Auto ID 2D CODE READERS General Catalogue AUTO ID DATA CONTROLLERS SETTING a NEW STANDARD for Code Reading Combining Performance and Reliability

BARCODE READERS Auto ID 2D CODE READERS General Catalogue AUTO ID DATA CONTROLLERS SETTING A NEW STANDARD for code reading combining performance and reliability

READ! VISUALISE!

Advanced decoding algorithms provide View reading performance and ensure stable best-in-class reading capability. operation without a PC!

2 FIXED-TYPE READERS/CAMERA TYPE

Autofocus SR-1000 Series 6 Setting the standard for code reading

PoE SR-750 Series 12 Stable reading for difficult-to-read 1D and 2D codes

Ultra Compact SR-700 Series 13 High performance reading in a compact body

CONNECT! FIXED-TYPE READERS/LASER ∙ CCD TYPE Digital, Laser Type BL-1300 Series 16 High speed and high resolution 1D compact code reader

Long-range, Laser Type BL-700 Series 18 Ultra long range and outstanding angle capabilities

Ultra Compact, CCD Type BL-180 Series 19 Ultra-compact size, half the size of a business card

PERIPHERAL EQUIPMENT

AutoID Data Controller DV-90 Series 20 Verifies, evaluates and converts data to I/O signals

RS-485 Master Unit N-410 Series 21 Supports Multi-Drop and Multi-Head Mode

Communication with a variety of controllers, Dedicated Power Supply/ Communication Units such as PLCs and laser markers, is possible! 22 Selectable to match the specifications of the device This makes it possible to construct systems that match their environments.

HANDHELD-TYPE READERS

DPM Code Model SR-G100 24 Easy to read challenging codes

1D and 2D Code Model HR-100 Series 26 Wide target area and high-speed response

Barcode Model BL-N70 Series 27 Auto ID Various communication models are available to connect with EASY-TO-USE HIGH PERFORMANCE different PC or PLC systems.

3 APPLICATIONS

Identification solutions for every industry and every application. KEYENCE is dedicated to providing solutions for product traceability and management. A full line of 1D and 2D code readers, along with dedicated control and communication devices, ensures complete and reliable solutions.

AUTOMOTIVE/CHASSIS ASSEMBLY

Reading the engines handled by Gantry loaders Differentiating door part types Selecting the correct parts for assembly

Identify which engine type is present by reading a 2D code Prevent assembly error and manage production history for Identify which parts should be selected for assembly by marked on the engine. traceability. reading a code containing the information.

METALS/MACHINING

Reading metal billet IDs Traceability at manual operation Identifying crankshafts for traceability

Identify which parts are rolling down a conveyor by reading Read codes stably on metallic and cylindrical surfaces. Confirm which product is present regardless of code position 1D codes printed on the labels. Stable reading reduces cycle time. with the code reader’s wide field of view.

PLASTICS/MOULDING

Identifying correct product before assembling Traceability management for headlight Managing traceability for injectors

Read a code marked on the product to confirm the correct part Read codes on label regardless of code position with the code It can read quickly, reducing the glare on the black resin is present before assembly. reader’s wide field of view and far distance reading. cylinders.

4 FOOD/PHARMACEUTICALS

Prevent incorrect mixing of products Correct product identification Label detection

Confirm if the correct part is present at the correct time by Confirm the correct product is present by reading the barcode Verify presence of a barcode when applying packaging labels, reading the barcodes printed on the packaging. data on the packaging. even at high speeds.

SEMICONDUCTORS/ICS

Confirm PC board presence Identify codes marked on lead frame Identify several IC parts at once

Check that the correct PC board is present at the correct time Trace product history throughout the entire process by reading Read codes on several IC parts at once to confirm that all are by reading 2D codes marked on the boards. a 2D code marked on the copper lead frame. present.

OTHERS

Carrier identification Wafer identification at FOUP station Data verification

Ensure the correct carrier is present by reading a 1D or 2D code. Identify which wafer is present when loading and unloading by Inkjet printed codes on an uneven background (cardboard) can reading a 2D code marked on the wafer. be read stably.

5 SR-1000 Series Autofocus 1D and 2D Code Reader

PRESS THE BUTTON

AUTOFOCUS

1 The reader can be mounted at any distance. (1000 mm max.)

AUTOMATIC TUNING

2 Determines optimum settings for exposure time, image processing filter, etc. [Approx. 750000 combinations]

AUTOMATIC POLARISATION

3 Glare can be eliminated. Reader angle adjustment or external lighting becomes unnecessary.

SET-UP COMPLETE

6 1 EASY SET-UP BY “JUST PRESSING THE BUTTON” AUTOFOCUS

Mounting is less restricted by the performance or specifications of the code reader itself, thus improving EVEN IF THE CODE IS flexibility in machine designing for production lines SMALL and jigs.

0.063 mm

Distance: 110 mm

2 EASY SET-UP BY “JUST PRESSING THE BUTTON” AUTOMATIC TUNING

The code reader automatically optimises the exposure Distance: time, image processing filter and other parameters 1000 mm according to the target and mounting distance. Range: 1.6× LONGER 290 mm × 220 mm than conventional models 4× WIDER EVEN IF THE DISTANCE IS than conventional models FAR EVEN IF THE POSITION CHANGES

CAPTURE BRIGHTNESS CONTRAST THRESHOLD FILTER GEOMETRIC CORRECTION CORRECTION CORRECTION CORRECTION Automatically configures various Automatically corrects black/white Automatically selects the best filter Corrects distorted codes, such as combinations of exposure time, thresholds and optimises the contrast and filtering intensity to correct the those on cylinders and other round dynamic range and gain in order to between code and background. captured image. surfaces or when the reader is achieve the optimal brightness. mounted at an angle.

Example codes requiring brightness correction Example codes requiring threshold correction Example codes requiring filtering Example codes requiring geometric correction

Black resin PCB Brass Nylon resin Low contrast Ceramic Bleeding Thick printing Thin printing Parallel Trapezoidal Tread barrel distortion distortion distortion

7 3 EASY SET-UP BY “JUST PRESSING THE BUTTON”

AUTOMATIC With polarisation filter (polarised light) POLARISATION CONTROL

The code reader automatically removes glare and eliminates the need for mounting angle adjustment or external lighting during installation. When combined with the autofocus function, mounting becomes highly flexible.

Without polarisation filter (direct light)

Without polarisation filter With polarisation filter

BLACK RESIN ERR OK

CYLINDER

METAL ERR OK

HAIRLINE

METAL OK ERR

DPM ON CAST SURFACE

NEW OPTICAL DESIGN FOR STABLE READING

CPC (COMPOUND PARABOLIC CONCENTRATOR) ILLUMINATION Conventional model SR-1000 A specially shaped reflector has been designed to create high efficiency illumination by reducing loss in light intensity from the high intensity LEDs. Gold plating maximises the reflectance to achieve brightness exceeding conventional levels by 400%. This provides reading under bright, uniform illumination even at long ranges. Light is concentrated effectively within the field of view to provide high intensity illumination.

8 FIRST-IN-ITS-CLASS, BUILT-IN OLED DISPLAY

CHECK OPERATION ON-SITE WITHOUT A PC

There is no need for a personal computer or monitor in the facility. The code position adjustment and operating condition can be checked simply with the intuitive built-in display.

Live View Readout data display OK/ERROR count display

PUSH! Ethernet setting data I/O signal behaviour display Data communication condition display

VARIOUS INTERFACE CAPABILITIES AND EXPANDED FUNCTIONALITY

COMPATIBILITY WITH VARIOUS COMMUNICATION PROTOCOLS Built-in EtherNet/IPTM, PROFINET, and PLC link protocols make PLC connections easier. In addition, general-purpose TCP/IP and FTP communications are also supported. With FTP communication, transmission of not only images but also text data is also possible.

Connection information for various PLC types can be found here: www.barcodereader.com

CUSTOMISABLE OUTPUT FORMATS USING DATA EDIT FUNCTION Thanks to customisable output formats for the code reader, programming corrections on the host side (PC, PLC, etc.) are not required, allowing for shorter data processing time.

EXAMPLES OF DATA EDIT FUNCTION IN USE

INSERTING ADDITIONAL EXTRACTING SPECIFIC DATA INFORMATION TO IMAGE FILE NAMES CONTROLLING OUTPUT SIGNALS

Read OK 01 Read OK 01 0 12345 67899 8 OK NG

12578 OK/NG output based on Read OK 02 Read NG 01 vertex coordinates of code

9 OPTIONAL ACCESSORY LINEUP

IMPROVED READING OF EXTREMELY SMALL CODES High resolution attachment SR-10AH

Improved reading of extremely small codes and codes printed on mirror finished surfaces.

0.025 mm Mounting image

FIELD OF VIEW: VARIABLE INSTALLATION DISTANCE FOR INCREASED BY 4.5 times EXTREMELY SMALL CODES Increased by Comparison with conventional models When KEYENCE’s test codes are used Mounting distance 40 mm 4.5 Cell size 0.040 mm 8.0 times When the image capturing range is mm 800 × 600 pixels

Conventional model 20 mm 3.5 SR-D100HA mm to 5.5 mm 11 mm 40 mm

AUTOMATIC CONTROL OF OPTIMAL READING HIGHLY FLEXIBLE MOUNTING CONDITIONS Comparison with conventional models When auto-tuning is enabled

Dark field

DEAD SPACE

Bright field

SR-1000 + Conventional SR-10AH model

APPLICATION EXAMPLES

Micro-size sample (chip LED) Mirror finished surface (wafer) Metal (IC package)

3 mm

10 SYSTEM CONFIGURATION DIAGRAM

SR-1000 Series

Standard type Wide-field type SR-1000 SR-1000W

PC for setup

Mounting bracket Adjustable bracket OP-87866 OP-88002

For setup Setup Software SR-H6W USB

High resolution attachment Reflector attachment Ethernet SR-10AH SR-10AR • AutoID Network Navigator • AutoID Keyboard Wedge • AutoID Terminal • MultiMonitor • FileView • Various driver files • EDS/GSDML files * SR-1000 only • Sample Windows programs

Cable POWER SUPPLY

USB CABLE 24 VDC power supply

USB cable plugA-miniB 24 VDC 2 m: OP-51580

CONTROL CABLE HOST Control cable NFPA79 compliant 2 m: OP-87224 control cable 5 m: OP-87225 2 m: OP-87353 PC/Panel PC/Board PC 10 m: OP-87226 5 m: OP-87354 10 m: OP-87355 RS-232C Serial communication, PLC link NFPA79 compliant control cable with D-sub 9-pin 2 m: OP-87527 5 m: OP-87528 I/O terminal PLC 10 m: OP-87529

ETHERNET CABLE Ethernet HMI [Touch panel] NFPA79 compliant Ethernet cable 2 m: OP-87230 5 m: OP-87231 10 m: OP-87232 TCP/IP, FTP, PLC link

11 SR-750 Series PoE & Compact 1D and 2D Code Reader

FOUR MODELS AND DEDICATED LENS ATTACHMENTS TO SUPPORT VARIOUS READING CONDITIONS The four models of the SR-750 Series cover a wide range of applications from reading tiny codes printed on very small parts to reading codes from a long distance.

