Hand Stretch Film
Total Page：16
File Type：pdf, Size：1020Kb
Load more
Recommended publications
-
Stretch & Shrink Film
Contact your Freedonia Client Services at +1.440.684.9600 or [email protected]. STRETCH & SHRINK FILM Industry Study #3796 | March 2020 This Freedonia industry study analyzes the 2.6 billion pound US stretch and shrink film market. It presents historical demand data (2009, 2014, 2019) and forecasts for 2024 by type (stretch film, shrink film), market (storage & distribution – pallet unitization, bundling and other; product packaging – food, beverages, paper and textile, consumer, other packaging applications), and resin (linear low-density polyethylene, low-density polyethylene, polyvinyl chloride, polypropylene, other resins). Learn More About This Report Report Link: https://hubs.ly/H0nLTtB0 Table of Contents (continued) Table of Contents 1. Executive Summary 9 2. Overview 11 Key Findings 11 Demand by Type & Application 12 Historical Trends 14 Pricing Trends 16 Foreign Trade & International Activity 18 Resin (Multilayer & Metallocene Films) & Machinery Developments 19 Regulatory & Environmental Considerations 21 Pallet Unitization Film 21 PVC Film 21 Recycling 22 Labels 23 3. Stretch Film 24 Key Findings 24 Stretch Film Demand 25 Stretch Film Production Methods (Cast, Blown) 26 Stretch Film Resins 28 Stretch Film Products 30 Demand by Product 30 Stretch Wrap 31 Stretch Hoods 32 Stretch Sleeve Labels 34 Stretch Film Applications 35 Demand by Application 35 Pallet Unitization (Machine Film, Hand Film) 36 Bundling & Other Storage & Distribution 38 Food Packaging 39 Beverage Packaging 41 Paper & Textile Packaging 42 Consumer & Other -
Western Plastics
PACKAGING PRODUCT GUIDE WESTERN PLASTICS LiteWrapper Foil Containers Industrial Packaging Cutterbox Film & Foil Evolution El Dorado Foils Palletwrapper Meat Film HYBRiD80 Wrapmaster CALHOUN, GA TEMECULA, CA MISSISSAUGA, ONT TABLE OF CONTENTS What’s new - New Foil Container Sizes Added - Tape and Perforated Film Dispensers Added - New Perform XL Sizes Industrial Packaging Foodservice Packaging Handywrap Pallet Stretch Wrap on Extended Cores 3 Perforated All Purpose Cling Sheets Perforated to Tear 10 EZ Bander Ultra Cling Cast Stretch Film - Narrow Width 3 Wrapmaster Safety Film Dispenser 10 HYBRiD80 Stiff Formula Micron Pallet Wrap 3 Foilmaster Safety Foil Dispenser 10 Logo Film Custom Printed Stretch Wrap 4 Premium Cutterbox Film 11 Dispensers & Handles 3” Core Banding Film 4 Premium Cutterbox Foil 11 Eco-Max Micron Pallet Wrap 4 Cutterbox Slide Cutter 12 Pallet-Tite Stretch Wrap & Machine Grade Film 5 Produce Film All Purpose Wrap 12 Perform XL Hi-Performance Machine Film 5 Mill Roll Film All Purpose Foodservice Wrap 12 Identi Film Color Tinted Pallet Wrap 6 Perforated Dispenser 12 Securi Wrap True Opaque Stretch Film 6 “Safe Handling” Printed Meat Film 12 WrapNet Soft Knitted Pallet Wrap 7 El Dorado Economy Aluminum Foil Rolls 13 Airflow Vented Stretch Wrap 7 Interfolded Foil Sheets Pop-Up Aluminum Foil Sheets 13 Litewrapper Source Reduction Wrap and Dispenser 7 Shrink Films Perforated to Tear 13 Evolution Entry Level Wrapper 7 All Purpose Meat Film - Machine and Handwrap 14 Cover-All “Pallet Cover” Top Sheeting Film 8 Foil Containers - Rounds Aluminum Rounds and Lids 15 AutoBander Narrow Width Machine Rolls 8 Foil Containers - Steam Table Foil Containers and Trays 15 Stretch-It DSF Static Dissipative Film 8 Cater Trays 15 PVC Printers Wrap Cling and Shrink Films 8 Weather All UVI Hand and Machine Film 8 XP Film Hi-Performance Prestretched Pallet Wrap 9 Get more at Laundry Wrap All Purpose PVC Overwrap 9 Bandit Carton Sealing Tape 9 wplastics.com Pallet Stretch Wrap on Disposable HandyWrap Extended Core Handles ITEM NO. -
Say NO to Plastic Bags Introduction
