 151.0 101.0 20

INGCO-AK08351 INGCO-AKD1251 INGCO-AKD2051 35pcs drill bits set 25pcs HSS twist drill bits set 5pcs hammer drill bits set

INGCO wood twist drill bit

• Made of Chrome Vanadium material, hardened and tempered. • Center location point and outer spurs give clean, accurate holes.

Diameter Total Lenght Working Length CODE (mm) (mm) (mm) INGCO-WOOD03 3 61 33 INGCO-WOOD04 4 75 43 INGCO-WOOD05 5 86 52 INGCO-WOOD06 6 93 57 INGCO-WOOD07 7 109 69 INGCO-WOOD08 8 117 75 INGCO-WOOD10 10 133 87 INGCO-WOOD12 12 151 101

INGCO wood flat drill bit

• Made of high carbon steel, hardened and tempered • With 1/4” hex shank and quick release flute • Tip and cutting edges profile ground • Micro groove cutting edge & double spurs for faster cut & longer life

Diameter Total Length Diameter Total Length CODE CODE (mm) (mm) (mm) (mm) INGCODBW2210601 6 152 INGCODBW2212001 20 152 INGCODBW2210801 8 152 INGCODBW2212501 25 152 INGCODBW2211001 10 152 INGCODBW2212801 28 152 INGCODBW2211201 12 152 INGCODBW2213001 30 152 INGCODBW2211401 14 152 INGCODBW2213201 32 152 INGCODBW2211601 16 152 INGCODBW2213601 36 152 INGCODBW2211801 18 152 INGCODBW2213801 38 152 21

INGCO Bi-metal hole saw

•High speed steel M-3 Bi-metal edge welded to alloy steel back for heavy duty cutting •Variable teeth 4/6 TPI •Diameters from 9/16”-8-17/64” (14-210mm) •Cutting depth to 1-1/2” (38mm) •Can be used in portable electric or pneumatic tools, vertical dril machines, lathe, boring/milling machines and other machine tools •Cut through stainless steel and other materials pipe, nail-embedded wood, hard wood floors, plywood and plastics etc.

CODE SIZE (mm) SIZE (inch) INGCO-HSB10241 24 15/16” INOX

INGCO-HAB10301 30 1-3/16”

INGCO-HAB10321 32 1-1/4”

INGCO-HSB10351 35 1-3/8”

INGCO-HSB10761 76 3”

INGCO Bi-metal hole saw set

CODE SIZE (mm) SET Hole saw size:20mm(25/32”),(7/8”),25mm(1”), 29mm(1-1/8”),32mm(1-1/4”),35mm(1-3/8”), 38mm(1-1/2”),44mm(1-3/4”), INGCO-AKH0121 48mm(1-7/8”),50mm(1-31/32”), 12pcs 1Pcs Arbor:1/4” Round Shank, Fit Size:9/16”~1-3/16” 1Pcs Arbor:7/16” Hex Shank, Fit Size:1-1/4”~8-17/64” 1Pcs Adapter:Adapter arbors with 1/2”-20 threads to fit hole saws 5/8”-18 threads

Hole saw set INGCO arbor for hole saw • HSS pilot drill bit 7pce • Hex shank for more torque

INGCO-AKHS702 CODE Shank size Thread size Fits size Size(mm) Height INGCO-HSA01 3/8” 1/2”-20UNF 9/16”-1-3/16” 26,32,38,45,50,56,63 50mm(2”) INGCO-HSA02 7/16” 5/8”-18UNF 1-1/4”-1-8 1/4” 22

INGCO Jig Saw Blade

• Made of high grade carbon steel, high speed steel, Bi-metal or other matel • Depending on applications varying with regard to speed, precision, stability and accuracy.

CODE Description INGCO-JBT118B Basic for Matal, HSS, wavy set,milled, Medium-thick sheet metal (2.5-6mm) Basic for wood, HCS, side set, milled, Softwood (4-50mm), chipboard, wood INGCO-JBT111C core plywood, fibre boards, quick cut. INGCO-JBT101D Clean for wood, HCS, ground teeth and taper ground, Softwood, chipboards, wood core plywood, fibre boards (10-45 mm).