MODEL LINEUP CABLES

High-resolution type Close-range type Middle-range type Long-range type Long-range type + lens Long-range type + lens SR-750HA SR-750 SR-751 SR-752 SR-752 + SR-75L4 SR-752 + SR-75L6

Minimum resolution 0.082 mm 0.127 mm 0.19 mm 0.19 mm 0.33 mm 0.5 mm Control cable Focal distance 38 mm 60 mm 100 mm 250 mm 400 mm 600 mm 2 m: OP-87224 Reading distance 5 m: OP-87225 (mm) 10 m: OP-87226 0 NFPA79 compliant 50 Control cable 100 2 m: OP-87353 5 m: OP-87354 150 Minimum resolution 10 m: OP-87355 0.082 mm 200

250 Max. 300 305 mm NFPA79 compliant Control cable 350 w/connector

400 2 m: OP-87527 5 m: OP-87528 450 Max. 10 m: OP-87529 490 mm 500 Lens attachment SR-75L4/75L6 550 The detection distance can be extended further by NFPA79 compliant 600 installing the attachment on Ethernet cable the SR-752 long-range 650 Max. 2 m: OP-87359 type. 690 mm 5 m: OP-87360 700 10 m: OP-87361 The reading range above is a value measured with a KEYENCE test label. Max. 305 mm, 490 mm, and 690 mm are for DataMatrix (cell size 0.5 mm).

CONFIGURATION LENS SOFTWARE ATTACHMENT Setup software 400 mm lens: SR-75L4 Ethernet plug SR-H6W 600 mm lens: SR-75L6 assembly OP-87362

12 SR-700 Series Ultra Compact 1D and 2D Code Reader

SMALLEST IN ITS CLASS WITH OUTSTANDING EASE-OF-USE KEYENCE focused on functionality and ease-of-use, while designing the smallest 1D and 2D code reader in its class.

SYSTEM CONFIGURATION DIAGRAM

RS-232C RS-422A/485 N-R2 RS-232C HOST N-R2 N-R4 N-R4 RS-422A

N-UB USB-COM PC USB Ethernet N-R4 RS-485 N-410K RS-232C SR-700 N-UB N-L20 Series N-L20 Ethernet PLC

TCP/IP, FTP, PLC link

MODEL LINEUP SR-700HA SR-700 SR-710 CONFIGURATION EXTENSION CABLE High-Resolution Close-Range Middle-Range SOFTWARE

Minimum resolution 0.082 mm 0.127 mm 0.19 mm

Focal distance 38 mm 60 mm 100 mm

Reading distance Setup software NX-CO3R (3 m) (mm) SR-H6W NX-CO5R (5 m)

100

Minimum 150 resolution 0.082 mm 200

13 SETUP SOFTWARE SR-H6W

EASY-TO-USE HIGH PERFORMANCE

Anyone can easily configure advanced reading settings and optimal communication settings. What’s more, the improved measurement modes support accurate and reliable operations.

EASY SETUP

Simple Tuning steps allow for quick configuration; automatically configuring the SR Series with optimal reading conditions.

Monitor the field of view to adjust the position of the code.

The focus is adjusted automatically.

Automatically selects from about 750000 parameter combinations and whether or not to enable the polarisation filter.

ETHERNET COMMUNICATION WIZARD

Setup can be completed in just four steps with a question-answer form including visual explanations. In previous versions, the user needed to understand the settings available on the screen and determine which items required input. The new version uses a setup wizard to eliminate the need of item extraction, reducing man-hours for communication setup.

STEP TRIGGER SETTINGS STEP DESTINATION FOR READ DATA 1 (I/O input, command input) 2 (Field network, PC)

STEP COMMUNICATION PROTOCOL STEP ADVANCED SETTINGS 3 (EtherNet/IPTM, PROFINET, TCP, UDP, or PLC link) 4 (Detailed setting for each protocol)

14 SPECIFICATION AND INSTALLATION CHECK

INSTALLATION GUIDE: Selecting the optimal reader model and a preview of the field of view can be done based on code size and working distance.

OPERATIONAL TESTING AND MAINTENANCE

LIVE VIEW & READING TEST: AUTO ID TERMINAL: Reduce manhours for setup by executing reading tests: check read rate, Establishes direct communication with the code reader decode time, and determine which banks are best used for reading. in order to isolate problems due to communication.

SIMPLE OPERATIONS

AutoID KEYBOARD WEDGE: MULTI-MONITOR: Just like when a handheld reader is used, data can be output to See Live Images from up to 16 connected Readers at a spreadsheet. once to monitor operation.

A B C 1 123 2 3 4

15 BL-1300 Series Ultra-Compact Digital Barcode Reader

HI-SPEED 100% decoding rate at 1300 scans/sec is unmatched NEW HIGH-SPEED MOTOR AND RECEIVER LENS by conventional barcode readers BL-1300 Series models have a high-speed motor 2.6 times faster than previous models, enabling performance of New high-speed motor (2.6 times faster 1300 scans and 1300 decodings per second. KEYENCE has than previous models) and high-speed also developed a new aspherical lens that has doubled the processing engine (HPPE*). intensity of the received beam (the read source), reducing noise and increasing the effective label reading distance. * HPPE = Hi-Speed Parallel Processing Engine

HI-RESOLUTION Minimum readable narrow bar width: 0.08 mm

Digital processing guarantees stable decoding of barcodes with incredibly small margins. This allows codes to be printed smaller without the worry of noise affecting the reader.

CODE39: 16 digits

HI-PERFORMANCE

New digital processing reads very low quality codes HIGH-SPEED PROCESSING CIRCUIT The new HPPE* in BL-1300 Series models provides about A new edge detection process accurately 100 times the information processing capacity of previous extracts the points of alternation between models, providing reading performance that combines high bars and spaces in even the most speed and high precision. difficult-to-read barcodes, while digital

compensation makes it possible to read * HPPE···Hi-Speed Parallel Processing Engine varying narrow/wide ratios.

16 NEW DECODING PROCESS PROVIDES UNRIVALED READING PERFORMANCE:

Scans barcode Converts to easily decodable information

Controls the waveform of the Received beam waveform AGC received beam to set its amplitude AGC to a level suitable for reading. Converted to appropriate level Accurately detects the points of alternation between bars and spaces

Acquires the received beam The received beam waveform is Differential waveform in 10-bit gradations and converted to a 10-bit Processing applies differentiation (shown in digital waveform. waveform diagram on the left). Differential process waveform The amount of change increases at Removes noise components the point of alternation Noise (signals not relevant to the code between space and Extracts Reduction information) such as faint printing bar. amount and background patterns. of change

Creates emphasised waveform at point of Edge Detects points of alternation alternation. Detection between bars and spaces (edges).

Binarised waveform Modifies the narrow/wide ratio to enable accurate decoding Identifies bars and spaces from New extracted edges. Adjusts the narrow/wide ratio to eliminate the New Decoding Decoding Engine negative impact of running print ink Engine and reader mounting angle. Modifies ratio

THE ORIGINAL DIGITAL PROCESSING TECHNOLOGY SOLVE TYPICAL READING PROBLEMS

Thick print lines Thick print lines prevented adequate space between BL-1300 Series use noise reduction and edge PREVIOUS MODELS bars, forcing the reader to move to the next bar without SOLUTION detection to recognise the difference between spaces obtaining the proper amplitude. and faint printing, enabling accurate decoding.

Problem: Spaces are extremely narrow

Reading from diagonal orientation (pitch angle) When reading from an angle, previous models couldn’t BL-1300 Series reliably detect edges to recognise PREVIOUS receive adequate beam intensity, and barcode SOLUTION barcodes, and use New Decoding Engine to compensate MODELS recognition failed. for bar width ratio variations created by tilted orientations.

Problem: Drop in received beam intensity, bar ratio variations

MODEL LINEUP

Front Type Side Type Standard Range High Accuracy Long Range High Accuracy Single Line BL-1300 BL-1300HA BL-1370 BL-1350HA Front type Side type Raster BL-1301 BL-1301HA BL-1371 BL-1351HA

CONFIGURATION SOFTWARE EXTENSION CABLE

Setup software NX-CO3R (3 m) SR-H6W NX-CO5R (5 m) NX-CO8R (8 m)

17 BL-700 Series Long Distance Laser Barcode Reader

SUPERIOR READING ANGLE CAPABILITIES HIGH SPEED: 700 scans/s KEYENCE’s original AGC (Auto Gain With a 32-bit RISC CPU chip and KEYENCE’s control Control) provides superior angle +27˚ technology, –13˚ –5˚ +30˚ reading capabilities. This revolutionary the BL-700 Series achieves 700 scans (700 decodings) per reading capability is outstanding second. An ultra high-speed response that reliably reads compared to other models. BL-700 barcodes moving at high speed on production lines. The BL-700 Series provides reliable Reads labels within the range of reading regardless of the orientation or -55 to +55° angles. size of the labels.

LONGEST READING RANGE IN ITS CLASS: 1.2 m With KEYENCE’s laser technology, the BL-700 Series allows an ultra-long distance read. Even if the target size varies, the AGC function ensures a reliable reading through an unparalleled reading depth.

SPACE-SAVING, SLANTED-CORNER DESIGN MODEL LINEUP High-resolution Middle-range Long-range The slanted corner of the housing allows the cable to be routed in any Single Line BL-700 BL-740 BL-780 direction. Since the BL-700 Series requires no space for a connector, it Raster BL-701 BL-741 BL-781 can be neatly mounted anywhere, such as the side of a conveyor, in a space just as large as its body size.

Vertical mounting Horizontal mounting Direct wall mounting

18 BL-180 Series CCD Barcode Reader

ULTRA-SMALL BODY 47 × 55 × 20 mm STABILITY LED FOR EASY MOUNTING READS LABELS AS WIDE AS 80 mm The BL-180 Series features a highly visible STABILITY LED indicator. The The BL-180 Series ultra-small CCD barcode reader is easily optimal mounting position can be determined quickly and easily. mounted in any device, allowing the complete system to be Moreover, reading errors can be prevented by checking the reading downsized. Despite the small size, KEYENCE’s original performance rate or the decode count output. optical technology achieves a built-in decoder and reads labels as wide as 80 mm.

The LED shows the performance rate with three colours: green, orange, and red.

EXCELLENT READING DEPTH OF ±10 mm Reading can be performed even when there are vibrations or height variations in the targets. KEYENCE’s original optical technology and high 80 mm intensity LED ensure a reading depth of ±10 mm, which enables stable reading.