Say NO to Plastic Bags Introduction Plastic bags are littering our streets and waterways, and clogging the processing machines at our transfer stations. Some communities have attempted to address the problem using one of three methods. Could any of these work in your community? Bag Bans ▪ Plastic bag bans are placed on a state, city, or town level and can be regulated by code enforcement officers who periodically visit vendors to ensure they are following the regulations. ▪ Violators will be penalized with a fine. Bag Bans ▪ Ban the distribution of plastic bags by chain retailers within a community. ▪ Cuts off supply of plastic bags at the source. ▪ Some bans are based on square footage of the business, i.e.. Retail establishments or food providers with greater than 10,000 square feet in specific store size must comply with the ban. ▪ Small businesses are harder to regulate but are usually brought under the regulation over time. Bag Bans ▪ Works very well in some areas ▪ In Portland Oregon, since 2013, the ban caused a reusable bag use increase of 304% while paper bag use jumped 491%. ▪ Some vendors have found loopholes to this method. ▪ Austin, Texas and Honolulu, Hawaii placed a ban that initially only included bags that were 4- millimeter thick or less. ▪ This caused retailers to start using thicker plastic bags, greater than 4mm that still ended up in the waste stream. ▪ Barrington, Rhode Island ran into the same loophole after enacting the ‘Reusable Check- out Bag Initiative’. ▪ Shaw’s and CVS seized the opportunity and introduced a so called reusable plastic bag that was thicker than the 2.25-millimeter limit. -
Choosing the Right Method for Wrapping Pallets
C o p y r i g h t , C S C P u b l i s h i n g , P o w Choosing the right method for wrapping pallets d e r a n d B u l k Uffe S. Kristiansen Lachenmeier A/S E n g i n e he most common mistake in e Selecting the best method for secur- ple costo de la maquinaria y el r i choosing a method for wrapping n ing loaded pallets depends on sev- material de empaque. Este artículo g pallets is to focus on only two I eral factors, not just the cost of the enumera los factores y examina n T t factors: the cost of packaging material e machinery and the packaging tres opciones para empacar pale- r and the cost of the machine. These are n material. This article lists these fac- a tas: envoltura por elástico, en- t i important factors, of course, but they o tors and examines three pallet- voltura con elástico termosensible y n show you only half the picture. a wrapping options: conventional estirado de forro. l stretch-wrapping, thermal shrink- wrapping, and hood-stretching. Other important factors to consider are labor requirements, storage, energy Choisir la bonne méthode pour cost, capacity, customer acceptance, and l’enveloppage des palettes after-sale service. Le choix de la meilleure méth- ode pour la consolidation de Labor requirements. If you choose a chargements de palette tient less-expensive semi-automatic machine compte de plusieurs facteurs, instead of a fully automatic one, will the pas seulement du coût de la ma- savings be consumed by the extra labor chinerie ou du matériel d’em- needed to operate the machine? ballage. -
HVAC REPLACEMENT JUVENILE HOUSING FACILITY 881 Minnesota Street Wichita, Kansas
HVAC REPLACEMENT JUVENILE HOUSING FACILITY 881 Minnesota Street Wichita, Kansas BID NUMBER # 21-0036 June 2021 ▪ 1726 South Hillside ▪ Wichita, Kansas 67211 ▪ (316) 683-8965 phone ▪ INDEX TO SPECIFICATIONS Sedgwick County Juvenile Residential Facility HVAC Replacement DIVISION 1 – GENERAL REQUIREMENTS Section 00300 ..... Special Conditions ......................................................................................... 7 page DIVISION 21 – FIRE SUPPRESSION Section 210500 ... Common Work Results for Fire Suppression ................................................ 12 pages Section 211313 ... Wet-Pipe Sprinkler Systems .......................................................................... 15 pages DIVISION 23 – HEATING VENTILATING AND AIR CONDITIONING Section 230000 ... General Mechanical Requirements ............................................................... 9 pages Section 230517 ... Sleeves and Sleeve Seals for HVAC Piping .................................................. 3 pages Section 230529 ... Hangers and Supports for HVAC Piping and Equipment ............................ 7 pages Section 230553 ... Identification for HVAC Piping and Equipment .......................................... 4 pages Section 230593 ... Testing, Adjusting & Balancing for HVAC ................................................. 12 pages Section 230713 ... Duct Insulation ............................................................................................. 16 pages Section 230719 ... HVAC Piping Insulation ............................................................................. -