CODE Spec N(pcs) CODE Spec N(pcs) INGCO-JBT118B 118B 5 INGCO-JBT101D 101D 5

CODE Spec N(pcs) CODE Spec N(pcs) 127D 1 127D 1 CODE Spec N(pcs) INGCO-AKJ0051 111C 2 INGCO-AKJ0052 111C 2 INGCO-JBT111C 111C 5 118B 2 118B 2 23

INGCO TCT saw blade for wood cutting

• High grade Tungsten carbide, sharp teeth for more bite • The fast blade for cuts along and across all types of wood. HM • Lower vibration, dampen noise and reduced heat development.

Reduction ring CODE Diameter Max.RPM Teech number Arbor(mm) Application (mm) INGCO-TSB116002 160mm,6-1/4” 9500 48T 16 N.A. Wood Cutting,Circular saw INGCO-TSB116011 160mm,6-1/4” 9500 24T 16 N.A. Wood Cutting,Circular saw INGCO-TSB116012 160mm,6-1/4” 9500 48T 16 N.A. Wood Cutting,Circular saw INGCO-TSB116021 160mm,6-1/4” 9500 24T 16 N.A. Wood Cutting,Circular saw INGCO-TSB118512 185mm,7-1/4” 8200 80T 16 N.A. Wood Cutting,Circular saw INGCO-TSB118513 180mm,7-1/4” 8200 60T 20 N.A. Wood Cutting,Circular saw INGCO-TSB121021 210mm,8-1/4” 7200 24T 30 25.4;16 Wood Cutting,Mitre saw INGCO-TSB125405 254mm,10” 6000 40T 30 25.4;16 Wood Cutting, Table saw INGCO-TSB225405 254mm,10” 6000 40T 30 25.4;16 Wood Cutting, Mitre saw INGCO-TSB225423 254mm,10” 6000 60T 30 25.4;16 Wood Cutting, Table saw

INGCO abrasive cutting and grinding discs

• Grinding and cutting discs for long life and fast work • Cutting discs for work pieces made of metal, stone and stainless steel, less vibration and noise desing • Grinding discs for work pieces made of metal, stone and stainless steel, less vibration and noise design • Reinforced with layers of fiberglass mesh ensure long life, reliability and safety • Stable quality thanks to process by automatic machine

Abrasive Cutting Disc CODE Stone Diameter(mm) Thickness(mm) Bore(mm) INGCO-MCD121151 N.A. 115 1.2 22.2 INGCO-MCD301151 SCD301151 115 3.2 22.2 INGCO-MCD301251 SCD301251 125 3.2 22.2 INGCO-MCD302301 SCD302301 230 3.2 22.2 INGCO-MCD303551 N.A. 355 3.2 25.4

Abrasive Grinding Disc CODE Stone Diameter(mm) Thickness(mm) Bore(mm) INGCO-MGD601151 SGD601151 115 6.0 22.2 INGCO-MGD601251 SGD601251 125 6.0 22.2 INGCO-MGD602301 SGD602301 230 6.0 22.2 24

INGCO abrasive cutting and grinding discs

• High quality tungsten carbide tip, give more bite to workpiece • TC plates brazed to the body of the router bit for a high-quality and secure joint • For standard applications in the workshop and on the construction site

CODE Description Arbor Size INGCO-RTB101021 Straight bit 1/2”x1/2” 30mm INGCO-RTB101041 Straight bit 1/4”x1/4” 20mm INGCO-RTB101043 Straight bit 1/3”x3/8” 30mm INGCO-RTB101044 Straight bit 1/4”x1/2” 30mm INGCO-RTB101045 Straight bit 1/4”x3/4” 20mm INGCO-RTB201041 Core box bit 1/4”x5/16” 6mm INGCO-RTB201042 Core box bit 1/4”x3/8” 6.5mm INGCO-RTB301021 Cove bit with bearing 1/2”x1/2 9.52mm INGCO-RTB301022 Cove bit with bearing 1/2”x5/8” 10.3mm