MODEL LINEUP

READS BARS AS NARROW AS 0.125 mm The high-resolution of the BL-180 Series can read bars narrow as 0.125 mm

Front type Side type BL-180 BL-185

19 DV-90 Series AutoID Data Controller

IMMEDIATE VERIFICATION/ EVALUATION OF CODE DATA

The DV-90 compares the data acquired with a code reader to the data Lamp PLC USB registered in advance (preset data) for verification. The evaluation result Computer Buzzer is output in parallel*. Easy settings without the need for difficult PLC programming. Synchronisation Parallel input *The output can be selected from bit, binary, and BCD. Up to 900 pieces of master data can be output Photoelectric registered. sensor, etc.

Code Reader Output NO. Preset data Readout data BL/SR Series DV-90 Code Reader BL/SR Series

PLC PORT1 PORT2 Output RS‐232C RS‐232C

Computer HR Series

Barcode reader DV-90 MODEL LINEUP Comparison result DV-90NE (NPN Type) DV-90PE (PNP Type)

APPLICATION EXAMPLES

Prevent incorrect products from Provide instructions during the Prevent careless mistakes during Prevent mistakes when filling being packed assembling process the packaging process chemical bottles

20 N-410 Series Multi-Drop Controller

The N-410K polls (requests data 5678 • • • • • • • • • • No data 8901 from) each code reader, and it 4321 %P02-00085678 %P02-00084321 transmits the obtained data to the %P03-00088901 host computer.

N-410K RS-485 Master Unit

RS-232C

Up to 31 code readers can be controlled simultaneously. Host computer (Maximum total cable extension: 1.2 km) RS-485

MULTI-HEAD MODE MUTUAL INTERFERENCE PREVENTION FUNCTION The N-410K controls several code readers as if they were a single The N-410K controls several code readers so that they scan alternately, unit, without using a host computer. This mode is useful when the eliminating mutual interference. This function is useful when several code position of labels varies between work pieces. readers must be installed close to each other to read a label with multiple codes.

Communication Communication unit N-R4*/N-48 unit N-R4*/N-48

RS-485

Host computer SR-700/ BL-1300/ N-410K BL-700/ N-410K BL-180 RS-232C RS-232C

Sensor for synchronisation Sensor for synchronisation

SR-700/BL-1300/ BL-700/BL-180

* The device that can be connected to the N-R4 is the SR-700/BL-1300. * The device that can be connected to the N-R4 is the SR-700/BL-1300.

21 DEDICATED POWER SUPPLY/COMMUNICATION UNITS

Power Supply/Communication Units Power Supply/Communication Units AutoID Data Controller Multi-Drop Controller

N-R2 N-R4 N-UB N-L1 N-L20 BL-U2 N-42 N-48 DV-90 N-410K

SR-700 ü ü ü ü ü ü*2 ü*2 ü*2 ü*2 ü

BL-700 ü*1 ü*1 ü*1 ü*1 ü ü ü ü ü

BL-1300 ü ü ü ü ü ü*2 ü*2 ü*2 ü*2 ü

BL-180 *1 *1 *1 *1 Connectable ü ü ü ü ü ü ü ü ü code reader HR-100 ü*5 ü*5 ü*5 ü*5 ü*6 ü*6 ü*6 ü*6

HR-100B ü*7 ü*8 ü*8 ü*8 ü*8

SR-1000 ü*4

SR-750 ü*4

Connector type 12 pin round connector D-Sub 9 pin D-Sub 25 pin

DC ü ü ü ü ü ü ü ü ü ü Power type AC

RS-232C ü ü ü ü

USB ü ü

Interface RS-422A ü ü RS-485 ü*3 ü*3 Ethernet (TCP) ü ü EtherNet/IP™ ü Field network PROFINET ü

OPTION

Model Type Model Type OP-80616 Round 12 pin connector - D-sub 9 pin Conversion connector (0.2 m) OP-22149 D-sub 25 pin cross connector NX-C03R Extension Cable (3 m) for Round 12 pin connector OP-27937 D-sub 9 pin - D-sub 9 pin cross cable (2 m) NX-C05R Extension Cable (5 m) for Round 12 pin connector OP-29859 D-sub 9 pin - D-sub 9 pin straight cable (1.5 m) NX-C08R Extension Cable (8 m) for Round 12 pin connector OP-29860 D-sub 25 pin - D-sub 9 pin straight cable (1.5 m) NX-CD2M D-sub 9 pin connector - Round 12 pin Conversion Connector OP-25057 D-sub 9 pin - D-sub 25 pin Conversion Connector OP-35331 USB cable (3 m) OP-88081 D-sub 9 pin cross connector (without 9 pin) OP-87533 D-sub 9 pin cross connector

OP-80616 NX-C03R NX-CD2M

22 DEDICATED POWER SUPPLY/COMMUNICATION UNITS

Power Supply/Communication Units Power Supply/Communication Units AutoID Data Controller Multi-Drop Controller

N-R2 N-R4 N-UB N-L1 N-L20 BL-U2 N-42 N-48 DV-90 N-410K

SR-700 ü ü ü ü ü ü*2 ü*2 ü*2 ü*2 ü

BL-700 ü*1 ü*1 ü*1 ü*1 ü ü ü ü ü

BL-1300 ü ü ü ü ü ü*2 ü*2 ü*2 ü*2 ü

BL-180 *1 *1 *1 *1 Connectable ü ü ü ü ü ü ü ü ü code reader HR-100 ü*5 ü*5 ü*5 ü*5 ü*6 ü*6 ü*6 ü*6

HR-100B ü*7 ü*8 ü*8 ü*8 ü*8

SR-1000 ü*4

SR-750 ü*4

Connector type 12 pin round connector D-Sub 9 pin D-Sub 25 pin

DC ü ü ü ü ü ü ü ü ü ü Power type AC

RS-232C ü ü ü ü

USB ü ü

Interface RS-422A ü ü RS-485 ü*3 ü*3 Ethernet (TCP) ü ü EtherNet/IP™ ü Field network PROFINET ü

*1 NX-CD2M is required. *2 OP-80616 is required. *3 N-410K is required as a master unit. *4 OP-87533 + OP-87527/87528/87529 are required. *5 HR-1C3RC + OP-87533 + NX-CD2M are required. *6 HR-1C3RC + OP-87533 are required. *7 HR-UC1 + HR-1C3RB + OP-88081 + NX-CD2N + OP-87530 + OP-99032 are required. *8 HR-UC1 + HR-1C3RB + OP-88081 + OP-87530 + OP-99032 are required.

OPEN FIELD NETWORK SUPPORT

FIXED-TYPE READERS HOST

SR-700 BL-1300 BL-700 BL-180 TCP/IP PC

HANDHELD-TYPE READERS

N-L20

PLC

HR-100 HR-100B BL-N70

23 SR-G100 Ultimate Handheld Model with innovative multi-function button

NEW ALGORITHM FOR HANDHELD DPM CODE READER Code correction algorithms, developed for the SR-1000 Series of fixed mount code readers, have been optimised specifically for use with handheld code readers. This allows an ideal balance between reading consistency and speed. Distorted codes on Codes marked on Codes marked on surfaces with curved surfaces machined surfaces projections and depressions

BUILT-IN FUNCTION BUTTON EASILY CUSTOMISABLE SETTINGS PRESS Automatic tuning is done just by pushing the function button and reading a code. Use the device on site without the need to carry around a PC.

Assess stability of reading and communication • Reading rate testing • Radio wave testing

MULTI-LIGHTING CONTROL FUNCTION AUTOMATIC SELECTION OF OPTIMAL LIGHTING HAIRLINE Polarised illumination Multi-angle lights + partial lighting

CYLINDER

DPM ON Glare removal from metal, black resin, etc. Enabled for DPM on metals including cylinders CAST and cast surfaces SURFACE

24 ERGONOMIC SHAPE THAT ENCOURAGES OPTIMAL POSITIONING CENTRE-OF-GRAVITY DESIGN By naturally inducing flat positioning, the SR-G100 reduces the need to worry about variations between users as well as variations in code marking styles. This makes it possible for anyone to perform stable reading. 90º

USB CONNECTION

Handheld DPM Code Reader Communication unit (USB) SR-G100 SR-UB1 PC USB USB keyboard USB COM

RS-232C, ETHERNET CONNECTION

PLC Handheld DPM Code Reader Communication unit OUT signal SR-G100 (Ethernet & RS-232C) SR-LR1 RS-232C HMI [Touch panel] Ethernet

PC • 24 VDC • AC adapter (OP-88020*) PLC link, TCP/IP, FTP

Rechargeable SR-G100 cable AC adapter 4-in-line charging unit battery pack SR-PU1 OP-88020* SR-CG14* (Approx. 1.2 m) SR-B1 (Approx. 2.5 m) (incl. OP-88020)

Holder USB cable Setup software SR-HL1 OP-51580 SR-H6W Supports both flat and SR-G100/SR-LR1 wall-mounted positions for setup

* A separate AC cable is required with OP-88020 and SR-CG14 products.

OP-99062 (UK) OP-99032 (Germany, France, Italy, Belgium) OP-99022 (USA, Canada) AC CABLE LIST OP-99042 (China) OP-99102 (Mexico) OP-99112 (Thailand) OP-99012 (Japan)

25 HR-100 Series Handheld 1D and 2D Code Reader

EASY CODE DETECTION INSTANT DECODING WIDE READING AREA & FASTER READING SPEED WIDE AREA Thanks to a wide reading area and a large depth of field, the code area is easily 265 × 195 mm captured at the push of a button. Furthermore, a high-speed reading that is faster than the conventional handheld readers is provided. LARGE READING DEPTH READING CAPABILITIES 380 mm Type Wireless Wired

Standard HR-100 HR-100 Hi-Resolution HR-101 HR-101

SYSTEM CONFIGURATION

OP-87530*1 (AC adapter) HOST OPTION SETUP SOFTWARE RS-232C HR-1C3RB + OP-99032*2 (AC cable) + HR-B1 HR-1C3UN USB-HID HR-100B HR-1C3UC HR-101B USB-COM OP-87531 OP-87532 HR-H1WE HR-UC1 HR-1C5UC (Holder) (Flexible arm stand) PC

OP-87530*1 (AC adapter) HR-100B/101B MODEL-SPECIFIC OPTIONS RS-232C HR-1C3RC + OP-99032*2 (AC cable) HR-UC1 (Communication Unit) HR-PU1 HR-B1 OP-87530*1 (AC adapter) (Desktop holder) (Battery pack) HR-100 PS/2 HR-1C3VC + PLC HR-101 OP-99032*2 (AC cable)

*1 *2 OP-87530 and OP-99032 are changed by each country

Communication cable

Model HR-1C3UN HR-1C3UC HR-1C5UC HR-1C3RC*1 HR-1C3VC*1 HR-1C3RB*2

Appearance

Cable type Straight Curled Cable length Approx. 3 m Approx. 5 m Approx. 3 m Interface USB RS-232C PS/2 keyboard RS-232C Connector USB (type A) D-sub 9-pin (female) Mini-DIN 6-pin D-sub 9-pin (female) *1. Only for use with HR-100/101 (wired type) *2. Only for use with HR-100B/101B (wireless type)

26 BL-N70 Series Laser Handheld Barcode Reader

Easy to use barcode reader, with minimal setup requirements. Plug-and-play for most applications. Various communication models are available to connect with different PC or PLC systems. Easy setup codes can enable or disable different barcode types. Data output and communication settings can be changed to match existing systems.