Test Data – Dupont™ Tyvek® Air Cargo Covers
Temperature-Sensitive Cargo Protection Complies with Time & Temperature Sensitive Cargo Regulations ™ ® TEST DATA – DUPONT TYVEK AIR CARGO COVERS DuPont™ Tyvek® Air Cargo Covers provide excellent Temperature comparison ‘all-in-one’ protection against temperature excursions Control (stretch wrap) When it comes to managing the risk of temperature excursions throughout the cold chain, protecting your products against ambient temperature extremes is important. However, solar ºC radiation may be the most critical–and under-appreciated–threat you face. That’s because 56.2 solar radiation is the leading cause of high-temperature spikes on the tarmac. We have conducted various trials for the Tyvek® Air Cargo Covers (including an environmental chamber test, sun exposure trial and real life scenario trial). Please contact AmSafe Bridport (details overleaf) to request the full Qualification Report and the Validation Reports. Are you focused on the right R? Reflectivity or R-value? Tyvek® Air Cargo Cover Tyvek® Air Cargo Covers offer multi-threat protection that helps reduce temperature excursions by providing: 22ºC Superior protection from solar radiation as a result of their unique reflective outer surface Excellent protection from ambient temperature extremes–hot and cold–without the weight or bulk of alternative covers Simply stated, Tyvek® Air Cargo Covers provide excellent ‘all-in-one’ protection against the threats of solar radiation Test conditions: covered pallets on simulated tarmac in Lakeland, FL, November 2012 at ~11 a.m. Full sun with and extreme ambient temperatures. ambient temperature at 20°C. Giving you peace of mind that your cargo will reach its destination safely amsafebridport.com/cargo Solar radiation technical study At low thermal mass (empty boxes in test case below), the temperature inside a pallet can far exceed ambient temperature3. -
Packaging, Labeling, and Shipping Requirements
0 Rev 1 Packaging, Labeling, and Shipping Requirements Commercial Lighting Packaging, Labeling, and Shipping Requirements September 2019 Racine, Wisconsin, USA LSC016 1 Rev 1 Packaging, Labeling, and Shipping Requirements Contents 1.0 Introduction ................................................................................................................................. 3 1.1 Compliance .................................................................................................................................... 3 1.2 AIAG Guidelines ............................................................................................................................. 3 2.0 Primary Container Requirements ................................................................................................. 4 2.1 Selection of a Primary Container .................................................................................................... 4 2.1.1 Container Size ......................................................................................................................... 5 2.1.2 Container Sealing .................................................................................................................... 5 3.0 Internal Part Protection Required ...................................................................................................... 5 4.0 Pallet Requirements .......................................................................................................................... 5 5.0 Unitization and Palletization -
Publication 2, January 2002