INGCO-RTB401041 Roman ogee bit 1/4”x1/2” 9.7mm

INGCO-RTB501041 90oV-groove bit 1/4”x3/8” 9.52mm INGCO-RTB501042 90oV-groove bit 1/4”x1/2” 12.7mm INGCO-RTB601021 45o chamfer bit 1/2”1/2” 12.7mm INGCO-RTB601042 45o chamfer bit 1/4”x1/2” 12.7mm INGCO-RTB701041 Dovetail bit 1/4”x3/8” 10mm INGCO-RTB701042 Dovetail bit 1/4”1/2” 13mm INGCO-RTB801021 Flush trim bit 1/2”1/4” 20mm INGCO-RTB801023 Flush trim bit 1/2”x1/2” 30mm INGCO-RTB801041 Flush trim bit 1/4”x1/4” 20mm INGCO-RTB801042 Flush trim bit 1/4”x3/8” 30mm INGCO-RTB801043 Flush trim bit 1/4”x1/2” 30mm INGCO router bits set Shank Bit CODE SPEC diameter number Round over bit:3/8” INGCO-AKRT0601 1/2” 90oV-groove bit 6mm 6 R-4 Roman ogee bit 3pcs Straight bit:6mm,12mm,16mm

Shank Bit SPEC diameter number Straight bit D6mm Straight bit D12mm Straight bit D16mm INGCO-AKRT1201 6mm 12 1/2” 90oV-groove bit 1/2”Dovetail bit 32mm 45oChamfer bit 1/2” Bearing flush trim bits INGCO-AKRT1221 2pcs Round over bit:1/4”,3/8” 12mm 12 1/4” Core box bit R-4 Roman ogee bit 25

INGCO SDS plus,SDS Max,HEX chisel

• Made of Chrome-Molybdenum alloy steel, for demolition and deneral chisel work in concrete and brickwork • Sand blasting finishing

CODE Shank (mm) Width (mm) Working Length (mm) INGCODBC0112501 SDS plus 14 0 250 INGCODBC0122501 SDS plus 14 20 250 INGCODBC0122502 SDS plus 14 40 250

CODE Shank (mm) Width (mm) Working Length (mm) INGCODBC0212801 SDS max 18 0 280 INGCODBC0214001 SDS max 18 0 400 INGCODBC0216001 SDS max 18 0 600 INGCODBC0222801 SDS max 18 25 280 INGCODBC0222802 SDS max 18 50 280 INGCODBC0222803 SDS max 18 75 280 INGCODBC0224001 SDS max 18 25 400 INGCODBC0224002 SDS max 18 50 400 INGCODBC0226001 SDS max 18 25 600 INGCODBC0226002 SDS max 18 50 600 26

INGCO screwdriver bit

• Made of S2 industrial steel, high hardness and torque • Made by German CNC machinery, precisely CODE N(pcs/set) Diameter Total Leght grip on screws • Nickle plated, with megnetic INGCOSDB11PH213 20 PH2 25mm/1”

CODE N(pcs/set) Diameter Total Leght INGCOSDB11PH223 10 PH2 50mm/2”

CODE N(pcs/set) Diameter Total Leght INGCOSDB11PZ223 10 PH2 50mm/2”

CODE N(pcs/set) Diameter Total Leght INGCOSDB11SL413 20 S6.0x1.0mm 25mm/2”

CODE N(pcs/set) Diameter Total Leght INGCOSDB11SL423 10 S6.0X1.0mm 50mm/1”

INGCO Bits holder INGCO Bits holder with quick release

CODE Length CODE Length INGCO-ABH10601 60 INGCO-ABH20601 60 27 Combination pliers Long nose pliers Bent nose pliers Cr-V

LENGTH CODE CODE LENGTH INGCO-HCP01160 160mm INGCO-HCP01180 180mm INGC-HLNP01160 160mm INGCO-HCP08180 180mm/7” INGCO-HLNP01160 160mm Length INGCO-HCP01200 200mm INGCO-HLNP08160 160mm/6” CODE INGCO-HCP08200 200mm/7” INGCO-HLNP01200 180mm INGCO-HBNP08160 160mm/7” Diagonal cutting pliers Heavy-duty Diagonal cutting pliers End cutting pliers Cr-V

CODE Length CODE LENGTH INGCO-HDCP01160 160mm INGC-HHDCP01180 180mm CODE LENGTH INGCO-HDCP01180 180mm INGCOHHDCP01180 180mm INGCO-HECP01160 160mm INGCO-HDCP08180 180mm/7” INGCOHHDCP08180 180mm/7” INGCO-HECP08160 160mm/6” Water pump pliers Carpenter pliers Rabbit pliers Cr-V Cr-V Cr-V

CODE LENGTH CODE LENGTH CODE LENGTH INGCO-HRP08200 200mm/8” INGCO-HPP08250 250mm/10” INGCO-HCPP08200 200mm/8” INGCO-HRP08250 250mm/10” Cable cutter Adjustable wrench Adjustable wrench soft grip

