3MTM Fire Barrier Pillow Our Pillow Will Help You Sleep Better at Night

Total Page：16

File Type：pdf, Size：1020Kb

3MTM Fire Barrier Pillow Our Pillow Will Help You Sleep Better at Night

Fire Protection Products Our Pillow Will Help You Sleep Better At Night. No wire mesh! 3M TM Fire Barrier Pillow Here are five reasons to use the 3M Fire Barrier Pillow: 1. No wire mesh! 2. Three hour UL Listed systems. 3. UL Listed systems up to a 540 sq. in. opening. 4. No graphite. 5. Excellent aging properties. 3M TM Fire Barrier Pillow Wire mesh is no substitute for 3M technology. The 3M Fire Barrier Pillow is a self-contained, highly intumescent product designed to firestop a wide variety of through-penetrations including cable trays (up to two per opening), conduit and blank openings, which penetrate fire-rated construction. During a fire, 3M Fire Barrier Pillow intumesces (expands) and locks itself into place, completely surrounding the penetrant(s) stopping smoke, fire Conduit bank being firestopped. and toxic gases from spreading to the next room or next floor for the rated time period. They are easy to install and great for retrofit projects. Just remove and replace pillows as needed. 3M Fire Barrier Pillows have been tested to the ASTM E 814 test criteria and have been designed to meet the intent of NEC, NFPA, SBCCI, BOCA and ICBO building codes. Blank opening being firestopped. PROPERTIES Color 3M Red Density 6 PCF (nominal) Heat Expansion Begins At: 392˚F / 200˚C Significant Heat Expansion Begins At: 536˚F / 280˚C Firestopped cable tray before the fire. Firestopped cable tray after the fire. Volume Expansion 18% (calculated) L Rating See ULListing No wire mesh. 3M technology intumesces to lock itself into place forming a tight seal, preventing the spread of fire, 3 Hr. UL Listed Systems Yes smoke and toxic gases. SHIPPING INFORMATION Product Description Shpg. Wt. Per UPC Number Packaging Carton Lbs. Per Case Per Pallet FB 249 Pillow 12.5 50051115-16530-1 24 768 2" x 4" x 9" Fire Barrier FB 269 Pillow 12.5 50051115-16531-8 16 512 Pillow 2" x 6" x 9" FB 369 Pillow 15.0 50051115-16532-5 20 360 3" x 6" x 9" 3M Fire Barrier Pillow family of products. Specified Construction Products Department 3M Center 223-2N-21 St. Paul, MN 55144-1000 (800) 328-1687 ©3M 2001 98-0400-5062-1 (52.5)ii.

Copy Link

Recommended publications

Firestopping Plastic Pipes
Firestopping Plastic Pipes The Right Products With The Right Installation A Properly Designed Smoke Seal Stops All The Smoke! Designs And Methods Make Protection Of Combustible Penetrants Smoke Safe And Easy! Seal The use of plastic pipes in construction is increasing with each passing year. Most people are aware of the economies of using plastic pipes as well as some of the benefits... Plastic pipes are easier to install. They are significantly lighter in weight and they are durable in that they won’t Smoke Seals built into the collar may cut off This design places the seal at the top of the open- rust or corrode. The down side is smoke from the room below, but will not stop the ing, above the area of the pipe that is burning. smoke eminating from the burning pipe itself. This not only prevents the passage of smoke that these pipes are combustible from the room below, but also from the decom- and can pose a fire hazard if not position of the pipe itself! properly firestopped! Understanding The Hazards: Plastic pipes when How Intumescent Materials Work: It’s important to exposed to fire will react differently according to the type understand how intumescent materials function when of material they are made from. Some will soften and designing a firestop system. Intumescent materials then char as the fire progresses. Others will soften and contain ingredients that expand and increase in volume melt. If not properly firestopped, these pipes may burn as they are heated. This increase in volume is used to out and leave a passage for fire into adjoining rooms and exert pressure on surrounding surfaces to help fill voids cause a fire to quickly propagate.