Packaging for Mailing — Contents Publication 2, January 2002 TRANSMITTAL LETTER 5. MARKING CONTENTS 6. BULK MAIL CENTER STANDARDS 7. HAZARDOUS MATERIALS 1. PACKAGING ADEQUACY APPENDIXES 2. CONTAINERS A — PACKAGE TESTING 3. CUSHIONING B — RATES AND CLASSIFICATION 4. CLOSING, SEALING, AND SERVICE CENTERS (RCSCS) REINFORCING R Packaging for Mailing Publication 2 January 2002 Transmittal Letter A. Explanation. This publication supplements the standards in Domestic Mail Manual (DMM) C010. It provides mailers and postal personnel with information on how to properly package items for mailing. Proper packaging prior to mailing is necessary to prevent deterioration and degradation of a mailpiece and its contents. B. Distribution and Requisition. Additional copies can be ordered as follows: H Public. Call the Material Distribution Center (MDC) at 800-332-0317 (option 4). This publication is also available on the Internet at http://www.usps.com — click on Info, then Postal Periodicals and Publications, then Publications (either PDF Format or Text Format), and then Pub 2. H Postal Service. Order by telephone, cc:Mail, or official mail as follows: — Touch Tone Order Entry: Call 800-332-0317, option 1, then option 2. — cc:Mail: Send an F3Fill-completed PS Form 7380, MDC Supply Requisition, by cc:Mail to MDC Customer Service at TOKS001L. — Official Mail: Send a completed PS Form 7380, MDC Supply Requisition, to the following address: SUPPLY REQUISITIONS 500 SW GARY ORMSBY DR TOPEKA KS 66624-9702 This publication is also available on the corporate intranet at http://blue.usps.gov — click on Information, then Policies and Procedures, then Pubs, and then the title of the publication. -
Supplier Packaging Guidelines Hyster-Yale Group
Page 1 of 26 Supplier Packaging Guidelines For Locations in North America Hyster-Yale Group Revision 2 October 21, 2016 This is a controlled document with the electronic read-only domain, accessed from the HYG Master Index. Any person in possession of a printed copy of this parent document, or cited appendices, has an uncontrolled copy and should refer to the Master Index or approved web site for revision level status. ©Hyster-Yale Group, Incorporated. All rights reserved. DCN 36243 Rev. 2 Effective Date: 21 October 2016 HYG Supplier Packaging Guidelines Page 2 of 26 Table of Contents 1 INTRODUCTION ............................................................................................................................ 4 1.1 SCOPE .................................................................................................................................... 4 1.2 PURPOSE ............................................................................................................................... 4 2 ACCEPTABLE PACKAGING ............................................................................................................. 4 2.1 EXPENDABLE PACKAGING ...................................................................................................... 4 2.1.1 BAGS ............................................................................................................................... 4 2.1.2 CORRUGATED CARTONS ................................................................................................. 5 2.1.2.1 -
Cor-Pak® Stretch Hoods Powered by Nano Vpci®
Cor-Pak® Stretch Hoods powered by Nano VpCI® PRODUCT DESCRIPTION Stretch hoods are among the fast- est growing packaging techniques for shipment of palletized goods. Cortec® offers specifically de- signed plastomer material solu- tions for stretch hood packaging. Cor-Pak® Stretch Hoods powered by Nano VpCI® are the ultimate high-performance stretch hood films for corrosion protection of ferrous and non-ferrous metals. The film is suitable for industrial use to stabilize loads and ensure pallet integrity for efficient pack- aging and delivery. This film is co-extruded using state of-the-art resins, offering superior strength and stretch characteristics as well as multi-metal corrosion inhib- iting properties that only VpCI® technology can deliver. Cor-Pak® Stretch Hood Film powered by PACKAGING AND STORAGE ® Nano VpCI delivers puncture re- ® sistance