Size Size CODE Length CODE Length (mm) (mm) INGCOHADW131062 150mm/6” 0-20 INGCOHADW31061 150mm/6” 0-20 CODE LENGTH INGCOHADW131082 200mm/8” 0-30 INGCOHADW31081 200mm/8” 0-30 INGCO-HCCB0208 8” INGCOHADW131102 250mm/10” 0-35 INGCOHADW131101 250mm/10” 0-35 INGCO-HCCB0210 10” INGCOHADW131122 300mm/12” 0-40 INGCOHADW131121 300mm/12” 0.41 28

Pipe wrench Bolt Cutter Mini Bolt Cutter

CODE LENGTH O (mm) CODE SIZE INGCO-HPW0310 10” 30 INGCO-HBC0112 12” INGCO-HPW0312 12” 40 INGCO-HBC0114 14” INGCO-HPW0314 14” 50 INGCO-HBC0118 18” INGCO-HPW0318 18” 60 INGCO-HBC0124 24” INGCO-HPW0324 24” 75 INGCO-HBC0130 30” INGCO-HPW0336 36” 85 INGCO-HBC0136 36” CODE Length INGCO-HPW0348 48” 110 INGCO-HBC0142 42” INGCO-HMPC0108 200mm/8” Curved jaw locking plier Long nose locking plier Pinch-off locking plier Cr-V

INGCO-HCJLW0110 LENGTH JAW HARDNESS CODE SIZE W(g) CODE LENGTH 250mm/10” HRC52-HRC56 INGCO-HLNP0109 9” 330 INGCO-HSP0107 7” C-Clamp locking plier Welding plier Leather holepunch

CODE Length CODE LENGTH CODE Punch hole size (mm) INGCO-HCCLW0111 11” INGCO-HWP0110 10” INGCO-HLHP01 2.5, 3, 3.5, 4, 4.5, 5 Wire stripper Wire stripper HD Circlip pliers set 4pce

CODE CUTTING SIZE CODE SIZE MATERIAL CODE SIZE ANGLE INGCO-HWSP03 0.5-6MM INGCO-HWSP04 180mm/9” 65Mn INGCO-HCCP016 6” 180O/90O/45O 29 Machinist hammer Stoning hammer Claw hammer

CODE Length INGCOHMH020100 100mm CODE W(g) CODE W(oz) W(g) INGCOHMH020300 300mm INGCO-HSTH0202 1000 INGCO-HCH0208 8 220 INGCOHMH020500 500mm INGCO-HSTH0204 2000 INGCO-HCH0216 16 450 Ball pein hammer Rubber hammer Rubber and plastic hammer

CODE W(oz) W(g) CODE W(oz) W(g) INGCO-HBPH02016 16 450 INGCO-HRUH0208INGCO-HRUH0208 8 220 CODE INGCO-HBPH02024 24 660 INGCO-HRUH0216INGCO-HRUH0216 16 450 INGCO-HRPH0140 400mm(1-9/16”) Axe Claw hammer Sledge hammer All steel

CODE W(oz) W(g) W(g) CODE W(kg) W(g) CODE INGCO-HCH0116 16 450 INGCO-HAX020600 600 INGCO-HCH0120 20 560 INGCO-HSM01491 4 900 Hand riveter Hand riveter Folding hand riveter

CODE Length Rivet size (mm) CODE Length Rivel size (mm) CODE Size Rivet size (mm) INGCO-HR171 17” 3.2, 4, 4.8 INGCO-HR101 10” 2.4,3.2,4,4.8 INGCO-HFOR321 32” 3.2, 4, 4.8, 6, 6.4 30

Gear puller 2 jaw Gear puller 3 jaws Putty trowel

CODE Length INGCO-HPUT08060 60mm INGCO-HPUT01060 60mm INGCO-HPUT01080 80mm Range of Range of INGCO-HPUT08080 80mm CODE Size CODE Size application application INGCO-HPUT01100 100mm INGCO-HGP01023 3” 20-120mm INGCO-HGP1033 3” 15-80mm INGCO-HPUT08100 100mm INGCO-HGP01024 4” 20-120mm INGCO-HGP1034 4” 20-120mm INGCO-HPUT01150 150mm INGCO-HGP01026 6” 25-160mm INGCO-HGP1036 6” 25-160mm INGCO-HPUT8150 150mm Grease pump Bricklaying trowel Plastering trowel