SEVERAL CONNECTION TYPES DEPENDING ON APPLICATION

Transmitting bar code data is as easy as connecting the reader to a PC. There is no need for a special power supply or software.

USB PS2 RS-232C

MODEL LINEUP BL-N70UBE BL-N70VE BL-N70RKE USB Keyboard Interface Type PS/2 Keyboard Input Type RS-232C type for connection to DV-90 or N-L20. This runs on 5 VDC power supply on D-sub 9 connector.

OPTION Special holder for BL-N70 Series OP-77470

OP-77470 Table top stand

OP-77466 Replacement cable for keyboard interface

OP-77467 Replacement cable for USB

OP-77469 Replacement cable for RS-232C to KEYENCE

27 Autofocus 1D and 2D Code Reader SR-1000 Series

SPECIFICATIONS

Main unit Model SR-1000 SR-1000W SR-1000 + SR-10AH Type Standard type Wide-field type When the high resolution lens attachment is used Sensor CMOS Image Sensor Receiver Number of pixels 1280 × 1024 pixels Illumination light source High intensity red LED Light emitter Pointer light source High intensity green LED – Focus adjustment Autofocus* 2D QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C) Supported CODE39, ITF, 2of5(Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, symbol Barcode GS1 DataBar, CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode Reading Minimum 2D 0.063 mm 0.082 mm 0.025 mm specifications resolution Barcode 0.082 mm 0.082 mm 0.082 mm Reading distance 110 mm to 1000 mm 50 mm to 600 mm 20 mm to 40 mm 122 × 97 mm 257 × 206 mm Field of view for reading 19 × 15 mm(Typical example at 40 mm) (Typical example at 400 mm) (Typical example at 400 mm) Number of inputs 2 Input type Bidirectional voltage input Control input Maximum rating 26.4 VDC Minimum ON voltage 15 VDC Maximum OFF current 0.2 mA or less Number of outputs 3 Output type Photo MOS relay output Maximum rating 30 VDC I/O Control output Maximum load current 1 output: 50 mA or less, Total of 3 outputs: 100 mA or less specifications Leakage current when OFF 0.1 mA or less Residual voltage when ON 1 V or less Communication standard IEEE 802.3 compliant, 10BASE-T/100BASE-TX Ethernet Supported protocol TCP/IP, SNTP, FTP, BOOTP, MC Protocol, Omron PLC link, KV STUDIO, EtherNet/IPTM, PROFINET Communication standard RS-232C compliant Serial Transmission speed 9600, 19200, 38400, 57600, 115200 bps communication Supported protocol No-protocol, MC Protocol, SYSWAY, KV STUDIO USB Communication standard USB 2.0 Full Speed compliant Enclosure rating IP65 Ambient temperature 0 to +45°C Ambient storage temperature −10 to +50°C Environmental Relative humidity 35 to 85% RH (No condensation) resistance Storage ambient humidity 35 to 85% RH (No condensation) Ambient luminance Sunlight: 10000 lux, Incandescent lamp: 6000 lux, Fluorescent lamp: 2000 lux Operating environment No dust or corrosive gas present Vibration 10 to 55 Hz Double amplitude 0.75 mm, 3 hours each in X, Y and Z directions Power voltage 24 VDC ±10% Rating Current consumption Approx. 700 mA Weight Approx. 200 g Approx. 250 g * The focal position can be adjusted automatically during installation. • SR-1000N and SR-1000WN are available as supported models for India.

DIMENSIONS

Unit: mm

Main unit 4 × M4 Adjustable52 bracket 47 4 × M4 50.5 52 Depth: 5 47 47 33 50.5 SR-1000/1000W 38.5 2.6 Depth: 5 OP-8786647 33 28 38.5 2.6 23.5 28 ° 10° 28 23.5 10 28 10° 10° 20.5 17 20.5 5.3 20.5 17 20.5 5.3 28 Centre of scanner 28 47 28 Centre of scanner R32 28 47 R32 74 7.5 74 120 123 120 7.5 120 ø5.3 120 152 123 123 13 ø5.3 123 152 2 2 13 180 (5) 180 (5)

18.9 18.9 47.6 47.6

High resolution Reflector attachment Adjustable bracket attachment SR-10AR OP-88002 38.5 58.4 13.5 55.6 61.6 80.6 SR-10AH 26 54 1 49.2 42 67.1

19 19 31 47 98° 30 55

31.6

*A ø12 mm support is required.

28 READING RANGE CHARACTERISTICS [TYPICAL]

SR-1000 FIELD OF VIEW Unit: mm

MINIMUM RESOLUTION Unit: mm Image capture range Image capture range Mounting (1280 × 1024 pixels) (800 × 600 pixels) distance Distance 2D Barcode Distance Width Height Width Height 110 0.063 110 30 24 19 14 110 to 140 0.082 0.082 110 24 140 40 32 25 18 110 to 230 0.14 30 230 68 54 42 32 110 to 300 0.18 0.11 300 90 72 56 42 110 to 400 0.24 0.15 400 122 97 76 57 110 to 600 0.37 0.22 600 185 148 116 87 1000 110 to 1000 0.61 0.37 250 1000 312 250 195 146 312 Unit: mm

SR-1000W FIELD OF VIEW Unit: mm MINIMUM RESOLUTION Unit: mm Image capture range Image capture range Mounting Distance 2D Barcode (1280 × 1024 pixels) (800 × 600 pixels) distance 50 0.082 Distance Width Height Width Height 0.082 50 to 100 0.14 50 35 28 22 16 0 28 100 67 54 42 31 50 to 150 0.20 0.12 35 50 to 230 0.30 0.18 150 99 79 62 46 50 to 300 0.38 0.23 230 150 120 93 70 50 to 400 0.51 0.31 300 194 155 121 91 400 257 206 161 120 00 50 to 600 0.76 0.45 307 600 384 307 240 180 384

Unit: mm

SR-1000 + SR-10AH

MINIMUM RESOLUTION FIELD OF VIEW Unit: mm Mounting Unit: mm Image capture range Image capture range distance (1280 × 1024 pixels) (800 × 600 pixels) Distance 2D Barcode Distance Width Height Width Height 20 0.025 0 9 20 11 9 7 5 11 20 to 30 0.03 0.082 30 15 12 9 7 20 to 40 0.04 40 19 15 11 8 0 15 19 Unit: mm

29 PoE & Compact 1D and 2D Code Reader SR-750 Series

SPECIFICATIONS

Main unit Model SR-750HA SR-750 SR-751 SR-752 SR-752 + SR-75L4 SR-752 + SR-75L6 Type High-resolution type Close-range type Middle-range type Long-range type With 400 mm lens With 600 mm lens Sensor CMOS Image Sensor Receiver Number of pixels 752 × 480 pixels Lighting Light source Red LED Light source Visible semiconductor laser, Wavelength 660 nm Output 60 μW Laser pointer Pulse duration 200 μs Laser class Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*2) 2D QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C) Supported CODE39, ITF, 2of5(Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, symbol Barcode *1 GS1 DataBar, CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII Minimum 2D 0.082 mm 0.127 mm 0.19 mm 0.19 mm 0.33 mm 0.5 mm resolution Barcode – 0.127 mm 0.127 mm 0.17 mm 0.22 mm 0.33 mm

DataMatrix 22 to 50 mm 40 to 80 mm 45 to 165 mm 180 to 305 mm 300 to 490 mm 460 to 690 mm Reading QR (Cell size = 0.25 mm) (Cell size = 0.25 mm) (Cell size = 0.5 mm) (Cell size = 0.5 mm) (Cell size = 0.5 mm) (Cell size = 0.5 mm) specifications Reading distance (typical 30 to 100 mm 45 to 195 mm 180 to 330 mm 250 to 540 mm 400 to 760 mm examples) Barcode – (Narrow bar width (Narrow bar width (Narrow bar width (Narrow bar width (Narrow bar width = 0.33 mm) = 0.5 mm) = 0.5 mm) = 0.5 mm) = 0.5 mm)

Focal distance 38 mm 60 mm 100 mm 250 mm 400 mm 600 mm Field of view (at focal distance) 26 × 17 mm 42 × 27 mm 70 × 45 mm 65 × 41 mm 108 × 69 mm 165 × 106 mm Number of inputs 2 Input type Bidirectional voltage input Control input Maximum rating 26.4 VDC Minimum ON voltage 15 VDC Maximum OFF current 0.2 mA or less Number of outputs 3 Output type Photo MOS relay output Maximum rating 30 VDC I/O specifications Control output Maximum load current 1 output: 50 mA or less, Total of 3 outputs: 100 mA or less Leakage current when OFF 0.1 mA or less Residual voltage when ON 1 V or less Communication standard 10BASE-T/100BASE-TX Ethernet Supported protocol TCP/IP, FTP, SNTP, BOOTP, EtherNet/IPTM, PROFINET, MC protocol, KV STUDIO Communication standard RS-232C compliant Serial Transmission speed 9600, 19200, 38400, 57600, 115200 bps communication Supported protocol No-protocol, MC protocol, SYSWAY, KV STUDIO Enclosure rating IP65 Ambient temperature 0 to 45°C Ambient storage temperature -10 to +50°C Environmental Relative humidity 35 to 95% RH (No condensation) resistance Storage ambient humidity 35 to 95% RH (No condensation) Ambient luminance Sunlight: 10000 lux, Incandescent lamp: 6000 lux, Fluorescent lamp: 2000 lux Operating environment No dust or corrosive gas present Vibration 10 to 55 Hz Double amplitude 1.5 mm/55 to 500 Hz: Acceleration 5G, 3 hours each in X, Y and Z directions Power voltage*3 Control port: 24 VDC ±10% or Ethernet port: PoE TypeA/B 36 to 57 V (Cannot supply at the same time) Rating Current consumption Control port: 220 mA (When 24 VDC power supply is used) Ethernet port: PoE Power Class 2*4 Weight Approx. 160 g Approx. 175 g Approx. 185 g *1 Barcodes fitted into the visual field range in size can be read. *2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *3 To comply with CSA No.61010-1/UL61010-1/IEC61010-1, use a power supply: - one that provides Class 2 output as defined in the CEC and NEC, or - one that has been evaluated as a Limited Power Source as defined in CAN/CSA-C22.2 No.60950-1/UL60950-1/IEC60950-1. *4 Peak operating current for PoE Power Class 2: 210 mA maximum. • PROFINET is a trademark or registered trademark of PROFIBUS International. • EtherNet/IPTM is a trademark or registered trademark of ODVA.