and load holding, which Cor-Pak Stretch Hoods are available in pallet sizes and custom made. ® allows a user to down-gauge, con- Contact EcoCortec Customer Service for custom requirements. tain aggressive loads and produce To ensure best product performance, store in original packaging, indoors, a better package at reduced cost. and out of direct sunlight at 4- 38 °C (40-100 °F). Shelf life: 2 years The combination of enhanced polyethylene resins with VpCI® FEATURES Technology makes Cor-Pak® Stretch Hoods powered by Nano • Elastic (788.4% elongation at ® VpCI the most advanced corro- break) sion inhibiting stretch film avail- able today on the market. • Excellent puncture resistance • Meets NACE TM0208-2018 ® Cor-Pak Stretch Hoods can eas- standard for corrosion ily be recycled and are compatible with commercially available man- protection ual and automatic stretch wrap- • Meets German TL-8135- ® ping equipment. -
Filament Tape Product Guide Filament & Mopp Tapes
FILAMENT TAPE PRODUCT GUIDE FILAMENT & MOPP TAPES Intertape®.brand.fiberglass.and.polyester.reinforced.Filament.Tape.delivers.superior.adhesion.for.a. variety.of.light.to.medium.load.applications..Intertape®.brand.MOPP.Strapping.Tape.utilizes.mono- oriented.tensilized.polypropylene.for.light.duty.strapping,.palletizing.and.bundling. Tensile Adhesion Thickness Elongation P ERFORMANCE GRADE lb/in N/25mm oz/in N/25mm mils mm % Bi-directional.paper-backed;.natural;. RA6 resistant.to.curling.and.pig-tailing;.adhesive. 107.0 468 50.0 13.7 12.4 0.32 4.0 temperature.resistant.up.to.400°F/205°C Polyester.film.backed;.woven.bi-directional. 745 fiberglass.reinforced;.resistant.to.curling.and. 90.0 394 75.0 20.5 7.3 0.19 3.5 pig-tailing Clear,.red,.blue,.black;.high.strength;.polyester. RP3 reinforcements;.industrial.grade;.meets.ASTM. 254.0 1,112 40.0 11.0 9.4 0.24 25.0 D-5330.Type.1 Medium.tensile;.cold.temperature. RG9 148.0 648 19.0 5.2 5.6 0.14 3.5 performance High .strength;.polyester.reinforcements;. RP24 272.0 1,191 38.0 10.4 10.2 0.26 27.0 primarily.for.“Lift.Flap”.closures P GREMIUM RADE BOPP†.backed;.thin.profile.for.medium.to. RG316 heavy.duty.use;.ideal.for.moderate.industrial. 300.0 1,313 70.0 19.2 6.1 0.16 4.0 packaging Polyester.backed;.very.high.tensile.strength;. RG16 333.0 1,458 40.0 10.9 8.5 0.22 4.5 ideal.for.heavy.duty.industrial.applications Black;.polyester.backed;.high.tensile.strength;. -
Federal Register/Vol. 69, No. 38/Thursday, February
Federal Register / Vol. 69, No. 38 / Thursday, February 26, 2004 / Proposed Rules 8899 authorities and other actions based on comments to the Office of Management Please use the rear entrance to the ownership, control, and violation and Budget, Office of Information and building and have photo identification information; providing applicant, Regulatory Affairs, Attention: Interior with you. operator, and ownership and control Desk Officer, via e-mail to These hearings will be open to anyone information; improvidently issued State [email protected], or via who would like to attend and/or testify. permits; and alternative enforcement. facsimile to 202–365–6566. The primary purpose of the public Additional information is contained in See the SUPPLEMENTARY INFORMATION hearing is to obtain your views on the the proposed rule published on section for hearing addresses. proposed rule so that we can prepare a December 29, 2003. FOR FURTHER INFORMATION CONTACT: complete and objective analysis. A The comment period on the proposed David G. Hartos, Office of Surface public hearing is not an adversarial rule was scheduled to close on February Mining Reclamation and Enforcement, process and, therefore, we encourage 27, 2004. In response to a request from U.S. Department of the Interior, 3 you to limit your testimony to the members of the public, we are extending Parkway Center, Pittsburgh, PA 15220; proposed rule. We appreciate any and the public comment period to March 29, Telephone: 412–937–2909. E-mail all comments, but those most useful and 2004. address: [email protected]. Additional likely to influence decisions on the final Dated: February 19, 2004.