INGCO-GRG021601 CODE Size(mm) CODE Size(mm) Capacity Pressure INGCO-HBT01150 150 INGCO-HPT280115 280x115 16L 25Mpa INGCO-HBT01200 200 INGCO-HPT280130 280x130 Hand saw Bow saw Mitre box and back saw set

CODE L(mm) INGCO-HMBS3001 INGCO-HHAS02400 400 Mitre box Thickness Back saw INGCO-HHAS02500 500 CODE Size size (mm) size INGCO-HHAS02550 550 INGCO-HBS6101 610mm/24” 300x140x80 20mm 300mm/12” Hacksaw frame Hacksaw frame

“Remember to oil machine before every use”

CODE L(mm) INGC-HHF3001 300mm CODE L(mm) INGCO-HHF3004 300mm/12” INGCO-HHF3001 300mm 31 Interchangeable screwdriver set Flat screwdriver Phillips screwdriver

(mm) (mm) CODE L (mm) CODE (mm) (mm) L (mm) INGCO-HS085100 5.5 5.0 100 CODE N (pcs) INGCOHS08PH1100 PH1 5.0 100 INGCO-HS086125 6.0 5.5 125 INGCOHS08PH2125 PH2 5.5 125 INGCO-AKISD0901 9 INGCO-HS086150 6.5 6.0 150 INGCOHS08PH2150 PH2 6.0 150 Torx screwdriver Pozidriv screwdriver Screwdriver tester

(mm) (mm) L (mm) CODE CODE (mm) (mm) L (mm)

INGCOHS08T10100 T10 5.0 100 INGCO-HS08PZ1100 PZ1 5.0 100 CODE L (mm) Voltage INGCOHS08T20150 T20 6.0 150 INGCO-HS08PZ2150 PZ2 6.0 150 INGCO-HSDT1901 190 AC100-500V 6pcs screwdriver set 6pcs screwdriver set Precision screwdriver set

CODE CODE Spec CODE Spec INGCO-HKSD0611 SL5.5x5x75 PH1x5x75 SL5.5x5x75 PH1x5x75 INGCO-HKSD0608 SL5.5x5x100 PH1x5x100 INGCO-HKSD0601 SL5.5x5x100 PH1x5x100 Diameter SL6.5x6x150 PH2x6x150 SL6.5x6x150 PH2x6x150 SL1.4, SL2.0, SL2.4, SL3.0, PH0, PH1

Spring clamp Staple gun Staples

CODE Size CODE Size(mm) INGCO-HQSC0104 4” CODE Size(mm) INGCO-STS0108 8 INGCO-HQSC0106 6” INGCO-HSG1403 4-14 INGCO-STS0112 12 32

Block planer Planer blade 4pcs Circlip plier set

CODE L(mm) CODE L(mm) CODE Size (mm) INGCO-HBP02250 250 INGCO-HPLB2501 250 INGCO-HCCPS01180 7”/180mm 1.8 Aluminium caulking gun Caulking gun Grease gun

FLEXIBLE HOSE

INGCO-GRG015001 INGCO-HCG0309 Capacity Pressure CODE L(mm) (mm) Size Thickness Length Size Diameter INGCO-HCG0112 330 51 12” 0.8mm 320mm 9” 51 400cc 4500-10000pci INGCO-HFT0122 Ratchet Straps Cold chisel Floor tape

CODE LoadLenght Width CODE Size(mm) L (mm) W (mm) T(mm) INGCO-HRSP361 3T 6m 50mm INGCOHCCL011910 19x16x254 22 50 0.15 INGCO-HRSP3101 3T 10m 50mm INGCOHCCL012512 25x19x305 Concrete chisel Cold chisel and punch set Pin punch set

12pce 6pcs

INGCO-HKPP1201 Size(mm) Cold chisel(mm) 10,13,16 CODE Size(mm) Pin punch(mm) 1.5,3,4,5,6,8 Pin punch INGCOHCC0141016 4x16x254 Center punch(mm) 6,8 CODE size(mm) INGCOHCC0141219 4x19x305 Solid punch(mm) 2.0 INGCO-HKPP0601 1.5, 3, 4, 5, 6, 8 33 Wood chisel Wood chisel Wood chisel Cr-V Cr-V Cr-V