30 DIMENSIONS

Main unit Unit: mm SR-750/751/750HA SR-752 With cable Ethernet plug assembly 34.3 42.1 OP-87362 30.8 39.1 1. 2 1. 2 (46.5) 15° 15° 13.2 11.1

M12 ø15 65 65

(114) (110)

(145) (142)

17.6 17.6

37.5 46.4

Mounting bracket Long-focal distance lens SR-75L4/75L6 33 54.6 16.2 42.7 Insulating 10° 10° sheet 31.1 42.1 Dimension for (7.5) 5.3 the screw holes. 11.1 R32 33.9 47 15° 70.5

7.5 2-M4 ø5.3 (10.5) 2 (2.5) 20 (5.5) (51)

(52.5) 49.2

READING RANGE CHARACTERISTICS [TYPICAL]

Reading distance Reading Unit: mm 20 15 10 5 0 -5 -10 -15 -20 40 30 20 10 0 -10 -20 -30 -40 SR-750HA: High-resolution type SR-750: Close-range type distance 60 Unit: mm Unit: mm Unit: mm B Cell size 100 B Code type Cell size A B Code type A B Narrow bar width 0.08 31 39 40 DataMatrix 0.127 50 70 DataMatrix 0.127 27 42 QR 0.25 40 80 QR 0.25 22 50 0.127 46 74 Code39 50 Focal A 0.33 30 100 20 distance Code128 0.25 34 90 Focal 38 mm distance A 60 mm

0 0

Reading 80 60 40 20 0 -20 -40 -60 -80 Reading 40 30 20 10 0 -10 -20 -30 -40 SR-751: Middle-range type distance SR-752: Long-range type distance Unit: mm Unit: mm B Unit: mm Unit: mm Cell size 200 Cell size 300 Code type A B B Code type A B Narrow bar width Narrow bar width 0.25 65 130 0.19 220 260 DataMatrix 150 250 QR 0.5 45 165 DataMatrix 0.25 210 270 0.127 75 110 QR 0.33 200 280 Code39 100 200 0.5 45 195 0.5 180 305 Focal A Code128 0.25 50 150 0.17 220 260 distance Focal Code39 250 mm 50 distance A 0.5 180 330 150 100 mm Code128 0.25 195 275

0 0

Reading 100 75 50 25 0 -25 -50 -75 -100 Reading 150 100 50 0 -50 -100 -150 SR-752 + SR-75L4 (400 mm lens) distance SR-752 + SR-75L6 (600 mm lens) distance Unit: mm Unit: mm Unit: mm Unit: mm B 600 800 Cell size Cell size Code type A B B Code type A B Narrow bar width Narrow bar width 500 DataMatrix 0.33 350 450 DataMatrix 0.5 460 690 600 QR QR 0.5 300 490 400 1 330 860 0.22 370 440 0.33 500 690 Code39 Code39 400 0.5 250 540 0.5 400 760 300 Focal A Code128 0.25 350 450 Focal Code128 0.33 500 690 distance A 600 mm distance 200 200 400 mm

0 0

31 Ultra Compact 1D and 2D Code Reader SR-700 Series

SPECIFICATIONS

Main unit Model SR-700HA SR-700 SR-710 Type High-resolution type Close-range type Middle-range type Light source Visible semiconductor laser (Wavelength: 660 nm) Output 60 μW Laser pointer Pulse duration 200 µs Laser class Class 1 Laser Product (IEC60825-1, FDA (CDRH) Part 1040.10*1) Lighting Light source High intensity red LED CODE39, ITF, 2of5 (Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, Barcode *2 Supported JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, Pharmacode code 2D code QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A, CC-B, CC-C) Minimum Barcode − 0.127 mm 0.127 mm resolution 2D code 0.082 mm 0.127 mm 0.19 mm 30 to 100 mm 45 to 195 mm Reading Reading Barcode − distance (Narrow bar width = 0.33 mm) (Narrow bar width = 0.5 mm) (typical 22 to 50 mm 40 to 80 mm 45 to 165 mm 2D code examples) (Cell size = 0.25 mm) (Cell size = 0.25 mm) (Cell size = 0.5 mm) Focal distance 38 mm 60 mm 100 mm Field of view 26 mm × 17 mm 42 mm × 27 mm 70 mm × 45 mm (Typical example at focal distance) Control input 2 inputs (IN1 and IN2), non-voltage input (contact, solid-state) 4 NPN open collector outputs (OUT1 to 4) Control output 30 mA or less (24 V or less) I/O Residual voltage 0.8 V or less, leakage current 0.1 mA or less Transmission speed 9600, 19200, 38400, 57600, 115200 bps RS-232C Supported protocol No-protocol, MC protocol, SYSWAY, KV STUDIO USB USB 2.0 Full Speed compliant Enclosure rating IP65 Ambient temperature 0 to +45°C Ambient storage temperature -10 to +50°C(No freezing) Environmental Relative humidity 35 to 95% RH (No condensation) resistance Ambient luminance Sunlight: 10000 lux, Incandescent lamp: 6000 lux, Fluorescent2-M3 lamp: 2000 lux Operating environment No dust or corrosive gas presentDepth (27.8) 24 4 mm Centre of Vibration 10 to 55 Hz Double amplitude 1.5 mm, 3 hours each in X, Y and3.5 Z directions24.3 scanner 13.2 2-(R2.65) Power voltage 5 VDC +5%, -10% Rating 3.5 R1.5 R18 7 C1 Current consumption 630 mA or less Dimensions of the screw holes Weight Approx. 160 g (including cable) 18.5 40° 40° 18.5 *1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. 2-M4 27.5 *2 Barcodes fitted into the visual field range in size can be read. (36.5)33 40 ø5.3 18 5.3

ø5 DIMENSIONS 3.8 32 9.3 11 Unit: mm 3.5 24.3 32 1.5 3.5 0.7 0.7 2-R1.5

2-M3 MOUNTING BRACKET MAIN UNIT HEAD CABLE 8-(R1.65) Depth (27.8) 24 4 mm SR-700/710/700HACentre of 4-3.3 3.5 24.3 scanner 13.2 2-(R2.65) 33 Cord length 1800 3.5 R1.5 R18 7 C1 60.8 2-M3 Cord length 200 Dimensions of the screw holes 53 Depth (27.8) 24 4 mm Centre of 18.5 40° 90° ±1.5° 3.5 24.3 scanner 13.2 40° 2-(R2.65)18.5 2-M4 27.5 (36.5) 21 Thickness 13 33 3.540 R1.5 R18 7 C1 6 ø5.3 Dimensions of the screw holes Cord length 130 0.7 6 18 5.3 18.5 40° USB for setting, Type A male (for PC connection) 40° 18.5 2-M4 27.5 (36.5) 33 ø5 40 ø5.3 3.8 18 5.3 32 9.3 11 3.5 24.3 32 1.5 0.7 0.7 2-R1.5 ø5 3.5 3.8 32 9.3 11 8-(R1.65) 4-3.3 3.5 24.3 32 33 1.5 3.5 0.7 0.7 2-R1.5 Cord length 1800 60.8 Cord length 200 53 8-(R1.65) 4-3.3 90° ±1.5° 33 21 Thickness 13 Cord length 1800 60.8 Cord length 200 6 Cord length 130 53 0.7 6

USB for setting, Type A male (for PC connection) 90° ±1.5°

21 Thickness 13 6 Cord length 130 0.7 6

USB for setting, Type A male (for PC connection)

32 READING RANGE CHARACTERISTICS [TYPICAL]

SR-700 Reading 40 30 20 10 0 -10 -20 -30 -40 Unit: mm distance Unit: mm Cell size Code type A B Narrow bar width 100 B 0.127 50 70 2D 0.25 40 80

0.127 46 74 50 Barcode Focal 0.33 30 100 distance 60 mm A

SR-710 Reading 80 60 40 20 0 -20 -40 -60 -80 Unit: mm distance Unit: mm Cell size Code type A B Narrow bar width 200 B 0.25 65 130 2D 150 0.5 45 165

0.127 75 110 100 Barcode Focal 0.5 45 195 distance 50 100 mm A

SR-700HA Reading 20 15 10 5 0 -5 -10 -15 -20 Unit: mm distance Unit: mm Code type Cell size A B 50 B

0.08 31 39 40 2D 0.127 27 42

0.25 22 50 Focal distance A 20 38 mm

33 Ultra-Compact Digital Barcode Reader BL-1300 Series

SPECIFICATIONS

Main unit Model BL-1300 BL-1301 BL-1300HA BL-1301HA Type Standard High-resolution Read direction Front Light source Visible-light semiconductor laser (660 nm wavelength) Output 85 μW Pulse duration 112 μs Laser class Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1) Scanning method Single Raster Single Raster Focal distance 120 mm 90 mm Reading distance 65 to 500 mm *2 (1.0 mm narrow bar width) 45 to 270 mm *2 (0.5 mm narrow bar width) Readable bar width 0.125 mm 0.08 mm Largest readable label width 339 mm*2 (350 mm distance, 1.0 mm narrow bar width) 189 mm*2 (189 mm distance, 0.5 mm narrow bar width) PCS 0.4 or more Scanning rate 500 to 1300 scans/second

Model BL-1350HA BL-1351HA BL-1370 BL-1371 Type High-resolution side Long-distance Read direction Side Front Light source Visible-light semiconductor laser (660 nm wavelength) Output 85 μW Pulse duration 112 μs Laser class Class 2 Laser Product (IEC60825-1, FDA (CDRH) Part1040.10*1) Scanning method Single Raster Single Raster Focal distance 65 mm 230 mm Reading distance 40 to 250 mm*2 (0.5 mm narrow bar width) 160 to 600 mm*2 (1.0 mm narrow bar width) Readable bar width From 0.08 mm From 0.15 mm Largest readable label width 201 mm*2 (175 mm distance, 0.5 mm narrow bar width) 404 mm*2 (420 mm distance, 1.0 mm narrow bar width) PCS 0.4 or more Scanning rate 500 to 1300 scans/second

Supported barcodes CODE39, ITF, 2of5(Industrial 2of5), COOP2of5, NW-7(Codabar), CODE128, GS1-128, CODE93, JAN/EAN/UPC, GS1 DataBar Number of readable digits 74 digits (148 digits with CODE128 start character C) Enclosure rating IP65 Operating ambient illumination Sunlight: 10000 lux, Incandescent lamp: 6000 lux Operating ambient temperature 0 to 45˚C Environmental Storage ambient temperature -20 to +60˚C resistance Operating ambient humidity 35 to 85% RH, No condensation Operating environment No dust or corrosive gas Vibration resistance 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively Power supply 5 VDC ±5% Rated values Current consumption 400 mA max. Weight Approx. 130 g Approx. 115 g *1 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50. *2 Specifications for 500-scan/second operation • Use the Limited Power Source defined in UL/IEC60950-1 to comply with UL/IEC60950-1. • Internal body settings are written in the internal memory area (can be rewritten 100000 times).