[Show full text]
Effect of Fire-Retardant Coatings and Accelerated-Weathering on the Flammability of Wood-Based Materials in Wildland-Urban Interface (WUI) Communities
NIST Technical Note 2094 Effect of Fire-Retardant Coatings and Accelerated-Weathering on the Flammability of Wood-Based Materials in Wildland-Urban Interface (WUI) Communities Laura Dubrulle Mauro Zammarano Rick D. Davis This publication is available free of charge from: https://doi.org/10.6028/NIST.TN.2094 NIST Technical Note 2094 Effect of Fire-Retardant Coatings and Accelerated-Weathering on the Flammability of Wood-Based Materials in Wildland-Urban Interface (WUI) Communities Laura Dubrulle Mauro Zammarano Rick D. Davis Fire Research Division Engineering Laboratory This publication is available free of charge from: https://doi.org/10.6028/NIST.TN.2094 May 2020 U.S. Department of Commerce Wilbur L. Ross, Jr., Secretary National Institute of Standards and Technology Walter Copan, NIST Director and Undersecretary of Commerce for Standards and Technology Certain commercial entities, equipment, or materials may be identified in this document in order to describe an experimental procedure or concept adequately. Such identification is not intended to imply recommendation or endorsement by the National Institute of Standards and Technology, nor is it intended to imply that the entities, materials, or equipment are necessarily the best available for the purpose. National Institute of Standards and Technology Technical Note 2094 Natl. Inst. Stand. Technol. Tech. Note 2094, 30 pages (May 2020) CODEN: NTNOEF This publication is available free of charge from: https://doi.org/10.6028/NIST.TN.2094 Abstract A study of a limited number of commercial fire-retardant coatings (FRCs) designed for wood in outdoor applications, film-forming or non-film forming (stains), and top-coatings (used in combination with a FRC to increase its durability) were characterized by microscale combustion calorimetry (MCC) and cone calorimetry (50 kW/m2).
[Show full text]
Passive Fire Protection Intumescent Vs
Passive Fire Protection Intumescent Vs. Lightweight Cementitious Passive Fire Protection Intumescent Vs Lightweight Cementitious The refi nery environment exposes assets to highly fl ammable commodities, corrosive chemical attack, high pressure, and a broad range of operating temperatures from cryogenic to elevated. To mitigate the risk of loss of life, assets and production from a rapid rise hydrocarbon fi re, an investment in FIRETEX® epoxy intumescent fi reproofi ng will provide asset owners with long life protection with little or no maintenance, which is a business necessity. For decades, the standard approach to fi re protection has been with cementitious fi reproofi ng. Oil and gas processing facilities have recognised that this approach proves to be of high maintenance, short life cycle, provides little to no corrosion protection, and conceals corrosion under fi reproofi ng (CUF). Lightweight cementitious fi reproofi ng requires continued maintenance every three to fi ve years. The porosity of concrete and cracks provide avenues for moisture and contaminates to penetrate leading to degradation of the asset and a compromised fi reproofi ng system. Remove the unnecessary risks! There is a better, proven Lloyd’s Register, Det Norske Veritas, ABS and UL. You can be way to maintain your fi reproofi ng – one that prevents corrosion confi dent that FIRETEX® products meet the most stringent rather than contributing to it. Sherwin-Williams’ world-respected industry test standards for jet fi re, pool fi re, boiling liquid, FIRETEX® series of intumescent coatings is formulated with expanding vapour explosion, and blast resistance. high quality corrosion-resistant resins. The number one FIRETEX® epoxy coatings offer a high performance system that permanent solution for anti-corrosion passive fi re protection will last the design life of the asset with minimal maintenance.