CODE W(mm) L(mm) INGCO-HWC0106 6 200 CODE W(mm) L(mm) INGCO-HWC0806 6 200 INGCO-HWC0814 14 200 CODE W(mm) L(mm) INGCO-HWC0109 9 200 INGCO-HWC0116 16 200 INGCO-HWC0122 200 22 INGCO-HWC0809 9 200 INGCO-HWC0816 16 200 INGCO-HWC0822 200 22 INGCO-HWC0112 12 200 INGCO-HWC0119 19 200 INGCO-HWC0125 200 25 INGCO-HWC0812 12 200 INGCO-HWC0819 19 200 INGCO-HWC0825 200 25 Round steel file Flat steel file Flat wood file Triangle steel file Half round steel file Half round wood file

CODE Name L(mm) CODE Name L(mm) CODE Name L(mm)

INGCO-HSRF088 R-steel file 200 INGCO-HSFF088 F-steel file 200 INGCO-HWFF088 F-wood file 200

INGCO-HSTF088 T-steel file 200 INGCO-HSHF088 H.R-steel file 200 INGCO-HWHF088 H.R-wood file 200 INGCO-HKTW0308 INGCO-HKTFS0308 6pcs file set 3pcs Wood file set 3pcs Steel file set

Spec L(mm) Spec L(mm) Flat wood file x1 200 Flat steel file x1 200 Round wood file x1 200 Round steel file x1 200 CODE Length (mm) Half round wood file x1 200 Half round steel file x1 200 INGCO-HKTF61 4” 3” Flat steel file Round wood file INGCO-HKTFS0508 5pcs Steel file set

Spec Flat steel file x1 Triangle steel file x1 CODE Name L(mm) CODE Name L(mm) Round steel file x1 Square steel file x1 INGCO-HSFF088 Flat steel file 200 INGCO-HWRF088 Round wood file 200 Half round steel file x1 34

Snap-off blade knife Snap-off blade knife Snap-off blade knife

CODE L(mm) Size(mm) CODE L(mm) Size(mm) CODE L(mm) Size(mm) INGCO-HKNS1803 158 18x100 INGCO-HKNS1804 158 18x100 INGCO-HKNS1805 169 18x100 Snap-off blade knife Snap-off blade knife Utility knife

CODE L(mm) Size(mm) CODE L(mm) Size(mm) CODE L(mm) W(mm) INGCO-HKNS1807 158 18x100 INGCO-HKNS1810 158 18x100 INGCO-HUK611 61 200 Snap-off blade knife 10pcs Blades set

CODE L(mm) W(mm) PCS CODE L(mm) Size(mm) INGCO-HKNSB181 100 18 10 INGCO-HKNS1806 129 9x80 INGCO-HKNSB182 100 18 50 100pcs Utility knife blades set 10pcs Blades set

CODE L(mm) W(mm) CODE L(mm) W(mm) INGCO-HUKB612 61 19 INGCO-HUKB611 61 19 35 Tin snip Tin snip Tin snip

CODE L(mm) CODE L(mm) CODE L(mm) INGCO-HTSN0110L 250 INGCO-HTSN0110S 250 INGCO-HTSN0110R 250 Ratchet wrench T-Handle socket wrench

CODE Size:(mm) INGCO-HTSW0801 8x200x300 INGCO-HTSW0901 9x200x300 INGCO-HTSW1001 10x200x300 CODE Teeth Size INGCO-HTSW1201 12x200x300 INGCO-HTSW1301 13x200x300 INGCO-HRTH0314 24 1/4” INGCO-HTSW1401 14x200x300 INGCO-HRTH0338 24 3/8” INGCO-HTSW1701 17x200x300 INGCO-HRTH0312 24 1/2” INGCO-HTSW1901 19x200x300 Hex key Hex key long Ball point hex key

CODE Size(mm) CODE Size(mm) CODE Size(mm) INGCO-HHK01091 1.5-10 INGCO-HHK01092 1.5-10 INGCO-HHK02091 1.5-10 Ball point hex key long Hex key knife Combination spanner set

CODE Size(mm) CODE Size(mm) CODE Size(mm) N(pcs) INGCO-HHK02092 1.5-10 INGCO-HHK04081 2-8 INGCO-HKSPA1142 6-24 12 36