I/O specifications Input terminals 2 inputs (IN1, IN2), non-voltage input (contact or solid-state) Output format 4 (OUT1 through OUT4), NPN open collector Output Rated load 24 VDC, 30 mA terminals OFF leak current 0.1 mA max. ON residual voltage 0.5 V max. Communication standard Conforms to EIA, RS-232C Baud rates 600/1200/2400/4800/9600/19200/31250/38400/57600/115200 bps Serial Synchronisation method Start/stop synchronisation interface Data bit length 7/8 bits Stop bit length 1/2 bits Parity check None/Even/Odd

34 DIMENSIONS BL-1300/1301/1300HA/1301HA/1370/1371 (front type) Unit: mm

10° 5° 2-M4 Mounting A (front type) Mounting B (front type) 3.5 19 22.5 21 Scan centre 2 - M3 depth 4 Laser beam 15° 6.5 2-R 2.65 7.8 3 Laser 2-M4 15° 43.6 beam 33 40 6 29.8 23.5 59.6 29.3 Laser beam 40 5.3 43.4 5.5 R19 5° 38.7 32.7 10° 26.5 26.5 28.0 19.6 2.2 16.0 3.5 15 (min.) 14 2.2 11.4 3.8 9 3 ø 4.2 3 2-R 2.75 2-R 2.65 5.3 31 5.5 11.5 14.6 Cord length: 2 m 2-R 2.75 25 49.4 37.6

READING DISTANCES

-100101 (standard type) -170171 (long-distance type) Unit: mm

200 100 0 100 200 200 100 0 100 200 200 100 0 100 200 200 100 0 100 200

339 306 404 339 124 124 227 227 180 600 500 500 400 400 E E D 300 300 E C D E B D A D C 200 200 C B C B A distance distance 100 100 230 mm 230 mm Focal Focal distance l distance 120 mm 120 mm Focal Foca 0 0 500 scans 1300 scans 500 scans 1300 scans

R R R R 00 100 00 100 A CODE39 0.125 85 to 140 A CODE39 0.15 205 to 250 CODE39 0.19 80 to 220 80 to 150 CODE39 0.19 190 to 330 CODE39 0.25 65 to 280 60 to 200 CODE39 0.25 180 to 380 190 to 230 CODE39 0.5 65 to 400 60 to 360 CODE39 0.5 170 to 500 160 to 400 CODE39 1.0 65 to 500 60 to 450 CODE39 1.0 160 to 600 160 to 500 Measurement conditions: Standard KEYENCE barcode (narrow/wide bar ratio of 1:2.5); Measurement conditions: Standard KEYENCE barcode (narrow/wide bar ratio of 1:2.5); Mounting conditions: 15° skew, 0° pitch, 0° tilt Mounting conditions: 15° skew, 0° pitch, 0° tilt

-100HA101HA (high-resolution front type) -10HA11HA (high-resolution side type)

100 50 0 50 100 100 50 0 50 100 100 50 0 50 100 100 50 0 50 100

189 182 201 194 96 96 96 96 68 68 72 72 250 250 200 200 E E E 150 150 E D C D D C B C D 100 100 C B B A B A 50 50 distance distance 90 mm 90 mm distance distance 65 mm 65 mm Focal Focal Focal Focal 0 0 500 scans 1300 scans 500 scans 1300 scans

R R R R 00 100 00 100 A CODE39 0.08 65 to 80 A CODE39 0.08 45 to 60 CODE39 0.125 60 to 140 55 to 90 CODE39 0.125 40 to 120 45 to 75 CODE39 0.19 50 to 190 55 to 140 CODE39 0.19 40 to 170 45 to 120 CODE39 0.25 45 to 210 55 to 170 CODE39 0.25 40 to 190 45 to 150 CODE39 0.5 45 to 270 55 to 260 CODE39 0.5 40 to 250 45 to 240 Measurement conditions: Standard KEYENCE barcode (narrow/wide bar ratio of 1:2.5); Measurement conditions: Standard KEYENCE barcode (narrow/wide bar ratio of 1:2.5); Mounting conditions: 15° skew, 0° pitch, 0° tilt Mounting conditions: 15° skew, 0° pitch, 0° tilt

35 DIMENSIONS Unit: mm BL-1350HA/1351HA (side type) Mounting (side type) 3.5 Scan centre 22 21 2-M4 36 21 1.6

5.5 36 5.3 3 2-R 2.65 2-R 2.65 48 3 Laser 15° 38.1 5.3 67.6 beam 23.5 11 38.5 2 - M3 21 18.7 18.7 17.6 depth 4 15 (min.) 3.8 19.6 3.5 2.2 ø 4.2 11.5 Cord length: 2 m 15° 41.6 48 6.5 41.6 Laser beam 48

Long Distance Laser Barcode Reader BL-700 Series

SPECIFICATIONS

Main unit Model BL-700 BL-701 BL-740 BL-741 BL-780 BL-781 Type High-resolution Middle-range Long-range Scanning method *1 Single Raster Single Raster Single Raster Light source Visible semiconductor laser (Wavelength: 655 nm) Output 100 μW Pulse duration 50 μs (FDA (CDRH) Part1040.10), 99.5 μs (IEC60825-1) Laser class Class II Laser Product (FDA (CDRH) Part1040.10), Class 2 Laser Product (IEC6085-1) 160 to 370 mm 150 to 750 mm 200 to 1200 mm Reading distance (When narrow bar width is 0.5 mm) (When narrow bar width is 1.0 mm) (When narrow bar width is 2.0 mm) Reading bar width *2 0.15 to 1.0 mm 0.25 to 2.0 mm 0.32 to 2.0 mm 310 mm 600 mm 1010 mm Largest readable label width *3 (When reading distance is 335 mm) (When reading distance is 680 mm) (When reading distance is 1080 mm) PCS 0.6 or more (Reflectance of white part: 75% or more) Scanning rate 700 scans/sec Target code CODE39, ITF, 2of5(Industrial 2of5), COOP2of5, NW-7(Codabar), CODE128, GS1-128, CODE93, JAN/EAN/UPC Number of readable digits 32 digits max. *4 Trigger input Non-voltage input (contact, solid-state), TTL input is also possible. Applied standard RS-232C Synchronisation Start-stop Transmission code ASCII Serial Baud rate 600/1200/2400/4800/9600/19200/31250/38400 bps interface Data length 7/8 bits Parity check None/Even/Odd Stop bit length 1 bit/2 bits Output form NPN OK/NG Rated load 24 VDC, 30 mA output Leakage current (at OFF) 0.1 mA max. Residual voltage (at ON) 0.5 V max. Enclosure rating IP65 Sunlight: 10000 lux, Sunlight: 10000 lux, Sunlight: 8000 lux , Ambient light Incandescent lamp: 6000 lux Incandescent lamp: 4000 lux Incandescent lamp: 3000 lux Environmental Ambient temperature 0 to 40°C, No condensation resistance Relative humidity 35 to 85%, No condensation Operating atmosphere No dust or corrosive gas present Vibration 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively Power supply voltage 5 VDC ±5% Power rating Current consumption 510 mA max. Weight Approx. 300 g (including cable) *1 BL-701 raster width: 10 ±1 mm (reading distance: 200 mm) BL-741 raster width: 20 ±2 mm (reading distance: 300 mm) BL-781 raster width: 30 ±3 mm (reading distance: 450 mm) *2 When the barcode type is CODE39. *3 Largest reading label width includes the barcode margin (quiet zone). *4 When start/stop character of CODE128 is CODE-C, up to 64 digits are allowed. • The internal BL settings are written to the built-in EEPROM (erasable up to 100000 times).

36 DIMENSIONS Unit: mm BL-700 Series

53 (A)

28.5

ø5.8 Laser beam Cable length 1.8 m

10° ( ) * Laser transmitter 2 - ø3.5 9.9 mounting hole

58 51.5

26.5

36 3.25 46.5 3.25 * The laser beam radiates at 10 ±0.5° perpendicular to side (A).

READING DISTANCES

Unit: mm BL-700/701 BL-740/741 BL-780/781

R 600 500 400 300 200 100 0 100 200 300 400 500 600 R 400 300 200 100 0 100 200 300 400 1010 900 600 700 R 510 435 200 100 0 100 200 430 465 350 400 330 1200 310 348 275 300 1100 270 750 254 210 215 650 185 870 370 550 325 320 490 300 440 275 D C B A E 580 D C E B A 360 D C B A 205 330 480 190 185 175 160 400 230 320

(Focal distance) 150

500 200

230

(Focal distance) (Focal distance)

(Measuring conditions) (Measuring conditions) (Measuring conditions) A 0.15 mm • The KEYENCE standard A 0.25 mm • The KEYENCE standard A 0.32 mm • The KEYENCE standard barcode is used. barcode is used. barcode is used. 0.19 mm 0.32 mm 0.5 mm • Skew: 0° • Skew: 0° • Skew: 0° 0.25 mm 0.5 mm 1.0 mm • Pitch: 0° • Pitch: 0° • Pitch: 0° 0.5 mm 1 mm 2.0 mm 1 (EAN) • Tilt: 0° 1 (EAN) • Tilt: 0° • Tilt: 0° • Ratio 1:2.5 • Ratio 1:2.5 • Ratio 1:2.5 • Including the margins • Including the margins • Including the margins

37 CCD Barcode Reader BL-180 Series

SPECIFICATIONS

Main unit Model BL-180 BL-185 Model (with connector) BL-180SO (7030) BL-185SO (7031) Reading direction Front Side Light source/Light receiving element LED/CCD image sensor Scanning distance 33 ±10 mm *1 (Using narrow bars of at least 0.19 mm in width) Readable bar width *2 0.125 to 1.0 mm Largest readable label width 80 mm *3 (Using narrow bars of at least 0.19 mm in width) PCS 0.45 or more (Reflectance of white part: 75% or more) Scanning rate 500 scans/sec Target code CODE39, ITF, 2of5(Industrial 2of5), COOP2of5, NW-7(Codabar), CODE128, JAN/EAN/UPC Number of readable digits 32 digits Trigger input Non-voltage input (contact or solid-state), TTL input is also possible. Applied standard RS-232C Synchronisation Start-stop Transmission code ASCII Serial Baud rate 600/1200/2400/4800/9600/19200/31250/38400 bps interface Data length 7/8 bits Parity check None/Even/Odd Stop bit length 1 bit/2 bits Output form NPN OK/NG Rated load 24 VDC, 100 mA output Leakage current (at OFF) 0.1 mA max. Residual voltage (at ON) 0.5 V max. Ambient light Sunlight, Incandescent lamp: 10000 lux, Fluorescent lamp: 3000 lux. Ambient temperature 0 to 40°C, No condensation Environmental Relative humidity 35 to 85%, No condensation resistance Operating atmosphere No dust or corrosive gas present Vibration 10 to 55 Hz, 1.5 mm double amplitude in X, Y, and Z directions, 2 hours respectively Power supply voltage 5 VDC ±5% *4 Power rating Current consumption 300 mA max. Weight Approx. 165 g Approx. 180 g *1 33 ±5 mm when the narrowest bar is less than 0.19 mm. *2 Readable bar width indicates the range of the narrowest readable bar. *3 60 mm when the narrowest bar is less than 0.19 mm. *4 Use a stable power supply of 5 VDC ±5%. The BL-U2 special power unit is available as an option. •The internal BL settings are written to the built-in EEPROM (erasable up to 100000 times).