[Show full text]
Localized Fire Protection Assessment for Vehicle Compressed Hydrogen Containers DISCLAIMER
DOT HS 811 303 March 2010 Localized Fire Protection Assessment for Vehicle Compressed Hydrogen Containers DISCLAIMER This publication is distributed by the U.S. Department of Transportation, National Highway Traffic Safety Administration, in the interest of information exchange. The opinions, findings, and conclusions expressed in this publication are those of the authors and not necessarily those of the Department of Transportation or the National Highway Traffic Safety Administration. The United States Government assumes no liability for its contents or use thereof. If trade names, manufacturers’ names, or specific products are mentioned, it is because they are considered essential to the object of the publication and should not be construed as an endorsement. The United States Government does not endorse products or manufacturers. 1. Report No. 2. Government Accession No. 3. Recipient's Catalog No. DOT HS 811 303 4. Title and Subtitle 5. Report Date Localized Fire Protection Assessment for Vehicle Compressed Hydrogen Containers March 2010 6. Performing Organization Code NHTSA/NVS-321 7. Author(s) 8. Performing Organization Report No. Craig Webster – Powertech Labs, Inc. 9. Performing Organization Name and Address 10. Work Unit No. (TRAIS) 11. Contract or Grant No. 12. Sponsoring Agency Name and Address 13. Type of Report and Period Covered National Highway Traffic Safety Administration Final 1200 New Jersey Avenue SE. 14. Sponsoring Agency Code Washington, DC 20590 15. Supplementary Notes 16. Abstract Industry has identified localized flame impingement on high pressure composite storage cylinders as an area requiring research due to several catastrophic failures in recent years involving compressed natural gas (CNG) vehicles. Current standards and regulations for CNG cylinders require an engulfing bonfire test to assess the performance of the temperature activated pressure relief device (TPRD).
[Show full text]
WF300 Intumescent Firestop Caulk
WF300 INTUMESCENT FIRESTOP CAULK Designed for use in sealing through- penetrations and gaps in fire resistance- rated wood frame construction. Type WF300 Caulk is a latex based, high solids firestop caulk. This material, when properly installed, effectively seals penetration openings in wood frame construction against the spread of fire, smoke and combustion by-products. Type WF300 Caulk is a single stage intumescent. When exposed to elevated temperatures, WF300 expands rapidly to seal off voids left by the burning or melting of combustible materials. Type WF300 Caulk is storage stable (when stored according to manufacturer’s recommendations) and will not separate or shrink when dried. WF300 adheres tenaciously to common construc- tion materials such as lumber and gypsum board as well as typi- cal penetrant materials. Features & Benefits • Economical – delivers maximum fire protection at the right price. • Water-Based – easy installation, clean-up and disposal. • Water-Resistant – will not re-emulsify. • Intumescent – expansion fills gaps or voids caused by wood shrinkage, or burning or melting of combustible materials. • Meets ASTM E814 (ANSI/UL 1479). • Acoustically tested – reduces noise transmission. APPLICATIONS Type WF300 Caulk is used to seal through penetrations and gaps in fire resistance rated wood frame construction such as floor/ceilings and walls or partitions. Most common penetrating items were successfully tested with WF300. • Through-penetrations and gaps in wood frame construction. FILL, VOID, OR CAVITY MATERIALS FOR USE IN JOINT SYSTEMS & THROUGH-PENETRATION FIRESTOP SYSTEMS SEE UL DIRECTORY OF PRODUCTS FOR THE U.S. AND CANADA; UL FIRE RESISTANCE DIRECTORY PERFORMANCE Type WF300 Caulk is the basis for systems that meet the exacting criteria of ASTM E 814 (ANSI/UL1479) as well as the time/temperature requirements of ASTM E 119 (ANSI/UL263).