Combination spanner set Double open end spanner set Offset ring spanner set

CODE Size(mm) N(pcs) CODE Size(mm) N(pcs) CODE Size(mm) N(pcs) INGCO-HKSPA1082 6-19 8 INGCO-HKSPA2082 6-22 8 INGCO-HKSPA3082 6-22 8 45pcs 1/4” socket set 25pcs 1/2” socket set 25pcs 1/2” Socket set

CODE N(pcs) CODE N(pcs) CODE Size N (pcs) INGCO-HKTS14451 45 INGCO-HKTS12251 25 INGCO-HKTS0241 1/2” 25 Hydraulic bottle jack Hydraulic fl oor jack INGCO-HHPT01251 Hand pallet truck

CODE Capacity Travel Weight INGCO-HBJ201 2ton 164mm 2.5kg CODE H(mm) W(mm) Capacity Q Fork size(mm) INGCO-HBJ601 6ton 197mm 4.5kg INGCO-HFJ201140-340 8.7 2500kg 540x1150 Tool box Tool box Tool bag hard bottom

INGCO-HTB04 INGCO-HTB02 Size(mm) Steel thickness Size(mm) Steel thickness CODE Size(mm) 370x120x163 0.6-0.8mm 495x200x290 0.6-0.8mm INGCO-HTBG03 16” 37 F clamp with plastic handle G clamps Super light duty bench vice

CODE Size (mm) INGCO-HFC020501 50x150 INGCO-HFC020802 80x300 INGCO-HFC021201 120x300 INGCO-HFC021204 120x400 CODE Size CODE Size W(kg) INGCO-HFC021202 120x500 INGCO-HGC0104 4” INGCO-HFC021203 120x800 INGCO-HBV024 4” 6 INGCO-HFC021404 140x1000 INGCO-HGC0106 6” INGCO-HBV026 6” 12 Copper and aluminium pipe Copper and aluminium pipe PVC pipe cutter cutter cutter

CODE Cutting diameter CODE Cutting diameter CODE L(mm) (mm) INGCO-HPC0128 3-28mm INGCO-HPC0250 5-50mm INGCO-HPC0342 200 3-42 Glass Scraper Glass cutter Glass cutter

CODE L(mm) Wheel CODE L(mm) CODE L(mm) INGCO-HGS0128 128 INGCO-HGCT03 178 INGCO-HGCT02 130 6pcs Tile cutter Paint brush Paint brush

CODE Size H(mm) CODE Size H(mm) INGCO-CHPTB0101 1” 44 INGCO-CHPTB0125 2.5” 51 CODE L(mm) W(mm) INGCO-CHPTB0115 1.5” 44 INGCO-CHPTB0103 3” 57 INGCO-HTC02600 860 160 INGCO-CHPTB0102 2” 51 INGCO-CHPTB0104 4” 57 38

Vernier caliper Digital caliper Dial caliper

INGCO-HVC01150 Range Reading 0-150mm 0.05mm(1/128”) CODE Size INGCO-HVC01200 Reading CODE Range Reading Range Reading INGCO-HDCD01150 0-150mm 0.01mm INGCO-HDC01150 0-150mm 0.02mm 0-200mm 0.05mm(1/128”) INGCO-HDCD01200 0-200mm 0.01mm INGCO-HDC01200 0-200mm 0.02mm Spirit level Spirit level milled Ruler Aluminum incl with grips level

CODE L(cm) T(AI)(mm) INGCO-HSL01030 30 1mm INGCO-HSL01040 40 1mm INGCO-HSL01060 60 1mm INGCO-HSL01080 80 1mm INGCO-HSL01100 100 1mm CODE L(cm) T(AI)(mm) INGCO-HSL01120 120 1mm INGCO-HSL02060 60 1.5mm INGCO-HSL01150 150 1mm INGCO-HSL02080 80 1.5mm INGCO-HSL01180 180 1mm INGCO-HSL02100 100 1.5mm CODE L (cm) INGCO-HSL01200 200 1mm INGCO-HSL02120 120 1.5mm INGCO-HAR01060 60 Mini spirit level Steel measuring tape Steel measuring tape

CODE L(m) W(mm) INGCO-HSMT0103 3 16 CODE L (cm) CODE L(m) W(mm) INGCO-HSMT01052 5 19 INGCO-HMSL01030 22.5 INGCOHSMT0803.1 3 16 INGCO-HSMT0108 8 25 Fibreglass measuring tape Digital display measuring wheel Chalk line reel