DIMENSIONS READING DISTANCES

Unit: mm BL-180 Series BL-180/185

B Front-view type Side view type A 53 4 (A) 4 2 × 2-M3 2 × 2-M3 28.5 Depth 5 mm or less Depth 5 mm or less 26 15 36 10 17 6 ø5.8 47 20 55 20 Laser beam Cable length 1.8 m 80 80 60 80 10° 55 55 ( * )

Laser transmitter e labe l width) e labe l width) R 2 - ø3.5 L-180 SAL 9.9 mounting hole (Readabl (Readabl 5 ø10 37 ø10 ø4.5 5 6 ø4.5 33 10 Receiver axis 33 29 Cable length 10 Cable length 10 10 10 1.8 m 12.5 1.8 m 58 51.5 15.3 33 R 26.5 5 5 Receiver axis 4 4 26 17 15 36

36 46.5 3.25 3.25 * The laser beam radiates at 10 ±0.5° perpendicular to side (A). A Less than 0.19 0.19 Min.

(Measuring conditions) • The KEYENCE standard barcode is used. • Skew: -10° • Pitch: 0° • Tilt: 0°

38 AutoID Data Controller DV-90 Series

SPECIFICATIONS

Main unit Model DV-90NE (NPN output), DV-90PE (PNP output) Applicable barcode reader SR-1000/750/700/G100*1, BL-1300/700/600/180/N70RKE, HR-100*2 Registered preset data number 900 max. Memory backup Flash ROM (Rewritable: 100000 times) Input (4 points) Rated input voltage 10 to 26 VDC, 10 mA, Class 2 • Trigger input (2 points) • Unlock input Maximum OFF current 1.0 mA • Remote input Output (16 points) DV-90NE: NPN Open-collector I/O terminal Output form • Out 1 through 12 DV-90PE: PNP Open-collector • OK output Rated load 30 VDC, 100 mA • NG output • Read error output Leakage current at OFF 0.1 mA max. • Quality error output Residual voltage at ON Less than 1 V Applied standards RS-232C PORT1 Synchronisation Asynchronous (For connecting code reader) Baud rate 600 to 115200 bps Serial Data length 7/8 bits interface PORT2 (For connecting PC, PLC, or code reader) Parity check None/Even/Odd Stop bit length 1 bit/2 bits USB (Special for connecting PC) USB 2.0 (B type) (Communication speed fixed to 115200 bps) 5 VDC ±5%, 1100 mA max. (at the ambient temperature of 0 to 40°C) Power for barcode reader Power output 850 mA max. (at the ambient temperature of 40 to 50°C) Power for sensor 24 VDC ±10%, 250 mA max. Enclosure rating IP65 (only the front panel when panel-mounted) Environmental Ambient temperature 0 to 50°C, No condensation resistance Relative humidity 35 to 85%, No condensation Operating atmosphere No dust or no corrosive gas present Power supply voltage 24 VDC ±10%, Class 2 Power rating Current consumption 850 mA max. Weight Approx. 360 g *1 To connect the SR-1000/750, the OP-87533 and the OP-87527/87528/87529 are required. To connect the SR-G100, SR-LR1,OP-27937 are required *2 To connect the HR-100, the HR-1C3RC/OP-87533 are required. To connect the HR-100B, HR-UC1/HR-1C3RB/OP-88046/OP-99012/OP-88081 are required

DIMENSIONS Unit: mm Panel thickness: 1.6 to 4.0 145.5 6 +1 4-ø3.4 d = 6 135 116.8 (for M4 tapping screw) 0 5.9

52.3 +1 26 85 0 95.5 84.8 26

21.8 5.9

26.8 26 (64.2) 134.8

Multi-Drop Controller N-410 Series

SPECIFICATIONS DIMENSIONS

Unit: mm Main unit Model N-410K Connectable code reader SR-700, BL-1300/700/600/180 Series Trigger Rated input 15 to 26.4 VDC, 10 mA max. 27.327.3 input Max. OFF current 1.0 mA

Applied standards RS-232C RS-232CRS-232C

Synchronisation Start-stop (Full-duplex) SD SD RDRD RS RS CS CS 112112 POWERPOWERTIMINGTIMINGSD SD RDRD Transmission code ASCII 100100 9090 RS-485RS-485 35.435.4 RS-232C Baud rate 9600/19200/38400/57600/115200 bps RS-232CRS-232C Data length 7/8 bits TERMINATOTERMINATOR R ONON Parity check Even/Odd/None OFFOFF Stop bit length 1 bit/2 bits Applied standards RS-485 Synchronisation Start-stop (Full-duplex) Transmission code ASCII 4040 44 × × ø5 ø5 5151 Baud rate 600 to 115200 bps 6060 mountingmounting hole hole RS-485 Data length 7/8 bits Parity check Even/Odd/None Stop bit length 1 bit/2 bits Max. number of 31 connectable units Max. total extension distance 1.2 km Environmental Ambient temperature 0 to 55°C, No condensation resistance Relative humidity 35 to 85%, No condensation Power Power supply voltage 24 VDC (+10%, -20%) rating Current consumption 80 mA max. Weight Approx. 180 g 39 Dedicated Power Supply/Communication Units

SPECIFICATIONS

Model N-R2 N-R4 N-UB N-L20 Power supply for the code reader 5 VDC ±5% (650 mA) Operating surrounding air temperature 0 to 50°C Storage ambient temperature -20 to +60°C Operating ambient humidity 35 to 85% RH, No condensation Operating atmosphere No dust or corrosive gases present

resistance 10 to 55 Hz Vibration amplitude: Environment Vibration resistance 10 to 55 Hz, complex amplitude 1.5 mm, 2 hours in each of X, Y, and Z directions 0.3 mm 2 hours each in X, Y, and Z directions Power voltage 24 VDC (+10%, -20%) Rating Consumption current 380 mA or less Mass Approx. 135 g Approx. 135 g (excluding the connector) Approx. 155 g Approx. 150 g Number of pins 2 (IN1 and IN2) Input format Bidirectional voltage input Input Input maximum rating 26.4 VDC Minimum ON voltage 15 VDC Maximum OFF current 1 mA Number of pins 4 (OUT1 to 4) Output format Photo MOS relay output Terminal block Terminal Output Output rating load 30 VDC, 100 mA* OFF time leak current 0.1 mA or less ON time residual voltage 1 V or less 15 m or less Host interface 1.2 km or less 5 m or less 100 m or less (including the head cable) * Both NPN and PNP input devices are supported.

Model BL-U2 N-42 N-48 Conversion interface — RS-232C RS-422A (Level conversion) RS-232C RS-485 (Level conversion) Connectable barcode reader BL-700/600/180 Series BL-1300/700/600/180 Series, SR-700 Series* Power supply for barcode reader 5 VDC ±5% (630 mA) Input rating 8.5 to 26 VDC, 10 mA max. 15 to 26 VDC, 10 mA max. Trigger input Max. OFF current 1.0 mA RS-485 (Max. number of connectable units: 31) Interface Conforms to RS-232C approved by EIA RS-422A (Max. total extension distance: 1.2 km) (Max. total extension distance: 1.2 km) Power supply voltage 24 VDC, +10%, -20% Power rating Current consumption 250 mA max. 260 mA max. Weight Approx. 80 g Approx. 100 g * To connect the BL-1300 or SR-700, the OP-80616 conversion cable (sold separately) is required. In this situation, the communication baud rate is capped at 38400 bps.

40 DIMENSIONS Unit: mm N-R2 N-R4 44.2 44.2 45 45 41.8 41.8 R40 R40 28.3 28.3

35.8 35.8

122.3 122.3

57.4 4.2 4.2 (128.5) 128.5

44.2 N-L20 52 N-UB 57 41.8

R40

40.3 38.9

35.8 133.8 35.9 113

49.9 R40 4.8 60 3.5 (128.5) (74.2)

2 - ø4.5 5.5 N-42/N-48 mounting hole (148.1)

READER

POWER SD RD

55 43.2 TERMINATOR ON OFF N-48

5.9 5.9 63.2 75 26

2 - ø4.5 5.5 BL-U2 mounting hole

43.2 55

100 to 240 VAC ø6.5, Cable length: 2 m Approx. 40

5.9 63.2 5.9 5.5 98 110 90 75 21 120°

ø4.5 4 mounting hole 4 150 50 186 91 max.

41 Ultimate Handheld Model with capability of handling SR-G100

SPECIFICATIONS

Handheld DPM Code Reader Model SR-G100 Sensor CMOS image sensor Receiver Number of pixels 900 × 900 pixels (2D code), 1280 × 900 pixels (Barcode) Light emitter Illumination light source High-intensity red LED, High intensity blue LED 2D code QR, MicroQR, DataMatrix (ECC200), GS1 DataMatrix, PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C) Supported CODE39, ITF, 2of5(Industrial 2of5), COOP 2of5, NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC, Trioptic CODE39, CODE39 Full ASCII, symbol Barcode Reading Pharmacode specifications Minimum 2D code 0.127 mm resolution Barcode 0.1 mm Focal distance 30 mm Wireless communication Bluetooth Ver. 2.1 + EDR Class 2 Communication Wireless communication distance Approx. 10 m (line-of-sight) specifications Setup communication USB 2.0 Full Speed Enclosure rating IP54 Ambient temperature 0 to +45°C / When charging: 0 to +40°C Ambient storage temperature -10 to +50°C Environmental Relative humidity 35 to 95% RH (No condensation) resistance Ambient storage humidity 35 to 95% RH (No condensation) Ambient light Sunlight: 10000 lux, Incandescent lamp: 6000 lux, Fluorescent lamp: 2000 lux Operating environment No dust or corrosive gas present Drop resistance* 2.0 m, 50 times Rating Power consumption Approx. 8.5 W Dimensions 214 × 78.5 × 97.4 mm Weight Approx. 375 g (incl. rechargeable battery pack) Continuous usage time (Central value) Approx. 10 hours (reading count: 10000) Charging time Approx. 4.5 hours • This is a test value and is not guaranteed.