[Show full text]
Technical Committee on Liquefied Petroleum Gases
Technical Committee on Liquefied Petroleum Gases Date: July 2, 2015 To: Technical Committee on Liquefied Petroleum Gases From: Eric Nette, P.E. Staff Liaison/Engineer Re: Agenda Package – NFPA 58 A2016 Second Draft Meeting – August 4-5, 2015 Enclosed is the agenda package for the August 4-5, 2015 meeting for the NFPA 58 Second Draft Meeting. Please ensure that you have reviewed the public input and the other agenda items in advance to prepare for discussion. The agenda and public comments will be posted on the document information pages (www.nfpa.org/58). Some items to have available during the meeting include: Agenda package with public comments A copy of NFPA 58 (visit the NFPA 58 Document information pages for your free committee copy) Any previous copies of the technical committees standard A laptop Optional items that are sometimes useful include: Review of NFPA’s Process, www.nfpa.org/regs If you have any questions or comments, please feel free to reach me at (617) 984-7434 or by e-mail at [email protected]. I look forward to our meeting to continue the revision cycle! Technical Committee on Liquefied Petroleum Gases AGENDA NFPA 58 A2016 First Draft Meeting August 4-5, 2015 Doubletree Suites Minneapolis http://nfpa.adobeconnect.com/nette/ 8:00 a.m. to 5:00 p.m. (Central Time Zone) 1. Meeting opening, introduction and attendance 2. Approval of First Draft Meeting Minutes of September 30-October 2, 2014 (Attachment A. September 30-October 2 2014 Meeting Minutes). 3. Chair's remarks, Richard Hoffman 4. Staff Liaison update: a.
[Show full text]
FIRETEX® M90 Series
Protective & Marine Coatings Europe, Middle East, Africa & India ® FIRETEX M90 Series Hydrocarbon passive fire and cyrogenic spill protection solutions for oil & gas industries INTUMESCENT PASSIVE FIRE PROTECTION INTUMESCENT PASSIVE FIRETEX® FX Hydrocarbon passive fire and cyrogenic spill protection solutions for oil & gas industries #3 #6 Intumescent coat 1 Topcoats #2 #5 Thermal insulation Intumescent coat 2 and CSP coating #1 #4 Primers Scrim cloth TOP COAT PASSIVE FIRE PROTECTION FIRETEX M90/02 OR M93/02 TOP COAT TOP COAT TOP COAT THERMAL INSULATION / CSP THERMAL INSULATION / CSP PASSIVE FIRE PROTECTION PASSIVE FIRE PROTECTION FIRETEX M89/02 FIRETEX M89/02 FIRETEX M90/02 OR M93/02 FIRETEX M90/02 PRIMER PRIMER PRIMER PRIMER Thermal insulation or cryogenic spill protection. Thermal insulation or cryogenic spill protection Hydrocarbon pool fire protection. Hydrocarbon pool and jet fire protection. and hydrocarbon fire protection. Suitable for use in the most severe conditions, consult your Sherwin-Williams representative for specification advice and details of approved primers and topcoats. 2 www.protectiveemea.sherwin-williams.com FIRETEX® FX Hydrocarbon passive fire and cyrogenic spill protection solutions for oil & gas industries Thermal barrier/ Passive fire cryogenic spill protection for protection M89/02 hydrocarbon pool ■ Syntactic epoxy foam used as a thermal insulator and for and jet fire M90/02 cryogenic spill protection. It also allows intumescent products to be applied to surfaces operating at >80°C. ■ FIRETEX® M90/02 provides up to four hours of hydrocarbon ■ A seamless, 100% solids, epoxy resin based insulation fire protection. product that can be used at operating temperatures as low as ■ Provides a corrosion resistant protective coating for the design -75°C and as high as +150°C.