CODE L(m) W(mm) INGCO-HFMT0110 10 12.5 INGCO-HDMW01 INGCO-HFMT0120 20 12.5 INGCO-HFMT0130 30 12.5 Tolerance Rang (mm) CODE Length(m) INGCO-HFMT0150 50 12.5 <5% 0-9999 INGCO-HCLR0130 30 39 Stainless steel rulers Carpenters square Carpenters square

INGCO-HSR3001 INGCO-HSRL3001 INGCO-HSRL6001 Size W (mm) T (mm) Size Thickness Size Thickness 300mm/12” 25 0.7 200x300mm/8”x12” 2.0mm 400x600mm/16”x24” 2.0mm Micrometer INGCO-HESA0501 Electronic scale

CODE Size Precision W (kg) Table size Graduation CODE Size Precision INGCO-HMM0050 25-50mm 0.01mm INGCO-HMM0025 0-25mm 0.01mm INGCO-HMM0075 50-75mm 0.01mm 50 240x370mm 5g INGCO-HESA0502 Electronic scale Safety PPE Products

W (kg) Table size Graduation 50 240x370mm 5g

Reflection vest INGCO-SSH09SB Safety boots

INGCO-RV02C Raflective Color Material Size assorment Height Common Orange Polyester tricot 37-47 39cm 40

Ear muff Knitted & PVC dots gloves Nitrile gloves

CODE CODE Gauge Size CODE Size INGCO-HEM01 INGCO-HGVK02 10 9(L)/10(XL) INGCO-HGNG01 9(L)/10(XL) Latex coated gloves Cow split leather gloves Welding leather gloves

CODE Size CODE CODE INGCO-HGVL03 9(L)/10(XL) INGCO-HGVC01 INGCO-HGVW01 Safety goggles Safety spectacles Safety spectacles wrap around

CODE CODE CODE INGCO-HSG02 INGCO-HSG04 INGCO-HSG05 Welding goggles Hand held FFliplip frfrontont helmet wweldingelding welding mask mask

CODE CODE Material CODE Material INGCO-HSGW01 INGCO-HHWM101 PP INGCO-WM101 PP INGCO REPAIR PROCEDURE Our qualified specialist, Ingco service agents repair faulty tools quickly and reliably. You can expect your tools to be returned in excellent condition within three to maximum seven working days. Ingco offers you two alternate ways to repair your power tool.

1. Take your faulty tool to your nearest service agent. Warranty jobs will be free & non warranty will be charged for, Warranty jobs require the original receipt. 2. Bring your faulty tool directly to Skillcraft (Ingco Agent) repair centre, or use a courier service to have the machine delivered to us at your expense, and we will return it by courier.

INGCO SERVICE CENTRES GAUTENG KWA-ZULU NATAL EASTERN CAPE Skillcraft Agencies (Johannesburg) Bay Power Tool Repairs (Richards Bay) Power-Tek services (Port Elizabeth) Tel: 0860 754552 Tel: (035) 789 7000 Tel: (041) 484 3424 Serg Power Tools (Pretoria) Tool & Fastening World OH Sales (East London) Tel: (012) 751-1203 Tel: (031) 201 5632 Tel: (043) 731 1565 Wynberg Industrial Supplies (Wynberg) WESTERN CAPE Tell: (011) 887-2255 BOTSWANA Sharp-Rite (Jeppe) Skillcraft Agencies (Cape Town) Boikanyo ENG. Supplies Tel: 0860 754552 Tel: (011) 624-3185 Tel: (+267) 241 3558 SA Muscle (Bloemfontein) Fusion Solutions (Brackenfell) Mendel Weld Tel: (021) 981 1963 Tel: (051) 436 0546 Tel: (+267) 397 1880 Rock Hard Hire & Tools (Trichardt) The Tool Man (Paarl) Tel: (021) 872 8711 Tel: (017) 638 0816 LIMPOPO Sandon Trading (Rosettenville) Hire Centre (Hermanus) Tooltric Tel: (011) 435 0281/2 Tel: (028) 316 1385 Tel: (051) 295 5982 Jagu Trading (Vanderbijlpark) Mesco (Massel Bay) Tel: (016) 986 2984 Tel: (044) 695 0431 George Power Tool Repair (George) Tel: (044) 874 0041 Proworx (Oudtshoorn) Tel: (044) 272 0368