Communication unit (USB) Model SR-UB1 Wireless communication Bluetooth Ver. 2.1 + EDR Class 2 Communication Wireless communication distance Approx. 10 m (line-of-sight) specifications USB communication USB 2.0 Full Speed Interface USB-COM, USB keyboard Ambient temperature 0 to +45°C Environmental Ambient storage temperature -10 to +50°C resistance Relative humidity 35 to 95% RH (No condensation) Ambient storage humidity 35 to 95% RH (No condensation) Rating Current consumption Approx. 80 mA Dimensions 20.6 × 11.2 × 65.4 mm Weight Approx. 15 g Supported OS Microsoft Windows 8 Professional or later 32bit/64bit (Except for Windows RT), Microsoft Windows 7 Professional or later 32bit/64bit

Communication unit (Ethernet & RS-232C) Model SR-LR1 Wireless communication Bluetooth Ver. 2.1 + EDR Class 2 Wireless communication distance Approx. 10 m (line-of-sight) Communication 9600, 19200, 38400, 57600, 115200 bps RS-232C specifications No-protocol, MC protocol, SYSWAY, KV STUDIO IEEE 802.3, 10BASE-T / 100BASE-TX Ethernet TCP/IP, FTP, MC protocol, Omron PLC link, KV STUDIO, EtherNet/IPTM, PROFINET Number of points 3 Output format Photo MOS relay Control Maximum rating 30 VDC, 100 mA output Leakage current when OFF 0.1 mA or less Residual voltage when ON 1 V or less Ambient temperature 0 to +45°C Environmental Ambient storage temperature -10 to +50°C resistance Relative humidity 35 to 95% RH (No condensation) Ambient storage humidity 35 to 95% RH (No condensation) Rating Power voltage / current consumption 24 VDC ±10% / Approx. 120 mA, or use dedicated AC adapter (12 VDC) / Approx. 230 mA Dimensions 62 × 125.8 × 40 mm Weight Approx. 160 g

AC adapter Model OP-88020 Rated input 100 to 240 VAC, 50/60 Hz Rated output 12 VDC, 1.5 A max. Dimensions 104 × 43 × 31 mm (excl. cable area) Weight Approx. 125 g • Using SR-PU1 or SR-LR1. AC cable required separately.

42 DIMENSIONS Unit: mm

Handheld DPM Code Reader SR-G100 Cable SR-100 SR-1 6.5 34

78.5 53 52.4

39.6 2530 ø10.6

57.9 42 38

97.4 63.4 Connected SR-100 SR-1

214 16

21.5 Holder 247.1 SR-H1 Wall-mounted

66 (134)

18.4 Communication unit (Ethernet & RS-232C) SR-R1 4 × ø4.8 24 125.8 4 × ø4.8 109.7 110 31

62 (214) 52

103.2 (240.4) 5 R33 (14.7) (66)

100

40 11

(137.9) 4-in-line charging unit Horizontal type SR-1 49 1.1 162 40.2 (269.3)

(117.3) 129 107.8

(238.5) 20 158 20 1.1

FIELD OF VIEW FOR READING (TYPICAL)

2D code Barcode

Minimum Minimum Distance Horizontal Vertical Distance Horizontal Vertical resolution resolution 30 0.127 45 45 80 0.25 99 70 70 0.25 65 65 120 0.5 127 90 110 0.5 85 85 200 1 184 129

43 Handheld 1D and 2D Code Reader HR-100 Series

SPECIFICATIONS

Handheld Code Reader Model HR-100 HR-100B HR-101 HR-101B Type Standard High resolution Interface Wired Wireless Wired Wireless Light source Red LED Supported 2D QR, MicroQR, DataMatrix (ECC200), PDF417, MicroPDF417, GS1 Composite (CC-A/CC-B/CC-C), MaxiCode, AztecCode symbol Barcode CODE39, ITF, 2of5(Industrial 2of5), NW-7 (Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC, MSI, Postal, CODE11, 2of5 Reading Minimum 2D 0.169 mm 0.127 mm specifications resolution Barcode 0.127 mm 0.076 mm Reading 2D 15 to 180 mm (Cell size = 0.254 mm) 0 to 114 mm (Cell size = 0.254 mm) distance Barcode 25 to 115 mm (Narrow bar width = 0.127 mm) 0 to 96 mm (Narrow bar width = 0.127 mm) Wireless Standard — Bluetooth version 2.1 — Bluetooth version 2.1 Ambient temperature 0 to 50°C Environmental Relative humidity 5 to 95% RH (no condensation) resistance Ambient light Sunlight: 10000 lux, Fluorescent lamp: 2000 lux Drop impact resistance 1.8 m 50 times on concrete Power voltage 4.0 to 5.5 VDC — 4.0 to 5.5 VDC — Rating Current consumption Reading: 450 mA, Standby: 90 mA — Reading: 450 mA, Standby: 90 mA — Operating time (when using HR-B1)* — Approx. 14 hours — Approx. 14 hours Dimensions 161 × 86 (head) × 71 mm (head) Weight Approx. 150 g Approx. 225 g Approx. 150 g Approx. 225 g *Typical example at 1 scan/s

HR-100B/101B options Model HR-UC1 HR-PU1 Type Communication Unit Desktop holder Wireless Standard Bluetooth version 2.1 - Power voltage 4.5 to 5.5 VDC Rating Current consumption (with AC adapter) 1000 mA Charging time (with AC adapter) Approx. 4.5 hours Dimensions 81 × 132 × 101 mm Weight Approx. 180 g

Laser Handheld Barcode Reader BL-N70 Series

SPECIFICATIONS

Main unit Model BL-N70VE BL-N70UBE BL-N70RKE RS-232C Interface PS2 USB For KEYENCE products Connector type Mini-DIN 6-pin USB (Type A) D-sub 9-pin (female) Light source Visible red semiconductor laser (Wavelength 650 nm) Output 40 µW Pulse duration 1.5 ms Laser class Class 1 Laser Product (IEC 60825-1, FDA (CDRH) Part1040.10*) Reading distance 0 to 177 mm (When the narrow bar width is 0.66 mm) Resolution 0.125 mm min. PCS 0.35 min. Scanning rate 72 scans per second Target codes CODE39, ITF, 2of5(Industrial 2of5), NW-7(Codabar), CODE128, GS1-128, GS1 DataBar, CODE93, JAN/EAN/UPC Readable bar width Maximum 3 to 40 digits (80 digits with CODE128 CODE-C) Ambient light 4800 lux Environmental Ambient temperature 0 to 40°C resistance Relative humidity 35 to 85% RH, No condensation Operating atmosphere No dust or corrosive gas Power supply 5 VDC ±5% Ratings Current consumption 200 mA max. EMI EN 55022, Class B Weight Approx.100 g *The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.

44 HOW TO BE A 1D/2D CODE SPECIALIST WITH PROFESSIONAL SUPPORT FROM KEYENCE 3 STEPS WE NEED TO CHECK FOR STABLE READING

Narrow Bar (NB) Width and Cell Size (CS) 1. NB width is the thickness of the thinnest bar in a barcode, and CS is the size of the smallest 2D code cell (1 square).

0 1 2 3

Reading Distance 2. Reading Distance depends on the NB width or the CS and the specification of each models. We need to check the code’s specifications before we define the true maximum reading distance.

SR-1000 MINIMUM RESOLUTION Unit: mm Distance 2D Barcode Mounting 110 0.063 distance 110 to 140 0.082 0.082 110 to 230 0.14 110 24 110 to 300 0.18 0.11 30 110 to 400 0.24 0.15 110 to 600 0.37 0.22 110 to 1000 0.61 0.37 1000 250 312 Unit: mm

Installation Position 3. Generally speaking, the code readers need to be installed at an angle to reduce specular light. In the case of the SR-1000 Series, mounting at an angle is not necessary because the SR-1000 Series has polarised lighting. Specular Light from Light Code Reader

Specular 15° Light

Make sure to install the reader at an angle.

45 BARCODE

(1) Narrow bar width (NB): Thinnest bars (2) Wide bar width (WB): Thickest bars ④ (3) Narrow space width (NS): Thinnest space (4) Wide space width (WS): Thickest space Ratio - NB:WB = NS:WS = 1:2 to 1:3 Quiet zone Quiet zone ① ③ ② White space of 10 times wider than the narrow bar width: must be included at the beginning and the end of a barcode in order for the reader to identify the beginning and the end of a code.

2D CODE

Cell DataMatrix QR Cell

Quiet zone Quiet zone

Quiet zone Quiet zone (required for the 4 directions surrounding the code) (required for the 4 directions surrounding the code) Quiet zone width  Width of 1 cell QR Alignment pattern  L-shaped part Quiet zone width  Width of 4 cells MicroQR Quiet zone width  Width of 2 cells Alignment pattern  3 corners (QR) or 1 corner (microQR)

TYPES OF 2D CODE VERIFICATION STANDARDS

This section introduces typical code quality verification standards.

ISO/IEC 15415 A 2D code quality verification standard established by the International Organisation for Standardisation. This standard is mainly used for evaluation of 2D codes printed on labels.

ISO/IEC TR 29158 (AIM DPM-1-2006) A 2D code quality verification standard for direct part marking (DPM) established by the Automatic Identification Manufacturers. This standard was established based on ISO/IEC15415 and also standardised by International Organisation for Standardisation in 2011.

46 WOULD YOU LIKE TO LEARN MORE ABOUT AUTO ID TECHNOLOGY ? Free resource guides provide barcode basics, troubleshooting tips, and real applications

Simple & Quick Solutions

KEYENCE draws from its decades of experience to provide the solution and troubleshooting techniques. Valuable knowledge of lighting, optics and 1D/2D codes is available for download.

Comprehensive Guides

References for installation, setup, and operation are also available for download to simplify the integration of KEYENCE barcode readers.

www.barcodereader.com

Your online portal to... A complete knowledge centre to assist you with all of your Auto ID needs

Get Useful Technical Literature FREE!

NB=0.25 mm, NB:WB=1:2.5 NB=0.5 mm, NB:WB=1:2.5 NB=1.0 mm, NB:WB=1:2.5

-A A 128

NB=0.33 mm, bar width ratio=1:2:3:4 NB=0.33 mm, bar width ratio=1:2:3:4 NB=0.25 mm, bar width ratio=1:2:3:4

R 417

Cell size=0.25 mm Cell size=0.25 mm Cell size=0.25 mm Cell size=0.25 mm Aspect Ratio=1:3

Cell size=0.63 mm Cell size=0.63 mm Cell size=0.63 mm Cell size=0.63 mm Aspect Ratio=1:3

www.keyence.com

Coight 2017 C CRR. ll ights eseed. --C9- 107-1 6000