[Show full text]
Shop-Applied Intumescent Fireproofing Cuts Schedule and Speeds Erection
health care Shop-applied intumescent fireproofing cuts schedule and speeds erection. Fire Protection toBY CHRIS GRIFFITH Go THE BIOMED 21 initiative at Washington University School of The architect, Canon Design, St. Louis, designed a portion of Medicine in St. Louis was launched in 2003. The initiative has the 675,000 sq.-ft facility to be constructed as a canopy over the St. gained widespread recognition for its collaborative, interdisciplin- Louis MetroLink tracks that cross the campus property. To support ary research and subsequent advancements in treating some of the base floor of the 11-story structure, architects specified 45-ft society’s most prevalent health problems. By 2007, the program’s to 55-ft cellular SMARTBEAM® construction. They were selected success prompted BJC HealthCare, one of the largest nonprofit instead of standard wide-flange beams because of their light weight health care provider organizations in the U.S., to help fund the yet comparable strength and their excellent vibration control capa- Tconstruction of a new research center on campus to house labora- bility. The cellular design also allows for an easier installation of tories and support facilities for BioMed 21, which has since been the ductwork through the openings in the beam webs, as opposed renamed the BJC Institute of Health. to cutting custom penetrations in the solid steel webs. Above: A fireproofing system consisting of primer, a layer of carbon Opposite page: Because the new BJC Institute of Health facility fiberglass mesh between two layers of intumescent fireproofing mate- was designed to straddle the MetroLink rail lines in St.
[Show full text]
Safe Coat Later Intumescent Coating
EAGLE SPECIALIZED COATINGS R AND has excellent ahesion and durabilitLya. tex may be tinted with a latex based "Universal Tint". PROTECTED Intumescentwill adhere to metal and actsCo as aa rust-inhibitotingr. ENVIRONMENTS is easy to use - may be brush, roller or spray A Division of DW Pearce Enterprises Ltd . (1979) applied PRODUCT DESCRIPTION TECHNICAL DATA and PROPERTIES SafeCoat Latex Intumescent Coating is a single Coating Type Latex component latex, intumescent fire retardant coating Finish White, flat finish ideally suited for interior applications on various Color Standard: White combustible substrates including SPF Plywood Optional: Black (Spruce/Pine/Fir), Oriented Strand Board (OSB), wood Tinting May be tinted (light colors only) trusses and rough stud construction, where Flame Use standard latex or universal Spread Ratings of 25 or less ("Class A" or Class 1) and colorants. Do not exceed 26 mL of low Smoke Developed Ratings are required. It limits tint per liter of SafeCoat Latex. flame spread by expanding to many times the original Specific Gravity 10.9 lbs/US Gallon or 1.30 g/mL dry film thickness when exposed to heat. This Solids by Weight 58% expanded material forms a char which insulates the Solids by Volume 47% substrate against heat, and reduces available oxygen VOC 25 g/l 0.2 lbs/USG to the surface. It provides a "Class A" Flame Spread Dry Time Touch: 30 min. to 1 hour (varies rating of 25 or less as tested under ASTM E84 and with temperature and humidity) CAN4-S102 standards and various Fire Resistance Recoat: 1 to 2 hours tested floor/ceiling/wall assemblies as tested under Full cure: 48 hours ASTM E-119 Floor/Ceiling, NFPA 251, Small Scale Film Thickness Wood Test, CAN4-S101.
[Show full text]
AUS Propane Test
Technical Report 303 Sevenoaks Street Cannington Western Australia 6107 Telephone: (08) 9422 5297 Facsimile: (08) 9422 5244 Investigation into the Effect of Vehicle Fires on the Integrity of LP Gas Containers Installed to AS/NZS 1425:2007 Revision Description Date A Initial Report 13/01/2010 B Issued for Internal Review 28/01/2010 C Issued for Stakeholder Review 29/04/2010 Effect of Vehicle Fires on LP Gas Containers Installed to AS/NZS 1425:2007 EnergySafety EXECUTIVE SUMMARY Following several incidents in which the fuel containers of LPG vehicles exploded violently in fires, a review was undertaken by the EnergySafety Division of the Western Australian Department of Commerce to establish measures that would reduce the likelihood of such events. Current design standards require containers to be fitted with a Pressure Relief Valve (PRV) which should, under all but the most severe conditions, release the contents in a controlled manner when the container is exposed to fire and prevent an explosion, however, experience has shown that explosions can and do occur. A survey of the current literature revealed that flame impingement on an uninsulated, thin walled container (even though protected by a PRV) and substantially filled with LPG was very likely to produce a rupture and that this could be instantaneously followed by a Boiling Liquid Expanding Vapour Explosion (BLEVE) and further by a Vapour Cloud Explosion (VCE). BLEVE’s generate powerful shock waves that are capable of totally destroying the containment vessel and surrounding structures and usually also gives rise to high velocity projectiles. In the case of LPG containers where a rupture is initiated by fire, it is very likely that the LPG released by the BLEVE will explode in a VCE, in which the entire mass of LPG is burnt almost instantaneously, producing a further blast wave and a fireball.
[Show full text]
Intumescent Carbon Donors Win More Time for People & Structures 2 a Winning Technology
Intumescent carbon donors Win more time for people & structures 2 A winning technology Intumescent systems offer halogen-free fire protection for people and property. Today, the use of intumescent systems is growing thanks THE RIGHT PRODUCT AT THE RIGHT to their safe chemical profile in terms of handling and TIME - WHEREVER YOUR ARE environment, as well as their efficient protection that meets Charmor™ polyols are a rich carbon source for producing stringent fire safety regulations. superior intumescent systems. Our production of Charmor™ is carried out at our plant in Germany with excellent global Intumescent systems are ideal as protective coatings and supply capability. High product quality is assured by ISO 9001 sealants in the construction industry, for fire resistant plastics procedures, and our precise milling technology for polyol in electrical, electronics and transportation. micronization and quality control procedures ensure that at least 98% of our Charmor™ products are below the stated Intumescent systems work by forming a thick, stable carbon particle size values, 40 μm and 15 μm. foam barrier when exposed to fire, and have three key components: Having our own production facilities allows us to tightly control the total quality chain from sensitive raw materials, • CHARMOR™, THE CARBON SOURCE through manufacturing and milling, to bagging and • AN ACID DONOR SUCH AS APP (AMMONIUM distribution. This ensures the consistent high polyol purity and POLYPHOSPHATE) narrow particle size distribution that are essential to achieving • A SPUMIFIC/BLOWING AGENT SUCH AS MELAMINE high and consistent performance every time. The absence of coarse particles also ensure homogeneous chars without cracks and craters.
[Show full text]
3MTM Firedamtm Intumescent Coating WB 1000 WB1000 Training Module
3MTM FireDamTM Intumescent Coating WB 1000 WB1000 Training Module 1 © 2011, 3M All Rights Reserved. 3M Fire Protection Systems WB1000 Training Module What Is It? Intumescent A thermal-chemical process whereby exposure of a material to heat causes it to swell with a resulting dramatic increase in volume and thickness Fire resistance The term fire resistance represents the period of time that a material or object can maintain it’s intended performance during a fire. Most commonly equivalent to maintaining its structural integrity during a fire. BEFORE BURN TEST DURING BURN TEST AFTER BURN TEST © 2011, 3M All Rights Reserved. 3M Fire Protection Systems WB1000 Training Module Intumescent Coating Applications • Most common application for Intumescent coatings is fire proofing exposed structural steel for interior applications. • New trend to use Intumescent coatings to enhance the fire rating of other building materials such as: – Gypsum drywall board – Ignition barrier over polyurethane foam insulation – Burn through protection of composite materials © 2011, 3M All Rights Reserved. 3M Fire Protection Systems WB1000 Training Module Product overview ™ ™ 3M FireDam Intumescent Coating WB 1000 • A clean, smooth finish for exposed steel • Fire ratings up to three hours as per ULC-S101 and ASTM E 119 (UL 263 ) • Water-based • Easy application and fast drying time • Low VOC, no chlorinated compounds 3M™ FireDam™ Intumescent Coating • Tested and approved with UL/ULC Environmental Test with no WB 1000 is a single component water- topcoat for general interior applications based thin film coating to fireproof interior structural steel. 3M™ FireDam™ Intumescent Coating WB 1000 for steel • Ability to be top-coated with approved acrylic or silicone alkyd should be installed by trained and paint to match surroundings certified 3M authorized applicators.
[Show full text]